diff options
author | Vagrant Cascadian <vagrant@debian.org> | 2020-03-25 18:59:25 -0700 |
---|---|---|
committer | Vagrant Cascadian <vagrant@debian.org> | 2020-03-25 18:59:25 -0700 |
commit | 730a4b10fa49d821e0a89af59485cecf8616cd50 (patch) | |
tree | 9569203cdb6e2f19b00fa578ed5f1ecaa3c8d321 /gnu/packages/patches/linux-libre-support-for-Pinebook-Pro.patch | |
parent | 2a57b72251042b819f0822c870c3837f63957d9e (diff) | |
download | guix-730a4b10fa49d821e0a89af59485cecf8616cd50.tar.gz |
gnu: linux-libre-5.4-source: Add patch to support pinebook pro.
* gnu/packages/patches/linux-libre-support-for-Pinebook-Pro.patch: New file. * gnu/local.mk (dist_patch_DATA): Update accordingly. * gnu/packages/linux (linux-libre-5.4-source): Add patch.
Diffstat (limited to 'gnu/packages/patches/linux-libre-support-for-Pinebook-Pro.patch')
-rw-r--r-- | gnu/packages/patches/linux-libre-support-for-Pinebook-Pro.patch | 1135 |
1 files changed, 1135 insertions, 0 deletions
diff --git a/gnu/packages/patches/linux-libre-support-for-Pinebook-Pro.patch b/gnu/packages/patches/linux-libre-support-for-Pinebook-Pro.patch new file mode 100644 index 0000000000..659e10cba6 --- /dev/null +++ b/gnu/packages/patches/linux-libre-support-for-Pinebook-Pro.patch @@ -0,0 +1,1135 @@ +From d87a8072e8129a579246d8d31a591ca2aec05275 Mon Sep 17 00:00:00 2001 +From: Tobias Schramm <t.schramm@manjaro.org> +Date: Wed, 4 Mar 2020 22:30:23 +0100 +Subject: [PATCH] arm64: dts: rockchip: Add initial support for Pinebook Pro + +This commit adds initial dt support for the rk3399 based Pinebook Pro. + +Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> +Link: https://lore.kernel.org/r/20200304213023.689983-3-t.schramm@manjaro.org +Signed-off-by: Heiko Stuebner <heiko@sntech.de> + +Taken from next-20200313 commit 5a65505a6988443b211d3bf3f5bb5b79907c33b9 +--- + arch/arm64/boot/dts/rockchip/Makefile | 1 + + .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 1096 +++++++++++++++++ + 2 files changed, 1097 insertions(+) + create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts + +diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile +index 1f18a9392d15..7de9b61d6415 100644 +--- a/arch/arm64/boot/dts/rockchip/Makefile ++++ b/arch/arm64/boot/dts/rockchip/Makefile +@@ -25,6 +25,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb ++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb +diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +new file mode 100644 +index 000000000000..5ea281b55fe2 +--- /dev/null ++++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +@@ -0,0 +1,1096 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. ++ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> ++ * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org> ++ */ ++ ++/dts-v1/; ++#include <dt-bindings/input/gpio-keys.h> ++#include <dt-bindings/input/linux-event-codes.h> ++#include <dt-bindings/pwm/pwm.h> ++#include <dt-bindings/usb/pd.h> ++#include <dt-bindings/leds/common.h> ++#include "rk3399.dtsi" ++#include "rk3399-opp.dtsi" ++ ++/ { ++ model = "Pine64 Pinebook Pro"; ++ compatible = "pine64,pinebook-pro", "rockchip,rk3399"; ++ ++ chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ backlight: edp-backlight { ++ compatible = "pwm-backlight"; ++ power-supply = <&vcc_12v>; ++ pwms = <&pwm0 0 740740 0>; ++ }; ++ ++ edp_panel: edp-panel { ++ compatible = "boe,nv140fhmn49"; ++ backlight = <&backlight>; ++ enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&panel_en_gpio>; ++ power-supply = <&vcc3v3_panel>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ panel_in_edp: endpoint@0 { ++ reg = <0>; ++ remote-endpoint = <&edp_out_panel>; ++ }; ++ }; ++ }; ++ }; ++ ++ /* ++ * Use separate nodes for gpio-keys to allow for selective deactivation ++ * of wakeup sources via sysfs without disabling the whole key ++ */ ++ gpio-key-lid { ++ compatible = "gpio-keys"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lidbtn_gpio>; ++ ++ lid { ++ debounce-interval = <20>; ++ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; ++ label = "Lid"; ++ linux,code = <SW_LID>; ++ linux,input-type = <EV_SW>; ++ wakeup-event-action = <EV_ACT_DEASSERTED>; ++ wakeup-source; ++ }; ++ }; ++ ++ gpio-key-power { ++ compatible = "gpio-keys"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwrbtn_gpio>; ++ ++ power { ++ debounce-interval = <20>; ++ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; ++ label = "Power"; ++ linux,code = <KEY_POWER>; ++ wakeup-source; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwrled_gpio &slpled_gpio>; ++ ++ green-led { ++ color = <LED_COLOR_ID_GREEN>; ++ default-state = "on"; ++ function = LED_FUNCTION_POWER; ++ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; ++ label = "green:power"; ++ }; ++ ++ red-led { ++ color = <LED_COLOR_ID_RED>; ++ default-state = "off"; ++ function = LED_FUNCTION_STANDBY; ++ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; ++ label = "red:standby"; ++ panic-indicator; ++ retain-state-suspended; ++ }; ++ }; ++ ++ /* Power sequence for SDIO WiFi module */ ++ sdio_pwrseq: sdio-pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ clocks = <&rk808 1>; ++ clock-names = "ext_clock"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&wifi_enable_h_gpio>; ++ post-power-on-delay-ms = <100>; ++ power-off-delay-us = <500000>; ++ ++ /* WL_REG_ON on module */ ++ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; ++ }; ++ ++ /* Audio components */ ++ es8316-sound { ++ compatible = "simple-audio-card"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hp_det_gpio>; ++ simple-audio-card,name = "rockchip,es8316-codec"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,mclk-fs = <256>; ++ ++ simple-audio-card,widgets = ++ "Microphone", "Mic Jack", ++ "Headphone", "Headphones", ++ "Speaker", "Speaker"; ++ simple-audio-card,routing = ++ "MIC1", "Mic Jack", ++ "Headphones", "HPOL", ++ "Headphones", "HPOR", ++ "Speaker Amplifier INL", "HPOL", ++ "Speaker Amplifier INR", "HPOR", ++ "Speaker", "Speaker Amplifier OUTL", ++ "Speaker", "Speaker Amplifier OUTR"; ++ ++ simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; ++ simple-audio-card,aux-devs = <&speaker_amp>; ++ simple-audio-card,pin-switches = "Speaker"; ++ ++ simple-audio-card,cpu { ++ sound-dai = <&i2s1>; ++ }; ++ ++ simple-audio-card,codec { ++ sound-dai = <&es8316>; ++ }; ++ }; ++ ++ speaker_amp: speaker-amplifier { ++ compatible = "simple-audio-amplifier"; ++ enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; ++ sound-name-prefix = "Speaker Amplifier"; ++ VCC-supply = <&pa_5v>; ++ }; ++ ++ /* Power tree */ ++ /* Root power source */ ++ vcc_sysin: vcc-sysin { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_sysin"; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ /* Regulators supplied by vcc_sysin */ ++ /* LCD backlight supply */ ++ vcc_12v: vcc-12v { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_12v"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <12000000>; ++ regulator-max-microvolt = <12000000>; ++ vin-supply = <&vcc_sysin>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* Main 3.3 V supply */ ++ vcc3v3_sys: wifi_bat: vcc3v3-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc_sysin>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ /* 5 V USB