summary refs log tree commit diff
path: root/doc
diff options
context:
space:
mode:
authorLudovic Courtès <ludo@gnu.org>2019-09-07 18:21:01 +0200
committerLudovic Courtès <ludo@gnu.org>2019-09-07 18:42:08 +0200
commit8ba31e8bd1f780301a429bbd826aa26daad9e71c (patch)
treef73382013d2f5cff50bc167105075701a8912d30 /doc
parent7854bbeb3f88ad4747b0a4ca01021ef2741f7b4e (diff)
downloadguix-8ba31e8bd1f780301a429bbd826aa26daad9e71c.tar.gz
doc: Use @lisp instead of @example for Scheme snippets.
This is a followup to f8c143a7131d6f40f387f4cd2ad1fa78b5e2f429, which
allows syntax highlighting of @lisp snippets in the HTML output.

* doc/guix.texi, doc/contributing.texi: Use @lisp instead of @example
for all the Scheme snippets.
Diffstat (limited to 'doc')
-rw-r--r--doc/contributing.texi16
-rw-r--r--doc/guix.texi642
2 files changed, 329 insertions, 329 deletions
diff --git a/doc/contributing.texi b/doc/contributing.texi
index 59917193f1..655c8283e5 100644
--- a/doc/contributing.texi
+++ b/doc/contributing.texi
@@ -376,7 +376,7 @@ package and does not contain any version number.
 
 For instance, the versions 2.24.20 and 3.9.12 of GTK+ may be packaged as follows:
 
-@example
+@lisp
 (define-public gtk+
   (package
     (name "gtk+")
@@ -387,15 +387,15 @@ For instance, the versions 2.24.20 and 3.9.12 of GTK+ may be packaged as follows
     (name "gtk+")
     (version "2.24.20")
     ...))
-@end example
+@end lisp
 If we also wanted GTK+ 3.8.2, this would be packaged as
-@example
+@lisp
 (define-public gtk+-3.8
   (package
     (name "gtk+")
     (version "3.8.2")
     ...))
-@end example
+@end lisp
 
 @c See <https://lists.gnu.org/archive/html/guix-devel/2016-01/msg00425.html>,
 @c for a discussion of what follows.
@@ -432,7 +432,7 @@ kernel.)  It is best to use the full commit identifiers in
 @code{origin}s, though, to avoid ambiguities.  A typical package
 definition may look like this:
 
-@example
+@lisp
 (define my-package
   (let ((commit "c3f29bc928d5900971f65965feaae59e1272a3f7")
         (revision "1"))          ;Guix package revision
@@ -447,7 +447,7 @@ definition may look like this:
                 (file-name (git-file-name name version))))
       ;; @dots{}
       )))
-@end example
+@end lisp
 
 @node Synopses and Descriptions
 @subsection Synopses and Descriptions
@@ -825,12 +825,12 @@ recommend using the @code{qemu-binfmt-service-type} to emulate them.  In
 order to enable it, add the following service to the list of services in
 your @code{operating-system} configuration:
 
-@example
+@lisp
 (service qemu-binfmt-service-type
  (qemu-binfmt-configuration
    (platforms (lookup-qemu-platforms "arm" "aarch64" "mips64el"))
    (guix-support? #t)))
-@end example
+@end lisp
 
 Then reconfigure your system.
 
diff --git a/doc/guix.texi b/doc/guix.texi
index 6d6a09b36b..83f791d71d 100644
--- a/doc/guix.texi
+++ b/doc/guix.texi
@@ -1035,7 +1035,7 @@ build are copied back to the initial machine.
 
 The @file{/etc/guix/machines.scm} file typically looks like this:
 
-@example
+@lisp
 (list (build-machine
         (name "eightysix.example.org")
         (system "x86_64-linux")
@@ -1051,7 +1051,7 @@ The @file{/etc/guix/machines.scm} file typically looks like this:
         (private-key
          (string-append (getenv "HOME")
                         "/.ssh/identity-for-guix"))))
-@end example
+@end lisp
 
 @noindent
 In the example above we specify a list of two build machines, one for
@@ -2756,9 +2756,9 @@ Install the package that the code within @var{file} evaluates to.
 As an example, @var{file} might contain a definition like this
 (@pxref{Defining Packages}):
 
-@example
+@lisp
 @verbatiminclude package-hello.scm
-@end example
+@end lisp
 
 Developers may find it useful to include such a @file{guix.scm} file
 in the root of their project source tree that can be used to test
@@ -2814,7 +2814,7 @@ so on.
 of packages:
 
 @findex packages->manifest
-@example
+@lisp
 (use-package-modules guile emacs)
 
 (packages->manifest
@@ -2822,7 +2822,7 @@ of packages:
        guile-2.0
        ;; Use a specific package output.
        (list guile-2.0 "debug")))
-@end example
+@end lisp
 
 @findex specifications->manifest
 In this example we have to know which modules define the @code{emacs}
@@ -2832,10 +2832,10 @@ instead provide regular package specifications and let
 @code{specifications->manifest} look up the corresponding package
 objects, like this:
 
-@example
+@lisp
 (specifications->manifest
  '("emacs" "guile@@2.2" "guile@@2.2:debug"))
-@end example
+@end lisp
 
 @item --roll-back
 @cindex rolling back
@@ -4548,9 +4548,9 @@ within @var{file} evaluates to.
 As an example, @var{file} might contain a definition like this
 (@pxref{Defining Packages}):
 
-@example
+@lisp
 @verbatiminclude environment-gdb.scm
-@end example
+@end lisp
 
 @item --manifest=@var{file}
 @itemx -m @var{file}
@@ -5124,7 +5124,7 @@ The high-level interface to package definitions is implemented in the
 example, the package definition, or @dfn{recipe}, for the GNU Hello
 package looks like this:
 
-@example
+@lisp
 (define-module (gnu packages hello)
   #:use-module (guix packages)
   #:use-module (guix download)
@@ -5150,7 +5150,7 @@ package looks like this:
     (description "Guess what GNU Hello prints!")
     (home-page "https://www.gnu.org/software/hello/")
     (license gpl3+)))
-@end example
+@end lisp
 
 @noindent
 Without being a Scheme expert, the reader may have guessed the meaning
@@ -5331,7 +5331,7 @@ the name of a package and returns its new name after rewrite.
 @noindent
 Consider this example:
 
-@example
+@lisp
 (define libressl-instead-of-openssl
   ;; This is a procedure to replace OPENSSL by LIBRESSL,
   ;; recursively.
@@ -5339,7 +5339,7 @@ Consider this example:
 
 (define git-with-libressl
   (libressl-instead-of-openssl git))
-@end example
+@end lisp
 
 @noindent
 Here we first define a rewriting procedure that replaces @var{openssl}
@@ -5361,11 +5361,11 @@ replacement for that package.
 
 The example above could be rewritten this way:
 
-@example
+@lisp
 (define libressl-instead-of-openssl
   ;; Replace all the packages called "openssl" with LibreSSL.
   (package-input-rewriting/spec `(("openssl" . ,(const libressl)))))
-@end example
+@end lisp
 
 The key difference here is that, this time, packages are matched by spec and
 not by identity.  In other words, any package in the graph that is called
@@ -5431,11 +5431,11 @@ defaults to @code{"out"} (@pxref{Packages with Multiple Outputs}, for
 more on package outputs).  For example, the list below specifies three
 inputs:
 
-@example
+@lisp
 `(("libffi" ,libffi)
   ("libunistring" ,libunistring)
   ("glib:bin" ,glib "bin"))  ;the "bin" output of Glib
-@end example
+@end lisp
 
 @cindex cross compilation, package dependencies
 The distinction between @code{native-inputs} and @code{inputs} is
@@ -5516,7 +5516,7 @@ identifier resolves to the package being defined.
 The example below shows how to add a package as a native input of itself when
 cross-compiling:
 
-@example
+@lisp
 (package
   (name "guile")
   ;; ...
@@ -5526,7 +5526,7 @@ cross-compiling:
   (native-inputs (if (%current-target-system)
                      `(("self" ,this-package))
                      '())))
-@end example
+@end lisp
 
 It is an error to refer to @code{this-package} outside a package definition.
 @end deffn
@@ -5563,11 +5563,11 @@ clone the Git version control repository, and check out the revision
 specified in the @code{uri} field as a @code{git-reference} object; a
 @code{git-reference} looks like this:
 
-@example
+@lisp
 (git-reference
   (url "https://git.savannah.gnu.org/git/hello.git")
   (commit "v2.10"))
-@end example
+@end lisp
 @end table
 
 @item @code{sha256}
@@ -6779,7 +6779,7 @@ in a monad---values that carry this additional context---are called
 
 Consider this ``normal'' procedure:
 
-@example
+@lisp
 (define (sh-symlink store)
   ;; Return a derivation that symlinks the 'bash' executable.
   (let* ((drv (package-derivation store bash))
@@ -6787,19 +6787,19 @@ Consider this ``normal'' procedure:
          (sh  (string-append out "/bin/bash")))
     (build-expression->derivation store "sh"
                                   `(symlink ,sh %output))))
-@end example
+@end lisp
 
 Using @code{(guix monads)} and @code{(guix gexp)}, it may be rewritten
 as a monadic function:
 
-@example
+@lisp
 (define (sh-symlink)
   ;; Same, but return a monadic value.
   (mlet %store-monad ((drv (package->derivation bash)))
     (gexp->derivation "sh"
                       #~(symlink (string-append #$drv "/bin/bash")
                                  #$output))))
-@end example
+@end lisp
 
 There are several things to note in the second version: the @code{store}
 parameter is now implicit and is ``threaded'' in the calls to the
@@ -6811,12 +6811,12 @@ As it turns out, the call to @code{package->derivation} can even be
 omitted since it will take place implicitly, as we will see later
 (@pxref{G-Expressions}):
 
-@example
+@lisp
 (define (sh-symlink)
   (gexp->derivation "sh"
                     #~(symlink (string-append #$bash "/bin/bash")
                                #$output)))
-@end example
+@end lisp
 
