gnu: u-boot: Update to 2019.01.

* gnu/packages/bootloaders.scm (u-boot): Update to 2019.01.
(u-boot-tools): Disable CONFIG_SOUND in sandbox configs.
(u-boot-pinebook)[source]: Remove patches.
* gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch,
gnu/packages/patches/u-boot-pinebook-dts.patch,
gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch,
gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch,
gnu/packages/patches/u-boot-pinebook-syscon-node.patch,
gnu/packages/patches/u-boot-pinebook-video-bridge.patch: Delete files.
* gnu/local.mk (dist_patch_DATA): Adjust as necessary.

6 files changed, 0 insertions, 2129 deletions

diff --git a/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch b/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch
deleted file mode 100644
index 9d0a08c8bf..0000000000
--- a/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch
+++ /dev/null
@@ -1,1485 +0,0 @@
-From 1b39a1834ed182bbd8036a5cd74a9ea111fa4691 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Mon, 29 Oct 2018 00:56:47 +0000
-Subject: [PATCH 03/13] sunxi: A64: Update .dts/.dtsi files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Update the .dts/.dtsi file from the Linux sunxi/dt64-for-4.20 tree:
-commit 679294497be31596e1c9c61507746d72b6b05f26
-Author: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz>
-Date:   Wed Sep 26 19:48:24 2018 +0000
-    arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Reviewed-by: Jagan Teki <jagan@openedev.com>
----
- arch/arm/dts/sun50i-a64-amarula-relic.dts    | 168 +++++++++++++-
- arch/arm/dts/sun50i-a64-bananapi-m64.dts     |  34 ++-
- arch/arm/dts/sun50i-a64-nanopi-a64.dts       |  89 +++++++-
- arch/arm/dts/sun50i-a64-olinuxino.dts        | 103 ++++++++-
- arch/arm/dts/sun50i-a64-orangepi-win.dts     | 179 ++++++++++++++-
- arch/arm/dts/sun50i-a64-pine64.dts           |  32 ++-
- arch/arm/dts/sun50i-a64-sopine-baseboard.dts |  32 ++-
- arch/arm/dts/sun50i-a64-sopine.dtsi          |  15 ++
- arch/arm/dts/sun50i-a64.dtsi                 | 313 +++++++++++++++++++++++++--
- 9 files changed, 920 insertions(+), 45 deletions(-)
-
-diff --git a/arch/arm/dts/sun50i-a64-amarula-relic.dts b/arch/arm/dts/sun50i-a64-amarula-relic.dts
-index f3b4e93ece..6cb2b7f0c8 100644
---- a/arch/arm/dts/sun50i-a64-amarula-relic.dts
-+++ b/arch/arm/dts/sun50i-a64-amarula-relic.dts
-@@ -22,11 +22,11 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
--	reg_vcc3v3: vcc3v3 {
--		compatible = "regulator-fixed";
--		regulator-name = "vcc3v3";
--		regulator-min-microvolt = <3300000>;
--		regulator-max-microvolt = <3300000>;
-+	wifi_pwrseq: wifi-pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		clocks = <&rtc 1>;
-+		clock-names = "ext_clock";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
- 	};
- };
- 
-@@ -34,10 +34,34 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	/*
-+	 * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
-+	 * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
-+	 * 0Ohm register to vcc-io-wifi so eldo1 is used.
-+	 */
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	brcmf: wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&r_pio>;
-+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;	/* WL-WAKE-AP: PL3 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
- &mmc2 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc2_pins>;
--	vmmc-supply = <&reg_vcc3v3>;
-+	vmmc-supply = <&reg_dcdc1>;
- 	bus-width = <8>;
- 	non-removable;
- 	cap-mmc-hw-reset;
-@@ -48,9 +72,138 @@
- 	status = "okay";
- };
- 
-+&r_rsb {
-+	status = "okay";
-+
-+	axp803: pmic@3a3 {
-+		compatible = "x-powers,axp803";
-+		reg = <0x3a3>;
-+		interrupt-parent = <&r_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
-+	};
-+};
-+
-+#include "axp803.dtsi"
-+
-+&reg_aldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
-+	regulator-name = "avdd-csi";
-+};
-+
-+&reg_aldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pl";
-+};
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3000000>;
-+	regulator-max-microvolt = <3000000>;
-+	regulator-name = "vcc-pll-avcc";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-3v3";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1040000>;
-+	regulator-max-microvolt = <1300000>;
-+	regulator-name = "vdd-cpux";
-+};
-+
-+/* DCDC3 is polyphased with DCDC2 */
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1500000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+&reg_dcdc6 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1100000>;
-+	regulator-max-microvolt = <1100000>;
-+	regulator-name = "vdd-sys";
-+};
-+
-+&reg_dldo1 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-hdmi-dsi-sensor";
-+};
-+
-+&reg_dldo2 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-mipi";
-+};
-+
-+&reg_dldo3 {
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
-+	regulator-name = "dovdd-csi";
-+};
-+
-+&reg_dldo4 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-wifi-io";
-+};
-+
-+&reg_drivevbus {
-+	regulator-name = "usb0-vbus";
-+	status = "okay";
-+};
-+
-+&reg_eldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "cpvdd";
-+};
-+
-+&reg_eldo3 {
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "dvdd-csi";
-+};
-+
-+&reg_fldo1 {
-+	regulator-min-microvolt = <1200000>;
-+	regulator-max-microvolt = <1200000>;
-+	regulator-name = "vcc-1v2-hsic";
-+};
-+
-+/*
-+ * The A64 chip cannot work without this regulator off, although
-+ * it seems to be only driving the AR100 core.
-+ * Maybe we don't still know well about CPUs domain.
