diff options
Diffstat (limited to 'include/xxhash.h')
| -rw-r--r-- | include/xxhash.h | 3688 |
1 files changed, 3422 insertions, 266 deletions
diff --git a/include/xxhash.h b/include/xxhash.h index 826f39bd..006d3f3d 100644 --- a/include/xxhash.h +++ b/include/xxhash.h @@ -197,6 +197,7 @@ extern "C" { #define XXH_CAT(A, B) A##B #define XXH_NAME2(A, B) XXH_CAT(A, B) #define XXH_versionNumber XXH_NAME2(XXH_NAMESPACE, XXH_versionNumber) + /* XXH32 */ #define XXH32 XXH_NAME2(XXH_NAMESPACE, XXH32) #define XXH32_createState XXH_NAME2(XXH_NAMESPACE, XXH32_createState) #define XXH32_freeState XXH_NAME2(XXH_NAMESPACE, XXH32_freeState) @@ -208,6 +209,7 @@ extern "C" { XXH_NAME2(XXH_NAMESPACE, XXH32_canonicalFromHash) #define XXH32_hashFromCanonical \ XXH_NAME2(XXH_NAMESPACE, XXH32_hashFromCanonical) + /* XXH64 */ #define XXH64 XXH_NAME2(XXH_NAMESPACE, XXH64) #define XXH64_createState XXH_NAME2(XXH_NAMESPACE, XXH64_createState) #define XXH64_freeState XXH_NAME2(XXH_NAMESPACE, XXH64_freeState) @@ -219,14 +221,50 @@ extern "C" { XXH_NAME2(XXH_NAMESPACE, XXH64_canonicalFromHash) #define XXH64_hashFromCanonical \ XXH_NAME2(XXH_NAMESPACE, XXH64_hashFromCanonical) + /* XXH3_64bits */ + #define XXH3_64bits XXH_NAME2(XXH_NAMESPACE, XXH3_64bits) + #define XXH3_64bits_withSecret \ + XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_withSecret) + #define XXH3_64bits_withSeed XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_withSeed) + #define XXH3_createState XXH_NAME2(XXH_NAMESPACE, XXH3_createState) + #define XXH3_freeState XXH_NAME2(XXH_NAMESPACE, XXH3_freeState) + #define XXH3_copyState XXH_NAME2(XXH_NAMESPACE, XXH3_copyState) + #define XXH3_64bits_reset XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_reset) + #define XXH3_64bits_reset_withSeed \ + XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_reset_withSeed) + #define XXH3_64bits_reset_withSecret \ + XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_reset_withSecret) + #define XXH3_64bits_update XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_update) + #define XXH3_64bits_digest XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_digest) + #define XXH3_generateSecret XXH_NAME2(XXH_NAMESPACE, XXH3_generateSecret) + /* XXH3_128bits */ + #define XXH128 XXH_NAME2(XXH_NAMESPACE, XXH128) + #define XXH3_128bits XXH_NAME2(XXH_NAMESPACE, XXH3_128bits) + #define XXH3_128bits_withSeed \ + XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_withSeed) + #define XXH3_128bits_withSecret \ + XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_withSecret) + #define XXH3_128bits_reset XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_reset) + #define XXH3_128bits_reset_withSeed \ + XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_reset_withSeed) + #define XXH3_128bits_reset_withSecret \ + XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_reset_withSecret) + #define XXH3_128bits_update XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_update) + #define XXH3_128bits_digest XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_digest) + #define XXH128_isEqual XXH_NAME2(XXH_NAMESPACE, XXH128_isEqual) + #define XXH128_cmp XXH_NAME2(XXH_NAMESPACE, XXH128_cmp) + #define XXH128_canonicalFromHash \ + XXH_NAME2(XXH_NAMESPACE, XXH128_canonicalFromHash) + #define XXH128_hashFromCanonical \ + XXH_NAME2(XXH_NAMESPACE, XXH128_hashFromCanonical) #endif /* ************************************* * Version ***************************************/ #define XXH_VERSION_MAJOR 0 - #define XXH_VERSION_MINOR 7 - #define XXH_VERSION_RELEASE 4 + #define XXH_VERSION_MINOR 8 + #define XXH_VERSION_RELEASE 0 #define XXH_VERSION_NUMBER \ (XXH_VERSION_MAJOR * 100 * 100 + XXH_VERSION_MINOR * 100 + \ XXH_VERSION_RELEASE) @@ -401,145 +439,56 @@ XXH_PUBLIC_API void XXH64_canonicalFromHash(XXH64_canonical_t *dst, XXH_PUBLIC_API XXH64_hash_t XXH64_hashFromCanonical(const XXH64_canonical_t *src); - #endif /* XXH_NO_LONG_LONG */ - -#endif /* XXHASH_H_5627135585666179 */ - -#if defined(XXH_STATIC_LINKING_ONLY) && !defined(XXHASH_H_STATIC_13879238742) - #define XXHASH_H_STATIC_13879238742 -/* **************************************************************************** - * This section contains declarations which are not guaranteed to remain stable. - * They may change in future versions, becoming incompatible with a different - * version of the library. - * These declarations should only be used with static linking. - * Never use them in association with dynamic linking! - ***************************************************************************** - */ +/*-********************************************************************** + * XXH3 64-bit variant + ************************************************************************/ -/* - * These definitions are only present to allow static allocation of an XXH - * state, for example, on the stack or in a struct. - * Never **ever** access members directly. +/* ************************************************************************ + * XXH3 is a new hash algorithm featuring: + * - Improved speed for both small and large inputs + * - True 64-bit and 128-bit outputs + * - SIMD acceleration + * - Improved 32-bit viability + * + * Speed analysis methodology is explained here: + * + * https://fastcompression.blogspot.com/2019/03/presenting-xxh3.html + * + * In general, expect XXH3 to run about ~2x faster on large inputs and >3x + * faster on small ones compared to XXH64, though exact differences depend on + * the platform. + * + * The algorithm is portable: Like XXH32 and XXH64, it generates the same hash + * on all platforms. + * + * It benefits greatly from SIMD and 64-bit arithmetic, but does not require it. + * + * Almost all 32-bit and 64-bit targets that can run XXH32 smoothly can run + * XXH3 at competitive speeds, even if XXH64 runs slowly. Further details are + * explained in the implementation. + * + * Optimized implementations are provided for AVX512, AVX2, SSE2, NEON, POWER8, + * ZVector and scalar targets. This can be controlled with the XXH_VECTOR macro. + * + * XXH3 offers 2 variants, _64bits and _128bits. + * When only 64 bits are needed, prefer calling the _64bits variant, as it + * reduces the amount of mixing, resulting in faster speed on small inputs. + * + * It's also generally simpler to manipulate a scalar return type than a struct. + * + * The 128-bit version adds additional strength, but it is slightly slower. + * + * Return values of XXH3 and XXH128 are officially finalized starting + * with v0.8.0 and will no longer change in future versions. + * Avoid storing values from before that release in long-term storage. + * + * Results produced by v0.7.x are not comparable with results from v0.7.y. + * However, the API is completely stable, and it can safely be used for + * ephemeral data (local sessions). + * + * The API supports one-shot hashing, streaming mode, and custom secrets. */ -struct XXH32_state_s { - - XXH32_hash_t total_len_32; - XXH32_hash_t large_len; - XXH32_hash_t v1; - XXH32_hash_t v2; - XXH32_hash_t v3; - XXH32_hash_t v4; - XXH32_hash_t mem32[4]; - XXH32_hash_t memsize; - XXH32_hash_t - reserved; /* never read nor write, might be removed in a future version */ - -}; /* typedef'd to XXH32_state_t */ - - #ifndef XXH_NO_LONG_LONG /* defined when there is no 64-bit support */ - -struct XXH64_state_s { - - XXH64_hash_t total_len; - XXH64_hash_t v1; - XXH64_hash_t v2; - XXH64_hash_t v3; - XXH64_hash_t v4; - XXH64_hash_t mem64[4]; - XXH32_hash_t memsize; - XXH32_hash_t reserved32; /* required for padding anyway */ - XXH64_hash_t reserved64; /* never read nor write, might be removed in a future - version */ - -}; /* typedef'd to XXH64_state_t */ - - /*-********************************************************************** - * XXH3 - * New experimental hash - ************************************************************************/ - - /* ************************************************************************ - * XXH3 is a new hash algorithm featuring: - * - Improved speed for both small and large inputs - * - True 64-bit and 128-bit outputs - * - SIMD acceleration - * - Improved 32-bit viability - * - * Speed analysis methodology is explained here: - * - * https://fastcompression.blogspot.com/2019/03/presenting-xxh3.html - * - * In general, expect XXH3 to run about ~2x faster on large inputs and >3x - * faster on small ones compared to XXH64, though exact differences depend on - * the platform. - * - * The algorithm is portable: Like XXH32 and XXH64, it generates the same hash - * on all platforms. - * - * It benefits greatly from SIMD and 64-bit arithmetic, but does not require - * it. - * - * Almost all 32-bit and 64-bit targets that can run XXH32 smoothly can run - * XXH3 at competitive speeds, even if XXH64 runs slowly. Further details are - * explained in the implementation. - * - * Optimized implementations are provided for AVX512, AVX2, SSE2, NEON, - * POWER8, ZVector and scalar targets. This can be controlled with the - * XXH_VECTOR macro. - * - * XXH3 offers 2 variants, _64bits and _128bits. - * When only 64 bits are needed, prefer calling the _64bits variant, as it - * reduces the amount of mixing, resulting in faster speed on small inputs. - * - * It's also generally simpler to manipulate a scalar return type than a - * struct. - * - * The 128-bit version adds additional strength, but it is slightly slower. - * - * The XXH3 algorithm is still in development. - * The results it produces may still change in future versions. - * - * Results produced by v0.7.x are not comparable with results from v0.7.y. - * However, the API is completely stable, and it can safely be used for - * ephemeral data (local sessions). - * - * Avoid storing values in long-term storage until the algorithm is finalized. - * - * Since v0.7.3, XXH3 has reached "release candidate" status, meaning that, if - * everything remains fine, its current format will be "frozen" and become the - * final one. - * - * After which, return values of XXH3 and XXH128 will no longer change in - * future versions. - * - * XXH3's return values will be officially finalized upon reaching v0.8.0. - * - * The API supports one-shot hashing, streaming mode, and custom secrets. - */ - - #ifdef XXH_NAMESPACE - #define XXH3_64bits XXH_NAME2(XXH_NAMESPACE, XXH3_64bits) - #define XXH3_64bits_withSecret \ - XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_withSecret) - #define XXH3_64bits_withSeed \ - XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_withSeed) - - #define XXH3_createState XXH_NAME2(XXH_NAMESPACE, XXH3_createState) - #define XXH3_freeState XXH_NAME2(XXH_NAMESPACE, XXH3_freeState) - #define XXH3_copyState XXH_NAME2(XXH_NAMESPACE, XXH3_copyState) - - #define XXH3_64bits_reset XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_reset) - #define XXH3_64bits_reset_withSeed \ - XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_reset_withSeed) - #define XXH3_64bits_reset_withSecret \ - XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_reset_withSecret) - #define XXH3_64bits_update XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_update) - #define XXH3_64bits_digest XXH_NAME2(XXH_NAMESPACE, XXH3_64bits_digest) - - #define XXH3_generateSecret XXH_NAME2(XXH_NAMESPACE, XXH3_generateSecret) - #endif - /* XXH3_64bits(): * default 64-bit variant, using default secret and default seed of 0. * It's the fastest variant. */ @@ -547,8 +496,8 @@ XXH_PUBLIC_API XXH64_hash_t XXH3_64bits(const void *data, size_t len); /* * XXH3_64bits_withSeed(): - * This variant generates a custom secret on the fly based on the default - * secret, altered using the `seed` value. + * This variant generates a custom secret on the fly + * based on default secret altered using the `seed` value. * While this operation is decently fast, note that it's not completely free. * Note: seed==0 produces the same results as XXH3_64bits(). */ @@ -559,74 +508,28 @@ XXH_PUBLIC_API XXH64_hash_t XXH3_64bits_withSeed(const void *data, size_t len, * XXH3_64bits_withSecret(): * It's possible to provide any blob of bytes as a "secret" to generate the * hash. This makes it more difficult for an external actor to prepare an - * intentional collision. secretSize *must* be large enough (>= - * XXH3_SECRET_SIZE_MIN). The hash quality depends on the secret's high - * entropy, meaning that the secret should look like a bunch of random - * bytes. Avoid "trivial" sequences such as text or a bunch of repeated - * characters. If you are unsure of the "randonmess" of the blob of bytes, - * consider making it a "custom seed" instead, - * and use "XXH_generateSecret()" to generate a high quality secret. + * intentional collision. The main condition is that secretSize *must* be + * large enough (>= XXH3_SECRET_SIZE_MIN). However, the quality of produced + * hash values depends on secret's entropy. Technically, the secret must + * look like a bunch of random bytes. Avoid "trivial" or structured data + * such as repeated sequences or a text document. Whenever unsure about the + * "randomness" of the blob of bytes, consider relabelling it as a "custom + * seed" instead, and employ "XXH3_generateSecret()" (see below) to generate + * a high entropy secret derived from the custom seed. */ #define XXH3_SECRET_SIZE_MIN 136 XXH_PUBLIC_API XXH64_hash_t XXH3_64bits_withSecret(const void *data, size_t len, const void *secret, size_t secretSize); - /* streaming 64-bit */ - - #if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 201112L) /* C11+ */ - #include <stdalign.h> - #define XXH_ALIGN(n) alignas(n) - #elif defined(__GNUC__) - #define XXH_ALIGN(n) __attribute__((aligned(n))) - #elif defined(_MSC_VER) - #define XXH_ALIGN(n) __declspec(align(n)) - #else - #define XXH_ALIGN(n) /* disabled */ - #endif - - /* Old GCC versions only accept the attribute after the type in structures. - */ - #if !(defined(__STDC_VERSION__) && \ - (__STDC_VERSION__ >= 201112L)) /* C11+ */ \ - && defined(__GNUC__) - #define XXH_ALIGN_MEMBER(align, type) type XXH_ALIGN(align) - #else - #define XXH_ALIGN_MEMBER(align, type) XXH_ALIGN(align) type - #endif - -typedef struct XXH3_state_s XXH3_state_t; - - #define XXH3_INTERNALBUFFER_SIZE 256 - #define XXH3_SECRET_DEFAULT_SIZE 192 -struct XXH3_state_s { - - XXH_ALIGN_MEMBER(64, XXH64_hash_t acc[8]); - /* used to store a custom secret generated from a seed */ - XXH_ALIGN_MEMBER(64, unsigned char customSecret[XXH3_SECRET_DEFAULT_SIZE]); - XXH_ALIGN_MEMBER(64, unsigned char buffer[XXH3_INTERNALBUFFER_SIZE]); - XXH32_hash_t bufferedSize; - XXH32_hash_t reserved32; - size_t nbStripesPerBlock; - size_t nbStripesSoFar; - size_t secretLimit; - XXH64_hash_t totalLen; - XXH64_hash_t seed; - XXH64_hash_t reserved64; - const unsigned char *extSecret; /* reference to external secret; - * if == NULL, use .customSecret instead */ - /* note: there may be some padding at the end due to alignment on 64 bytes */ - -}; /* typedef'd to XXH3_state_t */ - - #undef XXH_ALIGN_MEMBER - +/******* Streaming *******/ /* * Streaming requires state maintenance. * This operation costs memory and CPU. * As a consequence, streaming is slower than one-shot hashing. - * For better performance, prefer one-shot functions whenever possible. + * For better performance, prefer one-shot functions whenever applicable. */ +typedef struct XXH3_state_s XXH3_state_t; XXH_PUBLIC_API XXH3_state_t *XXH3_createState(void); XXH_PUBLIC_API XXH_errorcode XXH3_freeState(XXH3_state_t *statePtr); XXH_PUBLIC_API void XXH3_copyState(XXH3_state_t * dst_state, @@ -634,8 +537,8 @@ XXH_PUBLIC_API void XXH3_copyState(XXH3_state_t * dst_state, /* * XXH3_64bits_reset(): - * Initialize with the default parameters. - * The result will be equivalent to `XXH3_64bits()`. + * Initialize with default parameters. + * digest will be equivalent to `XXH3_64bits()`. */ XXH_PUBLIC_API XXH_errorcode XXH3_64bits_reset(XXH3_state_t *statePtr); /* @@ -647,9 +550,12 @@ XXH_PUBLIC_API XXH_errorcode XXH3_64bits_reset_withSeed(XXH3_state_t *statePtr, XXH64_hash_t seed); /* * XXH3_64bits_reset_withSecret(): - * `secret` is referenced, and must outlive the hash streaming session, so - * be careful when using stack arrays. - * `secretSize` must be >= `XXH3_SECRET_SIZE_MIN`. + * `secret` is referenced, it _must outlive_ the hash streaming session. + * Similar to one-shot API, `secretSize` must be >= `XXH3_SECRET_SIZE_MIN`, + * and the quality of produced hash values depends on secret's entropy + * (secret's content should look like a bunch of random bytes). + * When in doubt about the randomness of a candidate `secret`, + * consider employing `XXH3_generateSecret()` instead (see below). */ XXH_PUBLIC_API XXH_errorcode XXH3_64bits_reset_withSecret( XXH3_state_t *statePtr, const void *secret, size_t secretSize); @@ -659,31 +565,12 @@ XXH_PUBLIC_API XXH_errorcode XXH3_64bits_update(XXH3_state_t *statePtr, size_t length); XXH_PUBLIC_API XXH64_hash_t XXH3_64bits_digest(const XXH3_state_t *statePtr); - /* 128-bit */ - - #ifdef XXH_NAMESPACE - #define XXH128 XXH_NAME2(XXH_NAMESPACE, XXH128) - #define XXH3_128bits XXH_NAME2(XXH_NAMESPACE, XXH3_128bits) - #define XXH3_128bits_withSeed \ - XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_withSeed) - #define XXH3_128bits_withSecret \ - XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_withSecret) - - #define XXH3_128bits_reset XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_reset) - #define XXH3_128bits_reset_withSeed \ - XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_reset_withSeed) - #define XXH3_128bits_reset_withSecret \ - XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_reset_withSecret) - #define XXH3_128bits_update XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_update) - #define XXH3_128bits_digest XXH_NAME2(XXH_NAMESPACE, XXH3_128bits_digest) - - #define XXH128_isEqual XXH_NAME2(XXH_NAMESPACE, XXH128_isEqual) - #define XXH128_cmp XXH_NAME2(XXH_NAMESPACE, XXH128_cmp) - #define XXH128_canonicalFromHash \ - XXH_NAME2(XXH_NAMESPACE, XXH128_canonicalFromHash) - #define XXH128_hashFromCanonical \ - XXH_NAME2(XXH_NAMESPACE, XXH128_hashFromCanonical) - #endif +/* note : canonical representation of XXH3 is the same as XXH64 + * since they both produce XXH64_hash_t values */ + +/*-********************************************************************** + * XXH3 128-bit variant + ************************************************************************/ typedef struct { @@ -692,16 +579,28 @@ typedef struct { } XXH128_hash_t; -XXH_PUBLIC_API XXH128_hash_t XXH128(const void *data, size_t len, - XXH64_hash_t seed); XXH_PUBLIC_API XXH128_hash_t XXH3_128bits(const void *data, size_t len); -XXH_PUBLIC_API XXH128_hash_t XXH3_128bits_withSeed( - const void *data, size_t len, XXH64_hash_t seed); /* == XXH128() */ +XXH_PUBLIC_API XXH128_hash_t XXH3_128bits_withSeed(const void *data, size_t len, + XXH64_hash_t seed); XXH_PUBLIC_API XXH128_hash_t XXH3_128bits_withSecret(const void *data, size_t len, const void *secret, size_t secretSize); +/******* Streaming *******/ +/* + * Streaming requires state maintenance. + * This operation costs memory and CPU. + * As a consequence, streaming is slower than one-shot hashing. + * For better performance, prefer one-shot functions whenever applicable. + * + * XXH3_128bits uses the same XXH3_state_t as XXH3_64bits(). + * Use already declared XXH3_createState() and XXH3_freeState(). + * + * All reset and streaming functions have same meaning as their 64-bit + * counterpart. + */ + XXH_PUBLIC_API XXH_errorcode XXH3_128bits_reset(XXH3_state_t *statePtr); XXH_PUBLIC_API XXH_errorcode XXH3_128bits_reset_withSeed(XXH3_state_t *statePtr, XXH64_hash_t seed); @@ -713,7 +612,10 @@ XXH_PUBLIC_API XXH_errorcode XXH3_128bits_update(XXH3_state_t *statePtr, size_t length); XXH_PUBLIC_API XXH128_hash_t XXH3_128bits_digest(const XXH3_state_t *statePtr); -/* Note: For better performance, these functions can be inlined using +/* Following helper functions make it possible to compare XXH128_hast_t values. + * Since XXH128_hash_t is a structure, this capability is not offered by the + * language. + * Note: For better performance, these functions can be inlined using * XXH_INLINE_ALL */ /*! @@ -745,6 +647,116 @@ XXH_PUBLIC_API void XXH128_canonicalFromHash(XXH128_canonical_t *dst, XXH_PUBLIC_API XXH128_hash_t XXH128_hashFromCanonical(const XXH128_canonical_t *src); + #endif /* XXH_NO_LONG_LONG */ + +#endif /* XXHASH_H_5627135585666179 */ + +#if defined(XXH_STATIC_LINKING_ONLY) && !defined(XXHASH_H_STATIC_13879238742) + #define XXHASH_H_STATIC_13879238742 +/* **************************************************************************** + * This section contains declarations which are not guaranteed to remain stable. + * They may change in future versions, becoming incompatible with a different + * version of the library. + * These declarations should only be used with static linking. + * Never use them in association with dynamic linking! + ***************************************************************************** + */ + +/* + * These definitions are only present to allow static allocation + * of XXH states, on stack or in a struct, for example. + * Never **ever** access their members directly. + */ + +struct XXH32_state_s { + + XXH32_hash_t total_len_32; + XXH32_hash_t large_len; + XXH32_hash_t v1; + XXH32_hash_t v2; + XXH32_hash_t v3; + XXH32_hash_t v4; + XXH32_hash_t mem32[4]; + XXH32_hash_t memsize; + XXH32_hash_t + reserved; /* never read nor write, might be removed in a future version */ + +}; /* typedef'd to XXH32_state_t */ + + #ifndef XXH_NO_LONG_LONG /* defined when there is no 64-bit support */ + +struct XXH64_state_s { + + XXH64_hash_t total_len; + XXH64_hash_t v1; + XXH64_hash_t v2; + XXH64_hash_t v3; + XXH64_hash_t v4; + XXH64_hash_t mem64[4]; + XXH32_hash_t memsize; + XXH32_hash_t reserved32; /* required for padding anyway */ + XXH64_hash_t reserved64; /* never read nor write, might be removed in a future + version */ + +}; /* typedef'd to XXH64_state_t */ + + #if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 201112L) /* C11+ */ + #include <stdalign.h> + #define XXH_ALIGN(n) alignas(n) + #elif defined(__GNUC__) + #define XXH_ALIGN(n) __attribute__((aligned(n))) + #elif defined(_MSC_VER) + #define XXH_ALIGN(n) __declspec(align(n)) + #else + #define XXH_ALIGN(n) /* disabled */ + #endif + + /* Old GCC versions only accept the attribute after the type in structures. + */ + #if !(defined(__STDC_VERSION__) && \ + (__STDC_VERSION__ >= 201112L)) /* C11+ */ \ + && defined(__GNUC__) + #define XXH_ALIGN_MEMBER(align, type) type XXH_ALIGN(align) + #else + #define XXH_ALIGN_MEMBER(align, type) XXH_ALIGN(align) type + #endif + + #define XXH3_INTERNALBUFFER_SIZE 256 + #define XXH3_SECRET_DEFAULT_SIZE 192 +struct XXH3_state_s { + + XXH_ALIGN_MEMBER(64, XXH64_hash_t acc[8]); + /* used to store a custom secret generated from a seed */ + XXH_ALIGN_MEMBER(64, unsigned char customSecret[XXH3_SECRET_DEFAULT_SIZE]); + XXH_ALIGN_MEMBER(64, unsigned char buffer[XXH3_INTERNALBUFFER_SIZE]); + XXH32_hash_t bufferedSize; + XXH32_hash_t reserved32; + size_t nbStripesSoFar; + XXH64_hash_t totalLen; + size_t nbStripesPerBlock; + size_t secretLimit; + XXH64_hash_t seed; + XXH64_hash_t reserved64; + const unsigned char *extSecret; /* reference to external secret; + * if == NULL, use .customSecret instead */ + /* note: there may be some padding at the end due to alignment on 64 bytes */ + +}; /* typedef'd to XXH3_state_t */ + + #undef XXH_ALIGN_MEMBER + + /* When the XXH3_state_t structure is merely emplaced on stack, + * it should be initialized with XXH3_INITSTATE() or a memset() + * in case its first reset uses XXH3_NNbits_reset_withSeed(). + * This init can be omitted if the first reset uses default or _withSecret + * mode. This operation isn't necessary when the state is created with + * XXH3_createState(). Note that this doesn't prepare the state for a + * streaming operation, it's still necessary to use XXH3_NNbits_reset*() + * afterwards. + */ + #define XXH3_INITSTATE(XXH3_state_ptr) \ + { (XXH3_state_ptr)->seed = 0; } + /* === Experimental API === */ /* Symbols defined below must be considered tied to a specific library version. */ @@ -752,17 +764,19 @@ XXH128_hashFromCanonical(const XXH128_canonical_t *src); /* * XXH3_generateSecret(): * - * Derive a secret for use with `*_withSecret()` prototypes of XXH3. - * Use this if you need a higher level of security than the one provided by - * 64bit seed. + * Derive a high-entropy secret from any user-defined content, named customSeed. + * The generated secret can be used in combination with `*_withSecret()` + * functions. The `_withSecret()` variants are useful to provide a higher level + * of protection than 64-bit seed, as it becomes much more difficult for an + * external actor to guess how to impact the calculation logic. * - * Take as input a custom seed of any length and any content, - * generate from it a high-entropy secret of length XXH3_SECRET_DEFAULT_SIZE - * into already allocated buffer secretBuffer. - * The generated secret ALWAYS is XXH_SECRET_DEFAULT_SIZE bytes long. + * The function accepts as input a custom seed of any length and any content, + * and derives from it a high-entropy secret of length XXH3_SECRET_DEFAULT_SIZE + * into an already allocated buffer secretBuffer. + * The generated secret is _always_ XXH_SECRET_DEFAULT_SIZE bytes long. * * The generated secret can then be used with any `*_withSecret()` variant. - * The functions `XXH3_128bits_withSecret()`, `XXH3_64bits_withSecret()`, + * Functions `XXH3_128bits_withSecret()`, `XXH3_64bits_withSecret()`, * `XXH3_128bits_reset_withSecret()` and `XXH3_64bits_reset_withSecret()` * are part of this list. They all accept a `secret` parameter * which must be very long for implementation reasons (>= XXH3_SECRET_SIZE_MIN) @@ -771,8 +785,8 @@ XXH128_hashFromCanonical(const XXH128_canonical_t *src); * this function can be used to generate a secret of proper quality. * * customSeed can be anything. It can have any size, even small ones, - * and its content can be anything, even some "low entropy" source such as a - * bunch of zeroes. The resulting `secret` will nonetheless respect all expected + * and its content can be anything, even stupidly "low entropy" source such as a + * bunch of zeroes. The resulting `secret` will nonetheless provide all expected * qualities. * * Supplying NULL as the customSeed copies the default secret into @@ -783,6 +797,10 @@ XXH_PUBLIC_API void XXH3_generateSecret(void * secretBuffer, const void *customSeed, size_t customSeedSize); +/* simple short-cut to pre-selected XXH3_128bits variant */ +XXH_PUBLIC_API XXH128_hash_t XXH128(const void *data, size_t len, + XXH64_hash_t seed); + #endif /* XXH_NO_LONG_LONG */ #if defined(XXH_INLINE_ALL) || defined(XXH_PRIVATE_API) @@ -799,17 +817,23 @@ XXH_PUBLIC_API void XXH3_generateSecret(void * secretBuffer, /*-********************************************************************** * xxHash implementation *-********************************************************************** - * xxHash's implementation used to be found in xxhash.c. + * xxHash's implementation used to be hosted inside xxhash.c. * - * However, code inlining requires the implementation to be visible to the - * compiler, usually within the header. + * However, inlining requires implementation to be visible to the compiler, + * hence be included alongside the header. + * Previously, implementation was hosted inside xxhash.c, + * which was then #included when inlining was activated. + * This construction created issues with a few build and install systems, + * as it required xxhash.c to be stored in /include directory. * - * As a workaround, xxhash.c used to be included within xxhash.h. This caused - * some issues with some build systems, especially ones which treat .c files - * as source files. + * xxHash implementation is now directly integrated within xxhash.h. + * As a consequence, xxhash.c is no longer needed in /include. * - * Therefore, the implementation is now directly integrated within xxhash.h. - * Another small advantage is that xxhash.c is no longer needed in /include. + * xxhash.c is still available and is still useful. + * In a "normal" setup, when xxhash is not inlined, + * xxhash.h only exposes the prototypes and public symbols, + * while xxhash.c can be built into an object file xxhash.o + * which can then be linked into the final binary. ************************************************************************/ #if (defined(XXH_INLINE_ALL) || defined(XXH_PRIVATE_API) || \ @@ -828,10 +852,10 @@ XXH_PUBLIC_API void XXH3_generateSecret(void * secretBuffer, * Unfortunately, on some target/compiler combinations, the generated assembly * is sub-optimal. * - * The below switch allow to select a different access method for improved - * performance. + * The below switch allow selection of a different access method + * in the search for improved performance. * Method 0 (default): - * Use `memcpy()`. Safe and portable. + * Use `memcpy()`. Safe and portable. Default. * Method 1: * `__attribute__((packed))` statement. It depends on compiler extensions * and is therefore not portable. @@ -843,7 +867,7 @@ XXH_PUBLIC_API void XXH3_generateSecret(void * secretBuffer, * It can generate buggy code on targets which do not support unaligned * memory accesses. * But in some circumstances, it's the only known way to get the most - * performance (ie GCC + ARMv6) + * performance (example: GCC + ARMv6) * Method 3: * Byteshift. This can generate the best code on old compilers which don't * inline small `memcpy()` calls, and it might also be faster on @@ -924,7 +948,8 @@ XXH_PUBLIC_API void XXH3_generateSecret(void * secretBuffer, * -fno-inline with GCC or Clang, this will automatically be defined. */ #ifndef XXH_NO_INLINE_HINTS - #if defined(__OPTIMIZE_SIZE__) || defined(__NO_INLINE__) + #if defined(__OPTIMIZE_SIZE__) /* -Os, -Oz */ \ + || defined(__NO_INLINE__) /* -O0, -fno-inline */ #define XXH_NO_INLINE_HINTS 1 #else #define XXH_NO_INLINE_HINTS 0 @@ -950,8 +975,8 @@ XXH_PUBLIC_API void XXH3_generateSecret(void * secretBuffer, * Includes & Memory related functions ***************************************/ /*! - * Modify the local functions below should you wish to use some other memory - * routines for malloc() and free() + * Modify the local functions below should you wish to use + * different memory routines for malloc() and free() */ #include <stdlib.h> @@ -1137,7 +1162,8 @@ typedef enum { XXH_bigEndian = 0, XXH_littleEndian = 1 } XXH_endianess; * Try to detect endianness automatically, to avoid the nonstandard behavior * in `XXH_isLittleEndian()` */ - #if defined(_WIN32) || defined(__LITTLE_ENDIAN__) || \ + #if defined(_WIN32) /* Windows is always little endian */ \ + || defined(__LITTLE_ENDIAN__) || \ (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__) #define XXH_CPU_LITTLE_ENDIAN 1 #elif defined(__BIG_ENDIAN__) || \ @@ -1778,13 +1804,16 @@ typedef XXH64_hash_t xxh_u64; * rerolled. */ #ifndef XXH_REROLL_XXH64 - #if (defined(__ILP32__) || defined(_ILP32)) || \ - !(defined(__x86_64__) || defined(_M_X64) || defined(_M_AMD64) || \ - defined(_M_ARM64) || defined(__aarch64__) || defined(__arm64__) || \ - defined(__PPC64__) || defined(__PPC64LE__) || \ - defined(__ppc64__) || defined(__powerpc64__) || \ - defined(__mips64__) || defined(__mips64)) || \ - (!defined(SIZE_MAX) || SIZE_MAX < ULLONG_MAX) + #if (defined(__ILP32__) || \ + defined(_ILP32)) /* ILP32 is often defined on 32-bit GCC family */ \ + || !