summary refs log tree commit diff
path: root/gnu/packages/patches/u-boot-pinebook-dts.patch
diff options
context:
space:
mode:
Diffstat (limited to 'gnu/packages/patches/u-boot-pinebook-dts.patch')
-rw-r--r--gnu/packages/patches/u-boot-pinebook-dts.patch388
1 files changed, 388 insertions, 0 deletions
diff --git a/gnu/packages/patches/u-boot-pinebook-dts.patch b/gnu/packages/patches/u-boot-pinebook-dts.patch
new file mode 100644
index 0000000000..48c004fdfc
--- /dev/null
+++ b/gnu/packages/patches/u-boot-pinebook-dts.patch
@@ -0,0 +1,388 @@
+From b972831c3cd24f3c9bb0995ed61db8f8239f3391 Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Mon, 5 Nov 2018 20:24:31 -0800
+Subject: [PATCH 10/13] sunxi: DT: add support for Pinebook
+
+Pinebook is a laptop produced by Pine64, with USB-connected keyboard,
+USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP
+bridge from Analogix.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Cc: Vagrant Cascadian <vagrant@debian.org>
+Reviewed-by: Jagan Teki <jagan@openedev.com>
+---
+ arch/arm/dts/Makefile                        |   1 +
+ arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi |  15 ++
+ arch/arm/dts/sun50i-a64-pinebook.dts         | 294 +++++++++++++++++++++++++++
+ configs/pinebook_defconfig                   |  22 ++
+ 4 files changed, 332 insertions(+)
+ create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
+ create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
+ create mode 100644 configs/pinebook_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 3093c1185e..eae6b9ee5d 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -406,6 +406,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
+ 	sun50i-a64-orangepi-win.dtb \
+ 	sun50i-a64-pine64-plus.dtb \
+ 	sun50i-a64-pine64.dtb \
++	sun50i-a64-pinebook.dtb \
+ 	sun50i-a64-sopine-baseboard.dtb
+ dtb-$(CONFIG_MACH_SUN9I) += \
+ 	sun9i-a80-optimus.dtb \
+diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
+new file mode 100644
+index 0000000000..a99b7171d0
+--- /dev/null
++++ b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
+@@ -0,0 +1,15 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
++ *
++ */
++
++/* The ANX6345 eDP-bridge is on r_i2c */
++&r_i2c {
++	anx6345: edp-bridge@38 {
++		compatible = "analogix,anx6345";
++		reg = <0x38>;
++		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
++		status = "okay";
++	};
++};
+diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts
+new file mode 100644
+index 0000000000..ec537c5297
+--- /dev/null
++++ b/arch/arm/dts/sun50i-a64-pinebook.dts
+@@ -0,0 +1,294 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
++ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
++ *
++ */
++
++/dts-v1/;
++
++#include "sun50i-a64.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/pwm/pwm.h>
++
++/ {
++	model = "Pinebook";
++	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
++
++	aliases {
++		serial0 = &uart0;
++		ethernet0 = &rtl8723cs;
++	};
++
++	vdd_bl: regulator@0 {
++		compatible = "regulator-fixed";
++		regulator-name = "bl-3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
++		enable-active-high;
++	};
++
++	backlight: backlight {
++		compatible = "pwm-backlight";
++		pwms = <&pwm 0 50000 0>;
++		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
++		default-brightness-level = <2>;
++		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
++		power-supply = <&vdd_bl>;
++	};
++
++	chosen {
++		stdout-path = "serial0:115200n8";
++
++		framebuffer-lcd {
++			panel-supply = <&reg_dc1sw>;
++			dvdd25-supply = <&reg_dldo2>;
++			dvdd12-supply = <&reg_fldo1>;
++		};
++	};
++
++	gpio_keys {
++		compatible = "gpio-keys";
++
++		lid_switch {
++			label = "Lid Switch";
++			gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
++			linux,input-type = <EV_SW>;
++			linux,code = <SW_LID>;
++			linux,can-disable;
++			wakeup-source;
++		};
++	};
++
++	reg_vcc3v3: vcc3v3 {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++	};
++
++	wifi_pwrseq: wifi_pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
++	};
++};
++
++&ehci0 {
++	phys = <&usbphy 0>;
++	phy-names = "usb";
++	status = "okay";
++};
++
++&ehci1 {
++	status = "okay";
++};
++
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins>;
++	vmmc-supply = <&reg_dcdc1>;
++	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
++	disable-wp;
++	bus-width = <4>;
++	status = "okay";
++};
++
++&mmc1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc1_pins>;
++	vmmc-supply = <&reg_dldo4>;
