diff options
Diffstat (limited to 'gnu/packages')
36 files changed, 2021 insertions, 433 deletions
diff --git a/gnu/packages/admin.scm b/gnu/packages/admin.scm index 4a88fdd76a..c2599746d8 100644 --- a/gnu/packages/admin.scm +++ b/gnu/packages/admin.scm @@ -46,8 +46,12 @@ #:use-module (gnu packages flex) #:use-module (gnu packages glib) #:use-module (gnu packages pkg-config) + #:use-module (gnu packages popt) #:use-module (gnu packages texinfo) #:use-module (gnu packages groff) + #:use-module (gnu packages pciutils) + #:use-module (gnu packages libusb) + #:use-module (gnu packages libftdi) #:use-module (gnu packages xorg)) (define-public dmd @@ -803,3 +807,136 @@ reliability depending on the manufacturer. This will often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI, ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel, USB).") (license gpl2+))) + +(define-public flashrom + (package + (name "flashrom") + (version "0.9.7") + (source (origin + (method url-fetch) + (uri (string-append + "http://download.flashrom.org/releases/flashrom-" + version ".tar.bz2")) + (sha256 + (base32 + "1s9pc4yls2s1gcg2ar4q75nym2z5v6lxq36bl6lq26br00nj2mas")) + (patches (list (search-patch "flashrom-use-libftdi1.patch"))))) + (build-system gnu-build-system) + (inputs `(("dmidecode" ,dmidecode) + ("pciutils" ,pciutils) + ("libusb" ,libusb) + ("libftdi" ,libftdi))) + (native-inputs `(("pkg-config" ,pkg-config))) + (arguments + '(#:make-flags (list "CC=gcc" (string-append "PREFIX=" %output)) + #:tests? #f ; no 'check' target + #:phases + (alist-delete + 'configure + (alist-cons-before + 'build 'patch-exec-paths + (lambda* (#:key inputs #:allow-other-keys) + (substitute* "dmi.c" + (("\"dmidecode\"") + (format #f "~S" + (string-append (assoc-ref inputs "dmidecode") + "/sbin/dmidecode"))))) + %standard-phases)))) + (home-page "http://flashrom.org/") + (synopsis "Identify, read, write, erase, and verify ROM/flash chips") + (description + "flashrom is a utility for identifying, reading, writing, +verifying and erasing flash chips. It is designed to flash +BIOS/EFI/coreboot/firmware/optionROM images on mainboards, +network/graphics/storage controller cards, and various other +programmer devices.") + (license gpl2))) + +(define-public acpica + (package + (name "acpica") + (version "20140724") + (source (origin + (method url-fetch) + (uri (string-append + "https://acpica.org/sites/acpica/files/acpica-unix2-" + version ".tar.gz")) + (sha256 + (base32 + "01vdgrh7dsxrrvg5yd8sxm63cw8210pnsi5qg9g15ac53gn243ac")))) + (build-system gnu-build-system) + (native-inputs `(("flex" ,flex) + ("bison" ,bison))) + (arguments + '(#:make-flags (list (string-append "PREFIX=" %output) + "HOST=_LINUX" + "OPT_CFLAGS=-Wall -fno-strict-aliasing") + #:tests? #f ; no 'check' target. + #:phases (alist-delete 'configure %standard-phases))) + (home-page "http://acpica.org/") + (synopsis "ACPICA tools for the development and debug of ACPI tables") + (description + "The ACPI Component Architecture (ACPICA) project provides an +OS-independent reference implementation of the Advanced Configuration and +Power Interface Specification (ACPI). ACPICA code contains those portions of +ACPI meant to be directly integrated into the host OS as a kernel-resident +subsystem, and a small set of tools to assist in developing and debugging ACPI +tables. This package contains only the user-space tools needed for ACPI table +development, not the kernel implementation of ACPI.") + (license gpl2))) ; Dual GPLv2/ACPICA Licence + +(define-public stress + (package + (name "stress") + (version "1.0.1") + (source (origin + (method url-fetch) + (uri (string-append "mirror://debian/pool/main/s/stress/stress_" + version ".orig.tar.gz")) + (sha256 + (base32 + "1v9vnzlihqfjsxa93hdbrq72pqqk00dkylmlg8jpxhm7s1w9qfl1")))) + (build-system gnu-build-system) + (home-page "http://packages.debian.org/wheezy/stress") + (synopsis "A tool to impose load on and stress test a computer system") + (description + "'stress' is a tool that imposes a configurable amount of CPU, memory, I/O, +or disk stress on a POSIX-compliant operating system and reports any errors it +detects. + +'stress' is not a benchmark. It is a tool used by system administrators to +evaluate how well their systems will scale, by kernel programmers to evaluate +perceived performance characteristics, and by systems programmers to expose +the classes of bugs which only or more frequently manifest themselves when the +system is under heavy load.") + (license gpl2+))) + +(define-public detox + (package + (name "detox") + (version "1.2.0") + (source (origin + (method url-fetch) + (uri (string-append "mirror://sourceforge/detox/detox-" + version ".tar.bz2")) + (sha256 + (base32 + "1y6vvjqsg54kl49cry73jbfhr04s7wjs779vrr9zrq6kww7dkymb")))) + (build-system gnu-build-system) + ;; Both flex and popt are used in this case for their runtime libraries + ;; (libfl and libpopt). + (inputs + `(("flex" ,flex) + ("popt" ,popt))) + (arguments + `(#:configure-flags `(,(string-append "--with-popt=" + (assoc-ref %build-inputs "popt"))) + #:tests? #f)) ;no 'check' target + (home-page "http://detox.sourceforge.net") + (synopsis "Clean up filenames") + (description + "Detox is a program that renames files to make them easier to work with +under Unix and related operating systems. Spaces and various other unsafe +characters (such as \"$\") get replaced with \"_\". ISO 8859-1 (Latin-1) +characters can be replaced as well, as can UTF-8 characters.") + (license bsd-3))) diff --git a/gnu/packages/apl.scm b/gnu/packages/apl.scm index c7bb656cec..a08886c252 100644 --- a/gnu/packages/apl.scm +++ b/gnu/packages/apl.scm @@ -1,5 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2013 Nikita Karetnikov <nikita@karetnikov.org> +;;; Copyright © 2014 Mark H Weaver <mhw@netris.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -23,25 +24,31 @@ #:use-module (guix build-system gnu) #:use-module (gnu packages gettext) #:use-module (gnu packages maths) + #:use-module (gnu packages sqlite) #:use-module (gnu packages readline)) (define-public apl (package (name "apl") - (version "1.3") + (version "1.4") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/apl/apl-" version ".tar.gz")) (sha256 (base32 - "1pkwlm0nf5vb8sp9hf9wjmsrsyr4vdpd4kv5y3hzmsgf3wcf8y3i")))) + "0fl9l4jb5wpnb54kqkphavi657z1cv15h9qj2rqy2shf33dk3nk9")))) (build-system gnu-build-system) (home-page "http://www.gnu.org/software/apl/") (inputs `(("gettext" ,gnu-gettext) ("lapack" ,lapack) + ("sqlite" ,sqlite) ("readline" ,readline))) + (arguments + `(#:configure-flags (list (string-append + "--with-sqlite3=" + (assoc-ref %build-inputs "sqlite"))))) (synopsis "APL interpreter") (description "GNU APL is a free interpreter for the programming language APL. It is diff --git a/gnu/packages/apr.scm b/gnu/packages/apr.scm index 26b49a5756..de068ee996 100644 --- a/gnu/packages/apr.scm +++ b/gnu/packages/apr.scm @@ -1,5 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2013 Cyril Roelandt <tipecaml@gmail.com> +;;; Copyright © 2014 Mark H Weaver <mhw@netris.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -28,14 +29,14 @@ (define-public apr (package (name "apr") - (version "1.4.8") + (version "1.5.1") (source (origin (method url-fetch) (uri (string-append "mirror://apache/apr/apr-" version ".tar.bz2")) (sha256 (base32 - "0884csfk3f530yscak0jlr6w929s3ys0n7fpwdg3dii1sgwd5f31")) + "1b4qw686bwjn19iyb0lg918q23xxd6s2gnyczhjq992d3m1vwjp9")) (patches (list (search-patch "apr-skip-getservbyname-test.patch"))) (patch-flags '("-p0")))) @@ -44,7 +45,8 @@ ;; Sometimes we end up with two processes concurrently trying to make ;; 'libmod_test.la': <http://hydra.gnu.org/build/60266/nixlog/2/raw>. ;; Thus, build sequentially. - '(#:parallel-build? #f)) + '(#:parallel-build? #f + #:parallel-tests? #f)) (inputs `(("perl" ,perl) ("libtool" ,libtool))) (home-page "http://apr.apache.org/") @@ -62,14 +64,14 @@ around or take advantage of platform-specific deficiencies or features.") (define-public apr-util (package (name "apr-util") - (version "1.5.2") + (version "1.5.3") (source (origin (method url-fetch) (uri (string-append "mirror://apache/apr/apr-util-" version ".tar.bz2")) (sha256 (base32 - "19qjxpckb9p4j9pbk8kcirg6k5vqnjrqhnk9xx2c5m9964p3vkls")))) + "0s1rpqjy5xr03k9s4xrsm5wvhj5286vlkf6jvqayw99yy5sb3vbq")))) (build-system gnu-build-system) (inputs `(("apr" ,apr))) diff --git a/gnu/packages/avrdude.scm b/gnu/packages/avrdude.scm new file mode 100644 index 0000000000..28456045e0 --- /dev/null +++ b/gnu/packages/avrdude.scm @@ -0,0 +1,58 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2014 Manolis Fragkiskos Ragkousis <manolis837@gmail.com> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu packages avrdude) + #:use-module (guix licenses) + #:use-module (guix download) + #:use-module (guix packages) + #:use-module (gnu packages) + #:use-module (guix build-system gnu) + #:use-module (gnu packages bison) + #:use-module (gnu packages flex) + #:use-module (gnu packages elf) + #:use-module (gnu packages libusb) + #:use-module (gnu packages libftdi)) + +(define-public avrdude + (package + (name "avrdude") + (version "6.1") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://savannah/avrdude/avrdude-" + version ".tar.gz")) + (sha256 + (base32 + "0frxg0q09nrm95z7ymzddx7ysl77ilfbdix1m81d9jjpiv5bm64y")) + (patches (list (search-patch "avrdude-fix-libusb.patch"))))) + (build-system gnu-build-system) + (inputs + `(("libelf" ,libelf) + ("libusb" ,libusb) + ("libftdi" ,libftdi))) + (native-inputs + `(("bison" ,bison) + ("flex" ,flex))) + (home-page "http://www.nongnu.org/avrdude/") + (synopsis "AVR downloader and uploader") + (description + "AVRDUDE is a utility to download/upload/manipulate the ROM and +EEPROM contents of AVR microcontrollers using the in-system programming +technique (ISP).") + (license gpl2+))) diff --git a/gnu/packages/bittorrent.scm b/gnu/packages/bittorrent.scm index e21b7fbee2..496120a06d 100644 --- a/gnu/packages/bittorrent.scm +++ b/gnu/packages/bittorrent.scm @@ -36,7 +36,7 @@ (define-public transmission (package (name "transmission") - (version "2.83") + (version "2.84") (source (origin (method url-fetch) (uri (string-append @@ -44,7 +44,7 @@ version ".tar.xz")) (sha256 (base32 - "0cqlgl6jmjw1caybz6nzh3l8z0jak1dxba01isv72zvy2r8b1qdh")))) + "1sxr1magqb5s26yvr5yhs1f7bmir8gl09niafg64lhgfnhv1kz59")))) (build-system gnu-build-system) (outputs '("out" ; library and command-line interface "gui")) ; graphical user interface diff --git a/gnu/packages/cryptsetup.scm b/gnu/packages/cryptsetup.scm index c362a63b8b..781147cc35 100644 --- a/gnu/packages/cryptsetup.scm +++ b/gnu/packages/cryptsetup.scm @@ -24,7 +24,6 @@ #:use-module (guix build-system gnu) #:use-module (gnu packages) #:use-module (gnu packages gnupg) - #:use-module (gnu packages lvm) #:use-module (gnu packages popt) #:use-module (gnu packages python) #:use-module (gnu packages linux)) diff --git a/gnu/packages/curl.scm b/gnu/packages/curl.scm index 7309da61e6..727c57d611 100644 --- a/gnu/packages/curl.scm +++ b/gnu/packages/curl.scm @@ -1,5 +1,5 @@ ;;; GNU Guix --- Functional package management for GNU -;;; Copyright © 2013 Andreas Enge <andreas@enge.fr> +;;; Copyright © 2013, 2014 Andreas Enge <andreas@enge.fr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -37,18 +37,14 @@ (define-public curl (package (name "curl") - (version "7.35.0") + (version "7.37.1") (source (origin (method url-fetch) (uri (string-append "http://curl.haxx.se/download/curl-" version ".tar.lzma")) (sha256 (base32 - "14w5cwh6b1426lxkq6kp6h4vxryr4n7wfrrwhny1r4123q7n8ab9")) - (patches - ;; This patch fixes testcase 172 which uses a hardcoded cookie - ;; expiration value which is expired as of Feb 1, 2014. - (list (search-patch "curl-fix-test172.patch"))))) + "10yfh4hy8wbkj43la238hg6h8i9wyp1cvvk8kl0giac1020imn5d")))) (build-system gnu-build-system) (inputs `(("gnutls" ,gnutls) ("gss" ,gss) diff --git a/gnu/packages/emacs.scm b/gnu/packages/emacs.scm index af8772eefd..76a8cc566f 100644 --- a/gnu/packages/emacs.scm +++ b/gnu/packages/emacs.scm @@ -1,5 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2014 Taylan Ulrich Bayirli/Kammer <taylanbayirli@gmail.com> ;;; Copyright © 2013 Ludovic Courtès <ludo@gnu.org> +;;; Copyright © 2014 Mark H Weaver <mhw@netris.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -21,6 +23,7 @@ #:use-module (guix packages) #:use-module (guix download) #:use-module (guix build-system gnu) + #:use-module (guix build-system trivial) #:use-module (gnu packages) #:use-module (gnu packages gtk) #:use-module (gnu packages ncurses) @@ -33,10 +36,17 @@ #:use-module (gnu packages image) #:use-module (gnu packages giflib) #:use-module (gnu packages linux) + #:use-module (gnu packages version-control) + #:use-module (gnu packages imagemagick) + #:use-module (gnu packages w3m) + #:use-module (gnu packages wget) + #:use-module (gnu packages autotools) #:use-module ((gnu packages compression) #:renamer (symbol-prefix-proc 'compression:)) #:use-module (gnu packages xml) - #:use-module (gnu packages glib)) + #:use-module (gnu packages glib) + #:use-module (guix utils) + #:use-module (srfi srfi-1)) (define-public emacs (package @@ -102,6 +112,17 @@ large Lisp programs. It has full Unicode support for nearly all human languages.") (license gpl3+))) +(define-public emacs-no-x-toolkit + (package (inherit emacs) + (name "emacs-no-x-toolkit") + (synopsis "The extensible, customizable, self-documenting text +editor (without an X toolkit)" ) + (inputs (alist-delete "gtk+" (package-inputs emacs))) + (arguments + (substitute-keyword-arguments (package-arguments emacs) + ((#:configure-flags flags) + `(cons "--with-x-toolkit=no" ,flags)))))) + ;;; ;;; Emacs hacking. @@ -110,13 +131,13 @@ languages.") (define-public geiser (package (name "geiser") - (version "0.4") + (version "0.6") (source (origin (method url-fetch) (uri (string-append "mirror://savannah/geiser/" version "/geiser-" version ".tar.gz")) (sha256 - (base32 "0ds7zk9b1839l9fsqfsgrby6manvy1cf5bjniiqhxl55h0cr6ijp")))) + (base32 "1mrk0bzqcpfhsw6635qznn47nzfy9ps7wrhkpymswdfpw5mdsry5")))) (build-system gnu-build-system) (inputs `(("guile" ,guile-2.0) ("emacs" ,emacs))) @@ -138,3 +159,212 @@ of the stage in Geiser. A bundle of Elisp shims orchestrates the dialog between the Scheme interpreter, Emacs and, ultimately, the schemer, giving her access to live metadata.") (license bsd-3))) + +(define-public paredit + (package + (name "paredit") + (version "23") + (source (origin + (method url-fetch) + (uri (string-append "http://mumble.net/~campbell/emacs/paredit-" + version ".el")) + (sha256 + (base32 "1np882jzvxckljx3cjz4absyzmc5hw65cs21sjmbic82163m9lf8")))) + (build-system trivial-build-system) + (inputs `(("emacs" ,emacs))) + (arguments + `(#:modules ((guix build utils) + (guix build emacs-utils)) + #:builder + (begin + (use-modules (guix build utils)) + (use-modules (guix build emacs-utils)) + + (let* ((emacs (string-append (assoc-ref %build-inputs "emacs") + "/bin/emacs")) + (source (assoc-ref %build-inputs "source")) + (lisp-dir (string-append %output + "/share/emacs/site-lisp")) + (target (string-append lisp-dir "/paredit.el"))) + (mkdir-p lisp-dir) + (copy-file source target) + (with-directory-excursion lisp-dir + (parameterize ((%emacs emacs)) + (emacs-batch-eval '(byte-compile-file "paredit.el")))))))) + (home-page "http://mumble.net/~campbell/emacs/paredit/") + (synopsis "Emacs minor mode for editing parentheses") + (description + "ParEdit (paredit.el) is a minor mode for performing structured editing +of S-expression data. The typical example of this would be Lisp or Scheme +source code. + +ParEdit helps **keep parentheses balanced** and adds many keys for moving +S-expressions and moving around in S-expressions. Its behavior can be jarring +for those who may want transient periods of unbalanced parentheses, such as +when typing parentheses directly or commenting out code line by line.") + (license gpl3+))) + +(define-public magit + (package + (name "magit") + (version "1.2.0") + (source (origin + (method url-fetch) + (uri (string-append "https://github.com/downloads/magit/magit/magit-" + version ".tar.gz")) + (sha256 + (base32 "1a8vvilhd5y5vmlpsh194qpl4qlg0a1brylfscxcacpfp0cmhlzg")))) + (build-system gnu-build-system) + (native-inputs `(("texinfo" ,texinfo))) + (inputs `(("emacs" ,emacs) + ("git" ,git) + ("git:gui" ,git "gui"))) + (arguments + `(#:modules ((guix build gnu-build-system) + (guix build utils) + (guix build emacs-utils)) + #:imported-modules ((guix build gnu-build-system) + (guix build utils) + (guix build emacs-utils)) + #:tests? #f ; no check target + #:phases + (alist-replace + 'configure + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (substitute* "Makefile" + (("/usr/local") out) + (("/etc") (string-append out "/etc"))))) + (alist-cons-before + 'build 'patch-exec-paths + (lambda* (#:key inputs #:allow-other-keys) + (let ((git (assoc-ref inputs "git")) + (git:gui (assoc-ref inputs "git:gui"))) + (emacs-substitute-variables "magit.el" + ("magit-git-executable" (string-append git "/bin/git")) + ("magit-gitk-executable" (string-append git:gui "/bin/gitk"))))) + %standard-phases)))) + (home-page "http://magit.github.io/") + (synopsis "Emacs interface for the Git version control system") + (description + "With Magit, you can inspect and modify your Git repositories with Emacs. +You can review