(defined(__x86_64__) || defined(_M_X64) || \ + defined(_M_AMD64) /* x86-64 */ \ + || defined(_M_ARM64) || defined(__aarch64__) || \ + defined(__arm64__) /* aarch64 */ \ + || defined(__PPC64__) || defined(__PPC64LE__) || \ + defined(__ppc64__) || defined(__powerpc64__) /* ppc64 */ \ + || defined(__mips64__) || defined(__mips64)) /* mips64 */ \ + || (!defined(SIZE_MAX) || SIZE_MAX < ULLONG_MAX) /* check limits */ #define XXH_REROLL_XXH64 1 #else #define XXH_REROLL_XXH64 0 @@ -2428,7 +2457,3134 @@ XXH64_hashFromCanonical(const XXH64_canonical_t *src) { * New generation hash designed for speed on small keys and vectorization ************************************************************************ */ - #include "xxh3.h" + /* === Compiler specifics === */ + + #if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L /* >= C99 */ + #define XXH_RESTRICT restrict + #else + /* Note: it might be useful to define __restrict or __restrict__ for some + * C++ compilers */ + #define XXH_RESTRICT /* disable */ + #endif + + #if (defined(__GNUC__) && (__GNUC__ >= 3)) || \ + (defined(__INTEL_COMPILER) && (__INTEL_COMPILER >= 800)) || \ + defined(__clang__) + #define XXH_likely(x) __builtin_expect(x, 1) + #define XXH_unlikely(x) __builtin_expect(x, 0) + #else + #define XXH_likely(x) (x) + #define XXH_unlikely(x) (x) + #endif + + #if defined(__GNUC__) + #if defined(__AVX2__) + #include <immintrin.h> + #elif defined(__SSE2__) + #include <emmintrin.h> + #elif defined(__ARM_NEON__) || defined(__ARM_NEON) + #define inline __inline__ /* circumvent a clang bug */ + #include <arm_neon.h> + #undef inline + #endif + #elif defined(_MSC_VER) + #include <intrin.h> + #endif + + /* + * One goal of XXH3 is to make it fast on both 32-bit and 64-bit, while + * remaining a true 64-bit/128-bit hash function. + * + * This is done by prioritizing a subset of 64-bit operations that can be + * emulated without too many steps on the average 32-bit machine. + * + * For example, these two lines seem similar, and run equally fast on + * 64-bit: + * + * xxh_u64 x; + * x ^= (x >> 47); // good + * x ^= (x >> 13); // bad + * + * However, to a 32-bit machine, there is a major difference. + * + * x ^= (x >> 47) looks like this: + * + * x.lo ^= (x.hi >> (47 - 32)); + * + * while x ^= (x >> 13) looks like this: + * + * // note: funnel shifts are not usually cheap. + * x.lo ^= (x.lo >> 13) | (x.hi << (32 - 13)); + * x.hi ^= (x.hi >> 13); + * + * The first one is significantly faster than the second, simply because the + * shift is larger than 32. This means: + * - All the bits we need are in the upper 32 bits, so we can ignore the + * lower 32 bits in the shift. + * - The shift result will always fit in the lower 32 bits, and therefore, + * we can ignore the upper 32 bits in the xor. + * + * Thanks to this optimization, XXH3 only requires these features to be + * efficient: + * + * - Usable unaligned access + * - A 32-bit or 64-bit ALU + * - If 32-bit, a decent ADC instruction + * - A 32 or 64-bit multiply with a 64-bit result + * - For the 128-bit variant, a decent byteswap helps short inputs. + * + * The first two are already required by XXH32, and almost all 32-bit and + * 64-bit platforms which can run XXH32 can run XXH3 efficiently. + * + * Thumb-1, the classic 16-bit only subset of ARM's instruction set, is one + * notable exception. + * + * First of all, Thumb-1 lacks support for the UMULL instruction which + * performs the important long multiply. This means numerous __aeabi_lmul + * calls. + * + * Second of all, the 8 functional registers are just not enough. + * Setup for __aeabi_lmul, byteshift loads, pointers, and all arithmetic + * need Lo registers, and this shuffling results in thousands more MOVs than + * A32. + * + * A32 and T32 don't have this limitation. They can access all 14 registers, + * do a 32->64 multiply with UMULL, and the flexible operand allowing free + * shifts is helpful, too. + * + * Therefore, we do a quick sanity check. + * + * If compiling Thumb-1 for a target which supports ARM instructions, we + * will emit a warning, as it is not a "sane" platform to compile for. + * + * Usually, if this happens, it is because of an accident and you probably + * need to specify -march, as you likely meant to compile for a newer + * architecture. + * + * Credit: large sections of the vectorial and asm source code paths + * have been contributed by @easyaspi314 + */ + #if defined(__thumb__) && !defined(__thumb2__) && \ + defined(__ARM_ARCH_ISA_ARM) + #warning "XXH3 is highly inefficient without ARM or Thumb-2." + #endif + + /* ========================================== + * Vectorization detection + * ========================================== */ + #define XXH_SCALAR 0 /* Portable scalar version */ + #define XXH_SSE2 1 /* SSE2 for Pentium 4 and all x86_64 */ + #define XXH_AVX2 2 /* AVX2 for Haswell and Bulldozer */ + #define XXH_AVX512 3 /* AVX512 for Skylake and Icelake */ + #define XXH_NEON 4 /* NEON for most ARMv7-A and all AArch64 */ + #define XXH_VSX 5 /* VSX and ZVector for POWER8/z13 */ + + #ifndef XXH_VECTOR /* can be defined on command line */ + #if defined(__AVX512F__) + #define XXH_VECTOR XXH_AVX512 + #elif defined(__AVX2__) + #define XXH_VECTOR XXH_AVX2 + #elif defined(__SSE2__) || defined(_M_AMD64) || defined(_M_X64) || \ + (defined(_M_IX86_FP) && (_M_IX86_FP == 2)) + #define XXH_VECTOR XXH_SSE2 + #elif defined(__GNUC__) /* msvc support maybe later */ \ + && (defined(__ARM_NEON__) || defined(__ARM_NEON)) && \ + (defined(__LITTLE_ENDIAN__) /* We only support little endian NEON */ \ + || (defined(__BYTE_ORDER__) && \ + __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)) + #define XXH_VECTOR XXH_NEON + #elif (defined(__PPC64__) && defined(__POWER8_VECTOR__)) || \ + (defined(__s390x__) && defined(__VEC__)) && \ + defined(__GNUC__) /* TODO: IBM XL */ + #define XXH_VECTOR XXH_VSX + #else + #define XXH_VECTOR XXH_SCALAR + #endif + #endif + + /* + * Controls the alignment of the accumulator, + * for compatibility with aligned vector loads, which are usually faster. + */ + #ifndef XXH_ACC_ALIGN + #if defined(XXH_X86DISPATCH) + #define XXH_ACC_ALIGN 64 /* for compatibility with avx512 */ + #elif XXH_VECTOR == XXH_SCALAR /* scalar */ + #define XXH_ACC_ALIGN 8 + #elif XXH_VECTOR == XXH_SSE2 /* sse2 */ + #define XXH_ACC_ALIGN 16 + #elif XXH_VECTOR == XXH_AVX2 /* avx2 */ + #define XXH_ACC_ALIGN 32 + #elif XXH_VECTOR == XXH_NEON /* neon */ + #define XXH_ACC_ALIGN 16 + #elif XXH_VECTOR == XXH_VSX /* vsx */ + #define XXH_ACC_ALIGN 16 + #elif XXH_VECTOR == XXH_AVX512 /* avx512 */ + #define XXH_ACC_ALIGN 64 + #endif + #endif + + #if defined(XXH_X86DISPATCH) || XXH_VECTOR == XXH_SSE2 || \ + XXH_VECTOR == XXH_AVX2 || XXH_VECTOR == XXH_AVX512 + #define XXH_SEC_ALIGN XXH_ACC_ALIGN + #else + #define XXH_SEC_ALIGN 8 + #endif + + /* + * UGLY HACK: + * GCC usually generates the best code with -O3 for xxHash. + * + * However, when targeting AVX2, it is overzealous in its unrolling + * resulting in code roughly 3/4 the speed of Clang. + * + * There are other issues, such as GCC splitting _mm256_loadu_si256 into + * _mm_loadu_si128 + _mm256_inserti128_si256. This is an optimization which + * only applies to Sandy and Ivy Bridge... which don't even support AVX2. + * + * That is why when compiling the AVX2 version, it is recommended to use + * either -O2 -mavx2 -march=haswell or -O2 -mavx2 + * -mno-avx256-split-unaligned-load for decent performance, or to use Clang + * instead. + * + * Fortunately, we can control the first one with a pragma that forces GCC + * into -O2, but the other one we can't control without "failed to inline + * always inline function due to target mismatch" warnings. + */ + #if XXH_VECTOR == XXH_AVX2 /* AVX2 */ \ + && defined(__GNUC__) && !defined(__clang__) /* GCC, not Clang */ \ + && defined(__OPTIMIZE__) && \ + !defined(__OPTIMIZE_SIZE__) /* respect -O0 and -Os */ + #pragma GCC push_options + #pragma GCC optimize("-O2") + #endif + + #if XXH_VECTOR == XXH_NEON + /* + * NEON's setup for vmlal_u32 is a little more complicated than it is on + * SSE2, AVX2, and VSX. + * + * While PMULUDQ and VMULEUW both perform a mask, VMLAL.U32 performs an + * upcast. + * + * To do the same operation, the 128-bit 'Q' register needs to be split + * into two 64-bit 'D' registers, performing this operation:: + * + * [ a | b ] | + * '---------. .--------' | | x | + * | .---------' '--------. | + * [ a & 0xFFFFFFFF | b & 0xFFFFFFFF ],[ a >> 32 | b >> 32 ] + * + * Due to significant changes in aarch64, the fastest method for aarch64 + * is completely different than the fastest method for ARMv7-A. + * + * ARMv7-A treats D registers as unions overlaying Q registers, so + * modifying D11 will modify the high half of Q5. This is similar to how + * modifying AH will only affect bits 8-15 of AX on x86. + * + * VZIP takes two registers, and puts even lanes in one register and odd + * lanes in the other. + * + * On ARMv7-A, this strangely modifies both parameters in place instead of + * taking the usual 3-operand form. + * + * Therefore, if we want to do this, we can simply use a D-form VZIP.32 on + * the lower and upper halves of the Q register to end up with the high + * and low halves where we want - all in one instruction. + * + * vzip.32 d10, d11 @ d10 = { d10[0], d11[0] }; d11 = { d10[1], + * d11[1] } + * + * Unfortunately we need inline assembly for this: Instructions modifying + * two registers at once is not possible in GCC or Clang's IR, and they + * have to create a copy. + * + * aarch64 requires a different approach. + * + * In order to make it easier to write a decent compiler for aarch64, many + * quirks were removed, such as conditional execution. + * + * NEON was also affected by this. + * + * aarch64 cannot access the high bits of a Q-form register, and writes to + * a D-form register zero the high bits, similar to how writes to W-form + * scalar registers (or DWORD registers on x86_64) work. + * + * The formerly free vget_high intrinsics now require a vext (with a few + * exceptions) + * + * Additionally, VZIP was replaced by ZIP1 and ZIP2, which are the + * equivalent of PUNPCKL* and PUNPCKH* in SSE, respectively, in order to + * only modify one operand. + * + * The equivalent of the VZIP.32 on the lower and upper halves would be + * this mess: + * + * ext v2.4s, v0.4s, v0.4s, #2 // v2 = { v0[2], v0[3], v0[0], v0[1] + * } zip1 v1.2s, v0.2s, v2.2s // v1 = { v0[0], v2[0] } zip2 v0.2s, + * v0.2s, v1.2s // v0 = { v0[1], v2[1] } + * + * Instead, we use a literal downcast, vmovn_u64 (XTN), and vshrn_n_u64 + * (SHRN): + * + * shrn v1.2s, v0.2d, #32 // v1 = (uint32x2_t)(v0 >> 32); + * xtn v0.2s, v0.2d // v0 = (uint32x2_t)(v0 & 0xFFFFFFFF); + * + * This is available on ARMv7-A, but is less efficient than a single + * VZIP.32. + */ + + /* + * Function-like macro: + * void XXH_SPLIT_IN_PLACE(uint64x2_t &in, uint32x2_t &outLo, uint32x2_t + * &outHi) + * { + + * outLo = (uint32x2_t)(in & 0xFFFFFFFF); + * outHi = (uint32x2_t)(in >> 32); + * in = UNDEFINED; + * } + */ + #if !defined(XXH_NO_VZIP_HACK) /* define to disable */ \ + && defined(__GNUC__) && !defined(__aarch64__) && !defined(__arm64__) + #define XXH_SPLIT_IN_PLACE(in, outLo, outHi) \ + do { \ + \ + /* Undocumented GCC/Clang operand modifier: %e0 = lower D half, \ + * %f0 = upper D half */ \ + /* https://github.com/gcc-mirror/gcc/blob/38cf91e5/gcc/config/arm/arm.c#L22486 \ + */ \ + /* https://github.com/llvm-mirror/llvm/blob/2c4ca683/lib/Target/ARM/ARMAsmPrinter.cpp#L399 \ + */ \ + __asm__("vzip.32 %e0, %f0" : "+w"(in)); \ + (outLo) = vget_low_u32(vreinterpretq_u32_u64(in)); \ + (outHi) = vget_high_u32(vreinterpretq_u32_u64(in)); \ + \ + } while (0) + + #else + #define XXH_SPLIT_IN_PLACE(in, outLo, outHi) \ + do { \ + \ + (outLo) = vmovn_u64(in); \ + (outHi) = vshrn_n_u64((in), 32); \ + \ + } while (0) + + #endif + #endif /* XXH_VECTOR == XXH_NEON */ + + /* + * VSX and Z Vector helpers. + * + * This is very messy, and any pull requests to clean this up are welcome. + * + * There are a lot of problems with supporting VSX and s390x, due to + * inconsistent intrinsics, spotty coverage, and multiple endiannesses. + */ + #if XXH_VECTOR == XXH_VSX + #if defined(__s390x__) + #include <s390intrin.h> + #else + /* gcc's altivec.h can have the unwanted consequence to unconditionally + * #define bool, vector, and pixel keywords, + * with bad consequences for programs already using these keywords for + * other purposes. The paragraph defining these macros is skipped when + * __APPLE_ALTIVEC__ is defined. + * __APPLE_ALTIVEC__ is _generally_ defined automatically by the + * compiler, but it seems that, in some cases, it isn't. Force the build + * macro to be defined, so that keywords are not altered. + */ + #if defined(__GNUC__) && !defined(__APPLE_ALTIVEC__) + #define __APPLE_ALTIVEC__ + #endif + #include <altivec.h> + #endif + +typedef __vector unsigned long long xxh_u64x2; +typedef __vector unsigned char xxh_u8x16; +typedef __vector unsigned xxh_u32x4; + + #ifndef XXH_VSX_BE + #if defined(__BIG_ENDIAN__) || \ + (defined(__BYTE_ORDER__) && \ + __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__) + #define XXH_VSX_BE 1 + #elif defined(__VEC_ELEMENT_REG_ORDER__) && \ + __VEC_ELEMENT_REG_ORDER__ == __ORDER_BIG_ENDIAN__ + #warning \ + "-maltivec=be is not recommended. Please use native endianness." + #define XXH_VSX_BE 1 + #else + #define XXH_VSX_BE 0 + #endif + #endif /* !defined(XXH_VSX_BE) */ + + #if XXH_VSX_BE + /* A wrapper for POWER9's vec_revb. */ + #if defined(__POWER9_VECTOR__) || \ + (defined(__clang__) && defined(__s390x__)) + #define XXH_vec_revb vec_revb + #else +XXH_FORCE_INLINE xxh_u64x2 XXH_vec_revb(xxh_u64x2 val) { + + xxh_u8x16 const vByteSwap = {0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, + 0x0F, 0x0E, 0x0D, 0x0C, 0x0B, 0x0A, 0x09, 0x08}; + return vec_perm(val, val, vByteSwap); + +} + + #endif + #endif /* XXH_VSX_BE */ + +/* + * Performs an unaligned load and byte swaps it on big endian. + */ +XXH_FORCE_INLINE xxh_u64x2 XXH_vec_loadu(const void *ptr) { + + xxh_u64x2 ret; + memcpy(&ret, ptr, sizeof(xxh_u64x2)); + #if XXH_VSX_BE + ret = XXH_vec_revb(ret); + #endif + return ret; + +} + + /* + * vec_mulo and vec_mule are very problematic intrinsics on PowerPC + * + * These intrinsics weren't added until GCC 8, despite existing for a + * while, and they are endian dependent. Also, their meaning swap + * depending on version. + * */ + #if defined(__s390x__) + /* s390x is always big endian, no issue on this platform */ + #define XXH_vec_mulo vec_mulo + #define XXH_vec_mule vec_mule + #elif defined(__clang__) && XXH_HAS_BUILTIN(__builtin_altivec_vmuleuw) + /* Clang has a better way to control this, we can just use the builtin + * which doesn't swap. */ + #define XXH_vec_mulo __builtin_altivec_vmulouw + #define XXH_vec_mule __builtin_altivec_vmuleuw + #else +/* gcc needs inline assembly */ +/* Adapted from + * https://github.com/google/highwayhash/blob/master/highwayhash/hh_vsx.h. */ +XXH_FORCE_INLINE xxh_u64x2 XXH_vec_mulo(xxh_u32x4 a, xxh_u32x4 b) { + + xxh_u64x2 result; + __asm__("vmulouw %0, %1, %2" : "=v"(result) : "v"(a), "v"(b)); + return result; + +} + +XXH_FORCE_INLINE xxh_u64x2 XXH_vec_mule(xxh_u32x4 a, xxh_u32x4 b) { + + xxh_u64x2 result; + __asm__("vmuleuw %0, %1, %2" : "=v"(result) : "v"(a), "v"(b)); + return result; + +} + + #endif /* XXH_vec_mulo, XXH_vec_mule */ + #endif /* XXH_VECTOR == XXH_VSX */ + + /* prefetch + * can be disabled, by declaring XXH_NO_PREFETCH build macro */ + #if defined(XXH_NO_PREFETCH) + #define XXH_PREFETCH(ptr) (void)(ptr) /* disabled */ + #else + #if defined(_MSC_VER) && \ + (defined(_M_X64) || \ + defined( \ + _M_I86)) /* _mm_prefetch() is not defined outside of x86/x64 */ + #include <mmintrin.h> /* https://msdn.microsoft.com/fr-fr/library/84szxsww(v=vs.90).aspx */ + #define XXH_PREFETCH(ptr) _mm_prefetch((const char *)(ptr), _MM_HINT_T0) + #elif defined(__GNUC__) && \ + ((__GNUC__ >= 4) || ((__GNUC__ == 3) && (__GNUC_MINOR__ >= 1))) + #define XXH_PREFETCH(ptr) \ + __builtin_prefetch((ptr), 0 /* rw==read */, 3 /* locality */) + #else + #define XXH_PREFETCH(ptr) (void)(ptr) /* disabled */ + #endif + #endif /* XXH_NO_PREFETCH */ + + /* ========================================== + * XXH3 default settings + * ========================================== */ + + #define XXH_SECRET_DEFAULT_SIZE 192 /* minimum XXH3_SECRET_SIZE_MIN */ + + #if (XXH_SECRET_DEFAULT_SIZE < XXH3_SECRET_SIZE_MIN) + #error "default keyset is not large enough" + #endif + +/* Pseudorandom secret taken directly from FARSH */ +XXH_ALIGN(64) +static const xxh_u8 XXH3_kSecret[XXH_SECRET_DEFAULT_SIZE] = { + + 0xb8, 0xfe, 0x6c, 0x39, 0x23, 0xa4, 0x4b, 0xbe, 0x7c, 0x01, 0x81, 0x2c, + 0xf7, 0x21, 0xad, 0x1c, 0xde, 0xd4, 0x6d, 0xe9, 0x83, 0x90, 0x97, 0xdb, + 0x72, 0x40, 0xa4, 0xa4, 0xb7, 0xb3, 0x67, 0x1f, 0xcb, 0x79, 0xe6, 0x4e, + 0xcc, 0xc0, 0xe5, 0x78, 0x82, 0x5a, 0xd0, 0x7d, 0xcc, 0xff, 0x72, 0x21, + 0xb8, 0x08, 0x46, 0x74, 0xf7, 0x43, 0x24, 0x8e, 0xe0, 0x35, 0x90, 0xe6, + 0x81, 0x3a, 0x26, 0x4c, 0x3c, 0x28, 0x52, 0xbb, 0x91, 0xc3, 0x00, 0xcb, + 0x88, 0xd0, 0x65, 0x8b, 0x1b, 0x53, 0x2e, 0xa3, 0x71, 0x64, 0x48, 0x97, + 0xa2, 0x0d, 0xf9, 0x4e, 0x38, 0x19, 0xef, 0x46, 0xa9, 0xde, 0xac, 0xd8, + 0xa8, 0xfa, 0x76, 0x3f, 0xe3, 0x9c, 0x34, 0x3f, 0xf9, 0xdc, 0xbb, 0xc7, + 0xc7, 0x0b, 0x4f, 0x1d, 0x8a, 0x51, 0xe0, 0x4b, 0xcd, 0xb4, 0x59, 0x31, + 0xc8, 0x9f, 0x7e, 0xc9, 0xd9, 0x78, 0x73, 0x64, 0xea, 0xc5, 0xac, 0x83, + 0x34, 0xd3, 0xeb, 0xc3, 0xc5, 0x81, 0xa0, 0xff, 0xfa, 