diff options
Diffstat (limited to 'gnu')
202 files changed, 9754 insertions, 43516 deletions
diff --git a/gnu/bootloader/grub.scm b/gnu/bootloader/grub.scm index b905ae360c..f69bf8ed4d 100644 --- a/gnu/bootloader/grub.scm +++ b/gnu/bootloader/grub.scm @@ -295,6 +295,33 @@ code." ((? file-system-label? label) (format #f "search --label --set ~a" (file-system-label->string label))) + ((? (lambda (device) + (and (string? device) (string-contains device ":/"))) nfs-uri) + ;; This assumes that if your root file system is on NFS, then + ;; you also want to load your grub extra files, kernel and initrd + ;; from there. + ;; + ;; We explicitly set "root=(tftp)" here even though if grub.cfg + ;; had been loaded via TFTP, Grub would have set "root=(tftp)" + ;; automatically anyway. The reason is if you have a system that + ;; used to be on NFS but now is local, root would be set to local + ;; disk. If you then selected an older system generation that is + ;; supposed to boot from network in the Grub boot menu, Grub still + ;; wouldn't load those files from network otherwise. + ;; + ;; TFTP is preferred to HTTP because it is used more widely and + ;; specified in standards more widely--especially BOOTP/DHCPv4 + ;; defines a TFTP server for DHCP option 66, but not HTTP. + ;; + ;; Note: DHCPv6 specifies option 59 to contain a boot-file-url, + ;; which can contain a HTTP or TFTP URL. + ;; + ;; Note: It is assumed that the file paths are of a similar + ;; setup on both the TFTP server and the NFS server (it is + ;; not possible to search for files on TFTP). + ;; + ;; TODO: Allow HTTP. + "set root=(tftp)") ((or #f (? string?)) #~(format #f "search --file --set ~a" #$file))))) @@ -506,6 +533,10 @@ fi~%")))) ;;; ;;; Bootloader definitions. ;;; +;;; For all these grub-bootloader variables the path to /boot/grub/grub.cfg +;;; is fixed. Inheriting and overwriting the field 'configuration-file' will +;;; break 'guix system delete-generations', 'guix system switch-generation', +;;; and 'guix system roll-back'. (define grub-bootloader (bootloader @@ -516,12 +547,12 @@ fi~%")))) (configuration-file "/boot/grub/grub.cfg") (configuration-file-generator grub-configuration-file))) -(define* grub-minimal-bootloader +(define grub-minimal-bootloader (bootloader (inherit grub-bootloader) (package grub-minimal))) -(define* grub-efi-bootloader +(define grub-efi-bootloader (bootloader (inherit grub-bootloader) (installer install-grub-efi) @@ -529,7 +560,7 @@ fi~%")))) (name 'grub-efi) (package grub-efi))) -(define* grub-mkrescue-bootloader +(define grub-mkrescue-bootloader (bootloader (inherit grub-efi-bootloader) (package grub-hybrid))) diff --git a/gnu/build/file-systems.scm b/gnu/build/file-systems.scm index 4ba1503b9f..734d648575 100644 --- a/gnu/build/file-systems.scm +++ b/gnu/build/file-systems.scm @@ -675,7 +675,8 @@ were found." (define (canonicalize-device-spec spec) "Return the device name corresponding to SPEC, which can be a <uuid>, a -<file-system-label>, or a string (typically a /dev file name)." +<file-system-label>, or a string (typically a /dev file name or an nfs-root +containing ':/')." (define max-trials ;; Number of times we retry partition label resolution, 1 second per ;; trial. Note: somebody reported a delay of 16 seconds (!) before their diff --git a/gnu/build/install.scm b/gnu/build/install.scm index 87aa5d68da..63995e1d09 100644 --- a/gnu/build/install.scm +++ b/gnu/build/install.scm @@ -18,6 +18,7 @@ ;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. (define-module (gnu build install) + #:use-module (guix build syscalls) #:use-module (guix build utils) #:use-module (guix build store-copy) #:use-module (srfi srfi-26) @@ -26,7 +27,9 @@ evaluate-populate-directive populate-root-file-system install-database-and-gc-roots - populate-single-profile-directory)) + populate-single-profile-directory + mount-cow-store + unmount-cow-store)) ;;; Commentary: ;;; @@ -229,4 +232,43 @@ This is used to create the self-contained tarballs with 'guix pack'." (_ #t))) +(define (mount-cow-store target backing-directory) + "Make the store copy-on-write, using TARGET as the backing store. This is +useful when TARGET is on a hard disk, whereas the current store is on a RAM +disk." + (define (set-store-permissions directory) + "Set the right perms on DIRECTORY to use it as the store." + (chown directory 0 30000) ;use the fixed 'guixbuild' GID + (chmod directory #o1775)) + + (let ((tmpdir (string-append target "/tmp"))) + (mkdir-p tmpdir) + (mount tmpdir "/tmp" "none" MS_BIND)) + + (let* ((rw-dir (string-append target backing-directory)) + (work-dir (string-append rw-dir "/../.overlayfs-workdir"))) + (mkdir-p rw-dir) + (mkdir-p work-dir) + (mkdir-p "/.rw-store") + (set-store-permissions rw-dir) + (set-store-permissions "/.rw-store") + + ;; Mount the overlay, then atomically make it the store. + (mount "none" "/.rw-store" "overlay" 0 + (string-append "lowerdir=" (%store-directory) "," + "upperdir=" rw-dir "," + "workdir=" work-dir)) + (mount "/.rw-store" (%store-directory) "" MS_MOVE) + (rmdir "/.rw-store"))) + +(define (unmount-cow-store target backing-directory) + "Unmount copy-on-write store." + (let ((tmp-dir "/remove")) + (mkdir-p tmp-dir) + (mount (%store-directory) tmp-dir "" MS_MOVE) + (umount tmp-dir) + (rmdir tmp-dir) + (delete-file-recursively + (string-append target backing-directory)))) + ;;; install.scm ends here diff --git a/gnu/build/linux-boot.scm b/gnu/build/linux-boot.scm index 80fe0cfb9d..32e3536039 100644 --- a/gnu/build/linux-boot.scm +++ b/gnu/build/linux-boot.scm @@ -469,9 +469,10 @@ upon error." (define (device-string->file-system-device device-string) ;; The "--root=SPEC" kernel command-line option always provides a - ;; string, but the string can represent a device, a UUID, or a - ;; label. So check for all three. + ;; string, but the string can represent a device, an nfs-root, a UUID, or a + ;; label. So check for all four. (cond ((string-prefix? "/" device-string) device-string) + ((string-contains device-string ":/") device-string) ; nfs-root ((uuid device-string) => identity) (else (file-system-label device-string)))) diff --git a/gnu/build/linux-container.scm b/gnu/build/linux-container.scm index 87695c98fd..2d4de788df 100644 --- a/gnu/build/linux-container.scm +++ b/gnu/build/linux-container.scm @@ -243,7 +243,8 @@ that host UIDs (respectively GIDs) map to in the namespace." (match (read child) ('ready (purify-environment) - (when (memq 'mnt namespaces) + (when (and (memq 'mnt namespaces) + (not (string=? root "/"))) (catch #t (lambda () (mount-file-systems root mounts diff --git a/gnu/build/secret-service.scm b/gnu/build/secret-service.scm new file mode 100644 index 0000000000..781651e90d --- /dev/null +++ b/gnu/build/secret-service.scm @@ -0,0 +1,137 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2020 Ludovic Courtès <ludo@gnu.org> +;;; Copyright © 2020 Jan (janneke) Nieuwenhuizen <janneke@gnu.org> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu build secret-service) + #:use-module (guix build utils) + + #:use-module (srfi srfi-26) + #:use-module (rnrs bytevectors) + #:use-module (ice-9 binary-ports) + #:use-module (ice-9 match) + #:use-module (ice-9 rdelim) + + #:export (secret-service-receive-secrets + secret-service-send-secrets)) + +;;; Commentary: +;;; +;;; Utility procedures for copying secrets into a VM. +;;; +;;; Code: + +(define* (secret-service-send-secrets port secret-root #:key (retry 60)) + "Copy all files under SECRET-ROOT using TCP to secret-service listening at +local PORT. If connect fails, sleep 1s and retry RETRY times." + + (define (file->file+size+mode file-name) + (let ((stat (stat file-name)) + (target (substring file-name (string-length secret-root)))) + (list target (stat:size stat) (stat:mode stat)))) + + (format (current-error-port) "sending secrets to ~a~%" port) + (let ((sock (socket AF_INET SOCK_STREAM 0)) + (addr (make-socket-address AF_INET INADDR_LOOPBACK port))) + ;; connect to wait for port + (let loop ((retry retry)) + (catch 'system-error + (cute connect sock addr) + (lambda (key . args) + (when (zero? retry) + (apply throw key args)) + (format (current-error-port) "retrying connection~%") + (sleep 1) + (loop (1- retry))))) + + (format (current-error-port) "connected! sending files in ~s %~" + secret-root) + (let* ((files (if secret-root (find-files secret-root) '())) + (files-sizes-modes (map file->file+size+mode files)) + (secrets `(secrets + (version 0) + (files ,files-sizes-modes)))) + (write secrets sock) + (for-each (compose (cute dump-port <> sock) + (cute open-input-file <>)) + files)))) + +(define (secret-service-receive-secrets port) + "Listen to local PORT and wait for a secret service client to send secrets. +Write them to the file system." + + (define (wait-for-client port) + ;; Wait for a TCP connection on PORT. Note: We cannot use the + ;; virtio-serial ports, which would be safer, because they are + ;; (presumably) unsupported on GNU/Hurd. + (let ((sock (socket AF_INET SOCK_STREAM 0))) + (bind sock AF_INET INADDR_ANY port) + (listen sock 1) + (format (current-error-port) + "waiting for secrets on port ~a...~%" + port) + (match (accept sock) + ((client . address) + (format (current-error-port) "client connection from ~a~%" + (inet-ntop (sockaddr:fam address) + (sockaddr:addr address))) + (close-port sock) + client)))) + + ;; TODO: Remove when (@ (guix build utils) dump-port) has a 'size' + ;; parameter. + (define (dump in out size) + ;; Copy SIZE bytes from IN to OUT. + (define buf-size 65536) + (define buf (make-bytevector buf-size)) + + (let loop ((left size)) + (if (<= left 0) + 0 + (let ((read (get-bytevector-n! in buf 0 (min left buf-size)))) + (if (eof-object? read) + left + (begin + (put-bytevector out buf 0 read) + (loop (- left read)))))))) + + (define (read-secrets port) + ;; Read secret files from PORT and install them. + (match (false-if-exception (read port)) + (('secrets ('version 0) + ('files ((files sizes modes) ...))) + (for-each (lambda (file size mode) + (format (current-error-port) + "installing file '~a' (~a bytes)...~%" + file size) + (mkdir-p (dirname file)) + (call-with-output-file file + (lambda (output) + (dump port output size) + (chmod file mode)))) + files sizes modes)) + (_ + (format (current-error-port) + "invalid secrets received~%") + #f))) + + (let* ((port (wait-for-client port)) + (result (read-secrets port))) + (close-port port) + result)) + +;;; secret-service.scm ends here diff --git a/gnu/build/shepherd.scm b/gnu/build/shepherd.scm index fd93e7f3f4..65141bd60f 100644 --- a/gnu/build/shepherd.scm +++ b/gnu/build/shepherd.scm @@ -20,10 +20,12 @@ #:use-module (gnu system file-systems) #:use-module (gnu build linux-container) #:use-module (guix build utils) + #:use-module (guix utils) #:use-module (srfi srfi-1) #:use-module (srfi srfi-26) #:use-module (ice-9 match) - #:export (make-forkexec-constructor/container)) + #:export (make-forkexec-constructor/container + fork+exec-command/container)) ;;; Commentary: ;;; @@ -93,7 +95,8 @@ ;; XXX: Lazy-bind the Shepherd to avoid a compile-time dependency. (module-autoload! (current-module) '(shepherd service) - '(read-pid-file exec-command %precious-signals)) + '(fork+exec-command read-pid-file exec-command + %precious-signals)) (module-autoload! (current-module) '(shepherd system) '(unblock-signals)) @@ -188,6 +191,17 @@ namespace, in addition to essential bind-mounts such /proc." (read-pid-file pid-file #:max-delay pid-file-timeout)) pid)))) +(define* (fork+exec-command/container command + #:key pid + #:allow-other-keys + #:rest args) + "This is a variant of 'fork+exec-command' procedure, that joins the +namespaces of process PID beforehand." + (container-excursion* pid + (lambda () + (apply fork+exec-command command + (strip-keyword-arguments '(#:pid) args))))) + ;; Local Variables: ;; eval: (put 'container-excursion* 'scheme-indent-function 1) ;; End: diff --git a/gnu/ci.scm b/gnu/ci.scm index af0bb66775..0ce32ef8d8 100644 --- a/gnu/ci.scm +++ b/gnu/ci.scm @@ -2,6 +2,7 @@ ;;; Copyright © 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2017 Jan Nieuwenhuizen <janneke@gnu.org> ;;; Copyright © 2018, 2019 Clément Lassieur <clement@lassieur.org> +;;; Copyright © 2020 Julien Lepiller <julien@lepiller.eu> ;;; ;;; This file is part of GNU Guix. ;;; @@ -25,6 +26,7 @@ #:use-module (guix profiles) #:use-module (guix packages) #:use-module (guix channels) + #:use-module (guix config) #:use-module (guix derivations) #:use-module (guix build-system) #:use-module (guix monads) @@ -116,7 +118,7 @@ SYSTEM." ;; Note: Don't put the '-final' package variants because (1) that's ;; implicit, and (2) they cannot be cross-built (due to the explicit input ;; chain.) - (list gcc-4.8 gcc-4.9 gcc-5 glibc binutils + (list gcc-7 gcc-8 gcc-9 gcc-10 glibc binutils gmp mpfr mpc coreutils findutils diffutils patch sed grep gawk gnu-gettext hello guile-2.0 guile-2.2 zlib gzip xz %bootstrap-binaries-tarball @@ -233,7 +235,12 @@ system.") ,(->job 'iso9660-image (build-image (image - (inherit iso9660-image) + (inherit (image-with-label + iso9660-image + (string-append "GUIX_" system "_" + (if (> (string-length %guix-version) 7) + (substring %guix-version 0 7) + %guix-version)))) (operating-system installation-os)))) ;; Only cross-compile Guix System images from x86_64-linux for now. ,@(if (string=? system "x86_64-linux") diff --git a/gnu/installer/final.scm b/gnu/installer/final.scm index 685aa81d89..fc0b7803fa 100644 --- a/gnu/installer/final.scm +++ b/gnu/installer/final.scm @@ -26,6 +26,8 @@ #:use-module (guix build syscalls) #:use-module (guix build utils) #:use-module (gnu build accounts) + #:use-module (gnu build install) + #:use-module (gnu build linux-container) #:use-module ((gnu system shadow) #:prefix sys:) #:use-module (rnrs io ports) #:use-module (srfi srfi-1) @@ -133,49 +135,32 @@ USERS." (_ #f)))))) pids))) -(define (umount-cow-store) - "Remove the store overlay and the bind-mount on /tmp created by the -cow-store service. This procedure is very fragile and a better approach would -be much appreciated." - (catch #t - (lambda () - (let ((tmp-dir "/remove")) - (syslog "Unmounting cow-store.~%") - - (mkdir-p tmp-dir) - (mount (%store-directory) tmp-dir "" MS_MOVE) - - ;; The guix-daemon has possibly opened files from the cow-store, - ;; restart it. - (restart-service 'guix-daemon) - - (syslog "Killing cow users.") - - ;; Kill all processes started while the cow-store was active (logins - ;; on other TTYs for instance). - (kill-cow-users tmp-dir) - - ;; Try to umount the store overlay. Some process such as udevd - ;; workers might still be active, so do some retries. - (let loop ((try 5)) - (syslog "Umount try ~a~%" (- 5 try)) - (sleep 1) - (let ((umounted? (false-if-exception (umount tmp-dir)))) - (if (and (not umounted?) (> try 0)) - (loop (- try 1)) - (if umounted? - (syslog "Umounted ~a successfully.~%" tmp-dir) - (syslog "Failed to umount ~a.~%" tmp-dir))))) - - (umount "/tmp"))) - (lambda args - (syslog "~a~%" args)))) +(define (call-with-mnt-container thunk) + "This is a variant of call-with-container. Run THUNK in a new container +process, within a separate MNT namespace. The container is not jailed so that +it can interact with the rest of the system." + (let ((pid (run-container "/" '() '(mnt) 1 thunk))) + ;; Catch SIGINT and kill the container process. + (sigaction SIGINT + (lambda (signum) + (false-if-exception + (kill pid SIGKILL)))) + + (match (waitpid pid) + ((_ . status) status)))) (define* (install-system locale #:key (users '())) "Create /etc/shadow and /etc/passwd on the installation target for USERS. Start COW-STORE service on target directory and launch guix install command in a subshell. LOCALE must be the locale name under which that command will run, or #f. Return #t on success and #f on failure." + (define backing-directory + ;; Sub-directory used as the backing store for copy-on-write. + "/tmp/guix-inst") + + (define (assert-exit x) + (primitive-exit (if x 0 1))) + (let* ((options (catch 'system-error (lambda () ;; If this file exists, it can provide @@ -188,7 +173,11 @@ or #f. Return #t on success and #f on failure." "--fallback") options (list (%installer-configuration-file) - (%installer-target-dir))))) + (%installer-target-dir)))) + (database-dir "/var/guix/db") + (database-file (string-append database-dir "/db.sqlite")) + (saved-database (string-append database-dir "/db.save")) + (ret #f)) (mkdir-p (%installer-target-dir)) ;; We want to initialize user passwords but we don't want to store them in @@ -198,27 +187,49 @@ or #f. Return #t on success and #f on failure." ;; passwords that we've put in there. (create-user-database users (%installer-target-dir)) - (dynamic-wind - (lambda () - (start-service 'cow-store (list (%installer-target-dir)))) - (lambda () - ;; If there are any connected clients, assume that we are running - ;; installation tests. In that case, dump the standard and error - ;; outputs to syslog. - (if (not (null? (current-clients))) - (with-output-to-file "/dev/console" - (lambda () - (with-error-to-file "/dev/console" - (lambda () - (setvbuf (current-output-port) 'none) - (setvbuf (current-error-port) 'none) - (run-command install-command #:locale locale))))) - (run-command install-command #:locale locale))) - (lambda () - (stop-service 'cow-store) - ;; Remove the store overlay created at cow-store service start. - ;; Failing to do that will result in further umount calls to fail - ;; because the target device is seen as busy. See: - ;; https://lists.gnu.org/archive/html/guix-devel/2018-12/msg00161.html. - (umount-cow-store) - #f)))) + ;; When the store overlay is mounted, other processes such as kmscon, udev + ;; and guix-daemon may open files from the store, preventing the + ;; underlying install support from being umounted. See: + ;; https://lists.gnu.org/archive/html/guix-devel/2018-12/msg00161.html. + ;; + ;; To avoid this situation, mount the store overlay inside a container, + ;; and run the installation from within that container. + (zero? + (call-with-mnt-container + (lambda () + (dynamic-wind + (lambda () + ;; Save the database, so that it can be restored once the + ;; cow-store is umounted. + (copy-file database-file saved-database) + (mount-cow-store (%installer-target-dir) backing-directory)) + (lambda () + ;; We need to drag the guix-daemon to the container MNT + ;; namespace, so that it can operate on the cow-store. + (stop-service 'guix-daemon) + (start-service 'guix-daemon (list (number->string (getpid)))) + + (setvbuf (current-output-port) 'none) + (setvbuf (current-error-port) 'none) + + ;; If there are any connected clients, assume that we are running + ;; installation tests. In that case, dump the standard and error + ;; outputs to syslog. + (set! ret + (if (not (null? (current-clients))) + (with-output-to-file "/dev/console" + (lambda () + (with-error-to-file "/dev/console" + (lambda () + (run-command install-command + #:locale locale))))) + (run-command install-command #:locale locale)))) + (lambda () + ;; Restart guix-daemon so that it does no keep the MNT namespace + ;; alive. + (restart-service 'guix-daemon) + (copy-file saved-database database-file) + + ;; Finally umount the cow-store and exit the container. + (unmount-cow-store (%installer-target-dir) backing-directory) + (assert-exit ret)))))))) diff --git a/gnu/installer/newt/final.scm b/gnu/installer/newt/final.scm index fa8d6fea71..89684c4d8a 100644 --- a/gnu/installer/newt/final.scm +++ b/gnu/installer/newt/final.scm @@ -102,13 +102,6 @@ a specific step, or restart the installer.")) #:key (users '())) (clear-screen) (newt-suspend) - ;; XXX: Force loading 'bold' font files before mouting the - ;; cow-store. Otherwise, if the file is loaded by kmscon after the cow-store - ;; in mounted, it will be necessary to kill kmscon to umount to cow-store. - (display - (colorize-string - (format #f (G_ "Installing Guix System ...~%")) - (color BOLD))) (let ((install-ok? (install-system locale #:users users))) (newt-resume) install-ok?)) diff --git a/gnu/local.mk b/gnu/local.mk index 9bb0696b2b..8c93e19b72 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -36,6 +36,7 @@ # Copyright © 2020 Jan Wielkiewicz <tona_kosmicznego_smiecia@interia.pl> # Copyright © 2020 Brice Waegeneire <brice@waegenei.re> # Copyright © 2020 Tanguy Le Carrour <tanguy@bioneland.org> +# Copyright © 2020 Martin Becze <mjbecze@riseup.net> # # This file is part of GNU Guix. # @@ -342,6 +343,7 @@ GNU_SYSTEM_MODULES = \ %D%/packages/lout.scm \ %D%/packages/logging.scm \ %D%/packages/logo.scm \ + %D%/packages/loko.scm \ %D%/packages/lolcode.scm \ %D%/packages/lsof.scm \ %D%/packages/lua.scm \ @@ -414,6 +416,7 @@ GNU_SYSTEM_MODULES = \ %D%/packages/package-management.scm \ %D%/packages/pantheon.scm \ %D%/packages/parallel.scm \ + %D%/packages/pascal.scm \ %D%/packages/password-utils.scm \ %D%/packages/patchutils.scm \ %D%/packages/pciutils.scm \ @@ -429,6 +432,7 @@ GNU_SYSTEM_MODULES = \ %D%/packages/photo.scm \ %D%/packages/phabricator.scm \ %D%/packages/php.scm \ + %D%/packages/piet.scm \ %D%/packages/pkg-config.scm \ %D%/packages/plotutils.scm \ %D%/packages/poedit.scm \ @@ -658,6 +662,7 @@ GNU_SYSTEM_MODULES = \ %D%/build/linux-initrd.scm \ %D%/build/linux-modules.scm \ %D%/build/marionette.scm \ + %D%/build/secret-service.scm \ %D%/build/vm.scm \ \ %D%/tests.scm \ @@ -919,7 +924,6 @@ dist_patch_DATA = \ %D%/packages/patches/elixir-path-length.patch \ %D%/packages/patches/elm-compiler-disable-reactor.patch \ %D%/packages/patches/elm-compiler-fix-map-key.patch \ - %D%/packages/patches/emacs27-exec-path.patch \ %D%/packages/patches/emacs-exec-path.patch \ %D%/packages/patches/emacs-exwm-fix-fullscreen-states.patch \ %D%/packages/patches/emacs-fix-scheme-indent-function.patch \ @@ -964,6 +968,7 @@ dist_patch_DATA = \ %D%/packages/patches/foomatic-filters-CVE-2015-8327.patch \ %D%/packages/patches/foomatic-filters-CVE-2015-8560.patch \ %D%/packages/patches/fontconfig-hurd-path-max.patch \ + %D%/packages/patches/fpc-reproducibility.patch \ %D%/packages/patches/freedink-engine-fix-sdl-hints.patch \ %D%/packages/patches/freeimage-unbundle.patch \ %D%/packages/patches/fuse-overlapping-headers.patch \ @@ -1015,6 +1020,7 @@ dist_patch_DATA = \ %D%/packages/patches/gd-brect-bounds.patch \ %D%/packages/patches/gdb-hurd.patch \ %D%/packages/patches/gdm-default-session.patch \ + %D%/packages/patches/genimage-signedness.patch \ %D%/packages/patches/geoclue-config.patch \ %D%/packages/patches/ghc-8.0-fall-back-to-madv_dontneed.patch \ %D%/packages/patches/ghc-testsuite-dlopen-pie.patch \ @@ -1073,6 +1079,7 @@ dist_patch_DATA = \ %D%/packages/patches/gobject-introspection-girepository.patch \ %D%/packages/patches/go-skip-gc-test.patch \ %D%/packages/patches/gpm-glibc-2.26.patch \ + %D%/packages/patches/gpodder-disable-updater.patch \ %D%/packages/patches/gpsbabel-minizip.patch \ %D%/packages/patches/gpsbabel-qstring.patch \ %D%/packages/patches/grantlee-merge-theme-dirs.patch \ @@ -1521,6 +1528,7 @@ dist_patch_DATA = \ %D%/packages/patches/readline-link-ncurses.patch \ %D%/packages/patches/readline-6.2-CVE-2014-2524.patch \ %D%/packages/patches/reposurgeon-add-missing-docbook-files.patch \ + %D%/packages/patches/r-httpuv-1.5.4-unvendor-libuv.patch \ %D%/packages/patches/ri-li-modernize_cpp.patch \ %D%/packages/patches/ripperx-missing-file.patch \ %D%/packages/patches/rpcbind-CVE-2017-8779.patch \ @@ -1566,9 +1574,9 @@ dist_patch_DATA = \ %D%/packages/patches/slim-login.patch \ %D%/packages/patches/slim-display.patch \ %D%/packages/patches/snappy-add-O2-flag-in-CmakeLists.txt.patch \ - %D%/packages/patches/sooperlooper-build-with-wx-30.patch \ %D%/packages/patches/sphinxbase-fix-doxygen.patch \ %D%/packages/patches/sssd-fix-samba.patch \ + %D%/packages/patches/sssd-system-directories.patch \ %D%/packages/patches/steghide-fixes.patch \ %D%/packages/patches/suitesparse-mongoose-cmake.patch \ %D%/packages/patches/superlu-dist-awpm-grid.patch \ @@ -1608,7 +1616,6 @@ dist_patch_DATA = \ %D%/packages/patches/tk-find-library.patch \ %D%/packages/patches/transcode-ffmpeg.patch \ %D%/packages/patches/ttf2eot-cstddef.patch \ - %D%/packages/patches/ttfautohint-source-date-epoch.patch \ %D%/packages/patches/tomb-fix-errors-on-open.patch \ %D%/packages/patches/tup-unbundle-dependencies.patch \ %D%/packages/patches/tuxpaint-stamps-path.patch \ @@ -1638,6 +1645,7 @@ dist_patch_DATA = \ %D%/packages/patches/vboot-utils-fix-format-load-address.patch \ %D%/packages/patches/vboot-utils-fix-tests-show-contents.patch \ %D%/packages/patches/vboot-utils-skip-test-workbuf.patch \ + %D%/packages/patches/vcflib-use-shared-libraries.patch \ %D%/packages/patches/vigra-python-compat.patch \ %D%/packages/patches/vinagre-newer-freerdp.patch \ %D%/packages/patches/vinagre-newer-rdp-parameters.patch \ @@ -1653,6 +1661,7 @@ dist_patch_DATA = \ %D%/packages/patches/webkitgtk-share-store.patch \ %D%/packages/patches/webkitgtk-bind-all-fonts.patch \ %D%/packages/patches/websocketpp-fix-for-cmake-3.15.patch \ + %D%/packages/patches/wgetpaste-update-bpaste.patch \ %D%/packages/patches/wicd-bitrate-none-fix.patch \ %D%/packages/patches/wicd-get-selected-profile-fix.patch \ %D%/packages/patches/wicd-urwid-1.3.patch \ @@ -1668,12 +1677,11 @@ dist_patch_DATA = \ %D%/packages/patches/xf86-video-mach64-glibc-2.20.patch \ %D%/packages/patches/xf86-video-savage-xorg-compat.patch \ %D%/packages/patches/xf86-video-siliconmotion-fix-ftbfs.patch \ - %D%/packages/patches/xf86-video-sis-xorg-compat.patch \ %D%/packages/patches/xf86-video-tga-remove-mibstore.patch \ %D%/packages/patches/xf86-video-voodoo-pcitag.patch \ %D%/packages/patches/xfce4-panel-plugins.patch \ %D%/packages/patches/xfce4-settings-defaults.patch \ - %D%/packages/patches/xorg-server-CVE-2020-14347.patch \ + %D%/packages/patches/xmonad-dynamic-linking.patch \ %D%/packages/patches/xplanet-1.3.1-cxx11-eof.patch \ %D%/packages/patches/xplanet-1.3.1-libdisplay_DisplayOutput.cpp.patch \ %D%/packages/patches/xplanet-1.3.1-libimage_gif.c.patch \ diff --git a/gnu/machine/ssh.scm b/gnu/machine/ssh.scm index 4e31baa4b9..35b42add48 100644 --- a/gnu/machine/ssh.scm +++ b/gnu/machine/ssh.scm @@ -172,6 +172,8 @@ exist on the machine." (and (file-system-mount? fs) (not (member (file-system-type fs) %pseudo-file-system-types)) + ;; Don't try to validate network file systems. + (not (string-prefix? "nfs" (file-system-type fs))) (not (memq 'bind-mount (file-system-flags fs))))) (operating-system-file-systems (machine-operating-system machine)))) diff --git a/gnu/packages/admin.scm b/gnu/packages/admin.scm index 1641bdf99d..9c76d50bfd 100644 --- a/gnu/packages/admin.scm +++ b/gnu/packages/admin.scm @@ -443,7 +443,7 @@ graphs and can export its output to different formats.") (define-public facter (package (name "facter") - (version "4.0.34") + (version "4.0.35") (source (origin (method git-fetch) (uri (git-reference @@ -452,7 +452,7 @@ graphs and can export its output to different formats.") (file-name (git-file-name name version)) (sha256 (base32 - "19lcmmcnxkbirvh5bn5xa9a99z48zmb1b8845cp5r598y019gxqp")))) + "1f203g2hp96cp8w4x1myhqdj5j09z9s23kylwkrxr69fjhn0vhnb")))) (build-system ruby-build-system) (arguments `(#:phases @@ -514,20 +514,24 @@ or via the @code{facter} Ruby library.") (define-public htop (package (name "htop") - (version "2.2.0") - (source (origin - (method url-fetch) - (uri (string-append "http://hisham.hm/htop/releases/" - version "/htop-" version ".tar.gz")) - (sha256 - (base32 - "0mrwpb3cpn3ai7ar33m31yklj64c3pp576vh1naqff6f21pq5mnr")))) + (version "3.0.1") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/htop-dev/htop") + (commit version))) + (sha256 + (base32 "0kjlphdvwwbj91kk91s4ksc954d3c2bznddzx2223jmb1bn9rcsa")) + (file-name (git-file-name name version)))) (build-system gnu-build-system) (inputs `(("ncurses" ,ncurses))) (native-inputs - `(("python" ,python-wrapper))) ;for scripts/MakeHeader.py - (home-page "https://hisham.hm/htop/") + `(("autoconf" ,autoconf) + ("automake" ,automake) + ("python" ,python-wrapper))) ; for scripts/MakeHeader.py + (home-page "https://htop.dev") (synopsis "Interactive process viewer") (description "This is htop, an interactive process viewer. It is a text-mode @@ -1048,10 +1052,10 @@ connection alive.") ;; if finds all the programs it needs. (let* ((out (assoc-ref outputs "out")) (libexec (string-append out "/libexec")) - (coreutils (assoc-ref inputs "coreutils")) + (coreutils (assoc-ref inputs "coreutils*")) (inetutils (assoc-ref inputs "inetutils")) (net-tools (assoc-ref inputs "net-tools")) - (sed (assoc-ref inputs "sed"))) + (sed (assoc-ref inputs "sed*"))) (substitute* "client/scripts/linux" (("/sbin/ip") (string-append (assoc-ref inputs "iproute") @@ -1091,12 +1095,8 @@ connection alive.") (base32 "1j9a4r83a77mp8k1y8z524c9rzdqgd8rzwczd6zwmw86a00xiimg")))) - ;; When cross-compiling, we need the cross Coreutils and sed. - ;; Otherwise just use those from %FINAL-INPUTS. - ,@(if (%current-target-system) - `(("coreutils" ,coreutils) - ("sed" ,sed)) - '()))) + ("coreutils*" ,coreutils) + ("sed*" ,sed))) (home-page "https://www.isc.org/products/DHCP/") (synopsis "Dynamic Host Configuration Protocol (DHCP) tools") @@ -1375,10 +1375,11 @@ at once based on a Perl regular expression.") "packdir=\"/var/log\"")) #t)) (add-before 'install 'tweak-rc-weekly - (lambda _ + (lambda* (#:key inputs #:allow-other-keys) (substitute* "rc/weekly" (("/bin/kill") - (which "kill")) + (string-append (assoc-ref inputs "coreutils*") + "/bin/kill")) (("syslogd\\.pid") ;; The file is called 'syslog.pid' (no 'd'). "syslog.pid")) @@ -1389,6 +1390,7 @@ at once based on a Perl regular expression.") (native-inputs `(("texinfo" ,texinfo) ("automake" ,automake) ("util-linux" ,util-linux))) ; for 'cal' + (inputs `(("coreutils*" ,coreutils))) (home-page "https://www.gnu.org/software/rottlog/") (synopsis "Log rotation and management") (description @@ -2085,7 +2087,7 @@ track changes in important system configuration files.") (define-public libcap-ng (package (name "libcap-ng") - (version "0.7.11") + (version "0.8") (source (origin (method url-fetch) (uri (string-append @@ -2093,7 +2095,7 @@ track changes in important system configuration files.") version ".tar.gz")) (sha256 (base32 - "1s8akhnnazk0b5c6z5i3x54rjb26p8pz2wdl1m21ml3231qmr0c5")))) + "08cy59iassiwbmfxa5v0kb374r80290vv32f5q1mnip11av26kgi")))) (build-system gnu-build-system) (arguments `(#:configure-flags @@ -2137,24 +2139,19 @@ degradation and failure.") (define-public fdupes (package (name "fdupes") - (version "1.6.1") + (version "2.1.2") (source (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/adrianlopezroche/fdupes") - (commit (string-append "v" version)))) - (file-name (git-file-name name version)) + (method url-fetch) + (uri (string-append "https://github.com/adrianlopezroche/fdupes/" + "releases/download/v" version "/" + "fdupes-" version ".tar.gz")) (sha256 - (base32 "19b6vqblddaw8ccw4sn0qsqzbswlhrz8ia6n4m3hymvcxn8skpz9")))) + (base32 "1g9p50xhi2sp0hqxml4w2k0kq9jv988q2yxm347z5349dlxvap6d")))) (build-system gnu-build-system) - (arguments - '(#:phases (modify-phases %standard-phases - (delete 'configure)) - #:tests? #f ; no 'check' target - #:make-flags (list "CC=gcc" - (string-append "PREFIX=" - (assoc-ref %outputs "out"))))) + (inputs + `(("ncurses" ,ncurses) + ("pcre2" ,pcre2))) (home-page "https://github.com/adrianlopezroche/fdupes") (synopsis "Identify duplicate files") (description @@ -3598,7 +3595,7 @@ Python loading in HPC environments.") (let ((real-name "inxi")) (package (name "inxi-minimal") - (version "3.1.05-2") + (version "3.1.06-1") (source (origin (method git-fetch) @@ -3607,7 +3604,7 @@ Python loading in HPC environments.") (commit version))) (file-name (git-file-name real-name version)) (sha256 - (base32 "1a7nl2wk49yz5hcrph692xh5phv1mdg1m5cbvgv3ya12c6r32pa2")))) + (base32 "0h65n03q9kdsv0i1q5f88i11iv79ca7fqq97rdkzkmiqb4whhnm2")))) (build-system trivial-build-system) (inputs `(("bash" ,bash-minimal) diff --git a/gnu/packages/algebra.scm b/gnu/packages/algebra.scm index 683a2f49b4..318d653618 100644 --- a/gnu/packages/algebra.scm +++ b/gnu/packages/algebra.scm @@ -1118,17 +1118,17 @@ xtensor provides: (define-public gap (package (name "gap") - (version "4.10.2") + (version "4.11.0") (source (origin (method url-fetch) - (uri (string-append "https://www.gap-system.org/pub/gap/gap-" + (uri (string-append "https://files.gap-system.org/gap-" (version-major+minor version) "/tar.bz2/gap-" version ".tar.bz2")) (sha256 - (base32 "0cp6ddk0469zzv1m1vair6gm27ic6c5m77ri8rn0znq3gaps6x94")) + (base32 "00l6hvy4iggnlrib4vp805sxdm3j7n3hzpv5zs9hbiiavh80l1xz")) (modules '((guix build utils) (ice-9 ftw) (srfi srfi-1))) (snippet '(begin @@ -1140,41 +1140,46 @@ xtensor provides: ;; FIXME: This might be fixed in the next release, see ;; https://github.com/gap-system/gap/issues/3292 (delete-file "tst/testinstall/dir.tst") - ;; Delete all packages except for a fixed list. + ;; Delete all packages except for a fixed list, + ;; given by their names up to version numbers. (with-directory-excursion "pkg" (for-each delete-file-recursively - (lset-difference string=? (scandir ".") + (lset-difference + (lambda (all keep) (string-prefix? keep all)) + (scandir ".") '("." ".." ;; Necessary packages. - "GAPDoc-1.6.2" - "primgrp-3.3.2" - "SmallGrp-1.3" ; artistic2.0 - "transgrp" ; artistic2.0 for data, - ; gpl2 or gpl3 for code - ;; Recommanded package. - "io-4.5.4" ; gpl3+ + "GAPDoc-" + "primgrp-" + "SmallGrp-" ; artistic2.0 + "transgrp" ; artistic2.0 for data, + ; gpl2 or gpl3 for code + ;; Recommended package. + "io-" ; gpl3+ ;; Optional packages, searched for at start, ;; and their depedencies. - "alnuth-3.1.0" - "autpgrp-1.10" - "crisp-1.4.4" ; bsd-2 - "ctbllib" ; gpl3+ according to doc/chap0.txt - "FactInt-1.6.2" + "alnuth-" + "autpgrp-" + "crisp-" ; bsd-2 + "ctbllib" ; gpl3+, clarified in the next release; + ; see + ; http://www.math.rwth-aachen.de/~Thomas.Breuer/ctbllib/README.md + "FactInt-" "fga" - "irredsol-1.4" ; bsd-2 - "laguna-3.9.2" - "polenta-1.3.8" - "polycyclic-2.14" - "radiroot-2.8" - "resclasses-4.7.1" - "sophus-1.24" - "tomlib-1.2.7" ; gpl2+, clarified in the git repository - ; and the next release - "utils-0.59")))) + "irredsol-" ; bsd-2 + "laguna-" + "polenta-" + "polycyclic-" + "radiroot-" + "resclasses-" + "sophus-" + "tomlib-" + "utils-")))) #t)))) (build-system gnu-build-system) (inputs `(("gmp" ,gmp) + ("readline" ,readline) ("zlib" ,zlib))) (arguments `(#:modules ((ice-9 ftw) @@ -1201,15 +1206,14 @@ xtensor provides: (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) - (lib (string-append out "/lib")) (prog (string-append bin "/gap")) (prog-real (string-append bin "/.gap-real")) - (share (string-append out "/share/gap")) - (include (string-append out "/include/gap")) - (include-hpc (string-append include "/hpc"))) + (share (string-append out "/share/gap"))) ;; Install only the gap binary; the gac compiler is left ;; for maybe later. "Wrap" it in a shell script that calls ;; the binary with the correct parameter. + ;; The make target install-bin is supposed to do that, but + ;; is not currently working. (mkdir-p bin) (copy-file "gap" prog-real) (call-with-output-file prog @@ -1220,52 +1224,18 @@ xtensor provides: prog-real share))) (chmod prog #o755) - ;; Install the headers, which are needed by Sage. The - ;; Makefile target "install-headers" was available in - ;; gap-4.10.0, but has been commented out in gap-4.10.1. - (mkdir-p include-hpc) - (install-file "gen/config.h" include) - (let ((file-name-predicate-without-stat - (lambda (regex) - (cut (file-name-predicate regex) <> #f)))) - (with-directory-excursion "src" - (for-each - (cut install-file <> include) - (scandir "." - (file-name-predicate-without-stat ".*\\.h$")))) - (with-directory-excursion "src/hpc" - (for-each - (cut install-file <> include-hpc) - (scandir "." - (file-name-predicate-without-stat ".*\\.h$"))))) - ;; Install the library, which is needed by Sage. The - ;; Makefile target "install-libgap" was available in - ;; gap-4.10.0, but has been commented out in gap-4.10.1. - ;; Compared to the Makefile, which used libtool, the - ;; following approach of copying files and making symlinks - ;; is rather pedestrian. There is hope that some later - ;; version of gap reinstates and completes the install - ;; targets. - (invoke "make" "libgap.la") - (install-file "libgap.la" lib) - (install-file ".libs/libgap.so.0.0.0" lib) - (symlink "libgap.so.0.0.0" (string-append lib "/libgap.so")) - (symlink "libgap.so.0.0.0" (string-append lib "/libgap.so.0")) - ;; Install a certain number of files and directories to - ;; SHARE, where the wrapped shell script expects them. + ;; Install the headers and library, which are needed by Sage. + (invoke "make" "install-headers") + (invoke "make" "install-libgap") ;; Remove information on the build directory from sysinfo.gap. (substitute* "sysinfo.gap" (("GAP_BIN_DIR=\".*\"") "GAP_BIN_DIR=\"\"") (("GAP_LIB_DIR=\".*\"") "GAP_LIB_DIR=\"\"") (("GAP_CPPFLAGS=\".*\"") "GAP_CPPFLAGS=\"\"")) - (install-file "sysinfo.gap" share) - (copy-recursively "grp" (string-append share "/grp")) - (copy-recursively "pkg" (string-append share "/pkg")) - ;; The following is not the C library libgap.so, but a - ;; library of GAP code. - (copy-recursively "lib" (string-append share "/lib")) - ;; The gap binary looks for documentation inside SHARE. - (copy-recursively "doc" (string-append share "/doc"))) + (invoke "make" "install-gaproot") + ;; Copy the directory of compiled packages; the make target + ;; install-pkg is currently empty. + (copy-recursively "pkg" (string-append share "/pkg"))) #t))))) (home-page "https://www.gap-system.org/") (synopsis diff --git a/gnu/packages/android.scm b/gnu/packages/android.scm index 3c3a9cd594..eb538f6540 100644 --- a/gnu/packages/android.scm +++ b/gnu/packages/android.scm @@ -7,9 +7,10 @@ ;;; Copyright © 2017 Maxim Cournoyer <maxim.cournoyer@gmail.com> ;;; Copyright © 2018, 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2018 Efraim Flashner <efraim@flashner.co.il> -;;; Copyright © 2019 Andreas Enge <andreas@enge.fr> +;;; Copyright © 2019, 2020 Andreas Enge <andreas@enge.fr> ;;; Copyright © 2019 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2020 Maxim Cournoyer <maxim.cournoyer@gmail.com> +;;; Copyright © 2020 Sergey Trofimov <sarg@sarg.org.ru> ;;; ;;; This file is part of GNU Guix. ;;; @@ -30,8 +31,9 @@ #:use-module (guix packages) #:use-module (guix download) #:use-module (guix git-download) - #:use-module (guix build-system gnu) #:use-module (guix build-system android-ndk) + #:use-module (guix build-system gnu) + #:use-module (guix build-system go) #:use-module (guix build-system python) #:use-module (guix build-system trivial) #:use-module ((guix licenses) #:prefix license:) @@ -41,6 +43,7 @@ #:use-module (gnu packages docker) #:use-module (gnu packages gcc) #:use-module (gnu packages gnupg) + #:use-module (gnu packages golang) #:use-module (gnu packages java) #:use-module (gnu packages linux) #:use-module (gnu packages pcre) @@ -916,14 +919,14 @@ useful for reverse engineering, analysis of Android applications and more.") (define-public fdroidserver (package (name "fdroidserver") - (version "1.1.1") + (version "1.1.9") (source (origin (method url-fetch) (uri (pypi-uri "fdroidserver" version)) (sha256 (base32 - "0fp7q8faicx6i6wxm717qqaham3jpilb23mvynpz6v73z7hm6wcg")))) + "0m07f791z45w7r2dzx4yb6s54b3c3wykm3w9hn25p2jcyax082a2")))) (build-system python-build-system) (arguments `(#:phases @@ -931,14 +934,20 @@ useful for reverse engineering, analysis of Android applications and more.") (add-after 'unpack 'fix-versioning (lambda _ (substitute* "setup.py" - (("0.2.1") ,(package-version python-pyasn1-modules))) + (("0.2.1") ,(package-version python-pyasn1-modules)) + ;; The dependency on docker has been removed upstream by + ;; a fairly large patch: + ;; https://gitlab.com/fdroid/fdroidserver/-/commit/89614851250c79a05db84070feca6dea033af334 + ;; that is not in a release yet. It appears we can compile with + ;; a newer version. + (("docker-py >= 1.9, < 2.0") "docker >= 1.9")) #t))))) (propagated-inputs `(("python-androguard" ,python-androguard) ("python-apache-libcloud" ,python-apache-libcloud) ("python-clint" ,python-clint) ("python-defusedxml" ,python-defusedxml) - ("python-docker-py" ,python-docker-py) + ("python-docker" ,python-docker) ("python-gitpython" ,python-gitpython) ("python-mwclient" ,python-mwclient) ("python-paramiko" ,python-paramiko) @@ -966,6 +975,36 @@ publishing, or to assist in creating, testing and submitting metadata to the main repository.") (license license:agpl3+))) +(define-public fdroidcl + (package + (name "fdroidcl") + (version "0.5.0") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/mvdan/fdroidcl") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1rxcdyy2j34z0ql9d62w7ivsch9xihjnpb1z9kgy9q46vl8zhhy0")))) + (build-system go-build-system) + (arguments + `(#:import-path "mvdan.cc/fdroidcl" + #:tests? #f ; TODO: Inputs missing. + #:install-source? #f)) + (inputs + `(("go-github-com-kr-pretty" ,go-github-com-kr-pretty))) + ;(native-inputs + ; `(("go-github-com-rogpeppe-go-internal-testscript" + ; ,go-github-com-rogpeppe-go-internal-testscript))) + (synopsis "F-Droid desktop client") + (description + "While the Android client integrates with the system with regular update +checks and notifications, this is a simple command line client that talks to +connected devices via ADB.") + (home-page "https://github.com/mvdan/fdroidcl") + (license license:bsd-3))) + (define-public enjarify (package (name "enjarify") diff --git a/gnu/packages/assembly.scm b/gnu/packages/assembly.scm index 6587dc5aa2..12954c9c1f 100644 --- a/gnu/packages/assembly.scm +++ b/gnu/packages/assembly.scm @@ -151,14 +151,14 @@ to the clients.") (define-public fasm (package (name "fasm") - (version "1.73.24") + (version "1.73.25") (source (origin (method url-fetch) (uri (string-append "https://flatassembler.net/fasm-" version ".tgz")) (sha256 - (base32 "142vxhs8mh8isvlzq7ir0asmqda410phzxmk9gk9b43dldskkj7k")))) + (base32 "0k3h61mfwslyb34kf4dnapfwl8jxlmrp4dv666wc057hkj047knn")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no tests exist diff --git a/gnu/packages/astronomy.scm b/gnu/packages/astronomy.scm index f134f0800f..785d281887 100644 --- a/gnu/packages/astronomy.scm +++ b/gnu/packages/astronomy.scm @@ -128,7 +128,7 @@ header.") (define-public gnuastro (package (name "gnuastro") - (version "0.12") + (version "0.13") (source (origin (method url-fetch) @@ -136,7 +136,7 @@ header.") version ".tar.lz")) (sha256 (base32 - "0ypk1c72q778cixfa52vjxzbd5m4qc6hfjgnipy16sfa7mnspmyf")))) + "07di6zx2irc5q0zyymx2951ydzxdfjmzd3az5qnk67ncf3hknvj5")))) (build-system gnu-build-system) (arguments '(#:configure-flags '("--disable-static"))) diff --git a/gnu/packages/audio.scm b/gnu/packages/audio.scm index 631b935f5e..38ee4f8bcc 100644 --- a/gnu/packages/audio.scm +++ b/gnu/packages/audio.scm @@ -108,6 +108,7 @@ #:use-module (gnu packages valgrind) #:use-module (gnu packages video) #:use-module (gnu packages vim) ;xxd + #:use-module (gnu packages web) #:use-module (gnu packages webkit) #:use-module (gnu packages wxwidgets) #:use-module (gnu packages xiph) @@ -298,7 +299,7 @@ Linux kernel.") (define-public libopenmpt (package (name "libopenmpt") - (version "0.5.1") + (version "0.5.2") (source (origin (method url-fetch) @@ -306,8 +307,20 @@ Linux kernel.") (string-append "https://download.openmpt.org/archive/libopenmpt/src/" "libopenmpt-" version "+release.autotools.tar.gz")) (sha256 - (base32 "1vpalfsrkbx4vyrh1qy564lr91jwdxlbjivv5gzf8zcywxasf0xa")))) + (base32 "1cwpc4j90dpxa2siia68rg9qwwm2xk6bhxnslfjj364507jy6s4l")))) (build-system gnu-build-system) + (arguments + `(#:configure-flags + (list (string-append "--docdir=" (assoc-ref %outputs "out") + "/share/doc/" ,name "-" ,version)) + #:phases + (modify-phases %standard-phases + (add-after 'install 'delete-static-libraries + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (lib (string-append out "/lib"))) + (for-each delete-file (find-files lib "\\.a$")) + #t)))))) (native-inputs `(("doxygen" ,doxygen) ("perl" ,perl) @@ -1810,7 +1823,7 @@ patches that can be used with softsynths such as Timidity and WildMidi.") (define-public guitarix (package (name "guitarix") - (version "0.38.1") + (version "0.41.0") (source (origin (method url-fetch) (uri (string-append @@ -1818,28 +1831,14 @@ patches that can be used with softsynths such as Timidity and WildMidi.") version ".tar.xz")) (sha256 (base32 - "0bw7xnrx062nwb1bfj9x660h7069ncmz77szcs8icpqxrvhs7z80")))) + "0qsfbyrrpb3bbdyq68k28mjql7kglxh8nqcw9jvja28x6x9ik5a0")))) (build-system waf-build-system) (arguments `(#:tests? #f ; no "check" target - #:python ,python-2 #:configure-flags (list ;; Add the output lib directory to the RUNPATH. - (string-append "--ldflags=-Wl,-rpath=" %output "/lib")) - #:phases - (modify-phases %standard-phases - (add-after 'unpack 'fix-boost-includes - (lambda _ - (substitute* "src/headers/gx_internal_plugins.h" - (("namespace gx_jack" m) - (string-append "#include <boost/noncopyable.hpp>\n" m))) - (substitute* '("src/headers/gx_system.h" - "src/headers/gx_parameter.h" - "src/headers/gx_json.h") - (("namespace gx_system" m) - (string-append "#include <boost/noncopyable.hpp>\n" m))) - #t))))) + (string-append "--ldflags=-Wl,-rpath=" %output "/lib")))) (inputs `(("libsndfile" ,libsndfile) ("boost" ,boost) @@ -1850,8 +1849,8 @@ patches that can be used with softsynths such as Timidity and WildMidi.") ("lilv" ,lilv) ("ladspa" ,ladspa) ("jack" ,jack-1) - ("gtkmm" ,gtkmm-2) - ("gtk+" ,gtk+-2) + ("gtkmm" ,gtkmm) + ("gtk+" ,gtk+) ("fftwf" ,fftwf) ("lrdf" ,lrdf) ("zita-resampler" ,zita-resampler) @@ -1861,7 +1860,8 @@ patches that can be used with softsynths such as Timidity and WildMidi.") ("faust" ,faust) ("intltool" ,intltool) ("gettext" ,gettext-minimal) - ("pkg-config" ,pkg-config))) + ("pkg-config" ,pkg-config) + ("sassc" ,sassc))) (native-search-paths (list (search-path-specification (variable "LV2_PATH") @@ -4013,14 +4013,14 @@ on the ALSA software PCM plugin.") (define-public snd (package (name "snd") - (version "20.6") + (version "20.7") (source (origin (method url-fetch) (uri (string-append "ftp://ccrma-ftp.stanford.edu/pub/Lisp/" "snd-" version ".tar.gz")) (sha256 (base32 - "1h4dsq5xcvwjbnayhn719cln0lg199w3xm59sl9d2jz8bq78gqgj")))) + "1kd422krz8ln4m8g3p14wfplcq8lgpzly9297rpbvyc94dc6sdwj")))) (build-system glib-or-gtk-build-system) (arguments `(#:tests? #f ; no tests @@ -4467,7 +4467,7 @@ supports both of ID3v1/v2 and APEv2 tags.") (define-public redkite (package (name "redkite") - (version "0.8.1") + (version "1.0.3") (source (origin (method git-fetch) @@ -4476,7 +4476,7 @@ supports both of ID3v1/v2 and APEv2 tags.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "17kv2jc4jvn3sdicz3sf8dnf25wbvv7ijzkr0mm0sbrrjz6vrwz0")))) + (base32 "1m2db7c791fi33snkjwnvlxapmf879g5r8azlkx7sr6vp2s0jq2k")))) (build-system cmake-build-system) (arguments `(#:tests? #f)) ;no tests included @@ -4610,7 +4610,7 @@ in the package.") (define-public libaudec (package (name "libaudec") - (version "0.2.2") + (version "0.2.3") (source (origin (method git-fetch) @@ -4620,14 +4620,14 @@ in the package.") (file-name (git-file-name name version)) (sha256 (base32 - "04mpmfmqc43asw0m3zxhb6jj4qms7x4jw7mx4xb1d3lh16xllniz")))) + "04hw61db8wscj28qjyiaiafx8xl87njgmvqszxyhs4gmg8xgjip7")))) (build-system meson-build-system) (arguments - `(#:configure-flags `("-Denable_tests=true -Denable_ffmpeg=true"))) + ;; Compile tests. + `(#:configure-flags `("-Dtests=true"))) (inputs `(("libsamplerate" ,libsamplerate) - ("libsndfile" ,libsndfile) - ("ffmpeg" ,ffmpeg))) + ("libsndfile" ,libsndfile))) (native-inputs `(("pkg-config", pkg-config))) (synopsis "Library for reading and resampling audio files") @@ -4640,7 +4640,7 @@ libsamplerate for reading and resampling audio files, based on Robin Gareus' (define-public lv2lint (package (name "lv2lint") - (version "0.4.0") + (version "0.8.0") (source (origin (method git-fetch) @@ -4650,7 +4650,7 @@ libsamplerate for reading and resampling audio files, based on Robin Gareus' (file-name (git-file-name name version)) (sha256 (base32 - "1pspwqpzl2dw1hd9ra9yr53arqbbqjn7d7j0f7p9g3iqa76vblpi")))) + "1jrka0hsn4n1clri7zfkcl3c2vi52144lkpjm81l51ff8rqy8ks1")))) (build-system meson-build-system) (arguments `(#:configure-flags @@ -4778,6 +4778,37 @@ edited, converted, compressed and saved.") ,@(package-inputs ztoolkit))) (synopsis "ZToolkit with SVG support"))) +(define-public lsp-dsp-lib + (package + (name "lsp-dsp-lib") + (version "0.5.8") + (source + (origin + (method url-fetch) + (uri (string-append "https://github.com/sadko4u/lsp-dsp-lib/" + "releases/download/lsp-dsp-lib-" version + "/lsp-dsp-lib-" version "-src.tar.gz")) + (sha256 + (base32 + "07w3d2i0z0xmvi1ngcgs7lc5a0da8jvf7rv4dnjk01md43b7fkh1")))) + (build-system gnu-build-system) + (arguments + `(#:tests? #f ; no tests + #:make-flags + (list (string-append "CC=" ,(cc-for-target))) + #:phases + (modify-phases %standard-phases + (replace 'configure + (lambda* (#:key outputs #:allow-other-keys) + (invoke "make" "config" + (string-append "PREFIX=" (assoc-ref outputs "out")))))))) + (home-page "https://github.com/sadko4u/lsp-dsp-lib") + (synopsis "Digital signal processing library") + (description "The LSP DSP library provides a set of functions that perform +SIMD-optimized computing on several hardware architectures. All functions +currently operate on IEEE-754 single-precision floating-point numbers.") + (license license:lgpl3+))) + (define-public codec2 (package (name "codec2") diff --git a/gnu/packages/aux-files/linux-libre/4.14-arm.conf b/gnu/packages/aux-files/linux-libre/4.14-arm.conf index 05fa8cc96f..c6d19f50d7 100644 --- a/gnu/packages/aux-files/linux-libre/4.14-arm.conf +++ b/gnu/packages/aux-files/linux-libre/4.14-arm.conf @@ -305,7 +305,9 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y diff --git a/gnu/packages/aux-files/linux-libre/4.14-i686.conf b/gnu/packages/aux-files/linux-libre/4.14-i686.conf index db09a41d7d..28bf8204e1 100644 --- a/gnu/packages/aux-files/linux-libre/4.14-i686.conf +++ b/gnu/packages/aux-files/linux-libre/4.14-i686.conf @@ -350,7 +350,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_LBDAF=y diff --git a/gnu/packages/aux-files/linux-libre/4.14-x86_64.conf b/gnu/packages/aux-files/linux-libre/4.14-x86_64.conf index 508c943b47..f5b9730622 100644 --- a/gnu/packages/aux-files/linux-libre/4.14-x86_64.conf +++ b/gnu/packages/aux-files/linux-libre/4.14-x86_64.conf @@ -370,7 +370,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLK_SCSI_REQUEST=y diff --git a/gnu/packages/aux-files/linux-libre/4.19-arm.conf b/gnu/packages/aux-files/linux-libre/4.19-arm.conf index 239e6e5f23..32d288b0f4 100644 --- a/gnu/packages/aux-files/linux-libre/4.19-arm.conf +++ b/gnu/packages/aux-files/linux-libre/4.19-arm.conf @@ -876,7 +876,9 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y diff --git a/gnu/packages/aux-files/linux-libre/4.19-arm64.conf b/gnu/packages/aux-files/linux-libre/4.19-arm64.conf index 45f9ab89ef..76bd266ec6 100644 --- a/gnu/packages/aux-files/linux-libre/4.19-arm64.conf +++ b/gnu/packages/aux-files/linux-libre/4.19-arm64.conf @@ -750,7 +750,9 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y diff --git a/gnu/packages/aux-files/linux-libre/4.19-i686.conf b/gnu/packages/aux-files/linux-libre/4.19-i686.conf index 03f51f4bf8..0fb07d5231 100644 --- a/gnu/packages/aux-files/linux-libre/4.19-i686.conf +++ b/gnu/packages/aux-files/linux-libre/4.19-i686.conf @@ -881,7 +881,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_LBDAF=y diff --git a/gnu/packages/aux-files/linux-libre/4.19-x86_64.conf b/gnu/packages/aux-files/linux-libre/4.19-x86_64.conf index 685ca2adfb..49a349f249 100644 --- a/gnu/packages/aux-files/linux-libre/4.19-x86_64.conf +++ b/gnu/packages/aux-files/linux-libre/4.19-x86_64.conf @@ -872,7 +872,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLK_SCSI_REQUEST=y diff --git a/gnu/packages/aux-files/linux-libre/4.4-i686.conf b/gnu/packages/aux-files/linux-libre/4.4-i686.conf index 33a5f67d85..32442eb55a 100644 --- a/gnu/packages/aux-files/linux-libre/4.4-i686.conf +++ b/gnu/packages/aux-files/linux-libre/4.4-i686.conf @@ -302,7 +302,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_LBDAF=y diff --git a/gnu/packages/aux-files/linux-libre/4.4-x86_64.conf b/gnu/packages/aux-files/linux-libre/4.4-x86_64.conf index aabd0dfee1..adfb848f5b 100644 --- a/gnu/packages/aux-files/linux-libre/4.4-x86_64.conf +++ b/gnu/packages/aux-files/linux-libre/4.4-x86_64.conf @@ -315,7 +315,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y diff --git a/gnu/packages/aux-files/linux-libre/4.9-i686.conf b/gnu/packages/aux-files/linux-libre/4.9-i686.conf index d1a64e2772..d4a4b7f254 100644 --- a/gnu/packages/aux-files/linux-libre/4.9-i686.conf +++ b/gnu/packages/aux-files/linux-libre/4.9-i686.conf @@ -322,7 +322,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_LBDAF=y diff --git a/gnu/packages/aux-files/linux-libre/4.9-x86_64.conf b/gnu/packages/aux-files/linux-libre/4.9-x86_64.conf index 3d69605c19..94aa2174c7 100644 --- a/gnu/packages/aux-files/linux-libre/4.9-x86_64.conf +++ b/gnu/packages/aux-files/linux-libre/4.9-x86_64.conf @@ -339,7 +339,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y diff --git a/gnu/packages/aux-files/linux-libre/5.4-arm.conf b/gnu/packages/aux-files/linux-libre/5.4-arm.conf index a54228643b..7c9ab94719 100644 --- a/gnu/packages/aux-files/linux-libre/5.4-arm.conf +++ b/gnu/packages/aux-files/linux-libre/5.4-arm.conf @@ -880,7 +880,9 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_TRIM_UNUSED_KSYMS is not set diff --git a/gnu/packages/aux-files/linux-libre/5.4-arm64.conf b/gnu/packages/aux-files/linux-libre/5.4-arm64.conf index fabd25c6a4..6520d1ddf2 100644 --- a/gnu/packages/aux-files/linux-libre/5.4-arm64.conf +++ b/gnu/packages/aux-files/linux-libre/5.4-arm64.conf @@ -781,7 +781,9 @@ CONFIG_MODVERSIONS=y CONFIG_ASM_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_TRIM_UNUSED_KSYMS is not set diff --git a/gnu/packages/aux-files/linux-libre/5.4-i686.conf b/gnu/packages/aux-files/linux-libre/5.4-i686.conf index 50a41f6cc9..3727f9d486 100644 --- a/gnu/packages/aux-files/linux-libre/5.4-i686.conf +++ b/gnu/packages/aux-files/linux-libre/5.4-i686.conf @@ -850,7 +850,9 @@ CONFIG_MODVERSIONS=y CONFIG_ASM_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_MODULES_TREE_LOOKUP=y diff --git a/gnu/packages/aux-files/linux-libre/5.4-x86_64.conf b/gnu/packages/aux-files/linux-libre/5.4-x86_64.conf index 30fdc4e86a..be7a603af1 100644 --- a/gnu/packages/aux-files/linux-libre/5.4-x86_64.conf +++ b/gnu/packages/aux-files/linux-libre/5.4-x86_64.conf @@ -849,7 +849,9 @@ CONFIG_MODVERSIONS=y CONFIG_ASM_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set +CONFIG_MODULE_COMPRESS=y +CONFIG_MODULE_COMPRESS_GZIP=y +# CONFIG_MODULE_COMPRESS_XZ is not set # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_MODULES_TREE_LOOKUP=y diff --git a/gnu/packages/aux-files/linux-libre/5.7-arm.conf b/gnu/packages/aux-files/linux-libre/5.7-arm.conf deleted file mode 100644 index 6ed8459b26..0000000000 --- a/gnu/packages/aux-files/linux-libre/5.7-arm.conf +++ /dev/null @@ -1,9612 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/arm 5.7.12-gnu Kernel Configuration -# - -# -# Compiler: gcc (Debian 8.3.0-6) 8.3.0 -# -CONFIG_CC_IS_GCC=y -CONFIG_GCC_VERSION=80300 -CONFIG_LD_VERSION=231010000 -CONFIG_CLANG_VERSION=0 -CONFIG_CC_CAN_LINK=y -CONFIG_CC_HAS_ASM_GOTO=y -CONFIG_CC_HAS_ASM_INLINE=y -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_TABLE_SORT=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_BUILD_SALT="" -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_LZMA is not set -CONFIG_KERNEL_XZ=y -# CONFIG_KERNEL_LZO is not set -# CONFIG_KERNEL_LZ4 is not set -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -# CONFIG_USELIB is not set -CONFIG_AUDIT=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_INJECTION=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -# CONFIG_GENERIC_IRQ_DEBUGFS is not set -# end of IRQ subsystem - -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -# CONFIG_NO_HZ_FULL is not set -# CONFIG_NO_HZ is not set -CONFIG_HIGH_RES_TIMERS=y -# end of Timers subsystem - -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -CONFIG_SCHED_THERMAL_PRESSURE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_PSI=y -# CONFIG_PSI_DEFAULT_DISABLED is not set -# end of CPU/Task time and stats accounting - -CONFIG_CPU_ISOLATION=y - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -CONFIG_TREE_SRCU=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RCU_NEED_SEGCBLIST=y -# end of RCU Subsystem - -CONFIG_BUILD_BIN2C=y -# CONFIG_IKCONFIG is not set -# CONFIG_IKHEADERS is not set -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 -CONFIG_GENERIC_SCHED_CLOCK=y - -# -# Scheduler features -# -# CONFIG_UCLAMP_TASK is not set -# end of Scheduler features - -CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set -CONFIG_MEMCG_KMEM=y -CONFIG_BLK_CGROUP=y -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_CGROUP_PIDS=y -# CONFIG_CGROUP_RDMA is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_PERF=y -# CONFIG_CGROUP_BPF is not set -# CONFIG_CGROUP_DEBUG is not set -CONFIG_SOCK_CGROUP_DATA=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -CONFIG_CHECKPOINT_RESTORE=y -CONFIG_SCHED_AUTOGROUP=y -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -CONFIG_BOOT_CONFIG=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_HAVE_UID16=y -CONFIG_BPF=y -CONFIG_EXPERT=y -CONFIG_UID16=y -CONFIG_MULTIUSER=y -# CONFIG_SGETMASK_SYSCALL is not set -# CONFIG_SYSFS_SYSCALL is not set -CONFIG_FHANDLE=y -CONFIG_POSIX_TIMERS=y -CONFIG_PRINTK=y -CONFIG_PRINTK_NMI=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_FUTEX_PI=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_IO_URING=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_MEMBARRIER=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -CONFIG_KALLSYMS_BASE_RELATIVE=y -CONFIG_BPF_LSM=y -CONFIG_BPF_SYSCALL=y -# CONFIG_BPF_JIT_ALWAYS_ON is not set -CONFIG_USERFAULTFD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_RSEQ=y -# CONFIG_DEBUG_RSEQ is not set -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y -# CONFIG_PC104 is not set - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# end of Kernel Performance Events And Counters - -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLAB_MERGE_DEFAULT=y -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SHUFFLE_PAGE_ALLOCATOR=y -CONFIG_SYSTEM_DATA_VERIFICATION=y -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -# end of General setup - -CONFIG_ARM=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_DMA_USE_IOMMU=y -CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_NO_IOPORT_MAP=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_ARCH_HAS_BANDGAP=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIQ=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_GENERIC_BUG=y -CONFIG_PGTABLE_LEVELS=2 - -# -# System Type -# -CONFIG_MMU=y -CONFIG_ARCH_MMAP_RND_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_BITS_MAX=16 -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C24XX is not set -# CONFIG_ARCH_OMAP1 is not set - -# -# Multiple platform selection -# - -# -# CPU Core family selection -# -# CONFIG_ARCH_MULTI_V6 is not set -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MULTI_V6_V7=y -# end of Multiple platform selection - -CONFIG_ARCH_VIRT=y -# CONFIG_ARCH_ACTIONS is not set -# CONFIG_ARCH_ALPINE is not set -# CONFIG_ARCH_ARTPEC is not set -# CONFIG_ARCH_ASPEED is not set -# CONFIG_ARCH_AT91 is not set -CONFIG_ARCH_BCM=y - -# -# IPROC architected SoCs -# -# CONFIG_ARCH_BCM_CYGNUS is not set -# CONFIG_ARCH_BCM_HR2 is not set -# CONFIG_ARCH_BCM_NSP is not set -# CONFIG_ARCH_BCM_5301X is not set - -# -# KONA architected SoCs -# -# CONFIG_ARCH_BCM_281XX is not set -# CONFIG_ARCH_BCM_21664 is not set -# CONFIG_ARCH_BCM_23550 is not set - -# -# Other Architectures -# -CONFIG_ARCH_BCM2835=y -# CONFIG_ARCH_BCM_53573 is not set -# CONFIG_ARCH_BCM_63XX is not set -# CONFIG_ARCH_BRCMSTB is not set -# CONFIG_ARCH_BERLIN is not set -# CONFIG_ARCH_DIGICOLOR is not set -CONFIG_ARCH_EXYNOS=y -CONFIG_S5P_DEV_MFC=y -# CONFIG_ARCH_EXYNOS3 is not set -CONFIG_ARCH_EXYNOS4=y -CONFIG_ARCH_EXYNOS5=y - -# -# Exynos SoCs -# -CONFIG_CPU_EXYNOS4210=y -CONFIG_SOC_EXYNOS4412=y -CONFIG_SOC_EXYNOS5250=y -CONFIG_SOC_EXYNOS5260=y -CONFIG_SOC_EXYNOS5410=y -CONFIG_SOC_EXYNOS5420=y -CONFIG_SOC_EXYNOS5800=y -CONFIG_EXYNOS_MCPM=y -CONFIG_EXYNOS_CPU_SUSPEND=y -CONFIG_PLAT_SAMSUNG=y - -# -# Samsung Common options -# - -# -# Boot options -# - -# -# Power management -# -# end of Samsung Common options - -CONFIG_ARCH_HIGHBANK=y -# CONFIG_ARCH_HISI is not set -CONFIG_ARCH_MXC=y -CONFIG_MXC_TZIC=y -CONFIG_HAVE_IMX_ANATOP=y -CONFIG_HAVE_IMX_GPC=y -CONFIG_HAVE_IMX_MMDC=y -CONFIG_HAVE_IMX_SRC=y - -# -# Device tree only -# - -# -# Cortex-A platforms -# -CONFIG_SOC_IMX5=y -# CONFIG_SOC_IMX50 is not set -CONFIG_SOC_IMX51=y -CONFIG_SOC_IMX53=y -CONFIG_SOC_IMX6=y -CONFIG_SOC_IMX6Q=y -# CONFIG_SOC_IMX6SL is not set -# CONFIG_SOC_IMX6SLL is not set -# CONFIG_SOC_IMX6SX is not set -# CONFIG_SOC_IMX6UL is not set -# CONFIG_SOC_LS1021A is not set - -# -# Cortex-A/Cortex-M asymmetric multiprocessing platforms -# -# CONFIG_SOC_IMX7D is not set -# CONFIG_SOC_IMX7ULP is not set -# CONFIG_SOC_VF610 is not set -# CONFIG_ARCH_KEYSTONE is not set -# CONFIG_ARCH_MEDIATEK is not set -# CONFIG_ARCH_MESON is not set -# CONFIG_ARCH_MILBEAUT is not set -# CONFIG_ARCH_MMP is not set -CONFIG_ARCH_MVEBU=y -CONFIG_MACH_MVEBU_ANY=y -CONFIG_MACH_MVEBU_V7=y -CONFIG_MACH_ARMADA_370=y -CONFIG_MACH_ARMADA_375=y -CONFIG_MACH_ARMADA_38X=y -CONFIG_MACH_ARMADA_39X=y -CONFIG_MACH_ARMADA_XP=y -# CONFIG_MACH_DOVE is not set -# CONFIG_ARCH_NPCM is not set -CONFIG_ARCH_OMAP=y - -# -# TI OMAP Common Features -# - -# -# OMAP Feature Selections -# -CONFIG_POWER_AVS_OMAP=y -CONFIG_POWER_AVS_OMAP_CLASS3=y -CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_32K_TIMER=y -# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set -# end of TI OMAP Common Features - -CONFIG_MACH_OMAP_GENERIC=y - -# -# TI OMAP/AM/DM/DRA Family -# -CONFIG_ARCH_OMAP3=y -CONFIG_ARCH_OMAP4=y -CONFIG_SOC_OMAP5=y -CONFIG_SOC_AM33XX=y -# CONFIG_SOC_AM43XX is not set -CONFIG_SOC_DRA7XX=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_OMAP_INTERCONNECT_BARRIER=y - -# -# TI OMAP2/3/4 Specific Features -# -CONFIG_ARCH_OMAP2PLUS_TYPICAL=y -CONFIG_SOC_HAS_OMAP2_SDRC=y -CONFIG_SOC_HAS_REALTIME_COUNTER=y -CONFIG_SOC_OMAP3430=y -CONFIG_SOC_TI81XX=y -CONFIG_OMAP_PACKAGE_CBB=y - -# -# OMAP Legacy Platform Data Board Type -# -CONFIG_MACH_OMAP3517EVM=y -CONFIG_MACH_OMAP3_PANDORA=y -# CONFIG_OMAP3_SDRC_AC_TIMING is not set -# end of TI OMAP2/3/4 Specific Features - -# CONFIG_OMAP5_ERRATA_801819 is not set -# end of TI OMAP/AM/DM/DRA Family - -# CONFIG_ARCH_SIRF is not set -# CONFIG_ARCH_QCOM is not set -# CONFIG_ARCH_RDA is not set -# CONFIG_ARCH_REALVIEW is not set -CONFIG_ARCH_ROCKCHIP=y -# CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_RENESAS is not set -CONFIG_ARCH_SOCFPGA=y -# CONFIG_SOCFPGA_SUSPEND is not set -# CONFIG_PLAT_SPEAR is not set -# CONFIG_ARCH_STI is not set -# CONFIG_ARCH_STM32 is not set -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN4I=y -CONFIG_MACH_SUN5I=y -CONFIG_MACH_SUN6I=y -CONFIG_MACH_SUN7I=y -CONFIG_MACH_SUN8I=y -CONFIG_MACH_SUN9I=y -CONFIG_ARCH_SUNXI_MC_SMP=y -# CONFIG_ARCH_TANGO is not set -CONFIG_ARCH_TEGRA=y -# CONFIG_ARCH_UNIPHIER is not set -# CONFIG_ARCH_U8500 is not set -CONFIG_ARCH_VEXPRESS=y -CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y -# CONFIG_ARCH_VEXPRESS_DCSCB is not set -# CONFIG_ARCH_VEXPRESS_SPC is not set -# CONFIG_ARCH_VEXPRESS_TC2_PM is not set -CONFIG_ARCH_VT8500=y -CONFIG_ARCH_WM8850=y -# CONFIG_ARCH_ZX is not set -# CONFIG_ARCH_ZYNQ is not set -CONFIG_PLAT_ORION=y -CONFIG_PLAT_VERSATILE=y - -# -# Processor Type -# -CONFIG_CPU_PJ4B=y -CONFIG_CPU_V7=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_THUMB=y -CONFIG_ARM_THUMBEE=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_SWP_EMULATE=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_SPECTRE=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_KUSER_HELPERS=y -CONFIG_VDSO=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_CACHE_FEROCEON_L2=y -# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_CACHE_L2X0=y -# CONFIG_CACHE_L2X0_PMU is not set -CONFIG_PL310_ERRATA_588369=y -CONFIG_PL310_ERRATA_727915=y -CONFIG_PL310_ERRATA_753970=y -CONFIG_PL310_ERRATA_769419=y -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_DMA_MEM_BUFFERABLE=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_DEBUG_ALIGN_RODATA=y -CONFIG_IWMMXT=y -CONFIG_PJ4B_ERRATA_4742=y -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_643719=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_754327=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_ERRATA_798181=y -CONFIG_ARM_ERRATA_773022=y -# CONFIG_ARM_ERRATA_818325_852422 is not set -# CONFIG_ARM_ERRATA_821420 is not set -# CONFIG_ARM_ERRATA_825619 is not set -CONFIG_ARM_ERRATA_857271=y -# CONFIG_ARM_ERRATA_852421 is not set -# CONFIG_ARM_ERRATA_852423 is not set -CONFIG_ARM_ERRATA_857272=y -# end of System Type - -# -# Bus support -# -CONFIG_ARM_ERRATA_814220=y -# end of Bus support - -# -# Kernel Features -# -CONFIG_HAVE_SMP=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_ARM_CPU_TOPOLOGY=y -# CONFIG_SCHED_MC is not set -# CONFIG_SCHED_SMT is not set -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_HAVE_ARM_TWD=y -CONFIG_MCPM=y -# CONFIG_BIG_LITTLE is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_NR_CPUS=8 -CONFIG_HOTPLUG_CPU=y -CONFIG_ARM_PSCI=y -CONFIG_ARCH_NR_GPIO=2048 -CONFIG_HZ_FIXED=0 -# CONFIG_HZ_100 is not set -# CONFIG_HZ_200 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_500 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_ARM_PATCH_IDIV=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_CPU_SW_DOMAIN_PAN=y -CONFIG_HW_PERF_EVENTS=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -# CONFIG_ARM_MODULE_PLTS is not set -CONFIG_FORCE_MAX_ZONEORDER=12 -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_UACCESS_WITH_MEMCPY is not set -CONFIG_SECCOMP=y -CONFIG_PARAVIRT=y -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -CONFIG_XEN_DOM0=y -CONFIG_XEN=y -# end of Kernel Features - -# -# Boot options -# -CONFIG_USE_OF=y -CONFIG_ATAGS=y -# CONFIG_DEPRECATED_PARAM_STRUCT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_CMDLINE="" -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y -# CONFIG_CRASH_DUMP is not set -CONFIG_AUTO_ZRELADDR=y -CONFIG_EFI_STUB=y -CONFIG_EFI=y -CONFIG_DMI=y -# end of Boot options - -# -# CPU Power Management -# - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y - -# -# CPU frequency scaling drivers -# -CONFIG_CPUFREQ_DT=m -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m -CONFIG_ARM_ARMADA_37XX_CPUFREQ=m -CONFIG_ARM_ARMADA_8K_CPUFREQ=m -CONFIG_ARM_HIGHBANK_CPUFREQ=m -CONFIG_ARM_IMX6Q_CPUFREQ=m -CONFIG_ARM_IMX_CPUFREQ_DT=m -CONFIG_ARM_OMAP2PLUS_CPUFREQ=y -CONFIG_ARM_RASPBERRYPI_CPUFREQ=m -CONFIG_ARM_SCMI_CPUFREQ=m -CONFIG_ARM_TEGRA20_CPUFREQ=y -CONFIG_ARM_TEGRA124_CPUFREQ=y -# CONFIG_ARM_TI_CPUFREQ is not set -# CONFIG_QORIQ_CPUFREQ is not set -# end of CPU Frequency scaling - -# -# CPU Idle -# -# CONFIG_CPU_IDLE is not set -CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y -# end of CPU Idle -# end of CPU Power Management - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_NEON=y -# CONFIG_KERNEL_MODE_NEON is not set -# end of Floating point emulation - -# -# Power management options -# -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SUSPEND_SKIP_SYNC is not set -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="" -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -# CONFIG_PM_WAKELOCKS is not set -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_PM_SLEEP_DEBUG=y -CONFIG_APM_EMULATION=y -CONFIG_PM_CLK=y -CONFIG_PM_GENERIC_DOMAINS=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_PM_GENERIC_DOMAINS_SLEEP=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_CPU_PM=y -CONFIG_ENERGY_MODEL=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# end of Power management options - -# -# Firmware Drivers -# -CONFIG_ARM_SCMI_PROTOCOL=y -CONFIG_ARM_SCMI_POWER_DOMAIN=m -# CONFIG_ARM_SCPI_PROTOCOL is not set -# CONFIG_FIRMWARE_MEMMAP is not set -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=y -CONFIG_RASPBERRYPI_FIRMWARE=y -CONFIG_TRUSTED_FOUNDATIONS=y -# CONFIG_TURRIS_MOX_RWTM is not set -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_ARM_PSCI_FW=y -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=m -CONFIG_EFI_ESRT=y -CONFIG_EFI_PARAMS_FROM_FDT=y -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_EFI_ARMSTUB=y -CONFIG_EFI_ARMSTUB_DTB_LOADER=y -# CONFIG_EFI_BOOTLOADER_CONTROL is not set -# CONFIG_EFI_CAPSULE_LOADER is not set -# CONFIG_EFI_TEST is not set -CONFIG_RESET_ATTACK_MITIGATION=y -# CONFIG_EFI_DISABLE_PCI_DMA is not set -# end of EFI (Extensible Firmware Interface) Support - -# CONFIG_IMX_DSP is not set -# CONFIG_IMX_SCU is not set - -# -# Tegra firmware driver -# -# CONFIG_TEGRA_IVC is not set -# end of Tegra firmware driver -# end of Firmware Drivers - -CONFIG_ARM_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM=m -CONFIG_CRYPTO_SHA256_ARM=m -CONFIG_CRYPTO_SHA512_ARM=m -CONFIG_CRYPTO_AES_ARM=m -CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_CRYPTO_POLY1305_ARM=m - -# -# General architecture-dependent options -# -CONFIG_CRASH_CORE=y -CONFIG_KEXEC_CORE=y -CONFIG_OPROFILE=m -CONFIG_HAVE_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_JUMP_LABEL=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_OPTPROBES=y -CONFIG_UPROBES=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_KRETPROBES=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_KEEPINITRD=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_STACKPROTECTOR=y -CONFIG_CC_HAS_STACKPROTECTOR_NONE=y -CONFIG_STACKPROTECTOR=y -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_HAVE_EXIT_THREAD=y -CONFIG_ARCH_MMAP_RND_BITS=8 -CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OLD_SIGACTION=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -# CONFIG_LOCK_EVENT_COUNTS is not set - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# end of GCOV-based kernel profiling - -CONFIG_HAVE_GCC_PLUGINS=y -# end of General architecture-dependent options - -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_TRIM_UNUSED_KSYMS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_RQ_ALLOC_TIME=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_CGROUP_RWSTAT=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_BLK_DEV_INTEGRITY_T10=y -# CONFIG_BLK_DEV_ZONED is not set -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_DEV_THROTTLING_LOW is not set -# CONFIG_BLK_CMDLINE_PARSER is not set -CONFIG_BLK_WBT=y -# CONFIG_BLK_CGROUP_IOLATENCY is not set -CONFIG_BLK_CGROUP_IOCOST=y -CONFIG_BLK_WBT_MQ=y -CONFIG_BLK_DEBUG_FS=y -# CONFIG_BLK_SED_OPAL is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_AIX_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -CONFIG_KARMA_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_CMDLINE_PARTITION is not set -# end of Partition Types - -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_MQ_VIRTIO=y -CONFIG_BLK_MQ_RDMA=y -CONFIG_BLK_PM=y - -# -# IO Schedulers -# -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=m -CONFIG_IOSCHED_BFQ=m -CONFIG_BFQ_GROUP_IOSCHED=y -# CONFIG_BFQ_CGROUP_DEBUG is not set -# end of IO Schedulers - -CONFIG_PADATA=y -CONFIG_ASN1=y -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_INLINE_READ_UNLOCK=y -CONFIG_INLINE_READ_UNLOCK_IRQ=y -CONFIG_INLINE_WRITE_UNLOCK=y -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y -CONFIG_FREEZER=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_ELF_FDPIC is not set -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -CONFIG_ARCH_HAS_BINFMT_FLAT=y -# CONFIG_BINFMT_FLAT is not set -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y -# end of Executable file formats - -# -# Memory Management options -# -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_PAGE_REPORTING=y -CONFIG_MIGRATION=y -CONFIG_CONTIG_ALLOC=y -CONFIG_BOUNCE=y -CONFIG_MMU_NOTIFIER=y -CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -# CONFIG_CLEANCACHE is not set -CONFIG_FRONTSWAP=y -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -CONFIG_ZSWAP=y -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set -CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set -CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" -CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y -# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set -# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set -CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" -# CONFIG_ZSWAP_DEFAULT_ON is not set -CONFIG_ZPOOL=y -CONFIG_ZBUD=y -# CONFIG_Z3FOLD is not set -CONFIG_ZSMALLOC=m -# CONFIG_PGTABLE_MAPPING is not set -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -# CONFIG_IDLE_PAGE_TRACKING is not set -CONFIG_FRAME_VECTOR=y -# CONFIG_PERCPU_STATS is not set -# CONFIG_GUP_BENCHMARK is not set -# end of Memory Management options - -CONFIG_NET=y -CONFIG_NET_INGRESS=y -CONFIG_NET_EGRESS=y -CONFIG_NET_REDIRECT=y -CONFIG_SKB_EXTENSIONS=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=m -CONFIG_UNIX=y -CONFIG_UNIX_SCM=y -CONFIG_UNIX_DIAG=m -# CONFIG_TLS is not set -CONFIG_XFRM=y -CONFIG_XFRM_ALGO=m -CONFIG_XFRM_USER=m -CONFIG_XFRM_INTERFACE=m -CONFIG_XFRM_SUB_POLICY=y -CONFIG_XFRM_MIGRATE=y -# CONFIG_XFRM_STATISTICS is not set -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -# CONFIG_SMC is not set -# CONFIG_XDP_SOCKETS is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_FIB_TRIE_STATS=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE_COMMON=y -CONFIG_IP_MROUTE=y -CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_ESP_OFFLOAD is not set -# CONFIG_INET_ESPINTCP is not set -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m -# CONFIG_INET_RAW_DIAG is not set -CONFIG_INET_DIAG_DESTROY=y -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_NV=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_CONG_DCTCP=m -CONFIG_TCP_CONG_CDG=m -CONFIG_TCP_CONG_BBR=m -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -# CONFIG_INET6_ESP_OFFLOAD is not set -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=y -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -CONFIG_IPV6_FOU=m -CONFIG_IPV6_FOU_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y -# CONFIG_IPV6_SEG6_LWTUNNEL is not set -# CONFIG_IPV6_SEG6_HMAC is not set -# CONFIG_IPV6_RPL_LWTUNNEL is not set -# CONFIG_NETLABEL is not set -CONFIG_MPTCP=y -CONFIG_MPTCP_IPV6=y -# CONFIG_MPTCP_HMAC_TEST is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_FAMILY_BRIDGE=y -CONFIG_NETFILTER_FAMILY_ARP=y -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NETFILTER_NETLINK_OSF=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -CONFIG_NF_LOG_NETDEV=m -CONFIG_NETFILTER_CONNCOUNT=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y -CONFIG_NF_CONNTRACK_PROCFS=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -CONFIG_NF_CT_NETLINK_HELPER=m -CONFIG_NETFILTER_NETLINK_GLUE_CT=y -CONFIG_NF_NAT=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=y -CONFIG_NF_NAT_MASQUERADE=y -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_INET=y -CONFIG_NF_TABLES_NETDEV=y -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -CONFIG_NFT_FLOW_OFFLOAD=m -CONFIG_NFT_COUNTER=m -CONFIG_NFT_CONNLIMIT=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_TUNNEL=m -CONFIG_NFT_OBJREF=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NFT_FIB=m -CONFIG_NFT_FIB_INET=m -CONFIG_NFT_XFRM=m -CONFIG_NFT_SOCKET=m -CONFIG_NFT_OSF=m -CONFIG_NFT_TPROXY=m -CONFIG_NFT_SYNPROXY=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -CONFIG_NFT_FIB_NETDEV=m -CONFIG_NF_FLOW_TABLE_INET=m -CONFIG_NF_FLOW_TABLE=m -CONFIG_NETFILTER_XTABLES=m - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -CONFIG_NETFILTER_XT_TARGET_AUDIT=m -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -# end of Core Netfilter Configuration - -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -# CONFIG_IP_SET_HASH_IPMAC is not set -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_MH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS MH scheduler -# -CONFIG_IP_VS_MH_TAB_INDEX=12 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_SOCKET_IPV4=m -CONFIG_NF_TPROXY_IPV4=m -CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NFT_FIB_IPV4=m -CONFIG_NF_TABLES_ARP=y -CONFIG_NF_FLOW_TABLE_IPV4=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -# end of IP: Netfilter Configuration - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_SOCKET_IPV6=m -CONFIG_NF_TPROXY_IPV6=m -CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NFT_FIB_IPV6=m -CONFIG_NF_FLOW_TABLE_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_SRH=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m -# end of IPv6: Netfilter Configuration - -CONFIG_NF_DEFRAG_IPV6=m -CONFIG_NF_TABLES_BRIDGE=m -CONFIG_NFT_BRIDGE_META=m -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_NF_CONNTRACK_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -# CONFIG_BPFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=y -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_TFRC_LIB=y -# end of DCCP CCIDs Configuration - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# end of DCCP Kernel Hacking - -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_INET_SCTP_DIAG=m -CONFIG_RDS=m -CONFIG_RDS_RDMA=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set -CONFIG_TIPC=m -CONFIG_TIPC_MEDIA_IB=y -CONFIG_TIPC_MEDIA_UDP=y -CONFIG_TIPC_CRYPTO=y -CONFIG_TIPC_DIAG=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_MRP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y -CONFIG_NET_DSA=m -CONFIG_NET_DSA_TAG_8021Q=m -CONFIG_NET_DSA_TAG_AR9331=m -CONFIG_NET_DSA_TAG_BRCM_COMMON=m -CONFIG_NET_DSA_TAG_BRCM=m -CONFIG_NET_DSA_TAG_BRCM_PREPEND=m -CONFIG_NET_DSA_TAG_GSWIP=m -CONFIG_NET_DSA_TAG_DSA=m -CONFIG_NET_DSA_TAG_EDSA=m -CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_OCELOT=m -CONFIG_NET_DSA_TAG_QCA=m -CONFIG_NET_DSA_TAG_LAN9303=m -CONFIG_NET_DSA_TAG_SJA1105=m -CONFIG_NET_DSA_TAG_TRAILER=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -CONFIG_PHONET=m -CONFIG_6LOWPAN=m -# CONFIG_6LOWPAN_DEBUGFS is not set -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m -CONFIG_6LOWPAN_GHC_UDP=m -CONFIG_6LOWPAN_GHC_ICMPV6=m -CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m -CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m -CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m -CONFIG_IEEE802154=m -# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_CBS=m -CONFIG_NET_SCH_ETF=m -CONFIG_NET_SCH_TAPRIO=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_SKBPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_CAKE=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_FQ_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -CONFIG_NET_SCH_ETS=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_CLS_MATCHALL=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_EMATCH_CANID=m -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_EMATCH_IPT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -# CONFIG_NET_ACT_SAMPLE is not set -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_MPLS=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -CONFIG_NET_ACT_CTINFO=m -CONFIG_NET_ACT_SKBMOD=m -CONFIG_NET_ACT_IFE=m -CONFIG_NET_ACT_TUNNEL_KEY=m -CONFIG_NET_ACT_CT=m -CONFIG_NET_IFE_SKBMARK=m -CONFIG_NET_IFE_SKBPRIO=m -CONFIG_NET_IFE_SKBTCINDEX=m -# CONFIG_NET_TC_SKB_EXT is not set -CONFIG_NET_SCH_FIFO=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=m -CONFIG_BATMAN_ADV=m -# CONFIG_BATMAN_ADV_BATMAN_V is not set -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -CONFIG_BATMAN_ADV_DEBUGFS=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_BATMAN_ADV_SYSFS=y -# CONFIG_BATMAN_ADV_TRACING is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_OPENVSWITCH_GENEVE=m -CONFIG_VSOCKETS=m -CONFIG_VSOCKETS_DIAG=m -CONFIG_VSOCKETS_LOOPBACK=m -CONFIG_VIRTIO_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS_COMMON=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=y -CONFIG_MPLS_ROUTING=m -CONFIG_MPLS_IPTUNNEL=m -CONFIG_NET_NSH=m -# CONFIG_HSR is not set -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_L3_MASTER_DEV=y -# CONFIG_NET_NCSI is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -CONFIG_BPF_JIT=y -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -CONFIG_NET_DROP_MONITOR=y -# end of Network testing -# end of Networking options - -# CONFIG_HAMRADIO is not set -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m -CONFIG_CAN_J1939=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -# CONFIG_CAN_VXCAN is not set -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -# CONFIG_CAN_FLEXCAN is not set -# CONFIG_CAN_GRCAN is not set -CONFIG_CAN_KVASER_PCIEFD=m -CONFIG_CAN_SUN4I=m -# CONFIG_CAN_TI_HECC is not set -# CONFIG_CAN_C_CAN is not set -# CONFIG_CAN_CC770 is not set -# CONFIG_CAN_IFI_CANFD is not set -# CONFIG_CAN_M_CAN is not set -# CONFIG_CAN_PEAK_PCIEFD is not set -# CONFIG_CAN_RCAR is not set -# CONFIG_CAN_RCAR_CANFD is not set -CONFIG_CAN_SJA1000=m -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_F81601=m -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_PLX_PCI=m -CONFIG_CAN_SJA1000_ISA=m -# CONFIG_CAN_SJA1000_PLATFORM is not set -CONFIG_CAN_SOFTING=m - -# -# CAN SPI interfaces -# -# CONFIG_CAN_HI311X is not set -# CONFIG_CAN_MCP251X is not set -# end of CAN SPI interfaces - -# -# CAN USB interfaces -# -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -# CONFIG_CAN_MCBA_USB is not set -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_UCAN=m -# end of CAN USB interfaces - -# CONFIG_CAN_DEBUG_DEVICES is not set -# end of CAN Device Drivers - -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -CONFIG_BT_6LOWPAN=m -# CONFIG_BT_LEDS is not set -# CONFIG_BT_SELFTEST is not set -CONFIG_BT_DEBUGFS=y - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_HCIBTUSB=m -# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_MTK=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_BT_ATH3K=m -CONFIG_BT_MTKSDIO=m -CONFIG_BT_HCIRSI=m -# end of Bluetooth device drivers - -CONFIG_AF_RXRPC=m -CONFIG_AF_RXRPC_IPV6=y -# CONFIG_AF_RXRPC_INJECT_LOSS is not set -# CONFIG_AF_RXRPC_DEBUG is not set -CONFIG_RXKAD=y -# CONFIG_AF_KCM is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y -CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y -CONFIG_CFG80211_DEFAULT_PS=y -# CONFIG_CFG80211_DEBUGFS is not set -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_CFG80211_WEXT_EXPORT=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=m -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -# CONFIG_RFKILL_GPIO is not set -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -# CONFIG_NET_9P_XEN is not set -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set -# CONFIG_CAIF is not set -CONFIG_CEPH_LIB=m -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set -# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -# CONFIG_NFC_NCI is not set -# CONFIG_NFC_HCI is not set - -# -# Near Field Communication (NFC) devices -# -# CONFIG_NFC_TRF7970A is not set -CONFIG_NFC_SIM=m -CONFIG_NFC_PORT100=m -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -# CONFIG_NFC_PN533_I2C is not set -# CONFIG_NFC_ST95HF is not set -# end of Near Field Communication (NFC) devices - -# CONFIG_PSAMPLE is not set -CONFIG_NET_IFE=m -CONFIG_LWTUNNEL=y -CONFIG_LWTUNNEL_BPF=y -CONFIG_DST_CACHE=y -CONFIG_GRO_CELLS=y -CONFIG_NET_DEVLINK=y -CONFIG_PAGE_POOL=y -CONFIG_FAILOVER=m -CONFIG_ETHTOOL_NETLINK=y -CONFIG_HAVE_EBPF_JIT=y - -# -# Device Drivers -# -CONFIG_ARM_AMBA=y -CONFIG_TEGRA_AHB=y -CONFIG_HAVE_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_SYSCALL=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIEAER=y -CONFIG_PCIEAER_INJECT=m -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEASPM=y -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCIE_DPC=y -CONFIG_PCIE_PTM=y -# CONFIG_PCIE_BW is not set -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_STUB=m -CONFIG_PCI_ECAM=y -CONFIG_PCI_BRIDGE_EMUL=y -# CONFIG_PCI_IOV is not set -# CONFIG_PCI_PRI is not set -# CONFIG_PCI_PASID is not set -CONFIG_PCI_LABEL=y -# CONFIG_HOTPLUG_PCI is not set - -# -# PCI controller drivers -# -CONFIG_PCI_MVEBU=y -# CONFIG_PCI_FTPCI100 is not set -CONFIG_PCI_TEGRA=y -CONFIG_PCI_HOST_COMMON=y -CONFIG_PCI_HOST_GENERIC=y -# CONFIG_PCIE_XILINX is not set -# CONFIG_PCI_V3_SEMI is not set -# CONFIG_PCIE_ALTERA is not set -CONFIG_PCIE_ROCKCHIP=y -CONFIG_PCIE_ROCKCHIP_HOST=m -CONFIG_PCIE_BRCMSTB=m - -# -# DesignWare PCI Core Support -# -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -CONFIG_PCI_DRA7XX=y -CONFIG_PCI_DRA7XX_HOST=y -# CONFIG_PCIE_DW_PLAT_HOST is not set -CONFIG_PCI_IMX6=y -# CONFIG_PCI_LAYERSCAPE is not set -# CONFIG_PCIE_ARMADA_8K is not set -# CONFIG_PCI_MESON is not set -# end of DesignWare PCI Core Support - -# -# Mobiveil PCIe Core Support -# -# end of Mobiveil PCIe Core Support - -# -# Cadence PCIe controllers support -# -CONFIG_PCIE_CADENCE=y -CONFIG_PCIE_CADENCE_HOST=y -CONFIG_PCIE_CADENCE_PLAT=y -CONFIG_PCIE_CADENCE_PLAT_HOST=y -# end of Cadence PCIe controllers support -# end of PCI controller drivers - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set -# end of PCI Endpoint - -# -# PCI switch controller drivers -# -# CONFIG_PCI_SW_SWITCHTEC is not set -# end of PCI switch controller drivers - -# CONFIG_PCCARD is not set -# CONFIG_RAPIDIO is not set - -# -# Generic Driver Options -# -# CONFIG_UEVENT_HELPER is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y - -# -# Firmware loader -# -CONFIG_FW_LOADER=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_FW_LOADER_COMPRESS=y -CONFIG_FW_CACHE=y -# end of Firmware loader - -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set -# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set -CONFIG_SYS_HYPERVISOR=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_SOC_BUS=y -CONFIG_REGMAP=y -CONFIG_REGMAP_AC97=m -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_W1=m -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_REGMAP_SCCB=m -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set -CONFIG_GENERIC_ARCH_TOPOLOGY=y -# end of Generic Driver Options - -# -# Bus devices -# -CONFIG_ARM_CCI=y -CONFIG_ARM_CCI400_COMMON=y -CONFIG_ARM_CCI400_PORT_CTRL=y -# CONFIG_BRCMSTB_GISB_ARB is not set -# CONFIG_MOXTET is not set -# CONFIG_IMX_WEIM is not set -CONFIG_MVEBU_MBUS=y -CONFIG_OMAP_INTERCONNECT=y -CONFIG_OMAP_OCP2SCP=m -# CONFIG_SIMPLE_PM_BUS is not set -CONFIG_SUN50I_DE2_BUS=y -CONFIG_SUNXI_RSB=y -# CONFIG_TEGRA_GMI is not set -CONFIG_TI_PWMSS=y -CONFIG_TI_SYSC=y -CONFIG_VEXPRESS_CONFIG=y -CONFIG_MHI_BUS=m -# end of Bus devices - -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_GNSS=m -CONFIG_MTD=y -# CONFIG_MTD_TESTS is not set - -# -# Partition parsers -# -CONFIG_MTD_AR7_PARTS=m -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_OF_PARTS=m -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# end of Partition parsers - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -# CONFIG_SM_FTL is not set -CONFIG_MTD_OOPS=m -CONFIG_MTD_SWAP=m -# CONFIG_MTD_PARTITIONED_MASTER is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# end of RAM/ROM/Flash chip drivers - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -# CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_PHYSMAP_OF is not set -CONFIG_MTD_PHYSMAP_GPIO_ADDR=y -CONFIG_MTD_PCI=m -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m -# end of Mapping drivers for chip access - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -CONFIG_MTD_DATAFLASH=m -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -# CONFIG_MTD_DATAFLASH_OTP is not set -# CONFIG_MTD_MCHP23K256 is not set -CONFIG_MTD_SST25L=m -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOCG3 is not set -# end of Self-contained MTD device drivers - -CONFIG_MTD_NAND_CORE=m -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -# CONFIG_MTD_ONENAND_GENERIC is not set -CONFIG_MTD_ONENAND_OMAP2=m -# CONFIG_MTD_ONENAND_SAMSUNG is not set -# CONFIG_MTD_ONENAND_OTP is not set -CONFIG_MTD_ONENAND_2X_PROGRAM=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=m -# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set -CONFIG_MTD_RAW_NAND=m -# CONFIG_MTD_NAND_ECC_SW_BCH is not set - -# -# Raw/parallel NAND flash controllers -# -# CONFIG_MTD_NAND_DENALI_PCI is not set -# CONFIG_MTD_NAND_DENALI_DT is not set -CONFIG_MTD_NAND_OMAP2=m -# CONFIG_MTD_NAND_OMAP_BCH is not set -CONFIG_MTD_NAND_CAFE=m -CONFIG_MTD_NAND_ORION=m -CONFIG_MTD_NAND_MARVELL=m -# CONFIG_MTD_NAND_BRCMNAND is not set -CONFIG_MTD_NAND_GPMI_NAND=m -CONFIG_MTD_NAND_MXC=m -CONFIG_MTD_NAND_SUNXI=m -CONFIG_MTD_NAND_MXIC=m -CONFIG_MTD_NAND_TEGRA=m -# CONFIG_MTD_NAND_GPIO is not set -# CONFIG_MTD_NAND_PLATFORM is not set -CONFIG_MTD_NAND_CADENCE=m - -# -# Misc -# -CONFIG_MTD_SM_COMMON=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_RICOH=m -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_SPI_NAND=m - -# -# LPDDR & LPDDR2 PCM memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m -# CONFIG_MTD_LPDDR2_NVM is not set -# end of LPDDR & LPDDR2 PCM memory drivers - -CONFIG_MTD_SPI_NOR=m -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -# CONFIG_SPI_CADENCE_QUADSPI is not set -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_HYPERBUS=m -CONFIG_DTC=y -CONFIG_OF=y -# CONFIG_OF_UNITTEST is not set -CONFIG_OF_FLATTREE=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_KOBJ=y -CONFIG_OF_DYNAMIC=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_IRQ=y -CONFIG_OF_NET=y -CONFIG_OF_MDIO=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OF_RESOLVE=y -CONFIG_OF_OVERLAY=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_PARPORT=m -# CONFIG_PARPORT_PC is not set -# CONFIG_PARPORT_AX88796 is not set -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_NULL_BLK=m -CONFIG_CDROM=m -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m -CONFIG_ZRAM=m -# CONFIG_ZRAM_WRITEBACK is not set -# CONFIG_ZRAM_MEMORY_TRACKING is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=m -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m -CONFIG_XEN_BLKDEV_FRONTEND=m -CONFIG_XEN_BLKDEV_BACKEND=m -CONFIG_VIRTIO_BLK=m -CONFIG_BLK_DEV_RBD=m -# CONFIG_BLK_DEV_RSXX is not set - -# -# NVME Support -# -CONFIG_NVME_CORE=y -CONFIG_BLK_DEV_NVME=y -# CONFIG_NVME_MULTIPATH is not set -CONFIG_NVME_HWMON=y -CONFIG_NVME_FABRICS=m -CONFIG_NVME_RDMA=m -# CONFIG_NVME_FC is not set -# CONFIG_NVME_TCP is not set -CONFIG_NVME_TARGET=m -# CONFIG_NVME_TARGET_LOOP is not set -CONFIG_NVME_TARGET_RDMA=m -# CONFIG_NVME_TARGET_FC is not set -# CONFIG_NVME_TARGET_TCP is not set -# end of NVME Support - -# -# Misc devices -# -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_AD525X_DPOT=m -CONFIG_AD525X_DPOT_I2C=m -CONFIG_AD525X_DPOT_SPI=m -# CONFIG_DUMMY_IRQ is not set -# CONFIG_PHANTOM is not set -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -# CONFIG_HP_ILO is not set -CONFIG_APDS9802ALS=m -CONFIG_ISL29003=m -CONFIG_ISL29020=m -CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1770=m -CONFIG_SENSORS_APDS990X=m -CONFIG_HMC6352=m -CONFIG_DS1682=m -# CONFIG_LATTICE_ECP3_CONFIG is not set -CONFIG_SRAM=y -CONFIG_SRAM_EXEC=y -CONFIG_VEXPRESS_SYSCFG=y -# CONFIG_PCI_ENDPOINT_TEST is not set -CONFIG_XILINX_SDFEC=m -CONFIG_MISC_RTSX=m -# CONFIG_PVPANIC is not set -CONFIG_C2PORT=m - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_MAX6875=m -CONFIG_EEPROM_93CX6=m -# CONFIG_EEPROM_93XX46 is not set -# CONFIG_EEPROM_IDT_89HPESX is not set -# CONFIG_EEPROM_EE1004 is not set -# end of EEPROM support - -CONFIG_CB710_CORE=m -# CONFIG_CB710_DEBUG is not set -CONFIG_CB710_DEBUG_ASSUMPTIONS=y - -# -# Texas Instruments shared transport line discipline -# -CONFIG_TI_ST=m -# end of Texas Instruments shared transport line discipline - -# CONFIG_SENSORS_LIS3_SPI is not set -CONFIG_SENSORS_LIS3_I2C=m -CONFIG_ALTERA_STAPL=m - -# -# Intel MIC & related support -# -# CONFIG_VOP_BUS is not set -# end of Intel MIC & related support - -# CONFIG_ECHO is not set -CONFIG_MISC_ALCOR_PCI=m -CONFIG_MISC_RTSX_PCI=m -CONFIG_MISC_RTSX_USB=m -# CONFIG_HABANA_AI is not set -CONFIG_UACCE=m -# end of Misc devices - -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SRP_ATTRS=m -# end of SCSI Transports - -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_SCSI_CXGB4_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2X_FCOE=m -CONFIG_BE2ISCSI=m -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -CONFIG_SCSI_HPSA=m -# CONFIG_SCSI_3W_9XXX is not set -CONFIG_SCSI_3W_SAS=m -CONFIG_SCSI_ACARD=m -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -CONFIG_SCSI_MVSAS=m -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVSAS_TASKLET is not set -CONFIG_SCSI_MVUMI=m -CONFIG_SCSI_ADVANSYS=m -# CONFIG_SCSI_ARCMSR is not set -CONFIG_SCSI_ESAS2R=m -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -CONFIG_SCSI_MPT2SAS=m -CONFIG_SCSI_SMARTPQI=m -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PCI=m -# CONFIG_SCSI_UFS_DWC_TC_PCI is not set -# CONFIG_SCSI_UFSHCD_PLATFORM is not set -# CONFIG_SCSI_UFS_BSG is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_MYRB is not set -# CONFIG_SCSI_MYRS is not set -CONFIG_XEN_SCSI_FRONTEND=m -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -CONFIG_FCOE=m -CONFIG_SCSI_SNIC=m -# CONFIG_SCSI_SNIC_DEBUG_FS is not set -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_FDOMAIN=m -CONFIG_SCSI_FDOMAIN_PCI=m -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -CONFIG_SCSI_STEX=m -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_QEDI is not set -# CONFIG_QEDF is not set -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -# CONFIG_SCSI_DC395x is not set -CONFIG_SCSI_AM53C974=m -# CONFIG_SCSI_NSP32 is not set -CONFIG_SCSI_WD719X=m -# CONFIG_SCSI_DEBUG is not set -CONFIG_SCSI_PMCRAID=m -CONFIG_SCSI_PM8001=m -CONFIG_SCSI_BFA_FC=m -CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_CHELSIO_FCOE=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -# end of SCSI device support - -CONFIG_HAVE_PATA_PLATFORM=y -CONFIG_ATA=m -CONFIG_SATA_HOST=y -CONFIG_PATA_TIMINGS=y -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_ATA_FORCE=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -CONFIG_SATA_AHCI=m -CONFIG_SATA_MOBILE_LPM_POLICY=0 -CONFIG_SATA_AHCI_PLATFORM=m -# CONFIG_AHCI_DM816 is not set -CONFIG_AHCI_IMX=m -# CONFIG_AHCI_CEVA is not set -CONFIG_AHCI_MVEBU=m -CONFIG_AHCI_SUNXI=m -CONFIG_AHCI_TEGRA=m -# CONFIG_AHCI_QORIQ is not set -# CONFIG_SATA_INIC162X is not set -CONFIG_SATA_ACARD_AHCI=m -CONFIG_SATA_SIL24=m -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -CONFIG_PDC_ADMA=m -CONFIG_SATA_QSTOR=m -CONFIG_SATA_SX4=m -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=m -# CONFIG_SATA_DWC is not set -CONFIG_SATA_HIGHBANK=m -CONFIG_SATA_MV=m -CONFIG_SATA_NV=m -CONFIG_SATA_PROMISE=m -CONFIG_SATA_SIL=m -CONFIG_SATA_SIS=m -CONFIG_SATA_SVW=m -CONFIG_SATA_ULI=m -CONFIG_SATA_VIA=m -CONFIG_SATA_VITESSE=m - -# -# PATA SFF controllers with BMDMA -# -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -CONFIG_PATA_ARTOP=m -# CONFIG_PATA_ATIIXP is not set -CONFIG_PATA_ATP867X=m -CONFIG_PATA_CMD64X=m -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -CONFIG_PATA_IMX=m -CONFIG_PATA_IT8213=m -CONFIG_PATA_IT821X=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_MARVELL=m -# CONFIG_PATA_NETCELL is not set -CONFIG_PATA_NINJA32=m -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -CONFIG_PATA_RDC=m -CONFIG_PATA_SCH=m -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_SIL680 is not set -CONFIG_PATA_SIS=m -CONFIG_PATA_TOSHIBA=m -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set - -# -# PIO-only SFF controllers -# -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -CONFIG_PATA_PLATFORM=m -CONFIG_PATA_OF_PLATFORM=m -# CONFIG_PATA_RZ1000 is not set - -# -# Generic fallback / legacy drivers -# -CONFIG_ATA_GENERIC=m -# CONFIG_PATA_LEGACY is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -# CONFIG_MD_CLUSTER is not set -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -CONFIG_DM_UNSTRIPED=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -# CONFIG_DM_WRITECACHE is not set -CONFIG_DM_ERA=m -CONFIG_DM_CLONE=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_DUST=m -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -# CONFIG_DM_INTEGRITY is not set -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_TCM_USER2=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_TCM_FC=m -CONFIG_ISCSI_TARGET=m -CONFIG_ISCSI_TARGET_CXGB4=m -CONFIG_SBP_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -# CONFIG_FUSION_LOGGING is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_FIREWIRE=m -CONFIG_FIREWIRE_OHCI=m -CONFIG_FIREWIRE_SBP2=m -CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_NOSY=m -# end of IEEE 1394 (FireWire) support - -CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_WIREGUARD=m -# CONFIG_WIREGUARD_DEBUG is not set -CONFIG_EQUALIZER=m -# CONFIG_NET_FC is not set -CONFIG_IFB=m -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN_L3S=y -CONFIG_IPVLAN=m -# CONFIG_IPVTAP is not set -CONFIG_VXLAN=m -CONFIG_GENEVE=m -CONFIG_BAREUDP=m -CONFIG_GTP=m -CONFIG_MACSEC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_TUN=m -CONFIG_TAP=m -# CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m -CONFIG_VIRTIO_NET=m -CONFIG_NLMON=m -CONFIG_NET_VRF=m -CONFIG_VSOCKMON=m -# CONFIG_ARCNET is not set -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -CONFIG_ATM_NICSTAR=m -CONFIG_ATM_NICSTAR_USE_SUNI=y -CONFIG_ATM_NICSTAR_USE_IDT77105=y -# CONFIG_ATM_IDT77252 is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -# CONFIG_ATM_FORE200E_USE_TASKLET is not set -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -# CONFIG_ATM_HE is not set -CONFIG_ATM_SOLOS=m - -# -# Distributed Switch Architecture drivers -# -CONFIG_B53=m -# CONFIG_B53_SPI_DRIVER is not set -CONFIG_B53_MDIO_DRIVER=m -# CONFIG_B53_MMAP_DRIVER is not set -# CONFIG_B53_SRAB_DRIVER is not set -# CONFIG_B53_SERDES is not set -CONFIG_NET_DSA_BCM_SF2=m -# CONFIG_NET_DSA_LOOP is not set -# CONFIG_NET_DSA_LANTIQ_GSWIP is not set -# CONFIG_NET_DSA_MT7530 is not set -CONFIG_NET_DSA_MV88E6060=m -# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set -# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -# CONFIG_NET_DSA_MV88E6XXX_PTP is not set -CONFIG_NET_DSA_MSCC_FELIX=m -CONFIG_NET_DSA_AR9331=m -CONFIG_NET_DSA_SJA1105=m -CONFIG_NET_DSA_SJA1105_PTP=y -# CONFIG_NET_DSA_SJA1105_TAS is not set -# CONFIG_NET_DSA_QCA8K is not set -CONFIG_NET_DSA_REALTEK_SMI=m -# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set -# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set -CONFIG_NET_DSA_VITESSE_VSC73XX=m -CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m -CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m -# end of Distributed Switch Architecture drivers - -CONFIG_ETHERNET=y -CONFIG_MDIO=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_TYPHOON=m -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_NET_VENDOR_AGERE=y -CONFIG_ET131X=m -CONFIG_NET_VENDOR_ALACRITECH=y -# CONFIG_SLICOSS is not set -CONFIG_NET_VENDOR_ALLWINNER=y -CONFIG_SUN4I_EMAC=m -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -# CONFIG_ALTERA_TSE is not set -CONFIG_NET_VENDOR_AMAZON=y -CONFIG_ENA_ETHERNET=m -CONFIG_NET_VENDOR_AMD=y -# CONFIG_AMD8111_ETH is not set -CONFIG_PCNET32=m -CONFIG_NET_VENDOR_AQUANTIA=y -# CONFIG_NET_VENDOR_ARC is not set -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_ATL2=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_ALX=m -# CONFIG_NET_VENDOR_AURORA is not set -CONFIG_NET_VENDOR_BROADCOM=y -# CONFIG_B44 is not set -# CONFIG_BCMGENET is not set -CONFIG_BNX2=m -CONFIG_CNIC=m -CONFIG_TIGON3=m -CONFIG_TIGON3_HWMON=y -CONFIG_BNX2X=m -# CONFIG_SYSTEMPORT is not set -CONFIG_BNXT=m -CONFIG_BNXT_FLOWER_OFFLOAD=y -# CONFIG_BNXT_DCB is not set -CONFIG_BNXT_HWMON=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_BNA=m -CONFIG_NET_VENDOR_CADENCE=y -# CONFIG_MACB is not set -CONFIG_NET_CALXEDA_XGMAC=m -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m -CONFIG_CHELSIO_T4_DCB=y -CONFIG_CHELSIO_T4_FCOE=y -CONFIG_CHELSIO_T4VF=m -CONFIG_CHELSIO_LIB=m -CONFIG_NET_VENDOR_CIRRUS=y -# CONFIG_CS89x0 is not set -CONFIG_NET_VENDOR_CISCO=y -CONFIG_ENIC=m -CONFIG_NET_VENDOR_CORTINA=y -CONFIG_GEMINI_ETHERNET=m -# CONFIG_DM9000 is not set -# CONFIG_DNET is not set -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_DE2104X_DSL=0 -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_TULIP_NAPI=y -CONFIG_TULIP_NAPI_HW_MITIGATION=y -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_NET_VENDOR_DLINK=y -CONFIG_DL2K=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_BE2NET=m -CONFIG_BE2NET_HWMON=y -CONFIG_BE2NET_BE2=y -CONFIG_BE2NET_BE3=y -CONFIG_BE2NET_LANCER=y -CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_EZCHIP=y -# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set -CONFIG_NET_VENDOR_FARADAY=y -# CONFIG_FTMAC100 is not set -# CONFIG_FTGMAC100 is not set -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_FEC=y -# CONFIG_FSL_PQ_MDIO is not set -# CONFIG_FSL_XGMAC_MDIO is not set -# CONFIG_GIANFAR is not set -CONFIG_FSL_ENETC=m -CONFIG_FSL_ENETC_VF=m -CONFIG_FSL_ENETC_MDIO=m -CONFIG_FSL_ENETC_PTP_CLOCK=m -CONFIG_FSL_ENETC_QOS=y -CONFIG_NET_VENDOR_GOOGLE=y -CONFIG_GVE=m -CONFIG_NET_VENDOR_HISILICON=y -# CONFIG_HIX5HD2_GMAC is not set -# CONFIG_HISI_FEMAC is not set -# CONFIG_HIP04_ETH is not set -# CONFIG_HNS_DSAF is not set -# CONFIG_HNS_ENET is not set -# CONFIG_HNS3 is not set -CONFIG_NET_VENDOR_HUAWEI=y -CONFIG_NET_VENDOR_I825XX=y -CONFIG_NET_VENDOR_INTEL=y -CONFIG_E100=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_IGB=m -CONFIG_IGB_HWMON=y -CONFIG_IGBVF=m -CONFIG_IXGB=m -CONFIG_IXGBE=m -CONFIG_IXGBE_HWMON=y -CONFIG_IXGBE_DCB=y -CONFIG_IXGBEVF=m -CONFIG_I40E=m -CONFIG_I40E_DCB=y -CONFIG_IAVF=m -CONFIG_I40EVF=m -# CONFIG_ICE is not set -# CONFIG_FM10K is not set -# CONFIG_IGC is not set -CONFIG_JME=m -CONFIG_NET_VENDOR_MARVELL=y -# CONFIG_MV643XX_ETH is not set -CONFIG_MVMDIO=m -# CONFIG_MVNETA_BM_ENABLE is not set -CONFIG_MVNETA=m -CONFIG_MVPP2=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKGE_GENESIS=y -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_DCB=y -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX4_CORE_GEN2=y -CONFIG_MLX5_CORE=m -# CONFIG_MLX5_FPGA is not set -CONFIG_MLX5_CORE_EN=y -CONFIG_MLX5_EN_ARFS=y -CONFIG_MLX5_EN_RXNFC=y -CONFIG_MLX5_MPFS=y -CONFIG_MLX5_ESWITCH=y -CONFIG_MLX5_CORE_EN_DCB=y -# CONFIG_MLX5_CORE_IPOIB is not set -CONFIG_MLX5_SW_STEERING=y -# CONFIG_MLXSW_CORE is not set -# CONFIG_MLXFW is not set -CONFIG_NET_VENDOR_MICREL=y -# CONFIG_KS8842 is not set -# CONFIG_KS8851 is not set -# CONFIG_KS8851_MLL is not set -CONFIG_KSZ884X_PCI=m -CONFIG_NET_VENDOR_MICROCHIP=y -CONFIG_ENC28J60=m -# CONFIG_ENC28J60_WRITEVERIFY is not set -# CONFIG_ENCX24J600 is not set -# CONFIG_LAN743X is not set -CONFIG_NET_VENDOR_MICROSEMI=y -CONFIG_MSCC_OCELOT_SWITCH=m -CONFIG_MSCC_OCELOT_SWITCH_OCELOT=m -CONFIG_NET_VENDOR_MYRI=y -CONFIG_MYRI10GE=m -CONFIG_FEALNX=m -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NATSEMI=m -CONFIG_NS83820=m -CONFIG_NET_VENDOR_NETERION=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set -CONFIG_NET_VENDOR_NETRONOME=y -CONFIG_NFP=m -# CONFIG_NFP_APP_FLOWER is not set -CONFIG_NFP_APP_ABM_NIC=y -# CONFIG_NFP_DEBUG is not set -CONFIG_NET_VENDOR_NI=y -# CONFIG_NI_XGE_MANAGEMENT_ENET is not set -CONFIG_NET_VENDOR_8390=y -# CONFIG_AX88796 is not set -CONFIG_NE2K_PCI=m -CONFIG_NET_VENDOR_NVIDIA=y -# CONFIG_FORCEDETH is not set -CONFIG_NET_VENDOR_OKI=y -# CONFIG_ETHOC is not set -CONFIG_NET_VENDOR_PACKET_ENGINES=y -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_NET_VENDOR_PENSANDO=y -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_QLA3XXX=m -CONFIG_QLCNIC=m -CONFIG_QLCNIC_DCB=y -CONFIG_QLCNIC_HWMON=y -CONFIG_NETXEN_NIC=m -CONFIG_QED=m -CONFIG_QEDE=m -CONFIG_NET_VENDOR_QUALCOMM=y -# CONFIG_QCA7000_SPI is not set -# CONFIG_QCOM_EMAC is not set -CONFIG_RMNET=m -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -CONFIG_8139TOO_TUNE_TWISTER=y -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R8169=m -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_ROCKER=y -# CONFIG_ROCKER is not set -CONFIG_NET_VENDOR_SAMSUNG=y -# CONFIG_SXGBE_ETH is not set -# CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_NET_VENDOR_SOLARFLARE=y -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_SFC_MCDI_MON=y -CONFIG_SFC_MCDI_LOGGING=y -CONFIG_SFC_FALCON=m -CONFIG_SFC_FALCON_MTD=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -# CONFIG_SIS900 is not set -CONFIG_SIS190=m -CONFIG_NET_VENDOR_SMSC=y -CONFIG_SMC91X=m -CONFIG_EPIC100=m -CONFIG_SMC911X=m -CONFIG_SMSC911X=m -CONFIG_SMSC9420=m -CONFIG_NET_VENDOR_SOCIONEXT=y -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_STMMAC_ETH=m -# CONFIG_STMMAC_SELFTESTS is not set -CONFIG_STMMAC_PLATFORM=m -# CONFIG_DWMAC_DWC_QOS_ETH is not set -CONFIG_DWMAC_GENERIC=m -CONFIG_DWMAC_ROCKCHIP=m -CONFIG_DWMAC_SOCFPGA=m -CONFIG_DWMAC_SUNXI=m -CONFIG_DWMAC_SUN8I=m -# CONFIG_STMMAC_PCI is not set -CONFIG_NET_VENDOR_SUN=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -CONFIG_CASSINI=m -CONFIG_NIU=m -CONFIG_NET_VENDOR_SYNOPSYS=y -# CONFIG_DWC_XLGMAC is not set -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_TEHUTI=m -CONFIG_NET_VENDOR_TI=y -CONFIG_TI_DAVINCI_EMAC=m -CONFIG_TI_DAVINCI_MDIO=m -CONFIG_TI_CPSW_PHY_SEL=y -CONFIG_TI_CPSW=m -CONFIG_TI_CPSW_SWITCHDEV=m -# CONFIG_TI_CPTS is not set -CONFIG_TLAN=m -CONFIG_NET_VENDOR_VIA=y -# CONFIG_VIA_RHINE is not set -CONFIG_VIA_VELOCITY=m -CONFIG_NET_VENDOR_WIZNET=y -# CONFIG_WIZNET_W5100 is not set -# CONFIG_WIZNET_W5300 is not set -CONFIG_NET_VENDOR_XILINX=y -CONFIG_XILINX_AXI_EMAC=m -CONFIG_XILINX_LL_TEMAC=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -# CONFIG_HIPPI is not set -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BCM_UNIMAC=m -# CONFIG_MDIO_BITBANG is not set -CONFIG_MDIO_BUS_MUX=m -# CONFIG_MDIO_BUS_MUX_GPIO is not set -# CONFIG_MDIO_BUS_MUX_MMIOREG is not set -# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set -# CONFIG_MDIO_HISI_FEMAC is not set -CONFIG_MDIO_I2C=m -CONFIG_MDIO_IPQ8064=m -# CONFIG_MDIO_MSCC_MIIM is not set -CONFIG_MDIO_MVUSB=m -CONFIG_MDIO_SUN4I=y -CONFIG_MDIO_XPCS=m -CONFIG_PHYLINK=m -CONFIG_PHYLIB=y -CONFIG_SWPHY=y -# CONFIG_LED_TRIGGER_PHY is not set - -# -# MII PHY device drivers -# -CONFIG_SFP=m -CONFIG_ADIN_PHY=m -CONFIG_AMD_PHY=m -CONFIG_AQUANTIA_PHY=m -CONFIG_AX88796B_PHY=m -CONFIG_BCM7XXX_PHY=m -CONFIG_BCM87XX_PHY=m -CONFIG_BCM_NET_PHYLIB=m -CONFIG_BROADCOM_PHY=m -CONFIG_BCM84881_PHY=m -CONFIG_CICADA_PHY=m -# CONFIG_CORTINA_PHY is not set -CONFIG_DAVICOM_PHY=m -CONFIG_DP83822_PHY=m -CONFIG_DP83TC811_PHY=m -CONFIG_DP83848_PHY=m -CONFIG_DP83867_PHY=m -CONFIG_DP83869_PHY=m -CONFIG_FIXED_PHY=y -CONFIG_ICPLUS_PHY=m -# CONFIG_INTEL_XWAY_PHY is not set -CONFIG_LSI_ET1011C_PHY=m -CONFIG_LXT_PHY=m -CONFIG_MARVELL_PHY=m -# CONFIG_MARVELL_10G_PHY is not set -CONFIG_MICREL_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_MICROCHIP_T1_PHY=m -CONFIG_MICROSEMI_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_NXP_TJA11XX_PHY=m -CONFIG_AT803X_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_REALTEK_PHY=m -CONFIG_RENESAS_PHY=m -CONFIG_ROCKCHIP_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_STE10XP=m -CONFIG_TERANETICS_PHY=m -CONFIG_VITESSE_PHY=m -# CONFIG_XILINX_GMII2RGMII is not set -# CONFIG_MICREL_KS8995MA is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLHC=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y - -# -# Host-side USB support is needed for USB Network Adapter support -# -CONFIG_USB_NET_DRIVERS=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET_ENABLE=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_CDC_PHONET=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m -CONFIG_USB_NET_AQC111=m -CONFIG_WLAN=y -# CONFIG_WIRELESS_WDS is not set -CONFIG_WLAN_VENDOR_ADMTEK=y -CONFIG_ADM8211=m -CONFIG_ATH_COMMON=m -CONFIG_WLAN_VENDOR_ATH=y -# CONFIG_ATH_DEBUG is not set -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -# CONFIG_ATH5K_TRACER is not set -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -CONFIG_ATH9K_PCI=y -# CONFIG_ATH9K_AHB is not set -# CONFIG_ATH9K_DEBUGFS is not set -# CONFIG_ATH9K_DYNACK is not set -# CONFIG_ATH9K_WOW is not set -CONFIG_ATH9K_RFKILL=y -# CONFIG_ATH9K_CHANNEL_CONTEXT is not set -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_PCI_NO_EEPROM=m -CONFIG_ATH9K_HTC=m -# CONFIG_ATH9K_HTC_DEBUGFS is not set -# CONFIG_ATH9K_HWRNG is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -CONFIG_CARL9170_WPC=y -# CONFIG_CARL9170_HWRNG is not set -CONFIG_ATH6KL=m -CONFIG_ATH6KL_SDIO=m -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m -CONFIG_WIL6210=m -CONFIG_WIL6210_ISR_COR=y -CONFIG_WIL6210_TRACING=y -CONFIG_WIL6210_DEBUGFS=y -CONFIG_ATH10K=m -CONFIG_ATH10K_CE=y -CONFIG_ATH10K_PCI=m -# CONFIG_ATH10K_AHB is not set -# CONFIG_ATH10K_SDIO is not set -CONFIG_ATH10K_USB=m -# CONFIG_ATH10K_DEBUG is not set -# CONFIG_ATH10K_DEBUGFS is not set -# CONFIG_ATH10K_TRACING is not set -# CONFIG_WCN36XX is not set -CONFIG_WLAN_VENDOR_ATMEL=y -# CONFIG_ATMEL is not set -CONFIG_AT76C50X_USB=m -CONFIG_WLAN_VENDOR_BROADCOM=y -CONFIG_B43=m -CONFIG_B43_BCMA=y -CONFIG_B43_SSB=y -CONFIG_B43_BUSES_BCMA_AND_SSB=y -# CONFIG_B43_BUSES_BCMA is not set -# CONFIG_B43_BUSES_SSB is not set -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_SDIO=y -CONFIG_B43_BCMA_PIO=y -CONFIG_B43_PIO=y -CONFIG_B43_PHY_G=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_HT=y -CONFIG_B43_LEDS=y -CONFIG_B43_HWRNG=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_HWRNG=y -CONFIG_B43LEGACY_DEBUG=y -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_BRCMUTIL=m -CONFIG_BRCMSMAC=m -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -CONFIG_BRCMFMAC_PROTO_MSGBUF=y -CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_USB=y -CONFIG_BRCMFMAC_PCIE=y -# CONFIG_BRCM_TRACING is not set -# CONFIG_BRCMDBG is not set -CONFIG_WLAN_VENDOR_CISCO=y -CONFIG_WLAN_VENDOR_INTEL=y -# CONFIG_IPW2100 is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m - -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -# end of iwl3945 / iwl4965 Debugging Options - -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -CONFIG_IWLDVM=m -CONFIG_IWLMVM=m -CONFIG_IWLWIFI_OPMODE_MODULAR=y -# CONFIG_IWLWIFI_BCAST_FILTERING is not set - -# -# Debugging Options -# -# CONFIG_IWLWIFI_DEBUG is not set -# CONFIG_IWLWIFI_DEVICE_TRACING is not set -# end of Debugging Options - -CONFIG_WLAN_VENDOR_INTERSIL=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -# CONFIG_HERMES is not set -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -# CONFIG_P54_SPI is not set -CONFIG_P54_LEDS=y -# CONFIG_PRISM54 is not set -CONFIG_WLAN_VENDOR_MARVELL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_SPI is not set -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -# CONFIG_MWIFIEX is not set -CONFIG_MWL8K=m -CONFIG_WLAN_VENDOR_MEDIATEK=y -CONFIG_MT7601U=m -# CONFIG_MT76x0U is not set -# CONFIG_MT76x0E is not set -# CONFIG_MT76x2E is not set -# CONFIG_MT76x2U is not set -# CONFIG_MT7603E is not set -# CONFIG_MT7615E is not set -CONFIG_WLAN_VENDOR_RALINK=y -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y -CONFIG_RT2800PCI_RT3290=y -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -# CONFIG_RT2800USB_UNKNOWN is not set -CONFIG_RT2800_LIB=m -CONFIG_RT2800_LIB_MMIO=m -CONFIG_RT2X00_LIB_MMIO=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set -CONFIG_WLAN_VENDOR_REALTEK=y -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m -CONFIG_RTL8723AE=m -CONFIG_RTL8723BE=m -CONFIG_RTL8188EE=m -CONFIG_RTL8192EE=m -CONFIG_RTL8821AE=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_PCI=m -CONFIG_RTLWIFI_USB=m -# CONFIG_RTLWIFI_DEBUG is not set -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8723_COMMON=m -CONFIG_RTLBTCOEXIST=m -CONFIG_RTL8XXXU=m -# CONFIG_RTL8XXXU_UNTESTED is not set -# CONFIG_RTW88 is not set -CONFIG_WLAN_VENDOR_RSI=y -CONFIG_RSI_91X=m -CONFIG_RSI_DEBUGFS=y -# CONFIG_RSI_SDIO is not set -CONFIG_RSI_USB=m -CONFIG_RSI_COEX=y -CONFIG_WLAN_VENDOR_ST=y -# CONFIG_CW1200 is not set -CONFIG_WLAN_VENDOR_TI=y -CONFIG_WL1251=m -CONFIG_WL1251_SPI=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SPI=m -CONFIG_WLCORE_SDIO=m -CONFIG_WILINK_PLATFORM_DATA=y -CONFIG_WLAN_VENDOR_ZYDAS=y -# CONFIG_USB_ZD1201 is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_WLAN_VENDOR_QUANTENNA=y -# CONFIG_QTNFMAC_PCIE is not set -CONFIG_MAC80211_HWSIM=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_VIRT_WIFI=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 -# end of WiMAX Wireless Broadband devices - -# CONFIG_WAN is not set -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKELB=m -CONFIG_IEEE802154_AT86RF230=m -# CONFIG_IEEE802154_AT86RF230_DEBUGFS is not set -CONFIG_IEEE802154_MRF24J40=m -CONFIG_IEEE802154_CC2520=m -CONFIG_IEEE802154_ATUSB=m -CONFIG_IEEE802154_ADF7242=m -# CONFIG_IEEE802154_CA8210 is not set -# CONFIG_IEEE802154_MCR20A is not set -# CONFIG_IEEE802154_HWSIM is not set -CONFIG_XEN_NETDEV_FRONTEND=m -CONFIG_XEN_NETDEV_BACKEND=m -# CONFIG_VMXNET3 is not set -CONFIG_NETDEVSIM=m -CONFIG_NET_FAILOVER=m -# CONFIG_ISDN is not set -# CONFIG_NVM is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=y -CONFIG_INPUT_FF_MEMLESS=m -CONFIG_INPUT_POLLDEV=m -CONFIG_INPUT_SPARSEKMAP=m -CONFIG_INPUT_MATRIXKMAP=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_APMPOWER is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ADC is not set -CONFIG_KEYBOARD_ADP5588=m -# CONFIG_KEYBOARD_ADP5589 is not set -CONFIG_KEYBOARD_ATKBD=y -CONFIG_KEYBOARD_QT1050=m -# CONFIG_KEYBOARD_QT1070 is not set -CONFIG_KEYBOARD_QT2160=m -# CONFIG_KEYBOARD_DLINK_DIR685 is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_KEYBOARD_GPIO_POLLED is not set -# CONFIG_KEYBOARD_TCA6416 is not set -# CONFIG_KEYBOARD_TCA8418 is not set -# CONFIG_KEYBOARD_MATRIX is not set -CONFIG_KEYBOARD_LM8323=m -# CONFIG_KEYBOARD_LM8333 is not set -CONFIG_KEYBOARD_MAX7359=m -# CONFIG_KEYBOARD_MCS is not set -# CONFIG_KEYBOARD_MPR121 is not set -CONFIG_KEYBOARD_SNVS_PWRKEY=m -CONFIG_KEYBOARD_IMX=m -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_KEYBOARD_TEGRA=m -CONFIG_KEYBOARD_OPENCORES=m -# CONFIG_KEYBOARD_SAMSUNG is not set -CONFIG_KEYBOARD_STOWAWAY=m -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_STMPE is not set -CONFIG_KEYBOARD_SUN4I_LRADC=m -CONFIG_KEYBOARD_IQS62X=m -CONFIG_KEYBOARD_OMAP4=m -# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set -CONFIG_KEYBOARD_TWL4030=m -# CONFIG_KEYBOARD_XTKBD is not set -CONFIG_KEYBOARD_CROS_EC=m -# CONFIG_KEYBOARD_CAP11XX is not set -# CONFIG_KEYBOARD_BCM is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_BYD=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y -CONFIG_MOUSE_PS2_SENTELIC=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -CONFIG_MOUSE_PS2_FOCALTECH=y -CONFIG_MOUSE_PS2_SMBUS=y -# CONFIG_MOUSE_SERIAL is not set -CONFIG_MOUSE_APPLETOUCH=m -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_CYAPA is not set -CONFIG_MOUSE_ELAN_I2C=m -CONFIG_MOUSE_ELAN_I2C_I2C=y -# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_USB_PEGASUS=m -CONFIG_TABLET_SERIAL_WACOM4=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_ADS7846=m -CONFIG_TOUCHSCREEN_AD7877=m -CONFIG_TOUCHSCREEN_AD7879=m -CONFIG_TOUCHSCREEN_AD7879_I2C=m -# CONFIG_TOUCHSCREEN_AD7879_SPI is not set -CONFIG_TOUCHSCREEN_ADC=m -# CONFIG_TOUCHSCREEN_AR1021_I2C is not set -CONFIG_TOUCHSCREEN_ATMEL_MXT=m -# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set -# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set -# CONFIG_TOUCHSCREEN_BU21013 is not set -# CONFIG_TOUCHSCREEN_BU21029 is not set -# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set -# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set -# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set -# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set -# CONFIG_TOUCHSCREEN_DA9052 is not set -CONFIG_TOUCHSCREEN_DYNAPRO=m -CONFIG_TOUCHSCREEN_HAMPSHIRE=m -# CONFIG_TOUCHSCREEN_EETI is not set -# CONFIG_TOUCHSCREEN_EGALAX is not set -# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set -CONFIG_TOUCHSCREEN_EXC3000=m -CONFIG_TOUCHSCREEN_FUJITSU=m -CONFIG_TOUCHSCREEN_GOODIX=m -CONFIG_TOUCHSCREEN_HIDEEP=m -# CONFIG_TOUCHSCREEN_ILI210X is not set -CONFIG_TOUCHSCREEN_S6SY761=m -CONFIG_TOUCHSCREEN_GUNZE=m -# CONFIG_TOUCHSCREEN_EKTF2127 is not set -# CONFIG_TOUCHSCREEN_ELAN is not set -CONFIG_TOUCHSCREEN_ELO=m -CONFIG_TOUCHSCREEN_WACOM_W8001=m -# CONFIG_TOUCHSCREEN_WACOM_I2C is not set -# CONFIG_TOUCHSCREEN_MAX11801 is not set -CONFIG_TOUCHSCREEN_MCS5000=m -# CONFIG_TOUCHSCREEN_MMS114 is not set -# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set -CONFIG_TOUCHSCREEN_MTOUCH=m -# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set -CONFIG_TOUCHSCREEN_INEXIO=m -CONFIG_TOUCHSCREEN_MK712=m -CONFIG_TOUCHSCREEN_PENMOUNT=m -# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set -CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=m -CONFIG_TOUCHSCREEN_TOUCHRIGHT=m -CONFIG_TOUCHSCREEN_TOUCHWIN=m -CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m -# CONFIG_TOUCHSCREEN_PIXCIR is not set -# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_TOUCHSCREEN_MC13783=m -CONFIG_TOUCHSCREEN_USB_EGALAX=y -CONFIG_TOUCHSCREEN_USB_PANJIT=y -CONFIG_TOUCHSCREEN_USB_3M=y -CONFIG_TOUCHSCREEN_USB_ITM=y -CONFIG_TOUCHSCREEN_USB_ETURBO=y -CONFIG_TOUCHSCREEN_USB_GUNZE=y -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y -CONFIG_TOUCHSCREEN_USB_GOTOP=y -CONFIG_TOUCHSCREEN_USB_JASTEC=y -CONFIG_TOUCHSCREEN_USB_ELO=y -CONFIG_TOUCHSCREEN_USB_E2I=y -CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y -CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y -CONFIG_TOUCHSCREEN_USB_NEXIO=y -CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y -CONFIG_TOUCHSCREEN_TOUCHIT213=m -# CONFIG_TOUCHSCREEN_TS4800 is not set -# CONFIG_TOUCHSCREEN_TSC_SERIO is not set -CONFIG_TOUCHSCREEN_TSC200X_CORE=m -# CONFIG_TOUCHSCREEN_TSC2004 is not set -CONFIG_TOUCHSCREEN_TSC2005=m -CONFIG_TOUCHSCREEN_TSC2007=m -# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set -# CONFIG_TOUCHSCREEN_RM_TS is not set -# CONFIG_TOUCHSCREEN_SILEAD is not set -# CONFIG_TOUCHSCREEN_SIS_I2C is not set -# CONFIG_TOUCHSCREEN_ST1232 is not set -# CONFIG_TOUCHSCREEN_STMFTS is not set -CONFIG_TOUCHSCREEN_STMPE=m -CONFIG_TOUCHSCREEN_SUN4I=m -CONFIG_TOUCHSCREEN_SUR40=m -# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set -# CONFIG_TOUCHSCREEN_SX8654 is not set -CONFIG_TOUCHSCREEN_TPS6507X=m -# CONFIG_TOUCHSCREEN_ZET6223 is not set -# CONFIG_TOUCHSCREEN_ZFORCE is not set -# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set -# CONFIG_TOUCHSCREEN_IQS5XX is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_ATMEL_CAPTOUCH is not set -# CONFIG_INPUT_BMA150 is not set -# CONFIG_INPUT_E3X0_BUTTON is not set -# CONFIG_INPUT_MSM_VIBRATOR is not set -# CONFIG_INPUT_MC13783_PWRBUTTON is not set -CONFIG_INPUT_MMA8450=m -# CONFIG_INPUT_GP2A is not set -# CONFIG_INPUT_GPIO_BEEPER is not set -# CONFIG_INPUT_GPIO_DECODER is not set -# CONFIG_INPUT_GPIO_VIBRA is not set -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -# CONFIG_INPUT_KXTJ9 is not set -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -# CONFIG_INPUT_REGULATOR_HAPTIC is not set -CONFIG_INPUT_AXP20X_PEK=m -CONFIG_INPUT_TWL4030_PWRBUTTON=m -CONFIG_INPUT_TWL4030_VIBRA=m -CONFIG_INPUT_TWL6040_VIBRA=m -CONFIG_INPUT_UINPUT=m -# CONFIG_INPUT_PALMAS_PWRBUTTON is not set -# CONFIG_INPUT_PCF8574 is not set -# CONFIG_INPUT_PWM_BEEPER is not set -# CONFIG_INPUT_PWM_VIBRA is not set -CONFIG_INPUT_RK805_PWRKEY=m -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_DA9052_ONKEY is not set -# CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_IMS_PCU is not set -# CONFIG_INPUT_CMA3000 is not set -CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y -# CONFIG_INPUT_DRV260X_HAPTICS is not set -# CONFIG_INPUT_DRV2665_HAPTICS is not set -# CONFIG_INPUT_DRV2667_HAPTICS is not set -CONFIG_RMI4_CORE=m -# CONFIG_RMI4_I2C is not set -# CONFIG_RMI4_SPI is not set -# CONFIG_RMI4_SMB is not set -CONFIG_RMI4_F03=y -CONFIG_RMI4_F03_SERIO=m -CONFIG_RMI4_2D_SENSOR=y -CONFIG_RMI4_F11=y -CONFIG_RMI4_F12=y -CONFIG_RMI4_F30=y -# CONFIG_RMI4_F34 is not set -# CONFIG_RMI4_F54 is not set -# CONFIG_RMI4_F55 is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_AMBAKMI=m -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_ALTERA_PS2=m -# CONFIG_SERIO_PS2MULT is not set -# CONFIG_SERIO_ARC_PS2 is not set -# CONFIG_SERIO_APBPS2 is not set -CONFIG_SERIO_SUN4I_PS2=m -CONFIG_SERIO_GPIO_PS2=m -# CONFIG_USERIO is not set -# CONFIG_GAMEPORT is not set -# end of Hardware I/O ports -# end of Input device support - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_LDISC_AUTOLOAD=y - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_16550A_VARIANTS=y -# CONFIG_SERIAL_8250_FINTEK is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_EXAR=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_ASPEED_VUART is not set -CONFIG_SERIAL_8250_DWLIB=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_DW=y -# CONFIG_SERIAL_8250_EM is not set -# CONFIG_SERIAL_8250_RT288X is not set -# CONFIG_SERIAL_8250_OMAP is not set -CONFIG_SERIAL_8250_TEGRA=y -CONFIG_SERIAL_OF_PLATFORM=y - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_UARTS_4=y -CONFIG_SERIAL_SAMSUNG_UARTS=4 -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_SERIAL_TEGRA=y -# CONFIG_SERIAL_MAX3100 is not set -# CONFIG_SERIAL_MAX310X is not set -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_VT8500=y -CONFIG_SERIAL_VT8500_CONSOLE=y -CONFIG_SERIAL_OMAP=y -CONFIG_SERIAL_OMAP_CONSOLE=y -# CONFIG_SERIAL_SIFIVE is not set -# CONFIG_SERIAL_SCCNXP is not set -# CONFIG_SERIAL_SC16IS7XX is not set -# CONFIG_SERIAL_BCM63XX is not set -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -# CONFIG_SERIAL_IFX6X60 is not set -# CONFIG_SERIAL_XILINX_PS_UART is not set -CONFIG_SERIAL_ARC=y -CONFIG_SERIAL_ARC_CONSOLE=y -CONFIG_SERIAL_ARC_NR_PORTS=1 -CONFIG_SERIAL_RP2=m -CONFIG_SERIAL_RP2_NR_UARTS=32 -# CONFIG_SERIAL_FSL_LPUART is not set -# CONFIG_SERIAL_FSL_LINFLEXUART is not set -# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set -# CONFIG_SERIAL_ST_ASC is not set -# CONFIG_SERIAL_SPRD is not set -# CONFIG_SERIAL_MVEBU_UART is not set -# end of Serial drivers - -CONFIG_SERIAL_MCTRL_GPIO=y -# CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_N_GSM=m -CONFIG_NOZOMI=m -CONFIG_NULL_TTY=m -# CONFIG_TRACE_SINK is not set -CONFIG_HVC_DRIVER=y -CONFIG_HVC_IRQ=y -CONFIG_HVC_XEN=y -CONFIG_HVC_XEN_FRONTEND=y -# CONFIG_HVC_DCC is not set -# CONFIG_SERIAL_DEV_BUS is not set -CONFIG_TTY_PRINTK=m -CONFIG_TTY_PRINTK_LEVEL=6 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -CONFIG_VIRTIO_CONSOLE=m -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -CONFIG_HW_RANDOM_BCM2835=m -CONFIG_HW_RANDOM_IPROC_RNG200=m -CONFIG_HW_RANDOM_OMAP=m -CONFIG_HW_RANDOM_OMAP3_ROM=m -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_HW_RANDOM_EXYNOS=m -# CONFIG_APPLICOM is not set -CONFIG_DEVMEM=y -# CONFIG_DEVKMEM is not set -# CONFIG_RAW_DRIVER is not set -CONFIG_DEVPORT=y -CONFIG_TCG_TPM=y -# CONFIG_TCG_TIS is not set -# CONFIG_TCG_TIS_SPI is not set -# CONFIG_TCG_TIS_I2C_ATMEL is not set -# CONFIG_TCG_TIS_I2C_INFINEON is not set -# CONFIG_TCG_TIS_I2C_NUVOTON is not set -# CONFIG_TCG_XEN is not set -# CONFIG_TCG_VTPM_PROXY is not set -# CONFIG_TCG_TIS_ST33ZP24_I2C is not set -# CONFIG_TCG_TIS_ST33ZP24_SPI is not set -# CONFIG_XILLYBUS is not set -# end of Character devices - -# CONFIG_RANDOM_TRUST_BOOTLOADER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_MUX=y - -# -# Multiplexer I2C Chip support -# -CONFIG_I2C_ARB_GPIO_CHALLENGE=m -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_GPMUX is not set -# CONFIG_I2C_MUX_LTC4306 is not set -# CONFIG_I2C_MUX_PCA9541 is not set -CONFIG_I2C_MUX_PCA954x=m -# CONFIG_I2C_MUX_PINCTRL is not set -# CONFIG_I2C_MUX_REG is not set -# CONFIG_I2C_DEMUX_PINCTRL is not set -# CONFIG_I2C_MUX_MLXCPLD is not set -# end of Multiplexer I2C Chip support - -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_SMBUS=m -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -CONFIG_I2C_ISCH=m -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_NVIDIA_GPU is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_ALTERA=m -CONFIG_I2C_BCM2835=m -# CONFIG_I2C_CBUS_GPIO is not set -# CONFIG_I2C_DESIGNWARE_PLATFORM is not set -# CONFIG_I2C_DESIGNWARE_PCI is not set -# CONFIG_I2C_EMEV2 is not set -CONFIG_I2C_EXYNOS5=m -CONFIG_I2C_GPIO=y -# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set -CONFIG_I2C_IMX=m -# CONFIG_I2C_IMX_LPI2C is not set -CONFIG_I2C_MV64XXX=m -# CONFIG_I2C_NOMADIK is not set -CONFIG_I2C_OCORES=m -CONFIG_I2C_OMAP=y -CONFIG_I2C_PCA_PLATFORM=m -# CONFIG_I2C_PXA is not set -CONFIG_I2C_RK3X=m -CONFIG_HAVE_S3C2410_I2C=y -CONFIG_I2C_S3C2410=y -CONFIG_I2C_SIMTEC=m -CONFIG_I2C_SUN6I_P2WI=m -CONFIG_I2C_TEGRA=y -CONFIG_I2C_VERSATILE=m -# CONFIG_I2C_WMT is not set -# CONFIG_I2C_XILINX is not set - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_DIOLAN_U2C=m -# CONFIG_I2C_PARPORT is not set -CONFIG_I2C_ROBOTFUZZ_OSIF=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m -CONFIG_I2C_VIPERBOARD=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_CROS_EC_TUNNEL=m -# end of I2C Hardware Bus support - -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_SLAVE is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# end of I2C support - -# CONFIG_I3C is not set -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_ALTERA is not set -# CONFIG_SPI_ARMADA_3700 is not set -# CONFIG_SPI_AXI_SPI_ENGINE is not set -CONFIG_SPI_BCM2835=m -CONFIG_SPI_BCM2835AUX=m -# CONFIG_SPI_BCM_QSPI is not set -CONFIG_SPI_BITBANG=y -CONFIG_SPI_BUTTERFLY=m -# CONFIG_SPI_CADENCE is not set -# CONFIG_SPI_DESIGNWARE is not set -# CONFIG_SPI_FSL_LPSPI is not set -# CONFIG_SPI_FSL_QUADSPI is not set -# CONFIG_SPI_NXP_FLEXSPI is not set -CONFIG_SPI_GPIO=y -CONFIG_SPI_IMX=m -CONFIG_SPI_LM70_LLP=m -# CONFIG_SPI_FSL_SPI is not set -# CONFIG_SPI_OC_TINY is not set -CONFIG_SPI_OMAP24XX=m -CONFIG_SPI_TI_QSPI=m -CONFIG_SPI_ORION=m -CONFIG_SPI_PL022=m -# CONFIG_SPI_PXA2XX is not set -CONFIG_SPI_ROCKCHIP=m -# CONFIG_SPI_S3C64XX is not set -# CONFIG_SPI_SC18IS602 is not set -# CONFIG_SPI_SIFIVE is not set -CONFIG_SPI_SUN4I=m -CONFIG_SPI_SUN6I=m -CONFIG_SPI_MXIC=m -CONFIG_SPI_TEGRA114=m -CONFIG_SPI_TEGRA20_SFLASH=m -# CONFIG_SPI_TEGRA20_SLINK is not set -# CONFIG_SPI_XCOMM is not set -# CONFIG_SPI_XILINX is not set -# CONFIG_SPI_ZYNQMP_GQSPI is not set - -# -# SPI Multiplexer support -# -CONFIG_SPI_MUX=m - -# -# SPI Protocol Masters -# -CONFIG_SPI_SPIDEV=y -# CONFIG_SPI_LOOPBACK_TEST is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_SPI_SLAVE is not set -# CONFIG_SPMI is not set -CONFIG_HSI=m -CONFIG_HSI_BOARDINFO=y - -# -# HSI controllers -# -CONFIG_OMAP_SSI=m - -# -# HSI clients -# -CONFIG_NOKIA_MODEM=m -CONFIG_CMT_SPEECH=m -CONFIG_SSI_PROTOCOL=m -# CONFIG_HSI_CHAR is not set -CONFIG_PPS=y -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -# CONFIG_PPS_CLIENT_GPIO is not set - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=y -CONFIG_PTP_1588_CLOCK_QORIQ=m - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -CONFIG_PTP_1588_CLOCK_IDT82P33=m -CONFIG_PTP_1588_CLOCK_IDTCM=m -# end of PTP clock support - -CONFIG_PINCTRL=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_PINMUX=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AS3722=y -CONFIG_PINCTRL_AXP209=m -# CONFIG_PINCTRL_AMD is not set -CONFIG_PINCTRL_MCP23S08=m -CONFIG_PINCTRL_ROCKCHIP=y -CONFIG_PINCTRL_SINGLE=y -# CONFIG_PINCTRL_SX150X is not set -# CONFIG_PINCTRL_STMFX is not set -CONFIG_PINCTRL_PALMAS=y -CONFIG_PINCTRL_RK805=m -# CONFIG_PINCTRL_OCELOT is not set -CONFIG_PINCTRL_BCM2835=y -CONFIG_PINCTRL_IMX=y -CONFIG_PINCTRL_IMX51=y -CONFIG_PINCTRL_IMX53=y -CONFIG_PINCTRL_IMX6Q=y -CONFIG_PINCTRL_IMX8MM=y -CONFIG_PINCTRL_IMX8MN=y -CONFIG_PINCTRL_IMX8MP=y -CONFIG_PINCTRL_IMX8MQ=y -CONFIG_PINCTRL_MVEBU=y -CONFIG_PINCTRL_ARMADA_370=y -CONFIG_PINCTRL_ARMADA_375=y -CONFIG_PINCTRL_ARMADA_38X=y -CONFIG_PINCTRL_ARMADA_39X=y -CONFIG_PINCTRL_ARMADA_XP=y -CONFIG_PINCTRL_SAMSUNG=y -CONFIG_PINCTRL_EXYNOS=y -CONFIG_PINCTRL_EXYNOS_ARM=y -CONFIG_PINCTRL_SUNXI=y -CONFIG_PINCTRL_SUN4I_A10=y -CONFIG_PINCTRL_SUN5I=y -CONFIG_PINCTRL_SUN6I_A31=y -CONFIG_PINCTRL_SUN6I_A31_R=y -CONFIG_PINCTRL_SUN8I_A23=y -CONFIG_PINCTRL_SUN8I_A33=y -CONFIG_PINCTRL_SUN8I_A83T=y -CONFIG_PINCTRL_SUN8I_A83T_R=y -CONFIG_PINCTRL_SUN8I_A23_R=y -CONFIG_PINCTRL_SUN8I_H3=y -CONFIG_PINCTRL_SUN8I_H3_R=y -CONFIG_PINCTRL_SUN8I_V3S=y -CONFIG_PINCTRL_SUN9I_A80=y -CONFIG_PINCTRL_SUN9I_A80_R=y -# CONFIG_PINCTRL_SUN50I_A64 is not set -# CONFIG_PINCTRL_SUN50I_A64_R is not set -# CONFIG_PINCTRL_SUN50I_H5 is not set -# CONFIG_PINCTRL_SUN50I_H6 is not set -# CONFIG_PINCTRL_SUN50I_H6_R is not set -CONFIG_PINCTRL_TEGRA=y -CONFIG_PINCTRL_TEGRA124=y -CONFIG_PINCTRL_TEGRA_XUSB=y -CONFIG_PINCTRL_TI_IODELAY=y -CONFIG_PINCTRL_WMT=y -CONFIG_PINCTRL_WM8850=y -CONFIG_PINCTRL_MADERA=m -CONFIG_PINCTRL_EQUILIBRIUM=m -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_FASTPATH_LIMIT=512 -CONFIG_OF_GPIO=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=y - -# -# Memory mapped GPIO drivers -# -# CONFIG_GPIO_74XX_MMIO is not set -# CONFIG_GPIO_ALTERA is not set -CONFIG_GPIO_RASPBERRYPI_EXP=m -CONFIG_GPIO_CADENCE=m -# CONFIG_GPIO_DWAPB is not set -# CONFIG_GPIO_EXAR is not set -# CONFIG_GPIO_FTGPIO010 is not set -CONFIG_GPIO_GENERIC_PLATFORM=y -# CONFIG_GPIO_GRGPIO is not set -# CONFIG_GPIO_HLWD is not set -CONFIG_GPIO_LOGICVC=m -CONFIG_GPIO_MB86S7X=m -# CONFIG_GPIO_MPC8XXX is not set -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_MXC=y -CONFIG_GPIO_OMAP=y -CONFIG_GPIO_PL061=y -# CONFIG_GPIO_SAMA5D2_PIOBU is not set -CONFIG_GPIO_SIFIVE=y -# CONFIG_GPIO_SYSCON is not set -CONFIG_GPIO_TEGRA=y -# CONFIG_GPIO_TS4800 is not set -CONFIG_GPIO_XILINX=m -# CONFIG_GPIO_ZEVIO is not set -# CONFIG_GPIO_AMD_FCH is not set -# end of Memory mapped GPIO drivers - -# -# I2C GPIO expanders -# -# CONFIG_GPIO_ADP5588 is not set -# CONFIG_GPIO_ADNP is not set -# CONFIG_GPIO_GW_PLD is not set -# CONFIG_GPIO_MAX7300 is not set -# CONFIG_GPIO_MAX732X is not set -CONFIG_GPIO_PCA953X=m -CONFIG_GPIO_PCF857X=m -# CONFIG_GPIO_TPIC2810 is not set -# CONFIG_GPIO_TS4900 is not set -# end of I2C GPIO expanders - -# -# MFD GPIO expanders -# -CONFIG_GPIO_BD70528=m -CONFIG_GPIO_BD71828=m -CONFIG_GPIO_BD9571MWV=m -CONFIG_GPIO_DA9052=m -# CONFIG_HTC_EGPIO is not set -CONFIG_GPIO_MADERA=m -CONFIG_GPIO_PALMAS=y -# CONFIG_GPIO_STMPE is not set -CONFIG_GPIO_TWL4030=y -CONFIG_GPIO_TWL6040=y -# end of MFD GPIO expanders - -# -# PCI GPIO expanders -# -# CONFIG_GPIO_PCI_IDIO_16 is not set -# CONFIG_GPIO_PCIE_IDIO_24 is not set -# CONFIG_GPIO_RDC321X is not set -# end of PCI GPIO expanders - -# -# SPI GPIO expanders -# -# CONFIG_GPIO_74X164 is not set -CONFIG_GPIO_MAX3191X=m -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MC33880 is not set -# CONFIG_GPIO_PISOSR is not set -# CONFIG_GPIO_XRA1403 is not set -# end of SPI GPIO expanders - -# -# USB GPIO expanders -# -CONFIG_GPIO_VIPERBOARD=m -# end of USB GPIO expanders - -# CONFIG_GPIO_MOCKUP is not set -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -# CONFIG_W1_MASTER_MATROX is not set -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -# CONFIG_W1_MASTER_MXC is not set -# CONFIG_W1_MASTER_DS1WM is not set -CONFIG_W1_MASTER_GPIO=m -CONFIG_HDQ_MASTER_OMAP=m -# CONFIG_W1_MASTER_SGI is not set -# end of 1-wire Bus Masters - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -# CONFIG_W1_SLAVE_DS2405 is not set -# CONFIG_W1_SLAVE_DS2408 is not set -# CONFIG_W1_SLAVE_DS2413 is not set -# CONFIG_W1_SLAVE_DS2406 is not set -# CONFIG_W1_SLAVE_DS2423 is not set -CONFIG_W1_SLAVE_DS2805=m -CONFIG_W1_SLAVE_DS2430=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -# CONFIG_W1_SLAVE_DS2433_CRC is not set -# CONFIG_W1_SLAVE_DS2438 is not set -# CONFIG_W1_SLAVE_DS250X is not set -# CONFIG_W1_SLAVE_DS2780 is not set -# CONFIG_W1_SLAVE_DS2781 is not set -# CONFIG_W1_SLAVE_DS28E04 is not set -CONFIG_W1_SLAVE_DS28E17=m -# end of 1-wire Slaves - -CONFIG_POWER_AVS=y -CONFIG_QCOM_CPR=m -CONFIG_ROCKCHIP_IODOMAIN=m -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_AS3722=y -# CONFIG_POWER_RESET_BRCMKONA is not set -# CONFIG_POWER_RESET_BRCMSTB is not set -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_GPIO_RESTART=y -# CONFIG_POWER_RESET_LTC2952 is not set -# CONFIG_POWER_RESET_QNAP is not set -CONFIG_POWER_RESET_RESTART=y -# CONFIG_POWER_RESET_VERSATILE is not set -CONFIG_POWER_RESET_VEXPRESS=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_POWER_RESET_SYSCON_POWEROFF=y -CONFIG_REBOOT_MODE=m -# CONFIG_SYSCON_REBOOT_MODE is not set -CONFIG_NVMEM_REBOOT_MODE=m -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_POWER_SUPPLY_HWMON=y -# CONFIG_PDA_POWER is not set -# CONFIG_APM_POWER is not set -# CONFIG_GENERIC_ADC_BATTERY is not set -# CONFIG_TEST_POWER is not set -CONFIG_CHARGER_ADP5061=m -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_BATTERY_DS2780 is not set -# CONFIG_BATTERY_DS2781 is not set -# CONFIG_BATTERY_DS2782 is not set -# CONFIG_BATTERY_LEGO_EV3 is not set -CONFIG_BATTERY_SBS=m -# CONFIG_CHARGER_SBS is not set -CONFIG_MANAGER_SBS=m -CONFIG_BATTERY_BQ27XXX=m -CONFIG_BATTERY_BQ27XXX_I2C=m -CONFIG_BATTERY_BQ27XXX_HDQ=m -# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set -# CONFIG_BATTERY_DA9052 is not set -CONFIG_CHARGER_AXP20X=m -CONFIG_BATTERY_AXP20X=m -CONFIG_AXP20X_POWER=m -CONFIG_AXP288_FUEL_GAUGE=m -# CONFIG_BATTERY_MAX17040 is not set -# CONFIG_BATTERY_MAX17042 is not set -CONFIG_BATTERY_MAX1721X=m -CONFIG_BATTERY_TWL4030_MADC=m -CONFIG_BATTERY_RX51=m -CONFIG_CHARGER_ISP1704=m -# CONFIG_CHARGER_MAX8903 is not set -CONFIG_CHARGER_TWL4030=m -# CONFIG_CHARGER_LP8727 is not set -CONFIG_CHARGER_GPIO=m -# CONFIG_CHARGER_MANAGER is not set -# CONFIG_CHARGER_LT3651 is not set -# CONFIG_CHARGER_DETECTOR_MAX14656 is not set -CONFIG_CHARGER_BQ2415X=m -# CONFIG_CHARGER_BQ24190 is not set -# CONFIG_CHARGER_BQ24257 is not set -# CONFIG_CHARGER_BQ24735 is not set -# CONFIG_CHARGER_BQ25890 is not set -# CONFIG_CHARGER_SMB347 is not set -# CONFIG_BATTERY_GAUGE_LTC2941 is not set -# CONFIG_CHARGER_RT9455 is not set -CONFIG_CHARGER_CROS_USBPD=m -# CONFIG_CHARGER_UCS1002 is not set -# CONFIG_CHARGER_BD70528 is not set -CONFIG_HWMON=y -CONFIG_HWMON_VID=m -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -# CONFIG_SENSORS_AD7314 is not set -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -CONFIG_SENSORS_ADM1029=m -# CONFIG_SENSORS_ADM1031 is not set -CONFIG_SENSORS_ADM1177=m -CONFIG_SENSORS_ADM9240=m -# CONFIG_SENSORS_ADT7310 is not set -# CONFIG_SENSORS_ADT7410 is not set -CONFIG_SENSORS_ADT7411=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7475=m -# CONFIG_SENSORS_AS370 is not set -CONFIG_SENSORS_ASC7621=m -CONFIG_SENSORS_AXI_FAN_CONTROL=m -CONFIG_SENSORS_ARM_SCMI=m -# CONFIG_SENSORS_ASPEED is not set -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DRIVETEMP=m -CONFIG_SENSORS_DS620=m -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_DA9052_ADC is not set -CONFIG_SENSORS_I5K_AMB=m -# CONFIG_SENSORS_F71805F is not set -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_MC13783_ADC=m -CONFIG_SENSORS_FTSTEUTATES=m -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -CONFIG_SENSORS_G760A=m -CONFIG_SENSORS_G762=m -CONFIG_SENSORS_GPIO_FAN=m -# CONFIG_SENSORS_HIH6130 is not set -# CONFIG_SENSORS_IIO_HWMON is not set -# CONFIG_SENSORS_IT87 is not set -CONFIG_SENSORS_JC42=m -# CONFIG_SENSORS_POWR1220 is not set -CONFIG_SENSORS_LINEAGE=m -# CONFIG_SENSORS_LTC2945 is not set -CONFIG_SENSORS_LTC2947=m -CONFIG_SENSORS_LTC2947_I2C=m -CONFIG_SENSORS_LTC2947_SPI=m -# CONFIG_SENSORS_LTC2990 is not set -CONFIG_SENSORS_LTC4151=m -CONFIG_SENSORS_LTC4215=m -# CONFIG_SENSORS_LTC4222 is not set -CONFIG_SENSORS_LTC4245=m -# CONFIG_SENSORS_LTC4260 is not set -CONFIG_SENSORS_LTC4261=m -CONFIG_SENSORS_MAX1111=m -CONFIG_SENSORS_MAX16065=m -# CONFIG_SENSORS_MAX1619 is not set -CONFIG_SENSORS_MAX1668=m -# CONFIG_SENSORS_MAX197 is not set -# CONFIG_SENSORS_MAX31722 is not set -CONFIG_SENSORS_MAX31730=m -CONFIG_SENSORS_MAX6621=m -CONFIG_SENSORS_MAX6639=m -CONFIG_SENSORS_MAX6642=m -CONFIG_SENSORS_MAX6650=m -# CONFIG_SENSORS_MAX6697 is not set -# CONFIG_SENSORS_MAX31790 is not set -# CONFIG_SENSORS_MCP3021 is not set -# CONFIG_SENSORS_TC654 is not set -CONFIG_SENSORS_ADCXX=m -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM70=m -CONFIG_SENSORS_LM73=m -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -CONFIG_SENSORS_LM93=m -# CONFIG_SENSORS_LM95234 is not set -CONFIG_SENSORS_LM95241=m -CONFIG_SENSORS_LM95245=m -# CONFIG_SENSORS_PC87360 is not set -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_SENSORS_NCT6683=m -CONFIG_SENSORS_NCT6775=m -# CONFIG_SENSORS_NCT7802 is not set -# CONFIG_SENSORS_NCT7904 is not set -# CONFIG_SENSORS_NPCM7XX is not set -# CONFIG_SENSORS_OCC_P8_I2C is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_PMBUS is not set -CONFIG_SENSORS_PWM_FAN=m -CONFIG_SENSORS_RASPBERRYPI_HWMON=m -# CONFIG_SENSORS_SHT15 is not set -CONFIG_SENSORS_SHT21=m -# CONFIG_SENSORS_SHT3x is not set -# CONFIG_SENSORS_SHTC1 is not set -# CONFIG_SENSORS_SIS5595 is not set -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_EMC1403=m -CONFIG_SENSORS_EMC2103=m -CONFIG_SENSORS_EMC6W201=m -# CONFIG_SENSORS_SMSC47M1 is not set -CONFIG_SENSORS_SMSC47M192=m -# CONFIG_SENSORS_SMSC47B397 is not set -CONFIG_SENSORS_SCH56XX_COMMON=m -CONFIG_SENSORS_SCH5627=m -# CONFIG_SENSORS_SCH5636 is not set -# CONFIG_SENSORS_STTS751 is not set -CONFIG_SENSORS_SMM665=m -# CONFIG_SENSORS_ADC128D818 is not set -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_ADS7871=m -CONFIG_SENSORS_AMC6821=m -# CONFIG_SENSORS_INA209 is not set -# CONFIG_SENSORS_INA2XX is not set -# CONFIG_SENSORS_INA3221 is not set -# CONFIG_SENSORS_TC74 is not set -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_TMP102=m -# CONFIG_SENSORS_TMP103 is not set -# CONFIG_SENSORS_TMP108 is not set -CONFIG_SENSORS_TMP401=m -CONFIG_SENSORS_TMP421=m -CONFIG_SENSORS_TMP513=m -# CONFIG_SENSORS_VEXPRESS is not set -# CONFIG_SENSORS_VIA686A is not set -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83773G=m -# CONFIG_SENSORS_W83781D is not set -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83795=m -# CONFIG_SENSORS_W83795_FANCTRL is not set -# CONFIG_SENSORS_W83L785TS is not set -CONFIG_SENSORS_W83L786NG=m -# CONFIG_SENSORS_W83627HF is not set -CONFIG_SENSORS_W83627EHF=m -CONFIG_THERMAL=y -# CONFIG_THERMAL_STATISTICS is not set -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -# CONFIG_THERMAL_WRITABLE_TRIPS is not set -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -# CONFIG_THERMAL_GOV_BANG_BANG is not set -# CONFIG_THERMAL_GOV_USER_SPACE is not set -# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set -CONFIG_CPU_THERMAL=y -CONFIG_CPU_FREQ_THERMAL=y -# CONFIG_CLOCK_THERMAL is not set -# CONFIG_DEVFREQ_THERMAL is not set -# CONFIG_THERMAL_EMULATION is not set -# CONFIG_THERMAL_MMIO is not set -# CONFIG_IMX_THERMAL is not set -CONFIG_IMX8MM_THERMAL=m -# CONFIG_QORIQ_THERMAL is not set -CONFIG_SUN8I_THERMAL=m -CONFIG_ROCKCHIP_THERMAL=m -CONFIG_ARMADA_THERMAL=y - -# -# Broadcom thermal drivers -# -CONFIG_BCM2711_THERMAL=m -CONFIG_BCM2835_THERMAL=m -# end of Broadcom thermal drivers - -# -# Texas Instruments thermal drivers -# -CONFIG_TI_SOC_THERMAL=m -CONFIG_TI_THERMAL=y -# CONFIG_OMAP3_THERMAL is not set -CONFIG_OMAP4_THERMAL=y -CONFIG_OMAP5_THERMAL=y -CONFIG_DRA752_THERMAL=y -# end of Texas Instruments thermal drivers - -# -# Samsung thermal drivers -# -CONFIG_EXYNOS_THERMAL=y -# end of Samsung thermal drivers - -# -# NVIDIA Tegra thermal drivers -# -CONFIG_TEGRA_SOCTHERM=y -# end of NVIDIA Tegra thermal drivers - -# CONFIG_GENERIC_ADC_THERMAL is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y -CONFIG_WATCHDOG_OPEN_TIMEOUT=0 -CONFIG_WATCHDOG_SYSFS=y - -# -# Watchdog Pretimeout Governors -# -# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -CONFIG_BD70528_WATCHDOG=m -CONFIG_DA9052_WATCHDOG=m -# CONFIG_GPIO_WATCHDOG is not set -# CONFIG_XILINX_WATCHDOG is not set -# CONFIG_ZIIRAVE_WATCHDOG is not set -CONFIG_ARM_SP805_WATCHDOG=m -# CONFIG_ARMADA_37XX_WATCHDOG is not set -# CONFIG_CADENCE_WATCHDOG is not set -CONFIG_FTWDT010_WATCHDOG=m -CONFIG_HAVE_S3C2410_WATCHDOG=y -CONFIG_S3C2410_WATCHDOG=m -CONFIG_DW_WATCHDOG=m -CONFIG_OMAP_WATCHDOG=m -CONFIG_ORION_WATCHDOG=m -CONFIG_SUNXI_WATCHDOG=m -CONFIG_TWL4030_WATCHDOG=m -# CONFIG_TS4800_WATCHDOG is not set -# CONFIG_MAX63XX_WATCHDOG is not set -CONFIG_IMX2_WDT=m -CONFIG_IMX7ULP_WDT=m -CONFIG_TEGRA_WATCHDOG=m -# CONFIG_ALIM7101_WDT is not set -# CONFIG_I6300ESB_WDT is not set -CONFIG_BCM2835_WDT=m -# CONFIG_MEN_A21_WDT is not set -CONFIG_XEN_WDT=m - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_SDIOHOST_POSSIBLE=y -CONFIG_SSB_SDIOHOST=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y -# CONFIG_SSB_DRIVER_GPIO is not set -CONFIG_BCMA_POSSIBLE=y -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_PCI=y -# CONFIG_BCMA_HOST_SOC is not set -CONFIG_BCMA_DRIVER_PCI=y -# CONFIG_BCMA_DRIVER_GMAC_CMN is not set -# CONFIG_BCMA_DRIVER_GPIO is not set -# CONFIG_BCMA_DEBUG is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -# CONFIG_MFD_ALTERA_A10SR is not set -# CONFIG_MFD_ALTERA_SYSMGR is not set -# CONFIG_MFD_ACT8945A is not set -# CONFIG_MFD_SUN4I_GPADC is not set -# CONFIG_MFD_AS3711 is not set -CONFIG_MFD_AS3722=y -# CONFIG_PMIC_ADP5520 is not set -# CONFIG_MFD_AAT2870_CORE is not set -# CONFIG_MFD_ATMEL_FLEXCOM is not set -# CONFIG_MFD_ATMEL_HLCDC is not set -# CONFIG_MFD_BCM590XX is not set -CONFIG_MFD_BD9571MWV=m -# CONFIG_MFD_AC100 is not set -CONFIG_MFD_AXP20X=y -CONFIG_MFD_AXP20X_I2C=y -# CONFIG_MFD_AXP20X_RSB is not set -CONFIG_MFD_CROS_EC_DEV=m -CONFIG_MFD_MADERA=m -CONFIG_MFD_MADERA_I2C=m -CONFIG_MFD_MADERA_SPI=m -# CONFIG_MFD_CS47L15 is not set -# CONFIG_MFD_CS47L35 is not set -# CONFIG_MFD_CS47L85 is not set -# CONFIG_MFD_CS47L90 is not set -# CONFIG_MFD_CS47L92 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_PMIC_DA903X is not set -CONFIG_PMIC_DA9052=y -CONFIG_MFD_DA9052_SPI=y -CONFIG_MFD_DA9052_I2C=y -# CONFIG_MFD_DA9055 is not set -# CONFIG_MFD_DA9062 is not set -# CONFIG_MFD_DA9063 is not set -# CONFIG_MFD_DA9150 is not set -# CONFIG_MFD_DLN2 is not set -# CONFIG_MFD_EXYNOS_LPASS is not set -CONFIG_MFD_MC13XXX=m -CONFIG_MFD_MC13XXX_SPI=m -CONFIG_MFD_MC13XXX_I2C=m -# CONFIG_MFD_HI6421_PMIC is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_HTC_I2CPLD is not set -# CONFIG_LPC_ICH is not set -CONFIG_LPC_SCH=m -CONFIG_MFD_IQS62X=m -# CONFIG_MFD_JANZ_CMODIO is not set -# CONFIG_MFD_KEMPLD is not set -# CONFIG_MFD_88PM800 is not set -# CONFIG_MFD_88PM805 is not set -# CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_MAX14577 is not set -# CONFIG_MFD_MAX77620 is not set -# CONFIG_MFD_MAX77650 is not set -CONFIG_MFD_MAX77686=y -# CONFIG_MFD_MAX77693 is not set -# CONFIG_MFD_MAX77843 is not set -# CONFIG_MFD_MAX8907 is not set -# CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set -# CONFIG_MFD_MAX8998 is not set -# CONFIG_MFD_MT6397 is not set -# CONFIG_MFD_MENF21BMC is not set -# CONFIG_EZX_PCAP is not set -# CONFIG_MFD_CPCAP is not set -CONFIG_MFD_VIPERBOARD=m -# CONFIG_MFD_RETU is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_UCB1400_CORE is not set -# CONFIG_MFD_PM8XXX is not set -# CONFIG_MFD_RDC321X is not set -# CONFIG_MFD_RT5033 is not set -# CONFIG_MFD_RC5T583 is not set -CONFIG_MFD_RK808=y -# CONFIG_MFD_RN5T618 is not set -CONFIG_MFD_SEC_CORE=y -# CONFIG_MFD_SI476X_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SKY81452 is not set -# CONFIG_MFD_SMSC is not set -# CONFIG_ABX500_CORE is not set -CONFIG_MFD_STMPE=y - -# -# STMicroelectronics STMPE Interface Drivers -# -CONFIG_STMPE_I2C=y -# CONFIG_STMPE_SPI is not set -# end of STMicroelectronics STMPE Interface Drivers - -CONFIG_MFD_SUN6I_PRCM=y -CONFIG_MFD_SYSCON=y -CONFIG_MFD_TI_AM335X_TSCADC=m -# CONFIG_MFD_LP3943 is not set -# CONFIG_MFD_LP8788 is not set -# CONFIG_MFD_TI_LMU is not set -CONFIG_MFD_OMAP_USB_HOST=y -CONFIG_MFD_PALMAS=y -# CONFIG_TPS6105X is not set -# CONFIG_TPS65010 is not set -# CONFIG_TPS6507X is not set -# CONFIG_MFD_TPS65086 is not set -# CONFIG_MFD_TPS65090 is not set -# CONFIG_MFD_TPS65217 is not set -# CONFIG_MFD_TI_LP873X is not set -# CONFIG_MFD_TI_LP87565 is not set -# CONFIG_MFD_TPS65218 is not set -# CONFIG_MFD_TPS6586X is not set -# CONFIG_MFD_TPS65910 is not set -# CONFIG_MFD_TPS65912_I2C is not set -# CONFIG_MFD_TPS65912_SPI is not set -# CONFIG_MFD_TPS80031 is not set -CONFIG_TWL4030_CORE=y -CONFIG_TWL4030_POWER=y -CONFIG_MFD_TWL4030_AUDIO=y -CONFIG_TWL6040_CORE=y -# CONFIG_MFD_WL1273_CORE is not set -# CONFIG_MFD_LM3533 is not set -# CONFIG_MFD_TC3589X is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -# CONFIG_MFD_TQMX86 is not set -# CONFIG_MFD_VX855 is not set -# CONFIG_MFD_LOCHNAGAR is not set -# CONFIG_MFD_ARIZONA_I2C is not set -# CONFIG_MFD_ARIZONA_SPI is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X_I2C is not set -# CONFIG_MFD_WM831X_SPI is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_WM8994 is not set -CONFIG_MFD_ROHM_BD718XX=m -CONFIG_MFD_ROHM_BD70528=m -CONFIG_MFD_ROHM_BD71828=m -# CONFIG_MFD_STPMIC1 is not set -# CONFIG_MFD_STMFX is not set -CONFIG_MFD_VEXPRESS_SYSREG=y -# end of Multifunction device drivers - -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_88PG86X is not set -CONFIG_REGULATOR_ACT8865=m -# CONFIG_REGULATOR_AD5398 is not set -CONFIG_REGULATOR_ANATOP=m -CONFIG_REGULATOR_ARIZONA_LDO1=m -CONFIG_REGULATOR_ARIZONA_MICSUPP=m -CONFIG_REGULATOR_AS3722=y -CONFIG_REGULATOR_AXP20X=m -CONFIG_REGULATOR_BD70528=m -CONFIG_REGULATOR_BD71828=m -CONFIG_REGULATOR_BD718XX=m -CONFIG_REGULATOR_BD9571MWV=m -CONFIG_REGULATOR_DA9052=m -# CONFIG_REGULATOR_DA9210 is not set -# CONFIG_REGULATOR_DA9211 is not set -CONFIG_REGULATOR_FAN53555=m -CONFIG_REGULATOR_GPIO=m -# CONFIG_REGULATOR_ISL9305 is not set -# CONFIG_REGULATOR_ISL6271A is not set -# CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_LP3972 is not set -# CONFIG_REGULATOR_LP872X is not set -# CONFIG_REGULATOR_LP8755 is not set -# CONFIG_REGULATOR_LTC3589 is not set -# CONFIG_REGULATOR_LTC3676 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_MAX8649 is not set -# CONFIG_REGULATOR_MAX8660 is not set -# CONFIG_REGULATOR_MAX8952 is not set -# CONFIG_REGULATOR_MAX8973 is not set -CONFIG_REGULATOR_MAX77686=m -# CONFIG_REGULATOR_MAX77802 is not set -CONFIG_REGULATOR_MC13XXX_CORE=m -CONFIG_REGULATOR_MC13783=m -CONFIG_REGULATOR_MC13892=m -# CONFIG_REGULATOR_MCP16502 is not set -CONFIG_REGULATOR_MP5416=m -CONFIG_REGULATOR_MP8859=m -CONFIG_REGULATOR_MP886X=m -CONFIG_REGULATOR_MPQ7920=m -# CONFIG_REGULATOR_MT6311 is not set -CONFIG_REGULATOR_PALMAS=y -CONFIG_REGULATOR_PBIAS=m -CONFIG_REGULATOR_PFUZE100=m -# CONFIG_REGULATOR_PV88060 is not set -# CONFIG_REGULATOR_PV88080 is not set -# CONFIG_REGULATOR_PV88090 is not set -# CONFIG_REGULATOR_PWM is not set -CONFIG_REGULATOR_RK808=m -CONFIG_REGULATOR_ROHM=m -CONFIG_REGULATOR_S2MPA01=m -CONFIG_REGULATOR_S2MPS11=m -CONFIG_REGULATOR_S5M8767=m -CONFIG_REGULATOR_SLG51000=m -CONFIG_REGULATOR_TI_ABB=m -CONFIG_REGULATOR_SY8106A=m -CONFIG_REGULATOR_SY8824X=m -# CONFIG_REGULATOR_TPS51632 is not set -# CONFIG_REGULATOR_TPS62360 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set -# CONFIG_REGULATOR_TPS65132 is not set -# CONFIG_REGULATOR_TPS6524X is not set -CONFIG_REGULATOR_TWL4030=y -# CONFIG_REGULATOR_VCTRL is not set -CONFIG_REGULATOR_VEXPRESS=m -CONFIG_CEC_CORE=m -CONFIG_CEC_NOTIFIER=y -CONFIG_RC_CORE=y -CONFIG_RC_MAP=m -CONFIG_LIRC=y -# CONFIG_BPF_LIRC_MODE2 is not set -CONFIG_RC_DECODERS=y -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m -CONFIG_IR_IMON_DECODER=m -CONFIG_IR_RCMM_DECODER=m -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -# CONFIG_IR_HIX5HD2 is not set -CONFIG_IR_IMON=m -CONFIG_IR_IMON_RAW=m -CONFIG_IR_MCEUSB=m -CONFIG_IR_REDRAT3=m -# CONFIG_IR_SPI is not set -CONFIG_IR_STREAMZAP=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -# CONFIG_IR_RX51 is not set -CONFIG_RC_LOOPBACK=m -CONFIG_IR_GPIO_CIR=m -CONFIG_IR_GPIO_TX=m -CONFIG_IR_PWM_TX=m -CONFIG_IR_SUNXI=m -# CONFIG_IR_SERIAL is not set -# CONFIG_IR_SIR is not set -CONFIG_RC_XBOX_DVD=m -CONFIG_MEDIA_SUPPORT=y - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -# CONFIG_MEDIA_CEC_RC is not set -CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_CONTROLLER_DVB=y -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_SUBDEV_API=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L2_I2C=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_V4L2_FWNODE=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_DVB_CORE=y -# CONFIG_DVB_MMAP is not set -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=8 -CONFIG_DVB_DYNAMIC_MINORS=y -# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set -# CONFIG_DVB_ULE_DEBUG is not set - -# -# Media drivers -# -CONFIG_MEDIA_USB_SUPPORT=y - -# -# Webcam devices -# -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -# CONFIG_VIDEO_TM6000 is not set - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_CXUSB_ANALOG=y -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -# CONFIG_DVB_USB_ZD1301 is not set -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m - -# -# Webcam, TV (analog/digital) USB devices -# -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# Software defined radio USB devices -# -CONFIG_USB_AIRSPY=m -CONFIG_USB_HACKRF=m -CONFIG_USB_MSI2500=m - -# -# USB HDMI CEC adapters -# -CONFIG_USB_PULSE8_CEC=m -CONFIG_USB_RAINSHADOW_CEC=m -CONFIG_MEDIA_PCI_SUPPORT=y - -# -# Media capture support -# -CONFIG_VIDEO_SOLO6X10=m -CONFIG_VIDEO_TW5864=m -CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_TW686X=m - -# -# Media capture/analog TV support -# -CONFIG_VIDEO_IVTV=m -# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set -CONFIG_VIDEO_IVTV_ALSA=m -CONFIG_VIDEO_FB_IVTV=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DT3155=m - -# -# Media capture/analog/hybrid TV support -# -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CX18_ALSA=m -CONFIG_VIDEO_CX23885=m -CONFIG_MEDIA_ALTERA_CI=m -# CONFIG_VIDEO_CX25821 is not set -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_ENABLE_VP3054=y -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_BT848=m -CONFIG_DVB_BT8XX=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_RC=y -CONFIG_VIDEO_SAA7134_DVB=m -# CONFIG_VIDEO_SAA7134_GO7007 is not set -CONFIG_VIDEO_SAA7164=m -CONFIG_VIDEO_COBALT=m - -# -# Media digital TV PCI Adapters -# -CONFIG_DVB_AV7110_IR=y -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set -CONFIG_DVB_PLUTO2=m -CONFIG_DVB_DM1105=m -CONFIG_DVB_PT1=m -CONFIG_DVB_PT3=m -CONFIG_MANTIS_CORE=m -CONFIG_DVB_MANTIS=m -CONFIG_DVB_HOPPER=m -CONFIG_DVB_NGENE=m -CONFIG_DVB_DDBRIDGE=m -# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set -CONFIG_DVB_SMIPCIE=m -CONFIG_DVB_NETUP_UNIDVB=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_VIDEO_CADENCE=y -CONFIG_VIDEO_CADENCE_CSI2RX=m -CONFIG_VIDEO_CADENCE_CSI2TX=m -CONFIG_VIDEO_ASPEED=m -# CONFIG_VIDEO_MUX is not set -CONFIG_VIDEO_OMAP3=m -# CONFIG_VIDEO_OMAP3_DEBUG is not set -# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set -# CONFIG_VIDEO_XILINX is not set -# CONFIG_VIDEO_SUN4I_CSI is not set -CONFIG_VIDEO_SUN6I_CSI=m -# CONFIG_VIDEO_TI_CAL is not set -CONFIG_V4L_MEM2MEM_DRIVERS=y -# CONFIG_VIDEO_CODA is not set -CONFIG_VIDEO_IMX_PXP=m -# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set -# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set -# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set -# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set -# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set -# CONFIG_VIDEO_SH_VEU is not set -CONFIG_VIDEO_ROCKCHIP_RGA=m -CONFIG_VIDEO_TI_VPE=m -# CONFIG_VIDEO_TI_VPE_DEBUG is not set -CONFIG_VIDEO_SUN8I_DEINTERLACE=m -CONFIG_VIDEO_SUN8I_ROTATE=m -CONFIG_VIDEO_TI_VPDMA=m -CONFIG_VIDEO_TI_SC=m -CONFIG_VIDEO_TI_CSC=m -CONFIG_V4L_TEST_DRIVERS=y -# CONFIG_VIDEO_VIMC is not set -CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_VIVID_CEC=y -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -# CONFIG_VIDEO_VIM2M is not set -# CONFIG_VIDEO_VICODEC is not set -# CONFIG_DVB_PLATFORM_DRIVERS is not set -# CONFIG_CEC_PLATFORM_DRIVERS is not set -# CONFIG_SDR_PLATFORM_DRIVERS is not set - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_TEA575X=m -CONFIG_RADIO_SI470X=y -CONFIG_USB_SI470X=m -# CONFIG_I2C_SI470X is not set -CONFIG_RADIO_SI4713=m -# CONFIG_USB_SI4713 is not set -# CONFIG_PLATFORM_SI4713 is not set -CONFIG_I2C_SI4713=m -CONFIG_USB_MR800=m -# CONFIG_USB_DSBR is not set -# CONFIG_RADIO_MAXIRADIO is not set -CONFIG_RADIO_SHARK=m -CONFIG_RADIO_SHARK2=m -CONFIG_USB_KEENE=m -CONFIG_USB_RAREMONO=m -CONFIG_USB_MA901=m -# CONFIG_RADIO_TEA5764 is not set -# CONFIG_RADIO_SAA7706H is not set -# CONFIG_RADIO_TEF6862 is not set -# CONFIG_RADIO_WL1273 is not set - -# -# Texas Instruments WL128x FM driver (ST based) -# -CONFIG_RADIO_WL128X=m -# end of Texas Instruments WL128x FM driver (ST based) - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_V4L2=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -# CONFIG_SMS_SIANO_DEBUGFS is not set -CONFIG_VIDEO_V4L2_TPG=m - -# -# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=y - -# -# I2C Encoders, decoders, sensors and other helper chips -# - -# -# Audio decoders, processors and mixers -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TDA1997X=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS3308=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_TLV320AIC23B=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m -CONFIG_VIDEO_SONY_BTF_MPX=m - -# -# RDS decoders -# -CONFIG_VIDEO_SAA6588=m - -# -# Video decoders -# -CONFIG_VIDEO_ADV7180=m -CONFIG_VIDEO_ADV7183=m -CONFIG_VIDEO_ADV748X=m -CONFIG_VIDEO_ADV7604=m -CONFIG_VIDEO_ADV7604_CEC=y -CONFIG_VIDEO_ADV7842=m -CONFIG_VIDEO_ADV7842_CEC=y -CONFIG_VIDEO_BT819=m -CONFIG_VIDEO_BT856=m -CONFIG_VIDEO_BT866=m -CONFIG_VIDEO_KS0127=m -CONFIG_VIDEO_ML86V7667=m -CONFIG_VIDEO_SAA7110=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TC358743=m -CONFIG_VIDEO_TC358743_CEC=y -CONFIG_VIDEO_TVP514X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TVP7002=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m -CONFIG_VIDEO_TW9910=m -CONFIG_VIDEO_VPX3220=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_CX25840=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m -CONFIG_VIDEO_SAA7185=m -CONFIG_VIDEO_ADV7170=m -CONFIG_VIDEO_ADV7175=m -CONFIG_VIDEO_ADV7343=m -CONFIG_VIDEO_ADV7393=m -CONFIG_VIDEO_ADV7511=m -CONFIG_VIDEO_ADV7511_CEC=y -CONFIG_VIDEO_AD9389B=m -CONFIG_VIDEO_AK881X=m -CONFIG_VIDEO_THS8200=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_APTINA_PLL=m -CONFIG_VIDEO_SMIAPP_PLL=m -CONFIG_VIDEO_HI556=m -CONFIG_VIDEO_IMX214=m -CONFIG_VIDEO_IMX219=m -CONFIG_VIDEO_IMX258=m -CONFIG_VIDEO_IMX274=m -CONFIG_VIDEO_IMX290=m -CONFIG_VIDEO_IMX319=m -CONFIG_VIDEO_IMX355=m -CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV2659=m -CONFIG_VIDEO_OV2680=m -CONFIG_VIDEO_OV2685=m -CONFIG_VIDEO_OV5640=m -CONFIG_VIDEO_OV5645=m -CONFIG_VIDEO_OV5647=m -CONFIG_VIDEO_OV6650=m -CONFIG_VIDEO_OV5670=m -CONFIG_VIDEO_OV5675=m -CONFIG_VIDEO_OV5695=m -CONFIG_VIDEO_OV7251=m -CONFIG_VIDEO_OV772X=m -CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_OV7740=m -CONFIG_VIDEO_OV8856=m -CONFIG_VIDEO_OV9640=m -CONFIG_VIDEO_OV9650=m -CONFIG_VIDEO_OV13858=m -CONFIG_VIDEO_VS6624=m -CONFIG_VIDEO_MT9M001=m -CONFIG_VIDEO_MT9M032=m -CONFIG_VIDEO_MT9M111=m -CONFIG_VIDEO_MT9P031=m -CONFIG_VIDEO_MT9T001=m -CONFIG_VIDEO_MT9T112=m -CONFIG_VIDEO_MT9V011=m -CONFIG_VIDEO_MT9V032=m -CONFIG_VIDEO_MT9V111=m -CONFIG_VIDEO_SR030PC30=m -CONFIG_VIDEO_NOON010PC30=m -CONFIG_VIDEO_M5MOLS=m -CONFIG_VIDEO_RJ54N1=m -CONFIG_VIDEO_S5K6AA=m -CONFIG_VIDEO_S5K6A3=m -CONFIG_VIDEO_S5K4ECGX=m -CONFIG_VIDEO_S5K5BAF=m -CONFIG_VIDEO_SMIAPP=m -CONFIG_VIDEO_ET8EK8=m -CONFIG_VIDEO_S5C73M3=m - -# -# Lens drivers -# -CONFIG_VIDEO_AD5820=m -CONFIG_VIDEO_AK7375=m -CONFIG_VIDEO_DW9714=m -CONFIG_VIDEO_DW9807_VCM=m - -# -# Flash devices -# -CONFIG_VIDEO_ADP1653=m -CONFIG_VIDEO_LM3560=m -CONFIG_VIDEO_LM3646=m - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m - -# -# Audio/Video compression chips -# -CONFIG_VIDEO_SAA6752HS=m - -# -# SDR tuner chips -# -CONFIG_SDR_MAX2175=m - -# -# Miscellaneous helper chips -# -CONFIG_VIDEO_THS7303=m -CONFIG_VIDEO_M52790=m -CONFIG_VIDEO_I2C=m -CONFIG_VIDEO_ST_MIPID02=m -# end of I2C Encoders, decoders, sensors and other helper chips - -# -# SPI helper chips -# -CONFIG_VIDEO_GS1662=m -# end of SPI helper chips - -# -# Media SPI Adapters -# -# CONFIG_CXD2880_SPI_DRV is not set -# end of Media SPI Adapters - -CONFIG_MEDIA_TUNER=y - -# -# Customize TV tuners -# -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA18250=m -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA827X=y -CONFIG_MEDIA_TUNER_TDA18271=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_XC4000=y -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_M88RS6000T=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_MXL301RF=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m -CONFIG_MEDIA_TUNER_QM1D1B0004=m -# end of Customize TV tuners - -# -# Customise DVB Frontends -# - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV0910=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_STV6111=m -CONFIG_DVB_MXL5XX=m -CONFIG_DVB_M88DS3103=m - -# -# Multistandard (cable + terrestrial) frontends -# -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10036=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24117=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_MB86A16=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_S5H1432=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_DIB9000=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_STV0367=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_CXD2841ER=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_RTL2832_SDR=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_ZD1301_DEMOD=m -CONFIG_DVB_GP8PSK_FE=m -CONFIG_DVB_CXD2880=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m -CONFIG_DVB_MN88443X=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBH25=m -CONFIG_DVB_LNBH29=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_LGS8GL5=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_TDA665x=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m -CONFIG_DVB_HORUS3A=m -CONFIG_DVB_ASCOT2E=m -CONFIG_DVB_HELENE=m - -# -# Common Interface (EN50221) controller drivers -# -CONFIG_DVB_CXD2099=m -CONFIG_DVB_SP2=m - -# -# Tools to develop new frontends -# -CONFIG_DVB_DUMMY_FE=m -# end of Customise DVB Frontends - -# -# Graphics support -# -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -# CONFIG_TEGRA_HOST1X is not set -CONFIG_IMX_IPUV3_CORE=m -CONFIG_DRM=m -CONFIG_DRM_MIPI_DBI=m -CONFIG_DRM_MIPI_DSI=y -# CONFIG_DRM_DP_AUX_CHARDEV is not set -# CONFIG_DRM_DEBUG_SELFTEST is not set -CONFIG_DRM_KMS_HELPER=m -CONFIG_DRM_KMS_FB_HELPER=y -# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set -CONFIG_DRM_LOAD_EDID_FIRMWARE=y -# CONFIG_DRM_DP_CEC is not set -CONFIG_DRM_TTM=m -CONFIG_DRM_TTM_DMA_PAGE_POOL=y -CONFIG_DRM_VRAM_HELPER=m -CONFIG_DRM_TTM_HELPER=m -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y -CONFIG_DRM_GEM_SHMEM_HELPER=y -CONFIG_DRM_VM=y -CONFIG_DRM_SCHED=m - -# -# I2C encoder or helper chips -# -# CONFIG_DRM_I2C_CH7006 is not set -# CONFIG_DRM_I2C_SIL164 is not set -CONFIG_DRM_I2C_NXP_TDA998X=m -CONFIG_DRM_I2C_NXP_TDA9950=m -# end of I2C encoder or helper chips - -# -# ARM devices -# -# CONFIG_DRM_HDLCD is not set -# CONFIG_DRM_MALI_DISPLAY is not set -# CONFIG_DRM_KOMEDA is not set -# end of ARM devices - -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_AMDGPU is not set -# CONFIG_DRM_NOUVEAU is not set -CONFIG_DRM_VGEM=m -# CONFIG_DRM_VKMS is not set -CONFIG_DRM_EXYNOS=m - -# -# CRTCs -# -CONFIG_DRM_EXYNOS_FIMD=y -# CONFIG_DRM_EXYNOS5433_DECON is not set -# CONFIG_DRM_EXYNOS7_DECON is not set -CONFIG_DRM_EXYNOS_MIXER=y -# CONFIG_DRM_EXYNOS_VIDI is not set - -# -# Encoders and Bridges -# -# CONFIG_DRM_EXYNOS_DPI is not set -CONFIG_DRM_EXYNOS_DSI=y -CONFIG_DRM_EXYNOS_DP=y -CONFIG_DRM_EXYNOS_HDMI=y - -# -# Sub-drivers -# -# CONFIG_DRM_EXYNOS_G2D is not set -# CONFIG_DRM_EXYNOS_FIMC is not set -# CONFIG_DRM_EXYNOS_ROTATOR is not set -# CONFIG_DRM_EXYNOS_SCALER is not set -# CONFIG_DRM_EXYNOS_GSC is not set -CONFIG_DRM_ROCKCHIP=m -CONFIG_ROCKCHIP_ANALOGIX_DP=y -# CONFIG_ROCKCHIP_CDN_DP is not set -CONFIG_ROCKCHIP_DW_HDMI=y -CONFIG_ROCKCHIP_DW_MIPI_DSI=y -# CONFIG_ROCKCHIP_INNO_HDMI is not set -# CONFIG_ROCKCHIP_LVDS is not set -# CONFIG_ROCKCHIP_RGB is not set -CONFIG_ROCKCHIP_RK3066_HDMI=y -CONFIG_DRM_UDL=m -# CONFIG_DRM_AST is not set -# CONFIG_DRM_MGAG200 is not set -CONFIG_DRM_CIRRUS_QEMU=m -# CONFIG_DRM_ARMADA is not set -# CONFIG_DRM_RCAR_DW_HDMI is not set -# CONFIG_DRM_RCAR_LVDS is not set -# CONFIG_DRM_SUN4I is not set -CONFIG_DRM_OMAP=m -CONFIG_OMAP2_DSS_INIT=y -CONFIG_OMAP_DSS_BASE=m -CONFIG_OMAP2_DSS=m -# CONFIG_OMAP2_DSS_DEBUG is not set -# CONFIG_OMAP2_DSS_DEBUGFS is not set -CONFIG_OMAP2_DSS_DPI=y -CONFIG_OMAP2_DSS_VENC=y -CONFIG_OMAP2_DSS_HDMI_COMMON=y -CONFIG_OMAP4_DSS_HDMI=y -CONFIG_OMAP4_DSS_HDMI_CEC=y -CONFIG_OMAP5_DSS_HDMI=y -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y -CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 -CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y - -# -# OMAPDRM External Display Device Drivers -# -# CONFIG_DRM_OMAP_PANEL_DSI_CM is not set -# end of OMAPDRM External Display Device Drivers - -CONFIG_DRM_TILCDC=m -CONFIG_DRM_QXL=m -CONFIG_DRM_BOCHS=m -CONFIG_DRM_VIRTIO_GPU=m -CONFIG_DRM_MSM=m -CONFIG_DRM_MSM_GPU_STATE=y -# CONFIG_DRM_MSM_REGISTER_LOGGING is not set -# CONFIG_DRM_MSM_GPU_SUDO is not set -CONFIG_DRM_MSM_DSI=y -CONFIG_DRM_MSM_DSI_PLL=y -CONFIG_DRM_MSM_DSI_28NM_PHY=y -CONFIG_DRM_MSM_DSI_20NM_PHY=y -CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y -CONFIG_DRM_MSM_DSI_14NM_PHY=y -CONFIG_DRM_MSM_DSI_10NM_PHY=y -# CONFIG_DRM_FSL_DCU is not set -# CONFIG_DRM_TEGRA is not set -# CONFIG_DRM_STM is not set -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -CONFIG_DRM_PANEL_ARM_VERSATILE=m -CONFIG_DRM_PANEL_BOE_HIMAX8279D=m -CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m -# CONFIG_DRM_PANEL_LVDS is not set -CONFIG_DRM_PANEL_SIMPLE=m -CONFIG_DRM_PANEL_ELIDA_KD35T133=m -CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=m -# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set -CONFIG_DRM_PANEL_ILITEK_IL9322=m -CONFIG_DRM_PANEL_ILITEK_ILI9881C=m -# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set -# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set -# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set -CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=m -# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set -# CONFIG_DRM_PANEL_LG_LB035Q02 is not set -# CONFIG_DRM_PANEL_LG_LG4573 is not set -# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set -CONFIG_DRM_PANEL_NOVATEK_NT35510=m -# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set -# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set -# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set -CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m -# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set -CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m -# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set -# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set -# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set -# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set -CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=m -# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set -# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set -# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set -# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set -# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set -CONFIG_DRM_PANEL_SONY_ACX424AKP=m -# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set -# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set -# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set -# CONFIG_DRM_PANEL_TPO_TPG110 is not set -# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set -CONFIG_DRM_PANEL_XINPENG_XPP055C272=m -# end of Display Panels - -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_PANEL_BRIDGE=y - -# -# Display Interface Bridges -# -CONFIG_DRM_CDNS_DSI=m -CONFIG_DRM_DISPLAY_CONNECTOR=m -CONFIG_DRM_LVDS_CODEC=m -# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set -# CONFIG_DRM_NXP_PTN3460 is not set -# CONFIG_DRM_PARADE_PS8622 is not set -CONFIG_DRM_PARADE_PS8640=m -# CONFIG_DRM_SIL_SII8620 is not set -# CONFIG_DRM_SII902X is not set -# CONFIG_DRM_SII9234 is not set -CONFIG_DRM_SIMPLE_BRIDGE=m -# CONFIG_DRM_THINE_THC63LVD1024 is not set -# CONFIG_DRM_TOSHIBA_TC358764 is not set -# CONFIG_DRM_TOSHIBA_TC358767 is not set -CONFIG_DRM_TOSHIBA_TC358768=m -# CONFIG_DRM_TI_TFP410 is not set -# CONFIG_DRM_TI_SN65DSI86 is not set -CONFIG_DRM_TI_TPD12S015=m -CONFIG_DRM_ANALOGIX_ANX6345=m -# CONFIG_DRM_ANALOGIX_ANX78XX is not set -CONFIG_DRM_ANALOGIX_DP=m -# CONFIG_DRM_I2C_ADV7511 is not set -CONFIG_DRM_DW_HDMI=m -# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set -# CONFIG_DRM_DW_HDMI_I2S_AUDIO is not set -CONFIG_DRM_DW_HDMI_CEC=m -CONFIG_DRM_DW_MIPI_DSI=m -# end of Display Interface Bridges - -# CONFIG_DRM_STI is not set -CONFIG_DRM_IMX=m -# CONFIG_DRM_IMX_PARALLEL_DISPLAY is not set -# CONFIG_DRM_IMX_TVE is not set -CONFIG_DRM_IMX_LDB=m -CONFIG_DRM_IMX_HDMI=m -CONFIG_DRM_V3D=m -CONFIG_DRM_VC4=m -# CONFIG_DRM_VC4_HDMI_CEC is not set -CONFIG_DRM_ETNAVIV=m -CONFIG_DRM_ETNAVIV_THERMAL=y -# CONFIG_DRM_ARCPGU is not set -# CONFIG_DRM_MXSFB is not set -CONFIG_DRM_GM12U320=m -# CONFIG_TINYDRM_HX8357D is not set -# CONFIG_TINYDRM_ILI9225 is not set -# CONFIG_TINYDRM_ILI9341 is not set -CONFIG_TINYDRM_ILI9486=m -# CONFIG_TINYDRM_MI0283QT is not set -# CONFIG_TINYDRM_REPAPER is not set -# CONFIG_TINYDRM_ST7586 is not set -# CONFIG_TINYDRM_ST7735R is not set -# CONFIG_DRM_PL111 is not set -# CONFIG_DRM_TVE200 is not set -# CONFIG_DRM_XEN is not set -CONFIG_DRM_LIMA=m -CONFIG_DRM_PANFROST=m -CONFIG_DRM_MCDE=m -CONFIG_DRM_TIDSS=m -CONFIG_DRM_LEGACY=y -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_MGA is not set -CONFIG_DRM_VIA=m -CONFIG_DRM_SAVAGE=m -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y - -# -# Frame buffer Devices -# -CONFIG_FB_CMDLINE=y -CONFIG_FB_NOTIFY=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_DDC=m -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_IMAGEBLIT=y -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=y -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_SVGALIB=m -CONFIG_FB_BACKLIGHT=m -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -CONFIG_FB_ARMCLCD=y -# CONFIG_FB_IMX is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_UVESA is not set -CONFIG_FB_EFI=y -# CONFIG_FB_OPENCORES is not set -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_NVIDIA=m -# CONFIG_FB_NVIDIA_I2C is not set -# CONFIG_FB_NVIDIA_DEBUG is not set -CONFIG_FB_NVIDIA_BACKLIGHT=y -CONFIG_FB_RIVA=m -# CONFIG_FB_RIVA_I2C is not set -# CONFIG_FB_RIVA_DEBUG is not set -CONFIG_FB_RIVA_BACKLIGHT=y -# CONFIG_FB_I740 is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -CONFIG_FB_S3=m -CONFIG_FB_S3_DDC=y -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=m -# CONFIG_FB_3DFX_ACCEL is not set -CONFIG_FB_3DFX_I2C=y -# CONFIG_FB_VOODOO1 is not set -CONFIG_FB_VT8623=m -# CONFIG_FB_TRIDENT is not set -CONFIG_FB_ARK=m -CONFIG_FB_PM3=m -# CONFIG_FB_CARMINE is not set -CONFIG_FB_VT8500=y -CONFIG_FB_WM8505=y -# CONFIG_FB_WMT_GE_ROPS is not set -CONFIG_FB_SMSCUFX=m -CONFIG_FB_UDL=m -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_FB_DA8XX is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_XEN_FBDEV_FRONTEND=y -# CONFIG_FB_METRONOME is not set -CONFIG_FB_MB862XX=m -CONFIG_FB_MB862XX_PCI_GDC=y -CONFIG_FB_MB862XX_I2C=y -CONFIG_FB_MX3=y -CONFIG_FB_SIMPLE=y -# CONFIG_FB_SSD1307 is not set -# CONFIG_FB_SM712 is not set -# end of Frame buffer Devices - -# -# Backlight & LCD device support -# -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_BACKLIGHT_PWM=m -# CONFIG_BACKLIGHT_DA9052 is not set -CONFIG_BACKLIGHT_QCOM_WLED=m -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -# CONFIG_BACKLIGHT_LM3630A is not set -# CONFIG_BACKLIGHT_LM3639 is not set -# CONFIG_BACKLIGHT_LP855X is not set -CONFIG_BACKLIGHT_PANDORA=m -CONFIG_BACKLIGHT_GPIO=m -# CONFIG_BACKLIGHT_LV5207LP is not set -# CONFIG_BACKLIGHT_BD6107 is not set -# CONFIG_BACKLIGHT_ARCXCNN is not set -CONFIG_BACKLIGHT_LED=m -# end of Backlight & LCD device support - -CONFIG_VGASTATE=m -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set -# end of Console display driver support - -# CONFIG_LOGO is not set -# end of Graphics support - -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_SEQ_DEVICE=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_SEQUENCER_OSS is not set -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -CONFIG_SND_SEQ_MIDI_EVENT=m -CONFIG_SND_SEQ_MIDI=m -CONFIG_SND_SEQ_MIDI_EMUL=m -CONFIG_SND_SEQ_VIRMIDI=m -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_OPL3_LIB_SEQ=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -CONFIG_SND_ALOOP=m -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -CONFIG_SND_MTS64=m -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -CONFIG_SND_ALS300=m -CONFIG_SND_ALI5451=m -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -CONFIG_SND_AZT3328=m -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -CONFIG_SND_CTXFI=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_INDIGOIOX=m -CONFIG_SND_INDIGODJX=m -CONFIG_SND_EMU10K1=m -CONFIG_SND_EMU10K1_SEQ=m -CONFIG_SND_EMU10K1X=m -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -CONFIG_SND_ES1938=m -CONFIG_SND_ES1968=m -CONFIG_SND_ES1968_INPUT=y -CONFIG_SND_ES1968_RADIO=y -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDSP is not set -CONFIG_SND_HDSPM=m -CONFIG_SND_ICE1712=m -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -CONFIG_SND_LOLA=m -CONFIG_SND_MAESTRO3=m -CONFIG_SND_MAESTRO3_INPUT=y -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -CONFIG_SND_SONICVIBES=m -CONFIG_SND_TRIDENT=m -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -CONFIG_SND_VIRTUOSO=m -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set - -# -# HD-Audio -# -CONFIG_SND_HDA=m -# CONFIG_SND_HDA_INTEL is not set -CONFIG_SND_HDA_TEGRA=m -CONFIG_SND_HDA_HWDEP=y -CONFIG_SND_HDA_RECONFIG=y -CONFIG_SND_HDA_INPUT_BEEP=y -CONFIG_SND_HDA_INPUT_BEEP_MODE=1 -CONFIG_SND_HDA_PATCH_LOADER=y -CONFIG_SND_HDA_CODEC_REALTEK=m -CONFIG_SND_HDA_CODEC_ANALOG=m -CONFIG_SND_HDA_CODEC_SIGMATEL=m -CONFIG_SND_HDA_CODEC_VIA=m -CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_HDA_CODEC_CIRRUS=m -CONFIG_SND_HDA_CODEC_CONEXANT=m -CONFIG_SND_HDA_CODEC_CA0110=m -CONFIG_SND_HDA_CODEC_CA0132=m -CONFIG_SND_HDA_CODEC_CA0132_DSP=y -CONFIG_SND_HDA_CODEC_CMEDIA=m -CONFIG_SND_HDA_CODEC_SI3054=m -CONFIG_SND_HDA_GENERIC=m -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -# end of HD-Audio - -CONFIG_SND_HDA_CORE=m -CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_ALIGNED_MMIO=y -CONFIG_SND_HDA_PREALLOC_SIZE=2048 -CONFIG_SND_ARM=y -# CONFIG_SND_ARMAACI is not set -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_FIREWIRE=y -CONFIG_SND_FIREWIRE_LIB=m -CONFIG_SND_DICE=m -CONFIG_SND_OXFW=m -CONFIG_SND_ISIGHT=m -CONFIG_SND_FIREWORKS=m -CONFIG_SND_BEBOB=m -CONFIG_SND_FIREWIRE_DIGI00X=m -CONFIG_SND_FIREWIRE_TASCAM=m -# CONFIG_SND_FIREWIRE_MOTU is not set -# CONFIG_SND_FIREFACE is not set -CONFIG_SND_SOC=m -CONFIG_SND_SOC_AC97_BUS=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -# CONFIG_SND_SOC_AMD_ACP is not set -# CONFIG_SND_ATMEL_SOC is not set -CONFIG_SND_BCM2835_SOC_I2S=m -CONFIG_SND_BCM63XX_I2S_WHISTLER=m -# CONFIG_SND_DESIGNWARE_I2S is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -CONFIG_SND_SOC_FSL_ASRC=m -CONFIG_SND_SOC_FSL_SAI=m -CONFIG_SND_SOC_FSL_MQS=m -CONFIG_SND_SOC_FSL_AUDMIX=m -CONFIG_SND_SOC_FSL_SSI=m -CONFIG_SND_SOC_FSL_SPDIF=m -# CONFIG_SND_SOC_FSL_ESAI is not set -CONFIG_SND_SOC_FSL_MICFIL=m -CONFIG_SND_SOC_FSL_UTILS=m -CONFIG_SND_SOC_IMX_PCM_DMA=m -CONFIG_SND_SOC_IMX_AUDMUX=m -CONFIG_SND_IMX_SOC=m -CONFIG_SND_SOC_IMX_PCM_FIQ=m -CONFIG_SND_SOC_IMX_SSI=m - -# -# SoC Audio support for Freescale i.MX boards: -# -CONFIG_SND_SOC_EUKREA_TLV320=m -CONFIG_SND_SOC_IMX_ES8328=m -CONFIG_SND_SOC_IMX_SGTL5000=m -CONFIG_SND_SOC_IMX_SPDIF=m -CONFIG_SND_SOC_IMX_MC13783=m -# CONFIG_SND_SOC_FSL_ASOC_CARD is not set -CONFIG_SND_SOC_IMX_AUDMIX=m -# end of SoC Audio for Freescale CPUs - -# CONFIG_SND_I2S_HI6210_I2S is not set -# CONFIG_SND_KIRKWOOD_SOC is not set -# CONFIG_SND_SOC_IMG is not set -# CONFIG_SND_SOC_MTK_BTCVSD is not set -CONFIG_SND_SOC_ROCKCHIP=m -CONFIG_SND_SOC_ROCKCHIP_I2S=m -# CONFIG_SND_SOC_ROCKCHIP_PDM is not set -CONFIG_SND_SOC_ROCKCHIP_SPDIF=m -CONFIG_SND_SOC_ROCKCHIP_MAX98090=m -CONFIG_SND_SOC_ROCKCHIP_RT5645=m -# CONFIG_SND_SOC_RK3288_HDMI_ANALOG is not set -# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set -# CONFIG_SND_SOC_SAMSUNG is not set -# CONFIG_SND_SOC_SOF_TOPLEVEL is not set - -# -# STMicroelectronics STM32 SOC audio support -# -# end of STMicroelectronics STM32 SOC audio support - -# -# Allwinner SoC Audio support -# -CONFIG_SND_SUN4I_CODEC=m -# CONFIG_SND_SUN8I_CODEC is not set -# CONFIG_SND_SUN8I_CODEC_ANALOG is not set -# CONFIG_SND_SUN4I_I2S is not set -CONFIG_SND_SUN4I_SPDIF=m -# end of Allwinner SoC Audio support - -CONFIG_SND_SOC_TEGRA=m -CONFIG_SND_SOC_TEGRA20_AC97=m -CONFIG_SND_SOC_TEGRA20_DAS=m -CONFIG_SND_SOC_TEGRA20_I2S=m -CONFIG_SND_SOC_TEGRA20_SPDIF=m -CONFIG_SND_SOC_TEGRA30_AHUB=m -CONFIG_SND_SOC_TEGRA30_I2S=m -CONFIG_SND_SOC_TEGRA_RT5640=m -CONFIG_SND_SOC_TEGRA_WM8753=m -CONFIG_SND_SOC_TEGRA_WM8903=m -CONFIG_SND_SOC_TEGRA_WM9712=m -CONFIG_SND_SOC_TEGRA_TRIMSLICE=m -CONFIG_SND_SOC_TEGRA_ALC5632=m -CONFIG_SND_SOC_TEGRA_MAX98090=m -CONFIG_SND_SOC_TEGRA_RT5677=m -# CONFIG_SND_SOC_TEGRA_SGTL5000 is not set - -# -# Audio support for Texas Instruments SoCs -# -CONFIG_SND_SOC_TI_EDMA_PCM=m -CONFIG_SND_SOC_TI_SDMA_PCM=m -CONFIG_SND_SOC_TI_UDMA_PCM=m - -# -# Texas Instruments DAI support for: -# -CONFIG_SND_SOC_DAVINCI_MCASP=m -CONFIG_SND_SOC_OMAP_DMIC=m -CONFIG_SND_SOC_OMAP_MCBSP=m -CONFIG_SND_SOC_OMAP_MCPDM=m - -# -# Audio support for boards with Texas Instruments SoCs -# -CONFIG_SND_SOC_NOKIA_RX51=m -CONFIG_SND_SOC_OMAP3_PANDORA=m -CONFIG_SND_SOC_OMAP3_TWL4030=m -CONFIG_SND_SOC_OMAP_ABE_TWL6040=m -CONFIG_SND_SOC_OMAP_HDMI=m -# end of Audio support for Texas Instruments SoCs - -# CONFIG_SND_SOC_XILINX_I2S is not set -# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set -# CONFIG_SND_SOC_XILINX_SPDIF is not set -# CONFIG_SND_SOC_XTFPGA_I2S is not set -# CONFIG_ZX_TDM is not set -CONFIG_SND_SOC_I2C_AND_SPI=m - -# -# CODEC drivers -# -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_ADAU1701 is not set -# CONFIG_SND_SOC_ADAU1761_I2C is not set -# CONFIG_SND_SOC_ADAU1761_SPI is not set -# CONFIG_SND_SOC_ADAU7002 is not set -CONFIG_SND_SOC_ADAU7118=m -CONFIG_SND_SOC_ADAU7118_HW=m -CONFIG_SND_SOC_ADAU7118_I2C=m -# CONFIG_SND_SOC_AK4104 is not set -# CONFIG_SND_SOC_AK4118 is not set -# CONFIG_SND_SOC_AK4458 is not set -# CONFIG_SND_SOC_AK4554 is not set -# CONFIG_SND_SOC_AK4613 is not set -# CONFIG_SND_SOC_AK4642 is not set -# CONFIG_SND_SOC_AK5386 is not set -# CONFIG_SND_SOC_AK5558 is not set -# CONFIG_SND_SOC_ALC5623 is not set -CONFIG_SND_SOC_ALC5632=m -# CONFIG_SND_SOC_BD28623 is not set -# CONFIG_SND_SOC_BT_SCO is not set -CONFIG_SND_SOC_CROS_EC_CODEC=m -# CONFIG_SND_SOC_CS35L32 is not set -# CONFIG_SND_SOC_CS35L33 is not set -# CONFIG_SND_SOC_CS35L34 is not set -# CONFIG_SND_SOC_CS35L35 is not set -# CONFIG_SND_SOC_CS35L36 is not set -# CONFIG_SND_SOC_CS42L42 is not set -# CONFIG_SND_SOC_CS42L51_I2C is not set -# CONFIG_SND_SOC_CS42L52 is not set -# CONFIG_SND_SOC_CS42L56 is not set -# CONFIG_SND_SOC_CS42L73 is not set -# CONFIG_SND_SOC_CS4265 is not set -# CONFIG_SND_SOC_CS4270 is not set -# CONFIG_SND_SOC_CS4271_I2C is not set -# CONFIG_SND_SOC_CS4271_SPI is not set -# CONFIG_SND_SOC_CS42XX8_I2C is not set -# CONFIG_SND_SOC_CS43130 is not set -# CONFIG_SND_SOC_CS4341 is not set -# CONFIG_SND_SOC_CS4349 is not set -# CONFIG_SND_SOC_CS53L30 is not set -# CONFIG_SND_SOC_CX2072X is not set -CONFIG_SND_SOC_DA7213=m -CONFIG_SND_SOC_DMIC=m -CONFIG_SND_SOC_HDMI_CODEC=m -# CONFIG_SND_SOC_ES7134 is not set -# CONFIG_SND_SOC_ES7241 is not set -# CONFIG_SND_SOC_ES8316 is not set -CONFIG_SND_SOC_ES8328=m -CONFIG_SND_SOC_ES8328_I2C=m -CONFIG_SND_SOC_ES8328_SPI=m -# CONFIG_SND_SOC_GTM601 is not set -# CONFIG_SND_SOC_INNO_RK3036 is not set -# CONFIG_SND_SOC_MAX98088 is not set -CONFIG_SND_SOC_MAX98090=m -# CONFIG_SND_SOC_MAX98357A is not set -# CONFIG_SND_SOC_MAX98504 is not set -# CONFIG_SND_SOC_MAX9867 is not set -# CONFIG_SND_SOC_MAX98927 is not set -# CONFIG_SND_SOC_MAX98373 is not set -# CONFIG_SND_SOC_MAX9860 is not set -# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set -# CONFIG_SND_SOC_PCM1681 is not set -# CONFIG_SND_SOC_PCM1789_I2C is not set -# CONFIG_SND_SOC_PCM179X_I2C is not set -# CONFIG_SND_SOC_PCM179X_SPI is not set -# CONFIG_SND_SOC_PCM186X_I2C is not set -# CONFIG_SND_SOC_PCM186X_SPI is not set -# CONFIG_SND_SOC_PCM3060_I2C is not set -# CONFIG_SND_SOC_PCM3060_SPI is not set -# CONFIG_SND_SOC_PCM3168A_I2C is not set -# CONFIG_SND_SOC_PCM3168A_SPI is not set -# CONFIG_SND_SOC_PCM512x_I2C is not set -# CONFIG_SND_SOC_PCM512x_SPI is not set -CONFIG_SND_SOC_RK3328=m -CONFIG_SND_SOC_RL6231=m -# CONFIG_SND_SOC_RT5616 is not set -# CONFIG_SND_SOC_RT5631 is not set -CONFIG_SND_SOC_RT5640=m -CONFIG_SND_SOC_RT5645=m -CONFIG_SND_SOC_RT5677=m -CONFIG_SND_SOC_RT5677_SPI=m -CONFIG_SND_SOC_SGTL5000=m -# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set -# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set -# CONFIG_SND_SOC_SPDIF is not set -# CONFIG_SND_SOC_SSM2305 is not set -# CONFIG_SND_SOC_SSM2602_SPI is not set -# CONFIG_SND_SOC_SSM2602_I2C is not set -# CONFIG_SND_SOC_SSM4567 is not set -# CONFIG_SND_SOC_STA32X is not set -# CONFIG_SND_SOC_STA350 is not set -# CONFIG_SND_SOC_STI_SAS is not set -# CONFIG_SND_SOC_TAS2552 is not set -# CONFIG_SND_SOC_TAS2562 is not set -# CONFIG_SND_SOC_TAS2770 is not set -# CONFIG_SND_SOC_TAS5086 is not set -# CONFIG_SND_SOC_TAS571X is not set -# CONFIG_SND_SOC_TAS5720 is not set -# CONFIG_SND_SOC_TAS6424 is not set -# CONFIG_SND_SOC_TDA7419 is not set -# CONFIG_SND_SOC_TFA9879 is not set -CONFIG_SND_SOC_TLV320AIC23=m -CONFIG_SND_SOC_TLV320AIC23_I2C=m -# CONFIG_SND_SOC_TLV320AIC23_SPI is not set -# CONFIG_SND_SOC_TLV320AIC31XX is not set -# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set -# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set -CONFIG_SND_SOC_TLV320AIC3X=m -# CONFIG_SND_SOC_TLV320ADCX140 is not set -CONFIG_SND_SOC_TS3A227E=m -# CONFIG_SND_SOC_TSCS42XX is not set -# CONFIG_SND_SOC_TSCS454 is not set -CONFIG_SND_SOC_TWL4030=m -CONFIG_SND_SOC_TWL6040=m -# CONFIG_SND_SOC_UDA1334 is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8523 is not set -# CONFIG_SND_SOC_WM8524 is not set -# CONFIG_SND_SOC_WM8580 is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8728 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8737 is not set -# CONFIG_SND_SOC_WM8741 is not set -# CONFIG_SND_SOC_WM8750 is not set -CONFIG_SND_SOC_WM8753=m -# CONFIG_SND_SOC_WM8770 is not set -# CONFIG_SND_SOC_WM8776 is not set -# CONFIG_SND_SOC_WM8782 is not set -# CONFIG_SND_SOC_WM8804_I2C is not set -# CONFIG_SND_SOC_WM8804_SPI is not set -CONFIG_SND_SOC_WM8903=m -CONFIG_SND_SOC_WM8904=m -# CONFIG_SND_SOC_WM8960 is not set -# CONFIG_SND_SOC_WM8962 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM8978 is not set -# CONFIG_SND_SOC_WM8985 is not set -CONFIG_SND_SOC_WM9712=m -# CONFIG_SND_SOC_ZX_AUD96P22 is not set -# CONFIG_SND_SOC_MAX9759 is not set -CONFIG_SND_SOC_MC13783=m -# CONFIG_SND_SOC_MT6351 is not set -# CONFIG_SND_SOC_MT6358 is not set -# CONFIG_SND_SOC_MT6660 is not set -# CONFIG_SND_SOC_NAU8540 is not set -# CONFIG_SND_SOC_NAU8810 is not set -# CONFIG_SND_SOC_NAU8822 is not set -# CONFIG_SND_SOC_NAU8824 is not set -CONFIG_SND_SOC_TPA6130A2=m -# end of CODEC drivers - -CONFIG_SND_SIMPLE_CARD_UTILS=m -CONFIG_SND_SIMPLE_CARD=m -# CONFIG_SND_AUDIO_GRAPH_CARD is not set -CONFIG_SND_SYNTH_EMUX=m -# CONFIG_SND_XEN_FRONTEND is not set -CONFIG_AC97_BUS=m - -# -# HID support -# -CONFIG_HID=m -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=m -CONFIG_HID_GENERIC=m - -# -# Special HID drivers -# -CONFIG_HID_A4TECH=m -# CONFIG_HID_ACCUTOUCH is not set -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -# CONFIG_HID_APPLEIR is not set -CONFIG_HID_ASUS=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -# CONFIG_HID_BIGBEN_FF is not set -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_COUGAR=m -CONFIG_HID_MACALLY=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CMEDIA=m -CONFIG_HID_CP2112=m -CONFIG_HID_CREATIVE_SB0540=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -# CONFIG_HID_ELAN is not set -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -# CONFIG_HID_GFRM is not set -CONFIG_HID_GLORIOUS=m -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -# CONFIG_HID_GOOGLE_HAMMER is not set -# CONFIG_HID_GT683R is not set -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -# CONFIG_HID_VIEWSONIC is not set -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m -# CONFIG_HID_ITE is not set -CONFIG_HID_JABRA=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LCPOWER=m -CONFIG_HID_LED=m -CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m -# CONFIG_HID_MALTRON is not set -# CONFIG_HID_MAYFLASH is not set -# CONFIG_HID_REDRAGON is not set -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -# CONFIG_HID_NTI is not set -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -# CONFIG_HID_RETRODE is not set -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -# CONFIG_HID_STEAM is not set -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -# CONFIG_HID_UDRAW_PS3 is not set -CONFIG_HID_U2FZERO=m -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m -CONFIG_HID_ALPS=m -CONFIG_HID_MCP2221=m -# end of Special HID drivers - -# -# USB HID support -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# end of USB HID Boot Protocol drivers -# end of USB HID support - -# -# I2C HID support -# -# CONFIG_I2C_HID is not set -# end of I2C HID support -# end of HID support - -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_USB_CONN_GPIO=m -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=m -CONFIG_USB_PCI=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_LEDS_TRIGGER_USBPORT=m -CONFIG_USB_AUTOSUSPEND_DELAY=2 -CONFIG_USB_MON=m - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_XHCI_HCD=m -# CONFIG_USB_XHCI_DBGCAP is not set -CONFIG_USB_XHCI_PCI=m -CONFIG_USB_XHCI_PLATFORM=m -CONFIG_USB_XHCI_MVEBU=m -CONFIG_USB_XHCI_TEGRA=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=m -CONFIG_USB_EHCI_FSL=m -CONFIG_USB_EHCI_MXC=m -CONFIG_USB_EHCI_HCD_OMAP=m -CONFIG_USB_EHCI_HCD_ORION=m -CONFIG_USB_EHCI_TEGRA=m -CONFIG_USB_EHCI_EXYNOS=m -CONFIG_USB_EHCI_HCD_PLATFORM=m -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_FOTG210_HCD is not set -# CONFIG_USB_MAX3421_HCD is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_OMAP3=m -CONFIG_USB_OHCI_HCD_PCI=m -# CONFIG_USB_OHCI_HCD_SSB is not set -CONFIG_USB_OHCI_EXYNOS=m -CONFIG_USB_OHCI_HCD_PLATFORM=m -# CONFIG_USB_UHCI_HCD is not set -CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC=y -CONFIG_USB_UHCI_PLATFORM=y -CONFIG_USB_U132_HCD=m -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_IMX21_HCD is not set -# CONFIG_USB_HCD_BCMA is not set -# CONFIG_USB_HCD_SSB is not set -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -# CONFIG_USBIP_CORE is not set -CONFIG_USB_CDNS3=m -# CONFIG_USB_CDNS3_GADGET is not set -# CONFIG_USB_CDNS3_HOST is not set -CONFIG_USB_CDNS3_IMX=m -CONFIG_USB_MUSB_HDRC=m -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y - -# -# Platform Glue Layer -# -CONFIG_USB_MUSB_SUNXI=m -CONFIG_USB_MUSB_TUSB6010=m -CONFIG_USB_MUSB_OMAP2PLUS=m -CONFIG_USB_MUSB_AM35X=m -CONFIG_USB_MUSB_DSPS=m - -# -# MUSB DMA mode -# -# CONFIG_MUSB_PIO_ONLY is not set -CONFIG_USB_INVENTRA_DMA=y -CONFIG_USB_TI_CPPI41_DMA=y -CONFIG_USB_TUSB_OMAP_DMA=y -CONFIG_USB_DWC3=m -# CONFIG_USB_DWC3_ULPI is not set -# CONFIG_USB_DWC3_HOST is not set -# CONFIG_USB_DWC3_GADGET is not set -CONFIG_USB_DWC3_DUAL_ROLE=y - -# -# Platform Glue Driver Support -# -CONFIG_USB_DWC3_OMAP=m -CONFIG_USB_DWC3_EXYNOS=m -CONFIG_USB_DWC3_HAPS=m -CONFIG_USB_DWC3_OF_SIMPLE=m -CONFIG_USB_DWC2=m -# CONFIG_USB_DWC2_HOST is not set - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -# CONFIG_USB_DWC2_PERIPHERAL is not set -CONFIG_USB_DWC2_DUAL_ROLE=y -# CONFIG_USB_DWC2_PCI is not set -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_CHIPIDEA=m -CONFIG_USB_CHIPIDEA_OF=m -CONFIG_USB_CHIPIDEA_PCI=m -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -# CONFIG_USB_ISP1760 is not set - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -# CONFIG_USB_SERIAL_F8153X is not set -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7715_PARPORT=y -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -# CONFIG_USB_SERIAL_UPD78F0730 is not set -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_APPLE_MFI_FASTCHARGE=m -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_USB_EHSET_TEST_FIXTURE=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m -# CONFIG_USB_HUB_USB251XB is not set -CONFIG_USB_HSIC_USB3503=m -# CONFIG_USB_HSIC_USB4604 is not set -# CONFIG_USB_LINK_LAYER_TEST is not set -CONFIG_USB_CHAOSKEY=m -# CONFIG_USB_ATM is not set - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=m -CONFIG_AM335X_CONTROL_USB=m -CONFIG_AM335X_PHY_USB=m -CONFIG_TWL6030_USB=m -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_USB_ISP1301 is not set -CONFIG_USB_MXS_PHY=m -CONFIG_USB_TEGRA_PHY=m -CONFIG_USB_ULPI=y -CONFIG_USB_ULPI_VIEWPORT=y -# end of USB Physical Layer drivers - -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -# CONFIG_U_SERIAL_CONSOLE is not set - -# -# USB Peripheral Controller -# -# CONFIG_USB_FSL_USB2 is not set -# CONFIG_USB_FUSB300 is not set -# CONFIG_USB_FOTG210_UDC is not set -# CONFIG_USB_GR_UDC is not set -# CONFIG_USB_R8A66597 is not set -# CONFIG_USB_PXA27X is not set -# CONFIG_USB_MV_UDC is not set -# CONFIG_USB_MV_U3D is not set -# CONFIG_USB_SNP_UDC_PLAT is not set -# CONFIG_USB_M66592 is not set -# CONFIG_USB_BDC_UDC is not set -# CONFIG_USB_AMD5536UDC is not set -# CONFIG_USB_NET2272 is not set -CONFIG_USB_NET2280=m -# CONFIG_USB_GOKU is not set -# CONFIG_USB_EG20T is not set -# CONFIG_USB_GADGET_XILINX is not set -CONFIG_USB_MAX3420_UDC=m -CONFIG_USB_TEGRA_XUDC=m -# CONFIG_USB_DUMMY_HCD is not set -# end of USB Peripheral Controller - -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_F_SS_LB=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_U_AUDIO=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_NCM=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_PHONET=m -CONFIG_USB_F_EEM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -CONFIG_USB_F_FS=m -CONFIG_USB_F_UAC1=m -CONFIG_USB_F_UAC2=m -CONFIG_USB_F_UVC=m -CONFIG_USB_F_MIDI=m -CONFIG_USB_F_HID=m -CONFIG_USB_F_PRINTER=m -CONFIG_USB_CONFIGFS=m -CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_ACM=y -CONFIG_USB_CONFIGFS_OBEX=y -CONFIG_USB_CONFIGFS_NCM=y -CONFIG_USB_CONFIGFS_ECM=y -CONFIG_USB_CONFIGFS_ECM_SUBSET=y -CONFIG_USB_CONFIGFS_RNDIS=y -CONFIG_USB_CONFIGFS_EEM=y -CONFIG_USB_CONFIGFS_PHONET=y -CONFIG_USB_CONFIGFS_MASS_STORAGE=y -CONFIG_USB_CONFIGFS_F_LB_SS=y -CONFIG_USB_CONFIGFS_F_FS=y -CONFIG_USB_CONFIGFS_F_UAC1=y -# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set -CONFIG_USB_CONFIGFS_F_UAC2=y -CONFIG_USB_CONFIGFS_F_MIDI=y -CONFIG_USB_CONFIGFS_F_HID=y -CONFIG_USB_CONFIGFS_F_UVC=y -CONFIG_USB_CONFIGFS_F_PRINTER=y -# CONFIG_USB_CONFIGFS_F_TCM is not set - -# -# USB Gadget precomposed configurations -# -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_ETH_EEM is not set -# CONFIG_USB_G_NCM is not set -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m -CONFIG_USB_FUNCTIONFS_ETH=y -CONFIG_USB_FUNCTIONFS_RNDIS=y -CONFIG_USB_FUNCTIONFS_GENERIC=y -# CONFIG_USB_MASS_STORAGE is not set -# CONFIG_USB_GADGET_TARGET is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -CONFIG_USB_G_NOKIA=m -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_WEBCAM is not set -CONFIG_USB_RAW_GADGET=m -# end of USB Gadget precomposed configurations - -# CONFIG_TYPEC is not set -CONFIG_USB_ROLE_SWITCH=m -CONFIG_MMC=y -CONFIG_PWRSEQ_EMMC=y -# CONFIG_PWRSEQ_SD8787 is not set -CONFIG_PWRSEQ_SIMPLE=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_MINORS=256 -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_ARMMMCI=m -CONFIG_MMC_STM32_SDMMC=y -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=y -CONFIG_MMC_SDHCI_PLTFM=m -# CONFIG_MMC_SDHCI_OF_ARASAN is not set -# CONFIG_MMC_SDHCI_OF_ASPEED is not set -# CONFIG_MMC_SDHCI_OF_AT91 is not set -# CONFIG_MMC_SDHCI_OF_ESDHC is not set -# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set -# CONFIG_MMC_SDHCI_CADENCE is not set -CONFIG_MMC_SDHCI_ESDHC_IMX=m -CONFIG_MMC_SDHCI_TEGRA=m -CONFIG_MMC_SDHCI_S3C=m -CONFIG_MMC_SDHCI_PXAV3=m -# CONFIG_MMC_SDHCI_S3C_DMA is not set -# CONFIG_MMC_SDHCI_F_SDH30 is not set -# CONFIG_MMC_SDHCI_MILBEAUT is not set -CONFIG_MMC_SDHCI_IPROC=m -CONFIG_MMC_OMAP=m -CONFIG_MMC_OMAP_HS=m -CONFIG_MMC_ALCOR=m -# CONFIG_MMC_MXC is not set -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_MVSDIO=m -CONFIG_MMC_SPI=m -CONFIG_MMC_CB710=m -CONFIG_MMC_VIA_SDMMC=m -CONFIG_MMC_DW=m -CONFIG_MMC_DW_PLTFM=m -# CONFIG_MMC_DW_BLUEFIELD is not set -CONFIG_MMC_DW_EXYNOS=m -# CONFIG_MMC_DW_HI3798CV200 is not set -# CONFIG_MMC_DW_K3 is not set -# CONFIG_MMC_DW_PCI is not set -CONFIG_MMC_DW_ROCKCHIP=m -CONFIG_MMC_VUB300=m -CONFIG_MMC_USHC=m -CONFIG_MMC_WMT=m -# CONFIG_MMC_USDHI6ROL0 is not set -CONFIG_MMC_REALTEK_PCI=m -CONFIG_MMC_REALTEK_USB=m -CONFIG_MMC_SUNXI=m -CONFIG_MMC_CQHCI=m -CONFIG_MMC_HSQ=m -CONFIG_MMC_TOSHIBA_PCI=m -CONFIG_MMC_BCM2835=m -# CONFIG_MMC_MTK is not set -# CONFIG_MMC_SDHCI_XENON is not set -# CONFIG_MMC_SDHCI_OMAP is not set -CONFIG_MMC_SDHCI_AM654=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m -# CONFIG_MS_BLOCK is not set - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_MEMSTICK_R592=m -CONFIG_MEMSTICK_REALTEK_PCI=m -CONFIG_MEMSTICK_REALTEK_USB=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -# CONFIG_LEDS_CLASS_FLASH is not set -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set - -# -# LED drivers -# -# CONFIG_LEDS_AN30259A is not set -# CONFIG_LEDS_BCM6328 is not set -# CONFIG_LEDS_BCM6358 is not set -# CONFIG_LEDS_CR0014114 is not set -# CONFIG_LEDS_EL15203000 is not set -# CONFIG_LEDS_LM3530 is not set -# CONFIG_LEDS_LM3532 is not set -# CONFIG_LEDS_LM3642 is not set -# CONFIG_LEDS_LM3692X is not set -# CONFIG_LEDS_PCA9532 is not set -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_LP3944=m -# CONFIG_LEDS_LP3952 is not set -CONFIG_LEDS_LP55XX_COMMON=m -# CONFIG_LEDS_LP5521 is not set -CONFIG_LEDS_LP5523=m -# CONFIG_LEDS_LP5562 is not set -# CONFIG_LEDS_LP8501 is not set -# CONFIG_LEDS_LP8860 is not set -CONFIG_LEDS_PCA955X=m -# CONFIG_LEDS_PCA955X_GPIO is not set -# CONFIG_LEDS_PCA963X is not set -CONFIG_LEDS_DA9052=m -CONFIG_LEDS_DAC124S085=m -CONFIG_LEDS_PWM=m -CONFIG_LEDS_REGULATOR=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_LT3593=m -CONFIG_LEDS_MC13783=m -CONFIG_LEDS_NS2=y -CONFIG_LEDS_TCA6507=m -# CONFIG_LEDS_TLC591XX is not set -# CONFIG_LEDS_LM355x is not set -# CONFIG_LEDS_IS31FL319X is not set -# CONFIG_LEDS_IS31FL32XX is not set - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -# CONFIG_LEDS_BLINKM is not set -# CONFIG_LEDS_SYSCON is not set -# CONFIG_LEDS_MLXREG is not set -# CONFIG_LEDS_USER is not set -CONFIG_LEDS_SPI_BYTE=m -CONFIG_LEDS_TI_LMU_COMMON=m -CONFIG_LEDS_LM3697=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_ONESHOT=m -CONFIG_LEDS_TRIGGER_DISK=y -CONFIG_LEDS_TRIGGER_MTD=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_ACTIVITY=m -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - -# -# iptables trigger is under Netfilter config (LED target) -# -CONFIG_LEDS_TRIGGER_TRANSIENT=m -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LEDS_TRIGGER_PANIC=y -# CONFIG_LEDS_TRIGGER_NETDEV is not set -# CONFIG_LEDS_TRIGGER_PATTERN is not set -# CONFIG_LEDS_TRIGGER_AUDIO is not set -CONFIG_ACCESSIBILITY=y -CONFIG_A11Y_BRAILLE_CONSOLE=y -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ON_DEMAND_PAGING=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y -CONFIG_INFINIBAND_MTHCA=m -CONFIG_INFINIBAND_MTHCA_DEBUG=y -CONFIG_INFINIBAND_CXGB4=m -CONFIG_INFINIBAND_I40IW=m -CONFIG_MLX4_INFINIBAND=m -CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_OCRDMA=m -CONFIG_RDMA_RXE=m -CONFIG_RDMA_SIW=m -CONFIG_INFINIBAND_IPOIB=m -CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y -# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_SRPT=m -CONFIG_INFINIBAND_ISER=m -CONFIG_INFINIBAND_ISERT=m -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set -CONFIG_RTC_NVMEM=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_ABB5ZES3 is not set -# CONFIG_RTC_DRV_ABEOZ9 is not set -# CONFIG_RTC_DRV_ABX80X is not set -CONFIG_RTC_DRV_AS3722=y -CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1307_CENTURY is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_HYM8563 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -CONFIG_RTC_DRV_MAX77686=y -CONFIG_RTC_DRV_RK808=y -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_ISL12022 is not set -# CONFIG_RTC_DRV_ISL12026 is not set -# CONFIG_RTC_DRV_X1205 is not set -CONFIG_RTC_DRV_PCF8523=y -# CONFIG_RTC_DRV_PCF85063 is not set -# CONFIG_RTC_DRV_PCF85363 is not set -CONFIG_RTC_DRV_PCF8563=y -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -CONFIG_RTC_DRV_BD70528=m -# CONFIG_RTC_DRV_BQ32K is not set -CONFIG_RTC_DRV_TWL4030=y -CONFIG_RTC_DRV_PALMAS=y -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8010 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_RX8025 is not set -# CONFIG_RTC_DRV_EM3027 is not set -# CONFIG_RTC_DRV_RV3028 is not set -# CONFIG_RTC_DRV_RV8803 is not set -CONFIG_RTC_DRV_S5M=y -# CONFIG_RTC_DRV_SD3078 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T93 is not set -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1302 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1343 is not set -# CONFIG_RTC_DRV_DS1347 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6916 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RX4581 is not set -# CONFIG_RTC_DRV_RX6110 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_PCF2123 is not set -# CONFIG_RTC_DRV_MCP795 is not set -CONFIG_RTC_I2C_AND_SPI=y - -# -# SPI and I2C RTC drivers -# -# CONFIG_RTC_DRV_DS3232 is not set -# CONFIG_RTC_DRV_PCF2127 is not set -# CONFIG_RTC_DRV_RV3029C2 is not set - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=m -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1685_FAMILY is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_DS2404 is not set -CONFIG_RTC_DRV_DA9052=y -CONFIG_RTC_DRV_EFI=y -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set -# CONFIG_RTC_DRV_ZYNQMP is not set -CONFIG_RTC_DRV_CROS_EC=m - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_IMXDI=y -CONFIG_RTC_DRV_OMAP=y -CONFIG_HAVE_S3C_RTC=y -# CONFIG_RTC_DRV_S3C is not set -CONFIG_RTC_DRV_PL030=y -CONFIG_RTC_DRV_PL031=y -CONFIG_RTC_DRV_VT8500=y -CONFIG_RTC_DRV_SUN6I=y -CONFIG_RTC_DRV_SUNXI=y -CONFIG_RTC_DRV_MV=y -CONFIG_RTC_DRV_ARMADA38X=y -# CONFIG_RTC_DRV_CADENCE is not set -# CONFIG_RTC_DRV_FTRTC010 is not set -CONFIG_RTC_DRV_MC13XXX=m -CONFIG_RTC_DRV_TEGRA=y -CONFIG_RTC_DRV_MXC=y -CONFIG_RTC_DRV_MXC_V2=m -CONFIG_RTC_DRV_SNVS=y -# CONFIG_RTC_DRV_R7301 is not set - -# -# HID Sensor RTC drivers -# -# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DMA_OF=y -CONFIG_ALTERA_MSGDMA=m -CONFIG_AMBA_PL08X=y -# CONFIG_AXI_DMAC is not set -CONFIG_DMA_BCM2835=y -CONFIG_DMA_SUN4I=y -CONFIG_DMA_SUN6I=m -# CONFIG_DW_AXI_DMAC is not set -# CONFIG_FSL_EDMA is not set -# CONFIG_FSL_QDMA is not set -CONFIG_IMX_DMA=y -CONFIG_IMX_SDMA=y -# CONFIG_INTEL_IDMA64 is not set -CONFIG_MV_XOR=y -CONFIG_MXS_DMA=y -CONFIG_MX3_IPU=y -CONFIG_MX3_IPU_IRQS=4 -# CONFIG_NBPFAXI_DMA is not set -CONFIG_PL330_DMA=y -CONFIG_PLX_DMA=m -CONFIG_TEGRA20_APB_DMA=y -# CONFIG_QCOM_HIDMA_MGMT is not set -# CONFIG_QCOM_HIDMA is not set -# CONFIG_DW_DMAC is not set -# CONFIG_DW_DMAC_PCI is not set -CONFIG_DW_EDMA=m -CONFIG_DW_EDMA_PCIE=m -CONFIG_SF_PDMA=m -CONFIG_TI_CPPI41=m -CONFIG_TI_EDMA=y -CONFIG_DMA_OMAP=y -CONFIG_TI_DMA_CROSSBAR=y - -# -# DMA Clients -# -CONFIG_ASYNC_TX_DMA=y -# CONFIG_DMATEST is not set -CONFIG_DMA_ENGINE_RAID=y - -# -# DMABUF options -# -CONFIG_SYNC_FILE=y -# CONFIG_SW_SYNC is not set -# CONFIG_UDMABUF is not set -# CONFIG_DMABUF_MOVE_NOTIFY is not set -# CONFIG_DMABUF_SELFTESTS is not set -# CONFIG_DMABUF_HEAPS is not set -# end of DMABUF options - -# CONFIG_AUXDISPLAY is not set -# CONFIG_PANEL is not set -CONFIG_UIO=m -CONFIG_UIO_CIF=m -# CONFIG_UIO_PDRV_GENIRQ is not set -# CONFIG_UIO_DMEM_GENIRQ is not set -CONFIG_UIO_AEC=m -CONFIG_UIO_SERCOS3=m -CONFIG_UIO_PCI_GENERIC=m -CONFIG_UIO_NETX=m -# CONFIG_UIO_PRUSS is not set -CONFIG_UIO_MF624=m -# CONFIG_VFIO is not set -CONFIG_VIRT_DRIVERS=y -CONFIG_VIRTIO=m -CONFIG_VIRTIO_MENU=y -CONFIG_VIRTIO_PCI=m -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_VDPA=m -CONFIG_VIRTIO_BALLOON=m -CONFIG_VIRTIO_INPUT=m -CONFIG_VIRTIO_MMIO=m -# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set -CONFIG_VDPA=m -# CONFIG_VDPA_SIM is not set -CONFIG_IFCVF=m -CONFIG_VHOST_IOTLB=m -CONFIG_VHOST_RING=m -CONFIG_VHOST_DPN=y -CONFIG_VHOST=m -CONFIG_VHOST_MENU=y -CONFIG_VHOST_NET=m -CONFIG_VHOST_SCSI=m -CONFIG_VHOST_VSOCK=m -CONFIG_VHOST_VDPA=m -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set - -# -# Microsoft Hyper-V guest support -# -# end of Microsoft Hyper-V guest support - -# -# Xen driver support -# -CONFIG_XEN_BALLOON=y -CONFIG_XEN_SCRUB_PAGES_DEFAULT=y -CONFIG_XEN_DEV_EVTCHN=m -CONFIG_XEN_BACKEND=y -CONFIG_XENFS=m -CONFIG_XEN_COMPAT_XENFS=y -CONFIG_XEN_SYS_HYPERVISOR=y -CONFIG_XEN_XENBUS_FRONTEND=y -CONFIG_XEN_GNTDEV=m -CONFIG_XEN_GRANT_DEV_ALLOC=m -# CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_SWIOTLB_XEN=y -CONFIG_XEN_PVCALLS_FRONTEND=m -# CONFIG_XEN_PVCALLS_BACKEND is not set -CONFIG_XEN_SCSI_BACKEND=m -CONFIG_XEN_PRIVCMD=m -CONFIG_XEN_EFI=y -CONFIG_XEN_AUTO_XLATE=y -# end of Xen driver support - -# CONFIG_GREYBUS is not set -CONFIG_STAGING=y -# CONFIG_PRISM2_USB is not set -# CONFIG_COMEDI is not set -# CONFIG_RTL8192U is not set -# CONFIG_RTLLIB is not set -# CONFIG_RTL8723BS is not set -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -# CONFIG_RTS5208 is not set -# CONFIG_VT6655 is not set -# CONFIG_VT6656 is not set - -# -# IIO staging drivers -# - -# -# Accelerometers -# -# CONFIG_ADIS16203 is not set -# CONFIG_ADIS16240 is not set -# end of Accelerometers - -# -# Analog to digital converters -# -# CONFIG_AD7816 is not set -# CONFIG_AD7280 is not set -# end of Analog to digital converters - -# -# Analog digital bi-direction converters -# -# CONFIG_ADT7316 is not set -# end of Analog digital bi-direction converters - -# -# Capacitance to digital converters -# -# CONFIG_AD7150 is not set -# CONFIG_AD7746 is not set -# end of Capacitance to digital converters - -# -# Direct Digital Synthesis -# -# CONFIG_AD9832 is not set -# CONFIG_AD9834 is not set -# end of Direct Digital Synthesis - -# -# Network Analyzer, Impedance Converters -# -# CONFIG_AD5933 is not set -# end of Network Analyzer, Impedance Converters - -# -# Active energy metering IC -# -# CONFIG_ADE7854 is not set -# end of Active energy metering IC - -# -# Resolver to digital converters -# -# CONFIG_AD2S1210 is not set -# end of Resolver to digital converters -# end of IIO staging drivers - -# CONFIG_FB_SM750 is not set - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -CONFIG_SPEAKUP_SYNTH_DUMMY=m -# end of Speakup console speech - -# CONFIG_MFD_NVEC is not set -# CONFIG_STAGING_MEDIA is not set - -# -# Android -# -# end of Android - -# CONFIG_STAGING_BOARD is not set -# CONFIG_LTE_GDM724X is not set -# CONFIG_FIREWIRE_SERIAL is not set -# CONFIG_GS_FPGABOOT is not set -# CONFIG_UNISYSSPAR is not set -# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set -# CONFIG_FB_TFT is not set -# CONFIG_WILC1000_SDIO is not set -# CONFIG_WILC1000_SPI is not set -# CONFIG_KS7010 is not set -CONFIG_BCM_VIDEOCORE=y -# CONFIG_BCM2835_VCHIQ is not set -# CONFIG_SND_BCM2835 is not set -# CONFIG_VIDEO_BCM2835 is not set -CONFIG_PI433=m - -# -# Gasket devices -# -# end of Gasket devices - -# CONFIG_XIL_AXIS_FIFO is not set -# CONFIG_FIELDBUS_DEV is not set -# CONFIG_KPC2000 is not set -CONFIG_QLGE=m -CONFIG_WFX=m -# CONFIG_GOLDFISH is not set -CONFIG_MFD_CROS_EC=m -CONFIG_CHROME_PLATFORMS=y -CONFIG_CROS_EC=m -CONFIG_CROS_EC_I2C=m -CONFIG_CROS_EC_SPI=m -CONFIG_CROS_EC_PROTO=y -CONFIG_CROS_EC_CHARDEV=m -# CONFIG_CROS_EC_LIGHTBAR is not set -CONFIG_CROS_EC_VBC=m -CONFIG_CROS_EC_DEBUGFS=m -CONFIG_CROS_EC_SENSORHUB=m -CONFIG_CROS_EC_SYSFS=m -CONFIG_CROS_USBPD_LOGGER=m -CONFIG_CROS_USBPD_NOTIFY=m -# CONFIG_MELLANOX_PLATFORM is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -CONFIG_ICST=y -CONFIG_COMMON_CLK_VERSATILE=y -CONFIG_CLK_SP810=y -CONFIG_CLK_VEXPRESS_OSC=y -# CONFIG_CLK_HSDK is not set -CONFIG_COMMON_CLK_MAX77686=m -CONFIG_COMMON_CLK_MAX9485=m -CONFIG_COMMON_CLK_RK808=m -CONFIG_COMMON_CLK_SCMI=m -CONFIG_COMMON_CLK_SI5341=m -# CONFIG_COMMON_CLK_SI5351 is not set -# CONFIG_COMMON_CLK_SI514 is not set -# CONFIG_COMMON_CLK_SI544 is not set -# CONFIG_COMMON_CLK_SI570 is not set -# CONFIG_COMMON_CLK_CDCE706 is not set -# CONFIG_COMMON_CLK_CDCE925 is not set -# CONFIG_COMMON_CLK_CS2000_CP is not set -CONFIG_COMMON_CLK_S2MPS11=m -CONFIG_CLK_TWL6040=m -# CONFIG_CLK_QORIQ is not set -CONFIG_COMMON_CLK_PALMAS=m -# CONFIG_COMMON_CLK_PWM is not set -# CONFIG_COMMON_CLK_VC5 is not set -# CONFIG_COMMON_CLK_BD718XX is not set -# CONFIG_COMMON_CLK_FIXED_MMIO is not set -# CONFIG_CLK_BCM2835 is not set -CONFIG_CLK_RASPBERRYPI=m -CONFIG_MXC_CLK=y -CONFIG_MVEBU_CLK_COMMON=y -CONFIG_MVEBU_CLK_CPU=y -CONFIG_MVEBU_CLK_COREDIV=y -CONFIG_ARMADA_370_CLK=y -CONFIG_ARMADA_375_CLK=y -CONFIG_ARMADA_38X_CLK=y -CONFIG_ARMADA_39X_CLK=y -CONFIG_ARMADA_XP_CLK=y -CONFIG_COMMON_CLK_SAMSUNG=y -CONFIG_EXYNOS_AUDSS_CLK_CON=y -CONFIG_CLK_SUNXI=y -CONFIG_CLK_SUNXI_CLOCKS=y -CONFIG_CLK_SUNXI_PRCM_SUN6I=y -CONFIG_CLK_SUNXI_PRCM_SUN8I=y -CONFIG_CLK_SUNXI_PRCM_SUN9I=y -CONFIG_SUNXI_CCU=y -CONFIG_SUN4I_A10_CCU=y -CONFIG_SUN5I_CCU=y -CONFIG_SUN6I_A31_CCU=y -CONFIG_SUN8I_A23_CCU=y -CONFIG_SUN8I_A33_CCU=y -CONFIG_SUN8I_A83T_CCU=y -CONFIG_SUN8I_H3_CCU=y -CONFIG_SUN8I_V3S_CCU=y -# CONFIG_SUN8I_DE2_CCU is not set -CONFIG_SUN8I_R40_CCU=y -CONFIG_SUN9I_A80_CCU=y -CONFIG_SUN8I_R_CCU=y -CONFIG_TEGRA_CLK_EMC=y -CONFIG_TEGRA_CLK_DFLL=y -CONFIG_COMMON_CLK_TI_ADPLL=y -# end of Common Clock Framework - -# CONFIG_HWSPINLOCK is not set - -# -# Clock Source drivers -# -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_CLKSRC_MMIO=y -CONFIG_BCM2835_TIMER=y -CONFIG_DW_APB_TIMER=y -CONFIG_DW_APB_TIMER_OF=y -CONFIG_ROCKCHIP_TIMER=y -CONFIG_ARMADA_370_XP_TIMER=y -CONFIG_SUN4I_TIMER=y -CONFIG_SUN5I_HSTIMER=y -CONFIG_TEGRA_TIMER=y -CONFIG_VT8500_TIMER=y -CONFIG_CLKSRC_TI_32K=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_GLOBAL_TIMER=y -CONFIG_ARM_TIMER_SP804=y -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y -CONFIG_CLKSRC_EXYNOS_MCT=y -CONFIG_CLKSRC_SAMSUNG_PWM=y -CONFIG_CLKSRC_VERSATILE=y -CONFIG_CLKSRC_IMX_GPT=y -# CONFIG_MICROCHIP_PIT64B is not set -# end of Clock Source drivers - -CONFIG_MAILBOX=y -# CONFIG_ARM_MHU is not set -CONFIG_IMX_MBOX=m -# CONFIG_PLATFORM_MHU is not set -CONFIG_PL320_MBOX=y -# CONFIG_ARMADA_37XX_RWTM_MBOX is not set -CONFIG_OMAP2PLUS_MBOX=y -CONFIG_OMAP_MBOX_KFIFO_SIZE=256 -# CONFIG_ROCKCHIP_MBOX is not set -# CONFIG_ALTERA_MBOX is not set -CONFIG_BCM2835_MBOX=y -# CONFIG_MAILBOX_TEST is not set -# CONFIG_TEGRA_HSP_MBOX is not set -CONFIG_SUN6I_MSGBOX=m -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -CONFIG_IOMMU_IO_PGTABLE=y -CONFIG_IOMMU_IO_PGTABLE_LPAE=y -# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# end of Generic IOMMU Pagetable Support - -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_OF_IOMMU=y -CONFIG_OMAP_IOMMU=y -# CONFIG_OMAP_IOMMU_DEBUG is not set -CONFIG_ROCKCHIP_IOMMU=y -CONFIG_TEGRA_IOMMU_SMMU=y -# CONFIG_EXYNOS_IOMMU is not set -# CONFIG_ARM_SMMU is not set - -# -# Remoteproc drivers -# -# CONFIG_REMOTEPROC is not set -# end of Remoteproc drivers - -# -# Rpmsg drivers -# -# CONFIG_RPMSG_QCOM_GLINK_RPM is not set -# CONFIG_RPMSG_VIRTIO is not set -# end of Rpmsg drivers - -# CONFIG_SOUNDWIRE is not set - -# -# SOC (System On Chip) specific Drivers -# - -# -# Amlogic SoC drivers -# -# end of Amlogic SoC drivers - -# -# Aspeed SoC drivers -# -# end of Aspeed SoC drivers - -# -# Broadcom SoC drivers -# -CONFIG_BCM2835_POWER=y -CONFIG_RASPBERRYPI_POWER=y -# CONFIG_SOC_BRCMSTB is not set -# end of Broadcom SoC drivers - -# -# NXP/Freescale QorIQ SoC drivers -# -# CONFIG_QUICC_ENGINE is not set -CONFIG_FSL_RCPM=y -# end of NXP/Freescale QorIQ SoC drivers - -# -# i.MX SoC drivers -# -CONFIG_IMX_GPCV2_PM_DOMAINS=y -CONFIG_SOC_IMX8M=y -# end of i.MX SoC drivers - -# -# Qualcomm SoC drivers -# -# end of Qualcomm SoC drivers - -CONFIG_ROCKCHIP_GRF=y -CONFIG_ROCKCHIP_PM_DOMAINS=y -CONFIG_SOC_SAMSUNG=y -CONFIG_EXYNOS_ASV=y -CONFIG_EXYNOS_ASV_ARM=y -CONFIG_EXYNOS_CHIPID=y -CONFIG_EXYNOS_PMU=y -CONFIG_EXYNOS_PMU_ARM_DRIVERS=y -CONFIG_EXYNOS_PM_DOMAINS=y -CONFIG_SUNXI_SRAM=y -# CONFIG_ARCH_TEGRA_2x_SOC is not set -# CONFIG_ARCH_TEGRA_3x_SOC is not set -# CONFIG_ARCH_TEGRA_114_SOC is not set -CONFIG_ARCH_TEGRA_124_SOC=y -CONFIG_SOC_TEGRA_FUSE=y -CONFIG_SOC_TEGRA_FLOWCTRL=y -CONFIG_SOC_TEGRA_PMC=y -# CONFIG_SOC_TI is not set - -# -# Xilinx SoC drivers -# -# CONFIG_XILINX_VCU is not set -# end of Xilinx SoC drivers -# end of SOC (System On Chip) specific Drivers - -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m -# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set -# CONFIG_DEVFREQ_GOV_POWERSAVE is not set -CONFIG_DEVFREQ_GOV_USERSPACE=m -# CONFIG_DEVFREQ_GOV_PASSIVE is not set - -# -# DEVFREQ Drivers -# -# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set -CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m -CONFIG_ARM_TEGRA_DEVFREQ=m -# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set -# CONFIG_PM_DEVFREQ_EVENT is not set -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -# CONFIG_EXTCON_ADC_JACK is not set -CONFIG_EXTCON_FSA9480=m -# CONFIG_EXTCON_GPIO is not set -# CONFIG_EXTCON_MAX3355 is not set -CONFIG_EXTCON_PALMAS=m -CONFIG_EXTCON_PTN5150=m -# CONFIG_EXTCON_RT8973A is not set -# CONFIG_EXTCON_SM5502 is not set -CONFIG_EXTCON_USB_GPIO=m -CONFIG_EXTCON_USBC_CROS_EC=m -CONFIG_MEMORY=y -CONFIG_DDR=y -# CONFIG_ARM_PL172_MPMC is not set -CONFIG_TI_EMIF=m -CONFIG_OMAP_GPMC=y -# CONFIG_OMAP_GPMC_DEBUG is not set -CONFIG_TI_EMIF_SRAM=m -CONFIG_MVEBU_DEVBUS=y -CONFIG_PL353_SMC=y -CONFIG_SAMSUNG_MC=y -CONFIG_EXYNOS_SROM=y -CONFIG_TEGRA_MC=y -CONFIG_TEGRA124_EMC=y -CONFIG_IIO=m -CONFIG_IIO_BUFFER=y -CONFIG_IIO_BUFFER_CB=m -# CONFIG_IIO_BUFFER_HW_CONSUMER is not set -CONFIG_IIO_KFIFO_BUF=m -CONFIG_IIO_TRIGGERED_BUFFER=m -# CONFIG_IIO_CONFIGFS is not set -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -# CONFIG_IIO_SW_DEVICE is not set -# CONFIG_IIO_SW_TRIGGER is not set - -# -# Accelerometers -# -# CONFIG_ADIS16201 is not set -# CONFIG_ADIS16209 is not set -# CONFIG_ADXL345_I2C is not set -# CONFIG_ADXL345_SPI is not set -# CONFIG_ADXL372_SPI is not set -# CONFIG_ADXL372_I2C is not set -# CONFIG_BMA180 is not set -# CONFIG_BMA220 is not set -CONFIG_BMA400=m -CONFIG_BMA400_I2C=m -# CONFIG_BMC150_ACCEL is not set -# CONFIG_DA280 is not set -# CONFIG_DA311 is not set -# CONFIG_DMARD06 is not set -# CONFIG_DMARD09 is not set -# CONFIG_DMARD10 is not set -CONFIG_HID_SENSOR_ACCEL_3D=m -CONFIG_IIO_ST_ACCEL_3AXIS=m -CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m -CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m -# CONFIG_KXSD9 is not set -# CONFIG_KXCJK1013 is not set -# CONFIG_MC3230 is not set -# CONFIG_MMA7455_I2C is not set -# CONFIG_MMA7455_SPI is not set -# CONFIG_MMA7660 is not set -CONFIG_MMA8452=m -# CONFIG_MMA9551 is not set -# CONFIG_MMA9553 is not set -# CONFIG_MXC4005 is not set -# CONFIG_MXC6255 is not set -# CONFIG_SCA3000 is not set -# CONFIG_STK8312 is not set -# CONFIG_STK8BA50 is not set -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD7091R5=m -# CONFIG_AD7124 is not set -# CONFIG_AD7192 is not set -# CONFIG_AD7266 is not set -# CONFIG_AD7291 is not set -# CONFIG_AD7292 is not set -# CONFIG_AD7298 is not set -# CONFIG_AD7476 is not set -# CONFIG_AD7606_IFACE_PARALLEL is not set -# CONFIG_AD7606_IFACE_SPI is not set -# CONFIG_AD7766 is not set -# CONFIG_AD7768_1 is not set -# CONFIG_AD7780 is not set -# CONFIG_AD7791 is not set -# CONFIG_AD7793 is not set -# CONFIG_AD7887 is not set -# CONFIG_AD7923 is not set -# CONFIG_AD7949 is not set -# CONFIG_AD799X is not set -CONFIG_AXP20X_ADC=m -CONFIG_AXP288_ADC=m -# CONFIG_CC10001_ADC is not set -# CONFIG_ENVELOPE_DETECTOR is not set -CONFIG_EXYNOS_ADC=m -# CONFIG_HI8435 is not set -# CONFIG_HX711 is not set -# CONFIG_INA2XX_ADC is not set -# CONFIG_IMX7D_ADC is not set -CONFIG_LTC2471=m -# CONFIG_LTC2485 is not set -# CONFIG_LTC2496 is not set -# CONFIG_LTC2497 is not set -# CONFIG_MAX1027 is not set -# CONFIG_MAX11100 is not set -# CONFIG_MAX1118 is not set -# CONFIG_MAX1363 is not set -# CONFIG_MAX9611 is not set -# CONFIG_MCP320X is not set -# CONFIG_MCP3422 is not set -# CONFIG_MCP3911 is not set -# CONFIG_NAU7802 is not set -# CONFIG_PALMAS_GPADC is not set -CONFIG_ROCKCHIP_SARADC=m -CONFIG_SD_ADC_MODULATOR=m -# CONFIG_STMPE_ADC is not set -# CONFIG_SUN4I_GPADC is not set -# CONFIG_TI_ADC081C is not set -# CONFIG_TI_ADC0832 is not set -# CONFIG_TI_ADC084S021 is not set -# CONFIG_TI_ADC12138 is not set -# CONFIG_TI_ADC108S102 is not set -# CONFIG_TI_ADC128S052 is not set -# CONFIG_TI_ADC161S626 is not set -# CONFIG_TI_ADS1015 is not set -# CONFIG_TI_ADS7950 is not set -# CONFIG_TI_ADS8344 is not set -# CONFIG_TI_ADS8688 is not set -# CONFIG_TI_ADS124S08 is not set -CONFIG_TI_AM335X_ADC=m -# CONFIG_TI_TLC4541 is not set -CONFIG_TWL4030_MADC=m -# CONFIG_TWL6030_GPADC is not set -# CONFIG_VF610_ADC is not set -CONFIG_VIPERBOARD_ADC=m -CONFIG_XILINX_XADC=m -# end of Analog to digital converters - -# -# Analog Front Ends -# -# CONFIG_IIO_RESCALE is not set -# end of Analog Front Ends - -# -# Amplifiers -# -# CONFIG_AD8366 is not set -# CONFIG_HMC425 is not set -# end of Amplifiers - -# -# Chemical Sensors -# -# CONFIG_ATLAS_PH_SENSOR is not set -# CONFIG_BME680 is not set -CONFIG_CCS811=m -# CONFIG_IAQCORE is not set -# CONFIG_SENSIRION_SGP30 is not set -# CONFIG_SPS30 is not set -# CONFIG_VZ89X is not set -# end of Chemical Sensors - -# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set - -# -# Hid Sensor IIO Common -# -CONFIG_HID_SENSOR_IIO_COMMON=m -CONFIG_HID_SENSOR_IIO_TRIGGER=m -# end of Hid Sensor IIO Common - -# -# SSP Sensor Common -# -# CONFIG_IIO_SSP_SENSORHUB is not set -# end of SSP Sensor Common - -CONFIG_IIO_ST_SENSORS_I2C=m -CONFIG_IIO_ST_SENSORS_SPI=m -CONFIG_IIO_ST_SENSORS_CORE=m - -# -# Digital to analog converters -# -# CONFIG_AD5064 is not set -# CONFIG_AD5360 is not set -# CONFIG_AD5380 is not set -# CONFIG_AD5421 is not set -# CONFIG_AD5446 is not set -# CONFIG_AD5449 is not set -# CONFIG_AD5592R is not set -# CONFIG_AD5593R is not set -# CONFIG_AD5504 is not set -# CONFIG_AD5624R_SPI is not set -# CONFIG_AD5686_SPI is not set -# CONFIG_AD5696_I2C is not set -# CONFIG_AD5755 is not set -# CONFIG_AD5758 is not set -# CONFIG_AD5761 is not set -# CONFIG_AD5764 is not set -# CONFIG_AD5770R is not set -# CONFIG_AD5791 is not set -# CONFIG_AD7303 is not set -# CONFIG_AD8801 is not set -# CONFIG_DPOT_DAC is not set -# CONFIG_DS4424 is not set -# CONFIG_LTC1660 is not set -# CONFIG_LTC2632 is not set -# CONFIG_M62332 is not set -# CONFIG_MAX517 is not set -# CONFIG_MAX5821 is not set -# CONFIG_MCP4725 is not set -# CONFIG_MCP4922 is not set -# CONFIG_TI_DAC082S085 is not set -# CONFIG_TI_DAC5571 is not set -# CONFIG_TI_DAC7311 is not set -# CONFIG_TI_DAC7612 is not set -# CONFIG_VF610_DAC is not set -# end of Digital to analog converters - -# -# IIO dummy driver -# -# end of IIO dummy driver - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# -# CONFIG_AD9523 is not set -# end of Clock Generator/Distribution - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# -# CONFIG_ADF4350 is not set -CONFIG_ADF4371=m -# end of Phase-Locked Loop (PLL) frequency synthesizers -# end of Frequency Synthesizers DDS/PLL - -# -# Digital gyroscope sensors -# -# CONFIG_ADIS16080 is not set -# CONFIG_ADIS16130 is not set -# CONFIG_ADIS16136 is not set -# CONFIG_ADIS16260 is not set -# CONFIG_ADXRS450 is not set -# CONFIG_BMG160 is not set -# CONFIG_FXAS21002C is not set -CONFIG_HID_SENSOR_GYRO_3D=m -# CONFIG_MPU3050_I2C is not set -# CONFIG_IIO_ST_GYRO_3AXIS is not set -# CONFIG_ITG3200 is not set -# end of Digital gyroscope sensors - -# -# Health Sensors -# - -# -# Heart Rate Monitors -# -# CONFIG_AFE4403 is not set -# CONFIG_AFE4404 is not set -# CONFIG_MAX30100 is not set -# CONFIG_MAX30102 is not set -# end of Heart Rate Monitors -# end of Health Sensors - -# -# Humidity sensors -# -# CONFIG_AM2315 is not set -# CONFIG_DHT11 is not set -# CONFIG_HDC100X is not set -# CONFIG_HID_SENSOR_HUMIDITY is not set -# CONFIG_HTS221 is not set -# CONFIG_HTU21 is not set -# CONFIG_SI7005 is not set -# CONFIG_SI7020 is not set -# end of Humidity sensors - -# -# Inertial measurement units -# -# CONFIG_ADIS16400 is not set -# CONFIG_ADIS16460 is not set -# CONFIG_ADIS16480 is not set -# CONFIG_BMI160_I2C is not set -# CONFIG_BMI160_SPI is not set -# CONFIG_FXOS8700_I2C is not set -# CONFIG_FXOS8700_SPI is not set -# CONFIG_KMX61 is not set -# CONFIG_INV_MPU6050_I2C is not set -# CONFIG_INV_MPU6050_SPI is not set -# CONFIG_IIO_ST_LSM6DSX is not set -# end of Inertial measurement units - -# -# Light sensors -# -# CONFIG_ADJD_S311 is not set -# CONFIG_ADUX1020 is not set -# CONFIG_AL3010 is not set -# CONFIG_AL3320A is not set -# CONFIG_APDS9300 is not set -# CONFIG_APDS9960 is not set -# CONFIG_BH1750 is not set -CONFIG_BH1780=m -# CONFIG_CM32181 is not set -# CONFIG_CM3232 is not set -# CONFIG_CM3323 is not set -# CONFIG_CM3605 is not set -# CONFIG_CM36651 is not set -# CONFIG_GP2AP002 is not set -# CONFIG_GP2AP020A00F is not set -# CONFIG_IQS621_ALS is not set -# CONFIG_SENSORS_ISL29018 is not set -# CONFIG_SENSORS_ISL29028 is not set -# CONFIG_ISL29125 is not set -CONFIG_HID_SENSOR_ALS=m -CONFIG_HID_SENSOR_PROX=m -# CONFIG_JSA1212 is not set -# CONFIG_RPR0521 is not set -# CONFIG_LTR501 is not set -# CONFIG_LV0104CS is not set -# CONFIG_MAX44000 is not set -# CONFIG_MAX44009 is not set -# CONFIG_NOA1305 is not set -# CONFIG_OPT3001 is not set -# CONFIG_PA12203001 is not set -# CONFIG_SI1133 is not set -# CONFIG_SI1145 is not set -# CONFIG_STK3310 is not set -# CONFIG_ST_UVIS25 is not set -# CONFIG_TCS3414 is not set -# CONFIG_TCS3472 is not set -CONFIG_SENSORS_TSL2563=m -# CONFIG_TSL2583 is not set -# CONFIG_TSL2772 is not set -# CONFIG_TSL4531 is not set -# CONFIG_US5182D is not set -# CONFIG_VCNL4000 is not set -# CONFIG_VCNL4035 is not set -# CONFIG_VEML6030 is not set -# CONFIG_VEML6070 is not set -# CONFIG_VL6180 is not set -# CONFIG_ZOPT2201 is not set -# end of Light sensors - -# -# Magnetometer sensors -# -# CONFIG_AK8974 is not set -# CONFIG_AK8975 is not set -# CONFIG_AK09911 is not set -# CONFIG_BMC150_MAGN_I2C is not set -# CONFIG_BMC150_MAGN_SPI is not set -# CONFIG_MAG3110 is not set -CONFIG_HID_SENSOR_MAGNETOMETER_3D=m -# CONFIG_MMC35240 is not set -# CONFIG_IIO_ST_MAGN_3AXIS is not set -# CONFIG_SENSORS_HMC5843_I2C is not set -# CONFIG_SENSORS_HMC5843_SPI is not set -# CONFIG_SENSORS_RM3100_I2C is not set -# CONFIG_SENSORS_RM3100_SPI is not set -# end of Magnetometer sensors - -# -# Multiplexers -# -# CONFIG_IIO_MUX is not set -# end of Multiplexers - -# -# Inclinometer sensors -# -CONFIG_HID_SENSOR_INCLINOMETER_3D=m -CONFIG_HID_SENSOR_DEVICE_ROTATION=m -# end of Inclinometer sensors - -# -# Triggers - standalone -# -# CONFIG_IIO_INTERRUPT_TRIGGER is not set -# CONFIG_IIO_SYSFS_TRIGGER is not set -# end of Triggers - standalone - -# -# Linear and angular position sensors -# -# CONFIG_IQS624_POS is not set -# end of Linear and angular position sensors - -# -# Digital potentiometers -# -# CONFIG_AD5272 is not set -# CONFIG_DS1803 is not set -# CONFIG_MAX5432 is not set -# CONFIG_MAX5481 is not set -# CONFIG_MAX5487 is not set -# CONFIG_MCP4018 is not set -# CONFIG_MCP4131 is not set -# CONFIG_MCP4531 is not set -# CONFIG_MCP41010 is not set -# CONFIG_TPL0102 is not set -# end of Digital potentiometers - -# -# Digital potentiostats -# -# CONFIG_LMP91000 is not set -# end of Digital potentiostats - -# -# Pressure sensors -# -# CONFIG_ABP060MG is not set -# CONFIG_BMP280 is not set -# CONFIG_DLHL60D is not set -CONFIG_DPS310=m -CONFIG_HID_SENSOR_PRESS=m -# CONFIG_HP03 is not set -# CONFIG_ICP10100 is not set -# CONFIG_MPL115_I2C is not set -# CONFIG_MPL115_SPI is not set -# CONFIG_MPL3115 is not set -# CONFIG_MS5611 is not set -# CONFIG_MS5637 is not set -# CONFIG_IIO_ST_PRESS is not set -# CONFIG_T5403 is not set -# CONFIG_HP206C is not set -# CONFIG_ZPA2326 is not set -# end of Pressure sensors - -# -# Lightning sensors -# -# CONFIG_AS3935 is not set -# end of Lightning sensors - -# -# Proximity and distance sensors -# -# CONFIG_ISL29501 is not set -# CONFIG_LIDAR_LITE_V2 is not set -# CONFIG_MB1232 is not set -# CONFIG_PING is not set -# CONFIG_RFD77402 is not set -# CONFIG_SRF04 is not set -# CONFIG_SX9500 is not set -# CONFIG_SRF08 is not set -# CONFIG_VL53L0X_I2C is not set -# end of Proximity and distance sensors - -# -# Resolver to digital converters -# -# CONFIG_AD2S90 is not set -# CONFIG_AD2S1200 is not set -# end of Resolver to digital converters - -# -# Temperature sensors -# -# CONFIG_IQS620AT_TEMP is not set -# CONFIG_LTC2983 is not set -# CONFIG_MAXIM_THERMOCOUPLE is not set -# CONFIG_HID_SENSOR_TEMP is not set -# CONFIG_MLX90614 is not set -# CONFIG_MLX90632 is not set -# CONFIG_TMP006 is not set -# CONFIG_TMP007 is not set -# CONFIG_TSYS01 is not set -# CONFIG_TSYS02D is not set -# CONFIG_MAX31856 is not set -# end of Temperature sensors - -# CONFIG_NTB is not set -# CONFIG_VME_BUS is not set -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -# CONFIG_PWM_DEBUG is not set -CONFIG_PWM_BCM2835=m -# CONFIG_PWM_CROS_EC is not set -# CONFIG_PWM_FSL_FTM is not set -# CONFIG_PWM_IMX1 is not set -# CONFIG_PWM_IMX27 is not set -CONFIG_PWM_IMX_TPM=m -CONFIG_PWM_OMAP_DMTIMER=m -# CONFIG_PWM_PCA9685 is not set -CONFIG_PWM_ROCKCHIP=m -CONFIG_PWM_SAMSUNG=m -# CONFIG_PWM_STMPE is not set -CONFIG_PWM_SUN4I=m -CONFIG_PWM_TEGRA=m -CONFIG_PWM_TIECAP=m -CONFIG_PWM_TIEHRPWM=m -CONFIG_PWM_TWL=m -CONFIG_PWM_TWL_LED=m -CONFIG_PWM_VT8500=m - -# -# IRQ chip support -# -CONFIG_IRQCHIP=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GIC_MAX_NR=1 -CONFIG_ARM_GIC_V2M=y -CONFIG_GIC_NON_BANKED=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -CONFIG_ARM_GIC_V3_ITS_PCI=y -CONFIG_ARMADA_370_XP_IRQ=y -# CONFIG_AL_FIC is not set -CONFIG_MADERA_IRQ=m -CONFIG_OMAP_IRQCHIP=y -# CONFIG_TS4800_IRQ is not set -CONFIG_IRQ_CROSSBAR=y -CONFIG_PARTITION_PERCPU=y -CONFIG_IMX_IRQSTEER=y -CONFIG_IMX_INTMUX=y -CONFIG_EXYNOS_IRQ_COMBINER=y -# end of IRQ chip support - -# CONFIG_IPACK_BUS is not set -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_BRCMSTB_RESCAL=y -CONFIG_RESET_INTEL_GW=y -CONFIG_RESET_SCMI=y -CONFIG_RESET_SIMPLE=y -CONFIG_RESET_SOCFPGA=y -CONFIG_RESET_SUNXI=y -# CONFIG_RESET_TI_SYSCON is not set - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PHY_MIPI_DPHY=y -CONFIG_PHY_SUN4I_USB=m -CONFIG_PHY_SUN6I_MIPI_DPHY=m -CONFIG_PHY_SUN9I_USB=m -CONFIG_PHY_SUN50I_USB3=m -# CONFIG_BCM_KONA_USB2_PHY is not set -CONFIG_PHY_CADENCE_TORRENT=m -# CONFIG_PHY_CADENCE_DPHY is not set -# CONFIG_PHY_CADENCE_SIERRA is not set -# CONFIG_PHY_FSL_IMX8MQ_USB is not set -CONFIG_PHY_MIXEL_MIPI_DPHY=m -CONFIG_ARMADA375_USBCLUSTER_PHY=y -CONFIG_PHY_MVEBU_A3700_COMPHY=m -CONFIG_PHY_MVEBU_A3700_UTMI=m -CONFIG_PHY_MVEBU_A38X_COMPHY=m -CONFIG_PHY_MVEBU_CP110_COMPHY=m -# CONFIG_PHY_PXA_28NM_HSIC is not set -# CONFIG_PHY_PXA_28NM_USB2 is not set -# CONFIG_PHY_CPCAP_USB is not set -# CONFIG_PHY_MAPPHONE_MDM6600 is not set -# CONFIG_PHY_OCELOT_SERDES is not set -CONFIG_PHY_QCOM_USB_HS=m -CONFIG_PHY_QCOM_USB_HSIC=m -CONFIG_PHY_ROCKCHIP_DP=m -CONFIG_PHY_ROCKCHIP_EMMC=m -# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set -# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set -# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set -# CONFIG_PHY_ROCKCHIP_PCIE is not set -# CONFIG_PHY_ROCKCHIP_TYPEC is not set -CONFIG_PHY_ROCKCHIP_USB=m -CONFIG_PHY_EXYNOS_DP_VIDEO=m -CONFIG_PHY_EXYNOS_MIPI_VIDEO=m -# CONFIG_PHY_EXYNOS_PCIE is not set -CONFIG_PHY_SAMSUNG_USB2=m -CONFIG_PHY_EXYNOS4210_USB2=y -CONFIG_PHY_EXYNOS4X12_USB2=y -CONFIG_PHY_EXYNOS5250_USB2=y -CONFIG_PHY_EXYNOS5_USBDRD=m -CONFIG_PHY_EXYNOS5250_SATA=m -CONFIG_PHY_TEGRA_XUSB=m -# CONFIG_PHY_DM816X_USB is not set -CONFIG_OMAP_CONTROL_PHY=m -CONFIG_OMAP_USB2=m -CONFIG_TI_PIPE3=m -CONFIG_PHY_TUSB1210=m -CONFIG_TWL4030_USB=m -CONFIG_PHY_TI_GMII_SEL=m -# CONFIG_PHY_INTEL_EMMC is not set -# end of PHY Subsystem - -# CONFIG_POWERCAP is not set -# CONFIG_MCB is not set - -# -# Performance monitor support -# -# CONFIG_ARM_CCI_PMU is not set -# CONFIG_ARM_CCN is not set -CONFIG_ARM_PMU=y -CONFIG_FSL_IMX8_DDR_PMU=m -# end of Performance monitor support - -CONFIG_RAS=y - -# -# Android -# -# CONFIG_ANDROID is not set -# end of Android - -CONFIG_DAX=m -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -# CONFIG_NVMEM_IMX_IIM is not set -# CONFIG_NVMEM_IMX_OCOTP is not set -CONFIG_ROCKCHIP_EFUSE=m -CONFIG_ROCKCHIP_OTP=m -CONFIG_NVMEM_SUNXI_SID=m -CONFIG_NVMEM_SNVS_LPGPR=m - -# -# HW tracing support -# -# CONFIG_STM is not set -# CONFIG_INTEL_TH is not set -# end of HW tracing support - -# CONFIG_FPGA is not set -# CONFIG_FSI is not set -# CONFIG_TEE is not set -CONFIG_MULTIPLEXER=m - -# -# Multiplexer drivers -# -# CONFIG_MUX_ADG792A is not set -# CONFIG_MUX_ADGS1408 is not set -# CONFIG_MUX_GPIO is not set -# CONFIG_MUX_MMIO is not set -# end of Multiplexer drivers - -CONFIG_PM_OPP=y -# CONFIG_SIOX is not set -# CONFIG_SLIMBUS is not set -# CONFIG_INTERCONNECT is not set -CONFIG_COUNTER=m -CONFIG_TI_EQEP=m -CONFIG_FTM_QUADDEC=m -# CONFIG_MOST is not set -# end of Device Drivers - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y -CONFIG_FS_IOMAP=y -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -CONFIG_EXT4_FS=y -CONFIG_EXT4_USE_FOR_EXT2=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -# CONFIG_XFS_ONLINE_SCRUB is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -CONFIG_OCFS2_FS_STATS=y -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -# CONFIG_BTRFS_FS_REF_VERIFY is not set -CONFIG_NILFS2_FS=m -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -CONFIG_F2FS_FS_SECURITY=y -# CONFIG_F2FS_CHECK_FS is not set -# CONFIG_F2FS_IO_TRACE is not set -# CONFIG_F2FS_FAULT_INJECTION is not set -# CONFIG_F2FS_FS_COMPRESSION is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -CONFIG_EXPORTFS_BLOCK_OPS=y -CONFIG_FILE_LOCKING=y -CONFIG_MANDATORY_FILE_LOCKING=y -# CONFIG_FS_ENCRYPTION is not set -CONFIG_FS_VERITY=y -# CONFIG_FS_VERITY_DEBUG is not set -# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -CONFIG_PRINT_QUOTA_WARNING=y -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_AUTOFS4_FS=m -CONFIG_AUTOFS_FS=m -CONFIG_FUSE_FS=m -CONFIG_CUSE=m -CONFIG_VIRTIO_FS=m -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set -# CONFIG_OVERLAY_FS_INDEX is not set -# CONFIG_OVERLAY_FS_METACOPY is not set - -# -# Caches -# -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=m -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set -# end of Caches - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -# end of CD-ROM/DVD Filesystems - -# -# DOS/FAT/EXFAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_FAT_DEFAULT_UTF8 is not set -CONFIG_EXFAT_FS=m -CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -# end of DOS/FAT/EXFAT/NT Filesystems - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_CHILDREN=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -CONFIG_MEMFD_CREATE=y -CONFIG_CONFIGFS_FS=m -CONFIG_EFIVAR_FS=m -# end of Pseudo filesystems - -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ORANGEFS_FS is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_ECRYPT_FS=m -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_UBIFS_FS=m -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UBIFS_FS_ZSTD=y -# CONFIG_UBIFS_ATIME_SUPPORT is not set -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_SECURITY=y -CONFIG_UBIFS_FS_AUTHENTICATION=y -# CONFIG_CRAMFS is not set -CONFIG_SQUASHFS=m -CONFIG_SQUASHFS_FILE_CACHE=y -# CONFIG_SQUASHFS_FILE_DIRECT is not set -CONFIG_SQUASHFS_DECOMP_SINGLE=y -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -# CONFIG_SQUASHFS_LZ4 is not set -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -# CONFIG_SQUASHFS_ZSTD is not set -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_QNX6FS_FS=m -# CONFIG_QNX6FS_DEBUG is not set -CONFIG_ROMFS_FS=m -# CONFIG_ROMFS_BACKED_BY_BLOCK is not set -# CONFIG_ROMFS_BACKED_BY_MTD is not set -CONFIG_ROMFS_BACKED_BY_BOTH=y -CONFIG_ROMFS_ON_BLOCK=y -CONFIG_ROMFS_ON_MTD=y -# CONFIG_PSTORE is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_ZIP is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V2=m -CONFIG_NFS_V3=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_PNFS_FILE_LAYOUT=m -CONFIG_PNFS_BLOCK=m -CONFIG_PNFS_FLEXFILE_LAYOUT=m -CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" -# CONFIG_NFS_V4_1_MIGRATION is not set -CONFIG_NFS_V4_SECURITY_LABEL=y -CONFIG_NFS_FSCACHE=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFS_DEBUG=y -# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_PNFS=y -CONFIG_NFSD_BLOCKLAYOUT=y -# CONFIG_NFSD_SCSILAYOUT is not set -# CONFIG_NFSD_FLEXFILELAYOUT is not set -CONFIG_NFSD_V4_SECURITY_LABEL=y -CONFIG_GRACE_PERIOD=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BACKCHANNEL=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y -CONFIG_SUNRPC_DEBUG=y -CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_CEPH_FS=m -CONFIG_CEPH_FSCACHE=y -CONFIG_CEPH_FS_POSIX_ACL=y -CONFIG_CEPH_FS_SECURITY_LABEL=y -CONFIG_CIFS=m -# CONFIG_CIFS_STATS2 is not set -CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set -CONFIG_CIFS_DFS_UPCALL=y -# CONFIG_CIFS_SMB_DIRECT is not set -CONFIG_CIFS_FSCACHE=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_AFS_FSCACHE=y -# CONFIG_AFS_DEBUG_CURSOR is not set -CONFIG_9P_FS=m -CONFIG_9P_FSCACHE=y -CONFIG_9P_FS_POSIX_ACL=y -CONFIG_9P_FS_SECURITY=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_DLM_DEBUG=y -# CONFIG_UNICODE is not set -CONFIG_IO_WQ=y -# end of File systems - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_REQUEST_CACHE=y -# CONFIG_PERSISTENT_KEYRINGS is not set -# CONFIG_BIG_KEYS is not set -# CONFIG_TRUSTED_KEYS is not set -# CONFIG_ENCRYPTED_KEYS is not set -# CONFIG_KEY_DH_OPERATIONS is not set -CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SECURITY=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -# CONFIG_SECURITY_INFINIBAND is not set -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_PATH=y -CONFIG_LSM_MMAP_MIN_ADDR=32768 -CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_HARDENED_USERCOPY_FALLBACK=y -# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set -CONFIG_FORTIFY_SOURCE=y -# CONFIG_STATIC_USERMODEHELPER is not set -CONFIG_SECURITY_SELINUX=y -# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set -# CONFIG_SECURITY_SELINUX_DISABLE is not set -CONFIG_SECURITY_SELINUX_DEVELOP=y -CONFIG_SECURITY_SELINUX_AVC_STATS=y -CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0 -CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9 -CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256 -# CONFIG_SECURITY_SMACK is not set -CONFIG_SECURITY_TOMOYO=y -CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 -CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 -# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set -CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" -CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" -# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set -CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_HASH=y -CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y -# CONFIG_SECURITY_APPARMOR_DEBUG is not set -# CONFIG_SECURITY_LOADPIN is not set -CONFIG_SECURITY_YAMA=y -# CONFIG_SECURITY_SAFESETID is not set -# CONFIG_SECURITY_LOCKDOWN_LSM is not set -CONFIG_INTEGRITY=y -CONFIG_INTEGRITY_SIGNATURE=y -CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y -CONFIG_INTEGRITY_TRUSTED_KEYRING=y -CONFIG_INTEGRITY_AUDIT=y -CONFIG_IMA=y -CONFIG_IMA_MEASURE_PCR_IDX=10 -CONFIG_IMA_LSM_RULES=y -# CONFIG_IMA_TEMPLATE is not set -CONFIG_IMA_NG_TEMPLATE=y -# CONFIG_IMA_SIG_TEMPLATE is not set -CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" -# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set -CONFIG_IMA_DEFAULT_HASH_SHA256=y -CONFIG_IMA_DEFAULT_HASH="sha256" -# CONFIG_IMA_WRITE_POLICY is not set -# CONFIG_IMA_READ_POLICY is not set -CONFIG_IMA_APPRAISE=y -# CONFIG_IMA_ARCH_POLICY is not set -# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set -CONFIG_IMA_APPRAISE_BOOTPARAM=y -# CONFIG_IMA_APPRAISE_MODSIG is not set -CONFIG_IMA_TRUSTED_KEYRING=y -# CONFIG_IMA_BLACKLIST_KEYRING is not set -# CONFIG_IMA_LOAD_X509 is not set -CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y -CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y -# CONFIG_EVM is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_APPARMOR=y -# CONFIG_DEFAULT_SECURITY_DAC is not set -CONFIG_LSM="yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo" - -# -# Kernel hardening options -# - -# -# Memory initialization -# -CONFIG_INIT_STACK_NONE=y -CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y -# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set -# end of Memory initialization -# end of Kernel hardening options -# end of Security options - -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_SKCIPHER=m -CONFIG_CRYPTO_SKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=m -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=m -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m -# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set -# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_ENGINE=m - -# -# Public-key cryptography -# -CONFIG_CRYPTO_RSA=y -# CONFIG_CRYPTO_DH is not set -CONFIG_CRYPTO_ECC=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_ECRDSA=m -CONFIG_CRYPTO_CURVE25519=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_SEQIV=m -CONFIG_CRYPTO_ECHAINIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_CFB=m -CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_OFB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -# CONFIG_CRYPTO_KEYWRAP is not set -CONFIG_CRYPTO_NHPOLY1305=m -CONFIG_CRYPTO_ADIANTUM=m -CONFIG_CRYPTO_ESSIV=m - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_XXHASH=m -CONFIG_CRYPTO_BLAKE2B=m -CONFIG_CRYPTO_BLAKE2S=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_GHASH=m -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_SHA3 is not set -# CONFIG_CRYPTO_SM3 is not set -CONFIG_CRYPTO_STREEBOG=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_TI is not set -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_BLOWFISH_COMMON=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST_COMMON=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=y -# CONFIG_CRYPTO_842 is not set -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m -CONFIG_CRYPTO_ZSTD=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=m -CONFIG_CRYPTO_DRBG_HMAC=y -# CONFIG_CRYPTO_DRBG_HASH is not set -# CONFIG_CRYPTO_DRBG_CTR is not set -CONFIG_CRYPTO_DRBG=m -CONFIG_CRYPTO_JITTERENTROPY=m -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -# CONFIG_CRYPTO_STATS is not set -CONFIG_CRYPTO_HASH_INFO=y - -# -# Crypto library routines -# -CONFIG_CRYPTO_LIB_AES=y -CONFIG_CRYPTO_LIB_ARC4=m -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=m -CONFIG_CRYPTO_LIB_BLAKE2S=m -CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m -CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m -CONFIG_CRYPTO_LIB_CHACHA=m -CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m -CONFIG_CRYPTO_LIB_CURVE25519=m -CONFIG_CRYPTO_LIB_DES=m -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9 -CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m -CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m -CONFIG_CRYPTO_LIB_POLY1305=m -CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_ALLWINNER=y -CONFIG_CRYPTO_DEV_SUN4I_SS=m -# CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG is not set -CONFIG_CRYPTO_DEV_SUN8I_CE=m -# CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG is not set -CONFIG_CRYPTO_DEV_SUN8I_SS=m -# CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG is not set -# CONFIG_CRYPTO_DEV_FSL_CAAM is not set -# CONFIG_CRYPTO_DEV_OMAP is not set -# CONFIG_CRYPTO_DEV_SAHARA is not set -# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set -# CONFIG_CRYPTO_DEV_S5P is not set -CONFIG_CRYPTO_DEV_ATMEL_I2C=m -CONFIG_CRYPTO_DEV_ATMEL_ECC=m -CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m -# CONFIG_CRYPTO_DEV_MXS_DCP is not set -CONFIG_CRYPTO_DEV_MARVELL=m -CONFIG_CRYPTO_DEV_MARVELL_CESA=m -# CONFIG_CRYPTO_DEV_ROCKCHIP is not set -CONFIG_CRYPTO_DEV_CHELSIO=m -CONFIG_CRYPTO_DEV_VIRTIO=m -# CONFIG_CRYPTO_DEV_SAFEXCEL is not set -# CONFIG_CRYPTO_DEV_CCREE is not set -CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m -# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y -CONFIG_X509_CERTIFICATE_PARSER=y -CONFIG_PKCS8_PRIVATE_KEY_PARSER=m -CONFIG_PKCS7_MESSAGE_PARSER=y -# CONFIG_PKCS7_TEST_KEY is not set -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set - -# -# Certificates for signature checking -# -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set -# CONFIG_SECONDARY_TRUSTED_KEYRING is not set -# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -# end of Certificates for signature checking - -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=m -CONFIG_RAID6_PQ_BENCHMARK=y -CONFIG_PACKING=y -CONFIG_BITREVERSE=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_CORDIC=m -CONFIG_RATIONAL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_STMP_DEVICE=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC64=m -# CONFIG_CRC4 is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -CONFIG_CRC8=m -CONFIG_XXHASH=y -CONFIG_AUDIT_GENERIC=y -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=m -CONFIG_LZ4HC_COMPRESS=m -CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=m -CONFIG_XZ_DEC=y -# CONFIG_XZ_DEC_X86 is not set -# CONFIG_XZ_DEC_POWERPC is not set -# CONFIG_XZ_DEC_IA64 is not set -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -# CONFIG_XZ_DEC_SPARC is not set -CONFIG_XZ_DEC_BCJ=y -# CONFIG_XZ_DEC_TEST is not set -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_INTERVAL_TREE=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_DMA=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_DECLARE_COHERENT=y -CONFIG_ARCH_HAS_SETUP_DMA_OPS=y -CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y -CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y -CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y -CONFIG_DMA_VIRT_OPS=y -CONFIG_SWIOTLB=y -CONFIG_DMA_NONCOHERENT_MMAP=y -CONFIG_DMA_REMAP=y -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=16 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 -# CONFIG_DMA_API_DEBUG is not set -CONFIG_SGL_ALLOC=y -CONFIG_CHECK_SIGNATURE=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_LRU_CACHE=m -CONFIG_CLZ_TAB=y -CONFIG_IRQ_POLL=y -CONFIG_MPILIB=y -CONFIG_SIGNATURE=y -CONFIG_DIMLIB=y -CONFIG_LIBFDT=y -CONFIG_OID_REGISTRY=y -CONFIG_UCS2_STRING=y -CONFIG_HAVE_GENERIC_VDSO=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_FONT_SUPPORT=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -CONFIG_FONT_6x10=y -# CONFIG_FONT_10x18 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -CONFIG_FONT_TER16x32=y -CONFIG_SG_SPLIT=y -CONFIG_SG_POOL=y -CONFIG_SBITMAP=y -# CONFIG_STRING_SELFTEST is not set -# end of Library routines - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -# CONFIG_PRINTK_CALLER is not set -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 -CONFIG_CONSOLE_LOGLEVEL_QUIET=4 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -CONFIG_BOOT_PRINTK_DELAY=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_SYMBOLIC_ERRNAME=y -CONFIG_DEBUG_BUGVERBOSE=y -# end of printk and dmesg options - -# -# Compile-time checks and compiler options -# -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_INFO_REDUCED is not set -# CONFIG_DEBUG_INFO_SPLIT is not set -# CONFIG_DEBUG_INFO_DWARF4 is not set -# CONFIG_DEBUG_INFO_BTF is not set -# CONFIG_GDB_SCRIPTS is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -CONFIG_STRIP_ASM_SYMS=y -# CONFIG_READABLE_ASM is not set -# CONFIG_HEADERS_INSTALL is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_ARCH_WANT_FRAME_POINTERS=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -# end of Compile-time checks and compiler options - -# -# Generic Kernel Debugging Instruments -# -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 -CONFIG_MAGIC_SYSRQ_SERIAL=y -CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE="" -CONFIG_DEBUG_FS=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -# CONFIG_UBSAN is not set -# end of Generic Kernel Debugging Instruments - -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MISC=y - -# -# Memory Debugging -# -CONFIG_PAGE_EXTENSION=y -# CONFIG_PAGE_OWNER is not set -CONFIG_PAGE_POISONING=y -CONFIG_PAGE_POISONING_NO_SANITY=y -# CONFIG_PAGE_POISONING_ZERO is not set -# CONFIG_DEBUG_PAGE_REF is not set -# CONFIG_DEBUG_RODATA_TEST is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_SCHED_STACK_END_CHECK=y -# CONFIG_DEBUG_VM is not set -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -# CONFIG_DEBUG_VIRTUAL is not set -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_DEBUG_HIGHMEM is not set -CONFIG_CC_HAS_KASAN_GENERIC=y -CONFIG_KASAN_STACK=1 -# end of Memory Debugging - -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Oops, Lockups and Hangs -# -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_LOCKUP_DETECTOR=y -CONFIG_SOFTLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -# CONFIG_WQ_WATCHDOG is not set -# CONFIG_TEST_LOCKUP is not set -# end of Debug Oops, Lockups and Hangs - -# -# Scheduler Debugging -# -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -CONFIG_SCHEDSTATS=y -# end of Scheduler Debugging - -# CONFIG_DEBUG_TIMEKEEPING is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -CONFIG_LOCK_DEBUGGING_SUPPORT=y -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_LOCK_TORTURE_TEST is not set -# CONFIG_WW_MUTEX_SELFTEST is not set -# end of Lock Debugging (spinlocks, mutexes, etc...) - -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -# CONFIG_DEBUG_KOBJECT is not set - -# -# Debug kernel data structures -# -CONFIG_DEBUG_LIST=y -# CONFIG_DEBUG_PLIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -CONFIG_BUG_ON_DATA_CORRUPTION=y -# end of Debug kernel data structures - -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -# CONFIG_RCU_PERF_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# end of RCU Debugging - -# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -# CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACER_MAX_TRACE=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -# CONFIG_BOOTTIME_TRACING is not set -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -CONFIG_DYNAMIC_FTRACE=y -CONFIG_DYNAMIC_FTRACE_WITH_REGS=y -# CONFIG_FUNCTION_PROFILER is not set -CONFIG_STACK_TRACER=y -# CONFIG_PREEMPTIRQ_EVENTS is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_HWLAT_TRACER is not set -CONFIG_FTRACE_SYSCALLS=y -CONFIG_TRACER_SNAPSHOT=y -# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_KPROBE_EVENTS=y -CONFIG_UPROBE_EVENTS=y -CONFIG_BPF_EVENTS=y -CONFIG_DYNAMIC_EVENTS=y -CONFIG_PROBE_EVENTS=y -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_TRACE_EVENT_INJECT is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_PREEMPTIRQ_DELAY_TEST is not set -# CONFIG_KPROBE_EVENT_GEN_TEST is not set -# CONFIG_SAMPLES is not set -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -CONFIG_STRICT_DEVMEM=y -CONFIG_IO_STRICT_DEVMEM=y - -# -# arm Debugging -# -CONFIG_ARM_PTDUMP_CORE=y -# CONFIG_ARM_PTDUMP_DEBUGFS is not set -CONFIG_DEBUG_WX=y -CONFIG_UNWINDER_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_LL is not set -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -# CONFIG_ARM_KPROBES_TEST is not set -# CONFIG_PID_IN_CONTEXTIDR is not set -# CONFIG_CORESIGHT is not set -# end of arm Debugging - -# -# Kernel Testing and Coverage -# -# CONFIG_KUNIT is not set -CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_PM_NOTIFIER_ERROR_INJECT=m -# CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT is not set -# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set -# CONFIG_FAULT_INJECTION is not set -CONFIG_ARCH_HAS_KCOV=y -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -# CONFIG_KCOV is not set -CONFIG_RUNTIME_TESTING_MENU=y -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_MIN_HEAP is not set -# CONFIG_TEST_SORT is not set -# CONFIG_KPROBES_SANITY_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_REED_SOLOMON_TEST is not set -# CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_PERCPU_TEST is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_ASYNC_RAID6_TEST is not set -# CONFIG_TEST_HEXDUMP is not set -# CONFIG_TEST_STRING_HELPERS is not set -CONFIG_TEST_STRSCPY=m -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_TEST_PRINTF is not set -# CONFIG_TEST_BITMAP is not set -# CONFIG_TEST_BITFIELD is not set -# CONFIG_TEST_UUID is not set -CONFIG_TEST_XARRAY=m -# CONFIG_TEST_OVERFLOW is not set -# CONFIG_TEST_RHASHTABLE is not set -# CONFIG_TEST_HASH is not set -# CONFIG_TEST_IDA is not set -# CONFIG_TEST_LKM is not set -CONFIG_TEST_VMALLOC=m -CONFIG_TEST_USER_COPY=m -CONFIG_TEST_BPF=m -CONFIG_TEST_BLACKHOLE_DEV=m -CONFIG_FIND_BIT_BENCHMARK=m -CONFIG_TEST_FIRMWARE=m -# CONFIG_TEST_SYSCTL is not set -# CONFIG_TEST_UDELAY is not set -CONFIG_TEST_STATIC_KEYS=m -# CONFIG_TEST_KMOD is not set -# CONFIG_TEST_MEMCAT_P is not set -# CONFIG_TEST_STACKINIT is not set -# CONFIG_TEST_MEMINIT is not set -# CONFIG_MEMTEST is not set -# end of Kernel Testing and Coverage -# end of Kernel hacking diff --git a/gnu/packages/aux-files/linux-libre/5.7-arm64.conf b/gnu/packages/aux-files/linux-libre/5.7-arm64.conf deleted file mode 100644 index 7c2cfc1ca5..0000000000 --- a/gnu/packages/aux-files/linux-libre/5.7-arm64.conf +++ /dev/null @@ -1,9640 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/arm64 5.7.12-gnu Kernel Configuration -# - -# -# Compiler: gcc (Debian 8.3.0-6) 8.3.0 -# -CONFIG_CC_IS_GCC=y -CONFIG_GCC_VERSION=80300 -CONFIG_LD_VERSION=231010000 -CONFIG_CLANG_VERSION=0 -CONFIG_CC_CAN_LINK=y -CONFIG_CC_HAS_ASM_GOTO=y -CONFIG_CC_HAS_ASM_INLINE=y -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_TABLE_SORT=y -CONFIG_THREAD_INFO_IN_TASK=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_BUILD_SALT="" -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -# CONFIG_USELIB is not set -CONFIG_AUDIT=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_INJECTION=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_IRQ_MSI_IOMMU=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -# CONFIG_GENERIC_IRQ_DEBUGFS is not set -# end of IRQ subsystem - -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -# CONFIG_NO_HZ_FULL is not set -# CONFIG_NO_HZ is not set -CONFIG_HIGH_RES_TIMERS=y -# end of Timers subsystem - -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -CONFIG_SCHED_THERMAL_PRESSURE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_PSI=y -# CONFIG_PSI_DEFAULT_DISABLED is not set -# end of CPU/Task time and stats accounting - -CONFIG_CPU_ISOLATION=y - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -CONFIG_TREE_SRCU=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RCU_NEED_SEGCBLIST=y -# end of RCU Subsystem - -CONFIG_BUILD_BIN2C=y -# CONFIG_IKCONFIG is not set -# CONFIG_IKHEADERS is not set -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 -CONFIG_GENERIC_SCHED_CLOCK=y - -# -# Scheduler features -# -# CONFIG_UCLAMP_TASK is not set -# end of Scheduler features - -CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y -CONFIG_CC_HAS_INT128=y -CONFIG_ARCH_SUPPORTS_INT128=y -CONFIG_NUMA_BALANCING=y -CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y -CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set -CONFIG_MEMCG_KMEM=y -CONFIG_BLK_CGROUP=y -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_CGROUP_PIDS=y -# CONFIG_CGROUP_RDMA is not set -CONFIG_CGROUP_FREEZER=y -# CONFIG_CGROUP_HUGETLB is not set -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_PERF=y -CONFIG_CGROUP_BPF=y -# CONFIG_CGROUP_DEBUG is not set -CONFIG_SOCK_CGROUP_DATA=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -CONFIG_CHECKPOINT_RESTORE=y -CONFIG_SCHED_AUTOGROUP=y -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -CONFIG_BOOT_CONFIG=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_HAVE_UID16=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_BPF=y -CONFIG_EXPERT=y -CONFIG_UID16=y -CONFIG_MULTIUSER=y -# CONFIG_SGETMASK_SYSCALL is not set -# CONFIG_SYSFS_SYSCALL is not set -CONFIG_FHANDLE=y -CONFIG_POSIX_TIMERS=y -CONFIG_PRINTK=y -CONFIG_PRINTK_NMI=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_FUTEX_PI=y -CONFIG_HAVE_FUTEX_CMPXCHG=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_IO_URING=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_MEMBARRIER=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -CONFIG_KALLSYMS_BASE_RELATIVE=y -CONFIG_BPF_LSM=y -CONFIG_BPF_SYSCALL=y -CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y -# CONFIG_BPF_JIT_ALWAYS_ON is not set -CONFIG_BPF_JIT_DEFAULT_ON=y -CONFIG_USERFAULTFD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_RSEQ=y -# CONFIG_DEBUG_RSEQ is not set -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -# CONFIG_PC104 is not set - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# end of Kernel Performance Events And Counters - -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_MEMCG_SYSFS_ON is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_SLAB_MERGE_DEFAULT=y -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SLAB_FREELIST_HARDENED=y -CONFIG_SHUFFLE_PAGE_ALLOCATOR=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SYSTEM_DATA_VERIFICATION=y -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -# end of General setup - -CONFIG_ARM64=y -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_ARM64_PAGE_SHIFT=12 -CONFIG_ARM64_CONT_SHIFT=4 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=33 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ZONE_DMA32=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_SMP=y -CONFIG_KERNEL_MODE_NEON=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_PGTABLE_LEVELS=4 -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_BROKEN_GAS_INST=y - -# -# Platform selection -# -# CONFIG_ARCH_ACTIONS is not set -# CONFIG_ARCH_AGILEX is not set -CONFIG_ARCH_SUNXI=y -# CONFIG_ARCH_ALPINE is not set -CONFIG_ARCH_BCM2835=y -# CONFIG_ARCH_BCM_IPROC is not set -# CONFIG_ARCH_BERLIN is not set -CONFIG_ARCH_BITMAIN=y -# CONFIG_ARCH_BRCMSTB is not set -# CONFIG_ARCH_EXYNOS is not set -# CONFIG_ARCH_K3 is not set -# CONFIG_ARCH_LAYERSCAPE is not set -# CONFIG_ARCH_LG1K is not set -CONFIG_ARCH_HISI=y -# CONFIG_ARCH_MEDIATEK is not set -CONFIG_ARCH_MESON=y -CONFIG_ARCH_MVEBU=y -CONFIG_ARCH_MXC=y -CONFIG_ARCH_QCOM=y -# CONFIG_ARCH_REALTEK is not set -# CONFIG_ARCH_RENESAS is not set -CONFIG_ARCH_ROCKCHIP=y -# CONFIG_ARCH_S32 is not set -CONFIG_ARCH_SEATTLE=y -# CONFIG_ARCH_STRATIX10 is not set -CONFIG_ARCH_SYNQUACER=y -CONFIG_ARCH_TEGRA=y -# CONFIG_ARCH_SPRD is not set -CONFIG_ARCH_THUNDER=y -CONFIG_ARCH_THUNDER2=y -# CONFIG_ARCH_UNIPHIER is not set -CONFIG_ARCH_VEXPRESS=y -CONFIG_ARCH_XGENE=y -# CONFIG_ARCH_ZX is not set -# CONFIG_ARCH_ZYNQMP is not set -# end of Platform selection - -# -# Kernel Features -# - -# -# ARM errata workarounds via the alternatives framework -# -CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y -CONFIG_ARM64_ERRATUM_826319=y -CONFIG_ARM64_ERRATUM_827319=y -CONFIG_ARM64_ERRATUM_824069=y -CONFIG_ARM64_ERRATUM_819472=y -CONFIG_ARM64_ERRATUM_832075=y -CONFIG_ARM64_ERRATUM_834220=y -CONFIG_ARM64_ERRATUM_845719=y -CONFIG_ARM64_ERRATUM_843419=y -CONFIG_ARM64_ERRATUM_1024718=y -CONFIG_ARM64_ERRATUM_1418040=y -CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT_VHE=y -CONFIG_ARM64_ERRATUM_1165522=y -CONFIG_ARM64_ERRATUM_1530923=y -CONFIG_ARM64_ERRATUM_1286807=y -CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT_NVHE=y -CONFIG_ARM64_ERRATUM_1319367=y -CONFIG_ARM64_ERRATUM_1463225=y -CONFIG_ARM64_ERRATUM_1542419=y -CONFIG_CAVIUM_ERRATUM_22375=y -CONFIG_CAVIUM_ERRATUM_23144=y -CONFIG_CAVIUM_ERRATUM_23154=y -CONFIG_CAVIUM_ERRATUM_27456=y -CONFIG_CAVIUM_ERRATUM_30115=y -CONFIG_CAVIUM_TX2_ERRATUM_219=y -CONFIG_QCOM_FALKOR_ERRATUM_1003=y -CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y -CONFIG_QCOM_FALKOR_ERRATUM_1009=y -CONFIG_QCOM_QDF2400_ERRATUM_0065=y -CONFIG_SOCIONEXT_SYNQUACER_PREITS=y -CONFIG_HISILICON_ERRATUM_161600802=y -CONFIG_QCOM_FALKOR_ERRATUM_E1041=y -CONFIG_FUJITSU_ERRATUM_010001=y -# end of ARM errata workarounds via the alternatives framework - -CONFIG_ARM64_4K_PAGES=y -# CONFIG_ARM64_16K_PAGES is not set -# CONFIG_ARM64_64K_PAGES is not set -# CONFIG_ARM64_VA_BITS_39 is not set -CONFIG_ARM64_VA_BITS_48=y -CONFIG_ARM64_VA_BITS=48 -CONFIG_ARM64_PA_BITS_48=y -CONFIG_ARM64_PA_BITS=48 -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SCHED_MC=y -# CONFIG_SCHED_SMT is not set -CONFIG_NR_CPUS=256 -CONFIG_HOTPLUG_CPU=y -CONFIG_NUMA=y -CONFIG_NODES_SHIFT=2 -CONFIG_USE_PERCPU_NUMA_NODE_ID=y -CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y -CONFIG_HOLES_IN_ZONE=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HW_PERF_EVENTS=y -CONFIG_SYS_SUPPORTS_HUGETLBFS=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y -CONFIG_SECCOMP=y -CONFIG_PARAVIRT=y -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -CONFIG_KEXEC=y -CONFIG_KEXEC_FILE=y -# CONFIG_KEXEC_SIG is not set -CONFIG_CRASH_DUMP=y -CONFIG_XEN_DOM0=y -CONFIG_XEN=y -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_UNMAP_KERNEL_AT_EL0=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDEN_EL2_VECTORS=y -CONFIG_ARM64_SSBD=y -CONFIG_RODATA_FULL_DEFAULT_ENABLED=y -# CONFIG_ARM64_SW_TTBR0_PAN is not set -CONFIG_ARM64_TAGGED_ADDR_ABI=y -CONFIG_COMPAT=y -CONFIG_KUSER_HELPERS=y -CONFIG_ARMV8_DEPRECATED=y -CONFIG_SWP_EMULATION=y -CONFIG_CP15_BARRIER_EMULATION=y -CONFIG_SETEND_EMULATION=y - -# -# ARMv8.1 architectural features -# -CONFIG_ARM64_HW_AFDBM=y -CONFIG_ARM64_PAN=y -CONFIG_ARM64_USE_LSE_ATOMICS=y -CONFIG_ARM64_VHE=y -# end of ARMv8.1 architectural features - -# -# ARMv8.2 architectural features -# -CONFIG_ARM64_UAO=y -CONFIG_ARM64_PMEM=y -CONFIG_ARM64_RAS_EXTN=y -CONFIG_ARM64_CNP=y -# end of ARMv8.2 architectural features - -# -# ARMv8.3 architectural features -# -# end of ARMv8.3 architectural features - -# -# ARMv8.4 architectural features -# -CONFIG_ARM64_AMU_EXTN=y -# end of ARMv8.4 architectural features - -# -# ARMv8.5 architectural features -# -CONFIG_ARM64_E0PD=y -CONFIG_ARCH_RANDOM=y -# end of ARMv8.5 architectural features - -CONFIG_ARM64_SVE=y -CONFIG_ARM64_MODULE_PLTS=y -# CONFIG_ARM64_PSEUDO_NMI is not set -CONFIG_RELOCATABLE=y -CONFIG_RANDOMIZE_BASE=y -CONFIG_RANDOMIZE_MODULE_REGION_FULL=y -# end of Kernel Features - -# -# Boot options -# -CONFIG_ARM64_ACPI_PARKING_PROTOCOL=y -CONFIG_CMDLINE="" -CONFIG_EFI_STUB=y -CONFIG_EFI=y -CONFIG_DMI=y -# end of Boot options - -CONFIG_SYSVIPC_COMPAT=y -CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y - -# -# Power management options -# -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SUSPEND_SKIP_SYNC is not set -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="" -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -# CONFIG_PM_WAKELOCKS is not set -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_PM_SLEEP_DEBUG=y -# CONFIG_DPM_WATCHDOG is not set -CONFIG_PM_CLK=y -CONFIG_PM_GENERIC_DOMAINS=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_PM_GENERIC_DOMAINS_SLEEP=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_CPU_PM=y -CONFIG_ENERGY_MODEL=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_HIBERNATION_HEADER=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# end of Power management options - -# -# CPU Power Management -# - -# -# CPU Idle -# -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_GOV_TEO=y -CONFIG_DT_IDLE_STATES=y - -# -# ARM CPU Idle Drivers -# -CONFIG_ARM_CPUIDLE=y -# CONFIG_ARM_PSCI_CPUIDLE is not set -# end of ARM CPU Idle Drivers -# end of CPU Idle - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y - -# -# CPU frequency scaling drivers -# -CONFIG_CPUFREQ_DT=m -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_ACPI_CPPC_CPUFREQ=m -CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m -# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set -# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set -CONFIG_ARM_IMX_CPUFREQ_DT=m -# CONFIG_ARM_QCOM_CPUFREQ_HW is not set -CONFIG_ARM_RASPBERRYPI_CPUFREQ=m -CONFIG_ARM_SCMI_CPUFREQ=m -CONFIG_ARM_TEGRA20_CPUFREQ=y -CONFIG_ARM_TEGRA124_CPUFREQ=y -# CONFIG_ARM_TEGRA186_CPUFREQ is not set -# CONFIG_QORIQ_CPUFREQ is not set -# end of CPU Frequency scaling -# end of CPU Power Management - -# -# Firmware Drivers -# -CONFIG_ARM_SCMI_PROTOCOL=y -CONFIG_ARM_SCMI_POWER_DOMAIN=m -# CONFIG_ARM_SCPI_PROTOCOL is not set -# CONFIG_ARM_SDE_INTERFACE is not set -# CONFIG_FIRMWARE_MEMMAP is not set -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=y -CONFIG_ISCSI_IBFT=m -CONFIG_RASPBERRYPI_FIRMWARE=y -# CONFIG_FW_CFG_SYSFS is not set -CONFIG_QCOM_SCM=y -# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set -# CONFIG_TURRIS_MOX_RWTM is not set -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_ARM_PSCI_FW=y -# CONFIG_ARM_PSCI_CHECKER is not set -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=m -CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=m -# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set -CONFIG_EFI_SOFT_RESERVE=y -CONFIG_EFI_PARAMS_FROM_FDT=y -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_EFI_ARMSTUB=y -CONFIG_EFI_ARMSTUB_DTB_LOADER=y -# CONFIG_EFI_BOOTLOADER_CONTROL is not set -# CONFIG_EFI_CAPSULE_LOADER is not set -# CONFIG_EFI_TEST is not set -# CONFIG_RESET_ATTACK_MITIGATION is not set -# CONFIG_EFI_DISABLE_PCI_DMA is not set -# end of EFI (Extensible Firmware Interface) Support - -CONFIG_EFI_EARLYCON=y -CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y -# CONFIG_IMX_DSP is not set -CONFIG_IMX_SCU=y -CONFIG_IMX_SCU_PD=y -CONFIG_MESON_SM=y - -# -# Tegra firmware driver -# -CONFIG_TEGRA_IVC=y -CONFIG_TEGRA_BPMP=y -# end of Tegra firmware driver -# end of Firmware Drivers - -CONFIG_ARCH_SUPPORTS_ACPI=y -CONFIG_ACPI=y -CONFIG_ACPI_GENERIC_GSI=y -CONFIG_ACPI_CCA_REQUIRED=y -# CONFIG_ACPI_DEBUGGER is not set -CONFIG_ACPI_SPCR_TABLE=y -# CONFIG_ACPI_EC_DEBUGFS is not set -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_FAN=y -CONFIG_ACPI_TAD=m -# CONFIG_ACPI_DOCK is not set -CONFIG_ACPI_PROCESSOR_IDLE=y -CONFIG_ACPI_MCFG=y -CONFIG_ACPI_CPPC_LIB=y -CONFIG_ACPI_PROCESSOR=y -# CONFIG_ACPI_IPMI is not set -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_THERMAL=y -CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y -CONFIG_ACPI_TABLE_UPGRADE=y -# CONFIG_ACPI_DEBUG is not set -# CONFIG_ACPI_PCI_SLOT is not set -CONFIG_ACPI_CONTAINER=y -# CONFIG_ACPI_HED is not set -# CONFIG_ACPI_CUSTOM_METHOD is not set -# CONFIG_ACPI_BGRT is not set -CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y -CONFIG_ACPI_NFIT=y -# CONFIG_NFIT_SECURITY_DEBUG is not set -CONFIG_ACPI_NUMA=y -CONFIG_ACPI_HMAT=y -CONFIG_HAVE_ACPI_APEI=y -# CONFIG_ACPI_APEI is not set -# CONFIG_PMIC_OPREGION is not set -# CONFIG_ACPI_CONFIGFS is not set -CONFIG_ACPI_IORT=y -CONFIG_ACPI_GTDT=y -CONFIG_ACPI_PPTT=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_KVM_IRQ_ROUTING=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_KVM_MMIO=y -CONFIG_HAVE_KVM_MSI=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_KVM_VFIO=y -CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_HAVE_KVM_IRQ_BYPASS=y -CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y -CONFIG_IRQ_BYPASS_MANAGER=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=y -CONFIG_KVM_ARM_HOST=y -CONFIG_KVM_ARM_PMU=y -CONFIG_KVM_INDIRECT_VECTORS=y -CONFIG_ARM64_CRYPTO=y -CONFIG_CRYPTO_SHA256_ARM64=m -# CONFIG_CRYPTO_SHA512_ARM64 is not set -CONFIG_CRYPTO_SHA1_ARM64_CE=m -CONFIG_CRYPTO_SHA2_ARM64_CE=m -# CONFIG_CRYPTO_SHA512_ARM64_CE is not set -# CONFIG_CRYPTO_SHA3_ARM64 is not set -# CONFIG_CRYPTO_SM3_ARM64_CE is not set -# CONFIG_CRYPTO_SM4_ARM64_CE is not set -CONFIG_CRYPTO_GHASH_ARM64_CE=m -# CONFIG_CRYPTO_CRCT10DIF_ARM64_CE is not set -CONFIG_CRYPTO_AES_ARM64=m -CONFIG_CRYPTO_AES_ARM64_CE=m -CONFIG_CRYPTO_AES_ARM64_CE_CCM=m -CONFIG_CRYPTO_AES_ARM64_CE_BLK=m -# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set -CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_CRYPTO_POLY1305_NEON=m -CONFIG_CRYPTO_NHPOLY1305_NEON=m -# CONFIG_CRYPTO_AES_ARM64_BS is not set - -# -# General architecture-dependent options -# -CONFIG_CRASH_CORE=y -CONFIG_KEXEC_CORE=y -CONFIG_KPROBES=y -CONFIG_JUMP_LABEL=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_UPROBES=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_KRETPROBES=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_KEEPINITRD=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SET_DIRECT_MAP=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_HAVE_ASM_MODVERSIONS=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y -CONFIG_MMU_GATHER_TABLE_FREE=y -CONFIG_MMU_GATHER_RCU_TABLE_FREE=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_STACKLEAK=y -CONFIG_HAVE_STACKPROTECTOR=y -CONFIG_CC_HAS_STACKPROTECTOR_NONE=y -CONFIG_STACKPROTECTOR=y -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y -CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 -CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_COMPAT_OLD_SIGACTION=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_HAVE_ARCH_VMAP_STACK=y -CONFIG_VMAP_STACK=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_HAVE_ARCH_COMPILER_H=y -CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y -CONFIG_ARCH_USE_MEMREMAP_PROT=y -# CONFIG_LOCK_EVENT_COUNTS is not set -CONFIG_ARCH_HAS_RELR=y - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# end of GCOV-based kernel profiling - -CONFIG_HAVE_GCC_PLUGINS=y -# end of General architecture-dependent options - -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_ASM_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_TRIM_UNUSED_KSYMS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_RQ_ALLOC_TIME=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_CGROUP_RWSTAT=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_BLK_DEV_INTEGRITY_T10=m -# CONFIG_BLK_DEV_ZONED is not set -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_DEV_THROTTLING_LOW is not set -# CONFIG_BLK_CMDLINE_PARSER is not set -CONFIG_BLK_WBT=y -# CONFIG_BLK_CGROUP_IOLATENCY is not set -CONFIG_BLK_CGROUP_IOCOST=y -CONFIG_BLK_WBT_MQ=y -CONFIG_BLK_DEBUG_FS=y -CONFIG_BLK_SED_OPAL=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_AIX_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -CONFIG_KARMA_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_CMDLINE_PARTITION is not set -# end of Partition Types - -CONFIG_BLOCK_COMPAT=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_MQ_VIRTIO=y -CONFIG_BLK_MQ_RDMA=y -CONFIG_BLK_PM=y - -# -# IO Schedulers -# -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=m -CONFIG_IOSCHED_BFQ=m -CONFIG_BFQ_GROUP_IOSCHED=y -# CONFIG_BFQ_CGROUP_DEBUG is not set -# end of IO Schedulers - -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PADATA=y -CONFIG_ASN1=y -CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y -CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y -CONFIG_ARCH_INLINE_SPIN_LOCK=y -CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y -CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y -CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y -CONFIG_ARCH_INLINE_SPIN_UNLOCK=y -CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y -CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y -CONFIG_ARCH_INLINE_READ_LOCK=y -CONFIG_ARCH_INLINE_READ_LOCK_BH=y -CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y -CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y -CONFIG_ARCH_INLINE_READ_UNLOCK=y -CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y -CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y -CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y -CONFIG_ARCH_INLINE_WRITE_LOCK=y -CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y -CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y -CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y -CONFIG_ARCH_INLINE_WRITE_UNLOCK=y -CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y -CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y -CONFIG_INLINE_SPIN_TRYLOCK=y -CONFIG_INLINE_SPIN_TRYLOCK_BH=y -CONFIG_INLINE_SPIN_LOCK=y -CONFIG_INLINE_SPIN_LOCK_BH=y -CONFIG_INLINE_SPIN_LOCK_IRQ=y -CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y -CONFIG_INLINE_SPIN_UNLOCK_BH=y -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y -CONFIG_INLINE_READ_LOCK=y -CONFIG_INLINE_READ_LOCK_BH=y -CONFIG_INLINE_READ_LOCK_IRQ=y -CONFIG_INLINE_READ_LOCK_IRQSAVE=y -CONFIG_INLINE_READ_UNLOCK=y -CONFIG_INLINE_READ_UNLOCK_BH=y -CONFIG_INLINE_READ_UNLOCK_IRQ=y -CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y -CONFIG_INLINE_WRITE_LOCK=y -CONFIG_INLINE_WRITE_LOCK_BH=y -CONFIG_INLINE_WRITE_LOCK_IRQ=y -CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y -CONFIG_INLINE_WRITE_UNLOCK=y -CONFIG_INLINE_WRITE_UNLOCK_BH=y -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y -CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y -CONFIG_FREEZER=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -CONFIG_COMPAT_BINFMT_ELF=y -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y -# end of Executable file formats - -# -# Memory Management options -# -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_NEED_MULTIPLE_NODES=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_FAST_GUP=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_MEMORY_ISOLATION=y -# CONFIG_MEMORY_HOTPLUG is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_PAGE_REPORTING=y -CONFIG_MIGRATION=y -CONFIG_CONTIG_ALLOC=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_BOUNCE=y -CONFIG_MMU_NOTIFIER=y -CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y -CONFIG_MEMORY_FAILURE=y -CONFIG_HWPOISON_INJECT=m -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y -# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -# CONFIG_CLEANCACHE is not set -CONFIG_FRONTSWAP=y -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -CONFIG_ZSWAP=y -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set -CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set -CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" -CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y -# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set -# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set -CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" -# CONFIG_ZSWAP_DEFAULT_ON is not set -CONFIG_ZPOOL=y -CONFIG_ZBUD=y -# CONFIG_Z3FOLD is not set -CONFIG_ZSMALLOC=m -# CONFIG_PGTABLE_MAPPING is not set -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set -# CONFIG_IDLE_PAGE_TRACKING is not set -CONFIG_ARCH_HAS_PTE_DEVMAP=y -CONFIG_HMM_MIRROR=y -CONFIG_FRAME_VECTOR=y -# CONFIG_PERCPU_STATS is not set -# CONFIG_GUP_BENCHMARK is not set -# CONFIG_READ_ONLY_THP_FOR_FS is not set -CONFIG_ARCH_HAS_PTE_SPECIAL=y -# end of Memory Management options - -CONFIG_NET=y -CONFIG_COMPAT_NETLINK_MESSAGES=y -CONFIG_NET_INGRESS=y -CONFIG_NET_EGRESS=y -CONFIG_NET_REDIRECT=y -CONFIG_SKB_EXTENSIONS=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=m -CONFIG_UNIX=y -CONFIG_UNIX_SCM=y -CONFIG_UNIX_DIAG=m -# CONFIG_TLS is not set -CONFIG_XFRM=y -CONFIG_XFRM_OFFLOAD=y -CONFIG_XFRM_ALGO=m -CONFIG_XFRM_USER=m -CONFIG_XFRM_INTERFACE=m -CONFIG_XFRM_SUB_POLICY=y -CONFIG_XFRM_MIGRATE=y -# CONFIG_XFRM_STATISTICS is not set -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -# CONFIG_SMC is not set -# CONFIG_XDP_SOCKETS is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_FIB_TRIE_STATS=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE_COMMON=y -CONFIG_IP_MROUTE=y -CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_ESP_OFFLOAD=m -# CONFIG_INET_ESPINTCP is not set -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m -# CONFIG_INET_RAW_DIAG is not set -CONFIG_INET_DIAG_DESTROY=y -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_NV=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_CONG_DCTCP=m -CONFIG_TCP_CONG_CDG=m -CONFIG_TCP_CONG_BBR=m -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_ESP_OFFLOAD=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=y -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -CONFIG_IPV6_FOU=m -CONFIG_IPV6_FOU_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y -CONFIG_IPV6_SEG6_LWTUNNEL=y -CONFIG_IPV6_SEG6_HMAC=y -CONFIG_IPV6_SEG6_BPF=y -# CONFIG_IPV6_RPL_LWTUNNEL is not set -# CONFIG_NETLABEL is not set -CONFIG_MPTCP=y -CONFIG_MPTCP_IPV6=y -# CONFIG_MPTCP_HMAC_TEST is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_FAMILY_BRIDGE=y -CONFIG_NETFILTER_FAMILY_ARP=y -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NETFILTER_NETLINK_OSF=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -CONFIG_NF_LOG_NETDEV=m -CONFIG_NETFILTER_CONNCOUNT=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y -CONFIG_NF_CONNTRACK_PROCFS=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -CONFIG_NF_CT_NETLINK_HELPER=m -CONFIG_NETFILTER_NETLINK_GLUE_CT=y -CONFIG_NF_NAT=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=y -CONFIG_NF_NAT_MASQUERADE=y -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_INET=y -CONFIG_NF_TABLES_NETDEV=y -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -# CONFIG_NFT_FLOW_OFFLOAD is not set -CONFIG_NFT_COUNTER=m -CONFIG_NFT_CONNLIMIT=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_TUNNEL=m -CONFIG_NFT_OBJREF=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NFT_FIB=m -CONFIG_NFT_FIB_INET=m -CONFIG_NFT_XFRM=m -CONFIG_NFT_SOCKET=m -CONFIG_NFT_OSF=m -CONFIG_NFT_TPROXY=m -CONFIG_NFT_SYNPROXY=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -CONFIG_NFT_FIB_NETDEV=m -CONFIG_NF_FLOW_TABLE_INET=m -CONFIG_NF_FLOW_TABLE=m -CONFIG_NETFILTER_XTABLES=m - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -CONFIG_NETFILTER_XT_TARGET_AUDIT=m -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -# end of Core Netfilter Configuration - -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -CONFIG_IP_SET_HASH_IPMAC=m -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_MH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS MH scheduler -# -CONFIG_IP_VS_MH_TAB_INDEX=12 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_SOCKET_IPV4=m -CONFIG_NF_TPROXY_IPV4=m -CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NFT_FIB_IPV4=m -CONFIG_NF_TABLES_ARP=y -CONFIG_NF_FLOW_TABLE_IPV4=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -# end of IP: Netfilter Configuration - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_SOCKET_IPV6=m -CONFIG_NF_TPROXY_IPV6=m -CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NFT_FIB_IPV6=m -CONFIG_NF_FLOW_TABLE_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_SRH=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m -# end of IPv6: Netfilter Configuration - -CONFIG_NF_DEFRAG_IPV6=m -CONFIG_NF_TABLES_BRIDGE=m -CONFIG_NFT_BRIDGE_META=m -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_NF_CONNTRACK_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -# CONFIG_BPFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=y -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_TFRC_LIB=y -# end of DCCP CCIDs Configuration - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# end of DCCP Kernel Hacking - -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_INET_SCTP_DIAG=m -CONFIG_RDS=m -CONFIG_RDS_RDMA=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set -CONFIG_TIPC=m -CONFIG_TIPC_MEDIA_IB=y -CONFIG_TIPC_MEDIA_UDP=y -CONFIG_TIPC_CRYPTO=y -CONFIG_TIPC_DIAG=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_MRP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y -CONFIG_NET_DSA=m -CONFIG_NET_DSA_TAG_8021Q=m -CONFIG_NET_DSA_TAG_AR9331=m -CONFIG_NET_DSA_TAG_BRCM_COMMON=m -CONFIG_NET_DSA_TAG_BRCM=m -CONFIG_NET_DSA_TAG_BRCM_PREPEND=m -CONFIG_NET_DSA_TAG_GSWIP=m -CONFIG_NET_DSA_TAG_DSA=m -CONFIG_NET_DSA_TAG_EDSA=m -CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_OCELOT=m -CONFIG_NET_DSA_TAG_QCA=m -CONFIG_NET_DSA_TAG_LAN9303=m -CONFIG_NET_DSA_TAG_SJA1105=m -CONFIG_NET_DSA_TAG_TRAILER=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -CONFIG_PHONET=m -CONFIG_6LOWPAN=m -# CONFIG_6LOWPAN_DEBUGFS is not set -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m -CONFIG_6LOWPAN_GHC_UDP=m -CONFIG_6LOWPAN_GHC_ICMPV6=m -CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m -CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m -CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m -CONFIG_IEEE802154=m -# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -# CONFIG_NET_SCH_CBS is not set -CONFIG_NET_SCH_ETF=m -CONFIG_NET_SCH_TAPRIO=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_SKBPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_CAKE=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_FQ_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -CONFIG_NET_SCH_ETS=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_CLS_MATCHALL=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_EMATCH_CANID=m -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_EMATCH_IPT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_SAMPLE=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_MPLS=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -CONFIG_NET_ACT_CTINFO=m -CONFIG_NET_ACT_SKBMOD=m -CONFIG_NET_ACT_IFE=m -CONFIG_NET_ACT_TUNNEL_KEY=m -CONFIG_NET_ACT_CT=m -CONFIG_NET_IFE_SKBMARK=m -CONFIG_NET_IFE_SKBPRIO=m -CONFIG_NET_IFE_SKBTCINDEX=m -# CONFIG_NET_TC_SKB_EXT is not set -CONFIG_NET_SCH_FIFO=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=m -CONFIG_BATMAN_ADV=m -# CONFIG_BATMAN_ADV_BATMAN_V is not set -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -CONFIG_BATMAN_ADV_DEBUGFS=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_BATMAN_ADV_SYSFS=y -# CONFIG_BATMAN_ADV_TRACING is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_OPENVSWITCH_GENEVE=m -CONFIG_VSOCKETS=m -CONFIG_VSOCKETS_DIAG=m -CONFIG_VSOCKETS_LOOPBACK=m -CONFIG_VIRTIO_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS_COMMON=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=y -CONFIG_MPLS_ROUTING=m -CONFIG_MPLS_IPTUNNEL=m -CONFIG_NET_NSH=m -# CONFIG_HSR is not set -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_L3_MASTER_DEV=y -# CONFIG_QRTR is not set -# CONFIG_NET_NCSI is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -CONFIG_BPF_JIT=y -# CONFIG_BPF_STREAM_PARSER is not set -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -CONFIG_NET_DROP_MONITOR=y -# end of Network testing -# end of Networking options - -# CONFIG_HAMRADIO is not set -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m -CONFIG_CAN_J1939=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -# CONFIG_CAN_VXCAN is not set -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -CONFIG_CAN_FLEXCAN=m -# CONFIG_CAN_GRCAN is not set -CONFIG_CAN_KVASER_PCIEFD=m -# CONFIG_CAN_XILINXCAN is not set -# CONFIG_CAN_C_CAN is not set -# CONFIG_CAN_CC770 is not set -# CONFIG_CAN_IFI_CANFD is not set -# CONFIG_CAN_M_CAN is not set -# CONFIG_CAN_PEAK_PCIEFD is not set -CONFIG_CAN_SJA1000=m -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_F81601=m -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_PLX_PCI=m -CONFIG_CAN_SJA1000_ISA=m -# CONFIG_CAN_SJA1000_PLATFORM is not set -CONFIG_CAN_SOFTING=m - -# -# CAN SPI interfaces -# -# CONFIG_CAN_HI311X is not set -# CONFIG_CAN_MCP251X is not set -# end of CAN SPI interfaces - -# -# CAN USB interfaces -# -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -# CONFIG_CAN_MCBA_USB is not set -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_UCAN=m -# end of CAN USB interfaces - -# CONFIG_CAN_DEBUG_DEVICES is not set -# end of CAN Device Drivers - -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -CONFIG_BT_6LOWPAN=m -CONFIG_BT_LEDS=y -# CONFIG_BT_SELFTEST is not set -CONFIG_BT_DEBUGFS=y - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_QCA=m -CONFIG_BT_HCIBTUSB=m -# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_MTK=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_SERDEV=y -CONFIG_BT_HCIUART_H4=y -# CONFIG_BT_HCIUART_NOKIA is not set -# CONFIG_BT_HCIUART_BCSP is not set -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIUART_3WIRE=y -CONFIG_BT_HCIUART_INTEL=y -CONFIG_BT_HCIUART_RTL=y -CONFIG_BT_HCIUART_QCA=y -CONFIG_BT_HCIUART_AG6XX=y -CONFIG_BT_HCIUART_MRVL=y -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_BT_ATH3K=m -CONFIG_BT_MTKSDIO=m -CONFIG_BT_MTKUART=m -CONFIG_BT_QCOMSMD=m -CONFIG_BT_HCIRSI=m -# end of Bluetooth device drivers - -CONFIG_AF_RXRPC=m -CONFIG_AF_RXRPC_IPV6=y -# CONFIG_AF_RXRPC_INJECT_LOSS is not set -# CONFIG_AF_RXRPC_DEBUG is not set -CONFIG_RXKAD=y -# CONFIG_AF_KCM is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y -CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y -CONFIG_CFG80211_DEFAULT_PS=y -# CONFIG_CFG80211_DEBUGFS is not set -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_CFG80211_WEXT_EXPORT=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=m -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -# CONFIG_RFKILL_GPIO is not set -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -# CONFIG_NET_9P_XEN is not set -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set -# CONFIG_CAIF is not set -CONFIG_CEPH_LIB=m -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set -# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -# CONFIG_NFC_NCI is not set -# CONFIG_NFC_HCI is not set - -# -# Near Field Communication (NFC) devices -# -# CONFIG_NFC_TRF7970A is not set -CONFIG_NFC_SIM=m -CONFIG_NFC_PORT100=m -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -# CONFIG_NFC_PN533_I2C is not set -# CONFIG_NFC_PN532_UART is not set -# CONFIG_NFC_ST95HF is not set -# end of Near Field Communication (NFC) devices - -CONFIG_PSAMPLE=m -CONFIG_NET_IFE=m -CONFIG_LWTUNNEL=y -CONFIG_LWTUNNEL_BPF=y -CONFIG_DST_CACHE=y -CONFIG_GRO_CELLS=y -CONFIG_NET_DEVLINK=y -CONFIG_PAGE_POOL=y -CONFIG_FAILOVER=m -CONFIG_ETHTOOL_NETLINK=y -CONFIG_HAVE_EBPF_JIT=y - -# -# Device Drivers -# -CONFIG_ARM_AMBA=y -CONFIG_TEGRA_AHB=y -CONFIG_HAVE_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_SYSCALL=y -CONFIG_PCIEPORTBUS=y -CONFIG_HOTPLUG_PCI_PCIE=y -CONFIG_PCIEAER=y -CONFIG_PCIEAER_INJECT=m -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEASPM=y -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCIE_DPC=y -CONFIG_PCIE_PTM=y -# CONFIG_PCIE_BW is not set -# CONFIG_PCIE_EDR is not set -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_REALLOC_ENABLE_AUTO=y -CONFIG_PCI_STUB=m -# CONFIG_PCI_PF_STUB is not set -CONFIG_PCI_ATS=y -CONFIG_PCI_ECAM=y -CONFIG_PCI_BRIDGE_EMUL=y -CONFIG_PCI_IOV=y -# CONFIG_PCI_PRI is not set -# CONFIG_PCI_PASID is not set -CONFIG_PCI_LABEL=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_HOTPLUG_PCI_ACPI_IBM=m -CONFIG_HOTPLUG_PCI_CPCI=y -CONFIG_HOTPLUG_PCI_SHPC=y - -# -# PCI controller drivers -# -CONFIG_PCI_AARDVARK=y -# CONFIG_PCI_FTPCI100 is not set -CONFIG_PCI_TEGRA=y -CONFIG_PCI_HOST_COMMON=y -CONFIG_PCI_HOST_GENERIC=y -# CONFIG_PCIE_XILINX is not set -CONFIG_PCI_XGENE=y -CONFIG_PCI_XGENE_MSI=y -# CONFIG_PCIE_ALTERA is not set -CONFIG_PCI_HOST_THUNDER_PEM=y -CONFIG_PCI_HOST_THUNDER_ECAM=y -CONFIG_PCIE_ROCKCHIP=y -CONFIG_PCIE_ROCKCHIP_HOST=m -CONFIG_PCIE_BRCMSTB=m - -# -# DesignWare PCI Core Support -# -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -# CONFIG_PCIE_DW_PLAT_HOST is not set -CONFIG_PCI_IMX6=y -CONFIG_PCI_HISI=y -CONFIG_PCIE_QCOM=y -CONFIG_PCIE_ARMADA_8K=y -CONFIG_PCIE_KIRIN=y -# CONFIG_PCIE_HISI_STB is not set -# CONFIG_PCI_MESON is not set -CONFIG_PCIE_TEGRA194=m -CONFIG_PCIE_TEGRA194_HOST=m -# CONFIG_PCIE_AL is not set -# end of DesignWare PCI Core Support - -# -# Mobiveil PCIe Core Support -# -# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set -# end of Mobiveil PCIe Core Support - -# -# Cadence PCIe controllers support -# -# CONFIG_PCIE_CADENCE_PLAT_HOST is not set -# end of Cadence PCIe controllers support -# end of PCI controller drivers - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set -# end of PCI Endpoint - -# -# PCI switch controller drivers -# -# CONFIG_PCI_SW_SWITCHTEC is not set -# end of PCI switch controller drivers - -# CONFIG_PCCARD is not set -# CONFIG_RAPIDIO is not set - -# -# Generic Driver Options -# -# CONFIG_UEVENT_HELPER is not set -CONFIG_DEVTMPFS=y -# CONFIG_DEVTMPFS_MOUNT is not set -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y - -# -# Firmware loader -# -CONFIG_FW_LOADER=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_FW_LOADER_COMPRESS=y -CONFIG_FW_CACHE=y -# end of Firmware loader - -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set -CONFIG_HMEM_REPORTING=y -# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set -CONFIG_SYS_HYPERVISOR=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_SOC_BUS=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=m -CONFIG_REGMAP_SPMI=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_REGMAP_SCCB=m -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set -CONFIG_GENERIC_ARCH_TOPOLOGY=y -# end of Generic Driver Options - -# -# Bus devices -# -# CONFIG_BRCMSTB_GISB_ARB is not set -CONFIG_MOXTET=m -# CONFIG_HISILICON_LPC is not set -# CONFIG_IMX_WEIM is not set -CONFIG_QCOM_EBI2=y -# CONFIG_SIMPLE_PM_BUS is not set -CONFIG_SUN50I_DE2_BUS=y -CONFIG_SUNXI_RSB=y -CONFIG_TEGRA_ACONNECT=y -# CONFIG_TEGRA_GMI is not set -CONFIG_VEXPRESS_CONFIG=y -# CONFIG_FSL_MC_BUS is not set -CONFIG_MHI_BUS=m -# end of Bus devices - -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_GNSS=m -CONFIG_GNSS_SERIAL=m -CONFIG_GNSS_MTK_SERIAL=m -CONFIG_GNSS_SIRF_SERIAL=m -CONFIG_GNSS_UBX_SERIAL=m -CONFIG_MTD=m -# CONFIG_MTD_TESTS is not set - -# -# Partition parsers -# -CONFIG_MTD_AR7_PARTS=m -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_OF_PARTS=m -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# end of Partition parsers - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -# CONFIG_SM_FTL is not set -CONFIG_MTD_OOPS=m -CONFIG_MTD_SWAP=m -# CONFIG_MTD_PARTITIONED_MASTER is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# end of RAM/ROM/Flash chip drivers - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_PCI=m -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m -# end of Mapping drivers for chip access - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -CONFIG_MTD_DATAFLASH=m -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -# CONFIG_MTD_DATAFLASH_OTP is not set -# CONFIG_MTD_MCHP23K256 is not set -CONFIG_MTD_SST25L=m -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOCG3 is not set -# end of Self-contained MTD device drivers - -CONFIG_MTD_NAND_CORE=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -# CONFIG_MTD_ONENAND_GENERIC is not set -# CONFIG_MTD_ONENAND_OTP is not set -CONFIG_MTD_ONENAND_2X_PROGRAM=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=m -# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set -CONFIG_MTD_RAW_NAND=m -# CONFIG_MTD_NAND_ECC_SW_BCH is not set - -# -# Raw/parallel NAND flash controllers -# -CONFIG_MTD_NAND_DENALI=m -# CONFIG_MTD_NAND_DENALI_PCI is not set -CONFIG_MTD_NAND_DENALI_DT=m -# CONFIG_MTD_NAND_CAFE is not set -CONFIG_MTD_NAND_MARVELL=m -CONFIG_MTD_NAND_BRCMNAND=m -CONFIG_MTD_NAND_MXC=m -CONFIG_MTD_NAND_SUNXI=m -CONFIG_MTD_NAND_HISI504=m -CONFIG_MTD_NAND_QCOM=m -CONFIG_MTD_NAND_MXIC=m -CONFIG_MTD_NAND_TEGRA=m -CONFIG_MTD_NAND_MESON=m -CONFIG_MTD_NAND_GPIO=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_NAND_CADENCE=m - -# -# Misc -# -CONFIG_MTD_SM_COMMON=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_RICOH=m -CONFIG_MTD_NAND_DISKONCHIP=m -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set -CONFIG_MTD_SPI_NAND=m - -# -# LPDDR & LPDDR2 PCM memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m -# end of LPDDR & LPDDR2 PCM memory drivers - -CONFIG_MTD_SPI_NOR=m -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -# CONFIG_SPI_CADENCE_QUADSPI is not set -CONFIG_SPI_HISI_SFC=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_HYPERBUS=m -CONFIG_HBMC_AM654=m -CONFIG_DTC=y -CONFIG_OF=y -# CONFIG_OF_UNITTEST is not set -CONFIG_OF_FLATTREE=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_KOBJ=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_IRQ=y -CONFIG_OF_NET=y -CONFIG_OF_MDIO=m -CONFIG_OF_RESERVED_MEM=y -# CONFIG_OF_OVERLAY is not set -CONFIG_OF_NUMA=y -CONFIG_PARPORT=m -# CONFIG_PARPORT_AX88796 is not set -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_PNP=y -# CONFIG_PNP_DEBUG_MESSAGES is not set - -# -# Protocols -# -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_NULL_BLK=m -CONFIG_CDROM=m -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m -CONFIG_ZRAM=m -# CONFIG_ZRAM_WRITEBACK is not set -# CONFIG_ZRAM_MEMORY_TRACKING is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SKD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=m -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m -CONFIG_XEN_BLKDEV_FRONTEND=m -CONFIG_XEN_BLKDEV_BACKEND=m -CONFIG_VIRTIO_BLK=m -CONFIG_BLK_DEV_RBD=m -# CONFIG_BLK_DEV_RSXX is not set - -# -# NVME Support -# -CONFIG_NVME_CORE=m -CONFIG_BLK_DEV_NVME=m -CONFIG_NVME_MULTIPATH=y -CONFIG_NVME_HWMON=y -CONFIG_NVME_FABRICS=m -CONFIG_NVME_RDMA=m -CONFIG_NVME_FC=m -CONFIG_NVME_TCP=m -CONFIG_NVME_TARGET=m -# CONFIG_NVME_TARGET_LOOP is not set -CONFIG_NVME_TARGET_RDMA=m -CONFIG_NVME_TARGET_FC=m -# CONFIG_NVME_TARGET_FCLOOP is not set -CONFIG_NVME_TARGET_TCP=m -# end of NVME Support - -# -# Misc devices -# -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_AD525X_DPOT=m -CONFIG_AD525X_DPOT_I2C=m -CONFIG_AD525X_DPOT_SPI=m -# CONFIG_DUMMY_IRQ is not set -# CONFIG_PHANTOM is not set -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -# CONFIG_HP_ILO is not set -CONFIG_QCOM_COINCELL=m -# CONFIG_QCOM_FASTRPC is not set -CONFIG_APDS9802ALS=m -CONFIG_ISL29003=m -CONFIG_ISL29020=m -CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1770=m -CONFIG_SENSORS_APDS990X=m -CONFIG_HMC6352=m -CONFIG_DS1682=m -# CONFIG_LATTICE_ECP3_CONFIG is not set -CONFIG_SRAM=y -CONFIG_VEXPRESS_SYSCFG=y -# CONFIG_PCI_ENDPOINT_TEST is not set -CONFIG_XILINX_SDFEC=m -CONFIG_MISC_RTSX=m -CONFIG_PVPANIC=m -CONFIG_C2PORT=m - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_MAX6875=m -CONFIG_EEPROM_93CX6=m -# CONFIG_EEPROM_93XX46 is not set -# CONFIG_EEPROM_IDT_89HPESX is not set -# CONFIG_EEPROM_EE1004 is not set -# end of EEPROM support - -CONFIG_CB710_CORE=m -# CONFIG_CB710_DEBUG is not set -CONFIG_CB710_DEBUG_ASSUMPTIONS=y - -# -# Texas Instruments shared transport line discipline -# -CONFIG_TI_ST=m -# end of Texas Instruments shared transport line discipline - -CONFIG_SENSORS_LIS3_I2C=m -CONFIG_ALTERA_STAPL=m - -# -# Intel MIC & related support -# -# CONFIG_VOP_BUS is not set -# end of Intel MIC & related support - -# CONFIG_GENWQE is not set -# CONFIG_ECHO is not set -CONFIG_MISC_ALCOR_PCI=m -CONFIG_MISC_RTSX_PCI=m -CONFIG_MISC_RTSX_USB=m -CONFIG_HABANA_AI=m -CONFIG_UACCE=m -# end of Misc devices - -# -# SCSI device support -# -CONFIG_SCSI_MOD=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SRP_ATTRS=m -# end of SCSI Transports - -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_SCSI_CXGB4_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2X_FCOE=m -CONFIG_BE2ISCSI=m -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_HPSA=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_3W_SAS=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -CONFIG_AIC79XX_DEBUG_ENABLE=y -CONFIG_AIC79XX_DEBUG_MASK=0 -CONFIG_AIC79XX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_SCSI_HISI_SAS=m -CONFIG_SCSI_HISI_SAS_PCI=m -CONFIG_SCSI_MVSAS=m -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVSAS_TASKLET is not set -CONFIG_SCSI_MVUMI=m -CONFIG_SCSI_ADVANSYS=m -# CONFIG_SCSI_ARCMSR is not set -CONFIG_SCSI_ESAS2R=m -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -CONFIG_SCSI_MPT2SAS=m -CONFIG_SCSI_SMARTPQI=m -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PCI=m -# CONFIG_SCSI_UFS_DWC_TC_PCI is not set -# CONFIG_SCSI_UFSHCD_PLATFORM is not set -# CONFIG_SCSI_UFS_BSG is not set -CONFIG_SCSI_HPTIOP=m -# CONFIG_SCSI_MYRB is not set -# CONFIG_SCSI_MYRS is not set -CONFIG_XEN_SCSI_FRONTEND=m -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -CONFIG_FCOE=m -CONFIG_SCSI_SNIC=m -# CONFIG_SCSI_SNIC_DEBUG_FS is not set -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_FDOMAIN=m -CONFIG_SCSI_FDOMAIN_PCI=m -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -CONFIG_SCSI_STEX=m -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA_FC=m -CONFIG_TCM_QLA2XXX=m -# CONFIG_TCM_QLA2XXX_DEBUG is not set -CONFIG_SCSI_QLA_ISCSI=m -# CONFIG_QEDI is not set -# CONFIG_QEDF is not set -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_AM53C974 is not set -CONFIG_SCSI_WD719X=m -# CONFIG_SCSI_DEBUG is not set -CONFIG_SCSI_PMCRAID=m -CONFIG_SCSI_PM8001=m -CONFIG_SCSI_BFA_FC=m -CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_CHELSIO_FCOE=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -# end of SCSI device support - -CONFIG_HAVE_PATA_PLATFORM=y -CONFIG_ATA=m -CONFIG_SATA_HOST=y -CONFIG_PATA_TIMINGS=y -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_ATA_FORCE=y -CONFIG_ATA_ACPI=y -CONFIG_SATA_ZPODD=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -CONFIG_SATA_AHCI=m -CONFIG_SATA_MOBILE_LPM_POLICY=0 -CONFIG_SATA_AHCI_PLATFORM=m -CONFIG_AHCI_IMX=m -# CONFIG_AHCI_CEVA is not set -CONFIG_AHCI_MVEBU=m -# CONFIG_AHCI_SUNXI is not set -CONFIG_AHCI_TEGRA=m -CONFIG_AHCI_XGENE=m -# CONFIG_AHCI_QORIQ is not set -CONFIG_SATA_AHCI_SEATTLE=m -# CONFIG_SATA_INIC162X is not set -CONFIG_SATA_ACARD_AHCI=m -CONFIG_SATA_SIL24=m -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -CONFIG_PDC_ADMA=m -CONFIG_SATA_QSTOR=m -CONFIG_SATA_SX4=m -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=m -# CONFIG_SATA_DWC is not set -CONFIG_SATA_MV=m -CONFIG_SATA_NV=m -CONFIG_SATA_PROMISE=m -CONFIG_SATA_SIL=m -CONFIG_SATA_SIS=m -CONFIG_SATA_SVW=m -CONFIG_SATA_ULI=m -CONFIG_SATA_VIA=m -CONFIG_SATA_VITESSE=m - -# -# PATA SFF controllers with BMDMA -# -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -CONFIG_PATA_ARTOP=m -# CONFIG_PATA_ATIIXP is not set -CONFIG_PATA_ATP867X=m -CONFIG_PATA_CMD64X=m -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IMX is not set -CONFIG_PATA_IT8213=m -CONFIG_PATA_IT821X=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_MARVELL=m -# CONFIG_PATA_NETCELL is not set -CONFIG_PATA_NINJA32=m -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -CONFIG_PATA_RDC=m -CONFIG_PATA_SCH=m -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_SIL680 is not set -CONFIG_PATA_SIS=m -CONFIG_PATA_TOSHIBA=m -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set - -# -# PIO-only SFF controllers -# -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_RZ1000 is not set - -# -# Generic fallback / legacy drivers -# -# CONFIG_PATA_ACPI is not set -CONFIG_ATA_GENERIC=m -# CONFIG_PATA_LEGACY is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -# CONFIG_MD_CLUSTER is not set -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -# CONFIG_DM_UNSTRIPED is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -CONFIG_DM_WRITECACHE=m -CONFIG_DM_ERA=m -CONFIG_DM_CLONE=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_DUST=m -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -# CONFIG_DM_INTEGRITY is not set -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_TCM_USER2=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_TCM_FC=m -CONFIG_ISCSI_TARGET=m -CONFIG_ISCSI_TARGET_CXGB4=m -CONFIG_SBP_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -# CONFIG_FUSION_LOGGING is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_FIREWIRE=m -CONFIG_FIREWIRE_OHCI=m -CONFIG_FIREWIRE_SBP2=m -CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_NOSY=m -# end of IEEE 1394 (FireWire) support - -CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_WIREGUARD=m -# CONFIG_WIREGUARD_DEBUG is not set -CONFIG_EQUALIZER=m -# CONFIG_NET_FC is not set -CONFIG_IFB=m -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN_L3S=y -CONFIG_IPVLAN=m -CONFIG_IPVTAP=m -CONFIG_VXLAN=m -CONFIG_GENEVE=m -CONFIG_BAREUDP=m -CONFIG_GTP=m -CONFIG_MACSEC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_TUN=m -CONFIG_TAP=m -# CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m -CONFIG_VIRTIO_NET=m -CONFIG_NLMON=m -CONFIG_NET_VRF=m -# CONFIG_VSOCKMON is not set -# CONFIG_ARCNET is not set -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -CONFIG_ATM_NICSTAR=m -CONFIG_ATM_NICSTAR_USE_SUNI=y -CONFIG_ATM_NICSTAR_USE_IDT77105=y -# CONFIG_ATM_IDT77252 is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -# CONFIG_ATM_FORE200E_USE_TASKLET is not set -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -# CONFIG_ATM_HE is not set -CONFIG_ATM_SOLOS=m - -# -# Distributed Switch Architecture drivers -# -# CONFIG_B53 is not set -# CONFIG_NET_DSA_BCM_SF2 is not set -# CONFIG_NET_DSA_LOOP is not set -# CONFIG_NET_DSA_LANTIQ_GSWIP is not set -# CONFIG_NET_DSA_MT7530 is not set -CONFIG_NET_DSA_MV88E6060=m -# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set -# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -# CONFIG_NET_DSA_MV88E6XXX_PTP is not set -CONFIG_NET_DSA_MSCC_FELIX=m -CONFIG_NET_DSA_AR9331=m -CONFIG_NET_DSA_SJA1105=m -CONFIG_NET_DSA_SJA1105_PTP=y -# CONFIG_NET_DSA_SJA1105_TAS is not set -# CONFIG_NET_DSA_QCA8K is not set -CONFIG_NET_DSA_REALTEK_SMI=m -# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set -# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set -CONFIG_NET_DSA_VITESSE_VSC73XX=m -CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m -CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m -# end of Distributed Switch Architecture drivers - -CONFIG_ETHERNET=y -CONFIG_MDIO=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_NET_VENDOR_AGERE=y -CONFIG_ET131X=m -CONFIG_NET_VENDOR_ALACRITECH=y -# CONFIG_SLICOSS is not set -CONFIG_NET_VENDOR_ALLWINNER=y -# CONFIG_SUN4I_EMAC is not set -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -# CONFIG_ALTERA_TSE is not set -CONFIG_NET_VENDOR_AMAZON=y -CONFIG_ENA_ETHERNET=m -CONFIG_NET_VENDOR_AMD=y -# CONFIG_AMD8111_ETH is not set -CONFIG_PCNET32=m -CONFIG_AMD_XGBE=m -# CONFIG_AMD_XGBE_DCB is not set -CONFIG_NET_XGENE=m -CONFIG_NET_XGENE_V2=m -CONFIG_NET_VENDOR_AQUANTIA=y -CONFIG_AQTION=m -# CONFIG_NET_VENDOR_ARC is not set -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_ATL2=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_ALX=m -# CONFIG_NET_VENDOR_AURORA is not set -CONFIG_NET_VENDOR_BROADCOM=y -# CONFIG_B44 is not set -# CONFIG_BCMGENET is not set -CONFIG_BNX2=m -CONFIG_CNIC=m -CONFIG_TIGON3=m -CONFIG_TIGON3_HWMON=y -CONFIG_BNX2X=m -CONFIG_BNX2X_SRIOV=y -# CONFIG_SYSTEMPORT is not set -CONFIG_BNXT=m -CONFIG_BNXT_SRIOV=y -CONFIG_BNXT_FLOWER_OFFLOAD=y -# CONFIG_BNXT_DCB is not set -CONFIG_BNXT_HWMON=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_BNA=m -CONFIG_NET_VENDOR_CADENCE=y -# CONFIG_MACB is not set -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_THUNDER_NIC_PF=m -CONFIG_THUNDER_NIC_VF=m -CONFIG_THUNDER_NIC_BGX=m -CONFIG_THUNDER_NIC_RGX=m -CONFIG_CAVIUM_PTP=y -CONFIG_LIQUIDIO=m -# CONFIG_LIQUIDIO_VF is not set -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m -CONFIG_CHELSIO_T4_DCB=y -CONFIG_CHELSIO_T4_FCOE=y -CONFIG_CHELSIO_T4VF=m -CONFIG_CHELSIO_LIB=m -CONFIG_NET_VENDOR_CISCO=y -CONFIG_ENIC=m -CONFIG_NET_VENDOR_CORTINA=y -# CONFIG_GEMINI_ETHERNET is not set -# CONFIG_DNET is not set -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_DE2104X_DSL=0 -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_TULIP_NAPI=y -CONFIG_TULIP_NAPI_HW_MITIGATION=y -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_NET_VENDOR_DLINK=y -CONFIG_DL2K=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_BE2NET=m -CONFIG_BE2NET_HWMON=y -CONFIG_BE2NET_BE2=y -CONFIG_BE2NET_BE3=y -CONFIG_BE2NET_LANCER=y -CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_EZCHIP=y -# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_FEC=m -CONFIG_FSL_PQ_MDIO=m -CONFIG_FSL_XGMAC_MDIO=m -CONFIG_GIANFAR=m -CONFIG_FSL_ENETC=m -CONFIG_FSL_ENETC_VF=m -CONFIG_FSL_ENETC_MDIO=m -CONFIG_FSL_ENETC_PTP_CLOCK=m -CONFIG_FSL_ENETC_QOS=y -CONFIG_NET_VENDOR_GOOGLE=y -CONFIG_GVE=m -CONFIG_NET_VENDOR_HISILICON=y -CONFIG_HIX5HD2_GMAC=m -CONFIG_HISI_FEMAC=m -CONFIG_HIP04_ETH=m -CONFIG_HI13X1_GMAC=y -CONFIG_HNS_MDIO=m -CONFIG_HNS=m -CONFIG_HNS_DSAF=m -CONFIG_HNS_ENET=m -# CONFIG_HNS3 is not set -CONFIG_NET_VENDOR_HUAWEI=y -CONFIG_HINIC=m -CONFIG_NET_VENDOR_I825XX=y -CONFIG_NET_VENDOR_INTEL=y -CONFIG_E100=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_IGB=m -CONFIG_IGB_HWMON=y -CONFIG_IGBVF=m -CONFIG_IXGB=m -CONFIG_IXGBE=m -CONFIG_IXGBE_HWMON=y -CONFIG_IXGBE_DCB=y -CONFIG_IXGBE_IPSEC=y -CONFIG_IXGBEVF=m -CONFIG_IXGBEVF_IPSEC=y -CONFIG_I40E=m -CONFIG_I40E_DCB=y -# CONFIG_I40EVF is not set -# CONFIG_ICE is not set -# CONFIG_FM10K is not set -# CONFIG_IGC is not set -CONFIG_JME=m -CONFIG_NET_VENDOR_MARVELL=y -CONFIG_MVMDIO=m -CONFIG_MVNETA=m -CONFIG_MVPP2=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKGE_GENESIS=y -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -CONFIG_OCTEONTX2_MBOX=m -# CONFIG_OCTEONTX2_AF is not set -CONFIG_OCTEONTX2_PF=m -CONFIG_OCTEONTX2_VF=m -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_DCB=y -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX4_CORE_GEN2=y -CONFIG_MLX5_CORE=m -# CONFIG_MLX5_FPGA is not set -CONFIG_MLX5_CORE_EN=y -CONFIG_MLX5_EN_ARFS=y -CONFIG_MLX5_EN_RXNFC=y -CONFIG_MLX5_MPFS=y -CONFIG_MLX5_ESWITCH=y -CONFIG_MLX5_CORE_EN_DCB=y -# CONFIG_MLX5_CORE_IPOIB is not set -CONFIG_MLX5_SW_STEERING=y -# CONFIG_MLXSW_CORE is not set -# CONFIG_MLXFW is not set -CONFIG_NET_VENDOR_MICREL=y -# CONFIG_KS8842 is not set -# CONFIG_KS8851 is not set -# CONFIG_KS8851_MLL is not set -CONFIG_KSZ884X_PCI=m -CONFIG_NET_VENDOR_MICROCHIP=y -# CONFIG_ENC28J60 is not set -# CONFIG_ENCX24J600 is not set -# CONFIG_LAN743X is not set -CONFIG_NET_VENDOR_MICROSEMI=y -CONFIG_MSCC_OCELOT_SWITCH=m -CONFIG_MSCC_OCELOT_SWITCH_OCELOT=m -CONFIG_NET_VENDOR_MYRI=y -CONFIG_MYRI10GE=m -CONFIG_FEALNX=m -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NATSEMI=m -CONFIG_NS83820=m -CONFIG_NET_VENDOR_NETERION=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set -CONFIG_NET_VENDOR_NETRONOME=y -CONFIG_NFP=m -CONFIG_NFP_APP_FLOWER=y -CONFIG_NFP_APP_ABM_NIC=y -# CONFIG_NFP_DEBUG is not set -CONFIG_NET_VENDOR_NI=y -# CONFIG_NI_XGE_MANAGEMENT_ENET is not set -CONFIG_NET_VENDOR_8390=y -CONFIG_NE2K_PCI=m -CONFIG_NET_VENDOR_NVIDIA=y -# CONFIG_FORCEDETH is not set -CONFIG_NET_VENDOR_OKI=y -# CONFIG_ETHOC is not set -CONFIG_NET_VENDOR_PACKET_ENGINES=y -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_NET_VENDOR_PENSANDO=y -CONFIG_IONIC=m -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_QLA3XXX=m -CONFIG_QLCNIC=m -CONFIG_QLCNIC_SRIOV=y -CONFIG_QLCNIC_DCB=y -CONFIG_QLCNIC_HWMON=y -CONFIG_NETXEN_NIC=m -CONFIG_QED=m -CONFIG_QED_LL2=y -CONFIG_QED_SRIOV=y -CONFIG_QEDE=m -CONFIG_QED_RDMA=y -CONFIG_QED_OOO=y -CONFIG_NET_VENDOR_QUALCOMM=y -# CONFIG_QCA7000_SPI is not set -# CONFIG_QCA7000_UART is not set -CONFIG_QCOM_EMAC=m -# CONFIG_RMNET is not set -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -CONFIG_8139TOO_TUNE_TWISTER=y -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R8169=m -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_ROCKER=y -# CONFIG_ROCKER is not set -CONFIG_NET_VENDOR_SAMSUNG=y -# CONFIG_SXGBE_ETH is not set -# CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_NET_VENDOR_SOLARFLARE=y -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_SFC_MCDI_MON=y -CONFIG_SFC_SRIOV=y -CONFIG_SFC_MCDI_LOGGING=y -CONFIG_SFC_FALCON=m -CONFIG_SFC_FALCON_MTD=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -# CONFIG_SIS900 is not set -CONFIG_SIS190=m -CONFIG_NET_VENDOR_SMSC=y -CONFIG_SMC91X=m -CONFIG_EPIC100=m -CONFIG_SMSC911X=m -CONFIG_SMSC9420=m -CONFIG_NET_VENDOR_SOCIONEXT=y -CONFIG_SNI_NETSEC=m -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_STMMAC_ETH=m -# CONFIG_STMMAC_SELFTESTS is not set -CONFIG_STMMAC_PLATFORM=m -# CONFIG_DWMAC_DWC_QOS_ETH is not set -CONFIG_DWMAC_GENERIC=m -CONFIG_DWMAC_IPQ806X=m -CONFIG_DWMAC_MESON=m -CONFIG_DWMAC_QCOM_ETHQOS=m -CONFIG_DWMAC_ROCKCHIP=m -CONFIG_DWMAC_SUNXI=m -CONFIG_DWMAC_SUN8I=m -# CONFIG_STMMAC_PCI is not set -CONFIG_NET_VENDOR_SUN=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -CONFIG_CASSINI=m -CONFIG_NIU=m -CONFIG_NET_VENDOR_SYNOPSYS=y -# CONFIG_DWC_XLGMAC is not set -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_TEHUTI=m -CONFIG_NET_VENDOR_TI=y -# CONFIG_TI_CPSW_PHY_SEL is not set -CONFIG_TLAN=m -CONFIG_NET_VENDOR_VIA=y -# CONFIG_VIA_RHINE is not set -CONFIG_VIA_VELOCITY=m -CONFIG_NET_VENDOR_WIZNET=y -# CONFIG_WIZNET_W5100 is not set -# CONFIG_WIZNET_W5300 is not set -CONFIG_NET_VENDOR_XILINX=y -CONFIG_XILINX_AXI_EMAC=m -CONFIG_XILINX_LL_TEMAC=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -# CONFIG_HIPPI is not set -# CONFIG_NET_SB1000 is not set -CONFIG_MDIO_DEVICE=m -CONFIG_MDIO_BUS=m -# CONFIG_MDIO_BCM_UNIMAC is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_MDIO_BUS_MUX=m -# CONFIG_MDIO_BUS_MUX_GPIO is not set -CONFIG_MDIO_BUS_MUX_MESON_G12A=m -CONFIG_MDIO_BUS_MUX_MMIOREG=m -# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set -CONFIG_MDIO_CAVIUM=m -CONFIG_MDIO_HISI_FEMAC=m -CONFIG_MDIO_IPQ8064=m -CONFIG_MDIO_MSCC_MIIM=m -CONFIG_MDIO_MVUSB=m -# CONFIG_MDIO_OCTEON is not set -# CONFIG_MDIO_SUN4I is not set -CONFIG_MDIO_THUNDER=m -CONFIG_MDIO_XGENE=m -CONFIG_MDIO_XPCS=m -CONFIG_PHYLINK=m -CONFIG_PHYLIB=m -CONFIG_SWPHY=y -# CONFIG_LED_TRIGGER_PHY is not set - -# -# MII PHY device drivers -# -# CONFIG_SFP is not set -CONFIG_ADIN_PHY=m -CONFIG_AMD_PHY=m -CONFIG_AQUANTIA_PHY=m -CONFIG_AX88796B_PHY=m -# CONFIG_BCM7XXX_PHY is not set -CONFIG_BCM87XX_PHY=m -CONFIG_BCM_NET_PHYLIB=m -CONFIG_BROADCOM_PHY=m -CONFIG_BCM84881_PHY=m -CONFIG_CICADA_PHY=m -# CONFIG_CORTINA_PHY is not set -CONFIG_DAVICOM_PHY=m -# CONFIG_DP83822_PHY is not set -CONFIG_DP83TC811_PHY=m -CONFIG_DP83848_PHY=m -CONFIG_DP83867_PHY=m -CONFIG_DP83869_PHY=m -CONFIG_FIXED_PHY=m -CONFIG_ICPLUS_PHY=m -# CONFIG_INTEL_XWAY_PHY is not set -CONFIG_LSI_ET1011C_PHY=m -CONFIG_LXT_PHY=m -CONFIG_MARVELL_PHY=m -CONFIG_MARVELL_10G_PHY=m -CONFIG_MESON_GXL_PHY=m -CONFIG_MICREL_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_MICROCHIP_T1_PHY=m -CONFIG_MICROSEMI_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_NXP_TJA11XX_PHY=m -CONFIG_AT803X_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_REALTEK_PHY=m -# CONFIG_RENESAS_PHY is not set -# CONFIG_ROCKCHIP_PHY is not set -CONFIG_SMSC_PHY=m -CONFIG_STE10XP=m -CONFIG_TERANETICS_PHY=m -CONFIG_VITESSE_PHY=m -# CONFIG_XILINX_GMII2RGMII is not set -# CONFIG_MICREL_KS8995MA is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLHC=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y - -# -# Host-side USB support is needed for USB Network Adapter support -# -CONFIG_USB_NET_DRIVERS=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET_ENABLE=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_CDC_PHONET=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m -CONFIG_USB_NET_AQC111=m -CONFIG_WLAN=y -# CONFIG_WIRELESS_WDS is not set -CONFIG_WLAN_VENDOR_ADMTEK=y -CONFIG_ADM8211=m -CONFIG_ATH_COMMON=m -CONFIG_WLAN_VENDOR_ATH=y -# CONFIG_ATH_DEBUG is not set -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -# CONFIG_ATH5K_TRACER is not set -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -CONFIG_ATH9K_PCI=y -# CONFIG_ATH9K_AHB is not set -# CONFIG_ATH9K_DEBUGFS is not set -# CONFIG_ATH9K_DYNACK is not set -# CONFIG_ATH9K_WOW is not set -CONFIG_ATH9K_RFKILL=y -# CONFIG_ATH9K_CHANNEL_CONTEXT is not set -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_PCI_NO_EEPROM=m -CONFIG_ATH9K_HTC=m -# CONFIG_ATH9K_HTC_DEBUGFS is not set -# CONFIG_ATH9K_HWRNG is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -CONFIG_CARL9170_WPC=y -# CONFIG_CARL9170_HWRNG is not set -CONFIG_ATH6KL=m -CONFIG_ATH6KL_SDIO=m -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m -CONFIG_WIL6210=m -CONFIG_WIL6210_ISR_COR=y -CONFIG_WIL6210_TRACING=y -CONFIG_WIL6210_DEBUGFS=y -CONFIG_ATH10K=m -CONFIG_ATH10K_CE=y -CONFIG_ATH10K_PCI=m -# CONFIG_ATH10K_AHB is not set -# CONFIG_ATH10K_SDIO is not set -# CONFIG_ATH10K_USB is not set -# CONFIG_ATH10K_SNOC is not set -# CONFIG_ATH10K_DEBUG is not set -# CONFIG_ATH10K_DEBUGFS is not set -# CONFIG_ATH10K_TRACING is not set -CONFIG_WCN36XX=m -# CONFIG_WCN36XX_DEBUGFS is not set -CONFIG_WLAN_VENDOR_ATMEL=y -# CONFIG_ATMEL is not set -CONFIG_AT76C50X_USB=m -CONFIG_WLAN_VENDOR_BROADCOM=y -CONFIG_B43=m -CONFIG_B43_BCMA=y -CONFIG_B43_SSB=y -CONFIG_B43_BUSES_BCMA_AND_SSB=y -# CONFIG_B43_BUSES_BCMA is not set -# CONFIG_B43_BUSES_SSB is not set -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_SDIO=y -CONFIG_B43_BCMA_PIO=y -CONFIG_B43_PIO=y -CONFIG_B43_PHY_G=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_HT=y -CONFIG_B43_LEDS=y -CONFIG_B43_HWRNG=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_HWRNG=y -CONFIG_B43LEGACY_DEBUG=y -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_BRCMUTIL=m -CONFIG_BRCMSMAC=m -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -CONFIG_BRCMFMAC_PROTO_MSGBUF=y -CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_USB=y -CONFIG_BRCMFMAC_PCIE=y -# CONFIG_BRCM_TRACING is not set -# CONFIG_BRCMDBG is not set -CONFIG_WLAN_VENDOR_CISCO=y -CONFIG_WLAN_VENDOR_INTEL=y -# CONFIG_IPW2100 is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m - -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -# end of iwl3945 / iwl4965 Debugging Options - -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -CONFIG_IWLDVM=m -CONFIG_IWLMVM=m -CONFIG_IWLWIFI_OPMODE_MODULAR=y -# CONFIG_IWLWIFI_BCAST_FILTERING is not set - -# -# Debugging Options -# -# CONFIG_IWLWIFI_DEBUG is not set -# CONFIG_IWLWIFI_DEVICE_TRACING is not set -# end of Debugging Options - -CONFIG_WLAN_VENDOR_INTERSIL=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -# CONFIG_HERMES is not set -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -# CONFIG_P54_SPI is not set -CONFIG_P54_LEDS=y -# CONFIG_PRISM54 is not set -CONFIG_WLAN_VENDOR_MARVELL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_SPI is not set -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -# CONFIG_MWIFIEX is not set -CONFIG_MWL8K=m -CONFIG_WLAN_VENDOR_MEDIATEK=y -CONFIG_MT7601U=m -# CONFIG_MT76x0U is not set -# CONFIG_MT76x0E is not set -# CONFIG_MT76x2E is not set -# CONFIG_MT76x2U is not set -# CONFIG_MT7603E is not set -# CONFIG_MT7615E is not set -CONFIG_WLAN_VENDOR_RALINK=y -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y -CONFIG_RT2800PCI_RT3290=y -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -# CONFIG_RT2800USB_UNKNOWN is not set -CONFIG_RT2800_LIB=m -CONFIG_RT2800_LIB_MMIO=m -CONFIG_RT2X00_LIB_MMIO=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set -CONFIG_WLAN_VENDOR_REALTEK=y -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m -CONFIG_RTL8723AE=m -CONFIG_RTL8723BE=m -CONFIG_RTL8188EE=m -CONFIG_RTL8192EE=m -CONFIG_RTL8821AE=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_PCI=m -CONFIG_RTLWIFI_USB=m -# CONFIG_RTLWIFI_DEBUG is not set -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8723_COMMON=m -CONFIG_RTLBTCOEXIST=m -CONFIG_RTL8XXXU=m -# CONFIG_RTL8XXXU_UNTESTED is not set -# CONFIG_RTW88 is not set -CONFIG_WLAN_VENDOR_RSI=y -CONFIG_RSI_91X=m -CONFIG_RSI_DEBUGFS=y -# CONFIG_RSI_SDIO is not set -CONFIG_RSI_USB=m -CONFIG_RSI_COEX=y -CONFIG_WLAN_VENDOR_ST=y -# CONFIG_CW1200 is not set -CONFIG_WLAN_VENDOR_TI=y -CONFIG_WL1251=m -CONFIG_WL1251_SPI=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SPI=m -CONFIG_WLCORE_SDIO=m -CONFIG_WILINK_PLATFORM_DATA=y -CONFIG_WLAN_VENDOR_ZYDAS=y -# CONFIG_USB_ZD1201 is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_WLAN_VENDOR_QUANTENNA=y -CONFIG_QTNFMAC=m -CONFIG_QTNFMAC_PCIE=m -CONFIG_MAC80211_HWSIM=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_VIRT_WIFI=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 -# end of WiMAX Wireless Broadband devices - -# CONFIG_WAN is not set -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKELB=m -CONFIG_IEEE802154_AT86RF230=m -# CONFIG_IEEE802154_AT86RF230_DEBUGFS is not set -CONFIG_IEEE802154_MRF24J40=m -CONFIG_IEEE802154_CC2520=m -CONFIG_IEEE802154_ATUSB=m -CONFIG_IEEE802154_ADF7242=m -# CONFIG_IEEE802154_CA8210 is not set -CONFIG_IEEE802154_MCR20A=m -# CONFIG_IEEE802154_HWSIM is not set -CONFIG_XEN_NETDEV_FRONTEND=m -CONFIG_XEN_NETDEV_BACKEND=m -# CONFIG_VMXNET3 is not set -# CONFIG_FUJITSU_ES is not set -# CONFIG_NETDEVSIM is not set -CONFIG_NET_FAILOVER=m -# CONFIG_ISDN is not set -# CONFIG_NVM is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=y -CONFIG_INPUT_FF_MEMLESS=m -CONFIG_INPUT_POLLDEV=m -CONFIG_INPUT_SPARSEKMAP=m -CONFIG_INPUT_MATRIXKMAP=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ADC is not set -CONFIG_KEYBOARD_ADP5588=m -# CONFIG_KEYBOARD_ADP5589 is not set -CONFIG_KEYBOARD_ATKBD=y -CONFIG_KEYBOARD_QT1050=m -# CONFIG_KEYBOARD_QT1070 is not set -CONFIG_KEYBOARD_QT2160=m -# CONFIG_KEYBOARD_DLINK_DIR685 is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_GPIO=m -# CONFIG_KEYBOARD_GPIO_POLLED is not set -# CONFIG_KEYBOARD_TCA6416 is not set -# CONFIG_KEYBOARD_TCA8418 is not set -# CONFIG_KEYBOARD_MATRIX is not set -CONFIG_KEYBOARD_LM8323=m -# CONFIG_KEYBOARD_LM8333 is not set -CONFIG_KEYBOARD_MAX7359=m -# CONFIG_KEYBOARD_MCS is not set -# CONFIG_KEYBOARD_MPR121 is not set -CONFIG_KEYBOARD_SNVS_PWRKEY=m -CONFIG_KEYBOARD_IMX=m -CONFIG_KEYBOARD_IMX_SC_KEY=m -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_KEYBOARD_TEGRA=m -CONFIG_KEYBOARD_OPENCORES=m -# CONFIG_KEYBOARD_SAMSUNG is not set -CONFIG_KEYBOARD_STOWAWAY=m -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_SUN4I_LRADC is not set -CONFIG_KEYBOARD_IQS62X=m -# CONFIG_KEYBOARD_OMAP4 is not set -# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_CROS_EC is not set -# CONFIG_KEYBOARD_CAP11XX is not set -# CONFIG_KEYBOARD_BCM is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_BYD=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y -CONFIG_MOUSE_PS2_SENTELIC=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -CONFIG_MOUSE_PS2_FOCALTECH=y -CONFIG_MOUSE_PS2_SMBUS=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_CYAPA is not set -# CONFIG_MOUSE_ELAN_I2C is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_USB_PEGASUS=m -CONFIG_TABLET_SERIAL_WACOM4=m -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_ATMEL_CAPTOUCH is not set -# CONFIG_INPUT_BMA150 is not set -# CONFIG_INPUT_E3X0_BUTTON is not set -# CONFIG_INPUT_MSM_VIBRATOR is not set -CONFIG_INPUT_PM8941_PWRKEY=m -# CONFIG_INPUT_PM8XXX_VIBRATOR is not set -# CONFIG_INPUT_MMA8450 is not set -# CONFIG_INPUT_GP2A is not set -# CONFIG_INPUT_GPIO_BEEPER is not set -# CONFIG_INPUT_GPIO_DECODER is not set -# CONFIG_INPUT_GPIO_VIBRA is not set -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -# CONFIG_INPUT_KXTJ9 is not set -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -# CONFIG_INPUT_REGULATOR_HAPTIC is not set -CONFIG_INPUT_AXP20X_PEK=m -CONFIG_INPUT_UINPUT=m -# CONFIG_INPUT_PCF8574 is not set -# CONFIG_INPUT_PWM_BEEPER is not set -# CONFIG_INPUT_PWM_VIBRA is not set -# CONFIG_INPUT_RK805_PWRKEY is not set -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_IMS_PCU is not set -# CONFIG_INPUT_CMA3000 is not set -CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y -# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set -# CONFIG_INPUT_DRV260X_HAPTICS is not set -# CONFIG_INPUT_DRV2665_HAPTICS is not set -# CONFIG_INPUT_DRV2667_HAPTICS is not set -CONFIG_INPUT_HISI_POWERKEY=m -CONFIG_RMI4_CORE=m -# CONFIG_RMI4_I2C is not set -# CONFIG_RMI4_SPI is not set -# CONFIG_RMI4_SMB is not set -CONFIG_RMI4_F03=y -CONFIG_RMI4_F03_SERIO=m -CONFIG_RMI4_2D_SENSOR=y -CONFIG_RMI4_F11=y -CONFIG_RMI4_F12=y -CONFIG_RMI4_F30=y -# CONFIG_RMI4_F34 is not set -# CONFIG_RMI4_F54 is not set -# CONFIG_RMI4_F55 is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_AMBAKMI is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_ALTERA_PS2=m -# CONFIG_SERIO_PS2MULT is not set -# CONFIG_SERIO_ARC_PS2 is not set -# CONFIG_SERIO_APBPS2 is not set -# CONFIG_SERIO_SUN4I_PS2 is not set -# CONFIG_SERIO_GPIO_PS2 is not set -# CONFIG_USERIO is not set -# CONFIG_GAMEPORT is not set -# end of Hardware I/O ports -# end of Input device support - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_LDISC_AUTOLOAD=y - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_16550A_VARIANTS=y -# CONFIG_SERIAL_8250_FINTEK is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_EXAR=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_ASPEED_VUART is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set -CONFIG_SERIAL_8250_DWLIB=y -CONFIG_SERIAL_8250_BCM2835AUX=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_DW=y -# CONFIG_SERIAL_8250_RT288X is not set -CONFIG_SERIAL_8250_TEGRA=y -CONFIG_SERIAL_OF_PLATFORM=y - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set -CONFIG_SERIAL_MESON=y -CONFIG_SERIAL_MESON_CONSOLE=y -CONFIG_SERIAL_TEGRA=y -CONFIG_SERIAL_TEGRA_TCU=m -# CONFIG_SERIAL_MAX3100 is not set -# CONFIG_SERIAL_MAX310X is not set -CONFIG_SERIAL_IMX=m -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_SERIAL_QCOM_GENI=m -# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set -# CONFIG_SERIAL_SIFIVE is not set -# CONFIG_SERIAL_SCCNXP is not set -# CONFIG_SERIAL_SC16IS7XX is not set -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -# CONFIG_SERIAL_IFX6X60 is not set -# CONFIG_SERIAL_XILINX_PS_UART is not set -# CONFIG_SERIAL_ARC is not set -CONFIG_SERIAL_RP2=m -CONFIG_SERIAL_RP2_NR_UARTS=32 -# CONFIG_SERIAL_FSL_LPUART is not set -# CONFIG_SERIAL_FSL_LINFLEXUART is not set -# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set -# CONFIG_SERIAL_SPRD is not set -CONFIG_SERIAL_MVEBU_UART=y -CONFIG_SERIAL_MVEBU_CONSOLE=y -# end of Serial drivers - -CONFIG_SERIAL_MCTRL_GPIO=y -# CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_N_GSM=m -CONFIG_NOZOMI=m -CONFIG_NULL_TTY=m -# CONFIG_TRACE_SINK is not set -CONFIG_HVC_DRIVER=y -CONFIG_HVC_IRQ=y -CONFIG_HVC_XEN=y -CONFIG_HVC_XEN_FRONTEND=y -# CONFIG_HVC_DCC is not set -CONFIG_SERIAL_DEV_BUS=m -CONFIG_TTY_PRINTK=m -CONFIG_TTY_PRINTK_LEVEL=6 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -CONFIG_VIRTIO_CONSOLE=m -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DMI_DECODE=y -CONFIG_IPMI_PLAT_DATA=y -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_SSIF=m -# CONFIG_IPMI_WATCHDOG is not set -# CONFIG_IPMI_POWEROFF is not set -CONFIG_HW_RANDOM=m -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -CONFIG_HW_RANDOM_BCM2835=m -CONFIG_HW_RANDOM_IPROC_RNG200=m -# CONFIG_HW_RANDOM_OMAP is not set -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_HW_RANDOM_HISI=m -CONFIG_HW_RANDOM_HISI_V2=m -CONFIG_HW_RANDOM_XGENE=m -CONFIG_HW_RANDOM_MESON=m -CONFIG_HW_RANDOM_CAVIUM=m -CONFIG_HW_RANDOM_OPTEE=m -# CONFIG_APPLICOM is not set -CONFIG_DEVMEM=y -# CONFIG_RAW_DRIVER is not set -CONFIG_DEVPORT=y -# CONFIG_TCG_TPM is not set -# CONFIG_XILLYBUS is not set -# end of Character devices - -# CONFIG_RANDOM_TRUST_CPU is not set -# CONFIG_RANDOM_TRUST_BOOTLOADER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_ACPI_I2C_OPREGION=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_MUX=m - -# -# Multiplexer I2C Chip support -# -# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_GPMUX is not set -# CONFIG_I2C_MUX_LTC4306 is not set -# CONFIG_I2C_MUX_PCA9541 is not set -# CONFIG_I2C_MUX_PCA954x is not set -# CONFIG_I2C_MUX_PINCTRL is not set -# CONFIG_I2C_MUX_REG is not set -# CONFIG_I2C_DEMUX_PINCTRL is not set -# CONFIG_I2C_MUX_MLXCPLD is not set -# end of Multiplexer I2C Chip support - -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_SMBUS=m -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_AMD_MP2 is not set -# CONFIG_I2C_HIX5HD2 is not set -# CONFIG_I2C_I801 is not set -CONFIG_I2C_ISCH=m -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_NVIDIA_GPU is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# ACPI drivers -# -# CONFIG_I2C_SCMI is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_BCM2835=m -# CONFIG_I2C_CADENCE is not set -# CONFIG_I2C_CBUS_GPIO is not set -CONFIG_I2C_DESIGNWARE_CORE=m -CONFIG_I2C_DESIGNWARE_PLATFORM=m -# CONFIG_I2C_DESIGNWARE_SLAVE is not set -# CONFIG_I2C_DESIGNWARE_PCI is not set -# CONFIG_I2C_EMEV2 is not set -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_IMX=m -CONFIG_I2C_IMX_LPI2C=m -CONFIG_I2C_MESON=m -CONFIG_I2C_MV64XXX=m -# CONFIG_I2C_NOMADIK is not set -CONFIG_I2C_OCORES=m -CONFIG_I2C_PCA_PLATFORM=m -CONFIG_I2C_PXA=m -# CONFIG_I2C_PXA_SLAVE is not set -CONFIG_I2C_QCOM_GENI=m -CONFIG_I2C_QUP=m -CONFIG_I2C_RK3X=m -CONFIG_I2C_SIMTEC=m -CONFIG_I2C_SYNQUACER=m -CONFIG_I2C_TEGRA=m -CONFIG_I2C_TEGRA_BPMP=y -# CONFIG_I2C_VERSATILE is not set -CONFIG_I2C_THUNDERX=m -# CONFIG_I2C_XILINX is not set -CONFIG_I2C_XLP9XX=m - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_DIOLAN_U2C=m -# CONFIG_I2C_PARPORT is not set -CONFIG_I2C_ROBOTFUZZ_OSIF=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m -CONFIG_I2C_VIPERBOARD=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_CROS_EC_TUNNEL=m -CONFIG_I2C_XGENE_SLIMPRO=m -# end of I2C Hardware Bus support - -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_SLAVE is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# end of I2C support - -CONFIG_I3C=m -CONFIG_CDNS_I3C_MASTER=m -CONFIG_DW_I3C_MASTER=m -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_ALTERA is not set -CONFIG_SPI_ARMADA_3700=m -# CONFIG_SPI_AXI_SPI_ENGINE is not set -CONFIG_SPI_BCM2835=m -CONFIG_SPI_BCM2835AUX=m -CONFIG_SPI_BITBANG=m -CONFIG_SPI_BUTTERFLY=m -# CONFIG_SPI_CADENCE is not set -# CONFIG_SPI_DESIGNWARE is not set -CONFIG_SPI_FSL_LPSPI=m -CONFIG_SPI_FSL_QUADSPI=m -CONFIG_SPI_HISI_SFC_V3XX=m -CONFIG_SPI_NXP_FLEXSPI=m -# CONFIG_SPI_GPIO is not set -CONFIG_SPI_IMX=m -CONFIG_SPI_LM70_LLP=m -# CONFIG_SPI_FSL_SPI is not set -# CONFIG_SPI_MESON_SPICC is not set -CONFIG_SPI_MESON_SPIFC=m -# CONFIG_SPI_OC_TINY is not set -# CONFIG_SPI_ORION is not set -# CONFIG_SPI_PL022 is not set -# CONFIG_SPI_PXA2XX is not set -# CONFIG_SPI_ROCKCHIP is not set -# CONFIG_SPI_QCOM_QSPI is not set -CONFIG_SPI_QUP=m -# CONFIG_SPI_QCOM_GENI is not set -# CONFIG_SPI_SC18IS602 is not set -# CONFIG_SPI_SIFIVE is not set -# CONFIG_SPI_SUN4I is not set -# CONFIG_SPI_SUN6I is not set -CONFIG_SPI_SYNQUACER=m -# CONFIG_SPI_MXIC is not set -CONFIG_SPI_TEGRA114=m -CONFIG_SPI_TEGRA20_SFLASH=m -CONFIG_SPI_TEGRA20_SLINK=m -CONFIG_SPI_THUNDERX=m -# CONFIG_SPI_XCOMM is not set -# CONFIG_SPI_XILINX is not set -CONFIG_SPI_XLP=m -# CONFIG_SPI_ZYNQMP_GQSPI is not set - -# -# SPI Multiplexer support -# -CONFIG_SPI_MUX=m - -# -# SPI Protocol Masters -# -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_LOOPBACK_TEST is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_SPI_SLAVE is not set -CONFIG_SPMI=y -CONFIG_SPMI_MSM_PMIC_ARB=y -# CONFIG_HSI is not set -CONFIG_PPS=y -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -# CONFIG_PPS_CLIENT_GPIO is not set - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=y -CONFIG_PTP_1588_CLOCK_QORIQ=m - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -CONFIG_PTP_1588_CLOCK_IDT82P33=m -CONFIG_PTP_1588_CLOCK_IDTCM=m -# end of PTP clock support - -CONFIG_PINCTRL=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_PINMUX=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AXP209=m -CONFIG_PINCTRL_AMD=y -CONFIG_PINCTRL_BM1880=y -# CONFIG_PINCTRL_MCP23S08 is not set -CONFIG_PINCTRL_ROCKCHIP=y -CONFIG_PINCTRL_SINGLE=y -# CONFIG_PINCTRL_SX150X is not set -# CONFIG_PINCTRL_STMFX is not set -CONFIG_PINCTRL_MAX77620=y -# CONFIG_PINCTRL_RK805 is not set -# CONFIG_PINCTRL_OCELOT is not set -CONFIG_PINCTRL_BCM2835=y -CONFIG_PINCTRL_IMX=y -CONFIG_PINCTRL_IMX_SCU=y -CONFIG_PINCTRL_IMX8MM=y -CONFIG_PINCTRL_IMX8MN=y -CONFIG_PINCTRL_IMX8MP=y -CONFIG_PINCTRL_IMX8MQ=y -CONFIG_PINCTRL_IMX8QM=y -CONFIG_PINCTRL_IMX8QXP=y -CONFIG_PINCTRL_MVEBU=y -CONFIG_PINCTRL_ARMADA_AP806=y -CONFIG_PINCTRL_ARMADA_CP110=y -CONFIG_PINCTRL_ARMADA_37XX=y -CONFIG_PINCTRL_MSM=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_APQ8084 is not set -# CONFIG_PINCTRL_IPQ4019 is not set -# CONFIG_PINCTRL_IPQ8064 is not set -# CONFIG_PINCTRL_IPQ8074 is not set -# CONFIG_PINCTRL_IPQ6018 is not set -# CONFIG_PINCTRL_MSM8660 is not set -# CONFIG_PINCTRL_MSM8960 is not set -# CONFIG_PINCTRL_MDM9615 is not set -# CONFIG_PINCTRL_MSM8X74 is not set -CONFIG_PINCTRL_MSM8916=y -# CONFIG_PINCTRL_MSM8976 is not set -# CONFIG_PINCTRL_MSM8994 is not set -CONFIG_PINCTRL_MSM8996=y -# CONFIG_PINCTRL_MSM8998 is not set -# CONFIG_PINCTRL_QCS404 is not set -# CONFIG_PINCTRL_QDF2XXX is not set -CONFIG_PINCTRL_QCOM_SPMI_PMIC=y -CONFIG_PINCTRL_QCOM_SSBI_PMIC=y -# CONFIG_PINCTRL_SC7180 is not set -# CONFIG_PINCTRL_SDM660 is not set -# CONFIG_PINCTRL_SDM845 is not set -CONFIG_PINCTRL_SM8150=m -CONFIG_PINCTRL_SUNXI=y -# CONFIG_PINCTRL_SUN4I_A10 is not set -# CONFIG_PINCTRL_SUN5I is not set -# CONFIG_PINCTRL_SUN6I_A31 is not set -# CONFIG_PINCTRL_SUN6I_A31_R is not set -# CONFIG_PINCTRL_SUN8I_A23 is not set -# CONFIG_PINCTRL_SUN8I_A33 is not set -# CONFIG_PINCTRL_SUN8I_A83T is not set -# CONFIG_PINCTRL_SUN8I_A83T_R is not set -# CONFIG_PINCTRL_SUN8I_A23_R is not set -# CONFIG_PINCTRL_SUN8I_H3 is not set -CONFIG_PINCTRL_SUN8I_H3_R=y -# CONFIG_PINCTRL_SUN8I_V3S is not set -# CONFIG_PINCTRL_SUN9I_A80 is not set -# CONFIG_PINCTRL_SUN9I_A80_R is not set -CONFIG_PINCTRL_SUN50I_A64=y -CONFIG_PINCTRL_SUN50I_A64_R=y -CONFIG_PINCTRL_SUN50I_H5=y -CONFIG_PINCTRL_SUN50I_H6=y -CONFIG_PINCTRL_SUN50I_H6_R=y -CONFIG_PINCTRL_TEGRA=y -CONFIG_PINCTRL_TEGRA124=y -CONFIG_PINCTRL_TEGRA210=y -CONFIG_PINCTRL_TEGRA194=y -CONFIG_PINCTRL_TEGRA_XUSB=y -CONFIG_PINCTRL_MESON=y -CONFIG_PINCTRL_MESON_GXBB=y -CONFIG_PINCTRL_MESON_GXL=y -CONFIG_PINCTRL_MESON8_PMX=y -CONFIG_PINCTRL_MESON_AXG=y -CONFIG_PINCTRL_MESON_AXG_PMX=y -CONFIG_PINCTRL_MESON_G12A=y -CONFIG_PINCTRL_MESON_A1=y -CONFIG_PINCTRL_MADERA=m -CONFIG_PINCTRL_EQUILIBRIUM=m -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_FASTPATH_LIMIT=512 -CONFIG_OF_GPIO=y -CONFIG_GPIO_ACPI=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=y - -# -# Memory mapped GPIO drivers -# -# CONFIG_GPIO_74XX_MMIO is not set -# CONFIG_GPIO_ALTERA is not set -# CONFIG_GPIO_AMDPT is not set -CONFIG_GPIO_RASPBERRYPI_EXP=m -CONFIG_GPIO_CADENCE=m -# CONFIG_GPIO_DWAPB is not set -# CONFIG_GPIO_EXAR is not set -# CONFIG_GPIO_FTGPIO010 is not set -CONFIG_GPIO_GENERIC_PLATFORM=y -# CONFIG_GPIO_GRGPIO is not set -# CONFIG_GPIO_HLWD is not set -CONFIG_GPIO_LOGICVC=m -CONFIG_GPIO_MB86S7X=m -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_MXC=y -CONFIG_GPIO_PL061=y -# CONFIG_GPIO_SAMA5D2_PIOBU is not set -CONFIG_GPIO_SIFIVE=y -# CONFIG_GPIO_SYSCON is not set -CONFIG_GPIO_TEGRA=y -CONFIG_GPIO_TEGRA186=y -# CONFIG_GPIO_THUNDERX is not set -CONFIG_GPIO_XGENE=y -CONFIG_GPIO_XGENE_SB=m -CONFIG_GPIO_XILINX=m -CONFIG_GPIO_XLP=y -# CONFIG_GPIO_AMD_FCH is not set -# end of Memory mapped GPIO drivers - -# -# I2C GPIO expanders -# -# CONFIG_GPIO_ADP5588 is not set -# CONFIG_GPIO_ADNP is not set -# CONFIG_GPIO_GW_PLD is not set -# CONFIG_GPIO_MAX7300 is not set -# CONFIG_GPIO_MAX732X is not set -CONFIG_GPIO_PCA953X=y -CONFIG_GPIO_PCA953X_IRQ=y -# CONFIG_GPIO_PCF857X is not set -# CONFIG_GPIO_TPIC2810 is not set -# end of I2C GPIO expanders - -# -# MFD GPIO expanders -# -CONFIG_GPIO_BD70528=m -CONFIG_GPIO_BD71828=m -CONFIG_GPIO_MADERA=m -CONFIG_GPIO_MAX77620=y -# end of MFD GPIO expanders - -# -# PCI GPIO expanders -# -# CONFIG_GPIO_PCI_IDIO_16 is not set -# CONFIG_GPIO_PCIE_IDIO_24 is not set -# CONFIG_GPIO_RDC321X is not set -# end of PCI GPIO expanders - -# -# SPI GPIO expanders -# -# CONFIG_GPIO_74X164 is not set -# CONFIG_GPIO_MAX3191X is not set -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MC33880 is not set -# CONFIG_GPIO_PISOSR is not set -# CONFIG_GPIO_XRA1403 is not set -CONFIG_GPIO_MOXTET=m -# end of SPI GPIO expanders - -# -# USB GPIO expanders -# -CONFIG_GPIO_VIPERBOARD=m -# end of USB GPIO expanders - -# CONFIG_GPIO_MOCKUP is not set -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -# CONFIG_W1_MASTER_MATROX is not set -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_MXC=m -# CONFIG_W1_MASTER_DS1WM is not set -CONFIG_W1_MASTER_GPIO=m -# CONFIG_W1_MASTER_SGI is not set -# end of 1-wire Bus Masters - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -CONFIG_W1_SLAVE_DS2405=m -CONFIG_W1_SLAVE_DS2408=m -CONFIG_W1_SLAVE_DS2408_READBACK=y -CONFIG_W1_SLAVE_DS2413=m -CONFIG_W1_SLAVE_DS2406=m -CONFIG_W1_SLAVE_DS2423=m -CONFIG_W1_SLAVE_DS2805=m -CONFIG_W1_SLAVE_DS2430=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -# CONFIG_W1_SLAVE_DS2433_CRC is not set -CONFIG_W1_SLAVE_DS2438=m -# CONFIG_W1_SLAVE_DS250X is not set -CONFIG_W1_SLAVE_DS2780=m -CONFIG_W1_SLAVE_DS2781=m -CONFIG_W1_SLAVE_DS28E04=m -CONFIG_W1_SLAVE_DS28E17=m -# end of 1-wire Slaves - -CONFIG_POWER_AVS=y -CONFIG_QCOM_CPR=m -CONFIG_ROCKCHIP_IODOMAIN=m -CONFIG_POWER_RESET=y -# CONFIG_POWER_RESET_BRCMSTB is not set -# CONFIG_POWER_RESET_GPIO is not set -# CONFIG_POWER_RESET_GPIO_RESTART is not set -CONFIG_POWER_RESET_HISI=y -CONFIG_POWER_RESET_MSM=y -CONFIG_POWER_RESET_QCOM_PON=m -# CONFIG_POWER_RESET_LTC2952 is not set -# CONFIG_POWER_RESET_RESTART is not set -CONFIG_POWER_RESET_VEXPRESS=y -CONFIG_POWER_RESET_XGENE=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_POWER_RESET_SYSCON_POWEROFF=y -CONFIG_REBOOT_MODE=m -# CONFIG_SYSCON_REBOOT_MODE is not set -CONFIG_NVMEM_REBOOT_MODE=m -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_POWER_SUPPLY_HWMON=y -# CONFIG_PDA_POWER is not set -# CONFIG_GENERIC_ADC_BATTERY is not set -# CONFIG_TEST_POWER is not set -CONFIG_CHARGER_ADP5061=m -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_BATTERY_DS2780 is not set -# CONFIG_BATTERY_DS2781 is not set -# CONFIG_BATTERY_DS2782 is not set -# CONFIG_BATTERY_LEGO_EV3 is not set -# CONFIG_BATTERY_SBS is not set -# CONFIG_CHARGER_SBS is not set -# CONFIG_MANAGER_SBS is not set -CONFIG_BATTERY_BQ27XXX=m -# CONFIG_BATTERY_BQ27XXX_I2C is not set -CONFIG_BATTERY_BQ27XXX_HDQ=m -CONFIG_CHARGER_AXP20X=m -CONFIG_BATTERY_AXP20X=m -CONFIG_AXP20X_POWER=m -CONFIG_AXP288_FUEL_GAUGE=m -# CONFIG_BATTERY_MAX17040 is not set -# CONFIG_BATTERY_MAX17042 is not set -# CONFIG_BATTERY_MAX1721X is not set -# CONFIG_CHARGER_ISP1704 is not set -# CONFIG_CHARGER_MAX8903 is not set -# CONFIG_CHARGER_LP8727 is not set -# CONFIG_CHARGER_GPIO is not set -# CONFIG_CHARGER_MANAGER is not set -# CONFIG_CHARGER_LT3651 is not set -# CONFIG_CHARGER_DETECTOR_MAX14656 is not set -CONFIG_CHARGER_QCOM_SMBB=m -# CONFIG_CHARGER_BQ2415X is not set -# CONFIG_CHARGER_BQ24190 is not set -# CONFIG_CHARGER_BQ24257 is not set -# CONFIG_CHARGER_BQ24735 is not set -# CONFIG_CHARGER_BQ25890 is not set -# CONFIG_CHARGER_SMB347 is not set -# CONFIG_BATTERY_GAUGE_LTC2941 is not set -# CONFIG_CHARGER_RT9455 is not set -CONFIG_CHARGER_CROS_USBPD=m -# CONFIG_CHARGER_UCS1002 is not set -# CONFIG_CHARGER_BD70528 is not set -CONFIG_HWMON=y -CONFIG_HWMON_VID=m -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -# CONFIG_SENSORS_AD7314 is not set -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -CONFIG_SENSORS_ADM1029=m -# CONFIG_SENSORS_ADM1031 is not set -CONFIG_SENSORS_ADM1177=m -CONFIG_SENSORS_ADM9240=m -# CONFIG_SENSORS_ADT7310 is not set -# CONFIG_SENSORS_ADT7410 is not set -CONFIG_SENSORS_ADT7411=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7475=m -# CONFIG_SENSORS_AS370 is not set -CONFIG_SENSORS_ASC7621=m -CONFIG_SENSORS_AXI_FAN_CONTROL=m -CONFIG_SENSORS_ARM_SCMI=m -# CONFIG_SENSORS_ASPEED is not set -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DRIVETEMP=m -CONFIG_SENSORS_DS620=m -# CONFIG_SENSORS_DS1621 is not set -CONFIG_SENSORS_I5K_AMB=m -# CONFIG_SENSORS_F71805F is not set -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_FTSTEUTATES=m -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -CONFIG_SENSORS_G760A=m -# CONFIG_SENSORS_G762 is not set -# CONFIG_SENSORS_GPIO_FAN is not set -# CONFIG_SENSORS_HIH6130 is not set -CONFIG_SENSORS_IBMAEM=m -CONFIG_SENSORS_IBMPEX=m -# CONFIG_SENSORS_IIO_HWMON is not set -# CONFIG_SENSORS_IT87 is not set -CONFIG_SENSORS_JC42=m -# CONFIG_SENSORS_POWR1220 is not set -CONFIG_SENSORS_LINEAGE=m -# CONFIG_SENSORS_LTC2945 is not set -CONFIG_SENSORS_LTC2947=m -CONFIG_SENSORS_LTC2947_I2C=m -CONFIG_SENSORS_LTC2947_SPI=m -# CONFIG_SENSORS_LTC2990 is not set -CONFIG_SENSORS_LTC4151=m -CONFIG_SENSORS_LTC4215=m -# CONFIG_SENSORS_LTC4222 is not set -CONFIG_SENSORS_LTC4245=m -# CONFIG_SENSORS_LTC4260 is not set -CONFIG_SENSORS_LTC4261=m -CONFIG_SENSORS_MAX1111=m -CONFIG_SENSORS_MAX16065=m -# CONFIG_SENSORS_MAX1619 is not set -CONFIG_SENSORS_MAX1668=m -# CONFIG_SENSORS_MAX197 is not set -# CONFIG_SENSORS_MAX31722 is not set -CONFIG_SENSORS_MAX31730=m -# CONFIG_SENSORS_MAX6621 is not set -CONFIG_SENSORS_MAX6639=m -CONFIG_SENSORS_MAX6642=m -CONFIG_SENSORS_MAX6650=m -# CONFIG_SENSORS_MAX6697 is not set -# CONFIG_SENSORS_MAX31790 is not set -# CONFIG_SENSORS_MCP3021 is not set -# CONFIG_SENSORS_TC654 is not set -CONFIG_SENSORS_ADCXX=m -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM70=m -CONFIG_SENSORS_LM73=m -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -CONFIG_SENSORS_LM93=m -# CONFIG_SENSORS_LM95234 is not set -CONFIG_SENSORS_LM95241=m -CONFIG_SENSORS_LM95245=m -# CONFIG_SENSORS_PC87360 is not set -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_SENSORS_NCT6683=m -CONFIG_SENSORS_NCT6775=m -# CONFIG_SENSORS_NCT7802 is not set -# CONFIG_SENSORS_NCT7904 is not set -# CONFIG_SENSORS_NPCM7XX is not set -# CONFIG_SENSORS_OCC_P8_I2C is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_PMBUS is not set -# CONFIG_SENSORS_PWM_FAN is not set -CONFIG_SENSORS_RASPBERRYPI_HWMON=m -# CONFIG_SENSORS_SHT15 is not set -CONFIG_SENSORS_SHT21=m -# CONFIG_SENSORS_SHT3x is not set -# CONFIG_SENSORS_SHTC1 is not set -# CONFIG_SENSORS_SIS5595 is not set -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_EMC1403=m -CONFIG_SENSORS_EMC2103=m -CONFIG_SENSORS_EMC6W201=m -# CONFIG_SENSORS_SMSC47M1 is not set -CONFIG_SENSORS_SMSC47M192=m -# CONFIG_SENSORS_SMSC47B397 is not set -CONFIG_SENSORS_SCH56XX_COMMON=m -CONFIG_SENSORS_SCH5627=m -# CONFIG_SENSORS_SCH5636 is not set -# CONFIG_SENSORS_STTS751 is not set -CONFIG_SENSORS_SMM665=m -# CONFIG_SENSORS_ADC128D818 is not set -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_ADS7871=m -CONFIG_SENSORS_AMC6821=m -# CONFIG_SENSORS_INA209 is not set -# CONFIG_SENSORS_INA2XX is not set -# CONFIG_SENSORS_INA3221 is not set -# CONFIG_SENSORS_TC74 is not set -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_TMP102=m -# CONFIG_SENSORS_TMP103 is not set -# CONFIG_SENSORS_TMP108 is not set -CONFIG_SENSORS_TMP401=m -CONFIG_SENSORS_TMP421=m -CONFIG_SENSORS_TMP513=m -# CONFIG_SENSORS_VEXPRESS is not set -# CONFIG_SENSORS_VIA686A is not set -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -# CONFIG_SENSORS_W83773G is not set -# CONFIG_SENSORS_W83781D is not set -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83795=m -# CONFIG_SENSORS_W83795_FANCTRL is not set -# CONFIG_SENSORS_W83L785TS is not set -CONFIG_SENSORS_W83L786NG=m -# CONFIG_SENSORS_W83627HF is not set -CONFIG_SENSORS_W83627EHF=m -CONFIG_SENSORS_XGENE=m - -# -# ACPI drivers -# -# CONFIG_SENSORS_ACPI_POWER is not set -CONFIG_THERMAL=y -# CONFIG_THERMAL_STATISTICS is not set -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -# CONFIG_THERMAL_WRITABLE_TRIPS is not set -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -# CONFIG_THERMAL_GOV_BANG_BANG is not set -# CONFIG_THERMAL_GOV_USER_SPACE is not set -# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set -CONFIG_CPU_THERMAL=y -CONFIG_CPU_FREQ_THERMAL=y -# CONFIG_CLOCK_THERMAL is not set -# CONFIG_DEVFREQ_THERMAL is not set -# CONFIG_THERMAL_EMULATION is not set -# CONFIG_THERMAL_MMIO is not set -CONFIG_HISI_THERMAL=m -CONFIG_IMX_THERMAL=m -CONFIG_IMX_SC_THERMAL=m -CONFIG_IMX8MM_THERMAL=m -# CONFIG_MAX77620_THERMAL is not set -# CONFIG_QORIQ_THERMAL is not set -CONFIG_SUN8I_THERMAL=m -# CONFIG_ROCKCHIP_THERMAL is not set -CONFIG_ARMADA_THERMAL=m -CONFIG_AMLOGIC_THERMAL=y - -# -# Broadcom thermal drivers -# -CONFIG_BCM2711_THERMAL=m -CONFIG_BCM2835_THERMAL=m -# end of Broadcom thermal drivers - -# -# NVIDIA Tegra thermal drivers -# -CONFIG_TEGRA_SOCTHERM=y -# CONFIG_TEGRA_BPMP_THERMAL is not set -# end of NVIDIA Tegra thermal drivers - -# CONFIG_GENERIC_ADC_THERMAL is not set - -# -# Qualcomm thermal drivers -# -CONFIG_QCOM_TSENS=m -CONFIG_QCOM_SPMI_TEMP_ALARM=m -# end of Qualcomm thermal drivers - -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y -CONFIG_WATCHDOG_OPEN_TIMEOUT=0 -CONFIG_WATCHDOG_SYSFS=y - -# -# Watchdog Pretimeout Governors -# -# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -CONFIG_BD70528_WATCHDOG=m -CONFIG_GPIO_WATCHDOG=m -# CONFIG_WDAT_WDT is not set -# CONFIG_XILINX_WATCHDOG is not set -# CONFIG_ZIIRAVE_WATCHDOG is not set -CONFIG_ARM_SP805_WATCHDOG=m -CONFIG_ARM_SBSA_WATCHDOG=m -# CONFIG_ARMADA_37XX_WATCHDOG is not set -# CONFIG_CADENCE_WATCHDOG is not set -CONFIG_DW_WATCHDOG=m -CONFIG_SUNXI_WATCHDOG=m -# CONFIG_MAX63XX_WATCHDOG is not set -# CONFIG_MAX77620_WATCHDOG is not set -CONFIG_IMX2_WDT=m -CONFIG_IMX_SC_WDT=m -CONFIG_IMX7ULP_WDT=m -CONFIG_TEGRA_WATCHDOG=m -CONFIG_QCOM_WDT=m -CONFIG_MESON_GXBB_WATCHDOG=m -CONFIG_MESON_WATCHDOG=m -CONFIG_PM8916_WATCHDOG=m -# CONFIG_ALIM7101_WDT is not set -# CONFIG_I6300ESB_WDT is not set -CONFIG_BCM2835_WDT=m -# CONFIG_MEN_A21_WDT is not set -CONFIG_XEN_WDT=m - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_SDIOHOST_POSSIBLE=y -CONFIG_SSB_SDIOHOST=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y -# CONFIG_SSB_DRIVER_GPIO is not set -CONFIG_BCMA_POSSIBLE=y -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_PCI=y -# CONFIG_BCMA_HOST_SOC is not set -CONFIG_BCMA_DRIVER_PCI=y -# CONFIG_BCMA_DRIVER_GMAC_CMN is not set -# CONFIG_BCMA_DRIVER_GPIO is not set -# CONFIG_BCMA_DEBUG is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -# CONFIG_MFD_ACT8945A is not set -# CONFIG_MFD_SUN4I_GPADC is not set -# CONFIG_MFD_AS3711 is not set -# CONFIG_MFD_AS3722 is not set -# CONFIG_PMIC_ADP5520 is not set -# CONFIG_MFD_AAT2870_CORE is not set -# CONFIG_MFD_ATMEL_FLEXCOM is not set -# CONFIG_MFD_ATMEL_HLCDC is not set -# CONFIG_MFD_BCM590XX is not set -# CONFIG_MFD_BD9571MWV is not set -# CONFIG_MFD_AC100 is not set -CONFIG_MFD_AXP20X=m -# CONFIG_MFD_AXP20X_I2C is not set -CONFIG_MFD_AXP20X_RSB=m -CONFIG_MFD_CROS_EC_DEV=y -CONFIG_MFD_MADERA=m -CONFIG_MFD_MADERA_I2C=m -CONFIG_MFD_MADERA_SPI=m -# CONFIG_MFD_CS47L15 is not set -# CONFIG_MFD_CS47L35 is not set -# CONFIG_MFD_CS47L85 is not set -# CONFIG_MFD_CS47L90 is not set -# CONFIG_MFD_CS47L92 is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_DA9052_SPI is not set -# CONFIG_MFD_DA9052_I2C is not set -# CONFIG_MFD_DA9055 is not set -# CONFIG_MFD_DA9062 is not set -# CONFIG_MFD_DA9063 is not set -# CONFIG_MFD_DA9150 is not set -# CONFIG_MFD_DLN2 is not set -# CONFIG_MFD_MC13XXX_SPI is not set -# CONFIG_MFD_MC13XXX_I2C is not set -# CONFIG_MFD_HI6421_PMIC is not set -CONFIG_MFD_HI655X_PMIC=m -# CONFIG_HTC_PASIC3 is not set -# CONFIG_HTC_I2CPLD is not set -# CONFIG_LPC_ICH is not set -CONFIG_LPC_SCH=m -CONFIG_MFD_IQS62X=m -# CONFIG_MFD_JANZ_CMODIO is not set -# CONFIG_MFD_KEMPLD is not set -# CONFIG_MFD_88PM800 is not set -# CONFIG_MFD_88PM805 is not set -# CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_MAX14577 is not set -CONFIG_MFD_MAX77620=y -# CONFIG_MFD_MAX77650 is not set -# CONFIG_MFD_MAX77686 is not set -# CONFIG_MFD_MAX77693 is not set -# CONFIG_MFD_MAX77843 is not set -# CONFIG_MFD_MAX8907 is not set -# CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set -# CONFIG_MFD_MAX8998 is not set -# CONFIG_MFD_MT6397 is not set -# CONFIG_MFD_MENF21BMC is not set -# CONFIG_EZX_PCAP is not set -# CONFIG_MFD_CPCAP is not set -CONFIG_MFD_VIPERBOARD=m -# CONFIG_MFD_RETU is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_UCB1400_CORE is not set -CONFIG_MFD_QCOM_RPM=m -CONFIG_MFD_SPMI_PMIC=m -# CONFIG_MFD_RDC321X is not set -# CONFIG_MFD_RT5033 is not set -# CONFIG_MFD_RC5T583 is not set -CONFIG_MFD_RK808=m -# CONFIG_MFD_RN5T618 is not set -# CONFIG_MFD_SEC_CORE is not set -# CONFIG_MFD_SI476X_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SKY81452 is not set -# CONFIG_MFD_SMSC is not set -# CONFIG_ABX500_CORE is not set -# CONFIG_MFD_STMPE is not set -CONFIG_MFD_SUN6I_PRCM=y -CONFIG_MFD_SYSCON=y -# CONFIG_MFD_TI_AM335X_TSCADC is not set -# CONFIG_MFD_LP3943 is not set -# CONFIG_MFD_LP8788 is not set -# CONFIG_MFD_TI_LMU is not set -# CONFIG_MFD_PALMAS is not set -# CONFIG_TPS6105X is not set -# CONFIG_TPS65010 is not set -# CONFIG_TPS6507X is not set -# CONFIG_MFD_TPS65086 is not set -# CONFIG_MFD_TPS65090 is not set -# CONFIG_MFD_TPS65217 is not set -# CONFIG_MFD_TI_LP873X is not set -# CONFIG_MFD_TI_LP87565 is not set -# CONFIG_MFD_TPS65218 is not set -# CONFIG_MFD_TPS6586X is not set -# CONFIG_MFD_TPS65910 is not set -# CONFIG_MFD_TPS65912_I2C is not set -# CONFIG_MFD_TPS65912_SPI is not set -# CONFIG_MFD_TPS80031 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_TWL6040_CORE is not set -# CONFIG_MFD_WL1273_CORE is not set -# CONFIG_MFD_LM3533 is not set -# CONFIG_MFD_TC3589X is not set -# CONFIG_MFD_TQMX86 is not set -# CONFIG_MFD_VX855 is not set -# CONFIG_MFD_LOCHNAGAR is not set -# CONFIG_MFD_ARIZONA_I2C is not set -# CONFIG_MFD_ARIZONA_SPI is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X_I2C is not set -# CONFIG_MFD_WM831X_SPI is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_WM8994 is not set -CONFIG_MFD_ROHM_BD718XX=m -CONFIG_MFD_ROHM_BD70528=m -CONFIG_MFD_ROHM_BD71828=m -# CONFIG_MFD_STPMIC1 is not set -# CONFIG_MFD_STMFX is not set -CONFIG_MFD_VEXPRESS_SYSREG=y -# CONFIG_RAVE_SP_CORE is not set -# end of Multifunction device drivers - -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=m -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_88PG86X is not set -# CONFIG_REGULATOR_ACT8865 is not set -# CONFIG_REGULATOR_AD5398 is not set -# CONFIG_REGULATOR_ANATOP is not set -CONFIG_REGULATOR_ARIZONA_LDO1=m -CONFIG_REGULATOR_ARIZONA_MICSUPP=m -CONFIG_REGULATOR_AXP20X=m -CONFIG_REGULATOR_BD70528=m -CONFIG_REGULATOR_BD71828=m -CONFIG_REGULATOR_BD718XX=m -# CONFIG_REGULATOR_DA9210 is not set -# CONFIG_REGULATOR_DA9211 is not set -CONFIG_REGULATOR_FAN53555=m -CONFIG_REGULATOR_GPIO=m -CONFIG_REGULATOR_HI655X=m -# CONFIG_REGULATOR_ISL9305 is not set -# CONFIG_REGULATOR_ISL6271A is not set -# CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_LP3972 is not set -# CONFIG_REGULATOR_LP872X is not set -# CONFIG_REGULATOR_LP8755 is not set -# CONFIG_REGULATOR_LTC3589 is not set -# CONFIG_REGULATOR_LTC3676 is not set -# CONFIG_REGULATOR_MAX1586 is not set -CONFIG_REGULATOR_MAX77620=m -# CONFIG_REGULATOR_MAX8649 is not set -# CONFIG_REGULATOR_MAX8660 is not set -# CONFIG_REGULATOR_MAX8952 is not set -# CONFIG_REGULATOR_MAX8973 is not set -# CONFIG_REGULATOR_MCP16502 is not set -CONFIG_REGULATOR_MP5416=m -CONFIG_REGULATOR_MP8859=m -CONFIG_REGULATOR_MP886X=m -CONFIG_REGULATOR_MPQ7920=m -# CONFIG_REGULATOR_MT6311 is not set -# CONFIG_REGULATOR_PFUZE100 is not set -# CONFIG_REGULATOR_PV88060 is not set -# CONFIG_REGULATOR_PV88080 is not set -# CONFIG_REGULATOR_PV88090 is not set -CONFIG_REGULATOR_PWM=m -CONFIG_REGULATOR_QCOM_RPM=m -CONFIG_REGULATOR_QCOM_SMD_RPM=m -CONFIG_REGULATOR_QCOM_SPMI=m -CONFIG_REGULATOR_RK808=m -CONFIG_REGULATOR_ROHM=m -CONFIG_REGULATOR_SLG51000=m -CONFIG_REGULATOR_SY8106A=m -CONFIG_REGULATOR_SY8824X=m -# CONFIG_REGULATOR_TPS51632 is not set -# CONFIG_REGULATOR_TPS62360 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set -# CONFIG_REGULATOR_TPS65132 is not set -# CONFIG_REGULATOR_TPS6524X is not set -# CONFIG_REGULATOR_VCTRL is not set -# CONFIG_REGULATOR_VEXPRESS is not set -# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set -CONFIG_CEC_CORE=m -CONFIG_RC_CORE=m -CONFIG_RC_MAP=m -CONFIG_LIRC=y -CONFIG_RC_DECODERS=y -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m -CONFIG_IR_IMON_DECODER=m -CONFIG_IR_RCMM_DECODER=m -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -CONFIG_IR_ENE=m -# CONFIG_IR_HIX5HD2 is not set -CONFIG_IR_IMON=m -CONFIG_IR_IMON_RAW=m -CONFIG_IR_MCEUSB=m -# CONFIG_IR_ITE_CIR is not set -# CONFIG_IR_FINTEK is not set -# CONFIG_IR_MESON is not set -# CONFIG_IR_NUVOTON is not set -CONFIG_IR_REDRAT3=m -# CONFIG_IR_SPI is not set -CONFIG_IR_STREAMZAP=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -CONFIG_RC_LOOPBACK=m -# CONFIG_IR_GPIO_CIR is not set -# CONFIG_IR_GPIO_TX is not set -# CONFIG_IR_PWM_TX is not set -# CONFIG_IR_SUNXI is not set -# CONFIG_IR_SERIAL is not set -# CONFIG_IR_SIR is not set -CONFIG_RC_XBOX_DVD=m -CONFIG_MEDIA_SUPPORT=m - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -# CONFIG_MEDIA_CEC_RC is not set -CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_CONTROLLER_DVB=y -CONFIG_VIDEO_DEV=m -# CONFIG_VIDEO_V4L2_SUBDEV_API is not set -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L2_I2C=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_V4L2_FWNODE=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_DVB_CORE=m -# CONFIG_DVB_MMAP is not set -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=16 -CONFIG_DVB_DYNAMIC_MINORS=y -# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set -# CONFIG_DVB_ULE_DEBUG is not set - -# -# Media drivers -# -CONFIG_MEDIA_USB_SUPPORT=y - -# -# Webcam devices -# -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -# CONFIG_VIDEO_TM6000 is not set - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_CXUSB_ANALOG=y -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -# CONFIG_DVB_USB_ZD1301 is not set -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m - -# -# Webcam, TV (analog/digital) USB devices -# -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# Software defined radio USB devices -# -CONFIG_USB_AIRSPY=m -CONFIG_USB_HACKRF=m -CONFIG_USB_MSI2500=m - -# -# USB HDMI CEC adapters -# -CONFIG_USB_PULSE8_CEC=m -CONFIG_USB_RAINSHADOW_CEC=m -CONFIG_MEDIA_PCI_SUPPORT=y - -# -# Media capture support -# -CONFIG_VIDEO_SOLO6X10=m -CONFIG_VIDEO_TW5864=m -CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_TW686X=m - -# -# Media capture/analog TV support -# -CONFIG_VIDEO_IVTV=m -# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set -CONFIG_VIDEO_IVTV_ALSA=m -CONFIG_VIDEO_FB_IVTV=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DT3155=m - -# -# Media capture/analog/hybrid TV support -# -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CX18_ALSA=m -CONFIG_VIDEO_CX23885=m -CONFIG_MEDIA_ALTERA_CI=m -# CONFIG_VIDEO_CX25821 is not set -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_ENABLE_VP3054=y -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_BT848=m -CONFIG_DVB_BT8XX=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_RC=y -CONFIG_VIDEO_SAA7134_DVB=m -# CONFIG_VIDEO_SAA7134_GO7007 is not set -CONFIG_VIDEO_SAA7164=m - -# -# Media digital TV PCI Adapters -# -CONFIG_DVB_AV7110_IR=y -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set -CONFIG_DVB_PLUTO2=m -CONFIG_DVB_DM1105=m -CONFIG_DVB_PT1=m -CONFIG_DVB_PT3=m -CONFIG_MANTIS_CORE=m -CONFIG_DVB_MANTIS=m -CONFIG_DVB_HOPPER=m -CONFIG_DVB_NGENE=m -CONFIG_DVB_DDBRIDGE=m -# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set -CONFIG_DVB_SMIPCIE=m -CONFIG_DVB_NETUP_UNIDVB=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_VIDEO_CADENCE=y -# CONFIG_VIDEO_ASPEED is not set -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_CODA=m -CONFIG_VIDEO_IMX_PXP=m -# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set -# CONFIG_VIDEO_SH_VEU is not set -# CONFIG_VIDEO_ROCKCHIP_RGA is not set -CONFIG_VIDEO_QCOM_VENUS=m -CONFIG_VIDEO_SUN8I_DEINTERLACE=m -CONFIG_VIDEO_SUN8I_ROTATE=m -CONFIG_V4L_TEST_DRIVERS=y -CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_VIVID_CEC=y -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -# CONFIG_VIDEO_VIM2M is not set -# CONFIG_VIDEO_VICODEC is not set -# CONFIG_DVB_PLATFORM_DRIVERS is not set -# CONFIG_CEC_PLATFORM_DRIVERS is not set -# CONFIG_SDR_PLATFORM_DRIVERS is not set - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_TEA575X=m -CONFIG_RADIO_SI470X=m -CONFIG_USB_SI470X=m -# CONFIG_I2C_SI470X is not set -# CONFIG_RADIO_SI4713 is not set -CONFIG_USB_MR800=m -# CONFIG_USB_DSBR is not set -# CONFIG_RADIO_MAXIRADIO is not set -CONFIG_RADIO_SHARK=m -CONFIG_RADIO_SHARK2=m -CONFIG_USB_KEENE=m -CONFIG_USB_RAREMONO=m -CONFIG_USB_MA901=m -# CONFIG_RADIO_TEA5764 is not set -# CONFIG_RADIO_SAA7706H is not set -# CONFIG_RADIO_TEF6862 is not set -# CONFIG_RADIO_WL1273 is not set - -# -# Texas Instruments WL128x FM driver (ST based) -# -# CONFIG_RADIO_WL128X is not set -# end of Texas Instruments WL128x FM driver (ST based) - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_V4L2=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -# CONFIG_SMS_SIANO_DEBUGFS is not set -CONFIG_VIDEO_V4L2_TPG=m - -# -# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=m - -# -# I2C Encoders, decoders, sensors and other helper chips -# - -# -# Audio decoders, processors and mixers -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS3308=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_TLV320AIC23B=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m -CONFIG_VIDEO_SONY_BTF_MPX=m - -# -# RDS decoders -# -CONFIG_VIDEO_SAA6588=m - -# -# Video decoders -# -CONFIG_VIDEO_ADV7183=m -CONFIG_VIDEO_BT819=m -CONFIG_VIDEO_BT856=m -CONFIG_VIDEO_BT866=m -CONFIG_VIDEO_KS0127=m -CONFIG_VIDEO_ML86V7667=m -CONFIG_VIDEO_SAA7110=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TVP514X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TVP7002=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m -CONFIG_VIDEO_TW9910=m -CONFIG_VIDEO_VPX3220=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_CX25840=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m -CONFIG_VIDEO_SAA7185=m -CONFIG_VIDEO_ADV7170=m -CONFIG_VIDEO_ADV7175=m -CONFIG_VIDEO_ADV7343=m -CONFIG_VIDEO_ADV7393=m -CONFIG_VIDEO_AK881X=m -CONFIG_VIDEO_THS8200=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV2659=m -CONFIG_VIDEO_OV2680=m -CONFIG_VIDEO_OV2685=m -CONFIG_VIDEO_OV6650=m -CONFIG_VIDEO_OV5695=m -CONFIG_VIDEO_OV772X=m -CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_OV7740=m -CONFIG_VIDEO_OV9640=m -CONFIG_VIDEO_VS6624=m -CONFIG_VIDEO_MT9M111=m -CONFIG_VIDEO_MT9T112=m -CONFIG_VIDEO_MT9V011=m -CONFIG_VIDEO_MT9V111=m -CONFIG_VIDEO_SR030PC30=m -CONFIG_VIDEO_RJ54N1=m - -# -# Lens drivers -# -CONFIG_VIDEO_AD5820=m - -# -# Flash devices -# -CONFIG_VIDEO_ADP1653=m -CONFIG_VIDEO_LM3560=m -CONFIG_VIDEO_LM3646=m - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m - -# -# Audio/Video compression chips -# -CONFIG_VIDEO_SAA6752HS=m - -# -# SDR tuner chips -# -CONFIG_SDR_MAX2175=m - -# -# Miscellaneous helper chips -# -CONFIG_VIDEO_THS7303=m -CONFIG_VIDEO_M52790=m -CONFIG_VIDEO_I2C=m -# end of I2C Encoders, decoders, sensors and other helper chips - -# -# SPI helper chips -# -# end of SPI helper chips - -# -# Media SPI Adapters -# -CONFIG_CXD2880_SPI_DRV=m -# end of Media SPI Adapters - -CONFIG_MEDIA_TUNER=m - -# -# Customize TV tuners -# -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA18250=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_XC4000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=m -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_M88RS6000T=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_MXL301RF=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m -CONFIG_MEDIA_TUNER_QM1D1B0004=m -# end of Customize TV tuners - -# -# Customise DVB Frontends -# - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV0910=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_STV6111=m -CONFIG_DVB_MXL5XX=m -CONFIG_DVB_M88DS3103=m - -# -# Multistandard (cable + terrestrial) frontends -# -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10036=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24117=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_MB86A16=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_S5H1432=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_DIB9000=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_STV0367=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_CXD2841ER=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_RTL2832_SDR=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_ZD1301_DEMOD=m -CONFIG_DVB_GP8PSK_FE=m -CONFIG_DVB_CXD2880=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m -CONFIG_DVB_MN88443X=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBH25=m -CONFIG_DVB_LNBH29=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_LGS8GL5=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_TDA665x=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m -CONFIG_DVB_HORUS3A=m -CONFIG_DVB_ASCOT2E=m -CONFIG_DVB_HELENE=m - -# -# Common Interface (EN50221) controller drivers -# -CONFIG_DVB_CXD2099=m -CONFIG_DVB_SP2=m - -# -# Tools to develop new frontends -# -CONFIG_DVB_DUMMY_FE=m -# end of Customise DVB Frontends - -# -# Graphics support -# -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_TEGRA_HOST1X=m -CONFIG_TEGRA_HOST1X_FIREWALL=y -CONFIG_DRM=m -CONFIG_DRM_MIPI_DBI=m -CONFIG_DRM_MIPI_DSI=y -CONFIG_DRM_DP_AUX_CHARDEV=y -# CONFIG_DRM_DEBUG_SELFTEST is not set -CONFIG_DRM_KMS_HELPER=m -CONFIG_DRM_KMS_FB_HELPER=y -# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set -CONFIG_DRM_LOAD_EDID_FIRMWARE=y -# CONFIG_DRM_DP_CEC is not set -CONFIG_DRM_TTM=m -CONFIG_DRM_TTM_DMA_PAGE_POOL=y -CONFIG_DRM_VRAM_HELPER=m -CONFIG_DRM_TTM_HELPER=m -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y -CONFIG_DRM_GEM_SHMEM_HELPER=y -CONFIG_DRM_VM=y -CONFIG_DRM_SCHED=m - -# -# I2C encoder or helper chips -# -# CONFIG_DRM_I2C_CH7006 is not set -# CONFIG_DRM_I2C_SIL164 is not set -# CONFIG_DRM_I2C_NXP_TDA998X is not set -# CONFIG_DRM_I2C_NXP_TDA9950 is not set -# end of I2C encoder or helper chips - -# -# ARM devices -# -CONFIG_DRM_HDLCD=m -# CONFIG_DRM_HDLCD_SHOW_UNDERRUN is not set -CONFIG_DRM_MALI_DISPLAY=m -CONFIG_DRM_KOMEDA=m -# end of ARM devices - -CONFIG_DRM_RADEON=m -# CONFIG_DRM_RADEON_USERPTR is not set -CONFIG_DRM_AMDGPU=m -CONFIG_DRM_AMDGPU_SI=y -CONFIG_DRM_AMDGPU_CIK=y -CONFIG_DRM_AMDGPU_USERPTR=y -# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set - -# -# ACP (Audio CoProcessor) Configuration -# -# CONFIG_DRM_AMD_ACP is not set -# end of ACP (Audio CoProcessor) Configuration - -# -# Display Engine Configuration -# -CONFIG_DRM_AMD_DC=y -# CONFIG_DRM_AMD_DC_HDCP is not set -# CONFIG_DEBUG_KERNEL_DC is not set -# end of Display Engine Configuration - -# CONFIG_HSA_AMD is not set -CONFIG_DRM_NOUVEAU=m -# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set -CONFIG_NOUVEAU_PLATFORM_DRIVER=y -CONFIG_NOUVEAU_DEBUG=5 -CONFIG_NOUVEAU_DEBUG_DEFAULT=3 -# CONFIG_NOUVEAU_DEBUG_MMU is not set -CONFIG_DRM_NOUVEAU_BACKLIGHT=y -CONFIG_DRM_VGEM=m -# CONFIG_DRM_VKMS is not set -CONFIG_DRM_UDL=m -CONFIG_DRM_AST=m -# CONFIG_DRM_MGAG200 is not set -CONFIG_DRM_CIRRUS_QEMU=m -# CONFIG_DRM_RCAR_DW_HDMI is not set -# CONFIG_DRM_RCAR_LVDS is not set -CONFIG_DRM_RCAR_WRITEBACK=y -# CONFIG_DRM_SUN4I is not set -CONFIG_DRM_QXL=m -CONFIG_DRM_BOCHS=m -CONFIG_DRM_VIRTIO_GPU=m -CONFIG_DRM_MSM=m -CONFIG_DRM_MSM_GPU_STATE=y -# CONFIG_DRM_MSM_REGISTER_LOGGING is not set -# CONFIG_DRM_MSM_GPU_SUDO is not set -CONFIG_DRM_MSM_HDMI_HDCP=y -CONFIG_DRM_MSM_DSI=y -CONFIG_DRM_MSM_DSI_PLL=y -CONFIG_DRM_MSM_DSI_28NM_PHY=y -CONFIG_DRM_MSM_DSI_20NM_PHY=y -CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y -CONFIG_DRM_MSM_DSI_14NM_PHY=y -CONFIG_DRM_MSM_DSI_10NM_PHY=y -CONFIG_DRM_TEGRA=m -# CONFIG_DRM_TEGRA_DEBUG is not set -CONFIG_DRM_TEGRA_STAGING=y -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -CONFIG_DRM_PANEL_ARM_VERSATILE=m -CONFIG_DRM_PANEL_BOE_HIMAX8279D=m -CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m -# CONFIG_DRM_PANEL_LVDS is not set -CONFIG_DRM_PANEL_SIMPLE=m -CONFIG_DRM_PANEL_ELIDA_KD35T133=m -CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=m -# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set -# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set -# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set -# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set -# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set -# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set -CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=m -# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set -# CONFIG_DRM_PANEL_LG_LB035Q02 is not set -# CONFIG_DRM_PANEL_LG_LG4573 is not set -# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set -CONFIG_DRM_PANEL_NOVATEK_NT35510=m -# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set -# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set -# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set -CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m -# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set -# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set -# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set -# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set -# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set -# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set -CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=m -# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set -# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set -# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set -# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set -# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set -CONFIG_DRM_PANEL_SONY_ACX424AKP=m -# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set -# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set -# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set -# CONFIG_DRM_PANEL_TPO_TPG110 is not set -# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set -CONFIG_DRM_PANEL_XINPENG_XPP055C272=m -# end of Display Panels - -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_PANEL_BRIDGE=y - -# -# Display Interface Bridges -# -CONFIG_DRM_CDNS_DSI=m -CONFIG_DRM_DISPLAY_CONNECTOR=m -CONFIG_DRM_LVDS_CODEC=m -# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set -# CONFIG_DRM_NXP_PTN3460 is not set -# CONFIG_DRM_PARADE_PS8622 is not set -CONFIG_DRM_PARADE_PS8640=m -# CONFIG_DRM_SIL_SII8620 is not set -# CONFIG_DRM_SII902X is not set -# CONFIG_DRM_SII9234 is not set -CONFIG_DRM_SIMPLE_BRIDGE=m -# CONFIG_DRM_THINE_THC63LVD1024 is not set -# CONFIG_DRM_TOSHIBA_TC358764 is not set -# CONFIG_DRM_TOSHIBA_TC358767 is not set -# CONFIG_DRM_TOSHIBA_TC358768 is not set -# CONFIG_DRM_TI_TFP410 is not set -# CONFIG_DRM_TI_SN65DSI86 is not set -CONFIG_DRM_TI_TPD12S015=m -CONFIG_DRM_ANALOGIX_ANX6345=m -# CONFIG_DRM_ANALOGIX_ANX78XX is not set -CONFIG_DRM_ANALOGIX_DP=m -CONFIG_DRM_I2C_ADV7511=m -CONFIG_DRM_I2C_ADV7511_AUDIO=y -CONFIG_DRM_I2C_ADV7511_CEC=y -CONFIG_DRM_DW_HDMI=m -# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set -# CONFIG_DRM_DW_HDMI_I2S_AUDIO is not set -# CONFIG_DRM_DW_HDMI_CEC is not set -# end of Display Interface Bridges - -CONFIG_DRM_VC4=m -# CONFIG_DRM_VC4_HDMI_CEC is not set -CONFIG_DRM_ETNAVIV=m -CONFIG_DRM_ETNAVIV_THERMAL=y -# CONFIG_DRM_ARCPGU is not set -CONFIG_DRM_HISI_HIBMC=m -CONFIG_DRM_HISI_KIRIN=m -# CONFIG_DRM_MXSFB is not set -CONFIG_DRM_MESON=m -CONFIG_DRM_MESON_DW_HDMI=m -CONFIG_DRM_GM12U320=m -# CONFIG_TINYDRM_HX8357D is not set -# CONFIG_TINYDRM_ILI9225 is not set -# CONFIG_TINYDRM_ILI9341 is not set -CONFIG_TINYDRM_ILI9486=m -# CONFIG_TINYDRM_MI0283QT is not set -# CONFIG_TINYDRM_REPAPER is not set -# CONFIG_TINYDRM_ST7586 is not set -# CONFIG_TINYDRM_ST7735R is not set -# CONFIG_DRM_PL111 is not set -# CONFIG_DRM_XEN is not set -CONFIG_DRM_LIMA=m -CONFIG_DRM_PANFROST=m -CONFIG_DRM_TIDSS=m -CONFIG_DRM_LEGACY=y -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_MGA is not set -CONFIG_DRM_VIA=m -CONFIG_DRM_SAVAGE=m -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y - -# -# Frame buffer Devices -# -CONFIG_FB_CMDLINE=y -CONFIG_FB_NOTIFY=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_DDC=m -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_IMAGEBLIT=y -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=y -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_SVGALIB=m -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -CONFIG_FB_ARMCLCD=y -CONFIG_FB_IMX=m -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_UVESA is not set -CONFIG_FB_EFI=y -# CONFIG_FB_OPENCORES is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I740 is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -CONFIG_FB_S3=m -CONFIG_FB_S3_DDC=y -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=m -# CONFIG_FB_3DFX_ACCEL is not set -CONFIG_FB_3DFX_I2C=y -# CONFIG_FB_VOODOO1 is not set -CONFIG_FB_VT8623=m -# CONFIG_FB_TRIDENT is not set -CONFIG_FB_ARK=m -CONFIG_FB_PM3=m -# CONFIG_FB_CARMINE is not set -CONFIG_FB_SMSCUFX=m -CONFIG_FB_UDL=m -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_XEN_FBDEV_FRONTEND=y -# CONFIG_FB_METRONOME is not set -CONFIG_FB_MB862XX=m -CONFIG_FB_MB862XX_PCI_GDC=y -CONFIG_FB_MB862XX_I2C=y -# CONFIG_FB_MX3 is not set -CONFIG_FB_SIMPLE=y -# CONFIG_FB_SSD1307 is not set -# CONFIG_FB_SM712 is not set -# end of Frame buffer Devices - -# -# Backlight & LCD device support -# -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_L4F00242T03=m -CONFIG_LCD_LMS283GF05=m -CONFIG_LCD_LTV350QV=m -CONFIG_LCD_ILI922X=m -CONFIG_LCD_ILI9320=m -CONFIG_LCD_TDO24M=m -CONFIG_LCD_VGG2432A4=m -CONFIG_LCD_PLATFORM=m -CONFIG_LCD_AMS369FG06=m -CONFIG_LCD_LMS501KF03=m -CONFIG_LCD_HX8357=m -CONFIG_LCD_OTM3225A=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m -CONFIG_BACKLIGHT_PWM=m -CONFIG_BACKLIGHT_QCOM_WLED=m -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -# CONFIG_BACKLIGHT_LM3630A is not set -# CONFIG_BACKLIGHT_LM3639 is not set -CONFIG_BACKLIGHT_LP855X=m -# CONFIG_BACKLIGHT_GPIO is not set -# CONFIG_BACKLIGHT_LV5207LP is not set -# CONFIG_BACKLIGHT_BD6107 is not set -# CONFIG_BACKLIGHT_ARCXCNN is not set -CONFIG_BACKLIGHT_LED=m -# end of Backlight & LCD device support - -CONFIG_VGASTATE=m -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_DUMMY_CONSOLE_COLUMNS=80 -CONFIG_DUMMY_CONSOLE_ROWS=25 -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set -# end of Console display driver support - -# CONFIG_LOGO is not set -# end of Graphics support - -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_SEQ_DEVICE=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_COMPRESS_OFFLOAD=m -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_SEQUENCER_OSS is not set -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -CONFIG_SND_SEQ_MIDI_EVENT=m -CONFIG_SND_SEQ_MIDI=m -CONFIG_SND_SEQ_MIDI_EMUL=m -CONFIG_SND_SEQ_VIRMIDI=m -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_OPL3_LIB_SEQ=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -CONFIG_SND_ALOOP=m -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -CONFIG_SND_MTS64=m -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -CONFIG_SND_ALS300=m -CONFIG_SND_ALI5451=m -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -CONFIG_SND_AZT3328=m -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -CONFIG_SND_CTXFI=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_INDIGOIOX=m -CONFIG_SND_INDIGODJX=m -CONFIG_SND_EMU10K1=m -CONFIG_SND_EMU10K1_SEQ=m -CONFIG_SND_EMU10K1X=m -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -CONFIG_SND_ES1938=m -CONFIG_SND_ES1968=m -CONFIG_SND_ES1968_INPUT=y -CONFIG_SND_ES1968_RADIO=y -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDSP is not set -CONFIG_SND_HDSPM=m -CONFIG_SND_ICE1712=m -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -CONFIG_SND_LOLA=m -CONFIG_SND_LX6464ES=m -CONFIG_SND_MAESTRO3=m -CONFIG_SND_MAESTRO3_INPUT=y -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -CONFIG_SND_SONICVIBES=m -CONFIG_SND_TRIDENT=m -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -CONFIG_SND_VIRTUOSO=m -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set - -# -# HD-Audio -# -CONFIG_SND_HDA=m -CONFIG_SND_HDA_INTEL=m -CONFIG_SND_HDA_TEGRA=m -CONFIG_SND_HDA_HWDEP=y -CONFIG_SND_HDA_RECONFIG=y -CONFIG_SND_HDA_INPUT_BEEP=y -CONFIG_SND_HDA_INPUT_BEEP_MODE=1 -CONFIG_SND_HDA_PATCH_LOADER=y -CONFIG_SND_HDA_CODEC_REALTEK=m -CONFIG_SND_HDA_CODEC_ANALOG=m -CONFIG_SND_HDA_CODEC_SIGMATEL=m -CONFIG_SND_HDA_CODEC_VIA=m -CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_HDA_CODEC_CIRRUS=m -CONFIG_SND_HDA_CODEC_CONEXANT=m -CONFIG_SND_HDA_CODEC_CA0110=m -CONFIG_SND_HDA_CODEC_CA0132=m -CONFIG_SND_HDA_CODEC_CA0132_DSP=y -CONFIG_SND_HDA_CODEC_CMEDIA=m -CONFIG_SND_HDA_CODEC_SI3054=m -CONFIG_SND_HDA_GENERIC=m -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -# end of HD-Audio - -CONFIG_SND_HDA_CORE=m -CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_ALIGNED_MMIO=y -CONFIG_SND_HDA_COMPONENT=y -CONFIG_SND_HDA_PREALLOC_SIZE=2048 -CONFIG_SND_INTEL_NHLT=y -CONFIG_SND_INTEL_DSP_CONFIG=m -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_FIREWIRE=y -CONFIG_SND_FIREWIRE_LIB=m -CONFIG_SND_DICE=m -CONFIG_SND_OXFW=m -CONFIG_SND_ISIGHT=m -CONFIG_SND_FIREWORKS=m -CONFIG_SND_BEBOB=m -CONFIG_SND_FIREWIRE_DIGI00X=m -CONFIG_SND_FIREWIRE_TASCAM=m -# CONFIG_SND_FIREWIRE_MOTU is not set -# CONFIG_SND_FIREFACE is not set -CONFIG_SND_SOC=m -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -CONFIG_SND_SOC_COMPRESS=y -# CONFIG_SND_SOC_AMD_ACP is not set -# CONFIG_SND_ATMEL_SOC is not set -CONFIG_SND_BCM2835_SOC_I2S=m -CONFIG_SND_BCM63XX_I2S_WHISTLER=m -# CONFIG_SND_DESIGNWARE_I2S is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -# CONFIG_SND_SOC_FSL_ASRC is not set -CONFIG_SND_SOC_FSL_SAI=m -CONFIG_SND_SOC_FSL_MQS=m -CONFIG_SND_SOC_FSL_AUDMIX=m -CONFIG_SND_SOC_FSL_SSI=m -CONFIG_SND_SOC_FSL_SPDIF=m -CONFIG_SND_SOC_FSL_ESAI=m -CONFIG_SND_SOC_FSL_MICFIL=m -CONFIG_SND_SOC_IMX_PCM_DMA=m -CONFIG_SND_SOC_IMX_AUDMUX=m -CONFIG_SND_IMX_SOC=m - -# -# SoC Audio support for Freescale i.MX boards: -# -CONFIG_SND_SOC_IMX_ES8328=m -CONFIG_SND_SOC_IMX_SGTL5000=m -CONFIG_SND_SOC_IMX_SPDIF=m -CONFIG_SND_SOC_FSL_ASOC_CARD=m -CONFIG_SND_SOC_IMX_AUDMIX=m -# end of SoC Audio for Freescale CPUs - -CONFIG_SND_I2S_HI6210_I2S=m -# CONFIG_SND_KIRKWOOD_SOC is not set -# CONFIG_SND_SOC_IMG is not set -# CONFIG_SND_SOC_MTK_BTCVSD is not set - -# -# ASoC support for Amlogic platforms -# -CONFIG_SND_MESON_AIU=m -# CONFIG_SND_MESON_AXG_FRDDR is not