* Follow our own coding conventions.

3 files changed, 61 insertions, 65 deletions

diff --git a/doc/manual/builtins.xml b/doc/manual/builtins.xml
index c7ebcc9a33..ce68c45bf3 100644
--- a/doc/manual/builtins.xml
+++ b/doc/manual/builtins.xml
@@ -43,10 +43,10 @@ is also available as <function>builtins.derivation</function>.</para>
 
     <listitem><para>Return the names of the attributes in the
     attribute set <replaceable>attrs</replaceable> in a sorted list.
-    For instance, <literal>builtins.attrNames {y = 1; x =
-    "foo";}</literal> evaluates to <literal>["x" "y"]</literal>.
-    There is no built-in function <function>attrValues</function>, but
-    you can easily define it yourself:
+    For instance, <literal>builtins.attrNames { y = 1; x = "foo";
+    }</literal> evaluates to <literal>[ "x" "y" ]</literal>.  There is
+    no built-in function <function>attrValues</function>, but you can
+    easily define it yourself:
 
 <programlisting>
 attrValues = attrs: map (name: builtins.getAttr name attrs) (builtins.attrNames attrs);</programlisting>
@@ -442,10 +442,10 @@ x: x + 456</programlisting>
     Example:
 
 <programlisting>
-builtins.listToAttrs [
-  {name = "foo"; value = 123;}
-  {name = "bar"; value = 456;}
-]
+builtins.listToAttrs
+  [ { name = "foo"; value = 123; }
+    { name = "bar"; value = 456; }
+  ]
 </programlisting>
 
     evaluates to
@@ -466,10 +466,10 @@ builtins.listToAttrs [
     example,
 
 <programlisting>
-map (x: "foo" + x) ["bar" "bla" "abc"]</programlisting>
+map (x: "foo" + x) [ "bar" "bla" "abc" ]</programlisting>
 
-    evaluates to <literal>["foobar" "foobla"
-    "fooabc"]</literal>.</para></listitem>
+    evaluates to <literal>[ "foobar" "foobla" "fooabc"
+    ]</literal>.</para></listitem>
     
   </varlistentry>
 
@@ -491,10 +491,10 @@ map (x: "foo" + x) ["bar" "bla" "abc"]</programlisting>
     a package name and version.  The package name is everything up to
     but not including the first dash followed by a digit, and the
     version is everything following that dash.  The result is returned
-    in an attribute set <literal>{name, version}</literal>.  Thus,
+    in an attribute set <literal>{ name, version }</literal>.  Thus,
     <literal>builtins.parseDrvName "nix-0.12pre12876"</literal>
-    returns <literal>{name = "nix"; version =
-    "0.12pre12876";}</literal>.</para></listitem>
+    returns <literal>{ name = "nix"; version = "0.12pre12876";
+    }</literal>.</para></listitem>
 
   </varlistentry>
 
@@ -550,9 +550,9 @@ in config.someSetting</programlisting>
     exist in <replaceable>attrs</replaceable>. For instance,
 
 <screen>
-removeAttrs { x = 1; y = 2; z = 3; } ["a" "x" "z"]</screen>
+removeAttrs { x = 1; y = 2; z = 3; } [ "a" "x" "z" ]</screen>
 
-    evaluates to <literal>{y = 2;}</literal>.</para></listitem>
+    evaluates to <literal>{ y = 2; }</literal>.</para></listitem>
 
   </varlistentry>
 
@@ -632,7 +632,7 @@ removeAttrs { x = 1; y = 2; z = 3; } ["a" "x" "z"]</screen>
     linkend='ex-hello-builder' /> into one file:
 
 <programlisting>
-{stdenv, fetchurl, perl}:
+{ stdenv, fetchurl, perl }:
 
 stdenv.mkDerivation {
   name = "hello-2.1.1";
@@ -765,12 +765,12 @@ in foo</programlisting>
     using <function>toXML</function></title>
     
 <programlisting><![CDATA[
-{stdenv, fetchurl, libxslt, jira, uberwiki}:
+{ stdenv, fetchurl, libxslt, jira, uberwiki }:
 
 stdenv.mkDerivation (rec {
   name = "web-server";
 
-  buildInputs = [libxslt];
+  buildInputs = [ libxslt ];
   