0x13, 0x63, 0xeb, + 0x17, 0x0d, 0xdd, 0x51, 0xb7, 0xf0, 0xda, 0x49, 0xd3, 0x16, 0x55, 0x26, + 0x29, 0xd4, 0x68, 0x9e, 0x2b, 0x16, 0xbe, 0x58, 0x7d, 0x47, 0xa1, 0xfc, + 0x8f, 0xf8, 0xb8, 0xd1, 0x7a, 0xd0, 0x31, 0xce, 0x45, 0xcb, 0x3a, 0x8f, + 0x95, 0x16, 0x04, 0x28, 0xaf, 0xd7, 0xfb, 0xca, 0xbb, 0x4b, 0x40, 0x7e, + +}; + + #ifdef XXH_OLD_NAMES + #define kSecret XXH3_kSecret + #endif + + /* + * Calculates a 32-bit to 64-bit long multiply. + * + * Wraps __emulu on MSVC x86 because it tends to call __allmul when it + * doesn't need to (but it shouldn't need to anyways, it is about 7 + * instructions to do a 64x64 multiply...). Since we know that this will + * _always_ emit MULL, we use that instead of the normal method. + * + * If you are compiling for platforms like Thumb-1 and don't have a better + * option, you may also want to write your own long multiply routine here. + * + * XXH_FORCE_INLINE xxh_u64 XXH_mult32to64(xxh_u64 x, xxh_u64 y) + * { + + * return (x & 0xFFFFFFFF) * (y & 0xFFFFFFFF); + * } + */ + #if defined(_MSC_VER) && defined(_M_IX86) + #include <intrin.h> + #define XXH_mult32to64(x, y) __emulu((unsigned)(x), (unsigned)(y)) + #else + /* + * Downcast + upcast is usually better than masking on older compilers + * like GCC 4.2 (especially 32-bit ones), all without affecting newer + * compilers. + * + * The other method, (x & 0xFFFFFFFF) * (y & 0xFFFFFFFF), will AND both + * operands and perform a full 64x64 multiply -- entirely redundant on + * 32-bit. + */ + #define XXH_mult32to64(x, y) \ + ((xxh_u64)(xxh_u32)(x) * (xxh_u64)(xxh_u32)(y)) + #endif + +/* + * Calculates a 64->128-bit long multiply. + * + * Uses __uint128_t and _umul128 if available, otherwise uses a scalar version. + */ +static XXH128_hash_t XXH_mult64to128(xxh_u64 lhs, xxh_u64 rhs) { + + /* + * GCC/Clang __uint128_t method. + * + * On most 64-bit targets, GCC and Clang define a __uint128_t type. + * This is usually the best way as it usually uses a native long 64-bit + * multiply, such as MULQ on x86_64 or MUL + UMULH on aarch64. + * + * Usually. + * + * Despite being a 32-bit platform, Clang (and emscripten) define this type + * despite not having the arithmetic for it. This results in a laggy + * compiler builtin call which calculates a full 128-bit multiply. + * In that case it is best to use the portable one. + * https://github.com/Cyan4973/xxHash/issues/211#issuecomment-515575677 + */ + #if defined(__GNUC__) && !defined(__wasm__) && \ + defined(__SIZEOF_INT128__) || \ + (defined(_INTEGRAL_MAX_BITS) && _INTEGRAL_MAX_BITS >= 128) + + __uint128_t const product = (__uint128_t)lhs * (__uint128_t)rhs; + XXH128_hash_t r128; + r128.low64 = (xxh_u64)(product); + r128.high64 = (xxh_u64)(product >> 64); + return r128; + + /* + * MSVC for x64's _umul128 method. + * + * xxh_u64 _umul128(xxh_u64 Multiplier, xxh_u64 Multiplicand, xxh_u64 + * *HighProduct); + * + * This compiles to single operand MUL on x64. + */ + #elif defined(_M_X64) || defined(_M_IA64) + + #ifndef _MSC_VER + #pragma intrinsic(_umul128) + #endif + xxh_u64 product_high; + xxh_u64 const product_low = _umul128(lhs, rhs, &product_high); + XXH128_hash_t r128; + r128.low64 = product_low; + r128.high64 = product_high; + return r128; + + #else + /* + * Portable scalar method. Optimized for 32-bit and 64-bit ALUs. + * + * This is a fast and simple grade school multiply, which is shown below + * with base 10 arithmetic instead of base 0x100000000. + * + * 9 3 // D2 lhs = 93 + * x 7 5 // D2 rhs = 75 + * ---------- + * 1 5 // D2 lo_lo = (93 % 10) * (75 % 10) = 15 + * 4 5 | // D2 hi_lo = (93 / 10) * (75 % 10) = 45 + * 2 1 | // D2 lo_hi = (93 % 10) * (75 / 10) = 21 + * + 6 3 | | // D2 hi_hi = (93 / 10) * (75 / 10) = 63 + * --------- + * 2 7 | // D2 cross = (15 / 10) + (45 % 10) + 21 = 27 + * + 6 7 | | // D2 upper = (27 / 10) + (45 / 10) + 63 = 67 + * --------- + * 6 9 7 5 // D4 res = (27 * 10) + (15 % 10) + (67 * 100) = 6975 + * + * The reasons for adding the products like this are: + * 1. It avoids manual carry tracking. Just like how + * (9 * 9) + 9 + 9 = 99, the same applies with this for UINT64_MAX. + * This avoids a lot of complexity. + * + * 2. It hints for, and on Clang, compiles to, the powerful UMAAL + * instruction available in ARM's Digital Signal Processing extension + * in 32-bit ARMv6 and later, which is shown below: + * + * void UMAAL(xxh_u32 *RdLo, xxh_u32 *RdHi, xxh_u32 Rn, xxh_u32 Rm) + * { + + * xxh_u64 product = (xxh_u64)*RdLo * (xxh_u64)*RdHi + Rn + Rm; + * *RdLo = (xxh_u32)(product & 0xFFFFFFFF); + * *RdHi = (xxh_u32)(product >> 32); + * } + * + * This instruction was designed for efficient long multiplication, and + * allows this to be calculated in only 4 instructions at speeds + * comparable to some 64-bit ALUs. + * + * 3. It isn't terrible on other platforms. Usually this will be a couple + * of 32-bit ADD/ADCs. + */ + + /* First calculate all of the cross products. */ + xxh_u64 const lo_lo = XXH_mult32to64(lhs & 0xFFFFFFFF, rhs & 0xFFFFFFFF); + xxh_u64 const hi_lo = XXH_mult32to64(lhs >> 32, rhs & 0xFFFFFFFF); + xxh_u64 const lo_hi = XXH_mult32to64(lhs & 0xFFFFFFFF, rhs >> 32); + xxh_u64 const hi_hi = XXH_mult32to64(lhs >> 32, rhs >> 32); + + /* Now add the products together. These will never overflow. */ + xxh_u64 const cross = (lo_lo >> 32) + (hi_lo & 0xFFFFFFFF) + lo_hi; + xxh_u64 const upper = (hi_lo >> 32) + (cross >> 32) + hi_hi; + xxh_u64 const lower = (cross << 32) | (lo_lo & 0xFFFFFFFF); + + XXH128_hash_t r128; + r128.low64 = lower; + r128.high64 = upper; + return r128; + #endif + +} + +/* + * Does a 64-bit to 128-bit multiply, then XOR folds it. + * + * The reason for the separate function is to prevent passing too many structs + * around by value. This will hopefully inline the multiply, but we don't force + * it. + */ +static xxh_u64 XXH3_mul128_fold64(xxh_u64 lhs, xxh_u64 rhs) { + + XXH128_hash_t product = XXH_mult64to128(lhs, rhs); + return product.low64 ^ product.high64; + +} + +/* Seems to produce slightly better code on GCC for some reason. */ +XXH_FORCE_INLINE xxh_u64 XXH_xorshift64(xxh_u64 v64, int shift) { + + XXH_ASSERT(0 <= shift && shift < 64); + return v64 ^ (v64 >> shift); + +} + +/* + * This is a fast avalanche stage, + * suitable when input bits are already partially mixed + */ +static XXH64_hash_t XXH3_avalanche(xxh_u64 h64) { + + h64 = XXH_xorshift64(h64, 37); + h64 *= 0x165667919E3779F9ULL; + h64 = XXH_xorshift64(h64, 32); + return h64; + +} + +/* + * This is a stronger avalanche, + * inspired by Pelle Evensen's rrmxmx + * preferable when input has not been previously mixed + */ +static XXH64_hash_t XXH3_rrmxmx(xxh_u64 h64, xxh_u64 len) { + + /* this mix is inspired by Pelle Evensen's rrmxmx */ + h64 ^= XXH_rotl64(h64, 49) ^ XXH_rotl64(h64, 24); + h64 *= 0x9FB21C651E98DF25ULL; + h64 ^= (h64 >> 35) + len; + h64 *= 0x9FB21C651E98DF25ULL; + return XXH_xorshift64(h64, 28); + +} + +/* ========================================== + * Short keys + * ========================================== + * One of the shortcomings of XXH32 and XXH64 was that their performance was + * sub-optimal on short lengths. It used an iterative algorithm which strongly + * favored lengths that were a multiple of 4 or 8. + * + * Instead of iterating over individual inputs, we use a set of single shot + * functions which piece together a range of lengths and operate in constant + * time. + * + * Additionally, the number of multiplies has been significantly reduced. This + * reduces latency, especially when emulating 64-bit multiplies on 32-bit. + * + * Depending on the platform, this may or may not be faster than XXH32, but it + * is almost guaranteed to be faster than XXH64. + */ + +/* + * At very short lengths, there isn't enough input to fully hide secrets, or use + * the entire secret. + * + * There is also only a limited amount of mixing we can do before significantly + * impacting performance. + * + * Therefore, we use different sections of the secret and always mix two secret + * samples with an XOR. This should have no effect on performance on the + * seedless or withSeed variants because everything _should_ be constant folded + * by modern compilers. + * + * The XOR mixing hides individual parts of the secret and increases entropy. + * + * This adds an extra layer of strength for custom secrets. + */ +XXH_FORCE_INLINE XXH64_hash_t XXH3_len_1to3_64b(const xxh_u8 *input, size_t len, + const xxh_u8 *secret, + XXH64_hash_t seed) { + + XXH_ASSERT(input != NULL); + XXH_ASSERT(1 <= len && len <= 3); + XXH_ASSERT(secret != NULL); + /* + * len = 1: combined = { input[0], 0x01, input[0], input[0] } + * len = 2: combined = { input[1], 0x02, input[0], input[1] } + * len = 3: combined = { input[2], 0x03, input[0], input[1] } + */ + { + + xxh_u8 const c1 = input[0]; + xxh_u8 const c2 = input[len >> 1]; + xxh_u8 const c3 = input[len - 1]; + xxh_u32 const combined = ((xxh_u32)c1 << 16) | ((xxh_u32)c2 << 24) | + ((xxh_u32)c3 << 0) | ((xxh_u32)len << 8); + xxh_u64 const bitflip = + (XXH_readLE32(secret) ^ XXH_readLE32(secret + 4)) + seed; + xxh_u64 const keyed = (xxh_u64)combined ^ bitflip; + return XXH64_avalanche(keyed); + + } + +} + +XXH_FORCE_INLINE XXH64_hash_t XXH3_len_4to8_64b(const xxh_u8 *input, size_t len, + const xxh_u8 *secret, + XXH64_hash_t seed) { + + XXH_ASSERT(input != NULL); + XXH_ASSERT(secret != NULL); + XXH_ASSERT(4 <= len && len < 8); + seed ^= (xxh_u64)XXH_swap32((xxh_u32)seed) << 32; + { + + xxh_u32 const input1 = XXH_readLE32(input); + xxh_u32 const input2 = XXH_readLE32(input + len - 4); + xxh_u64 const bitflip = + (XXH_readLE64(secret + 8) ^ XXH_readLE64(secret + 16)) - seed; + xxh_u64 const input64 = input2 + (((xxh_u64)input1) << 32); + xxh_u64 const keyed = input64 ^ bitflip; + return XXH3_rrmxmx(keyed, len); + + } + +} + +XXH_FORCE_INLINE XXH64_hash_t XXH3_len_9to16_64b(const xxh_u8 *input, + size_t len, + const xxh_u8 *secret, + XXH64_hash_t seed) { + + XXH_ASSERT(input != NULL); + XXH_ASSERT(secret != NULL); + XXH_ASSERT(8 <= len && len <= 16); + { + + xxh_u64 const bitflip1 = + (XXH_readLE64(secret + 24) ^ XXH_readLE64(secret + 32)) + seed; + xxh_u64 const bitflip2 = + (XXH_readLE64(secret + 40) ^ XXH_readLE64(secret + 48)) - seed; + xxh_u64 const input_lo = XXH_readLE64(input) ^ bitflip1; + xxh_u64 const input_hi = XXH_readLE64(input + len - 8) ^ bitflip2; + xxh_u64 const acc = len + XXH_swap64(input_lo) + input_hi + + XXH3_mul128_fold64(input_lo, input_hi); + return XXH3_avalanche(acc); + + } + +} + +XXH_FORCE_INLINE XXH64_hash_t XXH3_len_0to16_64b(const xxh_u8 *input, + size_t len, + const xxh_u8 *secret, + XXH64_hash_t seed) { + + XXH_ASSERT(len <= 16); + { + + if (XXH_likely(len > 8)) + return XXH3_len_9to16_64b(input, len, secret, seed); + if (XXH_likely(len >= 4)) + return XXH3_len_4to8_64b(input, len, secret, seed); + if (len) return XXH3_len_1to3_64b(input, len, secret, seed); + return XXH64_avalanche( + seed ^ (XXH_readLE64(secret + 56) ^ XXH_readLE64(secret + 64))); + + } + +} + +/* + * DISCLAIMER: There are known *seed-dependent* multicollisions here due to + * multiplication by zero, affecting hashes of lengths 17 to 240. + * + * However, they are very unlikely. + * + * Keep this in mind when using the unseeded XXH3_64bits() variant: As with all + * unseeded non-cryptographic hashes, it does not attempt to defend itself + * against specially crafted inputs, only random inputs. + * + * Compared to classic UMAC where a 1 in 2^31 chance of 4 consecutive bytes + * cancelling out the secret is taken an arbitrary number of times (addressed + * in XXH3_accumulate_512), this collision is very unlikely with random inputs + * and/or proper seeding: + * + * This only has a 1 in 2^63 chance of 8 consecutive bytes cancelling out, in a + * function that is only called up to 16 times per hash with up to 240 bytes of + * input. + * + * This is not too bad for a non-cryptographic hash function, especially with + * only 64 bit outputs. + * + * The 128-bit variant (which trades some speed for strength) is NOT affected + * by this, although it is always a good idea to use a proper seed if you care + * about strength. + */ +XXH_FORCE_INLINE xxh_u64 XXH3_mix16B(const xxh_u8 *XXH_RESTRICT input, + const xxh_u8 *XXH_RESTRICT secret, + xxh_u64 seed64) { + + #if defined(__GNUC__) && !defined(__clang__) /* GCC, not Clang */ \ + && defined(__i386__) && defined(__SSE2__) /* x86 + SSE2 */ \ + && \ + !defined( \ + XXH_ENABLE_AUTOVECTORIZE) /* Define to disable like XXH32 hack */ + /* + * UGLY HACK: + * GCC for x86 tends to autovectorize the 128-bit multiply, resulting in + * slower code. + * + * By forcing seed64 into a register, we disrupt the cost model and + * cause it to scalarize. See `XXH32_round()` + * + * FIXME: Clang's output is still _much_ faster -- On an AMD Ryzen 3600, + * XXH3_64bits @ len=240 runs at 4.6 GB/s with Clang 9, but 3.3 GB/s on + * GCC 9.2, despite both emitting scalar code. + * + * GCC generates much better scalar code than Clang for the rest of XXH3, + * which is why finding a more optimal codepath is an interest. + */ + __asm__("" : "+r"(seed64)); + #endif + { + + xxh_u64 const input_lo = XXH_readLE64(input); + xxh_u64 const input_hi = XXH_readLE64(input + 8); + return XXH3_mul128_fold64(input_lo ^ (XXH_readLE64(secret) + seed64), + input_hi ^ (XXH_readLE64(secret + 8) - seed64)); + + } + +} + +/* For mid range keys, XXH3 uses a Mum-hash variant. */ +XXH_FORCE_INLINE XXH64_hash_t XXH3_len_17to128_64b( + const xxh_u8 *XXH_RESTRICT input, size_t len, + const xxh_u8 *XXH_RESTRICT secret, size_t secretSize, XXH64_hash_t seed) { + + XXH_ASSERT(secretSize >= XXH3_SECRET_SIZE_MIN); + (void)secretSize; + XXH_ASSERT(16 < len && len <= 128); + + { + + xxh_u64 acc = len * XXH_PRIME64_1; + if (len > 32) { + + if (len > 64) { + + if (len > 96) { + + acc += XXH3_mix16B(input + 48, secret + 96, seed); + acc += XXH3_mix16B(input + len - 64, secret + 112, seed); + + } + + acc += XXH3_mix16B(input + 32, secret + 64, seed); + acc += XXH3_mix16B(input + len - 48, secret + 80, seed); + + } + + acc += XXH3_mix16B(input + 16, secret + 32, seed); + acc += XXH3_mix16B(input + len - 32, secret + 48, seed); + + } + + acc += XXH3_mix16B(input + 0, secret + 0, seed); + acc += XXH3_mix16B(input + len - 16, secret + 16, seed); + + return XXH3_avalanche(acc); + + } + +} + + #define XXH3_MIDSIZE_MAX 240 + +XXH_NO_INLINE XXH64_hash_t XXH3_len_129to240_64b( + const xxh_u8 *XXH_RESTRICT input, size_t len, + const xxh_u8 *XXH_RESTRICT secret, size_t secretSize, XXH64_hash_t seed) { + + XXH_ASSERT(secretSize >= XXH3_SECRET_SIZE_MIN); + (void)secretSize; + XXH_ASSERT(128 < len && len <= XXH3_MIDSIZE_MAX); + + #define XXH3_MIDSIZE_STARTOFFSET 3 + #define XXH3_MIDSIZE_LASTOFFSET 17 + + { + + xxh_u64 acc = len * XXH_PRIME64_1; + int const nbRounds = (int)len / 16; + int i; + for (i = 0; i < 8; i++) { + + acc += XXH3_mix16B(input + (16 * i), secret + (16 * i), seed); + + } + + acc = XXH3_avalanche(acc); + XXH_ASSERT(nbRounds >= 8); + #if defined(__clang__) /* Clang */ \ + && (defined(__ARM_NEON) || defined(__ARM_NEON__)) /* NEON */ \ + && !defined(XXH_ENABLE_AUTOVECTORIZE) /* Define to disable */ + /* + * UGLY HACK: + * Clang for ARMv7-A tries to vectorize this loop, similar to GCC x86. + * In everywhere else, it uses scalar code. + * + * For 64->128-bit multiplies, even if the NEON was 100% optimal, it + * would still be slower than UMAAL (see XXH_mult64to128). + * + * Unfortunately, Clang doesn't handle the long multiplies properly and + * converts them to the nonexistent "vmulq_u64" intrinsic, which is then + * scalarized into an ugly mess of VMOV.32 instructions. + * + * This mess is difficult to avoid without turning autovectorization + * off completely, but they are usually relatively minor and/or not + * worth it to fix. + * + * This loop is the easiest to fix, as unlike XXH32, this pragma + * _actually works_ because it is a loop vectorization instead of an + * SLP vectorization. + */ + #pragma clang loop vectorize(disable) + #endif + for (i = 8; i < nbRounds; i++) { + + acc += + XXH3_mix16B(input + (16 * i), + secret + (16 * (i - 8)) + XXH3_MIDSIZE_STARTOFFSET, seed); + + } + + /* last bytes */ + acc += XXH3_mix16B(input + len - 16, + secret + XXH3_SECRET_SIZE_MIN - XXH3_MIDSIZE_LASTOFFSET, + seed); + return XXH3_avalanche(acc); + + } + +} + + /* ======= Long Keys ======= */ + + #define XXH_STRIPE_LEN 64 + #define XXH_SECRET_CONSUME_RATE \ + 8 /* nb of secret bytes consumed at each accumulation */ + #define XXH_ACC_NB (XXH_STRIPE_LEN / sizeof(xxh_u64)) + + #ifdef XXH_OLD_NAMES + #define STRIPE_LEN XXH_STRIPE_LEN + #define ACC_NB XXH_ACC_NB + #endif + +XXH_FORCE_INLINE void XXH_writeLE64(void *dst, xxh_u64 v64) { + + if (!XXH_CPU_LITTLE_ENDIAN) v64 = XXH_swap64(v64); + memcpy(dst, &v64, sizeof(v64)); + +} + + /* Several intrinsic functions below are supposed to accept __int64 as + * argument, as documented in + * https://software.intel.com/sites/landingpage/IntrinsicsGuide/ . However, + * several environments do not define __int64 type, requiring a workaround. + */ + #if !defined(__VMS) && \ + (defined(__cplusplus) || (defined(__STDC_VERSION__) && \ + (__STDC_VERSION__ >= 199901L) /* C99 */)) +typedef int64_t xxh_i64; + #else +/* the following type must have a width of 64-bit */ +typedef long long xxh_i64; + #endif + + /* + * XXH3_accumulate_512 is the tightest loop for long inputs, and it is the + * most optimized. + * + * It is a hardened version of UMAC, based off of FARSH's implementation. + * + * This was chosen because it adapts quite well to 32-bit, 64-bit, and SIMD + * implementations, and it is ridiculously fast. + * + * We harden it by mixing the original input to the accumulators as well as + * the product. + * + * This means that in the (relatively likely) case of a multiply by zero, the + * original input is preserved. + * + * On 128-bit inputs, we swap 64-bit pairs when we add the input to improve + * cross-pollination, as otherwise the upper and lower halves would be + * essentially independent. + * + * This doesn't matter on 64-bit hashes since they all get merged together in + * the end, so we skip the extra step. + * + * Both XXH3_64bits and XXH3_128bits use this subroutine. + */ + + #if (XXH_VECTOR == XXH_AVX512) || defined(XXH_X86DISPATCH) + + #ifndef XXH_TARGET_AVX512 + #define XXH_TARGET_AVX512 /* disable attribute target */ + #endif + +XXH_FORCE_INLINE XXH_TARGET_AVX512 void XXH3_accumulate_512_avx512( + void *XXH_RESTRICT acc, const void *XXH_RESTRICT input, + const void *XXH_RESTRICT secret) { + + XXH_ALIGN(64) __m512i *const xacc = (__m512i *)acc; + XXH_ASSERT((((size_t)acc) & 63) == 0); + XXH_STATIC_ASSERT(XXH_STRIPE_LEN == sizeof(__m512i)); + + { + + /* data_vec = input[0]; */ + __m512i const data_vec = _mm512_loadu_si512(input); + /* key_vec = secret[0]; */ + __m512i const key_vec = _mm512_loadu_si512(secret); + /* data_key = data_vec ^ key_vec; */ + __m512i const data_key = _mm512_xor_si512(data_vec, key_vec); + /* data_key_lo = data_key >> 32; */ + __m512i const data_key_lo = + _mm512_shuffle_epi32(data_key, (_MM_PERM_ENUM)_MM_SHUFFLE(0, 3, 0, 1)); + /* product = (data_key & 0xffffffff) * (data_key_lo & 0xffffffff); */ + __m512i const product = _mm512_mul_epu32(data_key, data_key_lo); + /* xacc[0] += swap(data_vec); */ + __m512i const data_swap = + _mm512_shuffle_epi32(data_vec, (_MM_PERM_ENUM)_MM_SHUFFLE(1, 0, 3, 2)); + __m512i const sum = _mm512_add_epi64(*xacc, data_swap); + /* xacc[0] += product; */ + *xacc = _mm512_add_epi64(product, sum); + + } + +} + +/* + * XXH3_scrambleAcc: Scrambles the accumulators to improve mixing. + * + * Multiplication isn't perfect, as explained by Google in HighwayHash: + * + * // Multiplication mixes/scrambles bytes 0-7 of the 64-bit result to + * // varying degrees. In descending order of goodness, bytes + * // 3 4 2 5 1 6 0 7 have quality 228 224 164 160 100 96 36 32. + * // As expected, the upper and lower bytes are much worse. + * + * Source: + * https://github.com/google/highwayhash/blob/0aaf66b/highwayhash/hh_avx2.h#L291 + * + * Since our algorithm uses a pseudorandom secret to add some variance into the + * mix, we don't need to (or want to) mix as often or as much as HighwayHash + * does. + * + * This isn't as tight as XXH3_accumulate, but still written in SIMD to avoid + * extraction. + * + * Both XXH3_64bits and XXH3_128bits use this subroutine. + */ + +XXH_FORCE_INLINE XXH_TARGET_AVX512 void XXH3_scrambleAcc_avx512( + void *XXH_RESTRICT acc, const void *XXH_RESTRICT secret) { + + XXH_ASSERT((((size_t)acc) & 63) == 0); + XXH_STATIC_ASSERT(XXH_STRIPE_LEN == sizeof(__m512i)); + { + + XXH_ALIGN(64) __m512i *const xacc = (__m512i *)acc; + const __m512i prime32 = _mm512_set1_epi32((int)XXH_PRIME32_1); + + /* xacc[0] ^= (xacc[0] >> 47) */ + __m512i const acc_vec = *xacc; + __m512i const shifted = _mm512_srli_epi64(acc_vec, 47); + __m512i const data_vec = _mm512_xor_si512(acc_vec, shifted); + /* xacc[0] ^= secret; */ + __m512i const key_vec = _mm512_loadu_si512(secret); + __m512i const data_key = _mm512_xor_si512(data_vec, key_vec); + + /* xacc[0] *= XXH_PRIME32_1; */ + __m512i const data_key_hi = + _mm512_shuffle_epi32(data_key, (_MM_PERM_ENUM)_MM_SHUFFLE(0, 3, 0, 1)); + __m512i const prod_lo = _mm512_mul_epu32(data_key, prime32); + __m512i const prod_hi = _mm512_mul_epu32(data_key_hi, prime32); + *xacc = _mm512_add_epi64(prod_lo, _mm512_slli_epi64(prod_hi, 32)); + + } + +} + +XXH_FORCE_INLINE XXH_TARGET_AVX512 void XXH3_initCustomSecret_avx512( + void *XXH_RESTRICT customSecret, xxh_u64 seed64) { + + XXH_STATIC_ASSERT((XXH_SECRET_DEFAULT_SIZE & 63) == 0); + XXH_STATIC_ASSERT(XXH_SEC_ALIGN == 64); + XXH_ASSERT(((size_t)customSecret & 63) == 0); + (void)(&XXH_writeLE64); + { + + int const nbRounds = XXH_SECRET_DEFAULT_SIZE / sizeof(__m512i); + __m512i const seed = _mm512_mask_set1_epi64( + _mm512_set1_epi64((xxh_i64)seed64), 0xAA, -(xxh_i64)seed64); + + XXH_ALIGN(64) const __m512i *const src = (const __m512i *)XXH3_kSecret; + XXH_ALIGN(64) __m512i *const dest = (__m512i *)customSecret; + int i; + for (i = 0; i < nbRounds; ++i) { + + /* GCC has a bug, _mm512_stream_load_si512 accepts 'void*', not 'void + * const*', this will warn "discards ‘const’ qualifier". */ + union { + + XXH_ALIGN(64) const __m512i *cp; + XXH_ALIGN(64) void *p; + + } remote_const_void; + + remote_const_void.cp = src + i; + dest[i] = + _mm512_add_epi64(_mm512_stream_load_si512(remote_const_void.p), seed); + + } + + } + +} + + #endif + + #if (XXH_VECTOR == XXH_AVX2) || defined(XXH_X86DISPATCH) + + #ifndef XXH_TARGET_AVX2 + #define XXH_TARGET_AVX2 /* disable attribute target */ + #endif + +XXH_FORCE_INLINE XXH_TARGET_AVX2 void XXH3_accumulate_512_avx2( + void *XXH_RESTRICT acc, const void *XXH_RESTRICT input, + const void *XXH_RESTRICT secret) { + + XXH_ASSERT((((size_t)acc) & 31) == 0); + { + + XXH_ALIGN(32) __m256i *const xacc = (__m256i *)acc; + /* Unaligned. This is mainly for pointer arithmetic, and because + * _mm256_loadu_si256 requires a const __m256i * pointer for some reason. + */ + const __m256i *const xinput = (const __m256i *)input; + /* Unaligned. This is mainly for pointer arithmetic, and because + * _mm256_loadu_si256 requires a const __m256i * pointer for some reason. */ + const __m256i *const xsecret = (const __m256i *)secret; + + size_t i; + for (i = 0; i < XXH_STRIPE_LEN / sizeof(__m256i); i++) { + + /* data_vec = xinput[i]; */ + __m256i const data_vec = _mm256_loadu_si256(xinput + i); + /* key_vec = xsecret[i]; */ + __m256i const key_vec = _mm256_loadu_si256(xsecret + i); + /* data_key = data_vec ^ key_vec; */ + __m256i const data_key = _mm256_xor_si256(data_vec, key_vec); + /* data_key_lo = data_key >> 32; */ + __m256i const data_key_lo = + _mm256_shuffle_epi32(data_key, _MM_SHUFFLE(0, 3, 0, 1)); + /* product = (data_key & 0xffffffff) * (data_key_lo & 0xffffffff); */ + __m256i const product = _mm256_mul_epu32(data_key, data_key_lo); + /* xacc[i] += swap(data_vec); */ + __m256i const data_swap = + _mm256_shuffle_epi32(data_vec, _MM_SHUFFLE(1, 0, 3, 2)); + __m256i const sum = _mm256_add_epi64(xacc[i], data_swap); + /* xacc[i] += product; */ + xacc[i] = _mm256_add_epi64(product, sum); + + } + + } + +} + +XXH_FORCE_INLINE XXH_TARGET_AVX2 void XXH3_scrambleAcc_avx2( + void *XXH_RESTRICT acc, const void *XXH_RESTRICT secret) { + + XXH_ASSERT((((size_t)acc) & 31) == 0); + { + + XXH_ALIGN(32) __m256i *const xacc = (__m256i *)acc; + /* Unaligned. This is mainly for pointer arithmetic, and because + * _mm256_loadu_si256 requires a const __m256i * pointer for some reason. */ + const __m256i *const xsecret = (const __m256i *)secret; + const __m256i prime32 = _mm256_set1_epi32((int)XXH_PRIME32_1); + + size_t i; + for (i = 0; i < XXH_STRIPE_LEN / sizeof(__m256i); i++) { + + /* xacc[i] ^= (xacc[i] >> 47) */ + __m256i const acc_vec = xacc[i]; + __m256i const shifted = _mm256_srli_epi64(acc_vec, 47); + __m256i const data_vec = _mm256_xor_si256(acc_vec, shifted); + /* xacc[i] ^= xsecret; */ + __m256i const key_vec = _mm256_loadu_si256(xsecret + i); + __m256i const data_key = _mm256_xor_si256(data_vec, key_vec); + + /* xacc[i] *= XXH_PRIME32_1; */ + __m256i const data_key_hi = + _mm256_shuffle_epi32(data_key, _MM_SHUFFLE(0, 3, 0, 1)); + __m256i const prod_lo = _mm256_mul_epu32(data_key, prime32); + __m256i const prod_hi = _mm256_mul_epu32(data_key_hi, prime32); + xacc[i] = _mm256_add_epi64(prod_lo, _mm256_slli_epi64(prod_hi, 32)); + + } + + } + +} + +XXH_FORCE_INLINE XXH_TARGET_AVX2 void XXH3_initCustomSecret_avx2( + void *XXH_RESTRICT customSecret, xxh_u64 seed64) { + + XXH_STATIC_ASSERT((XXH_SECRET_DEFAULT_SIZE & 31) == 0); + XXH_STATIC_ASSERT((XXH_SECRET_DEFAULT_SIZE / sizeof(__m256i)) == 6); + XXH_STATIC_ASSERT(XXH_SEC_ALIGN <= 64); + (void)(&XXH_writeLE64); + XXH_PREFETCH(customSecret); + { + + __m256i const seed = _mm256_set_epi64x(-(xxh_i64)seed64, (xxh_i64)seed64, + -(xxh_i64)seed64, (xxh_i64)seed64); + + XXH_ALIGN(64) const __m256i *const src = (const __m256i *)XXH3_kSecret; + XXH_ALIGN(64) __m256i * dest = (__m256i *)customSecret; + + #if defined(__GNUC__) || defined(__clang__) + /* + * On GCC & Clang, marking 'dest' as modified will cause the compiler: + * - do not extract the secret from sse registers in the internal loop + * - use less common registers, and avoid pushing these reg into stack + * The asm hack causes Clang to assume that XXH3_kSecretPtr aliases with + * customSecret, and on aarch64, this prevented LDP from merging two + * loads together for free. Putting the loads together before the stores + * properly generates LDP. + */ + __asm__("" : "+r"(dest)); + #endif + + /* GCC -O2 need unroll loop manually */ + dest[0] = _mm256_add_epi64(_mm256_stream_load_si256(src + 0), seed); + dest[1] = _mm256_add_epi64(_mm256_stream_load_si256(src + 1), seed); + dest[2] = _mm256_add_epi64(_mm256_stream_load_si256(src + 2), seed); + dest[3] = _mm256_add_epi64(_mm256_stream_load_si256(src + 3), seed); + dest[4] = _mm256_add_epi64(_mm256_stream_load_si256(src + 4), seed); + dest[5] = _mm256_add_epi64(_mm256_stream_load_si256(src + 5), seed); + + } + +} + + #endif + + #if (XXH_VECTOR == XXH_SSE2) || defined(XXH_X86DISPATCH) + + #ifndef XXH_TARGET_SSE2 + #define XXH_TARGET_SSE2 /* disable attribute target */ + #endif + +XXH_FORCE_INLINE XXH_TARGET_SSE2 void XXH3_accumulate_512_sse2( + void *XXH_RESTRICT acc, const void *XXH_RESTRICT input, + const void *XXH_RESTRICT secret) { + + /* SSE2 is just a half-scale version of the AVX2 version. */ + XXH_ASSERT((((size_t)acc) & 15) == 0); + { + + XXH_ALIGN(16) __m128i *const xacc = (__m128i *)acc; + /* Unaligned. This is mainly for pointer arithmetic, and because + * _mm_loadu_si128 requires a const __m128i * pointer for some reason. */ + const __m128i *const xinput = (const __m128i *)input; + /* Unaligned. This is mainly for pointer arithmetic, and because + * _mm_loadu_si128 requires a const __m128i * pointer for some reason. */ + const __m128i *const xsecret = (const __m128i *)secret; + + size_t i; + for (i = 0; i < XXH_STRIPE_LEN / sizeof(__m128i); i++) { + + /* data_vec = xinput[i]; */ + __m128i const data_vec = _mm_loadu_si128(xinput + i); + /* key_vec = xsecret[i]; */ + __m128i const key_vec = _mm_loadu_si128(xsecret + i); + /* data_key = data_vec ^ key_vec; */ + __m128i const data_key = _mm_xor_si128(data_vec, key_vec); + /* data_key_lo = data_key >> 32; */ + __m128i const data_key_lo = + _mm_shuffle_epi32(data_key, _MM_SHUFFLE(0, 3, 0, 1)); + /* product = (data_key & 0xffffffff) * (data_key_lo & 0xffffffff); */ + __m128i const product = _mm_mul_epu32(data_key, data_key_lo); + /* xacc[i] += swap(data_vec); */ + __m128i const data_swap = + _mm_shuffle_epi32(data_vec, _MM_SHUFFLE(1, 0, 3, 2)); + __m128i const sum = _mm_add_epi64(xacc[i], data_swap); + /* xacc[i] += product; */ + xacc[i] = _mm_add_epi64(product, sum); + + } + + } + +} + +XXH_FORCE_INLINE XXH_TARGET_SSE2 void XXH3_scrambleAcc_sse2( + void *XXH_RESTRICT acc, const void *XXH_RESTRICT secret) { + + XXH_ASSERT((((size_t)acc) & 15) == 0); + { + + XXH_ALIGN(16) __m128i *const xacc = (__m128i *)acc; + /* Unaligned. This is mainly for pointer arithmetic, and because + * _mm_loadu_si128 requires a const __m128i * pointer for some reason. */ + const __m128i *const xsecret = (const __m128i *)secret; + const __m128i prime32 = _mm_set1_epi32((int)XXH_PRIME32_1); + + size_t i; + for (i = 0; i < XXH_STRIPE_LEN / sizeof(__m128i); i++) { + + /* xacc[i] ^= (xacc[i] >> 47) */ + __m128i const acc_vec = xacc[i]; + __m128i const shifted = _mm_srli_epi64(acc_vec, 47); + __m128i const data_vec = _mm_xor_si128(acc_vec, shifted); + /* xacc[i] ^= xsecret[i]; */ + __m128i const key_vec = _mm_loadu_si128(xsecret + i); + __m128i const data_key = _mm_xor_si128(data_vec, key_vec); + + /* xacc[i] *= XXH_PRIME32_1; */ + __m128i const data_key_hi = + _mm_shuffle_epi32(data_key, _MM_SHUFFLE(0, 3, 0, 1)); + __m128i const prod_lo = _mm_mul_epu32(data_key, prime32); + __m128i const prod_hi = _mm_mul_epu32(data_key_hi, prime32); + xacc[i] = _mm_add_epi64(prod_lo, _mm_slli_epi64(prod_hi, 32)); + + } + + } + +} + +XXH_FORCE_INLINE XXH_TARGET_SSE2 void XXH3_initCustomSecret_sse2( + void *XXH_RESTRICT customSecret, xxh_u64 seed64) { + + XXH_STATIC_ASSERT((XXH_SECRET_DEFAULT_SIZE & 15) == 0); + (void)(&XXH_writeLE64); + { + + int const nbRounds = XXH_SECRET_DEFAULT_SIZE / sizeof(__m128i); + + #if defined(_MSC_VER) && defined(_M_IX86) && _MSC_VER < 1900 + // MSVC 32bit mode does not support _mm_set_epi64x before 2015 + XXH_ALIGN(16) + const xxh_i64 seed64x2[2] = {(xxh_i64)seed64, -(xxh_i64)seed64}; + __m128i const seed = _mm_load_si128((__m128i const *)seed64x2); + #else + __m128i const seed = _mm_set_epi64x(-(xxh_i64)seed64, (xxh_i64)seed64); + #endif + int i; + + XXH_ALIGN(64) const float *const src = (float const *)XXH3_kSecret; + XXH_ALIGN(XXH_SEC_ALIGN) __m128i *dest = (__m128i *)customSecret; + #if defined(__GNUC__) || defined(__clang__) + /* + * On GCC & Clang, marking 'dest' as modified will cause the compiler: + * - do not extract the secret from sse registers in the internal loop + * - use less common registers, and avoid pushing these reg into stack + */ + __asm__("" : "+r"(dest)); + #endif + + for (i = 0; i < nbRounds; ++i) { + + dest[i] = _mm_add_epi64(_mm_castps_si128(_mm_load_ps(src + i * 4)), seed); + + } + + } + +} + + #endif + + #if (XXH_VECTOR == XXH_NEON) + +XXH_FORCE_INLINE void XXH3_accumulate_512_neon( + void *XXH_RESTRICT acc, const void *XXH_RESTRICT input, + const void *XXH_RESTRICT secret) { + + XXH_ASSERT((((size_t)acc) & 15) == 0); + { + + XXH_ALIGN(16) uint64x2_t *const xacc = (uint64x2_t *)acc; + /* We don't use a uint32x4_t pointer because it causes bus errors on ARMv7. + */ + uint8_t const *const xinput = (const uint8_t *)input; + uint8_t const *const xsecret = (const uint8_t *)secret; + + size_t i; + for (i = 0; i < XXH_STRIPE_LEN / sizeof(uint64x2_t); i++) { + + /* data_vec = xinput[i]; */ + uint8x16_t data_vec = vld1q_u8(xinput + (i * 16)); + /* key_vec = xsecret[i]; */ + uint8x16_t key_vec = vld1q_u8(xsecret + (i * 16)); + uint64x2_t data_key; + uint32x2_t data_key_lo, data_key_hi; + /* xacc[i] += swap(data_vec); */ + uint64x2_t const data64 = vreinterpretq_u64_u8(data_vec); + uint64x2_t const swapped = vextq_u64(data64, data64, 1); + xacc[i] = vaddq_u64(xacc[i], swapped); + /* data_key = data_vec ^ key_vec; */ + data_key = vreinterpretq_u64_u8(veorq_u8(data_vec, key_vec)); + /* data_key_lo = (uint32x2_t) (data_key & 0xFFFFFFFF); + * data_key_hi = (uint32x2_t) (data_key >> 32); + * data_key = UNDEFINED; */ + XXH_SPLIT_IN_PLACE(data_key, data_key_lo, data_key_hi); + /* xacc[i] += (uint64x2_t) data_key_lo * (uint64x2_t) data_key_hi; */ + xacc[i] = vmlal_u32(xacc[i], data_key_lo, data_key_hi); + + } + + } + +} + +XXH_FORCE_INLINE