diff options
36 files changed, 2666 insertions, 104 deletions
diff --git a/Makefile.am b/Makefile.am index eda87f3124..69e66fad75 100644 --- a/Makefile.am +++ b/Makefile.am @@ -410,6 +410,7 @@ SH_TESTS = \ tests/guix-gc.sh \ tests/guix-hash.sh \ tests/guix-pack.sh \ + tests/guix-pack-localstatedir.sh \ tests/guix-pack-relocatable.sh \ tests/guix-package.sh \ tests/guix-package-net.sh \ @@ -600,13 +601,11 @@ AM_DISTCHECK_CONFIGURE_FLAGS = \ --enable-daemon \ ac_cv_guix_test_root="$(GUIX_TEST_ROOT)" -# The self-contained tarball. Add 'glibc-utf8-locales' along with glibc just -# so 'etc/profile' defines 'GUIX_LOCPATH' pointing to a valid set of locales. +# The self-contained tarball. guix-binary.%.tar.xz: $(AM_V_GEN)GUIX_PACKAGE_PATH= \ tarball=`$(top_builddir)/pre-inst-env guix pack -K -C xz \ - -s "$*" --localstatedir guix glibc-utf8-locales \ - -e '(@@ (gnu packages commencement) glibc-final)'` ; \ + -s "$*" --localstatedir --profile-name=current-guix guix` ; \ cp "$$tarball" "$@.tmp" ; mv "$@.tmp" "$@" diff --git a/NEWS b/NEWS index 891eb9e57a..11a649a6da 100644 --- a/NEWS +++ b/NEWS @@ -15,11 +15,57 @@ Please send Guix bug reports to bug-guix@gnu.org. ** Package management +*** ‘guix pull -l’ lists new and upgraded packages +*** ‘guix pull’ now supports channels via ~/.config/guix/channels.scm +*** New ‘--profile’ or ‘-p’ option for ‘guix pull’ +*** New ‘guix describe’ command +*** ‘guix package’ no longer shows build logs by default +*** ‘guix’ commands now produce colored output by default +*** Manifests can now refer to arbitrary Guix commits using “inferiors” +*** New ‘guix processes’ command +*** ‘guix pack’ now honors ‘--localstatedir’ for all its backends *** ‘guix import pypi’ has a new ‘--recursive’ option *** ‘guix import hackage’ has a new ‘--recursive’ option *** ‘guix import stackage’ has a new ‘--recursive’ option The short option for ‘--lts-version’ is now ‘-l’ (used to be ‘-r’). +*** ‘guix refresh’ now stores upstream keys in ~/.config/guix/upstream +*** Guix now depends on Guile-Gcrypt +** Distribution + +*** The GNU Shepherd was upgraded to 0.5.0 +*** ‘guix system reconfigure’ now loads Shepherd service replacements +*** ‘herd schedule mcron’ now displays mcron’s job schedule +*** ‘herd statistics nscd’ now displays nscd statistics +*** ‘herd invalidate nscd TABLE’ instructs nscd to invalidate TABLE +*** New services + +gitolite, iptables, pcscd, prometheus-node-exporter, varnish + +** Programming interfaces + +*** New (guix channels) module +*** New (guix inferior) module +*** New (guix status) module +*** ‘packages->manifest’ now accepts inferior packages +*** New build systems: ‘clojure’, ‘guile’ +*** Shepherd services can now declare custom actions +*** More of the (gnu system …) APIs are now non-monadic +*** New ‘add-file-tree-to-store’ procedure in (guix store) + +** Noteworthy bug fixes + +** Native language support + +*** The manual is now partially translated into German, in addition to French + +To read the German manual, just type “info guix.de” or read it on-line at +<https://gnu.org/s/guix/manual/de/html_node>. Consider translating the manual +to your native language by joining the Translation Project: +<https://translationproject.org/domain/guix-manual.html>. + +*** Updated translations: +*** New translations: * Changes in 0.15.0 (since 0.14.0) diff --git a/README b/README index 4c76c4bc43..a7a818c5c8 100644 --- a/README +++ b/README @@ -24,7 +24,7 @@ GNU Guix currently depends on the following packages: - [[https://notabug.org/cwebber/guile-gcrypt][Guile-Gcrypt]] 0.1.0 or later - [[https://www.gnu.org/software/make/][GNU Make]] - [[https://www.gnutls.org][GnuTLS]] compiled with guile support enabled - - [[https://notabug.org/civodul/guile-sqlite3][Guile-SQLite3]], version 0.1.0 or later + - [[https://notabug.org/guile-sqlite3/guile-sqlite3][Guile-SQLite3]], version 0.1.0 or later - [[https://gitlab.com/guile-git/guile-git][Guile-Git]] - [[http://www.zlib.net/][zlib]] - optionally [[https://savannah.nongnu.org/projects/guile-json/][Guile-JSON]], for the 'guix import pypi' command diff --git a/doc/guix.texi b/doc/guix.texi index 082e81bf7c..e783c16365 100644 --- a/doc/guix.texi +++ b/doc/guix.texi @@ -499,18 +499,20 @@ archive content is independent of its creation time, thus making it reproducible. @item -Make @code{root}'s profile available under @file{~root/.guix-profile}: +Make the profile available under @file{~root/.config/guix/current}, which is +where @command{guix pull} will install updates (@pxref{Invoking guix pull}): @example -# ln -sf /var/guix/profiles/per-user/root/guix-profile \ - ~root/.guix-profile +# mkdir -p ~root/.config/guix +# ln -sf /var/guix/profiles/per-user/root/current-guix \ + ~root/.config/guix/current @end example Source @file{etc/profile} to augment @code{PATH} and other relevant environment variables: @example -# GUIX_PROFILE="`echo ~root`/.guix-profile" ; \ +# GUIX_PROFILE="`echo ~root`/.config/guix/current" ; \ source $GUIX_PROFILE/etc/profile @end example @@ -532,8 +534,8 @@ with these commands: @c http://lists.gnu.org/archive/html/guix-devel/2017-01/msg01199.html @example -# cp ~root/.guix-profile/lib/systemd/system/guix-daemon.service \ - /etc/systemd/system/ +# cp ~root/.config/guix/current/lib/systemd/system/guix-daemon.service \ + /etc/systemd/system/ # systemctl start guix-daemon && systemctl enable guix-daemon @end example @@ -541,14 +543,16 @@ If your host distro uses the Upstart init system: @example # initctl reload-configuration -# cp ~root/.guix-profile/lib/upstart/system/guix-daemon.conf /etc/init/ +# cp ~root/.config/guix/current/lib/upstart/system/guix-daemon.conf \ + /etc/init/ # start guix-daemon @end example Otherwise, you can still start the daemon manually with: @example -# ~root/.guix-profile/bin/guix-daemon --build-users-group=guixbuild +# ~root/.config/guix/current/bin/guix-daemon \ + --build-users-group=guixbuild @end example @item @@ -558,7 +562,7 @@ for instance with: @example # mkdir -p /usr/local/bin # cd /usr/local/bin -# ln -s /var/guix/profiles/per-user/root/guix-profile/bin/guix +# ln -s /var/guix/profiles/per-user/root/current-guix/bin/guix @end example It is also a good idea to make the Info version of this manual available @@ -567,7 +571,7 @@ there: @example # mkdir -p /usr/local/share/info # cd /usr/local/share/info -# for i in /var/guix/profiles/per-user/root/guix-profile/share/info/* ; +# for i in /var/guix/profiles/per-user/root/current-guix/share/info/* ; do ln -s $i ; done @end example @@ -582,7 +586,8 @@ To use substitutes from @code{hydra.gnu.org} or one of its mirrors (@pxref{Substitutes}), authorize them: @example -# guix archive --authorize < ~root/.guix-profile/share/guix/hydra.gnu.org.pub +# guix archive --authorize < \ + ~root/.config/guix/current/share/guix/hydra.gnu.org.pub @end example @item @@ -616,7 +621,8 @@ make guix-binary.@var{system}.tar.xz ... which, in turn, runs: @example -guix pack -s @var{system} --localstatedir guix +guix pack -s @var{system} --localstatedir \ + --profile-name=current-guix guix @end example @xref{Invoking guix pack}, for more info on this handy tool. @@ -641,7 +647,7 @@ later, including 2.2.x; (@pxref{Guile Preparations, how to install the GnuTLS bindings for Guile,, gnutls-guile, GnuTLS-Guile}); @item -@uref{https://notabug.org/civodul/guile-sqlite3, Guile-SQLite3}, version 0.1.0 +@uref{https://notabug.org/guile-sqlite3/guile-sqlite3, Guile-SQLite3}, version 0.1.0 or later; @item @c FIXME: Specify a version number once a release has been made. @@ -3273,7 +3279,12 @@ produce human-readable output; @item channels produce a list of channel specifications that can be passed to @command{guix pull -C} or installed as @file{~/.config/guix/channels.scm} (@pxref{Invoking -guix pull}). +guix pull}); +@item json +@cindex JSON +produce a list of channel specifications in JSON format; +@item recutils +produce a list of channel specifications in Recutils format. @end table @item --profile=@var{profile} @@ -3483,8 +3494,11 @@ For instance, @code{-S /opt/gnu/bin=bin} creates a @file{/opt/gnu/bin} symlink pointing to the @file{bin} sub-directory of the profile. @item --localstatedir -Include the ``local state directory'', @file{/var/guix}, in the -resulting pack. +@itemx --profile-name=@var{name} +Include the ``local state directory'', @file{/var/guix}, in the resulting +pack, and notably the @file{/var/guix/profiles/per-user/root/@var{name}} +profile---by default @var{name} is @code{guix-profile}, which corresponds to +@file{~root/.guix-profile}. @file{/var/guix} contains the store database (@pxref{The Store}) as well as garbage-collector roots (@pxref{Invoking guix gc}). Providing it in diff --git a/etc/guix-daemon.conf.in b/etc/guix-daemon.conf.in index 74706055f8..755192d555 100644 --- a/etc/guix-daemon.conf.in +++ b/etc/guix-daemon.conf.in @@ -7,4 +7,4 @@ start on runlevel [2345] stop on runlevel [016] -exec @localstatedir@/guix/profiles/per-user/root/guix-profile/bin/guix-daemon --build-users-group=guixbuild +exec @localstatedir@/guix/profiles/per-user/root/current-guix/bin/guix-daemon --build-users-group=guixbuild diff --git a/etc/guix-daemon.service.in b/etc/guix-daemon.service.in index 988cf90c00..99ec7c48f8 100644 --- a/etc/guix-daemon.service.in +++ b/etc/guix-daemon.service.in @@ -6,8 +6,8 @@ Description=Build daemon for GNU Guix [Service] -ExecStart=@localstatedir@/guix/profiles/per-user/root/guix-profile/bin/guix-daemon --build-users-group=guixbuild -Environment=GUIX_LOCPATH=/root/.guix-profile/lib/locale +ExecStart=@localstatedir@/guix/profiles/per-user/root/current-guix/bin/guix-daemon --build-users-group=guixbuild +Environment=GUIX_LOCPATH=@localstatedir@/guix/profiles/per-user/root/guix-profile/lib/locale RemainAfterExit=yes StandardOutput=syslog StandardError=syslog diff --git a/etc/guix-install.sh b/etc/guix-install.sh index ca6874ba0f..6a01e59723 100755 --- a/etc/guix-install.sh +++ b/etc/guix-install.sh @@ -269,12 +269,13 @@ sys_create_store() fi _msg "${INF}Linking the root user's profile" - ln -sf /var/guix/profiles/per-user/root/guix-profile \ - "${ROOT_HOME}/.guix-profile" + mkdir -p "${ROOT_HOME}/.config/guix" + ln -sf /var/guix/profiles/per-user/root/current-guix \ + "${ROOT_HOME}/.config/guix/current" - GUIX_PROFILE="${ROOT_HOME}/.guix-profile" + GUIX_PROFILE="${ROOT_HOME}/.config/guix/current" source "${GUIX_PROFILE}/etc/profile" - _msg "${PAS}activated root profile at /root/.guix-profile" + _msg "${PAS}activated root profile at ${ROOT_HOME}/.config/guix/current" } sys_create_build_user() @@ -317,18 +318,18 @@ sys_enable_guix_daemon() info_path="/usr/local/share/info" local_bin="/usr/local/bin" - var_guix="/var/guix/profiles/per-user/root/guix-profile" + var_guix="/var/guix/profiles/per-user/root/current-guix" case "$INIT_SYS" in upstart) { initctl reload-configuration; - cp "${ROOT_HOME}/.guix-profile/lib/upstart/system/guix-daemon.conf" \ + cp "${ROOT_HOME}/.config/guix/current/lib/upstart/system/guix-daemon.conf" \ /etc/init/ && start guix-daemon; } && _msg "${PAS}enabled Guix daemon via upstart" ;; systemd) - { cp "${ROOT_HOME}/.guix-profile/lib/systemd/system/guix-daemon.service" \ + { cp "${ROOT_HOME}/.config/guix/current/lib/systemd/system/guix-daemon.service" \ /etc/systemd/system/; chmod 664 /etc/systemd/system/guix-daemon.service; systemctl daemon-reload && @@ -338,7 +339,7 @@ sys_enable_guix_daemon() ;; NA|*) _msg "${ERR}unsupported init system; run the