and commit the changes you have made to the tracked files, for +example, and you can browse the history of past changes. There is support for +cherry picking, reverting, merging, rebasing, and other common Git +operations.") + (license gpl3+))) + + +;;; +;;; Web browsing. +;;; + +(define-public emacs-w3m + (package + (name "emacs-w3m") + (version "1.4.483+0.20120614") + (source (origin + (method url-fetch) + (uri (string-append "mirror://debian/pool/main/w/w3m-el/w3m-el_" + version ".orig.tar.gz")) + (sha256 + (base32 "0ms181gjavnfk79hhv5xl9llik4c6kj0w3c04kgyif8lcy2sxljx")))) + (build-system gnu-build-system) + (native-inputs `(("autoconf" ,autoconf))) + (inputs `(("w3m" ,w3m) + ("imagemagick" ,imagemagick) + ("emacs" ,emacs))) + (arguments + '(#:modules ((guix build gnu-build-system) + (guix build utils) + (guix build emacs-utils)) + #:imported-modules ((guix build gnu-build-system) + (guix build utils) + (guix build emacs-utils)) + #:configure-flags + (let ((out (assoc-ref %outputs "out"))) + (list (string-append "--with-lispdir=" + out "/share/emacs/site-lisp") + (string-append "--with-icondir=" + out "/share/images/emacs-w3m"))) + #:tests? #f ; no check target + #:phases + (alist-cons-before + 'configure 'pre-configure + (lambda _ + (zero? (system* "autoconf"))) + (alist-cons-before + 'build 'patch-exec-paths + (lambda* (#:key inputs outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out")) + (w3m (assoc-ref inputs "w3m")) + (imagemagick (assoc-ref inputs "imagemagick")) + (coreutils (assoc-ref inputs "coreutils"))) + (emacs-substitute-variables "w3m.el" + ("w3m-command" (string-append w3m "/bin/w3m")) + ("w3m-touch-command" (string-append coreutils "/bin/touch")) + ("w3m-image-viewer" (string-append imagemagick "/bin/display")) + ("w3m-icon-directory" (string-append out + "/share/images/emacs-w3m"))) + (emacs-substitute-variables "w3m-image.el" + ("w3m-imagick-convert-program" (string-append imagemagick + "/bin/convert")) + ("w3m-imagick-identify-program" (string-append imagemagick + "/bin/identify"))) + #t)) + (alist-replace + 'install + (lambda* (#:key outputs #:allow-other-keys) + (and (zero? (system* "make" "install" "install-icons")) + (with-directory-excursion + (string-append (assoc-ref outputs "out") + "/share/emacs/site-lisp") + (for-each delete-file '("ChangeLog" "ChangeLog.1")) + #t))) + %standard-phases))))) + (home-page "http://emacs-w3m.namazu.org/") + (synopsis "Simple Web browser for Emacs based on w3m") + (description + "emacs-w3m is an emacs interface for the w3m web browser.") + (license gpl2+))) + +(define-public emacs-wget + (package + (name "emacs-wget") + (version "0.5.0") + (source (origin + (method url-fetch) + (uri (string-append "mirror://debian/pool/main/w/wget-el/wget-el_" + version ".orig.tar.gz")) + (sha256 + (base32 "10byvyv9dk0ib55gfqm7bcpxmx2qbih1jd03gmihrppr2mn52nff")))) + (build-system gnu-build-system) + (inputs `(("wget" ,wget) + ("emacs" ,emacs))) + (arguments + '(#:modules ((guix build gnu-build-system) + (guix build utils) + (guix build emacs-utils)) + #:imported-modules ((guix build gnu-build-system) + (guix build utils) + (guix build emacs-utils)) + #:tests? #f ; no check target + #:phases + (alist-replace + 'configure + (lambda* (#:key outputs #:allow-other-keys) + (substitute* "Makefile" + (("/usr/local") (assoc-ref outputs "out")) + (("/site-lisp/emacs-wget") "/site-lisp"))) + (alist-cons-before + 'build 'patch-exec-paths + (lambda* (#:key inputs outputs #:allow-other-keys) + (let ((wget (assoc-ref inputs "wget"))) + (emacs-substitute-variables "wget.el" + ("wget-command" (string-append wget "/bin/wget"))))) + %standard-phases)))) + (home-page "http://www.emacswiki.org/emacs/EmacsWget") + (synopsis "Simple file downloader for Emacs based on wget") + (description + "emacs-wget is an emacs interface for the wget file downloader.") + (license gpl2+))) diff --git a/gnu/packages/fonts.scm b/gnu/packages/fonts.scm index 8ec59e4d0e..7802d364dd 100644 --- a/gnu/packages/fonts.scm +++ b/gnu/packages/fonts.scm @@ -1,6 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2013 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2014 Mark H Weaver <mhw@netris.org> +;;; Copyright © 2014 Guy Grant <tadnimi@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -22,10 +23,14 @@ #:renamer (symbol-prefix-proc 'license:)) #:use-module (guix packages) #:use-module (guix download) + #:use-module (guix build-system gnu) #:use-module (guix build-system trivial) #:use-module ((gnu packages base) #:select (tar)) - #:use-module (gnu packages compression)) + #:use-module (gnu packages compression) + #:use-module (gnu packages perl) + #:use-module (gnu packages xorg) + #:use-module (gnu packages pkg-config)) (define-public ttf-dejavu (package @@ -198,3 +203,41 @@ package provides the TrueType (TTF) files.") (PostScript Type0, TrueType, OpenType...) fonts covering the ISO 10646/Unicode UCS (Universal Character Set).") (license license:gpl3+))) + +(define-public terminus-font + (package + (name "terminus-font") + (version "4.39") + (source + (origin + (method url-fetch) + (uri (string-append + "mirror://sourceforge/project/terminus-font/terminus-font-" + version + "/terminus-font-" + version + ".tar.gz")) + (sha256 + (base32 + "1gzmn7zakvy6yrvmswyjfklnsvqrjm0imhq8rjws8rdkhqwkh21i")))) + (build-system gnu-build-system) + (native-inputs + `(("pkg-config" ,pkg-config) + ("perl" ,perl) + ("bdftopcf" ,bdftopcf) + ("font-util", font-util) + ("mkfontdir" ,mkfontdir))) + (arguments + `(#:configure-flags (list + ;; install fonts into subdirectory of package output + ;; instead of font-util-?.?.?/share/fonts/X11 + (string-append "--with-fontrootdir=" + %output "/share/fonts/X11")) + #:tests? #f)) ;; No test target in tarball + (home-page "http://terminus-font.sourceforge.net/") + (synopsis "Simple bitmap programming font") + (description "Terminus Font is a clean, fixed width bitmap font, designed +for long (8 and more hours per day) work with computers.") + (license + (license:x11-style + "http://scripts.sil.org/cms/scripts/page.php?item_id=OFL_web")))) diff --git a/gnu/packages/gnunet.scm b/gnu/packages/gnunet.scm index b047032710..e4ef3d4871 100644 --- a/gnu/packages/gnunet.scm +++ b/gnu/packages/gnunet.scm @@ -136,13 +136,13 @@ and support for SSL3 and TLS.") (define-public gnurl (package (name "gnurl") - (version "7.35.0") + (version "7.37.0") (source (origin (method url-fetch) (uri (string-append "https://gnunet.org/sites/default/files/gnurl-" - version ".tar.bz2")) + version ".tar.gz")) (sha256 - (base32 "0dzj22f5z6ppjj1aq1bml64iwbzzcd8w1qy3bgpk6gnzqslsxknf")))) + (base32 "1l2q9ih63vkm65zn886kmhqsx906pzx3qjvsxymlmf18kiv18pfd")))) (build-system gnu-build-system) (inputs `(("gnutls" ,gnutls) ("libidn" ,libidn) diff --git a/gnu/packages/gnupg.scm b/gnu/packages/gnupg.scm index 67964f4374..384ec6289e 100644 --- a/gnu/packages/gnupg.scm +++ b/gnu/packages/gnupg.scm @@ -168,14 +168,14 @@ specifications are building blocks of S/MIME and TLS.") (define-public gnupg (package (name "gnupg") - (version "2.0.25") + (version "2.0.26") (source (origin (method url-fetch) (uri (string-append "mirror://gnupg/gnupg/gnupg-" version ".tar.bz2")) (sha256 (base32 - "08sqdkybgw4jkdkcyz1bi6y8irj87hpr5b12lkb57kwny1yykaxk")))) + "1q5qcl5panrvcvpwvz6nl9gayl5a6vwvfhgdcxqpmbl2qc6y6n3p")))) (build-system gnu-build-system) (inputs `(("bzip2" ,guix:bzip2) @@ -234,7 +234,7 @@ libskba (working with X.509 certificates and CMS data).") (define-public gpgme (package (name "gpgme") - (version "1.4.3") + (version "1.5.1") (source (origin (method url-fetch) @@ -242,7 +242,7 @@ libskba (working with X.509 certificates and CMS data).") ".tar.bz2")) (sha256 (base32 - "15h429h6pd67iiv580bjmwbkadpxsdppw0xrqpcm4dvm24jc271d")))) + "1qqi9bxwxxsc4r15j7drclgp0w8jk9nj3h2fsivk4c7brvw3lbvc")))) (build-system gnu-build-system) (propagated-inputs ;; Needs to be propagated because gpgme.h includes gpg-error.h. @@ -250,6 +250,7 @@ libskba (working with X.509 certificates and CMS data).") (inputs `(("gnupg" ,gnupg) ("libassuan" ,libassuan))) + (arguments '(#:make-flags '("GPG=gpg2"))) (home-page "http://www.gnupg.org/related_software/gpgme/") (synopsis "library providing simplified access to GnuPG functionality") (description diff --git a/gnu/packages/guile.scm b/gnu/packages/guile.scm index 8433b51263..064c859e69 100644 --- a/gnu/packages/guile.scm +++ b/gnu/packages/guile.scm @@ -327,14 +327,14 @@ for Guile\".") (define-public guile-json (package (name "guile-json") - (version "0.3.1") + (version "0.4.0") (source (origin (method url-fetch) (uri (string-append "mirror://savannah/guile-json/guile-json-" version ".tar.gz")) (sha256 (base32 - "0nz2sx61kd6cfflwzxxq0cb9dz0asb81abbhfawv4p9ghciqdr3g")) + "0v06272rw4ycwzssjf3fzpk2vhpslvl55hz94q80vc6f74j0d5h6")) (modules '((guix build utils))) (snippet ;; Make sure everything goes under .../site/2.0, like Guile's diff --git a/gnu/packages/libftdi.scm b/gnu/packages/libftdi.scm index 6e8100ce29..5c2671aac7 100644 --- a/gnu/packages/libftdi.scm +++ b/gnu/packages/libftdi.scm @@ -37,12 +37,12 @@ (base32 "088yh8pxd6q53ssqndydcw1dkq51cjqyahc03lm6iip22cdazcf0")))) (build-system cmake-build-system) - (native-inputs + (inputs `(("libusb" ,libusb))) - (home-page "http://www.intra2net.com") + (home-page "http://www.intra2net.com/en/developer/libftdi/") (synopsis "FTDI USB driver with bitbang mode") (description "libFTDI is a library to talk to FTDI chips: FT232BM, FT245BM, FT2232C, FT2232D, FT245R and FT232H including the popular bitbangmode.") - (license lgpl2.1+))) + (license lgpl2.1))) diff --git a/gnu/packages/lightning.scm b/gnu/packages/lightning.scm index 01a839ebb9..58296003cb 100644 --- a/gnu/packages/lightning.scm +++ b/gnu/packages/lightning.scm @@ -25,14 +25,14 @@ (define-public lightning (package (name "lightning") - (version "2.0.4") + (version "2.0.5") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/lightning/lightning-" version ".tar.gz")) (sha256 (base32 - "1lrckrx51d5hrv66bc99fd4b7g2wwn4vr304hwq3glfzhb8jqcdy")))) + "0jm9a8ddxc1v9hyzyv4ybg37fjac2yjqv1hkd262wxzqms36mdk5")))) (build-system gnu-build-system) (synopsis "Library for generating assembly code at runtime") (description diff --git a/gnu/packages/linux-libre-i686.conf b/gnu/packages/linux-libre-i686.conf index edef148360..10686b1bc6 100644 --- a/gnu/packages/linux-libre-i686.conf +++ b/gnu/packages/linux-libre-i686.conf @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 3.15.3-gnu Kernel Configuration +# Linux/x86 3.16.0 Kernel Configuration # # CONFIG_64BIT is not set CONFIG_X86_32=y @@ -38,6 +38,7 @@ CONFIG_X86_32_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_FIX_EARLYCON_MEM=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y @@ -68,6 +69,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_FHANDLE=y CONFIG_USELIB=y CONFIG_AUDIT=y @@ -81,6 +83,7 @@ CONFIG_AUDIT_TREE=y # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y @@ -134,7 +137,6 @@ CONFIG_RCU_FAST_NO_HZ=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y -CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set @@ -153,7 +155,7 @@ CONFIG_CGROUP_PERF=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y -CONFIG_RT_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set CONFIG_CHECKPOINT_RESTORE=y @@ -164,7 +166,6 @@ CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_SCHED_AUTOGROUP=y -CONFIG_MM_OWNER=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y @@ -183,6 +184,7 @@ CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_EXPERT=y CONFIG_UID16=y +CONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -239,6 +241,7 @@ CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_CLK=y @@ -264,7 +267,6 @@ CONFIG_CC_STACKPROTECTOR_REGULAR=y # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND3=y @@ -285,6 +287,11 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_SIG_SHA1 is not set +# CONFIG_MODULE_SIG_SHA224 is not set +# CONFIG_MODULE_SIG_SHA256 is not set +# CONFIG_MODULE_SIG_SHA384 is not set +# CONFIG_MODULE_SIG_SHA512 is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBDAF=y @@ -299,11 +306,11 @@ CONFIG_BLK_CMDLINE_PARSER=y # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y -# CONFIG_ACORN_PARTITION_CUMANA is not set -# CONFIG_ACORN_PARTITION_EESOX is not set +CONFIG_ACORN_PARTITION_CUMANA=y +CONFIG_ACORN_PARTITION_EESOX=y CONFIG_ACORN_PARTITION_ICS=y -# CONFIG_ACORN_PARTITION_ADFS is not set -# CONFIG_ACORN_PARTITION_POWERTEC is not set +CONFIG_ACORN_PARTITION_ADFS=y +CONFIG_ACORN_PARTITION_POWERTEC=y CONFIG_ACORN_PARTITION_RISCIX=y CONFIG_AIX_PARTITION=y CONFIG_OSF_PARTITION=y @@ -345,7 +352,11 @@ CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_ARCH_USE_QUEUE_RWLOCK=y +CONFIG_QUEUE_RWLOCK=y CONFIG_FREEZER=y # @@ -431,8 +442,8 @@ CONFIG_IOMMU_HELPER=y CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y @@ -445,15 +456,18 @@ CONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=m CONFIG_X86_THERMAL_VECTOR=y CONFIG_VM86=y +CONFIG_X86_16BIT=y +CONFIG_X86_ESPFIX32=y # CONFIG_TOSHIBA is not set CONFIG_I8K=m CONFIG_X86_REBOOTFIXUPS=y -CONFIG_MICROCODE=m +CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y -# CONFIG_MICROCODE_INTEL_EARLY is not set -# CONFIG_MICROCODE_AMD_EARLY is not set +CONFIG_MICROCODE_INTEL_EARLY=y +CONFIG_MICROCODE_AMD_EARLY=y +CONFIG_MICROCODE_EARLY=y CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # CONFIG_NOHIGHMEM is not set @@ -501,14 +515,12 @@ CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_CLEANCACHE=y CONFIG_FRONTSWAP=y CONFIG_CMA=y # CONFIG_CMA_DEBUG is not set CONFIG_ZBUD=y CONFIG_ZSWAP=y -CONFIG_MEM_SOFT_DIRTY=y CONFIG_ZSMALLOC=y CONFIG_PGTABLE_MAPPING=y CONFIG_GENERIC_EARLY_IOREMAP=y @@ -539,6 +551,8 @@ CONFIG_CRASH_DUMP=y CONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y +CONFIG_RANDOMIZE_BASE=y +CONFIG_RANDOMIZE_BASE_MAX_OFFSET=0x20000000 CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y @@ -787,6 +801,7 @@ CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_COREDUMP=y CONFIG_HAVE_ATOMIC_IOMAP=y +CONFIG_IOSF_MBI=m CONFIG_NET=y # @@ -980,7 +995,7 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NETMAP=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_REDIRECT=m CONFIG_NETFILTER_XT_TARGET_TEE=m @@ -1056,7 +1071,7 @@ CONFIG_IP_SET_HASH_NETPORT=m CONFIG_IP_SET_HASH_NETIFACE=m CONFIG_IP_SET_LIST_SET=m CONFIG_IP_VS=m -# CONFIG_IP_VS_IPV6 is not set +CONFIG_IP_VS_IPV6=y # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 @@ -1168,6 +1183,7 @@ CONFIG_IP6_NF_TARGET_NPT=m # CONFIG_DECNET_NF_GRABULATOR=m CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NFT_BRIDGE_META=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -1404,7 +1420,6 @@ CONFIG_CAN_SLCAN=m CONFIG_CAN_DEV=m CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_LEDS=y -CONFIG_CAN_MCP251X=m CONFIG_CAN_JANZ_ICAN3=m CONFIG_PCH_CAN=m CONFIG_CAN_SJA1000=m @@ -1426,10 +1441,16 @@ CONFIG_CAN_CC770_ISA=m CONFIG_CAN_CC770_PLATFORM=m # +# CAN SPI interfaces +# +CONFIG_CAN_MCP251X=m + +# # CAN USB interfaces # CONFIG_CAN_EMS_USB=m CONFIG_CAN_ESD_USB2=m +CONFIG_CAN_GS_USB=m CONFIG_CAN_KVASER_USB=m CONFIG_CAN_PEAK_USB=m CONFIG_CAN_8DEV_USB=m @@ -1537,7 +1558,7 @@ CONFIG_WEXT_PROC=y CONFIG_WEXT_SPY=y CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m -CONFIG_NL80211_TESTMODE=y +# CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set @@ -1605,6 +1626,8 @@ CONFIG_NFC_MICROREAD_I2C=m CONFIG_NFC_MICROREAD_MEI=m CONFIG_NFC_MRVL=m CONFIG_NFC_MRVL_USB=m +CONFIG_NFC_ST21NFCA=m +CONFIG_NFC_ST21NFCA_I2C=m # # Device Drivers @@ -1613,6 +1636,7 @@ CONFIG_NFC_MRVL_USB=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -1633,6 +1657,18 @@ CONFIG_REGMAP_SPI=y CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_DMA_SHARED_BUFFER=y +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=64 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +CONFIG_CMA_AREAS=7 # # Bus devices @@ -1695,8 +1731,6 @@ CONFIG_MTD_ABSENT=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=m # CONFIG_MTD_PHYSMAP_COMPAT is not set -CONFIG_MTD_SC520CDP=m -CONFIG_MTD_NETSC520=m CONFIG_MTD_SBC_GXX=m CONFIG_MTD_SCx200_DOCFLASH=m CONFIG_MTD_AMD76XROM=m @@ -1767,18 +1801,19 @@ CONFIG_MTD_ONENAND_GENERIC=m CONFIG_MTD_ONENAND_2X_PROGRAM=y # -# LPDDR flash memory drivers +# LPDDR & LPDDR2 PCM memory drivers # CONFIG_MTD_LPDDR=m CONFIG_MTD_QINFO_PROBE=m +CONFIG_MTD_SPI_NOR=m CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_GLUEBI=m CONFIG_MTD_UBI_BLOCK=y -CONFIG_PARPORT=m CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m CONFIG_PARPORT_PC_FIFO=y @@ -1871,7 +1906,6 @@ CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m CONFIG_AD525X_DPOT_SPI=m -CONFIG_ATMEL_PWM=m CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m @@ -1880,7 +1914,6 @@ CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m -CONFIG_ATMEL_SSC=m CONFIG_ENCLOSURE_SERVICES=m # CONFIG_CS5535_MFGPT is not set CONFIG_HP_ILO=m @@ -1974,7 +2007,7 @@ CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # -CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m @@ -2004,7 +2037,7 @@ CONFIG_SCSI_AHA1740=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +CONFIG_AIC7XXX_RESET_DELAY_MS=5000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y @@ -2075,12 +2108,13 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_IPR=m -# CONFIG_SCSI_IPR_TRACE is not set -# CONFIG_SCSI_IPR_DUMP is not set +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y CONFIG_SCSI_PAS16=m CONFIG_SCSI_QLOGIC_FAS=m CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLA_FC=m +CONFIG_TCM_QLA2XXX=m CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_LPFC_DEBUG_FS is not set @@ -2303,7 +2337,12 @@ CONFIG_DUMMY=m CONFIG_EQUALIZER=m CONFIG_NET_FC=y CONFIG_IFB=m -# CONFIG_NET_TEAM is not set +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m CONFIG_VXLAN=m @@ -2499,7 +2538,7 @@ CONFIG_MLX4_EN=m CONFIG_MLX4_EN_DCB=y CONFIG_MLX4_EN_VXLAN=y CONFIG_MLX4_CORE=m -# CONFIG_MLX4_DEBUG is not set +CONFIG_MLX4_DEBUG=y CONFIG_MLX5_CORE=m CONFIG_NET_VENDOR_MICREL=y CONFIG_KS8842=m @@ -2537,6 +2576,7 @@ CONFIG_QLCNIC=m CONFIG_QLCNIC_SRIOV=y CONFIG_QLCNIC_DCB=y CONFIG_QLCNIC_VXLAN=y +CONFIG_QLCNIC_HWMON=y CONFIG_QLGE=m CONFIG_NETXEN_NIC=m CONFIG_NET_VENDOR_REALTEK=y @@ -2608,27 +2648,27 @@ CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_AT803X_PHY=y -CONFIG_AMD_PHY=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y +CONFIG_AT803X_PHY=m +CONFIG_AMD_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m CONFIG_BCM7XXX_PHY=m -CONFIG_BCM87XX_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_MICREL_PHY=y +CONFIG_BCM87XX_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MICREL_PHY=m CONFIG_FIXED_PHY=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_GPIO=y +CONFIG_MDIO_BITBANG=m +CONFIG_MDIO_GPIO=m CONFIG_MICREL_KS8995MA=m CONFIG_PLIP=m CONFIG_PPP=y @@ -2756,6 +2796,9 @@ CONFIG_WCN36XX=m CONFIG_B43=m CONFIG_B43_BCMA=y CONFIG_B43_SSB=y +CONFIG_B43_BUSES_BCMA_AND_SSB=y +# CONFIG_B43_BUSES_BCMA is not set +# CONFIG_B43_BUSES_SSB is not set CONFIG_B43_PCI_AUTOSELECT=y CONFIG_B43_PCICORE_AUTOSELECT=y # CONFIG_B43_PCMCIA is not set @@ -2804,6 +2847,7 @@ CONFIG_IPW2200_QOS=y CONFIG_LIBIPW=m # CONFIG_LIBIPW_DEBUG is not set CONFIG_IWLWIFI=m +CONFIG_IWLWIFI_LEDS=y CONFIG_IWLDVM=m CONFIG_IWLMVM=m CONFIG_IWLWIFI_OPMODE_MODULAR=y @@ -2910,7 +2954,7 @@ CONFIG_CW1200=m CONFIG_CW1200_WLAN_SDIO=m CONFIG_CW1200_WLAN_SPI=m CONFIG_RSI_91X=m -CONFIG_RSI_DEBUGFS=y +# CONFIG_RSI_DEBUGFS is not set CONFIG_RSI_SDIO=m CONFIG_RSI_USB=m @@ -3051,11 +3095,11 @@ CONFIG_ISDN_DRV_PCBIT=m CONFIG_ISDN_DRV_SC=m CONFIG_ISDN_DRV_ACT2000=m CONFIG_ISDN_CAPI=m -CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_CAPI_TRACE=y CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPIDRV=m +# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set # # CAPI hardware drivers @@ -3151,8 +3195,8 @@ CONFIG_KEYBOARD_OPENCORES=m CONFIG_KEYBOARD_SAMSUNG=m CONFIG_KEYBOARD_STOWAWAY=m CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_STMPE=m CONFIG_KEYBOARD_TC3589X=m +CONFIG_KEYBOARD_TWL4030=m CONFIG_KEYBOARD_XTKBD=m CONFIG_KEYBOARD_CROS_EC=m CONFIG_INPUT_MOUSE=y @@ -3287,10 +3331,8 @@ CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC2005=m CONFIG_TOUCHSCREEN_TSC2007=m -CONFIG_TOUCHSCREEN_W90X900=m CONFIG_TOUCHSCREEN_PCAP=m CONFIG_TOUCHSCREEN_ST1232=m -CONFIG_TOUCHSCREEN_STMPE=m CONFIG_TOUCHSCREEN_SUR40=m CONFIG_TOUCHSCREEN_TPS6507X=m CONFIG_TOUCHSCREEN_ZFORCE=m @@ -3310,6 +3352,7 @@ CONFIG_INPUT_MMA8450=m CONFIG_INPUT_MPU3050=m CONFIG_INPUT_APANEL=m CONFIG_INPUT_GP2A=m +CONFIG_INPUT_GPIO_BEEPER=m CONFIG_INPUT_GPIO_TILT_POLLED=m CONFIG_INPUT_WISTRON_BTNS=m CONFIG_INPUT_ATLAS_BTNS=m @@ -3321,6 +3364,8 @@ CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_RETU_PWRBUTTON=m +CONFIG_INPUT_TWL4030_PWRBUTTON=m +CONFIG_INPUT_TWL4030_VIBRA=m CONFIG_INPUT_TWL6040_VIBRA=m CONFIG_INPUT_UINPUT=y CONFIG_INPUT_PCF50633_PMU=m @@ -3397,11 +3442,11 @@ CONFIG_TRACE_SINK=m # # Serial drivers # +CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_CS=m @@ -3434,6 +3479,7 @@ CONFIG_CONSOLE_POLL=y CONFIG_SERIAL_JSM=m CONFIG_SERIAL_SCCNXP=y CONFIG_SERIAL_SCCNXP_CONSOLE=y +CONFIG_SERIAL_SC16IS7XX=m CONFIG_SERIAL_TIMBERDALE=m CONFIG_SERIAL_ALTERA_JTAGUART=m CONFIG_SERIAL_ALTERA_UART=m @@ -3446,6 +3492,7 @@ CONFIG_SERIAL_ARC_NR_PORTS=1 CONFIG_SERIAL_RP2=m CONFIG_SERIAL_RP2_NR_UARTS=32 CONFIG_SERIAL_FSL_LPUART=m +CONFIG_SERIAL_MEN_Z135=m CONFIG_TTY_PRINTK=y CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set @@ -3466,11 +3513,9 @@ CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m -# CONFIG_HW_RANDOM_ATMEL is not set CONFIG_HW_RANDOM_GEODE=m CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_HW_RANDOM_EXYNOS=m CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=m CONFIG_DTLK=m @@ -3586,6 +3631,7 @@ CONFIG_I2C_VIPERBOARD=m # Other I2C/SMBus bus drivers # CONFIG_I2C_PCA_ISA=m +CONFIG_I2C_CROS_EC_TUNNEL=m # CONFIG_SCx200_I2C is not set CONFIG_SCx200_ACB=m CONFIG_I2C_STUB=m @@ -3627,6 +3673,10 @@ CONFIG_HSI=m CONFIG_HSI_BOARDINFO=y # +# HSI controllers +# + +# # HSI clients # CONFIG_HSI_CHAR=m @@ -3671,8 +3721,9 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y # CONFIG_DEBUG_GPIO is not set -# CONFIG_GPIO_SYSFS is not set +CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC=m CONFIG_GPIO_DA9052=m CONFIG_GPIO_DA9055=m @@ -3701,9 +3752,9 @@ CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m CONFIG_GPIO_RC5T583=y CONFIG_GPIO_SX150X=y -CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y CONFIG_GPIO_TPS65912=m +CONFIG_GPIO_TWL4030=m CONFIG_GPIO_TWL6040=m CONFIG_GPIO_WM831X=m CONFIG_GPIO_WM8350=m @@ -3802,11 +3853,14 @@ CONFIG_BATTERY_DA9030=m CONFIG_BATTERY_DA9052=m CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m +CONFIG_BATTERY_TWL4030_MADC=m CONFIG_CHARGER_88PM860X=m CONFIG_CHARGER_PCF50633=m CONFIG_BATTERY_INTEL_MID=m +CONFIG_BATTERY_RX51=m CONFIG_CHARGER_ISP1704=m CONFIG_CHARGER_MAX8903=m +CONFIG_CHARGER_TWL4030=m CONFIG_CHARGER_LP8727=m CONFIG_CHARGER_LP8788=m CONFIG_CHARGER_GPIO=m @@ -3914,6 +3968,7 @@ CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_SENSORS_NCT6683=m CONFIG_SENSORS_NCT6775=m CONFIG_SENSORS_PCF8591=m CONFIG_PMBUS=m @@ -3929,6 +3984,7 @@ CONFIG_SENSORS_UCD9200=m CONFIG_SENSORS_ZL6100=m CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SHTC1=m CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_DME1737=m CONFIG_SENSORS_EMC1403=m @@ -3952,6 +4008,7 @@ CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP102=m CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_TWL4030_MADC=m CONFIG_SENSORS_VIA_CPUTEMP=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m @@ -3986,6 +4043,7 @@ CONFIG_THERMAL_EMULATION=y CONFIG_INTEL_POWERCLAMP=m CONFIG_X86_PKG_TEMP_THERMAL=m CONFIG_ACPI_INT3403_THERMAL=m +CONFIG_INTEL_SOC_DTS_THERMAL=m # # Texas Instruments thermal drivers @@ -4004,6 +4062,7 @@ CONFIG_WM831X_WATCHDOG=m CONFIG_WM8350_WATCHDOG=m CONFIG_XILINX_WATCHDOG=m CONFIG_DW_WATCHDOG=m +CONFIG_TWL4030_WATCHDOG=m CONFIG_RETU_WATCHDOG=m CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m @@ -4019,6 +4078,7 @@ CONFIG_WAFER_WDT=m CONFIG_I6300ESB_WDT=m CONFIG_IE6XX_WDT=m CONFIG_INTEL_SCU_WATCHDOG=y +CONFIG_INTEL_MID_WATCHDOG=m CONFIG_ITCO_WDT=m CONFIG_ITCO_VENDOR_SUPPORT=y CONFIG_IT8712F_WDT=m @@ -4038,8 +4098,6 @@ CONFIG_SMSC_SCH311X_WDT=m CONFIG_SMSC37B787_WDT=m CONFIG_VIA_WDT=m CONFIG_W83627HF_WDT=m -CONFIG_W83697HF_WDT=m -CONFIG_W83697UG_WDT=m CONFIG_W83877F_WDT=m CONFIG_W83977F_WDT=m CONFIG_MACHZ_WDT=m @@ -4107,6 +4165,7 @@ CONFIG_MFD_AS3711=y CONFIG_PMIC_ADP5520=y CONFIG_MFD_AAT2870_CORE=y CONFIG_MFD_BCM590XX=m +CONFIG_MFD_AXP20X=y CONFIG_MFD_CROS_EC=m CONFIG_MFD_CROS_EC_I2C=m CONFIG_PMIC_DA903X=y @@ -4149,18 +4208,11 @@ CONFIG_MFD_RC5T583=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_SI476X_CORE=m CONFIG_MFD_SM501=m -# CONFIG_MFD_SM501_GPIO is not set +CONFIG_MFD_SM501_GPIO=y CONFIG_MFD_SMSC=y CONFIG_ABX500_CORE=y CONFIG_AB3100_CORE=y CONFIG_AB3100_OTP=m -CONFIG_MFD_STMPE=y - -# -# STMicroelectronics STMPE Interface Drivers -# -CONFIG_STMPE_I2C=y -CONFIG_STMPE_SPI=y CONFIG_MFD_SYSCON=y CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_LP3943=m @@ -4178,7 +4230,8 @@ CONFIG_MFD_TPS65912=y CONFIG_MFD_TPS65912_I2C=y CONFIG_MFD_TPS65912_SPI=y CONFIG_MFD_TPS80031=y -# CONFIG_TWL4030_CORE is not set +CONFIG_TWL4030_CORE=y +CONFIG_MFD_TWL4030_AUDIO=y CONFIG_TWL6040_CORE=y CONFIG_MFD_WL1273_CORE=m CONFIG_MFD_LM3533=m @@ -4205,7 +4258,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=m CONFIG_REGULATOR_VIRTUAL_CONSUMER=m CONFIG_REGULATOR_USERSPACE_CONSUMER=m CONFIG_REGULATOR_88PM800=m -CONFIG_REGULATOR_88PM8607=y +CONFIG_REGULATOR_88PM8607=m CONFIG_REGULATOR_ACT8865=m CONFIG_REGULATOR_AD5398=m CONFIG_REGULATOR_ANATOP=m @@ -4213,6 +4266,7 @@ CONFIG_REGULATOR_AAT2870=m CONFIG_REGULATOR_AB3100=m CONFIG_REGULATOR_ARIZONA=m CONFIG_REGULATOR_AS3711=m +CONFIG_REGULATOR_AXP20X=m CONFIG_REGULATOR_BCM590XX=m CONFIG_REGULATOR_DA903X=m CONFIG_REGULATOR_DA9052=m @@ -4224,9 +4278,10 @@ CONFIG_REGULATOR_GPIO=m CONFIG_REGULATOR_ISL6271A=m CONFIG_REGULATOR_LP3971=m CONFIG_REGULATOR_LP3972=m -CONFIG_REGULATOR_LP872X=y +CONFIG_REGULATOR_LP872X=m CONFIG_REGULATOR_LP8755=m -CONFIG_REGULATOR_LP8788=y +CONFIG_REGULATOR_LP8788=m +CONFIG_REGULATOR_LTC3589=m CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX1586=m CONFIG_REGULATOR_MAX8649=m @@ -4248,7 +4303,7 @@ CONFIG_REGULATOR_PCF50633=m CONFIG_REGULATOR_PFUZE100=m CONFIG_REGULATOR_RC5T583=m CONFIG_REGULATOR_S2MPA01=m -# CONFIG_REGULATOR_S2MPS11 is not set +CONFIG_REGULATOR_S2MPS11=m CONFIG_REGULATOR_S5M8767=m CONFIG_REGULATOR_TPS51632=m CONFIG_REGULATOR_TPS6105X=m @@ -4262,6 +4317,7 @@ CONFIG_REGULATOR_TPS6586X=m CONFIG_REGULATOR_TPS65910=m CONFIG_REGULATOR_TPS65912=m CONFIG_REGULATOR_TPS80031=m +CONFIG_REGULATOR_TWL4030=m CONFIG_REGULATOR_WM831X=m CONFIG_REGULATOR_WM8350=m CONFIG_REGULATOR_WM8400=m @@ -4276,8 +4332,9 @@ CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_RADIO_SUPPORT=y CONFIG_MEDIA_RC_SUPPORT=y -# CONFIG_MEDIA_CONTROLLER is not set +CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=m # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set @@ -4293,6 +4350,7 @@ CONFIG_VIDEOBUF2_MEMOPS=m CONFIG_VIDEOBUF2_DMA_CONTIG=m CONFIG_VIDEOBUF2_VMALLOC=m CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_VIDEOBUF2_DVB=m CONFIG_DVB_CORE=m CONFIG_DVB_NET=y CONFIG_TTPCI_EEPROM=m @@ -4353,6 +4411,7 @@ CONFIG_USB_GL860=m CONFIG_USB_GSPCA_BENQ=m CONFIG_USB_GSPCA_CONEX=m CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_DTCS033=m CONFIG_USB_GSPCA_ETOMS=m CONFIG_USB_GSPCA_FINEPIX=m CONFIG_USB_GSPCA_JEILINJ=m @@ -4568,6 +4627,7 @@ CONFIG_VIDEO_SH_MOBILE_CEU=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m CONFIG_VIDEO_SH_VEU=m +CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVI=m CONFIG_VIDEO_MEM2MEM_TESTDEV=m @@ -4781,6 +4841,7 @@ CONFIG_MEDIA_TUNER_E4000=m CONFIG_MEDIA_TUNER_FC2580=m CONFIG_MEDIA_TUNER_M88TS2022=m CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m CONFIG_MEDIA_TUNER_IT913X=m CONFIG_MEDIA_TUNER_R820T=m @@ -4853,6 +4914,7 @@ CONFIG_DVB_STV0367=m CONFIG_DVB_CXD2820R=m CONFIG_DVB_RTL2830=m CONFIG_DVB_RTL2832=m +CONFIG_DVB_SI2168=m # # DVB-C (cable) frontends @@ -4949,10 +5011,11 @@ CONFIG_DRM_TTM=m CONFIG_DRM_I2C_CH7006=m CONFIG_DRM_I2C_SIL164=m CONFIG_DRM_I2C_NXP_TDA998X=m +CONFIG_DRM_PTN3460=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m -CONFIG_DRM_RADEON_UMS=y +# CONFIG_DRM_RADEON_UMS is not set CONFIG_DRM_NOUVEAU=m CONFIG_NOUVEAU_DEBUG=5 CONFIG_NOUVEAU_DEBUG_DEFAULT=3 @@ -4962,7 +5025,6 @@ CONFIG_DRM_I915=m CONFIG_DRM_I915_KMS=y CONFIG_DRM_I915_FBDEV=y CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT=y -# CONFIG_DRM_I915_UMS is not set CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m @@ -4972,14 +5034,13 @@ CONFIG_DRM_VMWGFX_FBCON=y CONFIG_DRM_GMA500=m CONFIG_DRM_GMA600=y CONFIG_DRM_GMA3600=y -# CONFIG_DRM_MEDFIELD is not set +CONFIG_DRM_MEDFIELD=y CONFIG_DRM_UDL=m CONFIG_DRM_AST=m # CONFIG_DRM_MGAG200 is not set CONFIG_DRM_CIRRUS_QEMU=m CONFIG_DRM_QXL=m CONFIG_DRM_BOCHS=m -CONFIG_DRM_PTN3460=m # # Frame buffer Devices @@ -5036,7 +5097,7 @@ CONFIG_FB_LE80578=m CONFIG_FB_CARILLO_RANCH=m CONFIG_FB_INTEL=m # CONFIG_FB_INTEL_DEBUG is not set -# CONFIG_FB_INTEL_I2C is not set +CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y @@ -5057,7 +5118,7 @@ CONFIG_FB_ATY_BACKLIGHT=y CONFIG_FB_S3=m CONFIG_FB_S3_DDC=y CONFIG_FB_SAVAGE=m -# CONFIG_FB_SAVAGE_I2C is not set +CONFIG_FB_SAVAGE_I2C=y # CONFIG_FB_SAVAGE_ACCEL is not set CONFIG_FB_SIS=m CONFIG_FB_SIS_300=y @@ -5082,12 +5143,9 @@ CONFIG_FB_GEODE=y CONFIG_FB_GEODE_LX=m CONFIG_FB_GEODE_GX=m CONFIG_FB_GEODE_GX1=m -CONFIG_FB_TMIO=m -CONFIG_FB_TMIO_ACCELL=y CONFIG_FB_SM501=m CONFIG_FB_SMSCUFX=m CONFIG_FB_UDL=m -CONFIG_FB_GOLDFISH=m # CONFIG_FB_VIRTUAL is not set CONFIG_XEN_FBDEV_FRONTEND=m CONFIG_FB_METRONOME=m @@ -5100,7 +5158,6 @@ CONFIG_FB_AUO_K1900=m CONFIG_FB_AUO_K1901=m CONFIG_FB_HYPERV=m CONFIG_FB_SIMPLE=y -CONFIG_EXYNOS_VIDEO=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m CONFIG_LCD_L4F00242T03=m @@ -5117,7 +5174,6 @@ CONFIG_LCD_AMS369FG06=m CONFIG_LCD_LMS501KF03=m CONFIG_LCD_HX8357=m CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_PWM=m CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_LM3533=m CONFIG_BACKLIGHT_CARILLO_RANCH=m @@ -5138,6 +5194,7 @@ CONFIG_BACKLIGHT_LM3630A=m CONFIG_BACKLIGHT_LM3639=m CONFIG_BACKLIGHT_LP855X=m CONFIG_BACKLIGHT_LP8788=m +CONFIG_BACKLIGHT_PANDORA=m CONFIG_BACKLIGHT_TPS65217=m CONFIG_BACKLIGHT_AS3711=m CONFIG_BACKLIGHT_GPIO=m @@ -5162,17 +5219,20 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_LIBRE_CLUT224=y CONFIG_SOUND=m -# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m +CONFIG_SND_DMAENGINE_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_COMPRESS_OFFLOAD=m CONFIG_SND_JACK=y CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_MIXER_OSS is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_SEQUENCER_OSS is not set CONFIG_SND_HRTIMER=m @@ -5182,9 +5242,7 @@ CONFIG_SND_MAX_CARDS=32 CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set -CONFIG_SND_DEBUG=y -# CONFIG_SND_DEBUG_VERBOSE is not set -CONFIG_SND_PCM_XRUN_DEBUG=y +# CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_KCTL_JACK=y CONFIG_SND_DMA_SGBUF=y @@ -5353,8 +5411,6 @@ CONFIG_SND_HDA_CODEC_SI3054=m CONFIG_SND_HDA_GENERIC=m CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 CONFIG_SND_SPI=y -CONFIG_SND_AT73C213=m -CONFIG_SND_AT73C213_TARGET_BITRATE=48000 CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_UA101=m @@ -5364,18 +5420,36 @@ CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_USB_US122L=m CONFIG_SND_USB_6FIRE=m CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m CONFIG_SND_FIREWIRE=y CONFIG_SND_FIREWIRE_LIB=m CONFIG_SND_DICE=m CONFIG_SND_FIREWIRE_SPEAKERS=m CONFIG_SND_ISIGHT=m CONFIG_SND_SCS1X=m +CONFIG_SND_FIREWORKS=m +CONFIG_SND_BEBOB=m CONFIG_SND_PCMCIA=y CONFIG_SND_VXPOCKET=m CONFIG_SND_PDAUDIOCF=m CONFIG_SND_SOC=m +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y CONFIG_SND_ATMEL_SOC=m CONFIG_SND_DESIGNWARE_I2S=m + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +CONFIG_SND_SOC_FSL_SAI=m +CONFIG_SND_SOC_FSL_SSI=m +CONFIG_SND_SOC_FSL_SPDIF=m +CONFIG_SND_SOC_FSL_ESAI=m +CONFIG_SND_SOC_FSL_UTILS=m +CONFIG_SND_SOC_IMX_AUDMUX=m CONFIG_SND_MFLD_MACHINE=m CONFIG_SND_SST_MFLD_PLATFORM=m CONFIG_SND_SOC_INTEL_SST=m @@ -5384,6 +5458,7 @@ CONFIG_SND_SOC_INTEL_HASWELL=m CONFIG_SND_SOC_INTEL_BAYTRAIL=m CONFIG_SND_SOC_INTEL_HASWELL_MACH=m CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH=m +CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH=m CONFIG_SND_SOC_I2C_AND_SPI=m # @@ -5394,25 +5469,31 @@ CONFIG_SND_SOC_AK4104=m CONFIG_SND_SOC_AK4554=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_AK5386=m +CONFIG_SND_SOC_ALC5623=m CONFIG_SND_SOC_CS42L52=m +CONFIG_SND_SOC_CS42L56=m CONFIG_SND_SOC_CS42L73=m CONFIG_SND_SOC_CS4270=m CONFIG_SND_SOC_CS4271=m CONFIG_SND_SOC_CS42XX8=m CONFIG_SND_SOC_CS42XX8_I2C=m CONFIG_SND_SOC_HDMI_CODEC=m +CONFIG_SND_SOC_MAX98090=m CONFIG_SND_SOC_PCM1681=m CONFIG_SND_SOC_PCM1792A=m CONFIG_SND_SOC_PCM512x=m CONFIG_SND_SOC_PCM512x_I2C=m CONFIG_SND_SOC_PCM512x_SPI=m +CONFIG_SND_SOC_RL6231=m CONFIG_SND_SOC_RT5640=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SI476X=m CONFIG_SND_SOC_SIGMADSP=m +CONFIG_SND_SOC_SIGMADSP_I2C=m CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m CONFIG_SND_SOC_SN95031=m CONFIG_SND_SOC_SPDIF=m +CONFIG_SND_SOC_STA350=m CONFIG_SND_SOC_TAS5086=m CONFIG_SND_SOC_TLV320AIC3X=m CONFIG_SND_SOC_WM8510=m @@ -5507,6 +5588,7 @@ CONFIG_SONY_FF=y CONFIG_HID_SPEEDLINK=m CONFIG_HID_STEELSERIES=m CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m CONFIG_HID_GREENASIA=m CONFIG_GREENASIA_FF=y CONFIG_HID_HYPERV_MOUSE=m @@ -5547,7 +5629,6 @@ CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # @@ -5558,6 +5639,7 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_OTG=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_OTG_FSM=m CONFIG_USB_MON=m CONFIG_USB_WUSB=m CONFIG_USB_WUSB_CBAF=m @@ -5580,8 +5662,9 @@ CONFIG_USB_ISP1760_HCD=m CONFIG_USB_ISP1362_HCD=m CONFIG_USB_FUSBH200_HCD=m CONFIG_USB_FOTG210_HCD=m +CONFIG_USB_MAX3421_HCD=m CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_HCD_PCI=m CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_U132_HCD=m @@ -5651,16 +5734,21 @@ CONFIG_USB_DWC3_DUAL_ROLE=y # # Platform Glue Driver Support # -CONFIG_USB_DWC3_OMAP=m -CONFIG_USB_DWC3_EXYNOS=m CONFIG_USB_DWC3_PCI=m -CONFIG_USB_DWC3_KEYSTONE=m # # Debugging features # # CONFIG_USB_DWC3_DEBUG is not set -CONFIG_USB_DWC2=m +CONFIG_USB_DWC2=y +CONFIG_USB_DWC2_HOST=m +CONFIG_USB_DWC2_PLATFORM=y +CONFIG_USB_DWC2_PCI=y + +# +# Gadget mode requires USB Gadget support to be enabled +# +CONFIG_USB_DWC2_PERIPHERAL=m # CONFIG_USB_DWC2_DEBUG