 @c See
 @c <https://syntaxexclamation.wordpress.com/2014/06/26/escaping-continuations/>
@@ -6826,10 +6826,10 @@ said, ``you exit a monad like you exit a building on fire: by running''.
 So, to exit the monad and get the desired effect, one must use
 @code{run-with-store}:
 
-@example
+@lisp
 (run-with-store (open-connection) (sh-symlink))
 @result{} /gnu/store/...-sh-symlink
-@end example
+@end lisp
 
 Note that the @code{(guix monad-repl)} module extends the Guile REPL with
 new ``meta-commands'' to make it easier to deal with monadic procedures:
@@ -6878,7 +6878,7 @@ Guile.  Thus we use this somewhat cryptic symbol inherited from the
 Haskell language.}.  There can be one @var{mproc} or several of them, as
 in this example:
 
-@example
+@lisp
 (run-with-state
     (with-monad %state-monad
       (>>= (return 1)
@@ -6888,7 +6888,7 @@ in this example:
 
 @result{} 4
 @result{} some-state
-@end example
+@end lisp
 @end deffn
 
 @deffn {Scheme Syntax} mlet @var{monad} ((@var{var} @var{mval}) ...) @
@@ -6947,7 +6947,7 @@ Consider the example below.  The @code{square} procedure returns a value
 in the state monad.  It returns the square of its argument, but also
 increments the current state value:
 
-@example
+@lisp
 (define (square x)
   (mlet %state-monad ((count (current-state)))
     (mbegin %state-monad
@@ -6957,7 +6957,7 @@ increments the current state value:
 (run-with-state (sequence %state-monad (map square (iota 3))) 0)
 @result{} (0 1 4)
 @result{} 3
-@end example
+@end lisp
 
 When ``run'' through @var{%state-monad}, we obtain that additional state
 value, which is the number of @code{square} calls.
@@ -7032,14 +7032,14 @@ entries for which @var{select?} does not return true.
 
 The example below adds a file to the store, under two different names:
 
-@example
+@lisp
 (run-with-store (open-connection)
   (mlet %store-monad ((a (interned-file "README"))
                       (b (interned-file "README" "LEGU-MIN")))
     (return (list a b))))
 
 @result{} ("/gnu/store/rwm@dots{}-README" "/gnu/store/44i@dots{}-LEGU-MIN")
-@end example
+@end lisp
 
 @end deffn
 
@@ -7133,22 +7133,22 @@ below.)
 
 To illustrate the idea, here is an example of a gexp:
 
-@example
+@lisp
 (define build-exp
   #~(begin
       (mkdir #$output)
       (chdir #$output)
       (symlink (string-append #$coreutils "/bin/ls")
                "list-files")))
-@end example
+@end lisp
 
 This gexp can be passed to @code{gexp->derivation}; we obtain a
 derivation that builds a directory containing exactly one symlink to
 @file{/gnu/store/@dots{}-coreutils-8.22/bin/ls}:
 
-@example
+@lisp
 (gexp->derivation "the-thing" build-exp)
-@end example
+@end lisp
 
 As one would expect, the @code{"/gnu/store/@dots{}-coreutils-8.22"} string is
 substituted to the reference to the @var{coreutils} package in the
@@ -7164,7 +7164,7 @@ host---versus references to cross builds of a package.  To that end, the
 @code{#+} plays the same role as @code{#$}, but is a reference to a
 native package build:
 
-@example
+@lisp
 (gexp->derivation "vi"
    #~(begin
        (mkdir #$output)
@@ -7173,7 +7173,7 @@ native package build:
                 (string-append #$emacs "/bin/emacs")
                 (string-append #$output "/bin/vi")))
    #:target "mips64el-linux-gnu")
-@end example
+@end lisp
 
 @noindent
 In the example above, the native build of @var{coreutils} is used, so
@@ -7187,7 +7187,7 @@ able to use certain Guile modules from the ``host environment'' in the
 gexp, so those modules should be imported in the ``build environment''.
 The @code{with-imported-modules} form allows you to express that:
 
-@example
+@lisp
 (let ((build (with-imported-modules '((guix build utils))
                #~(begin
                    (use-modules (guix build utils))
@@ -7197,7 +7197,7 @@ The @code{with-imported-modules} form allows you to express that:
                         #$build
                         (display "success!\n")
                         #t)))
-@end example
+@end lisp
 
 @noindent
 In this example, the @code{(guix build utils)} module is automatically
@@ -7213,7 +7213,7 @@ because of missing dependent modules.  The @code{source-module-closure}
 procedure computes the closure of a module by looking at its source file
 headers, which comes in handy in this case:
 
-@example
+@lisp
 (use-modules (guix modules))   ;for 'source-module-closure'
 
 (with-imported-modules (source-module-closure
@@ -7224,7 +7224,7 @@ headers, which comes in handy in this case:
                         (use-modules (guix build utils)
                                      (gnu build vm))
                         @dots{})))
-@end example
+@end lisp
 
 @cindex extensions, for gexps
 @findex with-extensions
@@ -7233,7 +7233,7 @@ modules, but also ``extensions'' such as Guile bindings to C libraries
 or other ``full-blown'' packages.  Say you need the @code{guile-json}
 package available on the build side, here's how you would do it:
 
-@example
+@lisp
 (use-modules (gnu packages guile))  ;for 'guile-json'
 
 (with-extensions (list guile-json)
@@ -7241,7 +7241,7 @@ package available on the build side, here's how you would do it:
                     #~(begin
                         (use-modules (json))
                         @dots{})))
-@end example
+@end lisp
 
 The syntactic form to construct gexps is summarized below.
 
@@ -7310,12 +7310,12 @@ Each item in @var{modules} can be the name of a module, such as
 @code{(guix build utils)}, or it can be a module name, followed by an
 arrow, followed by a file-like object:
 
-@example
+@lisp
 `((guix build utils)
   (guix gcrypt)
   ((guix config) => ,(scheme-file "config.scm"
                                   #~(define-module @dots{}))))
-@end example
+@end lisp
 
 @noindent
 In the example above, the first two modules are taken from the search
@@ -7414,10 +7414,10 @@ The @code{local-file}, @code{plain-file}, @code{computed-file},
 @dfn{file-like objects}.  That is, when unquoted in a G-expression,
 these objects lead to a file in the store.  Consider this G-expression:
 
-@example
+@lisp
 #~(system* #$(file-append glibc "/sbin/nscd") "-f"
            #$(local-file "/tmp/my-nscd.conf"))
-@end example
+@end lisp
 
 The effect here is to ``intern'' @file{/tmp/my-nscd.conf} by copying it
 to the store.  Once expanded, for instance @i{via}
@@ -7473,13 +7473,13 @@ Look up @var{exp}'s modules in @var{module-path}.
 The example below builds a script that simply invokes the @command{ls}
 command:
 
-@example
+@lisp
 (use-modules (guix gexp) (gnu packages base))
 
 (gexp->script "list-files"
               #~(execl #$(file-append coreutils "/bin/ls")
                        "ls"))
-@end example
+@end lisp
 
 When ``running'' it through the store (@pxref{The Store Monad,
 @code{run-with-store}}), we obtain a derivation that produces an
@@ -7537,14 +7537,14 @@ to create will reference items from the store.  This is typically the
 case when building a configuration file that embeds store file names,
 like this:
 
-@example
+@lisp
 (define (profile.sh)
   ;; Return the name of a shell script in the store that
   ;; initializes the 'PATH' environment variable.
   (text-file* "profile.sh"
               "export PATH=" coreutils "/bin:"
               grep "/bin:" sed "/bin\n"))
-@end example
+@end lisp
 
 In this example, the resulting @file{/gnu/store/@dots{}-profile.sh} file
 will reference @var{coreutils}, @var{grep}, and @var{sed}, thereby
@@ -7556,10 +7556,10 @@ Return an object representing store file @var{name} containing
 @var{text}.  @var{text} is a sequence of strings and file-like objects,
 as in:
 
-@example
+@lisp
 (mixed-text-file "profile"
                  "export PATH=" coreutils "/bin:" grep "/bin")
-@end example
+@end lisp
 
 This is the declarative counterpart of @code{text-file*}.
 @end deffn
@@ -7570,13 +7570,13 @@ Each item in @var{files} must be a two-element list where the first element is t
 file name to use in the new directory, and the second element is a gexp
 denoting the target file.  Here's an example:
 
-@example
+@lisp
 (file-union "etc"
             `(("hosts" ,(plain-file "hosts"
                                     "127.0.0.1 localhost"))
               ("bashrc" ,(plain-file "bashrc"
                                      "alias ls='ls --color=auto'"))))
-@end example
+@end lisp
 
 This yields an @code{etc} directory containing these two files.
 @end deffn
@@ -7585,9 +7585,9 @@ This yields an @code{etc} directory containing these two files.
 Return a directory that is the union of @var{things}, where @var{things} is a list of
 file-like objects denoting directories.  For example:
 
-@example
+@lisp
 (directory-union "guile+emacs" (list guile emacs))
-@end example
+@end lisp
 
 yields a directory that is the union of the @code{guile} and @code{emacs} packages.
 @end deffn
@@ -7599,19 +7599,19 @@ and @var{suffix}, where @var{obj} is a lowerable object and each
 
 As an example, consider this gexp:
 
-@example
+@lisp
 (gexp->script "run-uname"
               #~(system* #$(file-append coreutils
                                         "/bin/uname")))
-@end example
+@end lisp
 
 The same effect could be achieved with:
 
-@example
+@lisp
 (gexp->script "run-uname"
               #~(system* (string-append #$coreutils
                                         "/bin/uname")))
-@end example
+@end lisp
 
 There is one difference though: in the @code{file-append} case, the
 resulting script contains the absolute file name as a string, whereas in
@@ -8099,9 +8099,9 @@ Build the package, derivation, or other file-like object that the code within
 As an example, @var{file} might contain a package definition like this
 (@pxref{Defining Packages}):
 