daemon manually:" - echo " ${ROOT_HOME}/.guix-profile/bin/guix-daemon --build-users-group=guixbuild" + echo " ${ROOT_HOME}/.config/guix/current/bin/guix-daemon --build-users-group=guixbuild" ;; esac @@ -358,9 +359,9 @@ sys_authorize_build_farms() while true; do read -p "Permit downloading pre-built package binaries from the project's build farms? (yes/no) " yn case $yn in - [Yy]*) guix archive --authorize < "${ROOT_HOME}/.guix-profile/share/guix/hydra.gnu.org.pub" && + [Yy]*) guix archive --authorize < "${ROOT_HOME}/.config/guix/current/share/guix/hydra.gnu.org.pub" && _msg "${PAS}Authorized public key for hydra.gnu.org"; - guix archive --authorize < "${ROOT_HOME}/.guix-profile/share/guix/berlin.guixsd.org.pub" && + guix archive --authorize < "${ROOT_HOME}/.config/guix/current/share/guix/berlin.guixsd.org.pub" && _msg "${PAS}Authorized public key for berlin.guixsd.org"; break;; [Nn]*) _msg "${INF}Skipped authorizing build farm public keys" diff --git a/etc/guix-publish.conf.in b/etc/guix-publish.conf.in index 241c594559..7b319f66ae 100644 --- a/etc/guix-publish.conf.in +++ b/etc/guix-publish.conf.in @@ -9,4 +9,4 @@ stop on runlevel [016] task -exec @localstatedir@/guix/profiles/per-user/root/guix-profile/bin/guix publish --user=nobody --port=8181 +exec @localstatedir@/guix/profiles/per-user/root/current-guix/bin/guix publish --user=nobody --port=8181 diff --git a/etc/guix-publish.service.in b/etc/guix-publish.service.in index 8aaf09e3cd..0526f97994 100644 --- a/etc/guix-publish.service.in +++ b/etc/guix-publish.service.in @@ -6,8 +6,8 @@ Description=Publish the GNU Guix store [Service] -ExecStart=@localstatedir@/guix/profiles/per-user/root/guix-profile/bin/guix publish --user=nobody --port=8181 -Environment=GUIX_LOCPATH=/root/.guix-profile/lib/locale +ExecStart=@localstatedir@/guix/profiles/per-user/root/current-guix/bin/guix publish --user=nobody --port=8181 +Environment=GUIX_LOCPATH=@localstatedir@/guix/profiles/per-user/root/guix-profile/lib/locale RemainAfterExit=yes StandardOutput=syslog StandardError=syslog diff --git a/gnu/bootloader/u-boot.scm b/gnu/bootloader/u-boot.scm index b5fab14e14..1c6f322bc4 100644 --- a/gnu/bootloader/u-boot.scm +++ b/gnu/bootloader/u-boot.scm @@ -32,6 +32,7 @@ u-boot-nintendo-nes-classic-edition-bootloader u-boot-novena-bootloader u-boot-pine64-plus-bootloader + u-boot-pinebook-bootloader u-boot-puma-rk3399-bootloader u-boot-wandboard-bootloader)) @@ -168,6 +169,11 @@ (inherit u-boot-allwinner64-bootloader) (package u-boot-pine64-plus))) +(define u-boot-pinebook-bootloader + (bootloader + (inherit u-boot-allwinner64-bootloader) + (package u-boot-pinebook))) + (define u-boot-puma-rk3399-bootloader (bootloader (inherit u-boot-bootloader) diff --git a/gnu/local.mk b/gnu/local.mk index 4a63faa22d..3391c4f522 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -1191,6 +1191,12 @@ dist_patch_DATA = \ %D%/packages/patches/totem-meson-easy-codec.patch \ %D%/packages/patches/tuxpaint-stamps-path.patch \ %D%/packages/patches/twinkle-include-qregexpvalidator.patch \ + %D%/packages/patches/u-boot-pinebook-a64-update-dts.patch \ + %D%/packages/patches/u-boot-pinebook-mmc-calibration.patch \ + %D%/packages/patches/u-boot-pinebook-r_i2c-controller.patch \ + %D%/packages/patches/u-boot-pinebook-dts.patch \ + %D%/packages/patches/u-boot-pinebook-syscon-node.patch \ + %D%/packages/patches/u-boot-pinebook-video-bridge.patch \ %D%/packages/patches/unrtf-CVE-2016-10091.patch \ %D%/packages/patches/unzip-CVE-2014-8139.patch \ %D%/packages/patches/unzip-CVE-2014-8140.patch \ diff --git a/gnu/packages/algebra.scm b/gnu/packages/algebra.scm index eea23bd621..8ee4bc4080 100644 --- a/gnu/packages/algebra.scm +++ b/gnu/packages/algebra.scm @@ -243,7 +243,7 @@ precision.") (define-public giac-xcas (package (name "giac-xcas") - (version "1.4.9-59") + (version "1.5.0-19") (source (origin (method url-fetch) ;; "~parisse/giac" is not used because the maintainer regularly @@ -255,16 +255,48 @@ precision.") "source/giac_" version ".tar.gz")) (sha256 (base32 - "0dv5p5y6gkrsmz3xa7fw87rjyabwdwk09mqb09kb7gai9n9dgayk")))) + "0ds1zh712sr20qh0fih8jnm4nlv90andllp8n263qs7rlhblz551")))) (build-system gnu-build-system) + (outputs '("out" "doc")) ;77MiB of documentation (arguments - `(#:phases + `(#:modules ((ice-9 ftw) + (guix build utils) + (guix build gnu-build-system)) + #:phases (modify-phases %standard-phases (add-after 'unpack 'patch-bin-cp + ;; Some Makefiles contain hard-coded "/bin/cp". (lambda _ - ;; Some Makefiles contain hard-coded "/bin/cp". (substitute* (find-files "doc" "^Makefile") (("/bin/cp") (which "cp"))) + #t)) + (add-after 'unpack 'disable-failing-test + ;; FIXME: Test failing. Not sure why. + (lambda _ + (substitute* "check/Makefile.in" + (("chk_fhan11") "")) + #t)) + (add-after 'install 'install-doc + ;; Setting --docdir to "doc" output isn't sufficient as + ;; documentation and examples are scattered throughout the source. + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (doc (assoc-ref outputs "doc")) + (docdir (string-append doc + "/share/doc/" + (string-append ,name "-" ,version)))) + ;; For some reason, the install process moves + ;; "share/giac/examples" instead of "share/giac/doc" to + ;; "$(docdir)". Clean up the mess and start over. + (delete-file-recursively (string-append doc "/share")) + (mkdir-p docdir) + (with-directory-excursion out + (for-each (lambda (f) + (unless (member f '("." "..")) + (copy-recursively (string-append "share/giac/" f) + (string-append docdir "/" f)))) + (scandir "share/giac")) + (delete-file-recursively "share/giac"))) #t))))) (inputs `(("fltk" ,fltk) diff --git a/gnu/packages/audio.scm b/gnu/packages/audio.scm index 9cee084b19..f9c1b4d434 100644 --- a/gnu/packages/audio.scm +++ b/gnu/packages/audio.scm @@ -2180,7 +2180,7 @@ background file post-processing.") (define-public supercollider (package (name "supercollider") - (version "3.9.2") + (version "3.9.3") (source (origin (method url-fetch) (uri (string-append @@ -2189,7 +2189,7 @@ background file post-processing.") "/SuperCollider-" version "-Source-linux.tar.bz2")) (sha256 (base32 - "0d3cb6dw8jz7ijriqn3rlwin24gffczp69hl17pzxj1d5w57yj44")))) + "1d8ixfl100jvlialxdizp8wqsl1mp5pi2bam25vp97bhjd59cfdr")))) (build-system cmake-build-system) (arguments `(#:configure-flags '("-DSYSTEM_BOOST=on" "-DSYSTEM_YAMLCPP=on" diff --git a/gnu/packages/bittorrent.scm b/gnu/packages/bittorrent.scm index 59fbd6906b..9df5a8e119 100644 --- a/gnu/packages/bittorrent.scm +++ b/gnu/packages/bittorrent.scm @@ -8,6 +8,7 @@ ;;; Copyright © 2016, 2017, 2018 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2017 Jelle Licht <jlicht@fsfe.org> ;;; Copyright © 2018 Fis Trivial <ybbs.daans@hotmail.com> +;;; Copyright © 2018 Nam Nguyen <namn@berkeley.edu> ;;; ;;; This file is part of GNU Guix. ;;; @@ -42,6 +43,7 @@ #:use-module (gnu packages cyrus-sasl) #:use-module (gnu packages databases) #:use-module (gnu packages file) + #:use-module (gnu packages freedesktop) #:use-module (gnu packages glib) #:use-module (gnu packages gnome) #:use-module (gnu packages gnupg) @@ -54,6 +56,7 @@ #:use-module (gnu packages ncurses) #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) + #:use-module (gnu packages python-crypto) #:use-module (gnu packages qt) #:use-module (gnu packages ssh) #:use-module (gnu packages tls) @@ -371,17 +374,17 @@ and will take advantage of multiple processor cores where possible.") (define-public libtorrent-rasterbar (package (name "libtorrent-rasterbar") - (version "1.1.8") + (version "1.1.11") (source (origin (method url-fetch) (uri (string-append - "https://github.com/arvidn/libtorrent/releases/download/libtorrent-" + "https://github.com/arvidn/libtorrent/releases/download/libtorrent_" (string-join (string-split version #\.) "_") "/libtorrent-rasterbar-" version ".tar.gz")) (sha256 (base32 - "0pcdy26l5ivcs78y2bqh2qca83ikzjfchw5815xh69qf8g88zgvb")))) + "0isqidr11fnhybr0wvk0qxd97jaikmh8fx9h89b84yd2gyxdw8vw")))) (build-system gnu-build-system) (arguments `(#:configure-flags @@ -393,7 +396,18 @@ and will take advantage of multiple processor cores where possible.") "CXXFLAGS=-std=c++11") ; Use std::chrono instead of boost #:make-flags (list (string-append "LDFLAGS=-Wl,-rpath=" - (assoc-ref %outputs "out") "/lib")))) + (assoc-ref %outputs "out") "/lib")) + #:phases (modify-phases %standard-phases + (add-after 'unpack 'compile-python-c++11 + (lambda _ + ;; Make sure the Python bindings are compiled in C++ mode to + ;; avoid undefined references as mentioned in + ;; <https://github.com/qbittorrent/qBittorrent/issues/638>. + ;; XXX: This can be removed for 1.2+. + (substitute* "bindings/python/setup.py" + (("\\+ target_specific\\(\\)\\,") + "+ target_specific() + ['-std=c++11'],")) + #t))))) (inputs `(("boost" ,boost) ("openssl" ,openssl))) (native-inputs `(("python" ,python-2) @@ -448,3 +462,40 @@ It aims to be a good alternative to all other BitTorrent clients out there. qBittorrent is fast, stable and provides unicode support as well as many features.") (license l:gpl2+))) + +(define-public deluge + (package + (name "deluge") + (version "1.3.15") + (source + (origin + (method url-fetch) + (uri (string-append + "http://download.deluge-torrent.org/source/deluge-" + version ".tar.xz")) + (sha256 + (base32 + "0b7rri4x0wrcj7rjghrnw1kfrsd5i7i6aq85dsg5dg1w1qa0ar59")))) + (build-system python-build-system) + (inputs + `(("libtorrent" ,libtorrent-rasterbar) + ("python2-chardet" ,python2-chardet) + ("python2-pygtk" ,python2-pygtk) + ("python2-pyopenssl" ,python2-pyopenssl) + ("python2-pyxdg" ,python2-pyxdg) + ("python2-service-identity" ,python2-service-identity) + ("python2-twisted" ,python2-twisted))) + (native-inputs + `(("intltool" ,intltool))) + (arguments + `(#:python ,python-2)) + (home-page "https://www.deluge-torrent.org/") + (synopsis "Fully-featured cross-platform BitTorrent client") + (description + "Deluge contains the common features to BitTorrent clients such as +Protocol Encryption, DHT, Local Peer Discovery (LSD), Peer Exchange +(PEX), UPnP, NAT-PMP, Proxy support, Web seeds, global and per-torrent +speed limits. Deluge heavily utilises the libtorrent library. It is +designed to run as both a normal standalone desktop application and as a +client-server.") + (license l:gpl3+))) diff --git a/gnu/packages/bootloaders.scm b/gnu/packages/bootloaders.scm index da2e82c33d..c155228b4d 100644 --- a/gnu/packages/bootloaders.scm +++ b/gnu/packages/bootloaders.scm @@ -580,6 +580,22 @@ board-independent tools."))) (define-public u-boot-pine64-plus (make-u-boot-sunxi64-package "pine64_plus" "aarch64-linux-gnu")) +(define-public u-boot-pinebook + (let ((base (make-u-boot-sunxi64-package "pinebook" "aarch64-linux-gnu"))) + (package + (inherit base) + (source (origin + (inherit (package-source u-boot)) + (patches (search-patches + ;; Add patches to enable Pinebook support from sunxi + ;; maintainer tree: git://git.denx.de/u-boot-sunxi.git + "u-boot-pinebook-a64-update-dts.patch" + "u-boot-pinebook-syscon-node.patch" + "u-boot-pinebook-mmc-calibration.patch" + "u-boot-pinebook-video-bridge.patch" + "u-boot-pinebook-r_i2c-controller.patch" + "u-boot-pinebook-dts.patch"))))))) + (define-public u-boot-bananapi-m2-ultra (make-u-boot-package "Bananapi_M2_Ultra" "arm-linux-gnueabihf")) diff --git a/gnu/packages/emacs.scm b/gnu/packages/emacs.scm index 67667eeee5..fc036c07ba 100644 --- a/gnu/packages/emacs.scm +++ b/gnu/packages/emacs.scm @@ -811,6 +811,29 @@ different tools. It highlights errors and warnings inline in the buffer, and provides an optional IDE-like error list.") (license license:gpl3+))) ;+GFDLv1.3+ for the manual +(define-public emacs-a + (package + (name "emacs-a") + (version "0.1.1") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/plexus/a.el.git") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "00v9w6qg3bkwdhypq0ssf0phdh0f4bcq59c20lngd6vhk0204dqi")))) + (build-system emacs-build-system) + (home-page "https://github.com/plexus/a.el/") + (synopsis + "Emacs library for dealing with association lists and hash tables") + (description "@code{emacs-a} provides Emacs Lisp functions for dealing +with associative structures in a uniform and functional way. These functions +can take association lists, hash tables, and in some cases vectors (where the +index is considered the key).") + (license license:gpl3+))) + ;;; ;;; Web browsing. @@ -7744,6 +7767,22 @@ activity in channels in the status bar so it stays out of your way unless you want to use it.") (license license:gpl3+))) +(define-public emacs-tracking + (package + (inherit emacs-circe) + (name "emacs-tracking") + (arguments + ;; "tracking.el" is a library extracted from Circe package. It requires + ;; "shorten.el". + `(#:include '("^shorten.el$" "^tracking.el$") + #:tests? #f)) ;tests require buttercup + (home-page "https://github.com/jorgenschaefer/circe/wiki/Tracking") + (synopsis "Buffer tracking library") + (description "@code{tracking.el} provides a way for different modes to +notify the user that a buffer needs attention. The user then can cycle +through them using @key{C-c C-SPC}.") + (license license:gpl3+))) + (define-public emacs-slack (let ((commit "d90395482d26175ce38fd935e978c428be8af9a0") (revision "4")) @@ -11737,8 +11776,8 @@ file.") (license license:gpl3+)))) (define-public emacs-picpocket - (let ((version "20180610.1059") ; taken from melpa - (commit "ce4b6ed088384f2414af82e8e4eae5b92c2874bf")) + (let ((version "40") + (commit "6fd88b8711c4370662c0f9c462170187d092a046")) (package (name "emacs-picpocket") (version version) @@ -11750,7 +11789,7 @@ file.") (commit commit))) (file-name (git-file-name name version)) (sha256 - (base32 "15vpbcv83mc4j1pvrk7xic0klh2bl9gzg2xxs7c2lmnix52hy8mv")))) + (base32 "1mdzzxf7xm7zwrpnqqxa27d1cr31pd72d7ilbwljv13qp177a3yw")))) (build-system emacs-build-system) (arguments ; needed for running tests `(#:tests? #t @@ -12570,3 +12609,55 @@ customized. In addition to C code development @command{gtk-look} is good for classes like @command{<gtk-window>}. @end itemize\n") (license license:gpl3+))) + +(define-public emacs-ov + (package + (name "emacs-ov") + (version "1.0.6") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/ShingoFukuyama/ov.el.git") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "0qxk2rf84j86syxi8xknsq252irwg7sz396v3bb4wqz4prpj0kzc")))) + (build-system emacs-build-system) + (home-page "https://github.com/ShingoFukuyama/ov.el") + (synopsis "Overlay library for Emacs Lisp") + (description "@code{ov.el} provides a simple way to manipulate overlays in +Emacs.") + (license license:gpl3+))) + +(define-public emacs-matrix-client + (let ((commit "3eab4c28280feff18ee1ddd7db66ada4f135cbf8")) + (package + (name "emacs-matrix-client") + (version (git-version "0.0.0" "1" commit)) + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/jgkamat/matrix-client-el.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1k6721jz0m22vpb78881k087mpx8hf3s2219ic75v5mhgx355f7m")))) + (build-system emacs-build-system) + (propagated-inputs + `(("a" ,emacs-a) + ("dash" ,emacs-dash) + ("esxml" ,emacs-esxml) + ("f" ,emacs-f) + ("ht" ,emacs-ht) + ("ov" ,emacs-ov) + ("request" ,emacs-request) + ("s" ,emacs-s) + ("tracking" ,emacs-tracking))) + (home-page "https://github.com/jgkamat/matrix-client-el") + (synopsis "Matrix client for Emacs") + (description "@code{matrix-client} is a simple chat UI to Matrix.org +rooms. It also provides an API which allows Emacs to seamlessly create +RPC channels with users and other software.") + (license license:gpl3+)))) diff --git a/gnu/packages/lisp.scm b/gnu/packages/lisp.scm index d401e5c456..caa90d5a0a 100644 --- a/gnu/packages/lisp.scm +++ b/gnu/packages/lisp.scm @@ -533,8 +533,13 @@ statistical profiler, a code coverage tool, and many other extensions.") (install-file kernel libdir) (install-file heap libdir) - (let ((dirs '("lib" "library" "examples" "contrib" - "tools" "objc-bridge"))) + (let ((dirs '("lib" "library" "examples" "tools" "objc-bridge" + ,@(match (%current-system) + ("x86_64-linux" + '("x86-headers64")) + ("i686-linux" + '("x86-headers")) + (_ '()))))) (for-each copy-recursively dirs (map (cut string-append libdir <>) dirs))) @@ -545,13 +550,12 @@ statistical profiler, a code coverage tool, and many other extensions.") (display (string-append "#!" bash "/bin/sh\n" - "CCL_DEFAULT_DIRECTORY=" libdir "\n" - "export CCL_DEFAULT_DIRECTORY\n" - "exec " libdir kernel "\n")))) + "export CCL_DEFAULT_DIRECTORY=" libdir "\n" + "exec -a \"$0\" " libdir kernel " \"$@\"\n")))) (chmod wrapper #o755)) #t))))) (supported-systems '("i686-linux" "x86_64-linux" "armhf-linux")) - (home-page "http://ccl.clozure.com/") + (home-page "https://ccl.clozure.com/") (synopsis "Common Lisp implementation") (description "Clozure CL (often called CCL for short) is a Common Lisp implementation featuring fast compilation speed, native threads, a precise, diff --git a/gnu/packages/maths.scm b/gnu/packages/maths.scm index ab83c9bc9f..009b82f824 100644 --- a/gnu/packages/maths.scm +++ b/gnu/packages/maths.scm @@ -1655,7 +1655,7 @@ September 2004}") (define-public petsc (package (name "petsc") - (version "3.9.3") + (version "3.10.2") (source (origin (method url-fetch) @@ -1663,7 +1663,7 @@ September 2004}") (uri (string-append "http://ftp.mcs.anl.gov/pub/petsc/release-snapshots/" "petsc-lite-" version ".tar.gz")) (sha256 - (base32 "1fwkbwv4g7zf2lc8fw865xd0bl9anb6jaczfis5dff7h449gwa48")))) + (base32 "0bl64pydak3rblnjffi482r8bin4xim9sb37ksl2jkcxf0i0irsi")))) (outputs '("out" ;libraries and headers "examples")) ;~30MiB of examples (build-system gnu-build-system) @@ -1812,14 +1812,14 @@ scientific applications modeled by partial differential equations.") (define-public python-petsc4py (package (name "python-petsc4py") - (version "3.9.1") + (version "3.10.0") (source (origin (method url-fetch) (uri (pypi-uri "petsc4py" version)) (sha256 (base32 - "1f8zd1ac9irsgkyqmzq30d9kl10fy1nh6zk312dhs43g449fkkhc")))) + "0ch3g6dsvxl7qi984fcssv7cxfbif4bw04gkvxl2l1b8wrmvrm25")))) (build-system python-build-system) (arguments `(#:phases @@ -1871,7 +1871,7 @@ savings are consistently > 5x.") (define-public slepc (package (name "slepc") - (version "3.9.2") + (version "3.10.1") (source (origin (method url-fetch) @@ -1879,7 +1879,7 @@ savings are consistently > 5x.") version ".tar.gz")) (sha256 (base32 - "0gmhdqac8zm3jx43h935z7bflazjnpvqxjv4jh5za2y1z2rqax94")))) + "188j1a133q91h8pivpnzwcf78kz8dvz2nzf6ndnjygdbqb48fizn")))) (build-system gnu-build-system) (native-inputs `(("python" ,python-2))) @@ -1978,14 +1978,14 @@ arising after the discretization of partial differential equations.") (define-public python-slepc4py (package (name "python-slepc4py") - (version "3.9.0") + (version "3.10.0") (source (origin (method url-fetch) (uri (pypi-uri "slepc4py" version)) (sha256 (base32 - "02xr0vndgibgkz3rgprqk05n3mk5mpgqw550sr4681vcsgz4zvb7")))) + "0x049dyc8frgh79fvvavf4vlbqp4mgm61nsaivzdav4316vvlv1j")))) (build-system python-build-system) (arguments `(#:phases diff --git a/gnu/packages/messaging.scm b/gnu/packages/messaging.scm index c22cacfd36..e34f725a40 100644 --- a/gnu/packages/messaging.scm +++ b/gnu/packages/messaging.scm @@ -588,7 +588,7 @@ was initially a fork of xmpppy, but uses non-blocking sockets.") `(#:test-target "test_nogui" #:phases (modify-phases %standard-phases - (add-after 'install 'wrap-program + (add-after 'install 'wrap-gi-typelib-path (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (for-each @@ -616,7 +616,7 @@ was initially a fork of xmpppy, but uses non-blocking sockets.") (symlink adwaita "Adwaita") (copy-recursively hicolor "hicolor"))) #t)) - (add-after 'install-icons 'wrap-program + (add-after 'install-icons 'wrap-gsettings-schema-dir (lambda* (#:key inputs outputs #:allow-other-keys) (wrap-program (string-append (assoc-ref outputs "out") "/bin/gajim") diff --git a/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch b/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch new file mode 100644 index 0000000000..9d0a08c8bf --- /dev/null +++ b/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch @@ -0,0 +1,1485 @@ +From 1b39a1834ed182bbd8036a5cd74a9ea111fa4691 Mon Sep 17 00:00:00 2001 +From: Andre Przywara <andre.przywara@arm.com> +Date: Mon, 29 Oct 2018 00:56:47 +0000 +Subject: [PATCH 03/13] sunxi: A64: Update .dts/.dtsi files +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Update the .dts/.dtsi file from the Linux sunxi/dt64-for-4.20 tree: +commit 679294497be31596e1c9c61507746d72b6b05f26 +Author: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz> +Date: Wed Sep 26 19:48:24 2018 +0000 + arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay + +Signed-off-by: Andre Przywara <andre.przywara@arm.com> +Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> +Reviewed-by: Jagan Teki <jagan@openedev.com> +--- + arch/arm/dts/sun50i-a64-amarula-relic.dts | 168 +++++++++++++- + arch/arm/dts/sun50i-a64-bananapi-m64.dts | 34 ++- + arch/arm/dts/sun50i-a64-nanopi-a64.dts | 89 +++++++- + arch/arm/dts/sun50i-a64-olinuxino.dts | 103 ++++++++- + arch/arm/dts/sun50i-a64-orangepi-win.dts | 179 ++++++++++++++- + arch/arm/dts/sun50i-a64-pine64.dts | 32 ++- + arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 32 ++- + arch/arm/dts/sun50i-a64-sopine.dtsi | 15 ++ + arch/arm/dts/sun50i-a64.dtsi | 313 +++++++++++++++++++++++++-- + 9 files changed, 920 insertions(+), 45 deletions(-) + +diff --git a/arch/arm/dts/sun50i-a64-amarula-relic.dts b/arch/arm/dts/sun50i-a64-amarula-relic.dts +index f3b4e93ece..6cb2b7f0c8 100644 +--- a/arch/arm/dts/sun50i-a64-amarula-relic.dts ++++ b/arch/arm/dts/sun50i-a64-amarula-relic.dts +@@ -22,11 +22,11 @@ + stdout-path = "serial0:115200n8"; + }; + +- reg_vcc3v3: vcc3v3 { +- compatible = "regulator-fixed"; +- regulator-name = "vcc3v3"; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; ++ wifi_pwrseq: wifi-pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ clocks = <&rtc 1>; ++ clock-names = "ext_clock"; ++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */ + }; + }; + +@@ -34,10 +34,34 @@ + status = "okay"; + }; + ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ vmmc-supply = <®_dcdc1>; ++ /* ++ * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but ++ * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with ++ * 0Ohm register to vcc-io-wifi so eldo1 is used. ++ */ ++ vqmmc-supply = <®_eldo1>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&r_pio>; ++ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* WL-WAKE-AP: PL3 */ ++ interrupt-names = "host-wake"; ++ }; ++}; ++ + &mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; +- vmmc-supply = <®_vcc3v3>; ++ vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; +@@ -48,9 +72,138 @@ + status = "okay"; + }; + ++&r_rsb { ++ status = "okay"; ++ ++ axp803: pmic@3a3 { ++ compatible = "x-powers,axp803"; ++ reg = <0x3a3>; ++ interrupt-parent = <&r_intc>; ++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>; ++ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ ++ }; ++}; ++ ++#include "axp803.dtsi" ++ ++®_aldo1 { ++ regulator-always-on; ++ regulator-min-microvolt = <2800000>; ++ regulator-max-microvolt = <2800000>; ++ regulator-name = "avdd-csi"; ++}; ++ ++®_aldo2 { ++ regulator-always-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-pl"; ++}; ++ ++®_aldo3 { ++ regulator-always-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-name = "vcc-pll-avcc"; ++}; ++ ++®_dcdc1 { ++ regulator-always-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-3v3"; ++}; ++ ++®_dcdc2 { ++ regulator-always-on; ++ regulator-min-microvolt = <1040000>; ++ regulator-max-microvolt = <1300000>; ++ regulator-name = "vdd-cpux"; ++}; ++ ++/* DCDC3 is polyphased with DCDC2 */ ++ ++®_dcdc5 { ++ regulator-always-on; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-name = "vcc-dram"; ++}; ++ ++®_dcdc6 { ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-name = "vdd-sys"; ++}; ++ ++®_dldo1 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-hdmi-dsi-sensor"; ++}; ++ ++®_dldo2 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-mipi"; ++}; ++ ++®_dldo3 { ++ regulator-min-microvolt = <2800000>; ++ regulator-max-microvolt = <2800000>; ++ regulator-name = "dovdd-csi"; ++}; ++ ++®_dldo4 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-wifi-io"; ++}; ++ ++®_drivevbus { ++ regulator-name = "usb0-vbus"; ++ status = "okay"; ++}; ++ ++®_eldo1 { ++ regulator-always-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "cpvdd"; ++}; ++ ++®_eldo3 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "dvdd-csi"; ++}; ++ ++®_fldo1 { ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-name = "vcc-1v2-hsic"; ++}; ++ ++/* ++ * The A64 chip cannot work without this regulator off, although ++ * it seems to be only driving the AR100 core. ++ * Maybe we don't still know well about CPUs domain. ++ */ ++®_fldo2 { ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-name = "vdd-cpus"; ++}; ++ ++®_rtc_ldo { ++ regulator-name = "vcc-rtc"; ++}; ++ + &uart0 { + pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins_a>; ++ pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; + }; + +@@ -61,5 +214,6 @@ + + &usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ ++ usb0_vbus-supply = <®_drivevbus>; + status = "okay"; + }; +diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts +index 0716b14411..ef1c90401b 100644 +--- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts ++++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts +@@ -60,6 +60,17 @@ + stdout-path = "serial0:115200n8"; + }; + ++ hdmi-connector { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ + leds { + compatible = "gpio-leds"; + +@@ -86,6 +97,10 @@ + }; + }; + ++&de { ++ status = "okay"; ++}; ++ + &ehci0 { + status = "okay"; + }; +@@ -103,6 +118,17 @@ + status = "okay"; + }; + ++&hdmi { ++ hvcc-supply = <®_dldo1>; ++ status = "okay"; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ + &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +@@ -151,7 +177,7 @@ + + &mmc2 { + pinctrl-names = "default"; +- pinctrl-0 = <&mmc2_pins>; ++ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; +@@ -296,9 +322,13 @@ + regulator-name = "vcc-rtc"; + }; + ++&simplefb_hdmi { ++ vcc-hdmi-supply = <®_dldo1>; ++}; ++ + &uart0 { + pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins_a>; ++ pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; + }; + +diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts +index e2dce48fa2..31884dbc88 100644 +--- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts ++++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts +@@ -51,12 +51,44 @@ + compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64"; + + aliases { ++ ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; ++ ++ hdmi-connector { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ blue { ++ label = "nanopi-a64:blue:status"; ++ gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ ++ }; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ clocks = <&rtc 1>; ++ clock-names = "ext_clock"; ++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ ++ }; ++}; ++ ++&de { ++ status = "okay"; + }; + + &ehci0 { +@@ -67,6 +99,26 @@ + status = "okay"; + }; + ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rgmii_pins>; ++ phy-mode = "rgmii"; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-supply = <®_dcdc1>; ++ status = "okay"; ++}; ++ ++&hdmi { ++ hvcc-supply = <®_dldo1>; ++ status = "okay"; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ + /* i2c1 connected with gpio headers like pine64, bananapi */ + &i2c1 { + pinctrl-names = "default"; +@@ -78,6 +130,13 @@ + bias-pull-up; + }; + ++&mdio { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <7>; ++ }; ++}; ++ + &mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; +@@ -88,6 +147,24 @@ + status = "okay"; + }; + ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ vmmc-supply = <®_dcdc1>; ++ vqmmc-supply = <®_dldo4>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ rtl8189etv: wifi@1 { ++ reg = <1>; ++ interrupt-parent = <&r_pio>; ++ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ ++ interrupt-names = "host-wake"; ++ }; ++}; ++ + &ohci0 { + status = "okay"; + }; +@@ -125,9 +202,9 @@ + + ®_dcdc1 { + regulator-always-on; +- regulator-min-microvolt = <3000000>; +- regulator-max-microvolt = <3000000>; +- regulator-name = "vcc-3v"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-3v3"; + }; + + ®_dcdc2 { +@@ -195,9 +272,13 @@ + regulator-name = "vcc-rtc"; + }; + ++&simplefb_hdmi { ++ vcc-hdmi-supply = <®_dldo1>; ++}; ++ + &uart0 { + pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins_a>; ++ pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; + }; + +diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts +index 3b3081b10e..f7a4bccaa5 100644 +--- a/arch/arm/dts/sun50i-a64-olinuxino.dts ++++ b/arch/arm/dts/sun50i-a64-olinuxino.dts +@@ -51,6 +51,7 @@ + compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64"; + + aliases { ++ ethernet0 = &emac; + serial0 = &uart0; + }; + +@@ -58,12 +59,74 @@ + stdout-path = "serial0:115200n8"; + }; + ++ hdmi-connector { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ compatible = "regulator-fixed"; ++ regulator-name = "usb1-vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */ ++ status = "okay"; ++ }; ++ + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; + }; + ++&de { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rgmii_pins>; ++ phy-mode = "rgmii"; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-supply = <®_dcdc1>; ++ allwinner,tx-delay-ps = <600>; ++ status = "okay"; ++}; ++ ++&hdmi { ++ hvcc-supply = <®_dldo1>; ++ status = "okay"; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ ++&mdio { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ }; ++}; ++ + &mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; +@@ -92,6 +155,14 @@ + }; + }; + ++&ohci0 { ++ status = "okay"; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ + &r_rsb { + status = "okay"; + +@@ -100,6 +171,7 @@ + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; ++ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ + }; + }; + +@@ -142,10 +214,14 @@ + + /* DCDC3 is polyphased with DCDC2 */ + ++/* ++ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal ++ * 1.35V that the PMIC can drive. ++ */ + ®_dcdc5 { + regulator-always-on; +- regulator-min-microvolt = <1500000>; +- regulator-max-microvolt = <1500000>; ++ regulator-min-microvolt = <1360000>; ++ regulator-max-microvolt = <1360000>; + regulator-name = "vcc-ddr3"; + }; + +@@ -180,6 +256,11 @@ + regulator-name = "vcc-wifi-io"; + }; + ++®_drivevbus { ++ regulator-name = "usb0-vbus"; ++ status = "okay"; ++}; ++ + ®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +@@ -214,8 +295,24 @@ + regulator-name = "vcc-rtc"; + }; + ++&simplefb_hdmi { ++ vcc-hdmi-supply = <®_dldo1>; ++}; ++ + &uart0 { + pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins_a>; ++ pinctrl-0 = <&uart0_pb_pins>; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ dr_mode = "otg"; ++ status = "okay"; ++}; ++ ++&usbphy { + status = "okay"; ++ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ ++ usb0_vbus-supply = <®_drivevbus>; ++ usb1_vbus-supply = <®_usb1_vbus>; + }; +diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts +index bf42690a33..b0c64f7579 100644 +--- a/arch/arm/dts/sun50i-a64-orangepi-win.dts ++++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts +@@ -1,5 +1,6 @@ + /* + * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> ++ * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual +@@ -51,23 +52,127 @@ + compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64"; + + aliases { ++ ethernet0 = &emac; + serial0 = &uart0; ++ serial1 = &uart1; ++ serial2 = &uart2; ++ serial3 = &uart3; ++ serial4 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; ++ ++ hdmi-connector { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ status { ++ label = "orangepi:green:status"; ++ gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ ++ }; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */ ++ status = "okay"; ++ }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ compatible = "regulator-fixed"; ++ regulator-name = "usb1-vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */ ++ status = "okay"; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ ++ }; ++}; ++ ++&de { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; + }; + + &ehci1 { + status = "okay"; + }; + ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rgmii_pins>; ++ phy-mode = "rgmii"; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-supply = <®_gmac_3v3>; ++ status = "okay"; ++}; ++ ++&hdmi { ++ hvcc-supply = <®_dldo1>; ++ status = "okay"; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ ++&mdio { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ }; ++}; ++ + &mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; +- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ ++ disable-wp; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ vmmc-supply = <®_dldo2>; ++ vqmmc-supply = <®_dldo4>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&ohci0 { + status = "okay"; + }; + +@@ -89,9 +194,8 @@ + #include "axp803.dtsi" + + ®_aldo1 { +- regulator-always-on; +- regulator-min-microvolt = <1800000>; +- regulator-max-microvolt = <3300000>; ++ regulator-min-microvolt = <2800000>; ++ regulator-max-microvolt = <2800000>; + regulator-name = "afvcc-csi"; + }; + +@@ -163,12 +267,23 @@ + regulator-name = "vcc-wifi-io"; + }; + ++®_drivevbus { ++ regulator-name = "usb0-vbus"; ++ status = "okay"; ++}; ++ + ®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; + }; + ++®_eldo3 { ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "dvdd-csi"; ++}; ++ + ®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; +@@ -191,13 +306,65 @@ + regulator-name = "vcc-rtc"; + }; + ++&simplefb_hdmi { ++ vcc-hdmi-supply = <®_dldo1>; ++}; ++ ++&spi0 { ++ status = "okay"; ++ ++ spi-flash@0 { ++ compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <80000000>; ++ m25p,fast-read; ++ status = "okay"; ++ }; ++}; ++ ++/* On debug connector */ + &uart0 { + pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins_a>; ++ pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; + }; + +-&usbphy { ++/* Bluetooth */ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; ++ status = "okay"; ++}; ++ ++/* On Pi-2 connector, RTS/CTS optional */ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart2_pins>; ++ status = "disabled"; ++}; ++ ++/* On Pi-2 connector, RTS/CTS optional */ ++&uart3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart3_pins>; ++ status = "disabled"; ++}; ++ ++/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */ ++&uart4 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart4_pins>; ++ status = "disabled"; ++}; ++ ++&usb_otg { ++ dr_mode = "otg"; + status = "okay"; + }; + ++&usbphy { ++ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ ++ usb0_vbus-supply = <®_drivevbus>; ++ usb1_vbus-supply = <®_usb1_vbus>; ++ status = "okay"; ++}; +diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts +index a75825798a..c077b6c1f4 100644 +--- a/arch/arm/dts/sun50i-a64-pine64.dts ++++ b/arch/arm/dts/sun50i-a64-pine64.dts +@@ -62,6 +62,21 @@ + chosen { + stdout-path = "serial0:115200n8"; + }; ++ ++ hdmi-connector { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++}; ++ ++&de { ++ status = "okay"; + }; + + &ehci0 { +@@ -82,6 +97,17 @@ + + }; + ++&hdmi { ++ hvcc-supply = <®_dldo1>; ++ status = "okay"; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ + &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +@@ -229,6 +255,10 @@ + regulator-name = "vcc-rtc"; + }; + ++&simplefb_hdmi { ++ vcc-hdmi-supply = <®_dldo1>; ++}; ++ + /* On Euler connector */ + &spdif { + status = "disabled"; +@@ -237,7 +267,7 @@ + /* On Exp and Euler connectors */ + &uart0 { + pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins_a>; ++ pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; + }; + +diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts +index abe179de35..53fcc9098d 100644 +--- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts ++++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts +@@ -61,6 +61,17 @@ + stdout-path = "serial0:115200n8"; + }; + ++ hdmi-connector { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ + reg_vcc1v8: vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; +@@ -69,6 +80,10 @@ + }; + }; + ++&de { ++ status = "okay"; ++}; ++ + &ehci0 { + status = "okay"; + }; +@@ -86,6 +101,17 @@ + status = "okay"; + }; + ++&hdmi { ++ hvcc-supply = <®_dldo1>; ++ status = "okay"; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ + &mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; +@@ -134,9 +160,13 @@ + regulator-name = "vcc-wifi"; + }; + ++&simplefb_hdmi { ++ vcc-hdmi-supply = <®_dldo1>; ++}; ++ + &uart0 { + pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins_a>; ++ pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; + }; + +diff --git a/arch/arm/dts/sun50i-a64-sopine.dtsi b/arch/arm/dts/sun50i-a64-sopine.dtsi +index 43418bd881..6723b8695e 100644 +--- a/arch/arm/dts/sun50i-a64-sopine.dtsi ++++ b/arch/arm/dts/sun50i-a64-sopine.dtsi +@@ -45,6 +45,8 @@ + + #include "sun50i-a64.dtsi" + ++#include <dt-bindings/gpio/gpio.h> ++ + &mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; +@@ -52,6 +54,7 @@ + non-removable; + disable-wp; + bus-width = <4>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; + }; + +@@ -66,6 +69,18 @@ + }; + }; + ++&spi0 { ++ status = "okay"; ++ ++ flash@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <40000000>; ++ }; ++}; ++ + #include "axp803.dtsi" + + ®_aldo2 { +diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi +index 7a083637c4..f3a66f8882 100644 +--- a/arch/arm/dts/sun50i-a64.dtsi ++++ b/arch/arm/dts/sun50i-a64.dtsi +@@ -43,9 +43,12 @@ + */ + + #include <dt-bindings/clock/sun50i-a64-ccu.h> ++#include <dt-bindings/clock/sun8i-de2.h> + #include <dt-bindings/clock/sun8i-r-ccu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/sun50i-a64-ccu.h> ++#include <dt-bindings/reset/sun8i-de2.h> ++#include <dt-bindings/reset/sun8i-r-ccu.h> + + / { + interrupt-parent = <&gic>; +@@ -57,17 +60,21 @@ + #size-cells = <1>; + ranges; + +-/* +- * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU. +- * However there is no support for this clock on A64 yet, so we depend +- * on the upstream clocks here to keep them (and thus CLK_MIXER0) up. +- */ + simplefb_lcd: framebuffer-lcd { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "mixer0-lcd0"; + clocks = <&ccu CLK_TCON0>, +- <&ccu CLK_DE>, <&ccu CLK_BUS_DE>; ++ <&display_clocks CLK_MIXER0>; ++ status = "disabled"; ++ }; ++ ++ simplefb_hdmi: framebuffer-hdmi { ++ compatible = "allwinner,simple-framebuffer", ++ "simple-framebuffer"; ++ allwinner,pipeline = "mixer1-lcd1-hdmi"; ++ clocks = <&display_clocks CLK_MIXER1>, ++ <&ccu CLK_TCON1>, <&ccu CLK_HDMI>; + status = "disabled"; + }; + }; +@@ -81,6 +88,7 @@ + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; ++ next-level-cache = <&L2>; + }; + + cpu1: cpu@1 { +@@ -88,6 +96,7 @@ + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; ++ next-level-cache = <&L2>; + }; + + cpu2: cpu@2 { +@@ -95,6 +104,7 @@ + device_type = "cpu"; + reg = <2>; + enable-method = "psci"; ++ next-level-cache = <&L2>; + }; + + cpu3: cpu@3 { +@@ -102,7 +112,20 @@ + device_type = "cpu"; + reg = <3>; + enable-method = "psci"; ++ next-level-cache = <&L2>; + }; ++ ++ L2: l2-cache { ++ compatible = "cache"; ++ cache-level = <2>; ++ }; ++ }; ++ ++ de: display-engine { ++ compatible = "allwinner,sun50i-a64-display-engine"; ++ allwinner,pipelines = <&mixer0>, ++ <&mixer1>; ++ status = "disabled"; + }; + + osc24M: osc24M_clk { +@@ -168,10 +191,92 @@ + #size-cells = <1>; + ranges; + ++ de2@1000000 { ++ compatible = "allwinner,sun50i-a64-de2"; ++ reg = <0x1000000 0x400000>; ++ allwinner,sram = <&de2_sram 1>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0 0x1000000 0x400000>; ++ ++ display_clocks: clock@0 { ++ compatible = "allwinner,sun50i-a64-de2-clk"; ++ reg = <0x0 0x100000>; ++ clocks = <&ccu CLK_DE>, ++ <&ccu CLK_BUS_DE>; ++ clock-names = "mod", ++ "bus"; ++ resets = <&ccu RST_BUS_DE>; ++ #clock-cells = <1>; ++ #reset-cells = <1>; ++ }; ++ ++ mixer0: mixer@100000 { ++ compatible = "allwinner,sun50i-a64-de2-mixer-0"; ++ reg = <0x100000 0x100000>; ++ clocks = <&display_clocks CLK_BUS_MIXER0>, ++ <&display_clocks CLK_MIXER0>; ++ clock-names = "bus", ++ "mod"; ++ resets = <&display_clocks RST_MIXER0>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mixer0_out: port@1 { ++ reg = <1>; ++ ++ mixer0_out_tcon0: endpoint { ++ remote-endpoint = <&tcon0_in_mixer0>; ++ }; ++ }; ++ }; ++ }; ++ ++ mixer1: mixer@200000 { ++ compatible = "allwinner,sun50i-a64-de2-mixer-1"; ++ reg = <0x200000 0x100000>; ++ clocks = <&display_clocks CLK_BUS_MIXER1>, ++ <&display_clocks CLK_MIXER1>; ++ clock-names = "bus", ++ "mod"; ++ resets = <&display_clocks RST_MIXER1>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mixer1_out: port@1 { ++ reg = <1>; ++ ++ mixer1_out_tcon1: endpoint { ++ remote-endpoint = <&tcon1_in_mixer1>; ++ }; ++ }; ++ }; ++ }; ++ }; ++ + syscon: syscon@1c00000 { +- compatible = "allwinner,sun50i-a64-system-controller", +- "syscon"; ++ compatible = "allwinner,sun50i-a64-system-control"; + reg = <0x01c00000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ sram_c: sram@18000 { ++ compatible = "mmio-sram"; ++ reg = <0x00018000 0x28000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0 0x00018000 0x28000>; ++ ++ de2_sram: sram-section@0 { ++ compatible = "allwinner,sun50i-a64-sram-c"; ++ reg = <0x0000 0x28000>; ++ }; ++ }; + }; + + dma: dma-controller@1c02000 { +@@ -185,6 +290,75 @@ + #dma-cells = <1>; + }; + ++ tcon0: lcd-controller@1c0c000 { ++ compatible = "allwinner,sun50i-a64-tcon-lcd", ++ "allwinner,sun8i-a83t-tcon-lcd"; ++ reg = <0x01c0c000 0x1000>; ++ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; ++ clock-names = "ahb", "tcon-ch0"; ++ clock-output-names = "tcon-pixel-clock"; ++ resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; ++ reset-names = "lcd", "lvds"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ tcon0_in: port@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ ++ tcon0_in_mixer0: endpoint@0 { ++ reg = <0>; ++ remote-endpoint = <&mixer0_out_tcon0>; ++ }; ++ }; ++ ++ tcon0_out: port@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ }; ++ }; ++ }; ++ ++ tcon1: lcd-controller@1c0d000 { ++ compatible = "allwinner,sun50i-a64-tcon-tv", ++ "allwinner,sun8i-a83t-tcon-tv"; ++ reg = <0x01c0d000 0x1000>; ++ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>; ++ clock-names = "ahb", "tcon-ch1"; ++ resets = <&ccu RST_BUS_TCON1>; ++ reset-names = "lcd"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ tcon1_in: port@0 { ++ reg = <0>; ++ ++ tcon1_in_mixer1: endpoint { ++ remote-endpoint = <&mixer1_out_tcon1>; ++ }; ++ }; ++ ++ tcon1_out: port@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ ++ tcon1_out_hdmi: endpoint@1 { ++ reg = <1>; ++ remote-endpoint = <&hdmi_in_tcon1>; ++ }; ++ }; ++ }; ++ }; ++ + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun50i-a64-mmc"; + reg = <0x01c0f000 0x1000>; +@@ -227,6 +401,11 @@ + #size-cells = <0>; + }; + ++ sid: eeprom@1c14000 { ++ compatible = "allwinner,sun50i-a64-sid"; ++ reg = <0x1c14000 0x400>; ++ }; ++ + usb_otg: usb@1c19000 { + compatible = "allwinner,sun8i-a33-musb"; + reg = <0x01c19000 0x0400>; +@@ -356,7 +535,7 @@ + }; + + mmc2_pins: mmc2-pins { +- pins = "PC1", "PC5", "PC6", "PC8", "PC9", ++ pins = "PC5", "PC6", "PC8", "PC9", + "PC10","PC11", "PC12", "PC13", + "PC14", "PC15", "PC16"; + function = "mmc2"; +@@ -364,6 +543,18 @@ + bias-pull-up; + }; + ++ mmc2_ds_pin: mmc2-ds-pin { ++ pins = "PC1"; ++ function = "mmc2"; ++ drive-strength = <30>; ++ bias-pull-up; ++ }; ++ ++ pwm_pin: pwm_pin { ++ pins = "PD22"; ++ function = "pwm"; ++ }; ++ + rmii_pins: rmii_pins { + pins = "PD10", "PD11", "PD13", "PD14", "PD17", + "PD18", "PD19", "PD20", "PD22", "PD23"; +@@ -394,7 +585,7 @@ + function = "spi1"; + }; + +- uart0_pins_a: uart0 { ++ uart0_pb_pins: uart0-pb-pins { + pins = "PB8", "PB9"; + function = "uart0"; + }; +@@ -474,15 +665,6 @@ + status = "disabled"; + }; + +- pwm: pwm@1c21400 { +- compatible = "allwinner,sun50i-a64-pwm", +- "allwinner,sun5i-a13-pwm"; +- reg = <0x01c21400 0x8>; +- clocks = <&osc24M>; +- #pwm-cells = <3>; +- status = "disabled"; +- }; +- + uart0: serial@1c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; +@@ -617,8 +799,6 @@ + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + status = "disabled"; +- #address-cells = <1>; +- #size-cells = <0>; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; +@@ -638,11 +818,69 @@ + #interrupt-cells = <3>; + }; + ++ pwm: pwm@1c21400 { ++ compatible = "allwinner,sun50i-a64-pwm", ++ "allwinner,sun5i-a13-pwm"; ++ reg = <0x01c21400 0x400>; ++ clocks = <&osc24M>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm_pin>; ++ #pwm-cells = <3>; ++ status = "disabled"; ++ }; ++ ++ hdmi: hdmi@1ee0000 { ++ compatible = "allwinner,sun50i-a64-dw-hdmi", ++ "allwinner,sun8i-a83t-dw-hdmi"; ++ reg = <0x01ee0000 0x10000>; ++ reg-io-width = <1>; ++ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, ++ <&ccu CLK_HDMI>; ++ clock-names = "iahb", "isfr", "tmds"; ++ resets = <&ccu RST_BUS_HDMI1>; ++ reset-names = "ctrl"; ++ phys = <&hdmi_phy>; ++ phy-names = "hdmi-phy"; ++ status = "disabled"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ hdmi_in: port@0 { ++ reg = <0>; ++ ++ hdmi_in_tcon1: endpoint { ++ remote-endpoint = <&tcon1_out_hdmi>; ++ }; ++ }; ++ ++ hdmi_out: port@1 { ++ reg = <1>; ++ }; ++ }; ++ }; ++ ++ hdmi_phy: hdmi-phy@1ef0000 { ++ compatible = "allwinner,sun50i-a64-hdmi-phy"; ++ reg = <0x01ef0000 0x10000>; ++ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, ++ <&ccu 7>; ++ clock-names = "bus", "mod", "pll-0"; ++ resets = <&ccu RST_BUS_HDMI0>; ++ reset-names = "phy"; ++ #phy-cells = <0>; ++ }; ++ + rtc: rtc@1f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; ++ clock-output-names = "rtc-osc32k", "rtc-osc32k-out"; ++ clocks = <&osc32k>; ++ #clock-cells = <1>; + }; + + r_intc: interrupt-controller@1f00c00 { +@@ -664,6 +902,29 @@ + #reset-cells = <1>; + }; + ++ r_i2c: i2c@1f02400 { ++ compatible = "allwinner,sun50i-a64-i2c", ++ "allwinner,sun6i-a31-i2c"; ++ reg = <0x01f02400 0x400>; ++ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&r_ccu CLK_APB0_I2C>; ++ resets = <&r_ccu RST_APB0_I2C>; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ r_pwm: pwm@1f03800 { ++ compatible = "allwinner,sun50i-a64-pwm", ++ "allwinner,sun5i-a13-pwm"; ++ reg = <0x01f03800 0x400>; ++ clocks = <&osc24M>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&r_pwm_pin>; ++ #pwm-cells = <3>; ++ status = "disabled"; ++ }; ++ + r_pio: pinctrl@1f02c00 { + compatible = "allwinner,sun50i-a64-r-pinctrl"; + reg = <0x01f02c00 0x400>; +@@ -675,6 +936,16 @@ + interrupt-controller; + #interrupt-cells = <3>; + ++ r_i2c_pl89_pins: r-i2c-pl89-pins { ++ pins = "PL8", "PL9"; ++ function = "s_i2c"; ++ }; ++ ++ r_pwm_pin: pwm { ++ pins = "PL10"; ++ function = "s_pwm"; ++ }; ++ + r_rsb_pins: rsb { + pins = "PL0", "PL1"; + function = "s_rsb"; +-- +2.11.0 + diff --git a/gnu/packages/patches/u-boot-pinebook-dts.patch b/gnu/packages/patches/u-boot-pinebook-dts.patch new file mode 100644 index 0000000000..48c004fdfc --- /dev/null +++ b/gnu/packages/patches/u-boot-pinebook-dts.patch @@ -0,0 +1,388 @@ +From b972831c3cd24f3c9bb0995ed61db8f8239f3391 Mon Sep 17 00:00:00 2001 +From: Vasily Khoruzhick <anarsoul@gmail.com> +Date: Mon, 5 Nov 2018 20:24:31 -0800 +Subject: [PATCH 10/13] sunxi: DT: add support for Pinebook + +Pinebook is a laptop produced by Pine64, with USB-connected keyboard, +USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP +bridge from Analogix. + +Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> +Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> +Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> +Cc: Vagrant Cascadian <vagrant@debian.org> +Reviewed-by: Jagan Teki <jagan@openedev.com> +--- + arch/arm/dts/Makefile | 1 + + arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 ++ + arch/arm/dts/sun50i-a64-pinebook.dts | 294 +++++++++++++++++++++++++++ + configs/pinebook_defconfig | 22 ++ + 4 files changed, 332 insertions(+) + create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi + create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts + create mode 100644 configs/pinebook_defconfig + +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile +index 3093c1185e..eae6b9ee5d 100644 +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -406,6 +406,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \ + sun50i-a64-orangepi-win.dtb \ + sun50i-a64-pine64-plus.dtb \ + sun50i-a64-pine64.dtb \ ++ sun50i-a64-pinebook.dtb \ + sun50i-a64-sopine-baseboard.dtb + dtb-$(CONFIG_MACH_SUN9I) += \ + sun9i-a80-optimus.dtb \ +diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi +new file mode 100644 +index 0000000000..a99b7171d0 +--- /dev/null ++++ b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi +@@ -0,0 +1,15 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com> ++ * ++ */ ++ ++/* The ANX6345 eDP-bridge is on r_i2c */ ++&r_i2c { ++ anx6345: edp-bridge@38 { ++ compatible = "analogix,anx6345"; ++ reg = <0x38>; ++ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ ++ status = "okay"; ++ }; ++}; +diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts +new file mode 100644 +index 0000000000..ec537c5297 +--- /dev/null ++++ b/arch/arm/dts/sun50i-a64-pinebook.dts +@@ -0,0 +1,294 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> ++ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com> ++ * ++ */ ++ ++/dts-v1/; ++ ++#include "sun50i-a64.dtsi" ++ ++#include <dt-bindings/gpio/gpio.h> ++#include <dt-bindings/input/input.h> ++#include <dt-bindings/pwm/pwm.h> ++ ++/ { ++ model = "Pinebook"; ++ compatible = "pine64,pinebook", "allwinner,sun50i-a64"; ++ ++ aliases { ++ serial0 = &uart0; ++ ethernet0 = &rtl8723cs; ++ }; ++ ++ vdd_bl: regulator@0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "bl-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ ++ enable-active-high; ++ }; ++ ++ backlight: backlight { ++ compatible = "pwm-backlight"; ++ pwms = <&pwm 0 50000 0>; ++ brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; ++ default-brightness-level = <2>; ++ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ ++ power-supply = <&vdd_bl>; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ ++ framebuffer-lcd { ++ panel-supply = <®_dc1sw>; ++ dvdd25-supply = <®_dldo2>; ++ dvdd12-supply = <®_fldo1>; ++ }; ++ }; ++ ++ gpio_keys { ++ compatible = "gpio-keys"; ++ ++ lid_switch { ++ label = "Lid Switch"; ++ gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */ ++ linux,input-type = <EV_SW>; ++ linux,code = <SW_LID>; ++ linux,can-disable; ++ wakeup-source; ++ }; ++ }; ++ ++ reg_vcc3v3: vcc3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ ++ }; ++}; ++ ++&ehci0 { ++ phys = <&usbphy 0>; ++ phy-names = "usb"; ++ status = "okay"; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins>; ++ vmmc-supply = <®_dcdc1>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; ++ disable-wp; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ vmmc-supply = <®_dldo4>; ++ vqmmc-supply = <®_eldo1>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ rtl8723cs: wifi@1 { ++ reg = <1>; ++ }; ++}; ++ ++&mmc2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; ++ vmmc-supply = <®_dcdc1>; ++ vqmmc-supply = <®_eldo1>; ++ bus-width = <8>; ++ non-removable; ++ cap-mmc-hw-reset; ++ mmc-hs200-1_8v; ++ status = "okay"; ++}; ++ ++&ohci0 { ++ phys = <&usbphy 0>; ++ phy-names = "usb"; ++ status = "okay"; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&pwm { ++ status = "okay"; ++}; ++ ++&r_rsb { ++ status = "okay"; ++ ++ axp803: pmic@3a3 { ++ compatible = "x-powers,axp803"; ++ reg = <0x3a3>; ++ interrupt-parent = <&r_intc>; ++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>; ++ }; ++}; ++ ++/* The ANX6345 eDP-bridge is on r_i2c */ ++&r_i2c { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&r_i2c_pl89_pins>; ++ status = "okay"; ++}; ++ ++#include "axp803.dtsi" ++ ++®_aldo1 { ++ regulator-min-microvolt = <2800000>; ++ regulator-max-microvolt = <2800000>; ++ regulator-name = "vcc-csi"; ++}; ++ ++®_aldo2 { ++ regulator-always-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-pl"; ++}; ++ ++®_aldo3 { ++ regulator-always-on; ++ regulator-min-microvolt = <2700000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-pll-avcc"; ++}; ++ ++®_dc1sw { ++ regulator-name = "vcc-lcd"; ++}; ++ ++®_dcdc1 { ++ regulator-always-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-3v3"; ++}; ++ ++®_dcdc2 { ++ regulator-always-on; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1300000>; ++ regulator-name = "vdd-cpux"; ++}; ++ ++/* DCDC3 is polyphased with DCDC2 */ ++ ++®_dcdc5 { ++ regulator-always-on; ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-name = "vcc-dram"; ++}; ++ ++®_dcdc6 { ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-name = "vdd-sys"; ++}; ++ ++®_dldo1 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-hdmi"; ++}; ++ ++®_dldo2 { ++ regulator-min-microvolt = <2500000>; ++ regulator-max-microvolt = <2500000>; ++ regulator-name = "vcc-edp"; ++}; ++ ++®_dldo3 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "avdd-csi"; ++}; ++ ++®_dldo4 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-wifi"; ++}; ++ ++®_eldo1 { ++ regulator-always-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "cpvdd"; ++}; ++ ++®_eldo3 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vdd-1v8-csi"; ++}; ++ ++®_fldo1 { ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-name = "vcc-1v2-hsic"; ++}; ++ ++®_fldo2 { ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-name = "vdd-cpus"; ++}; ++ ++®_ldo_io0 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-usb"; ++ status = "okay"; ++}; ++ ++®_rtc_ldo { ++ regulator-name = "vcc-rtc"; ++}; ++ ++&simplefb_hdmi { ++ vcc-hdmi-supply = <®_dldo1>; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pb_pins>; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ dr_mode = "host"; ++}; ++ ++&usbphy { ++ usb0_vbus-supply = <®_ldo_io0>; ++ usb1_vbus-supply = <®_ldo_io0>; ++ status = "okay"; ++}; +diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig +new file mode 100644 +index 0000000000..5294dbd2eb +--- /dev/null ++++ b/configs/pinebook_defconfig +@@ -0,0 +1,22 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_SPL=y ++CONFIG_MACH_SUN50I=y ++CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y ++CONFIG_DRAM_CLK=552 ++CONFIG_DRAM_ZQ=3881949 ++CONFIG_MMC_SUNXI_SLOT_EXTRA=2 ++CONFIG_R_I2C_ENABLE=y ++# CONFIG_CMD_FLASH is not set ++# CONFIG_SPL_DOS_PARTITION is not set ++# CONFIG_SPL_EFI_PARTITION is not set ++CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook" ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_SUNXI=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y ++# CONFIG_USB_GADGET is not set ++CONFIG_VIDEO_BRIDGE=y ++CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y +-- +2.11.0 + diff --git a/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch b/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch new file mode 100644 index 0000000000..118bdf8e0c --- /dev/null +++ b/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch @@ -0,0 +1,98 @@ +From 20940ef2a397446a209350900d3bd618c3fd5b94 Mon Sep 17 00:00:00 2001 +From: Vasily Khoruzhick <anarsoul@gmail.com> +Date: Mon, 5 Nov 2018 20:24:28 -0800 +Subject: [PATCH 07/13] mmc: sunxi: add support for automatic delay calibration + +A64 and H6 support automatic delay calibration and Linux driver uses it +instead of hardcoded delays. Add support for it to u-boot driver. + +Fixes eMMC instability on Pinebook + +Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> +Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> +Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> +Reviewed-by: Andre Przywara <andre.przywara@arm.com> +Cc: Vagrant Cascadian <vagrant@debian.org> +Reviewed-by: Jagan Teki <jagan@openedev.com> +--- + arch/arm/include/asm/arch-sunxi/mmc.h | 6 +++++- + drivers/mmc/sunxi_mmc.c | 21 ++++++++++++++++++++- + 2 files changed, 25 insertions(+), 2 deletions(-) + +diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h +index d98c53faaa..f2deafddd2 100644 +--- a/arch/arm/include/asm/arch-sunxi/mmc.h ++++ b/arch/arm/include/asm/arch-sunxi/mmc.h +@@ -46,7 +46,9 @@ struct sunxi_mmc { + u32 cbda; /* 0x94 */ + u32 res2[26]; + #if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6) +- u32 res3[64]; ++ u32 res3[17]; ++ u32 samp_dl; ++ u32 res4[46]; + #endif + u32 fifo; /* 0x100 / 0x200 FIFO access address */ + }; +@@ -130,5 +132,7 @@ struct sunxi_mmc { + #define SUNXI_MMC_COMMON_CLK_GATE (1 << 16) + #define SUNXI_MMC_COMMON_RESET (1 << 18) + ++#define SUNXI_MMC_CAL_DL_SW_EN (0x1 << 7) ++ + struct mmc *sunxi_mmc_init(int sdc_no); + #endif /* _SUNXI_MMC_H */ +diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c +index 39f15eb423..147eb9b4d5 100644 +--- a/drivers/mmc/sunxi_mmc.c ++++ b/drivers/mmc/sunxi_mmc.c +@@ -99,11 +99,16 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz) + { + unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly; + bool new_mode = false; ++ bool calibrate = false; + u32 val = 0; + + if (IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE) && (priv->mmc_no == 2)) + new_mode = true; + ++#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6) ++ calibrate = true; ++#endif ++ + /* + * The MMC clock has an extra /2 post-divider when operating in the new + * mode. +@@ -174,7 +179,11 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz) + val = CCM_MMC_CTRL_MODE_SEL_NEW; + setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW); + #endif +- } else { ++ } else if (!calibrate) { ++ /* ++ * Use hardcoded delay values if controller doesn't support ++ * calibration ++ */ + val = CCM_MMC_CTRL_OCLK_DLY(oclk_dly) | + CCM_MMC_CTRL_SCLK_DLY(sclk_dly); + } +@@ -228,6 +237,16 @@ static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc) + rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK; + writel(rval, &priv->reg->clkcr); + ++#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6) ++ /* A64 supports calibration of delays on MMC controller and we ++ * have to set delay of zero before starting calibration. ++ * Allwinner BSP driver sets a delay only in the case of ++ * using HS400 which is not supported by mainline U-Boot or ++ * Linux at the moment ++ */ ++ writel(SUNXI_MMC_CAL_DL_SW_EN, &priv->reg->samp_dl); ++#endif ++ + /* Re-enable Clock */ + rval |= SUNXI_MMC_CLK_ENABLE; + writel(rval, &priv->reg->clkcr); +-- +2.11.0 + diff --git a/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch b/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch new file mode 100644 index 0000000000..824a16b9db --- /dev/null +++ b/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch @@ -0,0 +1,70 @@ +From 31a4ac4d79d75baeede3edfa95515fd4169ef502 Mon Sep 17 00:00:00 2001 +From: Vasily Khoruzhick <anarsoul@gmail.com> +Date: Mon, 5 Nov 2018 20:24:30 -0800 +Subject: [PATCH 09/13] sun50i: A64: add support for R_I2C controller + +Allwinner A64 has a I2C controller, which is in the R_ MMIO zone and has +two groups of pinmuxes on PL bank, so it's called R_I2C. + +Add support for this I2C controller and the pinmux which doesn't conflict +with RSB. + +Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> +Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> +Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> +Cc: Vagrant Cascadian <vagrant@debian.org> +Acked-by: Jagan Teki <jagan@openedev.com> +--- + arch/arm/include/asm/arch-sunxi/gpio.h | 1 + + arch/arm/mach-sunxi/Kconfig | 1 + + board/sunxi/board.c | 6 ++++++ + 3 files changed, 8 insertions(+) + +diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h +index 6a5eafc3d3..2daf23f6f5 100644 +--- a/arch/arm/include/asm/arch-sunxi/gpio.h ++++ b/arch/arm/include/asm/arch-sunxi/gpio.h +@@ -211,6 +211,7 @@ enum sunxi_gpio_number { + #define SUN8I_H3_GPL_R_TWI 2 + #define SUN8I_A23_GPL_R_TWI 3 + #define SUN8I_GPL_R_UART 2 ++#define SUN50I_GPL_R_TWI 2 + + #define SUN9I_GPN_R_RSB 3 + +diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig +index 6277abc3cc..560dc9b25d 100644 +--- a/arch/arm/mach-sunxi/Kconfig ++++ b/arch/arm/mach-sunxi/Kconfig +@@ -278,6 +278,7 @@ config MACH_SUN50I + select ARM64 + select DM_I2C + select PHY_SUN4I_USB ++ select SUN6I_PRCM + select SUNXI_DE2 + select SUNXI_GEN_SUN6I + select SUPPORT_SPL +diff --git a/board/sunxi/board.c b/board/sunxi/board.c +index b196d48674..64ccbc7245 100644 +--- a/board/sunxi/board.c ++++ b/board/sunxi/board.c +@@ -168,10 +168,16 @@ void i2c_init_board(void) + #endif + + #ifdef CONFIG_R_I2C_ENABLE ++#ifdef CONFIG_MACH_SUN50I ++ clock_twi_onoff(5, 1); ++ sunxi_gpio_set_cfgpin(SUNXI_GPL(8), SUN50I_GPL_R_TWI); ++ sunxi_gpio_set_cfgpin(SUNXI_GPL(9), SUN50I_GPL_R_TWI); ++#else + clock_twi_onoff(5, 1); + sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI); + sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI); + #endif ++#endif + } + + #if defined(CONFIG_ENV_IS_IN_MMC) && defined(CONFIG_ENV_IS_IN_FAT) +-- +2.11.0 + diff --git a/gnu/packages/patches/u-boot-pinebook-syscon-node.patch b/gnu/packages/patches/u-boot-pinebook-syscon-node.patch new file mode 100644 index 0000000000..9289645bec --- /dev/null +++ b/gnu/packages/patches/u-boot-pinebook-syscon-node.patch @@ -0,0 +1,38 @@ +From ababb5920e8992c9bb7956df3cc85dc68d27dfe8 Mon Sep 17 00:00:00 2001 +From: Andre Przywara <andre.przywara@arm.com> +Date: Mon, 29 Oct 2018 00:56:48 +0000 +Subject: [PATCH 04/13] sunxi: A64: Re-add syscon to DT node + +The sun50i-a64.dtsi changes introduced in Linux v4.19-rc1 changed the +compatible name for the syscon controller, dropping the generic "syscon" +fallback. Using this new DT node will make the Ethernet driver in every +older kernel (or non-Linux kernels) fail to initialise the MAC device. + +To allow booting distribution kernels (from installer images via UEFI, +for instance), re-add the syscon compatible string as a fallback. This +works with both older and newer kernels. + +Signed-off-by: Andre Przywara <andre.przywara@arm.com> +Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> +Reviewed-by: Jagan Teki <jagan@openedev.com> +--- + arch/arm/dts/sun50i-a64.dtsi | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi +index f3a66f8882..ff41abc96a 100644 +--- a/arch/arm/dts/sun50i-a64.dtsi ++++ b/arch/arm/dts/sun50i-a64.dtsi +@@ -259,7 +259,8 @@ + }; + + syscon: syscon@1c00000 { +- compatible = "allwinner,sun50i-a64-system-control"; ++ compatible = "allwinner,sun50i-a64-system-control", ++ "syscon"; + reg = <0x01c00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; +-- +2.11.0 + diff --git a/gnu/packages/patches/u-boot-pinebook-video-bridge.patch b/gnu/packages/patches/u-boot-pinebook-video-bridge.patch new file mode 100644 index 0000000000..8c6ca8a992 --- /dev/null +++ b/gnu/packages/patches/u-boot-pinebook-video-bridge.patch @@ -0,0 +1,50 @@ +From 8336a43792a103c13d939b3925cb75322911f7fb Mon Sep 17 00:00:00 2001 +From: Vasily Khoruzhick <anarsoul@gmail.com> +Date: Mon, 5 Nov 2018 20:24:29 -0800 +Subject: [PATCH 08/13] dm: video: bridge: don't fail to activate bridge if + reset or sleep GPIO is missing + +Both GPIOs are optional, so we shouldn't fail if any is missing. +Without this fix reset is not deasserted if sleep GPIO is missing. + +Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> +Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> +Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> +Reviewed-by: Andre Przywara <andre.przywara@arm.com> +Cc: Vagrant Cascadian <vagrant@debian.org> +--- + drivers/video/bridge/video-bridge-uclass.c | 16 +++++++++++----- + 1 file changed, 11 insertions(+), 5 deletions(-) + +diff --git a/drivers/video/bridge/video-bridge-uclass.c b/drivers/video/bridge/video-bridge-uclass.c +index cd4959cc71..5fecb4cfd5 100644 +--- a/drivers/video/bridge/video-bridge-uclass.c ++++ b/drivers/video/bridge/video-bridge-uclass.c +@@ -106,13 +106,19 @@ static int video_bridge_pre_probe(struct udevice *dev) + int video_bridge_set_active(struct udevice *dev, bool active) + { + struct video_bridge_priv *uc_priv = dev_get_uclass_priv(dev); +- int ret; ++ int ret = 0; + + debug("%s: %d\n", __func__, active); +- ret = dm_gpio_set_value(&uc_priv->sleep, !active); +- if (ret) +- return ret; +- if (active) { ++ if (uc_priv->sleep.dev) { ++ ret = dm_gpio_set_value(&uc_priv->sleep, !active); ++ if (ret) ++ return ret; ++ } ++ ++ if (!active) ++ return 0; ++ ++ if (uc_priv->reset.dev) { + ret = dm_gpio_set_value(&uc_priv->reset, true); + if (ret) + return ret; +-- +2.11.0 + diff --git a/gnu/packages/photo.scm b/gnu/packages/photo.scm index 713342658b..aa9c93622f 100644 --- a/gnu/packages/photo.scm +++ b/gnu/packages/photo.scm @@ -69,14 +69,14 @@ (define-public libraw (package (name "libraw") - (version "0.19.0") + (version "0.19.1") (source (origin (method url-fetch) (uri (string-append "https://www.libraw.org/data/LibRaw-" version ".tar.gz")) (sha256 (base32 - "0nfj7s7qmgfy1cl8s3ck7dxjvprfq5glfi6iidmvmy8r7gl52gz8")))) + "1xjyw4n9gfr2r637pjbpbi3h98h9mdjn61b0hsxwqynq2vdij452")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) diff --git a/gnu/packages/python-crypto.scm b/gnu/packages/python-crypto.scm index a38bd00089..1c7640ac5f 100644 --- a/gnu/packages/python-crypto.scm +++ b/gnu/packages/python-crypto.scm @@ -18,6 +18,7 @@ ;;; Copyright © 2018 Tomáš Čech <sleep_walker@gnu.org> ;;; Copyright © 2018 Nicolas Goaziou <mail@nicolasgoaziou.fr> ;;; Copyright © 2018 Vagrant Cascadian <vagrant@debian.org> +;;; Copyright © 2018 Nam Nguyen <namn@berkeley.edu> ;;; ;;; This file is part of GNU Guix. ;;; @@ -970,3 +971,33 @@ been constructed to maintain extensive documentation on how to use (description "This is a set of Python bindings for the scrypt key derivation function.") (license license:bsd-2))) + +(define-public python-service-identity + (package + (name "python-service-identity") + (version "17.0.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "service_identity" version)) + (sha256 + (base32 + "1aq24cn3nnsjr9g797dayhx4g653h6bd41ksqhidzq0rvarzn0a0")))) + (build-system python-build-system) + (propagated-inputs + `(("python-attrs" ,python-attrs) + ("python-pyasn1" ,python-pyasn1) + ("python-pyasn1-modules" ,python-pyasn1-modules) + ("python-pyopenssl" ,python-pyopenssl))) + (home-page "https://service-identity.readthedocs.io/") + (synopsis "Service identity verification for PyOpenSSL") + (description + "@code{service_identity} aspires to give you all the tools you need +for verifying whether a certificate is valid for the intended purposes. +In the simplest case, this means host name verification. However, +service_identity implements RFC 6125 fully and plans to add other +relevant RFCs too.") + (license license:expat))) + +(define-public python2-service-identity + (package-with-python2 python-service-identity)) diff --git a/gnu/packages/python.scm b/gnu/packages/python.scm index 01b1d352c6..c68aa31173 100644 --- a/gnu/packages/python.scm +++ b/gnu/packages/python.scm @@ -14610,14 +14610,14 @@ run on top of the dynamic task schedulers. ") (define-public python-ilinkedlist (package (name "python-ilinkedlist") - (version "0.3.1") + (version "0.4.0") (source (origin (method url-fetch) (uri (pypi-uri "ilinkedlist" version)) (sha256 (base32 - "04wpv7km8jggrngc4bjg3nm615czd3bjdvpsy2icg6c1c8162zyg")))) + "0nrw4sr3afldrp7073hvc0rgdz282s0l819jdmj1i6nn05v33h0l")))) (build-system python-build-system) (native-inputs `(("python-pytest" ,python-pytest))) (inputs `(("python" ,python))) diff --git a/gnu/packages/xorg.scm b/gnu/packages/xorg.scm index 774001af6c..9aa65291b9 100644 --- a/gnu/packages/xorg.scm +++ b/gnu/packages/xorg.scm @@ -5962,7 +5962,7 @@ basic eye-candy effects.") (define-public xpra (package (name "xpra") - (version "2.4.1") + (version "2.4.2") (source (origin (method url-fetch) @@ -5970,7 +5970,7 @@ basic eye-candy effects.") version ".tar.xz")) (sha256 (base32 - "1bhk6vydsrhlngvrv5w55arqf69cr3yw84xscnnl7km2g1iswkrs")))) + "01x4ri0arfq9cn01bh80h232lsj95jp6j1zw0z0q7a6mwrw4gr6i")))) (build-system python-build-system) (inputs `(("ffmpeg" ,ffmpeg) ("flac" ,flac) diff --git a/gnu/system/install.scm b/gnu/system/install.scm index a648ddf95e..45b3a0c839 100644 --- a/gnu/system/install.scm +++ b/gnu/system/install.scm @@ -53,6 +53,7 @@ nintendo-nes-classic-edition-installation-os novena-installation-os pine64-plus-installation-os + pinebook-installation-os rk3399-puma-installation-os wandboard-installation-os os-with-u-boot)) @@ -473,6 +474,11 @@ The bootloader BOOTLOADER is installed to BOOTLOADER-TARGET." "/dev/mmcblk0" ; SD card storage "ttyS0")) +(define pinebook-installation-os + (embedded-installation-os u-boot-pinebook-bootloader + "/dev/mmcblk0" ; SD card storage + "ttyS0")) + (define rk3399-puma-installation-os (embedded-installation-os u-boot-puma-rk3399-bootloader "/dev/mmcblk0" ; SD card storage diff --git a/guix/scripts/describe.scm b/guix/scripts/describe.scm index d817d7f7ca..98be4ee89f 100644 --- a/guix/scripts/describe.scm +++ b/guix/scripts/describe.scm @@ -1,5 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2018 Ludovic Courtès <ludo@gnu.org> +;;; Copyright © 2018 Oleg Pykhalov <go.wigust@gmail.