set -# CONFIG_SND_MESON_AXG_TODDR is not set -# CONFIG_SND_MESON_AXG_TDMIN is not set -# CONFIG_SND_MESON_AXG_TDMOUT is not set -# CONFIG_SND_MESON_AXG_SOUND_CARD is not set -# CONFIG_SND_MESON_AXG_SPDIFOUT is not set -# CONFIG_SND_MESON_AXG_SPDIFIN is not set -# CONFIG_SND_MESON_AXG_PDM is not set -CONFIG_SND_MESON_CODEC_GLUE=m -# CONFIG_SND_MESON_GX_SOUND_CARD is not set -# CONFIG_SND_MESON_G12A_TOACODEC is not set -# CONFIG_SND_MESON_G12A_TOHDMITX is not set -CONFIG_SND_SOC_MESON_T9015=m -# end of ASoC support for Amlogic platforms - -CONFIG_SND_SOC_QCOM=m -CONFIG_SND_SOC_LPASS_CPU=m -CONFIG_SND_SOC_LPASS_PLATFORM=m -CONFIG_SND_SOC_LPASS_APQ8016=m -# CONFIG_SND_SOC_STORM is not set -CONFIG_SND_SOC_APQ8016_SBC=m -CONFIG_SND_SOC_QCOM_COMMON=m -CONFIG_SND_SOC_QDSP6_COMMON=m -CONFIG_SND_SOC_QDSP6_CORE=m -CONFIG_SND_SOC_QDSP6_AFE=m -CONFIG_SND_SOC_QDSP6_AFE_DAI=m -CONFIG_SND_SOC_QDSP6_ADM=m -CONFIG_SND_SOC_QDSP6_ROUTING=m -CONFIG_SND_SOC_QDSP6_ASM=m -CONFIG_SND_SOC_QDSP6_ASM_DAI=m -CONFIG_SND_SOC_QDSP6=m -CONFIG_SND_SOC_MSM8996=m -# CONFIG_SND_SOC_ROCKCHIP is not set -# CONFIG_SND_SOC_SOF_TOPLEVEL is not set - -# -# STMicroelectronics STM32 SOC audio support -# -# end of STMicroelectronics STM32 SOC audio support - -# -# Allwinner SoC Audio support -# -# CONFIG_SND_SUN4I_CODEC is not set -# CONFIG_SND_SUN8I_CODEC is not set -# CONFIG_SND_SUN8I_CODEC_ANALOG is not set -# CONFIG_SND_SUN50I_CODEC_ANALOG is not set -# CONFIG_SND_SUN4I_I2S is not set -# CONFIG_SND_SUN4I_SPDIF is not set -# end of Allwinner SoC Audio support - -CONFIG_SND_SOC_TEGRA=m -# CONFIG_SND_SOC_TEGRA20_AC97 is not set -# CONFIG_SND_SOC_TEGRA20_DAS is not set -# CONFIG_SND_SOC_TEGRA20_I2S is not set -CONFIG_SND_SOC_TEGRA20_SPDIF=m -# CONFIG_SND_SOC_TEGRA30_AHUB is not set -# CONFIG_SND_SOC_TEGRA30_I2S is not set -CONFIG_SND_SOC_TEGRA_RT5640=m -CONFIG_SND_SOC_TEGRA_WM8753=m -CONFIG_SND_SOC_TEGRA_WM8903=m -# CONFIG_SND_SOC_TEGRA_WM9712 is not set -CONFIG_SND_SOC_TEGRA_TRIMSLICE=m -CONFIG_SND_SOC_TEGRA_ALC5632=m -CONFIG_SND_SOC_TEGRA_MAX98090=m -CONFIG_SND_SOC_TEGRA_RT5677=m -# CONFIG_SND_SOC_TEGRA_SGTL5000 is not set -CONFIG_SND_SOC_XILINX_I2S=m -# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set -# CONFIG_SND_SOC_XILINX_SPDIF is not set -# CONFIG_SND_SOC_XTFPGA_I2S is not set -# CONFIG_ZX_TDM is not set -CONFIG_SND_SOC_I2C_AND_SPI=m - -# -# CODEC drivers -# -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_ADAU1701 is not set -# CONFIG_SND_SOC_ADAU1761_I2C is not set -# CONFIG_SND_SOC_ADAU1761_SPI is not set -# CONFIG_SND_SOC_ADAU7002 is not set -CONFIG_SND_SOC_ADAU7118=m -CONFIG_SND_SOC_ADAU7118_HW=m -CONFIG_SND_SOC_ADAU7118_I2C=m -# CONFIG_SND_SOC_AK4104 is not set -# CONFIG_SND_SOC_AK4118 is not set -# CONFIG_SND_SOC_AK4458 is not set -# CONFIG_SND_SOC_AK4554 is not set -# CONFIG_SND_SOC_AK4613 is not set -# CONFIG_SND_SOC_AK4642 is not set -# CONFIG_SND_SOC_AK5386 is not set -# CONFIG_SND_SOC_AK5558 is not set -# CONFIG_SND_SOC_ALC5623 is not set -CONFIG_SND_SOC_ALC5632=m -# CONFIG_SND_SOC_BD28623 is not set -# CONFIG_SND_SOC_BT_SCO is not set -CONFIG_SND_SOC_CROS_EC_CODEC=m -# CONFIG_SND_SOC_CS35L32 is not set -# CONFIG_SND_SOC_CS35L33 is not set -# CONFIG_SND_SOC_CS35L34 is not set -# CONFIG_SND_SOC_CS35L35 is not set -# CONFIG_SND_SOC_CS35L36 is not set -# CONFIG_SND_SOC_CS42L42 is not set -# CONFIG_SND_SOC_CS42L51_I2C is not set -# CONFIG_SND_SOC_CS42L52 is not set -# CONFIG_SND_SOC_CS42L56 is not set -# CONFIG_SND_SOC_CS42L73 is not set -# CONFIG_SND_SOC_CS4265 is not set -# CONFIG_SND_SOC_CS4270 is not set -# CONFIG_SND_SOC_CS4271_I2C is not set -# CONFIG_SND_SOC_CS4271_SPI is not set -# CONFIG_SND_SOC_CS42XX8_I2C is not set -# CONFIG_SND_SOC_CS43130 is not set -# CONFIG_SND_SOC_CS4341 is not set -# CONFIG_SND_SOC_CS4349 is not set -# CONFIG_SND_SOC_CS53L30 is not set -# CONFIG_SND_SOC_CX2072X is not set -# CONFIG_SND_SOC_DA7213 is not set -# CONFIG_SND_SOC_DMIC is not set -CONFIG_SND_SOC_HDMI_CODEC=m -# CONFIG_SND_SOC_ES7134 is not set -# CONFIG_SND_SOC_ES7241 is not set -# CONFIG_SND_SOC_ES8316 is not set -CONFIG_SND_SOC_ES8328=m -CONFIG_SND_SOC_ES8328_I2C=m -CONFIG_SND_SOC_ES8328_SPI=m -# CONFIG_SND_SOC_GTM601 is not set -# CONFIG_SND_SOC_INNO_RK3036 is not set -# CONFIG_SND_SOC_MAX98088 is not set -CONFIG_SND_SOC_MAX98090=m -# CONFIG_SND_SOC_MAX98357A is not set -# CONFIG_SND_SOC_MAX98504 is not set -# CONFIG_SND_SOC_MAX9867 is not set -CONFIG_SND_SOC_MAX98927=m -# CONFIG_SND_SOC_MAX98373 is not set -# CONFIG_SND_SOC_MAX9860 is not set -# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set -# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set -# CONFIG_SND_SOC_PCM1681 is not set -# CONFIG_SND_SOC_PCM1789_I2C is not set -# CONFIG_SND_SOC_PCM179X_I2C is not set -# CONFIG_SND_SOC_PCM179X_SPI is not set -# CONFIG_SND_SOC_PCM186X_I2C is not set -# CONFIG_SND_SOC_PCM186X_SPI is not set -# CONFIG_SND_SOC_PCM3060_I2C is not set -# CONFIG_SND_SOC_PCM3060_SPI is not set -# CONFIG_SND_SOC_PCM3168A_I2C is not set -# CONFIG_SND_SOC_PCM3168A_SPI is not set -# CONFIG_SND_SOC_PCM512x_I2C is not set -# CONFIG_SND_SOC_PCM512x_SPI is not set -CONFIG_SND_SOC_RK3328=m -CONFIG_SND_SOC_RL6231=m -# CONFIG_SND_SOC_RT5616 is not set -# CONFIG_SND_SOC_RT5631 is not set -CONFIG_SND_SOC_RT5640=m -CONFIG_SND_SOC_RT5677=m -CONFIG_SND_SOC_RT5677_SPI=m -CONFIG_SND_SOC_SGTL5000=m -# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set -# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set -# CONFIG_SND_SOC_SPDIF is not set -# CONFIG_SND_SOC_SSM2305 is not set -# CONFIG_SND_SOC_SSM2602_SPI is not set -# CONFIG_SND_SOC_SSM2602_I2C is not set -# CONFIG_SND_SOC_SSM4567 is not set -# CONFIG_SND_SOC_STA32X is not set -# CONFIG_SND_SOC_STA350 is not set -# CONFIG_SND_SOC_STI_SAS is not set -# CONFIG_SND_SOC_TAS2552 is not set -# CONFIG_SND_SOC_TAS2562 is not set -# CONFIG_SND_SOC_TAS2770 is not set -# CONFIG_SND_SOC_TAS5086 is not set -# CONFIG_SND_SOC_TAS571X is not set -# CONFIG_SND_SOC_TAS5720 is not set -# CONFIG_SND_SOC_TAS6424 is not set -# CONFIG_SND_SOC_TDA7419 is not set -# CONFIG_SND_SOC_TFA9879 is not set -CONFIG_SND_SOC_TLV320AIC23=m -CONFIG_SND_SOC_TLV320AIC23_I2C=m -# CONFIG_SND_SOC_TLV320AIC23_SPI is not set -# CONFIG_SND_SOC_TLV320AIC31XX is not set -# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set -# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set -# CONFIG_SND_SOC_TLV320AIC3X is not set -# CONFIG_SND_SOC_TLV320ADCX140 is not set -# CONFIG_SND_SOC_TS3A227E is not set -# CONFIG_SND_SOC_TSCS42XX is not set -# CONFIG_SND_SOC_TSCS454 is not set -# CONFIG_SND_SOC_UDA1334 is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8523 is not set -# CONFIG_SND_SOC_WM8524 is not set -# CONFIG_SND_SOC_WM8580 is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8728 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8737 is not set -# CONFIG_SND_SOC_WM8741 is not set -# CONFIG_SND_SOC_WM8750 is not set -CONFIG_SND_SOC_WM8753=m -# CONFIG_SND_SOC_WM8770 is not set -# CONFIG_SND_SOC_WM8776 is not set -# CONFIG_SND_SOC_WM8782 is not set -# CONFIG_SND_SOC_WM8804_I2C is not set -# CONFIG_SND_SOC_WM8804_SPI is not set -CONFIG_SND_SOC_WM8903=m -CONFIG_SND_SOC_WM8904=m -# CONFIG_SND_SOC_WM8960 is not set -# CONFIG_SND_SOC_WM8962 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM8978 is not set -# CONFIG_SND_SOC_WM8985 is not set -# CONFIG_SND_SOC_ZX_AUD96P22 is not set -# CONFIG_SND_SOC_MAX9759 is not set -# CONFIG_SND_SOC_MT6351 is not set -# CONFIG_SND_SOC_MT6358 is not set -# CONFIG_SND_SOC_MT6660 is not set -# CONFIG_SND_SOC_NAU8540 is not set -# CONFIG_SND_SOC_NAU8810 is not set -# CONFIG_SND_SOC_NAU8822 is not set -# CONFIG_SND_SOC_NAU8824 is not set -# CONFIG_SND_SOC_TPA6130A2 is not set -# end of CODEC drivers - -# CONFIG_SND_SIMPLE_CARD is not set -# CONFIG_SND_AUDIO_GRAPH_CARD is not set -CONFIG_SND_SYNTH_EMUX=m -# CONFIG_SND_XEN_FRONTEND is not set -CONFIG_AC97_BUS=m - -# -# HID support -# -CONFIG_HID=m -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=m -CONFIG_HID_GENERIC=m - -# -# Special HID drivers -# -CONFIG_HID_A4TECH=m -# CONFIG_HID_ACCUTOUCH is not set -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -# CONFIG_HID_APPLEIR is not set -CONFIG_HID_ASUS=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -# CONFIG_HID_BIGBEN_FF is not set -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_COUGAR=m -CONFIG_HID_MACALLY=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CMEDIA=m -CONFIG_HID_CP2112=m -CONFIG_HID_CREATIVE_SB0540=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -# CONFIG_HID_ELAN is not set -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -# CONFIG_HID_GFRM is not set -CONFIG_HID_GLORIOUS=m -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -# CONFIG_HID_GOOGLE_HAMMER is not set -# CONFIG_HID_GT683R is not set -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -# CONFIG_HID_VIEWSONIC is not set -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m -# CONFIG_HID_ITE is not set -# CONFIG_HID_JABRA is not set -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LCPOWER=m -CONFIG_HID_LED=m -CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MALTRON=m -# CONFIG_HID_MAYFLASH is not set -# CONFIG_HID_REDRAGON is not set -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -# CONFIG_HID_NTI is not set -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -# CONFIG_HID_PICOLCD_LCD is not set -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -# CONFIG_HID_RETRODE is not set -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -# CONFIG_HID_STEAM is not set -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -# CONFIG_HID_UDRAW_PS3 is not set -CONFIG_HID_U2FZERO=m -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m -CONFIG_HID_ALPS=m -CONFIG_HID_MCP2221=m -# end of Special HID drivers - -# -# USB HID support -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# end of USB HID Boot Protocol drivers -# end of USB HID support - -# -# I2C HID support -# -# CONFIG_I2C_HID is not set -# end of I2C HID support -# end of HID support - -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_USB_CONN_GPIO=m -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=m -CONFIG_USB_PCI=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_LEDS_TRIGGER_USBPORT=m -CONFIG_USB_AUTOSUSPEND_DELAY=2 -CONFIG_USB_MON=m - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_XHCI_HCD=m -# CONFIG_USB_XHCI_DBGCAP is not set -CONFIG_USB_XHCI_PCI=m -CONFIG_USB_XHCI_PLATFORM=m -CONFIG_USB_XHCI_HISTB=m -# CONFIG_USB_XHCI_MVEBU is not set -CONFIG_USB_XHCI_TEGRA=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=m -CONFIG_USB_EHCI_FSL=m -CONFIG_USB_EHCI_MXC=m -CONFIG_USB_EHCI_HCD_ORION=m -CONFIG_USB_EHCI_TEGRA=m -CONFIG_USB_EHCI_HCD_PLATFORM=m -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_FOTG210_HCD is not set -# CONFIG_USB_MAX3421_HCD is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_PCI=m -# CONFIG_USB_OHCI_HCD_SSB is not set -CONFIG_USB_OHCI_HCD_PLATFORM=m -# CONFIG_USB_UHCI_HCD is not set -CONFIG_USB_U132_HCD=m -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_HCD_BCMA is not set -# CONFIG_USB_HCD_SSB is not set -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USBIP_CORE=m -CONFIG_USBIP_VHCI_HCD=m -CONFIG_USBIP_VHCI_HC_PORTS=15 -CONFIG_USBIP_VHCI_NR_HCS=8 -CONFIG_USBIP_HOST=m -CONFIG_USBIP_VUDC=m -# CONFIG_USBIP_DEBUG is not set -CONFIG_USB_CDNS3=m -# CONFIG_USB_CDNS3_GADGET is not set -# CONFIG_USB_CDNS3_HOST is not set -CONFIG_USB_CDNS3_PCI_WRAP=m -CONFIG_USB_CDNS3_IMX=m -CONFIG_USB_MUSB_HDRC=m -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y - -# -# Platform Glue Layer -# -CONFIG_USB_MUSB_SUNXI=m - -# -# MUSB DMA mode -# -# CONFIG_MUSB_PIO_ONLY is not set -CONFIG_USB_DWC3=m -# CONFIG_USB_DWC3_ULPI is not set -# CONFIG_USB_DWC3_HOST is not set -# CONFIG_USB_DWC3_GADGET is not set -CONFIG_USB_DWC3_DUAL_ROLE=y - -# -# Platform Glue Driver Support -# -CONFIG_USB_DWC3_PCI=m -CONFIG_USB_DWC3_HAPS=m -CONFIG_USB_DWC3_MESON_G12A=m -CONFIG_USB_DWC3_OF_SIMPLE=m -CONFIG_USB_DWC3_QCOM=m -CONFIG_USB_DWC2=m -# CONFIG_USB_DWC2_HOST is not set - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -# CONFIG_USB_DWC2_PERIPHERAL is not set -CONFIG_USB_DWC2_DUAL_ROLE=y -# CONFIG_USB_DWC2_PCI is not set -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_CHIPIDEA=m -CONFIG_USB_CHIPIDEA_OF=m -CONFIG_USB_CHIPIDEA_PCI=m -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_ISP1760=m -CONFIG_USB_ISP1760_HCD=y -CONFIG_USB_ISP1761_UDC=y -# CONFIG_USB_ISP1760_HOST_ROLE is not set -# CONFIG_USB_ISP1760_GADGET_ROLE is not set -CONFIG_USB_ISP1760_DUAL_ROLE=y - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -# CONFIG_USB_SERIAL_F8153X is not set -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7715_PARPORT=y -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -# CONFIG_USB_SERIAL_UPD78F0730 is not set -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_APPLE_MFI_FASTCHARGE=m -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_USB_EHSET_TEST_FIXTURE=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m -# CONFIG_USB_HUB_USB251XB is not set -CONFIG_USB_HSIC_USB3503=m -# CONFIG_USB_HSIC_USB4604 is not set -# CONFIG_USB_LINK_LAYER_TEST is not set -CONFIG_USB_CHAOSKEY=m -# CONFIG_USB_ATM is not set - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=m -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_USB_ISP1301 is not set -CONFIG_USB_MXS_PHY=m -CONFIG_USB_TEGRA_PHY=m -CONFIG_USB_ULPI=y -CONFIG_USB_ULPI_VIEWPORT=y -# end of USB Physical Layer drivers - -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -# CONFIG_U_SERIAL_CONSOLE is not set - -# -# USB Peripheral Controller -# -CONFIG_USB_FSL_USB2=m -# CONFIG_USB_FOTG210_UDC is not set -# CONFIG_USB_GR_UDC is not set -# CONFIG_USB_R8A66597 is not set -# CONFIG_USB_PXA27X is not set -# CONFIG_USB_MV_UDC is not set -# CONFIG_USB_MV_U3D is not set -# CONFIG_USB_SNP_UDC_PLAT is not set -# CONFIG_USB_M66592 is not set -# CONFIG_USB_BDC_UDC is not set -# CONFIG_USB_AMD5536UDC is not set -# CONFIG_USB_NET2272 is not set -CONFIG_USB_NET2280=m -# CONFIG_USB_GOKU is not set -# CONFIG_USB_EG20T is not set -# CONFIG_USB_GADGET_XILINX is not set -CONFIG_USB_MAX3420_UDC=m -CONFIG_USB_TEGRA_XUDC=m -# CONFIG_USB_DUMMY_HCD is not set -# end of USB Peripheral Controller - -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_F_SS_LB=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_U_AUDIO=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_NCM=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_PHONET=m -CONFIG_USB_F_EEM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -CONFIG_USB_F_FS=m -CONFIG_USB_F_UAC1=m -CONFIG_USB_F_UAC2=m -CONFIG_USB_F_UVC=m -CONFIG_USB_F_MIDI=m -CONFIG_USB_F_HID=m -CONFIG_USB_F_PRINTER=m -CONFIG_USB_CONFIGFS=m -CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_ACM=y -CONFIG_USB_CONFIGFS_OBEX=y -CONFIG_USB_CONFIGFS_NCM=y -CONFIG_USB_CONFIGFS_ECM=y -CONFIG_USB_CONFIGFS_ECM_SUBSET=y -CONFIG_USB_CONFIGFS_RNDIS=y -CONFIG_USB_CONFIGFS_EEM=y -CONFIG_USB_CONFIGFS_PHONET=y -CONFIG_USB_CONFIGFS_MASS_STORAGE=y -CONFIG_USB_CONFIGFS_F_LB_SS=y -CONFIG_USB_CONFIGFS_F_FS=y -CONFIG_USB_CONFIGFS_F_UAC1=y -# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set -CONFIG_USB_CONFIGFS_F_UAC2=y -CONFIG_USB_CONFIGFS_F_MIDI=y -CONFIG_USB_CONFIGFS_F_HID=y -CONFIG_USB_CONFIGFS_F_UVC=y -CONFIG_USB_CONFIGFS_F_PRINTER=y -# CONFIG_USB_CONFIGFS_F_TCM is not set - -# -# USB Gadget precomposed configurations -# -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_ETH_EEM is not set -# CONFIG_USB_G_NCM is not set -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m -CONFIG_USB_FUNCTIONFS_ETH=y -CONFIG_USB_FUNCTIONFS_RNDIS=y -CONFIG_USB_FUNCTIONFS_GENERIC=y -# CONFIG_USB_MASS_STORAGE is not set -# CONFIG_USB_GADGET_TARGET is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_G_NOKIA is not set -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_WEBCAM is not set -CONFIG_USB_RAW_GADGET=m -# end of USB Gadget precomposed configurations - -# CONFIG_TYPEC is not set -CONFIG_USB_ROLE_SWITCH=m -CONFIG_MMC=y -CONFIG_PWRSEQ_EMMC=y -# CONFIG_PWRSEQ_SD8787 is not set -CONFIG_PWRSEQ_SIMPLE=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_MINORS=256 -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_ARMMMCI=m -CONFIG_MMC_QCOM_DML=y -CONFIG_MMC_STM32_SDMMC=y -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=y -CONFIG_MMC_SDHCI_ACPI=m -CONFIG_MMC_SDHCI_PLTFM=m -CONFIG_MMC_SDHCI_OF_ARASAN=m -CONFIG_MMC_SDHCI_OF_ASPEED=m -# CONFIG_MMC_SDHCI_OF_AT91 is not set -CONFIG_MMC_SDHCI_OF_ESDHC=m -# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set -# CONFIG_MMC_SDHCI_CADENCE is not set -CONFIG_MMC_SDHCI_ESDHC_IMX=m -CONFIG_MMC_SDHCI_TEGRA=m -# CONFIG_MMC_SDHCI_PXAV3 is not set -CONFIG_MMC_SDHCI_F_SDH30=m -# CONFIG_MMC_SDHCI_MILBEAUT is not set -CONFIG_MMC_SDHCI_IPROC=m -CONFIG_MMC_MESON_GX=m -# CONFIG_MMC_MESON_MX_SDIO is not set -CONFIG_MMC_ALCOR=m -CONFIG_MMC_SDHCI_MSM=m -CONFIG_MMC_MXC=m -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SPI=m -CONFIG_MMC_CB710=m -CONFIG_MMC_VIA_SDMMC=m -CONFIG_MMC_DW=m -CONFIG_MMC_DW_PLTFM=m -# CONFIG_MMC_DW_BLUEFIELD is not set -# CONFIG_MMC_DW_EXYNOS is not set -# CONFIG_MMC_DW_HI3798CV200 is not set -CONFIG_MMC_DW_K3=m -# CONFIG_MMC_DW_PCI is not set -CONFIG_MMC_DW_ROCKCHIP=m -CONFIG_MMC_VUB300=m -CONFIG_MMC_USHC=m -# CONFIG_MMC_USDHI6ROL0 is not set -CONFIG_MMC_REALTEK_PCI=m -CONFIG_MMC_REALTEK_USB=m -CONFIG_MMC_SUNXI=m -CONFIG_MMC_CQHCI=m -CONFIG_MMC_HSQ=m -CONFIG_MMC_TOSHIBA_PCI=m -CONFIG_MMC_BCM2835=m -# CONFIG_MMC_MTK is not set -CONFIG_MMC_SDHCI_XENON=m -# CONFIG_MMC_SDHCI_OMAP is not set -CONFIG_MMC_SDHCI_AM654=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m -# CONFIG_MS_BLOCK is not set - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_MEMSTICK_R592=m -CONFIG_MEMSTICK_REALTEK_PCI=m -CONFIG_MEMSTICK_REALTEK_USB=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -# CONFIG_LEDS_CLASS_FLASH is not set -CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y - -# -# LED drivers -# -# CONFIG_LEDS_AN30259A is not set -# CONFIG_LEDS_BCM6328 is not set -# CONFIG_LEDS_BCM6358 is not set -# CONFIG_LEDS_CR0014114 is not set -# CONFIG_LEDS_EL15203000 is not set -# CONFIG_LEDS_LM3530 is not set -# CONFIG_LEDS_LM3532 is not set -# CONFIG_LEDS_LM3642 is not set -# CONFIG_LEDS_LM3692X is not set -# CONFIG_LEDS_PCA9532 is not set -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_LP3944=m -# CONFIG_LEDS_LP3952 is not set -# CONFIG_LEDS_LP5521 is not set -# CONFIG_LEDS_LP5523 is not set -# CONFIG_LEDS_LP5562 is not set -# CONFIG_LEDS_LP8501 is not set -# CONFIG_LEDS_LP8860 is not set -CONFIG_LEDS_PCA955X=m -# CONFIG_LEDS_PCA955X_GPIO is not set -# CONFIG_LEDS_PCA963X is not set -CONFIG_LEDS_DAC124S085=m -CONFIG_LEDS_PWM=m -CONFIG_LEDS_REGULATOR=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_LT3593=m -# CONFIG_LEDS_TCA6507 is not set -# CONFIG_LEDS_TLC591XX is not set -# CONFIG_LEDS_LM355x is not set -# CONFIG_LEDS_IS31FL319X is not set -# CONFIG_LEDS_IS31FL32XX is not set - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -# CONFIG_LEDS_BLINKM is not set -# CONFIG_LEDS_SYSCON is not set -# CONFIG_LEDS_MLXREG is not set -# CONFIG_LEDS_USER is not set -CONFIG_LEDS_SPI_BYTE=m -CONFIG_LEDS_TI_LMU_COMMON=m -CONFIG_LEDS_LM3697=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_ONESHOT=m -CONFIG_LEDS_TRIGGER_DISK=y -CONFIG_LEDS_TRIGGER_MTD=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_CPU=y -# CONFIG_LEDS_TRIGGER_ACTIVITY is not set -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - -# -# iptables trigger is under Netfilter config (LED target) -# -CONFIG_LEDS_TRIGGER_TRANSIENT=m -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LEDS_TRIGGER_PANIC=y -# CONFIG_LEDS_TRIGGER_NETDEV is not set -# CONFIG_LEDS_TRIGGER_PATTERN is not set -CONFIG_LEDS_TRIGGER_AUDIO=m -CONFIG_ACCESSIBILITY=y -CONFIG_A11Y_BRAILLE_CONSOLE=y -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ON_DEMAND_PAGING=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y -CONFIG_INFINIBAND_MTHCA=m -CONFIG_INFINIBAND_MTHCA_DEBUG=y -CONFIG_INFINIBAND_CXGB4=m -CONFIG_INFINIBAND_EFA=m -CONFIG_INFINIBAND_I40IW=m -CONFIG_MLX4_INFINIBAND=m -CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_OCRDMA=m -# CONFIG_INFINIBAND_HNS is not set -# CONFIG_INFINIBAND_BNXT_RE is not set -CONFIG_INFINIBAND_QEDR=m -CONFIG_RDMA_RXE=m -CONFIG_RDMA_SIW=m -CONFIG_INFINIBAND_IPOIB=m -CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y -# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_SRPT=m -CONFIG_INFINIBAND_ISER=m -CONFIG_INFINIBAND_ISERT=m -CONFIG_EDAC_SUPPORT=y -CONFIG_EDAC=y -CONFIG_EDAC_LEGACY_SYSFS=y -# CONFIG_EDAC_DEBUG is not set -CONFIG_EDAC_THUNDERX=m -CONFIG_EDAC_XGENE=m -# CONFIG_EDAC_QCOM is not set -CONFIG_EDAC_DMC520=m -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set -CONFIG_RTC_NVMEM=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_ABB5ZES3 is not set -# CONFIG_RTC_DRV_ABEOZ9 is not set -# CONFIG_RTC_DRV_ABX80X is not set -CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1307_CENTURY is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_HYM8563 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -CONFIG_RTC_DRV_MAX77686=y -CONFIG_RTC_DRV_RK808=m -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_ISL12022 is not set -# CONFIG_RTC_DRV_ISL12026 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8523 is not set -# CONFIG_RTC_DRV_PCF85063 is not set -# CONFIG_RTC_DRV_PCF85363 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -CONFIG_RTC_DRV_BD70528=m -# CONFIG_RTC_DRV_BQ32K is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8010 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_RX8025 is not set -# CONFIG_RTC_DRV_EM3027 is not set -# CONFIG_RTC_DRV_RV3028 is not set -# CONFIG_RTC_DRV_RV8803 is not set -# CONFIG_RTC_DRV_SD3078 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T93 is not set -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1302 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1343 is not set -# CONFIG_RTC_DRV_DS1347 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6916 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RX4581 is not set -# CONFIG_RTC_DRV_RX6110 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_PCF2123 is not set -# CONFIG_RTC_DRV_MCP795 is not set -CONFIG_RTC_I2C_AND_SPI=y - -# -# SPI and I2C RTC drivers -# -# CONFIG_RTC_DRV_DS3232 is not set -# CONFIG_RTC_DRV_PCF2127 is not set -# CONFIG_RTC_DRV_RV3029C2 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1685_FAMILY is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_DS2404 is not set -CONFIG_RTC_DRV_EFI=y -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set -# CONFIG_RTC_DRV_ZYNQMP is not set -# CONFIG_RTC_DRV_CROS_EC is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_IMXDI=m -CONFIG_RTC_DRV_MESON_VRTC=m -# CONFIG_RTC_DRV_PL030 is not set -CONFIG_RTC_DRV_PL031=y -CONFIG_RTC_DRV_SUN6I=y -CONFIG_RTC_DRV_MV=m -CONFIG_RTC_DRV_ARMADA38X=m -CONFIG_RTC_DRV_CADENCE=m -# CONFIG_RTC_DRV_FTRTC010 is not set -CONFIG_RTC_DRV_PM8XXX=m -CONFIG_RTC_DRV_TEGRA=y -CONFIG_RTC_DRV_MXC=m -CONFIG_RTC_DRV_MXC_V2=m -# CONFIG_RTC_DRV_SNVS is not set -CONFIG_RTC_DRV_IMX_SC=m -CONFIG_RTC_DRV_XGENE=y -# CONFIG_RTC_DRV_R7301 is not set - -# -# HID Sensor RTC drivers -# -# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DMA_ACPI=y -CONFIG_DMA_OF=y -# CONFIG_ALTERA_MSGDMA is not set -# CONFIG_AMBA_PL08X is not set -# CONFIG_BCM_SBA_RAID is not set -CONFIG_DMA_BCM2835=y -CONFIG_DMA_SUN6I=m -# CONFIG_DW_AXI_DMAC is not set -# CONFIG_FSL_EDMA is not set -CONFIG_FSL_QDMA=m -CONFIG_HISI_DMA=m -CONFIG_IMX_DMA=m -CONFIG_IMX_SDMA=m -# CONFIG_INTEL_IDMA64 is not set -CONFIG_K3_DMA=m -CONFIG_MV_XOR=y -CONFIG_MV_XOR_V2=y -# CONFIG_MXS_DMA is not set -CONFIG_MX3_IPU=y -CONFIG_MX3_IPU_IRQS=4 -CONFIG_PL330_DMA=m -CONFIG_PLX_DMA=m -CONFIG_TEGRA20_APB_DMA=y -CONFIG_TEGRA210_ADMA=y -CONFIG_XGENE_DMA=m -# CONFIG_XILINX_DMA is not set -# CONFIG_XILINX_ZYNQMP_DMA is not set -CONFIG_QCOM_BAM_DMA=m -CONFIG_QCOM_HIDMA_MGMT=m -CONFIG_QCOM_HIDMA=m -# CONFIG_DW_DMAC is not set -# CONFIG_DW_DMAC_PCI is not set -CONFIG_DW_EDMA=m -CONFIG_DW_EDMA_PCIE=m -CONFIG_SF_PDMA=m - -# -# DMA Clients -# -CONFIG_ASYNC_TX_DMA=y -# CONFIG_DMATEST is not set -CONFIG_DMA_ENGINE_RAID=y - -# -# DMABUF options -# -CONFIG_SYNC_FILE=y -# CONFIG_SW_SYNC is not set -# CONFIG_UDMABUF is not set -# CONFIG_DMABUF_MOVE_NOTIFY is not set -# CONFIG_DMABUF_SELFTESTS is not set -# CONFIG_DMABUF_HEAPS is not set -# end of DMABUF options - -# CONFIG_AUXDISPLAY is not set -# CONFIG_PANEL is not set -CONFIG_UIO=m -CONFIG_UIO_CIF=m -# CONFIG_UIO_PDRV_GENIRQ is not set -# CONFIG_UIO_DMEM_GENIRQ is not set -CONFIG_UIO_AEC=m -CONFIG_UIO_SERCOS3=m -CONFIG_UIO_PCI_GENERIC=m -CONFIG_UIO_NETX=m -# CONFIG_UIO_PRUSS is not set -CONFIG_UIO_MF624=m -CONFIG_VFIO_IOMMU_TYPE1=m -CONFIG_VFIO_VIRQFD=m -CONFIG_VFIO=m -CONFIG_VFIO_NOIOMMU=y -CONFIG_VFIO_PCI=m -CONFIG_VFIO_PCI_MMAP=y -CONFIG_VFIO_PCI_INTX=y -# CONFIG_VFIO_PLATFORM is not set -# CONFIG_VFIO_MDEV is not set -CONFIG_VIRT_DRIVERS=y -CONFIG_VIRTIO=m -CONFIG_VIRTIO_MENU=y -CONFIG_VIRTIO_PCI=m -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_VDPA=m -CONFIG_VIRTIO_PMEM=m -CONFIG_VIRTIO_BALLOON=m -CONFIG_VIRTIO_INPUT=m -CONFIG_VIRTIO_MMIO=m -# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set -CONFIG_VDPA=m -# CONFIG_VDPA_SIM is not set -CONFIG_IFCVF=m -CONFIG_VHOST_IOTLB=m -CONFIG_VHOST_DPN=y -CONFIG_VHOST=m -CONFIG_VHOST_MENU=y -CONFIG_VHOST_NET=m -CONFIG_VHOST_SCSI=m -CONFIG_VHOST_VSOCK=m -CONFIG_VHOST_VDPA=m -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set - -# -# Microsoft Hyper-V guest support -# -# end of Microsoft Hyper-V guest support - -# -# Xen driver support -# -CONFIG_XEN_BALLOON=y -CONFIG_XEN_SCRUB_PAGES_DEFAULT=y -CONFIG_XEN_DEV_EVTCHN=m -CONFIG_XEN_BACKEND=y -CONFIG_XENFS=m -CONFIG_XEN_COMPAT_XENFS=y -CONFIG_XEN_SYS_HYPERVISOR=y -CONFIG_XEN_XENBUS_FRONTEND=y -CONFIG_XEN_GNTDEV=m -CONFIG_XEN_GRANT_DEV_ALLOC=m -# CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_SWIOTLB_XEN=y -# CONFIG_XEN_PVCALLS_FRONTEND is not set -# CONFIG_XEN_PVCALLS_BACKEND is not set -CONFIG_XEN_SCSI_BACKEND=m -CONFIG_XEN_PRIVCMD=m -CONFIG_XEN_EFI=y -CONFIG_XEN_AUTO_XLATE=y -# end of Xen driver support - -# CONFIG_GREYBUS is not set -CONFIG_STAGING=y -# CONFIG_PRISM2_USB is not set -# CONFIG_COMEDI is not set -# CONFIG_RTL8192U is not set -# CONFIG_RTLLIB is not set -CONFIG_RTL8723BS=m -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -# CONFIG_RTS5208 is not set -# CONFIG_VT6655 is not set -# CONFIG_VT6656 is not set - -# -# IIO staging drivers -# - -# -# Accelerometers -# -# CONFIG_ADIS16203 is not set -# CONFIG_ADIS16240 is not set -# end of Accelerometers - -# -# Analog to digital converters -# -# CONFIG_AD7816 is not set -# CONFIG_AD7280 is not set -# end of Analog to digital converters - -# -# Analog digital bi-direction converters -# -# CONFIG_ADT7316 is not set -# end of Analog digital bi-direction converters - -# -# Capacitance to digital converters -# -# CONFIG_AD7150 is not set -# CONFIG_AD7746 is not set -# end of Capacitance to digital converters - -# -# Direct Digital Synthesis -# -# CONFIG_AD9832 is not set -# CONFIG_AD9834 is not set -# end of Direct Digital Synthesis - -# -# Network Analyzer, Impedance Converters -# -# CONFIG_AD5933 is not set -# end of Network Analyzer, Impedance Converters - -# -# Active energy metering IC -# -# CONFIG_ADE7854 is not set -# end of Active energy metering IC - -# -# Resolver to digital converters -# -# CONFIG_AD2S1210 is not set -# end of Resolver to digital converters -# end of IIO staging drivers - -# CONFIG_FB_SM750 is not set - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -CONFIG_SPEAKUP_SYNTH_DUMMY=m -# end of Speakup console speech - -# CONFIG_MFD_NVEC is not set -# CONFIG_STAGING_MEDIA is not set - -# -# Android -# -# end of Android - -# CONFIG_STAGING_BOARD is not set -# CONFIG_LTE_GDM724X is not set -# CONFIG_FIREWIRE_SERIAL is not set -# CONFIG_GS_FPGABOOT is not set -# CONFIG_UNISYSSPAR is not set -# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set -# CONFIG_FB_TFT is not set -# CONFIG_WILC1000_SDIO is not set -# CONFIG_WILC1000_SPI is not set -# CONFIG_KS7010 is not set -CONFIG_BCM_VIDEOCORE=y -# CONFIG_BCM2835_VCHIQ is not set -# CONFIG_SND_BCM2835 is not set -# CONFIG_VIDEO_BCM2835 is not set -# CONFIG_PI433 is not set - -# -# Gasket devices -# -# CONFIG_STAGING_GASKET_FRAMEWORK is not set -# end of Gasket devices - -# CONFIG_XIL_AXIS_FIFO is not set -# CONFIG_FIELDBUS_DEV is not set -# CONFIG_KPC2000 is not set -CONFIG_QLGE=m -CONFIG_WFX=m -# CONFIG_GOLDFISH is not set -CONFIG_MFD_CROS_EC=y -CONFIG_CHROME_PLATFORMS=y -CONFIG_CHROMEOS_TBMC=m -CONFIG_CROS_EC=y -CONFIG_CROS_EC_I2C=m -CONFIG_CROS_EC_RPMSG=m -CONFIG_CROS_EC_SPI=m -CONFIG_CROS_EC_PROTO=y -CONFIG_CROS_KBD_LED_BACKLIGHT=m -CONFIG_CROS_EC_CHARDEV=m -CONFIG_CROS_EC_LIGHTBAR=m -CONFIG_CROS_EC_VBC=m -CONFIG_CROS_EC_DEBUGFS=m -CONFIG_CROS_EC_SENSORHUB=m -CONFIG_CROS_EC_SYSFS=m -CONFIG_CROS_USBPD_LOGGER=m -CONFIG_CROS_USBPD_NOTIFY=m -# CONFIG_MELLANOX_PLATFORM is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -CONFIG_COMMON_CLK_VERSATILE=y -CONFIG_CLK_SP810=y -CONFIG_CLK_VEXPRESS_OSC=y -# CONFIG_CLK_HSDK is not set -# CONFIG_COMMON_CLK_MAX77686 is not set -CONFIG_COMMON_CLK_MAX9485=m -CONFIG_COMMON_CLK_RK808=m -CONFIG_COMMON_CLK_HI655X=m -CONFIG_COMMON_CLK_SCMI=m -CONFIG_COMMON_CLK_SI5341=m -# CONFIG_COMMON_CLK_SI5351 is not set -# CONFIG_COMMON_CLK_SI514 is not set -# CONFIG_COMMON_CLK_SI544 is not set -# CONFIG_COMMON_CLK_SI570 is not set -CONFIG_COMMON_CLK_BM1880=y -# CONFIG_COMMON_CLK_CDCE706 is not set -# CONFIG_COMMON_CLK_CDCE925 is not set -# CONFIG_COMMON_CLK_CS2000_CP is not set -# CONFIG_CLK_QORIQ is not set -CONFIG_COMMON_CLK_XGENE=y -# CONFIG_COMMON_CLK_PWM is not set -# CONFIG_COMMON_CLK_VC5 is not set -# CONFIG_COMMON_CLK_BD718XX is not set -# CONFIG_COMMON_CLK_FIXED_MMIO is not set -# CONFIG_CLK_BCM2835 is not set -CONFIG_CLK_RASPBERRYPI=m -CONFIG_COMMON_CLK_HI3516CV300=y -CONFIG_COMMON_CLK_HI3519=y -CONFIG_COMMON_CLK_HI3660=y -CONFIG_COMMON_CLK_HI3670=y -CONFIG_COMMON_CLK_HI3798CV200=y -CONFIG_COMMON_CLK_HI6220=y -CONFIG_RESET_HISI=y -CONFIG_STUB_CLK_HI6220=y -# CONFIG_STUB_CLK_HI3660 is not set -CONFIG_MXC_CLK=y -CONFIG_MXC_CLK_SCU=y -CONFIG_CLK_IMX8MM=y -CONFIG_CLK_IMX8MN=y -CONFIG_CLK_IMX8MP=y -CONFIG_CLK_IMX8MQ=y -CONFIG_CLK_IMX8QXP=y -CONFIG_COMMON_CLK_MESON_REGMAP=y -CONFIG_COMMON_CLK_MESON_DUALDIV=y -CONFIG_COMMON_CLK_MESON_MPLL=y -CONFIG_COMMON_CLK_MESON_PHASE=m -CONFIG_COMMON_CLK_MESON_PLL=y -CONFIG_COMMON_CLK_MESON_SCLK_DIV=m -CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y -CONFIG_COMMON_CLK_MESON_AO_CLKC=y -CONFIG_COMMON_CLK_MESON_EE_CLKC=y -CONFIG_COMMON_CLK_MESON_CPU_DYNDIV=y -CONFIG_COMMON_CLK_GXBB=y -CONFIG_COMMON_CLK_AXG=y -CONFIG_COMMON_CLK_AXG_AUDIO=m -CONFIG_COMMON_CLK_G12A=y -CONFIG_ARMADA_AP_CP_HELPER=y -CONFIG_ARMADA_37XX_CLK=y -CONFIG_ARMADA_AP806_SYSCON=y -CONFIG_ARMADA_CP110_SYSCON=y -CONFIG_QCOM_GDSC=y -CONFIG_QCOM_RPMCC=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_QCOM_A53PLL=y -CONFIG_QCOM_CLK_APCS_MSM8916=m -CONFIG_QCOM_CLK_RPM=m -CONFIG_QCOM_CLK_SMD_RPM=m -# CONFIG_APQ_GCC_8084 is not set -# CONFIG_APQ_MMCC_8084 is not set -# CONFIG_IPQ_GCC_4019 is not set -# CONFIG_IPQ_GCC_6018 is not set -# CONFIG_IPQ_GCC_806X is not set -# CONFIG_IPQ_LCC_806X is not set -# CONFIG_IPQ_GCC_8074 is not set -# CONFIG_MSM_GCC_8660 is not set -CONFIG_MSM_GCC_8916=y -# CONFIG_MSM_GCC_8960 is not set -# CONFIG_MSM_LCC_8960 is not set -# CONFIG_MDM_GCC_9615 is not set -# CONFIG_MDM_LCC_9615 is not set -# CONFIG_MSM_MMCC_8960 is not set -# CONFIG_MSM_GCC_8974 is not set -# CONFIG_MSM_MMCC_8974 is not set -# CONFIG_MSM_GCC_8994 is not set -CONFIG_MSM_GCC_8996=y -CONFIG_MSM_MMCC_8996=y -# CONFIG_MSM_GCC_8998 is not set -# CONFIG_MSM_GPUCC_8998 is not set -# CONFIG_MSM_MMCC_8998 is not set -# CONFIG_QCS_GCC_404 is not set -# CONFIG_SC_DISPCC_7180 is not set -# CONFIG_SC_GCC_7180 is not set -# CONFIG_SC_GPUCC_7180 is not set -# CONFIG_SC_MSS_7180 is not set -# CONFIG_SC_VIDEOCC_7180 is not set -# CONFIG_SDM_CAMCC_845 is not set -# CONFIG_SDM_GCC_660 is not set -# CONFIG_QCS_TURING_404 is not set -# CONFIG_QCS_Q6SSTOP_404 is not set -CONFIG_SDM_GCC_845=m -CONFIG_SDM_GPUCC_845=m -CONFIG_SDM_VIDEOCC_845=m -CONFIG_SDM_DISPCC_845=m -CONFIG_SDM_LPASSCC_845=m -# CONFIG_SM_GCC_8150 is not set -# CONFIG_SM_GCC_8250 is not set -# CONFIG_SPMI_PMIC_CLKDIV is not set -# CONFIG_QCOM_HFPLL is not set -# CONFIG_KPSS_XCC is not set -CONFIG_CLK_SUNXI=y -CONFIG_CLK_SUNXI_CLOCKS=y -CONFIG_CLK_SUNXI_PRCM_SUN6I=y -CONFIG_CLK_SUNXI_PRCM_SUN8I=y -CONFIG_CLK_SUNXI_PRCM_SUN9I=y -CONFIG_SUNXI_CCU=y -CONFIG_SUN50I_A64_CCU=y -CONFIG_SUN50I_H6_CCU=y -CONFIG_SUN50I_H6_R_CCU=y -# CONFIG_SUN8I_A83T_CCU is not set -CONFIG_SUN8I_H3_CCU=y -CONFIG_SUN8I_DE2_CCU=y -CONFIG_SUN8I_R_CCU=y -CONFIG_CLK_TEGRA_BPMP=y -CONFIG_TEGRA_CLK_DFLL=y -# end of Common Clock Framework - -# CONFIG_HWSPINLOCK is not set - -# -# Clock Source drivers -# -CONFIG_TIMER_OF=y -CONFIG_TIMER_ACPI=y -CONFIG_TIMER_PROBE=y -CONFIG_CLKSRC_MMIO=y -CONFIG_ROCKCHIP_TIMER=y -CONFIG_TEGRA_TIMER=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y -CONFIG_FSL_ERRATUM_A008585=y -CONFIG_HISILICON_ERRATUM_161010101=y -CONFIG_ARM64_ERRATUM_858921=y -CONFIG_SUN50I_ERRATUM_UNKNOWN1=y -CONFIG_ARM_TIMER_SP804=y -CONFIG_CLKSRC_VERSATILE=y -CONFIG_TIMER_IMX_SYS_CTR=y -# CONFIG_MICROCHIP_PIT64B is not set -# end of Clock Source drivers - -CONFIG_MAILBOX=y -# CONFIG_ARM_MHU is not set -CONFIG_IMX_MBOX=m -# CONFIG_PLATFORM_MHU is not set -# CONFIG_PL320_MBOX is not set -CONFIG_ARMADA_37XX_RWTM_MBOX=m -# CONFIG_ROCKCHIP_MBOX is not set -CONFIG_PCC=y -# CONFIG_ALTERA_MBOX is not set -CONFIG_BCM2835_MBOX=y -# CONFIG_HI3660_MBOX is not set -CONFIG_HI6220_MBOX=y -# CONFIG_MAILBOX_TEST is not set -CONFIG_QCOM_APCS_IPC=m -CONFIG_TEGRA_HSP_MBOX=y -CONFIG_XGENE_SLIMPRO_MBOX=m -CONFIG_SUN6I_MSGBOX=m -CONFIG_IOMMU_IOVA=y -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -CONFIG_IOMMU_IO_PGTABLE=y -CONFIG_IOMMU_IO_PGTABLE_LPAE=y -# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# end of Generic IOMMU Pagetable Support - -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_OF_IOMMU=y -CONFIG_IOMMU_DMA=y -# CONFIG_ROCKCHIP_IOMMU is not set -CONFIG_TEGRA_IOMMU_SMMU=y -CONFIG_ARM_SMMU=y -# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set -CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y -CONFIG_ARM_SMMU_V3=y -CONFIG_QCOM_IOMMU=y -CONFIG_VIRTIO_IOMMU=m - -# -# Remoteproc drivers -# -# CONFIG_REMOTEPROC is not set -# end of Remoteproc drivers - -# -# Rpmsg drivers -# -CONFIG_RPMSG=m -# CONFIG_RPMSG_CHAR is not set -CONFIG_RPMSG_QCOM_GLINK_NATIVE=m -CONFIG_RPMSG_QCOM_GLINK_RPM=m -# CONFIG_RPMSG_VIRTIO is not set -# end of Rpmsg drivers - -# CONFIG_SOUNDWIRE is not set - -# -# SOC (System On Chip) specific Drivers -# - -# -# Amlogic SoC drivers -# -CONFIG_MESON_CANVAS=m -CONFIG_MESON_CLK_MEASURE=y -CONFIG_MESON_GX_SOCINFO=y -CONFIG_MESON_GX_PM_DOMAINS=y -CONFIG_MESON_EE_PM_DOMAINS=y -CONFIG_MESON_SECURE_PM_DOMAINS=y -CONFIG_MESON_MX_SOCINFO=y -# end of Amlogic SoC drivers - -# -# Aspeed SoC drivers -# -# end of Aspeed SoC drivers - -# -# Broadcom SoC drivers -# -CONFIG_BCM2835_POWER=y -CONFIG_RASPBERRYPI_POWER=y -# CONFIG_SOC_BRCMSTB is not set -# end of Broadcom SoC drivers - -# -# NXP/Freescale QorIQ SoC drivers -# -# CONFIG_QUICC_ENGINE is not set -CONFIG_FSL_GUTS=y -CONFIG_FSL_RCPM=y -# end of NXP/Freescale QorIQ SoC drivers - -# -# i.MX SoC drivers -# -CONFIG_IMX_GPCV2_PM_DOMAINS=y -# CONFIG_IMX_SCU_SOC is not set -CONFIG_SOC_IMX8M=y -# end of i.MX SoC drivers - -# -# Qualcomm SoC drivers -# -CONFIG_QCOM_AOSS_QMP=m -CONFIG_QCOM_COMMAND_DB=y -CONFIG_QCOM_GENI_SE=m -CONFIG_QCOM_GSBI=m -CONFIG_QCOM_LLCC=m -CONFIG_QCOM_MDT_LOADER=m -# CONFIG_QCOM_OCMEM is not set -CONFIG_QCOM_PDR_HELPERS=m -CONFIG_QCOM_QMI_HELPERS=m -# CONFIG_QCOM_RMTFS_MEM is not set -# CONFIG_QCOM_RPMH is not set -CONFIG_QCOM_SMD_RPM=m -CONFIG_QCOM_WCNSS_CTRL=m -CONFIG_QCOM_APR=m -# end of Qualcomm SoC drivers - -CONFIG_ROCKCHIP_GRF=y -CONFIG_ROCKCHIP_PM_DOMAINS=y -CONFIG_SUNXI_SRAM=y -CONFIG_ARCH_TEGRA_132_SOC=y -CONFIG_ARCH_TEGRA_210_SOC=y -# CONFIG_ARCH_TEGRA_186_SOC is not set -CONFIG_ARCH_TEGRA_194_SOC=y -CONFIG_SOC_TEGRA_FUSE=y -CONFIG_SOC_TEGRA_FLOWCTRL=y -CONFIG_SOC_TEGRA_PMC=y -CONFIG_SOC_TEGRA_POWERGATE_BPMP=y -# CONFIG_SOC_TI is not set - -# -# Xilinx SoC drivers -# -# CONFIG_XILINX_VCU is not set -# end of Xilinx SoC drivers -# end of SOC (System On Chip) specific Drivers - -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m -# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set -# CONFIG_DEVFREQ_GOV_POWERSAVE is not set -CONFIG_DEVFREQ_GOV_USERSPACE=m -# CONFIG_DEVFREQ_GOV_PASSIVE is not set - -# -# DEVFREQ Drivers -# -CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m -CONFIG_ARM_TEGRA_DEVFREQ=m -# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set -# CONFIG_PM_DEVFREQ_EVENT is not set -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -# CONFIG_EXTCON_ADC_JACK is not set -CONFIG_EXTCON_FSA9480=m -# CONFIG_EXTCON_GPIO is not set -# CONFIG_EXTCON_MAX3355 is not set -CONFIG_EXTCON_PTN5150=m -CONFIG_EXTCON_QCOM_SPMI_MISC=m -# CONFIG_EXTCON_RT8973A is not set -# CONFIG_EXTCON_SM5502 is not set -CONFIG_EXTCON_USB_GPIO=m -# CONFIG_EXTCON_USBC_CROS_EC is not set -CONFIG_MEMORY=y -# CONFIG_ARM_PL172_MPMC is not set -CONFIG_TEGRA_MC=y -CONFIG_IIO=m -CONFIG_IIO_BUFFER=y -# CONFIG_IIO_BUFFER_CB is not set -# CONFIG_IIO_BUFFER_HW_CONSUMER is not set -CONFIG_IIO_KFIFO_BUF=m -CONFIG_IIO_TRIGGERED_BUFFER=m -# CONFIG_IIO_CONFIGFS is not set -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -# CONFIG_IIO_SW_DEVICE is not set -# CONFIG_IIO_SW_TRIGGER is not set - -# -# Accelerometers -# -# CONFIG_ADIS16201 is not set -# CONFIG_ADIS16209 is not set -# CONFIG_ADXL345_I2C is not set -# CONFIG_ADXL345_SPI is not set -# CONFIG_ADXL372_SPI is not set -# CONFIG_ADXL372_I2C is not set -# CONFIG_BMA180 is not set -# CONFIG_BMA220 is not set -CONFIG_BMA400=m -CONFIG_BMA400_I2C=m -# CONFIG_BMC150_ACCEL is not set -# CONFIG_DA280 is not set -# CONFIG_DA311 is not set -# CONFIG_DMARD06 is not set -# CONFIG_DMARD09 is not set -# CONFIG_DMARD10 is not set -CONFIG_HID_SENSOR_ACCEL_3D=m -# CONFIG_IIO_ST_ACCEL_3AXIS is not set -# CONFIG_KXSD9 is not set -# CONFIG_KXCJK1013 is not set -# CONFIG_MC3230 is not set -# CONFIG_MMA7455_I2C is not set -# CONFIG_MMA7455_SPI is not set -# CONFIG_MMA7660 is not set -# CONFIG_MMA8452 is not set -# CONFIG_MMA9551 is not set -# CONFIG_MMA9553 is not set -# CONFIG_MXC4005 is not set -# CONFIG_MXC6255 is not set -# CONFIG_SCA3000 is not set -# CONFIG_STK8312 is not set -# CONFIG_STK8BA50 is not set -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD_SIGMA_DELTA=m -CONFIG_AD7091R5=m -CONFIG_AD7124=m -# CONFIG_AD7192 is not set -# CONFIG_AD7266 is not set -# CONFIG_AD7291 is not set -# CONFIG_AD7292 is not set -# CONFIG_AD7298 is not set -# CONFIG_AD7476 is not set -# CONFIG_AD7606_IFACE_PARALLEL is not set -# CONFIG_AD7606_IFACE_SPI is not set -# CONFIG_AD7766 is not set -# CONFIG_AD7768_1 is not set -# CONFIG_AD7780 is not set -# CONFIG_AD7791 is not set -# CONFIG_AD7793 is not set -# CONFIG_AD7887 is not set -# CONFIG_AD7923 is not set -# CONFIG_AD7949 is not set -# CONFIG_AD799X is not set -CONFIG_AXP20X_ADC=m -CONFIG_AXP288_ADC=m -# CONFIG_CC10001_ADC is not set -# CONFIG_ENVELOPE_DETECTOR is not set -# CONFIG_HI8435 is not set -# CONFIG_HX711 is not set -# CONFIG_INA2XX_ADC is not set -CONFIG_IMX7D_ADC=m -# CONFIG_LTC2471 is not set -# CONFIG_LTC2485 is not set -# CONFIG_LTC2496 is not set -# CONFIG_LTC2497 is not set -# CONFIG_MAX1027 is not set -# CONFIG_MAX11100 is not set -# CONFIG_MAX1118 is not set -# CONFIG_MAX1363 is not set -# CONFIG_MAX9611 is not set -# CONFIG_MCP320X is not set -# CONFIG_MCP3422 is not set -# CONFIG_MCP3911 is not set -CONFIG_MESON_SARADC=m -# CONFIG_NAU7802 is not set -CONFIG_QCOM_VADC_COMMON=m -CONFIG_QCOM_SPMI_IADC=m -CONFIG_QCOM_SPMI_VADC=m -# CONFIG_QCOM_SPMI_ADC5 is not set -# CONFIG_ROCKCHIP_SARADC is not set -# CONFIG_SD_ADC_MODULATOR is not set -# CONFIG_TI_ADC081C is not set -# CONFIG_TI_ADC0832 is not set -# CONFIG_TI_ADC084S021 is not set -# CONFIG_TI_ADC12138 is not set -# CONFIG_TI_ADC108S102 is not set -# CONFIG_TI_ADC128S052 is not set -# CONFIG_TI_ADC161S626 is not set -# CONFIG_TI_ADS1015 is not set -# CONFIG_TI_ADS7950 is not set -# CONFIG_TI_ADS8344 is not set -# CONFIG_TI_ADS8688 is not set -# CONFIG_TI_ADS124S08 is not set -# CONFIG_TI_TLC4541 is not set -# CONFIG_VF610_ADC is not set -CONFIG_VIPERBOARD_ADC=m -CONFIG_XILINX_XADC=m -# end of Analog to digital converters - -# -# Analog Front Ends -# -# CONFIG_IIO_RESCALE is not set -# end of Analog Front Ends - -# -# Amplifiers -# -# CONFIG_AD8366 is not set -# CONFIG_HMC425 is not set -# end of Amplifiers - -# -# Chemical Sensors -# -# CONFIG_ATLAS_PH_SENSOR is not set -# CONFIG_BME680 is not set -# CONFIG_CCS811 is not set -# CONFIG_IAQCORE is not set -# CONFIG_PMS7003 is not set -# CONFIG_SENSIRION_SGP30 is not set -# CONFIG_SPS30 is not set -# CONFIG_VZ89X is not set -# end of Chemical Sensors - -# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set - -# -# Hid Sensor IIO Common -# -CONFIG_HID_SENSOR_IIO_COMMON=m -CONFIG_HID_SENSOR_IIO_TRIGGER=m -# end of Hid Sensor IIO Common - -# -# SSP Sensor Common -# -# CONFIG_IIO_SSP_SENSORHUB is not set -# end of SSP Sensor Common - -# -# Digital to analog converters -# -# CONFIG_AD5064 is not set -# CONFIG_AD5360 is not set -# CONFIG_AD5380 is not set -# CONFIG_AD5421 is not set -CONFIG_AD5446=m -# CONFIG_AD5449 is not set -# CONFIG_AD5592R is not set -# CONFIG_AD5593R is not set -# CONFIG_AD5504 is not set -# CONFIG_AD5624R_SPI is not set -# CONFIG_AD5686_SPI is not set -# CONFIG_AD5696_I2C is not set -# CONFIG_AD5755 is not set -# CONFIG_AD5758 is not set -# CONFIG_AD5761 is not set -# CONFIG_AD5764 is not set -# CONFIG_AD5770R is not set -# CONFIG_AD5791 is not set -# CONFIG_AD7303 is not set -# CONFIG_AD8801 is not set -# CONFIG_DPOT_DAC is not set -# CONFIG_DS4424 is not set -# CONFIG_LTC1660 is not set -# CONFIG_LTC2632 is not set -# CONFIG_M62332 is not set -# CONFIG_MAX517 is not set -# CONFIG_MAX5821 is not set -# CONFIG_MCP4725 is not set -# CONFIG_MCP4922 is not set -# CONFIG_TI_DAC082S085 is not set -# CONFIG_TI_DAC5571 is not set -# CONFIG_TI_DAC7311 is not set -# CONFIG_TI_DAC7612 is not set -# CONFIG_VF610_DAC is not set -# end of Digital to analog converters - -# -# IIO dummy driver -# -# end of IIO dummy driver - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# -# CONFIG_AD9523 is not set -# end of Clock Generator/Distribution - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# -# CONFIG_ADF4350 is not set -CONFIG_ADF4371=m -# end of Phase-Locked Loop (PLL) frequency synthesizers -# end of Frequency Synthesizers DDS/PLL - -# -# Digital gyroscope sensors -# -# CONFIG_ADIS16080 is not set -# CONFIG_ADIS16130 is not set -# CONFIG_ADIS16136 is not set -# CONFIG_ADIS16260 is not set -# CONFIG_ADXRS450 is not set -# CONFIG_BMG160 is not set -# CONFIG_FXAS21002C is not set -CONFIG_HID_SENSOR_GYRO_3D=m -# CONFIG_MPU3050_I2C is not set -# CONFIG_IIO_ST_GYRO_3AXIS is not set -# CONFIG_ITG3200 is not set -# end of Digital gyroscope sensors - -# -# Health Sensors -# - -# -# Heart Rate Monitors -# -# CONFIG_AFE4403 is not set -# CONFIG_AFE4404 is not set -# CONFIG_MAX30100 is not set -# CONFIG_MAX30102 is not set -# end of Heart Rate Monitors -# end of Health Sensors - -# -# Humidity sensors -# -# CONFIG_AM2315 is not set -CONFIG_DHT11=m -# CONFIG_HDC100X is not set -# CONFIG_HID_SENSOR_HUMIDITY is not set -# CONFIG_HTS221 is not set -# CONFIG_HTU21 is not set -# CONFIG_SI7005 is not set -# CONFIG_SI7020 is not set -# end of Humidity sensors - -# -# Inertial measurement units -# -# CONFIG_ADIS16400 is not set -# CONFIG_ADIS16460 is not set -# CONFIG_ADIS16480 is not set -# CONFIG_BMI160_I2C is not set -# CONFIG_BMI160_SPI is not set -# CONFIG_FXOS8700_I2C is not set -# CONFIG_FXOS8700_SPI is not set -# CONFIG_KMX61 is not set -# CONFIG_INV_MPU6050_I2C is not set -# CONFIG_INV_MPU6050_SPI is not set -# CONFIG_IIO_ST_LSM6DSX is not set -# end of Inertial measurement units - -# -# Light sensors -# -CONFIG_ACPI_ALS=m -# CONFIG_ADJD_S311 is not set -# CONFIG_ADUX1020 is not set -# CONFIG_AL3010 is not set -# CONFIG_AL3320A is not set -# CONFIG_APDS9300 is not set -# CONFIG_APDS9960 is not set -# CONFIG_BH1750 is not set -CONFIG_BH1780=m -# CONFIG_CM32181 is not set -# CONFIG_CM3232 is not set -# CONFIG_CM3323 is not set -# CONFIG_CM3605 is not set -# CONFIG_CM36651 is not set -# CONFIG_GP2AP002 is not set -# CONFIG_GP2AP020A00F is not set -# CONFIG_IQS621_ALS is not set -# CONFIG_SENSORS_ISL29018 is not set -# CONFIG_SENSORS_ISL29028 is not set -# CONFIG_ISL29125 is not set -CONFIG_HID_SENSOR_ALS=m -CONFIG_HID_SENSOR_PROX=m -# CONFIG_JSA1212 is not set -# CONFIG_RPR0521 is not set -# CONFIG_LTR501 is not set -# CONFIG_LV0104CS is not set -# CONFIG_MAX44000 is not set -# CONFIG_MAX44009 is not set -# CONFIG_NOA1305 is not set -# CONFIG_OPT3001 is not set -# CONFIG_PA12203001 is not set -# CONFIG_SI1133 is not set -# CONFIG_SI1145 is not set -# CONFIG_STK3310 is not set -# CONFIG_ST_UVIS25 is not set -# CONFIG_TCS3414 is not set -# CONFIG_TCS3472 is not set -# CONFIG_SENSORS_TSL2563 is not set -# CONFIG_TSL2583 is not set -# CONFIG_TSL2772 is not set -# CONFIG_TSL4531 is not set -# CONFIG_US5182D is not set -# CONFIG_VCNL4000 is not set -# CONFIG_VCNL4035 is not set -# CONFIG_VEML6030 is not set -# CONFIG_VEML6070 is not set -# CONFIG_VL6180 is not set -# CONFIG_ZOPT2201 is not set -# end of Light sensors - -# -# Magnetometer sensors -# -# CONFIG_AK8974 is not set -# CONFIG_AK8975 is not set -# CONFIG_AK09911 is not set -# CONFIG_BMC150_MAGN_I2C is not set -# CONFIG_BMC150_MAGN_SPI is not set -# CONFIG_MAG3110 is not set -CONFIG_HID_SENSOR_MAGNETOMETER_3D=m -# CONFIG_MMC35240 is not set -# CONFIG_IIO_ST_MAGN_3AXIS is not set -# CONFIG_SENSORS_HMC5843_I2C is not set -# CONFIG_SENSORS_HMC5843_SPI is not set -# CONFIG_SENSORS_RM3100_I2C is not set -# CONFIG_SENSORS_RM3100_SPI is not set -# end of Magnetometer sensors - -# -# Multiplexers -# -# CONFIG_IIO_MUX is not set -# end of Multiplexers - -# -# Inclinometer sensors -# -CONFIG_HID_SENSOR_INCLINOMETER_3D=m -CONFIG_HID_SENSOR_DEVICE_ROTATION=m -# end of Inclinometer sensors - -# -# Triggers - standalone -# -# CONFIG_IIO_INTERRUPT_TRIGGER is not set -# CONFIG_IIO_SYSFS_TRIGGER is not set -# end of Triggers - standalone - -# -# Linear and angular position sensors -# -# CONFIG_IQS624_POS is not set -# end of Linear and angular position sensors - -# -# Digital potentiometers -# -# CONFIG_AD5272 is not set -# CONFIG_DS1803 is not set -# CONFIG_MAX5432 is not set -# CONFIG_MAX5481 is not set -# CONFIG_MAX5487 is not set -# CONFIG_MCP4018 is not set -# CONFIG_MCP4131 is not set -# CONFIG_MCP4531 is not set -# CONFIG_MCP41010 is not set -# CONFIG_TPL0102 is not set -# end of Digital potentiometers - -# -# Digital potentiostats -# -# CONFIG_LMP91000 is not set -# end of Digital potentiostats - -# -# Pressure sensors -# -# CONFIG_ABP060MG is not set -# CONFIG_BMP280 is not set -# CONFIG_DLHL60D is not set -CONFIG_DPS310=m -CONFIG_HID_SENSOR_PRESS=m -# CONFIG_HP03 is not set -# CONFIG_ICP10100 is not set -# CONFIG_MPL115_I2C is not set -# CONFIG_MPL115_SPI is not set -# CONFIG_MPL3115 is not set -# CONFIG_MS5611 is not set -# CONFIG_MS5637 is not set -# CONFIG_IIO_ST_PRESS is not set -# CONFIG_T5403 is not set -# CONFIG_HP206C is not set -# CONFIG_ZPA2326 is not set -# end of Pressure sensors - -# -# Lightning sensors -# -# CONFIG_AS3935 is not set -# end of Lightning sensors - -# -# Proximity and distance sensors -# -# CONFIG_ISL29501 is not set -# CONFIG_LIDAR_LITE_V2 is not set -# CONFIG_MB1232 is not set -# CONFIG_PING is not set -# CONFIG_RFD77402 is not set -# CONFIG_SRF04 is not set -# CONFIG_SX9500 is not set -# CONFIG_SRF08 is not set -# CONFIG_VL53L0X_I2C is not set -# end of Proximity and distance sensors - -# -# Resolver to digital converters -# -# CONFIG_AD2S90 is not set -# CONFIG_AD2S1200 is not set -# end of Resolver to digital converters - -# -# Temperature sensors -# -# CONFIG_IQS620AT_TEMP is not set -# CONFIG_LTC2983 is not set -# CONFIG_MAXIM_THERMOCOUPLE is not set -# CONFIG_HID_SENSOR_TEMP is not set -# CONFIG_MLX90614 is not set -# CONFIG_MLX90632 is not set -# CONFIG_TMP006 is not set -# CONFIG_TMP007 is not set -# CONFIG_TSYS01 is not set -# CONFIG_TSYS02D is not set -# CONFIG_MAX31856 is not set -# end of Temperature sensors - -# CONFIG_NTB is not set -# CONFIG_VME_BUS is not set -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -# CONFIG_PWM_DEBUG is not set -CONFIG_PWM_BCM2835=m -# CONFIG_PWM_CROS_EC is not set -# CONFIG_PWM_FSL_FTM is not set -# CONFIG_PWM_HIBVT is not set -# CONFIG_PWM_IMX1 is not set -# CONFIG_PWM_IMX27 is not set -# CONFIG_PWM_IMX_TPM is not set -CONFIG_PWM_MESON=m -# CONFIG_PWM_PCA9685 is not set -CONFIG_PWM_ROCKCHIP=m -CONFIG_PWM_SUN4I=m -CONFIG_PWM_TEGRA=m - -# -# IRQ chip support -# -CONFIG_IRQCHIP=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GIC_PM=y -CONFIG_ARM_GIC_MAX_NR=1 -CONFIG_ARM_GIC_V2M=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -CONFIG_ARM_GIC_V3_ITS_PCI=y -# CONFIG_AL_FIC is not set -CONFIG_HISILICON_IRQ_MBIGEN=y -CONFIG_MADERA_IRQ=m -CONFIG_IMX_GPCV2=y -CONFIG_MVEBU_GICP=y -CONFIG_MVEBU_ICU=y -CONFIG_MVEBU_ODMI=y -CONFIG_MVEBU_PIC=y -CONFIG_MVEBU_SEI=y -CONFIG_PARTITION_PERCPU=y -CONFIG_QCOM_IRQ_COMBINER=y -CONFIG_MESON_IRQ_GPIO=y -# CONFIG_QCOM_PDC is not set -CONFIG_IMX_IRQSTEER=y -CONFIG_IMX_INTMUX=y -# end of IRQ chip support - -# CONFIG_IPACK_BUS is not set -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_BRCMSTB_RESCAL=y -CONFIG_RESET_IMX7=y -CONFIG_RESET_INTEL_GW=y -CONFIG_RESET_MESON=y -# CONFIG_RESET_MESON_AUDIO_ARB is not set -# CONFIG_RESET_QCOM_AOSS is not set -# CONFIG_RESET_QCOM_PDC is not set -CONFIG_RESET_SCMI=y -CONFIG_RESET_SIMPLE=y -CONFIG_RESET_SUNXI=y -# CONFIG_RESET_TI_SYSCON is not set -CONFIG_COMMON_RESET_HI3660=y -CONFIG_COMMON_RESET_HI6220=y -CONFIG_RESET_TEGRA_BPMP=y - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PHY_MIPI_DPHY=y -CONFIG_PHY_XGENE=m -CONFIG_PHY_SUN4I_USB=m -# CONFIG_PHY_SUN6I_MIPI_DPHY is not set -# CONFIG_PHY_SUN9I_USB is not set -CONFIG_PHY_SUN50I_USB3=m -CONFIG_PHY_MESON8B_USB2=m -CONFIG_PHY_MESON_GXL_USB2=y -CONFIG_PHY_MESON_GXL_USB3=y -CONFIG_PHY_MESON_G12A_USB2=y -CONFIG_PHY_MESON_G12A_USB3_PCIE=y -CONFIG_PHY_MESON_AXG_PCIE=y -CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y -# CONFIG_BCM_KONA_USB2_PHY is not set -CONFIG_PHY_CADENCE_TORRENT=m -# CONFIG_PHY_CADENCE_DPHY is not set -# CONFIG_PHY_CADENCE_SIERRA is not set -CONFIG_PHY_FSL_IMX8MQ_USB=m -CONFIG_PHY_MIXEL_MIPI_DPHY=m -CONFIG_PHY_HI6220_USB=m -CONFIG_PHY_HI3660_USB=m -# CONFIG_PHY_HISTB_COMBPHY is not set -# CONFIG_PHY_HISI_INNO_USB2 is not set -CONFIG_PHY_MVEBU_A3700_COMPHY=m -CONFIG_PHY_MVEBU_A3700_UTMI=m -CONFIG_PHY_MVEBU_A38X_COMPHY=m -CONFIG_PHY_MVEBU_CP110_COMPHY=m -# CONFIG_PHY_PXA_28NM_HSIC is not set -# CONFIG_PHY_PXA_28NM_USB2 is not set -# CONFIG_PHY_CPCAP_USB is not set -# CONFIG_PHY_MAPPHONE_MDM6600 is not set -# CONFIG_PHY_OCELOT_SERDES is not set -CONFIG_PHY_QCOM_APQ8064_SATA=m -CONFIG_PHY_QCOM_IPQ806X_SATA=m -CONFIG_PHY_QCOM_PCIE2=m -CONFIG_PHY_QCOM_QMP=m -CONFIG_PHY_QCOM_QUSB2=m -CONFIG_PHY_QCOM_UFS=m -CONFIG_PHY_QCOM_UFS_14NM=m -CONFIG_PHY_QCOM_USB_HS=m -CONFIG_PHY_QCOM_USB_HSIC=m -CONFIG_PHY_QCOM_USB_HS_28NM=m -CONFIG_PHY_QCOM_USB_SS=m -# CONFIG_PHY_ROCKCHIP_DP is not set -CONFIG_PHY_ROCKCHIP_EMMC=m -# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set -CONFIG_PHY_ROCKCHIP_INNO_USB2=m -# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set -CONFIG_PHY_ROCKCHIP_PCIE=m -# CONFIG_PHY_ROCKCHIP_TYPEC is not set -# CONFIG_PHY_ROCKCHIP_USB is not set -# CONFIG_PHY_SAMSUNG_USB2 is not set -CONFIG_PHY_TEGRA_XUSB=m -CONFIG_PHY_TEGRA194_P2U=m -CONFIG_PHY_TUSB1210=m -# CONFIG_PHY_INTEL_EMMC is not set -# end of PHY Subsystem - -# CONFIG_POWERCAP is not set -# CONFIG_MCB is not set - -# -# Performance monitor support -# -# CONFIG_ARM_CCI_PMU is not set -# CONFIG_ARM_CCN is not set -CONFIG_ARM_PMU=y -CONFIG_ARM_PMU_ACPI=y -CONFIG_ARM_SMMU_V3_PMU=m -# CONFIG_ARM_DSU_PMU is not set -CONFIG_FSL_IMX8_DDR_PMU=m -# CONFIG_HISI_PMU is not set -# CONFIG_QCOM_L2_PMU is not set -# CONFIG_QCOM_L3_PMU is not set -CONFIG_THUNDERX2_PMU=m -# CONFIG_XGENE_PMU is not set -# CONFIG_ARM_SPE_PMU is not set -# end of Performance monitor support - -CONFIG_RAS=y - -# -# Android -# -# CONFIG_ANDROID is not set -# end of Android - -CONFIG_LIBNVDIMM=y -CONFIG_BLK_DEV_PMEM=y -CONFIG_ND_BLK=y -CONFIG_ND_CLAIM=y -CONFIG_ND_BTT=y -CONFIG_BTT=y -CONFIG_OF_PMEM=y -CONFIG_DAX_DRIVER=y -CONFIG_DAX=y -CONFIG_DEV_DAX=m -CONFIG_DEV_DAX_HMEM=m -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -CONFIG_NVMEM_IMX_IIM=m -CONFIG_NVMEM_IMX_OCOTP=m -CONFIG_NVMEM_IMX_OCOTP_SCU=m -CONFIG_QCOM_QFPROM=m -CONFIG_NVMEM_SPMI_SDAM=m -# CONFIG_ROCKCHIP_EFUSE is not set -CONFIG_ROCKCHIP_OTP=m -CONFIG_NVMEM_SUNXI_SID=m -# CONFIG_MESON_EFUSE is not set -# CONFIG_MESON_MX_EFUSE is not set -CONFIG_NVMEM_SNVS_LPGPR=m - -# -# HW tracing support -# -# CONFIG_STM is not set -# CONFIG_INTEL_TH is not set -# end of HW tracing support - -# CONFIG_FPGA is not set -# CONFIG_FSI is not set -CONFIG_TEE=m - -# -# TEE drivers -# -CONFIG_OPTEE=m -CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1 -# end of TEE drivers - -CONFIG_MULTIPLEXER=m - -# -# Multiplexer drivers -# -CONFIG_MUX_ADG792A=m -CONFIG_MUX_ADGS1408=m -CONFIG_MUX_GPIO=m -CONFIG_MUX_MMIO=m -# end of Multiplexer drivers - -CONFIG_PM_OPP=y -# CONFIG_SIOX is not set -# CONFIG_SLIMBUS is not set -# CONFIG_INTERCONNECT is not set -# CONFIG_COUNTER is not set -# CONFIG_MOST is not set -# end of Device Drivers - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y -CONFIG_FS_IOMAP=y -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -CONFIG_EXT4_FS=y -CONFIG_EXT4_USE_FOR_EXT2=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -# CONFIG_XFS_ONLINE_SCRUB is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -CONFIG_OCFS2_FS_STATS=y -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -# CONFIG_BTRFS_FS_REF_VERIFY is not set -CONFIG_NILFS2_FS=m -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -CONFIG_F2FS_FS_SECURITY=y -# CONFIG_F2FS_CHECK_FS is not set -# CONFIG_F2FS_IO_TRACE is not set -# CONFIG_F2FS_FAULT_INJECTION is not set -# CONFIG_F2FS_FS_COMPRESSION is not set -CONFIG_FS_DAX=y -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -CONFIG_EXPORTFS_BLOCK_OPS=y -CONFIG_FILE_LOCKING=y -CONFIG_MANDATORY_FILE_LOCKING=y -# CONFIG_FS_ENCRYPTION is not set -CONFIG_FS_VERITY=y -# CONFIG_FS_VERITY_DEBUG is not set -# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -CONFIG_PRINT_QUOTA_WARNING=y -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_AUTOFS4_FS=m -CONFIG_AUTOFS_FS=m -CONFIG_FUSE_FS=m -CONFIG_CUSE=m -CONFIG_VIRTIO_FS=m -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y -# CONFIG_OVERLAY_FS_INDEX is not set -# CONFIG_OVERLAY_FS_XINO_AUTO is not set -# CONFIG_OVERLAY_FS_METACOPY is not set - -# -# Caches -# -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=m -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set -# end of Caches - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -# end of CD-ROM/DVD Filesystems - -# -# DOS/FAT/EXFAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -CONFIG_FAT_DEFAULT_UTF8=y -CONFIG_EXFAT_FS=m -CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -# end of DOS/FAT/EXFAT/NT Filesystems - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_VMCORE=y -# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_CHILDREN=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_MEMFD_CREATE=y -CONFIG_ARCH_HAS_GIGANTIC_PAGE=y -CONFIG_CONFIGFS_FS=m -CONFIG_EFIVAR_FS=m -# end of Pseudo filesystems - -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ORANGEFS_FS is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_ECRYPT_FS=m -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_UBIFS_FS=m -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UBIFS_FS_ZSTD=y -# CONFIG_UBIFS_ATIME_SUPPORT is not set -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_SECURITY=y -CONFIG_UBIFS_FS_AUTHENTICATION=y -# CONFIG_CRAMFS is not set -CONFIG_SQUASHFS=m -CONFIG_SQUASHFS_FILE_CACHE=y -# CONFIG_SQUASHFS_FILE_DIRECT is not set -CONFIG_SQUASHFS_DECOMP_SINGLE=y -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -CONFIG_SQUASHFS_LZ4=y -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -CONFIG_SQUASHFS_ZSTD=y -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_QNX6FS_FS=m -# CONFIG_QNX6FS_DEBUG is not set -CONFIG_ROMFS_FS=m -# CONFIG_ROMFS_BACKED_BY_BLOCK is not set -# CONFIG_ROMFS_BACKED_BY_MTD is not set -CONFIG_ROMFS_BACKED_BY_BOTH=y -CONFIG_ROMFS_ON_BLOCK=y -CONFIG_ROMFS_ON_MTD=y -CONFIG_PSTORE=y -CONFIG_PSTORE_DEFLATE_COMPRESS=m -# CONFIG_PSTORE_LZO_COMPRESS is not set -# CONFIG_PSTORE_LZ4_COMPRESS is not set -# CONFIG_PSTORE_LZ4HC_COMPRESS is not set -# CONFIG_PSTORE_842_COMPRESS is not set -# CONFIG_PSTORE_ZSTD_COMPRESS is not set -CONFIG_PSTORE_COMPRESS=y -CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y -CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" -# CONFIG_PSTORE_CONSOLE is not set -# CONFIG_PSTORE_PMSG is not set -# CONFIG_PSTORE_FTRACE is not set -CONFIG_PSTORE_RAM=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_ZIP is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V2=m -CONFIG_NFS_V3=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_PNFS_FILE_LAYOUT=m -CONFIG_PNFS_BLOCK=m -CONFIG_PNFS_FLEXFILE_LAYOUT=m -CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" -# CONFIG_NFS_V4_1_MIGRATION is not set -CONFIG_NFS_V4_SECURITY_LABEL=y -CONFIG_NFS_FSCACHE=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFS_DEBUG=y -# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_PNFS=y -CONFIG_NFSD_BLOCKLAYOUT=y -# CONFIG_NFSD_SCSILAYOUT is not set -# CONFIG_NFSD_FLEXFILELAYOUT is not set -CONFIG_NFSD_V4_SECURITY_LABEL=y -CONFIG_GRACE_PERIOD=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BACKCHANNEL=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y -CONFIG_SUNRPC_DEBUG=y -CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_CEPH_FS=m -CONFIG_CEPH_FSCACHE=y -CONFIG_CEPH_FS_POSIX_ACL=y -CONFIG_CEPH_FS_SECURITY_LABEL=y -CONFIG_CIFS=m -# CONFIG_CIFS_STATS2 is not set -CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set -CONFIG_CIFS_DFS_UPCALL=y -# CONFIG_CIFS_SMB_DIRECT is not set -CONFIG_CIFS_FSCACHE=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_AFS_FSCACHE=y -# CONFIG_AFS_DEBUG_CURSOR is not set -CONFIG_9P_FS=m -CONFIG_9P_FSCACHE=y -CONFIG_9P_FS_POSIX_ACL=y -CONFIG_9P_FS_SECURITY=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_DLM_DEBUG=y -# CONFIG_UNICODE is not set -CONFIG_IO_WQ=y -# end of File systems - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_REQUEST_CACHE=y -# CONFIG_PERSISTENT_KEYRINGS is not set -# CONFIG_BIG_KEYS is not set -# CONFIG_ENCRYPTED_KEYS is not set -# CONFIG_KEY_DH_OPERATIONS is not set -CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SECURITY=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -# CONFIG_SECURITY_INFINIBAND is not set -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_PATH=y -CONFIG_LSM_MMAP_MIN_ADDR=32768 -CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_HARDENED_USERCOPY_FALLBACK=y -# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set -# CONFIG_FORTIFY_SOURCE is not set -# CONFIG_STATIC_USERMODEHELPER is not set -CONFIG_SECURITY_SELINUX=y -# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set -# CONFIG_SECURITY_SELINUX_DISABLE is not set -CONFIG_SECURITY_SELINUX_DEVELOP=y -CONFIG_SECURITY_SELINUX_AVC_STATS=y -CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0 -CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9 -CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256 -# CONFIG_SECURITY_SMACK is not set -CONFIG_SECURITY_TOMOYO=y -CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 -CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 -# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set -CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" -CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" -# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set -CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_HASH=y -CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y -# CONFIG_SECURITY_APPARMOR_DEBUG is not set -# CONFIG_SECURITY_LOADPIN is not set -CONFIG_SECURITY_YAMA=y -# CONFIG_SECURITY_SAFESETID is not set -# CONFIG_SECURITY_LOCKDOWN_LSM is not set -CONFIG_INTEGRITY=y -CONFIG_INTEGRITY_SIGNATURE=y -CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y -CONFIG_INTEGRITY_TRUSTED_KEYRING=y -CONFIG_INTEGRITY_AUDIT=y -# CONFIG_IMA is not set -# CONFIG_EVM is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_APPARMOR=y -# CONFIG_DEFAULT_SECURITY_DAC is not set -CONFIG_LSM="yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo" - -# -# Kernel hardening options -# - -# -# Memory initialization -# -CONFIG_INIT_STACK_NONE=y -CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y -# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set -# end of Memory initialization -# end of Kernel hardening options -# end of Security options - -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_SKCIPHER=m -CONFIG_CRYPTO_SKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=m -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=m -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m -# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set -# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_SIMD=m -CONFIG_CRYPTO_ENGINE=m - -# -# Public-key cryptography -# -CONFIG_CRYPTO_RSA=y -CONFIG_CRYPTO_DH=m -CONFIG_CRYPTO_ECC=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_ECRDSA=m -CONFIG_CRYPTO_CURVE25519=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_AEGIS128_SIMD=y -CONFIG_CRYPTO_SEQIV=m -CONFIG_CRYPTO_ECHAINIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_CFB=m -CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_OFB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -# CONFIG_CRYPTO_KEYWRAP is not set -CONFIG_CRYPTO_NHPOLY1305=m -CONFIG_CRYPTO_ADIANTUM=m -CONFIG_CRYPTO_ESSIV=m - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_XXHASH=m -CONFIG_CRYPTO_BLAKE2B=m -CONFIG_CRYPTO_BLAKE2S=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_GHASH=m -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_SHA3=m -# CONFIG_CRYPTO_SM3 is not set -CONFIG_CRYPTO_STREEBOG=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_TI is not set -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_BLOWFISH_COMMON=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST_COMMON=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=y -# CONFIG_CRYPTO_842 is not set -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m -CONFIG_CRYPTO_ZSTD=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=m -CONFIG_CRYPTO_DRBG_HMAC=y -# CONFIG_CRYPTO_DRBG_HASH is not set -# CONFIG_CRYPTO_DRBG_CTR is not set -CONFIG_CRYPTO_DRBG=m -CONFIG_CRYPTO_JITTERENTROPY=m -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -# CONFIG_CRYPTO_STATS is not set -CONFIG_CRYPTO_HASH_INFO=y - -# -# Crypto library routines -# -CONFIG_CRYPTO_LIB_AES=y -CONFIG_CRYPTO_LIB_ARC4=m -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=m -CONFIG_CRYPTO_LIB_BLAKE2S=m -CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m -CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m -CONFIG_CRYPTO_LIB_CHACHA=m -CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m -CONFIG_CRYPTO_LIB_CURVE25519=m -CONFIG_CRYPTO_LIB_DES=m -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9 -CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m -CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m -CONFIG_CRYPTO_LIB_POLY1305=m -CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_ALLWINNER=y -CONFIG_CRYPTO_DEV_SUN4I_SS=m -# CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG is not set -CONFIG_CRYPTO_DEV_SUN8I_CE=m -# CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG is not set -CONFIG_CRYPTO_DEV_SUN8I_SS=m -# CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG is not set -CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=m -CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=m -CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=m -CONFIG_CRYPTO_DEV_FSL_CAAM=m -# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set -CONFIG_CRYPTO_DEV_FSL_CAAM_JR=m -CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9 -# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set -CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y -CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y -CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y -CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y -CONFIG_CRYPTO_DEV_SAHARA=m -CONFIG_CRYPTO_DEV_ATMEL_I2C=m -CONFIG_CRYPTO_DEV_ATMEL_ECC=m -CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m -# CONFIG_CRYPTO_DEV_CCP is not set -# CONFIG_CRYPTO_DEV_MXS_DCP is not set -CONFIG_CRYPTO_DEV_CPT=m -CONFIG_CAVIUM_CPT=m -CONFIG_CRYPTO_DEV_NITROX=m -CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m -CONFIG_CRYPTO_DEV_MARVELL=m -CONFIG_CRYPTO_DEV_MARVELL_CESA=m -# CONFIG_CRYPTO_DEV_OCTEONTX_CPT is not set -# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set -CONFIG_CRYPTO_DEV_QCE=m -CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y -CONFIG_CRYPTO_DEV_QCE_SHA=y -CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y -# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set -# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set -CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512 -CONFIG_CRYPTO_DEV_QCOM_RNG=m -# CONFIG_CRYPTO_DEV_ROCKCHIP is not set -CONFIG_CRYPTO_DEV_CHELSIO=m -# CONFIG_CHELSIO_IPSEC_INLINE is not set -CONFIG_CRYPTO_DEV_VIRTIO=m -CONFIG_CRYPTO_DEV_SAFEXCEL=m -# CONFIG_CRYPTO_DEV_CCREE is not set -CONFIG_CRYPTO_DEV_HISI_SEC=m -CONFIG_CRYPTO_DEV_HISI_SEC2=m -CONFIG_CRYPTO_DEV_HISI_QM=m -# CONFIG_CRYPTO_DEV_HISI_ZIP is not set -CONFIG_CRYPTO_DEV_HISI_HPRE=m -CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m -# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y -CONFIG_X509_CERTIFICATE_PARSER=y -CONFIG_PKCS8_PRIVATE_KEY_PARSER=m -CONFIG_PKCS7_MESSAGE_PARSER=y -# CONFIG_PKCS7_TEST_KEY is not set -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set - -# -# Certificates for signature checking -# -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set -# CONFIG_SECONDARY_TRUSTED_KEYRING is not set -# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -# end of Certificates for signature checking - -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=m -CONFIG_RAID6_PQ_BENCHMARK=y -CONFIG_PACKING=y -CONFIG_BITREVERSE=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_CORDIC=m -CONFIG_RATIONAL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_STMP_DEVICE=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_HAS_FAST_MULTIPLIER=y -# CONFIG_INDIRECT_PIO is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC64=m -# CONFIG_CRC4 is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -CONFIG_CRC8=m -CONFIG_XXHASH=y -CONFIG_AUDIT_GENERIC=y -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -CONFIG_AUDIT_COMPAT_GENERIC=y -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=m -CONFIG_LZ4HC_COMPRESS=m -CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=m -CONFIG_XZ_DEC=y -# CONFIG_XZ_DEC_X86 is not set -# CONFIG_XZ_DEC_POWERPC is not set -# CONFIG_XZ_DEC_IA64 is not set -# CONFIG_XZ_DEC_ARM is not set -# CONFIG_XZ_DEC_ARMTHUMB is not set -# CONFIG_XZ_DEC_SPARC is not set -# CONFIG_XZ_DEC_TEST is not set -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_ENC8=y -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_BTREE=y -CONFIG_INTERVAL_TREE=y -CONFIG_XARRAY_MULTI=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_DECLARE_COHERENT=y -CONFIG_ARCH_HAS_SETUP_DMA_OPS=y -CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y -CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y -CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y -CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y -CONFIG_DMA_VIRT_OPS=y -CONFIG_SWIOTLB=y -CONFIG_DMA_NONCOHERENT_MMAP=y -CONFIG_DMA_REMAP=y -CONFIG_DMA_DIRECT_REMAP=y -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=64 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 -# CONFIG_DMA_API_DEBUG is not set -CONFIG_SGL_ALLOC=y -CONFIG_CHECK_SIGNATURE=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_LRU_CACHE=m -CONFIG_CLZ_TAB=y -CONFIG_IRQ_POLL=y -CONFIG_MPILIB=y -CONFIG_SIGNATURE=y -CONFIG_DIMLIB=y -CONFIG_LIBFDT=y -CONFIG_OID_REGISTRY=y -CONFIG_UCS2_STRING=y -CONFIG_HAVE_GENERIC_VDSO=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_FONT_SUPPORT=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -CONFIG_FONT_6x10=y -# CONFIG_FONT_10x18 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -CONFIG_FONT_TER16x32=y -CONFIG_SG_SPLIT=y -CONFIG_SG_POOL=y -CONFIG_ARCH_HAS_PMEM_API=y -CONFIG_MEMREGION=y -CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y -CONFIG_SBITMAP=y -# CONFIG_STRING_SELFTEST is not set -# end of Library routines - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -# CONFIG_PRINTK_CALLER is not set -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 -CONFIG_CONSOLE_LOGLEVEL_QUIET=4 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -CONFIG_BOOT_PRINTK_DELAY=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_SYMBOLIC_ERRNAME=y -CONFIG_DEBUG_BUGVERBOSE=y -# end of printk and dmesg options - -# -# Compile-time checks and compiler options -# -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_INFO_REDUCED is not set -# CONFIG_DEBUG_INFO_SPLIT is not set -# CONFIG_DEBUG_INFO_DWARF4 is not set -# CONFIG_DEBUG_INFO_BTF is not set -# CONFIG_GDB_SCRIPTS is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=2048 -CONFIG_STRIP_ASM_SYMS=y -# CONFIG_READABLE_ASM is not set -# CONFIG_HEADERS_INSTALL is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_ARCH_WANT_FRAME_POINTERS=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -# end of Compile-time checks and compiler options - -# -# Generic Kernel Debugging Instruments -# -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 -CONFIG_MAGIC_SYSRQ_SERIAL=y -CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE="" -CONFIG_DEBUG_FS=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y -# CONFIG_UBSAN is not set -# end of Generic Kernel Debugging Instruments - -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MISC=y - -# -# Memory Debugging -# -CONFIG_PAGE_EXTENSION=y -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_PAGE_OWNER is not set -CONFIG_PAGE_POISONING=y -CONFIG_PAGE_POISONING_NO_SANITY=y -# CONFIG_PAGE_POISONING_ZERO is not set -# CONFIG_DEBUG_PAGE_REF is not set -# CONFIG_DEBUG_RODATA_TEST is not set -CONFIG_GENERIC_PTDUMP=y -# CONFIG_PTDUMP_DEBUGFS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_SCHED_STACK_END_CHECK=y -# CONFIG_DEBUG_VM is not set -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -# CONFIG_DEBUG_VIRTUAL is not set -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_PER_CPU_MAPS is not set -CONFIG_HAVE_ARCH_KASAN=y -CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y -CONFIG_CC_HAS_KASAN_GENERIC=y -# CONFIG_KASAN is not set -CONFIG_KASAN_STACK=1 -# end of Memory Debugging - -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Oops, Lockups and Hangs -# -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_LOCKUP_DETECTOR=y -CONFIG_SOFTLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -# CONFIG_WQ_WATCHDOG is not set -# CONFIG_TEST_LOCKUP is not set -# end of Debug Oops, Lockups and Hangs - -# -# Scheduler Debugging -# -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -CONFIG_SCHEDSTATS=y -# end of Scheduler Debugging - -# CONFIG_DEBUG_TIMEKEEPING is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -CONFIG_LOCK_DEBUGGING_SUPPORT=y -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_LOCK_TORTURE_TEST is not set -# CONFIG_WW_MUTEX_SELFTEST is not set -# end of Lock Debugging (spinlocks, mutexes, etc...) - -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_HAVE_DEBUG_BUGVERBOSE=y - -# -# Debug kernel data structures -# -CONFIG_DEBUG_LIST=y -# CONFIG_DEBUG_PLIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -CONFIG_BUG_ON_DATA_CORRUPTION=y -# end of Debug kernel data structures - -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -# CONFIG_RCU_PERF_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# end of RCU Debugging - -# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -# CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACER_MAX_TRACE=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -# CONFIG_BOOTTIME_TRACING is not set -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -CONFIG_DYNAMIC_FTRACE=y -CONFIG_DYNAMIC_FTRACE_WITH_REGS=y -# CONFIG_FUNCTION_PROFILER is not set -CONFIG_STACK_TRACER=y -# CONFIG_PREEMPTIRQ_EVENTS is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_HWLAT_TRACER is not set -CONFIG_FTRACE_SYSCALLS=y -CONFIG_TRACER_SNAPSHOT=y -# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_KPROBE_EVENTS=y -CONFIG_UPROBE_EVENTS=y -CONFIG_BPF_EVENTS=y -CONFIG_DYNAMIC_EVENTS=y -CONFIG_PROBE_EVENTS=y -# CONFIG_BPF_KPROBE_OVERRIDE is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_HIST_TRIGGERS is not set -# CONFIG_TRACE_EVENT_INJECT is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_PREEMPTIRQ_DELAY_TEST is not set -# CONFIG_KPROBE_EVENT_GEN_TEST is not set -# CONFIG_SAMPLES is not set -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -CONFIG_STRICT_DEVMEM=y -CONFIG_IO_STRICT_DEVMEM=y - -# -# arm64 Debugging -# -# CONFIG_PID_IN_CONTEXTIDR is not set -# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set -# CONFIG_DEBUG_WX is not set -# CONFIG_DEBUG_EFI is not set -# CONFIG_ARM64_RELOC_TEST is not set -# CONFIG_CORESIGHT is not set -# end of arm64 Debugging - -# -# Kernel Testing and Coverage -# -# CONFIG_KUNIT is not set -CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_PM_NOTIFIER_ERROR_INJECT=m -# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set -CONFIG_FUNCTION_ERROR_INJECTION=y -# CONFIG_FAULT_INJECTION is not set -CONFIG_ARCH_HAS_KCOV=y -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -# CONFIG_KCOV is not set -CONFIG_RUNTIME_TESTING_MENU=y -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_MIN_HEAP is not set -# CONFIG_TEST_SORT is not set -# CONFIG_KPROBES_SANITY_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_REED_SOLOMON_TEST is not set -# CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_PERCPU_TEST is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_ASYNC_RAID6_TEST is not set -# CONFIG_TEST_HEXDUMP is not set -# CONFIG_TEST_STRING_HELPERS is not set -CONFIG_TEST_STRSCPY=m -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_TEST_PRINTF is not set -# CONFIG_TEST_BITMAP is not set -# CONFIG_TEST_BITFIELD is not set -# CONFIG_TEST_UUID is not set -CONFIG_TEST_XARRAY=m -# CONFIG_TEST_OVERFLOW is not set -# CONFIG_TEST_RHASHTABLE is not set -# CONFIG_TEST_HASH is not set -# CONFIG_TEST_IDA is not set -# CONFIG_TEST_LKM is not set -CONFIG_TEST_VMALLOC=m -CONFIG_TEST_USER_COPY=m -CONFIG_TEST_BPF=m -CONFIG_TEST_BLACKHOLE_DEV=m -# CONFIG_FIND_BIT_BENCHMARK is not set -CONFIG_TEST_FIRMWARE=m -# CONFIG_TEST_SYSCTL is not set -# CONFIG_TEST_UDELAY is not set -CONFIG_TEST_STATIC_KEYS=m -# CONFIG_TEST_KMOD is not set -# CONFIG_TEST_MEMCAT_P is not set -# CONFIG_TEST_STACKINIT is not set -# CONFIG_TEST_MEMINIT is not set -# CONFIG_MEMTEST is not set -# end of Kernel Testing and Coverage -# end of Kernel hacking diff --git a/gnu/packages/aux-files/linux-libre/5.7-i686.conf b/gnu/packages/aux-files/linux-libre/5.7-i686.conf deleted file mode 100644 index 45a50395ac..0000000000 --- a/gnu/packages/aux-files/linux-libre/5.7-i686.conf +++ /dev/null @@ -1,10516 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/i386 5.7.12-gnu Kernel Configuration -# - -# -# Compiler: gcc (Debian 8.3.0-6) 8.3.0 -# -CONFIG_CC_IS_GCC=y -CONFIG_GCC_VERSION=80300 -CONFIG_LD_VERSION=231010000 -CONFIG_CLANG_VERSION=0 -CONFIG_CC_CAN_LINK=y -CONFIG_CC_HAS_ASM_GOTO=y -CONFIG_CC_HAS_ASM_INLINE=y -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_TABLE_SORT=y -CONFIG_THREAD_INFO_IN_TASK=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_BUILD_SALT="" -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_BZIP2 is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_XZ is not set -# CONFIG_KERNEL_LZO is not set -# CONFIG_KERNEL_LZ4 is not set -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_USELIB=y -CONFIG_AUDIT=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y -CONFIG_GENERIC_IRQ_RESERVATION_MODE=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -# CONFIG_GENERIC_IRQ_DEBUGFS is not set -# end of IRQ subsystem - -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_ARCH_CLOCKSOURCE_INIT=y -CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y -CONFIG_GENERIC_CMOS_UPDATE=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -# end of Timers subsystem - -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_IRQ_TIME_ACCOUNTING is not set -CONFIG_SCHED_THERMAL_PRESSURE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_PSI=y -# CONFIG_PSI_DEFAULT_DISABLED is not set -# end of CPU/Task time and stats accounting - -CONFIG_CPU_ISOLATION=y - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -CONFIG_TREE_SRCU=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RCU_NEED_SEGCBLIST=y -# end of RCU Subsystem - -CONFIG_BUILD_BIN2C=y -# CONFIG_IKCONFIG is not set -# CONFIG_IKHEADERS is not set -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y - -# -# Scheduler features -# -# CONFIG_UCLAMP_TASK is not set -# end of Scheduler features - -CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y -CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set -CONFIG_MEMCG_KMEM=y -CONFIG_BLK_CGROUP=y -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_CGROUP_PIDS=y -# CONFIG_CGROUP_RDMA is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_PERF=y -CONFIG_CGROUP_BPF=y -# CONFIG_CGROUP_DEBUG is not set -CONFIG_SOCK_CGROUP_DATA=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_TIME_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -CONFIG_CHECKPOINT_RESTORE=y -CONFIG_SCHED_AUTOGROUP=y -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -CONFIG_BOOT_CONFIG=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_HAVE_UID16=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_HAVE_PCSPKR_PLATFORM=y -CONFIG_BPF=y -CONFIG_EXPERT=y -CONFIG_UID16=y -CONFIG_MULTIUSER=y -CONFIG_SGETMASK_SYSCALL=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_FHANDLE=y -CONFIG_POSIX_TIMERS=y -CONFIG_PRINTK=y -CONFIG_PRINTK_NMI=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_FUTEX_PI=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_IO_URING=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_MEMBARRIER=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_BASE_RELATIVE=y -CONFIG_BPF_SYSCALL=y -CONFIG_USERFAULTFD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_RSEQ=y -# CONFIG_DEBUG_RSEQ is not set -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -# CONFIG_PC104 is not set - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# end of Kernel Performance Events And Counters - -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_MEMCG_SYSFS_ON is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_SLAB_MERGE_DEFAULT=y -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SLAB_FREELIST_HARDENED=y -CONFIG_SHUFFLE_PAGE_ALLOCATOR=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SYSTEM_DATA_VERIFICATION=y -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -# end of General setup - -CONFIG_X86_32=y -CONFIG_FORCE_DYNAMIC_FTRACE=y -CONFIG_X86=y -CONFIG_INSTRUCTION_DECODER=y -CONFIG_OUTPUT_FORMAT="elf32-i386" -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_MMU=y -CONFIG_ARCH_MMAP_RND_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_BITS_MAX=16 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_BUG=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_HAS_CPU_RELAX=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_ARCH_HAS_FILTER_PGPROT=y -CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y -CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_HAVE_INTEL_TXT=y -CONFIG_X86_32_SMP=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_CC_HAS_SANE_STACKPROTECTOR=y - -# -# Processor type and features -# -CONFIG_ZONE_DMA=y -CONFIG_SMP=y -CONFIG_X86_FEATURE_NAMES=y -CONFIG_X86_MPPARSE=y -# CONFIG_GOLDFISH is not set -CONFIG_RETPOLINE=y -# CONFIG_X86_CPU_RESCTRL is not set -# CONFIG_X86_BIGSMP is not set -CONFIG_X86_EXTENDED_PLATFORM=y -# CONFIG_X86_GOLDFISH is not set -CONFIG_X86_INTEL_MID=y -# CONFIG_X86_INTEL_QUARK is not set -CONFIG_X86_INTEL_LPSS=y -CONFIG_X86_AMD_PLATFORM_DEVICE=y -CONFIG_IOSF_MBI=y -CONFIG_IOSF_MBI_DEBUG=y -# CONFIG_X86_RDC321X is not set -# CONFIG_X86_32_NON_STANDARD is not set -CONFIG_X86_32_IRIS=m -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -CONFIG_PARAVIRT_XXL=y -# CONFIG_PARAVIRT_DEBUG is not set -CONFIG_PARAVIRT_SPINLOCKS=y -CONFIG_X86_HV_CALLBACK_VECTOR=y -CONFIG_XEN=y -CONFIG_XEN_PV=y -CONFIG_XEN_PV_SMP=y -CONFIG_XEN_DOM0=y -CONFIG_XEN_PVHVM=y -CONFIG_XEN_PVHVM_SMP=y -CONFIG_XEN_SAVE_RESTORE=y -# CONFIG_XEN_DEBUG_FS is not set -CONFIG_XEN_PVH=y -CONFIG_KVM_GUEST=y -CONFIG_ARCH_CPUIDLE_HALTPOLL=y -CONFIG_PVH=y -CONFIG_KVM_DEBUG_FS=y -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -CONFIG_PARAVIRT_CLOCK=y -# CONFIG_M486SX is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -CONFIG_M686=y -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MELAN is not set -# CONFIG_MGEODEGX1 is not set -# CONFIG_MGEODE_LX is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_MVIAC7 is not set -# CONFIG_MCORE2 is not set -# CONFIG_MATOM is not set -CONFIG_X86_GENERIC=y -CONFIG_X86_INTERNODE_CACHE_SHIFT=6 -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_INTEL_USERCOPY=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_TSC=y -CONFIG_X86_CMPXCHG64=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=6 -CONFIG_X86_DEBUGCTLMSR=y -CONFIG_IA32_FEAT_CTL=y -CONFIG_X86_VMX_FEATURE_NAMES=y -CONFIG_PROCESSOR_SELECT=y -CONFIG_CPU_SUP_INTEL=y -CONFIG_CPU_SUP_CYRIX_32=y -CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_HYGON=y -CONFIG_CPU_SUP_CENTAUR=y -CONFIG_CPU_SUP_TRANSMETA_32=y -CONFIG_CPU_SUP_UMC_32=y -CONFIG_CPU_SUP_ZHAOXIN=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_APB_TIMER=y -CONFIG_DMI=y -CONFIG_NR_CPUS_RANGE_BEGIN=2 -CONFIG_NR_CPUS_RANGE_END=8 -CONFIG_NR_CPUS_DEFAULT=8 -CONFIG_NR_CPUS=8 -CONFIG_SCHED_SMT=y -CONFIG_SCHED_MC=y -CONFIG_SCHED_MC_PRIO=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y -CONFIG_X86_MCE=y -# CONFIG_X86_MCELOG_LEGACY is not set -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -# CONFIG_X86_ANCIENT_MCE is not set -CONFIG_X86_MCE_THRESHOLD=y -# CONFIG_X86_MCE_INJECT is not set -CONFIG_X86_THERMAL_VECTOR=y - -# -# Performance monitoring -# -CONFIG_PERF_EVENTS_INTEL_UNCORE=y -CONFIG_PERF_EVENTS_INTEL_RAPL=y -CONFIG_PERF_EVENTS_INTEL_CSTATE=y -CONFIG_PERF_EVENTS_AMD_POWER=m -# end of Performance monitoring - -# CONFIG_X86_LEGACY_VM86 is not set -CONFIG_X86_16BIT=y -CONFIG_X86_ESPFIX32=y -CONFIG_X86_IOPL_IOPERM=y -# CONFIG_TOSHIBA is not set -CONFIG_I8K=m -CONFIG_X86_REBOOTFIXUPS=y -CONFIG_MICROCODE=y -CONFIG_MICROCODE_INTEL=y -CONFIG_MICROCODE_AMD=y -CONFIG_MICROCODE_OLD_INTERFACE=y -CONFIG_X86_MSR=m -CONFIG_X86_CPUID=m -# CONFIG_NOHIGHMEM is not set -# CONFIG_HIGHMEM4G is not set -CONFIG_HIGHMEM64G=y -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_HIGHMEM=y -CONFIG_X86_PAE=y -# CONFIG_X86_CPA_STATISTICS is not set -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ILLEGAL_POINTER_VALUE=0 -CONFIG_X86_PMEM_LEGACY_DEVICE=y -CONFIG_X86_PMEM_LEGACY=y -CONFIG_HIGHPTE=y -CONFIG_X86_CHECK_BIOS_CORRUPTION=y -CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y -CONFIG_X86_RESERVE_LOW=64 -CONFIG_MTRR=y -CONFIG_MTRR_SANITIZER=y -CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 -CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 -CONFIG_X86_PAT=y -CONFIG_ARCH_USES_PG_UNCACHED=y -CONFIG_ARCH_RANDOM=y -CONFIG_X86_SMAP=y -CONFIG_X86_UMIP=y -CONFIG_X86_INTEL_TSX_MODE_OFF=y -# CONFIG_X86_INTEL_TSX_MODE_ON is not set -# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set -CONFIG_EFI=y -CONFIG_EFI_STUB=y -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_KEXEC=y -CONFIG_CRASH_DUMP=y -CONFIG_KEXEC_JUMP=y -CONFIG_PHYSICAL_START=0x1000000 -CONFIG_RELOCATABLE=y -CONFIG_RANDOMIZE_BASE=y -CONFIG_X86_NEED_RELOCS=y -CONFIG_PHYSICAL_ALIGN=0x1000000 -CONFIG_HOTPLUG_CPU=y -# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set -# CONFIG_DEBUG_HOTPLUG_CPU0 is not set -# CONFIG_COMPAT_VDSO is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_MODIFY_LDT_SYSCALL=y -# end of Processor type and features - -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y - -# -# Power management and ACPI options -# -CONFIG_ARCH_HIBERNATION_HEADER=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SUSPEND_SKIP_SYNC is not set -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="" -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -CONFIG_PM_WAKELOCKS=y -CONFIG_PM_WAKELOCKS_LIMIT=100 -CONFIG_PM_WAKELOCKS_GC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_PM_SLEEP_DEBUG=y -# CONFIG_DPM_WATCHDOG is not set -CONFIG_PM_TRACE=y -CONFIG_PM_TRACE_RTC=y -CONFIG_PM_CLK=y -CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y -# CONFIG_ENERGY_MODEL is not set -CONFIG_ARCH_SUPPORTS_ACPI=y -CONFIG_ACPI=y -CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y -CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y -CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y -# CONFIG_ACPI_DEBUGGER is not set -CONFIG_ACPI_SPCR_TABLE=y -CONFIG_ACPI_SLEEP=y -# CONFIG_ACPI_PROCFS_POWER is not set -CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y -CONFIG_ACPI_EC_DEBUGFS=m -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_FAN=y -CONFIG_ACPI_TAD=m -CONFIG_ACPI_DOCK=y -CONFIG_ACPI_CPU_FREQ_PSS=y -CONFIG_ACPI_PROCESSOR_CSTATE=y -CONFIG_ACPI_PROCESSOR_IDLE=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_IPMI=m -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_PROCESSOR_AGGREGATOR=m -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_CUSTOM_DSDT_FILE="" -CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y -CONFIG_ACPI_TABLE_UPGRADE=y -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_PCI_SLOT=y -CONFIG_ACPI_CONTAINER=y -CONFIG_ACPI_HOTPLUG_MEMORY=y -CONFIG_ACPI_HOTPLUG_IOAPIC=y -CONFIG_ACPI_SBS=m -CONFIG_ACPI_HED=y -# CONFIG_ACPI_CUSTOM_METHOD is not set -CONFIG_ACPI_BGRT=y -# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set -CONFIG_HAVE_ACPI_APEI=y -CONFIG_HAVE_ACPI_APEI_NMI=y -CONFIG_ACPI_APEI=y -CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_PCIEAER=y -CONFIG_ACPI_APEI_EINJ=m -# CONFIG_ACPI_APEI_ERST_DEBUG is not set -CONFIG_DPTF_POWER=m -CONFIG_ACPI_WATCHDOG=y -CONFIG_ACPI_EXTLOG=m -# CONFIG_PMIC_OPREGION is not set -CONFIG_ACPI_CONFIGFS=m -CONFIG_X86_PM_TIMER=y -CONFIG_SFI=y -CONFIG_X86_APM_BOOT=y -CONFIG_APM=m -# CONFIG_APM_IGNORE_USER_SUSPEND is not set -# CONFIG_APM_DO_ENABLE is not set -# CONFIG_APM_CPU_IDLE is not set -# CONFIG_APM_DISPLAY_BLANK is not set -# CONFIG_APM_ALLOW_INTS is not set - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y - -# -# CPU frequency scaling drivers -# -CONFIG_X86_INTEL_PSTATE=y -CONFIG_X86_PCC_CPUFREQ=y -CONFIG_X86_ACPI_CPUFREQ=y -CONFIG_X86_ACPI_CPUFREQ_CPB=y -CONFIG_X86_SFI_CPUFREQ=m -CONFIG_X86_POWERNOW_K6=m -CONFIG_X86_POWERNOW_K7=m -CONFIG_X86_POWERNOW_K7_ACPI=y -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_AMD_FREQ_SENSITIVITY=m -CONFIG_X86_GX_SUSPMOD=m -CONFIG_X86_SPEEDSTEP_CENTRINO=y -CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y -CONFIG_X86_SPEEDSTEP_ICH=y -CONFIG_X86_SPEEDSTEP_SMI=y -CONFIG_X86_P4_CLOCKMOD=m -CONFIG_X86_CPUFREQ_NFORCE2=y -CONFIG_X86_LONGRUN=m -CONFIG_X86_LONGHAUL=m -# CONFIG_X86_E_POWERSAVER is not set - -# -# shared options -# -CONFIG_X86_SPEEDSTEP_LIB=y -CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y -# end of CPU Frequency scaling - -# -# CPU Idle -# -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_GOV_TEO=y -CONFIG_CPU_IDLE_GOV_HALTPOLL=y -CONFIG_HALTPOLL_CPUIDLE=m -# end of CPU Idle - -CONFIG_INTEL_IDLE=y -# end of Power management and ACPI options - -# -# Bus options (PCI etc.) -# -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GOMMCONFIG is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -CONFIG_PCI_XEN=y -# CONFIG_PCI_CNB20LE_QUIRK is not set -# CONFIG_ISA_BUS is not set -CONFIG_ISA_DMA_API=y -CONFIG_ISA=y -CONFIG_SCx200=m -CONFIG_SCx200HR_TIMER=m -CONFIG_ALIX=y -CONFIG_NET5501=y -CONFIG_GEOS=y -CONFIG_AMD_NB=y -# CONFIG_X86_SYSFB is not set -# end of Bus options (PCI etc.) - -# -# Binary Emulations -# -CONFIG_COMPAT_32=y -# end of Binary Emulations - -CONFIG_HAVE_ATOMIC_IOMAP=y - -# -# Firmware Drivers -# -CONFIG_EDD=y -CONFIG_EDD_OFF=y -CONFIG_FIRMWARE_MEMMAP=y -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=m -CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y -CONFIG_ISCSI_IBFT_FIND=y -CONFIG_ISCSI_IBFT=m -CONFIG_FW_CFG_SYSFS=m -# CONFIG_FW_CFG_SYSFS_CMDLINE is not set -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=y -CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=m -# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set -CONFIG_EFI_RUNTIME_MAP=y -# CONFIG_EFI_FAKE_MEMMAP is not set -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_EFI_BOOTLOADER_CONTROL=m -CONFIG_EFI_CAPSULE_LOADER=y -CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH=y -# CONFIG_EFI_TEST is not set -CONFIG_APPLE_PROPERTIES=y -CONFIG_RESET_ATTACK_MITIGATION=y -# CONFIG_EFI_RCI2_TABLE is not set -# CONFIG_EFI_DISABLE_PCI_DMA is not set -# end of EFI (Extensible Firmware Interface) Support - -CONFIG_UEFI_CPER=y -CONFIG_UEFI_CPER_X86=y -CONFIG_EFI_DEV_PATH_PARSER=y -CONFIG_EFI_EARLYCON=y -CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y - -# -# Tegra firmware driver -# -# end of Tegra firmware driver -# end of Firmware Drivers - -CONFIG_HAVE_KVM=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_KVM_IRQ_ROUTING=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_KVM_MMIO=y -CONFIG_KVM_ASYNC_PF=y -CONFIG_HAVE_KVM_MSI=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_KVM_VFIO=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_HAVE_KVM_IRQ_BYPASS=y -CONFIG_HAVE_KVM_NO_POLL=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=m -# CONFIG_KVM_WERROR is not set -CONFIG_KVM_INTEL=m -CONFIG_KVM_AMD=m -# CONFIG_KVM_MMU_AUDIT is not set -CONFIG_AS_AVX512=y -CONFIG_AS_SHA1_NI=y -CONFIG_AS_SHA256_NI=y - -# -# General architecture-dependent options -# -CONFIG_CRASH_CORE=y -CONFIG_KEXEC_CORE=y -CONFIG_HOTPLUG_SMT=y -CONFIG_OPROFILE=m -# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_OPROFILE_NMI_TIMER=y -CONFIG_KPROBES=y -CONFIG_JUMP_LABEL=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_OPTPROBES=y -CONFIG_KPROBES_ON_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_KRETPROBES=y -CONFIG_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_KPROBES_ON_FTRACE=y -CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SET_DIRECT_MAP=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_HAVE_ASM_MODVERSIONS=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y -CONFIG_HAVE_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_PERF_EVENTS_NMI=y -CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y -CONFIG_MMU_GATHER_TABLE_FREE=y -CONFIG_MMU_GATHER_RCU_TABLE_FREE=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_STACKLEAK=y -CONFIG_HAVE_STACKPROTECTOR=y -CONFIG_CC_HAS_STACKPROTECTOR_NONE=y -CONFIG_STACKPROTECTOR=y -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MOVE_PMD=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_HAVE_EXIT_THREAD=y -CONFIG_ARCH_MMAP_RND_BITS=8 -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_ISA_BUS_API=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OLD_SIGACTION=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y -CONFIG_ARCH_USE_MEMREMAP_PROT=y -# CONFIG_LOCK_EVENT_COUNTS is not set -CONFIG_ARCH_HAS_MEM_ENCRYPT=y - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# end of GCOV-based kernel profiling - -CONFIG_HAVE_GCC_PLUGINS=y -# end of General architecture-dependent options - -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_ASM_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set -CONFIG_UNUSED_SYMBOLS=y -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_RQ_ALLOC_TIME=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_CGROUP_RWSTAT=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_BLK_DEV_INTEGRITY_T10=y -CONFIG_BLK_DEV_ZONED=y -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_DEV_THROTTLING_LOW is not set -CONFIG_BLK_CMDLINE_PARSER=y -CONFIG_BLK_WBT=y -# CONFIG_BLK_CGROUP_IOLATENCY is not set -CONFIG_BLK_CGROUP_IOCOST=y -CONFIG_BLK_WBT_MQ=y -CONFIG_BLK_DEBUG_FS=y -CONFIG_BLK_DEBUG_FS_ZONED=y -# CONFIG_BLK_SED_OPAL is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -CONFIG_AIX_PARTITION=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -CONFIG_ATARI_PARTITION=y -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -CONFIG_SGI_PARTITION=y -CONFIG_ULTRIX_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_KARMA_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SYSV68_PARTITION=y -CONFIG_CMDLINE_PARTITION=y -# end of Partition Types - -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_MQ_VIRTIO=y -CONFIG_BLK_MQ_RDMA=y -CONFIG_BLK_PM=y - -# -# IO Schedulers -# -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=m -CONFIG_IOSCHED_BFQ=m -# CONFIG_BFQ_GROUP_IOSCHED is not set -# end of IO Schedulers - -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PADATA=y -CONFIG_ASN1=y -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_INLINE_READ_UNLOCK=y -CONFIG_INLINE_READ_UNLOCK_IRQ=y -CONFIG_INLINE_WRITE_UNLOCK=y -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y -CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y -CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y -CONFIG_FREEZER=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y -# end of Executable file formats - -# -# Memory Management options -# -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_STATIC=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_FAST_GUP=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_MEMORY_HOTPLUG=y -CONFIG_MEMORY_HOTPLUG_SPARSE=y -# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set -CONFIG_MEMORY_HOTREMOVE=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_PAGE_REPORTING=y -CONFIG_MIGRATION=y -CONFIG_CONTIG_ALLOC=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_MMU_NOTIFIER=y -CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y -# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -CONFIG_CLEANCACHE=y -CONFIG_FRONTSWAP=y -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -CONFIG_ZSWAP=y -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set -CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set -CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" -CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y -# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set -# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set -CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" -# CONFIG_ZSWAP_DEFAULT_ON is not set -CONFIG_ZPOOL=y -CONFIG_ZBUD=y -CONFIG_Z3FOLD=m -CONFIG_ZSMALLOC=y -CONFIG_PGTABLE_MAPPING=y -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_IDLE_PAGE_TRACKING=y -CONFIG_HMM_MIRROR=y -CONFIG_FRAME_VECTOR=y -# CONFIG_PERCPU_STATS is not set -# CONFIG_GUP_BENCHMARK is not set -CONFIG_GUP_GET_PTE_LOW_HIGH=y -# CONFIG_READ_ONLY_THP_FOR_FS is not set -CONFIG_ARCH_HAS_PTE_SPECIAL=y -CONFIG_MAPPING_DIRTY_HELPERS=y -# end of Memory Management options - -CONFIG_NET=y -CONFIG_NET_INGRESS=y -CONFIG_NET_EGRESS=y -CONFIG_NET_REDIRECT=y -CONFIG_SKB_EXTENSIONS=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=m -CONFIG_UNIX=y -CONFIG_UNIX_SCM=y -CONFIG_UNIX_DIAG=m -CONFIG_TLS=m -# CONFIG_TLS_DEVICE is not set -# CONFIG_TLS_TOE is not set -CONFIG_XFRM=y -CONFIG_XFRM_OFFLOAD=y -CONFIG_XFRM_ALGO=m -CONFIG_XFRM_USER=m -CONFIG_XFRM_INTERFACE=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -CONFIG_XFRM_STATISTICS=y -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -# CONFIG_SMC is not set -# CONFIG_XDP_SOCKETS is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_FIB_TRIE_STATS=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE_COMMON=y -CONFIG_IP_MROUTE=y -# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_ESP_OFFLOAD=m -# CONFIG_INET_ESPINTCP is not set -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m -CONFIG_INET_RAW_DIAG=m -# CONFIG_INET_DIAG_DESTROY is not set -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_NV=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_CONG_DCTCP=m -CONFIG_TCP_CONG_CDG=m -CONFIG_TCP_CONG_BBR=m -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_ESP_OFFLOAD=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -CONFIG_IPV6_FOU=m -CONFIG_IPV6_FOU_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y -# CONFIG_IPV6_SEG6_LWTUNNEL is not set -# CONFIG_IPV6_SEG6_HMAC is not set -# CONFIG_IPV6_RPL_LWTUNNEL is not set -CONFIG_NETLABEL=y -CONFIG_MPTCP=y -CONFIG_MPTCP_IPV6=y -# CONFIG_MPTCP_HMAC_TEST is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_FAMILY_BRIDGE=y -CONFIG_NETFILTER_FAMILY_ARP=y -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NETFILTER_NETLINK_OSF=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -CONFIG_NF_LOG_NETDEV=m -CONFIG_NETFILTER_CONNCOUNT=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -CONFIG_NF_CT_NETLINK_HELPER=m -CONFIG_NETFILTER_NETLINK_GLUE_CT=y -CONFIG_NF_NAT=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=y -CONFIG_NF_NAT_MASQUERADE=y -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_INET=y -CONFIG_NF_TABLES_NETDEV=y -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -CONFIG_NFT_FLOW_OFFLOAD=m -CONFIG_NFT_COUNTER=m -CONFIG_NFT_CONNLIMIT=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_TUNNEL=m -CONFIG_NFT_OBJREF=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NFT_FIB=m -CONFIG_NFT_FIB_INET=m -CONFIG_NFT_XFRM=m -CONFIG_NFT_SOCKET=m -CONFIG_NFT_OSF=m -CONFIG_NFT_TPROXY=m -CONFIG_NFT_SYNPROXY=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -CONFIG_NFT_FIB_NETDEV=m -CONFIG_NF_FLOW_TABLE_INET=m -CONFIG_NF_FLOW_TABLE=m -CONFIG_NETFILTER_XTABLES=m - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -CONFIG_NETFILTER_XT_TARGET_AUDIT=m -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -# end of Core Netfilter Configuration - -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -CONFIG_IP_SET_HASH_IPMAC=m -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_MH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS MH scheduler -# -CONFIG_IP_VS_MH_TAB_INDEX=12 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_SOCKET_IPV4=m -CONFIG_NF_TPROXY_IPV4=m -CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NFT_FIB_IPV4=m -CONFIG_NF_TABLES_ARP=y -CONFIG_NF_FLOW_TABLE_IPV4=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -# end of IP: Netfilter Configuration - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_SOCKET_IPV6=m -CONFIG_NF_TPROXY_IPV6=m -CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NFT_FIB_IPV6=m -CONFIG_NF_FLOW_TABLE_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_SRH=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m -# end of IPv6: Netfilter Configuration - -CONFIG_NF_DEFRAG_IPV6=m - -# -# DECnet: Netfilter Configuration -# -CONFIG_DECNET_NF_GRABULATOR=m -# end of DECnet: Netfilter Configuration - -CONFIG_NF_TABLES_BRIDGE=m -CONFIG_NFT_BRIDGE_META=m -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_NF_CONNTRACK_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -# CONFIG_BPFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -# CONFIG_IP_DCCP_CCID3 is not set -# end of DCCP CCIDs Configuration - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# end of DCCP Kernel Hacking - -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_INET_SCTP_DIAG=m -CONFIG_RDS=m -CONFIG_RDS_RDMA=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set -CONFIG_TIPC=m -CONFIG_TIPC_MEDIA_IB=y -CONFIG_TIPC_MEDIA_UDP=y -CONFIG_TIPC_CRYPTO=y -CONFIG_TIPC_DIAG=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_MRP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y -CONFIG_NET_DSA=m -CONFIG_NET_DSA_TAG_8021Q=m -CONFIG_NET_DSA_TAG_AR9331=m -CONFIG_NET_DSA_TAG_BRCM_COMMON=m -CONFIG_NET_DSA_TAG_BRCM=m -CONFIG_NET_DSA_TAG_BRCM_PREPEND=m -CONFIG_NET_DSA_TAG_GSWIP=m -CONFIG_NET_DSA_TAG_DSA=m -CONFIG_NET_DSA_TAG_EDSA=m -CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_OCELOT=m -CONFIG_NET_DSA_TAG_QCA=m -CONFIG_NET_DSA_TAG_LAN9303=m -CONFIG_NET_DSA_TAG_SJA1105=m -CONFIG_NET_DSA_TAG_TRAILER=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -CONFIG_DECNET=m -# CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_LTPC=m -CONFIG_COPS=m -CONFIG_COPS_DAYNA=y -CONFIG_COPS_TANGENT=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_PHONET=m -CONFIG_6LOWPAN=m -# CONFIG_6LOWPAN_DEBUGFS is not set -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m -CONFIG_6LOWPAN_GHC_UDP=m -CONFIG_6LOWPAN_GHC_ICMPV6=m -CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m -CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m -CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m -CONFIG_IEEE802154=m -CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_CBS=m -CONFIG_NET_SCH_ETF=m -CONFIG_NET_SCH_TAPRIO=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_SKBPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_CAKE=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_FQ_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -CONFIG_NET_SCH_ETS=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_CLS_MATCHALL=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_EMATCH_CANID=m -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_EMATCH_IPT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_SAMPLE=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_MPLS=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -CONFIG_NET_ACT_CTINFO=m -CONFIG_NET_ACT_SKBMOD=m -CONFIG_NET_ACT_IFE=m -CONFIG_NET_ACT_TUNNEL_KEY=m -CONFIG_NET_ACT_CT=m -CONFIG_NET_IFE_SKBMARK=m -CONFIG_NET_IFE_SKBPRIO=m -CONFIG_NET_IFE_SKBTCINDEX=m -# CONFIG_NET_TC_SKB_EXT is not set -CONFIG_NET_SCH_FIFO=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=y -CONFIG_BATMAN_ADV=m -# CONFIG_BATMAN_ADV_BATMAN_V is not set -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -CONFIG_BATMAN_ADV_DEBUGFS=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_BATMAN_ADV_SYSFS=y -# CONFIG_BATMAN_ADV_TRACING is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_OPENVSWITCH_GENEVE=m -CONFIG_VSOCKETS=m -CONFIG_VSOCKETS_DIAG=m -CONFIG_VSOCKETS_LOOPBACK=m -CONFIG_VMWARE_VMCI_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS_COMMON=m -CONFIG_HYPERV_VSOCKETS=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=m -CONFIG_MPLS_ROUTING=m -CONFIG_MPLS_IPTUNNEL=m -CONFIG_NET_NSH=m -CONFIG_HSR=m -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_L3_MASTER_DEV=y -CONFIG_NET_NCSI=y -# CONFIG_NCSI_OEM_CMD_GET_MAC is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -# CONFIG_BPF_JIT is not set -# CONFIG_BPF_STREAM_PARSER is not set -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NET_DROP_MONITOR is not set -# end of Network testing -# end of Networking options - -CONFIG_HAMRADIO=y - -# -# Packet Radio protocols -# -CONFIG_AX25=m -CONFIG_AX25_DAMA_SLAVE=y -CONFIG_NETROM=m -CONFIG_ROSE=m - -# -# AX.25 network device drivers -# -CONFIG_MKISS=m -CONFIG_6PACK=m -CONFIG_BPQETHER=m -CONFIG_SCC=m -# CONFIG_SCC_DELAY is not set -# CONFIG_SCC_TRXECHO is not set -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -CONFIG_BAYCOM_PAR=m -CONFIG_BAYCOM_EPP=m -CONFIG_YAM=m -# end of AX.25 network device drivers - -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m -CONFIG_CAN_J1939=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -CONFIG_CAN_VXCAN=m -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -CONFIG_CAN_JANZ_ICAN3=m -CONFIG_CAN_KVASER_PCIEFD=m -CONFIG_PCH_CAN=m -CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m -CONFIG_CAN_C_CAN_PCI=m -CONFIG_CAN_CC770=m -CONFIG_CAN_CC770_ISA=m -CONFIG_CAN_CC770_PLATFORM=m -CONFIG_CAN_IFI_CANFD=m -CONFIG_CAN_M_CAN=m -CONFIG_CAN_M_CAN_PLATFORM=m -CONFIG_CAN_M_CAN_TCAN4X5X=m -CONFIG_CAN_PEAK_PCIEFD=m -CONFIG_CAN_SJA1000=m -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_EMS_PCMCIA=m -CONFIG_CAN_F81601=m -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_PEAK_PCMCIA=m -CONFIG_CAN_PLX_PCI=m -CONFIG_CAN_SJA1000_ISA=m -CONFIG_CAN_SJA1000_PLATFORM=m -CONFIG_CAN_TSCAN1=m -CONFIG_CAN_SOFTING=m -CONFIG_CAN_SOFTING_CS=m - -# -# CAN SPI interfaces -# -CONFIG_CAN_HI311X=m -CONFIG_CAN_MCP251X=m -# end of CAN SPI interfaces - -# -# CAN USB interfaces -# -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -CONFIG_CAN_MCBA_USB=m -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_UCAN=m -# end of CAN USB interfaces - -# CONFIG_CAN_DEBUG_DEVICES is not set -# end of CAN Device Drivers - -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_CMTP=m -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -CONFIG_BT_6LOWPAN=m -# CONFIG_BT_LEDS is not set -# CONFIG_BT_SELFTEST is not set -CONFIG_BT_DEBUGFS=y - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_QCA=m -CONFIG_BT_HCIBTUSB=m -# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_MTK=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_SERDEV=y -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_NOKIA=m -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIUART_3WIRE=y -CONFIG_BT_HCIUART_INTEL=y -CONFIG_BT_HCIUART_BCM=y -CONFIG_BT_HCIUART_RTL=y -CONFIG_BT_HCIUART_QCA=y -CONFIG_BT_HCIUART_AG6XX=y -CONFIG_BT_HCIUART_MRVL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_BT_ATH3K=m -CONFIG_BT_MTKSDIO=m -CONFIG_BT_MTKUART=m -CONFIG_BT_HCIRSI=m -# end of Bluetooth device drivers - -CONFIG_AF_RXRPC=m -CONFIG_AF_RXRPC_IPV6=y -# CONFIG_AF_RXRPC_INJECT_LOSS is not set -# CONFIG_AF_RXRPC_DEBUG is not set -# CONFIG_RXKAD is not set -CONFIG_AF_KCM=m -CONFIG_STREAM_PARSER=y -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y -CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y -CONFIG_CFG80211_DEFAULT_PS=y -CONFIG_CFG80211_DEBUGFS=y -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_CFG80211_WEXT_EXPORT=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -CONFIG_MAC80211_DEBUGFS=y -CONFIG_MAC80211_MESSAGE_TRACING=y -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=y -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -CONFIG_RFKILL_GPIO=m -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -CONFIG_NET_9P_XEN=m -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set -CONFIG_CAIF=m -# CONFIG_CAIF_DEBUG is not set -CONFIG_CAIF_NETDEV=m -CONFIG_CAIF_USB=m -CONFIG_CEPH_LIB=m -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set -CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -CONFIG_NFC_NCI=m -CONFIG_NFC_NCI_SPI=m -CONFIG_NFC_NCI_UART=m -CONFIG_NFC_HCI=m -CONFIG_NFC_SHDLC=y - -# -# Near Field Communication (NFC) devices -# -CONFIG_NFC_TRF7970A=m -CONFIG_NFC_SIM=m -CONFIG_NFC_PORT100=m -CONFIG_NFC_FDP=m -CONFIG_NFC_FDP_I2C=m -CONFIG_NFC_PN544=m -CONFIG_NFC_PN544_I2C=m -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -CONFIG_NFC_PN533_I2C=m -CONFIG_NFC_PN532_UART=m -CONFIG_NFC_MICROREAD=m -CONFIG_NFC_MICROREAD_I2C=m -CONFIG_NFC_MRVL=m -CONFIG_NFC_MRVL_USB=m -CONFIG_NFC_MRVL_UART=m -CONFIG_NFC_MRVL_I2C=m -CONFIG_NFC_MRVL_SPI=m -CONFIG_NFC_ST21NFCA=m -CONFIG_NFC_ST21NFCA_I2C=m -CONFIG_NFC_ST_NCI=m -CONFIG_NFC_ST_NCI_I2C=m -CONFIG_NFC_ST_NCI_SPI=m -CONFIG_NFC_NXP_NCI=m -CONFIG_NFC_NXP_NCI_I2C=m -CONFIG_NFC_S3FWRN5=m -CONFIG_NFC_S3FWRN5_I2C=m -CONFIG_NFC_ST95HF=m -# end of Near Field Communication (NFC) devices - -CONFIG_PSAMPLE=m -CONFIG_NET_IFE=m -CONFIG_LWTUNNEL=y -CONFIG_LWTUNNEL_BPF=y -CONFIG_DST_CACHE=y -CONFIG_GRO_CELLS=y -CONFIG_NET_SOCK_MSG=y -CONFIG_NET_DEVLINK=y -CONFIG_PAGE_POOL=y -CONFIG_FAILOVER=y -CONFIG_ETHTOOL_NETLINK=y -CONFIG_HAVE_EBPF_JIT=y - -# -# Device Drivers -# -CONFIG_HAVE_EISA=y -CONFIG_EISA=y -CONFIG_EISA_VLB_PRIMING=y -CONFIG_EISA_PCI_EISA=y -CONFIG_EISA_VIRTUAL_ROOT=y -CONFIG_EISA_NAMES=y -CONFIG_HAVE_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCIEPORTBUS=y -CONFIG_HOTPLUG_PCI_PCIE=y -CONFIG_PCIEAER=y -# CONFIG_PCIEAER_INJECT is not set -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEASPM=y -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCIE_DPC=y -CONFIG_PCIE_PTM=y -# CONFIG_PCIE_BW is not set -# CONFIG_PCIE_EDR is not set -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_REALLOC_ENABLE_AUTO=y -CONFIG_PCI_STUB=m -# CONFIG_PCI_PF_STUB is not set -CONFIG_XEN_PCIDEV_FRONTEND=m -CONFIG_PCI_ATS=y -CONFIG_PCI_LOCKLESS_CONFIG=y -CONFIG_PCI_IOV=y -CONFIG_PCI_PRI=y -CONFIG_PCI_PASID=y -CONFIG_PCI_LABEL=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_COMPAQ=m -CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y -CONFIG_HOTPLUG_PCI_IBM=m -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_HOTPLUG_PCI_ACPI_IBM=m -CONFIG_HOTPLUG_PCI_CPCI=y -CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m -CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m -CONFIG_HOTPLUG_PCI_SHPC=y - -# -# PCI controller drivers -# - -# -# DesignWare PCI Core Support -# -# CONFIG_PCIE_DW_PLAT_HOST is not set -# CONFIG_PCI_MESON is not set -# end of DesignWare PCI Core Support - -# -# Mobiveil PCIe Core Support -# -# end of Mobiveil PCIe Core Support - -# -# Cadence PCIe controllers support -# -# end of Cadence PCIe controllers support -# end of PCI controller drivers - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set -# end of PCI Endpoint - -# -# PCI switch controller drivers -# -CONFIG_PCI_SW_SWITCHTEC=m -# end of PCI switch controller drivers - -CONFIG_PCCARD=m -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -CONFIG_YENTA_O2=y -CONFIG_YENTA_RICOH=y -CONFIG_YENTA_TI=y -CONFIG_YENTA_ENE_TUNE=y -CONFIG_YENTA_TOSHIBA=y -CONFIG_PD6729=m -CONFIG_I82092=m -CONFIG_I82365=m -CONFIG_TCIC=m -CONFIG_PCMCIA_PROBE=y -CONFIG_PCCARD_NONSTATIC=y -CONFIG_RAPIDIO=y -CONFIG_RAPIDIO_TSI721=m -CONFIG_RAPIDIO_DISC_TIMEOUT=30 -# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set -CONFIG_RAPIDIO_DMA_ENGINE=y -# CONFIG_RAPIDIO_DEBUG is not set -CONFIG_RAPIDIO_ENUM_BASIC=m -CONFIG_RAPIDIO_CHMAN=m -CONFIG_RAPIDIO_MPORT_CDEV=m - -# -# RapidIO Switch drivers -# -CONFIG_RAPIDIO_TSI57X=m -CONFIG_RAPIDIO_CPS_XX=m -CONFIG_RAPIDIO_TSI568=m -CONFIG_RAPIDIO_CPS_GEN2=m -CONFIG_RAPIDIO_RXS_GEN3=m -# end of RapidIO Switch drivers - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y - -# -# Firmware loader -# -CONFIG_FW_LOADER=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_FW_LOADER_COMPRESS=y -CONFIG_FW_CACHE=y -# end of Firmware loader - -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set -# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set -CONFIG_SYS_HYPERVISOR=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_SPMI=m -CONFIG_REGMAP_W1=m -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_REGMAP_SCCB=m -CONFIG_REGMAP_I3C=m -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set -# end of Generic Driver Options - -# -# Bus devices -# -CONFIG_MHI_BUS=m -# end of Bus devices - -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_GNSS=m -CONFIG_GNSS_SERIAL=m -CONFIG_GNSS_MTK_SERIAL=m -CONFIG_GNSS_SIRF_SERIAL=m -CONFIG_GNSS_UBX_SERIAL=m -CONFIG_MTD=m -# CONFIG_MTD_TESTS is not set - -# -# Partition parsers -# -CONFIG_MTD_AR7_PARTS=m -CONFIG_MTD_CMDLINE_PARTS=m -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# end of Partition parsers - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_SM_FTL=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_SWAP=m -# CONFIG_MTD_PARTITIONED_MASTER is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -# end of RAM/ROM/Flash chip drivers - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -# CONFIG_MTD_PHYSMAP_COMPAT is not set -CONFIG_MTD_PHYSMAP_GPIO_ADDR=y -CONFIG_MTD_SBC_GXX=m -CONFIG_MTD_SCx200_DOCFLASH=m -CONFIG_MTD_AMD76XROM=m -CONFIG_MTD_ICHXROM=m -CONFIG_MTD_ESB2ROM=m -CONFIG_MTD_CK804XROM=m -CONFIG_MTD_SCB2_FLASH=m -CONFIG_MTD_NETtel=m -CONFIG_MTD_L440GX=m -CONFIG_MTD_PCI=m -CONFIG_MTD_PCMCIA=m -# CONFIG_MTD_PCMCIA_ANONYMOUS is not set -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m -# end of Mapping drivers for chip access - -# -# Self-contained MTD device drivers -# -CONFIG_MTD_PMC551=m -# CONFIG_MTD_PMC551_BUGFIX is not set -# CONFIG_MTD_PMC551_DEBUG is not set -CONFIG_MTD_DATAFLASH=m -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -CONFIG_MTD_DATAFLASH_OTP=y -CONFIG_MTD_MCHP23K256=m -CONFIG_MTD_SST25L=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTDRAM_TOTAL_SIZE=4096 -CONFIG_MTDRAM_ERASE_SIZE=128 -CONFIG_MTD_BLOCK2MTD=m - -# -# Disk-On-Chip Device Drivers -# -CONFIG_MTD_DOCG3=m -CONFIG_BCH_CONST_M=14 -CONFIG_BCH_CONST_T=4 -# end of Self-contained MTD device drivers - -CONFIG_MTD_NAND_CORE=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_GENERIC=m -# CONFIG_MTD_ONENAND_OTP is not set -CONFIG_MTD_ONENAND_2X_PROGRAM=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=m -# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set -CONFIG_MTD_RAW_NAND=m -# CONFIG_MTD_NAND_ECC_SW_BCH is not set - -# -# Raw/parallel NAND flash controllers -# -CONFIG_MTD_NAND_DENALI=m -CONFIG_MTD_NAND_DENALI_PCI=m -CONFIG_MTD_NAND_CAFE=m -CONFIG_MTD_NAND_CS553X=m -CONFIG_MTD_NAND_MXIC=m -CONFIG_MTD_NAND_GPIO=m -CONFIG_MTD_NAND_PLATFORM=m - -# -# Misc -# -CONFIG_MTD_SM_COMMON=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_RICOH=m -CONFIG_MTD_NAND_DISKONCHIP=m -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set -CONFIG_MTD_SPI_NAND=m - -# -# LPDDR & LPDDR2 PCM memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m -# end of LPDDR & LPDDR2 PCM memory drivers - -CONFIG_MTD_SPI_NOR=m -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_SPI_INTEL_SPI=m -CONFIG_SPI_INTEL_SPI_PCI=m -CONFIG_SPI_INTEL_SPI_PLATFORM=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_FASTMAP=y -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_HYPERBUS=m -# CONFIG_OF is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_SERIAL=m -CONFIG_PARPORT_PC_FIFO=y -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_PC_PCMCIA=m -CONFIG_PARPORT_AX88796=m -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_PNP=y -# CONFIG_PNP_DEBUG_MESSAGES is not set - -# -# Protocols -# -CONFIG_ISAPNP=y -CONFIG_PNPBIOS=y -CONFIG_PNPBIOS_PROC_FS=y -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_NULL_BLK=m -CONFIG_BLK_DEV_FD=m -CONFIG_CDROM=y -CONFIG_PARIDE=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m -CONFIG_ZRAM=m -# CONFIG_ZRAM_WRITEBACK is not set -# CONFIG_ZRAM_MEMORY_TRACKING is not set -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SX8=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m -CONFIG_XEN_BLKDEV_FRONTEND=y -CONFIG_XEN_BLKDEV_BACKEND=m -CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_RBD=m -CONFIG_BLK_DEV_RSXX=m - -# -# NVME Support -# -CONFIG_NVME_CORE=y -CONFIG_BLK_DEV_NVME=y -# CONFIG_NVME_MULTIPATH is not set -CONFIG_NVME_HWMON=y -CONFIG_NVME_FABRICS=m -CONFIG_NVME_RDMA=m -CONFIG_NVME_FC=m -CONFIG_NVME_TCP=m -CONFIG_NVME_TARGET=m -CONFIG_NVME_TARGET_LOOP=m -CONFIG_NVME_TARGET_RDMA=m -CONFIG_NVME_TARGET_FC=m -CONFIG_NVME_TARGET_FCLOOP=m -CONFIG_NVME_TARGET_TCP=m -# end of NVME Support - -# -# Misc devices -# -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_AD525X_DPOT=m -CONFIG_AD525X_DPOT_I2C=m -CONFIG_AD525X_DPOT_SPI=m -CONFIG_DUMMY_IRQ=m -CONFIG_IBM_ASM=m -CONFIG_PHANTOM=m -CONFIG_INTEL_MID_PTI=m -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -# CONFIG_CS5535_MFGPT is not set -CONFIG_HP_ILO=m -CONFIG_APDS9802ALS=m -CONFIG_ISL29003=m -CONFIG_ISL29020=m -CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1770=m -CONFIG_SENSORS_APDS990X=m -CONFIG_HMC6352=m -CONFIG_DS1682=m -CONFIG_VMWARE_BALLOON=m -CONFIG_PCH_PHUB=m -CONFIG_LATTICE_ECP3_CONFIG=m -CONFIG_SRAM=y -# CONFIG_PCI_ENDPOINT_TEST is not set -CONFIG_XILINX_SDFEC=m -CONFIG_MISC_RTSX=m -CONFIG_PVPANIC=m -CONFIG_C2PORT=m -CONFIG_C2PORT_DURAMAR_2150=m - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_MAX6875=m -CONFIG_EEPROM_93CX6=m -CONFIG_EEPROM_93XX46=m -CONFIG_EEPROM_IDT_89HPESX=m -CONFIG_EEPROM_EE1004=m -# end of EEPROM support - -CONFIG_CB710_CORE=m -# CONFIG_CB710_DEBUG is not set -CONFIG_CB710_DEBUG_ASSUMPTIONS=y - -# -# Texas Instruments shared transport line discipline -# -CONFIG_TI_ST=m -# end of Texas Instruments shared transport line discipline - -CONFIG_SENSORS_LIS3_I2C=m -CONFIG_ALTERA_STAPL=m -# CONFIG_INTEL_MEI is not set -# CONFIG_INTEL_MEI_ME is not set -# CONFIG_INTEL_MEI_TXE is not set -# CONFIG_INTEL_MEI_HDCP is not set -CONFIG_VMWARE_VMCI=m - -# -# Intel MIC & related support -# -CONFIG_VOP_BUS=m -CONFIG_VOP=m -# end of Intel MIC & related support - -CONFIG_ECHO=m -CONFIG_MISC_ALCOR_PCI=m -CONFIG_MISC_RTSX_PCI=m -CONFIG_MISC_RTSX_USB=m -CONFIG_HABANA_AI=m -CONFIG_UACCE=m -# end of Misc devices - -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -CONFIG_SCSI_NETLINK=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SRP_ATTRS=m -# end of SCSI Transports - -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_SCSI_CXGB4_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2X_FCOE=m -CONFIG_BE2ISCSI=m -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_HPSA=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_3W_SAS=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=5000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -CONFIG_AIC79XX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_SCSI_MVSAS=m -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVSAS_TASKLET is not set -CONFIG_SCSI_MVUMI=m -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_ARCMSR=m -CONFIG_SCSI_ESAS2R=m -CONFIG_MEGARAID_NEWGEN=y -CONFIG_MEGARAID_MM=m -CONFIG_MEGARAID_MAILBOX=m -CONFIG_MEGARAID_LEGACY=m -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -CONFIG_SCSI_MPT2SAS=m -CONFIG_SCSI_SMARTPQI=m -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PCI=m -# CONFIG_SCSI_UFS_DWC_TC_PCI is not set -CONFIG_SCSI_UFSHCD_PLATFORM=m -CONFIG_SCSI_UFS_CDNS_PLATFORM=m -# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set -# CONFIG_SCSI_UFS_BSG is not set -CONFIG_SCSI_HPTIOP=m -CONFIG_SCSI_BUSLOGIC=m -CONFIG_SCSI_FLASHPOINT=y -CONFIG_SCSI_MYRB=m -CONFIG_SCSI_MYRS=m -CONFIG_VMWARE_PVSCSI=m -CONFIG_XEN_SCSI_FRONTEND=m -CONFIG_HYPERV_STORAGE=m -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -CONFIG_FCOE=m -CONFIG_FCOE_FNIC=m -CONFIG_SCSI_SNIC=m -# CONFIG_SCSI_SNIC_DEBUG_FS is not set -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_FDOMAIN=m -CONFIG_SCSI_FDOMAIN_PCI=m -CONFIG_SCSI_FDOMAIN_ISA=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_ISCI=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_STEX=m -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -CONFIG_SCSI_IPR=m -CONFIG_SCSI_IPR_TRACE=y -CONFIG_SCSI_IPR_DUMP=y -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_QLA_FC=m -CONFIG_TCM_QLA2XXX=m -# CONFIG_TCM_QLA2XXX_DEBUG is not set -CONFIG_SCSI_QLA_ISCSI=m -CONFIG_QEDI=m -CONFIG_QEDF=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_DC395x=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_NSP32=m -CONFIG_SCSI_WD719X=m -CONFIG_SCSI_DEBUG=m -CONFIG_SCSI_PMCRAID=m -CONFIG_SCSI_PM8001=m -CONFIG_SCSI_BFA_FC=m -CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_CHELSIO_FCOE=m -CONFIG_SCSI_LOWLEVEL_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -# end of SCSI device support - -CONFIG_ATA=y -CONFIG_SATA_HOST=y -CONFIG_PATA_TIMINGS=y -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_ATA_FORCE=y -CONFIG_ATA_ACPI=y -CONFIG_SATA_ZPODD=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -CONFIG_SATA_AHCI=m -CONFIG_SATA_MOBILE_LPM_POLICY=0 -CONFIG_SATA_AHCI_PLATFORM=m -CONFIG_SATA_INIC162X=m -CONFIG_SATA_ACARD_AHCI=m -CONFIG_SATA_SIL24=m -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -CONFIG_PDC_ADMA=m -CONFIG_SATA_QSTOR=m -CONFIG_SATA_SX4=m -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=y -CONFIG_SATA_DWC=m -# CONFIG_SATA_DWC_OLD_DMA is not set -# CONFIG_SATA_DWC_DEBUG is not set -CONFIG_SATA_MV=m -CONFIG_SATA_NV=m -CONFIG_SATA_PROMISE=m -CONFIG_SATA_SIL=m -CONFIG_SATA_SIS=m -CONFIG_SATA_SVW=m -CONFIG_SATA_ULI=m -CONFIG_SATA_VIA=m -CONFIG_SATA_VITESSE=m - -# -# PATA SFF controllers with BMDMA -# -CONFIG_PATA_ALI=m -CONFIG_PATA_AMD=m -CONFIG_PATA_ARTOP=m -CONFIG_PATA_ATIIXP=m -CONFIG_PATA_ATP867X=m -CONFIG_PATA_CMD64X=m -CONFIG_PATA_CS5520=m -CONFIG_PATA_CS5530=m -CONFIG_PATA_CS5535=m -CONFIG_PATA_CS5536=m -CONFIG_PATA_CYPRESS=m -CONFIG_PATA_EFAR=m -CONFIG_PATA_HPT366=m -CONFIG_PATA_HPT37X=m -CONFIG_PATA_HPT3X2N=m -CONFIG_PATA_HPT3X3=m -# CONFIG_PATA_HPT3X3_DMA is not set -CONFIG_PATA_IT8213=m -CONFIG_PATA_IT821X=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_MARVELL=m -CONFIG_PATA_NETCELL=m -CONFIG_PATA_NINJA32=m -CONFIG_PATA_NS87415=m -CONFIG_PATA_OLDPIIX=m -CONFIG_PATA_OPTIDMA=m -CONFIG_PATA_PDC2027X=m -CONFIG_PATA_PDC_OLD=m -CONFIG_PATA_RADISYS=m -CONFIG_PATA_RDC=m -CONFIG_PATA_SC1200=m -CONFIG_PATA_SCH=m -CONFIG_PATA_SERVERWORKS=m -CONFIG_PATA_SIL680=m -CONFIG_PATA_SIS=y -CONFIG_PATA_TOSHIBA=m -CONFIG_PATA_TRIFLEX=m -CONFIG_PATA_VIA=m -CONFIG_PATA_WINBOND=m - -# -# PIO-only SFF controllers -# -CONFIG_PATA_CMD640_PCI=m -CONFIG_PATA_ISAPNP=m -CONFIG_PATA_MPIIX=m -CONFIG_PATA_NS87410=m -CONFIG_PATA_OPTI=m -CONFIG_PATA_PCMCIA=m -CONFIG_PATA_PLATFORM=m -CONFIG_PATA_QDI=m -CONFIG_PATA_RZ1000=m -CONFIG_PATA_WINBOND_VLB=m - -# -# Generic fallback / legacy drivers -# -CONFIG_PATA_ACPI=m -CONFIG_ATA_GENERIC=y -CONFIG_PATA_LEGACY=m -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_AUTODETECT=y -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_MD_CLUSTER=m -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -CONFIG_DM_UNSTRIPED=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -CONFIG_DM_WRITECACHE=m -CONFIG_DM_ERA=m -CONFIG_DM_CLONE=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_DUST=m -# CONFIG_DM_INIT is not set -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -CONFIG_DM_INTEGRITY=m -CONFIG_DM_ZONED=m -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_TCM_USER2=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_TCM_FC=m -CONFIG_ISCSI_TARGET=m -CONFIG_ISCSI_TARGET_CXGB4=m -CONFIG_SBP_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_FUSION_LOGGING=y - -# -# IEEE 1394 (FireWire) support -# -CONFIG_FIREWIRE=m -CONFIG_FIREWIRE_OHCI=m -CONFIG_FIREWIRE_SBP2=m -CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_NOSY=m -# end of IEEE 1394 (FireWire) support - -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_MAC_EMUMOUSEBTN=m -CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_WIREGUARD=m -# CONFIG_WIREGUARD_DEBUG is not set -CONFIG_EQUALIZER=m -CONFIG_NET_FC=y -CONFIG_IFB=m -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN_L3S=y -CONFIG_IPVLAN=m -CONFIG_IPVTAP=m -CONFIG_VXLAN=m -CONFIG_GENEVE=m -CONFIG_BAREUDP=m -CONFIG_GTP=m -CONFIG_MACSEC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_NTB_NETDEV=m -CONFIG_RIONET=m -CONFIG_RIONET_TX_SIZE=128 -CONFIG_RIONET_RX_SIZE=128 -CONFIG_TUN=y -CONFIG_TAP=m -# CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m -CONFIG_VIRTIO_NET=y -CONFIG_NLMON=m -CONFIG_NET_VRF=m -CONFIG_VSOCKMON=m -CONFIG_SUNGEM_PHY=m -CONFIG_ARCNET=m -CONFIG_ARCNET_1201=m -CONFIG_ARCNET_1051=m -CONFIG_ARCNET_RAW=m -CONFIG_ARCNET_CAP=m -CONFIG_ARCNET_COM90xx=m -CONFIG_ARCNET_COM90xxIO=m -CONFIG_ARCNET_RIM_I=m -CONFIG_ARCNET_COM20020=m -CONFIG_ARCNET_COM20020_ISA=m -CONFIG_ARCNET_COM20020_PCI=m -CONFIG_ARCNET_COM20020_CS=m -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -CONFIG_ATM_TCP=m -CONFIG_ATM_LANAI=m -CONFIG_ATM_ENI=m -# CONFIG_ATM_ENI_DEBUG is not set -# CONFIG_ATM_ENI_TUNE_BURST is not set -CONFIG_ATM_FIRESTREAM=m -CONFIG_ATM_ZATM=m -# CONFIG_ATM_ZATM_DEBUG is not set -CONFIG_ATM_NICSTAR=m -# CONFIG_ATM_NICSTAR_USE_SUNI is not set -# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set -CONFIG_ATM_IDT77252=m -# CONFIG_ATM_IDT77252_DEBUG is not set -# CONFIG_ATM_IDT77252_RCV_ALL is not set -CONFIG_ATM_IDT77252_USE_SUNI=y -CONFIG_ATM_AMBASSADOR=m -# CONFIG_ATM_AMBASSADOR_DEBUG is not set -CONFIG_ATM_HORIZON=m -# CONFIG_ATM_HORIZON_DEBUG is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -# CONFIG_ATM_FORE200E_USE_TASKLET is not set -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -CONFIG_ATM_HE=m -CONFIG_ATM_HE_USE_SUNI=y -CONFIG_ATM_SOLOS=m -CONFIG_CAIF_DRIVERS=y -CONFIG_CAIF_TTY=m -CONFIG_CAIF_SPI_SLAVE=m -# CONFIG_CAIF_SPI_SYNC is not set -CONFIG_CAIF_HSI=m -CONFIG_CAIF_VIRTIO=m - -# -# Distributed Switch Architecture drivers -# -CONFIG_B53=m -CONFIG_B53_SPI_DRIVER=m -CONFIG_B53_MDIO_DRIVER=m -CONFIG_B53_MMAP_DRIVER=m -CONFIG_B53_SRAB_DRIVER=m -CONFIG_B53_SERDES=m -CONFIG_NET_DSA_BCM_SF2=m -# CONFIG_NET_DSA_LOOP is not set -CONFIG_NET_DSA_LANTIQ_GSWIP=m -CONFIG_NET_DSA_MT7530=m -CONFIG_NET_DSA_MV88E6060=m -CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m -CONFIG_NET_DSA_MICROCHIP_KSZ9477=m -CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=m -CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m -CONFIG_NET_DSA_MICROCHIP_KSZ8795=m -CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI=m -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -# CONFIG_NET_DSA_MV88E6XXX_PTP is not set -CONFIG_NET_DSA_AR9331=m -CONFIG_NET_DSA_SJA1105=m -CONFIG_NET_DSA_SJA1105_PTP=y -# CONFIG_NET_DSA_SJA1105_TAS is not set -CONFIG_NET_DSA_QCA8K=m -CONFIG_NET_DSA_REALTEK_SMI=m -CONFIG_NET_DSA_SMSC_LAN9303=m -CONFIG_NET_DSA_SMSC_LAN9303_I2C=m -CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m -CONFIG_NET_DSA_VITESSE_VSC73XX=m -CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m -CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m -# end of Distributed Switch Architecture drivers - -CONFIG_ETHERNET=y -CONFIG_MDIO=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL3=m -CONFIG_3C515=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_3C589=m -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_NET_VENDOR_AGERE=y -CONFIG_ET131X=m -CONFIG_NET_VENDOR_ALACRITECH=y -CONFIG_SLICOSS=m -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_ALTERA_TSE=m -CONFIG_NET_VENDOR_AMAZON=y -CONFIG_ENA_ETHERNET=m -CONFIG_NET_VENDOR_AMD=y -CONFIG_AMD8111_ETH=m -CONFIG_LANCE=m -CONFIG_PCNET32=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_NI65=m -CONFIG_AMD_XGBE=m -# CONFIG_AMD_XGBE_DCB is not set -CONFIG_AMD_XGBE_HAVE_ECC=y -CONFIG_NET_VENDOR_AQUANTIA=y -CONFIG_NET_VENDOR_ARC=y -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_ATL2=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_ALX=m -CONFIG_NET_VENDOR_AURORA=y -CONFIG_AURORA_NB8800=m -CONFIG_NET_VENDOR_BROADCOM=y -CONFIG_B44=m -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y -CONFIG_BCMGENET=m -CONFIG_BNX2=m -CONFIG_CNIC=m -CONFIG_TIGON3=m -CONFIG_TIGON3_HWMON=y -CONFIG_BNX2X=m -CONFIG_BNX2X_SRIOV=y -# CONFIG_SYSTEMPORT is not set -CONFIG_BNXT=m -CONFIG_BNXT_SRIOV=y -CONFIG_BNXT_FLOWER_OFFLOAD=y -# CONFIG_BNXT_DCB is not set -CONFIG_BNXT_HWMON=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_BNA=m -CONFIG_NET_VENDOR_CADENCE=y -CONFIG_MACB=m -CONFIG_MACB_USE_HWSTAMP=y -CONFIG_MACB_PCI=m -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m -CONFIG_CHELSIO_T4_DCB=y -CONFIG_CHELSIO_T4_FCOE=y -CONFIG_CHELSIO_T4VF=m -CONFIG_CHELSIO_LIB=m -CONFIG_NET_VENDOR_CIRRUS=y -CONFIG_CS89x0=m -CONFIG_CS89x0_PLATFORM=y -CONFIG_NET_VENDOR_CISCO=y -CONFIG_ENIC=m -# CONFIG_NET_VENDOR_CORTINA is not set -CONFIG_CX_ECAT=m -CONFIG_DNET=m -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_DE2104X_DSL=0 -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_NET_VENDOR_DLINK=y -CONFIG_DL2K=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_BE2NET=m -CONFIG_BE2NET_HWMON=y -CONFIG_BE2NET_BE2=y -CONFIG_BE2NET_BE3=y -CONFIG_BE2NET_LANCER=y -CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_EZCHIP=y -CONFIG_NET_VENDOR_FUJITSU=y -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_NET_VENDOR_GOOGLE=y -CONFIG_GVE=m -CONFIG_NET_VENDOR_HUAWEI=y -CONFIG_HINIC=m -CONFIG_NET_VENDOR_I825XX=y -CONFIG_NET_VENDOR_INTEL=y -CONFIG_E100=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_E1000E_HWTS=y -CONFIG_IGB=m -CONFIG_IGB_HWMON=y -CONFIG_IGBVF=m -CONFIG_IXGB=m -CONFIG_IXGBE=m -CONFIG_IXGBE_HWMON=y -CONFIG_IXGBE_DCB=y -CONFIG_IXGBE_IPSEC=y -CONFIG_IXGBEVF=m -CONFIG_IXGBEVF_IPSEC=y -CONFIG_I40E=m -CONFIG_I40E_DCB=y -CONFIG_IAVF=m -CONFIG_I40EVF=m -CONFIG_ICE=m -CONFIG_FM10K=m -CONFIG_IGC=m -CONFIG_JME=m -CONFIG_NET_VENDOR_MARVELL=y -CONFIG_MVMDIO=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKGE_GENESIS=y -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_DCB=y -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX4_CORE_GEN2=y -CONFIG_MLX5_CORE=m -# CONFIG_MLX5_FPGA is not set -CONFIG_MLX5_CORE_EN=y -CONFIG_MLX5_EN_ARFS=y -CONFIG_MLX5_EN_RXNFC=y -CONFIG_MLX5_MPFS=y -CONFIG_MLX5_ESWITCH=y -CONFIG_MLX5_CORE_EN_DCB=y -# CONFIG_MLX5_CORE_IPOIB is not set -CONFIG_MLX5_SW_STEERING=y -CONFIG_MLXSW_CORE=m -CONFIG_MLXSW_CORE_HWMON=y -CONFIG_MLXSW_CORE_THERMAL=y -CONFIG_MLXSW_PCI=m -CONFIG_MLXSW_I2C=m -CONFIG_MLXSW_SWITCHIB=m -CONFIG_MLXSW_SWITCHX2=m -CONFIG_MLXSW_SPECTRUM=m -CONFIG_MLXSW_SPECTRUM_DCB=y -CONFIG_MLXSW_MINIMAL=m -CONFIG_MLXFW=m -CONFIG_NET_VENDOR_MICREL=y -CONFIG_KS8842=m -CONFIG_KS8851=m -CONFIG_KS8851_MLL=m -CONFIG_KSZ884X_PCI=m -CONFIG_NET_VENDOR_MICROCHIP=y -CONFIG_ENC28J60=m -# CONFIG_ENC28J60_WRITEVERIFY is not set -CONFIG_ENCX24J600=m -CONFIG_LAN743X=m -CONFIG_NET_VENDOR_MICROSEMI=y -CONFIG_MSCC_OCELOT_SWITCH=m -CONFIG_NET_VENDOR_MYRI=y -CONFIG_MYRI10GE=m -CONFIG_FEALNX=m -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NATSEMI=m -CONFIG_NS83820=m -CONFIG_NET_VENDOR_NETERION=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set -CONFIG_NET_VENDOR_NETRONOME=y -CONFIG_NFP=m -# CONFIG_NFP_APP_FLOWER is not set -CONFIG_NFP_APP_ABM_NIC=y -# CONFIG_NFP_DEBUG is not set -CONFIG_NET_VENDOR_NI=y -CONFIG_NI_XGE_MANAGEMENT_ENET=m -CONFIG_NET_VENDOR_8390=y -CONFIG_PCMCIA_AXNET=m -CONFIG_NE2000=m -CONFIG_NE2K_PCI=m -CONFIG_PCMCIA_PCNET=m -CONFIG_ULTRA=m -CONFIG_WD80x3=m -CONFIG_NET_VENDOR_NVIDIA=y -CONFIG_FORCEDETH=m -CONFIG_NET_VENDOR_OKI=y -CONFIG_PCH_GBE=m -CONFIG_ETHOC=m -CONFIG_NET_VENDOR_PACKET_ENGINES=y -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_NET_VENDOR_PENSANDO=y -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_QLA3XXX=m -CONFIG_QLCNIC=m -CONFIG_QLCNIC_SRIOV=y -CONFIG_QLCNIC_DCB=y -CONFIG_QLCNIC_HWMON=y -CONFIG_NETXEN_NIC=m -CONFIG_QED=m -CONFIG_QED_LL2=y -CONFIG_QED_SRIOV=y -CONFIG_QEDE=m -CONFIG_QED_ISCSI=y -CONFIG_QED_FCOE=y -CONFIG_QED_OOO=y -CONFIG_NET_VENDOR_QUALCOMM=y -CONFIG_QCOM_EMAC=m -CONFIG_RMNET=m -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_ATP=m -CONFIG_8139CP=m -CONFIG_8139TOO=m -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R8169=m -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_ROCKER=y -CONFIG_ROCKER=m -CONFIG_NET_VENDOR_SAMSUNG=y -CONFIG_SXGBE_ETH=m -CONFIG_NET_VENDOR_SEEQ=y -CONFIG_NET_VENDOR_SOLARFLARE=y -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_SFC_MCDI_MON=y -CONFIG_SFC_SRIOV=y -CONFIG_SFC_MCDI_LOGGING=y -CONFIG_SFC_FALCON=m -CONFIG_SFC_FALCON_MTD=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -CONFIG_SIS900=m -CONFIG_SIS190=m -CONFIG_NET_VENDOR_SMSC=y -CONFIG_SMC9194=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_EPIC100=m -CONFIG_SMSC911X=m -CONFIG_SMSC9420=m -# CONFIG_NET_VENDOR_SOCIONEXT is not set -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_STMMAC_ETH=m -# CONFIG_STMMAC_SELFTESTS is not set -CONFIG_STMMAC_PLATFORM=m -CONFIG_DWMAC_GENERIC=m -CONFIG_DWMAC_INTEL=m -# CONFIG_STMMAC_PCI is not set -CONFIG_NET_VENDOR_SUN=y -CONFIG_HAPPYMEAL=m -CONFIG_SUNGEM=m -CONFIG_CASSINI=m -CONFIG_NIU=m -CONFIG_NET_VENDOR_SYNOPSYS=y -CONFIG_DWC_XLGMAC=m -CONFIG_DWC_XLGMAC_PCI=m -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_TEHUTI=m -CONFIG_NET_VENDOR_TI=y -# CONFIG_TI_CPSW_PHY_SEL is not set -CONFIG_TLAN=m -CONFIG_NET_VENDOR_VIA=y -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -CONFIG_VIA_VELOCITY=m -CONFIG_NET_VENDOR_WIZNET=y -CONFIG_WIZNET_W5100=m -CONFIG_WIZNET_W5300=m -# CONFIG_WIZNET_BUS_DIRECT is not set -# CONFIG_WIZNET_BUS_INDIRECT is not set -CONFIG_WIZNET_BUS_ANY=y -# CONFIG_WIZNET_W5100_SPI is not set -CONFIG_NET_VENDOR_XILINX=y -CONFIG_XILINX_AXI_EMAC=m -CONFIG_XILINX_LL_TEMAC=m -CONFIG_NET_VENDOR_XIRCOM=y -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -# CONFIG_HIPPI is not set -CONFIG_NET_SB1000=m -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BCM_UNIMAC=m -CONFIG_MDIO_BITBANG=m -CONFIG_MDIO_GPIO=m -CONFIG_MDIO_I2C=m -CONFIG_MDIO_MSCC_MIIM=m -CONFIG_MDIO_MVUSB=m -CONFIG_MDIO_XPCS=m -CONFIG_PHYLINK=m -CONFIG_PHYLIB=y -CONFIG_SWPHY=y -# CONFIG_LED_TRIGGER_PHY is not set - -# -# MII PHY device drivers -# -CONFIG_SFP=m -CONFIG_ADIN_PHY=m -CONFIG_AMD_PHY=m -CONFIG_AQUANTIA_PHY=m -CONFIG_AX88796B_PHY=m -CONFIG_BCM7XXX_PHY=m -CONFIG_BCM87XX_PHY=m -CONFIG_BCM_NET_PHYLIB=m -CONFIG_BROADCOM_PHY=m -CONFIG_BCM84881_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_CORTINA_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_DP83822_PHY=m -CONFIG_DP83TC811_PHY=m -CONFIG_DP83848_PHY=m -CONFIG_DP83867_PHY=m -CONFIG_DP83869_PHY=m -CONFIG_FIXED_PHY=y -CONFIG_ICPLUS_PHY=m -CONFIG_INTEL_XWAY_PHY=m -CONFIG_LSI_ET1011C_PHY=m -CONFIG_LXT_PHY=m -CONFIG_MARVELL_PHY=m -CONFIG_MARVELL_10G_PHY=m -CONFIG_MICREL_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_MICROCHIP_T1_PHY=m -CONFIG_MICROSEMI_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_NXP_TJA11XX_PHY=m -CONFIG_AT803X_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_REALTEK_PHY=m -CONFIG_RENESAS_PHY=m -CONFIG_ROCKCHIP_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_STE10XP=m -CONFIG_TERANETICS_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_XILINX_GMII2RGMII=m -CONFIG_MICREL_KS8995MA=m -CONFIG_PLIP=m -CONFIG_PPP=y -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLHC=y -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_NET_DRIVERS=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET_ENABLE=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_CDC_PHONET=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m -CONFIG_USB_NET_AQC111=m -CONFIG_WLAN=y -# CONFIG_WIRELESS_WDS is not set -CONFIG_WLAN_VENDOR_ADMTEK=y -CONFIG_ADM8211=m -CONFIG_ATH_COMMON=m -CONFIG_WLAN_VENDOR_ATH=y -# CONFIG_ATH_DEBUG is not set -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -# CONFIG_ATH5K_TRACER is not set -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_COMMON_DEBUG=y -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -CONFIG_ATH9K_PCI=y -CONFIG_ATH9K_AHB=y -CONFIG_ATH9K_DEBUGFS=y -CONFIG_ATH9K_STATION_STATISTICS=y -# CONFIG_ATH9K_DYNACK is not set -CONFIG_ATH9K_WOW=y -CONFIG_ATH9K_RFKILL=y -CONFIG_ATH9K_CHANNEL_CONTEXT=y -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_PCI_NO_EEPROM=m -CONFIG_ATH9K_HTC=m -CONFIG_ATH9K_HTC_DEBUGFS=y -CONFIG_ATH9K_HWRNG=y -# CONFIG_ATH9K_COMMON_SPECTRAL is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -# CONFIG_CARL9170_DEBUGFS is not set -CONFIG_CARL9170_WPC=y -CONFIG_CARL9170_HWRNG=y -CONFIG_ATH6KL=m -CONFIG_ATH6KL_SDIO=m -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m -CONFIG_WIL6210=m -CONFIG_WIL6210_ISR_COR=y -CONFIG_WIL6210_TRACING=y -CONFIG_WIL6210_DEBUGFS=y -CONFIG_ATH10K=m -CONFIG_ATH10K_CE=y -CONFIG_ATH10K_PCI=m -CONFIG_ATH10K_SDIO=m -CONFIG_ATH10K_USB=m -# CONFIG_ATH10K_DEBUG is not set -CONFIG_ATH10K_DEBUGFS=y -# CONFIG_ATH10K_SPECTRAL is not set -CONFIG_ATH10K_TRACING=y -CONFIG_WCN36XX=m -# CONFIG_WCN36XX_DEBUGFS is not set -CONFIG_WLAN_VENDOR_ATMEL=y -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_AT76C50X_USB=m -CONFIG_WLAN_VENDOR_BROADCOM=y -CONFIG_B43=m -CONFIG_B43_BCMA=y -CONFIG_B43_SSB=y -CONFIG_B43_BUSES_BCMA_AND_SSB=y -# CONFIG_B43_BUSES_BCMA is not set -# CONFIG_B43_BUSES_SSB is not set -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -# CONFIG_B43_SDIO is not set -CONFIG_B43_BCMA_PIO=y -CONFIG_B43_PIO=y -CONFIG_B43_PHY_G=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_HT=y -CONFIG_B43_LEDS=y -CONFIG_B43_HWRNG=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_HWRNG=y -# CONFIG_B43LEGACY_DEBUG is not set -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_BRCMUTIL=m -CONFIG_BRCMSMAC=m -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -CONFIG_BRCMFMAC_PROTO_MSGBUF=y -CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_USB=y -CONFIG_BRCMFMAC_PCIE=y -CONFIG_BRCM_TRACING=y -# CONFIG_BRCMDBG is not set -CONFIG_WLAN_VENDOR_CISCO=y -CONFIG_AIRO=m -CONFIG_AIRO_CS=m -CONFIG_WLAN_VENDOR_INTEL=y -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2100_DEBUG is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m - -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -CONFIG_IWLEGACY_DEBUGFS=y -# end of iwl3945 / iwl4965 Debugging Options - -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -CONFIG_IWLDVM=m -CONFIG_IWLMVM=m -CONFIG_IWLWIFI_OPMODE_MODULAR=y -# CONFIG_IWLWIFI_BCAST_FILTERING is not set - -# -# Debugging Options -# -# CONFIG_IWLWIFI_DEBUG is not set -CONFIG_IWLWIFI_DEBUGFS=y -CONFIG_IWLWIFI_DEVICE_TRACING=y -# end of Debugging Options - -CONFIG_WLAN_VENDOR_INTERSIL=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m -CONFIG_HERMES=m -# CONFIG_HERMES_PRISM is not set -CONFIG_HERMES_CACHE_FW_ON_INIT=y -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -CONFIG_ORINOCO_USB=m -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -CONFIG_P54_SPI=m -# CONFIG_P54_SPI_DEFAULT_EEPROM is not set -CONFIG_P54_LEDS=y -# CONFIG_PRISM54 is not set -CONFIG_WLAN_VENDOR_MARVELL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_SPI=m -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_MWIFIEX_PCIE=m -CONFIG_MWIFIEX_USB=m -CONFIG_MWL8K=m -CONFIG_WLAN_VENDOR_MEDIATEK=y -CONFIG_MT7601U=m -# CONFIG_MT76x0U is not set -# CONFIG_MT76x0E is not set -# CONFIG_MT76x2E is not set -# CONFIG_MT76x2U is not set -# CONFIG_MT7603E is not set -# CONFIG_MT7615E is not set -CONFIG_WLAN_VENDOR_RALINK=y -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y -CONFIG_RT2800PCI_RT3290=y -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RT2800_LIB=m -CONFIG_RT2800_LIB_MMIO=m -CONFIG_RT2X00_LIB_MMIO=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_LIB_DEBUGFS is not set -# CONFIG_RT2X00_DEBUG is not set -CONFIG_WLAN_VENDOR_REALTEK=y -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m -CONFIG_RTL8723AE=m -CONFIG_RTL8723BE=m -CONFIG_RTL8188EE=m -CONFIG_RTL8192EE=m -CONFIG_RTL8821AE=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_PCI=m -CONFIG_RTLWIFI_USB=m -# CONFIG_RTLWIFI_DEBUG is not set -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8723_COMMON=m -CONFIG_RTLBTCOEXIST=m -CONFIG_RTL8XXXU=m -CONFIG_RTL8XXXU_UNTESTED=y -# CONFIG_RTW88 is not set -CONFIG_WLAN_VENDOR_RSI=y -CONFIG_RSI_91X=m -# CONFIG_RSI_DEBUGFS is not set -CONFIG_RSI_SDIO=m -CONFIG_RSI_USB=m -CONFIG_RSI_COEX=y -CONFIG_WLAN_VENDOR_ST=y -CONFIG_CW1200=m -CONFIG_CW1200_WLAN_SDIO=m -CONFIG_CW1200_WLAN_SPI=m -CONFIG_WLAN_VENDOR_TI=y -CONFIG_WL1251=m -CONFIG_WL1251_SPI=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SDIO=m -CONFIG_WILINK_PLATFORM_DATA=y -CONFIG_WLAN_VENDOR_ZYDAS=y -CONFIG_USB_ZD1201=m -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_WLAN_VENDOR_QUANTENNA=y -CONFIG_QTNFMAC=m -CONFIG_QTNFMAC_PCIE=m -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_WL3501=m -CONFIG_MAC80211_HWSIM=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_VIRT_WIFI=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 -# end of WiMAX Wireless Broadband devices - -CONFIG_WAN=y -CONFIG_HOSTESS_SV11=m -CONFIG_COSA=m -CONFIG_LANMEDIA=m -CONFIG_SEALEVEL_4021=m -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m -CONFIG_HDLC_X25=m -CONFIG_PCI200SYN=m -CONFIG_WANXL=m -CONFIG_PC300TOO=m -CONFIG_N2=m -CONFIG_C101=m -CONFIG_FARSYNC=m -CONFIG_DLCI=m -CONFIG_DLCI_MAX=8 -CONFIG_SDLA=m -CONFIG_LAPBETHER=m -CONFIG_X25_ASY=m -CONFIG_SBNI=m -# CONFIG_SBNI_MULTILINE is not set -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKELB=m -CONFIG_IEEE802154_AT86RF230=m -CONFIG_IEEE802154_AT86RF230_DEBUGFS=y -CONFIG_IEEE802154_MRF24J40=m -CONFIG_IEEE802154_CC2520=m -CONFIG_IEEE802154_ATUSB=m -CONFIG_IEEE802154_ADF7242=m -CONFIG_IEEE802154_CA8210=m -# CONFIG_IEEE802154_CA8210_DEBUGFS is not set -CONFIG_IEEE802154_MCR20A=m -# CONFIG_IEEE802154_HWSIM is not set -CONFIG_XEN_NETDEV_FRONTEND=y -CONFIG_XEN_NETDEV_BACKEND=m -CONFIG_VMXNET3=m -CONFIG_FUJITSU_ES=m -CONFIG_USB4_NET=m -CONFIG_HYPERV_NET=m -CONFIG_NETDEVSIM=m -CONFIG_NET_FAILOVER=y -CONFIG_ISDN=y -CONFIG_ISDN_CAPI=y -CONFIG_CAPI_TRACE=y -CONFIG_ISDN_CAPI_MIDDLEWARE=y -CONFIG_MISDN=m -CONFIG_MISDN_DSP=m -CONFIG_MISDN_L1OIP=m - -# -# mISDN hardware drivers -# -CONFIG_MISDN_HFCPCI=m -CONFIG_MISDN_HFCMULTI=m -CONFIG_MISDN_HFCUSB=m -CONFIG_MISDN_AVMFRITZ=m -CONFIG_MISDN_SPEEDFAX=m -CONFIG_MISDN_INFINEON=m -CONFIG_MISDN_W6692=m -CONFIG_MISDN_NETJET=m -CONFIG_MISDN_HDLC=m -CONFIG_MISDN_IPAC=m -CONFIG_MISDN_ISAR=m -CONFIG_NVM=y -CONFIG_NVM_PBLK=m -# CONFIG_NVM_PBLK_DEBUG is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=m -CONFIG_INPUT_FF_MEMLESS=m -CONFIG_INPUT_POLLDEV=m -CONFIG_INPUT_SPARSEKMAP=m -CONFIG_INPUT_MATRIXKMAP=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ADC=m -CONFIG_KEYBOARD_ADP5520=m -CONFIG_KEYBOARD_ADP5588=m -CONFIG_KEYBOARD_ADP5589=m -CONFIG_KEYBOARD_APPLESPI=m -CONFIG_KEYBOARD_ATKBD=y -CONFIG_KEYBOARD_QT1050=m -CONFIG_KEYBOARD_QT1070=m -CONFIG_KEYBOARD_QT2160=m -CONFIG_KEYBOARD_DLINK_DIR685=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_GPIO_POLLED=m -CONFIG_KEYBOARD_TCA6416=m -CONFIG_KEYBOARD_TCA8418=m -CONFIG_KEYBOARD_MATRIX=m -CONFIG_KEYBOARD_LM8323=m -CONFIG_KEYBOARD_LM8333=m -CONFIG_KEYBOARD_MAX7359=m -CONFIG_KEYBOARD_MCS=m -CONFIG_KEYBOARD_MPR121=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_OPENCORES=m -CONFIG_KEYBOARD_SAMSUNG=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_IQS62X=m -CONFIG_KEYBOARD_TM2_TOUCHKEY=m -CONFIG_KEYBOARD_TWL4030=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_KEYBOARD_CROS_EC=m -CONFIG_KEYBOARD_MTK_PMIC=m -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_BYD=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y -CONFIG_MOUSE_PS2_SENTELIC=y -CONFIG_MOUSE_PS2_TOUCHKIT=y -CONFIG_MOUSE_PS2_FOCALTECH=y -CONFIG_MOUSE_PS2_VMMOUSE=y -CONFIG_MOUSE_PS2_SMBUS=y -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_BCM5974=m -CONFIG_MOUSE_CYAPA=m -CONFIG_MOUSE_ELAN_I2C=m -CONFIG_MOUSE_ELAN_I2C_I2C=y -CONFIG_MOUSE_ELAN_I2C_SMBUS=y -# CONFIG_MOUSE_INPORT is not set -CONFIG_MOUSE_LOGIBM=m -CONFIG_MOUSE_PC110PAD=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=m -CONFIG_JOYSTICK_IFORCE_232=m -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_TWIDJOY=m -CONFIG_JOYSTICK_ZHENHUA=m -CONFIG_JOYSTICK_DB9=m -CONFIG_JOYSTICK_GAMECON=m -CONFIG_JOYSTICK_TURBOGRAFX=m -CONFIG_JOYSTICK_AS5011=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_JOYSTICK_XPAD=m -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -CONFIG_JOYSTICK_WALKERA0701=m -CONFIG_JOYSTICK_PSXPAD_SPI=m -# CONFIG_JOYSTICK_PSXPAD_SPI_FF is not set -CONFIG_JOYSTICK_PXRC=m -CONFIG_JOYSTICK_FSIA6B=m -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_USB_PEGASUS=m -CONFIG_TABLET_SERIAL_WACOM4=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_88PM860X=m -CONFIG_TOUCHSCREEN_ADS7846=m -CONFIG_TOUCHSCREEN_AD7877=m -CONFIG_TOUCHSCREEN_AD7879=m -CONFIG_TOUCHSCREEN_AD7879_I2C=m -CONFIG_TOUCHSCREEN_AD7879_SPI=m -CONFIG_TOUCHSCREEN_ADC=m -CONFIG_TOUCHSCREEN_ATMEL_MXT=m -# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set -CONFIG_TOUCHSCREEN_AUO_PIXCIR=m -CONFIG_TOUCHSCREEN_BU21013=m -CONFIG_TOUCHSCREEN_BU21029=m -CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m -CONFIG_TOUCHSCREEN_CY8CTMG110=m -CONFIG_TOUCHSCREEN_CYTTSP_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP_SPI=m -CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m -CONFIG_TOUCHSCREEN_DA9034=m -CONFIG_TOUCHSCREEN_DA9052=m -CONFIG_TOUCHSCREEN_DYNAPRO=m -CONFIG_TOUCHSCREEN_HAMPSHIRE=m -CONFIG_TOUCHSCREEN_EETI=m -CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m -CONFIG_TOUCHSCREEN_EXC3000=m -CONFIG_TOUCHSCREEN_FUJITSU=m -CONFIG_TOUCHSCREEN_GOODIX=m -CONFIG_TOUCHSCREEN_HIDEEP=m -CONFIG_TOUCHSCREEN_ILI210X=m -CONFIG_TOUCHSCREEN_S6SY761=m -CONFIG_TOUCHSCREEN_GUNZE=m -CONFIG_TOUCHSCREEN_EKTF2127=m -CONFIG_TOUCHSCREEN_ELAN=m -CONFIG_TOUCHSCREEN_ELO=m -CONFIG_TOUCHSCREEN_WACOM_W8001=m -CONFIG_TOUCHSCREEN_WACOM_I2C=m -CONFIG_TOUCHSCREEN_MAX11801=m -CONFIG_TOUCHSCREEN_MCS5000=m -CONFIG_TOUCHSCREEN_MMS114=m -CONFIG_TOUCHSCREEN_MELFAS_MIP4=m -CONFIG_TOUCHSCREEN_MTOUCH=m -CONFIG_TOUCHSCREEN_INEXIO=m -CONFIG_TOUCHSCREEN_MK712=m -CONFIG_TOUCHSCREEN_HTCPEN=m -CONFIG_TOUCHSCREEN_PENMOUNT=m -CONFIG_TOUCHSCREEN_EDT_FT5X06=m -CONFIG_TOUCHSCREEN_TOUCHRIGHT=m -CONFIG_TOUCHSCREEN_TOUCHWIN=m -CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m -CONFIG_TOUCHSCREEN_UCB1400=m -CONFIG_TOUCHSCREEN_PIXCIR=m -CONFIG_TOUCHSCREEN_WDT87XX_I2C=m -CONFIG_TOUCHSCREEN_WM831X=m -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_TOUCHSCREEN_MC13783=m -CONFIG_TOUCHSCREEN_USB_EGALAX=y -CONFIG_TOUCHSCREEN_USB_PANJIT=y -CONFIG_TOUCHSCREEN_USB_3M=y -CONFIG_TOUCHSCREEN_USB_ITM=y -CONFIG_TOUCHSCREEN_USB_ETURBO=y -CONFIG_TOUCHSCREEN_USB_GUNZE=y -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y -CONFIG_TOUCHSCREEN_USB_GOTOP=y -CONFIG_TOUCHSCREEN_USB_JASTEC=y -CONFIG_TOUCHSCREEN_USB_ELO=y -CONFIG_TOUCHSCREEN_USB_E2I=y -CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y -CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y -CONFIG_TOUCHSCREEN_USB_NEXIO=y -CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y -CONFIG_TOUCHSCREEN_TOUCHIT213=m -CONFIG_TOUCHSCREEN_TSC_SERIO=m -CONFIG_TOUCHSCREEN_TSC200X_CORE=m -CONFIG_TOUCHSCREEN_TSC2004=m -CONFIG_TOUCHSCREEN_TSC2005=m -CONFIG_TOUCHSCREEN_TSC2007=m -# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set -CONFIG_TOUCHSCREEN_PCAP=m -CONFIG_TOUCHSCREEN_RM_TS=m -CONFIG_TOUCHSCREEN_SILEAD=m -CONFIG_TOUCHSCREEN_SIS_I2C=m -CONFIG_TOUCHSCREEN_ST1232=m -CONFIG_TOUCHSCREEN_STMFTS=m -CONFIG_TOUCHSCREEN_SUR40=m -CONFIG_TOUCHSCREEN_SURFACE3_SPI=m -CONFIG_TOUCHSCREEN_SX8654=m -CONFIG_TOUCHSCREEN_TPS6507X=m -CONFIG_TOUCHSCREEN_ZET6223=m -CONFIG_TOUCHSCREEN_ZFORCE=m -CONFIG_TOUCHSCREEN_ROHM_BU21023=m -CONFIG_TOUCHSCREEN_IQS5XX=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_88PM860X_ONKEY=m -CONFIG_INPUT_88PM80X_ONKEY=m -CONFIG_INPUT_AD714X=m -CONFIG_INPUT_AD714X_I2C=m -CONFIG_INPUT_AD714X_SPI=m -CONFIG_INPUT_ARIZONA_HAPTICS=m -CONFIG_INPUT_BMA150=m -CONFIG_INPUT_E3X0_BUTTON=m -CONFIG_INPUT_MSM_VIBRATOR=m -CONFIG_INPUT_PCSPKR=m -CONFIG_INPUT_MAX77693_HAPTIC=m -CONFIG_INPUT_MAX8925_ONKEY=m -CONFIG_INPUT_MAX8997_HAPTIC=m -CONFIG_INPUT_MC13783_PWRBUTTON=m -CONFIG_INPUT_MMA8450=m -CONFIG_INPUT_APANEL=m -CONFIG_INPUT_GP2A=m -CONFIG_INPUT_GPIO_BEEPER=m -CONFIG_INPUT_GPIO_DECODER=m -CONFIG_INPUT_GPIO_VIBRA=m -CONFIG_INPUT_WISTRON_BTNS=m -CONFIG_INPUT_ATLAS_BTNS=m -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -CONFIG_INPUT_KXTJ9=m -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -CONFIG_INPUT_REGULATOR_HAPTIC=m -CONFIG_INPUT_RETU_PWRBUTTON=m -CONFIG_INPUT_AXP20X_PEK=m -CONFIG_INPUT_TWL4030_PWRBUTTON=m -CONFIG_INPUT_TWL4030_VIBRA=m -CONFIG_INPUT_TWL6040_VIBRA=m -CONFIG_INPUT_UINPUT=y -CONFIG_INPUT_PALMAS_PWRBUTTON=m -CONFIG_INPUT_PCF50633_PMU=m -CONFIG_INPUT_PCF8574=m -CONFIG_INPUT_PWM_BEEPER=m -CONFIG_INPUT_PWM_VIBRA=m -CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -CONFIG_INPUT_DA9052_ONKEY=m -CONFIG_INPUT_DA9055_ONKEY=m -CONFIG_INPUT_DA9063_ONKEY=m -CONFIG_INPUT_WM831X_ON=m -CONFIG_INPUT_PCAP=m -CONFIG_INPUT_ADXL34X=m -CONFIG_INPUT_ADXL34X_I2C=m -CONFIG_INPUT_ADXL34X_SPI=m -CONFIG_INPUT_IMS_PCU=m -CONFIG_INPUT_CMA3000=m -CONFIG_INPUT_CMA3000_I2C=m -CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m -CONFIG_INPUT_IDEAPAD_SLIDEBAR=m -CONFIG_INPUT_SOC_BUTTON_ARRAY=m -CONFIG_INPUT_DRV260X_HAPTICS=m -CONFIG_INPUT_DRV2665_HAPTICS=m -CONFIG_INPUT_DRV2667_HAPTICS=m -CONFIG_INPUT_RAVE_SP_PWRBUTTON=m -CONFIG_RMI4_CORE=m -CONFIG_RMI4_I2C=m -CONFIG_RMI4_SPI=m -CONFIG_RMI4_SMB=m -CONFIG_RMI4_F03=y -CONFIG_RMI4_F03_SERIO=m -CONFIG_RMI4_2D_SENSOR=y -CONFIG_RMI4_F11=y -CONFIG_RMI4_F12=y -CONFIG_RMI4_F30=y -# CONFIG_RMI4_F34 is not set -# CONFIG_RMI4_F54 is not set -CONFIG_RMI4_F55=y - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_CT82C710=m -CONFIG_SERIO_PARKBD=m -CONFIG_SERIO_PCIPS2=m -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=m -CONFIG_SERIO_ALTERA_PS2=m -CONFIG_SERIO_PS2MULT=m -CONFIG_SERIO_ARC_PS2=m -CONFIG_HYPERV_KEYBOARD=m -CONFIG_SERIO_GPIO_PS2=m -CONFIG_USERIO=m -CONFIG_GAMEPORT=m -CONFIG_GAMEPORT_NS558=m -CONFIG_GAMEPORT_L4=m -CONFIG_GAMEPORT_EMU10K1=m -CONFIG_GAMEPORT_FM801=m -# end of Hardware I/O ports -# end of Input device support - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=0 -CONFIG_LDISC_AUTOLOAD=y - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_PNP=y -# CONFIG_SERIAL_8250_16550A_VARIANTS is not set -# CONFIG_SERIAL_8250_FINTEK is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_EXAR=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_MEN_MCB=m -CONFIG_SERIAL_8250_NR_UARTS=48 -CONFIG_SERIAL_8250_RUNTIME_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_FOURPORT=m -CONFIG_SERIAL_8250_ACCENT=m -CONFIG_SERIAL_8250_BOCA=m -CONFIG_SERIAL_8250_EXAR_ST16C554=m -CONFIG_SERIAL_8250_HUB6=m -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_8250_DWLIB=y -CONFIG_SERIAL_8250_DW=m -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_8250_LPSS=m -CONFIG_SERIAL_8250_MID=m - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_KGDB_NMI=y -CONFIG_SERIAL_MAX3100=m -CONFIG_SERIAL_MAX310X=y -CONFIG_SERIAL_UARTLITE=m -CONFIG_SERIAL_UARTLITE_NR_UARTS=1 -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_CONSOLE_POLL=y -CONFIG_SERIAL_JSM=m -CONFIG_SERIAL_SCCNXP=y -CONFIG_SERIAL_SCCNXP_CONSOLE=y -CONFIG_SERIAL_SC16IS7XX_CORE=m -CONFIG_SERIAL_SC16IS7XX=m -CONFIG_SERIAL_SC16IS7XX_I2C=y -CONFIG_SERIAL_SC16IS7XX_SPI=y -CONFIG_SERIAL_TIMBERDALE=m -CONFIG_SERIAL_ALTERA_JTAGUART=m -CONFIG_SERIAL_ALTERA_UART=m -CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 -CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 -# CONFIG_SERIAL_IFX6X60 is not set -CONFIG_SERIAL_PCH_UART=m -CONFIG_SERIAL_ARC=m -CONFIG_SERIAL_ARC_NR_PORTS=1 -CONFIG_SERIAL_RP2=m -CONFIG_SERIAL_RP2_NR_UARTS=32 -CONFIG_SERIAL_FSL_LPUART=m -CONFIG_SERIAL_FSL_LINFLEXUART=m -CONFIG_SERIAL_MEN_Z135=m -# CONFIG_SERIAL_SPRD is not set -# end of Serial drivers - -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -# CONFIG_CYZ_INTR is not set -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_SYNCLINK_GT=m -CONFIG_ISI=m -CONFIG_N_HDLC=m -CONFIG_N_GSM=m -CONFIG_NOZOMI=m -CONFIG_NULL_TTY=m -CONFIG_TRACE_ROUTER=m -CONFIG_TRACE_SINK=m -CONFIG_HVC_DRIVER=y -CONFIG_HVC_IRQ=y -CONFIG_HVC_XEN=y -CONFIG_HVC_XEN_FRONTEND=y -CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y -CONFIG_TTY_PRINTK=y -CONFIG_TTY_PRINTK_LEVEL=6 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -CONFIG_PPDEV=m -CONFIG_VIRTIO_CONSOLE=y -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DMI_DECODE=y -CONFIG_IPMI_PLAT_DATA=y -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_SSIF=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_IPMB_DEVICE_INTERFACE=m -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=m -CONFIG_HW_RANDOM_INTEL=m -CONFIG_HW_RANDOM_AMD=m -CONFIG_HW_RANDOM_GEODE=m -CONFIG_HW_RANDOM_VIA=m -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_DTLK=m -CONFIG_APPLICOM=m -CONFIG_SONYPI=m - -# -# PCMCIA character devices -# -CONFIG_SYNCLINK_CS=m -CONFIG_CARDMAN_4000=m -CONFIG_CARDMAN_4040=m -CONFIG_SCR24X=m -CONFIG_IPWIRELESS=m -# end of PCMCIA character devices - -CONFIG_MWAVE=m -CONFIG_SCx200_GPIO=m -CONFIG_PC8736x_GPIO=m -CONFIG_NSC_GPIO=m -CONFIG_DEVMEM=y -# CONFIG_DEVKMEM is not set -CONFIG_NVRAM=m -CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 -CONFIG_DEVPORT=y -CONFIG_HPET=y -CONFIG_HPET_MMAP=y -CONFIG_HPET_MMAP_DEFAULT=y -CONFIG_HANGCHECK_TIMER=m -CONFIG_TCG_TPM=y -CONFIG_HW_RANDOM_TPM=y -CONFIG_TCG_TIS_CORE=y -CONFIG_TCG_TIS=y -CONFIG_TCG_TIS_SPI=m -# CONFIG_TCG_TIS_SPI_CR50 is not set -CONFIG_TCG_TIS_I2C_ATMEL=m -CONFIG_TCG_TIS_I2C_INFINEON=m -CONFIG_TCG_TIS_I2C_NUVOTON=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_TCG_INFINEON=m -CONFIG_TCG_XEN=m -CONFIG_TCG_CRB=y -CONFIG_TCG_VTPM_PROXY=m -CONFIG_TCG_TIS_ST33ZP24=m -CONFIG_TCG_TIS_ST33ZP24_I2C=m -CONFIG_TCG_TIS_ST33ZP24_SPI=m -CONFIG_TELCLOCK=m -CONFIG_XILLYBUS=m -CONFIG_XILLYBUS_PCIE=m -# end of Character devices - -# CONFIG_RANDOM_TRUST_CPU is not set -# CONFIG_RANDOM_TRUST_BOOTLOADER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_ACPI_I2C_OPREGION=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MUX=m - -# -# Multiplexer I2C Chip support -# -CONFIG_I2C_MUX_GPIO=m -CONFIG_I2C_MUX_LTC4306=m -CONFIG_I2C_MUX_PCA9541=m -CONFIG_I2C_MUX_PCA954x=m -CONFIG_I2C_MUX_REG=m -CONFIG_I2C_MUX_MLXCPLD=m -# end of Multiplexer I2C Chip support - -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_SMBUS=m -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI1563=m -CONFIG_I2C_ALI15X3=m -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD756_S4882=m -CONFIG_I2C_AMD8111=m -CONFIG_I2C_AMD_MP2=m -CONFIG_I2C_I801=m -CONFIG_I2C_ISCH=m -CONFIG_I2C_ISMT=m -CONFIG_I2C_PIIX4=m -CONFIG_I2C_CHT_WC=m -CONFIG_I2C_NFORCE2=m -CONFIG_I2C_NFORCE2_S4985=m -CONFIG_I2C_NVIDIA_GPU=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS96X=m -CONFIG_I2C_VIA=m -CONFIG_I2C_VIAPRO=m - -# -# ACPI drivers -# -CONFIG_I2C_SCMI=m - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_CBUS_GPIO=m -CONFIG_I2C_DESIGNWARE_CORE=y -CONFIG_I2C_DESIGNWARE_PLATFORM=y -# CONFIG_I2C_DESIGNWARE_SLAVE is not set -CONFIG_I2C_DESIGNWARE_PCI=m -CONFIG_I2C_DESIGNWARE_BAYTRAIL=y -CONFIG_I2C_EG20T=m -CONFIG_I2C_EMEV2=m -CONFIG_I2C_GPIO=m -# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set -CONFIG_I2C_KEMPLD=m -CONFIG_I2C_OCORES=m -CONFIG_I2C_PCA_PLATFORM=m -CONFIG_I2C_SIMTEC=m -CONFIG_I2C_XILINX=m - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_DIOLAN_U2C=m -CONFIG_I2C_DLN2=m -CONFIG_I2C_PARPORT=m -CONFIG_I2C_ROBOTFUZZ_OSIF=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m -CONFIG_I2C_VIPERBOARD=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_PCA_ISA=m -CONFIG_I2C_CROS_EC_TUNNEL=m -CONFIG_SCx200_ACB=m -# end of I2C Hardware Bus support - -CONFIG_I2C_STUB=m -CONFIG_I2C_SLAVE=y -CONFIG_I2C_SLAVE_EEPROM=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# end of I2C support - -CONFIG_I3C=m -CONFIG_CDNS_I3C_MASTER=m -CONFIG_DW_I3C_MASTER=m -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_ALTERA=m -CONFIG_SPI_AXI_SPI_ENGINE=m -CONFIG_SPI_BITBANG=m -CONFIG_SPI_BUTTERFLY=m -CONFIG_SPI_CADENCE=m -CONFIG_SPI_DESIGNWARE=m -CONFIG_SPI_DW_PCI=m -CONFIG_SPI_DW_MID_DMA=y -CONFIG_SPI_DW_MMIO=m -CONFIG_SPI_DLN2=m -CONFIG_SPI_NXP_FLEXSPI=m -CONFIG_SPI_GPIO=m -CONFIG_SPI_LM70_LLP=m -CONFIG_SPI_OC_TINY=m -CONFIG_SPI_PXA2XX=m -CONFIG_SPI_PXA2XX_PCI=m -CONFIG_SPI_ROCKCHIP=m -CONFIG_SPI_SC18IS602=m -CONFIG_SPI_SIFIVE=m -CONFIG_SPI_MXIC=m -CONFIG_SPI_TOPCLIFF_PCH=m -CONFIG_SPI_XCOMM=m -# CONFIG_SPI_XILINX is not set -CONFIG_SPI_ZYNQMP_GQSPI=m - -# -# SPI Multiplexer support -# -CONFIG_SPI_MUX=m - -# -# SPI Protocol Masters -# -CONFIG_SPI_SPIDEV=m -# CONFIG_SPI_LOOPBACK_TEST is not set -CONFIG_SPI_TLE62X0=m -# CONFIG_SPI_SLAVE is not set -CONFIG_SPMI=m -CONFIG_HSI=m -CONFIG_HSI_BOARDINFO=y - -# -# HSI controllers -# - -# -# HSI clients -# -CONFIG_HSI_CHAR=m -CONFIG_PPS=m -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -CONFIG_PPS_CLIENT_GPIO=m - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=m - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -CONFIG_PTP_1588_CLOCK_PCH=m -CONFIG_PTP_1588_CLOCK_KVM=m -CONFIG_PTP_1588_CLOCK_IDT82P33=m -CONFIG_PTP_1588_CLOCK_IDTCM=m -CONFIG_PTP_1588_CLOCK_VMW=m -# end of PTP clock support - -CONFIG_PINCTRL=y -CONFIG_PINMUX=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AMD=y -CONFIG_PINCTRL_DA9062=m -CONFIG_PINCTRL_MCP23S08=m -CONFIG_PINCTRL_SX150X=y -CONFIG_PINCTRL_BAYTRAIL=y -CONFIG_PINCTRL_CHERRYVIEW=m -CONFIG_PINCTRL_LYNXPOINT=m -CONFIG_PINCTRL_MERRIFIELD=m -CONFIG_PINCTRL_INTEL=m -CONFIG_PINCTRL_BROXTON=m -CONFIG_PINCTRL_CANNONLAKE=m -CONFIG_PINCTRL_CEDARFORK=m -CONFIG_PINCTRL_DENVERTON=m -CONFIG_PINCTRL_GEMINILAKE=m -CONFIG_PINCTRL_ICELAKE=m -CONFIG_PINCTRL_LEWISBURG=m -CONFIG_PINCTRL_SUNRISEPOINT=m -CONFIG_PINCTRL_TIGERLAKE=m -CONFIG_PINCTRL_MADERA=m -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_FASTPATH_LIMIT=512 -CONFIG_GPIO_ACPI=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=m -CONFIG_GPIO_MAX730X=m - -# -# Memory mapped GPIO drivers -# -CONFIG_GPIO_AMDPT=m -CONFIG_GPIO_DWAPB=m -CONFIG_GPIO_EXAR=m -CONFIG_GPIO_GENERIC_PLATFORM=m -CONFIG_GPIO_ICH=m -CONFIG_GPIO_MB86S7X=m -CONFIG_GPIO_MENZ127=m -CONFIG_GPIO_VX855=m -CONFIG_GPIO_XILINX=m -CONFIG_GPIO_AMD_FCH=m -# end of Memory mapped GPIO drivers - -# -# Port-mapped I/O GPIO drivers -# -CONFIG_GPIO_F7188X=m -CONFIG_GPIO_IT87=m -CONFIG_GPIO_SCH=m -CONFIG_GPIO_SCH311X=m -CONFIG_GPIO_WINBOND=m -CONFIG_GPIO_WS16C48=m -# end of Port-mapped I/O GPIO drivers - -# -# I2C GPIO expanders -# -CONFIG_GPIO_ADP5588=m -CONFIG_GPIO_MAX7300=m -CONFIG_GPIO_MAX732X=m -CONFIG_GPIO_PCA953X=m -CONFIG_GPIO_PCF857X=m -CONFIG_GPIO_TPIC2810=m -# end of I2C GPIO expanders - -# -# MFD GPIO expanders -# -CONFIG_GPIO_ADP5520=m -CONFIG_GPIO_ARIZONA=m -CONFIG_GPIO_BD9571MWV=m -CONFIG_GPIO_CRYSTAL_COVE=m -CONFIG_GPIO_CS5535=m -CONFIG_GPIO_DA9052=m -CONFIG_GPIO_DA9055=m -CONFIG_GPIO_DLN2=m -CONFIG_GPIO_JANZ_TTL=m -CONFIG_GPIO_KEMPLD=m -CONFIG_GPIO_LP3943=m -CONFIG_GPIO_LP873X=m -CONFIG_GPIO_MADERA=m -CONFIG_GPIO_MSIC=y -CONFIG_GPIO_PALMAS=y -CONFIG_GPIO_RC5T583=y -CONFIG_GPIO_TIMBERDALE=y -CONFIG_GPIO_TPS65086=m -CONFIG_GPIO_TPS6586X=y -CONFIG_GPIO_TPS65910=y -CONFIG_GPIO_TPS65912=m -CONFIG_GPIO_TQMX86=m -CONFIG_GPIO_TWL4030=m -CONFIG_GPIO_TWL6040=m -CONFIG_GPIO_UCB1400=m -CONFIG_GPIO_WHISKEY_COVE=m -CONFIG_GPIO_WM831X=m -CONFIG_GPIO_WM8350=m -CONFIG_GPIO_WM8994=m -# end of MFD GPIO expanders - -# -# PCI GPIO expanders -# -CONFIG_GPIO_AMD8111=m -CONFIG_GPIO_INTEL_MID=y -CONFIG_GPIO_MERRIFIELD=m -CONFIG_GPIO_ML_IOH=m -CONFIG_GPIO_PCH=m -CONFIG_GPIO_PCI_IDIO_16=m -CONFIG_GPIO_PCIE_IDIO_24=m -CONFIG_GPIO_RDC321X=m -# end of PCI GPIO expanders - -# -# SPI GPIO expanders -# -CONFIG_GPIO_MAX3191X=m -CONFIG_GPIO_MAX7301=m -CONFIG_GPIO_MC33880=m -CONFIG_GPIO_PISOSR=m -CONFIG_GPIO_XRA1403=m -# end of SPI GPIO expanders - -# -# USB GPIO expanders -# -CONFIG_GPIO_VIPERBOARD=m -# end of USB GPIO expanders - -# CONFIG_GPIO_MOCKUP is not set -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -CONFIG_W1_MASTER_MATROX=m -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_DS1WM=m -CONFIG_W1_MASTER_GPIO=m -CONFIG_W1_MASTER_SGI=m -# end of 1-wire Bus Masters - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -CONFIG_W1_SLAVE_DS2405=m -CONFIG_W1_SLAVE_DS2408=m -CONFIG_W1_SLAVE_DS2408_READBACK=y -CONFIG_W1_SLAVE_DS2413=m -CONFIG_W1_SLAVE_DS2406=m -CONFIG_W1_SLAVE_DS2423=m -CONFIG_W1_SLAVE_DS2805=m -CONFIG_W1_SLAVE_DS2430=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -# CONFIG_W1_SLAVE_DS2433_CRC is not set -CONFIG_W1_SLAVE_DS2438=m -CONFIG_W1_SLAVE_DS250X=m -CONFIG_W1_SLAVE_DS2780=m -CONFIG_W1_SLAVE_DS2781=m -CONFIG_W1_SLAVE_DS28E04=m -CONFIG_W1_SLAVE_DS28E17=m -# end of 1-wire Slaves - -CONFIG_POWER_AVS=y -CONFIG_QCOM_CPR=m -CONFIG_POWER_RESET=y -# CONFIG_POWER_RESET_MT6323 is not set -CONFIG_POWER_RESET_RESTART=y -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_POWER_SUPPLY_HWMON=y -CONFIG_PDA_POWER=m -CONFIG_GENERIC_ADC_BATTERY=m -CONFIG_MAX8925_POWER=m -CONFIG_WM831X_BACKUP=m -CONFIG_WM831X_POWER=m -CONFIG_WM8350_POWER=m -CONFIG_TEST_POWER=m -CONFIG_BATTERY_88PM860X=m -CONFIG_CHARGER_ADP5061=m -CONFIG_BATTERY_DS2760=m -CONFIG_BATTERY_DS2780=m -CONFIG_BATTERY_DS2781=m -CONFIG_BATTERY_DS2782=m -CONFIG_BATTERY_SBS=m -CONFIG_CHARGER_SBS=m -CONFIG_MANAGER_SBS=m -CONFIG_BATTERY_BQ27XXX=m -CONFIG_BATTERY_BQ27XXX_I2C=m -CONFIG_BATTERY_BQ27XXX_HDQ=m -# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set -CONFIG_BATTERY_DA9030=m -CONFIG_BATTERY_DA9052=m -CONFIG_CHARGER_DA9150=m -CONFIG_BATTERY_DA9150=m -CONFIG_CHARGER_AXP20X=m -CONFIG_BATTERY_AXP20X=m -CONFIG_AXP20X_POWER=m -CONFIG_AXP288_CHARGER=m -CONFIG_AXP288_FUEL_GAUGE=m -CONFIG_BATTERY_MAX17040=m -CONFIG_BATTERY_MAX17042=m -CONFIG_BATTERY_MAX1721X=m -CONFIG_BATTERY_TWL4030_MADC=m -CONFIG_CHARGER_88PM860X=m -CONFIG_CHARGER_PCF50633=m -CONFIG_BATTERY_RX51=m -CONFIG_CHARGER_ISP1704=m -CONFIG_CHARGER_MAX8903=m -CONFIG_CHARGER_TWL4030=m -CONFIG_CHARGER_LP8727=m -CONFIG_CHARGER_LP8788=m -CONFIG_CHARGER_GPIO=m -CONFIG_CHARGER_MANAGER=y -CONFIG_CHARGER_LT3651=m -CONFIG_CHARGER_MAX14577=m -CONFIG_CHARGER_MAX77693=m -CONFIG_CHARGER_MAX8997=m -CONFIG_CHARGER_MAX8998=m -CONFIG_CHARGER_BQ2415X=m -CONFIG_CHARGER_BQ24190=m -CONFIG_CHARGER_BQ24257=m -CONFIG_CHARGER_BQ24735=m -CONFIG_CHARGER_BQ25890=m -CONFIG_CHARGER_SMB347=m -CONFIG_CHARGER_TPS65090=m -CONFIG_BATTERY_GAUGE_LTC2941=m -CONFIG_BATTERY_RT5033=m -CONFIG_CHARGER_RT9455=m -CONFIG_CHARGER_CROS_USBPD=m -CONFIG_CHARGER_WILCO=m -CONFIG_HWMON=y -CONFIG_HWMON_VID=m -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -CONFIG_SENSORS_ABITUGURU=m -CONFIG_SENSORS_ABITUGURU3=m -CONFIG_SENSORS_AD7314=m -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM1177=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_ADT7X10=m -CONFIG_SENSORS_ADT7310=m -CONFIG_SENSORS_ADT7410=m -CONFIG_SENSORS_ADT7411=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7475=m -CONFIG_SENSORS_AS370=m -CONFIG_SENSORS_ASC7621=m -CONFIG_SENSORS_AXI_FAN_CONTROL=m -CONFIG_SENSORS_K8TEMP=m -CONFIG_SENSORS_K10TEMP=m -CONFIG_SENSORS_FAM15H_POWER=m -CONFIG_SENSORS_APPLESMC=m -CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_ASPEED=m -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DRIVETEMP=m -CONFIG_SENSORS_DS620=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_DELL_SMM=m -CONFIG_SENSORS_DA9052_ADC=m -CONFIG_SENSORS_DA9055=m -CONFIG_SENSORS_I5K_AMB=m -CONFIG_SENSORS_F71805F=m -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_MC13783_ADC=m -CONFIG_SENSORS_FSCHMD=m -CONFIG_SENSORS_FTSTEUTATES=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_G760A=m -CONFIG_SENSORS_G762=m -CONFIG_SENSORS_HIH6130=m -CONFIG_SENSORS_IBMAEM=m -CONFIG_SENSORS_IBMPEX=m -CONFIG_SENSORS_IIO_HWMON=m -CONFIG_SENSORS_I5500=m -CONFIG_SENSORS_CORETEMP=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_JC42=m -CONFIG_SENSORS_POWR1220=m -CONFIG_SENSORS_LINEAGE=m -CONFIG_SENSORS_LTC2945=m -CONFIG_SENSORS_LTC2947=m -CONFIG_SENSORS_LTC2947_I2C=m -CONFIG_SENSORS_LTC2947_SPI=m -CONFIG_SENSORS_LTC2990=m -CONFIG_SENSORS_LTC4151=m -CONFIG_SENSORS_LTC4215=m -CONFIG_SENSORS_LTC4222=m -CONFIG_SENSORS_LTC4245=m -CONFIG_SENSORS_LTC4260=m -CONFIG_SENSORS_LTC4261=m -CONFIG_SENSORS_MAX1111=m -CONFIG_SENSORS_MAX16065=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_MAX1668=m -CONFIG_SENSORS_MAX197=m -CONFIG_SENSORS_MAX31722=m -CONFIG_SENSORS_MAX31730=m -CONFIG_SENSORS_MAX6621=m -CONFIG_SENSORS_MAX6639=m -CONFIG_SENSORS_MAX6642=m -CONFIG_SENSORS_MAX6650=m -CONFIG_SENSORS_MAX6697=m -CONFIG_SENSORS_MAX31790=m -CONFIG_SENSORS_MCP3021=m -CONFIG_SENSORS_TC654=m -CONFIG_SENSORS_MENF21BMC_HWMON=m -CONFIG_SENSORS_ADCXX=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM70=m -CONFIG_SENSORS_LM73=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_LM93=m -CONFIG_SENSORS_LM95234=m -CONFIG_SENSORS_LM95241=m -CONFIG_SENSORS_LM95245=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_SENSORS_NCT6683=m -CONFIG_SENSORS_NCT6775=m -CONFIG_SENSORS_NCT7802=m -CONFIG_SENSORS_NCT7904=m -CONFIG_SENSORS_NPCM7XX=m -CONFIG_SENSORS_PCF8591=m -CONFIG_PMBUS=m -CONFIG_SENSORS_PMBUS=m -CONFIG_SENSORS_ADM1275=m -CONFIG_SENSORS_BEL_PFE=m -CONFIG_SENSORS_IBM_CFFPS=m -CONFIG_SENSORS_INSPUR_IPSPS=m -CONFIG_SENSORS_IR35221=m -CONFIG_SENSORS_IR38064=m -CONFIG_SENSORS_IRPS5401=m -CONFIG_SENSORS_ISL68137=m -CONFIG_SENSORS_LM25066=m -CONFIG_SENSORS_LTC2978=m -CONFIG_SENSORS_LTC2978_REGULATOR=y -CONFIG_SENSORS_LTC3815=m -CONFIG_SENSORS_MAX16064=m -CONFIG_SENSORS_MAX20730=m -CONFIG_SENSORS_MAX20751=m -CONFIG_SENSORS_MAX31785=m -CONFIG_SENSORS_MAX34440=m -CONFIG_SENSORS_MAX8688=m -CONFIG_SENSORS_PXE1610=m -CONFIG_SENSORS_TPS40422=m -CONFIG_SENSORS_TPS53679=m -CONFIG_SENSORS_UCD9000=m -CONFIG_SENSORS_UCD9200=m -CONFIG_SENSORS_XDPE122=m -CONFIG_SENSORS_ZL6100=m -CONFIG_SENSORS_SHT15=m -CONFIG_SENSORS_SHT21=m -CONFIG_SENSORS_SHT3x=m -CONFIG_SENSORS_SHTC1=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_EMC1403=m -CONFIG_SENSORS_EMC2103=m -CONFIG_SENSORS_EMC6W201=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_SMSC47M192=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_SCH56XX_COMMON=m -CONFIG_SENSORS_SCH5627=m -CONFIG_SENSORS_SCH5636=m -CONFIG_SENSORS_STTS751=m -CONFIG_SENSORS_SMM665=m -CONFIG_SENSORS_ADC128D818=m -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_ADS7871=m -CONFIG_SENSORS_AMC6821=m -CONFIG_SENSORS_INA209=m -CONFIG_SENSORS_INA2XX=m -CONFIG_SENSORS_INA3221=m -CONFIG_SENSORS_TC74=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_TMP102=m -CONFIG_SENSORS_TMP103=m -CONFIG_SENSORS_TMP108=m -CONFIG_SENSORS_TMP401=m -CONFIG_SENSORS_TMP421=m -CONFIG_SENSORS_TMP513=m -CONFIG_SENSORS_VIA_CPUTEMP=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83773G=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83795=m -# CONFIG_SENSORS_W83795_FANCTRL is not set -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83L786NG=m -CONFIG_SENSORS_W83627HF=m -CONFIG_SENSORS_W83627EHF=m -CONFIG_SENSORS_WM831X=m -CONFIG_SENSORS_WM8350=m -CONFIG_SENSORS_XGENE=m - -# -# ACPI drivers -# -CONFIG_SENSORS_ACPI_POWER=m -CONFIG_SENSORS_ATK0110=m -CONFIG_THERMAL=y -# CONFIG_THERMAL_STATISTICS is not set -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_WRITABLE_TRIPS=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_GOV_BANG_BANG=y -CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_CLOCK_THERMAL=y -CONFIG_DEVFREQ_THERMAL=y -CONFIG_THERMAL_EMULATION=y - -# -# Intel thermal drivers -# -CONFIG_INTEL_POWERCLAMP=m -CONFIG_X86_PKG_TEMP_THERMAL=m -CONFIG_INTEL_SOC_DTS_IOSF_CORE=m -CONFIG_INTEL_SOC_DTS_THERMAL=m - -# -# ACPI INT340X thermal drivers -# -CONFIG_INT340X_THERMAL=m -CONFIG_ACPI_THERMAL_REL=m -CONFIG_INT3406_THERMAL=m -# end of ACPI INT340X thermal drivers - -CONFIG_INTEL_BXT_PMIC_THERMAL=m -CONFIG_INTEL_PCH_THERMAL=m -# end of Intel thermal drivers - -CONFIG_GENERIC_ADC_THERMAL=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y -CONFIG_WATCHDOG_OPEN_TIMEOUT=0 -CONFIG_WATCHDOG_SYSFS=y - -# -# Watchdog Pretimeout Governors -# -# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -CONFIG_DA9052_WATCHDOG=m -CONFIG_DA9055_WATCHDOG=m -CONFIG_DA9063_WATCHDOG=m -CONFIG_DA9062_WATCHDOG=m -CONFIG_MENF21BMC_WATCHDOG=m -CONFIG_MENZ069_WATCHDOG=m -CONFIG_WDAT_WDT=m -CONFIG_WM831X_WATCHDOG=m -CONFIG_WM8350_WATCHDOG=m -CONFIG_XILINX_WATCHDOG=m -CONFIG_ZIIRAVE_WATCHDOG=m -CONFIG_RAVE_SP_WATCHDOG=m -CONFIG_CADENCE_WATCHDOG=m -CONFIG_DW_WATCHDOG=m -CONFIG_TWL4030_WATCHDOG=m -CONFIG_MAX63XX_WATCHDOG=m -CONFIG_RETU_WATCHDOG=m -CONFIG_ACQUIRE_WDT=m -CONFIG_ADVANTECH_WDT=m -CONFIG_ALIM1535_WDT=m -CONFIG_ALIM7101_WDT=m -CONFIG_EBC_C384_WDT=m -CONFIG_F71808E_WDT=m -CONFIG_SP5100_TCO=m -CONFIG_SBC_FITPC2_WATCHDOG=m -CONFIG_EUROTECH_WDT=m -CONFIG_IB700_WDT=m -CONFIG_IBMASR=m -CONFIG_WAFER_WDT=m -CONFIG_I6300ESB_WDT=m -CONFIG_IE6XX_WDT=m -CONFIG_INTEL_SCU_WATCHDOG=y -CONFIG_INTEL_MID_WATCHDOG=m -CONFIG_ITCO_WDT=m -CONFIG_ITCO_VENDOR_SUPPORT=y -CONFIG_IT8712F_WDT=m -CONFIG_IT87_WDT=m -CONFIG_HP_WATCHDOG=m -CONFIG_HPWDT_NMI_DECODING=y -CONFIG_KEMPLD_WDT=m -CONFIG_SC1200_WDT=m -CONFIG_SCx200_WDT=m -CONFIG_PC87413_WDT=m -CONFIG_NV_TCO=m -CONFIG_60XX_WDT=m -CONFIG_SBC8360_WDT=m -CONFIG_SBC7240_WDT=m -CONFIG_CPU5_WDT=m -CONFIG_SMSC_SCH311X_WDT=m -CONFIG_SMSC37B787_WDT=m -CONFIG_TQMX86_WDT=m -CONFIG_VIA_WDT=m -CONFIG_W83627HF_WDT=m -CONFIG_W83877F_WDT=m -CONFIG_W83977F_WDT=m -CONFIG_MACHZ_WDT=m -CONFIG_SBC_EPX_C3_WATCHDOG=m -CONFIG_NI903X_WDT=m -CONFIG_NIC7018_WDT=m -CONFIG_MEN_A21_WDT=m -CONFIG_XEN_WDT=m - -# -# ISA-based Watchdog Cards -# -CONFIG_PCWATCHDOG=m -CONFIG_MIXCOMWD=m -CONFIG_WDT=m - -# -# PCI-based Watchdog Cards -# -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m - -# -# USB-based Watchdog Cards -# -CONFIG_USBPCWATCHDOG=m -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y -# CONFIG_SSB_PCMCIAHOST is not set -CONFIG_SSB_SDIOHOST_POSSIBLE=y -CONFIG_SSB_SDIOHOST=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_GPIO=y -CONFIG_BCMA_POSSIBLE=y -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_SFLASH=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -# CONFIG_BCMA_DEBUG is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -CONFIG_MFD_CS5535=m -CONFIG_MFD_AS3711=y -CONFIG_PMIC_ADP5520=y -CONFIG_MFD_AAT2870_CORE=y -CONFIG_MFD_BCM590XX=m -CONFIG_MFD_BD9571MWV=m -CONFIG_MFD_AXP20X=m -CONFIG_MFD_AXP20X_I2C=m -CONFIG_MFD_CROS_EC_DEV=m -CONFIG_MFD_MADERA=m -CONFIG_MFD_MADERA_I2C=m -CONFIG_MFD_MADERA_SPI=m -# CONFIG_MFD_CS47L15 is not set -# CONFIG_MFD_CS47L35 is not set -# CONFIG_MFD_CS47L85 is not set -# CONFIG_MFD_CS47L90 is not set -# CONFIG_MFD_CS47L92 is not set -CONFIG_PMIC_DA903X=y -CONFIG_PMIC_DA9052=y -CONFIG_MFD_DA9052_SPI=y -CONFIG_MFD_DA9052_I2C=y -CONFIG_MFD_DA9055=y -CONFIG_MFD_DA9062=m -CONFIG_MFD_DA9063=y -CONFIG_MFD_DA9150=m -CONFIG_MFD_DLN2=m -CONFIG_MFD_MC13XXX=m -CONFIG_MFD_MC13XXX_SPI=m -CONFIG_MFD_MC13XXX_I2C=m -CONFIG_HTC_PASIC3=m -CONFIG_HTC_I2CPLD=y -CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m -CONFIG_LPC_ICH=m -CONFIG_LPC_SCH=m -CONFIG_INTEL_SOC_PMIC=y -CONFIG_INTEL_SOC_PMIC_BXTWC=m -CONFIG_INTEL_SOC_PMIC_CHTWC=y -CONFIG_INTEL_SOC_PMIC_CHTDC_TI=m -CONFIG_INTEL_SOC_PMIC_MRFLD=m -CONFIG_MFD_INTEL_LPSS=m -CONFIG_MFD_INTEL_LPSS_ACPI=m -CONFIG_MFD_INTEL_LPSS_PCI=m -CONFIG_MFD_INTEL_MSIC=y -CONFIG_MFD_IQS62X=m -CONFIG_MFD_JANZ_CMODIO=m -CONFIG_MFD_KEMPLD=m -CONFIG_MFD_88PM800=m -CONFIG_MFD_88PM805=m -CONFIG_MFD_88PM860X=y -CONFIG_MFD_MAX14577=y -CONFIG_MFD_MAX77693=y -CONFIG_MFD_MAX77843=y -CONFIG_MFD_MAX8907=m -CONFIG_MFD_MAX8925=y -CONFIG_MFD_MAX8997=y -CONFIG_MFD_MAX8998=y -CONFIG_MFD_MT6397=m -CONFIG_MFD_MENF21BMC=m -CONFIG_EZX_PCAP=y -CONFIG_MFD_VIPERBOARD=m -CONFIG_MFD_RETU=m -CONFIG_MFD_PCF50633=m -CONFIG_PCF50633_ADC=m -CONFIG_PCF50633_GPIO=m -CONFIG_UCB1400_CORE=m -CONFIG_MFD_RDC321X=m -CONFIG_MFD_RT5033=m -CONFIG_MFD_RC5T583=y -CONFIG_MFD_SEC_CORE=y -CONFIG_MFD_SI476X_CORE=m -CONFIG_MFD_SM501=m -CONFIG_MFD_SM501_GPIO=y -CONFIG_MFD_SKY81452=m -CONFIG_MFD_SMSC=y -CONFIG_ABX500_CORE=y -CONFIG_AB3100_CORE=y -CONFIG_AB3100_OTP=m -CONFIG_MFD_SYSCON=y -CONFIG_MFD_TI_AM335X_TSCADC=m -CONFIG_MFD_LP3943=m -CONFIG_MFD_LP8788=y -CONFIG_MFD_TI_LMU=m -CONFIG_MFD_PALMAS=y -CONFIG_TPS6105X=m -CONFIG_TPS65010=m -CONFIG_TPS6507X=m -CONFIG_MFD_TPS65086=m -CONFIG_MFD_TPS65090=y -# CONFIG_MFD_TPS68470 is not set -CONFIG_MFD_TI_LP873X=m -CONFIG_MFD_TPS6586X=y -CONFIG_MFD_TPS65910=y -CONFIG_MFD_TPS65912=y -CONFIG_MFD_TPS65912_I2C=y -CONFIG_MFD_TPS65912_SPI=y -CONFIG_MFD_TPS80031=y -CONFIG_TWL4030_CORE=y -CONFIG_MFD_TWL4030_AUDIO=y -CONFIG_TWL6040_CORE=y -CONFIG_MFD_WL1273_CORE=m -CONFIG_MFD_LM3533=m -CONFIG_MFD_TIMBERDALE=m -CONFIG_MFD_TQMX86=m -CONFIG_MFD_VX855=m -CONFIG_MFD_ARIZONA=y -CONFIG_MFD_ARIZONA_I2C=m -CONFIG_MFD_ARIZONA_SPI=m -CONFIG_MFD_CS47L24=y -CONFIG_MFD_WM5102=y -CONFIG_MFD_WM5110=y -CONFIG_MFD_WM8997=y -CONFIG_MFD_WM8998=y -CONFIG_MFD_WM8400=y -CONFIG_MFD_WM831X=y -CONFIG_MFD_WM831X_I2C=y -CONFIG_MFD_WM831X_SPI=y -CONFIG_MFD_WM8350=y -CONFIG_MFD_WM8350_I2C=y -CONFIG_MFD_WM8994=m -CONFIG_RAVE_SP_CORE=m -# end of Multifunction device drivers - -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=m -CONFIG_REGULATOR_VIRTUAL_CONSUMER=m -CONFIG_REGULATOR_USERSPACE_CONSUMER=m -CONFIG_REGULATOR_88PG86X=m -CONFIG_REGULATOR_88PM800=m -CONFIG_REGULATOR_88PM8607=m -CONFIG_REGULATOR_ACT8865=m -CONFIG_REGULATOR_AD5398=m -CONFIG_REGULATOR_AAT2870=m -CONFIG_REGULATOR_AB3100=m -CONFIG_REGULATOR_ARIZONA_LDO1=m -CONFIG_REGULATOR_ARIZONA_MICSUPP=m -CONFIG_REGULATOR_AS3711=m -CONFIG_REGULATOR_AXP20X=m -CONFIG_REGULATOR_BCM590XX=m -CONFIG_REGULATOR_BD9571MWV=m -CONFIG_REGULATOR_DA903X=m -CONFIG_REGULATOR_DA9052=m -CONFIG_REGULATOR_DA9055=m -CONFIG_REGULATOR_DA9062=m -CONFIG_REGULATOR_DA9210=m -CONFIG_REGULATOR_DA9211=m -CONFIG_REGULATOR_FAN53555=m -CONFIG_REGULATOR_GPIO=m -CONFIG_REGULATOR_ISL9305=m -CONFIG_REGULATOR_ISL6271A=m -CONFIG_REGULATOR_LM363X=m -CONFIG_REGULATOR_LP3971=m -CONFIG_REGULATOR_LP3972=m -CONFIG_REGULATOR_LP872X=m -CONFIG_REGULATOR_LP8755=m -CONFIG_REGULATOR_LP8788=m -CONFIG_REGULATOR_LTC3589=m -CONFIG_REGULATOR_LTC3676=m -CONFIG_REGULATOR_MAX14577=m -CONFIG_REGULATOR_MAX1586=m -CONFIG_REGULATOR_MAX8649=m -CONFIG_REGULATOR_MAX8660=m -CONFIG_REGULATOR_MAX8907=m -CONFIG_REGULATOR_MAX8925=m -CONFIG_REGULATOR_MAX8952=m -CONFIG_REGULATOR_MAX8997=m -CONFIG_REGULATOR_MAX8998=m -CONFIG_REGULATOR_MAX77693=m -CONFIG_REGULATOR_MC13XXX_CORE=m -CONFIG_REGULATOR_MC13783=m -CONFIG_REGULATOR_MC13892=m -CONFIG_REGULATOR_MP8859=m -CONFIG_REGULATOR_MT6311=m -CONFIG_REGULATOR_MT6323=m -CONFIG_REGULATOR_MT6397=m -CONFIG_REGULATOR_PALMAS=m -CONFIG_REGULATOR_PCAP=m -CONFIG_REGULATOR_PCF50633=m -CONFIG_REGULATOR_PFUZE100=m -CONFIG_REGULATOR_PV88060=m -CONFIG_REGULATOR_PV88080=m -CONFIG_REGULATOR_PV88090=m -CONFIG_REGULATOR_PWM=m -CONFIG_REGULATOR_QCOM_SPMI=m -CONFIG_REGULATOR_RC5T583=m -CONFIG_REGULATOR_RT5033=m -CONFIG_REGULATOR_S2MPA01=m -CONFIG_REGULATOR_S2MPS11=m -CONFIG_REGULATOR_S5M8767=m -CONFIG_REGULATOR_SKY81452=m -CONFIG_REGULATOR_SLG51000=m -CONFIG_REGULATOR_TPS51632=m -CONFIG_REGULATOR_TPS6105X=m -CONFIG_REGULATOR_TPS62360=m -CONFIG_REGULATOR_TPS65023=m -CONFIG_REGULATOR_TPS6507X=m -CONFIG_REGULATOR_TPS65086=m -CONFIG_REGULATOR_TPS65090=m -CONFIG_REGULATOR_TPS65132=m -CONFIG_REGULATOR_TPS6524X=m -CONFIG_REGULATOR_TPS6586X=m -CONFIG_REGULATOR_TPS65910=m -CONFIG_REGULATOR_TPS65912=m -CONFIG_REGULATOR_TPS80031=m -CONFIG_REGULATOR_TWL4030=m -CONFIG_REGULATOR_WM831X=m -CONFIG_REGULATOR_WM8350=m -CONFIG_REGULATOR_WM8400=m -CONFIG_REGULATOR_WM8994=m -CONFIG_CEC_CORE=m -CONFIG_CEC_NOTIFIER=y -CONFIG_RC_CORE=m -CONFIG_RC_MAP=m -CONFIG_LIRC=y -CONFIG_RC_DECODERS=y -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m -CONFIG_IR_IMON_DECODER=m -CONFIG_IR_RCMM_DECODER=m -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -CONFIG_IR_ENE=m -CONFIG_IR_IMON=m -CONFIG_IR_IMON_RAW=m -CONFIG_IR_MCEUSB=m -CONFIG_IR_ITE_CIR=m -CONFIG_IR_FINTEK=m -CONFIG_IR_NUVOTON=m -CONFIG_IR_REDRAT3=m -CONFIG_IR_STREAMZAP=m -CONFIG_IR_WINBOND_CIR=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -CONFIG_RC_LOOPBACK=m -CONFIG_IR_SERIAL=m -CONFIG_IR_SERIAL_TRANSMITTER=y -CONFIG_IR_SIR=m -CONFIG_RC_XBOX_DVD=m -CONFIG_MEDIA_SUPPORT=m - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -# CONFIG_MEDIA_CEC_RC is not set -CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_CONTROLLER_DVB=y -# CONFIG_MEDIA_CONTROLLER_REQUEST_API is not set -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_SUBDEV_API=y -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L2_I2C=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_V4L2_FLASH_LED_CLASS=m -CONFIG_V4L2_FWNODE=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_DVB_CORE=m -# CONFIG_DVB_MMAP is not set -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=8 -CONFIG_DVB_DYNAMIC_MINORS=y -# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set -# CONFIG_DVB_ULE_DEBUG is not set - -# -# Media drivers -# -CONFIG_MEDIA_USB_SUPPORT=y - -# -# Webcam devices -# -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -CONFIG_VIDEO_TM6000=m -CONFIG_VIDEO_TM6000_ALSA=m -CONFIG_VIDEO_TM6000_DVB=m - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_CXUSB_ANALOG=y -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -CONFIG_DVB_USB_ZD1301=m -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m - -# -# Webcam, TV (analog/digital) USB devices -# -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# Software defined radio USB devices -# -CONFIG_USB_AIRSPY=m -CONFIG_USB_HACKRF=m -CONFIG_USB_MSI2500=m - -# -# USB HDMI CEC adapters -# -CONFIG_USB_PULSE8_CEC=m -CONFIG_USB_RAINSHADOW_CEC=m -CONFIG_MEDIA_PCI_SUPPORT=y - -# -# Media capture support -# -CONFIG_VIDEO_MEYE=m -CONFIG_VIDEO_SOLO6X10=m -CONFIG_VIDEO_TW5864=m -CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_TW686X=m - -# -# Media capture/analog TV support -# -CONFIG_VIDEO_IVTV=m -# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set -CONFIG_VIDEO_IVTV_ALSA=m -CONFIG_VIDEO_FB_IVTV=m -# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not set -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DT3155=m - -# -# Media capture/analog/hybrid TV support -# -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CX18_ALSA=m -CONFIG_VIDEO_CX23885=m -CONFIG_MEDIA_ALTERA_CI=m -CONFIG_VIDEO_CX25821=m -CONFIG_VIDEO_CX25821_ALSA=m -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_ENABLE_VP3054=y -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_BT848=m -CONFIG_DVB_BT8XX=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_RC=y -CONFIG_VIDEO_SAA7134_DVB=m -CONFIG_VIDEO_SAA7134_GO7007=m -CONFIG_VIDEO_SAA7164=m -CONFIG_VIDEO_COBALT=m - -# -# Media digital TV PCI Adapters -# -CONFIG_DVB_AV7110_IR=y -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set -CONFIG_DVB_PLUTO2=m -CONFIG_DVB_DM1105=m -CONFIG_DVB_PT1=m -CONFIG_DVB_PT3=m -CONFIG_MANTIS_CORE=m -CONFIG_DVB_MANTIS=m -CONFIG_DVB_HOPPER=m -CONFIG_DVB_NGENE=m -CONFIG_DVB_DDBRIDGE=m -# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set -CONFIG_DVB_SMIPCIE=m -CONFIG_DVB_NETUP_UNIDVB=m -CONFIG_VIDEO_IPU3_CIO2=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_VIDEO_VIA_CAMERA=m -CONFIG_VIDEO_CADENCE=y -CONFIG_VIDEO_CADENCE_CSI2RX=m -CONFIG_VIDEO_CADENCE_CSI2TX=m -CONFIG_VIDEO_ASPEED=m -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m -CONFIG_VIDEO_SH_VEU=m -CONFIG_V4L_TEST_DRIVERS=y -# CONFIG_VIDEO_VIMC is not set -CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_VIVID_CEC=y -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -CONFIG_VIDEO_VIM2M=m -CONFIG_VIDEO_VICODEC=m -CONFIG_DVB_PLATFORM_DRIVERS=y -CONFIG_CEC_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CROS_EC_CEC=m -CONFIG_VIDEO_SECO_CEC=m -# CONFIG_VIDEO_SECO_RC is not set -CONFIG_SDR_PLATFORM_DRIVERS=y - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_TEA575X=m -CONFIG_RADIO_SI470X=m -CONFIG_USB_SI470X=m -CONFIG_I2C_SI470X=m -CONFIG_RADIO_SI4713=m -CONFIG_USB_SI4713=m -CONFIG_PLATFORM_SI4713=m -CONFIG_I2C_SI4713=m -CONFIG_RADIO_SI476X=m -CONFIG_USB_MR800=m -CONFIG_USB_DSBR=m -CONFIG_RADIO_MAXIRADIO=m -CONFIG_RADIO_SHARK=m -CONFIG_RADIO_SHARK2=m -CONFIG_USB_KEENE=m -CONFIG_USB_RAREMONO=m -CONFIG_USB_MA901=m -CONFIG_RADIO_TEA5764=m -CONFIG_RADIO_SAA7706H=m -CONFIG_RADIO_TEF6862=m -CONFIG_RADIO_TIMBERDALE=m -CONFIG_RADIO_WL1273=m - -# -# Texas Instruments WL128x FM driver (ST based) -# -CONFIG_RADIO_WL128X=m -# end of Texas Instruments WL128x FM driver (ST based) - -CONFIG_V4L_RADIO_ISA_DRIVERS=y -CONFIG_RADIO_ISA=m -CONFIG_RADIO_CADET=m -CONFIG_RADIO_RTRACK=m -CONFIG_RADIO_RTRACK2=m -CONFIG_RADIO_AZTECH=m -CONFIG_RADIO_GEMTEK=m -CONFIG_RADIO_MIROPCM20=m -CONFIG_RADIO_SF16FMI=m -CONFIG_RADIO_SF16FMR2=m -CONFIG_RADIO_TERRATEC=m -CONFIG_RADIO_TRUST=m -CONFIG_RADIO_TYPHOON=m -CONFIG_RADIO_ZOLTRIX=m - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_V4L2=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -CONFIG_SMS_SIANO_DEBUGFS=y -CONFIG_VIDEO_V4L2_TPG=m - -# -# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=m - -# -# I2C Encoders, decoders, sensors and other helper chips -# - -# -# Audio decoders, processors and mixers -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TDA1997X=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS3308=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_TLV320AIC23B=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m -CONFIG_VIDEO_SONY_BTF_MPX=m - -# -# RDS decoders -# -CONFIG_VIDEO_SAA6588=m - -# -# Video decoders -# -CONFIG_VIDEO_ADV7180=m -CONFIG_VIDEO_ADV7183=m -CONFIG_VIDEO_ADV7604=m -CONFIG_VIDEO_ADV7604_CEC=y -CONFIG_VIDEO_ADV7842=m -CONFIG_VIDEO_ADV7842_CEC=y -CONFIG_VIDEO_BT819=m -CONFIG_VIDEO_BT856=m -CONFIG_VIDEO_BT866=m -CONFIG_VIDEO_KS0127=m -CONFIG_VIDEO_ML86V7667=m -CONFIG_VIDEO_SAA7110=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TC358743=m -CONFIG_VIDEO_TC358743_CEC=y -CONFIG_VIDEO_TVP514X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TVP7002=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m -CONFIG_VIDEO_TW9910=m -CONFIG_VIDEO_VPX3220=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_CX25840=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m -CONFIG_VIDEO_SAA7185=m -CONFIG_VIDEO_ADV7170=m -CONFIG_VIDEO_ADV7175=m -CONFIG_VIDEO_ADV7343=m -CONFIG_VIDEO_ADV7393=m -CONFIG_VIDEO_ADV7511=m -CONFIG_VIDEO_ADV7511_CEC=y -CONFIG_VIDEO_AD9389B=m -CONFIG_VIDEO_AK881X=m -CONFIG_VIDEO_THS8200=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_APTINA_PLL=m -CONFIG_VIDEO_SMIAPP_PLL=m -CONFIG_VIDEO_HI556=m -CONFIG_VIDEO_IMX214=m -CONFIG_VIDEO_IMX219=m -CONFIG_VIDEO_IMX258=m -CONFIG_VIDEO_IMX274=m -CONFIG_VIDEO_IMX290=m -CONFIG_VIDEO_IMX319=m -CONFIG_VIDEO_IMX355=m -CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV2659=m -CONFIG_VIDEO_OV2680=m -CONFIG_VIDEO_OV2685=m -CONFIG_VIDEO_OV5647=m -CONFIG_VIDEO_OV6650=m -CONFIG_VIDEO_OV5670=m -CONFIG_VIDEO_OV5675=m -CONFIG_VIDEO_OV5695=m -CONFIG_VIDEO_OV7251=m -CONFIG_VIDEO_OV772X=m -CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_OV7740=m -CONFIG_VIDEO_OV8856=m -CONFIG_VIDEO_OV9640=m -CONFIG_VIDEO_OV9650=m -CONFIG_VIDEO_OV13858=m -CONFIG_VIDEO_VS6624=m -CONFIG_VIDEO_MT9M001=m -CONFIG_VIDEO_MT9M032=m -CONFIG_VIDEO_MT9M111=m -CONFIG_VIDEO_MT9P031=m -CONFIG_VIDEO_MT9T001=m -CONFIG_VIDEO_MT9T112=m -CONFIG_VIDEO_MT9V011=m -CONFIG_VIDEO_MT9V032=m -CONFIG_VIDEO_MT9V111=m -CONFIG_VIDEO_SR030PC30=m -CONFIG_VIDEO_NOON010PC30=m -CONFIG_VIDEO_M5MOLS=m -CONFIG_VIDEO_RJ54N1=m -CONFIG_VIDEO_S5K6AA=m -CONFIG_VIDEO_S5K6A3=m -CONFIG_VIDEO_S5K4ECGX=m -CONFIG_VIDEO_S5K5BAF=m -CONFIG_VIDEO_SMIAPP=m -CONFIG_VIDEO_ET8EK8=m -CONFIG_VIDEO_S5C73M3=m - -# -# Lens drivers -# -CONFIG_VIDEO_AD5820=m -CONFIG_VIDEO_AK7375=m -CONFIG_VIDEO_DW9714=m -CONFIG_VIDEO_DW9807_VCM=m - -# -# Flash devices -# -CONFIG_VIDEO_ADP1653=m -CONFIG_VIDEO_LM3560=m -CONFIG_VIDEO_LM3646=m - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m - -# -# Audio/Video compression chips -# -CONFIG_VIDEO_SAA6752HS=m - -# -# SDR tuner chips -# -CONFIG_SDR_MAX2175=m - -# -# Miscellaneous helper chips -# -CONFIG_VIDEO_THS7303=m -CONFIG_VIDEO_M52790=m -CONFIG_VIDEO_I2C=m -CONFIG_VIDEO_ST_MIPID02=m -# end of I2C Encoders, decoders, sensors and other helper chips - -# -# SPI helper chips -# -CONFIG_VIDEO_GS1662=m -# end of SPI helper chips - -# -# Media SPI Adapters -# -CONFIG_CXD2880_SPI_DRV=m -# end of Media SPI Adapters - -CONFIG_MEDIA_TUNER=m - -# -# Customize TV tuners -# -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA18250=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_XC4000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=m -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_M88RS6000T=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_MXL301RF=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m -CONFIG_MEDIA_TUNER_QM1D1B0004=m -# end of Customize TV tuners - -# -# Customise DVB Frontends -# - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV0910=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_STV6111=m -CONFIG_DVB_MXL5XX=m -CONFIG_DVB_M88DS3103=m - -# -# Multistandard (cable + terrestrial) frontends -# -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10036=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24117=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_MB86A16=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_S5H1432=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_DIB9000=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_STV0367=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_CXD2841ER=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_RTL2832_SDR=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_ZD1301_DEMOD=m -CONFIG_DVB_GP8PSK_FE=m -CONFIG_DVB_CXD2880=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m -CONFIG_DVB_MN88443X=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBH25=m -CONFIG_DVB_LNBH29=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_LGS8GL5=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_TDA665x=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m -CONFIG_DVB_HORUS3A=m -CONFIG_DVB_ASCOT2E=m -CONFIG_DVB_HELENE=m - -# -# Common Interface (EN50221) controller drivers -# -CONFIG_DVB_CXD2099=m -CONFIG_DVB_SP2=m - -# -# Tools to develop new frontends -# -CONFIG_DVB_DUMMY_FE=m -# end of Customise DVB Frontends - -# -# Graphics support -# -CONFIG_AGP=y -CONFIG_AGP_ALI=m -CONFIG_AGP_ATI=m -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -CONFIG_AGP_NVIDIA=y -CONFIG_AGP_SIS=m -CONFIG_AGP_SWORKS=m -CONFIG_AGP_VIA=y -CONFIG_AGP_EFFICEON=m -CONFIG_INTEL_GTT=y -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_VGA_SWITCHEROO=y -CONFIG_DRM=m -CONFIG_DRM_MIPI_DBI=m -CONFIG_DRM_MIPI_DSI=y -# CONFIG_DRM_DP_AUX_CHARDEV is not set -# CONFIG_DRM_DEBUG_SELFTEST is not set -CONFIG_DRM_KMS_HELPER=m -CONFIG_DRM_KMS_FB_HELPER=y -# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set -CONFIG_DRM_LOAD_EDID_FIRMWARE=y -# CONFIG_DRM_DP_CEC is not set -CONFIG_DRM_TTM=m -CONFIG_DRM_TTM_DMA_PAGE_POOL=y -CONFIG_DRM_VRAM_HELPER=m -CONFIG_DRM_TTM_HELPER=m -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y -CONFIG_DRM_GEM_SHMEM_HELPER=y -CONFIG_DRM_SCHED=m - -# -# I2C encoder or helper chips -# -CONFIG_DRM_I2C_CH7006=m -CONFIG_DRM_I2C_SIL164=m -CONFIG_DRM_I2C_NXP_TDA998X=m -CONFIG_DRM_I2C_NXP_TDA9950=m -# end of I2C encoder or helper chips - -# -# ARM devices -# -# end of ARM devices - -CONFIG_DRM_RADEON=m -# CONFIG_DRM_RADEON_USERPTR is not set -CONFIG_DRM_AMDGPU=m -# CONFIG_DRM_AMDGPU_SI is not set -# CONFIG_DRM_AMDGPU_CIK is not set -CONFIG_DRM_AMDGPU_USERPTR=y -# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set - -# -# ACP (Audio CoProcessor) Configuration -# -# CONFIG_DRM_AMD_ACP is not set -# end of ACP (Audio CoProcessor) Configuration - -# -# Display Engine Configuration -# -CONFIG_DRM_AMD_DC=y -CONFIG_DRM_AMD_DC_DCN=y -# CONFIG_DRM_AMD_DC_HDCP is not set -# CONFIG_DEBUG_KERNEL_DC is not set -# end of Display Engine Configuration - -CONFIG_DRM_NOUVEAU=m -# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set -CONFIG_NOUVEAU_DEBUG=5 -CONFIG_NOUVEAU_DEBUG_DEFAULT=3 -# CONFIG_NOUVEAU_DEBUG_MMU is not set -CONFIG_DRM_NOUVEAU_BACKLIGHT=y -CONFIG_DRM_I915=m -CONFIG_DRM_I915_FORCE_PROBE="" -CONFIG_DRM_I915_CAPTURE_ERROR=y -CONFIG_DRM_I915_COMPRESS_ERROR=y -CONFIG_DRM_I915_USERPTR=y - -# -# drm/i915 Debugging -# -# CONFIG_DRM_I915_WERROR is not set -# CONFIG_DRM_I915_DEBUG is not set -# CONFIG_DRM_I915_DEBUG_MMIO is not set -# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set -# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set -# CONFIG_DRM_I915_DEBUG_GUC is not set -# CONFIG_DRM_I915_SELFTEST is not set -# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set -# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set -# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set -# end of drm/i915 Debugging - -# -# drm/i915 Profile Guided Optimisation -# -CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250 -CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500 -CONFIG_DRM_I915_PREEMPT_TIMEOUT=640 -CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000 -CONFIG_DRM_I915_STOP_TIMEOUT=100 -CONFIG_DRM_I915_TIMESLICE_DURATION=1 -# end of drm/i915 Profile Guided Optimisation - -CONFIG_DRM_VGEM=m -# CONFIG_DRM_VKMS is not set -CONFIG_DRM_VMWGFX=m -CONFIG_DRM_VMWGFX_FBCON=y -CONFIG_DRM_GMA500=m -CONFIG_DRM_GMA600=y -CONFIG_DRM_GMA3600=y -CONFIG_DRM_MEDFIELD=y -CONFIG_DRM_UDL=m -CONFIG_DRM_AST=m -# CONFIG_DRM_MGAG200 is not set -CONFIG_DRM_CIRRUS_QEMU=m -CONFIG_DRM_QXL=m -CONFIG_DRM_BOCHS=m -CONFIG_DRM_VIRTIO_GPU=m -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set -# end of Display Panels - -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_PANEL_BRIDGE=y - -# -# Display Interface Bridges -# -CONFIG_DRM_ANALOGIX_ANX78XX=m -CONFIG_DRM_ANALOGIX_DP=m -# end of Display Interface Bridges - -# CONFIG_DRM_ETNAVIV is not set -CONFIG_DRM_GM12U320=m -CONFIG_TINYDRM_HX8357D=m -CONFIG_TINYDRM_ILI9225=m -CONFIG_TINYDRM_ILI9341=m -CONFIG_TINYDRM_ILI9486=m -CONFIG_TINYDRM_MI0283QT=m -CONFIG_TINYDRM_REPAPER=m -CONFIG_TINYDRM_ST7586=m -CONFIG_TINYDRM_ST7735R=m -CONFIG_DRM_XEN=y -CONFIG_DRM_XEN_FRONTEND=m -CONFIG_DRM_VBOXVIDEO=m -# CONFIG_DRM_LEGACY is not set -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y - -# -# Frame buffer Devices -# -CONFIG_FB_CMDLINE=y -CONFIG_FB_NOTIFY=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_DDC=m -CONFIG_FB_BOOT_VESA_SUPPORT=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SYS_FILLRECT=m -CONFIG_FB_SYS_COPYAREA=m -CONFIG_FB_SYS_IMAGEBLIT=m -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=m -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_HECUBA=m -CONFIG_FB_SVGALIB=m -CONFIG_FB_BACKLIGHT=m -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -CONFIG_FB_CIRRUS=m -CONFIG_FB_PM2=m -CONFIG_FB_PM2_FIFO_DISCONNECT=y -CONFIG_FB_CYBER2000=m -CONFIG_FB_CYBER2000_DDC=y -CONFIG_FB_ARC=m -CONFIG_FB_ASILIANT=y -CONFIG_FB_IMSTT=y -CONFIG_FB_VGA16=m -CONFIG_FB_UVESA=m -CONFIG_FB_VESA=y -CONFIG_FB_EFI=y -CONFIG_FB_N411=m -CONFIG_FB_HGA=m -CONFIG_FB_OPENCORES=m -CONFIG_FB_S1D13XXX=m -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_RIVA=m -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set -CONFIG_FB_RIVA_BACKLIGHT=y -CONFIG_FB_I740=m -CONFIG_FB_I810=m -# CONFIG_FB_I810_GTF is not set -CONFIG_FB_LE80578=m -CONFIG_FB_CARILLO_RANCH=m -CONFIG_FB_INTEL=m -# CONFIG_FB_INTEL_DEBUG is not set -CONFIG_FB_INTEL_I2C=y -CONFIG_FB_MATROX=m -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -CONFIG_FB_MATROX_I2C=m -CONFIG_FB_MATROX_MAVEN=m -CONFIG_FB_RADEON=m -CONFIG_FB_RADEON_I2C=y -CONFIG_FB_RADEON_BACKLIGHT=y -# CONFIG_FB_RADEON_DEBUG is not set -CONFIG_FB_ATY128=m -CONFIG_FB_ATY128_BACKLIGHT=y -CONFIG_FB_ATY=m -CONFIG_FB_ATY_CT=y -# CONFIG_FB_ATY_GENERIC_LCD is not set -CONFIG_FB_ATY_GX=y -CONFIG_FB_ATY_BACKLIGHT=y -CONFIG_FB_S3=m -CONFIG_FB_S3_DDC=y -CONFIG_FB_SAVAGE=m -CONFIG_FB_SAVAGE_I2C=y -# CONFIG_FB_SAVAGE_ACCEL is not set -CONFIG_FB_SIS=m -CONFIG_FB_SIS_300=y -CONFIG_FB_SIS_315=y -CONFIG_FB_VIA=m -# CONFIG_FB_VIA_DIRECT_PROCFS is not set -CONFIG_FB_VIA_X_COMPATIBILITY=y -CONFIG_FB_NEOMAGIC=m -CONFIG_FB_KYRO=m -CONFIG_FB_3DFX=m -# CONFIG_FB_3DFX_ACCEL is not set -# CONFIG_FB_3DFX_I2C is not set -CONFIG_FB_VOODOO1=m -CONFIG_FB_VT8623=m -CONFIG_FB_TRIDENT=m -CONFIG_FB_ARK=m -CONFIG_FB_PM3=m -CONFIG_FB_CARMINE=m -CONFIG_FB_CARMINE_DRAM_EVAL=y -# CONFIG_CARMINE_DRAM_CUSTOM is not set -CONFIG_FB_GEODE=y -CONFIG_FB_GEODE_LX=m -CONFIG_FB_GEODE_GX=m -CONFIG_FB_GEODE_GX1=m -CONFIG_FB_SM501=m -CONFIG_FB_SMSCUFX=m -CONFIG_FB_UDL=m -CONFIG_FB_IBM_GXT4500=m -# CONFIG_FB_VIRTUAL is not set -CONFIG_XEN_FBDEV_FRONTEND=m -CONFIG_FB_METRONOME=m -CONFIG_FB_MB862XX=m -CONFIG_FB_MB862XX_PCI_GDC=y -CONFIG_FB_MB862XX_I2C=y -CONFIG_FB_HYPERV=m -CONFIG_FB_SIMPLE=y -CONFIG_FB_SM712=m -# end of Frame buffer Devices - -# -# Backlight & LCD device support -# -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_L4F00242T03=m -CONFIG_LCD_LMS283GF05=m -CONFIG_LCD_LTV350QV=m -CONFIG_LCD_ILI922X=m -CONFIG_LCD_ILI9320=m -CONFIG_LCD_TDO24M=m -CONFIG_LCD_VGG2432A4=m -CONFIG_LCD_PLATFORM=m -CONFIG_LCD_AMS369FG06=m -CONFIG_LCD_LMS501KF03=m -CONFIG_LCD_HX8357=m -CONFIG_LCD_OTM3225A=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m -CONFIG_BACKLIGHT_LM3533=m -CONFIG_BACKLIGHT_CARILLO_RANCH=m -CONFIG_BACKLIGHT_PWM=m -CONFIG_BACKLIGHT_DA903X=m -CONFIG_BACKLIGHT_DA9052=m -CONFIG_BACKLIGHT_MAX8925=m -CONFIG_BACKLIGHT_APPLE=m -CONFIG_BACKLIGHT_QCOM_WLED=m -CONFIG_BACKLIGHT_SAHARA=m -CONFIG_BACKLIGHT_WM831X=m -CONFIG_BACKLIGHT_ADP5520=m -CONFIG_BACKLIGHT_ADP8860=m -CONFIG_BACKLIGHT_ADP8870=m -CONFIG_BACKLIGHT_88PM860X=m -CONFIG_BACKLIGHT_PCF50633=m -CONFIG_BACKLIGHT_AAT2870=m -CONFIG_BACKLIGHT_LM3630A=m -CONFIG_BACKLIGHT_LM3639=m -CONFIG_BACKLIGHT_LP855X=m -CONFIG_BACKLIGHT_LP8788=m -CONFIG_BACKLIGHT_PANDORA=m -CONFIG_BACKLIGHT_SKY81452=m -CONFIG_BACKLIGHT_AS3711=m -CONFIG_BACKLIGHT_GPIO=m -CONFIG_BACKLIGHT_LV5207LP=m -CONFIG_BACKLIGHT_BD6107=m -CONFIG_BACKLIGHT_ARCXCNN=m -CONFIG_BACKLIGHT_RAVE_SP=m -# end of Backlight & LCD device support - -CONFIG_VGASTATE=m -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_MDA_CONSOLE=m -CONFIG_DUMMY_CONSOLE=y -CONFIG_DUMMY_CONSOLE_COLUMNS=80 -CONFIG_DUMMY_CONSOLE_ROWS=25 -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set -# end of Console display driver support - -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# end of Graphics support - -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_SEQ_DEVICE=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_COMPRESS_OFFLOAD=m -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_DMA_SGBUF=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_SEQUENCER_OSS is not set -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -CONFIG_SND_SEQ_MIDI_EVENT=m -CONFIG_SND_SEQ_MIDI=m -CONFIG_SND_SEQ_MIDI_EMUL=m -CONFIG_SND_SEQ_VIRMIDI=m -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_OPL4_LIB=m -CONFIG_SND_OPL3_LIB_SEQ=m -CONFIG_SND_OPL4_LIB_SEQ=m -CONFIG_SND_VX_LIB=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -CONFIG_SND_PCSP=m -CONFIG_SND_DUMMY=m -CONFIG_SND_ALOOP=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -CONFIG_SND_MTS64=m -CONFIG_SND_SERIAL_U16550=m -CONFIG_SND_MPU401=m -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_WSS_LIB=m -CONFIG_SND_SB_COMMON=m -CONFIG_SND_SB8_DSP=m -CONFIG_SND_SB16_DSP=m -CONFIG_SND_ISA=y -CONFIG_SND_ADLIB=m -CONFIG_SND_AD1816A=m -CONFIG_SND_AD1848=m -CONFIG_SND_ALS100=m -CONFIG_SND_AZT1605=m -CONFIG_SND_AZT2316=m -CONFIG_SND_AZT2320=m -CONFIG_SND_CMI8328=m -CONFIG_SND_CMI8330=m -CONFIG_SND_CS4231=m -CONFIG_SND_CS4236=m -CONFIG_SND_ES1688=m -CONFIG_SND_ES18XX=m -CONFIG_SND_SC6000=m -CONFIG_SND_GUSCLASSIC=m -CONFIG_SND_GUSEXTREME=m -CONFIG_SND_GUSMAX=m -CONFIG_SND_INTERWAVE=m -CONFIG_SND_INTERWAVE_STB=m -CONFIG_SND_JAZZ16=m -CONFIG_SND_OPL3SA2=m -CONFIG_SND_OPTI92X_AD1848=m -CONFIG_SND_OPTI92X_CS4231=m -CONFIG_SND_OPTI93X=m -CONFIG_SND_MIRO=m -CONFIG_SND_SB8=m -CONFIG_SND_SB16=m -CONFIG_SND_SBAWE=m -CONFIG_SND_SBAWE_SEQ=m -CONFIG_SND_SB16_CSP=y -CONFIG_SND_SSCAPE=m -CONFIG_SND_WAVEFRONT=m -CONFIG_SND_MSND_PINNACLE=m -CONFIG_SND_MSND_CLASSIC=m -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -CONFIG_SND_ALS300=m -CONFIG_SND_ALS4000=m -CONFIG_SND_ALI5451=m -CONFIG_SND_ASIHPI=m -CONFIG_SND_ATIIXP=m -CONFIG_SND_ATIIXP_MODEM=m -CONFIG_SND_AU8810=m -CONFIG_SND_AU8820=m -CONFIG_SND_AU8830=m -CONFIG_SND_AW2=m -CONFIG_SND_AZT3328=m -CONFIG_SND_BT87X=m -# CONFIG_SND_BT87X_OVERCLOCK is not set -CONFIG_SND_CA0106=m -CONFIG_SND_CMIPCI=m -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -CONFIG_SND_CS4281=m -CONFIG_SND_CS46XX=m -CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS5530=m -CONFIG_SND_CS5535AUDIO=m -CONFIG_SND_CTXFI=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_INDIGOIOX=m -CONFIG_SND_INDIGODJX=m -CONFIG_SND_EMU10K1=m -CONFIG_SND_EMU10K1_SEQ=m -CONFIG_SND_EMU10K1X=m -CONFIG_SND_ENS1370=m -CONFIG_SND_ENS1371=m -CONFIG_SND_ES1938=m -CONFIG_SND_ES1968=m -CONFIG_SND_ES1968_INPUT=y -CONFIG_SND_ES1968_RADIO=y -CONFIG_SND_FM801=m -CONFIG_SND_FM801_TEA575X_BOOL=y -CONFIG_SND_HDSP=m -CONFIG_SND_HDSPM=m -CONFIG_SND_ICE1712=m -CONFIG_SND_ICE1724=m -CONFIG_SND_INTEL8X0=m -CONFIG_SND_INTEL8X0M=m -CONFIG_SND_KORG1212=m -CONFIG_SND_LOLA=m -CONFIG_SND_LX6464ES=m -CONFIG_SND_MAESTRO3=m -CONFIG_SND_MAESTRO3_INPUT=y -CONFIG_SND_MIXART=m -CONFIG_SND_NM256=m -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -CONFIG_SND_RME32=m -CONFIG_SND_RME96=m -CONFIG_SND_RME9652=m -CONFIG_SND_SIS7019=m -CONFIG_SND_SONICVIBES=m -CONFIG_SND_TRIDENT=m -CONFIG_SND_VIA82XX=m -CONFIG_SND_VIA82XX_MODEM=m -CONFIG_SND_VIRTUOSO=m -CONFIG_SND_VX222=m -CONFIG_SND_YMFPCI=m - -# -# HD-Audio -# -CONFIG_SND_HDA=m -CONFIG_SND_HDA_INTEL=m -CONFIG_SND_HDA_HWDEP=y -CONFIG_SND_HDA_RECONFIG=y -CONFIG_SND_HDA_INPUT_BEEP=y -CONFIG_SND_HDA_INPUT_BEEP_MODE=0 -CONFIG_SND_HDA_PATCH_LOADER=y -CONFIG_SND_HDA_CODEC_REALTEK=m -CONFIG_SND_HDA_CODEC_ANALOG=m -CONFIG_SND_HDA_CODEC_SIGMATEL=m -CONFIG_SND_HDA_CODEC_VIA=m -CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_HDA_CODEC_CIRRUS=m -CONFIG_SND_HDA_CODEC_CONEXANT=m -CONFIG_SND_HDA_CODEC_CA0110=m -CONFIG_SND_HDA_CODEC_CA0132=m -CONFIG_SND_HDA_CODEC_CA0132_DSP=y -CONFIG_SND_HDA_CODEC_CMEDIA=m -CONFIG_SND_HDA_CODEC_SI3054=m -CONFIG_SND_HDA_GENERIC=m -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -# end of HD-Audio - -CONFIG_SND_HDA_CORE=m -CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_COMPONENT=y -CONFIG_SND_HDA_I915=y -CONFIG_SND_HDA_EXT_CORE=m -CONFIG_SND_HDA_PREALLOC_SIZE=64 -CONFIG_SND_INTEL_NHLT=y -CONFIG_SND_INTEL_DSP_CONFIG=m -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_USX2Y=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_US122L=m -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_FIREWIRE=y -CONFIG_SND_FIREWIRE_LIB=m -CONFIG_SND_DICE=m -CONFIG_SND_OXFW=m -CONFIG_SND_ISIGHT=m -CONFIG_SND_FIREWORKS=m -CONFIG_SND_BEBOB=m -CONFIG_SND_FIREWIRE_DIGI00X=m -CONFIG_SND_FIREWIRE_TASCAM=m -CONFIG_SND_FIREWIRE_MOTU=m -CONFIG_SND_FIREFACE=m -CONFIG_SND_PCMCIA=y -CONFIG_SND_VXPOCKET=m -CONFIG_SND_PDAUDIOCF=m -CONFIG_SND_SOC=m -CONFIG_SND_SOC_AC97_BUS=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -CONFIG_SND_SOC_COMPRESS=y -CONFIG_SND_SOC_TOPOLOGY=y -CONFIG_SND_SOC_ACPI=m -CONFIG_SND_SOC_AMD_ACP=m -CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m -CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m -CONFIG_SND_SOC_AMD_ACP3x=m -CONFIG_SND_SOC_AMD_RV_RT5682_MACH=m -CONFIG_SND_ATMEL_SOC=m -CONFIG_SND_BCM63XX_I2S_WHISTLER=m -CONFIG_SND_DESIGNWARE_I2S=m -# CONFIG_SND_DESIGNWARE_PCM is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -CONFIG_SND_SOC_FSL_ASRC=m -CONFIG_SND_SOC_FSL_SAI=m -CONFIG_SND_SOC_FSL_MQS=m -CONFIG_SND_SOC_FSL_AUDMIX=m -CONFIG_SND_SOC_FSL_SSI=m -CONFIG_SND_SOC_FSL_SPDIF=m -CONFIG_SND_SOC_FSL_ESAI=m -CONFIG_SND_SOC_FSL_MICFIL=m -CONFIG_SND_SOC_IMX_AUDMUX=m -# end of SoC Audio for Freescale CPUs - -CONFIG_SND_I2S_HI6210_I2S=m -# CONFIG_SND_SOC_IMG is not set -CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y -CONFIG_SND_SST_IPC=m -CONFIG_SND_SST_IPC_PCI=m -CONFIG_SND_SST_IPC_ACPI=m -CONFIG_SND_SOC_INTEL_SST_ACPI=m -CONFIG_SND_SOC_INTEL_SST=m -CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m -CONFIG_SND_SOC_INTEL_HASWELL=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m -CONFIG_SND_SOC_INTEL_SKYLAKE=m -CONFIG_SND_SOC_INTEL_SKL=m -CONFIG_SND_SOC_INTEL_APL=m -CONFIG_SND_SOC_INTEL_KBL=m -CONFIG_SND_SOC_INTEL_GLK=m -CONFIG_SND_SOC_INTEL_CNL=m -CONFIG_SND_SOC_INTEL_CFL=m -CONFIG_SND_SOC_INTEL_CML_H=m -CONFIG_SND_SOC_INTEL_CML_LP=m -CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m -CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m -CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y -CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m -CONFIG_SND_SOC_ACPI_INTEL_MATCH=m -CONFIG_SND_SOC_INTEL_MACH=y -# CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set -CONFIG_SND_SOC_INTEL_HASWELL_MACH=m -CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=m -CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m -CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m -CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m -CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m -CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m -CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m -CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m -CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON=m -CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=m -CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m -CONFIG_SND_SOC_MTK_BTCVSD=m -CONFIG_SND_SOC_SOF_TOPLEVEL=y -CONFIG_SND_SOC_SOF_PCI=m -CONFIG_SND_SOC_SOF_ACPI=m -# CONFIG_SND_SOC_SOF_DEBUG_PROBES is not set -# CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT is not set -CONFIG_SND_SOC_SOF=m -# CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL is not set - -# -# STMicroelectronics STM32 SOC audio support -# -# end of STMicroelectronics STM32 SOC audio support - -CONFIG_SND_SOC_XILINX_I2S=m -# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set -# CONFIG_SND_SOC_XILINX_SPDIF is not set -CONFIG_SND_SOC_XTFPGA_I2S=m -CONFIG_ZX_TDM=m -CONFIG_SND_SOC_I2C_AND_SPI=m - -# -# CODEC drivers -# -CONFIG_SND_SOC_AC97_CODEC=m -CONFIG_SND_SOC_ADAU_UTILS=m -CONFIG_SND_SOC_ADAU1701=m -CONFIG_SND_SOC_ADAU17X1=m -CONFIG_SND_SOC_ADAU1761=m -CONFIG_SND_SOC_ADAU1761_I2C=m -CONFIG_SND_SOC_ADAU1761_SPI=m -CONFIG_SND_SOC_ADAU7002=m -CONFIG_SND_SOC_ADAU7118=m -CONFIG_SND_SOC_ADAU7118_HW=m -CONFIG_SND_SOC_ADAU7118_I2C=m -CONFIG_SND_SOC_AK4104=m -CONFIG_SND_SOC_AK4118=m -CONFIG_SND_SOC_AK4458=m -CONFIG_SND_SOC_AK4554=m -CONFIG_SND_SOC_AK4613=m -CONFIG_SND_SOC_AK4642=m -CONFIG_SND_SOC_AK5386=m -CONFIG_SND_SOC_AK5558=m -CONFIG_SND_SOC_ALC5623=m -CONFIG_SND_SOC_BD28623=m -CONFIG_SND_SOC_BT_SCO=m -CONFIG_SND_SOC_CROS_EC_CODEC=m -CONFIG_SND_SOC_CS35L32=m -CONFIG_SND_SOC_CS35L33=m -CONFIG_SND_SOC_CS35L34=m -CONFIG_SND_SOC_CS35L35=m -CONFIG_SND_SOC_CS35L36=m -CONFIG_SND_SOC_CS42L42=m -CONFIG_SND_SOC_CS42L51=m -CONFIG_SND_SOC_CS42L51_I2C=m -CONFIG_SND_SOC_CS42L52=m -CONFIG_SND_SOC_CS42L56=m -CONFIG_SND_SOC_CS42L73=m -CONFIG_SND_SOC_CS4265=m -CONFIG_SND_SOC_CS4270=m -CONFIG_SND_SOC_CS4271=m -CONFIG_SND_SOC_CS4271_I2C=m -CONFIG_SND_SOC_CS4271_SPI=m -CONFIG_SND_SOC_CS42XX8=m -CONFIG_SND_SOC_CS42XX8_I2C=m -CONFIG_SND_SOC_CS43130=m -CONFIG_SND_SOC_CS4341=m -CONFIG_SND_SOC_CS4349=m -CONFIG_SND_SOC_CS53L30=m -CONFIG_SND_SOC_CX2072X=m -CONFIG_SND_SOC_DA7213=m -CONFIG_SND_SOC_DA7219=m -CONFIG_SND_SOC_DMIC=m -CONFIG_SND_SOC_HDMI_CODEC=m -CONFIG_SND_SOC_ES7134=m -CONFIG_SND_SOC_ES7241=m -CONFIG_SND_SOC_ES8316=m -CONFIG_SND_SOC_ES8328=m -CONFIG_SND_SOC_ES8328_I2C=m -CONFIG_SND_SOC_ES8328_SPI=m -CONFIG_SND_SOC_GTM601=m -CONFIG_SND_SOC_HDAC_HDMI=m -CONFIG_SND_SOC_HDAC_HDA=m -CONFIG_SND_SOC_INNO_RK3036=m -CONFIG_SND_SOC_MAX98088=m -CONFIG_SND_SOC_MAX98090=m -CONFIG_SND_SOC_MAX98357A=m -CONFIG_SND_SOC_MAX98504=m -CONFIG_SND_SOC_MAX9867=m -CONFIG_SND_SOC_MAX98927=m -CONFIG_SND_SOC_MAX98373=m -CONFIG_SND_SOC_MAX9860=m -CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m -CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m -CONFIG_SND_SOC_PCM1681=m -CONFIG_SND_SOC_PCM1789=m -CONFIG_SND_SOC_PCM1789_I2C=m -CONFIG_SND_SOC_PCM179X=m -CONFIG_SND_SOC_PCM179X_I2C=m -CONFIG_SND_SOC_PCM179X_SPI=m -CONFIG_SND_SOC_PCM186X=m -CONFIG_SND_SOC_PCM186X_I2C=m -CONFIG_SND_SOC_PCM186X_SPI=m -CONFIG_SND_SOC_PCM3060=m -CONFIG_SND_SOC_PCM3060_I2C=m -CONFIG_SND_SOC_PCM3060_SPI=m -CONFIG_SND_SOC_PCM3168A=m -CONFIG_SND_SOC_PCM3168A_I2C=m -CONFIG_SND_SOC_PCM3168A_SPI=m -CONFIG_SND_SOC_PCM512x=m -CONFIG_SND_SOC_PCM512x_I2C=m -CONFIG_SND_SOC_PCM512x_SPI=m -# CONFIG_SND_SOC_RK3328 is not set -CONFIG_SND_SOC_RL6231=m -CONFIG_SND_SOC_RL6347A=m -CONFIG_SND_SOC_RT286=m -CONFIG_SND_SOC_RT298=m -CONFIG_SND_SOC_RT5514=m -CONFIG_SND_SOC_RT5514_SPI=m -CONFIG_SND_SOC_RT5616=m -CONFIG_SND_SOC_RT5631=m -CONFIG_SND_SOC_RT5640=m -CONFIG_SND_SOC_RT5645=m -CONFIG_SND_SOC_RT5651=m -CONFIG_SND_SOC_RT5660=m -CONFIG_SND_SOC_RT5663=m -CONFIG_SND_SOC_RT5670=m -CONFIG_SND_SOC_RT5677=m -CONFIG_SND_SOC_RT5677_SPI=m -CONFIG_SND_SOC_RT5682=m -CONFIG_SND_SOC_SGTL5000=m -CONFIG_SND_SOC_SI476X=m -CONFIG_SND_SOC_SIGMADSP=m -CONFIG_SND_SOC_SIGMADSP_I2C=m -CONFIG_SND_SOC_SIGMADSP_REGMAP=m -CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m -CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m -CONFIG_SND_SOC_SPDIF=m -CONFIG_SND_SOC_SSM2305=m -CONFIG_SND_SOC_SSM2602=m -CONFIG_SND_SOC_SSM2602_SPI=m -CONFIG_SND_SOC_SSM2602_I2C=m -CONFIG_SND_SOC_SSM4567=m -CONFIG_SND_SOC_STA32X=m -CONFIG_SND_SOC_STA350=m -CONFIG_SND_SOC_STI_SAS=m -CONFIG_SND_SOC_TAS2552=m -CONFIG_SND_SOC_TAS2562=m -CONFIG_SND_SOC_TAS2770=m -CONFIG_SND_SOC_TAS5086=m -CONFIG_SND_SOC_TAS571X=m -CONFIG_SND_SOC_TAS5720=m -CONFIG_SND_SOC_TAS6424=m -CONFIG_SND_SOC_TDA7419=m -CONFIG_SND_SOC_TFA9879=m -CONFIG_SND_SOC_TLV320AIC23=m -CONFIG_SND_SOC_TLV320AIC23_I2C=m -CONFIG_SND_SOC_TLV320AIC23_SPI=m -CONFIG_SND_SOC_TLV320AIC31XX=m -CONFIG_SND_SOC_TLV320AIC32X4=m -CONFIG_SND_SOC_TLV320AIC32X4_I2C=m -CONFIG_SND_SOC_TLV320AIC32X4_SPI=m -CONFIG_SND_SOC_TLV320AIC3X=m -CONFIG_SND_SOC_TLV320ADCX140=m -CONFIG_SND_SOC_TS3A227E=m -CONFIG_SND_SOC_TSCS42XX=m -CONFIG_SND_SOC_TSCS454=m -CONFIG_SND_SOC_UDA1334=m -CONFIG_SND_SOC_WM8510=m -CONFIG_SND_SOC_WM8523=m -CONFIG_SND_SOC_WM8524=m -CONFIG_SND_SOC_WM8580=m -CONFIG_SND_SOC_WM8711=m -CONFIG_SND_SOC_WM8728=m -CONFIG_SND_SOC_WM8731=m -CONFIG_SND_SOC_WM8737=m -CONFIG_SND_SOC_WM8741=m -CONFIG_SND_SOC_WM8750=m -CONFIG_SND_SOC_WM8753=m -CONFIG_SND_SOC_WM8770=m -CONFIG_SND_SOC_WM8776=m -CONFIG_SND_SOC_WM8782=m -CONFIG_SND_SOC_WM8804=m -CONFIG_SND_SOC_WM8804_I2C=m -CONFIG_SND_SOC_WM8804_SPI=m -CONFIG_SND_SOC_WM8903=m -CONFIG_SND_SOC_WM8904=m -CONFIG_SND_SOC_WM8960=m -CONFIG_SND_SOC_WM8962=m -CONFIG_SND_SOC_WM8974=m -CONFIG_SND_SOC_WM8978=m -CONFIG_SND_SOC_WM8985=m -CONFIG_SND_SOC_ZX_AUD96P22=m -CONFIG_SND_SOC_MAX9759=m -CONFIG_SND_SOC_MT6351=m -CONFIG_SND_SOC_MT6358=m -CONFIG_SND_SOC_MT6660=m -CONFIG_SND_SOC_NAU8540=m -CONFIG_SND_SOC_NAU8810=m -CONFIG_SND_SOC_NAU8822=m -CONFIG_SND_SOC_NAU8824=m -CONFIG_SND_SOC_NAU8825=m -CONFIG_SND_SOC_TPA6130A2=m -# end of CODEC drivers - -CONFIG_SND_SIMPLE_CARD_UTILS=m -CONFIG_SND_SIMPLE_CARD=m -CONFIG_SND_X86=y -CONFIG_HDMI_LPE_AUDIO=m -CONFIG_SND_SYNTH_EMUX=m -CONFIG_SND_XEN_FRONTEND=m -CONFIG_AC97_BUS=m - -# -# HID support -# -CONFIG_HID=m -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=m -CONFIG_HID_GENERIC=m - -# -# Special HID drivers -# -CONFIG_HID_A4TECH=m -CONFIG_HID_ACCUTOUCH=m -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -CONFIG_HID_APPLEIR=m -CONFIG_HID_ASUS=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -CONFIG_HID_BIGBEN_FF=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_COUGAR=m -CONFIG_HID_MACALLY=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CMEDIA=m -CONFIG_HID_CP2112=m -CONFIG_HID_CREATIVE_SB0540=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -CONFIG_HID_ELAN=m -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -CONFIG_HID_GFRM=m -CONFIG_HID_GLORIOUS=m -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -CONFIG_HID_GOOGLE_HAMMER=m -CONFIG_HID_GT683R=m -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -CONFIG_HID_VIEWSONIC=m -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m -CONFIG_HID_ITE=m -CONFIG_HID_JABRA=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LCPOWER=m -CONFIG_HID_LED=m -CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MALTRON=m -CONFIG_HID_MAYFLASH=m -CONFIG_HID_REDRAGON=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -CONFIG_HID_NTI=m -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -CONFIG_HID_PICOLCD_LCD=y -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -CONFIG_HID_RETRODE=m -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -CONFIG_HID_STEAM=m -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_HYPERV_MOUSE=m -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -CONFIG_HID_UDRAW_PS3=m -CONFIG_HID_U2FZERO=m -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m -CONFIG_HID_ALPS=m -CONFIG_HID_MCP2221=m -# end of Special HID drivers - -# -# USB HID support -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -# end of USB HID Boot Protocol drivers -# end of USB HID support - -# -# I2C HID support -# -CONFIG_I2C_HID=m -# end of I2C HID support -# end of HID support - -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_USB_CONN_GPIO=m -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=y -CONFIG_USB_PCI=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_LEDS_TRIGGER_USBPORT=m -CONFIG_USB_AUTOSUSPEND_DELAY=2 -CONFIG_USB_MON=m - -# -# USB Host Controller Drivers -# -CONFIG_USB_C67X00_HCD=m -CONFIG_USB_XHCI_HCD=y -# CONFIG_USB_XHCI_DBGCAP is not set -CONFIG_USB_XHCI_PCI=y -CONFIG_USB_XHCI_PLATFORM=m -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=y -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_OXU210HP_HCD=m -CONFIG_USB_ISP116X_HCD=m -CONFIG_USB_FOTG210_HCD=m -CONFIG_USB_MAX3421_HCD=m -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_U132_HCD=m -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_HCD_ISO=y -CONFIG_USB_SL811_CS=m -CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_HCD_BCMA=m -CONFIG_USB_HCD_SSB=m -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USBIP_CORE=m -CONFIG_USBIP_VHCI_HCD=m -CONFIG_USBIP_VHCI_HC_PORTS=8 -CONFIG_USBIP_VHCI_NR_HCS=1 -CONFIG_USBIP_HOST=m -CONFIG_USBIP_VUDC=m -# CONFIG_USBIP_DEBUG is not set -CONFIG_USB_CDNS3=m -# CONFIG_USB_CDNS3_GADGET is not set -# CONFIG_USB_CDNS3_HOST is not set -CONFIG_USB_CDNS3_PCI_WRAP=m -CONFIG_USB_MUSB_HDRC=m -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y - -# -# Platform Glue Layer -# - -# -# MUSB DMA mode -# -CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_DWC3=m -CONFIG_USB_DWC3_ULPI=y -# CONFIG_USB_DWC3_HOST is not set -# CONFIG_USB_DWC3_GADGET is not set -CONFIG_USB_DWC3_DUAL_ROLE=y - -# -# Platform Glue Driver Support -# -CONFIG_USB_DWC3_PCI=m -CONFIG_USB_DWC3_HAPS=m -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -CONFIG_USB_DWC2_PCI=m -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_CHIPIDEA=m -CONFIG_USB_CHIPIDEA_PCI=m -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_ISP1760=m -CONFIG_USB_ISP1760_HCD=y -CONFIG_USB_ISP1761_UDC=y -# CONFIG_USB_ISP1760_HOST_ROLE is not set -# CONFIG_USB_ISP1760_GADGET_ROLE is not set -CONFIG_USB_ISP1760_DUAL_ROLE=y - -# -# USB port drivers -# -CONFIG_USB_USS720=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -CONFIG_USB_SERIAL_F8153X=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7715_PARPORT=y -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -CONFIG_USB_SERIAL_UPD78F0730=m -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_APPLE_MFI_FASTCHARGE=m -CONFIG_USB_SISUSBVGA=m -# CONFIG_USB_SISUSBVGA_CON is not set -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_USB_EHSET_TEST_FIXTURE=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m -CONFIG_USB_HUB_USB251XB=m -CONFIG_USB_HSIC_USB3503=m -CONFIG_USB_HSIC_USB4604=m -CONFIG_USB_LINK_LAYER_TEST=m -CONFIG_USB_CHAOSKEY=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_CXACRU=m -CONFIG_USB_UEAGLEATM=m -CONFIG_USB_XUSBATM=m - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=m -CONFIG_USB_GPIO_VBUS=m -CONFIG_TAHVO_USB=m -CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y -CONFIG_USB_ISP1301=m -# end of USB Physical Layer drivers - -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -# CONFIG_U_SERIAL_CONSOLE is not set - -# -# USB Peripheral Controller -# -CONFIG_USB_FOTG210_UDC=m -CONFIG_USB_GR_UDC=m -CONFIG_USB_R8A66597=m -CONFIG_USB_PXA27X=m -CONFIG_USB_MV_UDC=m -CONFIG_USB_MV_U3D=m -CONFIG_USB_SNP_CORE=m -# CONFIG_USB_M66592 is not set -CONFIG_USB_BDC_UDC=m - -# -# Platform Support -# -CONFIG_USB_BDC_PCI=m -CONFIG_USB_AMD5536UDC=m -CONFIG_USB_NET2272=m -CONFIG_USB_NET2272_DMA=y -CONFIG_USB_NET2280=m -CONFIG_USB_GOKU=m -CONFIG_USB_EG20T=m -CONFIG_USB_MAX3420_UDC=m -# CONFIG_USB_DUMMY_HCD is not set -# end of USB Peripheral Controller - -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_F_SS_LB=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_U_AUDIO=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_NCM=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_PHONET=m -CONFIG_USB_F_EEM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -CONFIG_USB_F_FS=m -CONFIG_USB_F_UAC1=m -CONFIG_USB_F_UAC2=m -CONFIG_USB_F_UVC=m -CONFIG_USB_F_MIDI=m -CONFIG_USB_F_HID=m -CONFIG_USB_F_PRINTER=m -CONFIG_USB_F_TCM=m -CONFIG_USB_CONFIGFS=m -CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_ACM=y -CONFIG_USB_CONFIGFS_OBEX=y -CONFIG_USB_CONFIGFS_NCM=y -CONFIG_USB_CONFIGFS_ECM=y -CONFIG_USB_CONFIGFS_ECM_SUBSET=y -CONFIG_USB_CONFIGFS_RNDIS=y -CONFIG_USB_CONFIGFS_EEM=y -CONFIG_USB_CONFIGFS_PHONET=y -CONFIG_USB_CONFIGFS_MASS_STORAGE=y -CONFIG_USB_CONFIGFS_F_LB_SS=y -CONFIG_USB_CONFIGFS_F_FS=y -CONFIG_USB_CONFIGFS_F_UAC1=y -# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set -CONFIG_USB_CONFIGFS_F_UAC2=y -CONFIG_USB_CONFIGFS_F_MIDI=y -CONFIG_USB_CONFIGFS_F_HID=y -CONFIG_USB_CONFIGFS_F_UVC=y -CONFIG_USB_CONFIGFS_F_PRINTER=y -# CONFIG_USB_CONFIGFS_F_TCM is not set - -# -# USB Gadget precomposed configurations -# -CONFIG_USB_ZERO=m -CONFIG_USB_AUDIO=m -CONFIG_GADGET_UAC1=y -# CONFIG_GADGET_UAC1_LEGACY is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_ETH_EEM=y -CONFIG_USB_G_NCM=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m -CONFIG_USB_FUNCTIONFS_ETH=y -CONFIG_USB_FUNCTIONFS_RNDIS=y -CONFIG_USB_FUNCTIONFS_GENERIC=y -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_GADGET_TARGET=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_USB_G_PRINTER=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_NOKIA=m -CONFIG_USB_G_ACM_MS=m -# CONFIG_USB_G_MULTI is not set -CONFIG_USB_G_HID=m -CONFIG_USB_G_DBGP=m -# CONFIG_USB_G_DBGP_PRINTK is not set -CONFIG_USB_G_DBGP_SERIAL=y -CONFIG_USB_G_WEBCAM=m -CONFIG_USB_RAW_GADGET=m -# end of USB Gadget precomposed configurations - -CONFIG_TYPEC=m -CONFIG_TYPEC_TCPM=m -CONFIG_TYPEC_TCPCI=m -CONFIG_TYPEC_RT1711H=m -CONFIG_TYPEC_FUSB302=m -CONFIG_TYPEC_UCSI=m -CONFIG_UCSI_CCG=m -CONFIG_UCSI_ACPI=m -CONFIG_TYPEC_HD3SS3220=m -CONFIG_TYPEC_TPS6598X=m - -# -# USB Type-C Multiplexer/DeMultiplexer Switch support -# -CONFIG_TYPEC_MUX_PI3USB30532=m -CONFIG_TYPEC_MUX_INTEL_PMC=m -# end of USB Type-C Multiplexer/DeMultiplexer Switch support - -# -# USB Type-C Alternate Mode drivers -# -CONFIG_TYPEC_DP_ALTMODE=m -CONFIG_TYPEC_NVIDIA_ALTMODE=m -# end of USB Type-C Alternate Mode drivers - -CONFIG_USB_ROLE_SWITCH=m -CONFIG_USB_ROLES_INTEL_XHCI=m -CONFIG_MMC=y -CONFIG_MMC_BLOCK=m -CONFIG_MMC_BLOCK_MINORS=8 -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=y -CONFIG_MMC_SDHCI_ACPI=m -CONFIG_MMC_SDHCI_PLTFM=m -CONFIG_MMC_SDHCI_F_SDH30=m -CONFIG_MMC_WBSD=m -CONFIG_MMC_ALCOR=m -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SPI=m -CONFIG_MMC_SDRICOH_CS=m -CONFIG_MMC_CB710=m -CONFIG_MMC_VIA_SDMMC=m -CONFIG_MMC_VUB300=m -CONFIG_MMC_USHC=m -CONFIG_MMC_USDHI6ROL0=m -CONFIG_MMC_REALTEK_PCI=m -CONFIG_MMC_REALTEK_USB=m -CONFIG_MMC_CQHCI=m -CONFIG_MMC_HSQ=m -CONFIG_MMC_TOSHIBA_PCI=m -CONFIG_MMC_MTK=m -CONFIG_MMC_SDHCI_XENON=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m -CONFIG_MS_BLOCK=m - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_MEMSTICK_R592=m -CONFIG_MEMSTICK_REALTEK_PCI=m -CONFIG_MEMSTICK_REALTEK_USB=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_CLASS_FLASH=m -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set - -# -# LED drivers -# -CONFIG_LEDS_88PM860X=m -CONFIG_LEDS_APU=m -CONFIG_LEDS_AS3645A=m -CONFIG_LEDS_LM3530=m -CONFIG_LEDS_LM3532=m -CONFIG_LEDS_LM3533=m -CONFIG_LEDS_LM3642=m -CONFIG_LEDS_LM3601X=m -CONFIG_LEDS_MT6323=m -CONFIG_LEDS_NET48XX=m -CONFIG_LEDS_WRAP=m -CONFIG_LEDS_PCA9532=m -CONFIG_LEDS_PCA9532_GPIO=y -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_LP3944=m -CONFIG_LEDS_LP3952=m -CONFIG_LEDS_LP55XX_COMMON=m -CONFIG_LEDS_LP5521=m -CONFIG_LEDS_LP5523=m -CONFIG_LEDS_LP5562=m -CONFIG_LEDS_LP8501=m -CONFIG_LEDS_LP8788=m -CONFIG_LEDS_CLEVO_MAIL=m -CONFIG_LEDS_PCA955X=m -# CONFIG_LEDS_PCA955X_GPIO is not set -CONFIG_LEDS_PCA963X=m -CONFIG_LEDS_WM831X_STATUS=m -CONFIG_LEDS_WM8350=m -CONFIG_LEDS_DA903X=m -CONFIG_LEDS_DA9052=m -CONFIG_LEDS_DAC124S085=m -CONFIG_LEDS_PWM=m -CONFIG_LEDS_REGULATOR=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_INTEL_SS4200=m -CONFIG_LEDS_ADP5520=m -CONFIG_LEDS_MC13783=m -CONFIG_LEDS_TCA6507=m -CONFIG_LEDS_TLC591XX=m -CONFIG_LEDS_MAX8997=m -CONFIG_LEDS_LM355x=m -CONFIG_LEDS_OT200=m -CONFIG_LEDS_MENF21BMC=m - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -CONFIG_LEDS_BLINKM=m -# CONFIG_LEDS_MLXCPLD is not set -# CONFIG_LEDS_MLXREG is not set -CONFIG_LEDS_USER=m -CONFIG_LEDS_NIC78BX=m -CONFIG_LEDS_TI_LMU_COMMON=m -CONFIG_LEDS_LM36274=m -CONFIG_LEDS_TPS6105X=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_ONESHOT=m -CONFIG_LEDS_TRIGGER_DISK=y -# CONFIG_LEDS_TRIGGER_MTD is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_ACTIVITY=m -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - -# -# iptables trigger is under Netfilter config (LED target) -# -CONFIG_LEDS_TRIGGER_TRANSIENT=m -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LEDS_TRIGGER_PANIC=y -CONFIG_LEDS_TRIGGER_NETDEV=m -CONFIG_LEDS_TRIGGER_PATTERN=m -CONFIG_LEDS_TRIGGER_AUDIO=m -# CONFIG_ACCESSIBILITY is not set -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ON_DEMAND_PAGING=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_CXGB4=m -CONFIG_INFINIBAND_I40IW=m -CONFIG_MLX4_INFINIBAND=m -CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_OCRDMA=m -CONFIG_INFINIBAND_VMWARE_PVRDMA=m -CONFIG_INFINIBAND_USNIC=m -CONFIG_RDMA_RXE=m -CONFIG_RDMA_SIW=m -CONFIG_INFINIBAND_IPOIB=m -CONFIG_INFINIBAND_IPOIB_CM=y -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_SRPT=m -CONFIG_INFINIBAND_ISER=m -CONFIG_INFINIBAND_ISERT=m -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EDAC=y -# CONFIG_EDAC_LEGACY_SYSFS is not set -# CONFIG_EDAC_DEBUG is not set -CONFIG_EDAC_DECODE_MCE=m -CONFIG_EDAC_GHES=y -CONFIG_EDAC_AMD64=m -# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set -CONFIG_EDAC_AMD76X=m -CONFIG_EDAC_E7XXX=m -CONFIG_EDAC_E752X=m -CONFIG_EDAC_I82875P=m -CONFIG_EDAC_I82975X=m -CONFIG_EDAC_I3000=m -CONFIG_EDAC_I3200=m -CONFIG_EDAC_IE31200=m -CONFIG_EDAC_X38=m -CONFIG_EDAC_I5400=m -CONFIG_EDAC_I7CORE=m -CONFIG_EDAC_I82860=m -CONFIG_EDAC_R82600=m -CONFIG_EDAC_I5000=m -CONFIG_EDAC_I5100=m -CONFIG_EDAC_I7300=m -CONFIG_RTC_LIB=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set -CONFIG_RTC_NVMEM=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -CONFIG_RTC_DRV_88PM860X=m -CONFIG_RTC_DRV_88PM80X=m -CONFIG_RTC_DRV_ABB5ZES3=m -CONFIG_RTC_DRV_ABEOZ9=m -CONFIG_RTC_DRV_ABX80X=m -CONFIG_RTC_DRV_DS1307=m -# CONFIG_RTC_DRV_DS1307_CENTURY is not set -CONFIG_RTC_DRV_DS1374=m -CONFIG_RTC_DRV_DS1374_WDT=y -CONFIG_RTC_DRV_DS1672=m -CONFIG_RTC_DRV_LP8788=m -CONFIG_RTC_DRV_MAX6900=m -CONFIG_RTC_DRV_MAX8907=m -CONFIG_RTC_DRV_MAX8925=m -CONFIG_RTC_DRV_MAX8998=m -CONFIG_RTC_DRV_MAX8997=m -CONFIG_RTC_DRV_RS5C372=m -CONFIG_RTC_DRV_ISL1208=m -CONFIG_RTC_DRV_ISL12022=m -CONFIG_RTC_DRV_X1205=m -CONFIG_RTC_DRV_PCF8523=m -CONFIG_RTC_DRV_PCF85063=m -CONFIG_RTC_DRV_PCF85363=m -CONFIG_RTC_DRV_PCF8563=m -CONFIG_RTC_DRV_PCF8583=m -CONFIG_RTC_DRV_M41T80=m -CONFIG_RTC_DRV_M41T80_WDT=y -CONFIG_RTC_DRV_BQ32K=m -CONFIG_RTC_DRV_PALMAS=m -CONFIG_RTC_DRV_TPS6586X=m -CONFIG_RTC_DRV_TPS65910=m -CONFIG_RTC_DRV_TPS80031=m -CONFIG_RTC_DRV_RC5T583=m -CONFIG_RTC_DRV_S35390A=m -CONFIG_RTC_DRV_FM3130=m -CONFIG_RTC_DRV_RX8010=m -CONFIG_RTC_DRV_RX8581=m -CONFIG_RTC_DRV_RX8025=m -CONFIG_RTC_DRV_EM3027=m -CONFIG_RTC_DRV_RV3028=m -CONFIG_RTC_DRV_RV8803=m -CONFIG_RTC_DRV_S5M=m -CONFIG_RTC_DRV_SD3078=m - -# -# SPI RTC drivers -# -CONFIG_RTC_DRV_M41T93=m -CONFIG_RTC_DRV_M41T94=m -CONFIG_RTC_DRV_DS1302=m -CONFIG_RTC_DRV_DS1305=m -CONFIG_RTC_DRV_DS1343=m -CONFIG_RTC_DRV_DS1347=m -CONFIG_RTC_DRV_DS1390=m -CONFIG_RTC_DRV_MAX6916=m -CONFIG_RTC_DRV_R9701=m -CONFIG_RTC_DRV_RX4581=m -CONFIG_RTC_DRV_RX6110=m -CONFIG_RTC_DRV_RS5C348=m -CONFIG_RTC_DRV_MAX6902=m -CONFIG_RTC_DRV_PCF2123=m -CONFIG_RTC_DRV_MCP795=m -CONFIG_RTC_I2C_AND_SPI=y - -# -# SPI and I2C RTC drivers -# -CONFIG_RTC_DRV_DS3232=m -CONFIG_RTC_DRV_DS3232_HWMON=y -CONFIG_RTC_DRV_PCF2127=m -CONFIG_RTC_DRV_RV3029C2=m -CONFIG_RTC_DRV_RV3029_HWMON=y - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -CONFIG_RTC_DRV_VRTC=m -CONFIG_RTC_DRV_DS1286=m -CONFIG_RTC_DRV_DS1511=m -CONFIG_RTC_DRV_DS1553=m -CONFIG_RTC_DRV_DS1685_FAMILY=m -CONFIG_RTC_DRV_DS1685=y -# CONFIG_RTC_DRV_DS1689 is not set -# CONFIG_RTC_DRV_DS17285 is not set -# CONFIG_RTC_DRV_DS17485 is not set -# CONFIG_RTC_DRV_DS17885 is not set -CONFIG_RTC_DRV_DS1742=m -CONFIG_RTC_DRV_DS2404=m -CONFIG_RTC_DRV_DA9052=m -CONFIG_RTC_DRV_DA9055=m -CONFIG_RTC_DRV_DA9063=m -CONFIG_RTC_DRV_STK17TA8=m -CONFIG_RTC_DRV_M48T86=m -CONFIG_RTC_DRV_M48T35=m -CONFIG_RTC_DRV_M48T59=m -CONFIG_RTC_DRV_MSM6242=m -CONFIG_RTC_DRV_BQ4802=m -CONFIG_RTC_DRV_RP5C01=m -CONFIG_RTC_DRV_V3020=m -CONFIG_RTC_DRV_WM831X=m -CONFIG_RTC_DRV_WM8350=m -CONFIG_RTC_DRV_PCF50633=m -CONFIG_RTC_DRV_AB3100=m -CONFIG_RTC_DRV_CROS_EC=m - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_FTRTC010=m -CONFIG_RTC_DRV_PCAP=m -CONFIG_RTC_DRV_MC13XXX=m -CONFIG_RTC_DRV_MT6397=m - -# -# HID Sensor RTC drivers -# -CONFIG_RTC_DRV_HID_SENSOR_TIME=m -CONFIG_RTC_DRV_WILCO_EC=m -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=m -CONFIG_DMA_ACPI=y -CONFIG_ALTERA_MSGDMA=m -CONFIG_INTEL_IDMA64=m -CONFIG_PCH_DMA=m -CONFIG_PLX_DMA=m -CONFIG_TIMB_DMA=m -CONFIG_QCOM_HIDMA_MGMT=m -CONFIG_QCOM_HIDMA=m -CONFIG_DW_DMAC_CORE=m -CONFIG_DW_DMAC=m -CONFIG_DW_DMAC_PCI=m -CONFIG_DW_EDMA=m -CONFIG_DW_EDMA_PCIE=m -CONFIG_HSU_DMA=m -CONFIG_HSU_DMA_PCI=m -CONFIG_SF_PDMA=m - -# -# DMA Clients -# -CONFIG_ASYNC_TX_DMA=y -# CONFIG_DMATEST is not set - -# -# DMABUF options -# -CONFIG_SYNC_FILE=y -# CONFIG_SW_SYNC is not set -# CONFIG_UDMABUF is not set -# CONFIG_DMABUF_MOVE_NOTIFY is not set -# CONFIG_DMABUF_SELFTESTS is not set -# CONFIG_DMABUF_HEAPS is not set -# end of DMABUF options - -CONFIG_AUXDISPLAY=y -CONFIG_HD44780=m -CONFIG_KS0108=m -CONFIG_KS0108_PORT=0x378 -CONFIG_KS0108_DELAY=2 -CONFIG_CFAG12864B=m -CONFIG_CFAG12864B_RATE=20 -CONFIG_IMG_ASCII_LCD=m -CONFIG_PARPORT_PANEL=m -CONFIG_PANEL_PARPORT=0 -CONFIG_PANEL_PROFILE=5 -# CONFIG_PANEL_CHANGE_MESSAGE is not set -# CONFIG_CHARLCD_BL_OFF is not set -# CONFIG_CHARLCD_BL_ON is not set -CONFIG_CHARLCD_BL_FLASH=y -CONFIG_PANEL=m -CONFIG_CHARLCD=m -CONFIG_UIO=m -CONFIG_UIO_CIF=m -CONFIG_UIO_PDRV_GENIRQ=m -CONFIG_UIO_DMEM_GENIRQ=m -CONFIG_UIO_AEC=m -CONFIG_UIO_SERCOS3=m -CONFIG_UIO_PCI_GENERIC=m -CONFIG_UIO_NETX=m -CONFIG_UIO_PRUSS=m -CONFIG_UIO_MF624=m -CONFIG_UIO_HV_GENERIC=m -CONFIG_VFIO_IOMMU_TYPE1=m -CONFIG_VFIO_VIRQFD=m -CONFIG_VFIO=m -CONFIG_VFIO_NOIOMMU=y -CONFIG_VFIO_PCI=m -CONFIG_VFIO_PCI_VGA=y -CONFIG_VFIO_PCI_MMAP=y -CONFIG_VFIO_PCI_INTX=y -CONFIG_VFIO_PCI_IGD=y -CONFIG_VFIO_MDEV=m -CONFIG_VFIO_MDEV_DEVICE=m -CONFIG_IRQ_BYPASS_MANAGER=m -CONFIG_VIRT_DRIVERS=y -CONFIG_VBOXGUEST=m -CONFIG_VIRTIO=y -CONFIG_VIRTIO_MENU=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_VDPA=m -CONFIG_VIRTIO_PMEM=m -CONFIG_VIRTIO_BALLOON=y -CONFIG_VIRTIO_INPUT=m -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y -CONFIG_VDPA=m -# CONFIG_VDPA_SIM is not set -CONFIG_IFCVF=m -CONFIG_VHOST_IOTLB=m -CONFIG_VHOST_RING=m -CONFIG_VHOST_DPN=y -CONFIG_VHOST=m -CONFIG_VHOST_MENU=y -CONFIG_VHOST_NET=m -CONFIG_VHOST_SCSI=m -CONFIG_VHOST_VSOCK=m -CONFIG_VHOST_VDPA=m -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set - -# -# Microsoft Hyper-V guest support -# -CONFIG_HYPERV=m -CONFIG_HYPERV_TIMER=y -CONFIG_HYPERV_UTILS=m -CONFIG_HYPERV_BALLOON=m -# end of Microsoft Hyper-V guest support - -# -# Xen driver support -# -CONFIG_XEN_BALLOON=y -CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y -CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT=4 -CONFIG_XEN_SCRUB_PAGES_DEFAULT=y -CONFIG_XEN_DEV_EVTCHN=m -CONFIG_XEN_BACKEND=y -CONFIG_XENFS=m -CONFIG_XEN_COMPAT_XENFS=y -CONFIG_XEN_SYS_HYPERVISOR=y -CONFIG_XEN_XENBUS_FRONTEND=y -CONFIG_XEN_GNTDEV=m -CONFIG_XEN_GRANT_DEV_ALLOC=m -# CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_SWIOTLB_XEN=y -CONFIG_XEN_PCIDEV_BACKEND=m -CONFIG_XEN_PVCALLS_FRONTEND=m -# CONFIG_XEN_PVCALLS_BACKEND is not set -CONFIG_XEN_SCSI_BACKEND=m -CONFIG_XEN_PRIVCMD=m -CONFIG_XEN_ACPI_PROCESSOR=y -CONFIG_XEN_MCE_LOG=y -CONFIG_XEN_HAVE_PVMMU=y -CONFIG_XEN_AUTO_XLATE=y -CONFIG_XEN_ACPI=y -CONFIG_XEN_SYMS=y -CONFIG_XEN_HAVE_VPMU=y -CONFIG_XEN_FRONT_PGDIR_SHBUF=m -# end of Xen driver support - -# CONFIG_GREYBUS is not set -CONFIG_STAGING=y -CONFIG_PRISM2_USB=m -CONFIG_COMEDI=m -# CONFIG_COMEDI_DEBUG is not set -CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048 -CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480 -CONFIG_COMEDI_MISC_DRIVERS=y -CONFIG_COMEDI_BOND=m -CONFIG_COMEDI_TEST=m -CONFIG_COMEDI_PARPORT=m -CONFIG_COMEDI_SSV_DNP=m -CONFIG_COMEDI_ISA_DRIVERS=y -CONFIG_COMEDI_PCL711=m -CONFIG_COMEDI_PCL724=m -CONFIG_COMEDI_PCL726=m -CONFIG_COMEDI_PCL730=m -CONFIG_COMEDI_PCL812=m -CONFIG_COMEDI_PCL816=m -CONFIG_COMEDI_PCL818=m -CONFIG_COMEDI_PCM3724=m -CONFIG_COMEDI_AMPLC_DIO200_ISA=m -CONFIG_COMEDI_AMPLC_PC236_ISA=m -CONFIG_COMEDI_AMPLC_PC263_ISA=m -CONFIG_COMEDI_RTI800=m -CONFIG_COMEDI_RTI802=m -CONFIG_COMEDI_DAC02=m -CONFIG_COMEDI_DAS16M1=m -CONFIG_COMEDI_DAS08_ISA=m -CONFIG_COMEDI_DAS16=m -CONFIG_COMEDI_DAS800=m -CONFIG_COMEDI_DAS1800=m -CONFIG_COMEDI_DAS6402=m -CONFIG_COMEDI_DT2801=m -CONFIG_COMEDI_DT2811=m -CONFIG_COMEDI_DT2814=m -CONFIG_COMEDI_DT2815=m -CONFIG_COMEDI_DT2817=m -CONFIG_COMEDI_DT282X=m -CONFIG_COMEDI_DMM32AT=m -CONFIG_COMEDI_FL512=m -CONFIG_COMEDI_AIO_AIO12_8=m -CONFIG_COMEDI_AIO_IIRO_16=m -CONFIG_COMEDI_II_PCI20KC=m -CONFIG_COMEDI_C6XDIGIO=m -CONFIG_COMEDI_MPC624=m -CONFIG_COMEDI_ADQ12B=m -CONFIG_COMEDI_NI_AT_A2150=m -CONFIG_COMEDI_NI_AT_AO=m -CONFIG_COMEDI_NI_ATMIO=m -CONFIG_COMEDI_NI_ATMIO16D=m -CONFIG_COMEDI_NI_LABPC_ISA=m -CONFIG_COMEDI_PCMAD=m -CONFIG_COMEDI_PCMDA12=m -CONFIG_COMEDI_PCMMIO=m -CONFIG_COMEDI_PCMUIO=m -CONFIG_COMEDI_MULTIQ3=m -CONFIG_COMEDI_S526=m -CONFIG_COMEDI_PCI_DRIVERS=m -CONFIG_COMEDI_8255_PCI=m -CONFIG_COMEDI_ADDI_WATCHDOG=m -CONFIG_COMEDI_ADDI_APCI_1032=m -CONFIG_COMEDI_ADDI_APCI_1500=m -CONFIG_COMEDI_ADDI_APCI_1516=m -CONFIG_COMEDI_ADDI_APCI_1564=m -CONFIG_COMEDI_ADDI_APCI_16XX=m -CONFIG_COMEDI_ADDI_APCI_2032=m -CONFIG_COMEDI_ADDI_APCI_2200=m -CONFIG_COMEDI_ADDI_APCI_3120=m -CONFIG_COMEDI_ADDI_APCI_3501=m -CONFIG_COMEDI_ADDI_APCI_3XXX=m -CONFIG_COMEDI_ADL_PCI6208=m -CONFIG_COMEDI_ADL_PCI7X3X=m -CONFIG_COMEDI_ADL_PCI8164=m -CONFIG_COMEDI_ADL_PCI9111=m -CONFIG_COMEDI_ADL_PCI9118=m -CONFIG_COMEDI_ADV_PCI1710=m -CONFIG_COMEDI_ADV_PCI1720=m -CONFIG_COMEDI_ADV_PCI1723=m -CONFIG_COMEDI_ADV_PCI1724=m -CONFIG_COMEDI_ADV_PCI1760=m -CONFIG_COMEDI_ADV_PCI_DIO=m -CONFIG_COMEDI_AMPLC_DIO200_PCI=m -CONFIG_COMEDI_AMPLC_PC236_PCI=m -CONFIG_COMEDI_AMPLC_PC263_PCI=m -CONFIG_COMEDI_AMPLC_PCI224=m -CONFIG_COMEDI_AMPLC_PCI230=m -CONFIG_COMEDI_CONTEC_PCI_DIO=m -CONFIG_COMEDI_DAS08_PCI=m -CONFIG_COMEDI_DT3000=m -CONFIG_COMEDI_DYNA_PCI10XX=m -CONFIG_COMEDI_GSC_HPDI=m -CONFIG_COMEDI_MF6X4=m -CONFIG_COMEDI_ICP_MULTI=m -CONFIG_COMEDI_DAQBOARD2000=m -CONFIG_COMEDI_JR3_PCI=m -CONFIG_COMEDI_KE_COUNTER=m -CONFIG_COMEDI_CB_PCIDAS64=m -CONFIG_COMEDI_CB_PCIDAS=m -CONFIG_COMEDI_CB_PCIDDA=m -CONFIG_COMEDI_CB_PCIMDAS=m -CONFIG_COMEDI_CB_PCIMDDA=m -CONFIG_COMEDI_ME4000=m -CONFIG_COMEDI_ME_DAQ=m -CONFIG_COMEDI_NI_6527=m -CONFIG_COMEDI_NI_65XX=m -CONFIG_COMEDI_NI_660X=m -CONFIG_COMEDI_NI_670X=m -CONFIG_COMEDI_NI_LABPC_PCI=m -CONFIG_COMEDI_NI_PCIDIO=m -CONFIG_COMEDI_NI_PCIMIO=m -CONFIG_COMEDI_RTD520=m -CONFIG_COMEDI_S626=m -CONFIG_COMEDI_MITE=m -CONFIG_COMEDI_NI_TIOCMD=m -CONFIG_COMEDI_PCMCIA_DRIVERS=m -CONFIG_COMEDI_CB_DAS16_CS=m -CONFIG_COMEDI_DAS08_CS=m -CONFIG_COMEDI_NI_DAQ_700_CS=m -CONFIG_COMEDI_NI_DAQ_DIO24_CS=m -CONFIG_COMEDI_NI_LABPC_CS=m -CONFIG_COMEDI_NI_MIO_CS=m -CONFIG_COMEDI_QUATECH_DAQP_CS=m -CONFIG_COMEDI_USB_DRIVERS=m -CONFIG_COMEDI_DT9812=m -CONFIG_COMEDI_NI_USB6501=m -CONFIG_COMEDI_USBDUX=m -CONFIG_COMEDI_USBDUXFAST=m -CONFIG_COMEDI_USBDUXSIGMA=m -CONFIG_COMEDI_VMK80XX=m -CONFIG_COMEDI_8254=m -CONFIG_COMEDI_8255=m -CONFIG_COMEDI_8255_SA=m -CONFIG_COMEDI_KCOMEDILIB=m -CONFIG_COMEDI_AMPLC_DIO200=m -CONFIG_COMEDI_AMPLC_PC236=m -CONFIG_COMEDI_DAS08=m -CONFIG_COMEDI_ISADMA=m -CONFIG_COMEDI_NI_LABPC=m -CONFIG_COMEDI_NI_LABPC_ISADMA=m -CONFIG_COMEDI_NI_TIO=m -CONFIG_COMEDI_NI_ROUTING=m -CONFIG_RTL8192U=m -CONFIG_RTLLIB=m -CONFIG_RTLLIB_CRYPTO_CCMP=m -CONFIG_RTLLIB_CRYPTO_TKIP=m -CONFIG_RTLLIB_CRYPTO_WEP=m -CONFIG_RTL8192E=m -CONFIG_RTL8723BS=m -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -CONFIG_RTS5208=m -CONFIG_VT6655=m -CONFIG_VT6656=m - -# -# IIO staging drivers -# - -# -# Accelerometers -# -CONFIG_ADIS16203=m -CONFIG_ADIS16240=m -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD7816=m -CONFIG_AD7280=m -# end of Analog to digital converters - -# -# Analog digital bi-direction converters -# -CONFIG_ADT7316=m -CONFIG_ADT7316_SPI=m -CONFIG_ADT7316_I2C=m -# end of Analog digital bi-direction converters - -# -# Capacitance to digital converters -# -CONFIG_AD7150=m -CONFIG_AD7746=m -# end of Capacitance to digital converters - -# -# Direct Digital Synthesis -# -CONFIG_AD9832=m -CONFIG_AD9834=m -# end of Direct Digital Synthesis - -# -# Network Analyzer, Impedance Converters -# -CONFIG_AD5933=m -# end of Network Analyzer, Impedance Converters - -# -# Active energy metering IC -# -CONFIG_ADE7854=m -CONFIG_ADE7854_I2C=m -CONFIG_ADE7854_SPI=m -# end of Active energy metering IC - -# -# Resolver to digital converters -# -CONFIG_AD2S1210=m -# end of Resolver to digital converters -# end of IIO staging drivers - -CONFIG_FB_SM750=m - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_ACNTPC=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_DECPC=m -CONFIG_SPEAKUP_SYNTH_DTLK=m -CONFIG_SPEAKUP_SYNTH_KEYPC=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -CONFIG_SPEAKUP_SYNTH_DUMMY=m -# end of Speakup console speech - -CONFIG_STAGING_MEDIA=y -# CONFIG_VIDEO_IPU3_IMGU is not set - -# -# soc_camera sensor drivers -# -CONFIG_VIDEO_USBVISION=m - -# -# Android -# -# end of Android - -CONFIG_LTE_GDM724X=m -CONFIG_FIREWIRE_SERIAL=m -CONFIG_FWTTY_MAX_TOTAL_PORTS=64 -CONFIG_FWTTY_MAX_CARD_PORTS=32 -CONFIG_GS_FPGABOOT=m -# CONFIG_UNISYSSPAR is not set -CONFIG_FB_TFT=m -CONFIG_FB_TFT_AGM1264K_FL=m -CONFIG_FB_TFT_BD663474=m -CONFIG_FB_TFT_HX8340BN=m -CONFIG_FB_TFT_HX8347D=m -CONFIG_FB_TFT_HX8353D=m -CONFIG_FB_TFT_HX8357D=m -CONFIG_FB_TFT_ILI9163=m -CONFIG_FB_TFT_ILI9320=m -CONFIG_FB_TFT_ILI9325=m -CONFIG_FB_TFT_ILI9340=m -CONFIG_FB_TFT_ILI9341=m -CONFIG_FB_TFT_ILI9481=m -CONFIG_FB_TFT_ILI9486=m -CONFIG_FB_TFT_PCD8544=m -CONFIG_FB_TFT_RA8875=m -CONFIG_FB_TFT_S6D02A1=m -CONFIG_FB_TFT_S6D1121=m -CONFIG_FB_TFT_SEPS525=m -CONFIG_FB_TFT_SH1106=m -CONFIG_FB_TFT_SSD1289=m -CONFIG_FB_TFT_SSD1305=m -CONFIG_FB_TFT_SSD1306=m -CONFIG_FB_TFT_SSD1331=m -CONFIG_FB_TFT_SSD1351=m -CONFIG_FB_TFT_ST7735R=m -CONFIG_FB_TFT_ST7789V=m -CONFIG_FB_TFT_TINYLCD=m -CONFIG_FB_TFT_TLS8204=m -CONFIG_FB_TFT_UC1611=m -CONFIG_FB_TFT_UC1701=m -CONFIG_FB_TFT_UPD161704=m -CONFIG_FB_TFT_WATTEROTT=m -CONFIG_WILC1000=m -CONFIG_WILC1000_SDIO=m -CONFIG_WILC1000_SPI=m -# CONFIG_WILC1000_HW_OOB_INTR is not set -CONFIG_MOST_COMPONENTS=m -CONFIG_MOST_CDEV=m -CONFIG_MOST_NET=m -CONFIG_MOST_SOUND=m -CONFIG_MOST_VIDEO=m -CONFIG_MOST_I2C=m -CONFIG_MOST_USB=m -CONFIG_KS7010=m -# CONFIG_PI433 is not set - -# -# Gasket devices -# -# end of Gasket devices - -CONFIG_FIELDBUS_DEV=m -# CONFIG_KPC2000 is not set -CONFIG_QLGE=m -CONFIG_WFX=m -CONFIG_X86_PLATFORM_DEVICES=y -CONFIG_ACPI_WMI=m -CONFIG_WMI_BMOF=m -CONFIG_ALIENWARE_WMI=m -# CONFIG_HUAWEI_WMI is not set -CONFIG_INTEL_WMI_THUNDERBOLT=m -CONFIG_MXM_WMI=m -CONFIG_PEAQ_WMI=m -CONFIG_XIAOMI_WMI=m -CONFIG_ACERHDF=m -CONFIG_ACER_WIRELESS=m -CONFIG_ACER_WMI=m -CONFIG_APPLE_GMUX=m -CONFIG_ASUS_LAPTOP=m -CONFIG_ASUS_WIRELESS=m -CONFIG_ASUS_WMI=m -CONFIG_ASUS_NB_WMI=m -CONFIG_EEEPC_LAPTOP=m -CONFIG_EEEPC_WMI=m -CONFIG_DCDBAS=m -CONFIG_DELL_SMBIOS=m -CONFIG_DELL_SMBIOS_WMI=y -CONFIG_DELL_SMBIOS_SMM=y -CONFIG_DELL_LAPTOP=m -CONFIG_DELL_RBTN=m -CONFIG_DELL_RBU=m -CONFIG_DELL_SMO8800=m -CONFIG_DELL_WMI=m -CONFIG_DELL_WMI_DESCRIPTOR=m -CONFIG_DELL_WMI_AIO=m -CONFIG_DELL_WMI_LED=m -CONFIG_AMILO_RFKILL=m -CONFIG_FUJITSU_LAPTOP=m -CONFIG_FUJITSU_TABLET=m -# CONFIG_GPD_POCKET_FAN is not set -CONFIG_HP_ACCEL=m -CONFIG_HP_WIRELESS=m -CONFIG_HP_WMI=m -CONFIG_TC1100_WMI=m -CONFIG_IBM_RTL=m -CONFIG_IDEAPAD_LAPTOP=m -CONFIG_SENSORS_HDAPS=m -CONFIG_THINKPAD_ACPI=m -CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y -CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y -# CONFIG_THINKPAD_ACPI_DEBUG is not set -# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set -CONFIG_THINKPAD_ACPI_VIDEO=y -CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y -CONFIG_INTEL_ATOMISP2_PM=m -CONFIG_INTEL_CHT_INT33FE=m -CONFIG_INTEL_HID_EVENT=m -CONFIG_INTEL_INT0002_VGPIO=m -CONFIG_INTEL_MENLOW=m -CONFIG_INTEL_OAKTRAIL=m -CONFIG_INTEL_VBTN=m -CONFIG_SURFACE3_WMI=m -CONFIG_SURFACE_3_BUTTON=m -CONFIG_SURFACE_3_POWER_OPREGION=m -CONFIG_SURFACE_PRO3_BUTTON=m -CONFIG_MSI_LAPTOP=m -CONFIG_MSI_WMI=m -CONFIG_PCENGINES_APU2=m -CONFIG_SAMSUNG_LAPTOP=m -CONFIG_SAMSUNG_Q10=m -CONFIG_ACPI_TOSHIBA=m -CONFIG_TOSHIBA_BT_RFKILL=m -CONFIG_TOSHIBA_HAPS=m -CONFIG_TOSHIBA_WMI=m -CONFIG_ACPI_CMPC=m -CONFIG_COMPAL_LAPTOP=m -CONFIG_LG_LAPTOP=m -CONFIG_PANASONIC_LAPTOP=m -CONFIG_SONY_LAPTOP=m -CONFIG_SONYPI_COMPAT=y -CONFIG_SYSTEM76_ACPI=m -CONFIG_TOPSTAR_LAPTOP=m -CONFIG_I2C_MULTI_INSTANTIATE=m -# CONFIG_MLX_PLATFORM is not set -# CONFIG_TOUCHSCREEN_DMI is not set -CONFIG_INTEL_IPS=m -CONFIG_INTEL_RST=m -CONFIG_INTEL_SMARTCONNECT=m -CONFIG_INTEL_BXTWC_PMIC_TMU=m -CONFIG_INTEL_CHTDC_TI_PWRBTN=m -CONFIG_INTEL_MFLD_THERMAL=m -CONFIG_INTEL_MID_POWER_BUTTON=m -CONFIG_INTEL_MRFLD_PWRBTN=m -CONFIG_INTEL_PMC_CORE=y -CONFIG_INTEL_PMC_IPC=m -CONFIG_INTEL_PUNIT_IPC=m -CONFIG_INTEL_SCU_IPC=y -CONFIG_INTEL_SCU_IPC_UTIL=m -CONFIG_PMC_ATOM=y -CONFIG_MFD_CROS_EC=m -CONFIG_CHROME_PLATFORMS=y -CONFIG_CHROMEOS_LAPTOP=m -CONFIG_CHROMEOS_PSTORE=m -CONFIG_CHROMEOS_TBMC=m -CONFIG_CROS_EC=m -CONFIG_CROS_EC_I2C=m -CONFIG_CROS_EC_SPI=m -CONFIG_CROS_EC_LPC=m -CONFIG_CROS_EC_PROTO=y -CONFIG_CROS_KBD_LED_BACKLIGHT=m -CONFIG_CROS_EC_CHARDEV=m -CONFIG_CROS_EC_LIGHTBAR=m -CONFIG_CROS_EC_DEBUGFS=m -CONFIG_CROS_EC_SENSORHUB=m -CONFIG_CROS_EC_SYSFS=m -CONFIG_CROS_EC_TYPEC=m -CONFIG_CROS_USBPD_LOGGER=m -CONFIG_CROS_USBPD_NOTIFY=m -CONFIG_WILCO_EC=m -# CONFIG_WILCO_EC_DEBUGFS is not set -CONFIG_WILCO_EC_EVENTS=m -CONFIG_WILCO_EC_TELEMETRY=m -# CONFIG_MELLANOX_PLATFORM is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -CONFIG_COMMON_CLK_WM831X=m -CONFIG_COMMON_CLK_MAX9485=m -CONFIG_COMMON_CLK_SI5341=m -CONFIG_COMMON_CLK_SI5351=m -CONFIG_COMMON_CLK_SI544=m -CONFIG_COMMON_CLK_CDCE706=m -CONFIG_COMMON_CLK_CS2000_CP=m -CONFIG_COMMON_CLK_S2MPS11=m -CONFIG_CLK_TWL6040=m -CONFIG_COMMON_CLK_PALMAS=m -CONFIG_COMMON_CLK_PWM=m -# end of Common Clock Framework - -# CONFIG_HWSPINLOCK is not set - -# -# Clock Source drivers -# -CONFIG_CLKSRC_I8253=y -CONFIG_CLKEVT_I8253=y -CONFIG_I8253_LOCK=y -CONFIG_CLKBLD_I8253=y -CONFIG_DW_APB_TIMER=y -# end of Clock Source drivers - -CONFIG_MAILBOX=y -CONFIG_PCC=y -CONFIG_ALTERA_MBOX=m -CONFIG_IOMMU_IOVA=y -CONFIG_IOASID=y -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -# end of Generic IOMMU Pagetable Support - -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_DMAR_TABLE=y -CONFIG_INTEL_IOMMU=y -# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set -CONFIG_INTEL_IOMMU_FLOPPY_WA=y -# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set -CONFIG_HYPERV_IOMMU=y - -# -# Remoteproc drivers -# -# CONFIG_REMOTEPROC is not set -# end of Remoteproc drivers - -# -# Rpmsg drivers -# -CONFIG_RPMSG=m -# CONFIG_RPMSG_CHAR is not set -CONFIG_RPMSG_QCOM_GLINK_NATIVE=m -CONFIG_RPMSG_QCOM_GLINK_RPM=m -CONFIG_RPMSG_VIRTIO=m -# end of Rpmsg drivers - -# CONFIG_SOUNDWIRE is not set - -# -# SOC (System On Chip) specific Drivers -# - -# -# Amlogic SoC drivers -# -# end of Amlogic SoC drivers - -# -# Aspeed SoC drivers -# -# end of Aspeed SoC drivers - -# -# Broadcom SoC drivers -# -# end of Broadcom SoC drivers - -# -# NXP/Freescale QorIQ SoC drivers -# -# end of NXP/Freescale QorIQ SoC drivers - -# -# i.MX SoC drivers -# -# end of i.MX SoC drivers - -# -# Qualcomm SoC drivers -# -# end of Qualcomm SoC drivers - -CONFIG_SOC_TI=y - -# -# Xilinx SoC drivers -# -# CONFIG_XILINX_VCU is not set -# end of Xilinx SoC drivers -# end of SOC (System On Chip) specific Drivers - -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -CONFIG_DEVFREQ_GOV_PERFORMANCE=y -CONFIG_DEVFREQ_GOV_POWERSAVE=y -CONFIG_DEVFREQ_GOV_USERSPACE=y -CONFIG_DEVFREQ_GOV_PASSIVE=m - -# -# DEVFREQ Drivers -# -CONFIG_PM_DEVFREQ_EVENT=y -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -CONFIG_EXTCON_ADC_JACK=m -CONFIG_EXTCON_ARIZONA=m -CONFIG_EXTCON_AXP288=m -CONFIG_EXTCON_FSA9480=m -CONFIG_EXTCON_GPIO=m -CONFIG_EXTCON_INTEL_INT3496=m -CONFIG_EXTCON_INTEL_CHT_WC=m -CONFIG_EXTCON_INTEL_MRFLD=m -CONFIG_EXTCON_MAX14577=m -CONFIG_EXTCON_MAX3355=m -CONFIG_EXTCON_MAX77693=m -CONFIG_EXTCON_MAX77843=m -CONFIG_EXTCON_MAX8997=m -CONFIG_EXTCON_PALMAS=m -CONFIG_EXTCON_PTN5150=m -CONFIG_EXTCON_RT8973A=m -CONFIG_EXTCON_SM5502=m -CONFIG_EXTCON_USB_GPIO=m -CONFIG_EXTCON_USBC_CROS_EC=m -CONFIG_MEMORY=y -CONFIG_IIO=m -CONFIG_IIO_BUFFER=y -CONFIG_IIO_BUFFER_CB=m -CONFIG_IIO_BUFFER_HW_CONSUMER=m -CONFIG_IIO_KFIFO_BUF=m -CONFIG_IIO_TRIGGERED_BUFFER=m -CONFIG_IIO_CONFIGFS=m -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -CONFIG_IIO_SW_DEVICE=m -CONFIG_IIO_SW_TRIGGER=m -CONFIG_IIO_TRIGGERED_EVENT=m - -# -# Accelerometers -# -CONFIG_ADIS16201=m -CONFIG_ADIS16209=m -CONFIG_ADXL372=m -CONFIG_ADXL372_SPI=m -CONFIG_ADXL372_I2C=m -CONFIG_BMA180=m -CONFIG_BMA220=m -CONFIG_BMA400=m -CONFIG_BMA400_I2C=m -CONFIG_BMC150_ACCEL=m -CONFIG_BMC150_ACCEL_I2C=m -CONFIG_BMC150_ACCEL_SPI=m -CONFIG_DA280=m -CONFIG_DA311=m -CONFIG_DMARD09=m -CONFIG_DMARD10=m -CONFIG_HID_SENSOR_ACCEL_3D=m -CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m -CONFIG_IIO_ST_ACCEL_3AXIS=m -CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m -CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m -CONFIG_KXSD9=m -CONFIG_KXSD9_SPI=m -CONFIG_KXSD9_I2C=m -CONFIG_KXCJK1013=m -CONFIG_MC3230=m -CONFIG_MMA7455=m -CONFIG_MMA7455_I2C=m -CONFIG_MMA7455_SPI=m -CONFIG_MMA7660=m -CONFIG_MMA8452=m -CONFIG_MMA9551_CORE=m -CONFIG_MMA9551=m -CONFIG_MMA9553=m -CONFIG_MXC4005=m -CONFIG_MXC6255=m -CONFIG_SCA3000=m -CONFIG_STK8312=m -CONFIG_STK8BA50=m -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD_SIGMA_DELTA=m -CONFIG_AD7091R5=m -CONFIG_AD7124=m -CONFIG_AD7192=m -CONFIG_AD7266=m -CONFIG_AD7291=m -CONFIG_AD7292=m -CONFIG_AD7298=m -CONFIG_AD7476=m -CONFIG_AD7606=m -CONFIG_AD7606_IFACE_PARALLEL=m -CONFIG_AD7606_IFACE_SPI=m -CONFIG_AD7766=m -CONFIG_AD7768_1=m -CONFIG_AD7780=m -CONFIG_AD7791=m -CONFIG_AD7793=m -CONFIG_AD7887=m -CONFIG_AD7923=m -CONFIG_AD7949=m -CONFIG_AD799X=m -CONFIG_AXP20X_ADC=m -CONFIG_AXP288_ADC=m -CONFIG_CC10001_ADC=m -CONFIG_DA9150_GPADC=m -CONFIG_DLN2_ADC=m -CONFIG_HI8435=m -CONFIG_HX711=m -CONFIG_INA2XX_ADC=m -CONFIG_INTEL_MRFLD_ADC=m -CONFIG_LP8788_ADC=m -CONFIG_LTC2471=m -CONFIG_LTC2485=m -CONFIG_LTC2496=m -CONFIG_LTC2497=m -CONFIG_MAX1027=m -CONFIG_MAX11100=m -CONFIG_MAX1118=m -CONFIG_MAX1363=m -CONFIG_MAX9611=m -CONFIG_MCP320X=m -CONFIG_MCP3422=m -CONFIG_MCP3911=m -CONFIG_MEN_Z188_ADC=m -CONFIG_NAU7802=m -CONFIG_PALMAS_GPADC=m -CONFIG_QCOM_VADC_COMMON=m -CONFIG_QCOM_SPMI_IADC=m -CONFIG_QCOM_SPMI_VADC=m -CONFIG_QCOM_SPMI_ADC5=m -CONFIG_TI_ADC081C=m -CONFIG_TI_ADC0832=m -CONFIG_TI_ADC084S021=m -CONFIG_TI_ADC12138=m -CONFIG_TI_ADC108S102=m -CONFIG_TI_ADC128S052=m -CONFIG_TI_ADC161S626=m -CONFIG_TI_ADS1015=m -CONFIG_TI_ADS7950=m -CONFIG_TI_AM335X_ADC=m -CONFIG_TI_TLC4541=m -CONFIG_TWL4030_MADC=m -CONFIG_TWL6030_GPADC=m -CONFIG_VIPERBOARD_ADC=m -CONFIG_XILINX_XADC=m -# end of Analog to digital converters - -# -# Analog Front Ends -# -# end of Analog Front Ends - -# -# Amplifiers -# -CONFIG_AD8366=m -CONFIG_HMC425=m -# end of Amplifiers - -# -# Chemical Sensors -# -CONFIG_ATLAS_PH_SENSOR=m -CONFIG_BME680=m -CONFIG_BME680_I2C=m -CONFIG_BME680_SPI=m -CONFIG_CCS811=m -CONFIG_IAQCORE=m -CONFIG_PMS7003=m -CONFIG_SENSIRION_SGP30=m -CONFIG_SPS30=m -CONFIG_VZ89X=m -# end of Chemical Sensors - -CONFIG_IIO_CROS_EC_SENSORS_CORE=m -CONFIG_IIO_CROS_EC_SENSORS=m -CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=m - -# -# Hid Sensor IIO Common -# -CONFIG_HID_SENSOR_IIO_COMMON=m -CONFIG_HID_SENSOR_IIO_TRIGGER=m -# end of Hid Sensor IIO Common - -CONFIG_IIO_MS_SENSORS_I2C=m - -# -# SSP Sensor Common -# -CONFIG_IIO_SSP_SENSORS_COMMONS=m -CONFIG_IIO_SSP_SENSORHUB=m -# end of SSP Sensor Common - -CONFIG_IIO_ST_SENSORS_I2C=m -CONFIG_IIO_ST_SENSORS_SPI=m -CONFIG_IIO_ST_SENSORS_CORE=m - -# -# Digital to analog converters -# -CONFIG_AD5064=m -CONFIG_AD5360=m -CONFIG_AD5380=m -CONFIG_AD5421=m -CONFIG_AD5446=m -CONFIG_AD5449=m -CONFIG_AD5592R_BASE=m -CONFIG_AD5592R=m -CONFIG_AD5593R=m -CONFIG_AD5504=m -CONFIG_AD5624R_SPI=m -CONFIG_AD5686=m -CONFIG_AD5686_SPI=m -CONFIG_AD5696_I2C=m -CONFIG_AD5755=m -CONFIG_AD5758=m -CONFIG_AD5761=m -CONFIG_AD5764=m -CONFIG_AD5770R=m -CONFIG_AD5791=m -CONFIG_AD7303=m -CONFIG_AD8801=m -CONFIG_DS4424=m -CONFIG_LTC1660=m -CONFIG_LTC2632=m -CONFIG_M62332=m -CONFIG_MAX517=m -CONFIG_MCP4725=m -CONFIG_MCP4922=m -CONFIG_TI_DAC082S085=m -CONFIG_TI_DAC5571=m -CONFIG_TI_DAC7311=m -CONFIG_TI_DAC7612=m -# end of Digital to analog converters - -# -# IIO dummy driver -# -CONFIG_IIO_SIMPLE_DUMMY=m -# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set -# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set -# end of IIO dummy driver - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# -CONFIG_AD9523=m -# end of Clock Generator/Distribution - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# -CONFIG_ADF4350=m -CONFIG_ADF4371=m -# end of Phase-Locked Loop (PLL) frequency synthesizers -# end of Frequency Synthesizers DDS/PLL - -# -# Digital gyroscope sensors -# -CONFIG_ADIS16080=m -CONFIG_ADIS16130=m -CONFIG_ADIS16136=m -CONFIG_ADIS16260=m -CONFIG_ADXRS450=m -CONFIG_BMG160=m -CONFIG_BMG160_I2C=m -CONFIG_BMG160_SPI=m -CONFIG_FXAS21002C=m -CONFIG_FXAS21002C_I2C=m -CONFIG_FXAS21002C_SPI=m -CONFIG_HID_SENSOR_GYRO_3D=m -CONFIG_MPU3050=m -CONFIG_MPU3050_I2C=m -CONFIG_IIO_ST_GYRO_3AXIS=m -CONFIG_IIO_ST_GYRO_I2C_3AXIS=m -CONFIG_IIO_ST_GYRO_SPI_3AXIS=m -CONFIG_ITG3200=m -# end of Digital gyroscope sensors - -# -# Health Sensors -# - -# -# Heart Rate Monitors -# -CONFIG_AFE4403=m -CONFIG_AFE4404=m -CONFIG_MAX30100=m -CONFIG_MAX30102=m -# end of Heart Rate Monitors -# end of Health Sensors - -# -# Humidity sensors -# -CONFIG_AM2315=m -CONFIG_DHT11=m -CONFIG_HDC100X=m -CONFIG_HID_SENSOR_HUMIDITY=m -CONFIG_HTS221=m -CONFIG_HTS221_I2C=m -CONFIG_HTS221_SPI=m -CONFIG_HTU21=m -CONFIG_SI7005=m -CONFIG_SI7020=m -# end of Humidity sensors - -# -# Inertial measurement units -# -CONFIG_ADIS16400=m -CONFIG_ADIS16460=m -CONFIG_ADIS16480=m -CONFIG_BMI160=m -CONFIG_BMI160_I2C=m -CONFIG_BMI160_SPI=m -CONFIG_FXOS8700=m -CONFIG_FXOS8700_I2C=m -CONFIG_FXOS8700_SPI=m -CONFIG_KMX61=m -CONFIG_INV_MPU6050_IIO=m -CONFIG_INV_MPU6050_I2C=m -CONFIG_INV_MPU6050_SPI=m -CONFIG_IIO_ST_LSM6DSX=m -CONFIG_IIO_ST_LSM6DSX_I2C=m -CONFIG_IIO_ST_LSM6DSX_SPI=m -CONFIG_IIO_ST_LSM6DSX_I3C=m -# end of Inertial measurement units - -CONFIG_IIO_ADIS_LIB=m -CONFIG_IIO_ADIS_LIB_BUFFER=y - -# -# Light sensors -# -CONFIG_ACPI_ALS=m -CONFIG_ADJD_S311=m -CONFIG_ADUX1020=m -CONFIG_AL3010=m -CONFIG_AL3320A=m -CONFIG_APDS9300=m -CONFIG_APDS9960=m -CONFIG_BH1750=m -CONFIG_BH1780=m -CONFIG_CM32181=m -CONFIG_CM3232=m -CONFIG_CM3323=m -CONFIG_CM36651=m -CONFIG_IIO_CROS_EC_LIGHT_PROX=m -CONFIG_GP2AP002=m -CONFIG_GP2AP020A00F=m -CONFIG_IQS621_ALS=m -CONFIG_SENSORS_ISL29018=m -CONFIG_SENSORS_ISL29028=m -CONFIG_ISL29125=m -CONFIG_HID_SENSOR_ALS=m -CONFIG_HID_SENSOR_PROX=m -CONFIG_JSA1212=m -CONFIG_RPR0521=m -CONFIG_SENSORS_LM3533=m -CONFIG_LTR501=m -CONFIG_LV0104CS=m -CONFIG_MAX44000=m -CONFIG_MAX44009=m -CONFIG_NOA1305=m -CONFIG_OPT3001=m -CONFIG_PA12203001=m -CONFIG_SI1133=m -CONFIG_SI1145=m -CONFIG_STK3310=m -CONFIG_ST_UVIS25=m -CONFIG_ST_UVIS25_I2C=m -CONFIG_ST_UVIS25_SPI=m -CONFIG_TCS3414=m -CONFIG_TCS3472=m -CONFIG_SENSORS_TSL2563=m -CONFIG_TSL2583=m -CONFIG_TSL2772=m -CONFIG_TSL4531=m -CONFIG_US5182D=m -CONFIG_VCNL4000=m -CONFIG_VCNL4035=m -CONFIG_VEML6030=m -CONFIG_VEML6070=m -CONFIG_VL6180=m -CONFIG_ZOPT2201=m -# end of Light sensors - -# -# Magnetometer sensors -# -CONFIG_AK8975=m -CONFIG_AK09911=m -CONFIG_BMC150_MAGN=m -CONFIG_BMC150_MAGN_I2C=m -CONFIG_BMC150_MAGN_SPI=m -CONFIG_MAG3110=m -CONFIG_HID_SENSOR_MAGNETOMETER_3D=m -CONFIG_MMC35240=m -CONFIG_IIO_ST_MAGN_3AXIS=m -CONFIG_IIO_ST_MAGN_I2C_3AXIS=m -CONFIG_IIO_ST_MAGN_SPI_3AXIS=m -CONFIG_SENSORS_HMC5843=m -CONFIG_SENSORS_HMC5843_I2C=m -CONFIG_SENSORS_HMC5843_SPI=m -CONFIG_SENSORS_RM3100=m -CONFIG_SENSORS_RM3100_I2C=m -CONFIG_SENSORS_RM3100_SPI=m -# end of Magnetometer sensors - -# -# Multiplexers -# -# end of Multiplexers - -# -# Inclinometer sensors -# -CONFIG_HID_SENSOR_INCLINOMETER_3D=m -CONFIG_HID_SENSOR_DEVICE_ROTATION=m -# end of Inclinometer sensors - -# -# Triggers - standalone -# -CONFIG_IIO_HRTIMER_TRIGGER=m -CONFIG_IIO_INTERRUPT_TRIGGER=m -CONFIG_IIO_TIGHTLOOP_TRIGGER=m -CONFIG_IIO_SYSFS_TRIGGER=m -# end of Triggers - standalone - -# -# Linear and angular position sensors -# -CONFIG_IQS624_POS=m -# end of Linear and angular position sensors - -# -# Digital potentiometers -# -CONFIG_AD5272=m -CONFIG_DS1803=m -CONFIG_MAX5432=m -CONFIG_MAX5481=m -CONFIG_MAX5487=m -CONFIG_MCP4018=m -CONFIG_MCP4131=m -CONFIG_MCP4531=m -CONFIG_MCP41010=m -CONFIG_TPL0102=m -# end of Digital potentiometers - -# -# Digital potentiostats -# -CONFIG_LMP91000=m -# end of Digital potentiostats - -# -# Pressure sensors -# -CONFIG_ABP060MG=m -CONFIG_BMP280=m -CONFIG_BMP280_I2C=m -CONFIG_BMP280_SPI=m -CONFIG_IIO_CROS_EC_BARO=m -CONFIG_DLHL60D=m -CONFIG_DPS310=m -CONFIG_HID_SENSOR_PRESS=m -CONFIG_HP03=m -CONFIG_ICP10100=m -CONFIG_MPL115=m -CONFIG_MPL115_I2C=m -CONFIG_MPL115_SPI=m -CONFIG_MPL3115=m -CONFIG_MS5611=m -CONFIG_MS5611_I2C=m -CONFIG_MS5611_SPI=m -CONFIG_MS5637=m -CONFIG_IIO_ST_PRESS=m -CONFIG_IIO_ST_PRESS_I2C=m -CONFIG_IIO_ST_PRESS_SPI=m -CONFIG_T5403=m -CONFIG_HP206C=m -CONFIG_ZPA2326=m -CONFIG_ZPA2326_I2C=m -CONFIG_ZPA2326_SPI=m -# end of Pressure sensors - -# -# Lightning sensors -# -CONFIG_AS3935=m -# end of Lightning sensors - -# -# Proximity and distance sensors -# -CONFIG_ISL29501=m -CONFIG_LIDAR_LITE_V2=m -CONFIG_MB1232=m -CONFIG_PING=m -CONFIG_RFD77402=m -CONFIG_SRF04=m -CONFIG_SX9500=m -CONFIG_SRF08=m -CONFIG_VL53L0X_I2C=m -# end of Proximity and distance sensors - -# -# Resolver to digital converters -# -CONFIG_AD2S90=m -CONFIG_AD2S1200=m -# end of Resolver to digital converters - -# -# Temperature sensors -# -CONFIG_IQS620AT_TEMP=m -CONFIG_LTC2983=m -CONFIG_MAXIM_THERMOCOUPLE=m -CONFIG_HID_SENSOR_TEMP=m -CONFIG_MLX90614=m -CONFIG_MLX90632=m -CONFIG_TMP006=m -CONFIG_TMP007=m -CONFIG_TSYS01=m -CONFIG_TSYS02D=m -CONFIG_MAX31856=m -# end of Temperature sensors - -CONFIG_NTB=m -CONFIG_NTB_MSI=y -CONFIG_NTB_IDT=m -CONFIG_NTB_SWITCHTEC=m -CONFIG_NTB_PINGPONG=m -CONFIG_NTB_TOOL=m -CONFIG_NTB_PERF=m -CONFIG_NTB_MSI_TEST=m -CONFIG_NTB_TRANSPORT=m -CONFIG_VME_BUS=y - -# -# VME Bridge Drivers -# -CONFIG_VME_CA91CX42=m -CONFIG_VME_TSI148=m -# CONFIG_VME_FAKE is not set - -# -# VME Board Drivers -# -CONFIG_VMIVME_7805=m - -# -# VME Device Drivers -# -CONFIG_VME_USER=m -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -# CONFIG_PWM_DEBUG is not set -CONFIG_PWM_CRC=y -CONFIG_PWM_CROS_EC=m -CONFIG_PWM_LP3943=m -CONFIG_PWM_LPSS=m -CONFIG_PWM_LPSS_PCI=m -CONFIG_PWM_LPSS_PLATFORM=m -CONFIG_PWM_PCA9685=m -CONFIG_PWM_TWL=m -CONFIG_PWM_TWL_LED=m - -# -# IRQ chip support -# -CONFIG_MADERA_IRQ=m -# end of IRQ chip support - -CONFIG_IPACK_BUS=m -CONFIG_BOARD_TPCI200=m -CONFIG_SERIAL_IPOCTAL=m -CONFIG_RESET_CONTROLLER=y -# CONFIG_RESET_BRCMSTB_RESCAL is not set -CONFIG_RESET_TI_SYSCON=m - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -CONFIG_BCM_KONA_USB2_PHY=m -CONFIG_PHY_PXA_28NM_HSIC=m -CONFIG_PHY_PXA_28NM_USB2=m -CONFIG_PHY_CPCAP_USB=m -CONFIG_PHY_QCOM_USB_HS=m -CONFIG_PHY_QCOM_USB_HSIC=m -CONFIG_PHY_SAMSUNG_USB2=m -CONFIG_PHY_TUSB1210=m -CONFIG_PHY_INTEL_EMMC=m -# end of PHY Subsystem - -CONFIG_POWERCAP=y -CONFIG_INTEL_RAPL_CORE=m -CONFIG_INTEL_RAPL=m -# CONFIG_IDLE_INJECT is not set -CONFIG_MCB=m -CONFIG_MCB_PCI=m -CONFIG_MCB_LPC=m - -# -# Performance monitor support -# -# end of Performance monitor support - -CONFIG_RAS=y -CONFIG_USB4=m - -# -# Android -# -# CONFIG_ANDROID is not set -# end of Android - -CONFIG_LIBNVDIMM=y -CONFIG_BLK_DEV_PMEM=m -CONFIG_ND_BLK=m -CONFIG_ND_CLAIM=y -CONFIG_ND_BTT=m -CONFIG_BTT=y -CONFIG_NVDIMM_KEYS=y -CONFIG_DAX_DRIVER=y -CONFIG_DAX=y -CONFIG_DEV_DAX=m -CONFIG_DEV_DAX_KMEM=m -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -CONFIG_NVMEM_SPMI_SDAM=m -CONFIG_RAVE_SP_EEPROM=m - -# -# HW tracing support -# -CONFIG_STM=m -CONFIG_STM_PROTO_BASIC=m -CONFIG_STM_PROTO_SYS_T=m -CONFIG_STM_DUMMY=m -CONFIG_STM_SOURCE_CONSOLE=m -CONFIG_STM_SOURCE_HEARTBEAT=m -CONFIG_STM_SOURCE_FTRACE=m -CONFIG_INTEL_TH=m -CONFIG_INTEL_TH_PCI=m -CONFIG_INTEL_TH_ACPI=m -CONFIG_INTEL_TH_GTH=m -CONFIG_INTEL_TH_STH=m -CONFIG_INTEL_TH_MSU=m -CONFIG_INTEL_TH_PTI=m -# CONFIG_INTEL_TH_DEBUG is not set -# end of HW tracing support - -CONFIG_FPGA=m -CONFIG_ALTERA_PR_IP_CORE=m -CONFIG_FPGA_MGR_ALTERA_PS_SPI=m -CONFIG_FPGA_MGR_ALTERA_CVP=m -CONFIG_FPGA_MGR_XILINX_SPI=m -CONFIG_FPGA_MGR_MACHXO2_SPI=m -CONFIG_FPGA_BRIDGE=m -CONFIG_ALTERA_FREEZE_BRIDGE=m -CONFIG_XILINX_PR_DECOUPLER=m -CONFIG_FPGA_REGION=m -CONFIG_FPGA_DFL=m -CONFIG_FPGA_DFL_FME=m -CONFIG_FPGA_DFL_FME_MGR=m -CONFIG_FPGA_DFL_FME_BRIDGE=m -CONFIG_FPGA_DFL_FME_REGION=m -CONFIG_FPGA_DFL_AFU=m -CONFIG_FPGA_DFL_PCI=m -CONFIG_TEE=m - -# -# TEE drivers -# -# end of TEE drivers - -CONFIG_MULTIPLEXER=m - -# -# Multiplexer drivers -# -CONFIG_MUX_ADG792A=m -CONFIG_MUX_ADGS1408=m -CONFIG_MUX_GPIO=m -# end of Multiplexer drivers - -CONFIG_PM_OPP=y -# CONFIG_SIOX is not set -# CONFIG_SLIMBUS is not set -# CONFIG_INTERCONNECT is not set -CONFIG_COUNTER=m -CONFIG_MOST=m -# end of Device Drivers - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y -CONFIG_FS_IOMAP=y -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -CONFIG_EXT4_FS=y -CONFIG_EXT4_USE_FOR_EXT2=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -CONFIG_JFS_STATISTICS=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -# CONFIG_XFS_ONLINE_SCRUB is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -CONFIG_OCFS2_FS_STATS=y -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -# CONFIG_BTRFS_FS_REF_VERIFY is not set -CONFIG_NILFS2_FS=m -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -CONFIG_F2FS_FS_SECURITY=y -# CONFIG_F2FS_CHECK_FS is not set -# CONFIG_F2FS_IO_TRACE is not set -# CONFIG_F2FS_FAULT_INJECTION is not set -# CONFIG_F2FS_FS_COMPRESSION is not set -CONFIG_ZONEFS_FS=m -CONFIG_FS_DAX=y -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -# CONFIG_EXPORTFS_BLOCK_OPS is not set -CONFIG_FILE_LOCKING=y -CONFIG_MANDATORY_FILE_LOCKING=y -# CONFIG_FS_ENCRYPTION is not set -CONFIG_FS_VERITY=y -# CONFIG_FS_VERITY_DEBUG is not set -# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_AUTOFS4_FS=m -CONFIG_AUTOFS_FS=m -CONFIG_FUSE_FS=y -CONFIG_CUSE=m -CONFIG_VIRTIO_FS=m -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set -# CONFIG_OVERLAY_FS_INDEX is not set -# CONFIG_OVERLAY_FS_METACOPY is not set - -# -# Caches -# -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=m -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set -# end of Caches - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -# end of CD-ROM/DVD Filesystems - -# -# DOS/FAT/EXFAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_FAT_DEFAULT_UTF8 is not set -CONFIG_EXFAT_FS=m -CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -# end of DOS/FAT/EXFAT/NT Filesystems - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_VMCORE=y -# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_CHILDREN=y -CONFIG_PROC_PID_ARCH_STATUS=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_MEMFD_CREATE=y -CONFIG_CONFIGFS_FS=m -CONFIG_EFIVAR_FS=y -# end of Pseudo filesystems - -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ORANGEFS_FS=m -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_ECRYPT_FS=y -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -# CONFIG_JFFS2_CMODE_PRIORITY is not set -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_UBIFS_FS=m -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UBIFS_FS_ZSTD=y -CONFIG_UBIFS_ATIME_SUPPORT=y -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_SECURITY=y -CONFIG_UBIFS_FS_AUTHENTICATION=y -CONFIG_CRAMFS=m -CONFIG_CRAMFS_BLOCKDEV=y -# CONFIG_CRAMFS_MTD is not set -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_FILE_CACHE is not set -CONFIG_SQUASHFS_FILE_DIRECT=y -# CONFIG_SQUASHFS_DECOMP_SINGLE is not set -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -CONFIG_SQUASHFS_LZ4=y -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -# CONFIG_SQUASHFS_ZSTD is not set -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_QNX6FS_FS=m -# CONFIG_QNX6FS_DEBUG is not set -CONFIG_ROMFS_FS=m -CONFIG_ROMFS_BACKED_BY_BLOCK=y -# CONFIG_ROMFS_BACKED_BY_MTD is not set -# CONFIG_ROMFS_BACKED_BY_BOTH is not set -CONFIG_ROMFS_ON_BLOCK=y -CONFIG_PSTORE=y -CONFIG_PSTORE_DEFLATE_COMPRESS=m -# CONFIG_PSTORE_LZO_COMPRESS is not set -# CONFIG_PSTORE_LZ4_COMPRESS is not set -# CONFIG_PSTORE_LZ4HC_COMPRESS is not set -# CONFIG_PSTORE_842_COMPRESS is not set -# CONFIG_PSTORE_ZSTD_COMPRESS is not set -CONFIG_PSTORE_COMPRESS=y -CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y -CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" -# CONFIG_PSTORE_CONSOLE is not set -# CONFIG_PSTORE_PMSG is not set -# CONFIG_PSTORE_FTRACE is not set -CONFIG_PSTORE_RAM=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_ZIP is not set -CONFIG_VBOXSF_FS=m -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V2=m -CONFIG_NFS_V3=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_PNFS_FILE_LAYOUT=m -CONFIG_PNFS_BLOCK=m -CONFIG_PNFS_FLEXFILE_LAYOUT=m -CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" -CONFIG_NFS_V4_1_MIGRATION=y -CONFIG_NFS_V4_SECURITY_LABEL=y -CONFIG_NFS_FSCACHE=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFS_DEBUG=y -# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -# CONFIG_NFSD_BLOCKLAYOUT is not set -# CONFIG_NFSD_SCSILAYOUT is not set -# CONFIG_NFSD_FLEXFILELAYOUT is not set -CONFIG_NFSD_V4_SECURITY_LABEL=y -CONFIG_GRACE_PERIOD=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BACKCHANNEL=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y -CONFIG_SUNRPC_DEBUG=y -CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_CEPH_FS=m -CONFIG_CEPH_FSCACHE=y -CONFIG_CEPH_FS_POSIX_ACL=y -CONFIG_CEPH_FS_SECURITY_LABEL=y -CONFIG_CIFS=m -# CONFIG_CIFS_STATS2 is not set -CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set -CONFIG_CIFS_DFS_UPCALL=y -# CONFIG_CIFS_SMB_DIRECT is not set -CONFIG_CIFS_FSCACHE=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_AFS_FSCACHE=y -# CONFIG_AFS_DEBUG_CURSOR is not set -CONFIG_9P_FS=m -CONFIG_9P_FSCACHE=y -CONFIG_9P_FS_POSIX_ACL=y -CONFIG_9P_FS_SECURITY=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -# CONFIG_DLM_DEBUG is not set -# CONFIG_UNICODE is not set -CONFIG_IO_WQ=y -# end of File systems - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_REQUEST_CACHE=y -CONFIG_PERSISTENT_KEYRINGS=y -CONFIG_BIG_KEYS=y -CONFIG_TRUSTED_KEYS=y -CONFIG_ENCRYPTED_KEYS=y -CONFIG_KEY_DH_OPERATIONS=y -# CONFIG_SECURITY_DMESG_RESTRICT is not set -CONFIG_SECURITY=y -CONFIG_SECURITY_WRITABLE_HOOKS=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -CONFIG_PAGE_TABLE_ISOLATION=y -# CONFIG_SECURITY_INFINIBAND is not set -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_PATH=y -CONFIG_INTEL_TXT=y -CONFIG_LSM_MMAP_MIN_ADDR=0 -CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_HARDENED_USERCOPY_FALLBACK=y -# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set -CONFIG_FORTIFY_SOURCE=y -# CONFIG_STATIC_USERMODEHELPER is not set -CONFIG_SECURITY_SELINUX=y -CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_DISABLE=y -CONFIG_SECURITY_SELINUX_DEVELOP=y -CONFIG_SECURITY_SELINUX_AVC_STATS=y -CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 -CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9 -CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256 -CONFIG_SECURITY_SMACK=y -# CONFIG_SECURITY_SMACK_BRINGUP is not set -CONFIG_SECURITY_SMACK_NETFILTER=y -# CONFIG_SECURITY_SMACK_APPEND_SIGNALS is not set -CONFIG_SECURITY_TOMOYO=y -CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 -CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 -# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set -CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" -CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" -# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set -CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_HASH=y -CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y -# CONFIG_SECURITY_APPARMOR_DEBUG is not set -# CONFIG_SECURITY_LOADPIN is not set -CONFIG_SECURITY_YAMA=y -# CONFIG_SECURITY_SAFESETID is not set -# CONFIG_SECURITY_LOCKDOWN_LSM is not set -CONFIG_INTEGRITY=y -CONFIG_INTEGRITY_SIGNATURE=y -CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y -CONFIG_INTEGRITY_TRUSTED_KEYRING=y -CONFIG_INTEGRITY_AUDIT=y -CONFIG_IMA=y -CONFIG_IMA_MEASURE_PCR_IDX=10 -CONFIG_IMA_LSM_RULES=y -# CONFIG_IMA_TEMPLATE is not set -CONFIG_IMA_NG_TEMPLATE=y -# CONFIG_IMA_SIG_TEMPLATE is not set -CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" -CONFIG_IMA_DEFAULT_HASH_SHA1=y -# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set -CONFIG_IMA_DEFAULT_HASH="sha1" -# CONFIG_IMA_WRITE_POLICY is not set -# CONFIG_IMA_READ_POLICY is not set -CONFIG_IMA_APPRAISE=y -# CONFIG_IMA_ARCH_POLICY is not set -# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set -CONFIG_IMA_APPRAISE_BOOTPARAM=y -# CONFIG_IMA_APPRAISE_MODSIG is not set -CONFIG_IMA_TRUSTED_KEYRING=y -CONFIG_IMA_BLACKLIST_KEYRING=y -# CONFIG_IMA_LOAD_X509 is not set -CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y -CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y -# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set -CONFIG_EVM=y -CONFIG_EVM_ATTR_FSUUID=y -CONFIG_EVM_EXTRA_SMACK_XATTRS=y -# CONFIG_EVM_ADD_XATTRS is not set -# CONFIG_EVM_LOAD_X509 is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_SMACK is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_APPARMOR=y -# CONFIG_DEFAULT_SECURITY_DAC is not set -CONFIG_LSM="yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo" - -# -# Kernel hardening options -# - -# -# Memory initialization -# -CONFIG_INIT_STACK_NONE=y -CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y -# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set -# end of Memory initialization -# end of Kernel hardening options -# end of Security options - -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_SKCIPHER=y -CONFIG_CRYPTO_SKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_SIMD=m -CONFIG_CRYPTO_GLUE_HELPER_X86=m -CONFIG_CRYPTO_ENGINE=m - -# -# Public-key cryptography -# -CONFIG_CRYPTO_RSA=y -CONFIG_CRYPTO_DH=y -CONFIG_CRYPTO_ECC=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_ECRDSA=m -CONFIG_CRYPTO_CURVE25519=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=y -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_ECHAINIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CFB=m -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_OFB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_KEYWRAP=m -CONFIG_CRYPTO_NHPOLY1305=m -CONFIG_CRYPTO_ADIANTUM=m -CONFIG_CRYPTO_ESSIV=m - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32C_INTEL=y -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRC32_PCLMUL=m -CONFIG_CRYPTO_XXHASH=m -CONFIG_CRYPTO_BLAKE2B=m -CONFIG_CRYPTO_BLAKE2S=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_GHASH=y -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_SHA3=m -CONFIG_CRYPTO_SM3=m -CONFIG_CRYPTO_STREEBOG=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_AES_TI=m -CONFIG_CRYPTO_AES_NI_INTEL=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_BLOWFISH_COMMON=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST_COMMON=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_SERPENT_SSE2_586=m -CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_TWOFISH_586=m - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_842=m -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m -CONFIG_CRYPTO_ZSTD=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_HASH=y -CONFIG_CRYPTO_DRBG_CTR=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -# CONFIG_CRYPTO_STATS is not set -CONFIG_CRYPTO_HASH_INFO=y - -# -# Crypto library routines -# -CONFIG_CRYPTO_LIB_AES=y -CONFIG_CRYPTO_LIB_ARC4=m -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=m -CONFIG_CRYPTO_LIB_BLAKE2S=m -CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m -CONFIG_CRYPTO_LIB_CHACHA=m -CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m -CONFIG_CRYPTO_LIB_CURVE25519=m -CONFIG_CRYPTO_LIB_DES=m -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 -CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m -CONFIG_CRYPTO_LIB_POLY1305=m -CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_PADLOCK=y -CONFIG_CRYPTO_DEV_PADLOCK_AES=m -CONFIG_CRYPTO_DEV_PADLOCK_SHA=m -CONFIG_CRYPTO_DEV_GEODE=m -CONFIG_CRYPTO_DEV_ATMEL_I2C=m -CONFIG_CRYPTO_DEV_ATMEL_ECC=m -CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m -CONFIG_CRYPTO_DEV_CCP=y -CONFIG_CRYPTO_DEV_CCP_DD=m -CONFIG_CRYPTO_DEV_SP_CCP=y -CONFIG_CRYPTO_DEV_CCP_CRYPTO=m -# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set -CONFIG_CRYPTO_DEV_QAT=m -CONFIG_CRYPTO_DEV_QAT_DH895xCC=m -CONFIG_CRYPTO_DEV_QAT_C3XXX=m -CONFIG_CRYPTO_DEV_QAT_C62X=m -CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m -CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m -CONFIG_CRYPTO_DEV_QAT_C62XVF=m -CONFIG_CRYPTO_DEV_CHELSIO=m -# CONFIG_CHELSIO_IPSEC_INLINE is not set -CONFIG_CRYPTO_DEV_VIRTIO=m -CONFIG_CRYPTO_DEV_SAFEXCEL=m -CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m -# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y -CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m -CONFIG_X509_CERTIFICATE_PARSER=y -CONFIG_PKCS8_PRIVATE_KEY_PARSER=m -CONFIG_TPM_KEY_PARSER=m -CONFIG_PKCS7_MESSAGE_PARSER=y -# CONFIG_PKCS7_TEST_KEY is not set -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set - -# -# Certificates for signature checking -# -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set -# CONFIG_SECONDARY_TRUSTED_KEYRING is not set -# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -# end of Certificates for signature checking - -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=m -CONFIG_RAID6_PQ_BENCHMARK=y -CONFIG_PACKING=y -CONFIG_BITREVERSE=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_CORDIC=m -CONFIG_RATIONAL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_IOMAP=y -CONFIG_ARCH_HAS_FAST_MULTIPLIER=y -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC64=m -# CONFIG_CRC4 is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -CONFIG_CRC8=m -CONFIG_XXHASH=y -CONFIG_AUDIT_GENERIC=y -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_842_COMPRESS=m -CONFIG_842_DECOMPRESS=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=m -CONFIG_LZ4HC_COMPRESS=m -CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=m -CONFIG_XZ_DEC=y -CONFIG_XZ_DEC_X86=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_TEST=m -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_ENC8=y -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_BCH=m -CONFIG_BCH_CONST_PARAMS=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_BTREE=y -CONFIG_INTERVAL_TREE=y -CONFIG_XARRAY_MULTI=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_VIRT_OPS=y -CONFIG_SWIOTLB=y -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=0 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 -# CONFIG_DMA_API_DEBUG is not set -CONFIG_SGL_ALLOC=y -CONFIG_CHECK_SIGNATURE=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_LRU_CACHE=m -CONFIG_CLZ_TAB=y -CONFIG_IRQ_POLL=y -CONFIG_MPILIB=y -CONFIG_SIGNATURE=y -CONFIG_DIMLIB=y -CONFIG_OID_REGISTRY=y -CONFIG_UCS2_STRING=y -CONFIG_HAVE_GENERIC_VDSO=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_GENERIC_VDSO_TIME_NS=y -CONFIG_FONT_SUPPORT=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -CONFIG_FONT_6x10=y -# CONFIG_FONT_10x18 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -CONFIG_FONT_TER16x32=y -CONFIG_SG_POOL=y -CONFIG_MEMREGION=y -CONFIG_ARCH_STACKWALK=y -CONFIG_SBITMAP=y -CONFIG_PARMAN=m -CONFIG_OBJAGG=m -# CONFIG_STRING_SELFTEST is not set -# end of Library routines - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -# CONFIG_PRINTK_CALLER is not set -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 -CONFIG_CONSOLE_LOGLEVEL_QUIET=4 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -CONFIG_BOOT_PRINTK_DELAY=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_SYMBOLIC_ERRNAME=y -CONFIG_DEBUG_BUGVERBOSE=y -# end of printk and dmesg options - -# -# Compile-time checks and compiler options -# -# CONFIG_DEBUG_INFO is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_READABLE_ASM is not set -# CONFIG_HEADERS_INSTALL is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -# end of Compile-time checks and compiler options - -# -# Generic Kernel Debugging Instruments -# -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -CONFIG_MAGIC_SYSRQ_SERIAL=y -CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE="" -CONFIG_DEBUG_FS=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_KGDB=y -CONFIG_KGDB_SERIAL_CONSOLE=y -# CONFIG_KGDB_TESTS is not set -CONFIG_KGDB_LOW_LEVEL_TRAP=y -CONFIG_KGDB_KDB=y -CONFIG_KDB_DEFAULT_ENABLE=0x1 -CONFIG_KDB_KEYBOARD=y -CONFIG_KDB_CONTINUE_CATASTROPHIC=0 -CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y -# CONFIG_UBSAN is not set -# end of Generic Kernel Debugging Instruments - -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MISC=y - -# -# Memory Debugging -# -CONFIG_PAGE_EXTENSION=y -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_PAGE_OWNER is not set -# CONFIG_PAGE_POISONING is not set -# CONFIG_DEBUG_PAGE_REF is not set -# CONFIG_DEBUG_RODATA_TEST is not set -CONFIG_GENERIC_PTDUMP=y -# CONFIG_PTDUMP_DEBUGFS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_SCHED_STACK_END_CHECK=y -# CONFIG_DEBUG_VM is not set -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -# CONFIG_DEBUG_VIRTUAL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m -# CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_DEBUG_HIGHMEM is not set -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -CONFIG_CC_HAS_KASAN_GENERIC=y -CONFIG_KASAN_STACK=1 -# end of Memory Debugging - -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Oops, Lockups and Hangs -# -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_LOCKUP_DETECTOR=y -CONFIG_SOFTLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_HARDLOCKUP_DETECTOR_PERF=y -CONFIG_HARDLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -# CONFIG_WQ_WATCHDOG is not set -# CONFIG_TEST_LOCKUP is not set -# end of Debug Oops, Lockups and Hangs - -# -# Scheduler Debugging -# -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -CONFIG_SCHEDSTATS=y -# end of Scheduler Debugging - -# CONFIG_DEBUG_TIMEKEEPING is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -CONFIG_LOCK_DEBUGGING_SUPPORT=y -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -CONFIG_LOCK_TORTURE_TEST=m -CONFIG_WW_MUTEX_SELFTEST=m -# end of Lock Debugging (spinlocks, mutexes, etc...) - -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -# CONFIG_DEBUG_KOBJECT is not set - -# -# Debug kernel data structures -# -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_PLIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BUG_ON_DATA_CORRUPTION is not set -# end of Debug kernel data structures - -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -CONFIG_TORTURE_TEST=m -# CONFIG_RCU_PERF_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# end of RCU Debugging - -# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -# CONFIG_LATENCYTOP is not set -CONFIG_USER_STACKTRACE_SUPPORT=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_FENTRY=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACER_MAX_TRACE=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -# CONFIG_BOOTTIME_TRACING is not set -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -CONFIG_DYNAMIC_FTRACE=y -CONFIG_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y -CONFIG_FUNCTION_PROFILER=y -CONFIG_STACK_TRACER=y -# CONFIG_PREEMPTIRQ_EVENTS is not set -# CONFIG_IRQSOFF_TRACER is not set -CONFIG_SCHED_TRACER=y -# CONFIG_HWLAT_TRACER is not set -CONFIG_MMIOTRACE=y -CONFIG_FTRACE_SYSCALLS=y -CONFIG_TRACER_SNAPSHOT=y -# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_KPROBE_EVENTS=y -# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set -# CONFIG_UPROBE_EVENTS is not set -CONFIG_BPF_EVENTS=y -CONFIG_DYNAMIC_EVENTS=y -CONFIG_PROBE_EVENTS=y -# CONFIG_BPF_KPROBE_OVERRIDE is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_HIST_TRIGGERS is not set -# CONFIG_TRACE_EVENT_INJECT is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_MMIOTRACE_TEST is not set -# CONFIG_PREEMPTIRQ_DELAY_TEST is not set -# CONFIG_KPROBE_EVENT_GEN_TEST is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -# CONFIG_SAMPLES is not set -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -CONFIG_STRICT_DEVMEM=y -CONFIG_IO_STRICT_DEVMEM=y - -# -# x86 Debugging -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_EARLY_PRINTK_USB=y -# CONFIG_X86_VERBOSE_BOOTUP is not set -CONFIG_EARLY_PRINTK=y -CONFIG_EARLY_PRINTK_DBGP=y -# CONFIG_EARLY_PRINTK_USB_XDBC is not set -# CONFIG_EFI_PGT_DUMP is not set -# CONFIG_DEBUG_WX is not set -CONFIG_DOUBLEFAULT=y -# CONFIG_DEBUG_TLBFLUSH is not set -CONFIG_HAVE_MMIOTRACE_SUPPORT=y -# CONFIG_X86_DECODER_SELFTEST is not set -# CONFIG_IO_DELAY_0X80 is not set -CONFIG_IO_DELAY_0XED=y -# CONFIG_IO_DELAY_UDELAY is not set -# CONFIG_IO_DELAY_NONE is not set -# CONFIG_DEBUG_BOOT_PARAMS is not set -# CONFIG_CPA_DEBUG is not set -# CONFIG_DEBUG_ENTRY is not set -# CONFIG_DEBUG_NMI_SELFTEST is not set -CONFIG_X86_DEBUG_FPU=y -CONFIG_PUNIT_ATOM_DEBUG=m -CONFIG_UNWINDER_FRAME_POINTER=y -# CONFIG_UNWINDER_GUESS is not set -# end of x86 Debugging - -# -# Kernel Testing and Coverage -# -# CONFIG_KUNIT is not set -CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_PM_NOTIFIER_ERROR_INJECT=m -CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m -CONFIG_FUNCTION_ERROR_INJECTION=y -# CONFIG_FAULT_INJECTION is not set -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -CONFIG_RUNTIME_TESTING_MENU=y -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_MIN_HEAP is not set -# CONFIG_TEST_SORT is not set -# CONFIG_KPROBES_SANITY_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_REED_SOLOMON_TEST is not set -CONFIG_INTERVAL_TREE_TEST=m -CONFIG_PERCPU_TEST=m -# CONFIG_ATOMIC64_SELFTEST is not set -CONFIG_ASYNC_RAID6_TEST=m -CONFIG_TEST_HEXDUMP=m -CONFIG_TEST_STRING_HELPERS=m -CONFIG_TEST_STRSCPY=m -CONFIG_TEST_KSTRTOX=m -CONFIG_TEST_PRINTF=m -CONFIG_TEST_BITMAP=m -CONFIG_TEST_BITFIELD=m -CONFIG_TEST_UUID=m -CONFIG_TEST_XARRAY=m -CONFIG_TEST_OVERFLOW=m -CONFIG_TEST_RHASHTABLE=m -CONFIG_TEST_HASH=m -CONFIG_TEST_IDA=m -CONFIG_TEST_PARMAN=m -CONFIG_TEST_LKM=m -CONFIG_TEST_VMALLOC=m -CONFIG_TEST_USER_COPY=m -CONFIG_TEST_BPF=m -CONFIG_TEST_BLACKHOLE_DEV=m -CONFIG_FIND_BIT_BENCHMARK=m -CONFIG_TEST_FIRMWARE=m -# CONFIG_TEST_SYSCTL is not set -CONFIG_TEST_UDELAY=m -CONFIG_TEST_STATIC_KEYS=m -# CONFIG_TEST_KMOD is not set -# CONFIG_TEST_MEMCAT_P is not set -CONFIG_TEST_OBJAGG=m -# CONFIG_TEST_STACKINIT is not set -# CONFIG_TEST_MEMINIT is not set -CONFIG_MEMTEST=y -# CONFIG_HYPERV_TESTING is not set -# end of Kernel Testing and Coverage -# end of Kernel hacking diff --git a/gnu/packages/aux-files/linux-libre/5.7-x86_64.conf b/gnu/packages/aux-files/linux-libre/5.7-x86_64.conf deleted file mode 100644 index 316a0620e6..0000000000 --- a/gnu/packages/aux-files/linux-libre/5.7-x86_64.conf +++ /dev/null @@ -1,10487 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/x86 5.7.12-gnu Kernel Configuration -# - -# -# Compiler: gcc (Debian 8.3.0-6) 8.3.0 -# -CONFIG_CC_IS_GCC=y -CONFIG_GCC_VERSION=80300 -CONFIG_LD_VERSION=231010000 -CONFIG_CLANG_VERSION=0 -CONFIG_CC_CAN_LINK=y -CONFIG_CC_HAS_ASM_GOTO=y -CONFIG_CC_HAS_ASM_INLINE=y -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_TABLE_SORT=y -CONFIG_THREAD_INFO_IN_TASK=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_BUILD_SALT="" -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_BZIP2 is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_XZ is not set -# CONFIG_KERNEL_LZO is not set -# CONFIG_KERNEL_LZ4 is not set -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_USELIB=y -CONFIG_AUDIT=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_IRQ_MSI_IOMMU=y -CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y -CONFIG_GENERIC_IRQ_RESERVATION_MODE=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -# CONFIG_GENERIC_IRQ_DEBUGFS is not set -# end of IRQ subsystem - -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_ARCH_CLOCKSOURCE_INIT=y -CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y -CONFIG_GENERIC_CMOS_UPDATE=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -# CONFIG_NO_HZ_FULL is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -# end of Timers subsystem - -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -CONFIG_SCHED_THERMAL_PRESSURE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_PSI=y -# CONFIG_PSI_DEFAULT_DISABLED is not set -# end of CPU/Task time and stats accounting - -CONFIG_CPU_ISOLATION=y - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -CONFIG_TREE_SRCU=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RCU_NEED_SEGCBLIST=y -# end of RCU Subsystem - -CONFIG_BUILD_BIN2C=y -# CONFIG_IKCONFIG is not set -# CONFIG_IKHEADERS is not set -CONFIG_LOG_BUF_SHIFT=18 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y - -# -# Scheduler features -# -# CONFIG_UCLAMP_TASK is not set -# end of Scheduler features - -CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y -CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y -CONFIG_CC_HAS_INT128=y -CONFIG_ARCH_SUPPORTS_INT128=y -CONFIG_NUMA_BALANCING=y -CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y -CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set -CONFIG_MEMCG_KMEM=y -CONFIG_BLK_CGROUP=y -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_CGROUP_PIDS=y -# CONFIG_CGROUP_RDMA is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_PERF=y -CONFIG_CGROUP_BPF=y -# CONFIG_CGROUP_DEBUG is not set -CONFIG_SOCK_CGROUP_DATA=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_TIME_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -CONFIG_CHECKPOINT_RESTORE=y -CONFIG_SCHED_AUTOGROUP=y -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -CONFIG_BOOT_CONFIG=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_HAVE_UID16=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_HAVE_PCSPKR_PLATFORM=y -CONFIG_BPF=y -CONFIG_EXPERT=y -CONFIG_UID16=y -CONFIG_MULTIUSER=y -CONFIG_SGETMASK_SYSCALL=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_FHANDLE=y -CONFIG_POSIX_TIMERS=y -CONFIG_PRINTK=y -CONFIG_PRINTK_NMI=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_FUTEX_PI=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_IO_URING=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_HAVE_ARCH_USERFAULTFD_WP=y -CONFIG_MEMBARRIER=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y -CONFIG_KALLSYMS_BASE_RELATIVE=y -CONFIG_BPF_SYSCALL=y -CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y -CONFIG_USERFAULTFD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_RSEQ=y -# CONFIG_DEBUG_RSEQ is not set -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -# CONFIG_PC104 is not set - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# end of Kernel Performance Events And Counters - -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_MEMCG_SYSFS_ON is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_SLAB_MERGE_DEFAULT=y -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SLAB_FREELIST_HARDENED=y -CONFIG_SHUFFLE_PAGE_ALLOCATOR=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SYSTEM_DATA_VERIFICATION=y -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -# end of General setup - -CONFIG_64BIT=y -CONFIG_X86_64=y -CONFIG_X86=y -CONFIG_INSTRUCTION_DECODER=y -CONFIG_OUTPUT_FORMAT="elf64-x86-64" -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_MMU=y -CONFIG_ARCH_MMAP_RND_BITS_MIN=28 -CONFIG_ARCH_MMAP_RND_BITS_MAX=32 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_HAS_CPU_RELAX=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_ARCH_HAS_FILTER_PGPROT=y -CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y -CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ZONE_DMA32=y -CONFIG_AUDIT_ARCH=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_HAVE_INTEL_TXT=y -CONFIG_X86_64_SMP=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_PGTABLE_LEVELS=4 -CONFIG_CC_HAS_SANE_STACKPROTECTOR=y - -# -# Processor type and features -# -# CONFIG_ZONE_DMA is not set -CONFIG_SMP=y -CONFIG_X86_FEATURE_NAMES=y -CONFIG_X86_X2APIC=y -CONFIG_X86_MPPARSE=y -# CONFIG_GOLDFISH is not set -CONFIG_RETPOLINE=y -# CONFIG_X86_CPU_RESCTRL is not set -CONFIG_X86_EXTENDED_PLATFORM=y -CONFIG_X86_NUMACHIP=y -# CONFIG_X86_VSMP is not set -# CONFIG_X86_UV is not set -# CONFIG_X86_GOLDFISH is not set -# CONFIG_X86_INTEL_MID is not set -CONFIG_X86_INTEL_LPSS=y -CONFIG_X86_AMD_PLATFORM_DEVICE=y -CONFIG_IOSF_MBI=y -CONFIG_IOSF_MBI_DEBUG=y -CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -CONFIG_PARAVIRT_XXL=y -# CONFIG_PARAVIRT_DEBUG is not set -CONFIG_PARAVIRT_SPINLOCKS=y -CONFIG_X86_HV_CALLBACK_VECTOR=y -CONFIG_XEN=y -CONFIG_XEN_PV=y -CONFIG_XEN_PV_SMP=y -CONFIG_XEN_DOM0=y -CONFIG_XEN_PVHVM=y -CONFIG_XEN_PVHVM_SMP=y -CONFIG_XEN_512GB=y -CONFIG_XEN_SAVE_RESTORE=y -# CONFIG_XEN_DEBUG_FS is not set -CONFIG_XEN_PVH=y -CONFIG_KVM_GUEST=y -CONFIG_ARCH_CPUIDLE_HALTPOLL=y -CONFIG_PVH=y -CONFIG_KVM_DEBUG_FS=y -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -CONFIG_PARAVIRT_CLOCK=y -CONFIG_JAILHOUSE_GUEST=y -# CONFIG_ACRN_GUEST is not set -# CONFIG_MK8 is not set -# CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -# CONFIG_MATOM is not set -CONFIG_GENERIC_CPU=y -CONFIG_X86_INTERNODE_CACHE_SHIFT=6 -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_TSC=y -CONFIG_X86_CMPXCHG64=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=64 -CONFIG_X86_DEBUGCTLMSR=y -CONFIG_IA32_FEAT_CTL=y -CONFIG_X86_VMX_FEATURE_NAMES=y -CONFIG_PROCESSOR_SELECT=y -CONFIG_CPU_SUP_INTEL=y -CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_HYGON=y -CONFIG_CPU_SUP_CENTAUR=y -CONFIG_CPU_SUP_ZHAOXIN=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_DMI=y -CONFIG_GART_IOMMU=y -# CONFIG_MAXSMP is not set -CONFIG_NR_CPUS_RANGE_BEGIN=2 -CONFIG_NR_CPUS_RANGE_END=512 -CONFIG_NR_CPUS_DEFAULT=64 -CONFIG_NR_CPUS=256 -CONFIG_SCHED_SMT=y -CONFIG_SCHED_MC=y -CONFIG_SCHED_MC_PRIO=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y -CONFIG_X86_MCE=y -# CONFIG_X86_MCELOG_LEGACY is not set -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -CONFIG_X86_MCE_THRESHOLD=y -# CONFIG_X86_MCE_INJECT is not set -CONFIG_X86_THERMAL_VECTOR=y - -# -# Performance monitoring -# -CONFIG_PERF_EVENTS_INTEL_UNCORE=y -CONFIG_PERF_EVENTS_INTEL_RAPL=y -CONFIG_PERF_EVENTS_INTEL_CSTATE=y -CONFIG_PERF_EVENTS_AMD_POWER=m -# end of Performance monitoring - -CONFIG_X86_16BIT=y -CONFIG_X86_ESPFIX64=y -CONFIG_X86_VSYSCALL_EMULATION=y -CONFIG_X86_IOPL_IOPERM=y -CONFIG_I8K=m -CONFIG_MICROCODE=y -CONFIG_MICROCODE_INTEL=y -CONFIG_MICROCODE_AMD=y -CONFIG_MICROCODE_OLD_INTERFACE=y -CONFIG_X86_MSR=m -CONFIG_X86_CPUID=m -# CONFIG_X86_5LEVEL is not set -CONFIG_X86_DIRECT_GBPAGES=y -# CONFIG_X86_CPA_STATISTICS is not set -# CONFIG_AMD_MEM_ENCRYPT is not set -CONFIG_NUMA=y -CONFIG_AMD_NUMA=y -CONFIG_X86_64_ACPI_NUMA=y -CONFIG_NODES_SPAN_OTHER_NODES=y -# CONFIG_NUMA_EMU is not set -CONFIG_NODES_SHIFT=6 -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_MEMORY_PROBE=y -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_X86_PMEM_LEGACY_DEVICE=y -CONFIG_X86_PMEM_LEGACY=y -CONFIG_X86_CHECK_BIOS_CORRUPTION=y -CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y -CONFIG_X86_RESERVE_LOW=64 -CONFIG_MTRR=y -CONFIG_MTRR_SANITIZER=y -CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 -CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 -CONFIG_X86_PAT=y -CONFIG_ARCH_USES_PG_UNCACHED=y -CONFIG_ARCH_RANDOM=y -CONFIG_X86_SMAP=y -CONFIG_X86_UMIP=y -CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y -CONFIG_X86_INTEL_TSX_MODE_OFF=y -# CONFIG_X86_INTEL_TSX_MODE_ON is not set -# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set -CONFIG_EFI=y -CONFIG_EFI_STUB=y -CONFIG_EFI_MIXED=y -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_KEXEC=y -CONFIG_KEXEC_FILE=y -CONFIG_ARCH_HAS_KEXEC_PURGATORY=y -# CONFIG_KEXEC_SIG is not set -CONFIG_CRASH_DUMP=y -CONFIG_KEXEC_JUMP=y -CONFIG_PHYSICAL_START=0x1000000 -CONFIG_RELOCATABLE=y -CONFIG_RANDOMIZE_BASE=y -CONFIG_X86_NEED_RELOCS=y -CONFIG_PHYSICAL_ALIGN=0x1000000 -CONFIG_DYNAMIC_MEMORY_LAYOUT=y -CONFIG_RANDOMIZE_MEMORY=y -CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa -CONFIG_HOTPLUG_CPU=y -# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set -# CONFIG_DEBUG_HOTPLUG_CPU0 is not set -# CONFIG_COMPAT_VDSO is not set -# CONFIG_LEGACY_VSYSCALL_EMULATE is not set -# CONFIG_LEGACY_VSYSCALL_XONLY is not set -CONFIG_LEGACY_VSYSCALL_NONE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_MODIFY_LDT_SYSCALL=y -CONFIG_HAVE_LIVEPATCH=y -CONFIG_LIVEPATCH=y -# end of Processor type and features - -CONFIG_ARCH_HAS_ADD_PAGES=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_USE_PERCPU_NUMA_NODE_ID=y -CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y -CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y -CONFIG_ARCH_ENABLE_THP_MIGRATION=y - -# -# Power management and ACPI options -# -CONFIG_ARCH_HIBERNATION_HEADER=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SUSPEND_SKIP_SYNC is not set -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="" -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -CONFIG_PM_WAKELOCKS=y -CONFIG_PM_WAKELOCKS_LIMIT=100 -CONFIG_PM_WAKELOCKS_GC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_PM_SLEEP_DEBUG=y -# CONFIG_DPM_WATCHDOG is not set -CONFIG_PM_TRACE=y -CONFIG_PM_TRACE_RTC=y -CONFIG_PM_CLK=y -CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y -# CONFIG_ENERGY_MODEL is not set -CONFIG_ARCH_SUPPORTS_ACPI=y -CONFIG_ACPI=y -CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y -CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y -CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y -# CONFIG_ACPI_DEBUGGER is not set -CONFIG_ACPI_SPCR_TABLE=y -CONFIG_ACPI_LPIT=y -CONFIG_ACPI_SLEEP=y -# CONFIG_ACPI_PROCFS_POWER is not set -CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y -CONFIG_ACPI_EC_DEBUGFS=m -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_FAN=y -CONFIG_ACPI_TAD=m -CONFIG_ACPI_DOCK=y -CONFIG_ACPI_CPU_FREQ_PSS=y -CONFIG_ACPI_PROCESSOR_CSTATE=y -CONFIG_ACPI_PROCESSOR_IDLE=y -CONFIG_ACPI_CPPC_LIB=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_IPMI=m -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_PROCESSOR_AGGREGATOR=m -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_CUSTOM_DSDT_FILE="" -CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y -CONFIG_ACPI_TABLE_UPGRADE=y -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_PCI_SLOT=y -CONFIG_ACPI_CONTAINER=y -CONFIG_ACPI_HOTPLUG_MEMORY=y -CONFIG_ACPI_HOTPLUG_IOAPIC=y -CONFIG_ACPI_SBS=m -CONFIG_ACPI_HED=y -# CONFIG_ACPI_CUSTOM_METHOD is not set -CONFIG_ACPI_BGRT=y -# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set -CONFIG_ACPI_NFIT=m -# CONFIG_NFIT_SECURITY_DEBUG is not set -CONFIG_ACPI_NUMA=y -CONFIG_ACPI_HMAT=y -CONFIG_HAVE_ACPI_APEI=y -CONFIG_HAVE_ACPI_APEI_NMI=y -CONFIG_ACPI_APEI=y -CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_PCIEAER=y -CONFIG_ACPI_APEI_MEMORY_FAILURE=y -CONFIG_ACPI_APEI_EINJ=m -# CONFIG_ACPI_APEI_ERST_DEBUG is not set -CONFIG_DPTF_POWER=m -CONFIG_ACPI_WATCHDOG=y -CONFIG_ACPI_EXTLOG=m -CONFIG_ACPI_ADXL=y -# CONFIG_PMIC_OPREGION is not set -CONFIG_ACPI_CONFIGFS=m -CONFIG_X86_PM_TIMER=y -CONFIG_SFI=y - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y - -# -# CPU frequency scaling drivers -# -CONFIG_X86_INTEL_PSTATE=y -CONFIG_X86_PCC_CPUFREQ=y -CONFIG_X86_ACPI_CPUFREQ=y -CONFIG_X86_ACPI_CPUFREQ_CPB=y -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_AMD_FREQ_SENSITIVITY=m -CONFIG_X86_SPEEDSTEP_CENTRINO=y -CONFIG_X86_P4_CLOCKMOD=m - -# -# shared options -# -CONFIG_X86_SPEEDSTEP_LIB=m -# end of CPU Frequency scaling - -# -# CPU Idle -# -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_GOV_TEO=y -CONFIG_CPU_IDLE_GOV_HALTPOLL=y -CONFIG_HALTPOLL_CPUIDLE=m -# end of CPU Idle - -CONFIG_INTEL_IDLE=y -# end of Power management and ACPI options - -# -# Bus options (PCI etc.) -# -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -CONFIG_PCI_XEN=y -CONFIG_MMCONF_FAM10H=y -# CONFIG_PCI_CNB20LE_QUIRK is not set -# CONFIG_ISA_BUS is not set -CONFIG_ISA_DMA_API=y -CONFIG_AMD_NB=y -# CONFIG_X86_SYSFB is not set -# end of Bus options (PCI etc.) - -# -# Binary Emulations -# -CONFIG_IA32_EMULATION=y -CONFIG_X86_X32=y -CONFIG_COMPAT_32=y -CONFIG_COMPAT=y -CONFIG_COMPAT_FOR_U64_ALIGNMENT=y -CONFIG_SYSVIPC_COMPAT=y -# end of Binary Emulations - -# -# Firmware Drivers -# -CONFIG_EDD=y -CONFIG_EDD_OFF=y -CONFIG_FIRMWARE_MEMMAP=y -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=m -CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y -CONFIG_ISCSI_IBFT_FIND=y -CONFIG_ISCSI_IBFT=m -CONFIG_FW_CFG_SYSFS=m -# CONFIG_FW_CFG_SYSFS_CMDLINE is not set -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=y -CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=m -# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set -CONFIG_EFI_RUNTIME_MAP=y -# CONFIG_EFI_FAKE_MEMMAP is not set -CONFIG_EFI_SOFT_RESERVE=y -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_EFI_BOOTLOADER_CONTROL=m -# CONFIG_EFI_CAPSULE_LOADER is not set -# CONFIG_EFI_TEST is not set -CONFIG_APPLE_PROPERTIES=y -CONFIG_RESET_ATTACK_MITIGATION=y -# CONFIG_EFI_RCI2_TABLE is not set -# CONFIG_EFI_DISABLE_PCI_DMA is not set -# end of EFI (Extensible Firmware Interface) Support - -CONFIG_UEFI_CPER=y -CONFIG_UEFI_CPER_X86=y -CONFIG_EFI_DEV_PATH_PARSER=y -CONFIG_EFI_EARLYCON=y -CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y - -# -# Tegra firmware driver -# -# end of Tegra firmware driver -# end of Firmware Drivers - -CONFIG_HAVE_KVM=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_KVM_IRQ_ROUTING=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_KVM_MMIO=y -CONFIG_KVM_ASYNC_PF=y -CONFIG_HAVE_KVM_MSI=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_KVM_VFIO=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_KVM_COMPAT=y -CONFIG_HAVE_KVM_IRQ_BYPASS=y -CONFIG_HAVE_KVM_NO_POLL=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=m -CONFIG_KVM_WERROR=y -CONFIG_KVM_INTEL=m -CONFIG_KVM_AMD=m -CONFIG_KVM_AMD_SEV=y -# CONFIG_KVM_MMU_AUDIT is not set -CONFIG_AS_AVX512=y -CONFIG_AS_SHA1_NI=y -CONFIG_AS_SHA256_NI=y - -# -# General architecture-dependent options -# -CONFIG_CRASH_CORE=y -CONFIG_KEXEC_CORE=y -CONFIG_HOTPLUG_SMT=y -CONFIG_OPROFILE=m -# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_OPROFILE_NMI_TIMER=y -CONFIG_KPROBES=y -CONFIG_JUMP_LABEL=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_OPTPROBES=y -CONFIG_KPROBES_ON_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_KRETPROBES=y -CONFIG_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_KPROBES_ON_FTRACE=y -CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SET_DIRECT_MAP=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y -CONFIG_HAVE_ASM_MODVERSIONS=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y -CONFIG_HAVE_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_PERF_EVENTS_NMI=y -CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y -CONFIG_MMU_GATHER_TABLE_FREE=y -CONFIG_MMU_GATHER_RCU_TABLE_FREE=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_STACKLEAK=y -CONFIG_HAVE_STACKPROTECTOR=y -CONFIG_CC_HAS_STACKPROTECTOR_NONE=y -CONFIG_STACKPROTECTOR=y -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MOVE_PMD=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_HAVE_ARCH_SOFT_DIRTY=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_HAVE_EXIT_THREAD=y -CONFIG_ARCH_MMAP_RND_BITS=28 -CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y -CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 -CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_STACK_VALIDATION=y -CONFIG_HAVE_RELIABLE_STACKTRACE=y -CONFIG_ISA_BUS_API=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_COMPAT_OLD_SIGACTION=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_HAVE_ARCH_VMAP_STACK=y -CONFIG_VMAP_STACK=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y -CONFIG_ARCH_USE_MEMREMAP_PROT=y -# CONFIG_LOCK_EVENT_COUNTS is not set -CONFIG_ARCH_HAS_MEM_ENCRYPT=y - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# end of GCOV-based kernel profiling - -CONFIG_HAVE_GCC_PLUGINS=y -# end of General architecture-dependent options - -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_ASM_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set -CONFIG_UNUSED_SYMBOLS=y -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_RQ_ALLOC_TIME=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_CGROUP_RWSTAT=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_BLK_DEV_INTEGRITY_T10=y -CONFIG_BLK_DEV_ZONED=y -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_DEV_THROTTLING_LOW is not set -CONFIG_BLK_CMDLINE_PARSER=y -CONFIG_BLK_WBT=y -# CONFIG_BLK_CGROUP_IOLATENCY is not set -CONFIG_BLK_CGROUP_IOCOST=y -CONFIG_BLK_WBT_MQ=y -CONFIG_BLK_DEBUG_FS=y -CONFIG_BLK_DEBUG_FS_ZONED=y -# CONFIG_BLK_SED_OPAL is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -CONFIG_AIX_PARTITION=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -CONFIG_ATARI_PARTITION=y -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -CONFIG_SGI_PARTITION=y -CONFIG_ULTRIX_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_KARMA_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SYSV68_PARTITION=y -CONFIG_CMDLINE_PARTITION=y -# end of Partition Types - -CONFIG_BLOCK_COMPAT=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_MQ_VIRTIO=y -CONFIG_BLK_MQ_RDMA=y -CONFIG_BLK_PM=y - -# -# IO Schedulers -# -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=m -CONFIG_IOSCHED_BFQ=m -# CONFIG_BFQ_GROUP_IOSCHED is not set -# end of IO Schedulers - -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PADATA=y -CONFIG_ASN1=y -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_INLINE_READ_UNLOCK=y -CONFIG_INLINE_READ_UNLOCK_IRQ=y -CONFIG_INLINE_WRITE_UNLOCK=y -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y -CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y -CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y -CONFIG_FREEZER=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -CONFIG_COMPAT_BINFMT_ELF=y -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y -# end of Executable file formats - -# -# Memory Management options -# -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_NEED_MULTIPLE_NODES=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_FAST_GUP=y -CONFIG_NUMA_KEEP_MEMINFO=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_HAVE_BOOTMEM_INFO_NODE=y -CONFIG_MEMORY_HOTPLUG=y -CONFIG_MEMORY_HOTPLUG_SPARSE=y -# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set -CONFIG_MEMORY_HOTREMOVE=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_PAGE_REPORTING=y -CONFIG_MIGRATION=y -CONFIG_CONTIG_ALLOC=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_VIRT_TO_BUS=y -CONFIG_MMU_NOTIFIER=y -CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 -CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y -CONFIG_MEMORY_FAILURE=y -CONFIG_HWPOISON_INJECT=m -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y -# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -CONFIG_ARCH_WANTS_THP_SWAP=y -CONFIG_THP_SWAP=y -CONFIG_CLEANCACHE=y -CONFIG_FRONTSWAP=y -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -CONFIG_MEM_SOFT_DIRTY=y -CONFIG_ZSWAP=y -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set -CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set -# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set -CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" -CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y -# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set -# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set -CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" -# CONFIG_ZSWAP_DEFAULT_ON is not set -CONFIG_ZPOOL=y -CONFIG_ZBUD=y -CONFIG_Z3FOLD=m -CONFIG_ZSMALLOC=y -CONFIG_PGTABLE_MAPPING=y -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set -CONFIG_IDLE_PAGE_TRACKING=y -CONFIG_ARCH_HAS_PTE_DEVMAP=y -CONFIG_ZONE_DEVICE=y -CONFIG_DEV_PAGEMAP_OPS=y -CONFIG_HMM_MIRROR=y -# CONFIG_DEVICE_PRIVATE is not set -CONFIG_FRAME_VECTOR=y -CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y -CONFIG_ARCH_HAS_PKEYS=y -# CONFIG_PERCPU_STATS is not set -# CONFIG_GUP_BENCHMARK is not set -# CONFIG_READ_ONLY_THP_FOR_FS is not set -CONFIG_ARCH_HAS_PTE_SPECIAL=y -CONFIG_MAPPING_DIRTY_HELPERS=y -# end of Memory Management options - -CONFIG_NET=y -CONFIG_COMPAT_NETLINK_MESSAGES=y -CONFIG_NET_INGRESS=y -CONFIG_NET_EGRESS=y -CONFIG_NET_REDIRECT=y -CONFIG_SKB_EXTENSIONS=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=m -CONFIG_UNIX=y -CONFIG_UNIX_SCM=y -CONFIG_UNIX_DIAG=m -CONFIG_TLS=m -# CONFIG_TLS_DEVICE is not set -# CONFIG_TLS_TOE is not set -CONFIG_XFRM=y -CONFIG_XFRM_OFFLOAD=y -CONFIG_XFRM_ALGO=m -CONFIG_XFRM_USER=m -CONFIG_XFRM_INTERFACE=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -CONFIG_XFRM_STATISTICS=y -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -# CONFIG_SMC is not set -# CONFIG_XDP_SOCKETS is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_FIB_TRIE_STATS=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE_COMMON=y -CONFIG_IP_MROUTE=y -# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_ESP_OFFLOAD=m -# CONFIG_INET_ESPINTCP is not set -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m -CONFIG_INET_RAW_DIAG=m -# CONFIG_INET_DIAG_DESTROY is not set -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_NV=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_CONG_DCTCP=m -CONFIG_TCP_CONG_CDG=m -CONFIG_TCP_CONG_BBR=m -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_ESP_OFFLOAD=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -CONFIG_IPV6_FOU=m -CONFIG_IPV6_FOU_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y -# CONFIG_IPV6_SEG6_LWTUNNEL is not set -# CONFIG_IPV6_SEG6_HMAC is not set -# CONFIG_IPV6_RPL_LWTUNNEL is not set -CONFIG_NETLABEL=y -CONFIG_MPTCP=y -CONFIG_MPTCP_IPV6=y -CONFIG_MPTCP_HMAC_TEST=n -CONFIG_NETWORK_SECMARK=y -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_FAMILY_BRIDGE=y -CONFIG_NETFILTER_FAMILY_ARP=y -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NETFILTER_NETLINK_OSF=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -CONFIG_NF_LOG_NETDEV=m -CONFIG_NETFILTER_CONNCOUNT=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -CONFIG_NF_CT_NETLINK_HELPER=m -CONFIG_NETFILTER_NETLINK_GLUE_CT=y -CONFIG_NF_NAT=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=y -CONFIG_NF_NAT_MASQUERADE=y -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_INET=y -CONFIG_NF_TABLES_NETDEV=y -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -CONFIG_NFT_FLOW_OFFLOAD=m -CONFIG_NFT_COUNTER=m -CONFIG_NFT_CONNLIMIT=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_TUNNEL=m -CONFIG_NFT_OBJREF=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NFT_FIB=m -CONFIG_NFT_FIB_INET=m -CONFIG_NFT_XFRM=m -CONFIG_NFT_SOCKET=m -CONFIG_NFT_OSF=m -CONFIG_NFT_TPROXY=m -CONFIG_NFT_SYNPROXY=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -CONFIG_NFT_FIB_NETDEV=m -CONFIG_NF_FLOW_TABLE_INET=m -CONFIG_NF_FLOW_TABLE=m -CONFIG_NETFILTER_XTABLES=m - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -CONFIG_NETFILTER_XT_TARGET_AUDIT=m -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -# end of Core Netfilter Configuration - -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -CONFIG_IP_SET_HASH_IPMAC=m -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_MH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS MH scheduler -# -CONFIG_IP_VS_MH_TAB_INDEX=12 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_SOCKET_IPV4=m -CONFIG_NF_TPROXY_IPV4=m -CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NFT_FIB_IPV4=m -CONFIG_NF_TABLES_ARP=y -CONFIG_NF_FLOW_TABLE_IPV4=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -# end of IP: Netfilter Configuration - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_SOCKET_IPV6=m -CONFIG_NF_TPROXY_IPV6=m -CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NFT_FIB_IPV6=m -CONFIG_NF_FLOW_TABLE_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_SRH=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m -# end of IPv6: Netfilter Configuration - -CONFIG_NF_DEFRAG_IPV6=m - -# -# DECnet: Netfilter Configuration -# -CONFIG_DECNET_NF_GRABULATOR=m -# end of DECnet: Netfilter Configuration - -CONFIG_NF_TABLES_BRIDGE=m -CONFIG_NFT_BRIDGE_META=m -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_NF_CONNTRACK_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -# CONFIG_BPFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -# CONFIG_IP_DCCP_CCID3 is not set -# end of DCCP CCIDs Configuration - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# end of DCCP Kernel Hacking - -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_INET_SCTP_DIAG=m -CONFIG_RDS=m -CONFIG_RDS_RDMA=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set -CONFIG_TIPC=m -CONFIG_TIPC_MEDIA_IB=y -CONFIG_TIPC_MEDIA_UDP=y -CONFIG_TIPC_CRYPTO=y -CONFIG_TIPC_DIAG=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_MRP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y -CONFIG_NET_DSA=m -CONFIG_NET_DSA_TAG_8021Q=m -CONFIG_NET_DSA_TAG_AR9331=m -CONFIG_NET_DSA_TAG_BRCM_COMMON=m -CONFIG_NET_DSA_TAG_BRCM=m -CONFIG_NET_DSA_TAG_BRCM_PREPEND=m -CONFIG_NET_DSA_TAG_GSWIP=m -CONFIG_NET_DSA_TAG_DSA=m -CONFIG_NET_DSA_TAG_EDSA=m -CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_OCELOT=m -CONFIG_NET_DSA_TAG_QCA=m -CONFIG_NET_DSA_TAG_LAN9303=m -CONFIG_NET_DSA_TAG_SJA1105=m -CONFIG_NET_DSA_TAG_TRAILER=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -CONFIG_DECNET=m -# CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_PHONET=m -CONFIG_6LOWPAN=m -# CONFIG_6LOWPAN_DEBUGFS is not set -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m -CONFIG_6LOWPAN_GHC_UDP=m -CONFIG_6LOWPAN_GHC_ICMPV6=m -CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m -CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m -CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m -CONFIG_IEEE802154=m -CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_CBS=m -CONFIG_NET_SCH_ETF=m -CONFIG_NET_SCH_TAPRIO=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_SKBPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_CAKE=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_FQ_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -CONFIG_NET_SCH_ETS=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_CLS_MATCHALL=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_EMATCH_CANID=m -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_EMATCH_IPT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_SAMPLE=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_MPLS=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -CONFIG_NET_ACT_CTINFO=m -CONFIG_NET_ACT_SKBMOD=m -CONFIG_NET_ACT_IFE=m -CONFIG_NET_ACT_TUNNEL_KEY=m -CONFIG_NET_ACT_CT=m -CONFIG_NET_IFE_SKBMARK=m -CONFIG_NET_IFE_SKBPRIO=m -CONFIG_NET_IFE_SKBTCINDEX=m -# CONFIG_NET_TC_SKB_EXT is not set -CONFIG_NET_SCH_FIFO=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=y -CONFIG_BATMAN_ADV=m -# CONFIG_BATMAN_ADV_BATMAN_V is not set -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -CONFIG_BATMAN_ADV_DEBUGFS=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_BATMAN_ADV_SYSFS=y -# CONFIG_BATMAN_ADV_TRACING is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_OPENVSWITCH_GENEVE=m -CONFIG_VSOCKETS=m -CONFIG_VSOCKETS_DIAG=m -CONFIG_VSOCKETS_LOOPBACK=m -CONFIG_VMWARE_VMCI_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS_COMMON=m -CONFIG_HYPERV_VSOCKETS=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=m -CONFIG_MPLS_ROUTING=m -CONFIG_MPLS_IPTUNNEL=m -CONFIG_NET_NSH=m -CONFIG_HSR=m -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_L3_MASTER_DEV=y -CONFIG_NET_NCSI=y -# CONFIG_NCSI_OEM_CMD_GET_MAC is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -# CONFIG_BPF_JIT is not set -# CONFIG_BPF_STREAM_PARSER is not set -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NET_DROP_MONITOR is not set -# end of Network testing -# end of Networking options - -CONFIG_HAMRADIO=y - -# -# Packet Radio protocols -# -CONFIG_AX25=m -CONFIG_AX25_DAMA_SLAVE=y -CONFIG_NETROM=m -CONFIG_ROSE=m - -# -# AX.25 network device drivers -# -CONFIG_MKISS=m -CONFIG_6PACK=m -CONFIG_BPQETHER=m -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -CONFIG_BAYCOM_PAR=m -CONFIG_YAM=m -# end of AX.25 network device drivers - -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m -CONFIG_CAN_J1939=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -CONFIG_CAN_VXCAN=m -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -CONFIG_CAN_JANZ_ICAN3=m -CONFIG_CAN_KVASER_PCIEFD=m -CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m -CONFIG_CAN_C_CAN_PCI=m -CONFIG_CAN_CC770=m -CONFIG_CAN_CC770_ISA=m -CONFIG_CAN_CC770_PLATFORM=m -CONFIG_CAN_IFI_CANFD=m -CONFIG_CAN_M_CAN=m -CONFIG_CAN_M_CAN_PLATFORM=m -CONFIG_CAN_M_CAN_TCAN4X5X=m -CONFIG_CAN_PEAK_PCIEFD=m -CONFIG_CAN_SJA1000=m -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_EMS_PCMCIA=m -CONFIG_CAN_F81601=m -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_PEAK_PCMCIA=m -CONFIG_CAN_PLX_PCI=m -CONFIG_CAN_SJA1000_ISA=m -CONFIG_CAN_SJA1000_PLATFORM=m -CONFIG_CAN_SOFTING=m -CONFIG_CAN_SOFTING_CS=m - -# -# CAN SPI interfaces -# -CONFIG_CAN_HI311X=m -CONFIG_CAN_MCP251X=m -# end of CAN SPI interfaces - -# -# CAN USB interfaces -# -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -CONFIG_CAN_MCBA_USB=m -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_UCAN=m -# end of CAN USB interfaces - -# CONFIG_CAN_DEBUG_DEVICES is not set -# end of CAN Device Drivers - -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_CMTP=m -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -CONFIG_BT_6LOWPAN=m -# CONFIG_BT_LEDS is not set -# CONFIG_BT_SELFTEST is not set -CONFIG_BT_DEBUGFS=y - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_QCA=m -CONFIG_BT_HCIBTUSB=m -# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_MTK=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_SERDEV=y -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_NOKIA=m -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIUART_3WIRE=y -CONFIG_BT_HCIUART_INTEL=y -CONFIG_BT_HCIUART_BCM=y -CONFIG_BT_HCIUART_RTL=y -CONFIG_BT_HCIUART_QCA=y -CONFIG_BT_HCIUART_AG6XX=y -CONFIG_BT_HCIUART_MRVL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_BT_ATH3K=m -CONFIG_BT_MTKSDIO=m -CONFIG_BT_MTKUART=m -CONFIG_BT_HCIRSI=m -# end of Bluetooth device drivers - -CONFIG_AF_RXRPC=m -CONFIG_AF_RXRPC_IPV6=y -# CONFIG_AF_RXRPC_INJECT_LOSS is not set -# CONFIG_AF_RXRPC_DEBUG is not set -# CONFIG_RXKAD is not set -CONFIG_AF_KCM=m -CONFIG_STREAM_PARSER=y -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y -CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y -CONFIG_CFG80211_DEFAULT_PS=y -CONFIG_CFG80211_DEBUGFS=y -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_CFG80211_WEXT_EXPORT=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -CONFIG_MAC80211_DEBUGFS=y -CONFIG_MAC80211_MESSAGE_TRACING=y -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=y -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -CONFIG_RFKILL_GPIO=m -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -CONFIG_NET_9P_XEN=m -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set -CONFIG_CAIF=m -# CONFIG_CAIF_DEBUG is not set -CONFIG_CAIF_NETDEV=m -CONFIG_CAIF_USB=m -CONFIG_CEPH_LIB=m -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set -CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -CONFIG_NFC_NCI=m -CONFIG_NFC_NCI_SPI=m -CONFIG_NFC_NCI_UART=m -CONFIG_NFC_HCI=m -CONFIG_NFC_SHDLC=y - -# -# Near Field Communication (NFC) devices -# -CONFIG_NFC_TRF7970A=m -CONFIG_NFC_SIM=m -CONFIG_NFC_PORT100=m -CONFIG_NFC_FDP=m -CONFIG_NFC_FDP_I2C=m -CONFIG_NFC_PN544=m -CONFIG_NFC_PN544_I2C=m -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -CONFIG_NFC_PN533_I2C=m -CONFIG_NFC_PN532_UART=m -CONFIG_NFC_MICROREAD=m -CONFIG_NFC_MICROREAD_I2C=m -CONFIG_NFC_MRVL=m -CONFIG_NFC_MRVL_USB=m -CONFIG_NFC_MRVL_UART=m -CONFIG_NFC_MRVL_I2C=m -CONFIG_NFC_MRVL_SPI=m -CONFIG_NFC_ST21NFCA=m -CONFIG_NFC_ST21NFCA_I2C=m -CONFIG_NFC_ST_NCI=m -CONFIG_NFC_ST_NCI_I2C=m -CONFIG_NFC_ST_NCI_SPI=m -CONFIG_NFC_NXP_NCI=m -CONFIG_NFC_NXP_NCI_I2C=m -CONFIG_NFC_S3FWRN5=m -CONFIG_NFC_S3FWRN5_I2C=m -CONFIG_NFC_ST95HF=m -# end of Near Field Communication (NFC) devices - -CONFIG_PSAMPLE=m -CONFIG_NET_IFE=m -CONFIG_LWTUNNEL=y -CONFIG_LWTUNNEL_BPF=y -CONFIG_DST_CACHE=y -CONFIG_GRO_CELLS=y -CONFIG_NET_SOCK_MSG=y -CONFIG_NET_DEVLINK=y -CONFIG_PAGE_POOL=y -CONFIG_FAILOVER=y -CONFIG_ETHTOOL_NETLINK=y -CONFIG_HAVE_EBPF_JIT=y - -# -# Device Drivers -# -CONFIG_HAVE_EISA=y -# CONFIG_EISA is not set -CONFIG_HAVE_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCIEPORTBUS=y -CONFIG_HOTPLUG_PCI_PCIE=y -CONFIG_PCIEAER=y -# CONFIG_PCIEAER_INJECT is not set -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEASPM=y -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCIE_DPC=y -CONFIG_PCIE_PTM=y -# CONFIG_PCIE_BW is not set -# CONFIG_PCIE_EDR is not set -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_REALLOC_ENABLE_AUTO=y -CONFIG_PCI_STUB=m -# CONFIG_PCI_PF_STUB is not set -CONFIG_XEN_PCIDEV_FRONTEND=m -CONFIG_PCI_ATS=y -CONFIG_PCI_LOCKLESS_CONFIG=y -CONFIG_PCI_IOV=y -CONFIG_PCI_PRI=y -CONFIG_PCI_PASID=y -# CONFIG_PCI_P2PDMA is not set -CONFIG_PCI_LABEL=y -CONFIG_PCI_HYPERV=m -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_HOTPLUG_PCI_ACPI_IBM=m -CONFIG_HOTPLUG_PCI_CPCI=y -CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m -CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m -CONFIG_HOTPLUG_PCI_SHPC=y - -# -# PCI controller drivers -# -# CONFIG_VMD is not set -CONFIG_PCI_HYPERV_INTERFACE=m - -# -# DesignWare PCI Core Support -# -# CONFIG_PCIE_DW_PLAT_HOST is not set -# CONFIG_PCI_MESON is not set -# end of DesignWare PCI Core Support - -# -# Mobiveil PCIe Core Support -# -# end of Mobiveil PCIe Core Support - -# -# Cadence PCIe controllers support -# -# end of Cadence PCIe controllers support -# end of PCI controller drivers - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set -# end of PCI Endpoint - -# -# PCI switch controller drivers -# -CONFIG_PCI_SW_SWITCHTEC=m -# end of PCI switch controller drivers - -CONFIG_PCCARD=m -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -CONFIG_YENTA_O2=y -CONFIG_YENTA_RICOH=y -CONFIG_YENTA_TI=y -CONFIG_YENTA_ENE_TUNE=y -CONFIG_YENTA_TOSHIBA=y -CONFIG_PD6729=m -CONFIG_I82092=m -CONFIG_PCCARD_NONSTATIC=y -CONFIG_RAPIDIO=y -CONFIG_RAPIDIO_TSI721=m -CONFIG_RAPIDIO_DISC_TIMEOUT=30 -# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set -CONFIG_RAPIDIO_DMA_ENGINE=y -# CONFIG_RAPIDIO_DEBUG is not set -CONFIG_RAPIDIO_ENUM_BASIC=m -CONFIG_RAPIDIO_CHMAN=m -CONFIG_RAPIDIO_MPORT_CDEV=m - -# -# RapidIO Switch drivers -# -CONFIG_RAPIDIO_TSI57X=m -CONFIG_RAPIDIO_CPS_XX=m -CONFIG_RAPIDIO_TSI568=m -CONFIG_RAPIDIO_CPS_GEN2=m -CONFIG_RAPIDIO_RXS_GEN3=m -# end of RapidIO Switch drivers - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y - -# -# Firmware loader -# -CONFIG_FW_LOADER=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_FW_LOADER_COMPRESS=y -CONFIG_FW_CACHE=y -# end of Firmware loader - -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set -CONFIG_HMEM_REPORTING=y -# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set -CONFIG_SYS_HYPERVISOR=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_SPMI=m -CONFIG_REGMAP_W1=m -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_REGMAP_SCCB=m -CONFIG_REGMAP_I3C=m -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set -# end of Generic Driver Options - -# -# Bus devices -# -CONFIG_MHI_BUS=m -# end of Bus devices - -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_GNSS=m -CONFIG_GNSS_SERIAL=m -CONFIG_GNSS_MTK_SERIAL=m -CONFIG_GNSS_SIRF_SERIAL=m -CONFIG_GNSS_UBX_SERIAL=m -CONFIG_MTD=m -# CONFIG_MTD_TESTS is not set - -# -# Partition parsers -# -CONFIG_MTD_AR7_PARTS=m -CONFIG_MTD_CMDLINE_PARTS=m -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# end of Partition parsers - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_SM_FTL=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_SWAP=m -# CONFIG_MTD_PARTITIONED_MASTER is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -# end of RAM/ROM/Flash chip drivers - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -# CONFIG_MTD_PHYSMAP_COMPAT is not set -CONFIG_MTD_PHYSMAP_GPIO_ADDR=y -CONFIG_MTD_SBC_GXX=m -CONFIG_MTD_AMD76XROM=m -CONFIG_MTD_ICHXROM=m -CONFIG_MTD_ESB2ROM=m -CONFIG_MTD_CK804XROM=m -CONFIG_MTD_SCB2_FLASH=m -CONFIG_MTD_NETtel=m -CONFIG_MTD_L440GX=m -CONFIG_MTD_PCI=m -CONFIG_MTD_PCMCIA=m -# CONFIG_MTD_PCMCIA_ANONYMOUS is not set -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m -# end of Mapping drivers for chip access - -# -# Self-contained MTD device drivers -# -CONFIG_MTD_PMC551=m -# CONFIG_MTD_PMC551_BUGFIX is not set -# CONFIG_MTD_PMC551_DEBUG is not set -CONFIG_MTD_DATAFLASH=m -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -CONFIG_MTD_DATAFLASH_OTP=y -CONFIG_MTD_MCHP23K256=m -CONFIG_MTD_SST25L=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTDRAM_TOTAL_SIZE=4096 -CONFIG_MTDRAM_ERASE_SIZE=128 -CONFIG_MTD_BLOCK2MTD=m - -# -# Disk-On-Chip Device Drivers -# -CONFIG_MTD_DOCG3=m -CONFIG_BCH_CONST_M=14 -CONFIG_BCH_CONST_T=4 -# end of Self-contained MTD device drivers - -CONFIG_MTD_NAND_CORE=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_GENERIC=m -# CONFIG_MTD_ONENAND_OTP is not set -CONFIG_MTD_ONENAND_2X_PROGRAM=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=m -# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set -CONFIG_MTD_RAW_NAND=m -# CONFIG_MTD_NAND_ECC_SW_BCH is not set - -# -# Raw/parallel NAND flash controllers -# -CONFIG_MTD_NAND_DENALI=m -CONFIG_MTD_NAND_DENALI_PCI=m -CONFIG_MTD_NAND_CAFE=m -CONFIG_MTD_NAND_MXIC=m -CONFIG_MTD_NAND_GPIO=m -CONFIG_MTD_NAND_PLATFORM=m - -# -# Misc -# -CONFIG_MTD_SM_COMMON=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_RICOH=m -CONFIG_MTD_NAND_DISKONCHIP=m -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set -CONFIG_MTD_SPI_NAND=m - -# -# LPDDR & LPDDR2 PCM memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m -# end of LPDDR & LPDDR2 PCM memory drivers - -CONFIG_MTD_SPI_NOR=m -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_SPI_INTEL_SPI=m -CONFIG_SPI_INTEL_SPI_PCI=m -CONFIG_SPI_INTEL_SPI_PLATFORM=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_FASTMAP=y -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_HYPERBUS=m -# CONFIG_OF is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_SERIAL=m -CONFIG_PARPORT_PC_FIFO=y -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_PC_PCMCIA=m -CONFIG_PARPORT_AX88796=m -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_PNP=y -# CONFIG_PNP_DEBUG_MESSAGES is not set - -# -# Protocols -# -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_NULL_BLK=m -CONFIG_BLK_DEV_FD=m -CONFIG_CDROM=y -CONFIG_PARIDE=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m -CONFIG_ZRAM=m -# CONFIG_ZRAM_WRITEBACK is not set -# CONFIG_ZRAM_MEMORY_TRACKING is not set -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SKD=m -CONFIG_BLK_DEV_SX8=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m -CONFIG_XEN_BLKDEV_FRONTEND=y -CONFIG_XEN_BLKDEV_BACKEND=m -CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_RBD=m -CONFIG_BLK_DEV_RSXX=m - -# -# NVME Support -# -CONFIG_NVME_CORE=y -CONFIG_BLK_DEV_NVME=y -# CONFIG_NVME_MULTIPATH is not set -CONFIG_NVME_HWMON=y -CONFIG_NVME_FABRICS=m -CONFIG_NVME_RDMA=m -CONFIG_NVME_FC=m -CONFIG_NVME_TCP=m -CONFIG_NVME_TARGET=m -CONFIG_NVME_TARGET_LOOP=m -CONFIG_NVME_TARGET_RDMA=m -CONFIG_NVME_TARGET_FC=m -CONFIG_NVME_TARGET_FCLOOP=m -CONFIG_NVME_TARGET_TCP=m -# end of NVME Support - -# -# Misc devices -# -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_AD525X_DPOT=m -CONFIG_AD525X_DPOT_I2C=m -CONFIG_AD525X_DPOT_SPI=m -CONFIG_DUMMY_IRQ=m -CONFIG_IBM_ASM=m -CONFIG_PHANTOM=m -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -CONFIG_HP_ILO=m -CONFIG_APDS9802ALS=m -CONFIG_ISL29003=m -CONFIG_ISL29020=m -CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1770=m -CONFIG_SENSORS_APDS990X=m -CONFIG_HMC6352=m -CONFIG_DS1682=m -CONFIG_VMWARE_BALLOON=m -CONFIG_LATTICE_ECP3_CONFIG=m -CONFIG_SRAM=y -# CONFIG_PCI_ENDPOINT_TEST is not set -CONFIG_XILINX_SDFEC=m -CONFIG_MISC_RTSX=m -CONFIG_PVPANIC=m -CONFIG_C2PORT=m -CONFIG_C2PORT_DURAMAR_2150=m - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_MAX6875=m -CONFIG_EEPROM_93CX6=m -CONFIG_EEPROM_93XX46=m -CONFIG_EEPROM_IDT_89HPESX=m -CONFIG_EEPROM_EE1004=m -# end of EEPROM support - -CONFIG_CB710_CORE=m -# CONFIG_CB710_DEBUG is not set -CONFIG_CB710_DEBUG_ASSUMPTIONS=y - -# -# Texas Instruments shared transport line discipline -# -CONFIG_TI_ST=m -# end of Texas Instruments shared transport line discipline - -CONFIG_SENSORS_LIS3_I2C=m -CONFIG_ALTERA_STAPL=m -# CONFIG_INTEL_MEI is not set -# CONFIG_INTEL_MEI_ME is not set -# CONFIG_INTEL_MEI_TXE is not set -# CONFIG_INTEL_MEI_HDCP is not set -CONFIG_VMWARE_VMCI=m - -# -# Intel MIC & related support -# -CONFIG_INTEL_MIC_BUS=m -CONFIG_SCIF_BUS=m -CONFIG_VOP_BUS=m -CONFIG_INTEL_MIC_HOST=m -CONFIG_INTEL_MIC_CARD=m -CONFIG_SCIF=m -CONFIG_MIC_COSM=m -CONFIG_VOP=m -# end of Intel MIC & related support - -CONFIG_GENWQE=m -CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0 -CONFIG_ECHO=m -CONFIG_MISC_ALCOR_PCI=m -CONFIG_MISC_RTSX_PCI=m -CONFIG_MISC_RTSX_USB=m -CONFIG_HABANA_AI=m -CONFIG_UACCE=m -# end of Misc devices - -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -CONFIG_SCSI_NETLINK=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SRP_ATTRS=m -# end of SCSI Transports - -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_SCSI_CXGB4_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2X_FCOE=m -CONFIG_BE2ISCSI=m -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_HPSA=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_3W_SAS=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=5000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -CONFIG_AIC79XX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_SCSI_MVSAS=m -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVSAS_TASKLET is not set -CONFIG_SCSI_MVUMI=m -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_ARCMSR=m -CONFIG_SCSI_ESAS2R=m -CONFIG_MEGARAID_NEWGEN=y -CONFIG_MEGARAID_MM=m -CONFIG_MEGARAID_MAILBOX=m -CONFIG_MEGARAID_LEGACY=m -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -CONFIG_SCSI_MPT2SAS=m -CONFIG_SCSI_SMARTPQI=m -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PCI=m -# CONFIG_SCSI_UFS_DWC_TC_PCI is not set -CONFIG_SCSI_UFSHCD_PLATFORM=m -CONFIG_SCSI_UFS_CDNS_PLATFORM=m -# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set -# CONFIG_SCSI_UFS_BSG is not set -CONFIG_SCSI_HPTIOP=m -CONFIG_SCSI_BUSLOGIC=m -CONFIG_SCSI_FLASHPOINT=y -CONFIG_SCSI_MYRB=m -CONFIG_SCSI_MYRS=m -CONFIG_VMWARE_PVSCSI=m -CONFIG_XEN_SCSI_FRONTEND=m -CONFIG_HYPERV_STORAGE=m -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -CONFIG_FCOE=m -CONFIG_FCOE_FNIC=m -CONFIG_SCSI_SNIC=m -# CONFIG_SCSI_SNIC_DEBUG_FS is not set -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_FDOMAIN=m -CONFIG_SCSI_FDOMAIN_PCI=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_ISCI=m -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_STEX=m -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -CONFIG_SCSI_IPR=m -CONFIG_SCSI_IPR_TRACE=y -CONFIG_SCSI_IPR_DUMP=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_QLA_FC=m -CONFIG_TCM_QLA2XXX=m -# CONFIG_TCM_QLA2XXX_DEBUG is not set -CONFIG_SCSI_QLA_ISCSI=m -CONFIG_QEDI=m -CONFIG_QEDF=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -CONFIG_SCSI_DC395x=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_WD719X=m -CONFIG_SCSI_DEBUG=m -CONFIG_SCSI_PMCRAID=m -CONFIG_SCSI_PM8001=m -CONFIG_SCSI_BFA_FC=m -CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_CHELSIO_FCOE=m -CONFIG_SCSI_LOWLEVEL_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -# end of SCSI device support - -CONFIG_ATA=y -CONFIG_SATA_HOST=y -CONFIG_PATA_TIMINGS=y -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_ATA_FORCE=y -CONFIG_ATA_ACPI=y -CONFIG_SATA_ZPODD=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -CONFIG_SATA_AHCI=m -CONFIG_SATA_MOBILE_LPM_POLICY=0 -CONFIG_SATA_AHCI_PLATFORM=m -CONFIG_SATA_INIC162X=m -CONFIG_SATA_ACARD_AHCI=m -CONFIG_SATA_SIL24=m -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -CONFIG_PDC_ADMA=m -CONFIG_SATA_QSTOR=m -CONFIG_SATA_SX4=m -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=y -CONFIG_SATA_DWC=m -# CONFIG_SATA_DWC_OLD_DMA is not set -# CONFIG_SATA_DWC_DEBUG is not set -CONFIG_SATA_MV=m -CONFIG_SATA_NV=m -CONFIG_SATA_PROMISE=m -CONFIG_SATA_SIL=m -CONFIG_SATA_SIS=m -CONFIG_SATA_SVW=m -CONFIG_SATA_ULI=m -CONFIG_SATA_VIA=m -CONFIG_SATA_VITESSE=m - -# -# PATA SFF controllers with BMDMA -# -CONFIG_PATA_ALI=m -CONFIG_PATA_AMD=m -CONFIG_PATA_ARTOP=m -CONFIG_PATA_ATIIXP=m -CONFIG_PATA_ATP867X=m -CONFIG_PATA_CMD64X=m -CONFIG_PATA_CYPRESS=m -CONFIG_PATA_EFAR=m -CONFIG_PATA_HPT366=m -CONFIG_PATA_HPT37X=m -CONFIG_PATA_HPT3X2N=m -CONFIG_PATA_HPT3X3=m -# CONFIG_PATA_HPT3X3_DMA is not set -CONFIG_PATA_IT8213=m -CONFIG_PATA_IT821X=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_MARVELL=m -CONFIG_PATA_NETCELL=m -CONFIG_PATA_NINJA32=m -CONFIG_PATA_NS87415=m -CONFIG_PATA_OLDPIIX=m -CONFIG_PATA_OPTIDMA=m -CONFIG_PATA_PDC2027X=m -CONFIG_PATA_PDC_OLD=m -CONFIG_PATA_RADISYS=m -CONFIG_PATA_RDC=m -CONFIG_PATA_SCH=m -CONFIG_PATA_SERVERWORKS=m -CONFIG_PATA_SIL680=m -CONFIG_PATA_SIS=y -CONFIG_PATA_TOSHIBA=m -CONFIG_PATA_TRIFLEX=m -CONFIG_PATA_VIA=m -CONFIG_PATA_WINBOND=m - -# -# PIO-only SFF controllers -# -CONFIG_PATA_CMD640_PCI=m -CONFIG_PATA_MPIIX=m -CONFIG_PATA_NS87410=m -CONFIG_PATA_OPTI=m -CONFIG_PATA_PCMCIA=m -CONFIG_PATA_PLATFORM=m -CONFIG_PATA_RZ1000=m - -# -# Generic fallback / legacy drivers -# -CONFIG_PATA_ACPI=m -CONFIG_ATA_GENERIC=y -CONFIG_PATA_LEGACY=m -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_AUTODETECT=y -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_MD_CLUSTER=m -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -CONFIG_DM_UNSTRIPED=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -CONFIG_DM_WRITECACHE=m -CONFIG_DM_ERA=m -CONFIG_DM_CLONE=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_DUST=m -# CONFIG_DM_INIT is not set -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -CONFIG_DM_INTEGRITY=m -CONFIG_DM_ZONED=m -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_TCM_USER2=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_TCM_FC=m -CONFIG_ISCSI_TARGET=m -CONFIG_ISCSI_TARGET_CXGB4=m -CONFIG_SBP_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_FUSION_LOGGING=y - -# -# IEEE 1394 (FireWire) support -# -CONFIG_FIREWIRE=m -CONFIG_FIREWIRE_OHCI=m -CONFIG_FIREWIRE_SBP2=m -CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_NOSY=m -# end of IEEE 1394 (FireWire) support - -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_MAC_EMUMOUSEBTN=m -CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_WIREGUARD=m -# CONFIG_WIREGUARD_DEBUG is not set -CONFIG_EQUALIZER=m -CONFIG_NET_FC=y -CONFIG_IFB=m -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN_L3S=y -CONFIG_IPVLAN=m -CONFIG_IPVTAP=m -CONFIG_VXLAN=m -CONFIG_GENEVE=m -CONFIG_BAREUDP=m -CONFIG_GTP=m -CONFIG_MACSEC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_NTB_NETDEV=m -CONFIG_RIONET=m -CONFIG_RIONET_TX_SIZE=128 -CONFIG_RIONET_RX_SIZE=128 -CONFIG_TUN=y -CONFIG_TAP=m -# CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m -CONFIG_VIRTIO_NET=y -CONFIG_NLMON=m -CONFIG_NET_VRF=m -CONFIG_VSOCKMON=m -CONFIG_SUNGEM_PHY=m -CONFIG_ARCNET=m -CONFIG_ARCNET_1201=m -CONFIG_ARCNET_1051=m -CONFIG_ARCNET_RAW=m -CONFIG_ARCNET_CAP=m -CONFIG_ARCNET_COM90xx=m -CONFIG_ARCNET_COM90xxIO=m -CONFIG_ARCNET_RIM_I=m -CONFIG_ARCNET_COM20020=m -CONFIG_ARCNET_COM20020_PCI=m -CONFIG_ARCNET_COM20020_CS=m -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -CONFIG_ATM_TCP=m -CONFIG_ATM_LANAI=m -CONFIG_ATM_ENI=m -# CONFIG_ATM_ENI_DEBUG is not set -# CONFIG_ATM_ENI_TUNE_BURST is not set -CONFIG_ATM_FIRESTREAM=m -CONFIG_ATM_ZATM=m -# CONFIG_ATM_ZATM_DEBUG is not set -CONFIG_ATM_NICSTAR=m -# CONFIG_ATM_NICSTAR_USE_SUNI is not set -# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set -CONFIG_ATM_IDT77252=m -# CONFIG_ATM_IDT77252_DEBUG is not set -# CONFIG_ATM_IDT77252_RCV_ALL is not set -CONFIG_ATM_IDT77252_USE_SUNI=y -CONFIG_ATM_AMBASSADOR=m -# CONFIG_ATM_AMBASSADOR_DEBUG is not set -CONFIG_ATM_HORIZON=m -# CONFIG_ATM_HORIZON_DEBUG is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -# CONFIG_ATM_FORE200E_USE_TASKLET is not set -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -CONFIG_ATM_HE=m -CONFIG_ATM_HE_USE_SUNI=y -CONFIG_ATM_SOLOS=m -CONFIG_CAIF_DRIVERS=y -CONFIG_CAIF_TTY=m -CONFIG_CAIF_SPI_SLAVE=m -# CONFIG_CAIF_SPI_SYNC is not set -CONFIG_CAIF_HSI=m -CONFIG_CAIF_VIRTIO=m - -# -# Distributed Switch Architecture drivers -# -CONFIG_B53=m -CONFIG_B53_SPI_DRIVER=m -CONFIG_B53_MDIO_DRIVER=m -CONFIG_B53_MMAP_DRIVER=m -CONFIG_B53_SRAB_DRIVER=m -CONFIG_B53_SERDES=m -CONFIG_NET_DSA_BCM_SF2=m -# CONFIG_NET_DSA_LOOP is not set -CONFIG_NET_DSA_LANTIQ_GSWIP=m -CONFIG_NET_DSA_MT7530=m -CONFIG_NET_DSA_MV88E6060=m -CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m -CONFIG_NET_DSA_MICROCHIP_KSZ9477=m -CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=m -CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m -CONFIG_NET_DSA_MICROCHIP_KSZ8795=m -CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI=m -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -# CONFIG_NET_DSA_MV88E6XXX_PTP is not set -CONFIG_NET_DSA_AR9331=m -CONFIG_NET_DSA_SJA1105=m -CONFIG_NET_DSA_SJA1105_PTP=y -# CONFIG_NET_DSA_SJA1105_TAS is not set -CONFIG_NET_DSA_QCA8K=m -CONFIG_NET_DSA_REALTEK_SMI=m -CONFIG_NET_DSA_SMSC_LAN9303=m -CONFIG_NET_DSA_SMSC_LAN9303_I2C=m -CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m -CONFIG_NET_DSA_VITESSE_VSC73XX=m -CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m -CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m -# end of Distributed Switch Architecture drivers - -CONFIG_ETHERNET=y -CONFIG_MDIO=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_3C589=m -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_NET_VENDOR_AGERE=y -CONFIG_ET131X=m -CONFIG_NET_VENDOR_ALACRITECH=y -CONFIG_SLICOSS=m -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_ALTERA_TSE=m -CONFIG_NET_VENDOR_AMAZON=y -CONFIG_ENA_ETHERNET=m -CONFIG_NET_VENDOR_AMD=y -CONFIG_AMD8111_ETH=m -CONFIG_PCNET32=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_AMD_XGBE=m -# CONFIG_AMD_XGBE_DCB is not set -CONFIG_AMD_XGBE_HAVE_ECC=y -CONFIG_NET_VENDOR_AQUANTIA=y -CONFIG_AQTION=m -CONFIG_NET_VENDOR_ARC=y -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_ATL2=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_ALX=m -CONFIG_NET_VENDOR_AURORA=y -CONFIG_AURORA_NB8800=m -CONFIG_NET_VENDOR_BROADCOM=y -CONFIG_B44=m -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y -CONFIG_BCMGENET=m -CONFIG_BNX2=m -CONFIG_CNIC=m -CONFIG_TIGON3=m -CONFIG_TIGON3_HWMON=y -CONFIG_BNX2X=m -CONFIG_BNX2X_SRIOV=y -# CONFIG_SYSTEMPORT is not set -CONFIG_BNXT=m -CONFIG_BNXT_SRIOV=y -CONFIG_BNXT_FLOWER_OFFLOAD=y -# CONFIG_BNXT_DCB is not set -CONFIG_BNXT_HWMON=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_BNA=m -CONFIG_NET_VENDOR_CADENCE=y -CONFIG_MACB=m -CONFIG_MACB_USE_HWSTAMP=y -CONFIG_MACB_PCI=m -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_THUNDER_NIC_PF=m -CONFIG_THUNDER_NIC_VF=m -CONFIG_THUNDER_NIC_BGX=m -CONFIG_THUNDER_NIC_RGX=m -CONFIG_CAVIUM_PTP=m -CONFIG_LIQUIDIO=m -CONFIG_LIQUIDIO_VF=m -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m -CONFIG_CHELSIO_T4_DCB=y -CONFIG_CHELSIO_T4_FCOE=y -CONFIG_CHELSIO_T4VF=m -CONFIG_CHELSIO_LIB=m -CONFIG_NET_VENDOR_CISCO=y -CONFIG_ENIC=m -# CONFIG_NET_VENDOR_CORTINA is not set -CONFIG_CX_ECAT=m -CONFIG_DNET=m -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_DE2104X_DSL=0 -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_NET_VENDOR_DLINK=y -CONFIG_DL2K=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_BE2NET=m -CONFIG_BE2NET_HWMON=y -CONFIG_BE2NET_BE2=y -CONFIG_BE2NET_BE3=y -CONFIG_BE2NET_LANCER=y -CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_EZCHIP=y -CONFIG_NET_VENDOR_FUJITSU=y -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_NET_VENDOR_GOOGLE=y -CONFIG_GVE=m -CONFIG_NET_VENDOR_HUAWEI=y -CONFIG_HINIC=m -CONFIG_NET_VENDOR_I825XX=y -CONFIG_NET_VENDOR_INTEL=y -CONFIG_E100=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_E1000E_HWTS=y -CONFIG_IGB=m -CONFIG_IGB_HWMON=y -CONFIG_IGB_DCA=y -CONFIG_IGBVF=m -CONFIG_IXGB=m -CONFIG_IXGBE=m -CONFIG_IXGBE_HWMON=y -CONFIG_IXGBE_DCA=y -CONFIG_IXGBE_DCB=y -CONFIG_IXGBE_IPSEC=y -CONFIG_IXGBEVF=m -CONFIG_IXGBEVF_IPSEC=y -CONFIG_I40E=m -CONFIG_I40E_DCB=y -CONFIG_IAVF=m -CONFIG_I40EVF=m -CONFIG_ICE=m -CONFIG_FM10K=m -CONFIG_IGC=m -CONFIG_JME=m -CONFIG_NET_VENDOR_MARVELL=y -CONFIG_MVMDIO=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKGE_GENESIS=y -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_DCB=y -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX4_CORE_GEN2=y -CONFIG_MLX5_CORE=m -# CONFIG_MLX5_FPGA is not set -CONFIG_MLX5_CORE_EN=y -CONFIG_MLX5_EN_ARFS=y -CONFIG_MLX5_EN_RXNFC=y -CONFIG_MLX5_MPFS=y -CONFIG_MLX5_ESWITCH=y -CONFIG_MLX5_CORE_EN_DCB=y -# CONFIG_MLX5_CORE_IPOIB is not set -CONFIG_MLX5_SW_STEERING=y -CONFIG_MLXSW_CORE=m -CONFIG_MLXSW_CORE_HWMON=y -CONFIG_MLXSW_CORE_THERMAL=y -CONFIG_MLXSW_PCI=m -CONFIG_MLXSW_I2C=m -CONFIG_MLXSW_SWITCHIB=m -CONFIG_MLXSW_SWITCHX2=m -CONFIG_MLXSW_SPECTRUM=m -CONFIG_MLXSW_SPECTRUM_DCB=y -CONFIG_MLXSW_MINIMAL=m -CONFIG_MLXFW=m -CONFIG_NET_VENDOR_MICREL=y -CONFIG_KS8842=m -CONFIG_KS8851=m -CONFIG_KS8851_MLL=m -CONFIG_KSZ884X_PCI=m -CONFIG_NET_VENDOR_MICROCHIP=y -CONFIG_ENC28J60=m -# CONFIG_ENC28J60_WRITEVERIFY is not set -CONFIG_ENCX24J600=m -CONFIG_LAN743X=m -CONFIG_NET_VENDOR_MICROSEMI=y -CONFIG_MSCC_OCELOT_SWITCH=m -CONFIG_NET_VENDOR_MYRI=y -CONFIG_MYRI10GE=m -CONFIG_MYRI10GE_DCA=y -CONFIG_FEALNX=m -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NATSEMI=m -CONFIG_NS83820=m -CONFIG_NET_VENDOR_NETERION=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set -CONFIG_NET_VENDOR_NETRONOME=y -CONFIG_NFP=m -# CONFIG_NFP_APP_FLOWER is not set -CONFIG_NFP_APP_ABM_NIC=y -# CONFIG_NFP_DEBUG is not set -CONFIG_NET_VENDOR_NI=y -CONFIG_NI_XGE_MANAGEMENT_ENET=m -CONFIG_NET_VENDOR_8390=y -CONFIG_PCMCIA_AXNET=m -CONFIG_NE2K_PCI=m -CONFIG_PCMCIA_PCNET=m -CONFIG_NET_VENDOR_NVIDIA=y -CONFIG_FORCEDETH=m -CONFIG_NET_VENDOR_OKI=y -CONFIG_ETHOC=m -CONFIG_NET_VENDOR_PACKET_ENGINES=y -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_NET_VENDOR_PENSANDO=y -CONFIG_IONIC=m -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_QLA3XXX=m -CONFIG_QLCNIC=m -CONFIG_QLCNIC_SRIOV=y -CONFIG_QLCNIC_DCB=y -CONFIG_QLCNIC_HWMON=y -CONFIG_NETXEN_NIC=m -CONFIG_QED=m -CONFIG_QED_LL2=y -CONFIG_QED_SRIOV=y -CONFIG_QEDE=m -CONFIG_QED_RDMA=y -CONFIG_QED_ISCSI=y -CONFIG_QED_FCOE=y -CONFIG_QED_OOO=y -CONFIG_NET_VENDOR_QUALCOMM=y -CONFIG_QCOM_EMAC=m -CONFIG_RMNET=m -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_ATP=m -CONFIG_8139CP=m -CONFIG_8139TOO=m -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R8169=m -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_ROCKER=y -CONFIG_ROCKER=m -CONFIG_NET_VENDOR_SAMSUNG=y -CONFIG_SXGBE_ETH=m -CONFIG_NET_VENDOR_SEEQ=y -CONFIG_NET_VENDOR_SOLARFLARE=y -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_SFC_MCDI_MON=y -CONFIG_SFC_SRIOV=y -CONFIG_SFC_MCDI_LOGGING=y -CONFIG_SFC_FALCON=m -CONFIG_SFC_FALCON_MTD=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -CONFIG_SIS900=m -CONFIG_SIS190=m -CONFIG_NET_VENDOR_SMSC=y -CONFIG_PCMCIA_SMC91C92=m -CONFIG_EPIC100=m -CONFIG_SMSC911X=m -CONFIG_SMSC9420=m -# CONFIG_NET_VENDOR_SOCIONEXT is not set -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_STMMAC_ETH=m -# CONFIG_STMMAC_SELFTESTS is not set -CONFIG_STMMAC_PLATFORM=m -CONFIG_DWMAC_GENERIC=m -CONFIG_DWMAC_INTEL=m -# CONFIG_STMMAC_PCI is not set -CONFIG_NET_VENDOR_SUN=y -CONFIG_HAPPYMEAL=m -CONFIG_SUNGEM=m -CONFIG_CASSINI=m -CONFIG_NIU=m -CONFIG_NET_VENDOR_SYNOPSYS=y -CONFIG_DWC_XLGMAC=m -CONFIG_DWC_XLGMAC_PCI=m -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_TEHUTI=m -CONFIG_NET_VENDOR_TI=y -# CONFIG_TI_CPSW_PHY_SEL is not set -CONFIG_TLAN=m -CONFIG_NET_VENDOR_VIA=y -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -CONFIG_VIA_VELOCITY=m -CONFIG_NET_VENDOR_WIZNET=y -CONFIG_WIZNET_W5100=m -CONFIG_WIZNET_W5300=m -# CONFIG_WIZNET_BUS_DIRECT is not set -# CONFIG_WIZNET_BUS_INDIRECT is not set -CONFIG_WIZNET_BUS_ANY=y -# CONFIG_WIZNET_W5100_SPI is not set -CONFIG_NET_VENDOR_XILINX=y -CONFIG_XILINX_AXI_EMAC=m -CONFIG_XILINX_LL_TEMAC=m -CONFIG_NET_VENDOR_XIRCOM=y -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -# CONFIG_HIPPI is not set -CONFIG_NET_SB1000=m -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BCM_UNIMAC=m -CONFIG_MDIO_BITBANG=m -CONFIG_MDIO_CAVIUM=m -CONFIG_MDIO_GPIO=m -CONFIG_MDIO_I2C=m -CONFIG_MDIO_MSCC_MIIM=m -CONFIG_MDIO_MVUSB=m -CONFIG_MDIO_THUNDER=m -CONFIG_MDIO_XPCS=m -CONFIG_PHYLINK=m -CONFIG_PHYLIB=y -CONFIG_SWPHY=y -# CONFIG_LED_TRIGGER_PHY is not set - -# -# MII PHY device drivers -# -CONFIG_SFP=m -CONFIG_ADIN_PHY=m -CONFIG_AMD_PHY=m -CONFIG_AQUANTIA_PHY=m -CONFIG_AX88796B_PHY=m -CONFIG_BCM7XXX_PHY=m -CONFIG_BCM87XX_PHY=m -CONFIG_BCM_NET_PHYLIB=m -CONFIG_BROADCOM_PHY=m -CONFIG_BCM84881_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_CORTINA_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_DP83822_PHY=m -CONFIG_DP83TC811_PHY=m -CONFIG_DP83848_PHY=m -CONFIG_DP83867_PHY=m -CONFIG_DP83869_PHY=m -CONFIG_FIXED_PHY=y -CONFIG_ICPLUS_PHY=m -CONFIG_INTEL_XWAY_PHY=m -CONFIG_LSI_ET1011C_PHY=m -CONFIG_LXT_PHY=m -CONFIG_MARVELL_PHY=m -CONFIG_MARVELL_10G_PHY=m -CONFIG_MICREL_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_MICROCHIP_T1_PHY=m -CONFIG_MICROSEMI_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_NXP_TJA11XX_PHY=m -CONFIG_AT803X_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_REALTEK_PHY=m -CONFIG_RENESAS_PHY=m -CONFIG_ROCKCHIP_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_STE10XP=m -CONFIG_TERANETICS_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_XILINX_GMII2RGMII=m -CONFIG_MICREL_KS8995MA=m -CONFIG_PLIP=m -CONFIG_PPP=y -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLHC=y -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_NET_DRIVERS=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET_ENABLE=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_CDC_PHONET=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m -CONFIG_USB_NET_AQC111=m -CONFIG_WLAN=y -# CONFIG_WIRELESS_WDS is not set -CONFIG_WLAN_VENDOR_ADMTEK=y -CONFIG_ADM8211=m -CONFIG_ATH_COMMON=m -CONFIG_WLAN_VENDOR_ATH=y -# CONFIG_ATH_DEBUG is not set -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -# CONFIG_ATH5K_TRACER is not set -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_COMMON_DEBUG=y -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -CONFIG_ATH9K_PCI=y -CONFIG_ATH9K_AHB=y -CONFIG_ATH9K_DEBUGFS=y -CONFIG_ATH9K_STATION_STATISTICS=y -# CONFIG_ATH9K_DYNACK is not set -CONFIG_ATH9K_WOW=y -CONFIG_ATH9K_RFKILL=y -CONFIG_ATH9K_CHANNEL_CONTEXT=y -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_PCI_NO_EEPROM=m -CONFIG_ATH9K_HTC=m -CONFIG_ATH9K_HTC_DEBUGFS=y -CONFIG_ATH9K_HWRNG=y -# CONFIG_ATH9K_COMMON_SPECTRAL is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -# CONFIG_CARL9170_DEBUGFS is not set -CONFIG_CARL9170_WPC=y -CONFIG_CARL9170_HWRNG=y -CONFIG_ATH6KL=m -CONFIG_ATH6KL_SDIO=m -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m -CONFIG_WIL6210=m -CONFIG_WIL6210_ISR_COR=y -CONFIG_WIL6210_TRACING=y -CONFIG_WIL6210_DEBUGFS=y -CONFIG_ATH10K=m -CONFIG_ATH10K_CE=y -CONFIG_ATH10K_PCI=m -CONFIG_ATH10K_SDIO=m -CONFIG_ATH10K_USB=m -# CONFIG_ATH10K_DEBUG is not set -CONFIG_ATH10K_DEBUGFS=y -# CONFIG_ATH10K_SPECTRAL is not set -CONFIG_ATH10K_TRACING=y -CONFIG_WCN36XX=m -# CONFIG_WCN36XX_DEBUGFS is not set -CONFIG_WLAN_VENDOR_ATMEL=y -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_AT76C50X_USB=m -CONFIG_WLAN_VENDOR_BROADCOM=y -CONFIG_B43=m -CONFIG_B43_BCMA=y -CONFIG_B43_SSB=y -CONFIG_B43_BUSES_BCMA_AND_SSB=y -# CONFIG_B43_BUSES_BCMA is not set -# CONFIG_B43_BUSES_SSB is not set -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -# CONFIG_B43_SDIO is not set -CONFIG_B43_BCMA_PIO=y -CONFIG_B43_PIO=y -CONFIG_B43_PHY_G=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_HT=y -CONFIG_B43_LEDS=y -CONFIG_B43_HWRNG=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_HWRNG=y -# CONFIG_B43LEGACY_DEBUG is not set -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_BRCMUTIL=m -CONFIG_BRCMSMAC=m -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -CONFIG_BRCMFMAC_PROTO_MSGBUF=y -CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_USB=y -CONFIG_BRCMFMAC_PCIE=y -CONFIG_BRCM_TRACING=y -# CONFIG_BRCMDBG is not set -CONFIG_WLAN_VENDOR_CISCO=y -CONFIG_AIRO=m -CONFIG_AIRO_CS=m -CONFIG_WLAN_VENDOR_INTEL=y -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2100_DEBUG is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m - -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -CONFIG_IWLEGACY_DEBUGFS=y -# end of iwl3945 / iwl4965 Debugging Options - -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -CONFIG_IWLDVM=m -CONFIG_IWLMVM=m -CONFIG_IWLWIFI_OPMODE_MODULAR=y -# CONFIG_IWLWIFI_BCAST_FILTERING is not set - -# -# Debugging Options -# -# CONFIG_IWLWIFI_DEBUG is not set -CONFIG_IWLWIFI_DEBUGFS=y -CONFIG_IWLWIFI_DEVICE_TRACING=y -# end of Debugging Options - -CONFIG_WLAN_VENDOR_INTERSIL=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m -CONFIG_HERMES=m -# CONFIG_HERMES_PRISM is not set -CONFIG_HERMES_CACHE_FW_ON_INIT=y -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -CONFIG_ORINOCO_USB=m -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -CONFIG_P54_SPI=m -# CONFIG_P54_SPI_DEFAULT_EEPROM is not set -CONFIG_P54_LEDS=y -# CONFIG_PRISM54 is not set -CONFIG_WLAN_VENDOR_MARVELL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_SPI=m -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_MWIFIEX_PCIE=m -CONFIG_MWIFIEX_USB=m -CONFIG_MWL8K=m -CONFIG_WLAN_VENDOR_MEDIATEK=y -CONFIG_MT7601U=m -# CONFIG_MT76x0U is not set -# CONFIG_MT76x0E is not set -# CONFIG_MT76x2E is not set -# CONFIG_MT76x2U is not set -# CONFIG_MT7603E is not set -# CONFIG_MT7615E is not set -CONFIG_WLAN_VENDOR_RALINK=y -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y -CONFIG_RT2800PCI_RT3290=y -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RT2800_LIB=m -CONFIG_RT2800_LIB_MMIO=m -CONFIG_RT2X00_LIB_MMIO=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_LIB_DEBUGFS is not set -# CONFIG_RT2X00_DEBUG is not set -CONFIG_WLAN_VENDOR_REALTEK=y -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m -CONFIG_RTL8723AE=m -CONFIG_RTL8723BE=m -CONFIG_RTL8188EE=m -CONFIG_RTL8192EE=m -CONFIG_RTL8821AE=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_PCI=m -CONFIG_RTLWIFI_USB=m -# CONFIG_RTLWIFI_DEBUG is not set -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8723_COMMON=m -CONFIG_RTLBTCOEXIST=m -CONFIG_RTL8XXXU=m -CONFIG_RTL8XXXU_UNTESTED=y -# CONFIG_RTW88 is not set -CONFIG_WLAN_VENDOR_RSI=y -CONFIG_RSI_91X=m -# CONFIG_RSI_DEBUGFS is not set -CONFIG_RSI_SDIO=m -CONFIG_RSI_USB=m -CONFIG_RSI_COEX=y -CONFIG_WLAN_VENDOR_ST=y -CONFIG_CW1200=m -CONFIG_CW1200_WLAN_SDIO=m -CONFIG_CW1200_WLAN_SPI=m -CONFIG_WLAN_VENDOR_TI=y -CONFIG_WL1251=m -CONFIG_WL1251_SPI=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SDIO=m -CONFIG_WILINK_PLATFORM_DATA=y -CONFIG_WLAN_VENDOR_ZYDAS=y -CONFIG_USB_ZD1201=m -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_WLAN_VENDOR_QUANTENNA=y -CONFIG_QTNFMAC=m -CONFIG_QTNFMAC_PCIE=m -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_WL3501=m -CONFIG_MAC80211_HWSIM=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_VIRT_WIFI=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 -# end of WiMAX Wireless Broadband devices - -CONFIG_WAN=y -CONFIG_LANMEDIA=m -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m -CONFIG_HDLC_X25=m -CONFIG_PCI200SYN=m -CONFIG_WANXL=m -CONFIG_PC300TOO=m -CONFIG_FARSYNC=m -CONFIG_DLCI=m -CONFIG_DLCI_MAX=8 -CONFIG_LAPBETHER=m -CONFIG_X25_ASY=m -CONFIG_SBNI=m -# CONFIG_SBNI_MULTILINE is not set -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKELB=m -CONFIG_IEEE802154_AT86RF230=m -CONFIG_IEEE802154_AT86RF230_DEBUGFS=y -CONFIG_IEEE802154_MRF24J40=m -CONFIG_IEEE802154_CC2520=m -CONFIG_IEEE802154_ATUSB=m -CONFIG_IEEE802154_ADF7242=m -CONFIG_IEEE802154_CA8210=m -# CONFIG_IEEE802154_CA8210_DEBUGFS is not set -CONFIG_IEEE802154_MCR20A=m -# CONFIG_IEEE802154_HWSIM is not set -CONFIG_XEN_NETDEV_FRONTEND=y -CONFIG_XEN_NETDEV_BACKEND=m -CONFIG_VMXNET3=m -CONFIG_FUJITSU_ES=m -CONFIG_USB4_NET=m -CONFIG_HYPERV_NET=m -CONFIG_NETDEVSIM=m -CONFIG_NET_FAILOVER=y -CONFIG_ISDN=y -CONFIG_ISDN_CAPI=y -CONFIG_CAPI_TRACE=y -CONFIG_ISDN_CAPI_MIDDLEWARE=y -CONFIG_MISDN=m -CONFIG_MISDN_DSP=m -CONFIG_MISDN_L1OIP=m - -# -# mISDN hardware drivers -# -CONFIG_MISDN_HFCPCI=m -CONFIG_MISDN_HFCMULTI=m -CONFIG_MISDN_HFCUSB=m -CONFIG_MISDN_AVMFRITZ=m -CONFIG_MISDN_SPEEDFAX=m -CONFIG_MISDN_INFINEON=m -CONFIG_MISDN_W6692=m -CONFIG_MISDN_NETJET=m -CONFIG_MISDN_HDLC=m -CONFIG_MISDN_IPAC=m -CONFIG_MISDN_ISAR=m -CONFIG_NVM=y -CONFIG_NVM_PBLK=m -# CONFIG_NVM_PBLK_DEBUG is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=m -CONFIG_INPUT_FF_MEMLESS=m -CONFIG_INPUT_POLLDEV=m -CONFIG_INPUT_SPARSEKMAP=m -CONFIG_INPUT_MATRIXKMAP=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ADC=m -CONFIG_KEYBOARD_ADP5520=m -CONFIG_KEYBOARD_ADP5588=m -CONFIG_KEYBOARD_ADP5589=m -CONFIG_KEYBOARD_APPLESPI=m -CONFIG_KEYBOARD_ATKBD=y -CONFIG_KEYBOARD_QT1050=m -CONFIG_KEYBOARD_QT1070=m -CONFIG_KEYBOARD_QT2160=m -CONFIG_KEYBOARD_DLINK_DIR685=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_GPIO_POLLED=m -CONFIG_KEYBOARD_TCA6416=m -CONFIG_KEYBOARD_TCA8418=m -CONFIG_KEYBOARD_MATRIX=m -CONFIG_KEYBOARD_LM8323=m -CONFIG_KEYBOARD_LM8333=m -CONFIG_KEYBOARD_MAX7359=m -CONFIG_KEYBOARD_MCS=m -CONFIG_KEYBOARD_MPR121=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_OPENCORES=m -CONFIG_KEYBOARD_SAMSUNG=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_IQS62X=m -CONFIG_KEYBOARD_TM2_TOUCHKEY=m -CONFIG_KEYBOARD_TWL4030=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_KEYBOARD_CROS_EC=m -CONFIG_KEYBOARD_MTK_PMIC=m -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_BYD=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y -CONFIG_MOUSE_PS2_SENTELIC=y -CONFIG_MOUSE_PS2_TOUCHKIT=y -CONFIG_MOUSE_PS2_FOCALTECH=y -CONFIG_MOUSE_PS2_VMMOUSE=y -CONFIG_MOUSE_PS2_SMBUS=y -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_BCM5974=m -CONFIG_MOUSE_CYAPA=m -CONFIG_MOUSE_ELAN_I2C=m -CONFIG_MOUSE_ELAN_I2C_I2C=y -CONFIG_MOUSE_ELAN_I2C_SMBUS=y -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=m -CONFIG_JOYSTICK_IFORCE_232=m -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_TWIDJOY=m -CONFIG_JOYSTICK_ZHENHUA=m -CONFIG_JOYSTICK_DB9=m -CONFIG_JOYSTICK_GAMECON=m -CONFIG_JOYSTICK_TURBOGRAFX=m -CONFIG_JOYSTICK_AS5011=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_JOYSTICK_XPAD=m -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -CONFIG_JOYSTICK_WALKERA0701=m -CONFIG_JOYSTICK_PSXPAD_SPI=m -# CONFIG_JOYSTICK_PSXPAD_SPI_FF is not set -CONFIG_JOYSTICK_PXRC=m -CONFIG_JOYSTICK_FSIA6B=m -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_USB_PEGASUS=m -CONFIG_TABLET_SERIAL_WACOM4=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_88PM860X=m -CONFIG_TOUCHSCREEN_ADS7846=m -CONFIG_TOUCHSCREEN_AD7877=m -CONFIG_TOUCHSCREEN_AD7879=m -CONFIG_TOUCHSCREEN_AD7879_I2C=m -CONFIG_TOUCHSCREEN_AD7879_SPI=m -CONFIG_TOUCHSCREEN_ADC=m -CONFIG_TOUCHSCREEN_ATMEL_MXT=m -# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set -CONFIG_TOUCHSCREEN_AUO_PIXCIR=m -CONFIG_TOUCHSCREEN_BU21013=m -CONFIG_TOUCHSCREEN_BU21029=m -CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m -CONFIG_TOUCHSCREEN_CY8CTMG110=m -CONFIG_TOUCHSCREEN_CYTTSP_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP_SPI=m -CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m -CONFIG_TOUCHSCREEN_DA9034=m -CONFIG_TOUCHSCREEN_DA9052=m -CONFIG_TOUCHSCREEN_DYNAPRO=m -CONFIG_TOUCHSCREEN_HAMPSHIRE=m -CONFIG_TOUCHSCREEN_EETI=m -CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m -CONFIG_TOUCHSCREEN_EXC3000=m -CONFIG_TOUCHSCREEN_FUJITSU=m -CONFIG_TOUCHSCREEN_GOODIX=m -CONFIG_TOUCHSCREEN_HIDEEP=m -CONFIG_TOUCHSCREEN_ILI210X=m -CONFIG_TOUCHSCREEN_S6SY761=m -CONFIG_TOUCHSCREEN_GUNZE=m -CONFIG_TOUCHSCREEN_EKTF2127=m -CONFIG_TOUCHSCREEN_ELAN=m -CONFIG_TOUCHSCREEN_ELO=m -CONFIG_TOUCHSCREEN_WACOM_W8001=m -CONFIG_TOUCHSCREEN_WACOM_I2C=m -CONFIG_TOUCHSCREEN_MAX11801=m -CONFIG_TOUCHSCREEN_MCS5000=m -CONFIG_TOUCHSCREEN_MMS114=m -CONFIG_TOUCHSCREEN_MELFAS_MIP4=m -CONFIG_TOUCHSCREEN_MTOUCH=m -CONFIG_TOUCHSCREEN_INEXIO=m -CONFIG_TOUCHSCREEN_MK712=m -CONFIG_TOUCHSCREEN_PENMOUNT=m -CONFIG_TOUCHSCREEN_EDT_FT5X06=m -CONFIG_TOUCHSCREEN_TOUCHRIGHT=m -CONFIG_TOUCHSCREEN_TOUCHWIN=m -CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m -CONFIG_TOUCHSCREEN_UCB1400=m -CONFIG_TOUCHSCREEN_PIXCIR=m -CONFIG_TOUCHSCREEN_WDT87XX_I2C=m -CONFIG_TOUCHSCREEN_WM831X=m -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_TOUCHSCREEN_MC13783=m -CONFIG_TOUCHSCREEN_USB_EGALAX=y -CONFIG_TOUCHSCREEN_USB_PANJIT=y -CONFIG_TOUCHSCREEN_USB_3M=y -CONFIG_TOUCHSCREEN_USB_ITM=y -CONFIG_TOUCHSCREEN_USB_ETURBO=y -CONFIG_TOUCHSCREEN_USB_GUNZE=y -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y -CONFIG_TOUCHSCREEN_USB_GOTOP=y -CONFIG_TOUCHSCREEN_USB_JASTEC=y -CONFIG_TOUCHSCREEN_USB_ELO=y -CONFIG_TOUCHSCREEN_USB_E2I=y -CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y -CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y -CONFIG_TOUCHSCREEN_USB_NEXIO=y -CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y -CONFIG_TOUCHSCREEN_TOUCHIT213=m -CONFIG_TOUCHSCREEN_TSC_SERIO=m -CONFIG_TOUCHSCREEN_TSC200X_CORE=m -CONFIG_TOUCHSCREEN_TSC2004=m -CONFIG_TOUCHSCREEN_TSC2005=m -CONFIG_TOUCHSCREEN_TSC2007=m -# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set -CONFIG_TOUCHSCREEN_PCAP=m -CONFIG_TOUCHSCREEN_RM_TS=m -CONFIG_TOUCHSCREEN_SILEAD=m -CONFIG_TOUCHSCREEN_SIS_I2C=m -CONFIG_TOUCHSCREEN_ST1232=m -CONFIG_TOUCHSCREEN_STMFTS=m -CONFIG_TOUCHSCREEN_SUR40=m -CONFIG_TOUCHSCREEN_SURFACE3_SPI=m -CONFIG_TOUCHSCREEN_SX8654=m -CONFIG_TOUCHSCREEN_TPS6507X=m -CONFIG_TOUCHSCREEN_ZET6223=m -CONFIG_TOUCHSCREEN_ZFORCE=m -CONFIG_TOUCHSCREEN_ROHM_BU21023=m -CONFIG_TOUCHSCREEN_IQS5XX=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_88PM860X_ONKEY=m -CONFIG_INPUT_88PM80X_ONKEY=m -CONFIG_INPUT_AD714X=m -CONFIG_INPUT_AD714X_I2C=m -CONFIG_INPUT_AD714X_SPI=m -CONFIG_INPUT_ARIZONA_HAPTICS=m -CONFIG_INPUT_BMA150=m -CONFIG_INPUT_E3X0_BUTTON=m -CONFIG_INPUT_MSM_VIBRATOR=m -CONFIG_INPUT_PCSPKR=m -CONFIG_INPUT_MAX77693_HAPTIC=m -CONFIG_INPUT_MAX8925_ONKEY=m -CONFIG_INPUT_MAX8997_HAPTIC=m -CONFIG_INPUT_MC13783_PWRBUTTON=m -CONFIG_INPUT_MMA8450=m -CONFIG_INPUT_APANEL=m -CONFIG_INPUT_GP2A=m -CONFIG_INPUT_GPIO_BEEPER=m -CONFIG_INPUT_GPIO_DECODER=m -CONFIG_INPUT_GPIO_VIBRA=m -CONFIG_INPUT_ATLAS_BTNS=m -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -CONFIG_INPUT_KXTJ9=m -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -CONFIG_INPUT_REGULATOR_HAPTIC=m -CONFIG_INPUT_RETU_PWRBUTTON=m -CONFIG_INPUT_AXP20X_PEK=m -CONFIG_INPUT_TWL4030_PWRBUTTON=m -CONFIG_INPUT_TWL4030_VIBRA=m -CONFIG_INPUT_TWL6040_VIBRA=m -CONFIG_INPUT_UINPUT=y -CONFIG_INPUT_PALMAS_PWRBUTTON=m -CONFIG_INPUT_PCF50633_PMU=m -CONFIG_INPUT_PCF8574=m -CONFIG_INPUT_PWM_BEEPER=m -CONFIG_INPUT_PWM_VIBRA=m -CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -CONFIG_INPUT_DA9052_ONKEY=m -CONFIG_INPUT_DA9055_ONKEY=m -CONFIG_INPUT_DA9063_ONKEY=m -CONFIG_INPUT_WM831X_ON=m -CONFIG_INPUT_PCAP=m -CONFIG_INPUT_ADXL34X=m -CONFIG_INPUT_ADXL34X_I2C=m -CONFIG_INPUT_ADXL34X_SPI=m -CONFIG_INPUT_IMS_PCU=m -CONFIG_INPUT_CMA3000=m -CONFIG_INPUT_CMA3000_I2C=m -CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m -CONFIG_INPUT_IDEAPAD_SLIDEBAR=m -CONFIG_INPUT_SOC_BUTTON_ARRAY=m -CONFIG_INPUT_DRV260X_HAPTICS=m -CONFIG_INPUT_DRV2665_HAPTICS=m -CONFIG_INPUT_DRV2667_HAPTICS=m -CONFIG_INPUT_RAVE_SP_PWRBUTTON=m -CONFIG_RMI4_CORE=m -CONFIG_RMI4_I2C=m -CONFIG_RMI4_SPI=m -CONFIG_RMI4_SMB=m -CONFIG_RMI4_F03=y -CONFIG_RMI4_F03_SERIO=m -CONFIG_RMI4_2D_SENSOR=y -CONFIG_RMI4_F11=y -CONFIG_RMI4_F12=y -CONFIG_RMI4_F30=y -# CONFIG_RMI4_F34 is not set -# CONFIG_RMI4_F54 is not set -CONFIG_RMI4_F55=y - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_CT82C710=m -CONFIG_SERIO_PARKBD=m -CONFIG_SERIO_PCIPS2=m -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=m -CONFIG_SERIO_ALTERA_PS2=m -CONFIG_SERIO_PS2MULT=m -CONFIG_SERIO_ARC_PS2=m -CONFIG_HYPERV_KEYBOARD=m -CONFIG_SERIO_GPIO_PS2=m -CONFIG_USERIO=m -CONFIG_GAMEPORT=m -CONFIG_GAMEPORT_NS558=m -CONFIG_GAMEPORT_L4=m -CONFIG_GAMEPORT_EMU10K1=m -CONFIG_GAMEPORT_FM801=m -# end of Hardware I/O ports -# end of Input device support - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=0 -CONFIG_LDISC_AUTOLOAD=y - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_PNP=y -# CONFIG_SERIAL_8250_16550A_VARIANTS is not set -# CONFIG_SERIAL_8250_FINTEK is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_EXAR=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_MEN_MCB=m -CONFIG_SERIAL_8250_NR_UARTS=48 -CONFIG_SERIAL_8250_RUNTIME_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_8250_DWLIB=y -CONFIG_SERIAL_8250_DW=m -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_8250_LPSS=m -CONFIG_SERIAL_8250_MID=m - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_KGDB_NMI=y -CONFIG_SERIAL_MAX3100=m -CONFIG_SERIAL_MAX310X=y -CONFIG_SERIAL_UARTLITE=m -CONFIG_SERIAL_UARTLITE_NR_UARTS=1 -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_CONSOLE_POLL=y -CONFIG_SERIAL_JSM=m -CONFIG_SERIAL_SCCNXP=y -CONFIG_SERIAL_SCCNXP_CONSOLE=y -CONFIG_SERIAL_SC16IS7XX_CORE=m -CONFIG_SERIAL_SC16IS7XX=m -CONFIG_SERIAL_SC16IS7XX_I2C=y -CONFIG_SERIAL_SC16IS7XX_SPI=y -CONFIG_SERIAL_ALTERA_JTAGUART=m -CONFIG_SERIAL_ALTERA_UART=m -CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 -CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 -# CONFIG_SERIAL_IFX6X60 is not set -CONFIG_SERIAL_ARC=m -CONFIG_SERIAL_ARC_NR_PORTS=1 -CONFIG_SERIAL_RP2=m -CONFIG_SERIAL_RP2_NR_UARTS=32 -CONFIG_SERIAL_FSL_LPUART=m -CONFIG_SERIAL_FSL_LINFLEXUART=m -CONFIG_SERIAL_MEN_Z135=m -# CONFIG_SERIAL_SPRD is not set -# end of Serial drivers - -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -# CONFIG_CYZ_INTR is not set -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_SYNCLINK_GT=m -CONFIG_ISI=m -CONFIG_N_HDLC=m -CONFIG_N_GSM=m -CONFIG_NOZOMI=m -CONFIG_NULL_TTY=m -CONFIG_TRACE_ROUTER=m -CONFIG_TRACE_SINK=m -CONFIG_HVC_DRIVER=y -CONFIG_HVC_IRQ=y -CONFIG_HVC_XEN=y -CONFIG_HVC_XEN_FRONTEND=y -CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y -CONFIG_TTY_PRINTK=y -CONFIG_TTY_PRINTK_LEVEL=6 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -CONFIG_PPDEV=m -CONFIG_VIRTIO_CONSOLE=y -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DMI_DECODE=y -CONFIG_IPMI_PLAT_DATA=y -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_SSIF=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_IPMB_DEVICE_INTERFACE=m -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=m -CONFIG_HW_RANDOM_INTEL=m -CONFIG_HW_RANDOM_AMD=m -CONFIG_HW_RANDOM_VIA=m -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_APPLICOM=m - -# -# PCMCIA character devices -# -CONFIG_SYNCLINK_CS=m -CONFIG_CARDMAN_4000=m -CONFIG_CARDMAN_4040=m -CONFIG_SCR24X=m -CONFIG_IPWIRELESS=m -# end of PCMCIA character devices - -CONFIG_MWAVE=m -CONFIG_DEVMEM=y -# CONFIG_DEVKMEM is not set -CONFIG_NVRAM=m -CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 -CONFIG_DEVPORT=y -CONFIG_HPET=y -CONFIG_HPET_MMAP=y -CONFIG_HPET_MMAP_DEFAULT=y -CONFIG_HANGCHECK_TIMER=m -CONFIG_TCG_TPM=y -CONFIG_HW_RANDOM_TPM=y -CONFIG_TCG_TIS_CORE=y -CONFIG_TCG_TIS=y -CONFIG_TCG_TIS_SPI=m -# CONFIG_TCG_TIS_SPI_CR50 is not set -CONFIG_TCG_TIS_I2C_ATMEL=m -CONFIG_TCG_TIS_I2C_INFINEON=m -CONFIG_TCG_TIS_I2C_NUVOTON=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_TCG_INFINEON=m -CONFIG_TCG_XEN=m -CONFIG_TCG_CRB=y -CONFIG_TCG_VTPM_PROXY=m -CONFIG_TCG_TIS_ST33ZP24=m -CONFIG_TCG_TIS_ST33ZP24_I2C=m -CONFIG_TCG_TIS_ST33ZP24_SPI=m -CONFIG_TELCLOCK=m -CONFIG_XILLYBUS=m -CONFIG_XILLYBUS_PCIE=m -# end of Character devices - -# CONFIG_RANDOM_TRUST_CPU is not set -# CONFIG_RANDOM_TRUST_BOOTLOADER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_ACPI_I2C_OPREGION=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MUX=m - -# -# Multiplexer I2C Chip support -# -CONFIG_I2C_MUX_GPIO=m -CONFIG_I2C_MUX_LTC4306=m -CONFIG_I2C_MUX_PCA9541=m -CONFIG_I2C_MUX_PCA954x=m -CONFIG_I2C_MUX_REG=m -CONFIG_I2C_MUX_MLXCPLD=m -# end of Multiplexer I2C Chip support - -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_SMBUS=m -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI1563=m -CONFIG_I2C_ALI15X3=m -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD756_S4882=m -CONFIG_I2C_AMD8111=m -CONFIG_I2C_AMD_MP2=m -CONFIG_I2C_I801=m -CONFIG_I2C_ISCH=m -CONFIG_I2C_ISMT=m -CONFIG_I2C_PIIX4=m -CONFIG_I2C_CHT_WC=m -CONFIG_I2C_NFORCE2=m -CONFIG_I2C_NFORCE2_S4985=m -CONFIG_I2C_NVIDIA_GPU=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS96X=m -CONFIG_I2C_VIA=m -CONFIG_I2C_VIAPRO=m - -# -# ACPI drivers -# -CONFIG_I2C_SCMI=m - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_CBUS_GPIO=m -CONFIG_I2C_DESIGNWARE_CORE=y -CONFIG_I2C_DESIGNWARE_PLATFORM=y -# CONFIG_I2C_DESIGNWARE_SLAVE is not set -CONFIG_I2C_DESIGNWARE_PCI=m -CONFIG_I2C_DESIGNWARE_BAYTRAIL=y -CONFIG_I2C_EMEV2=m -CONFIG_I2C_GPIO=m -# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set -CONFIG_I2C_KEMPLD=m -CONFIG_I2C_OCORES=m -CONFIG_I2C_PCA_PLATFORM=m -CONFIG_I2C_SIMTEC=m -CONFIG_I2C_XILINX=m - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_DIOLAN_U2C=m -CONFIG_I2C_DLN2=m -CONFIG_I2C_PARPORT=m -CONFIG_I2C_ROBOTFUZZ_OSIF=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m -CONFIG_I2C_VIPERBOARD=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_MLXCPLD=m -CONFIG_I2C_CROS_EC_TUNNEL=m -# end of I2C Hardware Bus support - -CONFIG_I2C_STUB=m -CONFIG_I2C_SLAVE=y -CONFIG_I2C_SLAVE_EEPROM=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# end of I2C support - -CONFIG_I3C=m -CONFIG_CDNS_I3C_MASTER=m -CONFIG_DW_I3C_MASTER=m -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_ALTERA=m -CONFIG_SPI_AXI_SPI_ENGINE=m -CONFIG_SPI_BITBANG=m -CONFIG_SPI_BUTTERFLY=m -CONFIG_SPI_CADENCE=m -CONFIG_SPI_DESIGNWARE=m -CONFIG_SPI_DW_PCI=m -CONFIG_SPI_DW_MID_DMA=y -CONFIG_SPI_DW_MMIO=m -CONFIG_SPI_DLN2=m -CONFIG_SPI_NXP_FLEXSPI=m -CONFIG_SPI_GPIO=m -CONFIG_SPI_LM70_LLP=m -CONFIG_SPI_OC_TINY=m -CONFIG_SPI_PXA2XX=m -CONFIG_SPI_PXA2XX_PCI=m -CONFIG_SPI_ROCKCHIP=m -CONFIG_SPI_SC18IS602=m -CONFIG_SPI_SIFIVE=m -CONFIG_SPI_MXIC=m -CONFIG_SPI_XCOMM=m -# CONFIG_SPI_XILINX is not set -CONFIG_SPI_ZYNQMP_GQSPI=m - -# -# SPI Multiplexer support -# -CONFIG_SPI_MUX=m - -# -# SPI Protocol Masters -# -CONFIG_SPI_SPIDEV=m -# CONFIG_SPI_LOOPBACK_TEST is not set -CONFIG_SPI_TLE62X0=m -# CONFIG_SPI_SLAVE is not set -CONFIG_SPMI=m -CONFIG_HSI=m -CONFIG_HSI_BOARDINFO=y - -# -# HSI controllers -# - -# -# HSI clients -# -CONFIG_HSI_CHAR=m -CONFIG_PPS=m -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -CONFIG_PPS_CLIENT_GPIO=m - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=m - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -CONFIG_PTP_1588_CLOCK_KVM=m -CONFIG_PTP_1588_CLOCK_IDT82P33=m -CONFIG_PTP_1588_CLOCK_IDTCM=m -# CONFIG_PTP_1588_CLOCK_VMW is not set -# end of PTP clock support - -CONFIG_PINCTRL=y -CONFIG_PINMUX=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AMD=y -# CONFIG_PINCTRL_DA9062 is not set -CONFIG_PINCTRL_MCP23S08=m -CONFIG_PINCTRL_SX150X=y -CONFIG_PINCTRL_BAYTRAIL=y -CONFIG_PINCTRL_CHERRYVIEW=m -CONFIG_PINCTRL_LYNXPOINT=m -CONFIG_PINCTRL_INTEL=m -CONFIG_PINCTRL_BROXTON=m -CONFIG_PINCTRL_CANNONLAKE=m -CONFIG_PINCTRL_CEDARFORK=m -CONFIG_PINCTRL_DENVERTON=m -CONFIG_PINCTRL_GEMINILAKE=m -CONFIG_PINCTRL_ICELAKE=m -CONFIG_PINCTRL_LEWISBURG=m -CONFIG_PINCTRL_SUNRISEPOINT=m -CONFIG_PINCTRL_TIGERLAKE=m -CONFIG_PINCTRL_MADERA=m -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_FASTPATH_LIMIT=512 -CONFIG_GPIO_ACPI=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=m -CONFIG_GPIO_MAX730X=m - -# -# Memory mapped GPIO drivers -# -CONFIG_GPIO_AMDPT=m -CONFIG_GPIO_DWAPB=m -CONFIG_GPIO_EXAR=m -CONFIG_GPIO_GENERIC_PLATFORM=m -CONFIG_GPIO_ICH=m -CONFIG_GPIO_MB86S7X=m -CONFIG_GPIO_MENZ127=m -CONFIG_GPIO_VX855=m -CONFIG_GPIO_XILINX=m -CONFIG_GPIO_AMD_FCH=m -# end of Memory mapped GPIO drivers - -# -# Port-mapped I/O GPIO drivers -# -CONFIG_GPIO_F7188X=m -CONFIG_GPIO_IT87=m -CONFIG_GPIO_SCH=m -CONFIG_GPIO_SCH311X=m -CONFIG_GPIO_WINBOND=m -CONFIG_GPIO_WS16C48=m -# end of Port-mapped I/O GPIO drivers - -# -# I2C GPIO expanders -# -CONFIG_GPIO_ADP5588=m -CONFIG_GPIO_MAX7300=m -CONFIG_GPIO_MAX732X=m -CONFIG_GPIO_PCA953X=m -CONFIG_GPIO_PCF857X=m -CONFIG_GPIO_TPIC2810=m -# end of I2C GPIO expanders - -# -# MFD GPIO expanders -# -CONFIG_GPIO_ADP5520=m -CONFIG_GPIO_ARIZONA=m -CONFIG_GPIO_BD9571MWV=m -CONFIG_GPIO_CRYSTAL_COVE=m -CONFIG_GPIO_DA9052=m -CONFIG_GPIO_DA9055=m -CONFIG_GPIO_DLN2=m -CONFIG_GPIO_JANZ_TTL=m -CONFIG_GPIO_KEMPLD=m -CONFIG_GPIO_LP3943=m -CONFIG_GPIO_LP873X=m -CONFIG_GPIO_MADERA=m -CONFIG_GPIO_PALMAS=y -CONFIG_GPIO_RC5T583=y -CONFIG_GPIO_TPS65086=m -CONFIG_GPIO_TPS6586X=y -CONFIG_GPIO_TPS65910=y -CONFIG_GPIO_TPS65912=m -CONFIG_GPIO_TQMX86=m -CONFIG_GPIO_TWL4030=m -CONFIG_GPIO_TWL6040=m -CONFIG_GPIO_UCB1400=m -CONFIG_GPIO_WHISKEY_COVE=m -CONFIG_GPIO_WM831X=m -CONFIG_GPIO_WM8350=m -CONFIG_GPIO_WM8994=m -# end of MFD GPIO expanders - -# -# PCI GPIO expanders -# -CONFIG_GPIO_AMD8111=m -CONFIG_GPIO_ML_IOH=m -CONFIG_GPIO_PCI_IDIO_16=m -CONFIG_GPIO_PCIE_IDIO_24=m -CONFIG_GPIO_RDC321X=m -# end of PCI GPIO expanders - -# -# SPI GPIO expanders -# -CONFIG_GPIO_MAX3191X=m -CONFIG_GPIO_MAX7301=m -CONFIG_GPIO_MC33880=m -CONFIG_GPIO_PISOSR=m -CONFIG_GPIO_XRA1403=m -# end of SPI GPIO expanders - -# -# USB GPIO expanders -# -CONFIG_GPIO_VIPERBOARD=m -# end of USB GPIO expanders - -# CONFIG_GPIO_MOCKUP is not set -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -CONFIG_W1_MASTER_MATROX=m -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_DS1WM=m -CONFIG_W1_MASTER_GPIO=m -CONFIG_W1_MASTER_SGI=m -# end of 1-wire Bus Masters - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -CONFIG_W1_SLAVE_DS2405=m -CONFIG_W1_SLAVE_DS2408=m -CONFIG_W1_SLAVE_DS2408_READBACK=y -CONFIG_W1_SLAVE_DS2413=m -CONFIG_W1_SLAVE_DS2406=m -CONFIG_W1_SLAVE_DS2423=m -CONFIG_W1_SLAVE_DS2805=m -CONFIG_W1_SLAVE_DS2430=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -# CONFIG_W1_SLAVE_DS2433_CRC is not set -CONFIG_W1_SLAVE_DS2438=m -CONFIG_W1_SLAVE_DS250X=m -CONFIG_W1_SLAVE_DS2780=m -CONFIG_W1_SLAVE_DS2781=m -CONFIG_W1_SLAVE_DS28E04=m -CONFIG_W1_SLAVE_DS28E17=m -# end of 1-wire Slaves - -CONFIG_POWER_AVS=y -CONFIG_QCOM_CPR=m -CONFIG_POWER_RESET=y -# CONFIG_POWER_RESET_MT6323 is not set -CONFIG_POWER_RESET_RESTART=y -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_POWER_SUPPLY_HWMON=y -CONFIG_PDA_POWER=m -CONFIG_GENERIC_ADC_BATTERY=m -CONFIG_MAX8925_POWER=m -CONFIG_WM831X_BACKUP=m -CONFIG_WM831X_POWER=m -CONFIG_WM8350_POWER=m -CONFIG_TEST_POWER=m -CONFIG_BATTERY_88PM860X=m -CONFIG_CHARGER_ADP5061=m -CONFIG_BATTERY_DS2760=m -CONFIG_BATTERY_DS2780=m -CONFIG_BATTERY_DS2781=m -CONFIG_BATTERY_DS2782=m -CONFIG_BATTERY_SBS=m -CONFIG_CHARGER_SBS=m -CONFIG_MANAGER_SBS=m -CONFIG_BATTERY_BQ27XXX=m -CONFIG_BATTERY_BQ27XXX_I2C=m -CONFIG_BATTERY_BQ27XXX_HDQ=m -# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set -CONFIG_BATTERY_DA9030=m -CONFIG_BATTERY_DA9052=m -CONFIG_CHARGER_DA9150=m -CONFIG_BATTERY_DA9150=m -CONFIG_CHARGER_AXP20X=m -CONFIG_BATTERY_AXP20X=m -CONFIG_AXP20X_POWER=m -CONFIG_AXP288_CHARGER=m -CONFIG_AXP288_FUEL_GAUGE=m -CONFIG_BATTERY_MAX17040=m -CONFIG_BATTERY_MAX17042=m -CONFIG_BATTERY_MAX1721X=m -CONFIG_BATTERY_TWL4030_MADC=m -CONFIG_CHARGER_88PM860X=m -CONFIG_CHARGER_PCF50633=m -CONFIG_BATTERY_RX51=m -CONFIG_CHARGER_ISP1704=m -CONFIG_CHARGER_MAX8903=m -CONFIG_CHARGER_TWL4030=m -CONFIG_CHARGER_LP8727=m -CONFIG_CHARGER_LP8788=m -CONFIG_CHARGER_GPIO=m -CONFIG_CHARGER_MANAGER=y -CONFIG_CHARGER_LT3651=m -CONFIG_CHARGER_MAX14577=m -CONFIG_CHARGER_MAX77693=m -CONFIG_CHARGER_MAX8997=m -CONFIG_CHARGER_MAX8998=m -CONFIG_CHARGER_BQ2415X=m -CONFIG_CHARGER_BQ24190=m -CONFIG_CHARGER_BQ24257=m -CONFIG_CHARGER_BQ24735=m -CONFIG_CHARGER_BQ25890=m -CONFIG_CHARGER_SMB347=m -CONFIG_CHARGER_TPS65090=m -CONFIG_BATTERY_GAUGE_LTC2941=m -CONFIG_BATTERY_RT5033=m -CONFIG_CHARGER_RT9455=m -CONFIG_CHARGER_CROS_USBPD=m -CONFIG_CHARGER_WILCO=m -CONFIG_HWMON=y -CONFIG_HWMON_VID=m -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -CONFIG_SENSORS_ABITUGURU=m -CONFIG_SENSORS_ABITUGURU3=m -CONFIG_SENSORS_AD7314=m -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM1177=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_ADT7X10=m -CONFIG_SENSORS_ADT7310=m -CONFIG_SENSORS_ADT7410=m -CONFIG_SENSORS_ADT7411=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7475=m -CONFIG_SENSORS_AS370=m -CONFIG_SENSORS_ASC7621=m -CONFIG_SENSORS_AXI_FAN_CONTROL=m -CONFIG_SENSORS_K8TEMP=m -CONFIG_SENSORS_K10TEMP=m -CONFIG_SENSORS_FAM15H_POWER=m -CONFIG_SENSORS_APPLESMC=m -CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_ASPEED=m -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DRIVETEMP=y -CONFIG_SENSORS_DS620=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_DELL_SMM=m -CONFIG_SENSORS_DA9052_ADC=m -CONFIG_SENSORS_DA9055=m -CONFIG_SENSORS_I5K_AMB=m -CONFIG_SENSORS_F71805F=m -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_MC13783_ADC=m -CONFIG_SENSORS_FSCHMD=m -CONFIG_SENSORS_FTSTEUTATES=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_G760A=m -CONFIG_SENSORS_G762=m -CONFIG_SENSORS_HIH6130=m -CONFIG_SENSORS_IBMAEM=m -CONFIG_SENSORS_IBMPEX=m -CONFIG_SENSORS_IIO_HWMON=m -CONFIG_SENSORS_I5500=m -CONFIG_SENSORS_CORETEMP=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_JC42=m -CONFIG_SENSORS_POWR1220=m -CONFIG_SENSORS_LINEAGE=m -CONFIG_SENSORS_LTC2945=m -CONFIG_SENSORS_LTC2947=m -CONFIG_SENSORS_LTC2947_I2C=m -CONFIG_SENSORS_LTC2947_SPI=m -CONFIG_SENSORS_LTC2990=m -CONFIG_SENSORS_LTC4151=m -CONFIG_SENSORS_LTC4215=m -CONFIG_SENSORS_LTC4222=m -CONFIG_SENSORS_LTC4245=m -CONFIG_SENSORS_LTC4260=m -CONFIG_SENSORS_LTC4261=m -CONFIG_SENSORS_MAX1111=m -CONFIG_SENSORS_MAX16065=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_MAX1668=m -CONFIG_SENSORS_MAX197=m -CONFIG_SENSORS_MAX31722=m -CONFIG_SENSORS_MAX31730=m -CONFIG_SENSORS_MAX6621=m -CONFIG_SENSORS_MAX6639=m -CONFIG_SENSORS_MAX6642=m -CONFIG_SENSORS_MAX6650=m -CONFIG_SENSORS_MAX6697=m -CONFIG_SENSORS_MAX31790=m -CONFIG_SENSORS_MCP3021=m -CONFIG_SENSORS_TC654=m -CONFIG_SENSORS_MENF21BMC_HWMON=m -CONFIG_SENSORS_ADCXX=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM70=m -CONFIG_SENSORS_LM73=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_LM93=m -CONFIG_SENSORS_LM95234=m -CONFIG_SENSORS_LM95241=m -CONFIG_SENSORS_LM95245=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_SENSORS_NCT6683=m -CONFIG_SENSORS_NCT6775=m -CONFIG_SENSORS_NCT7802=m -CONFIG_SENSORS_NCT7904=m -CONFIG_SENSORS_NPCM7XX=m -CONFIG_SENSORS_PCF8591=m -CONFIG_PMBUS=m -CONFIG_SENSORS_PMBUS=m -CONFIG_SENSORS_ADM1275=m -CONFIG_SENSORS_BEL_PFE=m -CONFIG_SENSORS_IBM_CFFPS=m -CONFIG_SENSORS_INSPUR_IPSPS=m -CONFIG_SENSORS_IR35221=m -CONFIG_SENSORS_IR38064=m -CONFIG_SENSORS_IRPS5401=m -CONFIG_SENSORS_ISL68137=m -CONFIG_SENSORS_LM25066=m -CONFIG_SENSORS_LTC2978=m -CONFIG_SENSORS_LTC2978_REGULATOR=y -CONFIG_SENSORS_LTC3815=m -CONFIG_SENSORS_MAX16064=m -CONFIG_SENSORS_MAX20730=m -CONFIG_SENSORS_MAX20751=m -CONFIG_SENSORS_MAX31785=m -CONFIG_SENSORS_MAX34440=m -CONFIG_SENSORS_MAX8688=m -CONFIG_SENSORS_PXE1610=m -CONFIG_SENSORS_TPS40422=m -CONFIG_SENSORS_TPS53679=m -CONFIG_SENSORS_UCD9000=m -CONFIG_SENSORS_UCD9200=m -CONFIG_SENSORS_XDPE122=m -CONFIG_SENSORS_ZL6100=m -CONFIG_SENSORS_SHT15=m -CONFIG_SENSORS_SHT21=m -CONFIG_SENSORS_SHT3x=m -CONFIG_SENSORS_SHTC1=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_EMC1403=m -CONFIG_SENSORS_EMC2103=m -CONFIG_SENSORS_EMC6W201=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_SMSC47M192=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_SCH56XX_COMMON=m -CONFIG_SENSORS_SCH5627=m -CONFIG_SENSORS_SCH5636=m -CONFIG_SENSORS_STTS751=m -CONFIG_SENSORS_SMM665=m -CONFIG_SENSORS_ADC128D818=m -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_ADS7871=m -CONFIG_SENSORS_AMC6821=m -CONFIG_SENSORS_INA209=m -CONFIG_SENSORS_INA2XX=m -CONFIG_SENSORS_INA3221=m -CONFIG_SENSORS_TC74=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_TMP102=m -CONFIG_SENSORS_TMP103=m -CONFIG_SENSORS_TMP108=m -CONFIG_SENSORS_TMP401=m -CONFIG_SENSORS_TMP421=m -CONFIG_SENSORS_TMP513=m -CONFIG_SENSORS_VIA_CPUTEMP=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83773G=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83795=m -# CONFIG_SENSORS_W83795_FANCTRL is not set -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83L786NG=m -CONFIG_SENSORS_W83627HF=m -CONFIG_SENSORS_W83627EHF=m -CONFIG_SENSORS_WM831X=m -CONFIG_SENSORS_WM8350=m -CONFIG_SENSORS_XGENE=m - -# -# ACPI drivers -# -CONFIG_SENSORS_ACPI_POWER=m -CONFIG_SENSORS_ATK0110=m -CONFIG_THERMAL=y -# CONFIG_THERMAL_STATISTICS is not set -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_WRITABLE_TRIPS=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_GOV_BANG_BANG=y -CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_CLOCK_THERMAL=y -CONFIG_DEVFREQ_THERMAL=y -CONFIG_THERMAL_EMULATION=y - -# -# Intel thermal drivers -# -CONFIG_INTEL_POWERCLAMP=m -CONFIG_X86_PKG_TEMP_THERMAL=m -CONFIG_INTEL_SOC_DTS_IOSF_CORE=m -CONFIG_INTEL_SOC_DTS_THERMAL=m - -# -# ACPI INT340X thermal drivers -# -CONFIG_INT340X_THERMAL=m -CONFIG_ACPI_THERMAL_REL=m -CONFIG_INT3406_THERMAL=m -CONFIG_PROC_THERMAL_MMIO_RAPL=y -# end of ACPI INT340X thermal drivers - -CONFIG_INTEL_BXT_PMIC_THERMAL=m -CONFIG_INTEL_PCH_THERMAL=m -# end of Intel thermal drivers - -CONFIG_GENERIC_ADC_THERMAL=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y -CONFIG_WATCHDOG_OPEN_TIMEOUT=0 -CONFIG_WATCHDOG_SYSFS=y - -# -# Watchdog Pretimeout Governors -# -# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -CONFIG_DA9052_WATCHDOG=m -CONFIG_DA9055_WATCHDOG=m -CONFIG_DA9063_WATCHDOG=m -CONFIG_DA9062_WATCHDOG=m -CONFIG_MENF21BMC_WATCHDOG=m -CONFIG_MENZ069_WATCHDOG=m -CONFIG_WDAT_WDT=m -CONFIG_WM831X_WATCHDOG=m -CONFIG_WM8350_WATCHDOG=m -CONFIG_XILINX_WATCHDOG=m -CONFIG_ZIIRAVE_WATCHDOG=m -CONFIG_RAVE_SP_WATCHDOG=m -CONFIG_CADENCE_WATCHDOG=m -CONFIG_DW_WATCHDOG=m -CONFIG_TWL4030_WATCHDOG=m -CONFIG_MAX63XX_WATCHDOG=m -CONFIG_RETU_WATCHDOG=m -CONFIG_ACQUIRE_WDT=m -CONFIG_ADVANTECH_WDT=m -CONFIG_ALIM1535_WDT=m -CONFIG_ALIM7101_WDT=m -CONFIG_EBC_C384_WDT=m -CONFIG_F71808E_WDT=m -CONFIG_SP5100_TCO=m -CONFIG_SBC_FITPC2_WATCHDOG=m -CONFIG_EUROTECH_WDT=m -CONFIG_IB700_WDT=m -CONFIG_IBMASR=m -CONFIG_WAFER_WDT=m -CONFIG_I6300ESB_WDT=m -CONFIG_IE6XX_WDT=m -CONFIG_ITCO_WDT=m -CONFIG_ITCO_VENDOR_SUPPORT=y -CONFIG_IT8712F_WDT=m -CONFIG_IT87_WDT=m -CONFIG_HP_WATCHDOG=m -CONFIG_HPWDT_NMI_DECODING=y -CONFIG_KEMPLD_WDT=m -CONFIG_SC1200_WDT=m -CONFIG_PC87413_WDT=m -CONFIG_NV_TCO=m -CONFIG_60XX_WDT=m -CONFIG_CPU5_WDT=m -CONFIG_SMSC_SCH311X_WDT=m -CONFIG_SMSC37B787_WDT=m -CONFIG_TQMX86_WDT=m -CONFIG_VIA_WDT=m -CONFIG_W83627HF_WDT=m -CONFIG_W83877F_WDT=m -CONFIG_W83977F_WDT=m -CONFIG_MACHZ_WDT=m -CONFIG_SBC_EPX_C3_WATCHDOG=m -CONFIG_NI903X_WDT=m -CONFIG_NIC7018_WDT=m -CONFIG_MEN_A21_WDT=m -CONFIG_XEN_WDT=m - -# -# PCI-based Watchdog Cards -# -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m - -# -# USB-based Watchdog Cards -# -CONFIG_USBPCWATCHDOG=m -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y -# CONFIG_SSB_PCMCIAHOST is not set -CONFIG_SSB_SDIOHOST_POSSIBLE=y -CONFIG_SSB_SDIOHOST=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_GPIO=y -CONFIG_BCMA_POSSIBLE=y -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_SFLASH=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -# CONFIG_BCMA_DEBUG is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -CONFIG_MFD_AS3711=y -CONFIG_PMIC_ADP5520=y -CONFIG_MFD_AAT2870_CORE=y -CONFIG_MFD_BCM590XX=m -CONFIG_MFD_BD9571MWV=m -CONFIG_MFD_AXP20X=m -CONFIG_MFD_AXP20X_I2C=m -CONFIG_MFD_CROS_EC_DEV=m -CONFIG_MFD_MADERA=m -CONFIG_MFD_MADERA_I2C=m -CONFIG_MFD_MADERA_SPI=m -# CONFIG_MFD_CS47L15 is not set -# CONFIG_MFD_CS47L35 is not set -# CONFIG_MFD_CS47L85 is not set -# CONFIG_MFD_CS47L90 is not set -# CONFIG_MFD_CS47L92 is not set -CONFIG_PMIC_DA903X=y -CONFIG_PMIC_DA9052=y -CONFIG_MFD_DA9052_SPI=y -CONFIG_MFD_DA9052_I2C=y -CONFIG_MFD_DA9055=y -CONFIG_MFD_DA9062=m -CONFIG_MFD_DA9063=y -CONFIG_MFD_DA9150=m -CONFIG_MFD_DLN2=m -CONFIG_MFD_MC13XXX=m -CONFIG_MFD_MC13XXX_SPI=m -CONFIG_MFD_MC13XXX_I2C=m -CONFIG_HTC_PASIC3=m -CONFIG_HTC_I2CPLD=y -CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m -CONFIG_LPC_ICH=m -CONFIG_LPC_SCH=m -CONFIG_INTEL_SOC_PMIC=y -CONFIG_INTEL_SOC_PMIC_BXTWC=m -CONFIG_INTEL_SOC_PMIC_CHTWC=y -CONFIG_INTEL_SOC_PMIC_CHTDC_TI=m -CONFIG_MFD_INTEL_LPSS=m -CONFIG_MFD_INTEL_LPSS_ACPI=m -CONFIG_MFD_INTEL_LPSS_PCI=m -CONFIG_MFD_IQS62X=m -CONFIG_MFD_JANZ_CMODIO=m -CONFIG_MFD_KEMPLD=m -CONFIG_MFD_88PM800=m -CONFIG_MFD_88PM805=m -CONFIG_MFD_88PM860X=y -CONFIG_MFD_MAX14577=y -CONFIG_MFD_MAX77693=y -CONFIG_MFD_MAX77843=y -CONFIG_MFD_MAX8907=m -CONFIG_MFD_MAX8925=y -CONFIG_MFD_MAX8997=y -CONFIG_MFD_MAX8998=y -CONFIG_MFD_MT6397=m -CONFIG_MFD_MENF21BMC=m -CONFIG_EZX_PCAP=y -CONFIG_MFD_VIPERBOARD=m -CONFIG_MFD_RETU=m -CONFIG_MFD_PCF50633=m -CONFIG_PCF50633_ADC=m -CONFIG_PCF50633_GPIO=m -CONFIG_UCB1400_CORE=m -CONFIG_MFD_RDC321X=m -CONFIG_MFD_RT5033=m -CONFIG_MFD_RC5T583=y -CONFIG_MFD_SEC_CORE=y -CONFIG_MFD_SI476X_CORE=m -CONFIG_MFD_SM501=m -CONFIG_MFD_SM501_GPIO=y -CONFIG_MFD_SKY81452=m -CONFIG_MFD_SMSC=y -CONFIG_ABX500_CORE=y -CONFIG_AB3100_CORE=y -CONFIG_AB3100_OTP=m -CONFIG_MFD_SYSCON=y -CONFIG_MFD_TI_AM335X_TSCADC=m -CONFIG_MFD_LP3943=m -CONFIG_MFD_LP8788=y -CONFIG_MFD_TI_LMU=m -CONFIG_MFD_PALMAS=y -CONFIG_TPS6105X=m -CONFIG_TPS65010=m -CONFIG_TPS6507X=m -CONFIG_MFD_TPS65086=m -CONFIG_MFD_TPS65090=y -# CONFIG_MFD_TPS68470 is not set -CONFIG_MFD_TI_LP873X=m -CONFIG_MFD_TPS6586X=y -CONFIG_MFD_TPS65910=y -CONFIG_MFD_TPS65912=y -CONFIG_MFD_TPS65912_I2C=y -CONFIG_MFD_TPS65912_SPI=y -CONFIG_MFD_TPS80031=y -CONFIG_TWL4030_CORE=y -CONFIG_MFD_TWL4030_AUDIO=y -CONFIG_TWL6040_CORE=y -CONFIG_MFD_WL1273_CORE=m -CONFIG_MFD_LM3533=m -CONFIG_MFD_TQMX86=m -CONFIG_MFD_VX855=m -CONFIG_MFD_ARIZONA=y -CONFIG_MFD_ARIZONA_I2C=m -CONFIG_MFD_ARIZONA_SPI=m -CONFIG_MFD_CS47L24=y -CONFIG_MFD_WM5102=y -CONFIG_MFD_WM5110=y -CONFIG_MFD_WM8997=y -CONFIG_MFD_WM8998=y -CONFIG_MFD_WM8400=y -CONFIG_MFD_WM831X=y -CONFIG_MFD_WM831X_I2C=y -CONFIG_MFD_WM831X_SPI=y -CONFIG_MFD_WM8350=y -CONFIG_MFD_WM8350_I2C=y -CONFIG_MFD_WM8994=m -CONFIG_RAVE_SP_CORE=m -# end of Multifunction device drivers - -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=m -CONFIG_REGULATOR_VIRTUAL_CONSUMER=m -CONFIG_REGULATOR_USERSPACE_CONSUMER=m -CONFIG_REGULATOR_88PG86X=m -CONFIG_REGULATOR_88PM800=m -CONFIG_REGULATOR_88PM8607=m -CONFIG_REGULATOR_ACT8865=m -CONFIG_REGULATOR_AD5398=m -CONFIG_REGULATOR_AAT2870=m -CONFIG_REGULATOR_AB3100=m -CONFIG_REGULATOR_ARIZONA_LDO1=m -CONFIG_REGULATOR_ARIZONA_MICSUPP=m -CONFIG_REGULATOR_AS3711=m -CONFIG_REGULATOR_AXP20X=m -CONFIG_REGULATOR_BCM590XX=m -CONFIG_REGULATOR_BD9571MWV=m -CONFIG_REGULATOR_DA903X=m -CONFIG_REGULATOR_DA9052=m -CONFIG_REGULATOR_DA9055=m -CONFIG_REGULATOR_DA9062=m -CONFIG_REGULATOR_DA9210=m -CONFIG_REGULATOR_DA9211=m -CONFIG_REGULATOR_FAN53555=m -CONFIG_REGULATOR_GPIO=m -CONFIG_REGULATOR_ISL9305=m -CONFIG_REGULATOR_ISL6271A=m -CONFIG_REGULATOR_LM363X=m -CONFIG_REGULATOR_LP3971=m -CONFIG_REGULATOR_LP3972=m -CONFIG_REGULATOR_LP872X=m -CONFIG_REGULATOR_LP8755=m -CONFIG_REGULATOR_LP8788=m -CONFIG_REGULATOR_LTC3589=m -CONFIG_REGULATOR_LTC3676=m -CONFIG_REGULATOR_MAX14577=m -CONFIG_REGULATOR_MAX1586=m -CONFIG_REGULATOR_MAX8649=m -CONFIG_REGULATOR_MAX8660=m -CONFIG_REGULATOR_MAX8907=m -CONFIG_REGULATOR_MAX8925=m -CONFIG_REGULATOR_MAX8952=m -CONFIG_REGULATOR_MAX8997=m -CONFIG_REGULATOR_MAX8998=m -CONFIG_REGULATOR_MAX77693=m -CONFIG_REGULATOR_MC13XXX_CORE=m -CONFIG_REGULATOR_MC13783=m -CONFIG_REGULATOR_MC13892=m -CONFIG_REGULATOR_MP8859=m -CONFIG_REGULATOR_MT6311=m -CONFIG_REGULATOR_MT6323=m -CONFIG_REGULATOR_MT6397=m -CONFIG_REGULATOR_PALMAS=m -CONFIG_REGULATOR_PCAP=m -CONFIG_REGULATOR_PCF50633=m -CONFIG_REGULATOR_PFUZE100=m -CONFIG_REGULATOR_PV88060=m -CONFIG_REGULATOR_PV88080=m -CONFIG_REGULATOR_PV88090=m -CONFIG_REGULATOR_PWM=m -CONFIG_REGULATOR_QCOM_SPMI=m -CONFIG_REGULATOR_RC5T583=m -CONFIG_REGULATOR_RT5033=m -CONFIG_REGULATOR_S2MPA01=m -CONFIG_REGULATOR_S2MPS11=m -CONFIG_REGULATOR_S5M8767=m -CONFIG_REGULATOR_SKY81452=m -CONFIG_REGULATOR_SLG51000=m -CONFIG_REGULATOR_TPS51632=m -CONFIG_REGULATOR_TPS6105X=m -CONFIG_REGULATOR_TPS62360=m -CONFIG_REGULATOR_TPS65023=m -CONFIG_REGULATOR_TPS6507X=m -CONFIG_REGULATOR_TPS65086=m -CONFIG_REGULATOR_TPS65090=m -CONFIG_REGULATOR_TPS65132=m -CONFIG_REGULATOR_TPS6524X=m -CONFIG_REGULATOR_TPS6586X=m -CONFIG_REGULATOR_TPS65910=m -CONFIG_REGULATOR_TPS65912=m -CONFIG_REGULATOR_TPS80031=m -CONFIG_REGULATOR_TWL4030=m -CONFIG_REGULATOR_WM831X=m -CONFIG_REGULATOR_WM8350=m -CONFIG_REGULATOR_WM8400=m -CONFIG_REGULATOR_WM8994=m -CONFIG_CEC_CORE=m -CONFIG_CEC_NOTIFIER=y -CONFIG_RC_CORE=m -CONFIG_RC_MAP=m -CONFIG_LIRC=y -CONFIG_RC_DECODERS=y -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m -CONFIG_IR_IMON_DECODER=m -CONFIG_IR_RCMM_DECODER=m -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -CONFIG_IR_ENE=m -CONFIG_IR_IMON=m -CONFIG_IR_IMON_RAW=m -CONFIG_IR_MCEUSB=m -CONFIG_IR_ITE_CIR=m -CONFIG_IR_FINTEK=m -CONFIG_IR_NUVOTON=m -CONFIG_IR_REDRAT3=m -CONFIG_IR_STREAMZAP=m -CONFIG_IR_WINBOND_CIR=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -CONFIG_RC_LOOPBACK=m -CONFIG_IR_SERIAL=m -CONFIG_IR_SERIAL_TRANSMITTER=y -CONFIG_IR_SIR=m -CONFIG_RC_XBOX_DVD=m -CONFIG_MEDIA_SUPPORT=m - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -# CONFIG_MEDIA_CEC_RC is not set -CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_CONTROLLER_DVB=y -# CONFIG_MEDIA_CONTROLLER_REQUEST_API is not set -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_SUBDEV_API=y -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L2_I2C=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_V4L2_FLASH_LED_CLASS=m -CONFIG_V4L2_FWNODE=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_DVB_CORE=m -# CONFIG_DVB_MMAP is not set -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=8 -CONFIG_DVB_DYNAMIC_MINORS=y -# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set -# CONFIG_DVB_ULE_DEBUG is not set - -# -# Media drivers -# -CONFIG_MEDIA_USB_SUPPORT=y - -# -# Webcam devices -# -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -CONFIG_VIDEO_TM6000=m -CONFIG_VIDEO_TM6000_ALSA=m -CONFIG_VIDEO_TM6000_DVB=m - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_CXUSB_ANALOG=y -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -CONFIG_DVB_USB_ZD1301=m -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m - -# -# Webcam, TV (analog/digital) USB devices -# -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# Software defined radio USB devices -# -CONFIG_USB_AIRSPY=m -CONFIG_USB_HACKRF=m -CONFIG_USB_MSI2500=m - -# -# USB HDMI CEC adapters -# -CONFIG_USB_PULSE8_CEC=m -CONFIG_USB_RAINSHADOW_CEC=m -CONFIG_MEDIA_PCI_SUPPORT=y - -# -# Media capture support -# -CONFIG_VIDEO_MEYE=m -CONFIG_VIDEO_SOLO6X10=m -CONFIG_VIDEO_TW5864=m -CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_TW686X=m - -# -# Media capture/analog TV support -# -CONFIG_VIDEO_IVTV=m -# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set -CONFIG_VIDEO_IVTV_ALSA=m -CONFIG_VIDEO_FB_IVTV=m -# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not set -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DT3155=m - -# -# Media capture/analog/hybrid TV support -# -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CX18_ALSA=m -CONFIG_VIDEO_CX23885=m -CONFIG_MEDIA_ALTERA_CI=m -CONFIG_VIDEO_CX25821=m -CONFIG_VIDEO_CX25821_ALSA=m -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_ENABLE_VP3054=y -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_BT848=m -CONFIG_DVB_BT8XX=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_RC=y -CONFIG_VIDEO_SAA7134_DVB=m -CONFIG_VIDEO_SAA7134_GO7007=m -CONFIG_VIDEO_SAA7164=m -CONFIG_VIDEO_COBALT=m - -# -# Media digital TV PCI Adapters -# -CONFIG_DVB_AV7110_IR=y -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set -CONFIG_DVB_PLUTO2=m -CONFIG_DVB_DM1105=m -CONFIG_DVB_PT1=m -CONFIG_DVB_PT3=m -CONFIG_MANTIS_CORE=m -CONFIG_DVB_MANTIS=m -CONFIG_DVB_HOPPER=m -CONFIG_DVB_NGENE=m -CONFIG_DVB_DDBRIDGE=m -# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set -CONFIG_DVB_SMIPCIE=m -CONFIG_DVB_NETUP_UNIDVB=m -CONFIG_VIDEO_IPU3_CIO2=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_VIDEO_VIA_CAMERA=m -CONFIG_VIDEO_CADENCE=y -CONFIG_VIDEO_CADENCE_CSI2RX=m -CONFIG_VIDEO_CADENCE_CSI2TX=m -CONFIG_VIDEO_ASPEED=m -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m -CONFIG_VIDEO_SH_VEU=m -CONFIG_V4L_TEST_DRIVERS=y -# CONFIG_VIDEO_VIMC is not set -CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_VIVID_CEC=y -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -CONFIG_VIDEO_VIM2M=m -CONFIG_VIDEO_VICODEC=m -CONFIG_DVB_PLATFORM_DRIVERS=y -CONFIG_CEC_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CROS_EC_CEC=m -CONFIG_VIDEO_SECO_CEC=m -# CONFIG_VIDEO_SECO_RC is not set -CONFIG_SDR_PLATFORM_DRIVERS=y - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_TEA575X=m -CONFIG_RADIO_SI470X=m -CONFIG_USB_SI470X=m -CONFIG_I2C_SI470X=m -CONFIG_RADIO_SI4713=m -CONFIG_USB_SI4713=m -CONFIG_PLATFORM_SI4713=m -CONFIG_I2C_SI4713=m -CONFIG_RADIO_SI476X=m -CONFIG_USB_MR800=m -CONFIG_USB_DSBR=m -CONFIG_RADIO_MAXIRADIO=m -CONFIG_RADIO_SHARK=m -CONFIG_RADIO_SHARK2=m -CONFIG_USB_KEENE=m -CONFIG_USB_RAREMONO=m -CONFIG_USB_MA901=m -CONFIG_RADIO_TEA5764=m -CONFIG_RADIO_SAA7706H=m -CONFIG_RADIO_TEF6862=m -CONFIG_RADIO_WL1273=m - -# -# Texas Instruments WL128x FM driver (ST based) -# -CONFIG_RADIO_WL128X=m -# end of Texas Instruments WL128x FM driver (ST based) - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_V4L2=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -CONFIG_SMS_SIANO_DEBUGFS=y -CONFIG_VIDEO_V4L2_TPG=m - -# -# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=m - -# -# I2C Encoders, decoders, sensors and other helper chips -# - -# -# Audio decoders, processors and mixers -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TDA1997X=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS3308=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_TLV320AIC23B=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m -CONFIG_VIDEO_SONY_BTF_MPX=m - -# -# RDS decoders -# -CONFIG_VIDEO_SAA6588=m - -# -# Video decoders -# -CONFIG_VIDEO_ADV7180=m -CONFIG_VIDEO_ADV7183=m -CONFIG_VIDEO_ADV7604=m -CONFIG_VIDEO_ADV7604_CEC=y -CONFIG_VIDEO_ADV7842=m -CONFIG_VIDEO_ADV7842_CEC=y -CONFIG_VIDEO_BT819=m -CONFIG_VIDEO_BT856=m -CONFIG_VIDEO_BT866=m -CONFIG_VIDEO_KS0127=m -CONFIG_VIDEO_ML86V7667=m -CONFIG_VIDEO_SAA7110=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TC358743=m -CONFIG_VIDEO_TC358743_CEC=y -CONFIG_VIDEO_TVP514X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TVP7002=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m -CONFIG_VIDEO_TW9910=m -CONFIG_VIDEO_VPX3220=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_CX25840=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m -CONFIG_VIDEO_SAA7185=m -CONFIG_VIDEO_ADV7170=m -CONFIG_VIDEO_ADV7175=m -CONFIG_VIDEO_ADV7343=m -CONFIG_VIDEO_ADV7393=m -CONFIG_VIDEO_ADV7511=m -CONFIG_VIDEO_ADV7511_CEC=y -CONFIG_VIDEO_AD9389B=m -CONFIG_VIDEO_AK881X=m -CONFIG_VIDEO_THS8200=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_APTINA_PLL=m -CONFIG_VIDEO_SMIAPP_PLL=m -CONFIG_VIDEO_HI556=m -CONFIG_VIDEO_IMX214=m -CONFIG_VIDEO_IMX219=m -CONFIG_VIDEO_IMX258=m -CONFIG_VIDEO_IMX274=m -CONFIG_VIDEO_IMX290=m -CONFIG_VIDEO_IMX319=m -CONFIG_VIDEO_IMX355=m -CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV2659=m -CONFIG_VIDEO_OV2680=m -CONFIG_VIDEO_OV2685=m -CONFIG_VIDEO_OV5647=m -CONFIG_VIDEO_OV6650=m -CONFIG_VIDEO_OV5670=m -CONFIG_VIDEO_OV5675=m -CONFIG_VIDEO_OV5695=m -CONFIG_VIDEO_OV7251=m -CONFIG_VIDEO_OV772X=m -CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_OV7740=m -CONFIG_VIDEO_OV8856=m -CONFIG_VIDEO_OV9640=m -CONFIG_VIDEO_OV9650=m -CONFIG_VIDEO_OV13858=m -CONFIG_VIDEO_VS6624=m -CONFIG_VIDEO_MT9M001=m -CONFIG_VIDEO_MT9M032=m -CONFIG_VIDEO_MT9M111=m -CONFIG_VIDEO_MT9P031=m -CONFIG_VIDEO_MT9T001=m -CONFIG_VIDEO_MT9T112=m -CONFIG_VIDEO_MT9V011=m -CONFIG_VIDEO_MT9V032=m -CONFIG_VIDEO_MT9V111=m -CONFIG_VIDEO_SR030PC30=m -CONFIG_VIDEO_NOON010PC30=m -CONFIG_VIDEO_M5MOLS=m -CONFIG_VIDEO_RJ54N1=m -CONFIG_VIDEO_S5K6AA=m -CONFIG_VIDEO_S5K6A3=m -CONFIG_VIDEO_S5K4ECGX=m -CONFIG_VIDEO_S5K5BAF=m -CONFIG_VIDEO_SMIAPP=m -CONFIG_VIDEO_ET8EK8=m -CONFIG_VIDEO_S5C73M3=m - -# -# Lens drivers -# -CONFIG_VIDEO_AD5820=m -CONFIG_VIDEO_AK7375=m -CONFIG_VIDEO_DW9714=m -CONFIG_VIDEO_DW9807_VCM=m - -# -# Flash devices -# -CONFIG_VIDEO_ADP1653=m -CONFIG_VIDEO_LM3560=m -CONFIG_VIDEO_LM3646=m - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m - -# -# Audio/Video compression chips -# -CONFIG_VIDEO_SAA6752HS=m - -# -# SDR tuner chips -# -CONFIG_SDR_MAX2175=m - -# -# Miscellaneous helper chips -# -CONFIG_VIDEO_THS7303=m -CONFIG_VIDEO_M52790=m -CONFIG_VIDEO_I2C=m -CONFIG_VIDEO_ST_MIPID02=m -# end of I2C Encoders, decoders, sensors and other helper chips - -# -# SPI helper chips -# -CONFIG_VIDEO_GS1662=m -# end of SPI helper chips - -# -# Media SPI Adapters -# -CONFIG_CXD2880_SPI_DRV=m -# end of Media SPI Adapters - -CONFIG_MEDIA_TUNER=m - -# -# Customize TV tuners -# -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA18250=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_XC4000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=m -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_M88RS6000T=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_MXL301RF=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m -CONFIG_MEDIA_TUNER_QM1D1B0004=m -# end of Customize TV tuners - -# -# Customise DVB Frontends -# - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV0910=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_STV6111=m -CONFIG_DVB_MXL5XX=m -CONFIG_DVB_M88DS3103=m - -# -# Multistandard (cable + terrestrial) frontends -# -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10036=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24117=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_MB86A16=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_S5H1432=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_DIB9000=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_STV0367=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_CXD2841ER=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_RTL2832_SDR=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_ZD1301_DEMOD=m -CONFIG_DVB_GP8PSK_FE=m -CONFIG_DVB_CXD2880=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m -CONFIG_DVB_MN88443X=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBH25=m -CONFIG_DVB_LNBH29=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_LGS8GL5=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_TDA665x=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m -CONFIG_DVB_HORUS3A=m -CONFIG_DVB_ASCOT2E=m -CONFIG_DVB_HELENE=m - -# -# Common Interface (EN50221) controller drivers -# -CONFIG_DVB_CXD2099=m -CONFIG_DVB_SP2=m - -# -# Tools to develop new frontends -# -CONFIG_DVB_DUMMY_FE=m -# end of Customise DVB Frontends - -# -# Graphics support -# -CONFIG_AGP=y -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -CONFIG_AGP_SIS=m -CONFIG_AGP_VIA=y -CONFIG_INTEL_GTT=y -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_VGA_SWITCHEROO=y -CONFIG_DRM=m -CONFIG_DRM_MIPI_DBI=m -CONFIG_DRM_MIPI_DSI=y -# CONFIG_DRM_DP_AUX_CHARDEV is not set -# CONFIG_DRM_DEBUG_SELFTEST is not set -CONFIG_DRM_KMS_HELPER=m -CONFIG_DRM_KMS_FB_HELPER=y -# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set -CONFIG_DRM_LOAD_EDID_FIRMWARE=y -# CONFIG_DRM_DP_CEC is not set -CONFIG_DRM_TTM=m -CONFIG_DRM_TTM_DMA_PAGE_POOL=y -CONFIG_DRM_VRAM_HELPER=m -CONFIG_DRM_TTM_HELPER=m -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y -CONFIG_DRM_GEM_SHMEM_HELPER=y -CONFIG_DRM_SCHED=m - -# -# I2C encoder or helper chips -# -CONFIG_DRM_I2C_CH7006=m -CONFIG_DRM_I2C_SIL164=m -CONFIG_DRM_I2C_NXP_TDA998X=m -CONFIG_DRM_I2C_NXP_TDA9950=m -# end of I2C encoder or helper chips - -# -# ARM devices -# -# end of ARM devices - -CONFIG_DRM_RADEON=m -# CONFIG_DRM_RADEON_USERPTR is not set -CONFIG_DRM_AMDGPU=m -# CONFIG_DRM_AMDGPU_SI is not set -# CONFIG_DRM_AMDGPU_CIK is not set -CONFIG_DRM_AMDGPU_USERPTR=y -# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set - -# -# ACP (Audio CoProcessor) Configuration -# -# CONFIG_DRM_AMD_ACP is not set -# end of ACP (Audio CoProcessor) Configuration - -# -# Display Engine Configuration -# -CONFIG_DRM_AMD_DC=y -CONFIG_DRM_AMD_DC_DCN=y -# CONFIG_DRM_AMD_DC_HDCP is not set -# CONFIG_DEBUG_KERNEL_DC is not set -# end of Display Engine Configuration - -# CONFIG_HSA_AMD is not set -CONFIG_DRM_NOUVEAU=m -# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set -CONFIG_NOUVEAU_DEBUG=5 -CONFIG_NOUVEAU_DEBUG_DEFAULT=3 -# CONFIG_NOUVEAU_DEBUG_MMU is not set -CONFIG_DRM_NOUVEAU_BACKLIGHT=y -CONFIG_DRM_I915=m -CONFIG_DRM_I915_FORCE_PROBE="" -CONFIG_DRM_I915_CAPTURE_ERROR=y -CONFIG_DRM_I915_COMPRESS_ERROR=y -CONFIG_DRM_I915_USERPTR=y -# CONFIG_DRM_I915_GVT is not set - -# -# drm/i915 Debugging -# -# CONFIG_DRM_I915_WERROR is not set -# CONFIG_DRM_I915_DEBUG is not set -# CONFIG_DRM_I915_DEBUG_MMIO is not set -# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set -# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set -# CONFIG_DRM_I915_DEBUG_GUC is not set -# CONFIG_DRM_I915_SELFTEST is not set -# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set -# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set -# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set -# end of drm/i915 Debugging - -# -# drm/i915 Profile Guided Optimisation -# -CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250 -CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500 -CONFIG_DRM_I915_PREEMPT_TIMEOUT=640 -CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000 -CONFIG_DRM_I915_STOP_TIMEOUT=100 -CONFIG_DRM_I915_TIMESLICE_DURATION=1 -# end of drm/i915 Profile Guided Optimisation - -CONFIG_DRM_VGEM=m -# CONFIG_DRM_VKMS is not set -CONFIG_DRM_VMWGFX=m -CONFIG_DRM_VMWGFX_FBCON=y -CONFIG_DRM_GMA500=m -CONFIG_DRM_GMA600=y -CONFIG_DRM_GMA3600=y -CONFIG_DRM_UDL=m -CONFIG_DRM_AST=m -# CONFIG_DRM_MGAG200 is not set -CONFIG_DRM_CIRRUS_QEMU=m -CONFIG_DRM_QXL=m -CONFIG_DRM_BOCHS=m -CONFIG_DRM_VIRTIO_GPU=m -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set -# end of Display Panels - -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_PANEL_BRIDGE=y - -# -# Display Interface Bridges -# -CONFIG_DRM_ANALOGIX_ANX78XX=m -CONFIG_DRM_ANALOGIX_DP=m -# end of Display Interface Bridges - -# CONFIG_DRM_ETNAVIV is not set -CONFIG_DRM_GM12U320=m -CONFIG_TINYDRM_HX8357D=m -CONFIG_TINYDRM_ILI9225=m -CONFIG_TINYDRM_ILI9341=m -CONFIG_TINYDRM_ILI9486=m -CONFIG_TINYDRM_MI0283QT=m -CONFIG_TINYDRM_REPAPER=m -CONFIG_TINYDRM_ST7586=m -CONFIG_TINYDRM_ST7735R=m -CONFIG_DRM_XEN=y -CONFIG_DRM_XEN_FRONTEND=m -CONFIG_DRM_VBOXVIDEO=m -# CONFIG_DRM_LEGACY is not set -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y - -# -# Frame buffer Devices -# -CONFIG_FB_CMDLINE=y -CONFIG_FB_NOTIFY=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_DDC=m -CONFIG_FB_BOOT_VESA_SUPPORT=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SYS_FILLRECT=m -CONFIG_FB_SYS_COPYAREA=m -CONFIG_FB_SYS_IMAGEBLIT=m -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=m -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_HECUBA=m -CONFIG_FB_SVGALIB=m -CONFIG_FB_BACKLIGHT=m -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -CONFIG_FB_CIRRUS=m -CONFIG_FB_PM2=m -CONFIG_FB_PM2_FIFO_DISCONNECT=y -CONFIG_FB_CYBER2000=m -CONFIG_FB_CYBER2000_DDC=y -CONFIG_FB_ARC=m -CONFIG_FB_ASILIANT=y -CONFIG_FB_IMSTT=y -CONFIG_FB_VGA16=m -CONFIG_FB_UVESA=m -CONFIG_FB_VESA=y -CONFIG_FB_EFI=y -CONFIG_FB_N411=m -CONFIG_FB_HGA=m -CONFIG_FB_OPENCORES=m -CONFIG_FB_S1D13XXX=m -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_RIVA=m -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set -CONFIG_FB_RIVA_BACKLIGHT=y -CONFIG_FB_I740=m -CONFIG_FB_LE80578=m -CONFIG_FB_CARILLO_RANCH=m -CONFIG_FB_INTEL=m -# CONFIG_FB_INTEL_DEBUG is not set -CONFIG_FB_INTEL_I2C=y -CONFIG_FB_MATROX=m -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -CONFIG_FB_MATROX_I2C=m -CONFIG_FB_MATROX_MAVEN=m -CONFIG_FB_RADEON=m -CONFIG_FB_RADEON_I2C=y -CONFIG_FB_RADEON_BACKLIGHT=y -# CONFIG_FB_RADEON_DEBUG is not set -CONFIG_FB_ATY128=m -CONFIG_FB_ATY128_BACKLIGHT=y -CONFIG_FB_ATY=m -CONFIG_FB_ATY_CT=y -# CONFIG_FB_ATY_GENERIC_LCD is not set -CONFIG_FB_ATY_GX=y -CONFIG_FB_ATY_BACKLIGHT=y -CONFIG_FB_S3=m -CONFIG_FB_S3_DDC=y -CONFIG_FB_SAVAGE=m -CONFIG_FB_SAVAGE_I2C=y -# CONFIG_FB_SAVAGE_ACCEL is not set -CONFIG_FB_SIS=m -CONFIG_FB_SIS_300=y -CONFIG_FB_SIS_315=y -CONFIG_FB_VIA=m -# CONFIG_FB_VIA_DIRECT_PROCFS is not set -CONFIG_FB_VIA_X_COMPATIBILITY=y -CONFIG_FB_NEOMAGIC=m -CONFIG_FB_KYRO=m -CONFIG_FB_3DFX=m -# CONFIG_FB_3DFX_ACCEL is not set -# CONFIG_FB_3DFX_I2C is not set -CONFIG_FB_VOODOO1=m -CONFIG_FB_VT8623=m -CONFIG_FB_TRIDENT=m -CONFIG_FB_ARK=m -CONFIG_FB_PM3=m -CONFIG_FB_CARMINE=m -CONFIG_FB_CARMINE_DRAM_EVAL=y -# CONFIG_CARMINE_DRAM_CUSTOM is not set -CONFIG_FB_SM501=m -CONFIG_FB_SMSCUFX=m -CONFIG_FB_UDL=m -CONFIG_FB_IBM_GXT4500=m -# CONFIG_FB_VIRTUAL is not set -CONFIG_XEN_FBDEV_FRONTEND=m -CONFIG_FB_METRONOME=m -CONFIG_FB_MB862XX=m -CONFIG_FB_MB862XX_PCI_GDC=y -CONFIG_FB_MB862XX_I2C=y -CONFIG_FB_HYPERV=m -CONFIG_FB_SIMPLE=y -CONFIG_FB_SM712=m -# end of Frame buffer Devices - -# -# Backlight & LCD device support -# -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_L4F00242T03=m -CONFIG_LCD_LMS283GF05=m -CONFIG_LCD_LTV350QV=m -CONFIG_LCD_ILI922X=m -CONFIG_LCD_ILI9320=m -CONFIG_LCD_TDO24M=m -CONFIG_LCD_VGG2432A4=m -CONFIG_LCD_PLATFORM=m -CONFIG_LCD_AMS369FG06=m -CONFIG_LCD_LMS501KF03=m -CONFIG_LCD_HX8357=m -CONFIG_LCD_OTM3225A=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m -CONFIG_BACKLIGHT_LM3533=m -CONFIG_BACKLIGHT_CARILLO_RANCH=m -CONFIG_BACKLIGHT_PWM=m -CONFIG_BACKLIGHT_DA903X=m -CONFIG_BACKLIGHT_DA9052=m -CONFIG_BACKLIGHT_MAX8925=m -CONFIG_BACKLIGHT_APPLE=m -CONFIG_BACKLIGHT_QCOM_WLED=m -CONFIG_BACKLIGHT_SAHARA=m -CONFIG_BACKLIGHT_WM831X=m -CONFIG_BACKLIGHT_ADP5520=m -CONFIG_BACKLIGHT_ADP8860=m -CONFIG_BACKLIGHT_ADP8870=m -CONFIG_BACKLIGHT_88PM860X=m -CONFIG_BACKLIGHT_PCF50633=m -CONFIG_BACKLIGHT_AAT2870=m -CONFIG_BACKLIGHT_LM3630A=m -CONFIG_BACKLIGHT_LM3639=m -CONFIG_BACKLIGHT_LP855X=m -CONFIG_BACKLIGHT_LP8788=m -CONFIG_BACKLIGHT_PANDORA=m -CONFIG_BACKLIGHT_SKY81452=m -CONFIG_BACKLIGHT_AS3711=m -CONFIG_BACKLIGHT_GPIO=m -CONFIG_BACKLIGHT_LV5207LP=m -CONFIG_BACKLIGHT_BD6107=m -CONFIG_BACKLIGHT_ARCXCNN=m -CONFIG_BACKLIGHT_RAVE_SP=m -# end of Backlight & LCD device support - -CONFIG_VGASTATE=m -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_DUMMY_CONSOLE_COLUMNS=80 -CONFIG_DUMMY_CONSOLE_ROWS=25 -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set -# end of Console display driver support - -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# end of Graphics support - -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_SEQ_DEVICE=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_COMPRESS_OFFLOAD=m -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_DMA_SGBUF=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_SEQUENCER_OSS is not set -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -CONFIG_SND_SEQ_MIDI_EVENT=m -CONFIG_SND_SEQ_MIDI=m -CONFIG_SND_SEQ_MIDI_EMUL=m -CONFIG_SND_SEQ_VIRMIDI=m -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_OPL3_LIB_SEQ=m -CONFIG_SND_VX_LIB=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -CONFIG_SND_PCSP=m -CONFIG_SND_DUMMY=m -CONFIG_SND_ALOOP=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -CONFIG_SND_MTS64=m -CONFIG_SND_SERIAL_U16550=m -CONFIG_SND_MPU401=m -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_SB_COMMON=m -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -CONFIG_SND_ALS4000=m -CONFIG_SND_ASIHPI=m -CONFIG_SND_ATIIXP=m -CONFIG_SND_ATIIXP_MODEM=m -CONFIG_SND_AU8810=m -CONFIG_SND_AU8820=m -CONFIG_SND_AU8830=m -CONFIG_SND_AW2=m -CONFIG_SND_BT87X=m -# CONFIG_SND_BT87X_OVERCLOCK is not set -CONFIG_SND_CA0106=m -CONFIG_SND_CMIPCI=m -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -CONFIG_SND_CS4281=m -CONFIG_SND_CS46XX=m -CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CTXFI=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_INDIGOIOX=m -CONFIG_SND_INDIGODJX=m -CONFIG_SND_ENS1370=m -CONFIG_SND_ENS1371=m -CONFIG_SND_FM801=m -CONFIG_SND_FM801_TEA575X_BOOL=y -CONFIG_SND_HDSP=m -CONFIG_SND_HDSPM=m -CONFIG_SND_ICE1724=m -CONFIG_SND_INTEL8X0=m -CONFIG_SND_INTEL8X0M=m -CONFIG_SND_KORG1212=m -CONFIG_SND_LOLA=m -CONFIG_SND_LX6464ES=m -CONFIG_SND_MIXART=m -CONFIG_SND_NM256=m -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -CONFIG_SND_RME32=m -CONFIG_SND_RME96=m -CONFIG_SND_RME9652=m -CONFIG_SND_VIA82XX=m -CONFIG_SND_VIA82XX_MODEM=m -CONFIG_SND_VIRTUOSO=m -CONFIG_SND_VX222=m -CONFIG_SND_YMFPCI=m - -# -# HD-Audio -# -CONFIG_SND_HDA=m -CONFIG_SND_HDA_INTEL=m -CONFIG_SND_HDA_HWDEP=y -CONFIG_SND_HDA_RECONFIG=y -CONFIG_SND_HDA_INPUT_BEEP=y -CONFIG_SND_HDA_INPUT_BEEP_MODE=0 -CONFIG_SND_HDA_PATCH_LOADER=y -CONFIG_SND_HDA_CODEC_REALTEK=m -CONFIG_SND_HDA_CODEC_ANALOG=m -CONFIG_SND_HDA_CODEC_SIGMATEL=m -CONFIG_SND_HDA_CODEC_VIA=m -CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_HDA_CODEC_CIRRUS=m -CONFIG_SND_HDA_CODEC_CONEXANT=m -CONFIG_SND_HDA_CODEC_CA0110=m -CONFIG_SND_HDA_CODEC_CA0132=m -CONFIG_SND_HDA_CODEC_CA0132_DSP=y -CONFIG_SND_HDA_CODEC_CMEDIA=m -CONFIG_SND_HDA_CODEC_SI3054=m -CONFIG_SND_HDA_GENERIC=m -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -# end of HD-Audio - -CONFIG_SND_HDA_CORE=m -CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_COMPONENT=y -CONFIG_SND_HDA_I915=y -CONFIG_SND_HDA_EXT_CORE=m -CONFIG_SND_HDA_PREALLOC_SIZE=64 -CONFIG_SND_INTEL_NHLT=y -CONFIG_SND_INTEL_DSP_CONFIG=m -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_USX2Y=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_US122L=m -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_FIREWIRE=y -CONFIG_SND_FIREWIRE_LIB=m -CONFIG_SND_DICE=m -CONFIG_SND_OXFW=m -CONFIG_SND_ISIGHT=m -CONFIG_SND_FIREWORKS=m -CONFIG_SND_BEBOB=m -CONFIG_SND_FIREWIRE_DIGI00X=m -CONFIG_SND_FIREWIRE_TASCAM=m -CONFIG_SND_FIREWIRE_MOTU=m -CONFIG_SND_FIREFACE=m -CONFIG_SND_PCMCIA=y -CONFIG_SND_VXPOCKET=m -CONFIG_SND_PDAUDIOCF=m -CONFIG_SND_SOC=m -CONFIG_SND_SOC_AC97_BUS=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -CONFIG_SND_SOC_COMPRESS=y -CONFIG_SND_SOC_TOPOLOGY=y -CONFIG_SND_SOC_ACPI=m -CONFIG_SND_SOC_AMD_ACP=m -CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m -CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m -CONFIG_SND_SOC_AMD_ACP3x=m -CONFIG_SND_SOC_AMD_RV_RT5682_MACH=m -CONFIG_SND_ATMEL_SOC=m -CONFIG_SND_BCM63XX_I2S_WHISTLER=m -CONFIG_SND_DESIGNWARE_I2S=m -# CONFIG_SND_DESIGNWARE_PCM is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -CONFIG_SND_SOC_FSL_ASRC=m -CONFIG_SND_SOC_FSL_SAI=m -CONFIG_SND_SOC_FSL_MQS=m -CONFIG_SND_SOC_FSL_AUDMIX=m -CONFIG_SND_SOC_FSL_SSI=m -CONFIG_SND_SOC_FSL_SPDIF=m -CONFIG_SND_SOC_FSL_ESAI=m -CONFIG_SND_SOC_FSL_MICFIL=m -CONFIG_SND_SOC_IMX_AUDMUX=m -# end of SoC Audio for Freescale CPUs - -CONFIG_SND_I2S_HI6210_I2S=m -# CONFIG_SND_SOC_IMG is not set -CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y -CONFIG_SND_SST_IPC=m -CONFIG_SND_SST_IPC_PCI=m -CONFIG_SND_SST_IPC_ACPI=m -CONFIG_SND_SOC_INTEL_SST_ACPI=m -CONFIG_SND_SOC_INTEL_SST=m -CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m -CONFIG_SND_SOC_INTEL_HASWELL=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m -CONFIG_SND_SOC_INTEL_SKYLAKE=m -CONFIG_SND_SOC_INTEL_SKL=m -CONFIG_SND_SOC_INTEL_APL=m -CONFIG_SND_SOC_INTEL_KBL=m -CONFIG_SND_SOC_INTEL_GLK=m -CONFIG_SND_SOC_INTEL_CNL=m -CONFIG_SND_SOC_INTEL_CFL=m -CONFIG_SND_SOC_INTEL_CML_H=m -CONFIG_SND_SOC_INTEL_CML_LP=m -CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m -CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m -CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y -CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m -CONFIG_SND_SOC_ACPI_INTEL_MATCH=m -CONFIG_SND_SOC_INTEL_MACH=y -# CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set -CONFIG_SND_SOC_INTEL_HASWELL_MACH=m -CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=m -CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m -CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m -CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m -CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m -CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m -CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m -CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m -CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON=m -CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=m -CONFIG_SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m -CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=m -CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH=m -CONFIG_SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH=m -CONFIG_SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH=m -CONFIG_SND_SOC_MTK_BTCVSD=m -CONFIG_SND_SOC_SOF_TOPLEVEL=y -CONFIG_SND_SOC_SOF_PCI=m -CONFIG_SND_SOC_SOF_ACPI=m -# CONFIG_SND_SOC_SOF_DEBUG_PROBES is not set -# CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT is not set -CONFIG_SND_SOC_SOF=m -CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y -CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y -CONFIG_SND_SOC_SOF_INTEL_ACPI=m -CONFIG_SND_SOC_SOF_INTEL_PCI=m -CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=m -CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=m -CONFIG_SND_SOC_SOF_INTEL_COMMON=m -CONFIG_SND_SOC_SOF_MERRIFIELD_SUPPORT=y -CONFIG_SND_SOC_SOF_MERRIFIELD=m -CONFIG_SND_SOC_SOF_APOLLOLAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_APOLLOLAKE=m -CONFIG_SND_SOC_SOF_GEMINILAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_GEMINILAKE=m -CONFIG_SND_SOC_SOF_CANNONLAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_CANNONLAKE=m -CONFIG_SND_SOC_SOF_COFFEELAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_COFFEELAKE=m -CONFIG_SND_SOC_SOF_ICELAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_ICELAKE=m -CONFIG_SND_SOC_SOF_COMETLAKE_LP=m -CONFIG_SND_SOC_SOF_COMETLAKE_LP_SUPPORT=y -CONFIG_SND_SOC_SOF_COMETLAKE_H=m -CONFIG_SND_SOC_SOF_COMETLAKE_H_SUPPORT=y -CONFIG_SND_SOC_SOF_TIGERLAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_TIGERLAKE=m -CONFIG_SND_SOC_SOF_ELKHARTLAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_ELKHARTLAKE=m -CONFIG_SND_SOC_SOF_JASPERLAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_HDA_COMMON=m -CONFIG_SND_SOC_SOF_HDA_LINK=y -CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC=y -# CONFIG_SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1 is not set -CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m -CONFIG_SND_SOC_SOF_HDA=m -CONFIG_SND_SOC_SOF_XTENSA=m - -# -# STMicroelectronics STM32 SOC audio support -# -# end of STMicroelectronics STM32 SOC audio support - -CONFIG_SND_SOC_XILINX_I2S=m -# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set -# CONFIG_SND_SOC_XILINX_SPDIF is not set -CONFIG_SND_SOC_XTFPGA_I2S=m -CONFIG_ZX_TDM=m -CONFIG_SND_SOC_I2C_AND_SPI=m - -# -# CODEC drivers -# -CONFIG_SND_SOC_AC97_CODEC=m -CONFIG_SND_SOC_ADAU_UTILS=m -CONFIG_SND_SOC_ADAU1701=m -CONFIG_SND_SOC_ADAU17X1=m -CONFIG_SND_SOC_ADAU1761=m -CONFIG_SND_SOC_ADAU1761_I2C=m -CONFIG_SND_SOC_ADAU1761_SPI=m -CONFIG_SND_SOC_ADAU7002=m -CONFIG_SND_SOC_ADAU7118=m -CONFIG_SND_SOC_ADAU7118_HW=m -CONFIG_SND_SOC_ADAU7118_I2C=m -CONFIG_SND_SOC_AK4104=m -CONFIG_SND_SOC_AK4118=m -CONFIG_SND_SOC_AK4458=m -CONFIG_SND_SOC_AK4554=m -CONFIG_SND_SOC_AK4613=m -CONFIG_SND_SOC_AK4642=m -CONFIG_SND_SOC_AK5386=m -CONFIG_SND_SOC_AK5558=m -CONFIG_SND_SOC_ALC5623=m -CONFIG_SND_SOC_BD28623=m -CONFIG_SND_SOC_BT_SCO=m -CONFIG_SND_SOC_CROS_EC_CODEC=m -CONFIG_SND_SOC_CS35L32=m -CONFIG_SND_SOC_CS35L33=m -CONFIG_SND_SOC_CS35L34=m -CONFIG_SND_SOC_CS35L35=m -CONFIG_SND_SOC_CS35L36=m -CONFIG_SND_SOC_CS42L42=m -CONFIG_SND_SOC_CS42L51=m -CONFIG_SND_SOC_CS42L51_I2C=m -CONFIG_SND_SOC_CS42L52=m -CONFIG_SND_SOC_CS42L56=m -CONFIG_SND_SOC_CS42L73=m -CONFIG_SND_SOC_CS4265=m -CONFIG_SND_SOC_CS4270=m -CONFIG_SND_SOC_CS4271=m -CONFIG_SND_SOC_CS4271_I2C=m -CONFIG_SND_SOC_CS4271_SPI=m -CONFIG_SND_SOC_CS42XX8=m -CONFIG_SND_SOC_CS42XX8_I2C=m -CONFIG_SND_SOC_CS43130=m -CONFIG_SND_SOC_CS4341=m -CONFIG_SND_SOC_CS4349=m -CONFIG_SND_SOC_CS53L30=m -CONFIG_SND_SOC_CX2072X=m -CONFIG_SND_SOC_DA7213=m -CONFIG_SND_SOC_DA7219=m -CONFIG_SND_SOC_DMIC=m -CONFIG_SND_SOC_HDMI_CODEC=m -CONFIG_SND_SOC_ES7134=m -CONFIG_SND_SOC_ES7241=m -CONFIG_SND_SOC_ES8316=m -CONFIG_SND_SOC_ES8328=m -CONFIG_SND_SOC_ES8328_I2C=m -CONFIG_SND_SOC_ES8328_SPI=m -CONFIG_SND_SOC_GTM601=m -CONFIG_SND_SOC_HDAC_HDMI=m -CONFIG_SND_SOC_HDAC_HDA=m -CONFIG_SND_SOC_INNO_RK3036=m -CONFIG_SND_SOC_MAX98088=m -CONFIG_SND_SOC_MAX98090=m -CONFIG_SND_SOC_MAX98357A=m -CONFIG_SND_SOC_MAX98504=m -CONFIG_SND_SOC_MAX9867=m -CONFIG_SND_SOC_MAX98927=m -CONFIG_SND_SOC_MAX98373=m -CONFIG_SND_SOC_MAX9860=m -CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m -CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m -CONFIG_SND_SOC_PCM1681=m -CONFIG_SND_SOC_PCM1789=m -CONFIG_SND_SOC_PCM1789_I2C=m -CONFIG_SND_SOC_PCM179X=m -CONFIG_SND_SOC_PCM179X_I2C=m -CONFIG_SND_SOC_PCM179X_SPI=m -CONFIG_SND_SOC_PCM186X=m -CONFIG_SND_SOC_PCM186X_I2C=m -CONFIG_SND_SOC_PCM186X_SPI=m -CONFIG_SND_SOC_PCM3060=m -CONFIG_SND_SOC_PCM3060_I2C=m -CONFIG_SND_SOC_PCM3060_SPI=m -CONFIG_SND_SOC_PCM3168A=m -CONFIG_SND_SOC_PCM3168A_I2C=m -CONFIG_SND_SOC_PCM3168A_SPI=m -CONFIG_SND_SOC_PCM512x=m -CONFIG_SND_SOC_PCM512x_I2C=m -CONFIG_SND_SOC_PCM512x_SPI=m -# CONFIG_SND_SOC_RK3328 is not set -CONFIG_SND_SOC_RL6231=m -CONFIG_SND_SOC_RL6347A=m -CONFIG_SND_SOC_RT286=m -CONFIG_SND_SOC_RT298=m -CONFIG_SND_SOC_RT1011=m -CONFIG_SND_SOC_RT1015=m -CONFIG_SND_SOC_RT5514=m -CONFIG_SND_SOC_RT5514_SPI=m -CONFIG_SND_SOC_RT5616=m -CONFIG_SND_SOC_RT5631=m -CONFIG_SND_SOC_RT5640=m -CONFIG_SND_SOC_RT5645=m -CONFIG_SND_SOC_RT5651=m -CONFIG_SND_SOC_RT5660=m -CONFIG_SND_SOC_RT5663=m -CONFIG_SND_SOC_RT5670=m -CONFIG_SND_SOC_RT5677=m -CONFIG_SND_SOC_RT5677_SPI=m -CONFIG_SND_SOC_RT5682=m -CONFIG_SND_SOC_SGTL5000=m -CONFIG_SND_SOC_SI476X=m -CONFIG_SND_SOC_SIGMADSP=m -CONFIG_SND_SOC_SIGMADSP_I2C=m -CONFIG_SND_SOC_SIGMADSP_REGMAP=m -CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m -CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m -CONFIG_SND_SOC_SPDIF=m -CONFIG_SND_SOC_SSM2305=m -CONFIG_SND_SOC_SSM2602=m -CONFIG_SND_SOC_SSM2602_SPI=m -CONFIG_SND_SOC_SSM2602_I2C=m -CONFIG_SND_SOC_SSM4567=m -CONFIG_SND_SOC_STA32X=m -CONFIG_SND_SOC_STA350=m -CONFIG_SND_SOC_STI_SAS=m -CONFIG_SND_SOC_TAS2552=m -CONFIG_SND_SOC_TAS2562=m -CONFIG_SND_SOC_TAS2770=m -CONFIG_SND_SOC_TAS5086=m -CONFIG_SND_SOC_TAS571X=m -CONFIG_SND_SOC_TAS5720=m -CONFIG_SND_SOC_TAS6424=m -CONFIG_SND_SOC_TDA7419=m -CONFIG_SND_SOC_TFA9879=m -CONFIG_SND_SOC_TLV320AIC23=m -CONFIG_SND_SOC_TLV320AIC23_I2C=m -CONFIG_SND_SOC_TLV320AIC23_SPI=m -CONFIG_SND_SOC_TLV320AIC31XX=m -CONFIG_SND_SOC_TLV320AIC32X4=m -CONFIG_SND_SOC_TLV320AIC32X4_I2C=m -CONFIG_SND_SOC_TLV320AIC32X4_SPI=m -CONFIG_SND_SOC_TLV320AIC3X=m -CONFIG_SND_SOC_TLV320ADCX140=m -CONFIG_SND_SOC_TS3A227E=m -CONFIG_SND_SOC_TSCS42XX=m -CONFIG_SND_SOC_TSCS454=m -CONFIG_SND_SOC_UDA1334=m -CONFIG_SND_SOC_WM8510=m -CONFIG_SND_SOC_WM8523=m -CONFIG_SND_SOC_WM8524=m -CONFIG_SND_SOC_WM8580=m -CONFIG_SND_SOC_WM8711=m -CONFIG_SND_SOC_WM8728=m -CONFIG_SND_SOC_WM8731=m -CONFIG_SND_SOC_WM8737=m -CONFIG_SND_SOC_WM8741=m -CONFIG_SND_SOC_WM8750=m -CONFIG_SND_SOC_WM8753=m -CONFIG_SND_SOC_WM8770=m -CONFIG_SND_SOC_WM8776=m -CONFIG_SND_SOC_WM8782=m -CONFIG_SND_SOC_WM8804=m -CONFIG_SND_SOC_WM8804_I2C=m -CONFIG_SND_SOC_WM8804_SPI=m -CONFIG_SND_SOC_WM8903=m -CONFIG_SND_SOC_WM8904=m -CONFIG_SND_SOC_WM8960=m -CONFIG_SND_SOC_WM8962=m -CONFIG_SND_SOC_WM8974=m -CONFIG_SND_SOC_WM8978=m -CONFIG_SND_SOC_WM8985=m -CONFIG_SND_SOC_ZX_AUD96P22=m -CONFIG_SND_SOC_MAX9759=m -CONFIG_SND_SOC_MT6351=m -CONFIG_SND_SOC_MT6358=m -CONFIG_SND_SOC_MT6660=m -CONFIG_SND_SOC_NAU8540=m -CONFIG_SND_SOC_NAU8810=m -CONFIG_SND_SOC_NAU8822=m -CONFIG_SND_SOC_NAU8824=m -CONFIG_SND_SOC_NAU8825=m -CONFIG_SND_SOC_TPA6130A2=m -# end of CODEC drivers - -CONFIG_SND_SIMPLE_CARD_UTILS=m -CONFIG_SND_SIMPLE_CARD=m -CONFIG_SND_X86=y -CONFIG_HDMI_LPE_AUDIO=m -CONFIG_SND_XEN_FRONTEND=m -CONFIG_AC97_BUS=m - -# -# HID support -# -CONFIG_HID=m -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=m -CONFIG_HID_GENERIC=m - -# -# Special HID drivers -# -CONFIG_HID_A4TECH=m -CONFIG_HID_ACCUTOUCH=m -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -CONFIG_HID_APPLEIR=m -CONFIG_HID_ASUS=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -CONFIG_HID_BIGBEN_FF=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_COUGAR=m -CONFIG_HID_MACALLY=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CMEDIA=m -CONFIG_HID_CP2112=m -CONFIG_HID_CREATIVE_SB0540=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -CONFIG_HID_ELAN=m -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -CONFIG_HID_GFRM=m -CONFIG_HID_GLORIOUS=m -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -CONFIG_HID_GOOGLE_HAMMER=m -CONFIG_HID_GT683R=m -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -CONFIG_HID_VIEWSONIC=m -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m -CONFIG_HID_ITE=m -CONFIG_HID_JABRA=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LCPOWER=m -CONFIG_HID_LED=m -CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MALTRON=m -CONFIG_HID_MAYFLASH=m -CONFIG_HID_REDRAGON=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -CONFIG_HID_NTI=m -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -CONFIG_HID_PICOLCD_LCD=y -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -CONFIG_HID_RETRODE=m -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -CONFIG_HID_STEAM=m -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_HYPERV_MOUSE=m -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -CONFIG_HID_UDRAW_PS3=m -CONFIG_HID_U2FZERO=m -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m -CONFIG_HID_ALPS=m -CONFIG_HID_MCP2221=m -# end of Special HID drivers - -# -# USB HID support -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -# end of USB HID Boot Protocol drivers -# end of USB HID support - -# -# I2C HID support -# -CONFIG_I2C_HID=m -# end of I2C HID support - -# -# Intel ISH HID support -# -CONFIG_INTEL_ISH_HID=m -# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set -# end of Intel ISH HID support -# end of HID support - -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_USB_CONN_GPIO=m -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=y -CONFIG_USB_PCI=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_LEDS_TRIGGER_USBPORT=m -CONFIG_USB_AUTOSUSPEND_DELAY=2 -CONFIG_USB_MON=m - -# -# USB Host Controller Drivers -# -CONFIG_USB_C67X00_HCD=m -CONFIG_USB_XHCI_HCD=y -# CONFIG_USB_XHCI_DBGCAP is not set -CONFIG_USB_XHCI_PCI=y -CONFIG_USB_XHCI_PLATFORM=m -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=y -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_OXU210HP_HCD=m -CONFIG_USB_ISP116X_HCD=m -CONFIG_USB_FOTG210_HCD=m -CONFIG_USB_MAX3421_HCD=m -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_U132_HCD=m -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_HCD_ISO=y -CONFIG_USB_SL811_CS=m -CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_HCD_BCMA=m -CONFIG_USB_HCD_SSB=m -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USBIP_CORE=m -CONFIG_USBIP_VHCI_HCD=m -CONFIG_USBIP_VHCI_HC_PORTS=8 -CONFIG_USBIP_VHCI_NR_HCS=1 -CONFIG_USBIP_HOST=m -CONFIG_USBIP_VUDC=m -# CONFIG_USBIP_DEBUG is not set -CONFIG_USB_CDNS3=m -# CONFIG_USB_CDNS3_GADGET is not set -# CONFIG_USB_CDNS3_HOST is not set -CONFIG_USB_CDNS3_PCI_WRAP=m -CONFIG_USB_MUSB_HDRC=m -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y - -# -# Platform Glue Layer -# - -# -# MUSB DMA mode -# -CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_DWC3=m -CONFIG_USB_DWC3_ULPI=y -# CONFIG_USB_DWC3_HOST is not set -# CONFIG_USB_DWC3_GADGET is not set -CONFIG_USB_DWC3_DUAL_ROLE=y - -# -# Platform Glue Driver Support -# -CONFIG_USB_DWC3_PCI=m -CONFIG_USB_DWC3_HAPS=m -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -CONFIG_USB_DWC2_PCI=m -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_CHIPIDEA=m -CONFIG_USB_CHIPIDEA_PCI=m -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_ISP1760=m -CONFIG_USB_ISP1760_HCD=y -CONFIG_USB_ISP1761_UDC=y -# CONFIG_USB_ISP1760_HOST_ROLE is not set -# CONFIG_USB_ISP1760_GADGET_ROLE is not set -CONFIG_USB_ISP1760_DUAL_ROLE=y - -# -# USB port drivers -# -CONFIG_USB_USS720=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -CONFIG_USB_SERIAL_F8153X=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7715_PARPORT=y -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -CONFIG_USB_SERIAL_UPD78F0730=m -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_APPLE_MFI_FASTCHARGE=m -CONFIG_USB_SISUSBVGA=m -# CONFIG_USB_SISUSBVGA_CON is not set -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_USB_EHSET_TEST_FIXTURE=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m -CONFIG_USB_HUB_USB251XB=m -CONFIG_USB_HSIC_USB3503=m -CONFIG_USB_HSIC_USB4604=m -CONFIG_USB_LINK_LAYER_TEST=m -CONFIG_USB_CHAOSKEY=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_CXACRU=m -CONFIG_USB_UEAGLEATM=m -CONFIG_USB_XUSBATM=m - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=m -CONFIG_USB_GPIO_VBUS=m -CONFIG_TAHVO_USB=m -CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y -CONFIG_USB_ISP1301=m -# end of USB Physical Layer drivers - -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -# CONFIG_U_SERIAL_CONSOLE is not set - -# -# USB Peripheral Controller -# -CONFIG_USB_FOTG210_UDC=m -CONFIG_USB_GR_UDC=m -CONFIG_USB_R8A66597=m -CONFIG_USB_PXA27X=m -CONFIG_USB_MV_UDC=m -CONFIG_USB_MV_U3D=m -CONFIG_USB_SNP_CORE=m -# CONFIG_USB_M66592 is not set -CONFIG_USB_BDC_UDC=m - -# -# Platform Support -# -CONFIG_USB_BDC_PCI=m -CONFIG_USB_AMD5536UDC=m -CONFIG_USB_NET2272=m -CONFIG_USB_NET2272_DMA=y -CONFIG_USB_NET2280=m -CONFIG_USB_GOKU=m -CONFIG_USB_EG20T=m -CONFIG_USB_MAX3420_UDC=m -# CONFIG_USB_DUMMY_HCD is not set -# end of USB Peripheral Controller - -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_F_SS_LB=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_U_AUDIO=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_NCM=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_PHONET=m -CONFIG_USB_F_EEM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -CONFIG_USB_F_FS=m -CONFIG_USB_F_UAC1=m -CONFIG_USB_F_UAC2=m -CONFIG_USB_F_UVC=m -CONFIG_USB_F_MIDI=m -CONFIG_USB_F_HID=m -CONFIG_USB_F_PRINTER=m -CONFIG_USB_F_TCM=m -CONFIG_USB_CONFIGFS=m -CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_ACM=y -CONFIG_USB_CONFIGFS_OBEX=y -CONFIG_USB_CONFIGFS_NCM=y -CONFIG_USB_CONFIGFS_ECM=y -CONFIG_USB_CONFIGFS_ECM_SUBSET=y -CONFIG_USB_CONFIGFS_RNDIS=y -CONFIG_USB_CONFIGFS_EEM=y -CONFIG_USB_CONFIGFS_PHONET=y -CONFIG_USB_CONFIGFS_MASS_STORAGE=y -CONFIG_USB_CONFIGFS_F_LB_SS=y -CONFIG_USB_CONFIGFS_F_FS=y -CONFIG_USB_CONFIGFS_F_UAC1=y -# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set -CONFIG_USB_CONFIGFS_F_UAC2=y -CONFIG_USB_CONFIGFS_F_MIDI=y -CONFIG_USB_CONFIGFS_F_HID=y -CONFIG_USB_CONFIGFS_F_UVC=y -CONFIG_USB_CONFIGFS_F_PRINTER=y -# CONFIG_USB_CONFIGFS_F_TCM is not set - -# -# USB Gadget precomposed configurations -# -CONFIG_USB_ZERO=m -CONFIG_USB_AUDIO=m -CONFIG_GADGET_UAC1=y -# CONFIG_GADGET_UAC1_LEGACY is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_ETH_EEM=y -CONFIG_USB_G_NCM=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m -CONFIG_USB_FUNCTIONFS_ETH=y -CONFIG_USB_FUNCTIONFS_RNDIS=y -CONFIG_USB_FUNCTIONFS_GENERIC=y -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_GADGET_TARGET=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_USB_G_PRINTER=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_NOKIA=m -CONFIG_USB_G_ACM_MS=m -# CONFIG_USB_G_MULTI is not set -CONFIG_USB_G_HID=m -CONFIG_USB_G_DBGP=m -# CONFIG_USB_G_DBGP_PRINTK is not set -CONFIG_USB_G_DBGP_SERIAL=y -CONFIG_USB_G_WEBCAM=m -CONFIG_USB_RAW_GADGET=m -# end of USB Gadget precomposed configurations - -CONFIG_TYPEC=m -CONFIG_TYPEC_TCPM=m -CONFIG_TYPEC_TCPCI=m -CONFIG_TYPEC_RT1711H=m -CONFIG_TYPEC_FUSB302=m -CONFIG_TYPEC_UCSI=m -CONFIG_UCSI_CCG=m -CONFIG_UCSI_ACPI=m -CONFIG_TYPEC_HD3SS3220=m -CONFIG_TYPEC_TPS6598X=m - -# -# USB Type-C Multiplexer/DeMultiplexer Switch support -# -CONFIG_TYPEC_MUX_PI3USB30532=m -CONFIG_TYPEC_MUX_INTEL_PMC=m -# end of USB Type-C Multiplexer/DeMultiplexer Switch support - -# -# USB Type-C Alternate Mode drivers -# -CONFIG_TYPEC_DP_ALTMODE=m -CONFIG_TYPEC_NVIDIA_ALTMODE=m -# end of USB Type-C Alternate Mode drivers - -CONFIG_USB_ROLE_SWITCH=m -CONFIG_USB_ROLES_INTEL_XHCI=m -CONFIG_MMC=y -CONFIG_MMC_BLOCK=m -CONFIG_MMC_BLOCK_MINORS=8 -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=y -CONFIG_MMC_SDHCI_ACPI=m -CONFIG_MMC_SDHCI_PLTFM=m -CONFIG_MMC_SDHCI_F_SDH30=m -CONFIG_MMC_WBSD=m -CONFIG_MMC_ALCOR=m -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SPI=m -CONFIG_MMC_SDRICOH_CS=m -CONFIG_MMC_CB710=m -CONFIG_MMC_VIA_SDMMC=m -CONFIG_MMC_VUB300=m -CONFIG_MMC_USHC=m -CONFIG_MMC_USDHI6ROL0=m -CONFIG_MMC_REALTEK_PCI=m -CONFIG_MMC_REALTEK_USB=m -CONFIG_MMC_CQHCI=m -CONFIG_MMC_HSQ=m -CONFIG_MMC_TOSHIBA_PCI=m -CONFIG_MMC_MTK=m -CONFIG_MMC_SDHCI_XENON=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m -CONFIG_MS_BLOCK=m - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_MEMSTICK_R592=m -CONFIG_MEMSTICK_REALTEK_PCI=m -CONFIG_MEMSTICK_REALTEK_USB=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_CLASS_FLASH=m -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set - -# -# LED drivers -# -CONFIG_LEDS_88PM860X=m -CONFIG_LEDS_APU=m -CONFIG_LEDS_AS3645A=m -CONFIG_LEDS_LM3530=m -CONFIG_LEDS_LM3532=m -CONFIG_LEDS_LM3533=m -CONFIG_LEDS_LM3642=m -CONFIG_LEDS_LM3601X=m -CONFIG_LEDS_MT6323=m -CONFIG_LEDS_PCA9532=m -CONFIG_LEDS_PCA9532_GPIO=y -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_LP3944=m -CONFIG_LEDS_LP3952=m -CONFIG_LEDS_LP55XX_COMMON=m -CONFIG_LEDS_LP5521=m -CONFIG_LEDS_LP5523=m -CONFIG_LEDS_LP5562=m -CONFIG_LEDS_LP8501=m -CONFIG_LEDS_LP8788=m -CONFIG_LEDS_CLEVO_MAIL=m -CONFIG_LEDS_PCA955X=m -# CONFIG_LEDS_PCA955X_GPIO is not set -CONFIG_LEDS_PCA963X=m -CONFIG_LEDS_WM831X_STATUS=m -CONFIG_LEDS_WM8350=m -CONFIG_LEDS_DA903X=m -CONFIG_LEDS_DA9052=m -CONFIG_LEDS_DAC124S085=m -CONFIG_LEDS_PWM=m -CONFIG_LEDS_REGULATOR=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_INTEL_SS4200=m -CONFIG_LEDS_ADP5520=m -CONFIG_LEDS_MC13783=m -CONFIG_LEDS_TCA6507=m -CONFIG_LEDS_TLC591XX=m -CONFIG_LEDS_MAX8997=m -CONFIG_LEDS_LM355x=m -CONFIG_LEDS_MENF21BMC=m - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -CONFIG_LEDS_BLINKM=m -CONFIG_LEDS_MLXCPLD=m -CONFIG_LEDS_MLXREG=m -CONFIG_LEDS_USER=m -CONFIG_LEDS_NIC78BX=m -CONFIG_LEDS_TI_LMU_COMMON=m -CONFIG_LEDS_LM36274=m -CONFIG_LEDS_TPS6105X=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_ONESHOT=m -CONFIG_LEDS_TRIGGER_DISK=y -# CONFIG_LEDS_TRIGGER_MTD is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_ACTIVITY=m -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - -# -# iptables trigger is under Netfilter config (LED target) -# -CONFIG_LEDS_TRIGGER_TRANSIENT=m -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LEDS_TRIGGER_PANIC=y -CONFIG_LEDS_TRIGGER_NETDEV=m -CONFIG_LEDS_TRIGGER_PATTERN=m -CONFIG_LEDS_TRIGGER_AUDIO=m -# CONFIG_ACCESSIBILITY is not set -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ON_DEMAND_PAGING=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_QIB=m -CONFIG_INFINIBAND_QIB_DCA=y -CONFIG_INFINIBAND_CXGB4=m -CONFIG_INFINIBAND_EFA=m -CONFIG_INFINIBAND_I40IW=m -CONFIG_MLX4_INFINIBAND=m -CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_OCRDMA=m -CONFIG_INFINIBAND_VMWARE_PVRDMA=m -CONFIG_INFINIBAND_USNIC=m -CONFIG_INFINIBAND_BNXT_RE=m -CONFIG_INFINIBAND_HFI1=m -# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set -# CONFIG_SDMA_VERBOSITY is not set -CONFIG_INFINIBAND_QEDR=m -CONFIG_INFINIBAND_RDMAVT=m -CONFIG_RDMA_RXE=m -CONFIG_RDMA_SIW=m -CONFIG_INFINIBAND_IPOIB=m -CONFIG_INFINIBAND_IPOIB_CM=y -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_SRPT=m -CONFIG_INFINIBAND_ISER=m -CONFIG_INFINIBAND_ISERT=m -CONFIG_INFINIBAND_OPA_VNIC=m -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EDAC=y -# CONFIG_EDAC_LEGACY_SYSFS is not set -# CONFIG_EDAC_DEBUG is not set -CONFIG_EDAC_DECODE_MCE=m -CONFIG_EDAC_GHES=y -CONFIG_EDAC_AMD64=m -# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set -CONFIG_EDAC_E752X=m -CONFIG_EDAC_I82975X=m -CONFIG_EDAC_I3000=m -CONFIG_EDAC_I3200=m -CONFIG_EDAC_IE31200=m -CONFIG_EDAC_X38=m -CONFIG_EDAC_I5400=m -CONFIG_EDAC_I7CORE=m -CONFIG_EDAC_I5000=m -CONFIG_EDAC_I5100=m -CONFIG_EDAC_I7300=m -CONFIG_EDAC_SBRIDGE=m -CONFIG_EDAC_SKX=m -CONFIG_EDAC_I10NM=m -CONFIG_EDAC_PND2=m -CONFIG_RTC_LIB=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set -CONFIG_RTC_NVMEM=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -CONFIG_RTC_DRV_88PM860X=m -CONFIG_RTC_DRV_88PM80X=m -CONFIG_RTC_DRV_ABB5ZES3=m -CONFIG_RTC_DRV_ABEOZ9=m -CONFIG_RTC_DRV_ABX80X=m -CONFIG_RTC_DRV_DS1307=m -# CONFIG_RTC_DRV_DS1307_CENTURY is not set -CONFIG_RTC_DRV_DS1374=m -CONFIG_RTC_DRV_DS1374_WDT=y -CONFIG_RTC_DRV_DS1672=m -CONFIG_RTC_DRV_LP8788=m -CONFIG_RTC_DRV_MAX6900=m -CONFIG_RTC_DRV_MAX8907=m -CONFIG_RTC_DRV_MAX8925=m -CONFIG_RTC_DRV_MAX8998=m -CONFIG_RTC_DRV_MAX8997=m -CONFIG_RTC_DRV_RS5C372=m -CONFIG_RTC_DRV_ISL1208=m -CONFIG_RTC_DRV_ISL12022=m -CONFIG_RTC_DRV_X1205=m -CONFIG_RTC_DRV_PCF8523=m -CONFIG_RTC_DRV_PCF85063=m -CONFIG_RTC_DRV_PCF85363=m -CONFIG_RTC_DRV_PCF8563=m -CONFIG_RTC_DRV_PCF8583=m -CONFIG_RTC_DRV_M41T80=m -CONFIG_RTC_DRV_M41T80_WDT=y -CONFIG_RTC_DRV_BQ32K=m -CONFIG_RTC_DRV_PALMAS=m -CONFIG_RTC_DRV_TPS6586X=m -CONFIG_RTC_DRV_TPS65910=m -CONFIG_RTC_DRV_TPS80031=m -CONFIG_RTC_DRV_RC5T583=m -CONFIG_RTC_DRV_S35390A=m -CONFIG_RTC_DRV_FM3130=m -CONFIG_RTC_DRV_RX8010=m -CONFIG_RTC_DRV_RX8581=m -CONFIG_RTC_DRV_RX8025=m -CONFIG_RTC_DRV_EM3027=m -CONFIG_RTC_DRV_RV3028=m -CONFIG_RTC_DRV_RV8803=m -CONFIG_RTC_DRV_S5M=m -CONFIG_RTC_DRV_SD3078=m - -# -# SPI RTC drivers -# -CONFIG_RTC_DRV_M41T93=m -CONFIG_RTC_DRV_M41T94=m -CONFIG_RTC_DRV_DS1302=m -CONFIG_RTC_DRV_DS1305=m -CONFIG_RTC_DRV_DS1343=m -CONFIG_RTC_DRV_DS1347=m -CONFIG_RTC_DRV_DS1390=m -CONFIG_RTC_DRV_MAX6916=m -CONFIG_RTC_DRV_R9701=m -CONFIG_RTC_DRV_RX4581=m -CONFIG_RTC_DRV_RX6110=m -CONFIG_RTC_DRV_RS5C348=m -CONFIG_RTC_DRV_MAX6902=m -CONFIG_RTC_DRV_PCF2123=m -CONFIG_RTC_DRV_MCP795=m -CONFIG_RTC_I2C_AND_SPI=y - -# -# SPI and I2C RTC drivers -# -CONFIG_RTC_DRV_DS3232=m -CONFIG_RTC_DRV_DS3232_HWMON=y -CONFIG_RTC_DRV_PCF2127=m -CONFIG_RTC_DRV_RV3029C2=m -CONFIG_RTC_DRV_RV3029_HWMON=y - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -CONFIG_RTC_DRV_DS1286=m -CONFIG_RTC_DRV_DS1511=m -CONFIG_RTC_DRV_DS1553=m -CONFIG_RTC_DRV_DS1685_FAMILY=m -CONFIG_RTC_DRV_DS1685=y -# CONFIG_RTC_DRV_DS1689 is not set -# CONFIG_RTC_DRV_DS17285 is not set -# CONFIG_RTC_DRV_DS17485 is not set -# CONFIG_RTC_DRV_DS17885 is not set -CONFIG_RTC_DRV_DS1742=m -CONFIG_RTC_DRV_DS2404=m -CONFIG_RTC_DRV_DA9052=m -CONFIG_RTC_DRV_DA9055=m -CONFIG_RTC_DRV_DA9063=m -CONFIG_RTC_DRV_STK17TA8=m -CONFIG_RTC_DRV_M48T86=m -CONFIG_RTC_DRV_M48T35=m -CONFIG_RTC_DRV_M48T59=m -CONFIG_RTC_DRV_MSM6242=m -CONFIG_RTC_DRV_BQ4802=m -CONFIG_RTC_DRV_RP5C01=m -CONFIG_RTC_DRV_V3020=m -CONFIG_RTC_DRV_WM831X=m -CONFIG_RTC_DRV_WM8350=m -CONFIG_RTC_DRV_PCF50633=m -CONFIG_RTC_DRV_AB3100=m -CONFIG_RTC_DRV_CROS_EC=m - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_FTRTC010=m -CONFIG_RTC_DRV_PCAP=m -CONFIG_RTC_DRV_MC13XXX=m -CONFIG_RTC_DRV_MT6397=m - -# -# HID Sensor RTC drivers -# -CONFIG_RTC_DRV_HID_SENSOR_TIME=m -CONFIG_RTC_DRV_WILCO_EC=m -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=m -CONFIG_DMA_ACPI=y -CONFIG_ALTERA_MSGDMA=m -CONFIG_INTEL_IDMA64=m -CONFIG_INTEL_IDXD=m -CONFIG_INTEL_IOATDMA=m -CONFIG_INTEL_MIC_X100_DMA=m -CONFIG_PLX_DMA=m -CONFIG_QCOM_HIDMA_MGMT=m -CONFIG_QCOM_HIDMA=m -CONFIG_DW_DMAC_CORE=m -CONFIG_DW_DMAC=m -CONFIG_DW_DMAC_PCI=m -CONFIG_DW_EDMA=m -CONFIG_DW_EDMA_PCIE=m -CONFIG_HSU_DMA=m -CONFIG_SF_PDMA=m - -# -# DMA Clients -# -CONFIG_ASYNC_TX_DMA=y -# CONFIG_DMATEST is not set -CONFIG_DMA_ENGINE_RAID=y - -# -# DMABUF options -# -CONFIG_SYNC_FILE=y -# CONFIG_SW_SYNC is not set -# CONFIG_UDMABUF is not set -# CONFIG_DMABUF_MOVE_NOTIFY is not set -# CONFIG_DMABUF_SELFTESTS is not set -# CONFIG_DMABUF_HEAPS is not set -# end of DMABUF options - -CONFIG_DCA=m -CONFIG_AUXDISPLAY=y -CONFIG_HD44780=m -CONFIG_KS0108=m -CONFIG_KS0108_PORT=0x378 -CONFIG_KS0108_DELAY=2 -CONFIG_CFAG12864B=m -CONFIG_CFAG12864B_RATE=20 -CONFIG_IMG_ASCII_LCD=m -CONFIG_PARPORT_PANEL=m -CONFIG_PANEL_PARPORT=0 -CONFIG_PANEL_PROFILE=5 -# CONFIG_PANEL_CHANGE_MESSAGE is not set -# CONFIG_CHARLCD_BL_OFF is not set -# CONFIG_CHARLCD_BL_ON is not set -CONFIG_CHARLCD_BL_FLASH=y -CONFIG_PANEL=m -CONFIG_CHARLCD=m -CONFIG_UIO=m -CONFIG_UIO_CIF=m -CONFIG_UIO_PDRV_GENIRQ=m -CONFIG_UIO_DMEM_GENIRQ=m -CONFIG_UIO_AEC=m -CONFIG_UIO_SERCOS3=m -CONFIG_UIO_PCI_GENERIC=m -CONFIG_UIO_NETX=m -CONFIG_UIO_PRUSS=m -CONFIG_UIO_MF624=m -CONFIG_UIO_HV_GENERIC=m -CONFIG_VFIO_IOMMU_TYPE1=m -CONFIG_VFIO_VIRQFD=m -CONFIG_VFIO=m -CONFIG_VFIO_NOIOMMU=y -CONFIG_VFIO_PCI=m -CONFIG_VFIO_PCI_VGA=y -CONFIG_VFIO_PCI_MMAP=y -CONFIG_VFIO_PCI_INTX=y -CONFIG_VFIO_PCI_IGD=y -CONFIG_VFIO_MDEV=m -CONFIG_VFIO_MDEV_DEVICE=m -CONFIG_IRQ_BYPASS_MANAGER=m -CONFIG_VIRT_DRIVERS=y -CONFIG_VBOXGUEST=m -CONFIG_VIRTIO=y -CONFIG_VIRTIO_MENU=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_VDPA=m -CONFIG_VIRTIO_PMEM=m -CONFIG_VIRTIO_BALLOON=y -CONFIG_VIRTIO_INPUT=m -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y -CONFIG_VDPA=m -# CONFIG_VDPA_SIM is not set -CONFIG_IFCVF=m -CONFIG_VHOST_IOTLB=m -CONFIG_VHOST_RING=m -CONFIG_VHOST_DPN=y -CONFIG_VHOST=m -CONFIG_VHOST_MENU=y -CONFIG_VHOST_NET=m -CONFIG_VHOST_SCSI=m -CONFIG_VHOST_VSOCK=m -CONFIG_VHOST_VDPA=m -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set - -# -# Microsoft Hyper-V guest support -# -CONFIG_HYPERV=m -CONFIG_HYPERV_TIMER=y -CONFIG_HYPERV_UTILS=m -CONFIG_HYPERV_BALLOON=m -# end of Microsoft Hyper-V guest support - -# -# Xen driver support -# -CONFIG_XEN_BALLOON=y -CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y -CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT=512 -CONFIG_XEN_SCRUB_PAGES_DEFAULT=y -CONFIG_XEN_DEV_EVTCHN=m -CONFIG_XEN_BACKEND=y -CONFIG_XENFS=m -CONFIG_XEN_COMPAT_XENFS=y -CONFIG_XEN_SYS_HYPERVISOR=y -CONFIG_XEN_XENBUS_FRONTEND=y -CONFIG_XEN_GNTDEV=m -CONFIG_XEN_GRANT_DEV_ALLOC=m -# CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_SWIOTLB_XEN=y -CONFIG_XEN_PCIDEV_BACKEND=m -CONFIG_XEN_PVCALLS_FRONTEND=m -# CONFIG_XEN_PVCALLS_BACKEND is not set -CONFIG_XEN_SCSI_BACKEND=m -CONFIG_XEN_PRIVCMD=m -CONFIG_XEN_ACPI_PROCESSOR=y -CONFIG_XEN_MCE_LOG=y -CONFIG_XEN_HAVE_PVMMU=y -CONFIG_XEN_EFI=y -CONFIG_XEN_AUTO_XLATE=y -CONFIG_XEN_ACPI=y -CONFIG_XEN_SYMS=y -CONFIG_XEN_HAVE_VPMU=y -CONFIG_XEN_FRONT_PGDIR_SHBUF=m -# end of Xen driver support - -# CONFIG_GREYBUS is not set -CONFIG_STAGING=y -CONFIG_PRISM2_USB=m -CONFIG_COMEDI=m -# CONFIG_COMEDI_DEBUG is not set -CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048 -CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480 -CONFIG_COMEDI_MISC_DRIVERS=y -CONFIG_COMEDI_BOND=m -CONFIG_COMEDI_TEST=m -CONFIG_COMEDI_PARPORT=m -CONFIG_COMEDI_ISA_DRIVERS=y -CONFIG_COMEDI_PCL711=m -CONFIG_COMEDI_PCL724=m -CONFIG_COMEDI_PCL726=m -CONFIG_COMEDI_PCL730=m -CONFIG_COMEDI_PCL812=m -CONFIG_COMEDI_PCL816=m -CONFIG_COMEDI_PCL818=m -CONFIG_COMEDI_PCM3724=m -CONFIG_COMEDI_AMPLC_DIO200_ISA=m -CONFIG_COMEDI_AMPLC_PC236_ISA=m -CONFIG_COMEDI_AMPLC_PC263_ISA=m -CONFIG_COMEDI_RTI800=m -CONFIG_COMEDI_RTI802=m -CONFIG_COMEDI_DAC02=m -CONFIG_COMEDI_DAS16M1=m -CONFIG_COMEDI_DAS08_ISA=m -CONFIG_COMEDI_DAS16=m -CONFIG_COMEDI_DAS800=m -CONFIG_COMEDI_DAS1800=m -CONFIG_COMEDI_DAS6402=m -CONFIG_COMEDI_DT2801=m -CONFIG_COMEDI_DT2811=m -CONFIG_COMEDI_DT2814=m -CONFIG_COMEDI_DT2815=m -CONFIG_COMEDI_DT2817=m -CONFIG_COMEDI_DT282X=m -CONFIG_COMEDI_DMM32AT=m -CONFIG_COMEDI_FL512=m -CONFIG_COMEDI_AIO_AIO12_8=m -CONFIG_COMEDI_AIO_IIRO_16=m -CONFIG_COMEDI_II_PCI20KC=m -CONFIG_COMEDI_C6XDIGIO=m -CONFIG_COMEDI_MPC624=m -CONFIG_COMEDI_ADQ12B=m -CONFIG_COMEDI_NI_AT_A2150=m -CONFIG_COMEDI_NI_AT_AO=m -CONFIG_COMEDI_NI_ATMIO=m -CONFIG_COMEDI_NI_ATMIO16D=m -CONFIG_COMEDI_NI_LABPC_ISA=m -CONFIG_COMEDI_PCMAD=m -CONFIG_COMEDI_PCMDA12=m -CONFIG_COMEDI_PCMMIO=m -CONFIG_COMEDI_PCMUIO=m -CONFIG_COMEDI_MULTIQ3=m -CONFIG_COMEDI_S526=m -CONFIG_COMEDI_PCI_DRIVERS=m -CONFIG_COMEDI_8255_PCI=m -CONFIG_COMEDI_ADDI_WATCHDOG=m -CONFIG_COMEDI_ADDI_APCI_1032=m -CONFIG_COMEDI_ADDI_APCI_1500=m -CONFIG_COMEDI_ADDI_APCI_1516=m -CONFIG_COMEDI_ADDI_APCI_1564=m -CONFIG_COMEDI_ADDI_APCI_16XX=m -CONFIG_COMEDI_ADDI_APCI_2032=m -CONFIG_COMEDI_ADDI_APCI_2200=m -CONFIG_COMEDI_ADDI_APCI_3120=m -CONFIG_COMEDI_ADDI_APCI_3501=m -CONFIG_COMEDI_ADDI_APCI_3XXX=m -CONFIG_COMEDI_ADL_PCI6208=m -CONFIG_COMEDI_ADL_PCI7X3X=m -CONFIG_COMEDI_ADL_PCI8164=m -CONFIG_COMEDI_ADL_PCI9111=m -CONFIG_COMEDI_ADL_PCI9118=m -CONFIG_COMEDI_ADV_PCI1710=m -CONFIG_COMEDI_ADV_PCI1720=m -CONFIG_COMEDI_ADV_PCI1723=m -CONFIG_COMEDI_ADV_PCI1724=m -CONFIG_COMEDI_ADV_PCI1760=m -CONFIG_COMEDI_ADV_PCI_DIO=m -CONFIG_COMEDI_AMPLC_DIO200_PCI=m -CONFIG_COMEDI_AMPLC_PC236_PCI=m -CONFIG_COMEDI_AMPLC_PC263_PCI=m -CONFIG_COMEDI_AMPLC_PCI224=m -CONFIG_COMEDI_AMPLC_PCI230=m -CONFIG_COMEDI_CONTEC_PCI_DIO=m -CONFIG_COMEDI_DAS08_PCI=m -CONFIG_COMEDI_DT3000=m -CONFIG_COMEDI_DYNA_PCI10XX=m -CONFIG_COMEDI_GSC_HPDI=m -CONFIG_COMEDI_MF6X4=m -CONFIG_COMEDI_ICP_MULTI=m -CONFIG_COMEDI_DAQBOARD2000=m -CONFIG_COMEDI_JR3_PCI=m -CONFIG_COMEDI_KE_COUNTER=m -CONFIG_COMEDI_CB_PCIDAS64=m -CONFIG_COMEDI_CB_PCIDAS=m -CONFIG_COMEDI_CB_PCIDDA=m -CONFIG_COMEDI_CB_PCIMDAS=m -CONFIG_COMEDI_CB_PCIMDDA=m -CONFIG_COMEDI_ME4000=m -CONFIG_COMEDI_ME_DAQ=m -CONFIG_COMEDI_NI_6527=m -CONFIG_COMEDI_NI_65XX=m -CONFIG_COMEDI_NI_660X=m -CONFIG_COMEDI_NI_670X=m -CONFIG_COMEDI_NI_LABPC_PCI=m -CONFIG_COMEDI_NI_PCIDIO=m -CONFIG_COMEDI_NI_PCIMIO=m -CONFIG_COMEDI_RTD520=m -CONFIG_COMEDI_S626=m -CONFIG_COMEDI_MITE=m -CONFIG_COMEDI_NI_TIOCMD=m -CONFIG_COMEDI_PCMCIA_DRIVERS=m -CONFIG_COMEDI_CB_DAS16_CS=m -CONFIG_COMEDI_DAS08_CS=m -CONFIG_COMEDI_NI_DAQ_700_CS=m -CONFIG_COMEDI_NI_DAQ_DIO24_CS=m -CONFIG_COMEDI_NI_LABPC_CS=m -CONFIG_COMEDI_NI_MIO_CS=m -CONFIG_COMEDI_QUATECH_DAQP_CS=m -CONFIG_COMEDI_USB_DRIVERS=m -CONFIG_COMEDI_DT9812=m -CONFIG_COMEDI_NI_USB6501=m -CONFIG_COMEDI_USBDUX=m -CONFIG_COMEDI_USBDUXFAST=m -CONFIG_COMEDI_USBDUXSIGMA=m -CONFIG_COMEDI_VMK80XX=m -CONFIG_COMEDI_8254=m -CONFIG_COMEDI_8255=m -CONFIG_COMEDI_8255_SA=m -CONFIG_COMEDI_KCOMEDILIB=m -CONFIG_COMEDI_AMPLC_DIO200=m -CONFIG_COMEDI_AMPLC_PC236=m -CONFIG_COMEDI_DAS08=m -CONFIG_COMEDI_ISADMA=m -CONFIG_COMEDI_NI_LABPC=m -CONFIG_COMEDI_NI_LABPC_ISADMA=m -CONFIG_COMEDI_NI_TIO=m -CONFIG_COMEDI_NI_ROUTING=m -CONFIG_RTL8192U=m -CONFIG_RTLLIB=m -CONFIG_RTLLIB_CRYPTO_CCMP=m -CONFIG_RTLLIB_CRYPTO_TKIP=m -CONFIG_RTLLIB_CRYPTO_WEP=m -CONFIG_RTL8192E=m -CONFIG_RTL8723BS=m -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -CONFIG_RTS5208=m -CONFIG_VT6655=m -CONFIG_VT6656=m - -# -# IIO staging drivers -# - -# -# Accelerometers -# -CONFIG_ADIS16203=m -CONFIG_ADIS16240=m -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD7816=m -CONFIG_AD7280=m -# end of Analog to digital converters - -# -# Analog digital bi-direction converters -# -CONFIG_ADT7316=m -CONFIG_ADT7316_SPI=m -CONFIG_ADT7316_I2C=m -# end of Analog digital bi-direction converters - -# -# Capacitance to digital converters -# -CONFIG_AD7150=m -CONFIG_AD7746=m -# end of Capacitance to digital converters - -# -# Direct Digital Synthesis -# -CONFIG_AD9832=m -CONFIG_AD9834=m -# end of Direct Digital Synthesis - -# -# Network Analyzer, Impedance Converters -# -CONFIG_AD5933=m -# end of Network Analyzer, Impedance Converters - -# -# Active energy metering IC -# -CONFIG_ADE7854=m -CONFIG_ADE7854_I2C=m -CONFIG_ADE7854_SPI=m -# end of Active energy metering IC - -# -# Resolver to digital converters -# -CONFIG_AD2S1210=m -# end of Resolver to digital converters -# end of IIO staging drivers - -CONFIG_FB_SM750=m - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -CONFIG_SPEAKUP_SYNTH_DUMMY=m -# end of Speakup console speech - -CONFIG_STAGING_MEDIA=y -CONFIG_VIDEO_IPU3_IMGU=m - -# -# soc_camera sensor drivers -# -CONFIG_VIDEO_USBVISION=m - -# -# Android -# -# end of Android - -CONFIG_LTE_GDM724X=m -CONFIG_FIREWIRE_SERIAL=m -CONFIG_FWTTY_MAX_TOTAL_PORTS=64 -CONFIG_FWTTY_MAX_CARD_PORTS=32 -CONFIG_GS_FPGABOOT=m -CONFIG_UNISYSSPAR=y -CONFIG_UNISYS_VISORNIC=m -CONFIG_UNISYS_VISORINPUT=m -CONFIG_UNISYS_VISORHBA=m -CONFIG_FB_TFT=m -CONFIG_FB_TFT_AGM1264K_FL=m -CONFIG_FB_TFT_BD663474=m -CONFIG_FB_TFT_HX8340BN=m -CONFIG_FB_TFT_HX8347D=m -CONFIG_FB_TFT_HX8353D=m -CONFIG_FB_TFT_HX8357D=m -CONFIG_FB_TFT_ILI9163=m -CONFIG_FB_TFT_ILI9320=m -CONFIG_FB_TFT_ILI9325=m -CONFIG_FB_TFT_ILI9340=m -CONFIG_FB_TFT_ILI9341=m -CONFIG_FB_TFT_ILI9481=m -CONFIG_FB_TFT_ILI9486=m -CONFIG_FB_TFT_PCD8544=m -CONFIG_FB_TFT_RA8875=m -CONFIG_FB_TFT_S6D02A1=m -CONFIG_FB_TFT_S6D1121=m -CONFIG_FB_TFT_SEPS525=m -CONFIG_FB_TFT_SH1106=m -CONFIG_FB_TFT_SSD1289=m -CONFIG_FB_TFT_SSD1305=m -CONFIG_FB_TFT_SSD1306=m -CONFIG_FB_TFT_SSD1331=m -CONFIG_FB_TFT_SSD1351=m -CONFIG_FB_TFT_ST7735R=m -CONFIG_FB_TFT_ST7789V=m -CONFIG_FB_TFT_TINYLCD=m -CONFIG_FB_TFT_TLS8204=m -CONFIG_FB_TFT_UC1611=m -CONFIG_FB_TFT_UC1701=m -CONFIG_FB_TFT_UPD161704=m -CONFIG_FB_TFT_WATTEROTT=m -CONFIG_WILC1000=m -CONFIG_WILC1000_SDIO=m -CONFIG_WILC1000_SPI=m -# CONFIG_WILC1000_HW_OOB_INTR is not set -CONFIG_MOST_COMPONENTS=m -CONFIG_MOST_CDEV=m -CONFIG_MOST_NET=m -CONFIG_MOST_SOUND=m -CONFIG_MOST_VIDEO=m -CONFIG_MOST_I2C=m -CONFIG_MOST_USB=m -CONFIG_KS7010=m -# CONFIG_PI433 is not set - -# -# Gasket devices -# -CONFIG_STAGING_GASKET_FRAMEWORK=m -CONFIG_STAGING_APEX_DRIVER=m -# end of Gasket devices - -CONFIG_FIELDBUS_DEV=m -# CONFIG_KPC2000 is not set -CONFIG_QLGE=m -CONFIG_WFX=m -CONFIG_X86_PLATFORM_DEVICES=y -CONFIG_ACPI_WMI=m -CONFIG_WMI_BMOF=m -CONFIG_ALIENWARE_WMI=m -CONFIG_HUAWEI_WMI=m -CONFIG_INTEL_WMI_THUNDERBOLT=m -CONFIG_MXM_WMI=m -CONFIG_PEAQ_WMI=m -CONFIG_XIAOMI_WMI=m -CONFIG_ACERHDF=m -CONFIG_ACER_WIRELESS=m -CONFIG_ACER_WMI=m -CONFIG_APPLE_GMUX=m -CONFIG_ASUS_LAPTOP=m -CONFIG_ASUS_WIRELESS=m -CONFIG_ASUS_WMI=m -CONFIG_ASUS_NB_WMI=m -CONFIG_EEEPC_LAPTOP=m -CONFIG_EEEPC_WMI=m -CONFIG_DCDBAS=m -CONFIG_DELL_SMBIOS=m -CONFIG_DELL_SMBIOS_WMI=y -CONFIG_DELL_SMBIOS_SMM=y -CONFIG_DELL_LAPTOP=m -CONFIG_DELL_RBTN=m -CONFIG_DELL_RBU=m -CONFIG_DELL_SMO8800=m -CONFIG_DELL_WMI=m -CONFIG_DELL_WMI_DESCRIPTOR=m -CONFIG_DELL_WMI_AIO=m -CONFIG_DELL_WMI_LED=m -CONFIG_AMILO_RFKILL=m -CONFIG_FUJITSU_LAPTOP=m -CONFIG_FUJITSU_TABLET=m -CONFIG_GPD_POCKET_FAN=m -CONFIG_HP_ACCEL=m -CONFIG_HP_WIRELESS=m -CONFIG_HP_WMI=m -CONFIG_IBM_RTL=m -CONFIG_IDEAPAD_LAPTOP=m -CONFIG_SENSORS_HDAPS=m -CONFIG_THINKPAD_ACPI=m -CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y -CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y -# CONFIG_THINKPAD_ACPI_DEBUG is not set -# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set -CONFIG_THINKPAD_ACPI_VIDEO=y -CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y -CONFIG_INTEL_ATOMISP2_PM=m -CONFIG_INTEL_CHT_INT33FE=m -CONFIG_INTEL_HID_EVENT=m -CONFIG_INTEL_INT0002_VGPIO=m -CONFIG_INTEL_MENLOW=m -CONFIG_INTEL_OAKTRAIL=m -CONFIG_INTEL_VBTN=m -CONFIG_SURFACE3_WMI=m -CONFIG_SURFACE_3_BUTTON=m -CONFIG_SURFACE_3_POWER_OPREGION=m -CONFIG_SURFACE_PRO3_BUTTON=m -CONFIG_MSI_LAPTOP=m -CONFIG_MSI_WMI=m -CONFIG_PCENGINES_APU2=m -CONFIG_SAMSUNG_LAPTOP=m -CONFIG_SAMSUNG_Q10=m -CONFIG_ACPI_TOSHIBA=m -CONFIG_TOSHIBA_BT_RFKILL=m -CONFIG_TOSHIBA_HAPS=m -CONFIG_TOSHIBA_WMI=m -CONFIG_ACPI_CMPC=m -CONFIG_COMPAL_LAPTOP=m -CONFIG_LG_LAPTOP=m -CONFIG_PANASONIC_LAPTOP=m -CONFIG_SONY_LAPTOP=m -CONFIG_SONYPI_COMPAT=y -CONFIG_SYSTEM76_ACPI=m -CONFIG_TOPSTAR_LAPTOP=m -CONFIG_I2C_MULTI_INSTANTIATE=m -# CONFIG_MLX_PLATFORM is not set -# CONFIG_TOUCHSCREEN_DMI is not set -CONFIG_INTEL_IPS=m -CONFIG_INTEL_RST=m -CONFIG_INTEL_SMARTCONNECT=m - -# -# Intel Speed Select Technology interface support -# -CONFIG_INTEL_SPEED_SELECT_INTERFACE=m -# end of Intel Speed Select Technology interface support - -# CONFIG_INTEL_TURBO_MAX_3 is not set -CONFIG_INTEL_UNCORE_FREQ_CONTROL=m -CONFIG_INTEL_BXTWC_PMIC_TMU=m -CONFIG_INTEL_CHTDC_TI_PWRBTN=m -CONFIG_INTEL_PMC_CORE=y -CONFIG_INTEL_PMC_IPC=m -CONFIG_INTEL_PUNIT_IPC=m -CONFIG_INTEL_TELEMETRY=m -CONFIG_PMC_ATOM=y -CONFIG_MFD_CROS_EC=m -CONFIG_CHROME_PLATFORMS=y -CONFIG_CHROMEOS_LAPTOP=m -CONFIG_CHROMEOS_PSTORE=m -CONFIG_CHROMEOS_TBMC=m -CONFIG_CROS_EC=m -CONFIG_CROS_EC_I2C=m -CONFIG_CROS_EC_ISHTP=m -CONFIG_CROS_EC_SPI=m -CONFIG_CROS_EC_LPC=m -CONFIG_CROS_EC_PROTO=y -CONFIG_CROS_KBD_LED_BACKLIGHT=m -CONFIG_CROS_EC_CHARDEV=m -CONFIG_CROS_EC_LIGHTBAR=m -CONFIG_CROS_EC_DEBUGFS=m -CONFIG_CROS_EC_SENSORHUB=m -CONFIG_CROS_EC_SYSFS=m -CONFIG_CROS_EC_TYPEC=m -CONFIG_CROS_USBPD_LOGGER=m -CONFIG_CROS_USBPD_NOTIFY=m -CONFIG_WILCO_EC=m -# CONFIG_WILCO_EC_DEBUGFS is not set -CONFIG_WILCO_EC_EVENTS=m -CONFIG_WILCO_EC_TELEMETRY=m -# CONFIG_MELLANOX_PLATFORM is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -CONFIG_COMMON_CLK_WM831X=m -CONFIG_COMMON_CLK_MAX9485=m -CONFIG_COMMON_CLK_SI5341=m -CONFIG_COMMON_CLK_SI5351=m -CONFIG_COMMON_CLK_SI544=m -CONFIG_COMMON_CLK_CDCE706=m -CONFIG_COMMON_CLK_CS2000_CP=m -CONFIG_COMMON_CLK_S2MPS11=m -CONFIG_CLK_TWL6040=m -CONFIG_COMMON_CLK_PALMAS=m -CONFIG_COMMON_CLK_PWM=m -# end of Common Clock Framework - -# CONFIG_HWSPINLOCK is not set - -# -# Clock Source drivers -# -CONFIG_CLKEVT_I8253=y -CONFIG_I8253_LOCK=y -CONFIG_CLKBLD_I8253=y -# end of Clock Source drivers - -CONFIG_MAILBOX=y -CONFIG_PCC=y -CONFIG_ALTERA_MBOX=m -CONFIG_IOMMU_IOVA=y -CONFIG_IOASID=y -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -# end of Generic IOMMU Pagetable Support - -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_IOMMU_DMA=y -CONFIG_AMD_IOMMU=y -CONFIG_AMD_IOMMU_V2=m -CONFIG_DMAR_TABLE=y -CONFIG_INTEL_IOMMU=y -CONFIG_INTEL_IOMMU_SVM=y -# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set -CONFIG_INTEL_IOMMU_FLOPPY_WA=y -# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set -CONFIG_IRQ_REMAP=y -CONFIG_HYPERV_IOMMU=y - -# -# Remoteproc drivers -# -# CONFIG_REMOTEPROC is not set -# end of Remoteproc drivers - -# -# Rpmsg drivers -# -CONFIG_RPMSG=m -# CONFIG_RPMSG_CHAR is not set -CONFIG_RPMSG_QCOM_GLINK_NATIVE=m -CONFIG_RPMSG_QCOM_GLINK_RPM=m -CONFIG_RPMSG_VIRTIO=m -# end of Rpmsg drivers - -# CONFIG_SOUNDWIRE is not set - -# -# SOC (System On Chip) specific Drivers -# - -# -# Amlogic SoC drivers -# -# end of Amlogic SoC drivers - -# -# Aspeed SoC drivers -# -# end of Aspeed SoC drivers - -# -# Broadcom SoC drivers -# -# end of Broadcom SoC drivers - -# -# NXP/Freescale QorIQ SoC drivers -# -# end of NXP/Freescale QorIQ SoC drivers - -# -# i.MX SoC drivers -# -# end of i.MX SoC drivers - -# -# Qualcomm SoC drivers -# -# end of Qualcomm SoC drivers - -CONFIG_SOC_TI=y - -# -# Xilinx SoC drivers -# -CONFIG_XILINX_VCU=m -# end of Xilinx SoC drivers -# end of SOC (System On Chip) specific Drivers - -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -CONFIG_DEVFREQ_GOV_PERFORMANCE=y -CONFIG_DEVFREQ_GOV_POWERSAVE=y -CONFIG_DEVFREQ_GOV_USERSPACE=y -CONFIG_DEVFREQ_GOV_PASSIVE=m - -# -# DEVFREQ Drivers -# -CONFIG_PM_DEVFREQ_EVENT=y -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -CONFIG_EXTCON_ADC_JACK=m -CONFIG_EXTCON_ARIZONA=m -CONFIG_EXTCON_AXP288=m -CONFIG_EXTCON_FSA9480=m -CONFIG_EXTCON_GPIO=m -CONFIG_EXTCON_INTEL_INT3496=m -CONFIG_EXTCON_INTEL_CHT_WC=m -CONFIG_EXTCON_MAX14577=m -CONFIG_EXTCON_MAX3355=m -CONFIG_EXTCON_MAX77693=m -CONFIG_EXTCON_MAX77843=m -CONFIG_EXTCON_MAX8997=m -CONFIG_EXTCON_PALMAS=m -CONFIG_EXTCON_PTN5150=m -CONFIG_EXTCON_RT8973A=m -CONFIG_EXTCON_SM5502=m -CONFIG_EXTCON_USB_GPIO=m -CONFIG_EXTCON_USBC_CROS_EC=m -CONFIG_MEMORY=y -CONFIG_IIO=m -CONFIG_IIO_BUFFER=y -CONFIG_IIO_BUFFER_CB=m -CONFIG_IIO_BUFFER_HW_CONSUMER=m -CONFIG_IIO_KFIFO_BUF=m -CONFIG_IIO_TRIGGERED_BUFFER=m -CONFIG_IIO_CONFIGFS=m -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -CONFIG_IIO_SW_DEVICE=m -CONFIG_IIO_SW_TRIGGER=m -CONFIG_IIO_TRIGGERED_EVENT=m - -# -# Accelerometers -# -CONFIG_ADIS16201=m -CONFIG_ADIS16209=m -CONFIG_ADXL372=m -CONFIG_ADXL372_SPI=m -CONFIG_ADXL372_I2C=m -CONFIG_BMA180=m -CONFIG_BMA220=m -CONFIG_BMA400=m -CONFIG_BMA400_I2C=m -CONFIG_BMC150_ACCEL=m -CONFIG_BMC150_ACCEL_I2C=m -CONFIG_BMC150_ACCEL_SPI=m -CONFIG_DA280=m -CONFIG_DA311=m -CONFIG_DMARD09=m -CONFIG_DMARD10=m -CONFIG_HID_SENSOR_ACCEL_3D=m -CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m -CONFIG_IIO_ST_ACCEL_3AXIS=m -CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m -CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m -CONFIG_KXSD9=m -CONFIG_KXSD9_SPI=m -CONFIG_KXSD9_I2C=m -CONFIG_KXCJK1013=m -CONFIG_MC3230=m -CONFIG_MMA7455=m -CONFIG_MMA7455_I2C=m -CONFIG_MMA7455_SPI=m -CONFIG_MMA7660=m -CONFIG_MMA8452=m -CONFIG_MMA9551_CORE=m -CONFIG_MMA9551=m -CONFIG_MMA9553=m -CONFIG_MXC4005=m -CONFIG_MXC6255=m -CONFIG_SCA3000=m -CONFIG_STK8312=m -CONFIG_STK8BA50=m -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD_SIGMA_DELTA=m -CONFIG_AD7091R5=m -CONFIG_AD7124=m -CONFIG_AD7192=m -CONFIG_AD7266=m -CONFIG_AD7291=m -CONFIG_AD7292=m -CONFIG_AD7298=m -CONFIG_AD7476=m -CONFIG_AD7606=m -CONFIG_AD7606_IFACE_PARALLEL=m -CONFIG_AD7606_IFACE_SPI=m -CONFIG_AD7766=m -CONFIG_AD7768_1=m -CONFIG_AD7780=m -CONFIG_AD7791=m -CONFIG_AD7793=m -CONFIG_AD7887=m -CONFIG_AD7923=m -CONFIG_AD7949=m -CONFIG_AD799X=m -CONFIG_AXP20X_ADC=m -CONFIG_AXP288_ADC=m -CONFIG_CC10001_ADC=m -CONFIG_DA9150_GPADC=m -CONFIG_DLN2_ADC=m -CONFIG_HI8435=m -CONFIG_HX711=m -CONFIG_INA2XX_ADC=m -CONFIG_LP8788_ADC=m -CONFIG_LTC2471=m -CONFIG_LTC2485=m -CONFIG_LTC2496=m -CONFIG_LTC2497=m -CONFIG_MAX1027=m -CONFIG_MAX11100=m -CONFIG_MAX1118=m -CONFIG_MAX1363=m -CONFIG_MAX9611=m -CONFIG_MCP320X=m -CONFIG_MCP3422=m -CONFIG_MCP3911=m -CONFIG_MEN_Z188_ADC=m -CONFIG_NAU7802=m -CONFIG_PALMAS_GPADC=m -CONFIG_QCOM_VADC_COMMON=m -CONFIG_QCOM_SPMI_IADC=m -CONFIG_QCOM_SPMI_VADC=m -CONFIG_QCOM_SPMI_ADC5=m -CONFIG_TI_ADC081C=m -CONFIG_TI_ADC0832=m -CONFIG_TI_ADC084S021=m -CONFIG_TI_ADC12138=m -CONFIG_TI_ADC108S102=m -CONFIG_TI_ADC128S052=m -CONFIG_TI_ADC161S626=m -CONFIG_TI_ADS1015=m -CONFIG_TI_ADS7950=m -CONFIG_TI_AM335X_ADC=m -CONFIG_TI_TLC4541=m -CONFIG_TWL4030_MADC=m -CONFIG_TWL6030_GPADC=m -CONFIG_VIPERBOARD_ADC=m -CONFIG_XILINX_XADC=m -# end of Analog to digital converters - -# -# Analog Front Ends -# -# end of Analog Front Ends - -# -# Amplifiers -# -CONFIG_AD8366=m -CONFIG_HMC425=m -# end of Amplifiers - -# -# Chemical Sensors -# -CONFIG_ATLAS_PH_SENSOR=m -CONFIG_BME680=m -CONFIG_BME680_I2C=m -CONFIG_BME680_SPI=m -CONFIG_CCS811=m -CONFIG_IAQCORE=m -CONFIG_PMS7003=m -CONFIG_SENSIRION_SGP30=m -CONFIG_SPS30=m -CONFIG_VZ89X=m -# end of Chemical Sensors - -CONFIG_IIO_CROS_EC_SENSORS_CORE=m -CONFIG_IIO_CROS_EC_SENSORS=m -CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=m - -# -# Hid Sensor IIO Common -# -CONFIG_HID_SENSOR_IIO_COMMON=m -CONFIG_HID_SENSOR_IIO_TRIGGER=m -# end of Hid Sensor IIO Common - -CONFIG_IIO_MS_SENSORS_I2C=m - -# -# SSP Sensor Common -# -CONFIG_IIO_SSP_SENSORS_COMMONS=m -CONFIG_IIO_SSP_SENSORHUB=m -# end of SSP Sensor Common - -CONFIG_IIO_ST_SENSORS_I2C=m -CONFIG_IIO_ST_SENSORS_SPI=m -CONFIG_IIO_ST_SENSORS_CORE=m - -# -# Digital to analog converters -# -CONFIG_AD5064=m -CONFIG_AD5360=m -CONFIG_AD5380=m -CONFIG_AD5421=m -CONFIG_AD5446=m -CONFIG_AD5449=m -CONFIG_AD5592R_BASE=m -CONFIG_AD5592R=m -CONFIG_AD5593R=m -CONFIG_AD5504=m -CONFIG_AD5624R_SPI=m -CONFIG_AD5686=m -CONFIG_AD5686_SPI=m -CONFIG_AD5696_I2C=m -CONFIG_AD5755=m -CONFIG_AD5758=m -CONFIG_AD5761=m -CONFIG_AD5764=m -CONFIG_AD5770R=m -CONFIG_AD5791=m -CONFIG_AD7303=m -CONFIG_AD8801=m -CONFIG_DS4424=m -CONFIG_LTC1660=m -CONFIG_LTC2632=m -CONFIG_M62332=m -CONFIG_MAX517=m -CONFIG_MCP4725=m -CONFIG_MCP4922=m -CONFIG_TI_DAC082S085=m -CONFIG_TI_DAC5571=m -CONFIG_TI_DAC7311=m -CONFIG_TI_DAC7612=m -# end of Digital to analog converters - -# -# IIO dummy driver -# -CONFIG_IIO_SIMPLE_DUMMY=m -# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set -# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set -# end of IIO dummy driver - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# -CONFIG_AD9523=m -# end of Clock Generator/Distribution - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# -CONFIG_ADF4350=m -CONFIG_ADF4371=m -# end of Phase-Locked Loop (PLL) frequency synthesizers -# end of Frequency Synthesizers DDS/PLL - -# -# Digital gyroscope sensors -# -CONFIG_ADIS16080=m -CONFIG_ADIS16130=m -CONFIG_ADIS16136=m -CONFIG_ADIS16260=m -CONFIG_ADXRS450=m -CONFIG_BMG160=m -CONFIG_BMG160_I2C=m -CONFIG_BMG160_SPI=m -CONFIG_FXAS21002C=m -CONFIG_FXAS21002C_I2C=m -CONFIG_FXAS21002C_SPI=m -CONFIG_HID_SENSOR_GYRO_3D=m -CONFIG_MPU3050=m -CONFIG_MPU3050_I2C=m -CONFIG_IIO_ST_GYRO_3AXIS=m -CONFIG_IIO_ST_GYRO_I2C_3AXIS=m -CONFIG_IIO_ST_GYRO_SPI_3AXIS=m -CONFIG_ITG3200=m -# end of Digital gyroscope sensors - -# -# Health Sensors -# - -# -# Heart Rate Monitors -# -CONFIG_AFE4403=m -CONFIG_AFE4404=m -CONFIG_MAX30100=m -CONFIG_MAX30102=m -# end of Heart Rate Monitors -# end of Health Sensors - -# -# Humidity sensors -# -CONFIG_AM2315=m -CONFIG_DHT11=m -CONFIG_HDC100X=m -CONFIG_HID_SENSOR_HUMIDITY=m -CONFIG_HTS221=m -CONFIG_HTS221_I2C=m -CONFIG_HTS221_SPI=m -CONFIG_HTU21=m -CONFIG_SI7005=m -CONFIG_SI7020=m -# end of Humidity sensors - -# -# Inertial measurement units -# -CONFIG_ADIS16400=m -CONFIG_ADIS16460=m -CONFIG_ADIS16480=m -CONFIG_BMI160=m -CONFIG_BMI160_I2C=m -CONFIG_BMI160_SPI=m -CONFIG_FXOS8700=m -CONFIG_FXOS8700_I2C=m -CONFIG_FXOS8700_SPI=m -CONFIG_KMX61=m -CONFIG_INV_MPU6050_IIO=m -CONFIG_INV_MPU6050_I2C=m -CONFIG_INV_MPU6050_SPI=m -CONFIG_IIO_ST_LSM6DSX=m -CONFIG_IIO_ST_LSM6DSX_I2C=m -CONFIG_IIO_ST_LSM6DSX_SPI=m -CONFIG_IIO_ST_LSM6DSX_I3C=m -# end of Inertial measurement units - -CONFIG_IIO_ADIS_LIB=m -CONFIG_IIO_ADIS_LIB_BUFFER=y - -# -# Light sensors -# -CONFIG_ACPI_ALS=m -CONFIG_ADJD_S311=m -CONFIG_ADUX1020=m -CONFIG_AL3010=m -CONFIG_AL3320A=m -CONFIG_APDS9300=m -CONFIG_APDS9960=m -CONFIG_BH1750=m -CONFIG_BH1780=m -CONFIG_CM32181=m -CONFIG_CM3232=m -CONFIG_CM3323=m -CONFIG_CM36651=m -CONFIG_IIO_CROS_EC_LIGHT_PROX=m -CONFIG_GP2AP002=m -CONFIG_GP2AP020A00F=m -CONFIG_IQS621_ALS=m -CONFIG_SENSORS_ISL29018=m -CONFIG_SENSORS_ISL29028=m -CONFIG_ISL29125=m -CONFIG_HID_SENSOR_ALS=m -CONFIG_HID_SENSOR_PROX=m -CONFIG_JSA1212=m -CONFIG_RPR0521=m -CONFIG_SENSORS_LM3533=m -CONFIG_LTR501=m -CONFIG_LV0104CS=m -CONFIG_MAX44000=m -CONFIG_MAX44009=m -CONFIG_NOA1305=m -CONFIG_OPT3001=m -CONFIG_PA12203001=m -CONFIG_SI1133=m -CONFIG_SI1145=m -CONFIG_STK3310=m -CONFIG_ST_UVIS25=m -CONFIG_ST_UVIS25_I2C=m -CONFIG_ST_UVIS25_SPI=m -CONFIG_TCS3414=m -CONFIG_TCS3472=m -CONFIG_SENSORS_TSL2563=m -CONFIG_TSL2583=m -CONFIG_TSL2772=m -CONFIG_TSL4531=m -CONFIG_US5182D=m -CONFIG_VCNL4000=m -CONFIG_VCNL4035=m -CONFIG_VEML6030=m -CONFIG_VEML6070=m -CONFIG_VL6180=m -CONFIG_ZOPT2201=m -# end of Light sensors - -# -# Magnetometer sensors -# -CONFIG_AK8975=m -CONFIG_AK09911=m -CONFIG_BMC150_MAGN=m -CONFIG_BMC150_MAGN_I2C=m -CONFIG_BMC150_MAGN_SPI=m -CONFIG_MAG3110=m -CONFIG_HID_SENSOR_MAGNETOMETER_3D=m -CONFIG_MMC35240=m -CONFIG_IIO_ST_MAGN_3AXIS=m -CONFIG_IIO_ST_MAGN_I2C_3AXIS=m -CONFIG_IIO_ST_MAGN_SPI_3AXIS=m -CONFIG_SENSORS_HMC5843=m -CONFIG_SENSORS_HMC5843_I2C=m -CONFIG_SENSORS_HMC5843_SPI=m -CONFIG_SENSORS_RM3100=m -CONFIG_SENSORS_RM3100_I2C=m -CONFIG_SENSORS_RM3100_SPI=m -# end of Magnetometer sensors - -# -# Multiplexers -# -# end of Multiplexers - -# -# Inclinometer sensors -# -CONFIG_HID_SENSOR_INCLINOMETER_3D=m -CONFIG_HID_SENSOR_DEVICE_ROTATION=m -# end of Inclinometer sensors - -# -# Triggers - standalone -# -CONFIG_IIO_HRTIMER_TRIGGER=m -CONFIG_IIO_INTERRUPT_TRIGGER=m -CONFIG_IIO_TIGHTLOOP_TRIGGER=m -CONFIG_IIO_SYSFS_TRIGGER=m -# end of Triggers - standalone - -# -# Linear and angular position sensors -# -CONFIG_IQS624_POS=m -# end of Linear and angular position sensors - -# -# Digital potentiometers -# -CONFIG_AD5272=m -CONFIG_DS1803=m -CONFIG_MAX5432=m -CONFIG_MAX5481=m -CONFIG_MAX5487=m -CONFIG_MCP4018=m -CONFIG_MCP4131=m -CONFIG_MCP4531=m -CONFIG_MCP41010=m -CONFIG_TPL0102=m -# end of Digital potentiometers - -# -# Digital potentiostats -# -CONFIG_LMP91000=m -# end of Digital potentiostats - -# -# Pressure sensors -# -CONFIG_ABP060MG=m -CONFIG_BMP280=m -CONFIG_BMP280_I2C=m -CONFIG_BMP280_SPI=m -CONFIG_IIO_CROS_EC_BARO=m -CONFIG_DLHL60D=m -CONFIG_DPS310=m -CONFIG_HID_SENSOR_PRESS=m -CONFIG_HP03=m -CONFIG_ICP10100=m -CONFIG_MPL115=m -CONFIG_MPL115_I2C=m -CONFIG_MPL115_SPI=m -CONFIG_MPL3115=m -CONFIG_MS5611=m -CONFIG_MS5611_I2C=m -CONFIG_MS5611_SPI=m -CONFIG_MS5637=m -CONFIG_IIO_ST_PRESS=m -CONFIG_IIO_ST_PRESS_I2C=m -CONFIG_IIO_ST_PRESS_SPI=m -CONFIG_T5403=m -CONFIG_HP206C=m -CONFIG_ZPA2326=m -CONFIG_ZPA2326_I2C=m -CONFIG_ZPA2326_SPI=m -# end of Pressure sensors - -# -# Lightning sensors -# -CONFIG_AS3935=m -# end of Lightning sensors - -# -# Proximity and distance sensors -# -CONFIG_ISL29501=m -CONFIG_LIDAR_LITE_V2=m -CONFIG_MB1232=m -CONFIG_PING=m -CONFIG_RFD77402=m -CONFIG_SRF04=m -CONFIG_SX9500=m -CONFIG_SRF08=m -CONFIG_VL53L0X_I2C=m -# end of Proximity and distance sensors - -# -# Resolver to digital converters -# -CONFIG_AD2S90=m -CONFIG_AD2S1200=m -# end of Resolver to digital converters - -# -# Temperature sensors -# -CONFIG_IQS620AT_TEMP=m -CONFIG_LTC2983=m -CONFIG_MAXIM_THERMOCOUPLE=m -CONFIG_HID_SENSOR_TEMP=m -CONFIG_MLX90614=m -CONFIG_MLX90632=m -CONFIG_TMP006=m -CONFIG_TMP007=m -CONFIG_TSYS01=m -CONFIG_TSYS02D=m -CONFIG_MAX31856=m -# end of Temperature sensors - -CONFIG_NTB=m -CONFIG_NTB_MSI=y -CONFIG_NTB_AMD=m -CONFIG_NTB_IDT=m -CONFIG_NTB_INTEL=m -CONFIG_NTB_SWITCHTEC=m -CONFIG_NTB_PINGPONG=m -CONFIG_NTB_TOOL=m -CONFIG_NTB_PERF=m -CONFIG_NTB_MSI_TEST=m -CONFIG_NTB_TRANSPORT=m -CONFIG_VME_BUS=y - -# -# VME Bridge Drivers -# -CONFIG_VME_CA91CX42=m -CONFIG_VME_TSI148=m -# CONFIG_VME_FAKE is not set - -# -# VME Board Drivers -# -CONFIG_VMIVME_7805=m - -# -# VME Device Drivers -# -CONFIG_VME_USER=m -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -# CONFIG_PWM_DEBUG is not set -CONFIG_PWM_CRC=y -CONFIG_PWM_CROS_EC=m -CONFIG_PWM_LP3943=m -CONFIG_PWM_LPSS=m -CONFIG_PWM_LPSS_PCI=m -CONFIG_PWM_LPSS_PLATFORM=m -CONFIG_PWM_PCA9685=m -CONFIG_PWM_TWL=m -CONFIG_PWM_TWL_LED=m - -# -# IRQ chip support -# -CONFIG_MADERA_IRQ=m -# end of IRQ chip support - -CONFIG_IPACK_BUS=m -CONFIG_BOARD_TPCI200=m -CONFIG_SERIAL_IPOCTAL=m -CONFIG_RESET_CONTROLLER=y -# CONFIG_RESET_BRCMSTB_RESCAL is not set -CONFIG_RESET_TI_SYSCON=m - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -CONFIG_BCM_KONA_USB2_PHY=m -CONFIG_PHY_PXA_28NM_HSIC=m -CONFIG_PHY_PXA_28NM_USB2=m -CONFIG_PHY_CPCAP_USB=m -CONFIG_PHY_QCOM_USB_HS=m -CONFIG_PHY_QCOM_USB_HSIC=m -CONFIG_PHY_SAMSUNG_USB2=m -CONFIG_PHY_TUSB1210=m -CONFIG_PHY_INTEL_EMMC=m -# end of PHY Subsystem - -CONFIG_POWERCAP=y -CONFIG_INTEL_RAPL_CORE=m -CONFIG_INTEL_RAPL=m -# CONFIG_IDLE_INJECT is not set -CONFIG_MCB=m -CONFIG_MCB_PCI=m -CONFIG_MCB_LPC=m - -# -# Performance monitor support -# -# end of Performance monitor support - -CONFIG_RAS=y -# CONFIG_RAS_CEC is not set -CONFIG_USB4=m - -# -# Android -# -# CONFIG_ANDROID is not set -# end of Android - -CONFIG_LIBNVDIMM=y -CONFIG_BLK_DEV_PMEM=m -CONFIG_ND_BLK=m -CONFIG_ND_CLAIM=y -CONFIG_ND_BTT=m -CONFIG_BTT=y -CONFIG_ND_PFN=m -CONFIG_NVDIMM_PFN=y -CONFIG_NVDIMM_DAX=y -CONFIG_NVDIMM_KEYS=y -CONFIG_DAX_DRIVER=y -CONFIG_DAX=y -CONFIG_DEV_DAX=m -CONFIG_DEV_DAX_PMEM=m -CONFIG_DEV_DAX_HMEM=m -CONFIG_DEV_DAX_KMEM=m -CONFIG_DEV_DAX_PMEM_COMPAT=m -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -CONFIG_NVMEM_SPMI_SDAM=m -CONFIG_RAVE_SP_EEPROM=m - -# -# HW tracing support -# -CONFIG_STM=m -CONFIG_STM_PROTO_BASIC=m -CONFIG_STM_PROTO_SYS_T=m -CONFIG_STM_DUMMY=m -CONFIG_STM_SOURCE_CONSOLE=m -CONFIG_STM_SOURCE_HEARTBEAT=m -CONFIG_STM_SOURCE_FTRACE=m -CONFIG_INTEL_TH=m -CONFIG_INTEL_TH_PCI=m -CONFIG_INTEL_TH_ACPI=m -CONFIG_INTEL_TH_GTH=m -CONFIG_INTEL_TH_STH=m -CONFIG_INTEL_TH_MSU=m -CONFIG_INTEL_TH_PTI=m -# CONFIG_INTEL_TH_DEBUG is not set -# end of HW tracing support - -CONFIG_FPGA=m -CONFIG_ALTERA_PR_IP_CORE=m -CONFIG_FPGA_MGR_ALTERA_PS_SPI=m -CONFIG_FPGA_MGR_ALTERA_CVP=m -CONFIG_FPGA_MGR_XILINX_SPI=m -CONFIG_FPGA_MGR_MACHXO2_SPI=m -CONFIG_FPGA_BRIDGE=m -CONFIG_ALTERA_FREEZE_BRIDGE=m -CONFIG_XILINX_PR_DECOUPLER=m -CONFIG_FPGA_REGION=m -CONFIG_FPGA_DFL=m -CONFIG_FPGA_DFL_FME=m -CONFIG_FPGA_DFL_FME_MGR=m -CONFIG_FPGA_DFL_FME_BRIDGE=m -CONFIG_FPGA_DFL_FME_REGION=m -CONFIG_FPGA_DFL_AFU=m -CONFIG_FPGA_DFL_PCI=m -CONFIG_TEE=m - -# -# TEE drivers -# -CONFIG_AMDTEE=m -# end of TEE drivers - -CONFIG_MULTIPLEXER=m - -# -# Multiplexer drivers -# -CONFIG_MUX_ADG792A=m -CONFIG_MUX_ADGS1408=m -CONFIG_MUX_GPIO=m -# end of Multiplexer drivers - -CONFIG_PM_OPP=y -CONFIG_UNISYS_VISORBUS=m -# CONFIG_SIOX is not set -# CONFIG_SLIMBUS is not set -# CONFIG_INTERCONNECT is not set -CONFIG_COUNTER=m -CONFIG_MOST=m -# end of Device Drivers - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y -CONFIG_FS_IOMAP=y -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -CONFIG_EXT4_FS=y -CONFIG_EXT4_USE_FOR_EXT2=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -CONFIG_JFS_STATISTICS=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -# CONFIG_XFS_ONLINE_SCRUB is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -CONFIG_OCFS2_FS_STATS=y -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -# CONFIG_BTRFS_FS_REF_VERIFY is not set -CONFIG_NILFS2_FS=m -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -CONFIG_F2FS_FS_SECURITY=y -# CONFIG_F2FS_CHECK_FS is not set -# CONFIG_F2FS_IO_TRACE is not set -# CONFIG_F2FS_FAULT_INJECTION is not set -# CONFIG_F2FS_FS_COMPRESSION is not set -CONFIG_ZONEFS_FS=m -CONFIG_FS_DAX=y -CONFIG_FS_DAX_PMD=y -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -# CONFIG_EXPORTFS_BLOCK_OPS is not set -CONFIG_FILE_LOCKING=y -CONFIG_MANDATORY_FILE_LOCKING=y -# CONFIG_FS_ENCRYPTION is not set -CONFIG_FS_VERITY=y -# CONFIG_FS_VERITY_DEBUG is not set -# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_QUOTACTL_COMPAT=y -CONFIG_AUTOFS4_FS=m -CONFIG_AUTOFS_FS=m -CONFIG_FUSE_FS=y -CONFIG_CUSE=m -CONFIG_VIRTIO_FS=m -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set -# CONFIG_OVERLAY_FS_INDEX is not set -# CONFIG_OVERLAY_FS_XINO_AUTO is not set -# CONFIG_OVERLAY_FS_METACOPY is not set - -# -# Caches -# -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=m -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set -# end of Caches - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -# end of CD-ROM/DVD Filesystems - -# -# DOS/FAT/EXFAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_FAT_DEFAULT_UTF8 is not set -CONFIG_EXFAT_FS=m -CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -# end of DOS/FAT/EXFAT/NT Filesystems - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_VMCORE=y -# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_CHILDREN=y -CONFIG_PROC_PID_ARCH_STATUS=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_MEMFD_CREATE=y -CONFIG_ARCH_HAS_GIGANTIC_PAGE=y -CONFIG_CONFIGFS_FS=m -CONFIG_EFIVAR_FS=y -# end of Pseudo filesystems - -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ORANGEFS_FS=m -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_ECRYPT_FS=y -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -# CONFIG_JFFS2_CMODE_PRIORITY is not set -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_UBIFS_FS=m -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UBIFS_FS_ZSTD=y -CONFIG_UBIFS_ATIME_SUPPORT=y -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_SECURITY=y -CONFIG_UBIFS_FS_AUTHENTICATION=y -CONFIG_CRAMFS=m -CONFIG_CRAMFS_BLOCKDEV=y -# CONFIG_CRAMFS_MTD is not set -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_FILE_CACHE is not set -CONFIG_SQUASHFS_FILE_DIRECT=y -# CONFIG_SQUASHFS_DECOMP_SINGLE is not set -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -CONFIG_SQUASHFS_LZ4=y -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -# CONFIG_SQUASHFS_ZSTD is not set -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_QNX6FS_FS=m -# CONFIG_QNX6FS_DEBUG is not set -CONFIG_ROMFS_FS=m -CONFIG_ROMFS_BACKED_BY_BLOCK=y -# CONFIG_ROMFS_BACKED_BY_MTD is not set -# CONFIG_ROMFS_BACKED_BY_BOTH is not set -CONFIG_ROMFS_ON_BLOCK=y -CONFIG_PSTORE=y -CONFIG_PSTORE_DEFLATE_COMPRESS=m -# CONFIG_PSTORE_LZO_COMPRESS is not set -# CONFIG_PSTORE_LZ4_COMPRESS is not set -# CONFIG_PSTORE_LZ4HC_COMPRESS is not set -# CONFIG_PSTORE_842_COMPRESS is not set -# CONFIG_PSTORE_ZSTD_COMPRESS is not set -CONFIG_PSTORE_COMPRESS=y -CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y -CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" -# CONFIG_PSTORE_CONSOLE is not set -# CONFIG_PSTORE_PMSG is not set -# CONFIG_PSTORE_FTRACE is not set -CONFIG_PSTORE_RAM=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_ZIP is not set -CONFIG_VBOXSF_FS=m -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V2=m -CONFIG_NFS_V3=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_PNFS_FILE_LAYOUT=m -CONFIG_PNFS_BLOCK=m -CONFIG_PNFS_FLEXFILE_LAYOUT=m -CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" -CONFIG_NFS_V4_1_MIGRATION=y -CONFIG_NFS_V4_SECURITY_LABEL=y -CONFIG_NFS_FSCACHE=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFS_DEBUG=y -# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -# CONFIG_NFSD_BLOCKLAYOUT is not set -# CONFIG_NFSD_SCSILAYOUT is not set -# CONFIG_NFSD_FLEXFILELAYOUT is not set -CONFIG_NFSD_V4_SECURITY_LABEL=y -CONFIG_GRACE_PERIOD=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BACKCHANNEL=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y -CONFIG_SUNRPC_DEBUG=y -CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_CEPH_FS=m -CONFIG_CEPH_FSCACHE=y -CONFIG_CEPH_FS_POSIX_ACL=y -CONFIG_CEPH_FS_SECURITY_LABEL=y -CONFIG_CIFS=m -# CONFIG_CIFS_STATS2 is not set -CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set -CONFIG_CIFS_DFS_UPCALL=y -# CONFIG_CIFS_SMB_DIRECT is not set -CONFIG_CIFS_FSCACHE=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_AFS_FSCACHE=y -# CONFIG_AFS_DEBUG_CURSOR is not set -CONFIG_9P_FS=m -CONFIG_9P_FSCACHE=y -CONFIG_9P_FS_POSIX_ACL=y -CONFIG_9P_FS_SECURITY=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -# CONFIG_DLM_DEBUG is not set -# CONFIG_UNICODE is not set -CONFIG_IO_WQ=y -# end of File systems - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_REQUEST_CACHE=y -CONFIG_PERSISTENT_KEYRINGS=y -CONFIG_BIG_KEYS=y -CONFIG_TRUSTED_KEYS=y -CONFIG_ENCRYPTED_KEYS=y -CONFIG_KEY_DH_OPERATIONS=y -# CONFIG_SECURITY_DMESG_RESTRICT is not set -CONFIG_SECURITY=y -CONFIG_SECURITY_WRITABLE_HOOKS=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -CONFIG_PAGE_TABLE_ISOLATION=y -# CONFIG_SECURITY_INFINIBAND is not set -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_PATH=y -CONFIG_INTEL_TXT=y -CONFIG_LSM_MMAP_MIN_ADDR=0 -CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_HARDENED_USERCOPY_FALLBACK=y -# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set -CONFIG_FORTIFY_SOURCE=y -# CONFIG_STATIC_USERMODEHELPER is not set -CONFIG_SECURITY_SELINUX=y -CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_DISABLE=y -CONFIG_SECURITY_SELINUX_DEVELOP=y -CONFIG_SECURITY_SELINUX_AVC_STATS=y -CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 -CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9 -CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256 -CONFIG_SECURITY_SMACK=y -# CONFIG_SECURITY_SMACK_BRINGUP is not set -CONFIG_SECURITY_SMACK_NETFILTER=y -# CONFIG_SECURITY_SMACK_APPEND_SIGNALS is not set -CONFIG_SECURITY_TOMOYO=y -CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 -CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 -# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set -CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" -CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" -# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set -CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_HASH=y -CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y -# CONFIG_SECURITY_APPARMOR_DEBUG is not set -# CONFIG_SECURITY_LOADPIN is not set -CONFIG_SECURITY_YAMA=y -# CONFIG_SECURITY_SAFESETID is not set -# CONFIG_SECURITY_LOCKDOWN_LSM is not set -CONFIG_INTEGRITY=y -CONFIG_INTEGRITY_SIGNATURE=y -CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y -CONFIG_INTEGRITY_TRUSTED_KEYRING=y -CONFIG_INTEGRITY_AUDIT=y -CONFIG_IMA=y -CONFIG_IMA_MEASURE_PCR_IDX=10 -CONFIG_IMA_LSM_RULES=y -# CONFIG_IMA_TEMPLATE is not set -CONFIG_IMA_NG_TEMPLATE=y -# CONFIG_IMA_SIG_TEMPLATE is not set -CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" -CONFIG_IMA_DEFAULT_HASH_SHA1=y -# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set -# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set -CONFIG_IMA_DEFAULT_HASH="sha1" -# CONFIG_IMA_WRITE_POLICY is not set -# CONFIG_IMA_READ_POLICY is not set -CONFIG_IMA_APPRAISE=y -# CONFIG_IMA_ARCH_POLICY is not set -# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set -CONFIG_IMA_APPRAISE_BOOTPARAM=y -# CONFIG_IMA_APPRAISE_MODSIG is not set -CONFIG_IMA_TRUSTED_KEYRING=y -CONFIG_IMA_BLACKLIST_KEYRING=y -# CONFIG_IMA_LOAD_X509 is not set -CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y -CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y -# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set -CONFIG_EVM=y -CONFIG_EVM_ATTR_FSUUID=y -CONFIG_EVM_EXTRA_SMACK_XATTRS=y -# CONFIG_EVM_ADD_XATTRS is not set -# CONFIG_EVM_LOAD_X509 is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_SMACK is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_APPARMOR=y -# CONFIG_DEFAULT_SECURITY_DAC is not set -CONFIG_LSM="yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo" - -# -# Kernel hardening options -# - -# -# Memory initialization -# -CONFIG_INIT_STACK_NONE=y -CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y -# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set -# end of Memory initialization -# end of Kernel hardening options -# end of Security options - -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_SKCIPHER=y -CONFIG_CRYPTO_SKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_SIMD=m -CONFIG_CRYPTO_GLUE_HELPER_X86=m -CONFIG_CRYPTO_ENGINE=m - -# -# Public-key cryptography -# -CONFIG_CRYPTO_RSA=y -CONFIG_CRYPTO_DH=y -CONFIG_CRYPTO_ECC=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_ECRDSA=m -CONFIG_CRYPTO_CURVE25519=m -CONFIG_CRYPTO_CURVE25519_X86=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=y -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=m -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_ECHAINIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CFB=m -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_OFB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_KEYWRAP=m -CONFIG_CRYPTO_NHPOLY1305=m -CONFIG_CRYPTO_NHPOLY1305_SSE2=m -CONFIG_CRYPTO_NHPOLY1305_AVX2=m -CONFIG_CRYPTO_ADIANTUM=m -CONFIG_CRYPTO_ESSIV=m - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32C_INTEL=y -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRC32_PCLMUL=m -CONFIG_CRYPTO_XXHASH=m -CONFIG_CRYPTO_BLAKE2B=m -CONFIG_CRYPTO_BLAKE2S=m -CONFIG_CRYPTO_BLAKE2S_X86=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m -CONFIG_CRYPTO_GHASH=y -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_POLY1305_X86_64=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA1_SSSE3=m -CONFIG_CRYPTO_SHA256_SSSE3=m -CONFIG_CRYPTO_SHA512_SSSE3=m -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_SHA3=m -CONFIG_CRYPTO_SM3=m -CONFIG_CRYPTO_STREEBOG=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_AES_TI=m -CONFIG_CRYPTO_AES_NI_INTEL=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_BLOWFISH_COMMON=m -CONFIG_CRYPTO_BLOWFISH_X86_64=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAMELLIA_X86_64=m -CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m -CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m -CONFIG_CRYPTO_CAST_COMMON=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST5_AVX_X86_64=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_CAST6_AVX_X86_64=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_DES3_EDE_X86_64=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_CHACHA20_X86_64=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m -CONFIG_CRYPTO_SERPENT_AVX_X86_64=m -CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m -CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_TWOFISH_X86_64=m -CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m -CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_842=m -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m -CONFIG_CRYPTO_ZSTD=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_HASH=y -CONFIG_CRYPTO_DRBG_CTR=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -# CONFIG_CRYPTO_STATS is not set -CONFIG_CRYPTO_HASH_INFO=y - -# -# Crypto library routines -# -CONFIG_CRYPTO_LIB_AES=y -CONFIG_CRYPTO_LIB_ARC4=m -CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=m -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=m -CONFIG_CRYPTO_LIB_BLAKE2S=m -CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m -CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m -CONFIG_CRYPTO_LIB_CHACHA=m -CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=m -CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m -CONFIG_CRYPTO_LIB_CURVE25519=m -CONFIG_CRYPTO_LIB_DES=m -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11 -CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m -CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m -CONFIG_CRYPTO_LIB_POLY1305=m -CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_PADLOCK=y -CONFIG_CRYPTO_DEV_PADLOCK_AES=m -CONFIG_CRYPTO_DEV_PADLOCK_SHA=m -CONFIG_CRYPTO_DEV_ATMEL_I2C=m -CONFIG_CRYPTO_DEV_ATMEL_ECC=m -CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m -CONFIG_CRYPTO_DEV_CCP=y -CONFIG_CRYPTO_DEV_CCP_DD=m -CONFIG_CRYPTO_DEV_SP_CCP=y -CONFIG_CRYPTO_DEV_CCP_CRYPTO=m -CONFIG_CRYPTO_DEV_SP_PSP=y -# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set -CONFIG_CRYPTO_DEV_QAT=m -CONFIG_CRYPTO_DEV_QAT_DH895xCC=m -CONFIG_CRYPTO_DEV_QAT_C3XXX=m -CONFIG_CRYPTO_DEV_QAT_C62X=m -CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m -CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m -CONFIG_CRYPTO_DEV_QAT_C62XVF=m -CONFIG_CRYPTO_DEV_NITROX=m -CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m -CONFIG_CRYPTO_DEV_CHELSIO=m -# CONFIG_CHELSIO_IPSEC_INLINE is not set -CONFIG_CRYPTO_DEV_VIRTIO=m -CONFIG_CRYPTO_DEV_SAFEXCEL=m -CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m -# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y -CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m -CONFIG_X509_CERTIFICATE_PARSER=y -CONFIG_PKCS8_PRIVATE_KEY_PARSER=m -CONFIG_TPM_KEY_PARSER=m -CONFIG_PKCS7_MESSAGE_PARSER=y -# CONFIG_PKCS7_TEST_KEY is not set -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set - -# -# Certificates for signature checking -# -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set -# CONFIG_SECONDARY_TRUSTED_KEYRING is not set -# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -# end of Certificates for signature checking - -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=m -CONFIG_RAID6_PQ_BENCHMARK=y -CONFIG_PACKING=y -CONFIG_BITREVERSE=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_CORDIC=m -CONFIG_RATIONAL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_IOMAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_HAS_FAST_MULTIPLIER=y -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC64=m -# CONFIG_CRC4 is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -CONFIG_CRC8=m -CONFIG_XXHASH=y -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_842_COMPRESS=m -CONFIG_842_DECOMPRESS=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=m -CONFIG_LZ4HC_COMPRESS=m -CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=m -CONFIG_XZ_DEC=y -CONFIG_XZ_DEC_X86=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_TEST=m -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_ENC8=y -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_BCH=m -CONFIG_BCH_CONST_PARAMS=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_BTREE=y -CONFIG_INTERVAL_TREE=y -CONFIG_XARRAY_MULTI=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_VIRT_OPS=y -CONFIG_SWIOTLB=y -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=0 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 -# CONFIG_DMA_API_DEBUG is not set -CONFIG_SGL_ALLOC=y -CONFIG_IOMMU_HELPER=y -CONFIG_CHECK_SIGNATURE=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_LRU_CACHE=m -CONFIG_CLZ_TAB=y -CONFIG_IRQ_POLL=y -CONFIG_MPILIB=y -CONFIG_SIGNATURE=y -CONFIG_DIMLIB=y -CONFIG_OID_REGISTRY=y -CONFIG_UCS2_STRING=y -CONFIG_HAVE_GENERIC_VDSO=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_VDSO_TIME_NS=y -CONFIG_FONT_SUPPORT=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -CONFIG_FONT_6x10=y -# CONFIG_FONT_10x18 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -CONFIG_FONT_TER16x32=y -CONFIG_SG_POOL=y -CONFIG_ARCH_HAS_PMEM_API=y -CONFIG_MEMREGION=y -CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y -CONFIG_ARCH_HAS_UACCESS_MCSAFE=y -CONFIG_ARCH_STACKWALK=y -CONFIG_SBITMAP=y -CONFIG_PARMAN=m -CONFIG_OBJAGG=m -# CONFIG_STRING_SELFTEST is not set -# end of Library routines - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -# CONFIG_PRINTK_CALLER is not set -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 -CONFIG_CONSOLE_LOGLEVEL_QUIET=4 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -CONFIG_BOOT_PRINTK_DELAY=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_SYMBOLIC_ERRNAME=y -CONFIG_DEBUG_BUGVERBOSE=y -# end of printk and dmesg options - -# -# Compile-time checks and compiler options -# -# CONFIG_DEBUG_INFO is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_READABLE_ASM is not set -# CONFIG_HEADERS_INSTALL is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_FRAME_POINTER=y -CONFIG_STACK_VALIDATION=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -# end of Compile-time checks and compiler options - -# -# Generic Kernel Debugging Instruments -# -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -CONFIG_MAGIC_SYSRQ_SERIAL=y -CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE="" -CONFIG_DEBUG_FS=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_KGDB=y -CONFIG_KGDB_SERIAL_CONSOLE=y -# CONFIG_KGDB_TESTS is not set -CONFIG_KGDB_LOW_LEVEL_TRAP=y -CONFIG_KGDB_KDB=y -CONFIG_KDB_DEFAULT_ENABLE=0x1 -CONFIG_KDB_KEYBOARD=y -CONFIG_KDB_CONTINUE_CATASTROPHIC=0 -CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y -# CONFIG_UBSAN is not set -# end of Generic Kernel Debugging Instruments - -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MISC=y - -# -# Memory Debugging -# -# CONFIG_PAGE_EXTENSION is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_PAGE_OWNER is not set -# CONFIG_PAGE_POISONING is not set -# CONFIG_DEBUG_PAGE_REF is not set -# CONFIG_DEBUG_RODATA_TEST is not set -CONFIG_GENERIC_PTDUMP=y -# CONFIG_PTDUMP_DEBUGFS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_SCHED_STACK_END_CHECK=y -# CONFIG_DEBUG_VM is not set -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -# CONFIG_DEBUG_VIRTUAL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m -# CONFIG_DEBUG_PER_CPU_MAPS is not set -CONFIG_HAVE_ARCH_KASAN=y -CONFIG_HAVE_ARCH_KASAN_VMALLOC=y -CONFIG_CC_HAS_KASAN_GENERIC=y -# CONFIG_KASAN is not set -CONFIG_KASAN_STACK=1 -# end of Memory Debugging - -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Oops, Lockups and Hangs -# -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_LOCKUP_DETECTOR=y -CONFIG_SOFTLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_HARDLOCKUP_DETECTOR_PERF=y -CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y -CONFIG_HARDLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -# CONFIG_WQ_WATCHDOG is not set -# CONFIG_TEST_LOCKUP is not set -# end of Debug Oops, Lockups and Hangs - -# -# Scheduler Debugging -# -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -CONFIG_SCHEDSTATS=y -# end of Scheduler Debugging - -# CONFIG_DEBUG_TIMEKEEPING is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -CONFIG_LOCK_DEBUGGING_SUPPORT=y -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -CONFIG_LOCK_TORTURE_TEST=m -CONFIG_WW_MUTEX_SELFTEST=m -# end of Lock Debugging (spinlocks, mutexes, etc...) - -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -# CONFIG_DEBUG_KOBJECT is not set - -# -# Debug kernel data structures -# -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_PLIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BUG_ON_DATA_CORRUPTION is not set -# end of Debug kernel data structures - -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -CONFIG_TORTURE_TEST=m -# CONFIG_RCU_PERF_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# end of RCU Debugging - -# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -# CONFIG_LATENCYTOP is not set -CONFIG_USER_STACKTRACE_SUPPORT=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_FENTRY=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACER_MAX_TRACE=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -# CONFIG_BOOTTIME_TRACING is not set -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -CONFIG_DYNAMIC_FTRACE=y -CONFIG_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y -CONFIG_FUNCTION_PROFILER=y -CONFIG_STACK_TRACER=y -# CONFIG_PREEMPTIRQ_EVENTS is not set -# CONFIG_IRQSOFF_TRACER is not set -CONFIG_SCHED_TRACER=y -# CONFIG_HWLAT_TRACER is not set -CONFIG_MMIOTRACE=y -CONFIG_FTRACE_SYSCALLS=y -CONFIG_TRACER_SNAPSHOT=y -# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_KPROBE_EVENTS=y -# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set -# CONFIG_UPROBE_EVENTS is not set -CONFIG_BPF_EVENTS=y -CONFIG_DYNAMIC_EVENTS=y -CONFIG_PROBE_EVENTS=y -# CONFIG_BPF_KPROBE_OVERRIDE is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_HIST_TRIGGERS is not set -# CONFIG_TRACE_EVENT_INJECT is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_MMIOTRACE_TEST is not set -# CONFIG_PREEMPTIRQ_DELAY_TEST is not set -# CONFIG_KPROBE_EVENT_GEN_TEST is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -# CONFIG_SAMPLES is not set -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -CONFIG_STRICT_DEVMEM=y -CONFIG_IO_STRICT_DEVMEM=y - -# -# x86 Debugging -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_EARLY_PRINTK_USB=y -# CONFIG_X86_VERBOSE_BOOTUP is not set -CONFIG_EARLY_PRINTK=y -CONFIG_EARLY_PRINTK_DBGP=y -# CONFIG_EARLY_PRINTK_USB_XDBC is not set -# CONFIG_EFI_PGT_DUMP is not set -# CONFIG_DEBUG_WX is not set -CONFIG_DOUBLEFAULT=y -# CONFIG_DEBUG_TLBFLUSH is not set -# CONFIG_IOMMU_DEBUG is not set -CONFIG_HAVE_MMIOTRACE_SUPPORT=y -# CONFIG_X86_DECODER_SELFTEST is not set -# CONFIG_IO_DELAY_0X80 is not set -CONFIG_IO_DELAY_0XED=y -# CONFIG_IO_DELAY_UDELAY is not set -# CONFIG_IO_DELAY_NONE is not set -# CONFIG_DEBUG_BOOT_PARAMS is not set -# CONFIG_CPA_DEBUG is not set -# CONFIG_DEBUG_ENTRY is not set -# CONFIG_DEBUG_NMI_SELFTEST is not set -CONFIG_X86_DEBUG_FPU=y -CONFIG_PUNIT_ATOM_DEBUG=m -# CONFIG_UNWINDER_ORC is not set -CONFIG_UNWINDER_FRAME_POINTER=y -# CONFIG_UNWINDER_GUESS is not set -# end of x86 Debugging - -# -# Kernel Testing and Coverage -# -# CONFIG_KUNIT is not set -CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_PM_NOTIFIER_ERROR_INJECT=m -CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m -CONFIG_FUNCTION_ERROR_INJECTION=y -# CONFIG_FAULT_INJECTION is not set -CONFIG_ARCH_HAS_KCOV=y -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -# CONFIG_KCOV is not set -CONFIG_RUNTIME_TESTING_MENU=y -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_MIN_HEAP is not set -# CONFIG_TEST_SORT is not set -# CONFIG_KPROBES_SANITY_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_REED_SOLOMON_TEST is not set -CONFIG_INTERVAL_TREE_TEST=m -CONFIG_PERCPU_TEST=m -# CONFIG_ATOMIC64_SELFTEST is not set -CONFIG_ASYNC_RAID6_TEST=m -CONFIG_TEST_HEXDUMP=m -CONFIG_TEST_STRING_HELPERS=m -CONFIG_TEST_STRSCPY=m -CONFIG_TEST_KSTRTOX=m -CONFIG_TEST_PRINTF=m -CONFIG_TEST_BITMAP=m -CONFIG_TEST_BITFIELD=m -CONFIG_TEST_UUID=m -CONFIG_TEST_XARRAY=m -CONFIG_TEST_OVERFLOW=m -CONFIG_TEST_RHASHTABLE=m -CONFIG_TEST_HASH=m -CONFIG_TEST_IDA=m -CONFIG_TEST_PARMAN=m -CONFIG_TEST_LKM=m -CONFIG_TEST_VMALLOC=m -CONFIG_TEST_USER_COPY=m -CONFIG_TEST_BPF=m -CONFIG_TEST_BLACKHOLE_DEV=m -CONFIG_FIND_BIT_BENCHMARK=m -CONFIG_TEST_FIRMWARE=m -# CONFIG_TEST_SYSCTL is not set -CONFIG_TEST_UDELAY=m -CONFIG_TEST_STATIC_KEYS=m -# CONFIG_TEST_KMOD is not set -# CONFIG_TEST_MEMCAT_P is not set -# CONFIG_TEST_LIVEPATCH is not set -CONFIG_TEST_OBJAGG=m -# CONFIG_TEST_STACKINIT is not set -# CONFIG_TEST_MEMINIT is not set -CONFIG_MEMTEST=y -# CONFIG_HYPERV_TESTING is not set -# end of Kernel Testing and Coverage -# end of Kernel hacking diff --git a/gnu/packages/aux-files/run-in-namespace.c b/gnu/packages/aux-files/run-in-namespace.c index 436c0b6286..52a16a5362 100644 --- a/gnu/packages/aux-files/run-in-namespace.c +++ b/gnu/packages/aux-files/run-in-namespace.c @@ -405,6 +405,23 @@ relocated_search_path (const char *path[], const char *store) return new_path; } +/* Concatenate PATH1 and PATH2 with a colon in between. The result is + potentially malloc'd. */ +static char * +concat_paths (const char *path1, const char *path2) +{ + if (path1[0] == '\0') + return (char *) path2; + else + { + char *result = xmalloc (strlen (path1) + strlen (path2) + 2); + strcpy (result, path1); + strcat (result, ":"); + strcat (result, path2); + return result; + } +} + /* Execute the wrapped program by invoking the loader (ld.so) directly, passing it the audit module and preloading libfakechroot.so. */ static void @@ -421,9 +438,12 @@ exec_with_loader (const char *store, int argc, char *argv[]) loader_argv[2] = concat (store, LOADER_AUDIT_MODULE + sizeof original_store); - /* The audit module depends on libc.so and libgcc_s.so. */ + /* The audit module depends on libc.so and libgcc_s.so so honor + AUDIT_LIBRARY_PATH. Additionally, honor $LD_LIBRARY_PATH if set. */ loader_argv[3] = "--library-path"; - loader_argv[4] = relocated_search_path (audit_library_path, store); + loader_argv[4] = + concat_paths (getenv ("LD_LIBRARY_PATH") ?: "", + relocated_search_path (audit_library_path, store)); loader_argv[5] = "--preload"; loader_argv[6] = concat (store, diff --git a/gnu/packages/backup.scm b/gnu/packages/backup.scm index c8e6f175b1..9cb8e1bd00 100644 --- a/gnu/packages/backup.scm +++ b/gnu/packages/backup.scm @@ -1072,7 +1072,7 @@ interractive mode.") (define-public burp (package (name "burp") - (version "2.3.32") + (version "2.3.34") (source (origin (method git-fetch) @@ -1080,7 +1080,7 @@ interractive mode.") (url "https://github.com/grke/burp") (commit version))) (sha256 - (base32 "0cxxf9ni34c9662ffmr2qc8xmh4g9pmg3swqvhn49mqgr5ra6k2g")) + (base32 "0ri62xshcjrk5vgyx8s11vsllab132mk1pcy4xxl9kzijdsjhdpy")) (file-name (git-file-name name version)))) (build-system gnu-build-system) (arguments diff --git a/gnu/packages/bioconductor.scm b/gnu/packages/bioconductor.scm index 6210a4b3f1..a9f8ff21c5 100644 --- a/gnu/packages/bioconductor.scm +++ b/gnu/packages/bioconductor.scm @@ -3,6 +3,7 @@ ;;; Copyright © 2016, 2017, 2018, 2020 Roel Janssen <roel@gnu.org> ;;; Copyright © 2017, 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2019 Simon Tournier <zimon.toutoune@gmail.com> +;;; Copyright © 2020 Peter Lo <peterloleungyau@gmail.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -1762,6 +1763,7 @@ expressed genes in DNA microarray experiments.") fitting of some classes of graphical Markov models.") (license license:gpl2+))) +;; This is a CRAN package, but it depends on a Bioconductor package. (define-public r-codedepends (package (name "r-codedepends") @@ -1793,14 +1795,14 @@ determining dependencies between variables, code improvement suggestions.") (define-public r-chippeakanno (package (name "r-chippeakanno") - (version "3.22.2") + (version "3.22.3") (source (origin (method url-fetch) (uri (bioconductor-uri "ChIPpeakAnno" version)) (sha256 (base32 - "199mlg0gwjy39afyk0ah6lzcm759bzxla4hgcajj0ay9jiibjqpa")))) + "0q3f55hh0a2hl96272js6gagmgps9cxs8s13pf6fii64rzaz5m7y")))) (properties `((upstream-name . "ChIPpeakAnno"))) (build-system r-build-system) (propagated-inputs @@ -3452,14 +3454,14 @@ surface of a flowcell.") (define-public r-gkmsvm (package (name "r-gkmsvm") - (version "0.80.0") + (version "0.81.0") (source (origin (method url-fetch) (uri (cran-uri "gkmSVM" version)) (sha256 (base32 - "0ljcga246ad0ql8x3drvrdsyp0f20mgp3p6lnl79xb76qgfdnm0p")))) + "119g5rhc7ffyviz04r04aj5z1g6abnj3ddd01g7db505sdr6lapj")))) (properties `((upstream-name . "gkmSVM"))) (build-system r-build-system) (propagated-inputs @@ -4360,14 +4362,14 @@ position-specific scores within R and Bioconductor.") (define-public r-atacseqqc (package (name "r-atacseqqc") - (version "1.12.3") + (version "1.12.4") (source (origin (method url-fetch) (uri (bioconductor-uri "ATACseqQC" version)) (sha256 (base32 - "12710c4024pndwwqiiqr6dhrd360z26fc8r3fxhs739gyd0ddk9r")))) + "1gs9862hhh4gr1akij6ykhcj29s9dzg1vnj87hqrm19dfgl43qbh")))) (properties `((upstream-name . "ATACseqQC"))) (build-system r-build-system) (propagated-inputs @@ -6334,14 +6336,14 @@ self-organizing map clustering and minimal spanning trees.") (define-public r-mixomics (package (name "r-mixomics") - (version "6.12.1") + (version "6.12.2") (source (origin (method url-fetch) (uri (bioconductor-uri "mixOmics" version)) (sha256 (base32 - "13kq9l5xwhwp30y5gfqfh5f11n63vn8rk195mb2y2mww4cwi6lv4")))) + "1nkqlvm9j1f4vfj3f3kyxqgan38rpa9imimvl9pwivvsfl647vvc")))) (properties `((upstream-name . "mixOmics"))) (build-system r-build-system) (propagated-inputs @@ -6460,14 +6462,14 @@ genes in the gene-set that are ranked above the leading edge).") (define-public r-cicero (package (name "r-cicero") - (version "1.6.1") + (version "1.6.2") (source (origin (method url-fetch) (uri (bioconductor-uri "cicero" version)) (sha256 (base32 - "0nf9yqg5krj26n4n82iyx3rsr84d46b17i9zfk35sh12l4xssbii")))) + "042ba6yfa7fksij2v7cwnp2sca3vmz7izn6fsxx9xswnncrkgcqh")))) (build-system r-build-system) (propagated-inputs `(("r-assertthat" ,r-assertthat) @@ -7157,14 +7159,14 @@ data.") (define-public r-activedriverwgs (package (name "r-activedriverwgs") - (version "1.0.1") + (version "1.1.0") (source (origin (method url-fetch) (uri (cran-uri "ActiveDriverWGS" version)) (sha256 (base32 - "08l9dj8d3cd74z1dqn8n4yqykwvqjxsfa067wnxyh7xnfvvnm5v1")))) + "0l6h0f54zjvcx19ngq3kp01dypsjqf28vssjm8yzccmpyacfypag")))) (properties `((upstream-name . "ActiveDriverWGS"))) (build-system r-build-system) @@ -7175,8 +7177,9 @@ data.") ("r-genomeinfodb" ,r-genomeinfodb) ("r-genomicranges" ,r-genomicranges) ("r-iranges" ,r-iranges) - ("r-plyr" ,r-plyr) ("r-s4vectors" ,r-s4vectors))) + (native-inputs + `(("r-knitr" ,r-knitr))) (home-page "https://cran.r-project.org/web/packages/ActiveDriverWGS/") (synopsis "Driver discovery tool for cancer whole genomes") (description @@ -8153,3 +8156,89 @@ user's input and automatically retrieving results from GREAT web server.") simulation to eliminate overestimation of @code{K} and can reject the null hypothesis @code{K=1}.") (license license:agpl3+))) + +(define-public r-icens + (package + (name "r-icens") + (version "1.60.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "Icens" version)) + (sha256 + (base32 + "0fh7wgkrw20f61p06i87nccnbig9wv4m0jcg7cx1rw7g2ndnabgp")))) + (properties `((upstream-name . "Icens"))) + (build-system r-build-system) + (propagated-inputs + `(("r-survival" ,r-survival))) + (home-page "https://bioconductor.org/packages/Icens") + (synopsis "NPMLE for censored and truncated data") + (description + "This package provides many functions for computing the +@dfn{nonparametric maximum likelihood estimator} (NPMLE) for censored and +truncated data.") + (license license:artistic2.0))) + +;; This is a CRAN package but it depends on r-icens, which is published on +;; Bioconductor. +(define-public r-interval + (package + (name "r-interval") + (version "1.1-0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "interval" version)) + (sha256 + (base32 + "1lln9jkli28i4wivwzqrsxvv2n15560f7msjy5gssrm45vxrxms8")))) + (properties `((upstream-name . "interval"))) + (build-system r-build-system) + (propagated-inputs + `(("r-icens" ,r-icens) + ("r-mlecens" ,r-mlecens) + ("r-perm" ,r-perm) + ("r-survival" ,r-survival))) + (home-page "https://cran.r-project.org/web/packages/interval/") + (synopsis "Weighted Logrank tests and NPMLE for interval censored data") + (description + "This package provides functions to fit nonparametric survival curves, +plot them, and perform logrank or Wilcoxon type tests.") + (license license:gpl2+))) + +;; This is a CRAN package, but it depends on r-interval, which depends on a +;; Bioconductor package. +(define-public r-fhtest + (package + (name "r-fhtest") + (version "1.4") + (source + (origin + (method url-fetch) + (uri (cran-uri "FHtest" version)) + (sha256 + (base32 + "1wsn0j9ydpp9nfswiqg21p09kgkvaq8fh0y0h8syqgizah7i8vs2")))) + (properties `((upstream-name . "FHtest"))) + (build-system r-build-system) + (propagated-inputs + `(("r-interval" ,r-interval) + ("r-kmsurv" ,r-kmsurv) + ("r-mass" ,r-mass) + ("r-perm" ,r-perm) + ("r-survival" ,r-survival))) + (home-page "https://cran.r-project.org/web/packages/FHtest/") + (synopsis "Tests for survival data based on the Fleming-Harrington class") + (description + "This package provides functions to compare two or more survival curves +with: + +@itemize +@item The Fleming-Harrington test for right-censored data based on + permutations and on counting processes. +@item An extension of the Fleming-Harrington test for interval-censored data + based on a permutation distribution and on a score vector distribution. +@end itemize +") + (license license:gpl2+))) diff --git a/gnu/packages/bioinformatics.scm b/gnu/packages/bioinformatics.scm index a556354438..ffa2618458 100644 --- a/gnu/packages/bioinformatics.scm +++ b/gnu/packages/bioinformatics.scm @@ -2620,7 +2620,7 @@ with Python.") (define-public delly (package (name "delly") - (version "0.7.9") + (version "0.8.3") (source (origin (method git-fetch) (uri (git-reference @@ -2628,7 +2628,7 @@ with Python.