-@example
+@lisp
 @verbatiminclude package-hello.scm
-@end example
+@end lisp
 
 @item --expression=@var{expr}
 @itemx -e @var{expr}
@@ -8974,13 +8974,13 @@ and @command{guix refresh} needs a little help.  Most updaters honor the
 @code{upstream-name} property in package definitions, which can be used
 to that effect:
 
-@example
+@lisp
 (define-public network-manager
   (package
     (name "network-manager")
     ;; @dots{}
     (properties '((upstream-name . "NetworkManager")))))
-@end example
+@end lisp
 
 When passed @code{--update}, it modifies distribution source files to
 update the version numbers and source tarball hashes of those package
@@ -9323,14 +9323,14 @@ Package developers can specify in package recipes the
 name and version of the package when they differ from the name or version
 that Guix uses, as in this example:
 
-@example
+@lisp
 (package
   (name "grub")
   ;; @dots{}
   ;; CPE calls this package "grub2".
   (properties '((cpe-name . "grub2")
                 (cpe-version . "2.3")))
-@end example
+@end lisp
 
 @c See <https://www.openwall.com/lists/oss-security/2017/03/15/3>.
 Some entries in the CVE database do not specify which version of a
@@ -9338,7 +9338,7 @@ package they apply to, and would thus ``stick around'' forever.  Package
 developers who found CVE alerts and verified they can be ignored can
 declare them as in this example:
 
-@example
+@lisp
 (package
   (name "t1lib")
   ;; @dots{}
@@ -9347,7 +9347,7 @@ declare them as in this example:
                                     "CVE-2011-1553"
                                     "CVE-2011-1554"
                                     "CVE-2011-5244")))))
-@end example
+@end lisp
 
 @item formatting
 Warn about obvious source code formatting issues: trailing white space,
@@ -10447,11 +10447,11 @@ mode, as in the example above.  However, more recent machines rely instead on
 the @dfn{Unified Extensible Firmware Interface} (UEFI) to boot.  In that case,
 the @code{bootloader} field should contain something along these lines:
 
-@example
+@lisp
 (bootloader-configuration
   (bootloader grub-efi-bootloader)
   (target "/boot/efi"))
-@end example
+@end lisp
 
 @xref{Bootloader Configuration}, for more information on the available
 configuration options.
@@ -10588,11 +10588,11 @@ Partitioning,,, guile, GNU Guile Reference Manual}).  For instance, the
 following expression returns a list that contains all the services in
 @code{%desktop-services} minus the Avahi service:
 
-@example
+@lisp
 (remove (lambda (service)
           (eq? (service-kind service) avahi-service-type))
         %desktop-services)
-@end example
+@end lisp
 
 @unnumberedsubsec Instantiating the System
 
@@ -10753,12 +10753,12 @@ the home directory of newly-created user accounts.
 
 For instance, a valid value may look like this:
 
-@example
+@lisp
 `((".bashrc" ,(plain-file "bashrc" "echo Hello\n"))
   (".guile" ,(plain-file "guile"
                          "(use-modules (ice-9 readline))
                           (activate-readline)")))
-@end example
+@end lisp
 
 @item @code{issue} (default: @code{%default-issue})
 A string denoting the contents of the @file{/etc/issue} file, which is
@@ -10836,14 +10836,14 @@ this identifier resolves to the operating system being defined.
 The example below shows how to refer to the operating system being defined in
 the definition of the @code{label} field:
 
-@example
+@lisp
 (use-modules (gnu) (guix))
 
 (operating-system
   ;; ...
   (label (package-full-name
           (operating-system-kernel this-operating-system))))
-@end example
+@end lisp
 
 It is an error to refer to @code{this-operating-system} outside an operating
 system definition.
@@ -10859,12 +10859,12 @@ The list of file systems to be mounted is specified in the
 (@pxref{Using the Configuration System}).  Each file system is declared
 using the @code{file-system} form, like this:
 
-@example
+@lisp
 (file-system
   (mount-point "/home")
   (device "/dev/sda3")
   (type "ext4"))
-@end example
+@end lisp
 
 As usual, some of the fields are mandatory---those shown in the example
 above---while others can be omitted.  These are described below.
@@ -10898,12 +10898,12 @@ procedure, UUIDs are created using @code{uuid}, and @file{/dev} node are
 plain strings.  Here's an example of a file system referred to by its
 label, as shown by the @command{e2label} command:
 
-@example
+@lisp
 (file-system
   (mount-point "/home")
   (type "ext4")
   (device (file-system-label "my-home")))
-@end example
+@end lisp
 
 @findex uuid
 UUIDs are converted from their string representation (as shown by the
@@ -10914,12 +10914,12 @@ form of UUID used by the ext2 family of file systems and others, but it
 is different from ``UUIDs'' found in FAT file systems, for instance.},
 like this:
 
-@example
+@lisp
 (file-system
   (mount-point "/home")
   (type "ext4")
   (device (uuid "4dab5feb-d176-45de-b287-9b0a6e4c01cb")))
-@end example
+@end lisp
 
 When the source of a file system is a mapped device (@pxref{Mapped
 Devices}), its @code{device} field @emph{must} refer to the mapped
@@ -11094,12 +11094,12 @@ The @file{/dev/mapper/home}
 device can then be used as the @code{device} of a @code{file-system}
 declaration (@pxref{File Systems}).
 
-@example
+@lisp
 (mapped-device
   (source "/dev/sda3")
   (target "home")
   (type luks-device-mapping))
-@end example
+@end lisp
 
 Alternatively, to become independent of device numbering, one may obtain
 the LUKS UUID (@dfn{unique identifier}) of the source device by a
@@ -11111,12 +11111,12 @@ cryptsetup luksUUID /dev/sda3
 
 and use it as follows:
 
-@example
+@lisp
 (mapped-device
   (source (uuid "cb67fc72-0d54-4c88-9d4b-b225f30b0f44"))
   (target "home")
   (type luks-device-mapping))
-@end example
+@end lisp
 
 @cindex swap encryption
 It is also desirable to encrypt swap space, since swap space may contain
@@ -11128,12 +11128,12 @@ swap file is encrypted because the entire device is encrypted.
 A RAID device formed of the partitions @file{/dev/sda1} and @file{/dev/sdb1}
 may be declared as follows:
 
-@example
+@lisp
 (mapped-device
   (source (list "/dev/sda1" "/dev/sdb1"))
   (target "/dev/md0")
   (type raid-device-mapping))
-@end example
+@end lisp
 
 The @file{/dev/md0} device can then be used as the @code{device} of a
 @code{file-system} declaration (@pxref{File Systems}).
@@ -11152,7 +11152,7 @@ User accounts and groups are entirely managed through the
 @code{operating-system} declaration.  They are specified with the
 @code{user-account} and @code{user-group} forms:
 
-@example
+@lisp
 (user-account
   (name "alice")
   (group "users")
@@ -11162,7 +11162,7 @@ User accounts and groups are entirely managed through the
                           "cdrom")) ;the good ol' CD-ROM
   (comment "Bob's sister")
   (home-directory "/home/alice"))
-@end example
+@end lisp
 
 When booting or upon completion of @command{guix system reconfigure},
 the system ensures that only the user accounts and groups specified in
@@ -11226,14 +11226,14 @@ If you @emph{do} want to set an initial password for an account, then
 this field must contain the encrypted password, as a string.  You can use the
 @code{crypt} procedure for this purpose:
 
-@example
+@lisp
 (user-account
   (name "charlie")
   (group "users")
 
   ;; Specify a SHA-512-hashed initial password.
   (password (crypt "InitialPassword!" "$6$abc")))
-@end example
+@end lisp
 
 @quotation Note
 The hash of this initial password will be available in a file in
@@ -11251,9 +11251,9 @@ Guile Reference Manual}, for information on Guile's @code{crypt} procedure.
 @cindex groups
 User group declarations are even simpler:
 
-@example
+@lisp
 (user-group (name "students"))
-@end example
+@end lisp
 
 @deftp {Data Type} user-group
 This type is for, well, user groups.  There are just a few fields:
@@ -11340,7 +11340,7 @@ optional variant name, an optional keyboard model name, and a possibly empty
 list of additional options.  In most cases the layout name is all you care
 about.  Here are a few example:
 
-@example
+@lisp
 ;; The German QWERTZ layout.  Here we assume a standard
 ;; "pc105" keyboard model.
 (keyboard-layout "de")
@@ -11365,7 +11365,7 @@ about.  Here are a few example:
 ;; dead keys to enter accented characters.  This is for an
 ;; Apple MacBook keyboard.
 (keyboard-layout "us" "intl" #:model "macbook78")
-@end example
+@end lisp
 
 See the @file{share/X11/xkb} directory of the @code{xkeyboard-config} package
 for a complete list of supported layouts, variants, and models.
@@ -11455,20 +11455,20 @@ used locales, but not all the available locales, in order to save space.
 For instance, to add the North Frisian locale for Germany, the value of
 that field may be:
 
-@example
+@lisp
 (cons (locale-definition
         (name "fy_DE.utf8") (source "fy_DE"))
       %default-locale-definitions)
-@end example
+@end lisp
 
 Likewise, to save space, one might want @code{locale-definitions} to
 list only the locales that are actually used, as in:
 
-@example
+@lisp
 (list (locale-definition
         (name "ja_JP.eucjp") (source "ja_JP")
         (charset "EUC-JP")))
-@end example
+@end lisp
 
 @vindex LOCPATH
 The compiled locale definitions are available at
@@ -11554,13 +11554,13 @@ it---this is especially crucial on a multi-user system.  To do that, the
 administrator can specify several libc packages in the
 @code{locale-libcs} field of @code{operating-system}:
 
-@example
+@lisp
 (use-package-modules base)
 
 (operating-system
   ;; @dots{}
   (locale-libcs (list glibc-2.21 (canonical-package glibc))))
-@end example
+@end lisp
 
 This example would lead to a system containing locale definitions for
 both libc 2.21 and the current version of libc in
@@ -11665,11 +11665,11 @@ This is the default value of the @code{services} field of
 system, you will want to append services to @code{%base-services}, like
 this:
 