-+ */
-+&reg_fldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1100000>;
-+	regulator-max-microvolt = <1100000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_rtc_ldo {
-+	regulator-name = "vcc-rtc";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
-@@ -61,5 +214,6 @@
- 
- &usbphy {
- 	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+	usb0_vbus-supply = <&reg_drivevbus>;
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-index 0716b14411..ef1c90401b 100644
---- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-@@ -60,6 +60,17 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -86,6 +97,10 @@
- 	};
- };
- 
-+&de {
-+	status = "okay";
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -103,6 +118,17 @@
- 	status = "okay";
- };
- 
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- &i2c1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins>;
-@@ -151,7 +177,7 @@
- 
- &mmc2 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&mmc2_pins>;
-+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
- 	vmmc-supply = <&reg_dcdc1>;
- 	bus-width = <8>;
- 	non-removable;
-@@ -296,9 +322,13 @@
- 	regulator-name = "vcc-rtc";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-index e2dce48fa2..31884dbc88 100644
---- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-+++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-@@ -51,12 +51,44 @@
- 	compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 	};
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		blue {
-+			label = "nanopi-a64:blue:status";
-+			gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
-+		};
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		clocks = <&rtc 1>;
-+		clock-names = "ext_clock";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+	};
-+};
-+
-+&de {
-+	status = "okay";
- };
- 
- &ehci0 {
-@@ -67,6 +99,26 @@
- 	status = "okay";
- };
- 
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-supply = <&reg_dcdc1>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- /* i2c1 connected with gpio headers like pine64, bananapi */
- &i2c1 {
- 	pinctrl-names = "default";
-@@ -78,6 +130,13 @@
- 	bias-pull-up;
- };
- 
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins>;
-@@ -88,6 +147,24 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	vqmmc-supply = <&reg_dldo4>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8189etv: wifi@1 {
-+		reg = <1>;
-+		interrupt-parent = <&r_pio>;
-+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
- &ohci0 {
- 	status = "okay";
- };
-@@ -125,9 +202,9 @@
- 
- &reg_dcdc1 {
- 	regulator-always-on;
--	regulator-min-microvolt = <3000000>;
--	regulator-max-microvolt = <3000000>;
--	regulator-name = "vcc-3v";
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-3v3";
- };
- 
- &reg_dcdc2 {
-@@ -195,9 +272,13 @@
- 	regulator-name = "vcc-rtc";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts
-index 3b3081b10e..f7a4bccaa5 100644
---- a/arch/arm/dts/sun50i-a64-olinuxino.dts
-+++ b/arch/arm/dts/sun50i-a64-olinuxino.dts
-@@ -51,6 +51,7 @@
- 	compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 	};
- 
-@@ -58,12 +59,74 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
-+	reg_usb1_vbus: usb1-vbus {
-+		compatible = "regulator-fixed";
-+		regulator-name = "usb1-vbus";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		regulator-boot-on;
-+		enable-active-high;
-+		gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
-+		status = "okay";
-+	};
-+
- 	wifi_pwrseq: wifi_pwrseq {
- 		compatible = "mmc-pwrseq-simple";
- 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
- 	};
- };
- 
-+&de {
-+	status = "okay";
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-supply = <&reg_dcdc1>;
-+	allwinner,tx-delay-ps = <600>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins>;
-@@ -92,6 +155,14 @@
- 	};
- };
- 
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
- &r_rsb {
- 	status = "okay";
- 
-@@ -100,6 +171,7 @@
- 		reg = <0x3a3>;
- 		interrupt-parent = <&r_intc>;
- 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+		x-powers,drive-vbus-en;	/* set N_VBUSEN as output pin */
- 	};
- };
- 
-@@ -142,10 +214,14 @@
- 
- /* DCDC3 is polyphased with DCDC2 */
- 
-+/*
-+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
-+ * 1.35V that the PMIC can drive.
-+ */
- &reg_dcdc5 {
- 	regulator-always-on;
--	regulator-min-microvolt = <1500000>;
--	regulator-max-microvolt = <1500000>;
-+	regulator-min-microvolt = <1360000>;
-+	regulator-max-microvolt = <1360000>;
- 	regulator-name = "vcc-ddr3";
- };
- 
-@@ -180,6 +256,11 @@
- 	regulator-name = "vcc-wifi-io";
- };
- 
-+&reg_drivevbus {
-+	regulator-name = "usb0-vbus";
-+	status = "okay";
-+};
-+
- &reg_eldo1 {
- 	regulator-min-microvolt = <1800000>;
- 	regulator-max-microvolt = <1800000>;
-@@ -214,8 +295,24 @@
- 	regulator-name = "vcc-rtc";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
-+&usbphy {
- 	status = "okay";
-+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+	usb0_vbus-supply = <&reg_drivevbus>;
-+	usb1_vbus-supply = <&reg_usb1_vbus>;
- };
-diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts
-index bf42690a33..b0c64f7579 100644
---- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
-+++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
-@@ -1,5 +1,6 @@
- /*
-  * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
-+ * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
-  *
-  * This file is dual-licensed: you can use it either under the terms
-  * of the GPL or the X11 license, at your option. Note that this dual
-@@ -51,23 +52,127 @@
- 	compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
-+		serial1 = &uart1;
-+		serial2 = &uart2;