is not set # CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set CONFIG_USB_CHIPIDEA=m @@ -5777,7 +5865,6 @@ CONFIG_USB_XUSBATM=m # USB Physical Layer drivers # CONFIG_USB_PHY=y -CONFIG_USB_OTG_FSM=m CONFIG_NOP_USB_XCEIV=m CONFIG_SAMSUNG_USBPHY=m CONFIG_SAMSUNG_USB2PHY=m @@ -5786,7 +5873,6 @@ CONFIG_USB_GPIO_VBUS=m CONFIG_TAHVO_USB=m CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y CONFIG_USB_ISP1301=m -CONFIG_USB_RCAR_PHY=m CONFIG_USB_GADGET=m # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -5802,7 +5888,6 @@ CONFIG_USB_GR_UDC=m CONFIG_USB_R8A66597=m CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_PXA27X=m -CONFIG_USB_S3C_HSOTG=m CONFIG_USB_MV_UDC=m CONFIG_USB_MV_U3D=m # CONFIG_USB_M66592 is not set @@ -5902,7 +5987,9 @@ CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m CONFIG_MMC_VUB300=m CONFIG_MMC_USHC=m +CONFIG_MMC_USDHI6ROL0=m CONFIG_MMC_REALTEK_PCI=m +CONFIG_MMC_REALTEK_USB=m CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set @@ -5920,6 +6007,7 @@ CONFIG_MEMSTICK_TIFM_MS=m CONFIG_MEMSTICK_JMICRON_38X=m CONFIG_MEMSTICK_R592=m CONFIG_MEMSTICK_REALTEK_PCI=m +CONFIG_MEMSTICK_REALTEK_USB=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -5927,7 +6015,6 @@ CONFIG_LEDS_CLASS=y # LED drivers # CONFIG_LEDS_88PM860X=m -CONFIG_LEDS_ATMEL_PWM=m CONFIG_LEDS_LM3530=m CONFIG_LEDS_LM3533=m CONFIG_LEDS_LM3642=m @@ -5946,7 +6033,6 @@ CONFIG_LEDS_LP8788=m CONFIG_LEDS_CLEVO_MAIL=m CONFIG_LEDS_PCA955X=m CONFIG_LEDS_PCA963X=m -CONFIG_LEDS_PCA9685=m CONFIG_LEDS_WM831X_STATUS=m CONFIG_LEDS_WM8350=m CONFIG_LEDS_DA903X=m @@ -5964,6 +6050,10 @@ CONFIG_LEDS_TCA6507=m CONFIG_LEDS_MAX8997=m CONFIG_LEDS_LM355x=m CONFIG_LEDS_OT200=m + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# CONFIG_LEDS_BLINKM=m # @@ -6010,7 +6100,7 @@ CONFIG_INFINIBAND_SRPT=m CONFIG_INFINIBAND_ISER=m CONFIG_INFINIBAND_ISERT=m CONFIG_EDAC=y -CONFIG_EDAC_LEGACY_SYSFS=y +# CONFIG_EDAC_LEGACY_SYSFS is not set # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_DECODE_MCE=m CONFIG_EDAC_MCE_INJ=m @@ -6075,6 +6165,7 @@ CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_TWL4030=m CONFIG_RTC_DRV_TPS6586X=m CONFIG_RTC_DRV_TPS65910=m CONFIG_RTC_DRV_TPS80031=m @@ -6093,6 +6184,7 @@ CONFIG_RTC_DRV_S5M=m CONFIG_RTC_DRV_M41T93=m CONFIG_RTC_DRV_M41T94=m CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1343=m CONFIG_RTC_DRV_DS1347=m CONFIG_RTC_DRV_DS1390=m CONFIG_RTC_DRV_MAX6902=m @@ -6101,6 +6193,7 @@ CONFIG_RTC_DRV_RS5C348=m CONFIG_RTC_DRV_DS3234=m CONFIG_RTC_DRV_PCF2123=m CONFIG_RTC_DRV_RX4581=m +CONFIG_RTC_DRV_MCP795=m # # Platform RTC drivers @@ -6113,6 +6206,7 @@ CONFIG_RTC_DRV_DS1553=m CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_DA9052=m CONFIG_RTC_DRV_DA9055=m +CONFIG_RTC_DRV_DA9063=m CONFIG_RTC_DRV_STK17TA8=m CONFIG_RTC_DRV_M48T86=m CONFIG_RTC_DRV_M48T35=m @@ -6133,6 +6227,7 @@ CONFIG_RTC_DRV_AB3100=m CONFIG_RTC_DRV_PCAP=m CONFIG_RTC_DRV_MC13XXX=m CONFIG_RTC_DRV_MOXART=m +CONFIG_RTC_DRV_XGENE=m # # HID Sensor RTC drivers @@ -6379,15 +6474,13 @@ CONFIG_R8712U=m CONFIG_R8188EU=m CONFIG_88EU_AP_MODE=y CONFIG_88EU_P2P=y +CONFIG_R8192EE=m CONFIG_R8723AU=m CONFIG_8723AU_AP_MODE=y -CONFIG_8723AU_P2P=y CONFIG_8723AU_BT_COEXIST=y CONFIG_R8821AE=m -CONFIG_RTS5139=m -# CONFIG_RTS5139_DEBUG is not set CONFIG_RTS5208=m -CONFIG_RTS5208_DEBUG=y +# CONFIG_RTS5208_DEBUG is not set CONFIG_TRANZPORT=m CONFIG_IDE_PHISON=m CONFIG_LINE6_USB=m @@ -6420,8 +6513,6 @@ CONFIG_AD7291=m CONFIG_AD7606=m CONFIG_AD7606_IFACE_PARALLEL=m CONFIG_AD7606_IFACE_SPI=m -CONFIG_AD799X=m -CONFIG_AD799X_RING_BUFFER=y CONFIG_AD7780=m CONFIG_AD7816=m CONFIG_AD7192=m @@ -6507,7 +6598,6 @@ CONFIG_CXT1E1=m CONFIG_SBE_PMCC4_NCOMM=y CONFIG_FB_XGI=m CONFIG_ACPI_QUICKSTART=m -CONFIG_SBE_2T3E3=m CONFIG_USB_ENESTORAGE=m CONFIG_BCM_WIMAX=m CONFIG_FT1000=m @@ -6548,8 +6638,7 @@ CONFIG_VIDEO_GO7007_LOADER=m CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m CONFIG_USB_MSI3101=m CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_VIDEO_V4L2_INT_DEVICE=m -CONFIG_VIDEO_TCM825X=m +# CONFIG_VIDEO_TCM825X is not set # CONFIG_USB_SN9C102 is not set CONFIG_SOLO6X10=m CONFIG_DVB_RTL2832_SDR=m @@ -6608,6 +6697,7 @@ CONFIG_ASUS_LAPTOP=m CONFIG_DELL_LAPTOP=m CONFIG_DELL_WMI=m CONFIG_DELL_WMI_AIO=m +CONFIG_DELL_SMO8800=m CONFIG_FUJITSU_LAPTOP=m # CONFIG_FUJITSU_LAPTOP_DEBUG is not set CONFIG_FUJITSU_TABLET=m @@ -6648,7 +6738,6 @@ CONFIG_INTEL_MID_POWER_BUTTON=m CONFIG_INTEL_MFLD_THERMAL=m CONFIG_INTEL_IPS=m CONFIG_IBM_RTL=m -CONFIG_XO15_EBOOK=m CONFIG_SAMSUNG_LAPTOP=m CONFIG_MXM_WMI=m CONFIG_INTEL_OAKTRAIL=m @@ -6660,6 +6749,10 @@ CONFIG_PVPANIC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m CONFIG_CHROMEOS_PSTORE=m + +# +# SOC (System On Chip) specific Drivers +# CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y @@ -6745,6 +6838,7 @@ CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m CONFIG_KXSD9=m +CONFIG_MMA8452=m # # Analog to digital converters @@ -6757,6 +6851,7 @@ CONFIG_AD7791=m CONFIG_AD7793=m CONFIG_AD7887=m CONFIG_AD7923=m +CONFIG_AD799X=m CONFIG_LP8788_ADC=m CONFIG_MAX1363=m CONFIG_MCP320X=m @@ -6765,6 +6860,8 @@ CONFIG_MEN_Z188_ADC=m CONFIG_NAU7802=m CONFIG_TI_ADC081C=m CONFIG_TI_AM335X_ADC=m +CONFIG_TWL4030_MADC=m +CONFIG_TWL6030_GPADC=m CONFIG_VIPERBOARD_ADC=m # @@ -6874,6 +6971,7 @@ CONFIG_IIO_ST_MAGN_SPI_3AXIS=m # Inclinometer sensors # CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m # # Triggers - standalone @@ -6885,14 +6983,21 @@ CONFIG_IIO_SYSFS_TRIGGER=m # Pressure sensors # CONFIG_HID_SENSOR_PRESS=m +CONFIG_MPL115=m CONFIG_MPL3115=m CONFIG_IIO_ST_PRESS=m CONFIG_IIO_ST_PRESS_I2C=m CONFIG_IIO_ST_PRESS_SPI=m # +# Lightning sensors +# +CONFIG_AS3935=m + +# # Temperature sensors # +CONFIG_MLX90614=m CONFIG_TMP006=m CONFIG_NTB=m CONFIG_VME_BUS=y @@ -6917,6 +7022,8 @@ CONFIG_PWM=y CONFIG_PWM_SYSFS=y CONFIG_PWM_LP3943=m CONFIG_PWM_LPSS=m +CONFIG_PWM_TWL=m +CONFIG_PWM_TWL_LED=m CONFIG_IPACK_BUS=m CONFIG_BOARD_TPCI200=m CONFIG_SERIAL_IPOCTAL=m @@ -7095,7 +7202,9 @@ CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y @@ -7220,9 +7329,9 @@ CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set -# CONFIG_AFS_FSCACHE is not set +CONFIG_AFS_FSCACHE=y CONFIG_9P_FS=m -# CONFIG_9P_FSCACHE is not set +CONFIG_9P_FSCACHE=y CONFIG_9P_FS_POSIX_ACL=y CONFIG_9P_FS_SECURITY=y CONFIG_NLS=y @@ -7296,7 +7405,6 @@ CONFIG_DYNAMIC_DEBUG=y # Compile-time checks and compiler options # # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_INFO_REDUCED is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 @@ -7372,6 +7480,7 @@ CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set @@ -7390,7 +7499,7 @@ CONFIG_NOTIFIER_ERROR_INJECTION=m CONFIG_CPU_NOTIFIER_ERROR_INJECT=m CONFIG_PM_NOTIFIER_ERROR_INJECT=m # CONFIG_FAULT_INJECTION is not set -CONFIG_LATENCYTOP=y +# CONFIG_LATENCYTOP is not set CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set CONFIG_USER_STACKTRACE_SUPPORT=y @@ -7436,6 +7545,7 @@ CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set CONFIG_MMIOTRACE=y # CONFIG_MMIOTRACE_TEST is not set +# CONFIG_TRACEPOINT_BENCHMARK is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_RING_BUFFER_STARTUP_TEST is not set @@ -7457,6 +7567,7 @@ CONFIG_TEST_KSTRTOX=m # CONFIG_DMA_API_DEBUG is not set CONFIG_TEST_MODULE=m CONFIG_TEST_USER_COPY=m +CONFIG_TEST_BPF=m # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y @@ -7505,7 +7616,7 @@ CONFIG_PERSISTENT_KEYRINGS=y CONFIG_BIG_KEYS=y CONFIG_TRUSTED_KEYS=y CONFIG_ENCRYPTED_KEYS=y -# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y @@ -7552,7 +7663,12 @@ CONFIG_IMA_DEFAULT_HASH_SHA1=y CONFIG_IMA_DEFAULT_HASH="sha1" CONFIG_IMA_APPRAISE=y CONFIG_EVM=y -CONFIG_EVM_HMAC_VERSION=2 + +# +# EVM options +# +CONFIG_EVM_ATTR_FSUUID=y +CONFIG_EVM_EXTRA_SMACK_XATTRS=y # CONFIG_DEFAULT_SECURITY_SELINUX is not set # CONFIG_DEFAULT_SECURITY_SMACK is not set # CONFIG_DEFAULT_SECURITY_TOMOYO is not set @@ -7783,6 +7899,8 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_INTERVAL_TREE=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y diff --git a/gnu/packages/linux-libre-x86_64.conf b/gnu/packages/linux-libre-x86_64.conf index 9868074691..2549c9a6ec 100644 --- a/gnu/packages/linux-libre-x86_64.conf +++ b/gnu/packages/linux-libre-x86_64.conf @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 3.15.3-gnu Kernel Configuration +# Linux/x86 3.16.0 Kernel Configuration # CONFIG_64BIT=y CONFIG_X86_64=y @@ -39,6 +39,7 @@ CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_FIX_EARLYCON_MEM=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y @@ -69,6 +70,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_FHANDLE=y CONFIG_USELIB=y CONFIG_AUDIT=y @@ -82,6 +84,7 @@ CONFIG_AUDIT_TREE=y # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y @@ -131,7 +134,7 @@ CONFIG_TREE_RCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_CONTEXT_TRACKING=y CONFIG_RCU_USER_QS=y -CONFIG_CONTEXT_TRACKING_FORCE=y +# CONFIG_CONTEXT_TRACKING_FORCE is not set CONFIG_RCU_FANOUT=64 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set @@ -165,7 +168,7 @@ CONFIG_CGROUP_PERF=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y -CONFIG_RT_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set CONFIG_CHECKPOINT_RESTORE=y @@ -176,7 +179,6 @@ CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_SCHED_AUTOGROUP=y -CONFIG_MM_OWNER=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y @@ -195,6 +197,7 @@ CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_EXPERT=y CONFIG_UID16=y +CONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -251,6 +254,7 @@ CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_CLK=y @@ -313,11 +317,11 @@ CONFIG_BLK_CMDLINE_PARSER=y # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y -# CONFIG_ACORN_PARTITION_CUMANA is not set -# CONFIG_ACORN_PARTITION_EESOX is not set +CONFIG_ACORN_PARTITION_CUMANA=y +CONFIG_ACORN_PARTITION_EESOX=y CONFIG_ACORN_PARTITION_ICS=y -# CONFIG_ACORN_PARTITION_ADFS is not set -# CONFIG_ACORN_PARTITION_POWERTEC is not set +CONFIG_ACORN_PARTITION_ADFS=y +CONFIG_ACORN_PARTITION_POWERTEC=y CONFIG_ACORN_PARTITION_RISCIX=y CONFIG_AIX_PARTITION=y CONFIG_OSF_PARTITION=y @@ -360,7 +364,11 @@ CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_ARCH_USE_QUEUE_RWLOCK=y +CONFIG_QUEUE_RWLOCK=y CONFIG_FREEZER=y # @@ -374,6 +382,7 @@ CONFIG_X86_EXTENDED_PLATFORM=y CONFIG_X86_NUMACHIP=y # CONFIG_X86_VSMP is not set # CONFIG_X86_UV is not set +# CONFIG_X86_GOLDFISH is not set CONFIG_X86_INTEL_LPSS=y CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y @@ -422,8 +431,8 @@ CONFIG_IOMMU_HELPER=y CONFIG_NR_CPUS=256 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y @@ -434,13 +443,16 @@ CONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=m CONFIG_X86_THERMAL_VECTOR=y +CONFIG_X86_16BIT=y +CONFIG_X86_ESPFIX64=y CONFIG_I8K=m -CONFIG_MICROCODE=m +CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y -# CONFIG_MICROCODE_INTEL_EARLY is not set -# CONFIG_MICROCODE_AMD_EARLY is not set +CONFIG_MICROCODE_INTEL_EARLY=y +CONFIG_MICROCODE_AMD_EARLY=y +CONFIG_MICROCODE_EARLY=y CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_ARCH_PHYS_ADDR_T_64BIT=y @@ -496,7 +508,6 @@ CONFIG_HWPOISON_INJECT=m CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_CLEANCACHE=y CONFIG_FRONTSWAP=y CONFIG_CMA=y @@ -533,6 +544,9 @@ CONFIG_CRASH_DUMP=y CONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y +CONFIG_RANDOMIZE_BASE=y +CONFIG_RANDOMIZE_BASE_MAX_OFFSET=0x40000000 +CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set @@ -555,7 +569,9 @@ CONFIG_PM_STD_PARTITION="" CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y # CONFIG_PM_AUTOSLEEP is not set -# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM_WAKELOCKS=y +CONFIG_PM_WAKELOCKS_LIMIT=100 +CONFIG_PM_WAKELOCKS_GC=y CONFIG_PM_RUNTIME=y CONFIG_PM=y CONFIG_PM_DEBUG=y @@ -754,6 +770,7 @@ CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_KEYS_COMPAT=y CONFIG_X86_DEV_DMA_OPS=y +CONFIG_IOSF_MBI=m CONFIG_NET=y CONFIG_COMPAT_NETLINK_MESSAGES=y @@ -948,7 +965,7 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NETMAP=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_REDIRECT=m CONFIG_NETFILTER_XT_TARGET_TEE=m @@ -1024,7 +1041,7 @@ CONFIG_IP_SET_HASH_NETPORT=m CONFIG_IP_SET_HASH_NETIFACE=m CONFIG_IP_SET_LIST_SET=m CONFIG_IP_VS=m -# CONFIG_IP_VS_IPV6 is not set +CONFIG_IP_VS_IPV6=y # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 @@ -1136,6 +1153,7 @@ CONFIG_IP6_NF_TARGET_NPT=m # CONFIG_DECNET_NF_GRABULATOR=m CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NFT_BRIDGE_META=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -1365,9 +1383,7 @@ CONFIG_CAN_SLCAN=m CONFIG_CAN_DEV=m CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_LEDS=y -CONFIG_CAN_MCP251X=m CONFIG_CAN_JANZ_ICAN3=m -CONFIG_PCH_CAN=m CONFIG_CAN_SJA1000=m CONFIG_CAN_SJA1000_ISA=m CONFIG_CAN_SJA1000_PLATFORM=m @@ -1386,10 +1402,16 @@ CONFIG_CAN_CC770_ISA=m CONFIG_CAN_CC770_PLATFORM=m # +# CAN SPI interfaces +# +CONFIG_CAN_MCP251X=m + +# # CAN USB interfaces # CONFIG_CAN_EMS_USB=m CONFIG_CAN_ESD_USB2=m +CONFIG_CAN_GS_USB=m CONFIG_CAN_KVASER_USB=m CONFIG_CAN_PEAK_USB=m CONFIG_CAN_8DEV_USB=m @@ -1496,7 +1518,7 @@ CONFIG_WEXT_PROC=y CONFIG_WEXT_SPY=y CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m -CONFIG_NL80211_TESTMODE=y +# CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set @@ -1564,6 +1586,8 @@ CONFIG_NFC_MICROREAD_I2C=m CONFIG_NFC_MICROREAD_MEI=m CONFIG_NFC_MRVL=m CONFIG_NFC_MRVL_USB=m +CONFIG_NFC_ST21NFCA=m +CONFIG_NFC_ST21NFCA_I2C=m CONFIG_HAVE_BPF_JIT=y # @@ -1573,6 +1597,7 @@ CONFIG_HAVE_BPF_JIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -1593,6 +1618,18 @@ CONFIG_REGMAP_SPI=y CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_DMA_SHARED_BUFFER=y +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=64 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +CONFIG_CMA_AREAS=7 # # Bus devices @@ -1655,8 +1692,6 @@ CONFIG_MTD_ABSENT=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=m # CONFIG_MTD_PHYSMAP_COMPAT is not set -CONFIG_MTD_SC520CDP=m -CONFIG_MTD_NETSC520=m CONFIG_MTD_SBC_GXX=m CONFIG_MTD_AMD76XROM=m CONFIG_MTD_ICHXROM=m @@ -1725,18 +1760,19 @@ CONFIG_MTD_ONENAND_GENERIC=m CONFIG_MTD_ONENAND_2X_PROGRAM=y # -# LPDDR flash memory drivers +# LPDDR & LPDDR2 PCM memory drivers # CONFIG_MTD_LPDDR=m CONFIG_MTD_QINFO_PROBE=m +CONFIG_MTD_SPI_NOR=m CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_GLUEBI=m CONFIG_MTD_UBI_BLOCK=y -CONFIG_PARPORT=m CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m CONFIG_PARPORT_PC_FIFO=y @@ -1826,7 +1862,6 @@ CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m CONFIG_AD525X_DPOT_SPI=m -CONFIG_ATMEL_PWM=m CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m @@ -1834,7 +1869,6 @@ CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m -CONFIG_ATMEL_SSC=m CONFIG_ENCLOSURE_SERVICES=m # CONFIG_CS5535_MFGPT is not set CONFIG_HP_ILO=m @@ -1852,7 +1886,6 @@ CONFIG_VMWARE_BALLOON=m CONFIG_BMP085=y CONFIG_BMP085_I2C=m CONFIG_BMP085_SPI=m -CONFIG_PCH_PHUB=m CONFIG_USB_SWITCH_FSA9480=m CONFIG_LATTICE_ECP3_CONFIG=m CONFIG_SRAM=y @@ -1931,7 +1964,7 @@ CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # -CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m @@ -1957,7 +1990,7 @@ CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +CONFIG_AIC7XXX_RESET_DELAY_MS=5000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y @@ -2022,10 +2055,11 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_IPR=m -# CONFIG_SCSI_IPR_TRACE is not set -# CONFIG_SCSI_IPR_DUMP is not set +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLA_FC=m +CONFIG_TCM_QLA2XXX=m CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_LPFC_DEBUG_FS is not set @@ -2230,7 +2264,12 @@ CONFIG_DUMMY=m CONFIG_EQUALIZER=m CONFIG_NET_FC=y CONFIG_IFB=m -# CONFIG_NET_TEAM is not set +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m CONFIG_VXLAN=m @@ -2418,7 +2457,7 @@ CONFIG_MLX4_EN=m CONFIG_MLX4_EN_DCB=y CONFIG_MLX4_EN_VXLAN=y CONFIG_MLX4_CORE=m -# CONFIG_MLX4_DEBUG is not set +CONFIG_MLX4_DEBUG=y CONFIG_MLX5_CORE=m CONFIG_NET_VENDOR_MICREL=y CONFIG_KS8842=m @@ -2442,7 +2481,6 @@ CONFIG_PCMCIA_PCNET=m CONFIG_NET_VENDOR_NVIDIA=y CONFIG_FORCEDETH=m CONFIG_NET_VENDOR_OKI=y -CONFIG_PCH_GBE=m CONFIG_ETHOC=m CONFIG_NET_PACKET_ENGINE=y CONFIG_HAMACHI=m @@ -2453,6 +2491,7 @@ CONFIG_QLCNIC=m CONFIG_QLCNIC_SRIOV=y CONFIG_QLCNIC_DCB=y CONFIG_QLCNIC_VXLAN=y +CONFIG_QLCNIC_HWMON=y CONFIG_QLGE=m CONFIG_NETXEN_NIC=m CONFIG_NET_VENDOR_REALTEK=y @@ -2523,27 +2562,27 @@ CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_AT803X_PHY=y -CONFIG_AMD_PHY=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y +CONFIG_AT803X_PHY=m +CONFIG_AMD_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m CONFIG_BCM7XXX_PHY=m -CONFIG_BCM87XX_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_MICREL_PHY=y +CONFIG_BCM87XX_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MICREL_PHY=m CONFIG_FIXED_PHY=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_GPIO=y +CONFIG_MDIO_BITBANG=m +CONFIG_MDIO_GPIO=m CONFIG_MICREL_KS8995MA=m CONFIG_PLIP=m CONFIG_PPP=y @@ -2671,6 +2710,9 @@ CONFIG_WCN36XX=m CONFIG_B43=m CONFIG_B43_BCMA=y CONFIG_B43_SSB=y +CONFIG_B43_BUSES_BCMA_AND_SSB=y +# CONFIG_B43_BUSES_BCMA is not set +# CONFIG_B43_BUSES_SSB is not set CONFIG_B43_PCI_AUTOSELECT=y CONFIG_B43_PCICORE_AUTOSELECT=y # CONFIG_B43_PCMCIA is not set @@ -2719,6 +2761,7 @@ CONFIG_IPW2200_QOS=y