diff options
Diffstat (limited to 'nix')
| -rw-r--r-- | nix/.config/alacritty.yml | 439 | ||||
| -rw-r--r-- | nix/.config/gtk-3.0/bookmarks | 1 | ||||
| -rw-r--r-- | nix/.config/gtk-3.0/settings.ini | 12 | ||||
| l--------- | nix/.config/systemd/user/default.target.wants/emacs.service | 1 | ||||
| l--------- | nix/.config/systemd/user/default.target.wants/ipfs.service | 1 | ||||
| -rw-r--r-- | nix/.config/systemd/user/emacs.service | 15 | ||||
| -rw-r--r-- | nix/.config/systemd/user/ipfs.service | 10 | ||||
| -rw-r--r-- | nix/.dictrc | 2 | ||||
| -rw-r--r-- | nix/.gtkrc-2.0 | 3 | ||||
| -rw-r--r-- | nix/configuration.nix | 128 |
10 files changed, 0 insertions, 612 deletions
diff --git a/nix/.config/alacritty.yml b/nix/.config/alacritty.yml deleted file mode 100644 index 51c51fe..0000000 --- a/nix/.config/alacritty.yml +++ /dev/null @@ -1,439 +0,0 @@ -# Configuration for Alacritty, the GPU enhanced terminal emulator. - -# Any items in the `env` entry below will be added as -# environment variables. Some entries may override variables -# set by alacritty itself. -#env: - # TERM variable - # - # This value is used to set the `$TERM` environment variable for - # each instance of Alacritty. If it is not present, alacritty will - # check the local terminfo database and use `alacritty` if it is - # available, otherwise `xterm-256color` is used. - #TERM: xterm-256color - -window: - dimensions: - columns: 80 - lines: 24 - - # Window position (changes require restart) - # - # Specified in number of pixels. - # If the position is not set, the window manager will handle the placement. - #position: - # x: 0 - # y: 0 - - # Window padding (changes require restart) - # - # Blank space added around the window in pixels. This padding is scaled - # by DPI and the specified value is always added at both opposing sides. - #padding: - # x: 0 - # y: 0 - - # Spread additional padding evenly around the terminal content. - dynamic_padding: true - - # Window decorations - # - # Values for `decorations`: - # - full: Borders and title bar - # - none: Neither borders nor title bar - # - # Values for `decorations` (macOS only): - # - transparent: Title bar, transparent background and title bar buttons - # - buttonless: Title bar, transparent background, but no title bar buttons - #decorations: full - - # Startup Mode (changes require restart) - # - # Values for `startup_mode`: - # - Windowed - # - Maximized - # - Fullscreen - # - # Values for `startup_mode` (macOS only): - # - SimpleFullscreen - #startup_mode: Windowed - - # Window title - #title: Alacritty - - # Window class (Linux only): - #class: - # Application instance name - #instance: Alacritty - # General application class - #general: Alacritty - - # GTK theme variant (Linux only) - # - # Override the variant of the GTK theme. Commonly supported values are `dark` and `light`. - # Set this to `None` to use the default theme variant. - #gtk_theme_variant: None - -#scrolling: - # Maximum number of lines in the scrollback buffer. - # Specifying '0' will disable scrolling. - #history: 10000 - - # Number of lines the viewport will move for every line scrolled when - # scrollback is enabled (history > 0). - #multiplier: 3 - - # Scroll to the bottom when new text is written to the terminal. - #auto_scroll: false - -# Spaces per Tab (changes require restart) -# -# This setting defines the width of a tab in cells. -# -# Some applications, like Emacs, rely on knowing about the width of a tab. -# To prevent unexpected behavior in these applications, it's also required to -# change the `it` value in terminfo when altering this setting. -#tabspaces: 8 - -# Font configuration -font: - normal: - family: Latin Modern Mono - size: 12.0 - -# If `true`, bold text is drawn using the bright color variants. -#draw_bold_text_with_bright_colors: true - -# Colors (Papercolor light) -colors: - # Default colors - primary: - background: '0xf6f5f4' - foreground: '0x303739' - - # Normal colors - normal: - black: '0xf6f5f4' - red: '0xd7005f' - green: '0x718c00' - yellow: '0xd75f00' - blue: '0x4271ae' - magenta: '0x8959a8' - cyan: '0x3e999f' - white: '0x4d4d4c' - - # Bright colors - bright: - black: '0x969694' - red: '0xd7005f' - green: '0x718c00' - yellow: '0xd75f00' - blue: '0x4271ae' - magenta: '0x8959a8' - cyan: '0x3e999f' - white: '0x303739' - -# Visual Bell -# -# Any time the BEL code is received, Alacritty "rings" the visual bell. Once -# rung, the terminal background will be set to white and transition back to the -# default background color. You can control the rate of this transition by -# setting the `duration` property (represented in milliseconds). You can also -# configure the transition function by setting the `animation` property. -# -# Values for `animation`: -# - Ease -# - EaseOut -# - EaseOutSine -# - EaseOutQuad -# - EaseOutCubic -# - EaseOutQuart -# - EaseOutQuint -# - EaseOutExpo -# - EaseOutCirc -# - Linear -# -# Specifying a `duration` of `0` will disable the visual bell. -#visual_bell: -# animation: EaseOutExpo -# duration: 0 -# color: '0xffffff' - -# Background opacity -# -# Window opacity as a floating point number from `0.0` to `1.0`. -# The value `0.0` is completely transparent and `1.0` is opaque. -#background_opacity: 1.0 - -#selection: - #semantic_escape_chars: ",│`|:\"' ()[]{}<>\t" - - # When set to `true`, selected text will be copied to the primary clipboard. - #save_to_clipboard: false - -# Allow terminal applications to change Alacritty's window title. -#dynamic_title: true - -#cursor: - # Cursor style - # - # Values for `style`: - # - ▇ Block - # - _ Underline - # - | Beam - #style: Block - - # If this is `true`, the cursor will be rendered as a hollow box when the - # window is not focused. - #unfocused_hollow: true - -# Live config reload (changes require restart) -#live_config_reload: true - -# Shell -# -# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`. -# Entries in `shell.args` are passed unmodified as arguments to the shell. -# -# Default: -# - (macOS) /bin/bash --login -# - (Linux) user login shell -# - (Windows) powershell -#shell: -# program: /bin/bash -# args: -# - --login - -# Startup directory -# -# Directory the shell is started in. If this is unset, or `None`, the working -# directory of the parent process will be used. -#working_directory: None - -# Windows 10 ConPTY backend (Windows only) -# -# This will enable better color support and may resolve other issues, -# however this API and its implementation is still young and so is -# disabled by default, as stability may not be as good as the winpty -# backend. -# -# Alacritty will fall back to the WinPTY automatically if the ConPTY -# backend cannot be initialized. -#enable_experimental_conpty_backend: false - -# Send ESC (\x1b) before characters when alt is pressed. -#alt_send_esc: true - -#debug: - # Display the time it takes to redraw each frame. - #render_timer: false - - # Keep the log file after quitting Alacritty. - #persistent_logging: false - - # Log level - # - # Values for `log_level`: - # - None - # - Error - # - Warn - # - Info - # - Debug - # - Trace - #log_level: Warn - - # Print all