-+		serial3 = &uart3;
-+		serial4 = &uart4;
- 	};
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		status {
-+			label = "orangepi:green:status";
-+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-+		};
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-boot-on;
-+		enable-active-high;
-+		gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
-+		status = "okay";
-+	};
-+
-+	reg_usb1_vbus: usb1-vbus {
-+		compatible = "regulator-fixed";
-+		regulator-name = "usb1-vbus";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		regulator-boot-on;
-+		enable-active-high;
-+		gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
-+		status = "okay";
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
-+	};
-+};
-+
-+&de {
-+	status = "okay";
-+};
-+
-+&ehci0 {
-+	status = "okay";
- };
- 
- &ehci1 {
- 	status = "okay";
- };
- 
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins>;
- 	vmmc-supply = <&reg_dcdc1>;
--	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-+	disable-wp;
-+	bus-width = <4>;
-+	status = "okay";
-+};
-+
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo2>;
-+	vqmmc-supply = <&reg_dldo4>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&ohci0 {
- 	status = "okay";
- };
- 
-@@ -89,9 +194,8 @@
- #include "axp803.dtsi"
- 
- &reg_aldo1 {
--	regulator-always-on;
--	regulator-min-microvolt = <1800000>;
--	regulator-max-microvolt = <3300000>;
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
- 	regulator-name = "afvcc-csi";
- };
- 
-@@ -163,12 +267,23 @@
- 	regulator-name = "vcc-wifi-io";
- };
- 
-+&reg_drivevbus {
-+	regulator-name = "usb0-vbus";
-+	status = "okay";
-+};
-+
- &reg_eldo1 {
- 	regulator-min-microvolt = <1800000>;
- 	regulator-max-microvolt = <1800000>;
- 	regulator-name = "cpvdd";
- };
- 
-+&reg_eldo3 {
-+	regulator-min-microvolt = <1500000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "dvdd-csi";
-+};
-+
- &reg_fldo1 {
- 	regulator-min-microvolt = <1200000>;
- 	regulator-max-microvolt = <1200000>;
-@@ -191,13 +306,65 @@
- 	regulator-name = "vcc-rtc";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
-+&spi0 {
-+	status = "okay";
-+
-+	spi-flash@0 {
-+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <80000000>;
-+		m25p,fast-read;
-+		status = "okay";
-+	};
-+};
-+
-+/* On debug connector */
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
--&usbphy {
-+/* Bluetooth */
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
-+	status = "okay";
-+};
-+
-+/* On Pi-2 connector, RTS/CTS optional */
-+&uart2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart2_pins>;
-+	status = "disabled";
-+};
-+
-+/* On Pi-2 connector, RTS/CTS optional */
-+&uart3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart3_pins>;
-+	status = "disabled";
-+};
-+
-+/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
-+&uart4 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart4_pins>;
-+	status = "disabled";
-+};
-+
-+&usb_otg {
-+	dr_mode = "otg";
- 	status = "okay";
- };
- 
-+&usbphy {
-+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+	usb0_vbus-supply = <&reg_drivevbus>;
-+	usb1_vbus-supply = <&reg_usb1_vbus>;
-+	status = "okay";
-+};
-diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts
-index a75825798a..c077b6c1f4 100644
---- a/arch/arm/dts/sun50i-a64-pine64.dts
-+++ b/arch/arm/dts/sun50i-a64-pine64.dts
-@@ -62,6 +62,21 @@
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-+
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+};
-+
-+&de {
-+	status = "okay";
- };
- 
- &ehci0 {
-@@ -82,6 +97,17 @@
- 
- };
- 
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- &i2c1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins>;
-@@ -229,6 +255,10 @@
- 	regulator-name = "vcc-rtc";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
- /* On Euler connector */
- &spdif {
- 	status = "disabled";
-@@ -237,7 +267,7 @@
- /* On Exp and Euler connectors */
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-index abe179de35..53fcc9098d 100644
---- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-+++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-@@ -61,6 +61,17 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
-+	hdmi-connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
- 	reg_vcc1v8: vcc1v8 {
- 		compatible = "regulator-fixed";
- 		regulator-name = "vcc1v8";
-@@ -69,6 +80,10 @@
- 	};
- };
- 
-+&de {
-+	status = "okay";
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -86,6 +101,17 @@
- 	status = "okay";
- };
- 
-+&hdmi {
-+	hvcc-supply = <&reg_dldo1>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
- &mdio {
- 	ext_rgmii_phy: ethernet-phy@1 {
- 		compatible = "ethernet-phy-ieee802.3-c22";
-@@ -134,9 +160,13 @@
- 	regulator-name = "vcc-wifi";
- };
- 
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&uart0_pins_a>;
-+	pinctrl-0 = <&uart0_pb_pins>;
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-a64-sopine.dtsi b/arch/arm/dts/sun50i-a64-sopine.dtsi
-index 43418bd881..6723b8695e 100644
---- a/arch/arm/dts/sun50i-a64-sopine.dtsi
-+++ b/arch/arm/dts/sun50i-a64-sopine.dtsi
-@@ -45,6 +45,8 @@
- 
- #include "sun50i-a64.dtsi"
- 
-+#include <dt-bindings/gpio/gpio.h>
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins>;
-@@ -52,6 +54,7 @@
- 	non-removable;
- 	disable-wp;
- 	bus-width = <4>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- 	status = "okay";
- };
- 
-@@ -66,6 +69,18 @@
- 	};
- };
- 
-+&spi0  {
-+	status = "okay";
-+
-+	flash@0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <40000000>;
-+	};
-+};
-+
- #include "axp803.dtsi"
- 
- &reg_aldo2 {
-diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
-index 7a083637c4..f3a66f8882 100644
---- a/arch/arm/dts/sun50i-a64.dtsi