CONFIG_LIBIPW=m # CONFIG_LIBIPW_DEBUG is not set CONFIG_IWLWIFI=m +CONFIG_IWLWIFI_LEDS=y CONFIG_IWLDVM=m CONFIG_IWLMVM=m CONFIG_IWLWIFI_OPMODE_MODULAR=y @@ -2825,7 +2868,7 @@ CONFIG_CW1200=m CONFIG_CW1200_WLAN_SDIO=m CONFIG_CW1200_WLAN_SPI=m CONFIG_RSI_91X=m -CONFIG_RSI_DEBUGFS=y +# CONFIG_RSI_DEBUGFS is not set CONFIG_RSI_SDIO=m CONFIG_RSI_USB=m @@ -2946,11 +2989,11 @@ CONFIG_HISAX_FRITZ_PCIPNP=m # Active cards # CONFIG_ISDN_CAPI=m -CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_CAPI_TRACE=y CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPIDRV=m +# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set # # CAPI hardware drivers @@ -3044,8 +3087,8 @@ CONFIG_KEYBOARD_OPENCORES=m CONFIG_KEYBOARD_SAMSUNG=m CONFIG_KEYBOARD_STOWAWAY=m CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_STMPE=m CONFIG_KEYBOARD_TC3589X=m +CONFIG_KEYBOARD_TWL4030=m CONFIG_KEYBOARD_XTKBD=m CONFIG_KEYBOARD_CROS_EC=m CONFIG_INPUT_MOUSE=y @@ -3175,10 +3218,8 @@ CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC2005=m CONFIG_TOUCHSCREEN_TSC2007=m -CONFIG_TOUCHSCREEN_W90X900=m CONFIG_TOUCHSCREEN_PCAP=m CONFIG_TOUCHSCREEN_ST1232=m -CONFIG_TOUCHSCREEN_STMPE=m CONFIG_TOUCHSCREEN_SUR40=m CONFIG_TOUCHSCREEN_TPS6507X=m CONFIG_TOUCHSCREEN_ZFORCE=m @@ -3198,6 +3239,7 @@ CONFIG_INPUT_MMA8450=m CONFIG_INPUT_MPU3050=m CONFIG_INPUT_APANEL=m CONFIG_INPUT_GP2A=m +CONFIG_INPUT_GPIO_BEEPER=m CONFIG_INPUT_GPIO_TILT_POLLED=m CONFIG_INPUT_ATLAS_BTNS=m CONFIG_INPUT_ATI_REMOTE2=m @@ -3208,6 +3250,8 @@ CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_RETU_PWRBUTTON=m +CONFIG_INPUT_TWL4030_PWRBUTTON=m +CONFIG_INPUT_TWL4030_VIBRA=m CONFIG_INPUT_TWL6040_VIBRA=m CONFIG_INPUT_UINPUT=y CONFIG_INPUT_PCF50633_PMU=m @@ -3284,11 +3328,11 @@ CONFIG_TRACE_SINK=m # # Serial drivers # +CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_CS=m @@ -3316,17 +3360,18 @@ CONFIG_CONSOLE_POLL=y CONFIG_SERIAL_JSM=m CONFIG_SERIAL_SCCNXP=y CONFIG_SERIAL_SCCNXP_CONSOLE=y +CONFIG_SERIAL_SC16IS7XX=m CONFIG_SERIAL_ALTERA_JTAGUART=m CONFIG_SERIAL_ALTERA_UART=m CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 # CONFIG_SERIAL_IFX6X60 is not set -CONFIG_SERIAL_PCH_UART=m CONFIG_SERIAL_ARC=m CONFIG_SERIAL_ARC_NR_PORTS=1 CONFIG_SERIAL_RP2=m CONFIG_SERIAL_RP2_NR_UARTS=32 CONFIG_SERIAL_FSL_LPUART=m +CONFIG_SERIAL_MEN_Z135=m CONFIG_TTY_PRINTK=y CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set @@ -3347,10 +3392,8 @@ CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m -# CONFIG_HW_RANDOM_ATMEL is not set CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_HW_RANDOM_EXYNOS=m CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=m CONFIG_R3964=m @@ -3437,7 +3480,6 @@ CONFIG_I2C_CBUS_GPIO=m CONFIG_I2C_DESIGNWARE_CORE=m CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=m -CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m CONFIG_I2C_KEMPLD=m CONFIG_I2C_OCORES=m @@ -3460,6 +3502,7 @@ CONFIG_I2C_VIPERBOARD=m # # Other I2C/SMBus bus drivers # +CONFIG_I2C_CROS_EC_TUNNEL=m CONFIG_I2C_STUB=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -3481,7 +3524,6 @@ CONFIG_SPI_PXA2XX_DMA=y CONFIG_SPI_PXA2XX=m CONFIG_SPI_PXA2XX_PCI=m CONFIG_SPI_SC18IS602=m -CONFIG_SPI_TOPCLIFF_PCH=m CONFIG_SPI_XCOMM=m # CONFIG_SPI_XILINX is not set CONFIG_SPI_DESIGNWARE=m @@ -3499,6 +3541,10 @@ CONFIG_HSI=m CONFIG_HSI_BOARDINFO=y # +# HSI controllers +# + +# # HSI clients # CONFIG_HSI_CHAR=m @@ -3529,7 +3575,6 @@ CONFIG_PTP_1588_CLOCK=m # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # -CONFIG_PTP_1588_CLOCK_PCH=m CONFIG_PINCTRL=y # @@ -3543,8 +3588,9 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y # CONFIG_DEBUG_GPIO is not set -# CONFIG_GPIO_SYSFS is not set +CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC=m CONFIG_GPIO_DA9052=m CONFIG_GPIO_DA9055=m @@ -3573,9 +3619,9 @@ CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m CONFIG_GPIO_RC5T583=y CONFIG_GPIO_SX150X=y -CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y CONFIG_GPIO_TPS65912=m +CONFIG_GPIO_TWL4030=m CONFIG_GPIO_TWL6040=m CONFIG_GPIO_WM831X=m CONFIG_GPIO_WM8350=m @@ -3589,7 +3635,6 @@ CONFIG_GPIO_ADP5588=m CONFIG_GPIO_CS5535=m CONFIG_GPIO_AMD8111=m CONFIG_GPIO_INTEL_MID=y -CONFIG_GPIO_PCH=m CONFIG_GPIO_ML_IOH=m CONFIG_GPIO_TIMBERDALE=y CONFIG_GPIO_RDC321X=m @@ -3673,10 +3718,13 @@ CONFIG_BATTERY_DA9030=m CONFIG_BATTERY_DA9052=m CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m +CONFIG_BATTERY_TWL4030_MADC=m CONFIG_CHARGER_88PM860X=m CONFIG_CHARGER_PCF50633=m +CONFIG_BATTERY_RX51=m CONFIG_CHARGER_ISP1704=m CONFIG_CHARGER_MAX8903=m +CONFIG_CHARGER_TWL4030=m CONFIG_CHARGER_LP8727=m CONFIG_CHARGER_LP8788=m CONFIG_CHARGER_GPIO=m @@ -3784,6 +3832,7 @@ CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_SENSORS_NCT6683=m CONFIG_SENSORS_NCT6775=m CONFIG_SENSORS_PCF8591=m CONFIG_PMBUS=m @@ -3799,6 +3848,7 @@ CONFIG_SENSORS_UCD9200=m CONFIG_SENSORS_ZL6100=m CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SHTC1=m CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_DME1737=m CONFIG_SENSORS_EMC1403=m @@ -3822,6 +3872,7 @@ CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP102=m CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_TWL4030_MADC=m CONFIG_SENSORS_VIA_CPUTEMP=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m @@ -3856,6 +3907,7 @@ CONFIG_THERMAL_EMULATION=y CONFIG_INTEL_POWERCLAMP=m CONFIG_X86_PKG_TEMP_THERMAL=m CONFIG_ACPI_INT3403_THERMAL=m +CONFIG_INTEL_SOC_DTS_THERMAL=m # # Texas Instruments thermal drivers @@ -3874,6 +3926,7 @@ CONFIG_WM831X_WATCHDOG=m CONFIG_WM8350_WATCHDOG=m CONFIG_XILINX_WATCHDOG=m CONFIG_DW_WATCHDOG=m +CONFIG_TWL4030_WATCHDOG=m CONFIG_RETU_WATCHDOG=m CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m @@ -3899,14 +3952,11 @@ CONFIG_SC1200_WDT=m CONFIG_PC87413_WDT=m CONFIG_NV_TCO=m CONFIG_60XX_WDT=m -CONFIG_SBC8360_WDT=m CONFIG_CPU5_WDT=m CONFIG_SMSC_SCH311X_WDT=m CONFIG_SMSC37B787_WDT=m CONFIG_VIA_WDT=m CONFIG_W83627HF_WDT=m -CONFIG_W83697HF_WDT=m -CONFIG_W83697UG_WDT=m CONFIG_W83877F_WDT=m CONFIG_W83977F_WDT=m CONFIG_MACHZ_WDT=m @@ -3967,6 +4017,7 @@ CONFIG_MFD_AS3711=y CONFIG_PMIC_ADP5520=y CONFIG_MFD_AAT2870_CORE=y CONFIG_MFD_BCM590XX=m +CONFIG_MFD_AXP20X=y CONFIG_MFD_CROS_EC=m CONFIG_MFD_CROS_EC_I2C=m CONFIG_PMIC_DA903X=y @@ -4008,18 +4059,11 @@ CONFIG_MFD_RC5T583=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_SI476X_CORE=m CONFIG_MFD_SM501=m -# CONFIG_MFD_SM501_GPIO is not set +CONFIG_MFD_SM501_GPIO=y CONFIG_MFD_SMSC=y CONFIG_ABX500_CORE=y CONFIG_AB3100_CORE=y CONFIG_AB3100_OTP=m -CONFIG_MFD_STMPE=y - -# -# STMicroelectronics STMPE Interface Drivers -# -CONFIG_STMPE_I2C=y -CONFIG_STMPE_SPI=y CONFIG_MFD_SYSCON=y CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_LP3943=m @@ -4037,7 +4081,8 @@ CONFIG_MFD_TPS65912=y CONFIG_MFD_TPS65912_I2C=y CONFIG_MFD_TPS65912_SPI=y CONFIG_MFD_TPS80031=y -# CONFIG_TWL4030_CORE is not set +CONFIG_TWL4030_CORE=y +CONFIG_MFD_TWL4030_AUDIO=y CONFIG_TWL6040_CORE=y CONFIG_MFD_WL1273_CORE=m CONFIG_MFD_LM3533=m @@ -4064,7 +4109,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=m CONFIG_REGULATOR_VIRTUAL_CONSUMER=m CONFIG_REGULATOR_USERSPACE_CONSUMER=m CONFIG_REGULATOR_88PM800=m -CONFIG_REGULATOR_88PM8607=y +CONFIG_REGULATOR_88PM8607=m CONFIG_REGULATOR_ACT8865=m CONFIG_REGULATOR_AD5398=m CONFIG_REGULATOR_ANATOP=m @@ -4072,6 +4117,7 @@ CONFIG_REGULATOR_AAT2870=m CONFIG_REGULATOR_AB3100=m CONFIG_REGULATOR_ARIZONA=m CONFIG_REGULATOR_AS3711=m +CONFIG_REGULATOR_AXP20X=m CONFIG_REGULATOR_BCM590XX=m CONFIG_REGULATOR_DA903X=m CONFIG_REGULATOR_DA9052=m @@ -4083,9 +4129,10 @@ CONFIG_REGULATOR_GPIO=m CONFIG_REGULATOR_ISL6271A=m CONFIG_REGULATOR_LP3971=m CONFIG_REGULATOR_LP3972=m -CONFIG_REGULATOR_LP872X=y +CONFIG_REGULATOR_LP872X=m CONFIG_REGULATOR_LP8755=m -CONFIG_REGULATOR_LP8788=y +CONFIG_REGULATOR_LP8788=m +CONFIG_REGULATOR_LTC3589=m CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX1586=m CONFIG_REGULATOR_MAX8649=m @@ -4107,7 +4154,7 @@ CONFIG_REGULATOR_PCF50633=m CONFIG_REGULATOR_PFUZE100=m CONFIG_REGULATOR_RC5T583=m CONFIG_REGULATOR_S2MPA01=m -# CONFIG_REGULATOR_S2MPS11 is not set +CONFIG_REGULATOR_S2MPS11=m CONFIG_REGULATOR_S5M8767=m CONFIG_REGULATOR_TPS51632=m CONFIG_REGULATOR_TPS6105X=m @@ -4121,6 +4168,7 @@ CONFIG_REGULATOR_TPS6586X=m CONFIG_REGULATOR_TPS65910=m CONFIG_REGULATOR_TPS65912=m CONFIG_REGULATOR_TPS80031=m +CONFIG_REGULATOR_TWL4030=m CONFIG_REGULATOR_WM831X=m CONFIG_REGULATOR_WM8350=m CONFIG_REGULATOR_WM8400=m @@ -4135,8 +4183,9 @@ CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_RADIO_SUPPORT=y CONFIG_MEDIA_RC_SUPPORT=y -# CONFIG_MEDIA_CONTROLLER is not set +CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=m # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set @@ -4152,6 +4201,7 @@ CONFIG_VIDEOBUF2_MEMOPS=m CONFIG_VIDEOBUF2_DMA_CONTIG=m CONFIG_VIDEOBUF2_VMALLOC=m CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_VIDEOBUF2_DVB=m CONFIG_DVB_CORE=m CONFIG_DVB_NET=y CONFIG_TTPCI_EEPROM=m @@ -4212,6 +4262,7 @@ CONFIG_USB_GL860=m CONFIG_USB_GSPCA_BENQ=m CONFIG_USB_GSPCA_CONEX=m CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_DTCS033=m CONFIG_USB_GSPCA_ETOMS=m CONFIG_USB_GSPCA_FINEPIX=m CONFIG_USB_GSPCA_JEILINJ=m @@ -4427,6 +4478,7 @@ CONFIG_VIDEO_SH_MOBILE_CEU=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m CONFIG_VIDEO_SH_VEU=m +CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVI=m CONFIG_VIDEO_MEM2MEM_TESTDEV=m @@ -4625,6 +4677,7 @@ CONFIG_MEDIA_TUNER_E4000=m CONFIG_MEDIA_TUNER_FC2580=m CONFIG_MEDIA_TUNER_M88TS2022=m CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m CONFIG_MEDIA_TUNER_IT913X=m CONFIG_MEDIA_TUNER_R820T=m @@ -4697,6 +4750,7 @@ CONFIG_DVB_STV0367=m CONFIG_DVB_CXD2820R=m CONFIG_DVB_RTL2830=m CONFIG_DVB_RTL2832=m +CONFIG_DVB_SI2168=m # # DVB-C (cable) frontends @@ -4787,10 +4841,11 @@ CONFIG_DRM_TTM=m CONFIG_DRM_I2C_CH7006=m CONFIG_DRM_I2C_SIL164=m CONFIG_DRM_I2C_NXP_TDA998X=m +CONFIG_DRM_PTN3460=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m -CONFIG_DRM_RADEON_UMS=y +# CONFIG_DRM_RADEON_UMS is not set CONFIG_DRM_NOUVEAU=m CONFIG_NOUVEAU_DEBUG=5 CONFIG_NOUVEAU_DEBUG_DEFAULT=3 @@ -4800,7 +4855,6 @@ CONFIG_DRM_I915=m CONFIG_DRM_I915_KMS=y CONFIG_DRM_I915_FBDEV=y CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT=y -# CONFIG_DRM_I915_UMS is not set CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m @@ -4816,7 +4870,6 @@ CONFIG_DRM_AST=m CONFIG_DRM_CIRRUS_QEMU=m CONFIG_DRM_QXL=m CONFIG_DRM_BOCHS=m -CONFIG_DRM_PTN3460=m # # Frame buffer Devices @@ -4871,7 +4924,7 @@ CONFIG_FB_LE80578=m CONFIG_FB_CARILLO_RANCH=m CONFIG_FB_INTEL=m # CONFIG_FB_INTEL_DEBUG is not set -# CONFIG_FB_INTEL_I2C is not set +CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y @@ -4892,7 +4945,7 @@ CONFIG_FB_ATY_BACKLIGHT=y CONFIG_FB_S3=m CONFIG_FB_S3_DDC=y CONFIG_FB_SAVAGE=m -# CONFIG_FB_SAVAGE_I2C is not set +CONFIG_FB_SAVAGE_I2C=y # CONFIG_FB_SAVAGE_ACCEL is not set CONFIG_FB_SIS=m CONFIG_FB_SIS_300=y @@ -4913,12 +4966,9 @@ CONFIG_FB_PM3=m CONFIG_FB_CARMINE=m CONFIG_FB_CARMINE_DRAM_EVAL=y # CONFIG_CARMINE_DRAM_CUSTOM is not set -CONFIG_FB_TMIO=m -CONFIG_FB_TMIO_ACCELL=y CONFIG_FB_SM501=m CONFIG_FB_SMSCUFX=m CONFIG_FB_UDL=m -CONFIG_FB_GOLDFISH=m # CONFIG_FB_VIRTUAL is not set CONFIG_XEN_FBDEV_FRONTEND=m CONFIG_FB_METRONOME=m @@ -4931,7 +4981,6 @@ CONFIG_FB_AUO_K1900=m CONFIG_FB_AUO_K1901=m CONFIG_FB_HYPERV=m CONFIG_FB_SIMPLE=y -CONFIG_EXYNOS_VIDEO=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m CONFIG_LCD_L4F00242T03=m @@ -4948,7 +4997,6 @@ CONFIG_LCD_AMS369FG06=m CONFIG_LCD_LMS501KF03=m CONFIG_LCD_HX8357=m CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_PWM=m CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_LM3533=m CONFIG_BACKLIGHT_CARILLO_RANCH=m @@ -4969,6 +5017,7 @@ CONFIG_BACKLIGHT_LM3630A=m CONFIG_BACKLIGHT_LM3639=m CONFIG_BACKLIGHT_LP855X=m CONFIG_BACKLIGHT_LP8788=m +CONFIG_BACKLIGHT_PANDORA=m CONFIG_BACKLIGHT_TPS65217=m CONFIG_BACKLIGHT_AS3711=m CONFIG_BACKLIGHT_GPIO=m @@ -4992,17 +5041,20 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_LIBRE_CLUT224=y CONFIG_SOUND=m -# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m +CONFIG_SND_DMAENGINE_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_COMPRESS_OFFLOAD=m CONFIG_SND_JACK=y CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_MIXER_OSS is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_SEQUENCER_OSS is not set CONFIG_SND_HRTIMER=m @@ -5012,9 +5064,7 @@ CONFIG_SND_MAX_CARDS=32 CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set -CONFIG_SND_DEBUG=y -# CONFIG_SND_DEBUG_VERBOSE is not set -CONFIG_SND_PCM_XRUN_DEBUG=y +# CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_KCTL_JACK=y CONFIG_SND_DMA_SGBUF=y @@ -5142,8 +5192,6 @@ CONFIG_SND_HDA_CODEC_SI3054=m CONFIG_SND_HDA_GENERIC=m CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 CONFIG_SND_SPI=y -CONFIG_SND_AT73C213=m -CONFIG_SND_AT73C213_TARGET_BITRATE=48000 CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_UA101=m @@ -5153,24 +5201,43 @@ CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_USB_US122L=m CONFIG_SND_USB_6FIRE=m CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m CONFIG_SND_FIREWIRE=y CONFIG_SND_FIREWIRE_LIB=m CONFIG_SND_DICE=m CONFIG_SND_FIREWIRE_SPEAKERS=m CONFIG_SND_ISIGHT=m CONFIG_SND_SCS1X=m +CONFIG_SND_FIREWORKS=m +CONFIG_SND_BEBOB=m CONFIG_SND_PCMCIA=y CONFIG_SND_VXPOCKET=m CONFIG_SND_PDAUDIOCF=m CONFIG_SND_SOC=m +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y CONFIG_SND_ATMEL_SOC=m CONFIG_SND_DESIGNWARE_I2S=m + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +CONFIG_SND_SOC_FSL_SAI=m +CONFIG_SND_SOC_FSL_SSI=m +CONFIG_SND_SOC_FSL_SPDIF=m +CONFIG_SND_SOC_FSL_ESAI=m +CONFIG_SND_SOC_FSL_UTILS=m +CONFIG_SND_SOC_IMX_AUDMUX=m CONFIG_SND_SOC_INTEL_SST=m CONFIG_SND_SOC_INTEL_SST_ACPI=m CONFIG_SND_SOC_INTEL_HASWELL=m CONFIG_SND_SOC_INTEL_BAYTRAIL=m CONFIG_SND_SOC_INTEL_HASWELL_MACH=m CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH=m +CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH=m CONFIG_SND_SOC_I2C_AND_SPI=m # @@ -5181,24 +5248,30 @@ CONFIG_SND_SOC_AK4104=m CONFIG_SND_SOC_AK4554=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_AK5386=m +CONFIG_SND_SOC_ALC5623=m CONFIG_SND_SOC_CS42L52=m +CONFIG_SND_SOC_CS42L56=m CONFIG_SND_SOC_CS42L73=m CONFIG_SND_SOC_CS4270=m CONFIG_SND_SOC_CS4271=m CONFIG_SND_SOC_CS42XX8=m CONFIG_SND_SOC_CS42XX8_I2C=m CONFIG_SND_SOC_HDMI_CODEC=m +CONFIG_SND_SOC_MAX98090=m CONFIG_SND_SOC_PCM1681=m CONFIG_SND_SOC_PCM1792A=m CONFIG_SND_SOC_PCM512x=m CONFIG_SND_SOC_PCM512x_I2C=m CONFIG_SND_SOC_PCM512x_SPI=m +CONFIG_SND_SOC_RL6231=m CONFIG_SND_SOC_RT5640=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SI476X=m CONFIG_SND_SOC_SIGMADSP=m +CONFIG_SND_SOC_SIGMADSP_I2C=m CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m CONFIG_SND_SOC_SPDIF=m +CONFIG_SND_SOC_STA350=m CONFIG_SND_SOC_TAS5086=m CONFIG_SND_SOC_TLV320AIC3X=m CONFIG_SND_SOC_WM8510=m @@ -5293,6 +5366,7 @@ CONFIG_SONY_FF=y CONFIG_HID_SPEEDLINK=m CONFIG_HID_STEELSERIES=m CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m CONFIG_HID_GREENASIA=m CONFIG_GREENASIA_FF=y CONFIG_HID_HYPERV_MOUSE=m @@ -5333,7 +5407,6 @@ CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # @@ -5344,6 +5417,7 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_OTG=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_OTG_FSM=m CONFIG_USB_MON=m CONFIG_USB_WUSB=m CONFIG_USB_WUSB_CBAF=m @@ -5366,8 +5440,9 @@ CONFIG_USB_ISP1760_HCD=m CONFIG_USB_ISP1362_HCD=m CONFIG_USB_FUSBH200_HCD=m CONFIG_USB_FOTG210_HCD=m +CONFIG_USB_MAX3421_HCD=m CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_HCD_PCI=m CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_U132_HCD=m @@ -5437,16 +5512,21 @@ CONFIG_USB_DWC3_DUAL_ROLE=y # # Platform Glue Driver Support # -CONFIG_USB_DWC3_OMAP=m -CONFIG_USB_DWC3_EXYNOS=m CONFIG_USB_DWC3_PCI=m -CONFIG_USB_DWC3_KEYSTONE=m # # Debugging features # # CONFIG_USB_DWC3_DEBUG is not set -CONFIG_USB_DWC2=m +CONFIG_USB_DWC2=y +CONFIG_USB_DWC2_HOST=m +CONFIG_USB_DWC2_PLATFORM=y +CONFIG_USB_DWC2_PCI=y + +# +# Gadget mode requires USB Gadget support to be enabled +# +CONFIG_USB_DWC2_PERIPHERAL=m # CONFIG_USB_DWC2_DEBUG is not set # CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set CONFIG_USB_CHIPIDEA=m @@ -5563,7 +5643,6 @@ CONFIG_USB_XUSBATM=m # USB Physical Layer drivers # CONFIG_USB_PHY=y -CONFIG_USB_OTG_FSM=m CONFIG_NOP_USB_XCEIV=m CONFIG_SAMSUNG_USBPHY=m CONFIG_SAMSUNG_USB2PHY=m @@ -5572,7 +5651,6 @@ CONFIG_USB_GPIO_VBUS=m CONFIG_TAHVO_USB=m CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y CONFIG_USB_ISP1301=m -CONFIG_USB_RCAR_PHY=m CONFIG_USB_GADGET=m # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -5588,7 +5666,6 @@ CONFIG_USB_GR_UDC=m CONFIG_USB_R8A66597=m CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_PXA27X=m -CONFIG_USB_S3C_HSOTG=m CONFIG_USB_MV_UDC=m CONFIG_USB_MV_U3D=m # CONFIG_USB_M66592 is not set @@ -5689,7 +5766,9 @@ CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m CONFIG_MMC_VUB300=m CONFIG_MMC_USHC=m +CONFIG_MMC_USDHI6ROL0=m CONFIG_MMC_REALTEK_PCI=m +CONFIG_MMC_REALTEK_USB=m CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set @@ -5707,6 +5786,7 @@ CONFIG_MEMSTICK_TIFM_MS=m CONFIG_MEMSTICK_JMICRON_38X=m CONFIG_MEMSTICK_R592=m CONFIG_MEMSTICK_REALTEK_PCI=m +CONFIG_MEMSTICK_REALTEK_USB=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -5714,7 +5794,6 @@ CONFIG_LEDS_CLASS=y # LED drivers # CONFIG_LEDS_88PM860X=m -CONFIG_LEDS_ATMEL_PWM=m