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -18,11 +19,13 @@ (define-module (guix scripts describe) #:use-module ((guix ui) #:hide (display-profile-content)) + #:use-module (guix channels) #:use-module (guix scripts) #:use-module (guix describe) #:use-module (guix profiles) #:use-module ((guix scripts pull) #:select (display-profile-content)) #:use-module (git) + #:use-module (json) #:use-module (srfi srfi-1) #:use-module (srfi srfi-37) #:use-module (ice-9 match) @@ -38,7 +41,7 @@ ;; Specifications of the command-line options. (list (option '(#\f "format") #t #f (lambda (opt name arg result) - (unless (member arg '("human" "channels")) + (unless (member arg '("human" "channels" "json" "recutils")) (leave (G_ "~a: unsupported output format~%") arg)) (alist-cons 'format (string->symbol arg) result))) (option '(#\p "profile") #t #f @@ -84,6 +87,22 @@ Display information about the channels currently in use.\n")) (format #t (G_ "~%;; warning: GUIX_PACKAGE_PATH=\"~a\"~%") string)))))) +(define (channel->sexp channel) + `(channel + (name ,(channel-name channel)) + (url ,(channel-url channel)) + (commit ,(channel-commit channel)))) + +(define (channel->json channel) + (scm->json-string `((name . ,(channel-name channel)) + (url . ,(channel-url channel)) + (commit . ,(channel-commit channel))))) + +(define (channel->recutils channel port) + (format port "name: ~a~%" (channel-name channel)) + (format port "url: ~a~%" (channel-url channel)) + (format port "commit: ~a~%" (channel-commit channel))) + (define* (display-checkout-info fmt #:optional directory) "Display information about the current checkout according to FMT, a symbol denoting the requested format. Exit if the current directory does not lie @@ -104,10 +123,19 @@ within a Git checkout." (format #t (G_ " branch: ~a~%") (reference-shorthand head)) (format #t (G_ " commit: ~a~%") commit)) ('channels - (pretty-print `(list (channel - (name 'guix) - (url ,(dirname directory)) - (commit ,commit)))))) + (pretty-print `(list ,(channel->sexp (channel (name 'guix) + (url (dirname directory)) + (commit commit)))))) + ('json + (display (channel->json (channel (name 'guix) + (url (dirname directory)) + (commit commit)))) + (newline)) + ('recutils + (channel->recutils (channel (name 'guix) + (url (dirname directory)) + (commit commit)) + (current-output-port)))) (display-package-search-path fmt))) (define (display-profile-info profile fmt) @@ -116,34 +144,46 @@ in the format specified by FMT." (define number (generation-number profile)) + (define channels + (map (lambda (entry) + (match (assq 'source (manifest-entry-properties entry)) + (('source ('repository ('version 0) + ('url url) + ('branch branch) + ('commit commit) + _ ...)) + (channel (name (string->symbol (manifest-entry-name entry))) + (url url) + (commit commit))) + + ;; Pre-0.15.0 Guix does not provide that information, + ;; so there's not much we can do in that case. + (_ (channel (name 'guix) + (url "?") + (commit "?"))))) + + ;; Show most recently installed packages last. + (reverse + (manifest-entries + (profile-manifest + (if (zero? number) + profile + (generation-file-name profile number))))))) + (match fmt ('human (display-profile-content profile number)) ('channels - (pretty-print - `(list ,@(map (lambda (entry) - (match (assq 'source (manifest-entry-properties entry)) - (('source ('repository ('version 0) - ('url url) - ('branch branch) - ('commit commit) - _ ...)) - `(channel (name ',(string->symbol - (manifest-entry-name entry))) - (url ,url) - (commit ,commit))) - - ;; Pre-0.15.0 Guix does not provide that information, - ;; so there's not much we can do in that case. - (_ '???))) - - ;; Show most recently installed packages last. - (reverse - (manifest-entries - (profile-manifest - (if (zero? number) - profile - (generation-file-name profile number)))))))))) + (pretty-print `(list ,@(map channel->sexp channels)))) + ('json + (format #t "[~a]~%" (string-join (map channel->json channels) ","))) + ('recutils + (format #t "~{~a~%~}" + (map (lambda (channel) + (with-output-to-string + (lambda () + (channel->recutils channel (current-output-port))))) + channels)))) (display-package-search-path fmt)) diff --git a/guix/scripts/pack.scm b/guix/scripts/pack.scm index a86b95dd38..ce46f549cc 100644 --- a/guix/scripts/pack.scm +++ b/guix/scripts/pack.scm @@ -149,6 +149,7 @@ dependencies are registered." (define* (self-contained-tarball name profile #:key target + (profile-name "guix-profile") deduplicate? (compressor (first %compressors)) localstatedir? @@ -221,6 +222,7 @@ added to the pack." ;; <http://lists.gnu.org/archive/html/bug-tar/2017-11/msg00009.html>. (populate-single-profile-directory %root #:profile #$profile + #:profile-name #$profile-name #:closure "profile" #:database #+database) @@ -279,6 +281,7 @@ added to the pack." (define* (squashfs-image name profile #:key target + (profile-name "guix-profile") (compressor (first %compressors)) localstatedir? (symlinks '()) @@ -377,6 +380,7 @@ added to the pack." (define* (docker-image name profile #:key target + (profile-name "guix-profile") (compressor (first %compressors)) localstatedir? (symlinks '()) @@ -587,6 +591,7 @@ please email '~a'~%") (define %default-options ;; Alist of default option values. `((format . tarball) + (profile-name . "guix-profile") (system . ,(%current-system)) (substitutes? . #t) (build-hook? . #t) @@ -658,6 +663,13 @@ please email '~a'~%") (option '("localstatedir") #f #f (lambda (opt name arg result) (alist-cons 'localstatedir? #t result))) + (option '("profile-name") #t #f + (lambda (opt name arg result) + (match arg + ((or "guix-profile" "current-guix") + (alist-cons 'profile-name arg result)) + (_ + (leave (G_ "~a: unsupported profile name~%") arg))))) (option '("bootstrap") #f #f (lambda (opt name arg result) (alist-cons 'bootstrap? #t result))) @@ -691,6 +703,9 @@ Create a bundle of PACKAGE.\n")) (display (G_ " --localstatedir include /var/guix in the resulting pack")) (display (G_ " + --profile-name=NAME + populate /var/guix/profiles/.../NAME")) + (display (G_ " --bootstrap use the bootstrap binaries to build the pack")) (newline) (display (G_ " @@ -779,7 +794,8 @@ Create a bundle of PACKAGE.\n")) (#f (leave (G_ "~a: unknown pack format~%") pack-format)))) - (localstatedir? (assoc-ref opts 'localstatedir?))) + (localstatedir? (assoc-ref opts 'localstatedir?)) + (profile-name (assoc-ref opts 'profile-name))) (run-with-store store (mlet* %store-monad ((profile (profile-derivation manifest @@ -798,6 +814,8 @@ Create a bundle of PACKAGE.\n")) symlinks #:localstatedir? localstatedir? + #:profile-name + profile-name #:archiver archiver))) (mbegin %store-monad diff --git a/guix/status.scm b/guix/status.scm index ffa9d9e93c..2ceb56788a 100644 --- a/guix/status.scm +++ b/guix/status.scm @@ -393,6 +393,9 @@ addition to build events." expected hash: ~a actual hash: ~a~%")) expected actual)) + (('build-remote drv host _ ...) + (format port (info (G_ "offloading build of ~a to '~a'")) drv host) + (newline port)) (('build-log pid line) (if (multiplexed-output-supported?) (if (not pid) diff --git a/guix/store/database.scm b/guix/store/database.scm index 38796910da..e6bfbe763e 100644 --- a/guix/store/database.scm +++ b/guix/store/database.scm @@ -53,7 +53,7 @@ (define sqlite-exec ;; XXX: This is was missing from guile-sqlite3 until - ;; <https://notabug.org/civodul/guile-sqlite3/commit/b87302f9bcd18a286fed57b2ea521845eb1131d7>. + ;; <https://notabug.org/guile-sqlite3/guile-sqlite3/commit/b87302f9bcd18a286fed57b2ea521845eb1131d7>. (let ((exec (pointer->procedure int (dynamic-func "sqlite3_exec" (@@ (sqlite3) libsqlite3)) diff --git a/m4/guix.m4 b/m4/guix.m4 index da3c65f8f7..5c846f7618 100644 --- a/m4/guix.m4 +++ b/m4/guix.m4 @@ -162,7 +162,7 @@ dnl Check whether a recent-enough Guile-Sqlite3 is available. AC_DEFUN([GUIX_CHECK_GUILE_SQLITE3], [ dnl Check whether 'sqlite-bind-arguments' is available. It was introduced dnl in February 2018: - dnl <https://notabug.org/civodul/guile-sqlite3/commit/1cd1dec96a9999db48c0ff45bab907efc637247f>. + dnl <https://notabug.org/guile-sqlite3/guile-sqlite3/commit/1cd1dec96a9999db48c0ff45bab907efc637247f>. AC_CACHE_CHECK([whether Guile-Sqlite3 is available and recent enough], [guix_cv_have_recent_guile_sqlite3], [GUILE_CHECK([retval], diff --git a/tests/guix-pack-localstatedir.sh b/tests/guix-pack-localstatedir.sh new file mode 100644 index 0000000000..b734b0f7e3 --- /dev/null +++ b/tests/guix-pack-localstatedir.sh @@ -0,0 +1,69 @@ +# GNU Guix --- Functional package management for GNU +# Copyright © 2018 Ludovic Courtès <ludo@gnu.org> +# +# This file is part of GNU Guix. +# +# GNU Guix is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or (at +# your option) any later version. +# +# GNU Guix is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +# +# Test the 'guix pack --localstatedir' command-line utility. +# + +guix pack --version + +# 'guix pack --localstatedir' produces derivations that depend on +# guile-sqlite3 and guile-gcrypt. To make that relatively inexpensive, run +# the test in the user's global store if possible, on the grounds that +# binaries may already be there or can be built or downloaded inexpensively. + +NIX_STORE_DIR="`guile -c '(use-modules (guix config))(display %storedir)'`" +localstatedir="`guile -c '(use-modules (guix config))(display %localstatedir)'`" +GUIX_DAEMON_SOCKET="$localstatedir/guix/daemon-socket/socket" +export NIX_STORE_DIR GUIX_DAEMON_SOCKET + +if ! guile -c '(use-modules (guix)) (exit (false-if-exception (open-connection)))' +then + exit 77 +fi + +# Build a tarball with '--localstatedir' +the_pack="`guix pack -C none --localstatedir --profile-name=current-guix \ + guile-bootstrap`" +test_directory="`mktemp -d`" +trap 'chmod -Rf +w "$test_directory"; rm -rf "$test_directory"' EXIT + +cd "$test_directory" +tar -xf "$the_pack" + +profile="`find -name current-guix`" +test "`readlink $profile`" = "current-guix-1-link" +test -s "`dirname $profile`/../../../db/db.sqlite" +test -x ".`guix build guile-bootstrap`/bin/guile" +cd - + +# Make sure the store database is not completely bogus. +guile -c "(use-modules (sqlite3) (guix config) (ice-9 match)) + + (define db + (sqlite-open (string-append \"$test_directory\" + %localstatedir + \"/guix/db/db.sqlite\") + SQLITE_OPEN_READONLY)) + + (define stmt + (sqlite-prepare db \"SELECT * FROM ValidPaths;\")) + + (match (sqlite-fold cons '() stmt) + ((#(ids paths hashes times derivers sizes) ...) + (exit (member \"`guix build guile-bootstrap`\" paths))))" |