-+++ b/arch/arm/dts/sun50i-a64.dtsi
-@@ -43,9 +43,12 @@
-  */
- 
- #include <dt-bindings/clock/sun50i-a64-ccu.h>
-+#include <dt-bindings/clock/sun8i-de2.h>
- #include <dt-bindings/clock/sun8i-r-ccu.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/reset/sun50i-a64-ccu.h>
-+#include <dt-bindings/reset/sun8i-de2.h>
-+#include <dt-bindings/reset/sun8i-r-ccu.h>
- 
- / {
- 	interrupt-parent = <&gic>;
-@@ -57,17 +60,21 @@
- 		#size-cells = <1>;
- 		ranges;
- 
--/*
-- * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
-- * However there is no support for this clock on A64 yet, so we depend
-- * on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
-- */
- 		simplefb_lcd: framebuffer-lcd {
- 			compatible = "allwinner,simple-framebuffer",
- 				     "simple-framebuffer";
- 			allwinner,pipeline = "mixer0-lcd0";
- 			clocks = <&ccu CLK_TCON0>,
--				 <&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
-+				 <&display_clocks CLK_MIXER0>;
-+			status = "disabled";
-+		};
-+
-+		simplefb_hdmi: framebuffer-hdmi {
-+			compatible = "allwinner,simple-framebuffer",
-+				     "simple-framebuffer";
-+			allwinner,pipeline = "mixer1-lcd1-hdmi";
-+			clocks = <&display_clocks CLK_MIXER1>,
-+				 <&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
- 			status = "disabled";
- 		};
- 	};
-@@ -81,6 +88,7 @@
- 			device_type = "cpu";
- 			reg = <0>;
- 			enable-method = "psci";
-+			next-level-cache = <&L2>;
- 		};
- 
- 		cpu1: cpu@1 {
-@@ -88,6 +96,7 @@
- 			device_type = "cpu";
- 			reg = <1>;
- 			enable-method = "psci";
-+			next-level-cache = <&L2>;
- 		};
- 
- 		cpu2: cpu@2 {
-@@ -95,6 +104,7 @@
- 			device_type = "cpu";
- 			reg = <2>;
- 			enable-method = "psci";
-+			next-level-cache = <&L2>;
- 		};
- 
- 		cpu3: cpu@3 {
-@@ -102,7 +112,20 @@
- 			device_type = "cpu";
- 			reg = <3>;
- 			enable-method = "psci";
-+			next-level-cache = <&L2>;
- 		};
-+
-+		L2: l2-cache {
-+			compatible = "cache";
-+			cache-level = <2>;
-+		};
-+	};
-+
-+	de: display-engine {
-+		compatible = "allwinner,sun50i-a64-display-engine";
-+		allwinner,pipelines = <&mixer0>,
-+				      <&mixer1>;
-+		status = "disabled";
- 	};
- 
- 	osc24M: osc24M_clk {
-@@ -168,10 +191,92 @@
- 		#size-cells = <1>;
- 		ranges;
- 
-+		de2@1000000 {
-+			compatible = "allwinner,sun50i-a64-de2";
-+			reg = <0x1000000 0x400000>;
-+			allwinner,sram = <&de2_sram 1>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0 0x1000000 0x400000>;
-+
-+			display_clocks: clock@0 {
-+				compatible = "allwinner,sun50i-a64-de2-clk";
-+				reg = <0x0 0x100000>;
-+				clocks = <&ccu CLK_DE>,
-+					 <&ccu CLK_BUS_DE>;
-+				clock-names = "mod",
-+					      "bus";
-+				resets = <&ccu RST_BUS_DE>;
-+				#clock-cells = <1>;
-+				#reset-cells = <1>;
-+			};
-+
-+			mixer0: mixer@100000 {
-+				compatible = "allwinner,sun50i-a64-de2-mixer-0";
-+				reg = <0x100000 0x100000>;
-+				clocks = <&display_clocks CLK_BUS_MIXER0>,
-+					 <&display_clocks CLK_MIXER0>;
-+				clock-names = "bus",
-+					      "mod";
-+				resets = <&display_clocks RST_MIXER0>;
-+
-+				ports {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					mixer0_out: port@1 {
-+						reg = <1>;
-+
-+						mixer0_out_tcon0: endpoint {
-+							remote-endpoint = <&tcon0_in_mixer0>;
-+						};
-+					};
-+				};
-+			};
-+
-+			mixer1: mixer@200000 {
-+				compatible = "allwinner,sun50i-a64-de2-mixer-1";
-+				reg = <0x200000 0x100000>;
-+				clocks = <&display_clocks CLK_BUS_MIXER1>,
-+					 <&display_clocks CLK_MIXER1>;
-+				clock-names = "bus",
-+					      "mod";
-+				resets = <&display_clocks RST_MIXER1>;
-+
-+				ports {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					mixer1_out: port@1 {
-+						reg = <1>;
-+
-+						mixer1_out_tcon1: endpoint {
-+							remote-endpoint = <&tcon1_in_mixer1>;
-+						};
-+					};
-+				};
-+			};
-+		};
-+
- 		syscon: syscon@1c00000 {
--			compatible = "allwinner,sun50i-a64-system-controller",
--				"syscon";
-+			compatible = "allwinner,sun50i-a64-system-control";
- 			reg = <0x01c00000 0x1000>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges;
-+
-+			sram_c: sram@18000 {
-+				compatible = "mmio-sram";
-+				reg = <0x00018000 0x28000>;
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				ranges = <0 0x00018000 0x28000>;
-+
-+				de2_sram: sram-section@0 {
-+					compatible = "allwinner,sun50i-a64-sram-c";
-+					reg = <0x0000 0x28000>;
-+				};
-+			};
- 		};
- 
- 		dma: dma-controller@1c02000 {
-@@ -185,6 +290,75 @@
- 			#dma-cells = <1>;
- 		};
- 
-+		tcon0: lcd-controller@1c0c000 {
-+			compatible = "allwinner,sun50i-a64-tcon-lcd",
-+				     "allwinner,sun8i-a83t-tcon-lcd";
-+			reg = <0x01c0c000 0x1000>;
-+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
-+			clock-names = "ahb", "tcon-ch0";
-+			clock-output-names = "tcon-pixel-clock";
-+			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
-+			reset-names = "lcd", "lvds";
-+
-+			ports {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				tcon0_in: port@0 {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					reg = <0>;
-+
-+					tcon0_in_mixer0: endpoint@0 {
-+						reg = <0>;
-+						remote-endpoint = <&mixer0_out_tcon0>;
-+					};
-+				};
-+
-+				tcon0_out: port@1 {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					reg = <1>;
-+				};
-+			};
-+		};
-+
-+		tcon1: lcd-controller@1c0d000 {
-+			compatible = "allwinner,sun50i-a64-tcon-tv",
-+				     "allwinner,sun8i-a83t-tcon-tv";
-+			reg = <0x01c0d000 0x1000>;
-+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
-+			clock-names = "ahb", "tcon-ch1";
-+			resets = <&ccu RST_BUS_TCON1>;
-+			reset-names = "lcd";
-+