CONFIG_LEDS_LM3530=m CONFIG_LEDS_LM3533=m CONFIG_LEDS_LM3642=m @@ -5731,7 +5810,6 @@ CONFIG_LEDS_LP8788=m CONFIG_LEDS_CLEVO_MAIL=m CONFIG_LEDS_PCA955X=m CONFIG_LEDS_PCA963X=m -CONFIG_LEDS_PCA9685=m CONFIG_LEDS_WM831X_STATUS=m CONFIG_LEDS_WM8350=m CONFIG_LEDS_DA903X=m @@ -5748,6 +5826,10 @@ CONFIG_LEDS_MC13783=m CONFIG_LEDS_TCA6507=m CONFIG_LEDS_MAX8997=m CONFIG_LEDS_LM355x=m + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# CONFIG_LEDS_BLINKM=m # @@ -5797,7 +5879,7 @@ CONFIG_INFINIBAND_SRPT=m CONFIG_INFINIBAND_ISER=m CONFIG_INFINIBAND_ISERT=m CONFIG_EDAC=y -CONFIG_EDAC_LEGACY_SYSFS=y +# CONFIG_EDAC_LEGACY_SYSFS is not set # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_DECODE_MCE=m CONFIG_EDAC_MCE_INJ=m @@ -5860,6 +5942,7 @@ CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_TWL4030=m CONFIG_RTC_DRV_TPS6586X=m CONFIG_RTC_DRV_TPS65910=m CONFIG_RTC_DRV_TPS80031=m @@ -5878,6 +5961,7 @@ CONFIG_RTC_DRV_S5M=m CONFIG_RTC_DRV_M41T93=m CONFIG_RTC_DRV_M41T94=m CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1343=m CONFIG_RTC_DRV_DS1347=m CONFIG_RTC_DRV_DS1390=m CONFIG_RTC_DRV_MAX6902=m @@ -5886,6 +5970,7 @@ CONFIG_RTC_DRV_RS5C348=m CONFIG_RTC_DRV_DS3234=m CONFIG_RTC_DRV_PCF2123=m CONFIG_RTC_DRV_RX4581=m +CONFIG_RTC_DRV_MCP795=m # # Platform RTC drivers @@ -5897,6 +5982,7 @@ CONFIG_RTC_DRV_DS1553=m CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_DA9052=m CONFIG_RTC_DRV_DA9055=m +CONFIG_RTC_DRV_DA9063=m CONFIG_RTC_DRV_STK17TA8=m CONFIG_RTC_DRV_M48T86=m CONFIG_RTC_DRV_M48T35=m @@ -5917,6 +6003,7 @@ CONFIG_RTC_DRV_AB3100=m CONFIG_RTC_DRV_PCAP=m CONFIG_RTC_DRV_MC13XXX=m CONFIG_RTC_DRV_MOXART=m +CONFIG_RTC_DRV_XGENE=y # # HID Sensor RTC drivers @@ -5934,14 +6021,13 @@ CONFIG_DW_DMAC_CORE=m CONFIG_DW_DMAC=m CONFIG_DW_DMAC_PCI=m CONFIG_TIMB_DMA=m -CONFIG_PCH_DMA=m CONFIG_DMA_ENGINE=y CONFIG_DMA_ACPI=y # # DMA Clients # -# CONFIG_ASYNC_TX_DMA is not set +CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set CONFIG_DMA_ENGINE_RAID=y CONFIG_DCA=m @@ -6163,15 +6249,13 @@ CONFIG_R8712U=m CONFIG_R8188EU=m CONFIG_88EU_AP_MODE=y CONFIG_88EU_P2P=y +CONFIG_R8192EE=m CONFIG_R8723AU=m CONFIG_8723AU_AP_MODE=y -CONFIG_8723AU_P2P=y CONFIG_8723AU_BT_COEXIST=y CONFIG_R8821AE=m -CONFIG_RTS5139=m -# CONFIG_RTS5139_DEBUG is not set CONFIG_RTS5208=m -CONFIG_RTS5208_DEBUG=y +# CONFIG_RTS5208_DEBUG is not set CONFIG_TRANZPORT=m CONFIG_IDE_PHISON=m CONFIG_LINE6_USB=m @@ -6204,8 +6288,6 @@ CONFIG_AD7291=m CONFIG_AD7606=m CONFIG_AD7606_IFACE_PARALLEL=m CONFIG_AD7606_IFACE_SPI=m -CONFIG_AD799X=m -CONFIG_AD799X_RING_BUFFER=y CONFIG_AD7780=m CONFIG_AD7816=m CONFIG_AD7192=m @@ -6291,7 +6373,6 @@ CONFIG_CXT1E1=m CONFIG_SBE_PMCC4_NCOMM=y CONFIG_FB_XGI=m CONFIG_ACPI_QUICKSTART=m -CONFIG_SBE_2T3E3=m CONFIG_USB_ENESTORAGE=m CONFIG_BCM_WIMAX=m CONFIG_FT1000=m @@ -6328,8 +6409,7 @@ CONFIG_VIDEO_GO7007_LOADER=m CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m CONFIG_USB_MSI3101=m CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_VIDEO_V4L2_INT_DEVICE=m -CONFIG_VIDEO_TCM825X=m +# CONFIG_VIDEO_TCM825X is not set # CONFIG_USB_SN9C102 is not set CONFIG_SOLO6X10=m CONFIG_DVB_RTL2832_SDR=m @@ -6380,6 +6460,8 @@ CONFIG_XILLYBUS_PCIE=m CONFIG_DGNC=m CONFIG_DGAP=m CONFIG_GS_FPGABOOT=m +CONFIG_CRYPTO_SKEIN=y +CONFIG_CRYPTO_THREEFISH=y CONFIG_X86_PLATFORM_DEVICES=y CONFIG_ACER_WMI=m CONFIG_ACERHDF=m @@ -6388,6 +6470,7 @@ CONFIG_ASUS_LAPTOP=m CONFIG_DELL_LAPTOP=m CONFIG_DELL_WMI=m CONFIG_DELL_WMI_AIO=m +CONFIG_DELL_SMO8800=m CONFIG_FUJITSU_LAPTOP=m # CONFIG_FUJITSU_LAPTOP_DEBUG is not set CONFIG_FUJITSU_TABLET=m @@ -6422,7 +6505,6 @@ CONFIG_TOSHIBA_BT_RFKILL=m CONFIG_ACPI_CMPC=m CONFIG_INTEL_IPS=m CONFIG_IBM_RTL=m -CONFIG_XO15_EBOOK=m CONFIG_SAMSUNG_LAPTOP=m CONFIG_MXM_WMI=m CONFIG_INTEL_OAKTRAIL=m @@ -6434,6 +6516,10 @@ CONFIG_PVPANIC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m CONFIG_CHROMEOS_PSTORE=m + +# +# SOC (System On Chip) specific Drivers +# CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y @@ -6521,6 +6607,7 @@ CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m CONFIG_KXSD9=m +CONFIG_MMA8452=m # # Analog to digital converters @@ -6533,6 +6620,7 @@ CONFIG_AD7791=m CONFIG_AD7793=m CONFIG_AD7887=m CONFIG_AD7923=m +CONFIG_AD799X=m CONFIG_LP8788_ADC=m CONFIG_MAX1363=m CONFIG_MCP320X=m @@ -6541,6 +6629,8 @@ CONFIG_MEN_Z188_ADC=m CONFIG_NAU7802=m CONFIG_TI_ADC081C=m CONFIG_TI_AM335X_ADC=m +CONFIG_TWL4030_MADC=m +CONFIG_TWL6030_GPADC=m CONFIG_VIPERBOARD_ADC=m # @@ -6650,6 +6740,7 @@ CONFIG_IIO_ST_MAGN_SPI_3AXIS=m # Inclinometer sensors # CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m # # Triggers - standalone @@ -6661,14 +6752,21 @@ CONFIG_IIO_SYSFS_TRIGGER=m # Pressure sensors # CONFIG_HID_SENSOR_PRESS=m +CONFIG_MPL115=m CONFIG_MPL3115=m CONFIG_IIO_ST_PRESS=m CONFIG_IIO_ST_PRESS_I2C=m CONFIG_IIO_ST_PRESS_SPI=m # +# Lightning sensors +# +CONFIG_AS3935=m + +# # Temperature sensors # +CONFIG_MLX90614=m CONFIG_TMP006=m CONFIG_NTB=m CONFIG_VME_BUS=y @@ -6693,6 +6791,8 @@ CONFIG_PWM=y CONFIG_PWM_SYSFS=y CONFIG_PWM_LP3943=m CONFIG_PWM_LPSS=m +CONFIG_PWM_TWL=m +CONFIG_PWM_TWL_LED=m CONFIG_IPACK_BUS=m CONFIG_BOARD_TPCI200=m CONFIG_SERIAL_IPOCTAL=m @@ -6872,7 +6972,9 @@ CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y @@ -6997,9 +7099,9 @@ CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set -# CONFIG_AFS_FSCACHE is not set +CONFIG_AFS_FSCACHE=y CONFIG_9P_FS=m -# CONFIG_9P_FSCACHE is not set +CONFIG_9P_FSCACHE=y CONFIG_9P_FS_POSIX_ACL=y CONFIG_9P_FS_SECURITY=y CONFIG_NLS=y @@ -7073,7 +7175,6 @@ CONFIG_DYNAMIC_DEBUG=y # Compile-time checks and compiler options # # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_INFO_REDUCED is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 @@ -7148,6 +7249,7 @@ CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set @@ -7166,7 +7268,7 @@ CONFIG_NOTIFIER_ERROR_INJECTION=m CONFIG_CPU_NOTIFIER_ERROR_INJECT=m CONFIG_PM_NOTIFIER_ERROR_INJECT=m # CONFIG_FAULT_INJECTION is not set -CONFIG_LATENCYTOP=y +# CONFIG_LATENCYTOP is not set CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set CONFIG_USER_STACKTRACE_SUPPORT=y @@ -7213,6 +7315,7 @@ CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set CONFIG_MMIOTRACE=y # CONFIG_MMIOTRACE_TEST is not set +# CONFIG_TRACEPOINT_BENCHMARK is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_RING_BUFFER_STARTUP_TEST is not set @@ -7234,6 +7337,7 @@ CONFIG_TEST_KSTRTOX=m # CONFIG_DMA_API_DEBUG is not set CONFIG_TEST_MODULE=m CONFIG_TEST_USER_COPY=m +CONFIG_TEST_BPF=m # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y @@ -7282,7 +7386,7 @@ CONFIG_PERSISTENT_KEYRINGS=y CONFIG_BIG_KEYS=y CONFIG_TRUSTED_KEYS=y CONFIG_ENCRYPTED_KEYS=y -# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y @@ -7329,7 +7433,12 @@ CONFIG_IMA_DEFAULT_HASH_SHA1=y CONFIG_IMA_DEFAULT_HASH="sha1" CONFIG_IMA_APPRAISE=y CONFIG_EVM=y -CONFIG_EVM_HMAC_VERSION=2 + +# +# EVM options +# +CONFIG_EVM_ATTR_FSUUID=y +CONFIG_EVM_EXTRA_SMACK_XATTRS=y # CONFIG_DEFAULT_SECURITY_SELINUX is not set # CONFIG_DEFAULT_SECURITY_SMACK is not set # CONFIG_DEFAULT_SECURITY_TOMOYO is not set @@ -7573,6 +7682,8 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_INTERVAL_TREE=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm index 105a8cb5c6..02a0ae36b5 100644 --- a/gnu/packages/linux.scm +++ b/gnu/packages/linux.scm @@ -1,6 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2012, 2013, 2014 Ludovic Courtès <ludo@gnu.org> -;;; Copyright © 2014 Andreas Enge <andreas@enge.fr> +;;; Copyright © 2013, 2014 Andreas Enge <andreas@enge.fr> ;;; Copyright © 2012 Nikita Karetnikov <nikita@karetnikov.org> ;;; Copyright © 2014 Mark H Weaver <mhw@netris.org> ;;; @@ -23,8 +23,7 @@ #:use-module ((guix licenses) #:hide (zlib)) #:use-module (gnu packages) - #:use-module ((gnu packages compression) - #:renamer (symbol-prefix-proc 'guix:)) + #:use-module ((gnu packages compression) #:prefix guix:) #:use-module (gnu packages flex) #:use-module (gnu packages bison) #:use-module (gnu packages gperf) @@ -44,6 +43,10 @@ #:use-module (gnu packages autotools) #:use-module (gnu packages texinfo) #:use-module (gnu packages check) + #:use-module (gnu packages maths) + #:use-module (gnu packages which) + #:use-module (gnu packages rrdtool) + #:use-module (gnu packages gtk) #:use-module (guix packages) #:use-module (guix download) #:use-module (guix build-system gnu) @@ -165,7 +168,7 @@ (origin (method url-fetch) (uri (string-append "http://www.fsfla.org/svn/fsfla/software/linux-libre/" - "lemote/gnewsense/branches/3.15/100gnu+freedo.patch")) + "lemote/gnewsense/branches/3.16/100gnu+freedo.patch")) (sha256 (base32 "1hk9swxxc80bmn2zd2qr5ccrjrk28xkypwhl4z0qx4hbivj7qm06")))) @@ -186,7 +189,7 @@ for SYSTEM, or #f if there is no configuration for SYSTEM." #f))) (define-public linux-libre - (let* ((version "3.15.8") + (let* ((version "3.16.1") (build-phase '(lambda* (#:key system inputs #:allow-other-keys #:rest args) ;; Apply the neat patch. @@ -259,7 +262,7 @@ for SYSTEM, or #f if there is no configuration for SYSTEM." (uri (linux-libre-urls version)) (sha256 (base32 - "1ichq7b08rrfq61i8kpan9vxw9mxcfpcl8cw0a6lbc1ycwzvm7xw")))) + "1x4y0017l4ndcab4smky2wx0n86r3wyks2r8yyp19ia9ccnl98mf")))) (build-system gnu-build-system) (native-inputs `(("perl" ,perl) ("bc" ,bc) @@ -1341,6 +1344,65 @@ device nodes from /dev/, handles hotplug events and loads drivers at boot time.") (license gpl2+))) ; libudev is under lgpl2.1+ +(define-public lvm2 + (package + (name "lvm2") + (version "2.02.109") + (source (origin + (method url-fetch) + (uri (string-append "ftp://sources.redhat.com/pub/lvm2/releases/LVM2." + version ".tgz")) + (sha256 + (base32 + "1rv5ivg0l1w3nwzwdkqixm96h5bzg7ib4rr196ysb2lw42jmpjbv")) + (modules '((guix build utils))) + (snippet + '(begin + (use-modules (guix build utils)) + + ;; Honor sysconfdir. + (substitute* "make.tmpl.in" + (("confdir = .*$") + "confdir = @sysconfdir@\n") + (("DEFAULT_SYS_DIR = @DEFAULT_SYS_DIR@") + "DEFAULT_SYS_DIR = @sysconfdir@")))))) + (build-system gnu-build-system) + (native-inputs + `(("pkg-config" ,pkg-config) + ("procps" ,procps))) ;tests use 'pgrep' + (inputs + `(("udev" ,udev))) + (arguments + '(#:phases (alist-cons-after + 'configure 'set-makefile-shell + (lambda _ + ;; Use 'sh', not 'bash', so that '. lib/utils.sh' works as + ;; expected. + (setenv "SHELL" (which "sh")) + + ;; Replace /bin/sh with the right file name. + (patch-makefile-SHELL "make.tmpl")) + %standard-phases) + + #:configure-flags (list (string-append "--sysconfdir=" + (assoc-ref %outputs "out") + "/etc/lvm") + "--enable-udev_sync" + "--enable-udev_rules") + + ;; The tests use 'mknod', which requires root access. + #:tests? #f)) + (home-page "http://sourceware.org/lvm2/") + (synopsis "Logical volume management for Linux") + (description + "LVM2 is the logical volume management tool set for Linux-based systems. +This package includes the user-space libraries and tools, including the device +mapper. Kernel components are part of Linux-libre.") + + ;; Libraries (liblvm2, libdevmapper) are LGPLv2.1. + ;; Command-line tools are GPLv2. + (license (list gpl2 lgpl2.1)))) + (define-public wireless-tools (package (name "wireless-tools") @@ -1366,3 +1428,113 @@ Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats.") (home-page "http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html") (license gpl2+))) + +(define-public lm-sensors + (package + (name "lm-sensors") + (version "3.3.5") + (source (origin + (method url-fetch) + (uri (string-append + "http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-" + version ".tar.bz2")) + (sha256 + (base32 + "1ksgrynxgrq590nb2fwxrl1gwzisjkqlyg3ljfd1al0ibrk6mbjx")) + (patches (list (search-patch "lm-sensors-hwmon-attrs.patch"))))) + (build-system gnu-build-system) + (inputs `(("rrdtool" ,rrdtool) + ("perl" ,perl) + ("kmod" ,kmod) + ("gnuplot" ,gnuplot))) + (native-inputs `(("pkg-config" ,pkg-config) + ("flex" ,flex) + ("bison" ,bison) + ("which" ,which))) + (arguments + `(#:tests? #f ; no 'check' target + #:make-flags (list (string-append "PREFIX=" %output) + (string-append "ETCDIR=" %output "/etc") + (string-append "MANDIR=" %output "/share/man")) + #:phases + (alist-delete + 'configure + (alist-cons-before + 'build 'patch-exec-paths + (lambda* (#:key inputs outputs #:allow-other-keys) + (substitute* "prog/detect/sensors-detect" + (("`uname") + (string-append "`" (assoc-ref inputs "coreutils") + "/bin/uname")) + (("(`|\")modprobe" all open-quote) + (string-append open-quote + (assoc-ref inputs "kmod") + "/bin/modprobe"))) + (substitute* '("prog/pwm/pwmconfig" + "prog/pwm/fancontrol") + (("gnuplot") + (string-append (assoc-ref inputs "gnuplot") + "/bin/gnuplot")) + (("cat ") + (string-append (assoc-ref inputs "coreutils") + "/bin/cat ")) + (("egrep ") + (string-append (assoc-ref inputs "grep") + "/bin/egrep ")) + (("sed -e") + (string-append (assoc-ref inputs "sed") + "/bin/sed -e")) + (("cut -d") + (string-append (assoc-ref inputs "coreutils") + "/bin/cut -d")) + (("sleep ") + (string-append (assoc-ref inputs "coreutils") + "/bin/sleep ")) + (("readlink -f") + (string-append (assoc-ref inputs "coreutils") + "/bin/readlink -f")))) + %standard-phases)))) + (home-page "http://www.lm-sensors.org/") + (synopsis "Utilities to read temperature/voltage/fan sensors") + (description + "lm-sensors is a hardware health monitoring package for Linux. It allows +you to access information from temperature, voltage, and fan speed sensors. +It works with most newer systems.") + (license gpl2+))) + +(define-public xsensors + (package + (name "xsensors") + (version "0.70") + (source (origin + (method url-fetch) + (uri (string-append + "http://www.linuxhardware.org/xsensors/xsensors-" + version ".tar.gz")) + (sha256 + (base32 + "1siplsfgvcxamyqf44h71jx6jdfmvhfm7mh0y1q8ps4zs6pj2zwh")))) + (build-system gnu-build-system) + (inputs `(("lm-sensors" ,lm-sensors) + ("gtk" ,gtk+-2))) + (native-inputs `(("pkg-config" ,pkg-config))) + (arguments + `(#:phases (alist-cons-before + 'configure 'enable-deprecated + (lambda _ + (substitute* "src/Makefile.in" + (("-DGDK_DISABLE_DEPRECATED") "") + (("-DGTK_DISABLE_DEPRECATED") ""))) + (alist-cons-before + 'configure 'remove-Werror + (lambda _ + (substitute* '("configure" "src/Makefile.in") + (("-Werror") ""))) + %standard-phases)))) + (home-page "http://www.linuxhardware.org/xsensors/") + (synopsis "Hardware health information viewer") + (description + "xsensors reads data from the libsensors library regarding hardware +health such as temperature, voltage and fan speed and displays the information +in a digital read-out.") + (license gpl2+))) diff --git a/gnu/packages/lvm.scm b/gnu/packages/lvm.scm deleted file mode 100644 index 82e93dcc66..0000000000 --- a/gnu/packages/lvm.scm +++ /dev/null @@ -1,62 +0,0 @@ -;;; GNU Guix --- Functional package management for GNU -;;; Copyright © 2013 Andreas Enge <andreas@enge.fr> -;;; -;;; This file is part of GNU Guix. -;;; -;;; GNU Guix is free software; you can redistribute it and/or modify it -;;; under the terms of the GNU General Public License as published by -;;; the Free Software Foundation; either version 3 of the License, or (at -;;; your option) any later version. -;;; -;;; GNU Guix is distributed in the hope that it will be useful, but -;;; WITHOUT ANY WARRANTY; without even the implied warranty of -;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -;;; GNU General Public License for more details. -;;; -;;; You should have received a copy of the GNU General Public License -;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. - -(define-module (gnu packages lvm) - #:use-module ((guix licenses) - #:renamer (symbol-prefix-proc 'license:)) - #:use-module (guix packages) - #:use-module (guix download) - #:use-module (guix build-system gnu) - #:use-module (gnu packages) - #:use-module (gnu packages linux) - #:use-module (gnu packages pkg-config)) - -(define-public lvm2 - (package - (name "lvm2") - (version "2.02.98") - (source (origin - (method url-fetch) - (uri (string-append "ftp://sources.redhat.com/pub/lvm2/LVM2." - version ".tgz")) - (sha256 - (base32 - "0r6q6z8ip6q5qgkzng0saljassp4912k6i21ra10vq7pzrc0l0vi")))) - (build-system gnu-build-system) - (native-inputs - `(("pkg-config" ,pkg-config) - ("procps" ,procps))) - (arguments - `(#:tests? #f ; require to be root - #:configure-flags - `(,(string-append "--with-confdir=" (assoc-ref %outputs "out") "/etc")) - #:phases - (alist-cons-before - 'configure 'patch-make-tmpl - (lambda _ - (substitute* "make.tmpl.in" - (("/bin/sh") (which "sh")) - (("CC \\?