-@example
+@lisp
 (append (list (service avahi-service-type)
               (service openssh-service-type))
         %base-services)
-@end example
+@end lisp
 @end defvr
 
 @defvr {Scheme Variable} special-files-service-type
@@ -11682,19 +11682,19 @@ and the second element is its target.  By default it is:
 
 @cindex @file{/bin/sh}
 @cindex @file{sh}, in @file{/bin}
-@example
-`(("/bin/sh" ,(file-append @var{bash} "/bin/sh")))
-@end example
+@lisp
+`(("/bin/sh" ,(file-append bash "/bin/sh")))
+@end lisp
 
 @cindex @file{/usr/bin/env}
 @cindex @file{env}, in @file{/usr/bin}
 If you want to add, say, @code{/usr/bin/env} to your system, you can
 change it to:
 
-@example
-`(("/bin/sh" ,(file-append @var{bash} "/bin/sh"))
-  ("/usr/bin/env" ,(file-append @var{coreutils} "/bin/env")))
-@end example
+@lisp
+`(("/bin/sh" ,(file-append bash "/bin/sh"))
+  ("/usr/bin/env" ,(file-append coreutils "/bin/env")))
+@end lisp
 
 Since this is part of @code{%base-services}, you can use
 @code{modify-services} to customize the set of special files
@@ -11710,10 +11710,10 @@ For example, adding the following lines to the @code{services} field of
 your operating system declaration leads to a @file{/usr/bin/env}
 symlink:
 
-@example
+@lisp
 (extra-special-file "/usr/bin/env"
                     (file-append coreutils "/bin/env"))
-@end example
+@end lisp
 @end deffn
 
 @deffn {Scheme Procedure} host-name-service @var{name}
@@ -12212,14 +12212,14 @@ In the following example, a rule for a USB device is defined to be
 stored in the file @file{90-usb-thing.rules}.  The rule runs a script
 upon detecting a USB device with a given product identifier.
 
-@example
+@lisp
 (define %example-udev-rule
   (udev-rule
     "90-usb-thing.rules"
     (string-append "ACTION==\"add\", SUBSYSTEM==\"usb\", "
                    "ATTR@{product@}==\"Example\", "
                    "RUN+=\"/path/to/script\"")))
-@end example
+@end lisp
 
 The @command{herd rules udev} command, as root, returns the name of the
 directory containing all the active udev rules.
@@ -12227,7 +12227,7 @@ directory containing all the active udev rules.
 
 Here we show how the default @var{udev-service} can be extended with it.
 
-@example
+@lisp
 (operating-system
  ;; @dots{}
  (services
@@ -12236,7 +12236,7 @@ Here we show how the default @var{udev-service} can be extended with it.
      (udev-configuration (inherit config)
       (rules (append (udev-configuration-rules config)
                      (list %example-udev-rule))))))))
-@end example
+@end lisp
 
 @deffn {Scheme Procedure} file->udev-rule [@var{file-name} @var{file}]
 Return a udev file named @var{file-name} containing the rules defined
@@ -12244,7 +12244,7 @@ within @var{file}, a file-like object.
 
 The following example showcases how we can use an existing rule file.
 
-@example
+@lisp
 (use-modules (guix download)     ;for url-fetch
              (guix packages)     ;for origin
              ;; @dots{})
@@ -12259,7 +12259,7 @@ The following example showcases how we can use an existing rule file.
                            "android-udev-rules/" version "/51-android.rules"))
        (sha256
         (base32 "0lmmagpyb6xsq6zcr2w1cyx9qmjqmajkvrdbhjx32gqf1d9is003"))))))
-@end example
+@end lisp
 @end deffn
 
 Additionally, Guix package definitions can be included in @var{rules} in
@@ -12278,7 +12278,7 @@ create such a group, we must define it both as part of the
 @var{supplementary-groups} of our @var{user-account} declaration, as
 well as in the @var{groups} field of the @var{operating-system} record.
 
-@example
+@lisp
 (use-modules (gnu packages android)  ;for android-udev-rules
              (gnu system shadow)     ;for user-group
              ;; @dots{})
@@ -12304,7 +12304,7 @@ well as in the @var{groups} field of the @var{operating-system} record.
       (udev-configuration (inherit config)
                           (rules (cons android-udev-rules
                                        (udev-configuration-rules config))))))))
-@end example
+@end lisp
 
 @defvr {Scheme Variable} urandom-seed-service-type
 Save some entropy in @var{%random-seed-file} to seed @file{/dev/urandom}
@@ -12378,9 +12378,9 @@ This is a list of compression method/level tuple used when compressing
 substitutes.  For example, to compress all substitutes with @emph{both} lzip
 at level 7 and gzip at level 9, write:
 
-@example
+@lisp
 '(("lzip" 7) ("gzip" 9))
-@end example
+@end lisp
 
 Level 9 achieves the best compression ratio at the expense of increased CPU
 usage, whereas level 1 achieves fast compression.
@@ -12435,12 +12435,12 @@ Return a service that installs a configuration file for the
 The following limits definition sets two hard and soft limits for all
 login sessions of users in the @code{realtime} group:
 
-@example
+@lisp
 (pam-limits-service
  (list
   (pam-limits-entry "@@realtime" 'both 'rtprio 99)
   (pam-limits-entry "@@realtime" 'both 'memlock 'unlimited)))
-@end example
+@end lisp
 
 The first entry increases the maximum realtime priority for
 non-privileged processes; the second entry lifts any restriction of the
@@ -12647,7 +12647,7 @@ Taking an example from the Rottlog manual (@pxref{Period Related File
 Examples,,, rottlog, GNU Rot[t]log Manual}), a log rotation might be
 defined like this:
 
-@example
+@lisp
 (log-rotation
   (frequency 'daily)
   (files '("/var/log/apache/*"))
@@ -12655,7 +12655,7 @@ defined like this:
              "rotate 6"
              "notifempty"
              "nocompress")))
-@end example
+@end lisp
 
 The list of fields is as follows:
 
@@ -12704,12 +12704,12 @@ This type defines a service that runs a DHCP daemon.  To create a
 service of this type, you must supply a @code{<dhcpd-configuration>}.
 For example:
 
-@example
+@lisp
 (service dhcpd-service-type
          (dhcpd-configuration
           (config-file (local-file "my-dhcpd.conf"))
           (interfaces '("enp0s25"))))
-@end example
+@end lisp
 @end deffn
 
 @deftp {Data Type} dhcpd-configuration
@@ -12765,11 +12765,11 @@ to handle.
 
 For example:
 
-@example
+@lisp
 (static-networking-service "eno1" "192.168.1.82"
                            #:gateway "192.168.1.2"
                            #:name-servers '("192.168.1.2"))
-@end example
+@end lisp
 @end deffn
 
 @cindex wicd
@@ -12924,11 +12924,11 @@ a network connection manager.
 Its value must be an
 @code{connman-configuration} record as in this example:
 
-@example
+@lisp
 (service connman-service-type
          (connman-configuration
            (disable-vpn? #t)))
-@end example
+@end lisp
 
 See below for details about @code{connman-configuration}.
 @end deffn
@@ -13066,7 +13066,7 @@ Run the @command{ntpd}, the Network Time Protocol (NTP) daemon, as implemented
 by @uref{http://www.openntpd.org, OpenNTPD}.  The daemon will keep the system
 clock synchronized with that of the given servers.
 
-@example
+@lisp
 (service
  openntpd-service-type
  (openntpd-configuration
@@ -13076,7 +13076,7 @@ clock synchronized with that of the given servers.
   (constraints-from '("https://www.google.com/"))
   (allow-large-adjustment? #t)))
 
-@end example
+@end lisp
 @end deffn
 
 @deftp {Data Type} openntpd-configuration
@@ -13126,7 +13126,7 @@ built-in @command{echo} service, as well as an smtp service which
 forwards smtp traffic over ssh to a server @code{smtp-server} behind a
 gateway @code{hostname}:
 
-@example
+@lisp
 (service
  inetd-service-type
  (inetd-configuration
@@ -13148,7 +13148,7 @@ gateway @code{hostname}:
              (arguments
               '("ssh" "-qT" "-i" "/path/to/ssh_key"
                 "-W" "smtp-server:25" "user@@hostname")))))
-@end example
+@end lisp
 
 See below for more details about @code{inetd-configuration}.
 @end deffn
@@ -13284,9 +13284,9 @@ This is the service type for the @uref{https://rsync.samba.org, rsync} daemon,
 The value for this service type is a
 @command{rsync-configuration} record as in this example:
 
-@example
+@lisp
 (service rsync-service-type)
-@end example
+@end lisp
 
 See below for details about @code{rsync-configuration}.
 @end deffn
@@ -13390,7 +13390,7 @@ This is the type for the @uref{http://www.openssh.org, OpenSSH} secure
 shell daemon, @command{sshd}.  Its value must be an
 @code{openssh-configuration} record as in this example:
 
-@example
+@lisp
 (service openssh-service-type
          (openssh-configuration
            (x11-forwarding? #t)
@@ -13398,18 +13398,18 @@ shell daemon, @command{sshd}.  Its value must be an
            (authorized-keys
              `(("alice" ,(local-file "alice.pub"))
                ("bob" ,(local-file "bob.pub"))))))
-@end example
+@end lisp
 
 See below for details about @code{openssh-configuration}.
 
 This service can be extended with extra authorized keys, as in this
 example:
 
-@example
+@lisp
 (service-extension openssh-service-type
                    (const `(("charlie"
                              ,(local-file "charlie.pub")))))
-@end example
+@end lisp
 @end deffn
 
 @deftp {Data Type} openssh-configuration
@@ -13486,12 +13486,12 @@ subsystem request.
 