   builder = builtins.toFile "builder.sh" "
     source $stdenv/setup
diff --git a/doc/manual/opt-common.xml b/doc/manual/opt-common.xml
index e86e4b4125..c36c6df410 100644
--- a/doc/manual/opt-common.xml
+++ b/doc/manual/opt-common.xml
@@ -264,8 +264,8 @@
   expression evaluator will automatically try to call functions that
   it encounters.  It can automatically call functions for which every
   argument has a <link linkend='ss-functions'>default value</link>
-  (e.g., <literal>{<replaceable>argName</replaceable> ?
-  <replaceable>defaultValue</replaceable>}:
+  (e.g., <literal>{ <replaceable>argName</replaceable> ?
+  <replaceable>defaultValue</replaceable> }:
   <replaceable>...</replaceable></literal>).  With
   <option>--arg</option>, you can also call functions that have
   arguments without a default value (or override a default value).
diff --git a/doc/manual/writing-nix-expressions.xml b/doc/manual/writing-nix-expressions.xml
index 58b5a1ed02..e16225433d 100644
--- a/doc/manual/writing-nix-expressions.xml
+++ b/doc/manual/writing-nix-expressions.xml
@@ -52,7 +52,7 @@ need to do three things:
 <example xml:id='ex-hello-nix'><title>Nix expression for GNU Hello
 (<filename>default.nix</filename>)</title>
 <programlisting>
-{stdenv, fetchurl, perl}: <co xml:id='ex-hello-nix-co-1' />
+{ stdenv, fetchurl, perl }: <co xml:id='ex-hello-nix-co-1' />
 
 stdenv.mkDerivation { <co xml:id='ex-hello-nix-co-2' />
   name = "hello-2.1.1"; <co xml:id='ex-hello-nix-co-3' />
@@ -92,8 +92,8 @@ the single Nix expression in that directory
     function that downloads files.  <varname>perl</varname> is the
     Perl interpreter.</para>
 
-    <para>Nix functions generally have the form <literal>{x, y, ...,
-    z}: e</literal> where <varname>x</varname>, <varname>y</varname>,
+    <para>Nix functions generally have the form <literal>{ x, y, ...,
+    z }: e</literal> where <varname>x</varname>, <varname>y</varname>,
     etc. are the names of the expected arguments, and where
     <replaceable>e</replaceable> is the body of the function.  So
     here, the entire remainder of the file is the body of the
@@ -114,10 +114,10 @@ the single Nix expression in that directory
     <emphasis>attributes</emphasis>.  An attribute set is just a list
     of key/value pairs where each value is an arbitrary Nix
     expression.  They take the general form
-    <literal>{<replaceable>name1</replaceable> =
+    <literal>{ <replaceable>name1</replaceable> =
     <replaceable>expr1</replaceable>; <replaceable>...</replaceable>
     <replaceable>nameN</replaceable> =
-    <replaceable>exprN</replaceable>;}</literal>.</para>
+    <replaceable>exprN</replaceable>; }</literal>.</para>
 
   </callout>
 
@@ -564,7 +564,7 @@ genericBuild <co xml:id='ex-hello-builder2-co-3' /></programlisting>
 expression, like this:
 
 <programlisting>
-  buildInputs = [perl];</programlisting>
+  buildInputs = [ perl ];</programlisting>
 
 The <varname>perl</varname> attribute can then be removed, and the
 builder becomes even shorter:
@@ -771,14 +771,14 @@ stdenv.mkDerivation {
 values between square brackets.  For example,
 
 <programlisting>
-[ 123 ./foo.nix "abc" (f {x=y;}) ]</programlisting>
+[ 123 ./foo.nix "abc" (f { x = y; }) ]</programlisting>
 
 defines a list of four elements, the last being the result of a call
 to the function <varname>f</varname>.  Note that function calls have
 to be enclosed in parentheses.  If they had been omitted, e.g.,
 
 <programlisting>
-[ 123 ./foo.nix "abc" f {x=y;} ]</programlisting>
+[ 123 ./foo.nix "abc" f { x = y; } ]</programlisting>
 
 the result would be a list of five elements, the fourth one being a
 function and the fifth being an attribute set.</para>
@@ -891,15 +891,12 @@ propagate attributes).  This can be shortened using the
 <literal>inherit</literal> keyword.  For instance,
 
 <programlisting>
-let
-  x = 123;
-in 
-  {
-    inherit x;
-    y = 456;
-  }</programlisting>
-
-evaluates to <literal>{x = 123; y = 456;}</literal>.  (Note that this
+let x = 123; in 
+{ inherit x;
+  y = 456;
+}</programlisting>
+
+evaluates to <literal>{ x = 123; y = 456; }</literal>.  (Note that this
 works because <varname>x</varname> is added to the lexical scope by
 the <literal>let</literal> construct.)  It is also possible to inherit
 attributes from another attribute set.  For instance, in this fragment
@@ -960,20 +957,20 @@ in if negate true then concat "foo" "bar" else ""</programlisting>
   arguments of a function); e.g.,
 
   <programlisting>
-map (concat "foo") ["bar" "bla" "abc"]</programlisting>
+map (concat "foo") [ "bar" "bla" "abc" ]</programlisting>
 
-  evaluates to <literal>["foobar" "foobla"
-  "fooabc"]</literal>.</para></listitem>
+  evaluates to <literal>[ "foobar" "foobla"
+  "fooabc" ]</literal>.</para></listitem>
 
   
   <listitem><para>An <emphasis>attribute set pattern</emphasis> of the
-  form <literal>{name1, name2, …, nameN}</literal>
+  form <literal>{ name1, name2, …, nameN }</literal>
   matches an attribute set containing the listed attributes, and binds
   the values of those attributes to variables in the function body.
   For example, the function
 
