diff options
43 files changed, 642 insertions, 343 deletions
diff --git a/doc/guix.texi b/doc/guix.texi index 6b637ddfe9..2aa3b11f07 100644 --- a/doc/guix.texi +++ b/doc/guix.texi @@ -513,6 +513,7 @@ ready to use it. * Setting Up the Daemon:: Preparing the build daemon's environment. * Invoking guix-daemon:: Running the build daemon. * Application Setup:: Application-specific setup. +* Upgrading Guix:: Upgrading Guix and its build daemon. @end menu @node Binary Installation @@ -794,22 +795,6 @@ GNU Coding Standards}). The @command{configure} script protects against unintended misconfiguration of @var{localstatedir} so you do not inadvertently corrupt your store (@pxref{The Store}). -@cindex Nix, compatibility -When a working installation of @url{https://nixos.org/nix/, the Nix package -manager} is available, you -can instead configure Guix with @code{--disable-daemon}. In that case, -Nix replaces the three dependencies above. - -Guix is compatible with Nix, so it is possible to share the same store -between both. To do so, you must pass @command{configure} not only the -same @code{--with-store-dir} value, but also the same -@code{--localstatedir} value. The latter is essential because it -specifies where the database that stores metadata about the store is -located, among other things. The default values for Nix are -@code{--with-store-dir=/nix/store} and @code{--localstatedir=/nix/var}. -Note that @code{--disable-daemon} is not required if -your goal is to share the store with Nix. - @node Running the Test Suite @section Running the Test Suite @@ -1777,6 +1762,40 @@ invoke the actual linker with this new set of arguments. You can instruct the wrapper to refuse to link against libraries not in the store by setting the @code{GUIX_LD_WRAPPER_ALLOW_IMPURITIES} environment variable to @code{no}. +@node Upgrading Guix +@section Upgrading Guix + +@cindex Upgrading Guix, on a foreign distro + +To upgrade Guix, run: + +@example +guix pull +@end example + +@xref{Invoking guix pull}, for more information. + +@cindex upgrading Guix for the root user, on a foreign distro +@cindex upgrading the Guix daemon, on a foreign distro +@cindex @command{guix pull} for the root user, on a foreign distro + +On a foreign distro, you can upgrade the build daemon by running: + +@example +sudo -i guix pull +@end example + +@noindent +followed by (assuming your distro uses the systemd service management +tool): + +@example +systemctl restart guix-daemon.service +@end example + +On Guix System, upgrading the daemon is achieved by reconfiguring the +system (@pxref{Invoking guix system, @code{guix system reconfigure}}). + @c TODO What else? @c ********************************************************************* diff --git a/gnu/local.mk b/gnu/local.mk index 18a25e6bc7..9f8ce842b6 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -674,6 +674,7 @@ dist_patch_DATA = \ %D%/packages/patches/a2ps-CVE-2001-1593.patch \ %D%/packages/patches/a2ps-CVE-2014-0466.patch \ %D%/packages/patches/a2ps-CVE-2015-8107.patch \ + %D%/packages/patches/abcl-fix-build-xml.patch \ %D%/packages/patches/abiword-explictly-cast-bools.patch \ %D%/packages/patches/abiword-black-drawing-with-gtk322.patch \ %D%/packages/patches/adb-add-libraries.patch \ @@ -764,7 +765,6 @@ dist_patch_DATA = \ %D%/packages/patches/dbus-helper-search-path.patch \ %D%/packages/patches/dbus-c++-gcc-compat.patch \ %D%/packages/patches/dbus-c++-threading-mutex.patch \ - %D%/packages/patches/dealii-mpi-deprecations.patch \ %D%/packages/patches/debops-constants-for-external-program-names.patch \ %D%/packages/patches/debops-debops-defaults-fall-back-to-less.patch \ %D%/packages/patches/deja-dup-use-ref-keyword-for-iter.patch \ @@ -1098,7 +1098,6 @@ dist_patch_DATA = \ %D%/packages/patches/lxsession-use-gapplication.patch \ %D%/packages/patches/make-glibc-compat.patch \ %D%/packages/patches/make-impure-dirs.patch \ - %D%/packages/patches/mame-rapidjson-fix.patch \ %D%/packages/patches/mariadb-client-test-32bit.patch \ %D%/packages/patches/mars-install.patch \ %D%/packages/patches/mars-sfml-2.3.patch \ diff --git a/gnu/packages/admin.scm b/gnu/packages/admin.scm index 6d5e4b9fcc..bef6dac07c 100644 --- a/gnu/packages/admin.scm +++ b/gnu/packages/admin.scm @@ -2852,11 +2852,10 @@ you are running, what theme or icon set you are using, etc.") (license license:expat))) (define-public screenfetch - ;; First commit supporting current Guix System. - (let ((commit "e3ec82dd464e81e4d10bef218b3016e3044c766c")) + (let ((commit "e7b94fc3c529b9b97f32b71fd4bc05fb1d0f5864")) (package (name "screenfetch") - (version (git-version "3.8.0" "1" commit)) + (version (git-version "3.8.0" "2" commit)) (source (origin (method git-fetch) (uri (git-reference @@ -2865,7 +2864,7 @@ you are running, what theme or icon set you are using, etc.") (file-name (git-file-name name version)) (sha256 (base32 - "1lzs1l5xgj9mn4b59lhkfgqnyiivf8svd1iwjabzrax90rdmxfwj")))) + "13i7dczbqwhws08zzrdraki1zkqv0qkbgx9c1r8vmg5qr9f7hfzg")))) (build-system trivial-build-system) (arguments `(#:modules ((guix build utils)) diff --git a/gnu/packages/algebra.scm b/gnu/packages/algebra.scm index 02b4d4ca21..02058b24ac 100644 --- a/gnu/packages/algebra.scm +++ b/gnu/packages/algebra.scm @@ -344,7 +344,7 @@ precision.") (define-public giac (package (name "giac") - (version "1.5.0-63") + (version "1.5.0-65") (source (origin (method url-fetch) ;; "~parisse/giac" is not used because the maintainer regularly @@ -356,7 +356,7 @@ precision.") "source/giac_" version ".tar.gz")) (sha256 (base32 - "1jp7awyp8j8w6fhn802z8ddbq1fxhkyk9xdf0mq0mm0chpkylwqk")))) + "1g2fp9vgy0gqjmi6mlc3ldfn8ryq3h4mfd7rcq5hs6ry21hblv30")))) (build-system gnu-build-system) (arguments `(#:modules ((ice-9 ftw) @@ -987,7 +987,7 @@ features, and more.") (define-public xtensor (package (name "xtensor") - (version "0.20.5") + (version "0.20.9") (source (origin (method git-fetch) (uri (git-reference @@ -995,7 +995,7 @@ features, and more.") (commit version))) (sha256 (base32 - "0kkc4ar7p2d94jnclmrh46dwv7ldy9lx630vm9gci3pp4hnhbj9f")) + "1rw04bdi7mzp362dhkxr9m4rafnvb47xjsi9p3fp4vfif8v0jij8")) (file-name (git-file-name name version)))) (build-system cmake-build-system) (native-inputs @@ -1005,7 +1005,7 @@ features, and more.") `(#:configure-flags '("-DBUILD_TESTS=ON") #:test-target "xtest")) - (home-page "http://quantstack.net/xtensor") + (home-page "https://quantstack.net/xtensor") (synopsis "C++ tensors with broadcasting and lazy computing") (description "xtensor is a C++ library meant for numerical analysis with multi-dimensional array expressions. diff --git a/gnu/packages/bioinformatics.scm b/gnu/packages/bioinformatics.scm index 34289501fc..95dc6aff45 100644 --- a/gnu/packages/bioinformatics.scm +++ b/gnu/packages/bioinformatics.scm @@ -7367,13 +7367,13 @@ S4Vectors package itself.") (define-public r-iranges (package (name "r-iranges") - (version "2.18.2") + (version "2.18.3") (source (origin (method url-fetch) (uri (bioconductor-uri "IRanges" version)) (sha256 (base32 - "0dc35844c1mfj07hvy6yn4wag6qdggbgl9gjcg3wpkh9hkm60a5n")))) + "05rw2b2bwns443n7d6lf97zdv1jbqdii2nprhs6x852w73m2a2g3")))) (properties `((upstream-name . "IRanges"))) (build-system r-build-system) @@ -7731,13 +7731,13 @@ biological sequences or sets of sequences.") (define-public r-rsamtools (package (name "r-rsamtools") - (version "2.0.0") + (version "2.0.1") (source (origin (method url-fetch) (uri (bioconductor-uri "Rsamtools" version)) (sha256 (base32 - "1nv5idyjk75mvl4np5sig0xa6qygm1ivj33k041ffyj19q8jf7ij")))) + "0wzp5vsmqs7h44r7lcw8fnz5x9bcdcfiqq8d3h62wwibyk2lg0w1")))) (properties `((upstream-name . "Rsamtools"))) (build-system r-build-system) @@ -8283,14 +8283,14 @@ secondary structure and comparative analysis in R.") (define-public r-rhtslib (package (name "r-rhtslib") - (version "1.16.1") + (version "1.16.2") (source (origin (method url-fetch) (uri (bioconductor-uri "Rhtslib" version)) (sha256 (base32 - "178zbrm221rwhbjk7j2v9g5ra44k0xg7c5abhd810m3g7snma8k8")))) + "07qaqj2hypmrg40m3pci082bzar6wi10dh77r4a8x74dfppcwdzf")))) (properties `((upstream-name . "Rhtslib"))) (build-system r-build-system) ;; Without this a temporary directory ends up in the Rhtslib.so binary, @@ -9165,14 +9165,14 @@ proteomics packages.") (define-public r-mzr (package (name "r-mzr") - (version "2.18.0") + (version "2.18.1") (source (origin (method url-fetch) (uri (bioconductor-uri "mzR" version)) (sha256 (base32 - "0g5r6yk4gyz0xdwlmrcij4zv7apdgsgygr043095l33hard6nsl5")) + "1pr1pcrg3r3pccm5ag6l8ic6rpqbk9jnlb9mm7g4ak5jwrajbzjq")) (modules '((guix build utils))) (snippet '(begin @@ -9193,7 +9193,8 @@ proteomics packages.") -lboost_iostreams -lboost_thread -lboost_filesystem -lboost_chrono\n"))) #t))))) (inputs - `(;; XXX Boost 1.69 will not work here. + `(;; Our default boost package won't work here, unfortunately, even with + ;; mzR version 2.18.1. ("boost" ,boost-for-mysql) ; use this instead of the bundled boost sources ("zlib" ,zlib))) (propagated-inputs @@ -10267,14 +10268,14 @@ family of feature/genome hypotheses.") (define-public r-gviz (package (name "r-gviz") - (version "1.28.1") + (version "1.28.3") (source (origin (method url-fetch) (uri (bioconductor-uri "Gviz" version)) (sha256 (base32 - "0chsb3ijwd8zh588s1vqgfassn2rzax5rhqrhl0ini6pi4ilchp2")))) + "0347r1ly0vzpilflzbyzsjdf4cday294lw3fxzx61clblrmws1ki")))) (properties `((upstream-name . "Gviz"))) (build-system r-build-system) (propagated-inputs diff --git a/gnu/packages/cpp.scm b/gnu/packages/cpp.scm index 4a28a394bf..1c98e381ab 100644 --- a/gnu/packages/cpp.scm +++ b/gnu/packages/cpp.scm @@ -248,7 +248,7 @@ intuitive syntax and trivial integration.") (define-public xtl (package (name "xtl") - (version "0.6.4") + (version "0.6.7") (source (origin (method git-fetch) (uri @@ -257,7 +257,7 @@ intuitive syntax and trivial integration.") (commit version))) (sha256 (base32 - "0rwdw43fq7c581m6frzsd06h71sf7abk7danwa3cp6wd6cgkwdbk")) + "0dds2fzyis42b1c3biqr3ir9l96csyyfkwrkm3fqjksdhgdklzmj")) (file-name (git-file-name name version)))) (native-inputs `(("googletest" ,googletest) diff --git a/gnu/packages/cran.scm b/gnu/packages/cran.scm index 89a581cb5e..3a9a605efe 100644 --- a/gnu/packages/cran.scm +++ b/gnu/packages/cran.scm @@ -98,14 +98,14 @@ the system clipboards.") (define-public r-ellipsis (package (name "r-ellipsis") - (version "0.2.0.1") + (version "0.3.0") (source (origin (method url-fetch) (uri (cran-uri "ellipsis" version)) (sha256 (base32 - "0hx9l043433bwm1np9sypph77c7y9dddpz0wrhbkcv01x32jhr8f")))) + "01z9gq311nzwv3a0sa49jhm5ylqd59srip4vjkrf23hzgb5i9y0b")))) (build-system r-build-system) (propagated-inputs `(("r-rlang" ,r-rlang))) @@ -371,14 +371,14 @@ such as copy/paste from an R session.") (define-public r-callr (package (name "r-callr") - (version "3.3.1") + (version "3.3.2") (source (origin (method url-fetch) (uri (cran-uri "callr" version)) (sha256 (base32 - "0rvrlg86fxr5nadvqa0dr1iifqjs4d1rc32v76m3ccvx6m3xlq5z")))) + "12dbqzjngbyaqdyw0yq1blyfx8pagcvx1vqj2jm451hs25nhdrnh")))) (build-system r-build-system) (propagated-inputs `(("r-r6" ,r-r6) @@ -582,14 +582,14 @@ applications.") (define-public r-htmltable (package (name "r-htmltable") - (version "1.13.1") + (version "1.13.2") (source (origin (method url-fetch) (uri (cran-uri "htmlTable" version)) (sha256 (base32 - "1l44b33xgj2698k6nz17r8fl0ink14ryzng803apm9d6bnv357v8")))) + "0h6jslchlx1dzqqdb70c3n9xlapcym9ykycvr0hc4q3450y8qmvh")))) (properties `((upstream-name . "htmlTable"))) (build-system r-build-system) (propagated-inputs @@ -615,13 +615,13 @@ LaTeX.") (define-public r-curl (package (name "r-curl") - (version "4.0") + (version "4.2") (source (origin (method url-fetch) (uri (cran-uri "curl" version)) (sha256 (base32 - "0wb1j87fa2nd4a9x1w2nmc453nzvx6qiq8dviwc4jr36hsf9ra89")))) + "0xh227gvb056wlipjxxbf555z1i1qcs7rr1igvs6k6645y9irrlp")))) (build-system r-build-system) (arguments `(#:phases @@ -2996,14 +2996,14 @@ provides a one-row summary of model-level statistics.") (define-public r-recipes (package (name "r-recipes") - (version "0.1.6") + (version "0.1.7") (source (origin (method url-fetch) (uri (cran-uri "recipes" version)) (sha256 (base32 - "1ndz9h0zvdj141r63l8047wbhaj0x8fwzzyq7b8mh78pvrrdpq2i")))) + "1gw8x7vqj7k18mfpiqinyfwzv9i5r0pb51k7xcfxsjap6m9nks98")))) (build-system r-build-system) (propagated-inputs `(("r-dplyr" ,r-dplyr) @@ -4048,14 +4048,14 @@ terminals.") (define-public r-tinytex (package (name "r-tinytex") - (version "0.15") + (version "0.16") (source (origin (method url-fetch) (uri (cran-uri "tinytex" version)) (sha256 (base32 - "145dmgq7h55mmqqlnnj153j484x2a9s1fbvjbjkdyqzpnz9qh2ax")))) + "1dadq9l0527v038b1k1dyfs0dklsgxnmplls3qhqprfgskif8mga")))) (build-system r-build-system) (propagated-inputs `(("r-xfun" ,r-xfun))) @@ -4166,21 +4166,20 @@ generation, and 2D/3D network visualization.") (define-public r-ttr (package (name "r-ttr") - (version "0.23-4") + (version "0.23-5") (source (origin (method url-fetch) (uri (cran-uri "TTR" version)) (sha256 (base32 - "18mzyv6cmxmqyqsfwlx2b2k055887mfgc2jgj8xkn8c6m56n05zb")))) + "0fxipnyxaz55n4camrk9cs71x9w4dsmjrihysv8i1s6khf825rg6")))) (properties `((upstream-name . "TTR"))) (build-system r-build-system) (propagated-inputs `(("r-curl" ,r-curl) ("r-xts" ,r-xts) ("r-zoo" ,r-zoo))) - (native-inputs `(("gfortran" ,gfortran))) (home-page "https://github.com/joshuaulrich/TTR") (synopsis "Technical trading rules") (description @@ -4753,14 +4752,14 @@ files.") (define-public r-shinyace (package (name "r-shinyace") - (version "0.4.0") + (version "0.4.1") (source (origin (method url-fetch) (uri (cran-uri "shinyAce" version)) (sha256 (base32 - "0hvih5g0pswlnz5rf3blx5yqw11ssxvm8w4klxddp1ap20ncbgl1")))) + "1m33dfm2kjirvgix7ybv1kbzgjkicdpv411g9c0q3fw6rnyhfxxn")))) (properties `((upstream-name . "shinyAce"))) (build-system r-build-system) (propagated-inputs @@ -6250,14 +6249,14 @@ vice versa), or to deal with multiple declared missing values.") (define-public r-sjmisc (package (name "r-sjmisc") - (version "2.8.1") + (version "2.8.2") (source (origin (method url-fetch) (uri (cran-uri "sjmisc" version)) (sha256 (base32 - "1a30n3cyd9h9ilaiai9ywy53f03nikafc47rvpws2c2vghc8mbn7")))) + "0rl0bmk91wc4dxdgy008fl0dwkx3ffvys30vgpnr78lb4pk45nb2")))) (build-system r-build-system) (propagated-inputs `(("r-dplyr" ,r-dplyr) @@ -6265,7 +6264,8 @@ vice versa), or to deal with multiple declared missing values.") ("r-magrittr" ,r-magrittr) ("r-purrr" ,r-purrr) ("r-rlang" ,r-rlang) - ("r-sjlabelled" ,r-sjlabelled))) + ("r-sjlabelled" ,r-sjlabelled) + ("r-tidyselect" ,r-tidyselect))) (home-page "https://github.com/strengejacke/sjmisc") (synopsis "Data and variable transformation functions") (description @@ -7025,14 +7025,14 @@ used to teach mathematics, statistics, computation and modeling.") (define-public r-raster (package (name "r-raster") - (version "3.0-2") + (version "3.0-7") (source (origin (method url-fetch) (uri (cran-uri "raster" version)) (sha256 (base32 - "0z4qh3ag1iyly4zjvzi3x2namkndkqn3cjb3ac22xd11sq5gdgiz")))) + "0faxv71hlxkblvbi3ps1vfzm3wwi0brwzmpsr5114bddcqyiqkvn")))) (build-system r-build-system) (propagated-inputs `(("r-rcpp" ,r-rcpp) @@ -8215,14 +8215,14 @@ differentiation.") (define-public r-bayestestr (package (name "r-bayestestr") - (version "0.2.5") + (version "0.3.0") (source (origin (method url-fetch) (uri (cran-uri "bayestestR" version)) (sha256 (base32 - "08d3bsb6li59n17bx1zrqnlnvniyb3vls9kl856km4chx3b2ff82")))) + "0r453zb106hj9w53jjgckxqajjf7shlrgv10gjxsv8if6qybdz5b")))) (properties `((upstream-name . "bayestestR"))) (build-system r-build-system) (propagated-inputs @@ -8916,14 +8916,14 @@ address a bug.") (define-public r-rcppannoy (package (name "r-rcppannoy") - (version "0.0.12") + (version "0.0.13") (source (origin (method url-fetch) (uri (cran-uri "RcppAnnoy" version)) (sha256 (base32 - "1b0fmip9c4i0my1yjrvqy8jxfiiqcggq2kms135q0b53njxnqwwg")))) + "1jibp9b07c5ka1kif0nl7f168hxfvysj32wnmnxg85l663hmvm8j")))) (properties `((upstream-name . "RcppAnnoy"))) (build-system r-build-system) (propagated-inputs @@ -8943,14 +8943,14 @@ This package provides an R interface.") (define-public r-rcpphnsw (package (name "r-rcpphnsw") - (version "0.1.0") + (version "0.2.0") (source (origin (method url-fetch) (uri (cran-uri "RcppHNSW" version)) (sha256 (base32 - "158a069n42pbnjrlmvqsr6bm2cfp9hxpnk3nhp3dwi9qjlq4r9bm")))) + "0gqdkw7vkcm544rz45g0hplg836ygzbfwk9gh9wr0817icvdb3qv")))) (properties `((upstream-name . "RcppHNSW"))) (build-system r-build-system) (propagated-inputs `(("r-rcpp" ,r-rcpp))) @@ -9550,14 +9550,14 @@ maps.") (define-public r-tidytree (package (name "r-tidytree") - (version "0.2.7") + (version "0.2.8") (source (origin (method url-fetch) (uri (cran-uri "tidytree" version)) (sha256 (base32 - "15ky7hj7w08jx94wm0yikckca0apwv3jy5svd77dpzgb2lr9ff9a")))) + "1hkddl8kj1g01dy7xiracx81f6b405b3ga2qp4wlrl552b9xxpby")))) (build-system r-build-system) (propagated-inputs `(("r-ape" ,r-ape) @@ -12772,14 +12772,14 @@ univariate class intervals for mapping or other graphics purposes.") (define-public r-spdata (package (name "r-spdata") - (version "0.3.0") + (version "0.3.2") (source (origin (method url-fetch) (uri (cran-uri "spData" version)) (sha256 (base32 - "162cqb331ki43jx4r8lpkjpn2l712figd896rnawg9j1jmjyl96y")))) + "190msrrpn226x27pcnck4ac34f9k4xcn26cyz2apdri2nzkr6zbw")))) (properties `((upstream-name . "spData"))) (build-system r-build-system) (home-page "https://github.com/Nowosad/spData") @@ -12846,14 +12846,14 @@ tessellation.") (define-public r-sf (package (name "r-sf") - (version "0.7-7") + (version "0.8-0") (source (origin (method url-fetch) (uri (cran-uri "sf" version)) (sha256 (base32 - "192hw52x1qlif8zyai1kff1wiyr3yl5f7jj1rk3k0nr8das0qy6i")))) + "05dyq0vcz2f1fl03hk3v1a4nz4s84yyqw4rc9w9cwfq71gvm9qwf")))) (build-system r-build-system) (inputs `(("gdal" ,gdal) @@ -12880,14 +12880,14 @@ datum transformations.") (define-public r-spdep (package (name "r-spdep") - (version "1.1-2") + (version "1.1-3") (source (origin (method url-fetch) (uri (cran-uri "spdep" version)) (sha256 (base32 - "06mk81kc1ml2wjc8wwwgr0wasjcr4mwrxpfa8vfc373bmnha635s")))) + "1f8cjffqqc6rnb3n4qym70ca6nz2kvrsd3g587wrqdr79nnbwnrk")))) (build-system r-build-system) (propagated-inputs `(("r-boot" ,r-boot) @@ -13343,14 +13343,14 @@ authoring books and technical documents with R Markdown.") (define-public r-optparse (package (name "r-optparse") - (version "1.6.2") + (version "1.6.4") (source (origin (method url-fetch) (uri (cran-uri "optparse" version)) (sha256 (base32 - "0zrp6jakjhawrwfri270ym83vj5a7nvjk0w6b41z41ahw2da99dm")))) + "0wyrc42ja3ab5szx46zmz8lm7vzfqxkjca0m0sms8g9hqbmmay6d")))) (build-system r-build-system) (propagated-inputs `(("r-getopt" ,r-getopt))) @@ -14994,14 +14994,14 @@ in R, including a translation of the original algorithm into R.") (define-public r-uwot (package (name "r-uwot") - (version "0.1.3") + (version "0.1.4") (source (origin (method url-fetch) (uri (cran-uri "uwot" version)) (sha256 (base32 - "1mq6qi8q9xslh1b99srj480s2a08pfv4bs9m2ykyijj44j9fcdj9")))) + "1y9wpzs92d1fl2x5figfywd48lkyhwx37j542z0rf6ckrl46n89n")))) (build-system r-build-system) (propagated-inputs `(("r-dqrng" ,r-dqrng) @@ -15502,14 +15502,14 @@ in pipelines.") (define-public r-parameters (package (name "r-parameters") - (version "0.1.0") + (version "0.2.0") (source (origin (method url-fetch) (uri (cran-uri "parameters" version)) (sha256 (base32 - "12v301va1l3xydicbf0k04anxlmyjclbbjfg0riprryhkxwwk8g5")))) + "1mgggb3l67wgjiccq4y84wbs2dw9qk01akd553yiwbwky9rpawgh")))) (properties `((upstream-name . "parameters"))) (build-system r-build-system) (propagated-inputs @@ -15614,14 +15614,14 @@ signalled with increasing levels of non-invasive verbosity.") (define-public r-assertable (package (name "r-assertable") - (version "0.2.6") + (version "0.2.7") (source (origin (method url-fetch) (uri (cran-uri "assertable" version)) (sha256 (base32 - "0jjd6ylh26fykzzv1q2lbajzfj07lyxwb3b3xmr2zdg2fp5b2w4c")))) + "1npks9rcrnchmd0silq6qrvqkmdkp9fwjkyyvvp1lqjclyxk6vkk")))) (build-system r-build-system) (propagated-inputs `(("r-data-table" ,r-data-table))) diff --git a/gnu/packages/emacs-xyz.scm b/gnu/packages/emacs-xyz.scm index 2a9abaee36..5be8440e05 100644 --- a/gnu/packages/emacs-xyz.scm +++ b/gnu/packages/emacs-xyz.scm @@ -1856,7 +1856,7 @@ single buffer.") (define-public emacs-tablist (package (name "emacs-tablist") - (version "0.70") + (version "1.0") (source (origin (method git-fetch) (uri (git-reference @@ -1865,7 +1865,7 @@ single buffer.") (file-name (git-file-name name version)) (sha256 (base32 - "0gy9hxm7bca0l1hfy2pzn86avpifrz3bs8xzpicj4kxw5wi4ygns")))) + "0pzsdg0rm59daw34ppss79cg05z9wnr8nkmdcc48nkd0p69ip2yy")))) (build-system emacs-build-system) (home-page "https://github.com/politza/tablist") (synopsis "Extension for @code{tabulated-list-mode}") @@ -3627,8 +3627,8 @@ completion candidate when using the Company text completion framework.") (license license:gpl3+)))) (define-public emacs-compdef - (let ((commit "fc08a9b049c3718fc7d6c6ee2140759aff031bc9") - (revision "1")) + (let ((commit "67104a38763cc819644f711248b170a43bce151b") + (revision "2")) (package (name "emacs-compdef") (version (git-version "0.2" revision commit)) @@ -3640,7 +3640,7 @@ completion candidate when using the Company text completion framework.") (commit commit))) (file-name (git-file-name name version)) (sha256 - (base32 "1dwf4rlj19d80yp656c7nkp6hb3mabv808r6ix3hpv6rjjs38vhl")))) + (base32 "1f6y6cr67gps9jp5hd20xszfd3k26v70g6z4g5db6wdkvlnc2wkg")))) (build-system emacs-build-system) (home-page "https://gitlab.com/jjzmajic/compdef") (synopsis "Set local completion backends") @@ -3649,6 +3649,31 @@ completion backends according to mode, and integrates with @code{use-package}.") (license license:gpl3+)))) +(define-public emacs-handle + (let ((commit "0180a33c92b53d042c3e248a047e15337122d922") + (revision "1")) + (package + (name "emacs-handle") + (version (git-version "0.1" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://gitlab.com/jjzmajic/handle.