 The command @command{internal-sftp} implements an in-process SFTP
 server.  Alternately, one can specify the @command{sftp-server} command:
-@example
+@lisp
 (service openssh-service-type
          (openssh-configuration
           (subsystems
            `(("sftp" ,(file-append openssh "/libexec/sftp-server"))))))
-@end example
+@end lisp
 
 @item @code{accepted-environment} (default: @code{'()})
 List of strings describing which environment variables may be exported.
@@ -13504,11 +13504,11 @@ It is set by terminal emulators, which support colors.  You can use it in
 your shell's ressource file to enable colors for the prompt and commands
 if this variable is set.
 
-@example
+@lisp
 (service openssh-service-type
          (openssh-configuration
            (accepted-environment '("COLORTERM"))))
-@end example
+@end lisp
 
 @item @code{authorized-keys} (default: @code{'()})
 @cindex authorized keys, SSH
@@ -13517,13 +13517,13 @@ This is the list of authorized keys.  Each element of the list is a user
 name followed by one or more file-like objects that represent SSH public
 keys.  For example:
 
-@example
+@lisp
 (openssh-configuration
   (authorized-keys
     `(("rekado" ,(local-file "rekado.pub"))
       ("chris" ,(local-file "chris.pub"))
       ("root" ,(local-file "rekado.pub") ,(local-file "chris.pub")))))
-@end example
+@end lisp
 
 @noindent
 registers the specified public keys for user accounts @code{rekado},
@@ -13546,12 +13546,12 @@ is especially useful for elaborate configurations that cannot be expressed
 otherwise.  This configuration, for example, would generally disable root
 logins, but permit them from one specific IP address:
 
-@example
+@lisp
 (openssh-configuration
   (extra-content "\
 Match Address 192.168.0.1
   PermitRootLogin yes"))
-@end example
+@end lisp
 
 @end table
 @end deftp
@@ -13564,10 +13564,10 @@ object.
 For example, to specify a Dropbear service listening on port 1234, add
 this call to the operating system's @code{services} field:
 
-@example
+@lisp
 (dropbear-service (dropbear-configuration
                     (port-number 1234)))
-@end example
+@end lisp
 @end deffn
 
 @deftp {Data Type} dropbear-configuration
@@ -13608,7 +13608,7 @@ This variable is typically used in the @code{hosts-file} field of an
 @code{operating-system} declaration (@pxref{operating-system Reference,
 @file{/etc/hosts}}):
 
-@example
+@lisp
 (use-modules (gnu) (guix))
 
 (operating-system
@@ -13620,7 +13620,7 @@ This variable is typically used in the @code{hosts-file} field of an
     (plain-file "hosts"
                 (string-append (local-host-aliases host-name)
                                %facebook-host-aliases))))
-@end example
+@end lisp
 
 This mechanism can prevent programs running locally, such as Web
 browsers, from accessing Facebook.
@@ -14054,9 +14054,9 @@ system, add a @code{cups-service} to the operating system definition:
 The service type for the CUPS print server.  Its value should be a valid
 CUPS configuration (see below).  To use the default settings, simply
 write:
-@example
+@lisp
 (service cups-service-type)
-@end example
+@end lisp
 @end deffn
 
 The CUPS configuration controls the basic things about your CUPS
@@ -14072,13 +14072,13 @@ support for Epson printers @i{via} the @code{escpr} package and for HP
 printers @i{via} the @code{hplip-minimal} package.  You can do that directly,
 like this (you need to use the @code{(gnu packages cups)} module):
 
-@example
+@lisp
 (service cups-service-type
          (cups-configuration
            (web-interface? #t)
            (extensions
              (list cups-filters escpr hplip-minimal))))
-@end example
+@end lisp
 
 Note: If you wish to use the Qt5 based GUI which comes with the hplip
 package then it is suggested that you install the @code{hplip} package,
@@ -14886,12 +14886,12 @@ For example, if your @code{cupsd.conf} and @code{cups-files.conf} are in
 strings of the same name, you could instantiate a CUPS service like
 this:
 
-@example
+@lisp
 (service cups-service-type
          (opaque-cups-configuration
            (cupsd.conf cupsd.conf)
            (cups-files.conf cups-files.conf)))
-@end example
+@end lisp
 
 
 @node Desktop Services
@@ -15034,7 +15034,7 @@ them by default.  To add GNOME, Xfce or MATE, just @code{cons} them onto
 @code{%desktop-services} in the @code{services} field of your
 @code{operating-system}:
 
-@example
+@lisp
 (use-modules (gnu))
 (use-service-modules desktop)
 (operating-system
@@ -15044,7 +15044,7 @@ them by default.  To add GNOME, Xfce or MATE, just @code{cons} them onto
                    (service xfce-desktop-service)
                    %desktop-services))
   ...)
-@end example
+@end lisp
 
 These desktop environments will then be available as options in the
 graphical login window.
@@ -15313,9 +15313,9 @@ Architecture} (ALSA) system, which generates the @file{/etc/asound.conf}
 configuration file.  The value for this type is a @command{alsa-configuration}
 record as in this example:
 
-@example
+@lisp
 (service alsa-service-type)
-@end example
+@end lisp
 
 See below for details about @code{alsa-configuration}.
 @end deffn
@@ -15401,7 +15401,7 @@ to create a geographic database using the @code{postgis} extension, a user can
 configure the postgresql-service as in this example:
 
 @cindex postgis
-@example
+@lisp
 (use-package-modules databases geo)
 
 (operating-system
@@ -15413,7 +15413,7 @@ configure the postgresql-service as in this example:
     (cons*
       (postgresql-service #:extension-packages (list postgis))
       %base-services)))
-@end example
+@end lisp
 
 Then the extension becomes visible and you can initialise an empty geographic
 database in this way:
@@ -15461,9 +15461,9 @@ Memcached} service, which provides a distributed in memory cache.  The
 value for the service type is a @code{memcached-configuration} object.
 @end defvr
 
-@example
+@lisp
 (service memcached-service-type)
-@end example
+@end lisp
 
 @deftp {Data Type} memcached-configuration
 Data type representing the configuration of memcached.
@@ -15492,9 +15492,9 @@ This is the service type for @uref{https://www.mongodb.com/, MongoDB}.
 The value for the service type is a @code{mongodb-configuration} object.
 @end defvr
 
-@example
+@lisp
 (service mongodb-service-type)
-@end example
+@end lisp
 
 @deftp {Data Type} mongodb-configuration
 Data type representing the configuration of mongodb.
@@ -15565,11 +15565,11 @@ administrator to specify these parameters via a uniform Scheme interface.
 For example, to specify that mail is located at @code{maildir~/.mail},
 one would instantiate the Dovecot service like this:
 
-@example
+@lisp
 (dovecot-service #:config
                  (dovecot-configuration
                   (mail-location "maildir:~/.mail")))
-@end example
+@end lisp
 
 The available configuration parameters follow.  Each parameter
 definition is preceded by its type; for example, @samp{string-list foo}
@@ -16905,11 +16905,11 @@ The contents of the @code{dovecot.conf}, as a string.
 For example, if your @code{dovecot.conf} is just the empty string, you
 could instantiate a dovecot service like this:
 
-@example
+@lisp
 (dovecot-service #:config
                  (opaque-dovecot-configuration
                   (string "")))
-@end example
+@end lisp
 
 @subsubheading OpenSMTPD Service
 
@@ -16918,11 +16918,11 @@ This is the type of the @uref{https://www.opensmtpd.org, OpenSMTPD}
 service, whose value should be an @code{opensmtpd-configuration} object
 as in this example:
 
-@example
+@lisp
 (service opensmtpd-service-type
          (opensmtpd-configuration
            (config-file (local-file "./my-smtpd.conf"))))
-@end example
+@end lisp
 @end deffn
 
 @deftp {Data Type} opensmtpd-configuration
@@ -16952,11 +16952,11 @@ This is the type of the @uref{https://exim.org, Exim} mail transfer
 agent (MTA), whose value should be an @code{exim-configuration} object
 as in this example:
 
-@example
+@lisp
 (service exim-service-type
          (exim-configuration
            (config-file (local-file "./my-exim.conf"))))
-@end example
+@end lisp
 @end deffn
 
 In order to use an @code{exim-service-type} service you must also have a
@@ -17280,11 +17280,11 @@ Defaults to @samp{()}.
 This is the type of the service which provides @code{/etc/aliases},
 specifying how to deliver mail to users on this system.
 
-@example
+@lisp
 (service mail-aliases-service-type
          '(("postmaster" "bob")
            ("bob" "bob@@example.com" "bob@@example2.com")))
-@end example
+@end lisp
 @end deffn
 
 The configuration for a @code{mail-aliases-service-type} service is an
@@ -17307,11 +17307,11 @@ This is the type of the GNU Mailutils IMAP4 Daemon (@pxref{imap4d,,,
 mailutils, GNU Mailutils Manual}), whose value should be an
 @code{imap4d-configuration} object as in this example:
 
-@example
+@lisp
 (service imap4d-service-type
          (imap4d-configuration
            (config-file (local-file "imap4d.conf"))))
-@end example
+@end lisp
 @end deffn
 
 @deftp {Data Type} imap4d-configuration
@@ -17345,7 +17345,7 @@ This is the type for the @uref{https://prosody.im, Prosody XMPP
 communication server}.  Its value must be a @code{prosody-configuration}
 record as in this example:
 
-@example
+@lisp
 (service prosody-service-type
          (prosody-configuration
           (modules-enabled (cons "groups" "mam" %default-modules-enabled))
@@ -17359,7 +17359,7 @@ record as in this example:
            (list
             (virtualhost-configuration
              (domain "example.net"))))))
-@end example
+@end lisp
 
 See below for details about @code{prosody-configuration}.
 