=") "CC ="))) ; force CC argument to be set from configure - %standard-phases))) - (synopsis "logical volume management") - (description - "LVM2 refers to the userspace toolset that provides logical volume -management facilities on linux. It is reasonably backwards-compatible with -the original LVM toolset.") - (license license:gpl2) - (home-page "http://www.sourceware.org/lvm2/"))) diff --git a/gnu/packages/mail.scm b/gnu/packages/mail.scm index 7bdd81b4c8..a9e862ac88 100644 --- a/gnu/packages/mail.scm +++ b/gnu/packages/mail.scm @@ -132,7 +132,7 @@ software.") `(#:configure-flags (list (string-append "--with-ssl=" (assoc-ref %build-inputs "openssl"))))) (home-page "http://fetchmail.berlios.de/") - (synopsis "Remote-mailr etrieval and forwarding utility") + (synopsis "Remote-mail retrieval and forwarding utility") (description "Fetchmail is a full-featured, robust, well-documented remote-mail retrieval and forwarding utility intended to be used over on-demand @@ -332,14 +332,14 @@ attachments, create new maildirs, and so on.") (define-public notmuch (package (name "notmuch") - (version "0.18") + (version "0.18.1") (source (origin (method url-fetch) (uri (string-append "http://notmuchmail.org/releases/notmuch-" version ".tar.gz")) (sha256 (base32 - "1ia65iazz2hlp3ja57yn0chs27rzsky9kayw74njwmgi9faw3vh9")))) + "1pdp9l7yv71d3fjb30qyccva8h03hvg88q4a00yi50v2j70kvmgj")))) (build-system gnu-build-system) (arguments '(#:tests? #f ;; FIXME: Test suite hangs and times out. diff --git a/gnu/packages/mysql.scm b/gnu/packages/mysql.scm index 4258bf6fe5..e89770e907 100644 --- a/gnu/packages/mysql.scm +++ b/gnu/packages/mysql.scm @@ -31,15 +31,15 @@ (define-public mysql (package (name "mysql") - (version "5.1.54") + (version "5.1.73") (source (origin (method url-fetch) (uri (string-append - "http://downloads.mysql.com/archives/mysql-5.1/mysql-" + "http://dev.mysql.com/get/Downloads/MySQL-5.1/mysql-" version ".tar.gz")) (sha256 (base32 - "07xbnwk7h1xya8s6dw34nrv7ampzag8l0l1szd2pc9zyqkzhydw4")))) + "1dfwi4ck0vq6sdci6gz0031s7zz5lc3pddqlgm0292s00l9y5sq5")))) (build-system gnu-build-system) (inputs `(("procps" ,procps) diff --git a/gnu/packages/openssl.scm b/gnu/packages/openssl.scm index 51caa00e68..77e2860826 100644 --- a/gnu/packages/openssl.scm +++ b/gnu/packages/openssl.scm @@ -28,14 +28,14 @@ (define-public openssl (package (name "openssl") - (version "1.0.1h") + (version "1.0.1i") (source (origin (method url-fetch) (uri (string-append "ftp://ftp.openssl.org/source/openssl-" version ".tar.gz")) (sha256 (base32 - "14yhsgag5as7nhxnw7f0vklwjwa3pmn1i15nmp3f4qxa6sc8l74x")))) + "1izwv1wzqdw8aqnvb70jcqpqp0rvkcm22w5c1dm9l1kpr939y5rw")))) (build-system gnu-build-system) (native-inputs `(("perl" ,perl))) (arguments diff --git a/gnu/packages/orpheus.scm b/gnu/packages/orpheus.scm new file mode 100644 index 0000000000..2bc6a6af14 --- /dev/null +++ b/gnu/packages/orpheus.scm @@ -0,0 +1,96 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2014 Eric Bavier <bavier@member.fsf.org> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu packages orpheus) + #:use-module (guix licenses) + #:use-module (guix packages) + #:use-module (guix download) + #:use-module (guix build-system gnu) + #:use-module (gnu packages) + #:use-module (gnu packages ncurses) + #:use-module (gnu packages mp3) + #:use-module (gnu packages which) + #:use-module (gnu packages xiph) + #:use-module (gnu packages xml)) + +(define-public orpheus + (package + (name "orpheus") + (version "1.6") + (source + (origin + (method url-fetch) + (uri (string-append "http://thekonst.net/download/orpheus-" + version ".tar.gz")) + (sha256 + (base32 + "1xbgxq8fybwhm51nw9hvvrgi873qzkc2qvmy15d2m2hw2yqa99hq")) + (patches (list (search-patch "orpheus-cast-errors-and-includes.patch"))))) + (build-system gnu-build-system) + (inputs + `(("ncurses" ,ncurses) + ("libvorbis" ,libvorbis) + ("vorbis-tools" ,vorbis-tools) + ("mpg321" ,mpg321) + ;; TODO: add ghttp + ("libxml2" ,libxml2) + ("which" ,which))) + (arguments + `(#:phases + (alist-replace + 'configure + (lambda* (#:key outputs #:allow-other-keys) + ;; This old `configure' script does not support variables passed as + ;; arguments. + (let ((out (assoc-ref outputs "out"))) + (setenv "CONFIG_SHELL" (which "bash")) + (setenv "SHELL" (which "bash")) + (setenv "LIBS" "-logg") ;doesn't declare its use of libogg + (zero? + (system* "./configure" (string-append "--prefix=" out))))) + (alist-cons-after + 'configure 'configure-players + (lambda* (#:key inputs #:allow-other-keys) + ;; To avoid propagating the mpg321 and vorbis-tools inputs, we can + ;; make the orpheus application execute the needed players from the + ;; store. + (let ((ogg123 (string-append (assoc-ref inputs "vorbis-tools") + "/bin/ogg123")) + (mpg321 (string-append (assoc-ref inputs "mpg321") + "/bin/mpg321")) + (which (string-append (assoc-ref inputs "which") + "/bin/which"))) + (substitute* "src/orpheusconf.cc" + (("ogg123") ogg123) + (("which") which) + (("mpg321") mpg321)))) + (alist-cons-before + 'build 'patch-shells + (lambda _ + (substitute* '("src/mp3track.cc" + "src/streamtrack.cc" + "src/oggtrack.cc") + (("/bin/sh") (which "bash")))) + %standard-phases))))) + (home-page "http://thekonst.net/en/orpheus") + (synopsis "Text-mode audio player") + (description + "Orpheus is a light-weight text mode menu- and window-driven audio player +application for CDs, internet stream broadcasts, and files in MP3 and Vorbis +OGG format.") + (license gpl2+))) diff --git a/gnu/packages/patches/avrdude-fix-libusb.patch b/gnu/packages/patches/avrdude-fix-libusb.patch new file mode 100644 index 0000000000..13d0eca91c --- /dev/null +++ b/gnu/packages/patches/avrdude-fix-libusb.patch @@ -0,0 +1,256 @@ +Avrdude cannot build with our version of libusb. This patch fixes that. +See http://savannah.nongnu.org/bugs/?41854 + +diff --git a/dfu.c b/dfu.c +index 7d349bc..0f80440 100644 +--- a/dfu.c ++++ b/dfu.c +@@ -36,13 +36,14 @@ + + #ifndef HAVE_LIBUSB + +-int dfu_open(struct dfu_dev *dfu, char *port_name) { ++struct dfu_dev * dfu_open(char *port_spec) { + fprintf(stderr, "%s: Error: No USB support in this compile of avrdude\n", + progname); +- return -1; ++ return NULL; + } + +-int dfu_init(struct dfu_dev *dfu, unsigned short usb_pid) { ++int dfu_init(struct dfu_dev *dfu, ++ unsigned short vid, unsigned short pid) { + return -1; + } + +diff --git a/flip1.c b/flip1.c +index b891d80..0959996 100644 +--- a/flip1.c ++++ b/flip1.c +@@ -164,6 +164,8 @@ static void flip1_setup(PROGRAMMER * pgm); + static void flip1_teardown(PROGRAMMER * pgm); + + /* INTERNAL PROGRAMMER FUNCTION PROTOTYPES */ ++#ifdef HAVE_LIBUSB ++// The internal ones are made conditional, as they're not defined further down #ifndef HAVE_LIBUSB + + static void flip1_show_info(struct flip1 *flip1); + +@@ -177,6 +179,8 @@ static const char * flip1_mem_unit_str(enum flip1_mem_unit mem_unit); + static int flip1_set_mem_page(struct dfu_dev *dfu, unsigned short page_addr); + static enum flip1_mem_unit flip1_mem_unit(const char *name); + ++#endif /* HAVE_LIBUSB */ ++ + /* THE INITPGM FUNCTION DEFINITIONS */ + + void flip1_initpgm(PROGRAMMER *pgm) +@@ -201,6 +205,7 @@ void flip1_initpgm(PROGRAMMER *pgm) + pgm->teardown = flip1_teardown; + } + ++#ifdef HAVE_LIBUSB + /* EXPORTED PROGRAMMER FUNCTION DEFINITIONS */ + + int flip1_open(PROGRAMMER *pgm, char *port_spec) +@@ -876,3 +881,82 @@ enum flip1_mem_unit flip1_mem_unit(const char *name) { + return FLIP1_MEM_UNIT_EEPROM; + return FLIP1_MEM_UNIT_UNKNOWN; + } ++#else /* HAVE_LIBUSB */ ++// Dummy functions ++int flip1_open(PROGRAMMER *pgm, char *port_spec) ++{ ++ fprintf(stderr, "%s: Error: No USB support in this compile of avrdude\n", ++ progname); ++ return NULL; ++} ++ ++int flip1_initialize(PROGRAMMER* pgm, AVRPART *part) ++{ ++ return -1; ++} ++ ++void flip1_close(PROGRAMMER* pgm) ++{ ++} ++ ++void flip1_enable(PROGRAMMER* pgm) ++{ ++} ++ ++void flip1_disable(PROGRAMMER* pgm) ++{ ++} ++ ++void flip1_display(PROGRAMMER* pgm, const char *prefix) ++{ ++} ++ ++int flip1_program_enable(PROGRAMMER* pgm, AVRPART *part) ++{ ++ return -1; ++} ++ ++int flip1_chip_erase(PROGRAMMER* pgm, AVRPART *part) ++{ ++ return -1; ++} ++ ++int flip1_read_byte(PROGRAMMER* pgm, AVRPART *part, AVRMEM *mem, ++ unsigned long addr, unsigned char *value) ++{ ++ return -1; ++} ++ ++int flip1_write_byte(PROGRAMMER* pgm, AVRPART *part, AVRMEM *mem, ++ unsigned long addr, unsigned char value) ++{ ++ return -1; ++} ++ ++int flip1_paged_load(PROGRAMMER* pgm, AVRPART *part, AVRMEM *mem, ++ unsigned int page_size, unsigned int addr, unsigned int n_bytes) ++{ ++ return -1; ++} ++ ++int flip1_paged_write(PROGRAMMER* pgm, AVRPART *part, AVRMEM *mem, ++ unsigned int page_size, unsigned int addr, unsigned int n_bytes) ++{ ++ return -1; ++} ++ ++int flip1_read_sig_bytes(PROGRAMMER* pgm, AVRPART *part, AVRMEM *mem) ++{ ++ return -1; ++} ++ ++void flip1_setup(PROGRAMMER * pgm) ++{ ++} ++ ++void flip1_teardown(PROGRAMMER * pgm) ++{ ++} ++ ++ ++#endif /* HAVE_LIBUSB */ +\ No newline at end of file + +diff --git a/flip2.c b/flip2.c +index ed8e996..16c4bf8 100644 +--- a/flip2.c ++++ b/flip2.c +@@ -151,6 +151,8 @@ static void flip2_setup(PROGRAMMER * pgm); + static void flip2_teardown(PROGRAMMER * pgm); + + /* INTERNAL PROGRAMMER FUNCTION PROTOTYPES */ ++#ifdef HAVE_LIBUSB ++// The internal ones are made conditional, as they're not defined further down #ifndef HAVE_LIBUSB + + static void flip2_show_info(struct flip2 *flip2); + +@@ -171,6 +173,8 @@ static const char * flip2_status_str(const struct dfu_status *status); + static const char * flip2_mem_unit_str(enum flip2_mem_unit mem_unit); + static enum flip2_mem_unit flip2_mem_unit(const char *name); + ++#endif /* HAVE_LIBUSB */ ++ + /* THE INITPGM FUNCTION DEFINITIONS */ + + void flip2_initpgm(PROGRAMMER *pgm) +@@ -195,6 +199,7 @@ void flip2_initpgm(PROGRAMMER *pgm) + pgm->teardown = flip2_teardown; + } + ++#ifdef HAVE_LIBUSB + /* EXPORTED PROGRAMMER FUNCTION DEFINITIONS */ + + int flip2_open(PROGRAMMER *pgm, char *port_spec) +@@ -922,3 +927,85 @@ enum flip2_mem_unit flip2_mem_unit(const char *name) { + return FLIP2_MEM_UNIT_SIGNATURE; + return FLIP2_MEM_UNIT_UNKNOWN; + } ++ ++#else /* HAVE_LIBUSB */ ++ ++/* EXPORTED PROGRAMMER FUNCTION DEFINITIONS */ ++ ++int flip2_open(PROGRAMMER *pgm, char *port_spec) ++{ ++ fprintf(stderr, "%s: Error: No USB support in this compile of avrdude\n", ++ progname); ++ return NULL; ++} ++ ++int flip2_initialize(PROGRAMMER* pgm, AVRPART *part) ++{ ++ return -1; ++} ++ ++void flip2_close(PROGRAMMER* pgm) ++{ ++} ++ ++void flip2_enable(PROGRAMMER* pgm) ++{ ++} ++ ++void flip2_disable(PROGRAMMER* pgm) ++{ ++} ++ ++void flip2_display(PROGRAMMER* pgm, const char *prefix) ++{ ++} ++ ++int flip2_program_enable(PROGRAMMER* pgm, AVRPART *part) ++{ ++ return -1; ++} ++ ++int flip2_chip_erase(PROGRAMMER* pgm, AVRPART *part) ++{ ++ return -1; ++} ++ ++int flip2_read_byte(PROGRAMMER* pgm, AVRPART *part, AVRMEM *mem, ++ unsigned long addr, unsigned char *value) ++{ ++ return -1; ++} ++ ++int flip2_write_byte(PROGRAMMER* pgm, AVRPART *part, AVRMEM *mem, ++ unsigned long addr, unsigned char value) ++{ ++ return -1; ++} ++ ++int flip2_paged_load(PROGRAMMER* pgm, AVRPART *part, AVRMEM *mem, ++ unsigned int page_size, unsigned int addr, unsigned int n_bytes) ++{ ++ return -1; ++} ++ ++int flip2_paged_write(PROGRAMMER* pgm, AVRPART *part, AVRMEM *mem, ++ unsigned int page_size, unsigned int addr, unsigned int n_bytes) ++{ ++ return -1; ++} ++ ++int flip2_read_sig_bytes(PROGRAMMER* pgm, AVRPART *part, AVRMEM *mem) ++{ ++ return -1; ++} ++ ++void flip2_setup(PROGRAMMER * pgm) ++{ ++} ++ ++void flip2_teardown(PROGRAMMER * pgm) ++{ ++} ++ ++ ++#endif /* HAVE_LIBUSB */ diff --git a/gnu/packages/patches/curl-fix-test172.patch b/gnu/packages/patches/curl-fix-test172.patch deleted file mode 100644 index cc2c2705e7..0000000000 --- a/gnu/packages/patches/curl-fix-test172.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff --git a/tests/data/test172 b/tests/data/test172 -index b3efae9..3d53418 100644 ---- a/tests/data/test172 -+++ b/tests/data/test172 -@@ -36,7 +36,7 @@ http://%HOSTIP:%HTTPPORT/we/want/172 -b log/jar172.txt -b "tool=curl; name=fool" - - .%HOSTIP TRUE /silly/ FALSE 0 ismatch this - .%HOSTIP TRUE / FALSE 0 partmatch present --%HOSTIP FALSE /we/want/ FALSE 1391252187 nodomain value -+%HOSTIP FALSE /we/want/ FALSE 2139150993 nodomain value - </file> - </client> diff --git a/gnu/packages/patches/flashrom-use-libftdi1.patch b/gnu/packages/patches/flashrom-use-libftdi1.patch new file mode 100644 index 0000000000..a6051df30a --- /dev/null +++ b/gnu/packages/patches/flashrom-use-libftdi1.patch @@ -0,0 +1,70 @@ +Update to libftdi-1.0 is advertised as a drop-in replacement for libftdi, +running on top of libusb-1.0. This also removes indirect dependency to +libusb-0.1. + +Patch by Kyösti Mälkki <kyosti.malkki@gmail.com>. +See <http://patchwork.coreboot.org/patch/3904/>. + +--- flashrom/Makefile.orig 2013-08-13 18:00:00.000000000 -0400 ++++ flashrom/Makefile 2014-08-05 03:10:40.217145375 -0400 +@@ -492,19 +492,21 @@ + ifeq ($(CONFIG_FT2232_SPI), yes) + # This is a totally ugly hack. + FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'") +-NEED_FTDI := yes ++NEED_FTDI1 := yes + PROGRAMMER_OBJS += ft2232_spi.o + endif + + ifeq ($(CONFIG_USBBLASTER_SPI), yes) + # This is a totally ugly hack. + FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_USBBLASTER_SPI=1'") +-NEED_FTDI := yes ++NEED_LIBUSB1 := yes ++NEED_FTDI1 := yes + PROGRAMMER_OBJS += usbblaster_spi.o + endif + +-ifeq ($(NEED_FTDI), yes) +-FTDILIBS := $(shell pkg-config --libs libftdi 2>/dev/null || printf "%s" "-lftdi -lusb") ++ifeq ($(NEED_FTDI1), yes) ++FTDILIBS := $(shell pkg-config --libs libftdi1 2>/dev/null || printf "%s" "-lftdi1 -lusb-1.0") ++FEATURE_CFLAGS += $(shell pkg-config --cflags libftdi1 2>/dev/null) + FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'") + FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)") + # We can't set NEED_USB here because that would transform libftdi auto-enabling +@@ -781,6 +783,7 @@ + endif + + define FTDI_TEST ++#include <stddef.h> + #include <ftdi.h> + struct ftdi_context *ftdic = NULL; + int main(int argc, char **argv) +@@ -793,6 +796,7 @@ + export FTDI_TEST + + define FTDI_232H_TEST ++#include <stddef.h> + #include <ftdi.h> + enum ftdi_chip_type type = TYPE_232H; + endef +@@ -826,15 +830,15 @@ + + features: compiler + @echo "FEATURES := yes" > .features.tmp +-ifeq ($(NEED_FTDI), yes) ++ifeq ($(NEED_FTDI1), yes) + @printf "Checking for FTDI support... " + @echo "$$FTDI_TEST" > .featuretest.c +- @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \ ++ @$(CC) $(CPPFLAGS) $(CFLAGS) $(FEATURE_CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \ + ( echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ) || \ + ( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp ) + @printf "Checking for FT232H support in libftdi... " + @echo "$$FTDI_232H_TEST" >> .featuretest.c +- @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \ ++ @$(CC) $(CPPFLAGS) $(CFLAGS) $(FEATURE_CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \ + ( echo "found."; echo "FT232H := yes" >> .features.tmp ) || \ + ( echo "not found."; echo "FT232H := no" >> .features.tmp ) + endif diff --git a/gnu/packages/patches/lm-sensors-hwmon-attrs.patch b/gnu/packages/patches/lm-sensors-hwmon-attrs.patch new file mode 100644 index 0000000000..12979e7bd1 --- /dev/null +++ b/gnu/packages/patches/lm-sensors-hwmon-attrs.patch @@ -0,0 +1,85 @@ +fancontrol: Deal with moving hwmon attributes + +Several kernel drivers have already moved their attributes from the +hardware device to the hwmon class device, and others will follow. +Teach fancontrol about this possibility and let it adjust the attribute +paths transparently. + +Patch by Jean Delvare <khali@linux-fr.org>. +See <http://www.lm-sensors.org/changeset/6216>. + +--- lm-sensors/prog/pwm/fancontrol (revision 6172) ++++ lm-sensors/prog/pwm/fancontrol (revision 6216) +@@ -207,4 +207,63 @@ + } + ++function FixupDeviceFiles ++{ ++ local DEVICE="$1" ++ local fcvcount pwmo tsen fan ++ ++ let fcvcount=0 ++ while (( $fcvcount < ${#AFCPWM[@]} )) # go through all pwm outputs ++ do ++ pwmo=${AFCPWM[$fcvcount]} ++ AFCPWM[$fcvcount]=${pwmo//$DEVICE\/device/$DEVICE} ++ if [ "${AFCPWM[$fcvcount]}" != "$pwmo" ] ++ then ++ echo "Adjusing $pwmo -> ${AFCPWM[$fcvcount]}" ++ fi ++ let fcvcount=$fcvcount+1 ++ done ++ ++ let fcvcount=0 ++ while (( $fcvcount < ${#AFCTEMP[@]} )) # go through all temp inputs ++ do ++ tsen=${AFCTEMP[$fcvcount]} ++ AFCTEMP[$fcvcount]=${tsen//$DEVICE\/device/$DEVICE} ++ if [ "${AFCTEMP[$fcvcount]}" != "$tsen" ] ++ then ++ echo "Adjusing $tsen -> ${AFCTEMP[$fcvcount]}" ++ fi ++ let fcvcount=$fcvcount+1 ++ done ++ ++ let fcvcount=0 ++ while (( $fcvcount < ${#AFCFAN[@]} )) # go through all fan inputs ++ do ++ fan=${AFCFAN[$fcvcount]} ++ AFCFAN[$fcvcount]=${fan//$DEVICE\/device/$DEVICE} ++ if [ "${AFCFAN[$fcvcount]}" != "$fan" ] ++ then ++ echo "Adjusing $fan -> ${AFCFAN[$fcvcount]}" ++ fi ++ let fcvcount=$fcvcount+1 ++ done ++} ++ ++# Some drivers moved their attributes from hard device to class device ++function FixupFiles ++{ ++ local DEVPATH="$1" ++ local entry device ++ ++ for entry in $DEVPATH ++ do ++ device=`echo "$entry" | sed -e 's/=[^=]*$//'` ++ ++ if [ -e "$device/name" ] ++ then ++ FixupDeviceFiles "$device" ++ fi ++ done ++} ++ + # Check that all referenced sysfs files exist + function CheckFiles +@@ -306,4 +365,8 @@ + echo "Configuration appears to be outdated, please run pwmconfig again" >&2 + exit 1 ++fi ++if [ "$DIR" = "/sys/class/hwmon" ] ++then ++ FixupFiles "$DEVPATH" + fi + CheckFiles || exit 1 diff --git a/gnu/packages/patches/orpheus-cast-errors-and-includes.patch b/gnu/packages/patches/orpheus-cast-errors-and-includes.patch new file mode 100644 index 0000000000..159f242f5c --- /dev/null +++ b/gnu/packages/patches/orpheus-cast-errors-and-includes.patch @@ -0,0 +1,51 @@ +The 'intcompare' definition was causing a "cast from 'void*' to 'int' loses +precision [-fpermissive]" error. It isn't used anywhere, so simply remove it. +Same with 'findint' in texteditor.cc. + +Fix other "cast from ‘void*’ to ‘int’ loses precision" errors. + +--- a/kkstrtext-0.1/kkstrtext.cc 2005-01-31 