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0ldrdfxspkq0m07l98hhj9nydgj9qi557mnnpd3v4xrwqwhyr4nc")))) + (build-system emacs-build-system) + (home-page "https://gitlab.com/jjzmajic/handle") + (synopsis "Handle generic functions across related major modes") + (description "This package provides generic functions that specialize on +major modes and intended purpose rather than on arguments. Different +callables for tasks like expression evaluation, definition-jumping, and more +can now be grouped accordingly and tried in sequence until one of them +succeeds.") + (license license:gpl3+)))) + (define-public emacs-nswbuff (let ((commit "362da7f3687e2eb5bb11667347de85f4a9d002bc") (revision "1")) @@ -4740,7 +4765,7 @@ them easier to distinguish from other, less important buffers.") (define-public emacs-prescient (package (name "emacs-prescient") - (version "3.2") + (version "3.3") (source (origin (method git-fetch) (uri (git-reference @@ -4749,7 +4774,7 @@ them easier to distinguish from other, less important buffers.") (file-name (git-file-name name version)) (sha256 (base32 - "0d60h4rfm5jcf8cf11z91wjqp0xcrviskqzyqhfliqvy2i2yl6ks")))) + "1wqk1g8fjpcbpiz32k7arnisncd4n9zs84dn3qn9y8ggjzldqy91")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-company" ,emacs-company) @@ -5086,6 +5111,9 @@ fully-functional one.") (base32 "0fapvhmhgc9kppf3bvkgry0cd7gyilg7sfvlscfrfjxpx4xvwsfy")))) (build-system emacs-build-system) + (arguments + `(#:tests? #t + #:test-command '("make" "test"))) (home-page "https://github.com/abo-abo/hydra") (synopsis "Make Emacs bindings that stick around") (description @@ -5957,6 +5985,59 @@ If you want to mark a folder manually as a project just create an empty .projectile file in it.") (license license:gpl3+))) +(define-public emacs-skeletor + (let ((commit "47c5b761aee8452716c97a69949ac2f675affe13") + (revision "1")) + (package + (name "emacs-skeletor") + (version (git-version "1.6.1" revision commit)) + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/chrisbarrett/skeletor.el.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "12bdgykfh4mwsqdazxjdvha62h3q3v33159ypy91f6x59y01fi0n")))) + (build-system emacs-build-system) + (propagated-inputs + `(("emacs-s" ,emacs-s) + ("emacs-f" ,emacs-f) + ("emacs-dash" ,emacs-dash) + ("emacs-let-alist" ,emacs-let-alist))) + (native-inputs + `(("emacs-ert-runner" ,emacs-ert-runner))) + (arguments + `(#:include (cons "^project-skeletons\\/" %default-include) + ;; XXX: one failing test involving initializing a git repo + #:phases + (modify-phases %standard-phases + (add-before 'check 'make-test-writable + (lambda _ + (make-file-writable "test/skeletor-test.el") + #t)) + (add-before 'check 'remove-git-test + (lambda _ + (emacs-batch-edit-file "test/skeletor-test.el" + `(progn + (progn + (goto-char (point-min)) + (re-search-forward + "ert-deftest initialises-git-repo") + (beginning-of-line) + (kill-sexp)) + (basic-save-buffer))) + #t))) + #:tests? #t + #:test-command '("ert-runner"))) + (home-page "https://github.com/chrisbarrett/skeletor.el") + (synopsis "Project skeletons for Emacs") + (description "This package provides project templates and automates the +mundane parts of setting up a new project, such as version control, licenses, +and tooling.") + (license license:gpl3+)))) + (define-public emacs-elfeed (package (name "emacs-elfeed") @@ -11586,7 +11667,7 @@ timestamps by providing a @code{ts} struct.") (define-public emacs-org-ql (package (name "emacs-org-ql") - (version "0.2") + (version "0.2.1") (source (origin (method git-fetch) (uri (git-reference @@ -11594,7 +11675,7 @@ timestamps by providing a @code{ts} struct.") (commit version))) (sha256 (base32 - "0mq0aj0a3a5gi9nz0ncpzsh731d92n86b0iinvx1m45dcal06h9y")) + "1xyabg9fhpip6426za6wjrn0msnaf10c5fzzaawwagk7zmjf9b48")) (file-name (git-file-name name version)))) (build-system emacs-build-system) (propagated-inputs @@ -12502,8 +12583,8 @@ key again.") (license license:gpl3+))) (define-public emacs-mbsync - (let ((commit "f549eccde6033449d24cd5b6148599484850c403") - (revision "2")) + (let ((commit "8f80c267cab1acb0d5bdd5b0059f5d1790d499ff") + (revision "3")) (package (name "emacs-mbsync") (version (git-version "0.1.2" revision commit)) @@ -12516,7 +12597,7 @@ key again.") (file-name (git-file-name name version)) (sha256 (base32 - "1pdj41rq3pq4jdb5pma5j495xj7w7jgn8pnz1z1zwg75pn7ydfp0")))) + "1dwlpcczsa6b7bwv5149by0qmk8v2y7bjad02k4fy25yxznqzci9")))) (build-system emacs-build-system) (home-page "https://github.com/dimitri/mbsync-el") (synopsis "Interface to mbsync for Emacs") @@ -13636,7 +13717,7 @@ using user-provided rules.") (define-public emacs-on-screen (package (name "emacs-on-screen") - (version "1.3.2") + (version "1.3.3") (source (origin (method url-fetch) @@ -13644,11 +13725,9 @@ using user-provided rules.") "http://elpa.gnu.org/packages/on-screen-" version ".el")) (file-name (string-append name "-" version ".el")) (sha256 - (base32 - "15d18mjgv1pnwl6kf3pr5w64q1322p1l1qlfvnckglwmzy5sl2qv")))) + (base32 "0ga4hw23ki583li2z2hr7l6hk1nc2kdg4afndg06cm9jn158wza7")))) (build-system emacs-build-system) - (home-page - "https://github.com/michael-heerdegen/on-screen.el") + (home-page "https://github.com/michael-heerdegen/on-screen.el") (synopsis "Guide your eyes while scrolling") (description "Scrolling can be distracting because your eyes may lose @@ -14538,6 +14617,11 @@ on-line service.") (propagated-inputs `(("emacs-helm" ,emacs-helm) ("emacs-company" ,emacs-company))) + (native-inputs + `(("emacs-ert-runner" ,emacs-ert-runner))) + (arguments + `(#:tests? #t + #:test-command '("ert-runner"))) (home-page "https://github.com/Sodel-the-Vociferous/helm-company") (synopsis "Helm interface for company-mode") (description @@ -15276,18 +15360,16 @@ was called.") (define-public emacs-dired-du (package (name "emacs-dired-du") - (version "0.5.1") + (version "0.5.2") (source (origin (method url-fetch) (uri (string-append - "https://elpa.gnu.org/packages/dired-du-" - version ".tar")) + "https://elpa.gnu.org/packages/dired-du-" version ".tar")) (sha256 - (base32 - "1091scnrjh0a4gja4z6jxic6ghy1yryv46qk9c76pmh50cpw6766")))) + (base32 "0vhph7vcicsiq28b10h3b4dvnhckcy4gccpdgsad5j7pwa5k26m1")))) (build-system emacs-build-system) - (home-page "http://elpa.gnu.org/packages/dired-du.html") + (home-page "https://elpa.gnu.org/packages/dired-du.html") (synopsis "Dired with recursive directory sizes") (description "Display the recursive size of directories in Dired. @@ -16640,7 +16722,7 @@ constant expressions.") (define-public emacs-docker (package (name "emacs-docker") - (version "1.2.0") + (version "1.3.0") (source (origin (method git-fetch) (uri (git-reference @@ -16649,7 +16731,7 @@ constant expressions.") (file-name (git-file-name name version)) (sha256 (base32 - "15kd86kaq1x6giz855q9w6zvnyc742j309j0pmm86rwx398g4rq1")))) + "1g8r1faqp0z0vqp9qrl8m84pa0v2ddvc91klphdkfmldwv7rfipw")))) (inputs `(("emacs-undercover" ,emacs-undercover))) (propagated-inputs @@ -16671,10 +16753,10 @@ constant expressions.") (define-public emacs-dockerfile-mode ;; Latest upstream release is too old. - (let ((commit "7223d92718f78fa3ab15667cdb2ed90cfeb579e7")) + (let ((commit "ed73e82dcc636dad00d1a8c3b32a49136d25ee60")) (package (name "emacs-dockerfile-mode") - (version (git-version "1.2" "1" commit)) + (version (git-version "1.2" "2" commit)) (source (origin (method git-fetch) @@ -16684,7 +16766,7 @@ constant expressions.") (file-name (git-file-name name version)) (sha256 (base32 - "0hmipgl4rk6aih11i8mnspwdijjiwk2y0wns6lzs8bgkvy3c064r")))) + "0lri2rnx4lr23vqfphkpq39cd4xfgzkvz1xsz7ccdvl4qj0k7fdl")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-s" ,emacs-s))) @@ -17557,12 +17639,11 @@ and searching through @code{Ctags} files.") (license license:gpl3+))) (define-public emacs-org-download - (let ((commit "ac72bf8fce3e855da60687027b6b8601cf1de480") - (version "0.1.0") - (revision "1")) + (let ((commit "10c9d7c8eed928c88a896310c882e3af4d8d0f61") + (revision "2")) (package (name "emacs-org-download") - (version (git-version version revision commit)) + (version (git-version "0.1.0" revision commit)) (source (origin (method git-fetch) (uri (git-reference @@ -17570,7 +17651,7 @@ and searching through @code{Ctags} files.") (commit commit))) (sha256 (base32 - "0ax5wd44765wnwabkam1g2r62gq8crx2qq733s2mg1z72cfvwxqb")) + "0i8wlx1i7y1vn5lqwjifvymvszg28a07vwqcm4jslf1v2ajs1lsl")) (file-name (git-file-name name version)))) (build-system emacs-build-system) (propagated-inputs diff --git a/gnu/packages/embedded.scm b/gnu/packages/embedded.scm index 7678f85ddd..429eac37c5 100644 --- a/gnu/packages/embedded.scm +++ b/gnu/packages/embedded.scm @@ -1001,14 +1001,14 @@ SPI, I2C, JTAG.") (define-public fc-host-tools (package (name "fc-host-tools") - (version "10") + (version "11") (source (origin (method url-fetch) (uri (string-append "ftp://ftp.freecalypso.org/pub/GSM/" "FreeCalypso/fc-host-tools-r" version ".tar.bz2")) (sha256 (base32 - "0ybjqkz1cpnxni66p3valv1bva39vpwzdcc4040lqzx6py9h7h8b")))) + "0s87lp6gd8i8ivrdd7mnnalysr65035nambcm992rgla7sk76sj1")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; No tests exist. @@ -1017,12 +1017,7 @@ SPI, I2C, JTAG.") (string-append "INCLUDE_INSTALL_DIR=" %output "include/rvinterf")) #:phases (modify-phases %standard-phases - (delete 'configure) - (add-after 'unpack 'handle-tarbomb - (lambda _ - (chdir "..") ; url-fetch/tarbomb doesn't work for some reason. - #t)) - (add-after 'handle-tarbomb 'patch-installation-paths + (add-after 'unpack 'patch-installation-paths (lambda* (#:key outputs #:allow-other-keys) (substitute* '("Makefile" "rvinterf/etmsync/fsiomain.c" @@ -1039,13 +1034,16 @@ SPI, I2C, JTAG.") (string-append (assoc-ref outputs "out") "/lib/freecalypso/loadtools")) (("\\$\\{INSTALL_PREFIX\\}/loadtools") (string-append (assoc-ref outputs "out") "/lib/freecalypso/loadtools")) + (("\\$\\{INSTALL_PREFIX\\}/target-bin") + (string-append (assoc-ref outputs "out") "/lib/freecalypso/target-bin")) (("/opt/freecalypso") (assoc-ref outputs "out"))) - #t))))) + #t)) + (delete 'configure)))) (inputs `(("libx11" ,libx11))) (synopsis "Freecalypso host tools") - (description "This package provides some tools for debugging Freecalypso phones. + (description "This package provides some tools for debugging FreeCalypso phones and the FreeCalypso FCDEV3B dev board. @enumerate @item fc-e1decode: Decodes a binary Melody E1 file into an ASCII source file. @@ -1120,10 +1118,10 @@ feeding melodies to be played to it. that can be issued through the RVTMUX (debug trace) serial channel. This program is our test mode shell for sending Test Mode commands to targets and displaying decoded target responses. -@item fcup-smsend Send a short message via SMS -@item fcup-smsendmult Send multiple short messages via SMS in one go -@item fcup-smsendpdu Send multiple short messages given in PDU format via SMS -@item sms-pdu-decode Decode PDU format messages +@item fcup-smsend: Send a short message via SMS +@item fcup-smsendmult: Send multiple short messages via SMS in one go +@item fcup-smsendpdu: Send multiple short messages given in PDU format via SMS +@item sms-pdu-decode: Decode PDU format messages @end enumerate") (home-page "https://www.freecalypso.org/") (license license:public-domain))) diff --git a/gnu/packages/emulators.scm b/gnu/packages/emulators.scm index 449c694612..f6da7f2d25 100644 --- a/gnu/packages/emulators.scm +++ b/gnu/packages/emulators.scm @@ -1183,7 +1183,7 @@ play them on systems for which they were never designed!") (define-public mame (package (name "mame") - (version "0.212") + (version "0.214") (source (origin (method git-fetch) @@ -1193,11 +1193,7 @@ play them on systems for which they were never designed!") (file-name (git-file-name name version)) (sha256 (base32 - "0p3zcb9l624dsy2gyv23ppp1k1iwd1vrg8cbn5v4fx1s44mx7f5c")) - (patches - ;; FIXME: Remove once 0.213 is out. Applied upstream as - ;; 0b5b13cf1e28550b49c387dec93f9801f029e313. - (search-patches "mame-rapidjson-fix.patch")) + "129yk3ybcviscy2xk1mkkzxm4h4nh5p6ndfgqbmcx547p1s6hbja")) (modules '((guix build utils))) (snippet ;; Remove bundled libraries. diff --git a/gnu/packages/games.scm b/gnu/packages/games.scm index d41d3e1f66..4ed4176d17 100644 --- a/gnu/packages/games.scm +++ b/gnu/packages/games.scm @@ -6124,7 +6124,7 @@ when packaged in Blorb container files or optionally from individual files.") (define-public libmanette (package (name "libmanette") - (version "0.2.2") + (version "0.2.3") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/libmanette/" @@ -6132,7 +6132,7 @@ when packaged in Blorb container files or optionally from individual files.") "libmanette-" version ".tar.xz")) (sha256 (base32 - "1lpprk2qz1lsqf9xj6kj2ciyc1zmjhj5lwd584qkh7jgz2x9y6wb")))) + "1zxh7jn2zg7hivmal5zxam6fxvjsd1w6hlw0m2kysk76b8anbw60")))) (build-system meson-build-system) (native-inputs `(("glib" ,glib "bin") ; for glib-compile-resources diff --git a/gnu/packages/gnome.scm b/gnu/packages/gnome.scm index b7e375e5d8..a5c0ffbf77 100644 --- a/gnu/packages/gnome.scm +++ b/gnu/packages/gnome.scm @@ -3118,15 +3118,15 @@ permission from user.") (define-public geocode-glib (package (name "geocode-glib") - (version "3.26.0") + (version "3.26.1") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/geocode-glib/" (version-major+minor version) "/" - name "-" version ".tar.xz")) + "geocode-glib-" version ".tar.xz")) (sha256 (base32 - "1vmydxs5xizcmaxpkfrq75xpj6pqrpdjizxyb30m00h54yqqch7a")))) + "076ydfpyc4n5c9dbqmf26i4pilfi5jpw6cjcgrbgrjbndavnmajv")))) (build-system meson-build-system) (arguments `(#:phases @@ -3455,16 +3455,15 @@ throughout GNOME for API documentation).") (define-public cogl (package (name "cogl") - (version "1.22.2") + (version "1.22.4") (source (origin (method url-fetch) - (uri (string-append "mirror://gnome/sources/" name "/" + (uri (string-append "mirror://gnome/sources/cogl/" (version-major+minor version) "/" - name "-" version ".tar.xz")) + "cogl-" version ".tar.xz")) (sha256 - (base32 - "03f0ha3qk7ca0nnkkcr1garrm1n1vvfqhkz9lwjm592fnv6ii9rr")))) + (base32 "1q0drs82a8f6glg1v29bb6g2nf15fw0rvdx3d0rgcgfarfaby5sj")))) ;; NOTE: mutter exports a bundled fork of cogl, so when making changes to ;; cogl, corresponding changes may be appropriate in mutter as well. (build-system gnu-build-system) @@ -3710,15 +3709,15 @@ queries upon that data.") (define-public libgnome-games-support (package (name "libgnome-games-support") - (version "1.4.2") + (version "1.4.4") (source (origin (method url-fetch) - (uri (string-append "mirror://gnome/sources/" name "/" + (uri (string-append "mirror://gnome/sources/libgnome-games-support/" (version-major+minor version) "/" - name "-" version ".tar.xz")) + "libgnome-games-support-" version ".tar.xz")) (sha256 (base32 - "02hirpk885jndwarbl3cl5fk7w2z5ziv677csyv1wi2n6rmpn088")))) + "1zkbmnrn161p74qg6jhsn9f66yjjzxfm13pl1klv9av8k1bax9pq")))) (build-system gnu-build-system) (arguments '(#:phases @@ -4627,15 +4626,15 @@ wraps things up in a developer-friendly way.") (define-public libgee (package (name "libgee") - (version "0.20.1") + (version "0.20.2") (source (origin (method url-fetch) - (uri (string-append "mirror://gnome/sources/" name "/" + (uri (string-append "mirror://gnome/sources/libgee/" (version-major+minor version) "/" - name "-" version ".tar.xz")) + "libgee-" version ".tar.xz")) (sha256 (base32 - "0c26x8gi3ivmhlbqcmiag4jwrkvcy28ld24j55nqr3jikb904a5v")))) + "0g1mhl7nidg82v4cikkk8dakzc18hg7wv0dsf2pbyijzfm5mq0wy")))) (build-system gnu-build-system) (arguments `(#:phases @@ -8185,7 +8184,7 @@ functionality.") (define-public gthumb (package (name "gthumb") - (version "3.8.0") + (version "3.8.1") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/gthumb/" @@ -8193,7 +8192,7 @@ functionality.") "gthumb-" version ".tar.xz")) (sha256 (base32 - "1l2s1facq1r6yvqjqc34aqfzlvb3nhkhn79xisxbbdlgrrxdq52f")))) + "184zn79w4s9y1zy42ar31p3jsg8rmkxy8k6iry51nz8aizbcs7jb")))) (build-system meson-build-system) (arguments `(#:glib-or-gtk? #t diff --git a/gnu/packages/gnupg.scm b/gnu/packages/gnupg.scm index 56db412145..4ee7ed6634 100644 --- a/gnu/packages/gnupg.scm +++ b/gnu/packages/gnupg.scm @@ -1,5 +1,5 @@ ;;; GNU Guix --- Functional package management for GNU -;;; Copyright © 2012, 2013, 2014, 2015, 2016, 2017, 2018 Ludovic Courtès <ludo@gnu.org> +;;; Copyright © 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2013, 2015, 2018 Andreas Enge <andreas@enge.fr> ;;; Copyright © 2014, 2018 Eric Bavier <bavier@member.fsf.org> ;;; Copyright © 2014, 2015, 2016 Mark H Weaver <mhw@netris.org> @@ -478,6 +478,14 @@ interface (FFI) of Guile.") `(("guile" ,guile-2.0) ,@(alist-delete "guile" (package-inputs guile-gcrypt)))))) +(define-public guile3.0-gcrypt + (package + (inherit guile-gcrypt) + (name "guile3.0-gcrypt") + (inputs + `(("guile" ,guile-next) + ,@(alist-delete "guile" (package-inputs guile-gcrypt)))))) + (define-public python-gpg (package (name "python-gpg") diff --git a/gnu/packages/gpodder.scm b/gnu/packages/gpodder.scm index 7c9994f128..f896ddae35 100644 --- a/gnu/packages/gpodder.scm +++ b/gnu/packages/gpodder.scm @@ -31,12 +31,13 @@ #:use-module (gnu packages pkg-config) #:use-module (gnu packages python-web) #:use-module (gnu packages python-xyz) - #:use-module (gnu packages qt)) + #:use-module (gnu packages qt) + #:use-module (gnu packages video)) (define-public gpodder (package (name "gpodder") - (version "3.10.9") + (version "3.10.10") (source (origin (method git-fetch) @@ -45,7 +46,7 @@ (commit version))) (sha256 (base32 - "1sdmr1sq1d4p492zp9kq3npl7p56yr0pr470z9r6xxcylax5mhfq")) + "1phgd3xly6ddrxpx5glgfs1ya4xq2qbcx5d9l3d6i4dlhji1dmja")) (file-name (git-file-name name version)))) (build-system python-build-system) (native-inputs @@ -58,6 +59,7 @@ ("python-html5lib" ,python-html5lib) ("python-mygpoclient" ,python-mygpoclient) ("python-podcastparser" ,python-podcastparser) + ("youtube-dl" ,youtube-dl) ("xdg-utils" ,xdg-utils))) (arguments '(#:phases diff --git a/gnu/packages/gps.scm b/gnu/packages/gps.scm index 26b1fe0ee2..d2481cf25b 100644 --- a/gnu/packages/gps.scm +++ b/gnu/packages/gps.scm @@ -1,7 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2014, 2015 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2016, 2017, 2018, 2019 Efraim Flashner <efraim@flashner.co.il> -;;; Copyright © 2018 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2018 Mathieu Othacehe <m.othacehe@gmail.com> ;;; ;;; This file is part of GNU Guix. @@ -171,7 +171,7 @@ coordinates as well as partial support for adjustments in global coordinate syst (define-public gpxsee (package (name "gpxsee") - (version "7.8") + (version "7.12") (source (origin (method git-fetch) (uri (git-reference @@ -180,7 +180,7 @@ coordinates as well as partial support for adjustments in global coordinate syst (file-name (git-file-name name version)) (sha256 (base32 - "1ymqz4wrl9ghkyyqi2vrnlyvz3fc84s3p8a1dkiqlvyvj360ck9j")))) + "0c3axs3mm6xzabwbvy9vgq1sryjpi4h91nwzy9iyv9zjxz7phgzc")))) (build-system gnu-build-system) (arguments '(#:phases diff --git a/gnu/packages/guile-xyz.scm b/gnu/packages/guile-xyz.scm index 43a599b503..4ad6a3575a 100644 --- a/gnu/packages/guile-xyz.scm +++ b/gnu/packages/guile-xyz.scm @@ -1591,9 +1591,6 @@ many readers as needed).") (home-page "https://www.nongnu.org/guile-reader/") (license license:gpl3+))) -(define-public guile2.2-reader - (deprecated-package "guile2.2-reader" guile-reader)) - (define-public guile-ncurses (package (name "guile-ncurses") @@ -1689,9 +1686,6 @@ for Guile\".") (name "guile2.0-lib") (inputs `(("guile" ,guile-2.0))))) -(define-public guile2.2-lib - (deprecated-package "guile2.2-lib" guile-lib)) - (define-public guile-minikanren (package (name "guile-minikanren") @@ -1728,8 +1722,11 @@ See http://minikanren.org/ for more on miniKanren generally.") (name "guile2.0-minikanren") (native-inputs `(("guile" ,guile-2.0))))) -(define-public guile2.2-minikanren - (deprecated-package "guile2.2-minikanren" guile-minikanren)) +(define-public guile3.0-minikanren + (package + (inherit guile-minikanren) + (name "guile3.0-minikanren") + (native-inputs `(("guile" ,guile-next))))) (define-public guile-irregex (package @@ -1777,8 +1774,11 @@ inspired by the SCSH regular expression system.") (name "guile2.0-irregex") (native-inputs `(("guile" ,guile-2.0))))) -(define-public guile2.2-irregex - (deprecated-package "guile2.2-irregex" guile-irregex)) +(define-public guile3.0-irregex + (package + (inherit guile-irregex) + (name "guile3.0-irregex") + (native-inputs `(("guile" ,guile-next))))) (define-public haunt (package @@ -1850,9 +1850,6 @@ interface for reading articles in any format.") (name "guile2.0-haunt") (inputs `(("guile" ,guile-2.0))))) -(define-public guile2.2-haunt - (deprecated-package "guile2.2-haunt" haunt)) - (define-public guile-redis (package (name "guile-redis") @@ -1883,9 +1880,6 @@ key-value cache and store.") ,@(alist-delete "guile" (package-native-inputs guile-redis)))))) -(define-public guile2.2-redis - (deprecated-package "guile2.2-redis" guile-redis)) - (define-public guile-commonmark (package (name "guile-commonmark") @@ -1919,9 +1913,6 @@ is no support for parsing block and inline level HTML.") (name "guile2.0-commonmark") (inputs `(("guile" ,guile-2.0))))) -(define-public guile2.2-commonmark - (deprecated-package "guile2.2-commonmark" guile-commonmark)) - (define-public mcron (package (name "mcron") diff --git a/gnu/packages/guile.scm b/gnu/packages/guile.scm index 478b8faebe..b0dfa89ee5 100644 --- a/gnu/packages/guile.scm +++ b/gnu/packages/guile.scm @@ -357,6 +357,10 @@ GNU@tie{}Guile. Use the @code{(ice-9 readline)} module and call its (package-input-rewriting `((,guile-2.2 . ,guile-2.0)) (guile-variant-package-name "guile2.0"))) +(define package-for-guile-3.0 + (package-input-rewriting `((,guile-2.2 . ,guile-next)) + (guile-variant-package-name "guile3.0"))) + (define-public guile-for-guile-emacs (package (inherit guile-2.2) (name "guile-for-guile-emacs") @@ -433,9 +437,6 @@ specification. These are the main features: ;; This is the 1.x branch of Guile-JSON. guile-json) -(define-public guile2.2-json - (deprecated-package "guile2.2-json" guile-json)) - (define-public guile2.0-json (package-for-guile-2.0 guile-json)) @@ -453,6 +454,9 @@ specification. These are the main features: (base32 "14m6b6g2maw0mkvfm4x63rqb54vgbpn1gcqs715ijw4bikfzlqfz")))))) +(define-public guile3.0-json + (package-for-guile-3.0 guile-json-3)) + ;; There are two guile-gdbm packages, one using the FFI and one with ;; direct C bindings, hence the verbose name. @@ -505,8 +509,8 @@ Guile's foreign function interface.") (define-public guile2.0-gdbm-ffi (package-for-guile-2.0 guile-gdbm-ffi)) -(define-public guile2.2-gdbm-ffi - (deprecated-package "guile2.2-gdbm-ffi" guile-gdbm-ffi)) +(define-public guile3.0-gdbm-ffi + (package-for-guile-3.0 guile-gdbm-ffi)) (define-public guile-sqlite3 (package @@ -569,6 +573,9 @@ type system, elevating types to first-class status.") (define-public guile2.0-bytestructures (package-for-guile-2.0 guile-bytestructures)) +(define-public guile3.0-bytestructures + (package-for-guile-3.0 guile-bytestructures)) + (define-public guile-git (package (name "guile-git") diff --git a/gnu/packages/java.scm b/gnu/packages/java.scm index def2c8d92d..fe745a5222 100644 --- a/gnu/packages/java.scm +++ b/gnu/packages/java.scm @@ -2,7 +2,7 @@ ;;; Copyright © 2015, 2016, 2017, 2018, 2019 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2016 Leo Famulari <leo@famulari.name> ;;; Copyright © 2016, 2017 Roel Janssen <roel@gnu.org> -;;; Copyright © 2017 Carlo Zancanaro <carlo@zancanaro.id.au> +;;; Copyright © 2017, 2019 Carlo Zancanaro <carlo@zancanaro.id.au> ;;; Copyright © 2017, 2018 Julien Lepiller <julien@lepiller.eu> ;;; Copyright © 2017 Thomas Danckaert <post@thomasdanckaert.be> ;;; Copyright © 2016, 2017, 2018 Alex Vong <alexvong1995@gmail.com> @@ -11140,3 +11140,67 @@ network protocols, and core version control algorithms.") `(("java-javaewah" ,java-javaewah) ("java-jsch" ,java-jsch) ("java-slf4j-api" ,java-slf4j-api))))) + +(define-public abcl + (package + (name "abcl") + (version "1.5.0") + (source + (origin + (method url-fetch) + (uri (string-append "https://abcl.org/releases/" + version "/abcl-src-" version ".tar.gz")) + (sha256 + (base32 + "1hhvcg050nfpjbdmskc1cv2j38qi6qfl77a61b5cxx576kbff3lj")) + (patches + (search-patches + "abcl-fix-build-xml.patch")))) + (build-system ant-build-system) + (native-inputs + `(("java-junit" ,java-junit))) + (arguments + `(#:build-target "abcl.jar" + #:test-target "abcl.test" + #:phases + (modify-phases %standard-phases + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (let ((share (string-append (assoc-ref outputs "out") + "/share/java/")) + (bin (string-append (assoc-ref outputs "out") + "/bin/"))) + (mkdir-p share) + (install-file "dist/abcl.jar" share) + (install-file "dist/abcl-contrib.jar" share) + (mkdir-p bin) + (with-output-to-file (string-append bin "abcl") + (lambda _ + (let ((classpath (string-append + share "abcl.jar" + ":" + share "abcl-contrib.jar"))) + (display (string-append + "#!" (which "sh") "\n" + "if [[ -z $CLASSPATH ]]; then\n" + " cp=\"" classpath "\"\n" + "else\n" + " cp=\"" classpath ":$CLASSPATH\"\n" + "fi\n" + "exec " (which "java") + " -cp $cp org.armedbear.lisp.Main $@\n"))))) + (chmod (string-append bin "abcl") #o755) + #t)))))) + (home-page "https://abcl.org/") + (synopsis "Common Lisp Implementation on the JVM") + (description + "@dfn{Armed Bear Common Lisp} (ABCL) is a full implementation of the Common +Lisp language featuring both an interpreter and a compiler, running in the +JVM. It supports JSR-223 (Java scripting API): it can be a scripting engine +in any Java application. Additionally, it can be used to implement (parts of) +the application using Java to Lisp integration APIs.") + (license (list license:gpl2+ + ;; named-readtables is released under 3 clause BSD + license:bsd-3 + ;; jfli is released under CPL 1.0 + license:cpl1.0)))) diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm index f517197021..6664620c04 100644 --- a/gnu/packages/linux.scm +++ b/gnu/packages/linux.scm @@ -36,6 +36,7 @@ ;;; Copyright © 2019 Maxim Cournoyer <maxim.cournoyer@gmail.com> ;;; Copyright © 2019 Stefan Stefanović <stefanx2ovic@gmail.com> ;;; Copyright © 2019 Pierre Langlois <pierre.langlois@gmx.com> +;;; Copyright © 2019 Brice Waegeneire <brice@waegenei.re> ;;; ;;; This file is part of GNU Guix. ;;; @@ -562,6 +563,13 @@ for ARCH and optionally VARIANT, or #f if there is no such configuration." (define %default-extra-linux-options `(;; Some very mild hardening. ("CONFIG_SECURITY_DMESG_RESTRICT" . #t) + ;; All kernels should have NAMESPACES options enabled + ("CONFIG_NAMESPACES" . #t) + ("CONFIG_UTS_NS" . #t) + ("CONFIG_IPC_NS" . #t) + ("CONFIG_USER_NS" . #t) + ("CONFIG_PID_NS" . #t) + ("CONFIG_NET_NS" . #t) ;; Modules required for initrd: ("CONFIG_NET_9P" . m) ("CONFIG_NET_9P_VIRTIO" . m) @@ -5985,3 +5993,43 @@ have to construct the archives directly, without using the archiver.") (description "inputattach dispatches input events from several device types and interfaces and translates so that the X server can use them.") (license license:gpl2+))) + +(define-public ell + (package + (name "ell") + (version "0.23") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://git.kernel.org/pub/scm/libs/ell/ell.git") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1qhlcwhn0gj877yss2ymx1aczghlddzb5v9mm1dgp2zliii3jy10")))) + (build-system gnu-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-dbus-tests + (lambda _ + (substitute* '("unit/test-dbus-message-fds.c" + "unit/test-dbus-properties.c" + "unit/test-dbus.c") + (("/usr/bin/dbus-daemon") (which "dbus-daemon"))) + #t))))) + (inputs + `(("dbus" ,dbus) + ("libtool" ,libtool))) + (native-inputs + `(("autoconf" ,autoconf) + ("pkgconfig" ,pkg-config) + ("automake" ,automake))) + (home-page "https://01.org/ell") + (synopsis "Embedded Linux Library") + (description "The Embedded Linux* Library (ELL) provides core, low-level +functionality for system daemons. It typically has no dependencies other than +the Linux kernel, C standard library, and libdl (for dynamic linking). While +ELL is designed to be efficient and compact enough for use on embedded Linux +platforms, it is not limited to resource-constrained systems.") + (license license:lgpl2.1+))) diff --git a/gnu/packages/lisp.scm b/gnu/packages/lisp.scm index 6c373ce6e2..ba009bb7a6 100644 --- a/gnu/packages/lisp.scm +++ b/gnu/packages/lisp.scm @@ -327,14 +327,14 @@ an interpreter, a compiler, a debugger, and much more.") (define-public sbcl (package (name "sbcl") - (version "1.5.6") + (version "1.5.7") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/sbcl/sbcl/" version "/sbcl-" version "-source.tar.bz2")) (sha256 - (base32 "10z43dc29p7s8dl3jixklhmzqfp7gcm3fccjdfd36qqhyfxqxx3a")) + (base32 "11cl839512898shxcgjmnn1178pwc8vcfaypmzxm1wzkwasjyx2l")) (modules '((guix build utils))) (snippet ;; Add sbcl-bundle-systems to 'default-system-source-registry'. diff --git a/gnu/packages/mail.scm b/gnu/packages/mail.scm index 6fa2832b5c..66b149f48a 100644 --- a/gnu/packages/mail.scm +++ b/gnu/packages/mail.scm @@ -2887,14 +2887,13 @@ servers. The 4rev1 and 4 versions of IMAP are supported.") (define-public urlscan (package (name "urlscan") - (version "0.9.2") + (version "0.9.4") (source (origin (method url-fetch) (uri (pypi-uri "urlscan" version)) (sha256 - (base32 - "1zldck7vnp7z04aacbx3cprf5kzha4gfhjmss4iv2lh5nccxjfzx")))) + (base32 "1q0vxv9haap01vz1cbkzss62cgwb9365lv5vnkg2gbpx4g5y7a9l")))) (build-system python-build-system) (propagated-inputs `(("python-urwid" ,python-urwid))) diff --git a/gnu/packages/markup.scm b/gnu/packages/markup.scm index 2b1e2ef63c..6f1f9f6f68 100644 --- a/gnu/packages/markup.scm +++ b/gnu/packages/markup.scm @@ -3,7 +3,7 @@ ;;; Copyright © 2015 David Thompson <davet@gnu.org> ;;; Copyright © 2016 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2017 ng0 <ng0@n0.is> -;;; Copyright © 2017, 2018 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2017, 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -23,6 +23,7 @@ (define-module (gnu packages markup) #:use-module (guix licenses) #:use-module (guix download) + #:use-module (guix git-download) #:use-module (guix packages) #:use-module (guix build-system gnu) #:use-module (guix build-system trivial) @@ -224,22 +225,22 @@ for parsing and rendering CommonMark.") (define-public smu (package (name "smu") - (version "1.4") + (version "1.5") (source (origin - (method url-fetch) - (uri (string-append "https://github.com/Gottox/smu/archive/v" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/Gottox/smu.git") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 - (base32 - "0iazl45rkz8ngsb5hpykl76w0ngvdvqqhym1qz5wykgmrzk293rp")))) + (base32 "1jm7lhnzjx4q7gcwlkvsbffcy0zppywyh50d71ami6dnq182vvcc")))) (build-system gnu-build-system) (arguments `(#:make-flags (list "CC=gcc" (string-append "PREFIX=" (assoc-ref %outputs "out"))) - #:tests? #f ;No tests included + #:tests? #f ; no tests included #:phases (modify-phases %standard-phases (delete 'configure)))) diff --git a/gnu/packages/maths.scm b/gnu/packages/maths.scm index ef50dfcded..357382f038 100644 --- a/gnu/packages/maths.scm +++ b/gnu/packages/maths.scm @@ -22,7 +22,7 @@ ;;; Copyright © 2017, 2019 Arun Isaac <arunisaac@systemreboot.net> ;;; Copyright © 2017, 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2017 Dave Love <me@fx@gnu.org> -;;; Copyright © 2018 Jan Nieuwenhuizen <janneke@gnu.org> +;;; Copyright © 2018, 2019 Jan Nieuwenhuizen <janneke@gnu.org> ;;; Copyright © 2018 Joshua Sierles, Nextjournal <joshua@nextjournal.com> ;;; Copyright © 2018 Nadya Voronova <voronovank@gmail.com> ;;; Copyright © 2018 Adam Massmann <massmannak@gmail.com> @@ -3645,7 +3645,7 @@ revised simplex and the branch-and-bound methods.") (define-public dealii (package (name "dealii") - (version "9.0.1") + (version "9.1.1") (source (origin (method url-fetch) @@ -3653,8 +3653,7 @@ revised simplex and the branch-and-bound methods.") "download/v" version "/dealii-" version ".tar.gz")) (sha256 (base32 - "0r7f8rhl3xr94imd372plizdcbqk0a70w73lwc3vw912dxk0sbyz")) - (patches (search-patches "dealii-mpi-deprecations.patch")) + "0xhjv0gzswpjbc43xbrpwfc5848g508l01855nszx3g5gwzlhnzw")) (modules '((guix build utils))) (snippet ;; Remove bundled sources: UMFPACK, TBB, muParser, and boost @@ -4116,7 +4115,7 @@ as equations, scalars, vectors, and matrices.") (define-public z3 (package (name "z3") - (version "4.8.4") + (version "4.8.6") (home-page "https://github.com/Z3Prover/z3") (source (origin (method git-fetch) @@ -4125,7 +4124,7 @@ as equations, scalars, vectors, and matrices.") (file-name (git-file-name name version)) (sha256 (base32 - "014igqm5vwswz0yhz0cdxsj3a6dh7i79hvhgc3jmmmz3z0xm1gyn")))) + "1sywcqj5y8yp28m4cdvzsgw74kd6zr1s3y1x17ky8pr9prvpvl6x")))) (build-system gnu-build-system) (arguments `(#:phases @@ -4316,7 +4315,7 @@ reduction.") (define-public mcrl2 (package (name "mcrl2") - (version "201707.1.15162") + (version "201908.0") (source (origin (method url-fetch) (uri (string-append "http://www.mcrl2.org/download/devel/mcrl2-" @@ -4324,9 +4323,7 @@ reduction.") ".tar.gz")) (sha256 (base32 - "1ziww2fchsklm25hl9p2mngssxfh9w07nc114cncqaxfibqp2p8f")))) - (native-inputs - `(("subversion" ,subversion))) + "1i4xgl2d5fgiz1mwi50cyfkrrcpm8nxfayfjgmhq7chs58wlhfsz")))) (inputs `(("boost" ,boost) ("glu" ,glu) @@ -4344,6 +4341,15 @@ analysed.") (home-page "https://mcrl2.org") (license license:boost1.0))) +(define-public mcrl2-minimal + (package + (inherit mcrl2) + (name "mcrl2-minimal") + (inputs + `(("boost" ,boost))) + (arguments + '(#:configure-flags '("-DMCRL2_ENABLE_GUI_TOOLS=OFF"))))) + (define-public r-subplex (package (name "r-subplex") diff --git a/gnu/packages/messaging.scm b/gnu/packages/messaging.scm index 7a77b45d1d..2cb357ff3a 100644 --- a/gnu/packages/messaging.scm +++ b/gnu/packages/messaging.scm @@ -491,14 +491,14 @@ compromised.") (define-public znc (package (name "znc") - (version "1.7.4") + (version "1.7.5") (source (origin (method url-fetch) (uri (string-append "http://znc.in/releases/archive/znc-" version ".tar.gz")) (sha256 (base32 - "0wcvqkpin8w4i72alnn0nxnrc9ih543qs34hqpk9xmz6m0hjk8xi")))) + "08a7yb2xs85hyyz8dpzfbsfjwj2r6kcii022lj3l4rf8hl9ix558")))) (build-system cmake-build-system) (arguments `(#:configure-flags diff --git a/gnu/packages/networking.scm b/gnu/packages/networking.scm index e49922a523..50afc2a547 100644 --- a/gnu/packages/networking.scm +++ b/gnu/packages/networking.scm @@ -2325,7 +2325,7 @@ SNMP v3 using both IPv4 and IPv6.") (define-public ubridge (package (name "ubridge") - (version "0.9.15") + (version "0.9.16") (source (origin (method git-fetch) @@ -2334,7 +2334,7 @@ SNMP v3 using both IPv4 and IPv6.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "0fl07zyall04map6v2l1bclqh8y3rrhsx61s2v0sr8b00j201jg4")))) + (base32 "1bind7ylgxs743vfdmpdrpp4iamy461bc3i7nxza91kj7hyyjz6h")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no tests diff --git a/gnu/packages/patches/abcl-fix-build-xml.patch b/gnu/packages/patches/abcl-fix-build-xml.patch new file mode 100644 index 0000000000..dd315b4271 --- /dev/null +++ b/gnu/packages/patches/abcl-fix-build-xml.patch @@ -0,0 +1,50 @@ +ABCL's build calls the hostname command, and needs the internet to download +JUnit. Neither of these are really required, though, so we can patch them out +to make it build. + +We also remove the Implemetation-Build property that ends up in the manifest +file, because it stores information about the time of the build, which makes +it non-deterministic. + +--- a/build.xml ++++ b/build.xml +@@ -327,7 +327,7 @@ from ${abcl.home.dir} + <property name="abcl.build.path" + value="${build.classes.dir}/org/armedbear/lisp/build"/> + <target name="abcl.stamp" +- depends="abcl.compile,abcl.stamp.version,abcl.stamp.hostname"> ++ depends="abcl.compile,abcl.stamp.version"> + <mkdir dir="${abcl.build.path}/.."/> + <loadfile property="abcl.version" + srcFile="${abcl.version.path}"/> +@@ -455,11 +455,6 @@ from ${abcl.home.dir} + value="${abcl.version}-${abcl.version.src}"/> + </target> + +- <target name="abcl.stamp.hostname" if="unix"> +- <exec executable="hostname" outputproperty="abcl.hostname"/> +- <echo>abcl.hostname: ${abcl.hostname}</echo> +- </target> +- + <target name="abcl.system.uptodate"> + <condition property="abcl.system.needs-update.p"> + <and> +@@ -500,8 +495,6 @@ from ${abcl.home.dir} + value="ABCL"/> + <attribute name="Implementation-Version" + value="${abcl.implementation.version}"/> +- <attribute name="Implementation-Build" +- value="${build}"/> + </section> + </manifest> + <metainf dir="${src.dir}/META-INF"> +@@ -1019,8 +1012,7 @@ ${basedir}/../cl-bench + </unzip> + </target> + +- <target name="abcl.test.compile" +- depends="abcl.test.pre-compile"> ++ <target name="abcl.test.compile" > + <mkdir dir="${abcl.test.classes.dir}"/> + <javac destdir="${abcl.test.classes.dir}" + classpathref="abcl.test.compile.classpath" diff --git a/gnu/packages/patches/dealii-mpi-deprecations.patch b/gnu/packages/patches/dealii-mpi-deprecations.patch deleted file mode 100644 index 816d54140a..0000000000 --- a/gnu/packages/patches/dealii-mpi-deprecations.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 40538ad31a71495649d174b0f7be5f7135d0a905 Mon Sep 17 00:00:00 2001 -From: David Wells <drwells@email.unc.edu> -Date: Sat, 2 Feb 2019 10:00:38 -0500 -Subject: [PATCH] Avoid calling a deprecated MPI function. - -This was deprecated a long time ago (1996) and is not present in the -latest version of openMPI (4.0): see - -https://www.open-mpi.org/faq/?category=mpi-removed - -Credit goes to Pratik Nayak for finding this issue. ---- - source/base/mpi.cc | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/source/base/mpi.cc b/source/base/mpi.cc -index bd1f7f9846a..b8cd45e7c26 100644 ---- a/source/base/mpi.cc -+++ b/source/base/mpi.cc -@@ -448,7 +448,7 @@ namespace Utilities - MPI_Aint displacements[] = {0, offsetof(MinMaxAvg, min_index)}; - MPI_Datatype types[] = {MPI_DOUBLE, MPI_INT}; - -- ierr = MPI_Type_struct(2, lengths, displacements, types, &type); -+ ierr = MPI_Type_create_struct(2, lengths, displacements, types, &type); - AssertThrowMPI(ierr); - - ierr = MPI_Type_commit(&type); diff --git a/gnu/packages/patches/mame-rapidjson-fix.patch b/gnu/packages/patches/mame-rapidjson-fix.patch deleted file mode 100644 index 70cf8458ea..0000000000 --- a/gnu/packages/patches/mame-rapidjson-fix.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 0b5b13cf1e28550b49c387dec93f9801f029e313 Mon Sep 17 00:00:00 2001 -From: Julian Sikorski <belegdol+github@gmail.com> -Date: Mon, 5 Aug 2019 21:16:54 +0200 -Subject: [PATCH] Fix building using system rapidjson - ---- - scripts/target/mame/arcade.lua | 1 + - src/mame/video/midtunit.cpp | 4 ++-- - 2 files changed, 3 insertions(+), 2 deletions(-) - -diff --git a/scripts/target/mame/arcade.lua b/scripts/target/mame/arcade.lua -index 964daa3572f..ef30ae3c2c2 100644 ---- a/scripts/target/mame/arcade.lua -+++ b/scripts/target/mame/arcade.lua -@@ -930,6 +930,7 @@ function createMAMEProjects(_target, _subtarget, _name) - ext_includedir("flac"), - ext_includedir("glm"), - ext_includedir("jpeg"), -+ ext_includedir("rapidjson"), - } - - end -diff --git a/src/mame/video/midtunit.cpp b/src/mame/video/midtunit.cpp -index b4cb98abacf..b307f3f722b 100644 ---- a/src/mame/video/midtunit.cpp -+++ b/src/mame/video/midtunit.cpp -@@ -20,8 +20,8 @@ - #include "emuopts.h" // Used by PNG logging - #include "png.h" // Used by PNG logging - --#include "rapidjson/include/rapidjson/prettywriter.h" // Used by JSON logging --#include "rapidjson/include/rapidjson/stringbuffer.h" // Used by JSON logging -+#include <rapidjson/prettywriter.h> // Used by JSON logging -+#include <rapidjson/stringbuffer.h> // Used by JSON logging - - DEFINE_DEVICE_TYPE(MIDTUNIT_VIDEO, midtunit_video_device, "tunitvid", "Midway T-Unit Video") - DEFINE_DEVICE_TYPE(MIDWUNIT_VIDEO, midwunit_video_device, "wunitvid", "Midway W-Unit Video") diff --git a/gnu/packages/pdf.scm b/gnu/packages/pdf.scm index 6dc8e7b145..003b5a9548 100644 --- a/gnu/packages/pdf.scm +++ b/gnu/packages/pdf.scm @@ -9,7 +9,7 @@ ;;; Copyright © 2016, 2017 Marius