diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/guix.texi | 188 |
1 files changed, 184 insertions, 4 deletions
diff --git a/doc/guix.texi b/doc/guix.texi index 8b97920f21..a537433bf6 100644 --- a/doc/guix.texi +++ b/doc/guix.texi @@ -443,8 +443,15 @@ Run the daemon, and set it to automatically start on boot. If your host distro uses the systemd init system, this can be achieved with these commands: +@c Versions of systemd that supported symlinked service files are not +@c yet widely deployed, so we should suggest that users copy the service +@c files into place. +@c +@c See this thread for more information: +@c http://lists.gnu.org/archive/html/guix-devel/2017-01/msg01199.html + @example -# ln -s ~root/.guix-profile/lib/systemd/system/guix-daemon.service \ +# cp ~root/.guix-profile/lib/systemd/system/guix-daemon.service \ /etc/systemd/system/ # systemctl start guix-daemon && systemctl enable guix-daemon @end example @@ -452,8 +459,8 @@ with these commands: If your host distro uses the Upstart init system: @example -# ln -s ~root/.guix-profile/lib/upstart/system/guix-daemon.conf /etc/init/ # initctl reload-configuration +# cp ~root/.guix-profile/lib/upstart/system/guix-daemon.conf /etc/init/ # start guix-daemon @end example @@ -8396,7 +8403,7 @@ other things. @deftp {Data Type} mingetty-configuration This is the data type representing the configuration of Mingetty, which -implements console log-in. +provides the default implementation of virtual console log-in. @table @asis @@ -8423,6 +8430,172 @@ The Mingetty package to use. @end table @end deftp +@deffn {Scheme Procedure} agetty-service @var{config} +Return a service to run agetty according to @var{config}, an +@code{<agetty-configuration>} object, which specifies the tty to run, +among other things. +@end deffn + +@deftp {Data Type} agetty-configuration +This is the data type representing the configuration of agetty, which +implements virtual and serial console log-in. See the @code{agetty(8)} +man page for more information. + +@table @asis + +@item @code{tty} +The name of the console this agetty runs on, as a string---e.g., +@code{"ttyS0"}. This argument is mandatory. + +@item @code{baud-rate} (default: @code{#f}) +A string containing a comma-separated list of one or more baud rates, in +descending order. + +@item @code{term} (default: @code{#f}) +A string containing the value used for the @code{TERM} environment +variable. + +@item @code{eight-bits?} (default: @code{#f}) +When @code{#t}, the tty is assumed to be 8-bit clean, and parity detection is +disabled. + +@item @code{auto-login} (default: @code{#f}) +When passed a login name, as a string, the specified user will be logged +in automatically without prompting for their login name or password. + +@item @code{no-reset?} (default: @code{#f}) +When @code{#t}, don't reset terminal cflags (control modes). + +@item @code{host} (default: @code{#f}) +This accepts a string containing the "login_host", which will be written +into the @file{/var/run/utmpx} file. + +@item @code{remote?} (default: @code{#f}) +When set to @code{#t} in conjunction with @var{host}, this will add an +@code{-r} fakehost option to the command line of the login program +specified in @var{login-program}. + +@item @code{flow-control?} (default: @code{#f}) +When set to @code{#t}, enable hardware (RTS/CTS) flow control. + +@item @code{no-issue?} (default: @code{#f}) +When set to @code{#t}, the contents of the @file{/etc/issue} file will +not be displayed before presenting the login prompt. + +@item @code{init-string} (default: @code{#f}) +This accepts a string that will be sent to the tty or modem before +sending anything else. It can be used to initialize a modem. + +@item @code{no-clear?} (default: @code{#f}) +When set to @code{#t}, agetty will not clear the screen before showing +the login prompt. + +@item @code{login-program} (default: (file-append shadow "/bin/login")) +This must be either a gexp denoting the name of a log-in program, or +unset, in which case the default value is the @command{login} from the +Shadow tool suite. + +@item @code{local-line} (default: @code{#f}) +Control the CLOCAL line flag. This accepts one of three symbols as +arguments, @code{'auto}, @code{'always}, or @code{'never}. If @code{#f}, +the default value chosen by agetty is @code{'auto}. + +@item @code{extract-baud?} (default: @code{#f}) +When set to @code{#t}, instruct agetty to try to extract the baud rate +from the status messages produced by certain types of modems. + +@item @code{skip-login?