-+			ports {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				tcon1_in: port@0 {
-+					reg = <0>;
-+
-+					tcon1_in_mixer1: endpoint {
-+						remote-endpoint = <&mixer1_out_tcon1>;
-+					};
-+				};
-+
-+				tcon1_out: port@1 {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					reg = <1>;
-+
-+					tcon1_out_hdmi: endpoint@1 {
-+						reg = <1>;
-+						remote-endpoint = <&hdmi_in_tcon1>;
-+					};
-+				};
-+			};
-+		};
-+
- 		mmc0: mmc@1c0f000 {
- 			compatible = "allwinner,sun50i-a64-mmc";
- 			reg = <0x01c0f000 0x1000>;
-@@ -227,6 +401,11 @@
- 			#size-cells = <0>;
- 		};
- 
-+		sid: eeprom@1c14000 {
-+			compatible = "allwinner,sun50i-a64-sid";
-+			reg = <0x1c14000 0x400>;
-+		};
-+
- 		usb_otg: usb@1c19000 {
- 			compatible = "allwinner,sun8i-a33-musb";
- 			reg = <0x01c19000 0x0400>;
-@@ -356,7 +535,7 @@
- 			};
- 
- 			mmc2_pins: mmc2-pins {
--				pins = "PC1", "PC5", "PC6", "PC8", "PC9",
-+				pins = "PC5", "PC6", "PC8", "PC9",
- 				       "PC10","PC11", "PC12", "PC13",
- 				       "PC14", "PC15", "PC16";
- 				function = "mmc2";
-@@ -364,6 +543,18 @@
- 				bias-pull-up;
- 			};
- 
-+			mmc2_ds_pin: mmc2-ds-pin {
-+				pins = "PC1";
-+				function = "mmc2";
-+				drive-strength = <30>;
-+				bias-pull-up;
-+			};
-+
-+			pwm_pin: pwm_pin {
-+				pins = "PD22";
-+				function = "pwm";
-+			};
-+
- 			rmii_pins: rmii_pins {
- 				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
- 				       "PD18", "PD19", "PD20", "PD22", "PD23";
-@@ -394,7 +585,7 @@
- 				function = "spi1";
- 			};
- 
--			uart0_pins_a: uart0 {
-+			uart0_pb_pins: uart0-pb-pins {
- 				pins = "PB8", "PB9";
- 				function = "uart0";
- 			};
-@@ -474,15 +665,6 @@
- 			status = "disabled";
- 		};
- 
--		pwm: pwm@1c21400 {
--			compatible = "allwinner,sun50i-a64-pwm",
--				     "allwinner,sun5i-a13-pwm";
--			reg = <0x01c21400 0x8>;
--			clocks = <&osc24M>;
--			#pwm-cells = <3>;
--			status = "disabled";
--		};
--
- 		uart0: serial@1c28000 {
- 			compatible = "snps,dw-apb-uart";
- 			reg = <0x01c28000 0x400>;
-@@ -617,8 +799,6 @@
- 			clocks = <&ccu CLK_BUS_EMAC>;
- 			clock-names = "stmmaceth";
- 			status = "disabled";
--			#address-cells = <1>;
--			#size-cells = <0>;
- 
- 			mdio: mdio {
- 				compatible = "snps,dwmac-mdio";
-@@ -638,11 +818,69 @@
- 			#interrupt-cells = <3>;
- 		};
- 
-+		pwm: pwm@1c21400 {
-+			compatible = "allwinner,sun50i-a64-pwm",
-+				     "allwinner,sun5i-a13-pwm";
-+			reg = <0x01c21400 0x400>;
-+			clocks = <&osc24M>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pwm_pin>;
-+			#pwm-cells = <3>;
-+			status = "disabled";
-+		};
-+
-+		hdmi: hdmi@1ee0000 {
-+			compatible = "allwinner,sun50i-a64-dw-hdmi",
-+				     "allwinner,sun8i-a83t-dw-hdmi";
-+			reg = <0x01ee0000 0x10000>;
-+			reg-io-width = <1>;
-+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-+				 <&ccu CLK_HDMI>;
-+			clock-names = "iahb", "isfr", "tmds";
-+			resets = <&ccu RST_BUS_HDMI1>;
-+			reset-names = "ctrl";
-+			phys = <&hdmi_phy>;
-+			phy-names = "hdmi-phy";
-+			status = "disabled";
-+
-+			ports {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				hdmi_in: port@0 {
-+					reg = <0>;
-+
-+					hdmi_in_tcon1: endpoint {
-+						remote-endpoint = <&tcon1_out_hdmi>;
-+					};
-+				};
-+
-+				hdmi_out: port@1 {
-+					reg = <1>;
-+				};
-+			};
-+		};
-+
-+		hdmi_phy: hdmi-phy@1ef0000 {
-+			compatible = "allwinner,sun50i-a64-hdmi-phy";
-+			reg = <0x01ef0000 0x10000>;
-+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-+				 <&ccu 7>;
-+			clock-names = "bus", "mod", "pll-0";
-+			resets = <&ccu RST_BUS_HDMI0>;
-+			reset-names = "phy";
-+			#phy-cells = <0>;
-+		};
-+
- 		rtc: rtc@1f00000 {
- 			compatible = "allwinner,sun6i-a31-rtc";
- 			reg = <0x01f00000 0x54>;
- 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-+			clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
-+			clocks = <&osc32k>;
-+			#clock-cells = <1>;
- 		};
- 
- 		r_intc: interrupt-controller@1f00c00 {
-@@ -664,6 +902,29 @@
- 			#reset-cells = <1>;
- 		};
- 
-+		r_i2c: i2c@1f02400 {
-+			compatible = "allwinner,sun50i-a64-i2c",
-+				     "allwinner,sun6i-a31-i2c";
-+			reg = <0x01f02400 0x400>;
-+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&r_ccu CLK_APB0_I2C>;
-+			resets = <&r_ccu RST_APB0_I2C>;
-+			status = "disabled";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		r_pwm: pwm@1f03800 {
-+			compatible = "allwinner,sun50i-a64-pwm",
-+				     "allwinner,sun5i-a13-pwm";
-+			reg = <0x01f03800 0x400>;
-+			clocks = <&osc24M>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&r_pwm_pin>;
-+			#pwm-cells = <3>;
-+			status = "disabled";
-+		};
-+
- 		r_pio: pinctrl@1f02c00 {
- 			compatible = "allwinner,sun50i-a64-r-pinctrl";
- 			reg = <0x01f02c00 0x400>;
-@@ -675,6 +936,16 @@
- 			interrupt-controller;
- 			#interrupt-cells = <3>;
- 
-+			r_i2c_pl89_pins: r-i2c-pl89-pins {
-+				pins = "PL8", "PL9";
-+				function = "s_i2c";
-+			};
-+
-+			r_pwm_pin: pwm {
-+				pins = "PL10";
-+				function = "s_pwm";
-+			};
-+
- 			r_rsb_pins: rsb {
- 				pins = "PL0", "PL1";
- 				function = "s_rsb";
--- 
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-dts.patch b/gnu/packages/patches/u-boot-pinebook-dts.patch
deleted file mode 100644
index 48c004fdfc..0000000000
--- a/gnu/packages/patches/u-boot-pinebook-dts.patch
+++ /dev/null
@@ -1,388 +0,0 @@
-From b972831c3cd24f3c9bb0995ed61db8f8239f3391 Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul@gmail.com>
-Date: Mon, 5 Nov 2018 20:24:31 -0800
-Subject: [PATCH 10/13] sunxi: DT: add support for Pinebook
-
-Pinebook is a laptop produced by Pine64, with USB-connected keyboard,
-USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP
-bridge from Analogix.