void XXH3_scrambleAcc_neon(void *XXH_RESTRICT acc, + const void *XXH_RESTRICT secret) { + + XXH_ASSERT((((size_t)acc) & 15) == 0); + + { + + uint64x2_t * xacc = (uint64x2_t *)acc; + uint8_t const *xsecret = (uint8_t const *)secret; + uint32x2_t prime = vdup_n_u32(XXH_PRIME32_1); + + size_t i; + for (i = 0; i < XXH_STRIPE_LEN / sizeof(uint64x2_t); i++) { + + /* xacc[i] ^= (xacc[i] >> 47); */ + uint64x2_t acc_vec = xacc[i]; + uint64x2_t shifted = vshrq_n_u64(acc_vec, 47); + uint64x2_t data_vec = veorq_u64(acc_vec, shifted); + + /* xacc[i] ^= xsecret[i]; */ + uint8x16_t key_vec = vld1q_u8(xsecret + (i * 16)); + uint64x2_t data_key = veorq_u64(data_vec, vreinterpretq_u64_u8(key_vec)); + + /* xacc[i] *= XXH_PRIME32_1 */ + uint32x2_t data_key_lo, data_key_hi; + /* data_key_lo = (uint32x2_t) (xacc[i] & 0xFFFFFFFF); + * data_key_hi = (uint32x2_t) (xacc[i] >> 32); + * xacc[i] = UNDEFINED; */ + XXH_SPLIT_IN_PLACE(data_key, data_key_lo, data_key_hi); + { /* + * prod_hi = (data_key >> 32) * XXH_PRIME32_1; + * + * Avoid vmul_u32 + vshll_n_u32 since Clang 6 and 7 will + * incorrectly "optimize" this: + * tmp = vmul_u32(vmovn_u64(a), vmovn_u64(b)); + * shifted = vshll_n_u32(tmp, 32); + * to this: + * tmp = "vmulq_u64"(a, b); // no such thing! + * shifted = vshlq_n_u64(tmp, 32); + * + * However, unlike SSE, Clang lacks a 64-bit multiply routine + * for NEON, and it scalarizes two 64-bit multiplies instead. + * + * vmull_u32 has the same timing as vmul_u32, and it avoids + * this bug completely. + * See https://bugs.llvm.org/show_bug.cgi?id=39967 + */ + uint64x2_t prod_hi = vmull_u32(data_key_hi, prime); + /* xacc[i] = prod_hi << 32; */ + xacc[i] = vshlq_n_u64(prod_hi, 32); + /* xacc[i] += (prod_hi & 0xFFFFFFFF) * XXH_PRIME32_1; */ + xacc[i] = vmlal_u32(xacc[i], data_key_lo, prime); + + } + + } + + } + +} + + #endif + + #if (XXH_VECTOR == XXH_VSX) + +XXH_FORCE_INLINE void XXH3_accumulate_512_vsx(void *XXH_RESTRICT acc, + const void *XXH_RESTRICT input, + const void *XXH_RESTRICT secret) { + + xxh_u64x2 *const xacc = (xxh_u64x2 *)acc; /* presumed aligned */ + xxh_u64x2 const *const xinput = + (xxh_u64x2 const *)input; /* no alignment restriction */ + xxh_u64x2 const *const xsecret = + (xxh_u64x2 const *)secret; /* no alignment restriction */ + xxh_u64x2 const v32 = {32, 32}; + size_t i; + for (i = 0; i < XXH_STRIPE_LEN / sizeof(xxh_u64x2); i++) { + + /* data_vec = xinput[i]; */ + xxh_u64x2 const data_vec = XXH_vec_loadu(xinput + i); + /* key_vec = xsecret[i]; */ + xxh_u64x2 const key_vec = XXH_vec_loadu(xsecret + i); + xxh_u64x2 const data_key = data_vec ^ key_vec; + /* shuffled = (data_key << 32) | (data_key >> 32); */ + xxh_u32x4 const shuffled = (xxh_u32x4)vec_rl(data_key, v32); + /* product = ((xxh_u64x2)data_key & 0xFFFFFFFF) * ((xxh_u64x2)shuffled & + * 0xFFFFFFFF); */ + xxh_u64x2 const product = XXH_vec_mulo((xxh_u32x4)data_key, shuffled); + xacc[i] += product; + + /* swap high and low halves */ + #ifdef __s390x__ + xacc[i] += vec_permi(data_vec, data_vec, 2); + #else + xacc[i] += vec_xxpermdi(data_vec, data_vec, 2); + #endif + + } + +} + +XXH_FORCE_INLINE void XXH3_scrambleAcc_vsx(void *XXH_RESTRICT acc, + const void *XXH_RESTRICT secret) { + + XXH_ASSERT((((size_t)acc) & 15) == 0); + + { + + xxh_u64x2 *const xacc = (xxh_u64x2 *)acc; + const xxh_u64x2 *const xsecret = (const xxh_u64x2 *)secret; + /* constants */ + xxh_u64x2 const v32 = {32, 32}; + xxh_u64x2 const v47 = {47, 47}; + xxh_u32x4 const prime = {XXH_PRIME32_1, XXH_PRIME32_1, XXH_PRIME32_1, + XXH_PRIME32_1}; + size_t i; + for (i = 0; i < XXH_STRIPE_LEN / sizeof(xxh_u64x2); i++) { + + /* xacc[i] ^= (xacc[i] >> 47); */ + xxh_u64x2 const acc_vec = xacc[i]; + xxh_u64x2 const data_vec = acc_vec ^ (acc_vec >> v47); + + /* xacc[i] ^= xsecret[i]; */ + xxh_u64x2 const key_vec = XXH_vec_loadu(xsecret + i); + xxh_u64x2 const data_key = data_vec ^ key_vec; + + /* xacc[i] *= XXH_PRIME32_1 */ + /* prod_lo = ((xxh_u64x2)data_key & 0xFFFFFFFF) * ((xxh_u64x2)prime & + * 0xFFFFFFFF); */ + xxh_u64x2 const prod_even = XXH_vec_mule((xxh_u32x4)data_key, prime); + /* prod_hi = ((xxh_u64x2)data_key >> 32) * ((xxh_u64x2)prime >> 32); */ + xxh_u64x2 const prod_odd = XXH_vec_mulo((xxh_u32x4)data_key, prime); + xacc[i] = prod_odd + (prod_even << v32); + + } + + } + +} + + #endif + +/* scalar variants - universal */ + +XXH_FORCE_INLINE void XXH3_accumulate_512_scalar( + void *XXH_RESTRICT acc, const void *XXH_RESTRICT input, + const void *XXH_RESTRICT secret) { + + XXH_ALIGN(XXH_ACC_ALIGN) + xxh_u64 *const xacc = (xxh_u64 *)acc; /* presumed aligned */ + const xxh_u8 *const xinput = + (const xxh_u8 *)input; /* no alignment restriction */ + const xxh_u8 *const xsecret = + (const xxh_u8 *)secret; /* no alignment restriction */ + size_t i; + XXH_ASSERT(((size_t)acc & (XXH_ACC_ALIGN - 1)) == 0); + for (i = 0; i < XXH_ACC_NB; i++) { + + xxh_u64 const data_val = XXH_readLE64(xinput + 8 * i); + xxh_u64 const data_key = data_val ^ XXH_readLE64(xsecret + i * 8); + xacc[i ^ 1] += data_val; /* swap adjacent lanes */ + xacc[i] += XXH_mult32to64(data_key & 0xFFFFFFFF, data_key >> 32); + + } + +} + +XXH_FORCE_INLINE void XXH3_scrambleAcc_scalar(void *XXH_RESTRICT acc, + const void *XXH_RESTRICT secret) { + + XXH_ALIGN(XXH_ACC_ALIGN) + xxh_u64 *const xacc = (xxh_u64 *)acc; /* presumed aligned */ + const xxh_u8 *const xsecret = + (const xxh_u8 *)secret; /* no alignment restriction */ + size_t i; + XXH_ASSERT((((size_t)acc) & (XXH_ACC_ALIGN - 1)) == 0); + for (i = 0; i < XXH_ACC_NB; i++) { + + xxh_u64 const key64 = XXH_readLE64(xsecret + 8 * i); + xxh_u64 acc64 = xacc[i]; + acc64 = XXH_xorshift64(acc64, 47); + acc64 ^= key64; + acc64 *= XXH_PRIME32_1; + xacc[i] = acc64; + + } + +} + +XXH_FORCE_INLINE void XXH3_initCustomSecret_scalar( + void *XXH_RESTRICT customSecret, xxh_u64 seed64) { + + /* + * We need a separate pointer for the hack below, + * which requires a non-const pointer. + * Any decent compiler will optimize this out otherwise. + */ + const xxh_u8 *kSecretPtr = XXH3_kSecret; + XXH_STATIC_ASSERT((XXH_SECRET_DEFAULT_SIZE & 15) == 0); + + #if defined(__clang__) && defined(__aarch64__) + /* + * UGLY HACK: + * Clang generates a bunch of MOV/MOVK pairs for aarch64, and they are + * placed sequentially, in order, at the top of the unrolled loop. + * + * While MOVK is great for generating constants (2 cycles for a 64-bit + * constant compared to 4 cycles for LDR), long MOVK chains stall the + * integer pipelines: + * I L S + * MOVK + * MOVK + * MOVK + * MOVK + * ADD + * SUB STR + * STR + * By forcing loads from memory (as the asm line causes Clang to assume + * that XXH3_kSecretPtr has been changed), the pipelines are used more + * efficiently: + * I L S + * LDR + * ADD LDR + * SUB STR + * STR + * XXH3_64bits_withSeed, len == 256, Snapdragon 835 + * without hack: 2654.4 MB/s + * with hack: 3202.9 MB/s + */ + __asm__("" : "+r"(kSecretPtr)); + #endif + /* + * Note: in debug mode, this overrides the asm optimization + * and Clang will emit MOVK chains again. + */ + XXH_ASSERT(kSecretPtr == XXH3_kSecret); + + { + + int const nbRounds = XXH_SECRET_DEFAULT_SIZE / 16; + int i; + for (i = 0; i < nbRounds; i++) { + + /* + * The asm hack causes Clang to assume that kSecretPtr aliases with + * customSecret, and on aarch64, this prevented LDP from merging two + * loads together for free. Putting the loads together before the stores + * properly generates LDP. + */ + xxh_u64 lo = XXH_readLE64(kSecretPtr + 16 * i) + seed64; + xxh_u64 hi = XXH_readLE64(kSecretPtr + 16 * i + 8) - seed64; + XXH_writeLE64((xxh_u8 *)customSecret + 16 * i, lo); + XXH_writeLE64((xxh_u8 *)customSecret + 16 * i + 8, hi); + + } + + } + +} + +typedef void (*XXH3_f_accumulate_512)(void *XXH_RESTRICT, const void *, + const void *); +typedef void (*XXH3_f_scrambleAcc)(void *XXH_RESTRICT, const void *); +typedef void (*XXH3_f_initCustomSecret)(void *XXH_RESTRICT, xxh_u64); + + #if (XXH_VECTOR == XXH_AVX512) + + #define XXH3_accumulate_512 XXH3_accumulate_512_avx512 + #define XXH3_scrambleAcc XXH3_scrambleAcc_avx512 + #define XXH3_initCustomSecret XXH3_initCustomSecret_avx512 + + #elif (XXH_VECTOR == XXH_AVX2) + + #define XXH3_accumulate_512 XXH3_accumulate_512_avx2 + #define XXH3_scrambleAcc XXH3_scrambleAcc_avx2 + #define XXH3_initCustomSecret XXH3_initCustomSecret_avx2 + + #elif (XXH_VECTOR == XXH_SSE2) + + #define XXH3_accumulate_512 XXH3_accumulate_512_sse2 + #define XXH3_scrambleAcc XXH3_scrambleAcc_sse2 + #define XXH3_initCustomSecret XXH3_initCustomSecret_sse2 + + #elif (XXH_VECTOR == XXH_NEON) + + #define XXH3_accumulate_512 XXH3_accumulate_512_neon + #define XXH3_scrambleAcc XXH3_scrambleAcc_neon + #define XXH3_initCustomSecret XXH3_initCustomSecret_scalar + + #elif (XXH_VECTOR == XXH_VSX) + + #define XXH3_accumulate_512 XXH3_accumulate_512_vsx + #define XXH3_scrambleAcc XXH3_scrambleAcc_vsx + #define XXH3_initCustomSecret XXH3_initCustomSecret_scalar + + #else /* scalar */ + + #define XXH3_accumulate_512 XXH3_accumulate_512_scalar + #define XXH3_scrambleAcc XXH3_scrambleAcc_scalar + #define XXH3_initCustomSecret XXH3_initCustomSecret_scalar + + #endif + + #ifndef XXH_PREFETCH_DIST + #ifdef __clang__ + #define XXH_PREFETCH_DIST 320 + #else + #if (XXH_VECTOR == XXH_AVX512) + #define XXH_PREFETCH_DIST 512 + #else + #define XXH_PREFETCH_DIST 384 + #endif + #endif /* __clang__ */ + #endif /* XXH_PREFETCH_DIST */ + +/* + * XXH3_accumulate() + * Loops over XXH3_accumulate_512(). + * Assumption: nbStripes will not overflow the secret size + */ +XXH_FORCE_INLINE void XXH3_accumulate(xxh_u64 *XXH_RESTRICT acc, + const xxh_u8 *XXH_RESTRICT input, + const xxh_u8 *XXH_RESTRICT secret, + size_t nbStripes, + XXH3_f_accumulate_512 f_acc512) { + + size_t n; + for (n = 0; n < nbStripes; n++) { + + const xxh_u8 *const in = input + n * XXH_STRIPE_LEN; + XXH_PREFETCH(in + XXH_PREFETCH_DIST); + f_acc512(acc, in, secret + n * XXH_SECRET_CONSUME_RATE); + + } + +} + +XXH_FORCE_INLINE void XXH3_hashLong_internal_loop( + xxh_u64 *XXH_RESTRICT acc, const xxh_u8 *XXH_RESTRICT input, size_t len, + const xxh_u8 *XXH_RESTRICT secret, size_t secretSize, + XXH3_f_accumulate_512 f_acc512, XXH3_f_scrambleAcc f_scramble) { + + size_t const nbStripesPerBlock = + (secretSize - XXH_STRIPE_LEN) / XXH_SECRET_CONSUME_RATE; + size_t const block_len = XXH_STRIPE_LEN * nbStripesPerBlock; + size_t const nb_blocks = (len - 1) / block_len; + + size_t n; + + XXH_ASSERT(secretSize >= XXH3_SECRET_SIZE_MIN); + + for (n = 0; n < nb_blocks; n++) { + + XXH3_accumulate(acc, input + n * block_len, secret, nbStripesPerBlock, + f_acc512); + f_scramble(acc, secret + secretSize - XXH_STRIPE_LEN); + + } + + /* last partial block */ + XXH_ASSERT(len > XXH_STRIPE_LEN); + { + + size_t const nbStripes = + ((len - 1) - (block_len * nb_blocks)) / XXH_STRIPE_LEN; + XXH_ASSERT(nbStripes <= (secretSize / XXH_SECRET_CONSUME_RATE)); + XXH3_accumulate(acc, input + nb_blocks * block_len, secret, nbStripes, + f_acc512); + + /* last stripe */ + { + + const xxh_u8 *const p = input + len - XXH_STRIPE_LEN; + #define XXH_SECRET_LASTACC_START \ + 7 /* not aligned on 8, last secret is different from acc & scrambler */ + f_acc512(acc, p, + secret + secretSize - XXH_STRIPE_LEN - XXH_SECRET_LASTACC_START); + + } + + } + +} + +XXH_FORCE_INLINE xxh_u64 XXH3_mix2Accs(const xxh_u64 *XXH_RESTRICT acc, + const xxh_u8 *XXH_RESTRICT secret) { + + return XXH3_mul128_fold64(acc[0] ^ XXH_readLE64(secret), + acc[1] ^ XXH_readLE64(secret + 8)); + +} + +static XXH64_hash_t XXH3_mergeAccs(const xxh_u64 *XXH_RESTRICT acc, + const xxh_u8 *XXH_RESTRICT secret, + xxh_u64 start) { + + xxh_u64 result64 = start; + size_t i = 0; + + for (i = 0; i < 4; i++) { + + result64 += XXH3_mix2Accs(acc + 2 * i, secret + 16 * i); + #if defined(__clang__) /* Clang */ \ + && (defined(__arm__) || defined(__thumb__)) /* ARMv7 */ \ + && (defined(__ARM_NEON) || defined(__ARM_NEON__)) /* NEON */ \ + && !defined(XXH_ENABLE_AUTOVECTORIZE) /* Define to disable */ + /* + * UGLY HACK: + * Prevent autovectorization on Clang ARMv7-a. Exact same problem as + * the one in XXH3_len_129to240_64b. Speeds up shorter keys > 240b. + * XXH3_64bits, len == 256, Snapdragon 835: + * without hack: 2063.7 MB/s + * with hack: 2560.7 MB/s + */ + __asm__("" : "+r"(result64)); + #endif + + } + + return XXH3_avalanche(result64); + +} + + #define XXH3_INIT_ACC \ + { \ + \ + XXH_PRIME32_3, XXH_PRIME64_1, XXH_PRIME64_2, XXH_PRIME64_3, \ + XXH_PRIME64_4, XXH_PRIME32_2, XXH_PRIME64_5, XXH_PRIME32_1 \ + \ + } + +XXH_FORCE_INLINE XXH64_hash_t XXH3_hashLong_64b_internal( + const void *XXH_RESTRICT input, size_t len, const void *XXH_RESTRICT secret, + size_t secretSize, XXH3_f_accumulate_512 f_acc512, + XXH3_f_scrambleAcc f_scramble) { + + XXH_ALIGN(XXH_ACC_ALIGN) xxh_u64 acc[XXH_ACC_NB] = XXH3_INIT_ACC; + + XXH3_hashLong_internal_loop(acc, (const xxh_u8 *)input, len, + (const xxh_u8 *)secret, secretSize, f_acc512, + f_scramble); + + /* converge into final hash */ + XXH_STATIC_ASSERT(sizeof(acc) == 64); + /* do not align on 8, so that the secret is different from the accumulator + */ + #define XXH_SECRET_MERGEACCS_START 11 + XXH_ASSERT(secretSize >= sizeof(acc) + XXH_SECRET_MERGEACCS_START); + return XXH3_mergeAccs(acc, + (const xxh_u8 *)secret + XXH_SECRET_MERGEACCS_START, + (xxh_u64)len * XXH_PRIME64_1); + +} + +/* + * It's important for performance that XXH3_hashLong is not inlined. + */ +XXH_NO_INLINE XXH64_hash_t XXH3_hashLong_64b_withSecret( + const void *XXH_RESTRICT input, size_t len, XXH64_hash_t seed64, + const xxh_u8 *XXH_RESTRICT secret, size_t secretLen) { + + (void)seed64; + return XXH3_hashLong_64b_internal(input, len, secret, secretLen, + XXH3_accumulate_512, XXH3_scrambleAcc); + +} + +/* + * It's important for performance that XXH3_hashLong is not inlined. + * Since the function is not inlined, the compiler may not be able to understand + * that, in some scenarios, its `secret` argument is actually a compile time + * constant. This variant enforces that the compiler can detect that, and uses + * this opportunity to streamline the generated code for better performance. + */ +XXH_NO_INLINE XXH64_hash_t XXH3_hashLong_64b_default( + const void *XXH_RESTRICT input, size_t len, XXH64_hash_t seed64, + const xxh_u8 *XXH_RESTRICT secret, size_t secretLen) { + + (void)seed64; + (void)secret; + (void)secretLen; + return XXH3_hashLong_64b_internal(input, len, XXH3_kSecret, + sizeof(XXH3_kSecret), XXH3_accumulate_512, + XXH3_scrambleAcc); + +} + +/* + * XXH3_hashLong_64b_withSeed(): + * Generate a custom key based on alteration of default XXH3_kSecret with the + * seed, and then use this key for long mode hashing. + * + * This operation is decently fast but nonetheless costs a little bit of time. + * Try to avoid it whenever possible (typically when seed==0). + * + * It's important for performance that XXH3_hashLong is not inlined. Not sure + * why (uop cache maybe?), but the difference is large and easily measurable. + */ +XXH_FORCE_INLINE XXH64_hash_t XXH3_hashLong_64b_withSeed_internal( + const void *input, size_t len, XXH64_hash_t seed, + XXH3_f_accumulate_512 f_acc512, XXH3_f_scrambleAcc f_scramble, + XXH3_f_initCustomSecret f_initSec) { + + if (seed == 0) + return XXH3_hashLong_64b_internal( + input, len, XXH3_kSecret, sizeof(XXH3_kSecret), f_acc512, f_scramble); + { + + XXH_ALIGN(XXH_SEC_ALIGN) xxh_u8 secret[XXH_SECRET_DEFAULT_SIZE]; + f_initSec(secret, seed); + return XXH3_hashLong_64b_internal(input, len, secret, sizeof(secret), + f_acc512, f_scramble); + + } + +} + +/* + * It's important for performance that XXH3_hashLong is not inlined. + */ +XXH_NO_INLINE XXH64_hash_t XXH3_hashLong_64b_withSeed(const void * input, + size_t len, + XXH64_hash_t seed, + const xxh_u8 *secret, + size_t secretLen) { + + (void)secret; + (void)secretLen; + return XXH3_hashLong_64b_withSeed_internal( + input, len, seed, XXH3_accumulate_512, XXH3_scrambleAcc, + XXH3_initCustomSecret); + +} + +typedef XXH64_hash_t (*XXH3_hashLong64_f)(const void *XXH_RESTRICT, size_t, + XXH64_hash_t, + const xxh_u8 *XXH_RESTRICT, size_t); + +XXH_FORCE_INLINE XXH64_hash_t +XXH3_64bits_internal(const void *XXH_RESTRICT input, size_t len, + XXH64_hash_t seed64, const void *XXH_RESTRICT secret, + size_t secretLen, XXH3_hashLong64_f f_hashLong) { + + XXH_ASSERT(secretLen >= XXH3_SECRET_SIZE_MIN); + /* + * If an action is to be taken if `secretLen` condition