} (default: @code{#f}) +When set to @code{#t}, do not prompt the user for a login name. This +can be used with @var{login-program} field to use non-standard login +systems. + +@item @code{no-newline?} (default: @code{#f}) +When set to @code{#t}, do not print a newline before printing the +@file{/etc/issue} file. + +@c Is this dangerous only when used with login-program, or always? +@item @code{login-options} (default: @code{#f}) +This option accepts a string containing options that are passed to the +login program. When used with the @var{login-program}, be aware that a +malicious user could try to enter a login name containing embedded +options that could be parsed by the login program. + +@item @code{login-pause} (default: @code{#f}) +When set to @code{#t}, wait for any key before showing the login prompt. +This can be used in conjunction with @var{auto-login} to save memory by +lazily spawning shells. + +@item @code{chroot} (default: @code{#f}) +Change root to the specified directory. This option accepts a directory +path as a string. + +@item @code{hangup?} (default: @code{#f}) +Use the Linux system call @code{vhangup} to do a virtual hangup of the +specified terminal. + +@item @code{keep-baud?} (default: @code{#f}) +When set to @code{#t}, try to keep the existing baud rate. The baud +rates from @var{baud-rate} are used when agetty receives a @key{BREAK} +character. + +@item @code{timeout} (default: @code{#f}) +When set to an integer value, terminate if no user name could be read +within @var{timeout} seconds. + +@item @code{detect-case?} (default: @code{#f}) +When set to @code{#t}, turn on support for detecting an uppercase-only +terminal. This setting will detect a login name containing only +uppercase letters as indicating an uppercase-only terminal and turn on +some upper-to-lower case conversions. Note that this will not support +Unicode characters. + +@item @code{wait-cr?} (default: @code{#f}) +When set to @code{#t}, wait for the user or modem to send a +carriage-return or linefeed character before displaying +@file{/etc/issue} or login prompt. This is typically used with the +@var{init-string} option. + +@item @code{no-hints?} (default: @code{#f}) +When set to @code{#t}, do not print hints about Num, Caps, and Scroll +locks. + +@item @code{no-hostname?} (default: @code{#f}) +By default, the hostname is printed. When this option is set to +@code{#t}, no hostname will be shown at all. + +@item @code{long-hostname?} (default: @code{#f}) +By default, the hostname is only printed until the first dot. When this +option is set to @code{#t}, the fully qualified hostname by +@code{gethostname} or @code{getaddrinfo} is shown. + +@item @code{erase-characters} (default: @code{#f}) +This option accepts a string of additional characters that should be +interpreted as backspace when the user types their login name. + +@item @code{kill-characters} (default: @code{#f}) +This option accepts a string that should be interpreted to mean "ignore +all previous characters" (also called a "kill" character) when the types +their login name. + +@item @code{chdir} (default: @code{#f}) +This option accepts, as a string, a directory path that will be changed +to before login. + +@item @code{delay} (default: @code{#f}) +This options accepts, as an integer, the number of seconds to sleep +before opening the tty and displaying the login prompt. + +@item @code{nice} (default: @code{#f}) +This option accepts, as an integer, the nice value with which to run the +@command{login} program. + +@item @code{extra-options} (default: @code{'()}) +This option provides an "escape hatch" for the user to provide arbitrary +command-line arguments to @command{agetty} as a list of strings. + +@end table +@end deftp + @deffn {Scheme Procedure} kmscon-service-type @var{config} Return a service to run @uref{https://www.freedesktop.org/wiki/Software/kmscon,kmscon} according to @var{config}, a @code{<kmscon-configuration>} object, which @@ -8431,7 +8604,7 @@ specifies the tty to run, among other things. @deftp {Data Type} kmscon-configuration This is the data type representing the configuration of Kmscon, which -implements console log-in. +implements virtual console log-in. @table @asis @@ -8616,6 +8789,13 @@ are written. @item @code{lsof} (default: @var{lsof}) The lsof package to use. +@item @code{http-proxy} (default: @code{#f}) +The HTTP proxy used for downloading fixed-output derivations and +substitutes. + +@item @code{tmpdir} (default: @code{#f}) +A directory path where the @command{guix-daemon} will perform builds. + @end table @end deftp |