-
-Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
-Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Cc: Vagrant Cascadian <vagrant@debian.org>
-Reviewed-by: Jagan Teki <jagan@openedev.com>
----
- arch/arm/dts/Makefile                        |   1 +
- arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi |  15 ++
- arch/arm/dts/sun50i-a64-pinebook.dts         | 294 +++++++++++++++++++++++++++
- configs/pinebook_defconfig                   |  22 ++
- 4 files changed, 332 insertions(+)
- create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
- create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
- create mode 100644 configs/pinebook_defconfig
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 3093c1185e..eae6b9ee5d 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -406,6 +406,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
- 	sun50i-a64-orangepi-win.dtb \
- 	sun50i-a64-pine64-plus.dtb \
- 	sun50i-a64-pine64.dtb \
-+	sun50i-a64-pinebook.dtb \
- 	sun50i-a64-sopine-baseboard.dtb
- dtb-$(CONFIG_MACH_SUN9I) += \
- 	sun9i-a80-optimus.dtb \
-diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
-new file mode 100644
-index 0000000000..a99b7171d0
---- /dev/null
-+++ b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
-@@ -0,0 +1,15 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
-+ *
-+ */
-+
-+/* The ANX6345 eDP-bridge is on r_i2c */
-+&r_i2c {
-+	anx6345: edp-bridge@38 {
-+		compatible = "analogix,anx6345";
-+		reg = <0x38>;
-+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
-+		status = "okay";
-+	};
-+};
-diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts
-new file mode 100644
-index 0000000000..ec537c5297
---- /dev/null
-+++ b/arch/arm/dts/sun50i-a64-pinebook.dts
-@@ -0,0 +1,294 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
-+ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
-+ *
-+ */
-+
-+/dts-v1/;
-+
-+#include "sun50i-a64.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pwm/pwm.h>
-+
-+/ {
-+	model = "Pinebook";
-+	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		ethernet0 = &rtl8723cs;
-+	};
-+
-+	vdd_bl: regulator@0 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "bl-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+		enable-active-high;
-+	};
-+
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&pwm 0 50000 0>;
-+		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
-+		default-brightness-level = <2>;
-+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
-+		power-supply = <&vdd_bl>;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+
-+		framebuffer-lcd {
-+			panel-supply = <&reg_dc1sw>;
-+			dvdd25-supply = <&reg_dldo2>;
-+			dvdd12-supply = <&reg_fldo1>;
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+
-+		lid_switch {
-+			label = "Lid Switch";
-+			gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
-+			linux,input-type = <EV_SW>;
-+			linux,code = <SW_LID>;
-+			linux,can-disable;
-+			wakeup-source;
-+		};
-+	};
-+
-+	reg_vcc3v3: vcc3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+	};
-+};
-+
-+&ehci0 {
-+	phys = <&usbphy 0>;
-+	phy-names = "usb";
-+	status = "okay";
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-+	disable-wp;
-+	bus-width = <4>;
-+	status = "okay";
-+};
-+
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo4>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8723cs: wifi@1 {
-+		reg = <1>;
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
-+	vmmc-supply = <&reg_dcdc1>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	bus-width = <8>;
-+	non-removable;
-+	cap-mmc-hw-reset;
-+	mmc-hs200-1_8v;
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	phys = <&usbphy 0>;
-+	phy-names = "usb";
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&pwm {
-+	status = "okay";
-+};
-+
-+&r_rsb {
-+	status = "okay";
-+
-+	axp803: pmic@3a3 {
-+		compatible = "x-powers,axp803";
-+		reg = <0x3a3>;
-+		interrupt-parent = <&r_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+};
-+
-+/* The ANX6345 eDP-bridge is on r_i2c */
-+&r_i2c {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&r_i2c_pl89_pins>;
-+	status = "okay";
-+};
-+
-+#include "axp803.dtsi"
-+
-+&reg_aldo1 {
-+	regulator-min-microvolt = <2800000>;
-+	regulator-max-microvolt = <2800000>;
-+	regulator-name = "vcc-csi";
-+};
-+
-+&reg_aldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pl";
-+};
-+
-+&reg_aldo3 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-pll-avcc";
-+};
-+
-+&reg_dc1sw {
-+	regulator-name = "vcc-lcd";
-+};
-+
-+&reg_dcdc1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-3v3";
-+};
-+
-+&reg_dcdc2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1300000>;
-+	regulator-name = "vdd-cpux";
-+};
-+
-+/* DCDC3 is polyphased with DCDC2 */
-+
-+&reg_dcdc5 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1200000>;
-+	regulator-max-microvolt = <1200000>;
-+	regulator-name = "vcc-dram";
-+};
-+
-+&reg_dcdc6 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1100000>;
-+	regulator-max-microvolt = <1100000>;
-+	regulator-name = "vdd-sys";
-+};
-+
-+&reg_dldo1 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-hdmi";
-+};
-+
-+&reg_dldo2 {
-+	regulator-min-microvolt = <2500000>;
-+	regulator-max-microvolt = <2500000>;
-+	regulator-name = "vcc-edp";
-+};
-+
-+&reg_dldo3 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "avdd-csi";
-+};
-+
-+&reg_dldo4 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-wifi";
-+};
-+
-+&reg_eldo1 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "cpvdd";
-+};
-+
-+&reg_eldo3 {
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "vdd-1v8-csi";
-+};
-+