@@ -17747,11 +17747,11 @@ The contents of the @code{prosody.cfg.lua} to use.
 For example, if your @code{prosody.cfg.lua} is just the empty
 string, you could instantiate a prosody service like this:
 
-@example
+@lisp
 (service prosody-service-type
          (opaque-prosody-configuration
           (prosody.cfg.lua "")))
-@end example
+@end lisp
 
 @c end of Prosody auto-generated documentation
 
@@ -17770,9 +17770,9 @@ below).
 To have BitlBee listen on port 6667 on localhost, add this line to your
 services:
 
-@example
+@lisp
 (service bitlbee-service-type)
-@end example
+@end lisp
 @end defvr
 
 @deftp {Data Type} bitlbee-configuration
@@ -17844,7 +17844,7 @@ the server of the @uref{https://mumble.info, Mumble} voice-over-IP
 The service type for the Murmur server.  An example configuration can
 look like this:
 
-@example
+@lisp
 (service murmur-service-type
          (murmur-configuration
           (welcome-text
@@ -17852,7 +17852,7 @@ look like this:
           (cert-required? #t) ;disallow text password logins
           (ssl-cert "/etc/letsencrypt/live/mumble.example.com/fullchain.pem")
           (ssl-key "/etc/letsencrypt/live/mumble.example.com/privkey.pem")))
-@end example
+@end lisp
 
 After reconfiguring your system, you can manually set the murmur @code{SuperUser}
 password with the command that is printed during the activation phase.
@@ -17966,14 +17966,14 @@ Should logged ips be obfuscated to protect the privacy of users.
 @item @code{ssl-cert} (default: @code{#f})
 File name of the SSL/TLS certificate used for encrypted connections.
 
-@example
+@lisp
 (ssl-cert "/etc/letsencrypt/live/example.com/fullchain.pem")
-@end example
+@end lisp
 @item @code{ssl-key} (default: @code{#f})
 Filepath to the ssl private key used for encrypted connections.
-@example
+@lisp
 (ssl-key "/etc/letsencrypt/live/example.com/privkey.pem")
-@end example
+@end lisp
 
 @item @code{ssl-dh-params} (default: @code{#f})
 File name of a PEM-encoded file with Diffie-Hellman parameters
@@ -18047,20 +18047,20 @@ viewing and searching log files.
 The following example will configure the service with default values.
 By default, Tailon can be accessed on port 8080 (@code{http://localhost:8080}).
 
-@example
+@lisp
 (service tailon-service-type)
-@end example
+@end lisp
 
 The following example customises more of the Tailon configuration,
 adding @command{sed} to the list of allowed commands.
 
-@example
+@lisp
 (service tailon-service-type
          (tailon-configuration
            (config-file
              (tailon-configuration-file
                (allowed-commands '("tail" "grep" "awk" "sed"))))))
-@end example
+@end lisp
 
 
 @deftp {Data Type} tailon-configuration
@@ -18076,11 +18076,11 @@ The configuration file to use for Tailon. This can be set to a
 For example, to instead use a local file, the @code{local-file} function
 can be used:
 
-@example
+@lisp
 (service tailon-service-type
          (tailon-configuration
            (config-file (local-file "./my-tailon.conf"))))
-@end example
+@end lisp
 
 @item @code{package} (default: @code{tailon})
 The tailon package to use.
@@ -18136,12 +18136,12 @@ restricted to the credentials provided here. To configure users, use a
 list of pairs, where the first element of the pair is the username, and
 the 2nd element of the pair is the password.
 
-@example
+@lisp
 (tailon-configuration-file
   (http-auth "basic")
   (users     '(("user1" . "password1")
                ("user2" . "password2"))))
-@end example
+@end lisp
 
 @end table
 @end deftp
@@ -18158,11 +18158,11 @@ This is the service type for the
 service,  its value must be a @code{darkstat-configuration} record as in
 this example:
 
-@example
+@lisp
 (service darkstat-service-type
          (darkstat-configuration
            (interface "eno1")))
-@end example
+@end lisp
 @end defvar
 
 @deftp {Data Type} darkstat-configuration
@@ -18202,11 +18202,11 @@ This is the service type for the
 service, its value must be a @code{prometheus-node-exporter-configuration}
 record as in this example:
 
-@example
+@lisp
 (service prometheus-node-exporter-service-type
          (prometheus-node-exporter-configuration
            (web-listen-address ":9100")))
-@end example
+@end lisp
 @end defvar
 
 @deftp {Data Type} prometheus-node-exporter-configuration
@@ -18682,7 +18682,7 @@ Here is a simple operating system declaration with a default configuration of
 the @code{nslcd-service-type} and a Name Service Switch configuration that
 consults the @code{ldap} name service last:
 
-@example
+@lisp
 (use-service-modules authentication)
 (use-modules (gnu system nss))
 ...
@@ -18704,7 +18704,7 @@ consults the @code{ldap} name service last:
       (group    services)
       (netgroup services)
       (gshadow  services)))))
-@end example
+@end lisp
 
 @c %start of generated documentation for nslcd-configuration
 
@@ -19163,19 +19163,19 @@ Service type for the @uref{https://httpd.apache.org/,Apache HTTP} server
 
 A simple example configuration is given below.
 
-@example
+@lisp
 (service httpd-service-type
          (httpd-configuration
            (config
              (httpd-config-file
                (server-name "www.example.com")
                (document-root "/srv/http/www.example.com")))))
-@end example
+@end lisp
 
 Other services can also extend the @code{httpd-service-type} to add to
 the configuration.
 
-@example
+@lisp
 (simple-service 'my-extra-server httpd-service-type
                 (list
                   (httpd-virtualhost
@@ -19183,7 +19183,7 @@ the configuration.
                     (list (string-append
                            "ServerName "www.example.com
                             DocumentRoot \"/srv/http/www.example.com\"")))))
-@end example
+@end lisp
 @end deffn
 
 The details for the @code{httpd-configuration}, @code{httpd-module},
@@ -19240,7 +19240,7 @@ additional configuration.
 For example, in order to handle requests for PHP files, you can use Apache’s
 @code{mod_proxy_fcgi} module along with @code{php-fpm-service-type}:
 
-@example
+@lisp
 (service httpd-service-type
          (httpd-configuration
           (config
@@ -19261,7 +19261,7 @@ For example, in order to handle requests for PHP files, you can use Apache’s
          (php-fpm-configuration
           (socket "/var/run/php-fpm.sock")
           (socket-group "httpd")))
-@end example
+@end lisp
 
 @item @code{server-root} (default: @code{httpd})
 The @code{ServerRoot} in the configuration file, defaults to the httpd
@@ -19315,7 +19315,7 @@ This data type represents a virtualhost configuration block for the httpd servic
 
 These should be added to the extra-config for the httpd-service.
 
-@example
+@lisp
 (simple-service 'my-extra-server httpd-service-type
                 (list
                   (httpd-virtualhost
@@ -19323,7 +19323,7 @@ These should be added to the extra-config for the httpd-service.
                     (list (string-append
                            "ServerName "www.example.com
                             DocumentRoot \"/srv/http/www.example.com\"")))))
-@end example
+@end lisp
 
 @table @asis
 @item @code{addresses-and-ports}
@@ -19344,25 +19344,25 @@ value for this service type is a @code{<nginx-configuration>} record.
 
 A simple example configuration is given below.
 
-@example
+@lisp
 (service nginx-service-type
          (nginx-configuration
            (server-blocks
              (list (nginx-server-configuration
                      (server-name '("www.example.com"))
                      (root "/srv/http/www.example.com"))))))
-@end example
+@end lisp
 
 In addition to adding server blocks to the service configuration
 directly, this service can be extended by other services to add server
 blocks, as in this example:
 
-@example
+@lisp
 (simple-service 'my-extra-server nginx-service-type
                 (list (nginx-server-configuration
                         (root "/srv/http/extra-website")
                         (try-files (list "$uri" "$uri/index.html")))))
-@end example
+@end lisp
 @end deffn
 
 At startup, @command{nginx} has not yet read its configuration file, so
@@ -19398,14 +19398,14 @@ file, the elements should be of type
 The following example would setup NGinx to serve @code{www.example.com}
 from the @code{/srv/http/www.example.com} directory, without using
 HTTPS.
-@example
+@lisp
 (service nginx-service-type
          (nginx-configuration
            (server-blocks
              (list (nginx-server-configuration
                      (server-name '("www.example.com"))
                      (root "/srv/http/www.example.com"))))))
-@end example
+@end lisp
 
 @item @code{upstream-blocks} (default: @code{'()})
 A list of @dfn{upstream blocks} to create in the generated configuration
@@ -19419,7 +19419,7 @@ creates a server configuration with one location configuration, that
 will proxy requests to a upstream configuration, which will handle
 requests with two servers.
 
-@example
+@lisp
 (service
   nginx-service-type
   (nginx-configuration
@@ -19437,7 +19437,7 @@ requests with two servers.
               (name "server-proxy")
               (servers (list "server1.example.com"
                              "server2.example.com")))))))
-@end example
+@end lisp
 
 @item @code{file} (default: @code{#f})
 If a configuration @var{file} is provided, this will be used, rather than
@@ -19475,9 +19475,9 @@ path for a UNIX-domain socket on which the server will accept requests.
 Both address and port, or only address or only port can be specified.
 An address may also be a hostname, for example:
 
-@example
+@lisp
 '("127.0.0.1:8000" "127.0.0.1" "8000" "*:8000" "localhost:8000")
-@end example
+@end lisp
 
 @item @code{server-name} (default: @code{(list 'default)})
 A list of server names this server represents. @code{'default} represents the
@@ -19615,7 +19615,7 @@ VCL syntax.
 For example, to mirror @url{http://www.gnu.org,www.gnu.org} with VCL you
 can do something along these lines:
 
-@example
+@lisp
 (define %gnu-mirror
   (plain-file
    "gnu.vcl"
@@ -19629,7 +19629,7 @@ backend gnu @{ .host = "www.gnu.org"; @}"))
                             (listen '(":80"))
                             (vcl %gnu-mirror)))
                   %base-services)))
-@end example
+@end lisp
 
 The configuration of an already running Varnish instance can be inspected
 and changed using the @command{varnishadm} program.
@@ -19665,7 +19665,7 @@ Service type for Patchwork.
 The following example is an example of a minimal service for Patchwork, for
 the @code{patchwork.example.com} domain.
 