power supply */ ++ vcc5v0_usb: pa_5v: vcc5v0-usb-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwr_5v_gpio>; ++ regulator-name = "vcc5v0_usb"; ++ regulator-always-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc_sysin>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* RK3399 logic supply */ ++ vdd_log: vdd-log { ++ compatible = "pwm-regulator"; ++ pwms = <&pwm2 0 25000 1>; ++ regulator-name = "vdd_log"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1400000>; ++ vin-supply = <&vcc_sysin>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ /* Regulators supplied by vcc3v3_sys */ ++ /* 0.9 V supply, always on */ ++ vcc_0v9: vcc-0v9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_0v9"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ vin-supply = <&vcc3v3_sys>; ++ }; ++ ++ /* S3 1.8 V supply, switched by vcc1v8_s3 */ ++ vcca1v8_s3: vcc1v8-s3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcca1v8_s3"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ vin-supply = <&vcc3v3_sys>; ++ }; ++ ++ /* micro SD card power */ ++ vcc3v0_sd: vcc3v0-sd { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc0_pwr_h_gpio>; ++ regulator-name = "vcc3v0_sd"; ++ regulator-always-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ vin-supply = <&vcc3v3_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* LCD panel power, called VCC3V3_S0 in schematic */ ++ vcc3v3_panel: vcc3v3-panel { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lcdvcc_en_gpio>; ++ regulator-name = "vcc3v3_panel"; ++ regulator-always-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-enable-ramp-delay = <100000>; ++ vin-supply = <&vcc3v3_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* M.2 adapter power, switched by vcc1v8_s3 */ ++ vcc3v3_ssd: vcc3v3-ssd { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_ssd"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc3v3_sys>; ++ }; ++ ++ /* Regulators supplied by vcc5v0_usb */ ++ /* USB 3 port power supply regulator */ ++ vcc5v0_otg: vcc5v0-otg { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc5v0_host_en_gpio>; ++ regulator-name = "vcc5v0_otg"; ++ regulator-always-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_usb>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* Regulators supplied by vcc5v0_usb */ ++ /* Type C port power supply regulator */ ++ vbus_5vout: vbus_typec: vbus-5vout { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc5v0_typec0_en_gpio>; ++ regulator-name = "vbus_5vout"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_usb>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* Regulators supplied by vcc_1v8 */ ++ /* Primary 0.9 V LDO */ ++ vcca0v9_s3: vcca0v9-s3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc0v9_s3"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc_1v8>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ mains_charger: dc-charger { ++ compatible = "gpio-charger"; ++ charger-type = "mains"; ++ gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>; ++ ++ /* Also triggered by USB charger */ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dc_det_gpio>; ++ }; ++}; ++ ++&cdn_dp { ++ status = "okay"; ++}; ++ ++&cpu_b0 { ++ cpu-supply = <&vdd_cpu_b>; ++}; ++ ++&cpu_b1 { ++ cpu-supply = <&vdd_cpu_b>; ++}; ++ ++&cpu_l0 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l1 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l2 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l3 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&edp { ++ force-hpd; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&edp_hpd>; ++ status = "okay"; ++ ++ ports { ++ edp_out: port@1 { ++ reg = <1>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ edp_out_panel: endpoint@0 { ++ reg = <0>; ++ remote-endpoint = <&panel_in_edp>; ++ }; ++ }; ++ }; ++}; ++ ++&emmc_phy { ++ status = "okay"; ++}; ++ ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&hdmi_sound { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ clock-frequency = <400000>; ++ i2c-scl-falling-time-ns = <4>; ++ i2c-scl-rising-time-ns = <168>; ++ status = "okay"; ++ ++ rk808: pmic@1b { ++ compatible = "rockchip,rk808"; ++ reg = <0x1b>; ++ #clock-cells = <1>; ++ clock-output-names = "xin32k", "rk808-clkout2"; ++ interrupt-parent = <&gpio3>; ++ interrupts = <10 IRQ_TYPE_LEVEL_LOW>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int_l_gpio>; ++ rockchip,system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc_sysin>; ++ vcc2-supply = <&vcc_sysin>; ++ vcc3-supply = <&vcc_sysin>; ++ vcc4-supply = <&vcc_sysin>; ++ vcc6-supply = <&vcc_sysin>; ++ vcc7-supply = <&vcc_sysin>; ++ vcc8-supply = <&vcc3v3_sys>; ++ vcc9-supply = <&vcc_sysin>; ++ vcc10-supply = <&vcc_sysin>; ++ vcc11-supply = <&vcc_sysin>; ++ vcc12-supply = <&vcc3v3_sys>; ++ vcc13-supply = <&vcc_sysin>; ++ vcc14-supply = <&vcc_sysin>; ++ ++ regulators { ++ /* rk3399 center logic supply */ ++ vdd_center: DCDC_REG1 { ++ regulator-name = "vdd_center"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_cpu_l: DCDC_REG2 { ++ regulator-name = "vdd_cpu_l"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vcc_1v8: vcc_wl: DCDC_REG4 { ++ regulator-name = "vcc_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ /* not used */ ++ LDO_REG1 { ++ }; ++ ++ /* not used */ ++ LDO_REG2 { ++ }; ++ ++ vcc1v8_pmupll: LDO_REG3 { ++ regulator-name = "vcc1v8_pmupll"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc_sdio: LDO_REG4 { ++ regulator-name = "vcc_sdio"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3000000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3000000>; ++ }; ++ }; ++ ++ vcca3v0_codec: LDO_REG5 { ++ regulator-name = "vcca3v0_codec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_1v5: LDO_REG6 { ++ regulator-name = "vcc_1v5"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1500000>; ++ }; ++ }; ++ ++ vcca1v8_codec: LDO_REG7 { ++ regulator-name = "vcca1v8_codec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_3v0: LDO_REG8 { ++ regulator-name = "vcc_3v0"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3000000>; ++ }; ++ }; ++ ++ vcc3v3_s3: SWITCH_REG1 { ++ regulator-name = "vcc3v3_s3"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_s0: SWITCH_REG2 { ++ regulator-name = "vcc3v3_s0"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ }; ++ }; ++ ++ vdd_cpu_b: regulator@40 { ++ compatible = "silergy,syr827"; ++ reg = <0x40>; ++ fcs,suspend-voltage-selector = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vsel1_gpio>; ++ regulator-name = "vdd_cpu_b"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1500000>; ++ regulator-ramp-delay = <1000>; ++ vin-supply = <&vcc_1v8>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_gpu: regulator@41 { ++ compatible = "silergy,syr828"; ++ reg = <0x41>; ++ fcs,suspend-voltage-selector = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vsel2_gpio>; ++ regulator-name = "vdd_gpu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1500000>; ++ regulator-ramp-delay = <1000>; ++ vin-supply = <&vcc_1v8>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++}; ++ ++&i2c1 { ++ clock-frequency = <100000>; ++ i2c-scl-falling-time-ns = <4>; ++ i2c-scl-rising-time-ns = <168>; ++ status = "okay"; ++ ++ es8316: es8316@11 { ++ compatible = "everest,es8316"; ++ reg = <0x11>; ++ clocks = <&cru SCLK_I2S_8CH_OUT>; ++ clock-names = "mclk"; ++ #sound-dai-cells = <0>; ++ }; ++}; ++ ++&i2c3 { ++ i2c-scl-falling-time-ns = <15>; ++ i2c-scl-rising-time-ns = <450>; ++ status = "okay"; ++}; ++ ++&i2c4 { ++ i2c-scl-falling-time-ns = <20>; ++ i2c-scl-rising-time-ns = <600>; ++ status = "okay"; ++ ++ fusb0: fusb30x@22 { ++ compatible = "fcs,fusb302"; ++ reg = <0x22>; ++ fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&fusb0_int_gpio>; ++ vbus-supply = <&vbus_typec>; ++ ++ connector { ++ compatible = "usb-c-connector"; ++ data-role = "host"; ++ label = "USB-C"; ++ op-sink-microwatt = <1000000>; ++ power-role = "dual"; ++ sink-pdos = ++ <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; ++ source-pdos = ++ <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; ++ try-power-role = "sink"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ ++ usbc_hs: endpoint { ++ remote-endpoint = ++ <&u2phy0_typec_hs>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ ++ usbc_ss: endpoint { ++ remote-endpoint = ++ <&tcphy0_typec_ss>; ++ }; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ ++ usbc_dp: endpoint { ++ remote-endpoint = ++ <&tcphy0_typec_dp>; ++ }; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2s1 { ++ #sound-dai-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>; ++ rockchip,capture-channels = <8>; ++ rockchip,playback-channels = <8>; ++ status = "okay"; ++}; ++ ++&io_domains { ++ audio-supply = <&vcc_3v0>; ++ gpio1830-supply = <&vcc_3v0>; ++ sdmmc-supply = <&vcc_sdio>; ++ status = "okay"; ++}; ++ ++&pcie_phy { ++ status = "okay"; ++}; ++ ++&pcie0 { ++ bus-scan-delay-ms = <1000>; ++ ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; ++ max-link-speed = <2>; ++ num-lanes = <4>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_clkreqn_cpm>; ++ vpcie0v9-supply = <&vcca0v9_s3>; ++ vpcie1v8-supply = <&vcca1v8_s3>; ++ vpcie3v3-supply = <&vcc3v3_ssd>; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ buttons { ++ pwrbtn_gpio: pwrbtn-gpio { ++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ ++ lidbtn_gpio: lidbtn-gpio { ++ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ dc-charger { ++ dc_det_gpio: dc-det-gpio { ++ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ es8316 { ++ hp_det_gpio: hp-det-gpio { ++ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ }; ++ ++ fusb302x { ++ fusb0_int_gpio: fusb0-int-gpio { ++ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ i2s1 { ++ i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio { ++ rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; ++ }; ++ }; ++ ++ lcd-panel { ++ lcdvcc_en_gpio: lcdvcc-en-gpio { ++ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ panel_en_gpio: panel-en-gpio { ++ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ lcd_panel_reset_gpio: lcd-panel-reset-gpio { ++ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ leds { ++ pwrled_gpio: pwrled_gpio { ++ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ slpled_gpio: slpled_gpio { ++ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pmic { ++ pmic_int_l_gpio: pmic-int-l-gpio { ++ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ ++ vsel1_gpio: vsel1-gpio { ++ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ ++ vsel2_gpio: vsel2-gpio { ++ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ }; ++ ++ sdcard { ++ sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio { ++ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ }; ++ ++ sdio-pwrseq { ++ wifi_enable_h_gpio: wifi-enable-h-gpio { ++ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ usb-typec { ++ vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio { ++ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ usb2 { ++ pwr_5v_gpio: pwr-5v-gpio { ++ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ vcc5v0_host_en_gpio: vcc5v0-host-en-gpio { ++ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ wireless-bluetooth { ++ bt_wake_gpio: bt-wake-gpio { ++ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ bt_host_wake_gpio: bt-host-wake-gpio { ++ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ bt_reset_gpio: bt-reset-gpio { ++ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; ++ ++&pmu_io_domains { ++ pmu1830-supply = <&vcc_3v0>; ++ status = "okay"; ++}; ++ ++&pwm0 { ++ status = "okay"; ++}; ++ ++&pwm2 { ++ status = "okay"; ++}; ++ ++&saradc { ++ vref-supply = <&vcca1v8_s3>; ++ status = "okay"; ++}; ++ ++&sdmmc { ++ bus-width = <4>; ++ cap-mmc-highspeed; ++ cap-sd-highspeed; ++ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; ++ disable-wp; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; ++ sd-uhs-sdr104; ++ vmmc-supply = <&vcc3v0_sd>; ++ vqmmc-supply = <&vcc_sdio>; ++ status = "okay"; ++}; ++ ++&sdio0 { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ cap-sdio-irq; ++ keep-power-in-suspend; ++ mmc-pwrseq = <&sdio_pwrseq>; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; ++ sd-uhs-sdr104; ++ status = "okay"; ++}; ++ ++&sdhci { ++ bus-width = <8>; ++ mmc-hs200-1_8v; ++ non-removable; ++ status = "okay"; ++}; ++ ++&spi1 { ++ max-freq = <10000000>; ++ status = "okay"; ++ ++ spiflash: flash@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ m25p,fast-read; ++ spi-max-frequency = <10000000>; ++ }; ++}; ++ ++&tcphy0 { ++ status = "okay"; ++}; ++ ++&tcphy0_dp { ++ port { ++ tcphy0_typec_dp: endpoint { ++ remote-endpoint = <&usbc_dp>; ++ }; ++ }; ++}; ++ ++&tcphy0_usb3 { ++ port { ++ tcphy0_typec_ss: endpoint { ++ remote-endpoint = <&usbc_ss>; ++ }; ++ }; ++}; ++ ++&tcphy1 { ++ status = "okay"; ++}; ++ ++&tsadc { ++ /* tshut mode 0:CRU 1:GPIO */ ++ rockchip,hw-tshut-mode = <1>; ++ /* tshut polarity 0:LOW 1:HIGH */ ++ rockchip,hw-tshut-polarity = <1>; ++ status = "okay"; ++}; ++ ++&u2phy0 { ++ status = "okay"; ++ ++ u2phy0_otg: otg-port { ++ status = "okay"; ++ }; ++ ++ u2phy0_host: host-port { ++ phy-supply = <&vcc5v0_otg>; ++ status = "okay"; ++ }; ++ ++ port { ++ u2phy0_typec_hs: endpoint { ++ remote-endpoint = <&usbc_hs>; ++ }; ++ }; ++}; ++ ++&u2phy1 { ++ status = "okay"; ++ ++ u2phy1_otg: otg-port { ++ status = "okay"; ++ }; ++ ++ u2phy1_host: host-port { ++ phy-supply = <&vcc5v0_otg>; ++ status = "okay"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; ++ uart-has-rtscts; ++ status = "okay"; ++ ++ bluetooth { ++ compatible = "brcm,bcm4345c5"; ++ clocks = <&rk808 1>; ++ clock-names = "lpo"; ++ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; ++ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; ++ max-speed = <1500000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>; ++ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; ++ vbat-supply = <&wifi_bat>; ++ vddio-supply = <&vcc_wl>; ++ }; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; ++ ++&usb_host1_ehci { ++ status = "okay"; ++}; ++ ++&usb_host1_ohci { ++ status = "okay"; ++}; ++ ++&usbdrd3_0 { ++ status = "okay"; ++}; ++ ++&usbdrd_dwc3_0 { ++ dr_mode = "host"; ++ status = "okay"; ++}; ++ ++&usbdrd3_1 { ++ status = "okay"; ++}; ++ ++&usbdrd_dwc3_1 { ++ dr_mode = "host"; ++ status = "okay"; ++}; ++ ++&vopb { ++ status = "okay"; ++}; ++ ++&vopb_mmu { ++ status = "okay"; ++}; ++ ++&vopl { ++ status = "okay"; ++}; ++ ++&vopl_mmu { ++ status = "okay"; ++}; +-- +2.25.1 + |