-+&reg_fldo1 {
-+	regulator-min-microvolt = <1200000>;
-+	regulator-max-microvolt = <1200000>;
-+	regulator-name = "vcc-1v2-hsic";
-+};
-+
-+&reg_fldo2 {
-+	regulator-always-on;
-+	regulator-min-microvolt = <1100000>;
-+	regulator-max-microvolt = <1100000>;
-+	regulator-name = "vdd-cpus";
-+};
-+
-+&reg_ldo_io0 {
-+	regulator-min-microvolt = <3300000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "vcc-usb";
-+	status = "okay";
-+};
-+
-+&reg_rtc_ldo {
-+	regulator-name = "vcc-rtc";
-+};
-+
-+&simplefb_hdmi {
-+	vcc-hdmi-supply = <&reg_dldo1>;
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pb_pins>;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	dr_mode = "host";
-+};
-+
-+&usbphy {
-+	usb0_vbus-supply = <&reg_ldo_io0>;
-+	usb1_vbus-supply = <&reg_ldo_io0>;
-+	status = "okay";
-+};
-diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig
-new file mode 100644
-index 0000000000..5294dbd2eb
---- /dev/null
-+++ b/configs/pinebook_defconfig
-@@ -0,0 +1,22 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN50I=y
-+CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
-+CONFIG_DRAM_CLK=552
-+CONFIG_DRAM_ZQ=3881949
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+CONFIG_R_I2C_ENABLE=y
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
-+CONFIG_DM_REGULATOR=y
-+CONFIG_DM_REGULATOR_FIXED=y
-+CONFIG_DM_PWM=y
-+CONFIG_PWM_SUNXI=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-+# CONFIG_USB_GADGET is not set
-+CONFIG_VIDEO_BRIDGE=y
-+CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
--- 
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch b/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch
deleted file mode 100644
index 118bdf8e0c..0000000000
--- a/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 20940ef2a397446a209350900d3bd618c3fd5b94 Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul@gmail.com>
-Date: Mon, 5 Nov 2018 20:24:28 -0800
-Subject: [PATCH 07/13] mmc: sunxi: add support for automatic delay calibration
-
-A64 and H6 support automatic delay calibration and Linux driver uses it
-instead of hardcoded delays. Add support for it to u-boot driver.
-
-Fixes eMMC instability on Pinebook
-
-Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
-Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Reviewed-by: Andre Przywara <andre.przywara@arm.com>
-Cc: Vagrant Cascadian <vagrant@debian.org>
-Reviewed-by: Jagan Teki <jagan@openedev.com>
----
- arch/arm/include/asm/arch-sunxi/mmc.h |  6 +++++-
- drivers/mmc/sunxi_mmc.c               | 21 ++++++++++++++++++++-
- 2 files changed, 25 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
-index d98c53faaa..f2deafddd2 100644
---- a/arch/arm/include/asm/arch-sunxi/mmc.h
-+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
-@@ -46,7 +46,9 @@ struct sunxi_mmc {
- 	u32 cbda;		/* 0x94 */
- 	u32 res2[26];
- #if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
--	u32 res3[64];
-+	u32 res3[17];
-+	u32 samp_dl;
-+	u32 res4[46];
- #endif
- 	u32 fifo;		/* 0x100 / 0x200 FIFO access address */
- };
-@@ -130,5 +132,7 @@ struct sunxi_mmc {
- #define SUNXI_MMC_COMMON_CLK_GATE		(1 << 16)
- #define SUNXI_MMC_COMMON_RESET			(1 << 18)
- 
-+#define SUNXI_MMC_CAL_DL_SW_EN		(0x1 << 7)
-+
- struct mmc *sunxi_mmc_init(int sdc_no);
- #endif /* _SUNXI_MMC_H */
-diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
-index 39f15eb423..147eb9b4d5 100644
---- a/drivers/mmc/sunxi_mmc.c
-+++ b/drivers/mmc/sunxi_mmc.c
-@@ -99,11 +99,16 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
- {
- 	unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
- 	bool new_mode = false;
-+	bool calibrate = false;
- 	u32 val = 0;
- 
- 	if (IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE) && (priv->mmc_no == 2))
- 		new_mode = true;
- 
-+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
-+	calibrate = true;
-+#endif
-+
- 	/*
- 	 * The MMC clock has an extra /2 post-divider when operating in the new
- 	 * mode.
-@@ -174,7 +179,11 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
- 		val = CCM_MMC_CTRL_MODE_SEL_NEW;
- 		setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW);
- #endif
--	} else {
-+	} else if (!calibrate) {
-+		/*
-+		 * Use hardcoded delay values if controller doesn't support
-+		 * calibration
-+		 */
- 		val = CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
- 			CCM_MMC_CTRL_SCLK_DLY(sclk_dly);
- 	}
-@@ -228,6 +237,16 @@ static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc)
- 	rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
- 	writel(rval, &priv->reg->clkcr);
- 
-+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
-+	/* A64 supports calibration of delays on MMC controller and we
-+	 * have to set delay of zero before starting calibration.
-+	 * Allwinner BSP driver sets a delay only in the case of
-+	 * using HS400 which is not supported by mainline U-Boot or
-+	 * Linux at the moment
-+	 */
-+	writel(SUNXI_MMC_CAL_DL_SW_EN, &priv->reg->samp_dl);
-+#endif
-+
- 	/* Re-enable Clock */
- 	rval |= SUNXI_MMC_CLK_ENABLE;
- 	writel(rval, &priv->reg->clkcr);
--- 
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch b/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch
deleted file mode 100644
index 824a16b9db..0000000000
--- a/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 31a4ac4d79d75baeede3edfa95515fd4169ef502 Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul@gmail.com>
-Date: Mon, 5 Nov 2018 20:24:30 -0800
-Subject: [PATCH 09/13] sun50i: A64: add support for R_I2C controller
-
-Allwinner A64 has a I2C controller, which is in the R_ MMIO zone and has
-two groups of pinmuxes on PL bank, so it's called R_I2C.