-@example
+@lisp
 (service patchwork-service-type
          (patchwork-configuration
           (domain "patchwork.example.com")
@@ -19685,7 +19685,7 @@ the @code{patchwork.example.com} domain.
             (extra-parameters
             '((mailboxes . ("Patches"))))))))
 
-@end example
+@end lisp
 
 There are three records for configuring the Patchwork service.  The
 @code{<patchwork-configuration>} relates to the configuration for Patchwork
@@ -20004,7 +20004,7 @@ A helper function to quickly add php to an @code{nginx-server-configuration}.
 @end deffn
 
 A simple services setup for nginx with php can look like this:
-@example
+@lisp
 (services (cons* (service dhcp-client-service-type)
                  (service php-fpm-service-type)
                  (service nginx-service-type
@@ -20017,7 +20017,7 @@ A simple services setup for nginx with php can look like this:
                            (ssl-certificate #f)
                            (ssl-certificate-key #f)))
                  %base-services))
-@end example
+@end lisp
 
 @cindex cat-avatar-generator
 The cat avatar generator is a simple service to demonstrate the use of php-fpm
@@ -20035,14 +20035,14 @@ be able to use @code{cache-dir} as its cache directory.
 @end deffn
 
 A simple setup for cat-avatar-generator can look like this:
-@example
+@lisp
 (services (cons* (cat-avatar-generator-service
                   #:configuration
                   (nginx-server-configuration
                     (server-name '("example.com"))))
                  ...
                  %base-services))
-@end example
+@end lisp
 
 @subsubheading Hpcguix-web
 
@@ -20099,7 +20099,7 @@ The hpcguix-web package to use.
 
 A typical hpcguix-web service declaration looks like this:
 
-@example
+@lisp
 (service hpcguix-web-service-type
          (hpcguix-web-configuration
           (specs
@@ -20107,7 +20107,7 @@ A typical hpcguix-web service declaration looks like this:
                (hpcweb-configuration
                 (title-prefix "Guix-HPC - ")
                 (menu '(("/about" "ABOUT"))))))))
-@end example
+@end lisp
 
 @quotation Note
 The hpcguix-web service periodically updates the package list it publishes by
@@ -20167,7 +20167,7 @@ can be found there:
 A service type for the @code{certbot} Let's Encrypt client.  Its value
 must be a @code{certbot-configuration} record as in this example:
 
-@example
+@lisp
 (define %nginx-deploy-hook
   (program-file
    "nginx-deploy-hook"
@@ -20184,7 +20184,7 @@ must be a @code{certbot-configuration} record as in this example:
              (deploy-hook %nginx-deploy-hook))
             (certificate-configuration
              (domains '("bar.example.net")))))))
-@end example
+@end lisp
 
 See below for details about @code{certbot-configuration}.
 @end defvr
@@ -20766,12 +20766,12 @@ The list of knot-zone-configuration used by this configuration.
 This is the type of the dnsmasq service, whose value should be an
 @code{dnsmasq-configuration} object as in this example:
 
-@example
+@lisp
 (service dnsmasq-service-type
          (dnsmasq-configuration
            (no-resolv? #t)
            (servers '("192.168.1.1"))))
-@end example
+@end lisp
 @end deffn
 
 @deftp {Data Type} dnsmasq-configuration
@@ -20824,9 +20824,9 @@ care of automatically updating DNS entries for service providers such as
 The following example show instantiates the service with its default
 configuration:
 
-@example
+@lisp
 (service ddclient-service-type)
-@end example
+@end lisp
 
 Note that ddclient needs to access credentials that are stored in a
 @dfn{secret file}, by default @file{/etc/ddclient/secrets} (see
@@ -21416,7 +21416,7 @@ and builds the packages from a manifest.  Some of the packages are defined in
 the @code{"custom-packages"} input, which is the equivalent of
 @code{GUIX_PACKAGE_PATH}.
 
-@example
+@lisp
 (define %cuirass-specs
   #~(list
      '((#:name . "my-manifest")
@@ -21447,7 +21447,7 @@ the @code{"custom-packages"} input, which is the equivalent of
 (service cuirass-service-type
          (cuirass-configuration
           (specifications %cuirass-specs)))
-@end example
+@end lisp
 
 While information related to build jobs is located directly in the
 specifications, global settings for the @command{cuirass} process are
@@ -21535,9 +21535,9 @@ source is detected.  More information can be found at
 The service type for the TLP tool.  Its value should be a valid
 TLP configuration (see below).  To use the default settings, simply
 write:
-@example
+@lisp
 (service tlp-service-type)
-@end example
+@end lisp
 @end deffn
 
 By default TLP does not need much configuration but most TLP parameters
@@ -22065,12 +22065,12 @@ of clients.
 The following example shows how one might run @code{mpd} as user
 @code{"bob"} on port @code{6666}.  It uses pulseaudio for output.
 
-@example
+@lisp
 (service mpd-service-type
          (mpd-configuration
           (user "bob")
           (port "6666")))
-@end example
+@end lisp
 
 @defvr {Scheme Variable} mpd-service-type
 The service type for @command{mpd}
@@ -22124,12 +22124,12 @@ and performs required management tasks for virtualized guests.
 This is the type of the @uref{https://libvirt.org, libvirt daemon}.
 Its value must be a @code{libvirt-configuration}.
 
-@example
+@lisp
 (service libvirt-service-type
          (libvirt-configuration
           (unix-sock-group "libvirt")
           (tls-port "16555")))
-@end example
+@end lisp
 @end deffn
 
 @c Auto-generated with (generate-libvirt-documentation)
@@ -22690,11 +22690,11 @@ itself upon receiving @code{SIGUSR1}, to allow live upgrades without downtime.
 This is the type of the virtlog daemon.
 Its value must be a @code{virtlog-configuration}.
 
-@example
+@lisp
 (service virtlog-service-type
          (virtlog-configuration
           (max-clients 1000)))
-@end example
+@end lisp
 @end deffn
 
 @deftypevr {@code{virtlog-configuration} parameter} integer log-level
@@ -22832,11 +22832,11 @@ Its value must be a @code{qemu-binfmt-configuration} object, which
 specifies the QEMU package to use as well as the architecture we want to
 emulated:
 
-@example
+@lisp
 (service qemu-binfmt-service-type
          (qemu-binfmt-configuration
            (platforms (lookup-qemu-platforms "arm" "aarch64" "mips64el"))))
-@end example
+@end lisp
 
 In this example, we enable transparent emulation for the ARM and aarch64
 platforms.  Running @code{herd stop qemu-binfmt} turns it off, and
@@ -22862,12 +22862,12 @@ that you can transparently build programs for another architecture.
 For example, let's suppose you're on an x86_64 machine and you have this
 service:
 
-@example
+@lisp
 (service qemu-binfmt-service-type
          (qemu-binfmt-configuration
            (platforms (lookup-qemu-platforms "arm"))
            (guix-support? #t)))
-@end example
+@end lisp
 
 You can run:
 
@@ -23018,7 +23018,7 @@ Compute an @code{nginx-location-configuration} that corresponds to the
 given Git http configuration.  An example nginx service definition to
 serve the default @file{/srv/git} over HTTPS might be:
 
-@example
+@lisp
 (service nginx-service-type
          (nginx-configuration
           (server-blocks
@@ -23034,7 +23034,7 @@ serve the default @file{/srv/git} over HTTPS might be:
               (list
                (git-http-nginx-location-configuration
                 (git-http-configuration (uri-path "/"))))))))))
-@end example
+@end lisp
 
 This example assumes that you are using Let's Encrypt to get your TLS
 certificate.  @xref{Certificate Services}.  The default @code{certbot}
@@ -23053,9 +23053,9 @@ repositories written in C.
 The following example will configure the service with default values.
 By default, Cgit can be accessed on port 80 (@code{http://localhost:80}).
 
-@example
+@lisp
 (service cgit-service-type)
-@end example
+@end lisp
 
 The @code{file-object} type designates either a file-like object
 (@pxref{G-Expressions, file-like objects}) or a string.
@@ -23988,11 +23988,11 @@ The contents of the @code{cgitrc}, as a string.
 For example, if your @code{cgitrc} is just the empty string, you
 could instantiate a cgit service like this:
 
-@example
+@lisp
 (service cgit-service-type
          (opaque-cgit-configuration
           (cgitrc "")))
-@end example
+@end lisp
 
 @subsubheading Gitolite Service
 
@@ -24007,13 +24007,13 @@ configuration of the permissions for the users on the repositories.
 The following example will configure Gitolite using the default @code{git}
 user, and the provided SSH public key.
 
-@example
+@lisp
 (service gitolite-service-type
          (gitolite-configuration
            (admin-pubkey (plain-file
                            "yourname.pub"
                            "ssh-rsa AAAA... guix@@example.com"))))
-@end example
+@end lisp
 
 Gitolite is configured through a special admin repository which you can clone,
 for example, if you setup Gitolite on @code{example.com}, you would run the
@@ -24056,9 +24056,9 @@ within the gitolite-admin repository.
 
 To specify the SSH key as a string, use the @code{plain-file} function.
 
-@example
+@lisp
 (plain-file "yourname.pub" "ssh-rsa AAAA... guix@@example.com")
-@end example
+@end lisp
 
 @end table
 @end deftp
@@ -24103,9 +24103,9 @@ Service type for the wesnothd service.  Its value must be a
 @code{wesnothd-configuration} object.  To run wesnothd in the default
 configuration, instantiate it as:
 
-@example
+@lisp
 (service wesnothd-service-type)
-@end example
+@end lisp
 @end defvar
 
 @deftp {Data Type} wesnothd-configuration
@@ -24133,9 +24133,9 @@ read and identify fingerprints via a fingerprint sensor.
 The service type for @command{fprintd}, which provides the fingerprint
 reading capability.
 