++	vqmmc-supply = <&reg_eldo1>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	status = "okay";
++
++	rtl8723cs: wifi@1 {
++		reg = <1>;
++	};
++};
++
++&mmc2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
++	vmmc-supply = <&reg_dcdc1>;
++	vqmmc-supply = <&reg_eldo1>;
++	bus-width = <8>;
++	non-removable;
++	cap-mmc-hw-reset;
++	mmc-hs200-1_8v;
++	status = "okay";
++};
++
++&ohci0 {
++	phys = <&usbphy 0>;
++	phy-names = "usb";
++	status = "okay";
++};
++
++&ohci1 {
++	status = "okay";
++};
++
++&pwm {
++	status = "okay";
++};
++
++&r_rsb {
++	status = "okay";
++
++	axp803: pmic@3a3 {
++		compatible = "x-powers,axp803";
++		reg = <0x3a3>;
++		interrupt-parent = <&r_intc>;
++		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++	};
++};
++
++/* The ANX6345 eDP-bridge is on r_i2c */
++&r_i2c {
++	clock-frequency = <100000>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&r_i2c_pl89_pins>;
++	status = "okay";
++};
++
++#include "axp803.dtsi"
++
++&reg_aldo1 {
++	regulator-min-microvolt = <2800000>;
++	regulator-max-microvolt = <2800000>;
++	regulator-name = "vcc-csi";
++};
++
++&reg_aldo2 {
++	regulator-always-on;
++	regulator-min-microvolt = <1800000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-pl";
++};
++
++&reg_aldo3 {
++	regulator-always-on;
++	regulator-min-microvolt = <2700000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-pll-avcc";
++};
++
++&reg_dc1sw {
++	regulator-name = "vcc-lcd";
++};
++
++&reg_dcdc1 {
++	regulator-always-on;
++	regulator-min-microvolt = <3300000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-3v3";
++};
++
++&reg_dcdc2 {
++	regulator-always-on;
++	regulator-min-microvolt = <1000000>;
++	regulator-max-microvolt = <1300000>;
++	regulator-name = "vdd-cpux";
++};
++
++/* DCDC3 is polyphased with DCDC2 */
++
++&reg_dcdc5 {
++	regulator-always-on;
++	regulator-min-microvolt = <1200000>;
++	regulator-max-microvolt = <1200000>;
++	regulator-name = "vcc-dram";
++};
++
++&reg_dcdc6 {
++	regulator-always-on;
++	regulator-min-microvolt = <1100000>;
++	regulator-max-microvolt = <1100000>;
++	regulator-name = "vdd-sys";
++};
++
++&reg_dldo1 {
++	regulator-min-microvolt = <3300000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-hdmi";
++};
++
++&reg_dldo2 {
++	regulator-min-microvolt = <2500000>;
++	regulator-max-microvolt = <2500000>;
++	regulator-name = "vcc-edp";
++};
++
++&reg_dldo3 {
++	regulator-min-microvolt = <3300000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "avdd-csi";
++};
++
++&reg_dldo4 {
++	regulator-min-microvolt = <3300000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-wifi";
++};
++
++&reg_eldo1 {
++	regulator-always-on;
++	regulator-min-microvolt = <1800000>;
++	regulator-max-microvolt = <1800000>;
++	regulator-name = "cpvdd";
++};
++
++&reg_eldo3 {
++	regulator-min-microvolt = <1800000>;
++	regulator-max-microvolt = <1800000>;
++	regulator-name = "vdd-1v8-csi";
++};
++
++&reg_fldo1 {
++	regulator-min-microvolt = <1200000>;
++	regulator-max-microvolt = <1200000>;
++	regulator-name = "vcc-1v2-hsic";
++};
++
++&reg_fldo2 {
++	regulator-always-on;
++	regulator-min-microvolt = <1100000>;
++	regulator-max-microvolt = <1100000>;
++	regulator-name = "vdd-cpus";
++};
++
++&reg_ldo_io0 {
++	regulator-min-microvolt = <3300000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-usb";
++	status = "okay";
++};
++
++&reg_rtc_ldo {
++	regulator-name = "vcc-rtc";
++};
++
++&simplefb_hdmi {
++	vcc-hdmi-supply = <&reg_dldo1>;
++};
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_pb_pins>;
++	status = "okay";
++};
++
++&usb_otg {
++	dr_mode = "host";
++};
++
++&usbphy {
++	usb0_vbus-supply = <&reg_ldo_io0>;
++	usb1_vbus-supply = <&reg_ldo_io0>;
++	status = "okay";
++};
+diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig
+new file mode 100644
+index 0000000000..5294dbd2eb
+--- /dev/null
++++ b/configs/pinebook_defconfig
+@@ -0,0 +1,22 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_MACH_SUN50I=y
++CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
++CONFIG_DRAM_CLK=552
++CONFIG_DRAM_ZQ=3881949
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++CONFIG_R_I2C_ENABLE=y
++# CONFIG_CMD_FLASH is not set
++# CONFIG_SPL_DOS_PARTITION is not set
++# CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_SUNXI=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
++# CONFIG_USB_GADGET is not set
++CONFIG_VIDEO_BRIDGE=y
++CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
+-- 
+2.11.0
+
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-25 11:28:01 +0000