-
-Add support for this I2C controller and the pinmux which doesn't conflict
-with RSB.
-
-Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
-Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Cc: Vagrant Cascadian <vagrant@debian.org>
-Acked-by: Jagan Teki <jagan@openedev.com>
----
- arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
- arch/arm/mach-sunxi/Kconfig            | 1 +
- board/sunxi/board.c                    | 6 ++++++
- 3 files changed, 8 insertions(+)
-
-diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
-index 6a5eafc3d3..2daf23f6f5 100644
---- a/arch/arm/include/asm/arch-sunxi/gpio.h
-+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
-@@ -211,6 +211,7 @@ enum sunxi_gpio_number {
- #define SUN8I_H3_GPL_R_TWI	2
- #define SUN8I_A23_GPL_R_TWI	3
- #define SUN8I_GPL_R_UART	2
-+#define SUN50I_GPL_R_TWI	2
- 
- #define SUN9I_GPN_R_RSB		3
- 
-diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
-index 6277abc3cc..560dc9b25d 100644
---- a/arch/arm/mach-sunxi/Kconfig
-+++ b/arch/arm/mach-sunxi/Kconfig
-@@ -278,6 +278,7 @@ config MACH_SUN50I
- 	select ARM64
- 	select DM_I2C
- 	select PHY_SUN4I_USB
-+	select SUN6I_PRCM
- 	select SUNXI_DE2
- 	select SUNXI_GEN_SUN6I
- 	select SUPPORT_SPL
-diff --git a/board/sunxi/board.c b/board/sunxi/board.c
-index b196d48674..64ccbc7245 100644
---- a/board/sunxi/board.c
-+++ b/board/sunxi/board.c
-@@ -168,10 +168,16 @@ void i2c_init_board(void)
- #endif
- 
- #ifdef CONFIG_R_I2C_ENABLE
-+#ifdef CONFIG_MACH_SUN50I
-+	clock_twi_onoff(5, 1);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPL(8), SUN50I_GPL_R_TWI);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPL(9), SUN50I_GPL_R_TWI);
-+#else
- 	clock_twi_onoff(5, 1);
- 	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
- 	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI);
- #endif
-+#endif
- }
- 
- #if defined(CONFIG_ENV_IS_IN_MMC) && defined(CONFIG_ENV_IS_IN_FAT)
--- 
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-syscon-node.patch b/gnu/packages/patches/u-boot-pinebook-syscon-node.patch
deleted file mode 100644
index 9289645bec..0000000000
--- a/gnu/packages/patches/u-boot-pinebook-syscon-node.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From ababb5920e8992c9bb7956df3cc85dc68d27dfe8 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Mon, 29 Oct 2018 00:56:48 +0000
-Subject: [PATCH 04/13] sunxi: A64: Re-add syscon to DT node
-
-The sun50i-a64.dtsi changes introduced in Linux v4.19-rc1 changed the
-compatible name for the syscon controller, dropping the generic "syscon"
-fallback. Using this new DT node will make the Ethernet driver in every
-older kernel (or non-Linux kernels) fail to initialise the MAC device.
-
-To allow booting distribution kernels (from installer images via UEFI,
-for instance), re-add the syscon compatible string as a fallback. This
-works with both older and newer kernels.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Reviewed-by: Jagan Teki <jagan@openedev.com>
----
- arch/arm/dts/sun50i-a64.dtsi | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
-index f3a66f8882..ff41abc96a 100644
---- a/arch/arm/dts/sun50i-a64.dtsi
-+++ b/arch/arm/dts/sun50i-a64.dtsi
-@@ -259,7 +259,8 @@
- 		};
- 
- 		syscon: syscon@1c00000 {
--			compatible = "allwinner,sun50i-a64-system-control";
-+			compatible = "allwinner,sun50i-a64-system-control",
-+				"syscon";
- 			reg = <0x01c00000 0x1000>;
- 			#address-cells = <1>;
- 			#size-cells = <1>;
--- 
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-video-bridge.patch b/gnu/packages/patches/u-boot-pinebook-video-bridge.patch
deleted file mode 100644
index 8c6ca8a992..0000000000
--- a/gnu/packages/patches/u-boot-pinebook-video-bridge.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 8336a43792a103c13d939b3925cb75322911f7fb Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul@gmail.com>
-Date: Mon, 5 Nov 2018 20:24:29 -0800
-Subject: [PATCH 08/13] dm: video: bridge: don't fail to activate bridge if
- reset or sleep GPIO is missing
-
-Both GPIOs are optional, so we shouldn't fail if any is missing.
-Without this fix reset is not deasserted if sleep GPIO is missing.
-
-Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
-Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Reviewed-by: Andre Przywara <andre.przywara@arm.com>
-Cc: Vagrant Cascadian <vagrant@debian.org>
----
- drivers/video/bridge/video-bridge-uclass.c | 16 +++++++++++-----
- 1 file changed, 11 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/video/bridge/video-bridge-uclass.c b/drivers/video/bridge/video-bridge-uclass.c
-index cd4959cc71..5fecb4cfd5 100644
---- a/drivers/video/bridge/video-bridge-uclass.c
-+++ b/drivers/video/bridge/video-bridge-uclass.c
-@@ -106,13 +106,19 @@ static int video_bridge_pre_probe(struct udevice *dev)
- int video_bridge_set_active(struct udevice *dev, bool active)
- {
- 	struct video_bridge_priv *uc_priv = dev_get_uclass_priv(dev);
--	int ret;
-+	int ret = 0;
- 
- 	debug("%s: %d\n", __func__, active);
--	ret = dm_gpio_set_value(&uc_priv->sleep, !active);
--	if (ret)
--		return ret;
--	if (active) {
-+	if (uc_priv->sleep.dev) {
-+		ret = dm_gpio_set_value(&uc_priv->sleep, !active);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	if (!active)
-+		return 0;
-+
-+	if (uc_priv->reset.dev) {
- 		ret = dm_gpio_set_value(&uc_priv->reset, true);
- 		if (ret)
- 			return ret;
--- 
-2.11.0
-