Bakke <mbakke@fastmail.com> ;;; Copyright © 2016, 2017 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2016 Julien Lepiller <julien@lepiller.eu> -;;; Copyright © 2016 Arun Isaac <arunisaac@systemreboot.net> +;;; Copyright © 2016, 2019 Arun Isaac <arunisaac@systemreboot.net> ;;; Copyright © 2017, 2018 Leo Famulari <leo@famulari.name> ;;; Copyright © 2017 Alex Vong <alexvong1995@gmail.com> ;;; Copyright © 2017, 2018 Rene Saavedra <pacoon@protonmail.com> @@ -1116,3 +1116,45 @@ presentation. The input files processed by pdfpc are PDF documents.") rendering of the file. The rendering is done by creating outline curves through the Pango @code{ft2} backend.") (license license:lgpl2.0+)))) + +(define-public stapler + (package + (name "stapler") + (version "0.3.2") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/hellerbarde/stapler") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "06w7xanzr7cicqik62g7zqs57j4y6fc7hflrc1rlmphxx40hkg6r")))) + (build-system python-build-system) + (inputs + `(("python2-pypdf2" ,python2-pypdf2))) + (arguments + `(#:python ,python-2 + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-pypdf-version-requirement + ;; A PyPDF2 version requirement of 1.25.1 is hard-coded in + ;; setup.py. Relax it to work with any version of PyPDF2. + (lambda _ + (substitute* "setup.py" + (("PyPDF2==1.25.1") "PyPDF2")) + #t))))) + (home-page "https://github.com/hellerbarde/stapler") + (synopsis "PDF manipulation tool") + (description "Stapler is a pure Python alternative to PDFtk, a tool for +manipulating PDF documents from the command line. It supports + +@itemize +@item cherry-picking pages and concatenating them into a new file +@item splitting a PDF document into single pages each in its own file +@item merging PDF documents with their pages interleaved +@item displaying metadata in a PDF document +@item displaying the mapping between logical and physical page numbers +@end itemize") + (license license:bsd-3))) diff --git a/gnu/packages/perl.scm b/gnu/packages/perl.scm index 77c8048e86..d33e49d39f 100644 --- a/gnu/packages/perl.scm +++ b/gnu/packages/perl.scm @@ -802,15 +802,14 @@ Perl.") (define-public perl-carp-clan (package (name "perl-carp-clan") - (version "6.07") + (version "6.08") (source (origin (method url-fetch) (uri (string-append "mirror://cpan/authors/id/E/ET/ETHER/" "Carp-Clan-" version ".tar.gz")) (sha256 - (base32 - "0gaa4ygd9q8lp2fn5d9s7miiwxz92a2lqs7j6smwmifq6w3mc20a")))) + (base32 "0237xx3rqa72sr4vdvws9r1m453h5f25bl85mdjmmk128kir4py7")))) (build-system perl-build-system) (native-inputs `(("perl-test-exception" ,perl-test-exception))) diff --git a/gnu/packages/ssh.scm b/gnu/packages/ssh.scm index 596bc55a12..00e768d727 100644 --- a/gnu/packages/ssh.scm +++ b/gnu/packages/ssh.scm @@ -70,7 +70,7 @@ (define-public libssh (package (name "libssh") - (version "0.8.7") + (version "0.9.0") (source (origin (method git-fetch) (uri (git-reference @@ -78,7 +78,7 @@ (commit (string-append "libssh-" version)))) (sha256 (base32 - "1iqik1ba0g008k1mb1n85iih1azi7giy0c485jnlmsrjxik4q3j2")) + "0hxws8vl56cbjwchmj0x78ywv2b8spv6h90sgma1vj1y9dybgs7s")) (file-name (git-file-name name version)))) (build-system cmake-build-system) (outputs '("out" "debug")) @@ -314,9 +314,6 @@ programs written in GNU Guile interpreter. It is a wrapper to the underlying libssh library.") (license license:gpl3+))) -(define-public guile2.2-ssh - (deprecated-package "guile2.2-ssh" guile-ssh)) - (define-public guile2.0-ssh (package (inherit guile-ssh) diff --git a/gnu/packages/statistics.scm b/gnu/packages/statistics.scm index 74eb466066..e4a4817327 100644 --- a/gnu/packages/statistics.scm +++ b/gnu/packages/statistics.scm @@ -612,14 +612,14 @@ nonlinear mixed-effects models.") (define-public r-mgcv (package (name "r-mgcv") - (version "1.8-28") + (version "1.8-29") (source (origin (method url-fetch) (uri (cran-uri "mgcv" version)) (sha256 (base32 - "1snkpnkkigwrj9zm31j1nlivv9ls56imz263cv167hnmghiahpmm")))) + "1236gz25nap1aprbvcrqvmmnl6f8cvbjy8dcl4j968cpalqax5ww")))) (build-system r-build-system) (propagated-inputs `(("r-matrix" ,r-matrix) @@ -805,13 +805,13 @@ effects of different types of color-blindness.") (define-public r-digest (package (name "r-digest") - (version "0.6.20") + (version "0.6.21") (source (origin (method url-fetch) (uri (cran-uri "digest" version)) (sha256 - (base32 "1irhk2jaj9cg57cxprgyn1if06x121xwcxh1fzzn3148bl5lnrq5")))) + (base32 "0qycqchmv59fb6jp369d82mcx9xgbv70m18qzam0vrs8zkmajb17")))) (build-system r-build-system) ;; Vignettes require r-knitr, which requires r-digest, so we have to ;; disable them and the tests. @@ -1451,13 +1451,13 @@ emitter (http://pyyaml.org/wiki/LibYAML) for R.") (define-public r-knitr (package (name "r-knitr") - (version "1.24") + (version "1.25") (source (origin (method url-fetch) (uri (cran-uri "knitr" version)) (sha256 (base32 - "12bvs9fd61m7k7bq321qzrh2ccl9rq653s1anrvfb9s5ni1j0378")))) + "0lsc201a4f6xksmsklhr6gmhl0mxih0xhlcdvhs2ypzcx1pvkpnv")))) (build-system r-build-system) (propagated-inputs `(("r-evaluate" ,r-evaluate) @@ -1503,13 +1503,13 @@ from knitr Rmarkdown.") (define-public r-microbenchmark (package (name "r-microbenchmark") - (version "1.4-6") + (version "1.4-7") (source (origin (method url-fetch) (uri (cran-uri "microbenchmark" version)) (sha256 (base32 - "1sn1fxgzakm5iqbgc35g3k4yi0iqrkmwz33cvdrphrzh1lxnmi3s")))) + "1xl4m4yl4h2zcjiz8wsa7f3sh55qg2xr3sgpvz18rlix6b3173r6")))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/microbenchmark/") (synopsis "Accurate timing functions for R") @@ -2438,13 +2438,13 @@ informative error messages when it's not available.") (define-public r-devtools (package (name "r-devtools") - (version "2.2.0") + (version "2.2.1") (source (origin (method url-fetch) (uri (cran-uri "devtools" version)) (sha256 (base32 - "05fag25mkqy13yja8x32aqr9c0ah9rbm8cfjcsmy1dv5h4j8cxa1")))) + "0i2f549hxkn0j1x1avkhwy68c9r48v9284j7x9cak2q6dfsqz61f")))) (build-system r-build-system) (propagated-inputs `(("r-callr" ,r-callr) @@ -2463,8 +2463,9 @@ informative error messages when it's not available.") ("r-pkgbuild" ,r-pkgbuild) ("r-pkgload" ,r-pkgload) ("r-rcmdcheck" ,r-rcmdcheck) - ("r-roxygen2" ,r-roxygen2) ("r-remotes" ,r-remotes) + ("r-rlang" ,r-rlang) + ("r-roxygen2" ,r-roxygen2) ("r-rstudioapi" ,r-rstudioapi) ("r-rversions" ,r-rversions) ("r-sessioninfo" ,r-sessioninfo) @@ -2780,13 +2781,13 @@ and draw tables.") (define-public r-pkgconfig (package (name "r-pkgconfig") - (version "2.0.2") + (version "2.0.3") (source (origin (method url-fetch) (uri (cran-uri "pkgconfig" version)) (sha256 (base32 - "1jk9ip549xphb3anfixqv1yx5kidnndqgy9v3qjpmgmds5a7g695")))) + "0l1qph8zyi2sic3k2qcd7vlfl7rzfh1q7z7zvjkl5f7y1x2fy3rk")))) (build-system r-build-system) (home-page "https://github.com/gaborcsardi/pkgconfig") (synopsis "Private configuration for R packages") @@ -2947,13 +2948,13 @@ plotted and compared with the asymptotic curve.") (define-public r-lambda-r (package (name "r-lambda-r") - (version "1.2.3") + (version "1.2.4") (source (origin (method url-fetch) (uri (cran-uri "lambda.r" version)) (sha256 (base32 - "0cc6pszs6yccn0hgjpyn9gspv9aiva9d91ba0640i5m0l5xy7n0c")))) + "1mh1g0gsd58gng0hb29vww2yqb2jfs07kba5kxnnqck5j3izwlnj")))) (properties `((upstream-name . "lambda.r"))) (build-system r-build-system) (propagated-inputs @@ -3174,13 +3175,13 @@ using the multicore functionality of the parallel package.") (define-public r-dt (package (name "r-dt") - (version "0.8") + (version "0.9") (source (origin (method url-fetch) (uri (cran-uri "DT" version)) (sha256 (base32 - "08cfmv3d5awvd9h8648bvidcg2ak5pvl2p6vqwqwy1l82ia506ch")))) + "17han4560jv8mmfn4f8adrwh0x25fxz2qwd0sv7vv4iky5and8a7")))) (properties `((upstream-name . "DT"))) (build-system r-build-system) diff --git a/gnu/packages/textutils.scm b/gnu/packages/textutils.scm index 9ce01e66ea..79cf172179 100644 --- a/gnu/packages/textutils.scm +++ b/gnu/packages/textutils.scm @@ -89,18 +89,14 @@ to DOS format and vice versa.") (define-public recode (package (name "recode") - (version "3.7.5") + (version "3.7.6") (source (origin (method url-fetch) (uri (string-append "https://github.com/rrthomas/recode/releases/" "download/v" version "/recode-" version ".tar.gz")) (sha256 - (base32 "1sl99dfx2b76paq86wv3a0lcy66f1hylf6iy04rzwxj7ccwpsk30")) - (modules '((guix build utils))) - (snippet '(begin - (delete-file "tests/Recode.c") - #t)))) + (base32 "0m59sd1ca0zw1aydpc3m8sw03nc885knmccqryg7byzmqs585ia6")))) (build-system gnu-build-system) (native-inputs `(("python" ,python) diff --git a/gnu/packages/tls.scm b/gnu/packages/tls.scm index 4f7b67cf46..466976bccc 100644 --- a/gnu/packages/tls.scm +++ b/gnu/packages/tls.scm @@ -1,5 +1,5 @@ ;;; GNU Guix --- Functional package management for GNU -;;; Copyright © 2012, 2013, 2014, 2015, 2016, 2017 Ludovic Courtès <ludo@gnu.org> +;;; Copyright © 2012, 2013, 2014, 2015, 2016, 2017, 2019 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2014, 2015, 2016, 2017, 2018 Mark H Weaver <mhw@netris.org> ;;; Copyright © 2014 Ian Denhardt <ian@zenhack.net> ;;; Copyright © 2013, 2015 Andreas Enge <andreas@enge.fr> @@ -244,9 +244,6 @@ required structures.") (properties '((ftp-server . "ftp.gnutls.org") (ftp-directory . "/gcrypt/gnutls"))))) -(define-public gnutls/guile-2.2 - (deprecated-package "guile2.2-gnutls" gnutls)) - (define-public gnutls/guile-2.0 ;; GnuTLS for Guile 2.0. (package diff --git a/gnu/packages/video.scm b/gnu/packages/video.scm index 374de42600..42403087cb 100644 --- a/gnu/packages/video.scm +++ b/gnu/packages/video.scm @@ -1671,7 +1671,7 @@ audio, images) from the Web. It can use either mpv or vlc for playback.") (define-public youtube-viewer (package (name "youtube-viewer") - (version "3.5.4") + (version "3.5.8") (source (origin (method git-fetch) (uri (git-reference @@ -1680,7 +1680,7 @@ audio, images) from the Web. It can use either mpv or vlc for playback.") (file-name (git-file-name name version)) (sha256 (base32 - "1j782m9rximybamd0qsc43hi7hgk333x9gy3ypzb61s0sifs0i6m")))) + "0zz0r3vd2pg9zzykhrq0vnvqp5842dbgsg8cfygw9vzb9j8mlq0a")))) (build-system perl-build-system) (native-inputs `(("perl-module-build" ,perl-module-build))) diff --git a/gnu/packages/virtualization.scm b/gnu/packages/virtualization.scm index 532f8ff95c..fd442bde4b 100644 --- a/gnu/packages/virtualization.scm +++ b/gnu/packages/virtualization.scm @@ -1050,7 +1050,7 @@ virtual machines.") (define-public bubblewrap (package (name "bubblewrap") - (version "0.3.1") + (version "0.3.3") (source (origin (method url-fetch) (uri (string-append "https://github.com/projectatomic/bubblewrap/" @@ -1058,7 +1058,7 @@ virtual machines.") version ".tar.xz")) (sha256 (base32 - "1y2bdlxnlr84xcbf31lzirc292c5ak9bd2wvcvh4ppsliih6pjny")))) + "1zsd6rxryg97dkkhibr0fvq16x3s75qj84rvhdv8p42ag58mz966")))) (build-system gnu-build-system) (arguments `(#:phases @@ -1078,6 +1078,9 @@ virtual machines.") ;; Some tests try to access /usr, but that doesn't exist. ;; Give them /gnu instead. (("/usr") "/gnu") + (("--ro-bind /bin /bin") "--ro-bind /gnu /bin") + (("--ro-bind /sbin /sbin") "--ro-bind /gnu /sbin") + (("--ro-bind /lib /lib") "--ro-bind /gnu /lib") ((" */bin/bash") (which "bash")) (("/bin/sh") (which "sh")) (("findmnt") (which "findmnt")))) diff --git a/gnu/packages/xdisorg.scm b/gnu/packages/xdisorg.scm index 619c9b102a..542cb3bb63 100644 --- a/gnu/packages/xdisorg.scm +++ b/gnu/packages/xdisorg.scm @@ -26,6 +26,7 @@ ;;; Copyright © 2018, 2019 Pierre Neidhardt <mail@ambrevar.xyz> ;;; Copyright © 2018 Nam Nguyen <namn@berkeley.edu> ;;; Copyright © 2019 Wiktor Żelazny <wzelazny@vurv.cz> +;;; Copyright © 2019 Kyle Andrews <kyle.c.andrews@gmail.