 <programlisting>
-{x, y, z}: z + y + x</programlisting>
+{ x, y, z }: z + y + x</programlisting>
 
   can only be called with a set containing exactly the attributes
   <varname>x</varname>, <varname>y</varname> and
@@ -982,7 +979,7 @@ map (concat "foo") ["bar" "bla" "abc"]</programlisting>
   (<literal>...</literal>): 
 
 <programlisting>
-{x, y, z, ...}: z + y + x</programlisting>
+{ x, y, z, ... }: z + y + x</programlisting>
 
   This works on any set that contains at least the three named
   attributes.</para>
@@ -995,7 +992,7 @@ map (concat "foo") ["bar" "bla" "abc"]</programlisting>
   <replaceable>e</replaceable> is an arbitrary expression.  For example,
 
 <programlisting>
-{x, y ? "foo", z ? "bar"}: z + y + x</programlisting>
+{ x, y ? "foo", z ? "bar" }: z + y + x</programlisting>
 
   specifies a function that only requires an attribute named
   <varname>x</varname>, but optionally accepts <varname>y</varname>
@@ -1007,11 +1004,11 @@ map (concat "foo") ["bar" "bla" "abc"]</programlisting>
   of the <literal>@</literal>-sign.  For example:
 
 <programlisting>
-args@{x, y, z, ...}: z + y + x + args.a</programlisting>
+args@{ x, y, z, ... }: z + y + x + args.a</programlisting>
 
   Here <varname>args</varname> is bound to the entire argument, which
-  is further matches against the pattern <literal>{x, y, z,
-  ...}</literal>.</para></listitem>
+  is further matches against the pattern <literal>{ x, y, z,
+  ... }</literal>.</para></listitem>
 
 
 </itemizedlist>
@@ -1020,8 +1017,8 @@ args@{x, y, z, ...}: z + y + x + args.a</programlisting>
 a name, you can bind them to an attribute, e.g.,
 
 <programlisting>
-let concat = {x, y}: x + y;
-in concat {x = "foo"; y = "bar";}</programlisting>
+let concat = { x, y }: x + y;
+in concat { x = "foo"; y = "bar"; }</programlisting>
 
 </para>
 
@@ -1142,7 +1139,7 @@ lexical scope of the expression <replaceable>e2</replaceable>.  For
 instance,
 
 <programlisting>
-let as = {x = "foo"; y = "bar";};
+let as = { x = "foo"; y = "bar"; };
 in with as; x + y</programlisting>
 
 evaluates to <literal>"foobar"</literal> since the
@@ -1480,21 +1477,20 @@ allowedReferences = [];
     references graph of their inputs.  The attribute is a list of
     inputs in the Nix store whose references graph the builder needs
     to know.  The value of this attribute should be a list of pairs
-    <literal>[<replaceable>name1</replaceable>
+    <literal>[ <replaceable>name1</replaceable>
     <replaceable>path1</replaceable> <replaceable>name2</replaceable>
-    <replaceable>path2</replaceable>
-    <replaceable>...</replaceable>]</literal>.  The references graph
-    of each <replaceable>pathN</replaceable> will be stored in a text
-    file <replaceable>nameN</replaceable> in the temporary build
-    directory.  The text files have the format used by
-    <command>nix-store --register-validity</command> (with the deriver
-    fields left empty).  For example, when the following derivation is
-    built:
+    <replaceable>path2</replaceable> <replaceable>...</replaceable>
+    ]</literal>.  The references graph of each
+    <replaceable>pathN</replaceable> will be stored in a text file
+    <replaceable>nameN</replaceable> in the temporary build directory.
+    The text files have the format used by <command>nix-store
+    --register-validity</command> (with the deriver fields left
+    empty).  For example, when the following derivation is built:
 
 <programlisting>
 derivation {
   ...
-  exportReferencesGraph = ["libfoo-graph" libfoo];
+  exportReferencesGraph = [ "libfoo-graph" libfoo ];
 };
 </programlisting>
 
@@ -1571,14 +1567,14 @@ fetchurl {
     <varname>fetchurl</varname>:
 
 <programlisting>
-{stdenv, curl}: # The <command>curl</command> program is used for downloading.
+{ stdenv, curl }: # The <command>curl</command> program is used for downloading.
 
-{url, md5}:
+{ url, md5 }:
 
 stdenv.mkDerivation {
   name = baseNameOf (toString url);
   builder = ./builder.sh;
-  buildInputs = [curl];
+  buildInputs = [ curl ];
 
   # This is a fixed-output derivation; the output must be a regular
   # file with MD5 hash <varname>md5</varname>.
@@ -1650,7 +1646,7 @@ stdenv.mkDerivation {
     Nixpkgs has the line
 
 <programlisting>
-impureEnvVars = ["http_proxy" "https_proxy" <replaceable>...</replaceable>];
+impureEnvVars = [ "http_proxy" "https_proxy" <replaceable>...</replaceable> ];
 </programlisting>
 
     to make it use the proxy server configuration specified by the