received window events. - #print_events: false - - # Record all characters and escape sequences as test data. - #ref_test: false - -#mouse: - # Click settings - # - # The `double_click` and `triple_click` settings control the time - # alacritty should wait for accepting multiple clicks as one double - # or triple click. - #double_click: { threshold: 300 } - #triple_click: { threshold: 300 } - - # If this is `true`, the cursor is temporarily hidden when typing. - #hide_when_typing: false - - #url: - # URL launcher - # - # This program is executed when clicking on a text which is recognized as a URL. - # The URL is always added to the command as the last parameter. - # - # When set to `None`, URL launching will be disabled completely. - # - # Default: - # - (macOS) open - # - (Linux) xdg-open - # - (Windows) explorer - #launcher: - # program: xdg-open - # args: [] - - # URL modifiers - # - # These are the modifiers that need to be held down for opening URLs when clicking - # on them. The available modifiers are documented in the key binding section. - #modifiers: None - -# Mouse bindings -# -# Mouse bindings are specified as a list of objects, much like the key -# bindings further below. -# -# Each mouse binding will specify a: -# -# - `mouse`: -# -# - Middle -# - Left -# - Right -# - Numeric identifier such as `5` -# -# - `action` (see key bindings) -# -# And optionally: -# -# - `mods` (see key bindings) -#mouse_bindings: -# - { mouse: Middle, action: PasteSelection } - -# Key bindings -# -# Key bindings are specified as a list of objects. For example, this is the -# default paste binding: -# -# `- { key: V, mods: Control|Shift, action: Paste }` -# -# Each key binding will specify a: -# -# - `key`: Identifier of the key pressed -# -# - A-Z -# - F1-F24 -# - Key0-Key9 -# -# A full list with available key codes can be found here: -# https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants -# -# Instead of using the name of the keys, the `key` field also supports using -# the scancode of the desired key. Scancodes have to be specified as a -# decimal number. This command will allow you to display the hex scancodes -# for certain keys: -# -# `showkey --scancodes`. -# -# Then exactly one of: -# -# - `chars`: Send a byte sequence to the running application -# -# The `chars` field writes the specified string to the terminal. This makes -# it possible to pass escape sequences. To find escape codes for bindings -# like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside -# of tmux. Note that applications use terminfo to map escape sequences back -# to keys. It is therefore required to update the terminfo when changing an -# escape sequence. -# -# - `action`: Execute a predefined action -# -# - Copy -# - Paste -# - PasteSelection -# - IncreaseFontSize -# - DecreaseFontSize -# - ResetFontSize -# - ScrollPageUp -# - ScrollPageDown -# - ScrollLineUp -# - ScrollLineDown -# - ScrollToTop -# - ScrollToBottom -# - ClearHistory -# - Hide -# - Quit -# - ToggleFullscreen -# - SpawnNewInstance -# - ClearLogNotice -# - ReceiveChar -# - None -# -# (macOS only): -# - ToggleSimpleFullscreen: Enters fullscreen without occupying another space -# -# - `command`: Fork and execute a specified command plus arguments -# -# The `command` field must be a map containing a `program` string and an -# `args` array of command line parameter strings. For example: -# `{ program: "alacritty", args: ["-e", "vttest"] }` -# -# And optionally: -# -# - `mods`: Key modifiers to filter binding actions -# -# - Command -# - Control -# - Option -# - Super -# - Shift -# - Alt -# -# Multiple `mods` can be combined using `|` like this: -# `mods: Control|Shift`. -# Whitespace and capitalization are relevant and must match the example. -# -# - `mode`: Indicate a binding for only specific terminal reported modes -# -# This is mainly used to send applications the correct escape sequences -# when in different modes. -# -# - AppCursor -# - AppKeypad -# - Alt -# -# A `~` operator can be used before a mode to apply the binding whenever -# the mode is *not* active, e.g. `~Alt`. -# -# Bindings are always filled by default, but will be replaced when a new -# binding with the same triggers is defined. To unset a default binding, it can -# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for -# a no-op if you do not wish to receive input characters for that binding. -#key_bindings: - # (Windows/Linux only) - #- { key: V, mods: Control|Shift, action: Paste } - #- { key: C, mods: Control|Shift, action: Copy } - #- { key: Insert, mods: Shift, action: PasteSelection } - #- { key: Key0, mods: Control, action: ResetFontSize } - #- { key: Equals, mods: Control, action: IncreaseFontSize } - #- { key: Add, mods: Control, action: IncreaseFontSize } - #- { key: Subtract, mods: Control, action: DecreaseFontSize } - #- { key: Minus, mods: Control, action: DecreaseFontSize } - #- { key: Return, mods: Alt, action: ToggleFullscreen } - - # (macOS only) - #- { key: Key0, mods: Command, action: ResetFontSize } - #- { key: Equals, mods: Command, action: IncreaseFontSize } - #- { key: Add, mods: Command, action: IncreaseFontSize } - #- { key: Minus, mods: Command, action: DecreaseFontSize } - #- { key: K, mods: Command, action: ClearHistory } - #- { key: K, mods: Command, chars: "\x0c" } - #- { key: V, mods: Command, action: Paste } - #- { key: C, mods: Command, action: Copy } - #- { key: H, mods: Command, action: Hide } - #- { key: Q, mods: Command, action: Quit } - #- { key: W, mods: Command, action: Quit } - #- { key: F, mods: Command|Control, action: ToggleFullscreen } - - #- { key: Paste, action: Paste } - #- { key: Copy, action: Copy } - #- { key: L, mods: Control, action: ClearLogNotice } - #- { key: L, mods: Control, chars: "\x0c" } - #- { key: PageUp, mods: Shift, action: ScrollPageUp, mode: ~Alt } - #- { key: PageDown, mods: Shift, action: ScrollPageDown, mode: ~Alt } - #- { key: Home, mods: Shift, action: ScrollToTop, mode: ~Alt } - #- { key: End, mods: Shift, action: ScrollToBottom, mode: ~Alt } diff --git a/nix/.config/gtk-3.0/bookmarks b/nix/.config/gtk-3.0/bookmarks deleted file mode 100644 index 26d6f43..0000000 --- a/nix/.config/gtk-3.0/bookmarks +++ /dev/null @@ -1 +0,0 @@ -file:///home/cee/Salsa diff --git a/nix/.config/gtk-3.0/settings.ini b/nix/.config/gtk-3.0/settings.ini deleted file mode 100644 index ee90d17..0000000 --- a/nix/.config/gtk-3.0/settings.ini +++ /dev/null @@ -1,12 +0,0 @@ -[Settings] -gtk-application-prefer-dark-theme=0 -gtk-button-images=1 -gtk-cursor-theme-name=PearWhiteCursors -gtk-decoration-layout=close:icon -gtk-enable-animations=0 -gtk-font-name=LM Sans 10, 12 -gtk-icon-theme-name=breeze -gtk-key-theme-name=Emacs -gtk-menu-images=1 -gtk-primary-button-warps-slider=0 -gtk-toolbar-style=GTK_TOOLBAR_BOTH_HORIZ diff --git a/nix/.config/systemd/user/default.target.wants/emacs.service b/nix/.config/systemd/user/default.target.wants/emacs.service deleted file mode 120000 index bb810be..0000000 --- a/nix/.config/systemd/user/default.target.wants/emacs.service +++ /dev/null @@ -1 +0,0 @@ -/home/cee/.config/systemd/user/emacs.service \ No newline