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -83,6 +84,7 @@ #:use-module (gnu packages xml) #:use-module (gnu packages gtk) #:use-module (gnu packages xorg) + #:use-module (gnu packages fontutils) #:use-module (gnu packages bison) #:use-module (ice-9 match)) @@ -1322,6 +1324,46 @@ program for X11. It was designed to be fast, tiny and scriptable in any languag (home-page "https://github.com/robm/dzen") (license license:expat)))) +(define-public xftwidth + (package + (name "xftwidth") + (version "20170402") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "http://github.com/vixus0/xftwidth") + (commit "35ff963908d41a8a6a7101c434c88255728025ee"))) + (sha256 + (base32 + "1jwl25785li24kbp0m1wxfwk4dgxkliynn03nsj813cjr34kq16h")) + (file-name (string-append name "-" version "-checkout")))) + (build-system gnu-build-system) + (inputs `(("freetype" ,freetype) + ("libx11" ,libx11) + ("fontconfig" ,fontconfig) + ("libxft" ,libxft))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (arguments + '(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-makefile ; /usr/bin doesn't show up in PATH + (lambda _ (substitute* "Makefile" (("usr/") "")) #t)) + (delete 'check) ; no check included in Makefile + (delete 'configure)) + #:make-flags + (let ((out (assoc-ref %outputs "out"))) + (list (string-append "DESTDIR=" out))))) + (synopsis "Calculator for determining pixel widths of displayed text using Xft fonts") + (description "xftwidth is a small C program for calculating the pixel +widths of displayed text using Xft fonts. It is especially useful in scripts +for displaying text in graphical panels, menus, popups, and notification +windows generated using dzen. These scripts are often used in conjunction with +minimalistic tiling window managers such as herbstluftwm and bspwm.") + (home-page "http://github.com/vixus0/xftwidth") + (license license:expat))) + (define-public xcb-util-xrm (package (name "xcb-util-xrm") diff --git a/gnu/packages/xorg.scm b/gnu/packages/xorg.scm index 273788f615..3bc83a6175 100644 --- a/gnu/packages/xorg.scm +++ b/gnu/packages/xorg.scm @@ -838,7 +838,7 @@ For example: @code{6x10}, @code{9x15bold}, etc.") (define-public font-util (package (name "font-util") - (version "1.3.1") + (version "1.3.2") (source (origin (method url-fetch) @@ -847,8 +847,7 @@ For example: @code{6x10}, @code{9x15bold}, etc.") version ".tar.bz2")) (sha256 - (base32 - "08drjb6cf84pf5ysghjpb4i7xkd2p86k3wl2a0jxs1jif6qbszma")))) + (base32 "10i2a8b3d1h3w7klsqf31iz7zbd6l8wglil54fkhdb1385281n1s")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) (home-page "https://www.x.org/wiki/") diff --git a/guix/build/compile.scm b/guix/build/compile.scm index c127456fd0..06ed57c9d7 100644 --- a/guix/build/compile.scm +++ b/guix/build/compile.scm @@ -169,11 +169,12 @@ BUILD-DIRECTORY, using up to WORKERS parallel workers. The resulting object files are for HOST, a GNU triplet such as \"x86_64-linux-gnu\"." (define progress-lock (make-mutex)) (define total (length files)) - (define completed 0) + (define progress 0) (define (build file) (with-mutex progress-lock - (report-compilation file total completed)) + (report-compilation file total progress) + (set! progress (+ 1 progress))) ;; Exit as soon as something goes wrong. (exit-on-exception @@ -185,9 +186,7 @@ files are for HOST, a GNU triplet such as \"x86_64-linux-gnu\"." #:output-file (string-append build-directory "/" (scm->go relative)) #:opts (append warning-options - (optimization-options relative))))))) - (with-mutex progress-lock - (set! completed (+ 1 completed)))) + (optimization-options relative)))))))) (with-augmented-search-path %load-path source-directory (with-augmented-search-path %load-compiled-path build-directory diff --git a/guix/scripts/offload.scm b/guix/scripts/offload.scm index 0c0dd9d516..bb307cefd1 100644 --- a/guix/scripts/offload.scm +++ b/guix/scripts/offload.scm @@ -243,7 +243,8 @@ instead of '~a' of type '~a'~%") ;; of these; if we fail, that means all the build slots are already taken. ;; Inspired by Nix's build-remote.pl. (string-append (string-append %state-directory "/offload/" - (build-machine-name machine) + (build-machine-name machine) ":" + (number->string (build-machine-port machine)) "/" (number->string slot)))) (define (acquire-build-slot machine) diff --git a/guix/scripts/pull.scm b/guix/scripts/pull.scm index 0372278705..e018985469 100644 --- a/guix/scripts/pull.scm +++ b/guix/scripts/pull.scm @@ -304,7 +304,7 @@ to display." (new (let ((count (length new))) (format (current-error-port) - (N_ " ~*One new channel:~%" + (N_ " ~a new channel:~%" " ~a new channels:~%" count) count) (for-each display-channel new)))) diff --git a/guix/ui.scm b/guix/ui.scm index 069d542131..3e4bd5787e 100644 --- a/guix/ui.scm +++ b/guix/ui.scm @@ -867,6 +867,17 @@ warning." ('profile-hook #t) (_ #f))) +(define (colorize-store-file-name file) + "Colorize FILE, a store file name, such that the hash part is less prominent +that the rest." + (let ((len (string-length file)) + (prefix (+ (string-length (%store-prefix)) 32 2))) + (if (< len prefix) + file + (string-append (colorize-string (string-take file prefix) + (color DARK)) + (string-drop file prefix))))) + (define* (show-what-to-build store drv #:key dry-run? (use-substitutes? #t) (mode (build-mode normal))) @@ -890,6 +901,11 @@ check and report what is prerequisites are available for download." (substitution-oracle store inputs #:mode mode) (const #f))) + (define colorized-store-item + (if (color-output? (current-error-port)) + colorize-store-file-name + identity)) + (let*-values (((build download) (derivation-build-plan store inputs #:mode mode @@ -935,7 +951,7 @@ check and report what is prerequisites are available for download." (N_ "~:[The following derivation would be built:~%~{ ~a~%~}~;~]" "~:[The following derivations would be built:~%~{ ~a~%~}~;~]" (length build)) - (null? build) build) + (null? build) (map colorized-store-item build)) (if display-download-size? (format (current-error-port) ;; TRANSLATORS: "MB" is for "megabyte"; it should be @@ -943,29 +959,31 @@ check and report what is prerequisites are available for download." (G_ "~:[~,1h MB would be downloaded:~%~{ ~a~%~}~;~]") (null? download) download-size - (map substitutable-path download)) + (map (compose colorized-store-item substitutable-path) + download)) (format (current-error-port) (N_ "~:[The following file would be downloaded:~%~{ ~a~%~}~;~]" "~:[The following files would be downloaded:~%~{ ~a~%~}~;~]" (length download)) (null? download) - (map substitutable-path download))) + (map (compose colorized-store-item substitutable-path) + download))) (format (current-error-port) (N_ "~:[The following graft would be made:~%~{ ~a~%~}~;~]" "~:[The following grafts would be made:~%~{ ~a~%~}~;~]" (length graft)) - (null? graft) graft) + (null? graft) (map colorized-store-item graft)) (format (current-error-port) (N_ "~:[The following profile hook would be built:~%~{ ~a~%~}~;~]" "~:[The following profile hooks would be built:~%~{ ~a~%~}~;~]" (length hook)) - (null? hook) hook)) + (null? hook) (map colorized-store-item hook))) (begin (format (current-error-port) (N_ "~:[The following derivation will be built:~%~{ ~a~%~}~;~]" "~:[The following derivations will be built:~%~{ ~a~%~}~;~]" (length build)) - (null? build) build) + (null? build) (map colorized-store-item build)) (if display-download-size? (format (current-error-port) ;; TRANSLATORS: "MB" is for "megabyte"; it should be @@ -973,23 +991,25 @@ check and report what is prerequisites are available for download." (G_ "~:[~,1h MB will be downloaded:~%~{ ~a~%~}~;~]") (null? download) download-size - (map substitutable-path download)) + (map (compose colorized-store-item substitutable-path) + download)) (format (current-error-port) (N_ "~:[The following file will be downloaded:~%~{ ~a~%~}~;~]" "~:[The following files will be downloaded:~%~{ ~a~%~}~;~]" (length download)) (null? download) - (map substitutable-path download))) + (map (compose colorized-store-item substitutable-path) + download))) (format (current-error-port) (N_ "~:[The following graft will be made:~%~{ ~a~%~}~;~]" "~:[The following grafts will be made:~%~{ ~a~%~}~;~]" (length graft)) - (null? graft) graft) + (null? graft) (map colorized-store-item graft)) (format (current-error-port) (N_ "~:[The following profile hook will be built:~%~{ ~a~%~}~;~]" "~:[The following profile hooks will be built:~%~{ ~a~%~}~;~]" (length hook)) - (null? hook) hook))) + (null? hook) (map colorized-store-item hook)))) (check-available-space installed-size) diff --git a/nix/libstore/build.cc b/nix/libstore/build.cc index ad53b81413..74cd05417f 100644 --- a/nix/libstore/build.cc +++ b/nix/libstore/build.cc @@ -1648,7 +1648,7 @@ HookReply DerivationGoal::tryBuildHook() set<int> fds; fds.insert(hook->fromHook.readSide); fds.insert(hook->builderOut.readSide); - worker.childStarted(shared_from_this(), hook->pid, fds, false, false); + worker.childStarted(shared_from_this(), hook->pid, fds, false, true); if (settings.printBuildTrace) printMsg(lvlError, format("@ build-started %1% - %2% %3% %4%") |