is not respected, + * it should be done here. + * For now, it's a contract pre-condition. + * Adding a check and a branch here would cost performance at every hash. + * Also, note that function signature doesn't offer room to return an error. + */ + if (len <= 16) + return XXH3_len_0to16_64b((const xxh_u8 *)input, len, + (const xxh_u8 *)secret, seed64); + if (len <= 128) + return XXH3_len_17to128_64b((const xxh_u8 *)input, len, + (const xxh_u8 *)secret, secretLen, seed64); + if (len <= XXH3_MIDSIZE_MAX) + return XXH3_len_129to240_64b((const xxh_u8 *)input, len, + (const xxh_u8 *)secret, secretLen, seed64); + return f_hashLong(input, len, seed64, (const xxh_u8 *)secret, secretLen); + +} + +/* === Public entry point === */ + +XXH_PUBLIC_API XXH64_hash_t XXH3_64bits(const void *input, size_t len) { + + return XXH3_64bits_internal(input, len, 0, XXH3_kSecret, sizeof(XXH3_kSecret), + XXH3_hashLong_64b_default); + +} + +XXH_PUBLIC_API XXH64_hash_t XXH3_64bits_withSecret(const void *input, + size_t len, + const void *secret, + size_t secretSize) { + + return XXH3_64bits_internal(input, len, 0, secret, secretSize, + XXH3_hashLong_64b_withSecret); + +} + +XXH_PUBLIC_API XXH64_hash_t XXH3_64bits_withSeed(const void *input, size_t len, + XXH64_hash_t seed) { + + return XXH3_64bits_internal(input, len, seed, XXH3_kSecret, + sizeof(XXH3_kSecret), XXH3_hashLong_64b_withSeed); + +} + +/* === XXH3 streaming === */ + +/* + * Malloc's a pointer that is always aligned to align. + * + * This must be freed with `XXH_alignedFree()`. + * + * malloc typically guarantees 16 byte alignment on 64-bit systems and 8 byte + * alignment on 32-bit. This isn't enough for the 32 byte aligned loads in AVX2 + * or on 32-bit, the 16 byte aligned loads in SSE2 and NEON. + * + * This underalignment previously caused a rather obvious crash which went + * completely unnoticed due to XXH3_createState() not actually being tested. + * Credit to RedSpah for noticing this bug. + * + * The alignment is done manually: Functions like posix_memalign or _mm_malloc + * are avoided: To maintain portability, we would have to write a fallback + * like this anyways, and besides, testing for the existence of library + * functions without relying on external build tools is impossible. + * + * The method is simple: Overallocate, manually align, and store the offset + * to the original behind the returned pointer. + * + * Align must be a power of 2 and 8 <= align <= 128. + */ +static void *XXH_alignedMalloc(size_t s, size_t align) { + + XXH_ASSERT(align <= 128 && align >= 8); /* range check */ + XXH_ASSERT((align & (align - 1)) == 0); /* power of 2 */ + XXH_ASSERT(s != 0 && s < (s + align)); /* empty/overflow */ + { /* Overallocate to make room for manual realignment and an offset byte */ + xxh_u8 *base = (xxh_u8 *)XXH_malloc(s + align); + if (base != NULL) { + + /* + * Get the offset needed to align this pointer. + * + * Even if the returned pointer is aligned, there will always be + * at least one byte to store the offset to the original pointer. + */ + size_t offset = align - ((size_t)base & (align - 1)); /* base % align */ + /* Add the offset for the now-aligned pointer */ + xxh_u8 *ptr = base + offset; + + XXH_ASSERT((size_t)ptr % align == 0); + + /* Store the offset immediately before the returned pointer. */ + ptr[-1] = (xxh_u8)offset; + return ptr; + + } + + return NULL; + + } + +} + +/* + * Frees an aligned pointer allocated by XXH_alignedMalloc(). Don't pass + * normal malloc'd pointers, XXH_alignedMalloc has a specific data layout. + */ +static void XXH_alignedFree(void *p) { + + if (p != NULL) { + + xxh_u8 *ptr = (xxh_u8 *)p; + /* Get the offset byte we added in XXH_malloc. */ + xxh_u8 offset = ptr[-1]; + /* Free the original malloc'd pointer */ + xxh_u8 *base = ptr - offset; + XXH_free(base); + + } + +} + +XXH_PUBLIC_API XXH3_state_t *XXH3_createState(void) { + + XXH3_state_t *const state = + (XXH3_state_t *)XXH_alignedMalloc(sizeof(XXH3_state_t), 64); + if (state == NULL) return NULL; + XXH3_INITSTATE(state); + return state; + +} + +XXH_PUBLIC_API XXH_errorcode XXH3_freeState(XXH3_state_t *statePtr) { + + XXH_alignedFree(statePtr); + return XXH_OK; + +} + +XXH_PUBLIC_API void XXH3_copyState(XXH3_state_t * dst_state, + const XXH3_state_t *src_state) { + + memcpy(dst_state, src_state, sizeof(*dst_state)); + +} + +static void XXH3_64bits_reset_internal(XXH3_state_t *statePtr, + XXH64_hash_t seed, const void *secret, + size_t secretSize) { + + size_t const initStart = offsetof(XXH3_state_t, bufferedSize); + size_t const initLength = + offsetof(XXH3_state_t, nbStripesPerBlock) - initStart; + XXH_ASSERT(offsetof(XXH3_state_t, nbStripesPerBlock) > initStart); + XXH_ASSERT(statePtr != NULL); + /* set members from bufferedSize to nbStripesPerBlock (excluded) to 0 */ + memset((char *)statePtr + initStart, 0, initLength); + statePtr->acc[0] = XXH_PRIME32_3; + statePtr->acc[1] = XXH_PRIME64_1; + statePtr->acc[2] = XXH_PRIME64_2; + statePtr->acc[3] = XXH_PRIME64_3; + statePtr->acc[4] = XXH_PRIME64_4; + statePtr->acc[5] = XXH_PRIME32_2; + statePtr->acc[6] = XXH_PRIME64_5; + statePtr->acc[7] = XXH_PRIME32_1; + statePtr->seed = seed; + statePtr->extSecret = (const unsigned char *)secret; + XXH_ASSERT(secretSize >= XXH3_SECRET_SIZE_MIN); + statePtr->secretLimit = secretSize - XXH_STRIPE_LEN; + statePtr->nbStripesPerBlock = statePtr->secretLimit / XXH_SECRET_CONSUME_RATE; + +} + +XXH_PUBLIC_API XXH_errorcode XXH3_64bits_reset(XXH3_state_t *statePtr) { + + if (statePtr == NULL) return XXH_ERROR; + XXH3_64bits_reset_internal(statePtr, 0, XXH3_kSecret, + XXH_SECRET_DEFAULT_SIZE); + return XXH_OK; + +} + +XXH_PUBLIC_API XXH_errorcode XXH3_64bits_reset_withSecret( + XXH3_state_t *statePtr, const void *secret, size_t secretSize) { + + if (statePtr == NULL) return XXH_ERROR; + XXH3_64bits_reset_internal(statePtr, 0, secret, secretSize); + if (secret == NULL) return XXH_ERROR; + if (secretSize < XXH3_SECRET_SIZE_MIN) return XXH_ERROR; + return XXH_OK; + +} + +XXH_PUBLIC_API XXH_errorcode XXH3_64bits_reset_withSeed(XXH3_state_t *statePtr, + XXH64_hash_t seed) { + + if (statePtr == NULL) return XXH_ERROR; + if (seed == 0) return XXH3_64bits_reset(statePtr); + if (seed != statePtr->seed) + XXH3_initCustomSecret(statePtr->customSecret, seed); + XXH3_64bits_reset_internal(statePtr, seed, NULL, XXH_SECRET_DEFAULT_SIZE); + return XXH_OK; + +} + +/* Note : when XXH3_consumeStripes() is invoked, + * there must be a guarantee that at least one more byte must be consumed from + * input + * so that the function can blindly consume all stripes using the "normal" + * secret segment */ +XXH_FORCE_INLINE void XXH3_consumeStripes( + xxh_u64 *XXH_RESTRICT acc, size_t *XXH_RESTRICT nbStripesSoFarPtr, + size_t nbStripesPerBlock, const xxh_u8 *XXH_RESTRICT input, + size_t nbStripes, const xxh_u8 *XXH_RESTRICT secret, size_t secretLimit, + XXH3_f_accumulate_512 f_acc512, XXH3_f_scrambleAcc f_scramble) { + + XXH_ASSERT(nbStripes <= + nbStripesPerBlock); /* can handle max 1 scramble per invocation */ + XXH_ASSERT(*nbStripesSoFarPtr < nbStripesPerBlock); + if (nbStripesPerBlock - *nbStripesSoFarPtr <= nbStripes) { + + /* need a scrambling operation */ + size_t const nbStripesToEndofBlock = nbStripesPerBlock - *nbStripesSoFarPtr; + size_t const nbStripesAfterBlock = nbStripes - nbStripesToEndofBlock; + XXH3_accumulate(acc, input, + secret + nbStripesSoFarPtr[0] * XXH_SECRET_CONSUME_RATE, + nbStripesToEndofBlock, f_acc512); + f_scramble(acc, secret + secretLimit); + XXH3_accumulate(acc, input + nbStripesToEndofBlock * XXH_STRIPE_LEN, secret, + nbStripesAfterBlock, f_acc512); + *nbStripesSoFarPtr = nbStripesAfterBlock; + + } else { + + XXH3_accumulate(acc, input, + secret + nbStripesSoFarPtr[0] * XXH_SECRET_CONSUME_RATE, + nbStripes, f_acc512); + *nbStripesSoFarPtr += nbStripes; + + } + +} + +/* + * Both XXH3_64bits_update and XXH3_128bits_update use this routine. + */ +XXH_FORCE_INLINE XXH_errorcode XXH3_update(XXH3_state_t *state, + const xxh_u8 *input, size_t len, + XXH3_f_accumulate_512 f_acc512, + XXH3_f_scrambleAcc f_scramble) { + + if (input == NULL) + #if defined(XXH_ACCEPT_NULL_INPUT_POINTER) && \ + (XXH_ACCEPT_NULL_INPUT_POINTER >= 1) + return XXH_OK; + #else + return XXH_ERROR; + #endif + + { + + const xxh_u8 *const bEnd = input + len; + const unsigned char *const secret = + (state->extSecret == NULL) ? state->customSecret : state->extSecret; + + state->totalLen += len; + + if (state->bufferedSize + len <= + XXH3_INTERNALBUFFER_SIZE) { /* fill in tmp buffer */ + XXH_memcpy(state->buffer + state->bufferedSize, input, len); + state->bufferedSize += (XXH32_hash_t)len; + return XXH_OK; + + } + + /* total input is now > XXH3_INTERNALBUFFER_SIZE */ + + #define XXH3_INTERNALBUFFER_STRIPES \ + (XXH3_INTERNALBUFFER_SIZE / XXH_STRIPE_LEN) + XXH_STATIC_ASSERT(XXH3_INTERNALBUFFER_SIZE % XXH_STRIPE_LEN == + 0); /* clean multiple */ + + /* + * Internal buffer is partially filled (always, except at beginning) + * Complete it, then consume it. + */ + if (state->bufferedSize) { + + size_t const loadSize = XXH3_INTERNALBUFFER_SIZE - state->bufferedSize; + XXH_memcpy(state->buffer + state->bufferedSize, input, loadSize); + input += loadSize; + XXH3_consumeStripes(state->acc, &state->nbStripesSoFar, + state->nbStripesPerBlock, state->buffer, + XXH3_INTERNALBUFFER_STRIPES, secret, + state->secretLimit, f_acc512, f_scramble); + state->bufferedSize = 0; + + } + + XXH_ASSERT(input < bEnd); + + /* Consume input by a multiple of internal buffer size */ + if (input + XXH3_INTERNALBUFFER_SIZE < bEnd) { + + const xxh_u8 *const limit = bEnd - XXH3_INTERNALBUFFER_SIZE; + do { + + XXH3_consumeStripes(state->acc, &state->nbStripesSoFar, + state->nbStripesPerBlock, input, + XXH3_INTERNALBUFFER_STRIPES, secret, + state->secretLimit, f_acc512, f_scramble); + input += XXH3_INTERNALBUFFER_SIZE; + + } while (input < limit); + + /* for last partial stripe */ + memcpy(state->buffer + sizeof(state->buffer) - XXH_STRIPE_LEN, + input - XXH_STRIPE_LEN, XXH_STRIPE_LEN); + + } + + XXH_ASSERT(input < bEnd); + + /* Some remaining input (always) : buffer it */ + XXH_memcpy(state->buffer, input, (size_t)(bEnd - input)); + state->bufferedSize = (XXH32_hash_t)(bEnd - input); + + } + + return XXH_OK; + +} + +XXH_PUBLIC_API XXH_errorcode XXH3_64bits_update(XXH3_state_t *state, + const void *input, size_t len) { + + return XXH3_update(state, (const xxh_u8 *)input, len, XXH3_accumulate_512, + XXH3_scrambleAcc); + +} + +XXH_FORCE_INLINE void XXH3_digest_long(XXH64_hash_t * acc, + const XXH3_state_t * state, + const unsigned char *secret) { + + /* + * Digest on a local copy. This way, the state remains unaltered, and it can + * continue ingesting more input afterwards. + */ + memcpy(acc, state->acc, sizeof(state->acc)); + if (state->bufferedSize >= XXH_STRIPE_LEN) { + + size_t const nbStripes = (state->bufferedSize - 1) / XXH_STRIPE_LEN; + size_t nbStripesSoFar = state->nbStripesSoFar; + XXH3_consumeStripes(acc, &nbStripesSoFar, state->nbStripesPerBlock, + state->buffer, nbStripes, secret, state->secretLimit, + XXH3_accumulate_512, XXH3_scrambleAcc); + /* last stripe */ + XXH3_accumulate_512(acc, + state->buffer + state->bufferedSize - XXH_STRIPE_LEN, + secret + state->secretLimit - XXH_SECRET_LASTACC_START); + + } else { /* bufferedSize < XXH_STRIPE_LEN */ + + xxh_u8 lastStripe[XXH_STRIPE_LEN]; + size_t const catchupSize = XXH_STRIPE_LEN - state->bufferedSize; + XXH_ASSERT(state->bufferedSize > + 0); /* there is always some input buffered */ + memcpy(lastStripe, state->buffer + sizeof(state->buffer) - catchupSize, + catchupSize); + memcpy(lastStripe + catchupSize, state->buffer, state->bufferedSize); + XXH3_accumulate_512(acc, lastStripe, + secret + state->secretLimit - XXH_SECRET_LASTACC_START); + + } + +} + +XXH_PUBLIC_API XXH64_hash_t XXH3_64bits_digest(const XXH3_state_t *state) { + + const unsigned char *const secret = + (state->extSecret == NULL) ? state->customSecret : state->extSecret; + if (state->totalLen > XXH3_MIDSIZE_MAX) { + + XXH_ALIGN(XXH_ACC_ALIGN) XXH64_hash_t acc[XXH_ACC_NB]; + XXH3_digest_long(acc, state, secret); + return XXH3_mergeAccs(acc, secret + XXH_SECRET_MERGEACCS_START, + (xxh_u64)state->totalLen * XXH_PRIME64_1); + + } + + /* totalLen <= XXH3_MIDSIZE_MAX: digesting a short input */ + if (state->seed) + return XXH3_64bits_withSeed(state->buffer, (size_t)state->totalLen, + state->seed); + return XXH3_64bits_withSecret(state->buffer, (size_t)(state->totalLen), + secret, state->secretLimit + XXH_STRIPE_LEN); + +} + + #define XXH_MIN(x, y) (((x) > (y)) ? (y) : (x)) + +XXH_PUBLIC_API void XXH3_generateSecret(void * secretBuffer, + const void *customSeed, + size_t customSeedSize) { + + XXH_ASSERT(secretBuffer != NULL); + if (customSeedSize == 0) { + + memcpy(secretBuffer, XXH3_kSecret, XXH_SECRET_DEFAULT_SIZE); + return; + + } + + XXH_ASSERT(customSeed != NULL); + + { + + size_t const segmentSize = sizeof(XXH128_hash_t); + size_t const nbSegments = XXH_SECRET_DEFAULT_SIZE / segmentSize; + XXH128_canonical_t scrambler; + XXH64_hash_t seeds[12]; + size_t segnb; + XXH_ASSERT(nbSegments == 12); + XXH_ASSERT(segmentSize * nbSegments == + XXH_SECRET_DEFAULT_SIZE); /* exact multiple */ + XXH128_canonicalFromHash(&scrambler, XXH128(customSeed, customSeedSize, 0)); + + /* + * Copy customSeed to seeds[], truncating or repeating as necessary. + */ + { + + size_t toFill = XXH_MIN(customSeedSize, sizeof(seeds)); + size_t filled = toFill; + memcpy(seeds, customSeed, toFill); + while (filled < sizeof(seeds)) { + + toFill = XXH_MIN(filled, sizeof(seeds) - filled); + memcpy((char *)seeds + filled, seeds, toFill); + filled += toFill; + + } + + } + + /* generate secret */ + memcpy(secretBuffer, &scrambler, sizeof(scrambler)); + for (segnb = 1; segnb < nbSegments; segnb++) { + + size_t const segmentStart = segnb * segmentSize; + XXH128_canonical_t segment; + XXH128_canonicalFromHash(&segment, + XXH128(&scrambler, sizeof(scrambler), + XXH_readLE64(seeds + segnb) + segnb)); + memcpy((char *)secretBuffer + segmentStart, &segment, sizeof(segment)); + + } + + } + +} + +/* ========================================== + * XXH3 128 bits (a.k.a XXH128) + * ========================================== + * XXH3's 128-bit variant has better mixing and strength than the 64-bit + * variant, even without counting the significantly larger output size. + * + * For example, extra steps are taken to avoid the seed-dependent collisions + * in 17-240 byte inputs (See XXH3_mix16B and XXH128_mix32B). + * + * This strength naturally comes at the cost of some speed, especially on short + * lengths. Note that longer hashes are about as fast as the 64-bit version + * due to it using only a slight modification of the 64-bit loop. + * + * XXH128 is also more oriented towards 64-bit machines. It is still extremely + * fast for a _128-bit_ hash on 32-bit (it usually clears XXH64). + */ + +XXH_FORCE_INLINE XXH128_hash_t XXH3_len_1to3_128b(const xxh_u8 *input, + size_t len, + const xxh_u8 *secret, + XXH64_hash_t seed) { + + /* A doubled version of 1to3_64b with different constants. */ + XXH_ASSERT(input != NULL); + XXH_ASSERT(1 <= len && len <= 3); + XXH_ASSERT(secret != NULL); + /* + * len = 1: combinedl = { input[0], 0x01, input[0], input[0] } + * len = 2: combinedl = { input[1], 0x02, input[0], input[1] } + * len = 3: combinedl = { input[2], 0x03, input[0], input[1] } + */ + { + + xxh_u8 const c1 = input[0]; + xxh_u8 const c2 = input[len >> 1]; + xxh_u8 const c3 = input[len - 1]; + xxh_u32 const combinedl = ((xxh_u32)c1 << 16) | ((xxh_u32)c2 << 24) | + ((xxh_u32)c3 << 0) | ((xxh_u32)len << 8); + xxh_u32 const combinedh = XXH_rotl32(XXH_swap32(combinedl), 13); + xxh_u64 const bitflipl = + (XXH_readLE32(secret) ^ XXH_readLE32(secret + 4)) + seed; + xxh_u64 const bitfliph = + (XXH_readLE32(secret + 8) ^ XXH_readLE32(secret + 12)) - seed; + xxh_u64 const keyed_lo = (xxh_u64)combinedl ^ bitflipl; + xxh_u64 const keyed_hi = (xxh_u64)combinedh ^ bitfliph; + XXH128_hash_t h128; + h128.low64 = XXH64_avalanche(keyed_lo); + h128.high64 = XXH64_avalanche(keyed_hi); + return h128; + + } + +} + +XXH_FORCE_INLINE XXH128_hash_t XXH3_len_4to8_128b(const xxh_u8 *input, + size_t len, + const xxh_u8 *secret, + XXH64_hash_t seed) { + + XXH_ASSERT(input != NULL); + XXH_ASSERT(secret != NULL); + XXH_ASSERT(4 <= len && len <= 8); + seed ^= (xxh_u64)XXH_swap32((xxh_u32)seed) << 32; + { + + xxh_u32 const input_lo = XXH_readLE32(input); + xxh_u32 const input_hi = XXH_readLE32(input + len - 4); + xxh_u64 const input_64 = input_lo + ((xxh_u64)input_hi << 32); + xxh_u64 const bitflip = + (XXH_readLE64(secret + 16) ^ XXH_readLE64(secret + 24)) + seed; + xxh_u64 const keyed = input_64 ^ bitflip; + + /* Shift len to the left to ensure it is even, this avoids even multiplies. + */ + XXH128_hash_t m128 = XXH_mult64to128(keyed, XXH_PRIME64_1 + (len << 2)); + + m128.high64 += (m128.low64 << 1); + m128.low64 ^= (m128.high64 >> 3); + + m128.low64 = XXH_xorshift64(m128.low64, 35); + m128.low64 *= 0x9FB21C651E98DF25ULL; + m128.low64 = XXH_xorshift64(m128.low64, 28); + m128.high64 = XXH3_avalanche(m128.high64); + return m128; + + } + +} + +XXH_FORCE_INLINE XXH128_hash_t XXH3_len_9to16_128b(const xxh_u8 *input, + size_t len, + const xxh_u8 *secret, + XXH64_hash_t seed) { + + XXH_ASSERT(input != NULL); + XXH_ASSERT(secret != NULL); + XXH_ASSERT(9 <= len && len <= 16); + { + + xxh_u64 const bitflipl = + (XXH_readLE64(secret + 32) ^ XXH_readLE64(secret + 40)) - seed; + xxh_u64 const bitfliph = + (XXH_readLE64(secret + 48) ^ XXH_readLE64(secret + 56)) + seed; + xxh_u64 const input_lo = XXH_readLE64(input); + xxh_u64 input_hi = XXH_readLE64(input + len - 8); + XXH128_hash_t m128 = + XXH_mult64to128(input_lo ^ input_hi ^ bitflipl, XXH_PRIME64_1); + /* + * Put len in the middle of m128 to ensure that the length gets mixed to + * both the low and high bits in the 128x64 multiply below. + */ + m128.low64 += (xxh_u64)(len - 1) << 54; + input_hi ^= bitfliph; + /* + * Add the high 32 bits of input_hi to the high 32 bits of m128, then + * add the long product of the low 32 bits of input_hi and XXH_PRIME32_2 to + * the high 64 bits of m128. + * + * The best approach to this operation is different on 32-bit and 64-bit. + */ + if (sizeof(void *) < sizeof(xxh_u64)) { /* 32-bit */ + /* + * 32-bit optimized version, which is more readable. + * + * On 32-bit, it removes an ADC and delays a dependency between the two + * halves of m128.high64, but it generates an extra mask on 64-bit. + */ + m128.high64 += (input_hi & 0xFFFFFFFF00000000ULL) + + XXH_mult32to64((xxh_u32)input_hi, XXH_PRIME32_2); + + } else { + + /* + * 64-bit optimized (albeit more confusing) version. + * + * Uses some properties of addition and multiplication to remove the mask: + * + * Let: + * a = input_hi.lo = (input_hi & 0x00000000FFFFFFFF) + * b = input_hi.hi = (input_hi & 0xFFFFFFFF00000000) + * c = XXH_PRIME32_2 + * + * a + (b * c) + * Inverse Property: x + y - x == y + * a + (b * (1 + c - 1)) + * Distributive Property: x * (y + z) == (x * y) + (x * z) + * a + (b * 1) + (b * (c - 1)) + * Identity Property: x * 1 == x + * a + b + (b * (c - 1)) + * + * Substitute a, b, and c: + * input_hi.hi + input_hi.lo + ((xxh_u64)input_hi.lo * (XXH_PRIME32_2 - + * 1)) + * + * Since input_hi.hi + input_hi.lo == input_hi, we get this: + * input_hi + ((xxh_u64)input_hi.lo * (XXH_PRIME32_2 - 1)) + */ + m128.high64 += + input_hi + XXH_mult32to64((xxh_u32)input_hi, XXH_PRIME32_2 - 1); + + } + + /* m128 ^= XXH_swap64(m128 >> 64); */ + m128.low64 ^= XXH_swap64(m128.high64); + + { /* 128x64 multiply: h128 = m128 * XXH_PRIME64_2; */ + XXH128_hash_t h128 = XXH_mult64to128(m128.low64, XXH_PRIME64_2); + h128.high64 += m128.high64 * XXH_PRIME64_2; + + h128.low64 = XXH3_avalanche(h128.low64); + h128.high64 = XXH3_avalanche(h128.high64); + return h128; + + } + + } + +} + +/* + * Assumption: `secret` size is >= XXH3_SECRET_SIZE_MIN + */ +XXH_FORCE_INLINE XXH128_hash_t XXH3_len_0to16_128b(const xxh_u8 *input, + size_t len, + const xxh_u8 *secret, + XXH64_hash_t seed) { + + XXH_ASSERT(len <= 16); + { + + if (len > 8) return XXH3_len_9to16_128b(input, len, secret, seed); + if (len >= 4) return XXH3_len_4to8_128b(input, len, secret, seed); + if (len) return XXH3_len_1to3_128b(input, len, secret, seed); + { + + XXH128_hash_t h128; + xxh_u64 const bitflipl = + XXH_readLE64(secret + 64) ^ XXH_readLE64(secret + 72); + xxh_u64 const bitfliph = + XXH_readLE64(secret + 80) ^ XXH_readLE64(secret + 88); + h128.low64 = XXH64_avalanche(seed ^ bitflipl); + h128.high64 = XXH64_avalanche(seed ^ bitfliph); + return h128; + + } + + } + +} + +/* + * A bit slower than XXH3_mix16B, but handles multiply by zero better. + */ +XXH_FORCE_INLINE XXH128_hash_t XXH128_mix32B(XXH128_hash_t acc, + const xxh_u8 *input_1, + const xxh_u8 *input_2, + const xxh_u8 *secret, + XXH64_hash_t seed) { + + acc.low64 += XXH3_mix16B(input_1, secret + 0, seed); + acc.low64 ^= XXH_readLE64(input_2) + XXH_readLE64(input_2 + 8); + acc.high64 += XXH3_mix16B(input_2, secret + 16, seed); + acc.high64 ^= XXH_readLE64(input_1) + XXH_readLE64(input_1 + 8); + return acc; + +} + +XXH_FORCE_INLINE XXH128_hash_t XXH3_len_17to128_128b( + const xxh_u8 *XXH_RESTRICT input, size_t len, + const xxh_u8 *XXH_RESTRICT secret, size_t secretSize, XXH64_hash_t seed) { + + XXH_ASSERT(secretSize >= XXH3_SECRET_SIZE_MIN); + (void)secretSize; + XXH_ASSERT(16 < len && len <= 128); + + { + + XXH128_hash_t acc; + acc.low64 = len * XXH_PRIME64_1; + acc.high64 = 0; + if (len > 32) { + + if (len > 64) { + + if (len > 96) { + + acc = XXH128_mix32B(acc, input + 48, input + len - 64, secret + 96, + seed); + + } + + acc = + XXH128_mix32B(acc, input + 32, input + len - 48, secret + 64, seed); + + } + + acc = XXH128_mix32B(acc, input + 16, input + len - 32, secret + 32, seed); + + } + + acc = XXH128_mix32B(acc, input, input + len - 16, secret, seed); + { + + XXH128_hash_t h128; + h128.low64 = acc.low64 + acc.high64; + h128.high64 = (acc.low64 * XXH_PRIME64_1) + (acc.high64 * XXH_PRIME64_4) + + ((len - seed) * XXH_PRIME64_2); + h128.low64 = XXH3_avalanche(h128.low64); + h128.high64 = (XXH64_hash_t)0 - XXH3_avalanche(h128.high64); + return h128; + + } + + } + +} + +XXH_NO_INLINE XXH128_hash_t XXH3_len_129to240_128b( + const xxh_u8 *XXH_RESTRICT input, size_t len, + const xxh_u8 *XXH_RESTRICT secret, size_t secretSize, XXH64_hash_t seed) { + + XXH_ASSERT(secretSize >= XXH3_SECRET_SIZE_MIN); + (void)secretSize; + XXH_ASSERT(128 < len && len <= XXH3_MIDSIZE_MAX); + + { + + XXH128_hash_t acc; + int const nbRounds = (int)len / 32; + int i; + acc.low64 = len * XXH_PRIME64_1; + acc.high64 = 0; + for (i = 0; i < 4; i++) { + + acc = XXH128_mix32B(acc, input + (32 * i), input + (32 * i) + 16, + secret + (32 * i), seed); + + } + + acc.low64 = XXH3_avalanche(acc.low64); + acc.high64 = XXH3_avalanche(acc.high64); + XXH_ASSERT(nbRounds >= 4); + for (i = 4; i < nbRounds; i++) { + + acc = XXH128_mix32B(acc, input + (32 * i), input + (32 * i) + 16, + secret + XXH3_MIDSIZE_STARTOFFSET + (32 * (i - 4)), + seed); + + } + + /* last bytes */ + acc = XXH128_mix32B( + acc, input + len - 16, input + len - 32, + secret + XXH3_SECRET_SIZE_MIN - XXH3_MIDSIZE_LASTOFFSET - 16, + 0ULL - seed); + + { + + XXH128_hash_t h128; + h128.low64 = acc.low64 + acc.high64; + h128.high64 = (acc.low64 * XXH_PRIME64_1) + (acc.high64 * XXH_PRIME64_4) + + ((len - seed) * XXH_PRIME64_2); + h128.low64 = XXH3_avalanche(h128.low64); + h128.high64 = (XXH64_hash_t)0 - XXH3_avalanche(h128.high64); + return h128; + + } + + } + +} + +XXH_FORCE_INLINE XXH128_hash_t XXH3_hashLong_128b_internal( + const void *XXH_RESTRICT input, size_t len, + const xxh_u8 *XXH_RESTRICT secret, size_t secretSize, + XXH3_f_accumulate_512 f_acc512, XXH3_f_scrambleAcc f_scramble) { + + XXH_ALIGN(XXH_ACC_ALIGN) xxh_u64 acc[XXH_ACC_NB] = XXH3_INIT_ACC; + + XXH3_hashLong_internal_loop(acc, (const xxh_u8 *)input, len, secret, + secretSize, f_acc512, f_scramble); + + /* converge into final hash */ + XXH_STATIC_ASSERT(sizeof(acc) == 64); + XXH_ASSERT(secretSize >= sizeof(acc) + XXH_SECRET_MERGEACCS_START); + { + + XXH128_hash_t h128; + h128.low64 = XXH3_mergeAccs(acc, secret + XXH_SECRET_MERGEACCS_START, + (xxh_u64)len * XXH_PRIME64_1); + h128.high64 = XXH3_mergeAccs( + acc, secret + secretSize - sizeof(acc) - XXH_SECRET_MERGEACCS_START, + ~((xxh_u64)len * XXH_PRIME64_2)); + return h128; + + } + +} + +/* + * It's important for performance that XXH3_hashLong is not inlined. + */ +XXH_NO_INLINE XXH128_hash_t XXH3_hashLong_128b_default( + const void *XXH_RESTRICT input, size_t len, XXH64_hash_t seed64, + const void *XXH_RESTRICT secret, size_t secretLen) { + + (void)seed64; + (void)secret; + (void)secretLen; + return XXH3_hashLong_128b_internal(input, len, XXH3_kSecret, + sizeof(XXH3_kSecret), XXH3_accumulate_512, + XXH3_scrambleAcc); + +} + +/* + * It's important for performance that XXH3_hashLong is not inlined. + */ +XXH_NO_INLINE XXH128_hash_t XXH3_hashLong_128b_withSecret( + const void *XXH_RESTRICT input, size_t len, XXH64_hash_t seed64, + const void *XXH_RESTRICT secret, size_t secretLen) { + + (void)seed64; + return XXH3_hashLong_128b_internal(input, len, (const xxh_u8 *)secret, + secretLen, XXH3_accumulate_512, + XXH3_scrambleAcc); + +} + +XXH_FORCE_INLINE XXH128_hash_t XXH3_hashLong_128b_withSeed_internal( + const void *XXH_RESTRICT input, size_t len, XXH64_hash_t seed64, + XXH3_f_accumulate_512 f_acc512, XXH3_f_scrambleAcc f_scramble, + XXH3_f_initCustomSecret f_initSec) { + + if (seed64 == 0) + return XXH3_hashLong_128b_internal( + input, len, XXH3_kSecret, sizeof(XXH3_kSecret), f_acc512, f_scramble); + { + + XXH_ALIGN(XXH_SEC_ALIGN) xxh_u8 secret[XXH_SECRET_DEFAULT_SIZE]; + f_initSec(secret, seed64); + return XXH3_hashLong_128b_internal(input, len, (const xxh_u8 *)secret, + sizeof(secret), f_acc512, f_scramble); + + } + +} + +/* + * It's important for performance that XXH3_hashLong is not inlined. + */ +XXH_NO_INLINE XXH128_hash_t +XXH3_hashLong_128b_withSeed(const void *input, size_t len, XXH64_hash_t seed64, + const void *XXH_RESTRICT secret, size_t secretLen) { + + (void)secret; + (void)secretLen; + return XXH3_hashLong_128b_withSeed_internal( + input, len, seed64, XXH3_accumulate_512, XXH3_scrambleAcc, + XXH3_initCustomSecret); + +} + +typedef XXH128_hash_t (*XXH3_hashLong128_f)(const void *XXH_RESTRICT, size_t, + XXH64_hash_t, + const void *XXH_RESTRICT, size_t); + +XXH_FORCE_INLINE XXH128_hash_t +XXH3_128bits_internal(const void *input, size_t len, XXH64_hash_t seed64, + const void *XXH_RESTRICT secret, size_t secretLen, + XXH3_hashLong128_f f_hl128) { + + XXH_ASSERT(secretLen >= XXH3_SECRET_SIZE_MIN); + /* + * If an action is to be taken if `secret` conditions are not respected, + * it should be done here. + * For now, it's a contract pre-condition. + * Adding a check and a branch here would cost performance at every hash. + */ + if (len <= 16) + return XXH3_len_0to16_128b((const xxh_u8 *)input, len, + (const xxh_u8 *)secret, seed64); + if (len <= 128) + return XXH3_len_17to128_128b((const xxh_u8 *)input, len, + (const xxh_u8 *)secret, secretLen, seed64); + if (len <= XXH3_MIDSIZE_MAX) + return XXH3_len_129to240_128b((const xxh_u8 *)input, len, + (const xxh_u8 *)secret, secretLen, seed64); + return f_hl128(input, len, seed64, secret, secretLen); + +} + +/* === Public XXH128 API === */ + +XXH_PUBLIC_API XXH128_hash_t XXH3_128bits(const void *input, size_t len) { + + return XXH3_128bits_internal(input, len, 0, XXH3_kSecret, + sizeof(XXH3_kSecret), + XXH3_hashLong_128b_default); + +} + +XXH_PUBLIC_API XXH128_hash_t XXH3_128bits_withSecret(const void *input, + size_t len, + const void *secret, + size_t secretSize) { + + return XXH3_128bits_internal(input, len, 0, (const xxh_u8 *)secret, + secretSize, XXH3_hashLong_128b_withSecret); + +} + +XXH_PUBLIC_API XXH128_hash_t XXH3_128bits_withSeed(const void * input, + size_t len, + XXH64_hash_t seed) { + + return XXH3_128bits_internal(input, len, seed, XXH3_kSecret, + sizeof(XXH3_kSecret), + XXH3_hashLong_128b_withSeed); + +} + +XXH_PUBLIC_API XXH128_hash_t XXH128(const void *input, size_t len, + XXH64_hash_t seed) { + + return XXH3_128bits_withSeed(input, len, seed); + +} + +/* === XXH3 128-bit streaming === */ + +/* + * All the functions are actually the same as for 64-bit streaming variant. + * The only difference is the finalizatiom routine. + */ + +static void XXH3_128bits_reset_internal(XXH3_state_t *statePtr, + XXH64_hash_t seed, const void *secret, + size_t secretSize) { + + XXH3_64bits_reset_internal(statePtr, seed, secret, secretSize); + +} + +XXH_PUBLIC_API XXH_errorcode XXH3_128bits_reset(XXH3_state_t *statePtr) { + + if (statePtr == NULL) return XXH_ERROR; + XXH3_128bits_reset_internal(statePtr, 0, XXH3_kSecret, + XXH_SECRET_DEFAULT_SIZE); + return XXH_OK; + +} + +XXH_PUBLIC_API XXH_errorcode XXH3_128bits_reset_withSecret( + XXH3_state_t *statePtr, const void *secret, size_t secretSize) { + + if (statePtr == NULL) return XXH_ERROR; + XXH3_128bits_reset_internal(statePtr, 0, secret, secretSize); + if (secret == NULL) return XXH_ERROR; + if (secretSize < XXH3_SECRET_SIZE_MIN) return XXH_ERROR; + return XXH_OK; + +} + +XXH_PUBLIC_API XXH_errorcode XXH3_128bits_reset_withSeed(XXH3_state_t *statePtr, + XXH64_hash_t seed) { + + if (statePtr == NULL) return XXH_ERROR; + if (seed == 0) return XXH3_128bits_reset(statePtr); + if (seed != statePtr->seed) + XXH3_initCustomSecret(statePtr->customSecret, seed); + XXH3_128bits_reset_internal(statePtr, seed, NULL, XXH_SECRET_DEFAULT_SIZE); + return XXH_OK; + +} + +XXH_PUBLIC_API XXH_errorcode XXH3_128bits_update(XXH3_state_t *state, + const void * input, + size_t len) { + + return XXH3_update(state, (const xxh_u8 *)input, len, XXH3_accumulate_512, + XXH3_scrambleAcc); + +} + +XXH_PUBLIC_API XXH128_hash_t XXH3_128bits_digest(const XXH3_state_t *state) { + + const unsigned char *const secret = + (state->extSecret == NULL) ? state->customSecret : state->extSecret; + if (state->totalLen > XXH3_MIDSIZE_MAX) { + + XXH_ALIGN(XXH_ACC_ALIGN) XXH64_hash_t acc[XXH_ACC_NB]; + XXH3_digest_long(acc, state, secret); + XXH_ASSERT(state->secretLimit + XXH_STRIPE_LEN >= + sizeof(acc) + XXH_SECRET_MERGEACCS_START); + { + + XXH128_hash_t h128; + h128.low64 = XXH3_mergeAccs(acc, secret + XXH_SECRET_MERGEACCS_START, + (xxh_u64)state->totalLen * XXH_PRIME64_1); + h128.high64 = + XXH3_mergeAccs(acc, + secret + state->secretLimit + XXH_STRIPE_LEN - + sizeof(acc) - XXH_SECRET_MERGEACCS_START, + ~((xxh_u64)state->totalLen * XXH_PRIME64_2)); + return h128; + + } + + } + + /* len <= XXH3_MIDSIZE_MAX : short code */ + if (state->seed) + return XXH3_128bits_withSeed(state->buffer, (size_t)state->totalLen, + state->seed); + return XXH3_128bits_withSecret(state->buffer, (size_t)(state->totalLen), + secret, state->secretLimit + XXH_STRIPE_LEN); + +} + + /* 128-bit utility functions */ + + #include <string.h> /* memcmp, memcpy */ + +/* return : 1 is equal, 0 if different */ +XXH_PUBLIC_API int XXH128_isEqual(XXH128_hash_t h1, XXH128_hash_t h2) { + + /* note : XXH128_hash_t is compact, it has no padding byte */ + return !(memcmp(&h1, &h2, sizeof(h1))); + +} + +/* This prototype is compatible with stdlib's qsort(). + * return : >0 if *h128_1 > *h128_2 + * <0 if *h128_1 < *h128_2 + * =0 if *h128_1 == *h128_2 */ +XXH_PUBLIC_API int XXH128_cmp(const void *h128_1, const void *h128_2) { + + XXH128_hash_t const h1 = *(const XXH128_hash_t *)h128_1; + XXH128_hash_t const h2 = *(const XXH128_hash_t *)h128_2; + int const hcmp = (h1.high64 > h2.high64) - (h2.high64 > h1.high64); + /* note : bets that, in most cases, hash values are different */ + if (hcmp) return hcmp; + return (h1.low64 > h2.low64) - (h2.low64 > h1.low64); + +} + +/*====== Canonical representation ======*/ +XXH_PUBLIC_API void XXH128_canonicalFromHash(XXH128_canonical_t *dst, + XXH128_hash_t hash) { + + XXH_STATIC_ASSERT(sizeof(XXH128_canonical_t) == sizeof(XXH128_hash_t)); + if (XXH_CPU_LITTLE_ENDIAN) { + + hash.high64 = XXH_swap64(hash.high64); + hash.low64 = XXH_swap64(hash.low64); + + } + + memcpy(dst, &hash.high64, sizeof(hash.high64)); + memcpy((char *)dst + sizeof(hash.high64), &hash.low64, sizeof(hash.low64)); + +} + +XXH_PUBLIC_API XXH128_hash_t +XXH128_hashFromCanonical(const XXH128_canonical_t *src) { + + XXH128_hash_t h; + h.high64 = XXH_readBE64(src); + h.low64 = XXH_readBE64(src->digest + 8); + return h; + +} + + /* Pop our optimization override from above */ + #if XXH_VECTOR == XXH_AVX2 /* AVX2 */ \ + && defined(__GNUC__) && !defined(__clang__) /* GCC, not Clang */ \ + && defined(__OPTIMIZE__) && \ + !defined(__OPTIMIZE_SIZE__) /* respect -O0 and -Os */ + #pragma GCC pop_options + #endif #endif /* XXH_NO_LONG_LONG */ |