at end of file diff --git a/nix/.config/systemd/user/default.target.wants/ipfs.service b/nix/.config/systemd/user/default.target.wants/ipfs.service deleted file mode 120000 index 63ddeda..0000000 --- a/nix/.config/systemd/user/default.target.wants/ipfs.service +++ /dev/null @@ -1 +0,0 @@ -/home/cee/.config/systemd/user/ipfs.service \ No newline at end of file diff --git a/nix/.config/systemd/user/emacs.service b/nix/.config/systemd/user/emacs.service deleted file mode 100644 index d06a506..0000000 --- a/nix/.config/systemd/user/emacs.service +++ /dev/null @@ -1,15 +0,0 @@ -[Unit] -Description=Emacs: the extensible, self-documenting text editor - -[Service] -Environment="LOCALE_ARCHIVE=/nix/store/l4qnw7z34dv4kbn2wnckq0bdjlyzxrmx-glibc-locales-2.27/lib/locale/locale-archive" -Environment="PATH=/nix/store/j0lhk5xkky410h5v9af98sz6kd8cbp40-coreutils-8.31/bin:/nix/store/kmc865qs56czqk5k5vr0nj4zvfijlq7n-findutils-4.7.0/bin:/nix/store/20b535jb98hy7k4z8vkrlkjma212a3l5-gnugrep-3.3/bin:/nix/store/dv52knazq6pb1zv9pazzj666zg550zni-gnused-4.7/bin:/nix/store/jy856r03m1jk299wkk2zm3dan8gqj64s-systemd-243/bin:/nix/store/j0lhk5xkky410h5v9af98sz6kd8cbp40-coreutils-8.31/sbin:/nix/store/kmc865qs56czqk5k5vr0nj4zvfijlq7n-findutils-4.7.0/sbin:/nix/store/20b535jb98hy7k4z8vkrlkjma212a3l5-gnugrep-3.3/sbin:/nix/store/dv52knazq6pb1zv9pazzj666zg550zni-gnused-4.7/sbin:/nix/store/jy856r03m1jk299wkk2zm3dan8gqj64s-systemd-243/sbin" -Environment="TZDIR=/nix/store/27ils7qkz0rkhq02bq104gyj9s10vaf6-tzdata-2019b/share/zoneinfo" - -ExecStart=/nix/store/b34zjdmq5l8k6rwdykjx55yl9r9isl8k-bash-4.4-p23/bin/bash -c 'source /nix/store/j68zvm2dnkgmflcn128la1c51bpka127-set-environment; exec /nix/store/47jy4mm9262hx88k88b8acrlb9w86z9m-emacs-26.3/bin/emacs --daemon' -ExecStop=/nix/store/47jy4mm9262hx88k88b8acrlb9w86z9m-emacs-26.3/bin/emacsclient --eval (kill-emacs) -Restart=always -Type=forking - -[Install] -WantedBy=default.target diff --git a/nix/.config/systemd/user/ipfs.service b/nix/.config/systemd/user/ipfs.service deleted file mode 100644 index 673a093..0000000 --- a/nix/.config/systemd/user/ipfs.service +++ /dev/null @@ -1,10 +0,0 @@ -[Unit] -Description=IPFS daemon -After=network.target - -[Service] -ExecStart=/run/current-system/sw/bin/ipfs daemon -Restart=on-failure - -[Install] -WantedBy=default.target diff --git a/nix/.dictrc b/nix/.dictrc deleted file mode 100644 index 21701d9..0000000 --- a/nix/.dictrc +++ /dev/null @@ -1,2 +0,0 @@ -server 127.0.0.1 -server dict.org \ No newline at end of file diff --git a/nix/.gtkrc-2.0 b/nix/.gtkrc-2.0 deleted file mode 100644 index 7a29cb5..0000000 --- a/nix/.gtkrc-2.0 +++ /dev/null @@ -1,3 +0,0 @@ -gtk-font-name="Latin Modern Sans 12" -gtk-key-theme-name="Emacs" -gtk-modules=appmenu-gtk-module \ No newline at end of file diff --git a/nix/configuration.nix b/nix/configuration.nix deleted file mode 100644 index e001553..0000000 --- a/nix/configuration.nix +++ /dev/null @@ -1,128 +0,0 @@ -# Edit this configuration file to define what should be installed on -# your system. Help is available in the configuration.nix(5) man page -# and in the NixOS manual (accessible by running ‘nixos-help’). - -{ config, pkgs, ... }: - -{ - imports = - [ # Include the results of the hardware scan. - ./hardware-configuration.nix - ]; - - # Use the systemd-boot EFI boot loader. - boot.loader.systemd-boot.enable = true; - - networking.hostName = "nix"; # Define your hostname. - # Enables wireless support via wpa_supplicant. - # networking.wireless.enable = true; - - # The global useDHCP flag is deprecated, - # therefore