18:13:24.000000000 -0600 ++++ b/kkstrtext-0.1/kkstrtext.cc 2014-07-24 00:25:07.149305476 -0500 +@@ -430,10 +430,6 @@ + } + } + +-int intcompare(void *s1, void *s2) { +- return (int) s1 != (int) s2; +-} +- + string i2str(int i) { + char buf[64]; + sprintf(buf, "%d", i); +@@ -885,7 +881,7 @@ + #ifdef HAVE_ICONV + iconv_t cd = iconv_open(tocs.c_str(), fromcs.c_str()); + +- if(((int) cd) != -1) { ++ if(cd != (iconv_t) -1) { + string r, text(atext); + size_t inleft, outleft, soutleft; + char *inbuf, *outbuf, *sinbuf, *soutbuf; +--- a/kkconsui-0.1/src/texteditor.cc 2003-09-09 16:51:33.000000000 -0500 ++++ b/kkconsui-0.1/src/texteditor.cc 2014-07-24 00:33:20.093279060 -0500 +@@ -1939,10 +1939,6 @@ + if(ur) delete ur; + } + +-int texteditor::findint(void *p1, void *p2) { +- return *(int *) p1 != (int) p2; +-} +- + int texteditor::findhighline(void *p1, void *p2) { + return *(int *) p1 != ((highline *) p2)->line; + } +--- a/src/streamtrack.cc 2006-05-11 12:45:20.000000000 -0500 ++++ b/src/streamtrack.cc 2014-07-24 00:38:10.797263482 -0500 +@@ -34,6 +34,7 @@ + #include <sys/wait.h> + #include <sys/stat.h> + #include <signal.h> ++#include <unistd.h> + + #include <algorithm> + diff --git a/gnu/packages/patches/texi2html-document-encoding.patch b/gnu/packages/patches/texi2html-document-encoding.patch new file mode 100644 index 0000000000..1469b67fa6 --- /dev/null +++ b/gnu/packages/patches/texi2html-document-encoding.patch @@ -0,0 +1,31 @@ +Patch derived from discussion at https://savannah.nongnu.org/bugs/?37503 + +--- texi2html-5.0/texi2html.pl 2010-06-30 17:01:27.000000000 -0500 ++++ texi2html-5.0/texi2html.pl 2014-07-09 01:17:57.062990582 -0500 +@@ -2589,7 +2589,12 @@ + my $state = shift; + + # FIXME this should be done only once, for @documentencoding +- my $encoding = lc(Texi2HTML::Config::get_conf('DOCUMENT_ENCODING')); ++ my $encoding; ++ my $input_encoding = Texi2HTML::Config::get_conf('documentencoding'); ++ if (defined($input_encoding)) ++ { ++ $encoding = lc($input_encoding); ++ } + if (defined($encoding) and $encoding ne '' and exists($Texi2HTML::Config::t2h_encoding_aliases{$encoding})) + { + $encoding = $Texi2HTML::Config::t2h_encoding_aliases{$encoding}; + +Fix failures in test/encodings. + +--- texi2html-5.0/texi2html.pl 2014-07-09 01:22:06.000000000 -0500 ++++ texi2html-5.0/texi2html.pl 2014-07-10 23:23:47.182097602 -0500 +@@ -53,6 +53,7 @@ + # for translations + #use encoding 'utf8'; + #use utf8; ++binmode STDERR, ':encoding(utf8)'; + + # + # According to diff --git a/gnu/packages/patches/texi2html-i18n.patch b/gnu/packages/patches/texi2html-i18n.patch new file mode 100644 index 0000000000..eba903d068 --- /dev/null +++ b/gnu/packages/patches/texi2html-i18n.patch @@ -0,0 +1,50 @@ +Do not try to regenerate po files; use the reference files that are packaged +in the tarball. + +--- a/Makefile.in 2010-06-30 17:02:28.000000000 -0500 ++++ b/Makefile.in 2014-08-16 00:22:38.447050269 -0500 +@@ -1022,15 +1022,7 @@ + + i18n/en.thl i18n/: $(po_document_dir)/po_document/$(PACKAGE)_document.pot + $(MKDIR_P) i18n +- if test '$(USE_NLS)' = 'yes'; then \ +- for file in "$(srcdir)/$(po_document_dir)/po_document/"*".po"; do lang=`basename "$$file" .po | sed 's/\..*//'`; \ +- test "$$lang" = 'en' && continue; \ +- msgexec -i "$$file" "$(srcdir)/gettext_to_separated.pl" | "$(srcdir)/separated_to_hash.pl" $$lang > i18n/$$lang.thl; \ +- done; \ +- msgexec -i $< "$(srcdir)/gettext_to_separated.pl" | "$(srcdir)/separated_to_hash.pl" en > i18n/en.thl; \ +- else \ +- cp -p i18n_ref/*.thl i18n; \ +- fi ++ cp -p i18n_ref/*.thl i18n + + i18n_ref: + $(MKDIR_P) i18n_ref + +Have install-sh install .mo files locally for in-source tests, so that msgfmt +is not needed. + +--- a/Makefile.in 2010-06-30 17:02:28.000000000 -0500 ++++ b/Makefile.in 2014-08-16 00:22:38.447050269 -0500 +@@ -1052,19 +1044,8 @@ + # update the po files, and install locally the .mo files for the in + # source tests + check-local: makeinfo.pl texi2any.pl +- if test '$(USE_NLS)' = 'yes'; then \ +- cd $(po_document_dir)/po_document && $(MAKE) $(AM_MAKEFLAGS) update-po; \ +- fi +- rm -rf locales +- for file in "$(srcdir)/$(po_document_dir)/po_document/"*.po; do \ +- basename=`basename "$$file" .po` ; \ +- $(MKDIR_P) "locales/$$basename/LC_MESSAGES/" ; \ +- if test '$(USE_NLS)' = 'yes'; then \ +- $(MSGFMT) "$$file" -o "locales/$$basename/LC_MESSAGES/texi2html_document.mo" ; \ +- else \ +- cp -p "$(srcdir)/$(po_document_dir)/po_document/$$basename.mo" "locales/$$basename/LC_MESSAGES/texi2html_document.mo" ; \ +- fi; \ +- done ++ $(MAKE) -C po_document localedir="$(abs_srcdir)/locales" install-data ++ $(MAKE) -C po_messages localedir="$(abs_srcdir)/locales" install-data + + makeinfo.pl texi2any.pl: + -$(LN_S) $(srcdir)/texi2html.pl $@ diff --git a/gnu/packages/rrdtool.scm b/gnu/packages/rrdtool.scm new file mode 100644 index 0000000000..a07d705373 --- /dev/null +++ b/gnu/packages/rrdtool.scm @@ -0,0 +1,75 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2014 Mark H Weaver <mhw@netris.org> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu packages rrdtool) + #:use-module ((guix licenses) #:prefix license:) + #:use-module (guix packages) + #:use-module (guix download) + #:use-module (guix build-system gnu) + #:use-module (gnu packages) + #:use-module (gnu packages base) + #:use-module (gnu packages pkg-config) + #:use-module (gnu packages groff) + #:use-module (gnu packages python) + #:use-module (gnu packages fontutils) + #:use-module (gnu packages glib) + #:use-module (gnu packages gtk) + #:use-module (gnu packages xml)) + +(define-public rrdtool + (package + (name "rrdtool") + (version "1.4.8") + (source (origin + (method url-fetch) + (uri (string-append "http://oss.oetiker.ch/rrdtool/pub/rrdtool-" + version ".tar.gz")) + (sha256 + (base32 + "1mpki7pv5ql73h5al04dps6dky0nqc3mmb8ac21hd2s8mbsvk5fy")))) + (build-system gnu-build-system) + (inputs `(("cairo" ,cairo) + ("glib" ,glib) + ("gtk" ,gtk+-2) + ("pango" ,pango) + ("freetype" ,freetype) + ("libxml2" ,libxml2) + ("python" ,python-2))) + (native-inputs `(("pkg-config" ,pkg-config) + ("groff" ,groff))) + (arguments + '(#:phases (alist-cons-before + 'configure 'pre-configure + (lambda _ + (substitute* "libtool" + (("/bin/sed") (which "sed"))) + (substitute* "src/Makefile.in" + (("^rrdcached_LDADD = librrd_th.la") + "rrdcached_LDADD = librrd_th.la -lglib-2.0"))) + %standard-phases))) + (home-page "http://oss.oetiker.ch/rrdtool/") + (synopsis "Time-series data storage and display system") + (description + "The Round Robin Database Tool (RRDtool) is a system to store and display +time-series data (e.g. network bandwidth, machine-room temperature, server +load average). It stores the data in Round Robin Databases (RRDs), a very +compact way that will not expand over time. RRDtool processes the extracted +data to enforce a certain data density, allowing for useful graphical +representation of data values.") + (license license:gpl2+))) ; with license exception that allows combining + ; with many other licenses. diff --git a/gnu/packages/search.scm b/gnu/packages/search.scm index 282893d2e6..f56a85e005 100644 --- a/gnu/packages/search.scm +++ b/gnu/packages/search.scm @@ -29,13 +29,13 @@ (define-public xapian (package (name "xapian") - (version "1.2.17") + (version "1.2.18") (source (origin (method url-fetch) (uri (string-append "http://oligarchy.co.uk/xapian/" version "/xapian-core-" version ".tar.xz")) (sha256 - (base32 "1pn65h06c23imck2pb42zhrrngch3clk39wl2bjwyqhfyfq4b7g7")))) + (base32 "16i063xzwxdrqy32vlr292lljb65hkg3xx0i2m0qx2v00pcn4b3n")))) (build-system gnu-build-system) (inputs `(("zlib" ,zlib) ("util-linux" ,util-linux))) diff --git a/gnu/packages/texinfo.scm b/gnu/packages/texinfo.scm index 0f21ec3211..0cce38bf8d 100644 --- a/gnu/packages/texinfo.scm +++ b/gnu/packages/texinfo.scm @@ -1,5 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2012, 2013 Ludovic Courtès <ludo@gnu.org> +;;; Copyright © 2014 Eric Bavier <bavier@member.fsf.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -21,6 +22,7 @@ #:use-module (guix packages) #:use-module (guix download) #:use-module (guix build-system gnu) + #:use-module (gnu packages) #:use-module (gnu packages compression) #:use-module (gnu packages perl) #:use-module (gnu packages ncurses)) @@ -64,3 +66,42 @@ is on expressing the content semantically, avoiding physical markup commands.") (base32 "1rf9ckpqwixj65bw469i634897xwlgkm5i9g2hv3avl6mv7b0a3d")))) (inputs `(("ncurses" ,ncurses) ("xz" ,xz))))) + +(define-public texi2html + (package + (name "texi2html") + (version "5.0") + (source (origin + (method url-fetch) + (uri (string-append "mirror://savannah/" name "/" name "-" + version ".tar.bz2")) + (sha256 + (base32 + "1yprv64vrlcbksqv25asplnjg07mbq38lfclp1m5lj8cw878pag8")) + (patches + (list (search-patch "texi2html-document-encoding.patch") + (search-patch "texi2html-i18n.patch"))) + (snippet + ;; This file is modified by the patch above, but reset its + ;; timestamp so we don't trigger the rule to update PO files, + ;; which would require Gettext. + ;; See <http://bugs.gnu.org/18247>. + '(utime "texi2html.pl" 0 0 0 0)))) + (build-system gnu-build-system) + (inputs `(("perl" ,perl))) + (home-page "http://www.nongnu.org/texi2html/") + (synopsis "Convert Texinfo to HTML") + (description + "Texi2HTML is a Perl script which converts Texinfo source files to HTML +output. It now supports many advanced features, such as internationalization +and extremely configurable output formats. + +Development of Texi2HTML moved to the GNU Texinfo repository in 2010, since it +was meant to replace the makeinfo implementation in GNU Texinfo. The route +forward for authors is, in most cases, to alter manuals and build processes as +necessary to use the new features of the makeinfo/texi2any implementation of +GNU Texinfo. The Texi2HTML maintainers (one of whom is the principal author +of the GNU Texinfo implementation) do not intend to make further releases of +Texi2HTML.") + ;; Files in /lib under lgpl2.1+ and x11 + (license gpl2+))) diff --git a/gnu/packages/tor.scm b/gnu/packages/tor.scm index 9a9415c626..a756ebdba3 100644 --- a/gnu/packages/tor.scm +++ b/gnu/packages/tor.scm @@ -32,14 +32,14 @@ (define-public tor (package (name "tor") - (version "0.2.4.22") + (version "0.2.4.23") (source (origin (method url-fetch) (uri (string-append "https://www.torproject.org/dist/tor-" version ".tar.gz")) (sha256 (base32 - "0k39ppcvld6p08yaf4rpspb34z4f5863j0d605yrm4dqjcp99xvb")))) + "0a8l6d82hk4wbn7nlphd3c1maxhgdli8338wbg5r9dk6zcy7k8q5")))) (build-system gnu-build-system) (inputs `(("zlib" ,zlib) diff --git a/gnu/packages/version-control.scm b/gnu/packages/version-control.scm index d58cb94ac9..83ad35fb77 100644 --- a/gnu/packages/version-control.scm +++ b/gnu/packages/version-control.scm @@ -294,14 +294,14 @@ property manipulation.") (define-public subversion (package (name "subversion") - (version "1.7.14") + (version "1.7.18") (source (origin (method url-fetch) (uri (string-append "http://archive.apache.org/dist/subversion/subversion-" version ".tar.bz2")) (sha256 (base32 - "038jbcpwm083abp0rvk0fhnx65kp9mz1qvzs3f83ig8fxcvqzb64")))) + "06nrqnn3qq1hhskkcdbm0ilk2xv6ay2gyf2c7qvxp6xncb782wzn")))) (build-system gnu-build-system) (arguments '(#:phases (alist-cons-after diff --git a/gnu/packages/video.scm b/gnu/packages/video.scm index 8850543c1d..23c63fabdb 100644 --- a/gnu/packages/video.scm +++ b/gnu/packages/video.scm @@ -1,6 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2013, 2014 Andreas Enge <andreas@enge.fr> ;;; Copyright © 2014 David Thompson <davet@gnu.org> +;;; Copyright © 2014 Mark H Weaver <mhw@netris.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -18,6 +19,7 @@ ;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. (define-module (gnu packages video) + #:use-module (ice-9 match) #:use-module ((guix licenses) #:select (gpl2 gpl2+ bsd-3 public-domain)) #:use-module (guix packages) @@ -56,14 +58,14 @@ (define-public ffmpeg (package (name "ffmpeg") - (version "2.3") + (version "2.3.1") (source (origin (method url-fetch) (uri (string-append "http://www.ffmpeg.org/releases/ffmpeg-" version ".tar.bz2")) (sha256 (base32 - "17l0bx95al6cjhz3pzfcbwg07sbfbwqbxg34zl5lhl89w9jbngbb")))) + "10w1sw5c9qjlaqlr77r3znzm7y0y9qpkni0mfr9rhij22562yspf")))) (build-system gnu-build-system) (inputs `(("fontconfig" ,fontconfig) @@ -168,31 +170,11 @@ "--enable-libtheora" "--enable-libvorbis" "--enable-libvpx" - ;; drop special machine instructions not supported - ;; on all instances of the target - ,@(if (string-prefix? "x86_64" - (or (%current-target-system) - (%current-system))) - '() - '("--disable-amd3dnow" - "--disable-amd3dnowext" - "--disable-mmx" - "--disable-mmxext" - "--disable-sse" - "--disable-sse2")) - "--disable-altivec" - "--disable-sse3" - "--disable-ssse3" - "--disable-sse4" - "--disable-sse42" - "--disable-avx" - "--disable-fma4" - "--disable-avx2" - "--disable-armv5te" - "--disable-armv6" - "--disable-armv6t2" - "--disable-vfp" - "--disable-neon" + + "--enable-runtime-cpudetect" + + ;; Runtime cpu detection is not implemented on + ;; MIPS, so we disable some features. "--disable-mips32r2" "--disable-mipsdspr1" "--disable-mipsdspr2" @@ -268,10 +250,6 @@ audio/video codec library.") (arguments `(#:configure-flags `("--disable-a52" ; FIXME: reenable once available - "--disable-mmx" ; FIXME: may be enabled on x86_64 - "--disable-sse" ; 1-4, no separate options available - "--disable-neon" - "--disable-altivec" ,(string-append "LDFLAGS=-Wl,-rpath -Wl," (assoc-ref %build-inputs "ffmpeg") "/lib")))) ; needed for the tests @@ -342,20 +320,18 @@ treaming protocols.") libx11 "/include") ; to detect libx11 "--disable-tremor-internal" ; forces external libvorbis (string-append "--prefix=" out) - ;; drop special machine instructions not supported - ;; on all instances of the target - ,@(if (string-prefix? "x86_64" - (or (%current-target-system) - (%current-system))) - '() - '("--disable-3dnow" - "--disable-3dnowext" - "--disable-mmx" - "--disable-mmxext" - "--disable-sse" - "--disable-sse2")) - "--disable-ssse3" - "--disable-altivec" + ;; Enable runtime cpu detection where supported, + ;; and choose a suitable target. + ,@(match (or (%current-target-system) + (%current-system)) + ("x86_64-linux" + '("--enable-runtime-cpudetection" + "--target=x86_64-linux")) + ("i686-linux" + '("--enable-runtime-cpudetection" + "--target=i686-linux")) + ("mips64el-linux" + '("--target=mips3-linux"))) "--disable-armv5te" "--disable-armv6" "--disable-armv6t2" diff --git a/gnu/packages/xorg.scm b/gnu/packages/xorg.scm index ce07d77299..ce3c4ec2e1 100644 --- a/gnu/packages/xorg.scm +++ b/gnu/packages/xorg.scm @@ -331,6 +331,29 @@ tracking.") (license license:x11))) +;; not part of X11R7.7, required for newer versions of mesa +(define-public dri3proto + (package + (name "dri3proto") + (version "1.0") + (source + (origin + (method url-fetch) + (uri (string-append + "mirror://xorg/individual/proto/dri3proto-" + version + ".tar.bz2")) + (sha256 + (base32 + "0x609xvnl8jky5m8jdklw4nymx3irkv32w99dfd8nl800bblkgh1")))) + (build-system gnu-build-system) + (home-page "http://www.x.org/wiki/") + (synopsis "xorg implementation of the X Window System") + (description "X.org provides an implementation of the X Window System") + (license (license:x11-style "file://dri3proto.h" + "See 'dri3proto.h' in the distribution.")))) + + (define-public encodings (package (name "encodings") @@ -1521,6 +1544,28 @@ tracking.") (license license:x11))) +;; not part of X11R7.7, required for newer versions of mesa +(define-public presentproto + (package + (name "presentproto") + (version "1.0") + (source + (origin + (method url-fetch) + (uri (string-append + "mirror://xorg/individual/proto/presentproto-" + version + ".tar.bz2")) + (sha256 + (base32 + "1kir51aqg9cwazs14ivcldcn3mzadqgykc9cg87rm40zf947sb41")))) + (build-system gnu-build-system) + (home-page "http://www.x.org/wiki/") + (synopsis "xorg implementation of the X Window System") + (description "X.org provides an implementation of the X Window System") + (license (license:x11-style "file://presentproto.h" + "See 'presentproto.h' in the distribution.")))) + ;; The package is missing from X11R7.7. (define-public printproto (package @@ -1696,9 +1741,15 @@ tracking.") (build-system gnu-build-system) (inputs `(("libxkbfile" ,libxkbfile) + ("xkeyboard-config" ,xkeyboard-config) ("libx11" ,libx11))) (native-inputs `(("pkg-config" ,pkg-config))) + (arguments + `(#:configure-flags + (list (string-append "--with-xkb-config-root=" + (assoc-ref %build-inputs "xkeyboard-config") + "/share/X11/xkb")))) (home-page "http://www.x.org/wiki/") (synopsis "xorg implementation of the X Window System") (description "X.org provides an implementation of the X Window System") @@ -2170,9 +2221,15 @@ tracking.") (base32 "1ivf5n821chckrgp89mpb18zi00v1hyrkc1hr82q0x6g1kpgxq9y")))) (build-system gnu-build-system) - ;; FIXME: Add required input udev once it is available. - (inputs `(("xorg-server" ,xorg-server))) + (inputs + `(("udev" ,udev) + ("xorg-server" ,xorg-server))) (native-inputs `(("pkg-config" ,pkg-config))) + (arguments + `(#:configure-flags + (list (string-append "--with-sdkdir=" + (assoc-ref %outputs "out") + "/include/xorg")))) (home-page "http://www.x.org/wiki/") (synopsis "xorg implementation of the X Window System") (description "X.org provides an implementation of the X Window System") |