-@example
+@lisp
 (service fprintd-service-type)
-@end example
+@end lisp
 @end defvr
 
 @cindex sysctl
@@ -24149,11 +24149,11 @@ The service type for @command{sysctl}, which modifies kernel parameters
 under @file{/proc/sys/}.  To enable IPv4 forwarding, it can be
 instantiated as:
 
-@example
+@lisp
 (service sysctl-service-type
          (sysctl-configuration
            (settings '(("net.ipv4.ip_forward" . "1")))))
-@end example
+@end lisp
 @end defvr
 
 @deftp {Data Type} sysctl-configuration
@@ -24182,9 +24182,9 @@ Service type for the @command{pcscd} service.  Its value must be a
 @code{pcscd-configuration} object.  To run pcscd in the default
 configuration, instantiate it as:
 
-@example
+@lisp
 (service pcscd-service-type)
-@end example
+@end lisp
 @end defvr
 
 @deftp {Data Type} pcscd-configuration
@@ -24339,7 +24339,7 @@ Dictionary of English using the @code{gcide} package.
 
 The following is an example @code{dicod-service} configuration.
 
-@example
+@lisp
 (dicod-service #:config
   (dicod-configuration
    (handlers (list (dicod-handler
@@ -24353,7 +24353,7 @@ The following is an example @code{dicod-service} configuration.
                      (handler "wordnet")
                      (options '("database=wn")))
                     %dicod-database:gcide))))
-@end example
+@end lisp
 
 @cindex Docker
 @subsubheading Docker Service
@@ -24453,7 +24453,7 @@ This is the type of the service that runs build daemon of the
 @url{https://nixos.org/nix/, Nix} package manager.  Here is an example showing
 how to use it:
 
-@example
+@lisp
 (use-modules (gnu))
 (use-service-modules nix)
 (use-package-modules package-management)
@@ -24465,7 +24465,7 @@ how to use it:
 
   (services (append (list (service nix-service-type))
                     %base-services)))
-@end example
+@end lisp
 
 After @command{guix system reconfigure} configure Nix for your user:
 
@@ -24620,7 +24620,7 @@ As an example, the declaration below configures the NSS to use the
 back-end}, which supports host name lookups over multicast DNS (mDNS)
 for host names ending in @code{.local}:
 
-@example
+@lisp
 (name-service-switch
    (hosts (list %files    ;first, check /etc/hosts
 
@@ -24642,7 +24642,7 @@ for host names ending in @code{.local}:
                 ;; Finally, try with the "full" 'mdns'.
                 (name-service
                   (name "mdns")))))
-@end example
+@end lisp
 
 Do not worry: the @code{%mdns-host-lookup-nss} variable (see below)
 contains this configuration, so you will not have to type it if all you
@@ -24723,10 +24723,10 @@ An action specified using the @code{lookup-specification} macro
 (@pxref{Actions in the NSS configuration,,, libc, The GNU C Library
 Reference Manual}).  For example:
 
-@example
+@lisp
 (lookup-specification (unavailable => continue)
                       (success => return))
-@end example
+@end lisp
 @end table
 @end deftp
 
@@ -24750,11 +24750,11 @@ most use cases.  For example, assuming you need the @code{megaraid_sas}
 module in addition to the default modules to be able to access your root
 file system, you would write:
 
-@example
+@lisp
 (operating-system
   ;; @dots{}
   (initrd-modules (cons "megaraid_sas" %base-initrd-modules)))
-@end example
+@end lisp
 
 @defvr {Scheme Variable} %base-initrd-modules
 This is the list of kernel modules included in the initrd by default.
@@ -24772,14 +24772,14 @@ For example, if you want to add a bunch of kernel modules to be loaded
 at boot time, you can define the @code{initrd} field of the operating
 system declaration like this:
 
-@example
+@lisp
 (initrd (lambda (file-systems . rest)
           ;; Create a standard initrd but set up networking
           ;; with the parameters QEMU expects by default.
           (apply base-initrd file-systems
                  #:qemu-networking? #t
                  rest)))
-@end example
+@end lisp
 
 The @code{base-initrd} procedure also handles common use cases that
 involves using the system as a QEMU guest, or as a ``live'' system with
@@ -25031,13 +25031,13 @@ Should you want to list additional boot menu entries @i{via} the
 boot another distro (hard to imagine!), you can define a menu entry
 along these lines:
 
-@example
+@lisp
 (menu-entry
   (label "The Other Distro")
   (linux "/boot/old/vmlinux-2.6.32")
   (linux-arguments '("root=/dev/sda2"))
   (initrd "/boot/old/initrd"))
-@end example
+@end lisp
 
 Details below.
 
@@ -25052,9 +25052,9 @@ The label to show in the menu---e.g., @code{"GNU"}.
 @item @code{linux}
 The Linux kernel image to boot, for example:
 
-@example
+@lisp
 (file-append linux-libre "/bzImage")
-@end example
+@end lisp
 
 For GRUB, it is also possible to specify a device explicitly in the
 file path using GRUB's device naming convention (@pxref{Naming
@@ -25590,7 +25590,7 @@ guix deploy @var{file}
 Such an invocation will deploy the machines that the code within @var{file}
 evaluates to.  As an example, @var{file} might contain a definition like this:
 
-@example
+@lisp
 ;; This is a Guix deployment of a "bare bones" setup, with
 ;; no X11 display server, to a machine with an SSH daemon
 ;; listening on localhost:2222. A configuration such as this
@@ -25630,7 +25630,7 @@ evaluates to.  As an example, @var{file} might contain a definition like this:
                        (user "alice")
                        (identity "./id_rsa")
                        (port 2222)))))
-@end example
+@end lisp
 
 The file should evaluate to a list of @var{machine} objects.  This example,
 upon being deployed, will create a new generation on the remote system
@@ -25919,7 +25919,7 @@ A @dfn{service type} is a node in the DAG described above.  Let us start
 with a simple example, the service type for the Guix build daemon
 (@pxref{Invoking guix-daemon}):
 
-@example
+@lisp
 (define guix-service-type
   (service-type
    (name 'guix)
@@ -25928,7 +25928,7 @@ with a simple example, the service type for the Guix build daemon
           (service-extension account-service-type guix-accounts)
           (service-extension activation-service-type guix-activation)))
    (default-value (guix-configuration))))
-@end example
+@end lisp
 
 @noindent
 It defines three things:
@@ -25972,12 +25972,12 @@ booted.
 
 A service of this type is instantiated like this:
 
-@example
+@lisp
 (service guix-service-type
          (guix-configuration
            (build-accounts 5)
            (use-substitutes? #f)))
-@end example
+@end lisp
 
 The second argument to the @code{service} form is a value representing
 the parameters of this specific service instance.
@@ -25986,9 +25986,9 @@ information about the @code{guix-configuration} data type.  When the
 value is omitted, the default value specified by
 @code{guix-service-type} is used:
 
-@example
+@lisp
 (service guix-service-type)
-@end example
+@end lisp
 
 @code{guix-service-type} is quite simple because it extends other
 services but is not extensible itself.
@@ -25997,7 +25997,7 @@ services but is not extensible itself.
 
 The service type for an @emph{extensible} service looks like this:
 
-@example
+@lisp
 (define udev-service-type
   (service-type (name 'udev)
                 (extensions
@@ -26011,7 +26011,7 @@ The service type for an @emph{extensible} service looks like this:
                              (udev-configuration
                               (udev udev)   ;the udev package to use
                               (rules (append initial-rules rules)))))))))
-@end example
+@end lisp
 
 This is the service type for the
 @uref{https://wiki.gentoo.org/wiki/Project:Eudev, eudev device
@@ -26068,17 +26068,17 @@ raised.
 
 For instance, this:
 
-@example
+@lisp
 (service openssh-service-type)
-@end example
+@end lisp
 
 @noindent
 is equivalent to this:
 
-@example
+@lisp
 (service openssh-service-type
          (openssh-configuration))
-@end example
+@end lisp
 
 In both cases the result is an instance of @code{openssh-service-type}
 with the default configuration.
@@ -26099,7 +26099,7 @@ parameters.
 
 Here is an example of how a service is created and manipulated:
 
-@example
+@lisp
 (define s
   (service nginx-service-type
            (nginx-configuration
@@ -26113,7 +26113,7 @@ Here is an example of how a service is created and manipulated:
 
 (eq? (service-kind s) nginx-service-type)
 @result{} #t
-@end example
+@end lisp
 
 The @code{modify-services} form provides a handy way to change the
 parameters of some of the services of a list such as
@@ -26215,10 +26215,10 @@ service is an instance.
 For example, this extends mcron (@pxref{Scheduled Job Execution}) with
 an additional job:
 
-@example
+@lisp
 (simple-service 'my-mcron-job mcron-service-type
                 #~(job '(next-hour (3)) "guix gc -F 2G"))
-@end example
+@end lisp
 @end deffn
 
 At the core of the service abstraction lies the @code{fold-services}
@@ -26253,9 +26253,9 @@ The type of the @file{/etc} service.  This service is used to create
 files under @file{/etc} and can be extended by
 passing it name/file tuples such as:
 
-@example
+@lisp
 (list `("issue" ,(plain-file "issue" "Welcome!\n")))
-@end example
+@end lisp
 
 In this example, the effect would be to add an @file{/etc/issue} file
 pointing to the given file.
@@ -26391,7 +26391,7 @@ shepherd, The GNU Shepherd Manual}).
 The following example defines an action called @code{say-hello} that kindly
 greets the user:
 
-@example
+@lisp
 (shepherd-action
   (name 'say-hello)
   (documentation "Say hi!")
@@ -26399,7 +26399,7 @@ greets the user:
                  (format #t "Hello, friend! arguments: ~s\n"
                          args)
                  #t)))
-@end example
+@end lisp
 
 Assuming this action is added to the @code{example} service, then you can do:
 
@@ -26606,13 +26606,13 @@ Bash, say @code{bash-fixed}, in the usual way (@pxref{Defining
 Packages}).  Then, the original package definition is augmented with a
 @code{replacement} field pointing to the package containing the bug fix:
 
-@example
+@lisp
 (define bash
   (package
     (name "bash")
     ;; @dots{}
     (replacement bash-fixed)))
-@end example
+@end lisp
 
 From there on, any package depending directly or indirectly on Bash---as
 reported by @command{guix gc --requisites} (@pxref{Invoking guix