explicitly set to false here. - # Per-interface useDHCP will be mandatory in the future, - # so this generated config replicates the default behaviour. - networking.useDHCP = false; - networking.interfaces.enp1s0.useDHCP = true; - networking.interfaces.wlp2s0.useDHCP = true; - - # Configure network proxy if necessary - # networking.proxy.default = "http://user:password@proxy:port/"; - # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain"; - - # Enable NetworkManager - networking.networkmanager.enable = true; - - # Select internationalisation properties. - i18n = { - defaultLocale = "en_US.UTF-8"; - inputMethod = { - enabled = "ibus"; - ibus.engines = with pkgs.ibus-engines; [ table table-others - typing-booster ]; - }; - }; - - console = { - font = "Lat2-Terminus16"; - keyMap = "us"; - }; - - # Set your time zone. - time.timeZone = "Asia/Ho_Chi_Minh"; - - # List packages installed in system profile. To search, run: - # $ nix search wget - environment.systemPackages = with pkgs; with kdeApplications; [ - ack htop mc stow zip - alacritty emacs git nix-prefetch-scripts pkg-config - alure2 libogg libsndfile libvorbis openal opusfile - aria2 curl firefox ipfs thunderbird w3m wget - ark ktorrent libreoffice okular spectacle - audaciousQt5 ffmpeg-full mpv zbar - azimuth duckmarines freedink gweled liquidwar lugaru tbe xonotic - blender frei0r glfw gmic-qt-krita kdenlive krita simplescreenrecorder - cmake gcc gdb man-pages posix_man_pages - dict dictdDBs.eng2fra dictdDBs.fra2eng dictdDBs.wiktionary dictdDBs.wordnet - efibootmgr refind - go guile jdk12 lua octave rakudo rlwrap sbcl - lmodern texlive.combined.scheme-full - (python38.withPackages(ps: with ps; [ - flake8 pip setuptools tox twine wheel - cython numpy moderngl pillow pygame ])) - ]; - - # Some programs need SUID wrappers, can be configured further or are - # started in user sessions. - programs.mtr.enable = true; - programs.gnupg.agent = { enable = true; enableSSHSupport = true; }; - - # List services that you want to enable: - services.dictd.enable = true; - services.dictd.DBs = with pkgs.dictdDBs; [ eng2fra fra2eng - wiktionary wordnet ]; - - # Emacs daemon - services.emacs.enable = false; - services.emacs.install = true; - services.emacs.defaultEditor = true; - - # Enable the OpenSSH daemon. - # services.openssh.enable = true; - - # Open ports in the firewall. - # networking.firewall.allowedTCPPorts = [ ... ]; - # networking.firewall.allowedUDPPorts = [ ... ]; - # Or disable the firewall altogether. - # networking.firewall.enable = false; - - # Enable CUPS to print documents. - services.printing.enable = true; - - # Enable sound. - sound.enable = true; - hardware.pulseaudio.enable = true; - - # Enable the X11 windowing system. - services.xserver.enable = true; - services.xserver.layout = "us"; - services.xserver.xkbOptions = "caps:ctrl_modifier,compose:ralt"; - - # Enable touchpad support. - services.xserver.libinput.enable = true; - - # Enable the KDE Desktop Environment. - services.xserver.displayManager.sddm.enable = true; - services.xserver.desktopManager.plasma5.enable = true; - - # Define a user account. Don't forget to set a password with ‘passwd’. - users.users.cee = { - isNormalUser = true; - extraGroups = [ "wheel" "networkmanager" ]; - }; - - # This value determines the NixOS release with which your system is to be - # compatible, in order to avoid breaking some software such as database - # servers. You should change this only after NixOS release notes say you - # should. - system.stateVersion = "20.03"; # Did you read the comment? -} |