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "034jqsxswy9gqdh2zkgc1js99qkv75ks4xvzgmh0284sraagv61z")) + (base32 "1ibnplgfzj96w8glkx17v7sld3pm402fr5ybmf3h0rlcryabxrqy")) (modules '((guix build utils))) (snippet '(begin @@ -2652,9 +2652,9 @@ with Python.") #t)))))) (inputs `(("boost" ,boost) + ("bzip2" ,bzip2) ("htslib" ,htslib) - ("zlib" ,zlib) - ("bzip2" ,bzip2))) + ("zlib" ,zlib))) (home-page "https://github.com/dellytools/delly") (synopsis "Integrated structural variant prediction method") (description "Delly is an integrated structural variant prediction method @@ -6357,14 +6357,14 @@ bioinformatics file formats, sequence alignment, and more.") (define-public seqmagick (package (name "seqmagick") - (version "0.7.0") + (version "0.8.0") (source (origin (method url-fetch) (uri (pypi-uri "seqmagick" version)) (sha256 (base32 - "12bfyp8nqi0hd36rmj450aygafp01qy3hkbvlwn3bk39pyjjkgg5")))) + "0pf98da7i59q47gwrbx0wjk6xlvbybiwphw80w7h4ydjj0579a2b")))) (build-system python-build-system) (inputs `(("python-biopython" ,python-biopython))) @@ -8510,57 +8510,6 @@ Stephens (1990).") throughput genetic sequencing data sets using regression methods.") (license license:artistic2.0))) -(define-public r-qtl - (package - (name "r-qtl") - (version "1.46-2") - (source - (origin - (method url-fetch) - (uri (string-append "mirror://cran/src/contrib/qtl_" - version ".tar.gz")) - (sha256 - (base32 - "0rbwcnvyy96gq1dsgpxx03pv423qya26h6ws5y0blj3blfdmj83a")))) - (build-system r-build-system) - (home-page "https://rqtl.org/") - (synopsis "R package for analyzing QTL experiments in genetics") - (description "R/qtl is an extension library for the R statistics -system. It is used to analyze experimental crosses for identifying -genes contributing to variation in quantitative traits (so-called -quantitative trait loci, QTLs). - -Using a hidden Markov model, R/qtl estimates genetic maps, to -identify genotyping errors, and to perform single-QTL and two-QTL, -two-dimensional genome scans.") - (license license:gpl3))) - -(define-public r-qtl2 - (package - (name "r-qtl2") - (version "0.22-11") - (source (origin - (method url-fetch) - (uri (cran-uri "qtl2" version)) - (sha256 - (base32 "0dfdzjylqzc92dcszawc8cyinxccjm3p36v9vcq9ma818pqcanmr")))) - (build-system r-build-system) - (propagated-inputs - `(("r-data-table" ,r-data-table) - ("r-jsonlite" ,r-jsonlite) - ("r-rcpp" ,r-rcpp) - ("r-rcppeigen" ,r-rcppeigen) - ("r-rsqlite" ,r-rsqlite) - ("r-yaml" ,r-yaml))) - (home-page "https://kbroman.org/qtl2/") - (synopsis "Quantitative Trait Locus Mapping in Experimental Crosses") - (description - "This package provides a set of tools to perform @dfn{Quantitative Trait -Locus} (QTL) analysis in experimental crosses. It is a reimplementation of the -@code{R/qtl} package to better handle high-dimensional data and complex cross -designs. Broman et al. (2018) <doi:10.1534/genetics.118.301595>.") - (license license:gpl3))) - (define-public r-zlibbioc (package (name "r-zlibbioc") @@ -9444,28 +9393,6 @@ imaging data that can be used in subsequent analyses to adjust for unknown, unmodeled, or latent sources of noise.") (license license:artistic2.0))) -(define-public r-seqminer - (package - (name "r-seqminer") - (version "8.0") - (source - (origin - (method url-fetch) - (uri (cran-uri "seqminer" version)) - (sha256 - (base32 - "00jzj8mwb0zaiwlifd41b26mrq9mzigj18nc29dydi0r42hxg16i")))) - (build-system r-build-system) - (inputs - `(("zlib" ,zlib))) - (home-page "http://seqminer.genomic.codes") - (synopsis "Read nucleotide sequence data (VCF, BCF, and METAL formats)") - (description - "This package provides tools to integrate nucleotide sequencing -data (variant call format, e.g. VCF or BCF) or meta-analysis results in R.") - ;; Any version of the GPL is acceptable - (license (list license:gpl2+ license:gpl3+)))) - (define-public r-raremetals2 (package (name "r-raremetals2") @@ -9498,32 +9425,6 @@ for analyzing gene-level association tests in meta-analyses for binary trait.") (license license:gpl3))) -(define-public r-maldiquant - (package - (name "r-maldiquant") - (version "1.19.3") - (source - (origin - (method url-fetch) - (uri (cran-uri "MALDIquant" version)) - (sha256 - (base32 - "0b7kdz3x4sdq413h1q09l1qhcvdnnwv6fqsqwllks1cd3xy34c57")))) - (properties `((upstream-name . "MALDIquant"))) - (build-system r-build-system) - (home-page "https://cran.r-project.org/web/packages/MALDIquant") - (synopsis "Quantitative analysis of mass spectrometry data") - (description - "This package provides a complete analysis pipeline for matrix-assisted -laser desorption/ionization-time-of-flight (MALDI-TOF) and other -two-dimensional mass spectrometry data. In addition to commonly used plotting -and processing methods it includes distinctive features, namely baseline -subtraction methods such as morphological filters (TopHat) or the -statistics-sensitive non-linear iterative peak-clipping algorithm (SNIP), peak -alignment using warping functions, handling of replicated measurements as well -as allowing spectra with different resolutions.") - (license license:gpl3+))) - (define-public r-protgenerics (package (name "r-protgenerics") @@ -9834,71 +9735,6 @@ contains a number of utilities to explore the MS/MS results and assess missed and irregular enzymatic cleavages, mass measurement accuracy, etc.") (license license:artistic2.0))) -(define-public r-seurat - (package - (name "r-seurat") - (version "3.2.0") - (source (origin - (method url-fetch) - (uri (cran-uri "Seurat" version)) - (sha256 - (base32 - "1vj3dlsqakgnn4x1jz9fkl2cy0jzc5s65h1c20fnamr7lk45pnf2")))) - (properties `((upstream-name . "Seurat"))) - (build-system r-build-system) - (propagated-inputs - `(("r-ape" ,r-ape) - ("r-cluster" ,r-cluster) - ("r-cowplot" ,r-cowplot) - ("r-fitdistrplus" ,r-fitdistrplus) - ("r-future" ,r-future) - ("r-future-apply" ,r-future-apply) - ("r-ggplot2" ,r-ggplot2) - ("r-ggrepel" ,r-ggrepel) - ("r-ggridges" ,r-ggridges) - ("r-httr" ,r-httr) - ("r-ica" ,r-ica) - ("r-igraph" ,r-igraph) - ("r-irlba" ,r-irlba) - ("r-jsonlite" ,r-jsonlite) - ("r-kernsmooth" ,r-kernsmooth) - ("r-leiden" ,r-leiden) - ("r-lmtest" ,r-lmtest) - ("r-mass" ,r-mass) - ("r-matrix" ,r-matrix) - ("r-miniui" ,r-miniui) - ("r-patchwork" ,r-patchwork) - ("r-pbapply" ,r-pbapply) - ("r-plotly" ,r-plotly) - ("r-png" ,r-png) - ("r-rann" ,r-rann) - ("r-rcolorbrewer" ,r-rcolorbrewer) - ("r-rcpp" ,r-rcpp) - ("r-rcppannoy" ,r-rcppannoy) - ("r-rcppeigen" ,r-rcppeigen) - ("r-rcppprogress" ,r-rcppprogress) - ("r-reticulate" ,r-reticulate) - ("r-rlang" ,r-rlang) - ("r-rocr" ,r-rocr) - ("r-rsvd" ,r-rsvd) - ("r-rtsne" ,r-rtsne) - ("r-scales" ,r-scales) - ("r-sctransform" ,r-sctransform) - ("r-shiny" ,r-shiny) - ("r-spatstat" ,r-spatstat) - ("r-tibble" ,r-tibble) - ("r-uwot" ,r-uwot))) - (home-page "http://www.satijalab.org/seurat") - (synopsis "Seurat is an R toolkit for single cell genomics") - (description - "This package is an R package designed for QC, analysis, and -exploration of single cell RNA-seq data. It easily enables widely-used -analytical techniques, including the identification of highly variable genes, -dimensionality reduction; PCA, ICA, t-SNE, standard unsupervised clustering -algorithms; density clustering, hierarchical clustering, k-means, and the -discovery of differentially expressed genes and markers.") - (license license:gpl3))) - (define-public r-aroma-light (package (name "r-aroma-light") @@ -11100,34 +10936,6 @@ are optimized per data type and for subsetted calculations such that both memory usage and processing time is minimized.") (license license:expat))) -(define-public r-phangorn - (package - (name "r-phangorn") - (version "2.5.5") - (source - (origin - (method url-fetch) - (uri (cran-uri "phangorn" version)) - (sha256 - (base32 - "0ihkaykqjmf80d8wrk3saphxvnv58zma6pd13633bd3cwanc33f5")))) - (build-system r-build-system) - (propagated-inputs - `(("r-ape" ,r-ape) - ("r-fastmatch" ,r-fastmatch) - ("r-igraph" ,r-igraph) - ("r-magrittr" ,r-magrittr) - ("r-matrix" ,r-matrix) - ("r-quadprog" ,r-quadprog) - ("r-rcpp" ,r-rcpp))) - (home-page "https://github.com/KlausVigo/phangorn") - (synopsis "Phylogenetic analysis in R") - (description - "Phangorn is a package for phylogenetic analysis in R. It supports -estimation of phylogenetic trees and networks using Maximum Likelihood, -Maximum Parsimony, distance methods and Hadamard conjugation.") - (license license:gpl2+))) - (define-public r-dropbead (let ((commit "d746c6f3b32110428ea56d6a0001ce52a251c247") (revision "2")) @@ -13276,37 +13084,6 @@ analyses in addition to large-scale sequence-level searches.") (supported-systems '("x86_64-linux")) (license license:bsd-3)))) -(define-public r-diversitree - (package - (name "r-diversitree") - (version "0.9-13") - (source - (origin - (method url-fetch) - (uri (cran-uri "diversitree" version)) - (sha256 - (base32 - "00vi4klywi35hd170ksjv3xja3hqqbkcidcnrrlpgv4179k0azix")))) - (build-system r-build-system) - (native-inputs - `(("gfortran" ,gfortran))) - (inputs `(("fftw" ,fftw) ("gsl" ,gsl))) - (propagated-inputs - `(("r-ape" ,r-ape) - ("r-desolve" ,r-desolve) - ("r-rcpp" ,r-rcpp) - ("r-subplex" ,r-subplex))) - (home-page "https://www.zoology.ubc.ca/prog/diversitree") - (synopsis "Comparative 'phylogenetic' analyses of diversification") - (description "This package contains a number of comparative \"phylogenetic\" -methods, mostly focusing on analysing diversification and character evolution. -Contains implementations of \"BiSSE\" (Binary State Speciation and Extinction) -and its unresolved tree extensions, \"MuSSE\" (Multiple State Speciation and -Extinction), \"QuaSSE\", \"GeoSSE\", and \"BiSSE-ness\" Other included methods -include Markov models of discrete and continuous trait evolution and constant -rate speciation and extinction.") - (license license:gpl2+))) - (define-public sjcount ;; There is no tag for version 3.2, nor is there a release archive. (let ((commit "292d3917cadb3f6834c81e509c30e61cd7ead6e5") @@ -14306,33 +14083,6 @@ downstream analysis. Poretools operates directly on the native FAST5, a variant of the Hierarchical Data Format (HDF5) standard.") (license license:expat)))) -(define-public r-absfiltergsea - (package - (name "r-absfiltergsea") - (version "1.5.1") - (source - (origin - (method url-fetch) - (uri (cran-uri "AbsFilterGSEA" version)) - (sha256 - (base32 "15srxkxsvn38kd5frdrwfdf0ad8gskrd0h01wmdf9hglq8fjrp7w")))) - (properties `((upstream-name . "AbsFilterGSEA"))) - (build-system r-build-system) - (propagated-inputs - `(("r-biobase" ,r-biobase) - ("r-deseq" ,r-deseq) - ("r-limma" ,r-limma) - ("r-rcpp" ,r-rcpp) - ("r-rcpparmadillo" ,r-rcpparmadillo))) - (home-page "https://cran.r-project.org/web/packages/AbsFilterGSEA/") - (synopsis "Improved false positive control of gene-permuting with absolute filtering") - (description - "This package provides a function that performs gene-permuting of a gene-set -enrichment analysis (GSEA) calculation with or without the absolute filtering. - Without filtering, users can perform (original) two-tailed or one-tailed -absolute GSEA.") - (license license:gpl2))) - (define-public jamm (package (name "jamm") @@ -15400,12 +15150,34 @@ mutations from scRNA-Seq data.") (string-append "HTS_LIB=" htslib-ref "/lib/libhts.a") (string-append "INCLUDES= -I" htslib-ref "/include/htslib") "HTS_HEADERS=" ; No need to check for headers here. - (string-append "LIBPATH=-L. -L" htslib-ref "/include"))))) + (string-append "LIBPATH=-L. -L" htslib-ref "/include")) + (invoke "g++" "-shared" "-o" "libtabixpp.so" "tabix.o" "-lhts") + (invoke "ar" "rcs" "libtabixpp.a" "tabix.o")))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) - (let ((bin (string-append (assoc-ref outputs "out") "/bin"))) - (install-file "tabix++" bin)) - #t))))) + (let* ((out (assoc-ref outputs "out")) + (lib (string-append out "/lib")) + (bin (string-append out "/bin"))) + (install-file "tabix++" bin) + (install-file "libtabixpp.so" lib) + (install-file "libtabixpp.a" lib) + (install-file "tabix.hpp" (string-append out "/include")) + (mkdir-p (string-append lib "/pkgconfig")) + (with-output-to-file (string-append lib "/pkgconfig/tabixpp.pc") + (lambda _ + (format #t "prefix=~a~@ + exec_prefix=${prefix}~@ + libdir=${exec_prefix}/lib~@ + includedir=${prefix}/include~@ + ~@ + ~@ + Name: libtabixpp~@ + Version: ~a~@ + Description: C++ wrapper around tabix project~@ + Libs: -L${libdir} -ltabixpp~@ + Cflags: -I${includedir}~%" + out ,version))) + #t)))))) (home-page "https://github.com/ekg/tabixpp") (synopsis "C++ wrapper around tabix project") (description "This is a C++ wrapper around the Tabix project which abstracts @@ -15432,13 +15204,45 @@ some of the details of opening and jumping in tabix-indexed files.") #:phases (modify-phases %standard-phases (delete 'configure) ; There is no configure phase. + (add-after 'unpack 'patch-source + (lambda _ + (substitute* "Makefile" + (("-c ") "-c -fPIC ")) + #t)) + (add-after 'build 'build-dynamic + (lambda _ + (invoke "g++" + "-shared" "-o" "libsmithwaterman.so" + "smithwaterman.o" "SmithWatermanGotoh.o" + "disorder.o" "BandedSmithWaterman.o" + "LeftAlign.o" "Repeats.o" "IndelAllele.o"))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (lib (string-append out "/lib"))) (install-file "smithwaterman" bin) - (install-file "libsw.a" lib)) + (for-each + (lambda (file) + (install-file file (string-append out "/include/smithwaterman"))) + (find-files "." "\\.h$")) + (install-file "libsmithwaterman.so" lib) + (install-file "libsw.a" lib) + (mkdir-p (string-append lib "/pkgconfig")) + (with-output-to-file (string-append lib "/pkgconfig/smithwaterman.pc") + (lambda _ + (format #t "prefix=~a~@ + exec_prefix=${prefix}~@ + libdir=${exec_prefix}/lib~@ + includedir=${prefix}/include/smithwaterman~@ + ~@ + ~@ + Name: smithwaterman~@ + Version: ~a~@ + Description: smith-waterman-gotoh alignment algorithm~@ + Libs: -L${libdir} -lsmithwaterman~@ + Cflags: -I${includedir}~%" + out ,version)))) #t))))) (home-page "https://github.com/ekg/smithwaterman") (synopsis "Implementation of the Smith-Waterman algorithm") @@ -15528,10 +15332,43 @@ neural networks.") #:phases (modify-phases %standard-phases (delete 'configure) ; There is no configure phase. + (add-after 'unpack 'patch-source + (lambda _ + (substitute* "Makefile" + (("-c ") "-c -fPIC ")) + #t)) + (add-after 'build 'build-dynamic + (lambda _ + (invoke "g++" + "-shared" "-o" "libfastahack.so" + "Fasta.o" "FastaHack.o" "split.o" "disorder.o"))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) - (let ((bin (string-append (assoc-ref outputs "out") "/bin"))) - (install-file "fastahack" bin)) + (let* ((out (assoc-ref outputs "out")) + (lib (string-append out "/lib")) + (bin (string-append out "/bin"))) + (mkdir-p (string-append out "/include/fastahack")) + (for-each + (lambda (file) + (install-file file (string-append out "/include/fastahack"))) + (find-files "." "\\.h$")) + (install-file "fastahack" bin) + (install-file "libfastahack.so" lib) + (mkdir-p (string-append lib "/pkgconfig")) + (with-output-to-file (string-append lib "/pkgconfig/fastahack.pc") + (lambda _ + (format #t "prefix=~a~@ + exec_prefix=${prefix}~@ + libdir=${exec_prefix}/lib~@ + includedir=${prefix}/include/fastahack~@ + ~@ + ~@ + Name: fastahack~@ + Version: ~a~@ + Description: Indexing and sequence extraction from FASTA files~@ + Libs: -L${libdir} -lfastahack~@ + Cflags: -I${includedir}~%" + out ,version)))) #t))))) (home-page "https://github.com/ekg/fastahack") (synopsis "Indexing and sequence extraction from FASTA files") @@ -15554,9 +15391,16 @@ library automatically handles index file generation and use.") "/vcflib-" version "-src.tar.gz")) (sha256 (base32 "14zzrg8hg8cq9cvq2wdvp21j7nmxxkjrbagw2apd2yqv2kyx42lm")) + (patches (search-patches "vcflib-use-shared-libraries.patch")) (modules '((guix build utils))) (snippet `(begin + (substitute* (find-files "." "\\.(h|c)(pp)?$") + (("\"SmithWatermanGotoh.h\"") "<smithwaterman/SmithWatermanGotoh.h>") + (("\"convert.h\"") "<smithwaterman/convert.h>") + (("\"disorder.h\"") "<smithwaterman/disorder.h>") + (("\"tabix.hpp\"") "<tabix.hpp>") + (("\"Fasta.h\"") "<fastahack/Fasta.h>")) (for-each delete-file-recursively '("fastahack" "filevercmp" "fsom" "googletest" "intervaltree" "libVCFH" "multichoose" "smithwaterman" "tabixpp")) @@ -15564,34 +15408,34 @@ library automatically handles index file generation and use.") (build-system gnu-build-system) (inputs `(("htslib" ,htslib) + ("fastahack" ,fastahack) ("perl" ,perl) ("python" ,python) + ("smithwaterman" ,smithwaterman) + ("tabixpp" ,tabixpp) + ("xz" ,xz) ("zlib" ,zlib))) (native-inputs - `(;; Submodules. + `(("pkg-config" ,pkg-config) + ;; Submodules. ;; This package builds against the .o files so we need to extract the source. - ("fastahack-src" ,(package-source fastahack)) ("filevercmp-src" ,(package-source filevercmp)) - ("fsom-src" ,(package-source fsom)) ("intervaltree-src" ,(package-source intervaltree)) - ("multichoose-src" ,(package-source multichoose)) - ("smithwaterman-src" ,(package-source smithwaterman)) - ("tabixpp-src" ,(package-source tabixpp)))) + ("multichoose-src" ,(package-source multichoose)))) (arguments `(#:tests? #f ; no tests - #:make-flags (list (string-append "HTS_LIB=" - (assoc-ref %build-inputs "htslib") - "/lib/libhts.a") - (string-append "HTS_INCLUDES= -I" - (assoc-ref %build-inputs "htslib") - "/include/htslib") - (string-append "HTS_LDFLAGS= -L" - (assoc-ref %build-inputs "htslib") - "/include/htslib" " -lhts")) #:phases (modify-phases %standard-phases + (add-after 'unpack 'set-flags + (lambda* (#:key outputs #:allow-other-keys) + (substitute* "Makefile" + (("LDFLAGS =") + (string-append "LDFLAGS = -Wl,-rpath=" + (assoc-ref outputs "out") "/lib "))) + (substitute* "filevercmp/Makefile" + (("-c") "-c -fPIC")) + #t)) (delete 'configure) - (delete 'check) (add-after 'unpack 'unpack-submodule-sources (lambda* (#:key inputs #:allow-other-keys) (let ((unpack (lambda (source target) @@ -15603,34 +15447,39 @@ library automatically handles index file generation and use.") (assoc-ref inputs source) "--strip-components=1")))))) (and - (unpack "fastahack-src" "fastahack") (unpack "filevercmp-src" "filevercmp") - (unpack "fsom-src" "fsom") (unpack "intervaltree-src" "intervaltree") - (unpack "multichoose-src" "multichoose") - (unpack "smithwaterman-src" "smithwaterman") - (unpack "tabixpp-src" "tabixpp"))))) - (replace 'build - (lambda* (#:key inputs make-flags #:allow-other-keys) - (let ((htslib (assoc-ref inputs "htslib"))) - (with-directory-excursion "tabixpp" - (substitute* "Makefile" - (("-Ihtslib") (string-append "-I" htslib "/include/htslib")) - (("-Lhtslib") (string-append "-L" htslib "/lib/htslib")) - (("htslib/htslib") (string-append htslib "/include/htslib"))) - (invoke "make" - (string-append "HTS_LIB=" htslib "/lib/libhts.a"))) - (apply invoke "make" "CC=gcc" "CFLAGS=-Itabixpp" make-flags)))) + (unpack "multichoose-src" "multichoose"))))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) - (let ((bin (string-append (assoc-ref outputs "out") "/bin")) - (lib (string-append (assoc-ref outputs "out") "/lib"))) + (let* ((out (assoc-ref outputs "out")) + (bin (string-append out "/bin")) + (lib (string-append out "/lib"))) (for-each (lambda (file) (install-file file bin)) (find-files "bin" ".*")) - ;; The header files in src/ do not interface libvcflib, - ;; therefore they are left out. - (install-file "libvcflib.a" lib)) + (install-file "libvcflib.so" lib) + (install-file "libvcflib.a" lib) + (for-each + (lambda (file) + (install-file file (string-append out "/include"))) + (find-files "include" "\\.h(pp)?$")) + (mkdir-p (string-append lib "/pkgconfig")) + (with-output-to-file (string-append lib "/pkgconfig/vcflib.pc") + (lambda _ + (format #t "prefix=~a~@ + exec_prefix=${prefix}~@ + libdir=${exec_prefix}/lib~@ + includedir=${prefix}/include~@ + ~@ + ~@ + Name: libvcflib~@ + Version: ~a~@ + Requires: smithwaterman, fastahack~@ + Description: C++ library for parsing and manipulating VCF files~@ + Libs: -L${libdir} -lvcflib~@ + Cflags: -I${includedir}~%" + out ,version)))) #t))))) (home-page "https://github.com/vcflib/vcflib/") (synopsis "Library for parsing and manipulating VCF files") diff --git a/gnu/packages/bittorrent.scm b/gnu/packages/bittorrent.scm index f54e568b55..2a4339fda0 100644 --- a/gnu/packages/bittorrent.scm +++ b/gnu/packages/bittorrent.scm @@ -34,6 +34,7 @@ #:use-module (guix build-system python) #:use-module (guix build-system glib-or-gtk) #:use-module ((guix licenses) #:prefix l:) + #:use-module (guix utils) #:use-module (gnu packages) #:use-module (gnu packages adns) #:use-module (gnu packages boost) @@ -55,6 +56,7 @@ #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) #:use-module (gnu packages python-crypto) + #:use-module (gnu packages python-web) #:use-module (gnu packages python-xyz) #:use-module (gnu packages qt) #:use-module (gnu packages sqlite) @@ -465,29 +467,65 @@ features.") (define-public deluge (package (name "deluge") - (version "1.3.15") + (version "2.0.3") (source (origin (method url-fetch) (uri (string-append - "http://download.deluge-torrent.org/source/deluge-" - version ".tar.xz")) + "https://ftp.osuosl.org/pub/deluge/source/" + (version-major+minor version) "/deluge-" version ".tar.xz")) (sha256 (base32 - "0b7rri4x0wrcj7rjghrnw1kfrsd5i7i6aq85dsg5dg1w1qa0ar59")))) + "14d8kn2pvr1qv8mwqrxmj85jycr73vwfqz12hzag0ararbkfhyky")))) (build-system python-build-system) - (inputs - `(("libtorrent" ,libtorrent-rasterbar) - ("python2-chardet" ,python2-chardet) - ("python2-pygtk" ,python2-pygtk) - ("python2-pyopenssl" ,python2-pyopenssl) - ("python2-pyxdg" ,python2-pyxdg) - ("python2-service-identity" ,python2-service-identity) - ("python2-twisted" ,python2-twisted))) + (propagated-inputs + `(("gtk+" ,gtk+) + ("librsvg" ,librsvg) + ("libtorrent" ,libtorrent-rasterbar) + ("python-pycairo" ,python-pycairo) + ("python-chardet" ,python-chardet) + ("python-dbus" ,python-dbus) + ("python-mako" ,python-mako) + ("python-pygobject" ,python-pygobject) + ("python-pillow" ,python-pillow) + ("python-pyopenssl" ,python-pyopenssl) + ("python-pyxdg" ,python-pyxdg) + ("python-rencode" ,python-rencode) + ("python-service-identity" ,python-service-identity) + ("python-setproctitle" ,python-setproctitle) + ("python-six" ,python-six) + ("python-twisted" ,python-twisted) + ("python-zope-interface" ,python-zope-interface))) (native-inputs - `(("intltool" ,intltool))) + `(("intltool" ,intltool) + ("python-wheel" ,python-wheel))) + ;; TODO: Enable tests. + ;; After "pytest-twisted" is packaged, HOME is set, and an X server is + ;; started, some of the tests still fail. There are likely some tests + ;; that require a network connection. (arguments - `(#:python ,python-2)) + `(#:tests? #f + #:phases + (modify-phases %standard-phases + ;; Remove this phase when upgrading to version 2.0.4 or beyond, as + ;; the issue is fixed upstream. + (add-after 'unpack 'fix-gettext-warning + (lambda _ + (substitute* "deluge/i18n/util.py" + (("names='ngettext'") "names=['ngettext']")) + #t)) + (add-after 'install 'wrap + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out")) + (gi-typelib-path (getenv "GI_TYPELIB_PATH"))) + (for-each + (lambda (program) + (wrap-program program + `("GI_TYPELIB_PATH" ":" prefix (,gi-typelib-path)))) + (map (lambda (name) + (string-append out "/bin/" name)) + '("deluge" "deluge-gtk")))) + #t))))) (home-page "https://www.deluge-torrent.org/") (synopsis "Fully-featured cross-platform BitTorrent client") (description diff --git a/gnu/packages/build-tools.scm b/gnu/packages/build-tools.scm index c3bb3042a6..319688a20d 100644 --- a/gnu/packages/build-tools.scm +++ b/gnu/packages/build-tools.scm @@ -89,7 +89,7 @@ makes a few sacrifices to acquire fast full and incremental build times.") (define-public bear (package (name "bear") - (version "2.4.3") + (version "2.4.4") (source (origin (method git-fetch) (uri (git-reference @@ -98,7 +98,7 @@ makes a few sacrifices to acquire fast full and incremental build times.") (file-name (git-file-name name version)) (sha256 (base32 - "19fk4flfykbzhb89ppmzqf0zlrkbjm6ajl9fsayndj9km5ys0041")))) + "184dqjcpxiwcfziyi67zzran2c4fal1r3j8nhjdjadcmfxf4389d")))) (build-system cmake-build-system) (inputs `(("python" ,python-wrapper))) @@ -211,6 +211,21 @@ files}, are written in a custom domain-specific language (@dfn{DSL}) that resembles Python.") (license license:asl2.0))) +;; Added temporarily for packages that need it. +;; TODO: Remove when core-updates is merged. +(define-public meson-0.55 + (package + (inherit meson) + (version "0.55.1") + (source (origin + (method url-fetch) + (uri (string-append "https://github.com/mesonbuild/meson/" + "releases/download/" version "/meson-" + version ".tar.gz")) + (sha256 + (base32 + "1070kjiirxxdfppmrhi3wsc6rykay1zlciqrzayjhjg0hkw42mrv")))))) + (define-public meson-for-build (package (inherit meson) diff --git a/gnu/packages/chez.scm b/gnu/packages/chez.scm index b80421d3f7..df9d68a55c 100644 --- a/gnu/packages/chez.scm +++ b/gnu/packages/chez.scm @@ -240,7 +240,9 @@ and 32-bit PowerPC architectures.") `(("chez-scheme" ,chez-scheme))) (arguments `(#:make-flags (let ((out (assoc-ref %outputs "out"))) - (list (string-append "PREFIX=" out))) + (list (string-append "PREFIX=" out) + "CHEZ=chez-scheme --libdirs ./" + (string-append "chezversion=" ,(package-version chez-scheme)))) #:test-target "test" #:phases (modify-phases %standard-phases (delete 'configure)))) @@ -414,9 +416,13 @@ Chez Scheme.") ;; files. (define (chez-make-flags name version) `(let ((out (assoc-ref %outputs "out"))) - (list (string-append "PREFIX=" out) - (string-append "DOCDIR=" out "/share/doc/" - ,name "-" ,version)))) + (list + ;; Set 'chezversion' so that libraries are installed in + ;; 'lib/csvX.Y.Z-site' like Chez's 'native-search-paths' expects. + (string-append "chezversion=" ,(package-version chez-scheme)) + (string-append "PREFIX=" out) + (string-append "DOCDIR=" out "/share/doc/" + ,name "-" ,version)))) (define-public chez-matchable (package diff --git a/gnu/packages/ci.scm b/gnu/packages/ci.scm index 0eec48ab18..5f7baebe20 100644 --- a/gnu/packages/ci.scm +++ b/gnu/packages/ci.scm @@ -47,8 +47,8 @@ #:use-module (guix build-system gnu)) (define-public cuirass - (let ((commit "f2984c7230f69a6e50810edc5e9d36bd671801f9") - (revision "43")) + (let ((commit "cf11b73db00678b45b70108768138d0fb74d9506") + (revision "45")) (package (name "cuirass") (version (git-version "0.0.1" revision commit)) @@ -60,7 +60,7 @@ (file-name (git-file-name name version)) (sha256 (base32 - "1p9mlmhv4kz8wixgywh1ffm3140p4mkgz92n7ry3n5s9w5n7fpjl")))) + "1f7jqnscy8vjqrpgl4cyynrvbx6zp3slsd82fykap6qvvwwn7xj8")))) (build-system gnu-build-system) (arguments '(#:modules ((guix build utils) diff --git a/gnu/packages/code.scm b/gnu/packages/code.scm index 6229a04deb..3eaefc4e89 100644 --- a/gnu/packages/code.scm +++ b/gnu/packages/code.scm @@ -125,14 +125,14 @@ highlighting your own code that seemed comprehensible when you wrote it.") (define-public global ; a global variable (package (name "global") - (version "6.6.4") + (version "6.6.5") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/global/global-" version ".tar.gz")) (sha256 (base32 - "1515642wsjz7x3rsgaqk4sc7n0z2znl7idsk8jz8wgy5aswqqzlq")))) + "10vvsgx8v54whb4j9mk5qqyb5h3rdd9da0il3wir8pcpksyk0dww")))) (build-system gnu-build-system) (inputs `(("ncurses" ,ncurses) ("libltdl" ,libltdl) diff --git a/gnu/packages/commencement.scm b/gnu/packages/commencement.scm index d38005a5ab..576fc05369 100644 --- a/gnu/packages/commencement.scm +++ b/gnu/packages/commencement.scm @@ -3851,7 +3851,8 @@ COREUTILS-FINAL vs. COREUTILS, etc." (description "This package provides a complete GCC tool chain for C/C++ development to be installed in user profiles. This includes GCC, as well as libc (headers and -binaries, plus debugging symbols in the @code{debug} output), and Binutils.") +binaries, plus debugging symbols in the @code{debug} output), and Binutils. GCC +is the GNU Compiler Collection.") (home-page "https://gcc.gnu.org/") (outputs '("out" "debug" "static")) @@ -3892,6 +3893,12 @@ binaries, plus debugging symbols in the @code{debug} output), and Binutils.") (define-public gcc-toolchain-10 (make-gcc-toolchain gcc-10)) +(define-public gcc-toolchain-aka-gcc + ;; It's natural for users to try "guix install gcc". This package + ;; automatically "redirects" them to 'gcc-toolchain'. + (deprecated-package "gcc" gcc-toolchain-10)) + + (define-public gdc-toolchain-10 (package (inherit (make-gcc-toolchain gdc-10)) (synopsis "Complete GCC tool chain for D lang development") diff --git a/gnu/packages/coq.scm b/gnu/packages/coq.scm index 166e66c09e..e57e40c2ad 100644 --- a/gnu/packages/coq.scm +++ b/gnu/packages/coq.scm @@ -4,6 +4,8 @@ ;;; Copyright © 2019 Dan Frumin <dfrumin@cs.ru.nl> ;;; Copyright © 2020 Brett Gilio <brettg@gnu.org> ;;; Copyright © 2020 Björn Höfling <bjoern.hoefling@bjoernhoefling.de> +;;; Copyright © 2020 raingloom <raingloom@riseup.net> +;;; Copyright © 2020 Robin Green <greenrd@greenrd.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -33,6 +35,7 @@ #:use-module (gnu packages ocaml) #:use-module (gnu packages perl) #:use-module (gnu packages python) + #:use-module (gnu packages rsync) #:use-module (gnu packages texinfo) #:use-module (guix build-system gnu) #:use-module (guix build-system ocaml) @@ -46,7 +49,7 @@ (define-public coq (package (name "coq") - (version "8.10.2") + (version "8.11.2") (source (origin (method git-fetch) @@ -56,7 +59,7 @@ (file-name (git-file-name name version)) (sha256 (base32 - "0ji2rzd70b3hcwfw97qk7rv3m2977ylqnq82l1555dp3njr8nm3q")))) + "1gia82dkmzqspw2w3s4gjyh39ghbmw4i41i4hyzc91g7mza17nbz")))) (native-search-paths (list (search-path-specification (variable "COQPATH") @@ -69,7 +72,9 @@ ("camlp5" ,camlp5) ("ocaml-num" ,ocaml-num))) (native-inputs - `(("ocaml-ounit" ,ocaml-ounit))) + `(("ocaml-ounit" ,ocaml-ounit) + ("rsync" ,rsync) + ("which" ,which))) (arguments `(#:phases (modify-phases %standard-phases @@ -96,11 +101,18 @@ (add-after 'install 'remove-duplicate (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) - (bin (string-append out "/bin"))) + (bin (string-append out "/bin")) + (coqtop (string-append bin "/coqtop")) + (coqidetop (string-append bin "/coqidetop")) + (coqtop.opt (string-append coqtop ".opt")) + (coqidetop.opt (string-append coqidetop ".opt"))) ;; These files are exact copies without `.opt` extension. ;; Removing these saves 35 MiB in the resulting package. - (delete-file (string-append bin "/coqtop.opt")) - (delete-file (string-append bin "/coqidetop.opt"))) + ;; Unfortunately, completely deleting them breaks coqide. + (delete-file coqtop.opt) + (delete-file coqidetop.opt) + (symlink coqtop coqtop.opt) + (symlink coqidetop coqidetop.opt)) #t)) (add-after 'install 'install-ide (lambda* (#:key outputs #:allow-other-keys) @@ -117,7 +129,7 @@ ;; Fails because the output is not formatted as expected. (delete-file-recursively "coq-makefile/timing") ;; Fails because we didn't build coqtop.byte. - (delete-file-recursively "coq-makefile/findlib-package") + (delete-file "misc/printers.sh") (invoke "make"))))))) (home-page "https://coq.inria.fr") (synopsis "Proof assistant for higher-order logic") @@ -207,7 +219,7 @@ provers.") (define-public coq-flocq (package (name "coq-flocq") - (version "3.2.0") + (version "3.3.1") (source (origin (method git-fetch) @@ -217,7 +229,7 @@ provers.") (file-name (git-file-name name version)) (sha256 (base32 - "15bi36x7zj0glsb3s2gwqd4wswhfzh36rbp7imbyff53a7nna95l")))) + "01gdykva0lcw6y3dm8j0djxayb87szfg9vn0mxd6z3pks644misl")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) @@ -264,7 +276,7 @@ inside Coq.") (define-public coq-gappa (package (name "coq-gappa") - (version "1.4.2") + (version "1.4.4") (source (origin (method git-fetch) @@ -274,7 +286,7 @@ inside Coq.") (file-name (git-file-name name version)) (sha256 (base32 - "0r7jwp5xssdfzivs2flp7mzrscqhgl63mryhhf1cvndpgzqwfk2f")))) + "0f3g3wjkvfkm961l4jpckhsqd43jnvm7f5qqk78qc32zh1fg339n")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) @@ -324,7 +336,7 @@ assistant.") (define-public coq-mathcomp (package (name "coq-mathcomp") - (version "1.10.0") + (version "1.11.0") (source (origin (method git-fetch) @@ -333,7 +345,7 @@ assistant.") (commit (string-append "mathcomp-" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "1h5h1c2025r1ms5qryvwy6pikxmpmmjav6yl127xpzmqdi6w732d")))) + (base32 "1axywpa1jcpnidd86irpd1gdbbg2sfbwc652675xisq5wnmfmf6f")))) (build-system gnu-build-system) (native-inputs `(("ocaml" ,ocaml) @@ -366,7 +378,7 @@ part of the distribution.") (define-public coq-coquelicot (package (name "coq-coquelicot") - (version "3.0.3") + (version "3.1.0") (source (origin (method git-fetch) @@ -376,7 +388,7 @@ part of the distribution.") (file-name (git-file-name name version)) (sha256 (base32 - "0m5wbr2s8lnf8b7cfwv15hyzsmbcaz6hgdn7aazcrkxnwr87vgkp")))) + "0mz3pxan1237fr5fi79c66y7b9z7bmi0sc45kwrmkczsjm5462jm")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) @@ -419,7 +431,7 @@ theorems between the two libraries.") (define-public coq-bignums (package (name "coq-bignums") - (version "8.10.0") + (version "8.11.0") (source (origin (method git-fetch) (uri (git-reference @@ -428,7 +440,7 @@ theorems between the two libraries.") (file-name (git-file-name name version)) (sha256 (base32 - "0bpb4flckn4nqxbs3wjiznyx1k7r8k93qdigp3qwmikp2lxvcbw5")))) + "1xcd7c7qlvs0narfba6px34zq0mz8rffnhxw0kzhhg6i4iw115dp")))) (build-system gnu-build-system) (native-inputs `(("ocaml" ,ocaml) @@ -452,7 +464,7 @@ provides BigN, BigZ, BigQ that used to be part of Coq standard library.") (define-public coq-interval (package (name "coq-interval") - (version "3.4.1") + (version "4.0.0") (source (origin (method git-fetch) @@ -462,7 +474,7 @@ provides BigN, BigZ, BigQ that used to be part of Coq standard library.") (file-name (git-file-name name version)) (sha256 (base32 - "03q3dfqi3r3f7aji5s06ig4aav9ajcwswwdzi5lrgr69z0m487k4")))) + "01iz6qmnsm6b9s1vmdjs79vjx9xgwzn5rwyjp6bvs8hg3zlmhpip")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) @@ -548,16 +560,16 @@ uses Ltac to synthesize the substitution operation.") (define-public coq-equations (package (name "coq-equations") - (version "1.2.1") + (version "1.2.3") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/mattam82/Coq-Equations") - (commit (string-append "v" version "-8.10")))) + (commit (string-append "v" version "-8.11")))) (file-name (git-file-name name version)) (sha256 (base32 - "023q5dww3drw35dm9bi9p9d0wrj9k7vax7hfdsprf8l340pb4s0k")))) + "1srxz1rws8jsh7402g2x2vcqgjbbsr64dxxj5d2zs48pmhb20csf")))) (build-system gnu-build-system) (native-inputs `(("ocaml" ,ocaml) @@ -588,7 +600,7 @@ kernel.") (define-public coq-stdpp (package (name "coq-stdpp") - (version "1.2.1") + (version "1.4.0") (synopsis "Alternative Coq standard library std++") (source (origin (method git-fetch) @@ -598,7 +610,7 @@ kernel.") (file-name (git-file-name name version)) (sha256 (base32 - "1lczybg1jq9drbi8nzrlb0k199x4n07aawjwfzrl3qqc0w8kmvdz")))) + "1m6c7ibwc99jd4cv14v3r327spnfvdf3x2mnq51f9rz99rffk68r")))) (build-system gnu-build-system) (inputs `(("coq" ,coq))) diff --git a/gnu/packages/cpp.scm b/gnu/packages/cpp.scm index 78f0f28716..003883e1a5 100644 --- a/gnu/packages/cpp.scm +++ b/gnu/packages/cpp.scm @@ -13,6 +13,7 @@ ;;; Copyright © 2020 Vinicius Monego <monego@posteo.net> ;;; Copyright © 2020 Marius Bakke <marius@gnu.org> ;;; Copyright © 2020 Michael Rohleder <mike@rohleder.de> +;;; Copyright © 2020 Alexandros Theodotou <alex@zrythm.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -360,7 +361,7 @@ intuitive syntax and trivial integration.") (define-public xtl (package (name "xtl") - (version "0.6.16") + (version "0.6.18") (source (origin (method git-fetch) (uri @@ -369,7 +370,7 @@ intuitive syntax and trivial integration.") (commit version))) (sha256 (base32 - "0hkz01l7fc1m79s02hz86cl9nb4rwdvg255r6aj82gnsx5qvxy2l")) + "0s9gnv1wq0cmpw878dmx0lnci86895hhdrwyc9x8lfbc1hr7ypnh")) (file-name (git-file-name name version)))) (native-inputs `(("googletest" ,googletest) @@ -493,6 +494,36 @@ it's own version of the tool, this is a fork that aims to be more responsive and make @code{cpplint} usable in wider contexts.") (license license:bsd-3))) +(define-public reproc + (package + (name "reproc") + (version "14.1.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/DaanDeMeyer/reproc") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1n71wb50qv2dmhjgw7azx5gigbrp19l2n3d41g9p05l5l0y1qg0q")))) + (build-system cmake-build-system) + (arguments + ;; No tests. + `(#:tests? #f + ;; Enable building of shared library. + #:configure-flags `("-DBUILD_SHARED_LIBS=1"))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (synopsis "Process IO library") + (description "reproc (Redirected Process) is a C/C++ library that +simplifies starting, stopping and communicating with external programs. The +main use case is executing command line applications directly from C or C++ +code and retrieving their output.") + (home-page "https://github.com/DaanDeMeyer/reproc") + (license license:expat))) + (define-public sobjectizer (package (name "sobjectizer") diff --git a/gnu/packages/cran.scm b/gnu/packages/cran.scm index f32d45d2a4..a39c0e64cb 100644 --- a/gnu/packages/cran.scm +++ b/gnu/packages/cran.scm @@ -1,6 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2015, 2016, 2017, 2018, 2019, 2020 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2015 Andreas Enge <andreas@enge.fr> +;;; Copyright © 2015, 2016 Pjotr Prins <pjotr.guix@thebird.nl> ;;; Copyright © 2016, 2017 Ben Woodcroft <donttrustben@gmail.com> ;;; Copyright © 2016, 2017, 2018, 2020 Roel Janssen <roel@gnu.org> ;;; Copyright © 2017, 2018, 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> @@ -18,12 +19,16 @@ ;;; Copyright © 2019 Nicolò Balzarotti <anothersms@gmail.com> ;;; Copyright © 2019 Wiktor Żelazny <wzelazny@vurv.cz> ;;; Copyright © 2019 Arne Babenhauserheide <arne_bab@web.de> +;;; Copyright © 2019, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2020 Todor Kondić <tk.code@protonmail.com> ;;; Copyright © 2020 Danjela Lura <danielaluraa@gmail.com> ;;; Copyright © 2020 Naga Malleswari <nagamalli@riseup.net> ;;; Copyright © 2020 Eric Brown <ecbrown@ericcbrown.com> ;;; Copyright © 2020 Peter Lo <peterloleungyau@gmail.com> ;;; Copyright © 2020 Rafael Luque Leiva <rafael.luque@osoco.es> +;;; Copyright © 2020 Lars-Dominik Braun <ldb@leibniz-psychology.org> +;;; Copyright © 2020 Vinicius Monego <monego@posteo.net> +;;; Copyright © 2020 Antoine Côté <antoine.cote@posteo.net> ;;; ;;; This file is part of GNU Guix. ;;; @@ -47,6 +52,7 @@ #:use-module (guix git-download) #:use-module (guix utils) #:use-module (guix build-system r) + #:use-module (gnu packages) #:use-module (gnu packages algebra) #:use-module (gnu packages autotools) #:use-module (gnu packages base) @@ -69,6 +75,7 @@ #:use-module (gnu packages imagemagick) #:use-module (gnu packages java) #:use-module (gnu packages javascript) + #:use-module (gnu packages libevent) #:use-module (gnu packages lisp-xyz) #:use-module (gnu packages machine-learning) #:use-module (gnu packages maths) @@ -86,19 +93,20 @@ #:use-module (gnu packages tcl) #:use-module (gnu packages tls) #:use-module (gnu packages web) + #:use-module (gnu packages xml) #:use-module (gnu packages xorg)) (define-public r-rticles (package (name "r-rticles") - (version "0.14") + (version "0.15") (source (origin (method url-fetch) (uri (cran-uri "rticles" version)) (sha256 (base32 - "1377fib4asazhhki4aajvld0wa35vd3zjvyl3lf2hjm2qk3vyak7")))) + "0svh2bcqnlqdxdpw5afz1b980i2q13k8cxpq6flfqbi3dlwf3h8l")))) (properties `((upstream-name . "rticles"))) (build-system r-build-system) (propagated-inputs @@ -245,17 +253,18 @@ series of numeric vectors/matrices and factors.") (define-public r-ggpmisc (package (name "r-ggpmisc") - (version "0.3.5") + (version "0.3.6") (source (origin (method url-fetch) (uri (cran-uri "ggpmisc" version)) (sha256 (base32 - "0ma2d3a3v8n85sghxr9anl6vgbs8gi82i1dllw99n81gsm59wgin")))) + "05i81q9rg8zf35vgcxhn3yhkc9dlvcpwpxncq1q3zs0rxhfkf208")))) (build-system r-build-system) (propagated-inputs `(("r-broom" ,r-broom) ("r-dplyr" ,r-dplyr) + ("r-glue" ,r-glue) ("r-ggplot2" ,r-ggplot2) ("r-gridextra" ,r-gridextra) ("r-lubridate" ,r-lubridate) @@ -305,14 +314,14 @@ organisms via the @code{g:Profiler} toolkit.") (define-public r-gprofiler2 (package (name "r-gprofiler2") - (version "0.1.9") + (version "0.2.0") (source (origin (method url-fetch) (uri (cran-uri "gprofiler2" version)) (sha256 (base32 - "112hmmvdwg8xz90w1bsbzc55y4xi9jj4dqy0q4bsgp49x58r92rb")))) + "0q8hl3gdxy34c0181ql405fdklz82nfvmwdcafd5mzf935rjpyjg")))) (properties `((upstream-name . "gprofiler2"))) (build-system r-build-system) (propagated-inputs @@ -517,6 +526,35 @@ functions are simplified but can be faster or have other advantages.") objects.") (license license:gpl3))) +(define-public r-mboost + (package + (name "r-mboost") + (version "2.9-3") + (source (origin + (method url-fetch) + (uri (cran-uri "mboost" version)) + (sha256 + (base32 + "1qp5c43kc0939sss5w3hhn794lbi69wgfsa31sq4c8vzh35pjqmf")))) + (build-system r-build-system) + (propagated-inputs + `(("r-lattice" ,r-lattice) + ("r-matrix" ,r-matrix) + ("r-nnls" ,r-nnls) + ("r-partykit" ,r-partykit) + ("r-quadprog" ,r-quadprog) + ("r-stabs" ,r-stabs) + ("r-survival" ,r-survival))) + (home-page "https://github.com/boost-R/mboost") + (synopsis "Model-based boosting") + (description + "This package provides a functional gradient descent algorithm (boosting) +for optimizing general risk functions utilizing component-wise (penalised) +least squares estimates or regression trees as base-learners for fitting +generalized linear, additive and interaction models to potentially +high-dimensional data.") + (license license:gpl2))) + (define-public r-sys (package (name "r-sys") @@ -746,14 +784,14 @@ same time tries to group instances from the same class together.") (define-public r-callr (package (name "r-callr") - (version "3.4.3") + (version "3.4.4") (source (origin (method url-fetch) (uri (cran-uri "callr" version)) (sha256 (base32 - "1dc20gdawy9mhnc452qlshv2p4krs6c2gymvpv365mn141zjgdq1")))) + "1hgc4mfwv83104fh93v8g2srpwzjayq7krgzi9r0apq784r61642")))) (build-system r-build-system) (propagated-inputs `(("r-r6" ,r-r6) @@ -830,8 +868,35 @@ into a pipeline of data manipulation and visualisation.") (uri (cran-uri "httpuv" version)) (sha256 (base32 - "066rprqvz9qln6xd85x1yh1wbbmzd157xjl8zq1zbgr8l6347inm")))) + "066rprqvz9qln6xd85x1yh1wbbmzd157xjl8zq1zbgr8l6347inm")) + ;; Unvendor bundled libraries. As of 1.5.4 the vendored libuv + ;; only contains fixes for building on Solaris. + (patches (search-patches "r-httpuv-1.5.4-unvendor-libuv.patch")) + (modules '((guix build utils) + (ice-9 ftw) + (srfi srfi-1))) + (snippet + `(begin + (delete-file-recursively "src/libuv") + ;; Cannot unbundle http-parser, because it contains local + ;; modifications. + #t)))) (build-system r-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'unbundle-libuv + (lambda* (#:key outputs #:allow-other-keys) + (substitute* (find-files "src" "\\.cpp$|\\.h$") + (("\"libuv/include/uv\\.h\"") + "<uv.h>")) + ;; Fix https://github.com/rstudio/httpuv/issues/282 + (substitute* "src/http.cpp" + (("uv_pipe_init\\(pLoop, &pSocket->handle\\.pipe, true\\);") + "uv_pipe_init(pLoop, &pSocket->handle.pipe, 0);")) + #t))))) + (inputs + `(("libuv" ,libuv))) (propagated-inputs `(("r-bh" ,r-bh) ("r-later" ,r-later) @@ -853,13 +918,13 @@ particularly easy to create complete web applications using httpuv alone.") (define-public r-jsonlite (package (name "r-jsonlite") - (version "1.7.0") + (version "1.7.1") (source (origin (method url-fetch) (uri (cran-uri "jsonlite" version)) (sha256 (base32 - "1izfrk5yahsz6s69wanfspn72qdffjglbr5305akj72ig9fnladq")))) + "1wygpnycmyf339x92hwapqk7nc1gs9cadx890b809a9spjhah41a")))) (build-system r-build-system) (native-inputs `(("r-knitr" ,r-knitr))) @@ -1860,14 +1925,14 @@ colors are provided.") (define-public r-glue (package (name "r-glue") - (version "1.4.1") + (version "1.4.2") (source (origin (method url-fetch) (uri (cran-uri "glue" version)) (sha256 (base32 - "1j1va4vi3g9sl0cyjdwxvh5lvh10x8k9qvnsr9zyxddcbk9qgdpq")))) + "1bgpirdvjrf0da734clrixawvpdap4lpda4g89vais96589m8wwz")))) (build-system r-build-system) ;; knitr depends on glue, so we can't add knitr here to build the ;; vignettes. @@ -1903,6 +1968,32 @@ of space-time series. The @code{pastecs} library is a PNEC-Art4 and IFREMER initiative to bring PASSTEC 2000 functionalities to R.") (license license:gpl2+))) +(define-public r-partykit + (package + (name "r-partykit") + (version "1.2-9") + (source (origin + (method url-fetch) + (uri (cran-uri "partykit" version)) + (sha256 + (base32 + "18nc6vvj1cy8ly2hqixg544sbg8vbpzwsr1cdlzrqfykd0pzgkvf")))) + (build-system r-build-system) + (propagated-inputs + `(("r-formula" ,r-formula) + ("r-inum" ,r-inum) + ("r-libcoin" ,r-libcoin) + ("r-mvtnorm" ,r-mvtnorm) + ("r-rpart" ,r-rpart) + ("r-survival" ,r-survival))) + (home-page "http://partykit.R-Forge.R-project.org/partykit") + (synopsis "Toolkit for recursive partytioning") + (description + "This package provides a toolkit with infrastructure for representing, +summarizing, and visualizing tree-structured regression and classification +models.") + (license license:gpl2+))) + (define-public r-plogr (package (name "r-plogr") @@ -2098,6 +2189,31 @@ where the bound function accepts additional arguments.") bindings that call a C++ function.") (license license:expat))) +(define-public r-bisquerna + (package + (name "r-bisquerna") + (version "1.0.4") + (source (origin + (method url-fetch) + (uri (cran-uri "BisqueRNA" version)) + (sha256 + (base32 + "01g34n87ml7n3pck77497ddgbv3rr5p4153ac8ninpgjijlm3jw2")))) + (properties `((upstream-name . "BisqueRNA"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-limsolve" ,r-limsolve))) + (home-page "https://www.biorxiv.org/content/10.1101/669911v1") + (synopsis "Decomposition of bulk expression with single-cell sequencing") + (description "This package provides tools to accurately estimate cell type +abundances from heterogeneous bulk expression. A reference-based method +utilizes single-cell information to generate a signature matrix and +transformation of bulk expression for accurate regression based estimates. +A marker-based method utilizes known cell-specific marker genes to measure +relative abundances across samples.") + (license license:gpl3))) + (define-public r-auc (package (name "r-auc") @@ -2145,14 +2261,14 @@ on (non-orthogonal) variable vectors in scatterplots and biplots.") (define-public r-shape (package (name "r-shape") - (version "1.4.4") + (version "1.4.5") (source (origin (method url-fetch) (uri (cran-uri "shape" version)) (sha256 (base32 - "0hadk3mapkhbh8xjkiz52vxdagmmgvm15xwpzb90ikw4giyipjzl")))) + "17qqhjyfhxv9la07ykaslb50c8g4d0cgfypx4y91h9i2yjw7jjh9")))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/shape") (synopsis "Functions for plotting graphical shapes") @@ -2264,19 +2380,21 @@ rows, dropping names) to see if the modified versions are identical.") (define-public r-dendextend (package (name "r-dendextend") - (version "1.13.4") + (version "1.14.0") (source (origin (method url-fetch) (uri (cran-uri "dendextend" version)) (sha256 (base32 - "1pjbz6sb4pgh3d5pm53vmf3q8y6lq3hrgjd6547xxs3m63sb8mn4")))) + "0n3qg76apgbqbvxv2yp5qwpy6nx03xmmc9mdfyq4dqblqhdld29p")))) (build-system r-build-system) (propagated-inputs `(("r-ggplot2" ,r-ggplot2) ("r-magrittr" ,r-magrittr) ("r-viridis" ,r-viridis))) + (native-inputs + `(("r-knitr" ,r-knitr))) (home-page "https://cran.r-project.org/web/packages/dendextend") (synopsis "Extending 'dendrogram' functionality in R") (description @@ -2364,14 +2482,14 @@ in main memory.") (define-public r-ffbase (package (name "r-ffbase") - (version "0.12.8") + (version "0.13.1") (source (origin (method url-fetch) (uri (cran-uri "ffbase" version)) (sha256 (base32 - "0mjk7dkq1ginqqfvngzny747ggf9a8fd7kblq96n5ys1jrwjyqhq")))) + "0knl0vnh8w4q3ry24gp4fd55ipnaj9hb1rwm31fs119kgmh3gd8x")))) (build-system r-build-system) (propagated-inputs `(("r-bit" ,r-bit) @@ -2530,6 +2648,25 @@ selection, as well as methods for retrieving coordinates, for subsetting, print, summary, etc.") (license license:gpl2+))) +(define-public r-laplacesdemon + (package + (name "r-laplacesdemon") + (version "16.1.4") + (source + (origin + (method url-fetch) + (uri (cran-uri "LaplacesDemon" version)) + (sha256 + (base32 "1nv1kx86cg8f2s8q15pzskc0lg94bb250p0fhybrx5sjqv1s2lj1")))) + (properties `((upstream-name . "LaplacesDemon"))) + (build-system r-build-system) + (home-page "https://github.com/LaplacesDemonR/LaplacesDemon") + (synopsis "Complete environment for Bayesian inference") + (description + "This package provides a complete environment for Bayesian inference using +a variety of different samplers.") + (license license:expat))) + (define-public r-rmtstat (package (name "r-rmtstat") @@ -2652,14 +2789,14 @@ or excesses over a high threshold.") (define-public r-lmtest (package (name "r-lmtest") - (version "0.9-37") + (version "0.9-38") (source (origin (method url-fetch) (uri (cran-uri "lmtest" version)) (sha256 (base32 - "02nasm0j2vwkhz11dxqixs23msy1s3yj0jps6949fmgh9gwjkjfx")))) + "0sr19bmw2cpagfvwg772m79wvl1i2hww1xfr69bzr3rr8pm2r8ij")))) (build-system r-build-system) (propagated-inputs `(("r-zoo" ,r-zoo))) @@ -2697,13 +2834,13 @@ by Li, Brown, Huang, and Bickel") (define-public r-inline (package (name "r-inline") - (version "0.3.15") + (version "0.3.16") (source (origin (method url-fetch) (uri (cran-uri "inline" version)) (sha256 (base32 - "0s4wssvpan189fijahknxq5s22ww9bzmdlmyhnra748r7khky17z")))) + "0x9m2hwin6anfhkf61cnsbqn4qp1pr2gy1pbwbdgbdz2cmns85nj")))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/inline") (synopsis "Functions to inline C, C++, Fortran function calls from R") @@ -3011,14 +3148,14 @@ contexts.") (define-public r-squarem (package (name "r-squarem") - (version "2020.3") + (version "2020.4") (source (origin (method url-fetch) (uri (cran-uri "SQUAREM" version)) (sha256 (base32 - "17l05i87vwvcsk79fbg52zrx04zdlwiiyl3ga8qafs7mqx0j976q")))) + "1r2yxfiqbpwy5ccg94r7f6sz7lh5aq0xjpf632s42wgmml1dvlzb")))) (properties `((upstream-name . "SQUAREM"))) (build-system r-build-system) (home-page "https://coah.jhu.edu/people/Faculty_personal_Pages/Varadhan.html") @@ -3388,14 +3525,14 @@ problems as well as resampling based estimators of prediction error.") (define-public r-psych (package (name "r-psych") - (version "2.0.7") + (version "2.0.8") (source (origin (method url-fetch) (uri (cran-uri "psych" version)) (sha256 (base32 - "13z26yk9nrgviyakkij3jc7mja8wy7al9ripab07mvy21kli79bc")))) + "0ymds7ql2dv994m73h68dnhbsws8bl09p2rqvl6xsq6c6xr0yryg")))) (build-system r-build-system) (propagated-inputs `(("r-lattice" ,r-lattice) @@ -3637,6 +3774,36 @@ algorithm. The interface of @code{ucminf} is designed for easy interchange with the package @code{optim}.") (license license:gpl2+))) +(define-public r-useful + (package + (name "r-useful") + (version "1.2.6") + (source (origin + (method url-fetch) + (uri (cran-uri "useful" version)) + (sha256 + (base32 + "0n50v1q75k518sq23id14jphwla35q4sasahrnrnllwrachl67v1")))) + (properties `((upstream-name . "useful"))) + (build-system r-build-system) + (propagated-inputs + `(("r-assertthat" ,r-assertthat) + ("r-dplyr" ,r-dplyr) + ("r-ggplot2" ,r-ggplot2) + ("r-magrittr" ,r-magrittr) + ("r-matrix" ,r-matrix) + ("r-plyr" ,r-plyr) + ("r-purrr" ,r-purrr) + ("r-scales" ,r-scales))) + (home-page "https://github.com/jaredlander/useful") + (synopsis "Collection of handy, useful functions") + (description "This package provides a set of little functions that have been +found useful to do little odds and ends such as plotting the results of K-means +clustering, substituting special text characters, viewing parts of a +@code{data.frame}, constructing formulas from text and building design and +response matrices.") + (license license:bsd-3))) + (define-public r-ordinal (package (name "r-ordinal") @@ -3945,14 +4112,14 @@ training models for classification or ranking.") (define-public r-xts (package (name "r-xts") - (version "0.12-0") + (version "0.12.1") (source (origin (method url-fetch) (uri (cran-uri "xts" version)) (sha256 (base32 - "0q4cc8ynp7ndmgll1jj3lxyl6wmgg89ad3wq09kjc2ngszdfc4fz")))) + "0b6a7mpyk9aw6axas7nz01gadczprwwfhii01fz31z26z555i06n")))) (build-system r-build-system) (propagated-inputs `(("r-zoo" ,r-zoo))) (home-page "https://github.com/joshuaulrich/xts") @@ -4242,13 +4409,13 @@ constants, and control debugging of packages via environment variables.") (define-public r-processx (package (name "r-processx") - (version "3.4.3") + (version "3.4.4") (source (origin (method url-fetch) (uri (cran-uri "processx" version)) (sha256 - (base32 "07dhzijqnj2zkm3qrk4ppsv8wscn8ysdsjbidlg9zrbj1wcg4izj")))) + (base32 "0as8lzfpbz5rcpcpczvrrgd67whngkmw12q33r2yn3k7lq80z95a")))) (build-system r-build-system) (propagated-inputs `(("r-ps" ,r-ps) @@ -4389,13 +4556,13 @@ iVAT).") (define-public r-xfun (package (name "r-xfun") - (version "0.16") + (version "0.17") (source (origin (method url-fetch) (uri (cran-uri "xfun" version)) (sha256 - (base32 "1x7b71xhbl44fyccz69l24nbgyxawm2km90s4h1l3zr5z2vly0sg")))) + (base32 "1zd5qi1rrz3b1lpisapa2yscanz39ghaamf28g7aq3z9ai2a2ymj")))) (build-system r-build-system) ;; knitr itself depends on xfun #; @@ -4452,14 +4619,14 @@ to variables on the left-hand side of the assignment.") (define-public r-vctrs (package (name "r-vctrs") - (version "0.3.2") + (version "0.3.4") (source (origin (method url-fetch) (uri (cran-uri "vctrs" version)) (sha256 (base32 - "05s8v3ms4jaim44c7m4y0dnv8mysj9b26cdfyrfgcjpllayrjib2")))) + "0xvqgc36zhd9y1xsm7kwrbr5sxwnd3jbr9qrb1gma2lqkqf42izb")))) (build-system r-build-system) (propagated-inputs `(("r-digest" ,r-digest) @@ -4583,6 +4750,30 @@ automatically.") supports arbitrary vertex/edge/graph attributes.") (license license:gpl2+))) +(define-public r-stabs + (package + (name "r-stabs") + (version "0.6-3") + (source + (origin + (method url-fetch) + (uri (cran-uri "stabs" version)) + (sha256 + (base32 + "17sa0sjxf6h7gx1ga1pxhv17yrz3qisaivbf5cbc3asvshhswqg9")))) + (build-system r-build-system) + (home-page "https://github.com/hofnerb/stabs") + (synopsis "Stability selection with error control") + (description + "This package provides resampling procedures to assess the stability of +selected variables with additional finite sample error control for +high-dimensional variable selection procedures such as Lasso or boosting. +Both, standard stability selection (Meinshausen & Buhlmann, 2010) and +complementary pairs stability selection with improved error bounds +(Shah & Samworth, 2013) are implemented. The package can be combined with +arbitrary user specified variable selection approaches.") + (license license:gpl2))) + (define-public r-statnet-common (package (name "r-statnet-common") @@ -4685,14 +4876,14 @@ of these tests are also included.") (define-public r-ttr (package (name "r-ttr") - (version "0.24.0") + (version "0.24.2") (source (origin (method url-fetch) (uri (cran-uri "TTR" version)) (sha256 (base32 - "0dcmfr98bxhdhszsdr1yjhvy4kplnfm88fh8sdzrkjank1qsxia2")))) + "06vicgbhwpsww09hhha5mbcd0cwip6cvkfbhjjhp950rv64bk1r5")))) (properties `((upstream-name . "TTR"))) (build-system r-build-system) (propagated-inputs @@ -4887,20 +5078,21 @@ University Press, 2000.") (define-public r-tsa (package (name "r-tsa") - (version "1.2") + (version "1.3") (source (origin (method url-fetch) (uri (cran-uri "TSA" version)) (sha256 (base32 - "0gjfqibwdznz0nka95k4fjm935svxjpnqfywwz403crn2lh30h6q")))) + "1bv5q609lhmrcxnjnvcj497fbjlv89zwa8q918hw4iki5nkvwwdb")))) (properties `((upstream-name . "TSA"))) (build-system r-build-system) (propagated-inputs `(("r-leaps" ,r-leaps) ("r-locfit" ,r-locfit) - ("r-mgcv" ,r-mgcv))) + ("r-mgcv" ,r-mgcv) + ("r-tseries" ,r-tseries))) (home-page "https://homepage.divms.uiowa.edu/~kchan/TSA.htm") (synopsis "Time series analysis") (description @@ -4912,14 +5104,14 @@ Cryer and Kung-Sik Chan.") (define-public r-extradistr (package (name "r-extradistr") - (version "1.8.11") + (version "1.9.1") (source (origin (method url-fetch) (uri (cran-uri "extraDistr" version)) (sha256 (base32 - "1vvqv1d4hxa025gmm8cbiph63qsqy87l3ri5idd524gyz3chbcl3")))) + "1gypnbvdzczl0mvznvy8r7hzsvc5gvdvi2mmzj21cqdw9n63944r")))) (properties `((upstream-name . "extraDistr"))) (build-system r-build-system) (propagated-inputs @@ -5009,14 +5201,14 @@ interface.") (define-public r-trend (package (name "r-trend") - (version "1.1.2") + (version "1.1.3") (source (origin (method url-fetch) (uri (cran-uri "trend" version)) (sha256 (base32 - "09b6ycyfgs4xlhx6kn6qm5rl2acp58hzhv8qclzn3kb1wjjyvxy5")))) + "0bj40acr1sc7vfxdcsdja3g28xsmrclmgb3n94p89gfjcgp8nv1d")))) (build-system r-build-system) (propagated-inputs `(("r-extradistr" ,r-extradistr))) @@ -5182,14 +5374,14 @@ functions to enforce symmetric scales or add tags to facetted plots.") (define-public r-heatmaply (package (name "r-heatmaply") - (version "1.1.0") + (version "1.1.1") (source (origin (method url-fetch) (uri (cran-uri "heatmaply" version)) (sha256 (base32 - "133q8ir45vhfxs2lnd96k97g21ihg2arfhp349kmk339pk32fcxz")))) + "02fv66h61y55bn5wrnlvhj7v6xwqs3pddyp3jgk554s1zv4qs2fr")))) (build-system r-build-system) (propagated-inputs `(("r-assertthat" ,r-assertthat) @@ -5841,14 +6033,14 @@ misclassification probabilities of different models.") (define-public r-zip (package (name "r-zip") - (version "2.1.0") + (version "2.1.1") (source (origin (method url-fetch) (uri (cran-uri "zip" version)) (sha256 (base32 - "1dfsagb7bx35x4zx6f5xk2sk057fbyhskkpw3w72b805cjw920da")))) + "0b3wmbx5v0i1scylgk4nli2ljg4p12wx7a1sqljklv9969wl3p8i")))) (build-system r-build-system) (home-page "https://github.com/gaborcsardi/zip") (synopsis "Cross-platform Zip compression") @@ -5923,14 +6115,14 @@ simple method for converting between file types.") (define-public r-maptools (package (name "r-maptools") - (version "1.0-1") + (version "1.0-2") (source (origin (method url-fetch) (uri (cran-uri "maptools" version)) (sha256 (base32 - "0fs1y3cbymcq4f76wd27h5a7ihdmxii3ca8x29x32xgxhmasni4l")))) + "0jgf3wg47jdnznxb3ncv4is9ackwviy4lzcyggqwzw3wh6jnvb6s")))) (build-system r-build-system) (propagated-inputs `(("r-foreign" ,r-foreign) @@ -6072,14 +6264,14 @@ Python's @url{https://github.com/ActiveState/appdirs,Appdirs} to R.") (define-public r-renv (package (name "r-renv") - (version "0.11.0") + (version "0.12.0") (source (origin (method url-fetch) (uri (cran-uri "renv" version)) (sha256 (base32 - "0dd63jr240pg95a6p058s5kcclfmscihdy89v212msihmwvylwh3")))) + "1jwm1ik600xswb53i1swjsnfrjjdffmmyk5k9hjc7kc8nlfl0ay5")))) (properties `((upstream-name . "renv"))) (build-system r-build-system) (native-inputs @@ -6667,14 +6859,14 @@ references and Rd files.") (define-public r-officer (package (name "r-officer") - (version "0.3.12") + (version "0.3.14") (source (origin (method url-fetch) (uri (cran-uri "officer" version)) (sha256 (base32 - "1wk9h6bz77s5j6lgksmlrmi1vyaa35c766gq6hgb1dp0dz0x342x")))) + "1nyv4710bcd2afh1l1qiy5zrspjcdvc7mrzz5189dwy9xvgxi31h")))) (build-system r-build-system) (propagated-inputs `(("r-magrittr" ,r-magrittr) @@ -6934,14 +7126,14 @@ other add-on packages.") (define-public r-insight (package (name "r-insight") - (version "0.9.0") + (version "0.9.5") (source (origin (method url-fetch) (uri (cran-uri "insight" version)) (sha256 (base32 - "1ajc8c5mi3ma5411lmlqp2ihkk5n0h8a1c0r3j07wk33p31c1qvl")))) + "0853kq4j8kic8z2gh5mxfqkwxjs4bdphlajzyvxka7af4r04bfmi")))) (build-system r-build-system) (native-inputs `(("r-knitr" ,r-knitr))) @@ -7068,14 +7260,14 @@ functions.") (define-public r-flextable (package (name "r-flextable") - (version "0.5.10") + (version "0.5.11") (source (origin (method url-fetch) (uri (cran-uri "flextable" version)) (sha256 (base32 - "1j7yvjiavar21ywck6nyz0p6bd66fnj99bq8lljdz4rrl3314yb8")))) + "1yb872izzr9yja7q2vfqm0imcbcgs0fvi4b19arhdlwwa42figj4")))) (build-system r-build-system) (propagated-inputs `(("r-base64enc" ,r-base64enc) @@ -7101,14 +7293,14 @@ documents.") (define-public r-writexl (package (name "r-writexl") - (version "1.3") + (version "1.3.1") (source (origin (method url-fetch) (uri (cran-uri "writexl" version)) (sha256 (base32 - "0lah0r2pd996s0vdbi614j3h52dbxmifha6f19v53p2b7fr32wjd")))) + "1njdhvh8605wd2j8glrbxfyc36p2n88prpq080jn44s9lgfmbgsb")))) (build-system r-build-system) (inputs `(("zlib" ,zlib))) (home-page "https://github.com/ropensci/writexl") @@ -7290,14 +7482,14 @@ Group (Non-)Overlap considerations.") (define-public r-deriv (package (name "r-deriv") - (version "4.0") + (version "4.0.1") (source (origin (method url-fetch) (uri (cran-uri "Deriv" version)) (sha256 (base32 - "03mlfy8jzzzbh2l18gnmw0a71n9savx4cw72yhkxq93v2xj8fy3n")))) + "16rq65x1xhxvqwn4p427divay3b9fgam2lxccxb8529adnrxmw6p")))) (properties `((upstream-name . "Deriv"))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/Deriv") @@ -7723,18 +7915,17 @@ and coverage methods to tune the choice of threshold.") (define-public r-mosaiccore (package (name "r-mosaiccore") - (version "0.6.0") + (version "0.8.0") (source (origin (method url-fetch) (uri (cran-uri "mosaicCore" version)) (sha256 - (base32 "1klw97h6lchw1cpcl8s637ikcl428cckmjq0czi7mibh9q9mw72z")))) + (base32 "00va6x1i8d3wkm1bgsms9dsjfn5a1l43prpl9pqirgq3zm85hrqj")))) (properties `((upstream-name . "mosaicCore"))) (build-system r-build-system) (propagated-inputs `(("r-dplyr" ,r-dplyr) - ("r-lazyeval" ,r-lazyeval) ("r-mass" ,r-mass) ("r-rlang" ,r-rlang) ("r-tidyr" ,r-tidyr))) @@ -7776,13 +7967,13 @@ while providing the intuitive capabilities of @code{r-ggplot2}.") (define-public r-mosaicdata (package (name "r-mosaicdata") - (version "0.18.0") + (version "0.20.1") (source (origin (method url-fetch) (uri (cran-uri "mosaicData" version)) (sha256 - (base32 "0cx5dg26ha7nzkdyghkbbd6ikncj60qv1538az77lfgn2jylvkbz")))) + (base32 "05mrwvs7awhpv2gvk0jjva74gndfgh2cl17slxcjhwlpga8nmxji")))) (properties `((upstream-name . "mosaicData"))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/mosaicData/") @@ -9061,14 +9252,14 @@ ROPE percentage and pd).") (define-public r-performance (package (name "r-performance") - (version "0.4.8") + (version "0.5.0") (source (origin (method url-fetch) (uri (cran-uri "performance" version)) (sha256 (base32 - "1gl3m1pw0wrj9m9cgd0vzbj9swfwjg4aa40gpliplb9y7dcmgi4l")))) + "01csmn52d6rhlmcj7gi6ckc6v6a8pymnrpx9l729h13igxsnaf28")))) (build-system r-build-system) (propagated-inputs `(("r-bayestestr" ,r-bayestestr) @@ -9088,14 +9279,14 @@ effects models and Bayesian models.") (define-public r-ggeffects (package (name "r-ggeffects") - (version "0.15.1") + (version "0.16.0") (source (origin (method url-fetch) (uri (cran-uri "ggeffects" version)) (sha256 (base32 - "12z58casz0yl1w7nfs64bz4miz0mmc300ap3rz4d2cc4z0rg0r47")))) + "0v8n8jmp6x1iagbyc5jgf1d29yz5hd3ibnyl9n9f73vqq5bzj0p5")))) (build-system r-build-system) (propagated-inputs `(("r-insight" ,r-insight) @@ -9780,14 +9971,14 @@ This package provides an R interface.") (define-public r-rcpphnsw (package (name "r-rcpphnsw") - (version "0.2.0") + (version "0.3.0") (source (origin (method url-fetch) (uri (cran-uri "RcppHNSW" version)) (sha256 (base32 - "0gqdkw7vkcm544rz45g0hplg836ygzbfwk9gh9wr0817icvdb3qv")))) + "01z0plf1i6dyibw4ica8shmijyk1grpqb886hcga72z2cpm4xsx0")))) (properties `((upstream-name . "RcppHNSW"))) (build-system r-build-system) (propagated-inputs `(("r-rcpp" ,r-rcpp))) @@ -9934,14 +10125,14 @@ to colexicographical order.") (define-public r-misc3d (package (name "r-misc3d") - (version "0.8-4") + (version "0.9-0") (source (origin (method url-fetch) (uri (cran-uri "misc3d" version)) (sha256 (base32 - "0qjzpw3h09qi2gfz52b7nhzd95p7yyxsd03fldc9wzzn6wi3vpkm")))) + "10jf5r1x588vi54bzaqgi9mgcqlkiga2c3jvmqmk3lavc8fjksd1")))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/misc3d/") (synopsis "Miscellaneous 3D Plots") @@ -10777,14 +10968,14 @@ Touzet and Varre (2007).") (define-public r-rnifti (package (name "r-rnifti") - (version "1.1.0") + (version "1.2.2") (source (origin (method url-fetch) (uri (cran-uri "RNifti" version)) (sha256 (base32 - "1z8ninp3aq18w0slcfn8r2fp48cdz8l0k0namsrnvgyp8lzcpqpn")))) + "0h837jdspy071ckij8szqd8149bm113jpqwbclg87is4brsm5jzg")))) (properties `((upstream-name . "RNifti"))) (build-system r-build-system) (propagated-inputs `(("r-rcpp" ,r-rcpp))) @@ -11744,13 +11935,13 @@ Differences with other sparse matrix packages are: (define-public r-fields (package (name "r-fields") - (version "10.3") + (version "11.4") (source (origin (method url-fetch) (uri (cran-uri "fields" version)) (sha256 - (base32 "12k97vfjlz5h8vynirnvik1nyj1iw25n8xl7awmx9mpd6wvgy2s9")))) + (base32 "0x8hbl0rn7gnhn7w45wd757g9in27884qr6vy30xrk150qaq941y")))) (build-system r-build-system) (propagated-inputs `(("r-maps" ,r-maps) @@ -12009,14 +12200,14 @@ JASA, 94:496-509.") (define-public r-etm (package (name "r-etm") - (version "1.1") + (version "1.1.1") (source (origin (method url-fetch) (uri (cran-uri "etm" version)) (sha256 (base32 - "02yvh473l5qajaymhsxwb235a9r7q3nsig9a9mrfca68xih8yvgd")))) + "1hvrplmdpjjpjji663rw0vjbbrzj2nvr04d1nkc8bf46p4ixyxgy")))) (build-system r-build-system) (propagated-inputs `(("r-data-table" ,r-data-table) @@ -12664,20 +12855,22 @@ transformation, respectively.") (define-public r-shinyjs (package (name "r-shinyjs") - (version "1.1") + (version "2.0.0") (source (origin (method url-fetch) (uri (cran-uri "shinyjs" version)) (sha256 (base32 - "14k8y313ppj23m9rhlk8jc94x6sbn3qrsnx6xrijiyv8m8dii1l9")))) + "1zzq356dvd8ciajy6r5n4ybgx9xk7ydwv25j86xlcsqznkxdkkf2")))) (build-system r-build-system) (propagated-inputs `(("r-digest" ,r-digest) ("r-htmltools" ,r-htmltools) ("r-jsonlite" ,r-jsonlite) ("r-shiny" ,r-shiny))) + (native-inputs + `(("r-knitr" ,r-knitr))) (home-page "https://deanattali.com/shinyjs") (synopsis "Improve the user experience of your Shiny apps") (description @@ -13698,14 +13891,14 @@ sampling.") (define-public r-deldir (package (name "r-deldir") - (version "0.1-28") + (version "0.1-29") (source (origin (method url-fetch) (uri (cran-uri "deldir" version)) (sha256 (base32 - "12ys8jdcrgzhf9m2yirlqfars397qb0q0pbypahmfa66lgr6wdx5")))) + "1vwh8c8zxspyls05q9kgzz5p85i8k8aax5ir45np2bmg0pjvh6kv")))) (build-system r-build-system) (native-inputs `(("gfortran" ,gfortran))) (home-page "https://cran.r-project.org/web/packages/deldir") @@ -13722,14 +13915,14 @@ tessellation.") (define-public r-sf (package (name "r-sf") - (version "0.9-5") + (version "0.9-6") (source (origin (method url-fetch) (uri (cran-uri "sf" version)) (sha256 (base32 - "0c58asqrvz1pkdkb0lkzwz8cwb43pmxd39z0jp217hk7p7q3ngwf")))) + "01yqlnx9v7lzb6g4ywjlncz67cnkizszarnf2dmd4fi8abhw4zs9")))) (build-system r-build-system) (inputs `(("gdal" ,gdal) @@ -14046,14 +14239,14 @@ include (define-public r-haplo-stats (package (name "r-haplo-stats") - (version "1.8.2") + (version "1.8.5") (source (origin (method url-fetch) (uri (cran-uri "haplo.stats" version)) (sha256 (base32 - "13gc980jk1pas7mz9b4nmwqd64qhh2c0xhq1z06z67jgv7k8n7dc")))) + "1f5cyyyavkf4l6kksp87s8d92vjrnhxmpz6j737pa527pn3gghf9")))) (properties `((upstream-name . "haplo.stats"))) (build-system r-build-system) (propagated-inputs @@ -15481,14 +15674,14 @@ regular expressions from human readable expressions") (define-public r-xmlparsedata (package (name "r-xmlparsedata") - (version "1.0.3") + (version "1.0.4") (source (origin (method url-fetch) (uri (cran-uri "xmlparsedata" version)) (sha256 (base32 - "0gjr3l5z5dp276lchr2649as1rkj56d2mlvbr66yg393zzw50lsh")))) + "177vfyjrqfi3wam8scpsradap1lv35yc25xq745dr7gabg116yrq")))) (properties `((upstream-name . "xmlparsedata"))) (build-system r-build-system) (home-page "https://github.com/r-lib/xmlparsedata#readme") @@ -15802,14 +15995,14 @@ engine (Salmon et al., 2011) as provided by the package @code{sitmo}.") (define-public r-ingredients (package (name "r-ingredients") - (version "1.3.1") + (version "2.0") (source (origin (method url-fetch) (uri (cran-uri "ingredients" version)) (sha256 (base32 - "0l0dqrm9am6wk8jcf8cdhc6xnrna9cqr5wz6lsnczq2gf6ybhjg1")))) + "084ywbq0dwnf075bazz40n23wh7r1fwl6zs7xqkcg07kfzqkzb2w")))) (properties `((upstream-name . "ingredients"))) (build-system r-build-system) (propagated-inputs @@ -15907,14 +16100,14 @@ been used in the call to @code{aov}.") (define-public r-dalex (package (name "r-dalex") - (version "1.3.1.1") + (version "2.0") (source (origin (method url-fetch) (uri (cran-uri "DALEX" version)) (sha256 (base32 - "0akw1yzhb3shpg6yb89vralqd2z80z5yk9azqaa55dx56as52kjs")))) + "1yn61cbqvyycn617pzhd7kgd34xsnmqvj3s10inn2ywycybk7byi")))) (properties `((upstream-name . "DALEX"))) (build-system r-build-system) (propagated-inputs @@ -16078,14 +16271,14 @@ the current document.") (define-public r-xgboost (package (name "r-xgboost") - (version "1.1.1.1") + (version "1.2.0.1") (source (origin (method url-fetch) (uri (cran-uri "xgboost" version)) (sha256 (base32 - "13njhcxljhbcs37ni6r5174fk8kx9b5p7rlw1an1ak3w92jn56cq")))) + "16hpvv2hwdzcyg90z7c1g5d2hj011qk8mivy4l2nqd2g7rkjwis4")))) (build-system r-build-system) (propagated-inputs `(("r-data-table" ,r-data-table) @@ -16168,14 +16361,14 @@ LargeVis method of Tang et al. (2016) is also provided.") (define-public r-kableextra (package (name "r-kableextra") - (version "1.1.0") + (version "1.2.1") (source (origin (method url-fetch) (uri (cran-uri "kableExtra" version)) (sha256 (base32 - "1nicvw06xsf3a1f5c10mih07b76m2v5s5h165vmz0qx6n1a3492i")))) + "0n25y7zwpspvkd62rd6x8c22dg2ys27smlpdz5brqs5ddv7x9dis")))) (properties `((upstream-name . "kableExtra"))) (build-system r-build-system) (propagated-inputs @@ -16184,7 +16377,6 @@ LargeVis method of Tang et al. (2016) is also provided.") ("r-htmltools" ,r-htmltools) ("r-knitr" ,r-knitr) ("r-magrittr" ,r-magrittr) - ("r-readr" ,r-readr) ("r-rmarkdown" ,r-rmarkdown) ("r-rstudioapi" ,r-rstudioapi) ("r-rvest" ,r-rvest) @@ -16193,6 +16385,8 @@ LargeVis method of Tang et al. (2016) is also provided.") ("r-viridislite" ,r-viridislite) ("r-webshot" ,r-webshot) ("r-xml2" ,r-xml2))) + (native-inputs + `(("r-knitr" ,r-knitr))) (home-page "https://haozhu233.github.io/kableExtra/") (synopsis "Construct complex tables with pipe syntax") (description @@ -16498,16 +16692,18 @@ both R code and compiled C/C++/FORTRAN code.") (define-public r-systemfonts (package (name "r-systemfonts") - (version "0.2.3") + (version "0.3.1") (source (origin (method url-fetch) (uri (cran-uri "systemfonts" version)) (sha256 (base32 - "0wf62mfam5zlrck0wrdbyi4hi7pn5j0739rihgp8sj2cjypm2lnb")))) + "0ldxgcayyisp2gcbv4xw9zpb48bp4czi8016kq5nqdqhv1qb3sz0")))) (properties `((upstream-name . "systemfonts"))) (build-system r-build-system) + (propagated-inputs + `(("r-cpp11" ,r-cpp11))) (inputs `(("fontconfig" ,fontconfig) ("zlib" ,zlib))) @@ -16644,14 +16840,14 @@ in pipelines.") (define-public r-parameters (package (name "r-parameters") - (version "0.8.2") + (version "0.8.5") (source (origin (method url-fetch) (uri (cran-uri "parameters" version)) (sha256 (base32 - "0kamszscywvdh4gikl5mmma7s5p7spmhirq3wrgf7x7f4gppbbmh")))) + "1vax5p1znq2ddbks2i614hbrnn2x6x71942xx49p813qk8dh284l")))) (properties `((upstream-name . "parameters"))) (build-system r-build-system) (propagated-inputs @@ -17962,14 +18158,14 @@ models.") (define-public r-gamlss (package (name "r-gamlss") - (version "5.1-7") + (version "5.2-0") (source (origin (method url-fetch) (uri (cran-uri "gamlss" version)) (sha256 (base32 - "0ywqwsp4k6jgnicp1gdsglji61l5cnackl52700v8kmkk83bq4c8")))) + "1q82md0439si0n7vqbbbdk45sjr0ad7i8mgrn3kwnr4h213pb4nk")))) (properties `((upstream-name . "gamlss"))) (build-system r-build-system) (propagated-inputs @@ -20111,14 +20307,14 @@ Raftery, Appl.Statistics, 1989); it includes inference and basic methods.") (define-public r-forecast (package (name "r-forecast") - (version "8.12") + (version "8.13") (source (origin (method url-fetch) (uri (cran-uri "forecast" version)) (sha256 (base32 - "1ycj5z4wd5a16nlcjy07dqm8jkih240xa02cn4wvysnnhkapyq7b")))) + "0vrql5d4v28890np2m6ws1nr1fcl6frs1bz74vfkihkixcmkl3j9")))) (properties `((upstream-name . "forecast"))) (build-system r-build-system) (propagated-inputs @@ -20673,19 +20869,20 @@ Complete access to optimized C functions is made available with (define-public r-openmx (package (name "r-openmx") - (version "2.17.4") + (version "2.18.1") (source (origin (method url-fetch) (uri (cran-uri "OpenMx" version)) (sha256 (base32 - "07y4w7xdb63p5kkrj6sdx1kabbsgbbj7nw9hc690jy84r15aryal")))) + "0gyjps0l3ig90piccgd04s63cz65kk5i5l9iyakps4bv27h1lzwm")))) (properties `((upstream-name . "OpenMx"))) (build-system r-build-system) (propagated-inputs `(("r-bh" ,r-bh) ("r-digest" ,r-digest) + ("r-lifecycle" ,r-lifecycle) ("r-mass" ,r-mass) ("r-matrix" ,r-matrix) ("r-rcpp" ,r-rcpp) @@ -20785,14 +20982,14 @@ output in R.") (define-public r-bdgraph (package (name "r-bdgraph") - (version "2.62") + (version "2.63") (source (origin (method url-fetch) (uri (cran-uri "BDgraph" version)) (sha256 (base32 - "1b1vfar940swvn3pcil848qsp8ji50fjjll8jjzp6y2adx0f8pby")))) + "05q6dbvdnxmh7myvw60zqcqx16f80i8d6qa4y7xnfkx02l9lwiyc")))) (properties `((upstream-name . "BDgraph"))) (build-system r-build-system) (propagated-inputs @@ -22284,14 +22481,14 @@ multi-state models.") (define-public r-scatterpie (package (name "r-scatterpie") - (version "0.1.4") + (version "0.1.5") (source (origin (method url-fetch) (uri (cran-uri "scatterpie" version)) (sha256 (base32 - "0g5sn0iv6c1q7y51j4gbbbnil5089dgk1w4q94c7h5y3x7wfrzqb")))) + "0h48l0699lpfagv09f53yismir84945m56qwzk52lc7wxyvkfcp1")))) (properties `((upstream-name . "scatterpie"))) (build-system r-build-system) (propagated-inputs @@ -22471,6 +22668,39 @@ and clustering large sequence datasets using fast alignment-free k-mer counting and recursive k-means partitioning.") (license license:gpl3))) +(define-public r-hardhat + (package + (name "r-hardhat") + (version "0.1.4") + (source + (origin + (method url-fetch) + (uri (cran-uri "hardhat" version)) + (sha256 + (base32 + "0gaj4hr4dj27jaasp7v0hzaivipplvq746ajsyz4yd1in03hfjvs")))) + (properties `((upstream-name . "hardhat"))) + (build-system r-build-system) + (propagated-inputs + `(("r-glue" ,r-glue) + ("r-rlang" ,r-rlang) + ("r-tibble" ,r-tibble) + ("r-vctrs" ,r-vctrs))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://github.com/tidymodels/hardhat") + (synopsis "Construct modeling packages") + (description + "Building modeling packages is hard. A large amount of effort generally +goes into providing an implementation for a new method that is efficient, +fast, and correct, but often less emphasis is put on the user interface. A +good interface requires specialized knowledge about S3 methods and formulas, +which the average package developer might not have. The goal of +@code{hardhat} is to reduce the burden around building new modeling packages +by providing functionality for preprocessing, predicting, and validating +input.") + (license license:expat))) + (define-public r-shapforxgboost (package (name "r-shapforxgboost") @@ -22655,14 +22885,14 @@ you can automate browsers locally or remotely.") (define-public r-conquer (package (name "r-conquer") - (version "1.0.1") + (version "1.0.2") (source (origin (method url-fetch) (uri (cran-uri "conquer" version)) (sha256 (base32 - "1c7id7wgspma5bdcirrhw7f9fp709zxpj31klivasdbvd4jgi4vb")))) + "1zvlsrbmrij011mcdi3qngs1al2lhrdiyknxnk0w1zhzrra62bsl")))) (properties `((upstream-name . "conquer"))) (build-system r-build-system) (propagated-inputs @@ -22988,14 +23218,14 @@ aggregation for comparing different implementations in order to provide a (define-public r-rfast (package (name "r-rfast") - (version "1.9.9") + (version "2.0.1") (source (origin (method url-fetch) (uri (cran-uri "Rfast" version)) (sha256 (base32 - "18m8xhg24kygwhq7avdp1hibilicb5wppi2wdmc36fkqljc274y0")))) + "1cq3mcg49hsvqhwn6f4dgsx7f8ma4qnwr5n6s7m22qy57rg31958")))) (properties `((upstream-name . "Rfast"))) (build-system r-build-system) (propagated-inputs @@ -23117,3 +23347,1240 @@ designed as a drop-in replacement for the RANN function @code{nn2}. In addition, objects which include the k-d tree search structure can be returned to speed up repeated queries of the same set of target points.") (license license:bsd-3))) + +(define-public r-muhaz + (package + (name "r-muhaz") + (version "1.2.6.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "muhaz" version)) + (sha256 + (base32 + "08qh43zx6h3yby44q2vxphfvmfdmqxpgyp0734yn341sy9n8pkkk")))) + (properties `((upstream-name . "muhaz"))) + (build-system r-build-system) + (propagated-inputs + `(("r-survival" ,r-survival))) + (native-inputs + `(("gfortran" ,gfortran))) + (home-page "https://cran.r-project.org/web/packages/muhaz/") + (synopsis "Hazard function estimation in survival analysis") + (description + "This package produces a smooth estimate of the hazard function for +censored data.") + ;; Any version of the GPL. + (license license:gpl3+))) + +(define-public r-flexsurv + (package + (name "r-flexsurv") + (version "1.1.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "flexsurv" version)) + (sha256 + (base32 + "0x7p1rv51pplfyyzcg63ssb8z56mig7y0363hkr0219w3cvyq9nr")))) + (properties `((upstream-name . "flexsurv"))) + (build-system r-build-system) + (propagated-inputs + `(("r-desolve" ,r-desolve) + ("r-mstate" ,r-mstate) + ("r-muhaz" ,r-muhaz) + ("r-mvtnorm" ,r-mvtnorm) + ("r-quadprog" ,r-quadprog) + ("r-rcpp" ,r-rcpp) + ("r-survival" ,r-survival) + ("r-tibble" ,r-tibble) + ("r-tidyr" ,r-tidyr))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://github.com/chjackson/flexsurv-dev") + (synopsis "Flexible parametric survival and multi-state models") + (description + "This package provides flexible parametric models for time-to-event data, +including the Royston-Parmar spline model, generalized gamma and generalized F +distributions. Any user-defined parametric distribution can be fitted, given +at least an R function defining the probability density or hazard. There are +also tools for fitting and predicting from fully parametric multi-state +models.") + (license license:gpl2+))) + +(define-public r-transphylo + (package + (name "r-transphylo") + (version "1.4.4") + (source + (origin + (method url-fetch) + (uri (cran-uri "TransPhylo" version)) + (sha256 + (base32 + "1506c97y8dnhd0c38rgvmg70q0l3xmmn07mjglhnw7hi5n5y9mv9")))) + (properties `((upstream-name . "TransPhylo"))) + (build-system r-build-system) + (propagated-inputs + `(("r-ape" ,r-ape) + ("r-rcpp" ,r-rcpp))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://cran.r-project.org/web/packages/TransPhylo/") + (synopsis "Inference of transmission tree from a dated phylogeny") + (description + "This is a package to infer transmission trees from a dated phylogeny. +It includes methods to simulate and analyze outbreaks. The methodology is +described in @url{https://doi.org/10.1093/molbev/msu121,Didelot et al. (2014)} +and @url{https://doi.org/10.1093/molbev/msw275,Didelot et al. (2017)}.") + (license license:gpl2+))) + +(define-public r-km-ci + (package + (name "r-km-ci") + (version "0.5-2") + (source + (origin + (method url-fetch) + (uri (cran-uri "km.ci" version)) + (sha256 + (base32 + "1l6kw8jppaa1802yc5pbfwwgac56nhwc9p076ivylhms4w7cdf8v")))) + (properties `((upstream-name . "km.ci"))) + (build-system r-build-system) + (propagated-inputs + `(("r-survival" ,r-survival))) + (home-page "https://cran.r-project.org/web/packages/km.ci/") + (synopsis "Confidence intervals for the Kaplan-Meier estimator") + (description + "This package computes various @dfn{confidence intervals} (CI) for the +Kaplan-Meier estimator, namely: Petos CI, Rothman CI, CIs based on Greenwoods +variance, Thomas and Grunkemeier CI and the simultaneous confidence bands by +Nair and Hall and Wellner.") + (license license:gpl2+))) + +(define-public r-kmsurv + (package + (name "r-kmsurv") + (version "0.1-5") + (source + (origin + (method url-fetch) + (uri (cran-uri "KMsurv" version)) + (sha256 + (base32 + "0hi5vvk584rl70gbrr75w9hc775xmbxnaig0dd6hlpi4071pnqjm")))) + (properties `((upstream-name . "KMsurv"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/KMsurv/") + (synopsis "Data sets from Klein and Moeschberger (1997), Survival Analysis") + (description + "This package provides data sets and functions for Klein and Moeschberger +(1997), \"Survival Analysis, Techniques for Censored and Truncated Data\", +Springer.") + (license license:gpl3+))) + +(define-public r-survmisc + (package + (name "r-survmisc") + (version "0.5.5") + (source + (origin + (method url-fetch) + (uri (cran-uri "survMisc" version)) + (sha256 + (base32 + "00nvvl8gz4477ab24rd0xvfksm8msv8h021b9ld5c9cizc41n2bm")))) + (properties `((upstream-name . "survMisc"))) + (build-system r-build-system) + (propagated-inputs + `(("r-data-table" ,r-data-table) + ("r-ggplot2" ,r-ggplot2) + ("r-gridextra" ,r-gridextra) + ("r-km-ci" ,r-km-ci) + ("r-kmsurv" ,r-kmsurv) + ("r-knitr" ,r-knitr) + ("r-survival" ,r-survival) + ("r-xtable" ,r-xtable) + ("r-zoo" ,r-zoo))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://cran.r-project.org/web/packages/survMisc/") + (synopsis "Miscellaneous functions for survival data") + (description + "This package provides a collection of functions to help in the analysis +of right-censored survival data. These extend the methods available in +the @code{survival} package.") + (license license:gpl2))) + +(define-public r-exactranktests + (package + (name "r-exactranktests") + (version "0.8-31") + (source + (origin + (method url-fetch) + (uri (cran-uri "exactRankTests" version)) + (sha256 + (base32 + "1154dkcid3njhamdp87qs9bnx7l8bdqkcjsds9q9f2xmizs9x8gw")))) + (properties + `((upstream-name . "exactRankTests"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/exactRankTests/") + (synopsis "Exact distributions for rank and permutation tests") + (description + "This package computes exact conditional p-values and quantiles using an +implementation of the Shift-Algorithm by Streitberg & Roehmel.") + (license license:gpl2+))) + +(define-public r-maxstat + (package + (name "r-maxstat") + (version "0.7-25") + (source + (origin + (method url-fetch) + (uri (cran-uri "maxstat" version)) + (sha256 + (base32 + "114z1rwxwvk05ijjhdppzm148n1h192fp0w12ky10zkrhf6kphbg")))) + (properties `((upstream-name . "maxstat"))) + (build-system r-build-system) + (propagated-inputs + `(("r-exactranktests" ,r-exactranktests) + ("r-mvtnorm" ,r-mvtnorm))) + (home-page "https://cran.r-project.org/web/packages/maxstat/") + (synopsis "Maximally selected rank statistics") + (description + "This package provides maximally selected rank statistics with several +p-value approximations.") + (license license:gpl2+))) + +(define-public r-survminer + (package + (name "r-survminer") + (version "0.4.8") + (source + (origin + (method url-fetch) + (uri (cran-uri "survminer" version)) + (sha256 + (base32 + "1niysd89mxb2a6ncvzm1s6xgfvq3psba65af0whh2p56r2hwrwff")))) + (properties `((upstream-name . "survminer"))) + (build-system r-build-system) + (propagated-inputs + `(("r-broom" ,r-broom) + ("r-dplyr" ,r-dplyr) + ("r-ggplot2" ,r-ggplot2) + ("r-ggpubr" ,r-ggpubr) + ("r-gridextra" ,r-gridextra) + ("r-magrittr" ,r-magrittr) + ("r-maxstat" ,r-maxstat) + ("r-purrr" ,r-purrr) + ("r-rlang" ,r-rlang) + ("r-scales" ,r-scales) + ("r-survival" ,r-survival) + ("r-survmisc" ,r-survmisc) + ("r-tibble" ,r-tibble) + ("r-tidyr" ,r-tidyr))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://rpkgs.datanovia.com/survminer/index.html") + (synopsis "Drawing survival curves using ggplot2") + (description + "This package contains the function @code{ggsurvplot()} for easily +drawing beautiful and 'ready-to-publish' survival curves with the 'number at +risk' table and 'censoring count plot'. Other functions are also available to +plot adjusted curves for Cox model and to visually examine Cox model +assumptions.") + (license license:gpl2))) + +(define-public r-forge + (package + (name "r-forge") + (version "0.2.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "forge" version)) + (sha256 + (base32 + "0pjfzsc35agkh0zfw2czwajkbsyn6liys5irl5bhz5r1vim3jmwa")))) + (properties `((upstream-name . "forge"))) + (build-system r-build-system) + (propagated-inputs + `(("r-magrittr" ,r-magrittr) + ("r-rlang" ,r-rlang))) + (home-page "https://cran.r-project.org/web/packages/forge/") + (synopsis "Cast values into shape") + (description + "This package provides helper functions with a consistent interface to +coerce and verify the types and shapes of values for input checking.") + (license license:asl2.0))) + +(define-public r-config + (package + (name "r-config") + (version "0.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "config" version)) + (sha256 + (base32 + "0l67nfpm42ssnk0bl4jmq6bibz8hawgfgh2s14s5c8mnimv6mpjs")))) + (properties `((upstream-name . "config"))) + (build-system r-build-system) + (propagated-inputs + `(("r-yaml" ,r-yaml))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://github.com/rstudio/config") + (synopsis "Manage environment specific configuration values") + (description + "This package lets you manage configuration values across multiple +environments (e.g. development, test, production). It reads values using a +function that determines the current environment and returns the appropriate +value.") + (license license:gpl3))) + +(define-public r-adaptivesparsity + (package + (name "r-adaptivesparsity") + (version "1.6") + (source (origin + (method url-fetch) + (uri (cran-uri "AdaptiveSparsity" version)) + (sha256 + (base32 + "0imr5m8mll9j6n4icsv6z9rl5kbnwsp9wvzrg7n90nnmcxq2cz91")))) + (properties + `((upstream-name . "AdaptiveSparsity"))) + (build-system r-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'link-against-armadillo + (lambda _ + (substitute* "src/Makevars" + (("PKG_LIBS=" prefix) + (string-append prefix "-larmadillo"))) + #t))))) + (propagated-inputs + `(("r-mass" ,r-mass) + ("r-matrix" ,r-matrix) + ("r-rcpp" ,r-rcpp) + ("r-rcpparmadillo" ,r-rcpparmadillo))) + (inputs + `(("armadillo" ,armadillo))) + (home-page "https://cran.r-project.org/web/packages/AdaptiveSparsity") + (synopsis "Adaptive sparsity models") + (description + "This package implements the Figueiredo machine learning algorithm for +adaptive sparsity and the Wong algorithm for adaptively sparse Gaussian +geometric models.") + (license license:lgpl3+))) + +(define-public r-diffusionmap + (package + (name "r-diffusionmap") + (version "1.2.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "diffusionMap" version)) + (sha256 + (base32 + "1rvk7069brlm1s9kqj4c31mwwr3mw4hmhay95cjjjfmw5xclff2j")))) + (properties `((upstream-name . "diffusionMap"))) + (build-system r-build-system) + (propagated-inputs + `(("r-igraph" ,r-igraph) + ("r-matrix" ,r-matrix) + ("r-scatterplot3d" ,r-scatterplot3d))) + (home-page "https://www.r-project.org") + (synopsis "Diffusion map") + (description "This package implements the diffusion map method of data +parametrization, including creation and visualization of diffusion maps, +clustering with diffusion K-means and regression using the adaptive regression +model.") + (license license:gpl2))) + +(define-public r-igraph + (package + (name "r-igraph") + (version "1.2.5") + (source + (origin + (method url-fetch) + (uri (cran-uri "igraph" version)) + (sha256 + (base32 + "126z1ygbmi3g7hk97snf22rnx680dyi30idssm5zacba5rdngp8c")))) + (build-system r-build-system) + (native-inputs + `(("gfortran" ,gfortran))) + (inputs + `(("gmp" ,gmp) + ("glpk" ,glpk) + ("libxml2" ,libxml2) + ("zlib" ,zlib))) + (propagated-inputs + `(("r-magrittr" ,r-magrittr) + ("r-matrix" ,r-matrix) + ("r-pkgconfig" ,r-pkgconfig))) + (home-page "https://igraph.org") + (synopsis "Network analysis and visualization") + (description + "This package provides routines for simple graphs and network analysis. +It can handle large graphs very well and provides functions for generating +random and regular graphs, graph visualization, centrality methods and much +more.") + (license license:gpl2+))) + +(define-public r-workflows + (package + (name "r-workflows") + (version "0.1.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "workflows" version)) + (sha256 + (base32 + "1d5njd1xdl8kghlbar4acgl9hxq83p6k7yks592cvakmcz7f853m")))) + (properties `((upstream-name . "workflows"))) + (build-system r-build-system) + (propagated-inputs + `(("r-cli" ,r-cli) + ("r-ellipsis" ,r-ellipsis) + ("r-generics" ,r-generics) + ("r-glue" ,r-glue) + ("r-hardhat" ,r-hardhat) + ("r-parsnip" ,r-parsnip) + ("r-rlang" ,r-rlang))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://github.com/tidymodels/workflows") + (synopsis "Modeling workflows") + (description + "A workflow is an object that can bundle together your pre-processing, +modeling, and post-processing requests. For example, if you have a +@code{recipe} and @code{parsnip} model, these can be combined into a +workflow. The advantages are: + +@enumerate +@item You don’t have to keep track of separate objects in your workspace. +@item The recipe prepping and model fitting can be executed using a single + call to @code{fit()}. +@item If you have custom tuning parameter settings, these can be defined using + a simpler interface when combined with @code{tune}. +@item In the future, workflows will be able to add post-processing operations, + such as modifying the probability cutoff for two-class models. +@end enumerate +") + (license license:expat))) + +(define-public r-gpfit + (package + (name "r-gpfit") + (version "1.0-8") + (source + (origin + (method url-fetch) + (uri (cran-uri "GPfit" version)) + (sha256 + (base32 + "05mpiyi2vxv0wqp422n1mnxa8msc4daq40cwpnpngbcwqhlgqkby")))) + (properties `((upstream-name . "GPfit"))) + (build-system r-build-system) + (propagated-inputs + `(("r-lattice" ,r-lattice) + ("r-lhs" ,r-lhs))) + (home-page "https://cran.r-project.org/web/packages/GPfit/") + (synopsis "Gaussian Processes modeling") + (description + "This package provides a computationally stable approach of fitting a +@dfn{Gaussian Process} (GP) model to a deterministic simulator.") + (license license:gpl2))) + +(define-public r-yardstick + (package + (name "r-yardstick") + (version "0.0.7") + (source + (origin + (method url-fetch) + (uri (cran-uri "yardstick" version)) + (sha256 + (base32 + "1yrvlhn4gxyn9f20z5yv3xam0j0a8z362jwa32r33r0g0jk5z2fq")))) + (properties `((upstream-name . "yardstick"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-generics" ,r-generics) + ("r-proc" ,r-proc) + ("r-rlang" ,r-rlang) + ("r-tidyselect" ,r-tidyselect))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://github.com/tidymodels/yardstick") + (synopsis "Tidy characterizations of model performance") + (description + "This package provides tidy tools for quantifying how well a model fits +to a data set such as confusion matrices, class probability curve summaries, +and regression metrics (e.g., RMSE).") + (license license:gpl2))) + +(define-public r-rsample + (package + (name "r-rsample") + (version "0.0.7") + (source + (origin + (method url-fetch) + (uri (cran-uri "rsample" version)) + (sha256 + (base32 + "0s6hgq0rcv3ianyidq3n9z34y5ww51gaggqkwmwns9yyxmwfjcm8")))) + (properties `((upstream-name . "rsample"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-furrr" ,r-furrr) + ("r-generics" ,r-generics) + ("r-purrr" ,r-purrr) + ("r-rlang" ,r-rlang) + ("r-tibble" ,r-tibble) + ("r-tidyr" ,r-tidyr) + ("r-tidyselect" ,r-tidyselect) + ("r-vctrs" ,r-vctrs))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://rsample.tidymodels.org") + (synopsis "General resampling infrastructure") + (description + "This package provides classes and functions to create and summarize +different types of resampling objects (e.g. bootstrap, cross-validation).") + (license license:gpl2))) + +(define-public r-dicedesign + (package + (name "r-dicedesign") + (version "1.8-1") + (source + (origin + (method url-fetch) + (uri (cran-uri "DiceDesign" version)) + (sha256 + (base32 + "11s1m543kxd6gv4amh8z6pph1n67sj9sfwm6hjy83wfs65syf5vp")))) + (properties `((upstream-name . "DiceDesign"))) + (build-system r-build-system) + (home-page "http://dice.emse.fr/") + (synopsis "Designs of computer experiments") + (description + "This package provides tools to create some specific @code{Space-Filling +Design} (SFD) and to test their quality.") + (license license:gpl3))) + +(define-public r-dials + (package + (name "r-dials") + (version "0.0.8") + (source + (origin + (method url-fetch) + (uri (cran-uri "dials" version)) + (sha256 + (base32 + "0jxmlcy20y57chflx91fqz6c4pbdckzr7jirq4s72vp723avrr4p")))) + (properties `((upstream-name . "dials"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dicedesign" ,r-dicedesign) + ("r-dplyr" ,r-dplyr) + ("r-glue" ,r-glue) + ("r-purrr" ,r-purrr) + ("r-rlang" ,r-rlang) + ("r-scales" ,r-scales) + ("r-tibble" ,r-tibble) + ("r-vctrs" ,r-vctrs) + ("r-withr" ,r-withr))) + (native-inputs `(("r-knitr" ,r-knitr))) + (home-page "https://dials.tidymodels.org/") + (synopsis "Tools for creating tuning parameter values") + (description + "Many models contain tuning parameters (i.e. parameters that cannot be +directly estimated from the data). These tools can be used to define objects +for creating, simulating, or validating values for such parameters.") + (license license:gpl2))) + +(define-public r-tune + (package + (name "r-tune") + (version "0.1.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "tune" version)) + (sha256 + (base32 + "0293xkmv1nyvm72wxznnlm3qpf6475xzl2sf52mnrjxxr7i447p1")))) + (properties `((upstream-name . "tune"))) + (build-system r-build-system) + (propagated-inputs + `(("r-cli" ,r-cli) + ("r-crayon" ,r-crayon) + ("r-dials" ,r-dials) + ("r-dplyr" ,r-dplyr) + ("r-foreach" ,r-foreach) + ("r-ggplot2" ,r-ggplot2) + ("r-glue" ,r-glue) + ("r-gpfit" ,r-gpfit) + ("r-hardhat" ,r-hardhat) + ("r-lifecycle" ,r-lifecycle) + ("r-parsnip" ,r-parsnip) + ("r-purrr" ,r-purrr) + ("r-recipes" ,r-recipes) + ("r-rlang" ,r-rlang) + ("r-rsample" ,r-rsample) + ("r-tibble" ,r-tibble) + ("r-tidyr" ,r-tidyr) + ("r-vctrs" ,r-vctrs) + ("r-workflows" ,r-workflows) + ("r-yardstick" ,r-yardstick))) + (home-page "https://github.com/tidymodels/tune") + (synopsis "Tidy tuning tools") + (description + "The ability to tune models is important. @code{tune} contains functions +and classes to be used in conjunction with other @code{tidymodels} packages +for finding reasonable values of hyper-parameters in models, pre-processing +methods, and post-processing steps.") + (license license:expat))) + +(define-public r-tidyposterior + (package + (name "r-tidyposterior") + (version "0.0.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "tidyposterior" version)) + (sha256 + (base32 + "0wsv800w056ziqbnwal7ncmdy4li8cn5yrdx07w35b7j8kl4mwhg")))) + (properties `((upstream-name . "tidyposterior"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-generics" ,r-generics) + ("r-ggplot2" ,r-ggplot2) + ("r-lifecycle" ,r-lifecycle) + ("r-purrr" ,r-purrr) + ("r-rlang" ,r-rlang) + ("r-rsample" ,r-rsample) + ("r-rstanarm" ,r-rstanarm) + ("r-tibble" ,r-tibble) + ("r-tidyr" ,r-tidyr) + ("r-vctrs" ,r-vctrs))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://tidyposterior.tidymodels.org") + (synopsis "Bayesian analysis to compare models using resampling statistics") + (description + "This package can be used to conduct post hoc analyses of resampling +results generated by models. For example, if two models are evaluated with +the @dfn{root mean squared error} (RMSE) using 10-fold cross-validation, there +are 10 paired statistics. These can be used to make comparisons between +models without involving a test set.") + (license license:gpl2))) + +(define-public r-tidypredict + (package + (name "r-tidypredict") + (version "0.4.6") + (source + (origin + (method url-fetch) + (uri (cran-uri "tidypredict" version)) + (sha256 + (base32 + "1fx1nr8fry3nwy2391g26zkqakdf8f3j7zyrihbc0qhscvbdskiy")))) + (properties `((upstream-name . "tidypredict"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-generics" ,r-generics) + ("r-knitr" ,r-knitr) + ("r-purrr" ,r-purrr) + ("r-rlang" ,r-rlang) + ("r-tibble" ,r-tibble))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://tidypredict.tidymodels.org") + (synopsis "Run predictions inside the database") + (description + "This package parses a fitted R model object, and returns a formula in +Tidy Eval code that calculates the predictions. It works with several +database backends because it leverages @code{dplyr} and @code{dbplyr} for the +final SQL translation of the algorithm. It currently supports @code{lm()}, +@code{glm()}, @code{randomForest()}, @code{ranger()}, @code{earth()}, +@code{xgb.Booster.complete()}, @code{cubist()}, and @code{ctree()} models.") + (license license:gpl3))) + +(define-public r-janeaustenr + (package + (name "r-janeaustenr") + (version "0.1.5") + (source + (origin + (method url-fetch) + (uri (cran-uri "janeaustenr" version)) + (sha256 + (base32 + "1wyn4qc28a3sval8shmyi2d7s4nl3jh96s8pzq871brxcmrncbwr")))) + (properties `((upstream-name . "janeaustenr"))) + (build-system r-build-system) + (home-page "https://github.com/juliasilge/janeaustenr") + (synopsis "Jane Austen's complete novels") + (description + "This package provides the full texts for Jane Austen's six completed +novels, ready for text analysis. These novels are \"Sense and Sensibility\", +\"Pride and Prejudice\", \"Mansfield Park\", \"Emma\", \"Northanger Abbey\", +and \"Persuasion\".") + (license license:expat))) + +(define-public r-tokenizers + (package + (name "r-tokenizers") + (version "0.2.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "tokenizers" version)) + (sha256 + (base32 + "006xf1vdrmp9skhpss9ldhmk4cwqk512cjp1pxm2gxfybpf7qq98")))) + (properties `((upstream-name . "tokenizers"))) + (build-system r-build-system) + (propagated-inputs + `(("r-rcpp" ,r-rcpp) + ("r-snowballc" ,r-snowballc) + ("r-stringi" ,r-stringi))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://lincolnmullen.com/software/tokenizers/") + (synopsis "Fast, consistent tokenization of natural language text") + (description + "This is a package for converting natural language text into tokens. +It includes tokenizers for shingled n-grams, skip n-grams, words, word stems, +sentences, paragraphs, characters, shingled characters, lines, tweets, Penn +Treebank, regular expressions, as well as functions for counting characters, +words, and sentences, and a function for splitting longer texts into separate +documents, each with the same number of words. The tokenizers have a +consistent interface, and the package is built on the @code{stringi} and +@code{Rcpp} packages for fast yet correct tokenization in UTF-8 encoding.") + (license license:expat))) + +(define-public r-hunspell + (package + (name "r-hunspell") + (version "3.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "hunspell" version)) + (sha256 + (base32 + "0mwqw5p0ph083plm2hr2hqr50bjg2dw862dpsfm4l2fgyy3rryq1")))) + (properties `((upstream-name . "hunspell"))) + (build-system r-build-system) + (propagated-inputs + `(("r-digest" ,r-digest) + ("r-rcpp" ,r-rcpp))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://github.com/ropensci/hunspell#readme") + (synopsis "High-performance stemmer, tokenizer, and spell checker") + (description + "This package provides a low-level spell checker and morphological +analyzer based on the famous @code{hunspell} library. The package can analyze +or check individual words as well as parse text, LaTeX, HTML or XML documents. +For a more user-friendly interface use the @code{spelling} package which +builds on this package to automate checking of files, documentation and +vignettes in all common formats.") + ;; The hunspell library itself is available under one of GPL2, LGPL2.1, or + ;; MPL; in addition to these licenses the rest of the R wrapper is also + ;; available under the Expat license. + (license (list license:gpl2 + license:lgpl2.1 + license:mpl1.1 + license:expat)))) + +(define-public r-tidytext + (package + (name "r-tidytext") + (version "0.2.5") + (source + (origin + (method url-fetch) + (uri (cran-uri "tidytext" version)) + (sha256 + (base32 + "0kwbpffdnqrb6hgrrmrfnx890imbzvp5bs6sj1k72if28qijarm5")))) + (properties `((upstream-name . "tidytext"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-generics" ,r-generics) + ("r-hunspell" ,r-hunspell) + ("r-janeaustenr" ,r-janeaustenr) + ("r-matrix" ,r-matrix) + ("r-purrr" ,r-purrr) + ("r-rlang" ,r-rlang) + ("r-stringr" ,r-stringr) + ("r-tibble" ,r-tibble) + ("r-tokenizers" ,r-tokenizers))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://github.com/juliasilge/tidytext") + (synopsis "Text mining using dplyr, ggplot2, and other Tidy tools") + (description + "This is a package for text mining for word processing and sentiment +analysis using @code{dplyr}, @code{ggplot2}, and other Tidy tools.") + (license license:expat))) + +(define-public r-parsnip + (package + (name "r-parsnip") + (version "0.1.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "parsnip" version)) + (sha256 + (base32 + "12121qj1800i7g3km5kqzlb7hms55crmp6il575c2i475h5qx8d3")))) + (properties `((upstream-name . "parsnip"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-generics" ,r-generics) + ("r-globals" ,r-globals) + ("r-glue" ,r-glue) + ("r-magrittr" ,r-magrittr) + ("r-prettyunits" ,r-prettyunits) + ("r-purrr" ,r-purrr) + ("r-rlang" ,r-rlang) + ("r-tibble" ,r-tibble) + ("r-tidyr" ,r-tidyr) + ("r-vctrs" ,r-vctrs))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://parsnip.tidymodels.org") + (synopsis "Common API to modeling and analysis functions") + (description + "This package provides a common interface to allow users to specify a +model without having to remember the different argument names across different +functions or computational engines (e.g. R, Spark, Stan, etc).") + (license license:gpl2))) + +(define-public r-infer + (package + (name "r-infer") + (version "0.5.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "infer" version)) + (sha256 + (base32 + "1q0lnxnv8krv4n9z80sh4b442s89rvnbph5bddy34z83bkncwv2g")))) + (properties `((upstream-name . "infer"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-ggplot2" ,r-ggplot2) + ("r-glue" ,r-glue) + ("r-magrittr" ,r-magrittr) + ("r-purrr" ,r-purrr) + ("r-rlang" ,r-rlang) + ("r-tibble" ,r-tibble))) + (native-inputs + `(("r-knitr" ,r-knitr))) + (home-page "https://github.com/tidymodels/infer") + (synopsis "Tidy statistical inference") + (description + "The objective of this package is to perform inference using an +expressive statistical grammar that coheres with the Tidy design framework.") + (license license:cc0))) + +(define-public r-modeldata + (package + (name "r-modeldata") + (version "0.0.2") + (source + (origin + (method url-fetch) + (uri (cran-uri "modeldata" version)) + (sha256 + (base32 + "13q6hhbwqbwnjvg8bz6iwwfx96p1saqq3r34cjrbnpgzmr1nn11l")))) + (properties `((upstream-name . "modeldata"))) + (build-system r-build-system) + (home-page "https://modeldata.tidymodels.org") + (synopsis "Data sets useful for modeling packages") + (description + "This package provides data sets used for demonstrating or testing +model-related packages.") + (license license:expat))) + +(define-public r-tidymodels + (package + (name "r-tidymodels") + (version "0.1.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "tidymodels" version)) + (sha256 + (base32 + "0w2xnr642klmqlflkw6rkvqcrgs01i8f34nk9wdax3fsl1yx2wi4")))) + (properties `((upstream-name . "tidymodels"))) + (build-system r-build-system) + (propagated-inputs + `(("r-broom" ,r-broom) + ("r-cli" ,r-cli) + ("r-crayon" ,r-crayon) + ("r-dials" ,r-dials) + ("r-dplyr" ,r-dplyr) + ("r-ggplot2" ,r-ggplot2) + ("r-infer" ,r-infer) + ("r-magrittr" ,r-magrittr) + ("r-modeldata" ,r-modeldata) + ("r-parsnip" ,r-parsnip) + ("r-purrr" ,r-purrr) + ("r-recipes" ,r-recipes) + ("r-rlang" ,r-rlang) + ("r-rsample" ,r-rsample) + ("r-rstudioapi" ,r-rstudioapi) + ("r-tibble" ,r-tibble) + ("r-tidyr" ,r-tidyr) + ("r-tune" ,r-tune) + ("r-workflows" ,r-workflows) + ("r-yardstick" ,r-yardstick))) + (native-inputs + `(("r-knitr" ,r-knitr) + ("r-rmarkdown" ,r-rmarkdown) + ("pandoc" ,pandoc) + ("pandoc-citeproc" ,pandoc-citeproc))) ; for vignettes + (home-page "https://github.com/tidymodels/tidymodels") + (synopsis "Tidy collection for modeling and statistical analysis") + (description + "The tidy modeling \"verse\" is a collection of packages for modeling and +statistical analysis that share the underlying design philosophy, grammar, and +data structures of the tidyverse.") + (license license:gpl3))) + +(define-public r-mlecens + (package + (name "r-mlecens") + (version "0.1-4") + (source + (origin + (method url-fetch) + (uri (cran-uri "MLEcens" version)) + (sha256 + (base32 + "0zlmrcjraypscgs2v0w4s4hm7qccsmaz4hjsgqpn0058vx622945")))) + (properties `((upstream-name . "MLEcens"))) + (build-system r-build-system) + (home-page "http://stat.ethz.ch/~maathuis/") + (synopsis "Computation of the MLE for bivariate (interval) censored data") + (description + "This package contains functions to compute the nonparametric +@dfn{maximum likelihood estimator} (MLE) for the bivariate distribution of +@code{(X,Y)}, when realizations of @code{(X,Y)} cannot be observed directly. +To be more precise, we consider the situation where we observe a set of +rectangles that are known to contain the unobservable realizations of (X,Y). +We compute the MLE based on such a set of rectangles. The methods can also be +used for univariate censored data (see data set @code{cosmesis}), and for +censored data with competing risks (see data set @code{menopause}). The +package also provides functions to visualize the observed data and the MLE.") + (license license:gpl2+))) + +(define-public r-perm + (package + (name "r-perm") + (version "1.0-0.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "perm" version)) + (sha256 + (base32 + "0075awl66ynv10vypg63fcxk33qzvxddrp8mi4w08ysvimcyxijk")))) + (properties `((upstream-name . "perm"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/perm/") + (synopsis "Exact or asymptotic permutation tests") + (description + "This package provides several methods for performing permutation tests. +It has three main functions, to perform linear permutation tests. These tests +are tests where the test statistic is the sum of the product of a +covariate (usually group indicator) and the scores.") + ;; Any version of the GPL + (license license:gpl2+))) + +(define-public r-qtl + (package + (name "r-qtl") + (version "1.46-2") + (source + (origin + (method url-fetch) + (uri (cran-uri "qtl" version)) + (sha256 + (base32 + "0rbwcnvyy96gq1dsgpxx03pv423qya26h6ws5y0blj3blfdmj83a")))) + (build-system r-build-system) + (home-page "https://rqtl.org/") + (synopsis "R package for analyzing QTL experiments in genetics") + (description "R/qtl is an extension library for the R statistics system. +It is used to analyze experimental crosses for identifying genes contributing +to variation in quantitative traits (so-called quantitative trait loci, QTLs). + +Using a hidden Markov model, R/qtl estimates genetic maps, to identify +genotyping errors, and to perform single-QTL and two-QTL, two-dimensional +genome scans.") + (license license:gpl3))) + +(define-public r-qtl2 + (package + (name "r-qtl2") + (version "0.22-11") + (source (origin + (method url-fetch) + (uri (cran-uri "qtl2" version)) + (sha256 + (base32 "0dfdzjylqzc92dcszawc8cyinxccjm3p36v9vcq9ma818pqcanmr")))) + (build-system r-build-system) + (propagated-inputs + `(("r-data-table" ,r-data-table) + ("r-jsonlite" ,r-jsonlite) + ("r-rcpp" ,r-rcpp) + ("r-rcppeigen" ,r-rcppeigen) + ("r-rsqlite" ,r-rsqlite) + ("r-yaml" ,r-yaml))) + (home-page "https://kbroman.org/qtl2/") + (synopsis "Quantitative Trait Locus Mapping in Experimental Crosses") + (description + "This package provides a set of tools to perform @dfn{Quantitative Trait +Locus} (QTL) analysis in experimental crosses. It is a reimplementation of the +@code{R/qtl} package to better handle high-dimensional data and complex cross +designs. Broman et al. (2018) <doi:10.1534/genetics.118.301595>.") + (license license:gpl3))) + +(define-public r-seqminer + (package + (name "r-seqminer") + (version "8.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "seqminer" version)) + (sha256 + (base32 + "00jzj8mwb0zaiwlifd41b26mrq9mzigj18nc29dydi0r42hxg16i")))) + (build-system r-build-system) + (inputs + `(("zlib" ,zlib))) + (home-page "http://seqminer.genomic.codes") + (synopsis "Read nucleotide sequence data (VCF, BCF, and METAL formats)") + (description + "This package provides tools to integrate nucleotide sequencing +data (variant call format, e.g. VCF or BCF) or meta-analysis results in R.") + ;; Any version of the GPL is acceptable + (license (list license:gpl2+ license:gpl3+)))) + +(define-public r-maldiquant + (package + (name "r-maldiquant") + (version "1.19.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "MALDIquant" version)) + (sha256 + (base32 + "0b7kdz3x4sdq413h1q09l1qhcvdnnwv6fqsqwllks1cd3xy34c57")))) + (properties `((upstream-name . "MALDIquant"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/MALDIquant") + (synopsis "Quantitative analysis of mass spectrometry data") + (description + "This package provides a complete analysis pipeline for matrix-assisted +laser desorption/ionization-time-of-flight (MALDI-TOF) and other +two-dimensional mass spectrometry data. In addition to commonly used plotting +and processing methods it includes distinctive features, namely baseline +subtraction methods such as morphological filters (TopHat) or the +statistics-sensitive non-linear iterative peak-clipping algorithm (SNIP), peak +alignment using warping functions, handling of replicated measurements as well +as allowing spectra with different resolutions.") + (license license:gpl3+))) + +(define-public r-seurat + (package + (name "r-seurat") + (version "3.2.1") + (source (origin + (method url-fetch) + (uri (cran-uri "Seurat" version)) + (sha256 + (base32 + "0jipc4xpmx56jzc31w6nsl77ah8x8wq7jclg2mxhjql4ixkwmz54")))) + (properties `((upstream-name . "Seurat"))) + (build-system r-build-system) + (propagated-inputs + `(("r-cluster" ,r-cluster) + ("r-cowplot" ,r-cowplot) + ("r-fitdistrplus" ,r-fitdistrplus) + ("r-future" ,r-future) + ("r-future-apply" ,r-future-apply) + ("r-ggplot2" ,r-ggplot2) + ("r-ggrepel" ,r-ggrepel) + ("r-ggridges" ,r-ggridges) + ("r-httr" ,r-httr) + ("r-ica" ,r-ica) + ("r-igraph" ,r-igraph) + ("r-irlba" ,r-irlba) + ("r-jsonlite" ,r-jsonlite) + ("r-kernsmooth" ,r-kernsmooth) + ("r-leiden" ,r-leiden) + ("r-lmtest" ,r-lmtest) + ("r-mass" ,r-mass) + ("r-matrix" ,r-matrix) + ("r-matrixstats" ,r-matrixstats) + ("r-miniui" ,r-miniui) + ("r-patchwork" ,r-patchwork) + ("r-pbapply" ,r-pbapply) + ("r-plotly" ,r-plotly) + ("r-png" ,r-png) + ("r-rann" ,r-rann) + ("r-rcolorbrewer" ,r-rcolorbrewer) + ("r-rcpp" ,r-rcpp) + ("r-rcppannoy" ,r-rcppannoy) + ("r-rcppeigen" ,r-rcppeigen) + ("r-rcppprogress" ,r-rcppprogress) + ("r-reticulate" ,r-reticulate) + ("r-rlang" ,r-rlang) + ("r-rocr" ,r-rocr) + ("r-rsvd" ,r-rsvd) + ("r-rtsne" ,r-rtsne) + ("r-scales" ,r-scales) + ("r-sctransform" ,r-sctransform) + ("r-shiny" ,r-shiny) + ("r-spatstat" ,r-spatstat) + ("r-tibble" ,r-tibble) + ("r-uwot" ,r-uwot))) + (home-page "http://www.satijalab.org/seurat") + (synopsis "Seurat is an R toolkit for single cell genomics") + (description + "This package is an R package designed for QC, analysis, and +exploration of single cell RNA-seq data. It easily enables widely-used +analytical techniques, including the identification of highly variable genes, +dimensionality reduction; PCA, ICA, t-SNE, standard unsupervised clustering +algorithms; density clustering, hierarchical clustering, k-means, and the +discovery of differentially expressed genes and markers.") + (license license:gpl3))) + +(define-public r-phangorn + (package + (name "r-phangorn") + (version "2.5.5") + (source + (origin + (method url-fetch) + (uri (cran-uri "phangorn" version)) + (sha256 + (base32 + "0ihkaykqjmf80d8wrk3saphxvnv58zma6pd13633bd3cwanc33f5")))) + (build-system r-build-system) + (propagated-inputs + `(("r-ape" ,r-ape) + ("r-fastmatch" ,r-fastmatch) + ("r-igraph" ,r-igraph) + ("r-magrittr" ,r-magrittr) + ("r-matrix" ,r-matrix) + ("r-quadprog" ,r-quadprog) + ("r-rcpp" ,r-rcpp))) + (home-page "https://github.com/KlausVigo/phangorn") + (synopsis "Phylogenetic analysis in R") + (description + "Phangorn is a package for phylogenetic analysis in R. It supports +estimation of phylogenetic trees and networks using Maximum Likelihood, +Maximum Parsimony, distance methods and Hadamard conjugation.") + (license license:gpl2+))) + +(define-public r-diversitree + (package + (name "r-diversitree") + (version "0.9-14") + (source + (origin + (method url-fetch) + (uri (cran-uri "diversitree" version)) + (sha256 + (base32 + "0xkxw4n1rsagip51smh9k0h0lmnnvsajqcxma7yh95ifdkyrcyy4")))) + (build-system r-build-system) + (native-inputs + `(("gfortran" ,gfortran))) + (inputs `(("fftw" ,fftw) ("gsl" ,gsl))) + (propagated-inputs + `(("r-ape" ,r-ape) + ("r-desolve" ,r-desolve) + ("r-rcpp" ,r-rcpp) + ("r-subplex" ,r-subplex))) + (home-page "https://www.zoology.ubc.ca/prog/diversitree") + (synopsis "Comparative 'phylogenetic' analyses of diversification") + (description "This package contains a number of comparative \"phylogenetic\" +methods, mostly focusing on analysing diversification and character evolution. +Contains implementations of \"BiSSE\" (Binary State Speciation and Extinction) +and its unresolved tree extensions, \"MuSSE\" (Multiple State Speciation and +Extinction), \"QuaSSE\", \"GeoSSE\", and \"BiSSE-ness\" Other included methods +include Markov models of discrete and continuous trait evolution and constant +rate speciation and extinction.") + (license license:gpl2+))) + +(define-public r-absfiltergsea + (package + (name "r-absfiltergsea") + (version "1.5.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "AbsFilterGSEA" version)) + (sha256 + (base32 "15srxkxsvn38kd5frdrwfdf0ad8gskrd0h01wmdf9hglq8fjrp7w")))) + (properties `((upstream-name . "AbsFilterGSEA"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-deseq" ,r-deseq) + ("r-limma" ,r-limma) + ("r-rcpp" ,r-rcpp) + ("r-rcpparmadillo" ,r-rcpparmadillo))) + (home-page "https://cran.r-project.org/web/packages/AbsFilterGSEA/") + (synopsis "Improved false positive control of gene-permuting with absolute filtering") + (description + "This package provides a function that performs gene-permuting of a gene-set +enrichment analysis (GSEA) calculation with or without the absolute filtering. + Without filtering, users can perform (original) two-tailed or one-tailed +absolute GSEA.") + (license license:gpl2))) diff --git a/gnu/packages/crates-io.scm b/gnu/packages/crates-io.scm index d911ea2e01..0f0f0c28c9 100644 --- a/gnu/packages/crates-io.scm +++ b/gnu/packages/crates-io.scm @@ -293,8 +293,7 @@ the Rust programming language.") (base32 "19f8v503ibvlyr824g5ynicrh1lsmp2i0zmpszr8lqay0qw3vkl1")))) (arguments - `(#:skip-build? #t - #:cargo-inputs + `(#:cargo-inputs (("rust-memchr" ,rust-memchr-2)) #:cargo-development-inputs (("rust-csv" ,rust-csv-1.1) @@ -1031,7 +1030,7 @@ Mac, and Unix.") (define-public rust-autocfg-1.0 (package (name "rust-autocfg") - (version "1.0.0") + (version "1.0.1") (source (origin (method url-fetch) @@ -1040,7 +1039,7 @@ Mac, and Unix.") (string-append name "-" version ".tar.gz")) (sha256 (base32 - "17cv6pwb4q08s0ynpr4n8hv5299hcmhdgvdchzixfpw8y5qcgapq")))) + "0jj6i9zn4gjl03kjvziqdji6rwx8ykz8zk2ngpc331z2g3fk3c6d")))) (build-system cargo-build-system) (home-page "https://github.com/cuviper/autocfg") (synopsis @@ -1172,7 +1171,7 @@ trace (backtrace) at runtime in a Rust program.") (define-public rust-backtrace-sys-0.1 (package (name "rust-backtrace-sys") - (version "0.1.35") + (version "0.1.37") (source (origin (method url-fetch) @@ -1180,7 +1179,7 @@ trace (backtrace) at runtime in a Rust program.") (file-name (string-append name "-" version ".crate")) (sha256 (base32 - "066iviphi72mx9hd3njzsplk5v45jhi10mrccbbyij391ahsps3x")))) + "16a3igz22q9lnnjjr77f4k8ci48v8zdwrs67khx3h7wx3jzfpyqq")))) (build-system cargo-build-system) (arguments `(#:cargo-inputs @@ -2315,7 +2314,7 @@ in a byte slice, fast.") (define-public rust-bytemuck-1 (package (name "rust-bytemuck") - (version "1.3.1") + (version "1.4.0") (source (origin (method url-fetch) @@ -2324,14 +2323,45 @@ in a byte slice, fast.") (string-append name "-" version ".tar.gz")) (sha256 (base32 - "1scaac5xbfynzbpvz9yjbmg9ag2jalxfijapwlqh7xldf4li0ynv")))) + "071043n73hwi55z9c55ga4v52v8a7ri56gqja8r98clkdyxns14j")))) (build-system cargo-build-system) + (arguments + `(#:cargo-inputs + (("rust-bytemuck-derive" ,rust-bytemuck-derive-1)))) (home-page "https://github.com/Lokathor/bytemuck") (synopsis "Crate for mucking around with piles of bytes") (description "This package provides a crate for mucking around with piles of bytes.") (license license:zlib))) +(define-public rust-bytemuck-derive-1 + (package + (name "rust-bytemuck-derive") + (version "1.0.0") + (source + (origin + (method url-fetch) + (uri (crate-uri "bytemuck-derive" version)) + (file-name (string-append name "-" version ".tar.gz")) + (sha256 + (base32 + "1k59b6g2d87nf32qwhp73vng3al0zklxg64iiwf0pkxy74xf5ni8")))) + (build-system cargo-build-system) + (arguments + `(#:skip-build? #t + #:cargo-inputs + (("rust-proc-macro2" ,rust-proc-macro2-1) + ("rust-quote" ,rust-quote-1) + ("rust-syn" ,rust-syn-1)) + #:cargo-development-inputs + (("rust-bytemuck" ,rust-bytemuck-1)))) + (home-page "https://github.com/Lokathor/bytemuck") + (synopsis "Derive proc-macros for @code{bytemuck}") + (description + "This package derives proc-macros for the @code{bytemuck} crate.") + (license + (list license:zlib license:asl2.0 license:expat)))) + (define-public rust-byteorder-1.3 (package (name "rust-byteorder") @@ -2481,7 +2511,7 @@ exposed as Reader/Writer streams.") (define-public rust-bzip2-sys-0.1 (package (name "rust-bzip2-sys") - (version "0.1.7") + (version "0.1.9+1.0.8") (source (origin (method url-fetch) @@ -2490,11 +2520,11 @@ exposed as Reader/Writer streams.") (string-append name "-" version ".tar.gz")) (sha256 (base32 - "0pz2mdhkk8yphiqdh2kghdxb60kqyd10lfrjym3r4k5dylvam135")) + "0pi8lxzb1104q9cpvv1jgnk909cggqh2zcdhywqwlbq6c2i3jfxd")) (modules '((guix build utils))) (snippet '(begin - (delete-file-recursively "bzip2-1.0.6") + (delete-file-recursively "bzip2-1.0.8") (delete-file "build.rs") ;; Inspired by Debian's patch. (with-output-to-file "build.rs" @@ -2507,7 +2537,8 @@ exposed as Reader/Writer streams.") (arguments `(#:cargo-inputs (("rust-libc" ,rust-libc-0.2) - ("rust-cc" ,rust-cc-1)))) + ("rust-cc" ,rust-cc-1) + ("rust-pkg-config" ,rust-pkg-config-0.3)))) (home-page "https://github.com/alexcrichton/bzip2-rs") (synopsis "Rust bindings to libbzip2") (description @@ -5049,7 +5080,7 @@ Transparency logs for use with sct crate.") `(#:cargo-inputs (("rust-libc" ,rust-libc-0.2) ("rust-libnghttp2-sys" ,rust-libnghttp2-sys-0.1) - ("rust-libz-sys" ,rust-libz-sys-1.0) + ("rust-libz-sys" ,rust-libz-sys-1) ("rust-openssl-sys" ,rust-openssl-sys-0.9) ("rust-winapi" ,rust-winapi-0.3) ("rust-cc" ,rust-cc-1) @@ -7408,7 +7439,7 @@ cross platform API.") ("rust-crc32fast" ,rust-crc32fast-1.2) ("rust-futures" ,rust-futures-0.1) ("rust-libc" ,rust-libc-0.2) - ("rust-libz-sys" ,rust-libz-sys-1.0) + ("rust-libz-sys" ,rust-libz-sys-1) ("rust-miniz-sys" ,rust-miniz-sys-0.1) ("rust-miniz-oxide" ,rust-miniz-oxide-0.3) ("rust-tokio-io" ,rust-tokio-io-0.1)) @@ -7790,7 +7821,7 @@ values to other threads.") (arguments `(#:cargo-inputs (("rust-libc" ,rust-libc-0.2) - ("rust-libz-sys" ,rust-libz-sys-1.0) + ("rust-libz-sys" ,rust-libz-sys-1) ("rust-pkg-config" ,rust-pkg-config-0.3)))) (inputs `(("freetype" ,freetype) @@ -8966,6 +8997,37 @@ retrieving random data from system source.") (description "This package provides raw FFI bindings for GNU Gettext.") (license license:expat))) +(define-public rust-gfa-0.6 + (package + (name "rust-gfa") + (version "0.6.2") + (source + (origin + (method url-fetch) + (uri (crate-uri "gfa" version)) + (file-name + (string-append name "-" version ".tar.gz")) + (sha256 + (base32 + "0ghmy4r0324s6vvmj9nmh326346nkwm7nybnpcpswnjvf02b85gw")))) + (build-system cargo-build-system) + (arguments + `(#:cargo-inputs + (("rust-bstr" ,rust-bstr-0.2) + ("rust-bytemuck" ,rust-bytemuck-1) + ("rust-lazy-static" ,rust-lazy-static-1) + ("rust-nom" ,rust-nom-5) + ("rust-regex" ,rust-regex-1) + ("rust-serde" ,rust-serde-1)) + #:cargo-development-inputs + (("rust-criterion" ,rust-criterion-0.3)))) + (home-page "https://github.com/chfi/rs-gfa") + (synopsis "Library for graphs in the GFA (Graphical Fragment Assembly) format") + (description + "This package provides a library for working with graphs in the +@acronym{GFA, Graphical Fragment Assembly} format.") + (license license:expat))) + (define-public rust-gfx-0.18 (package (name "rust-gfx") @@ -12455,7 +12517,7 @@ macros on libc without stdlib.") (arguments `(#:cargo-inputs (("rust-libc" ,rust-libc-0.2) - ("rust-libz-sys" ,rust-libz-sys-1.0) + ("rust-libz-sys" ,rust-libz-sys-1) ("rust-libssh2-sys" ,rust-libssh2-sys-0.2) ("rust-openssl-sys" ,rust-openssl-sys-0.9) ;; Build dependencies: @@ -12518,7 +12580,7 @@ macros on libc without stdlib.") (("rust-curl-sys" ,rust-curl-sys-0.4) ("rust-libc" ,rust-libc-0.2) ("rust-libssh2-sys" ,rust-libssh2-sys-0.2) - ("rust-libz-sys" ,rust-libz-sys-1.0) + ("rust-libz-sys" ,rust-libz-sys-1) ("rust-openssl-sys" ,rust-openssl-sys-0.9) ("rust-cc" ,rust-cc-1) ("rust-pkg-config" ,rust-pkg-config-0.3)))))) @@ -12615,7 +12677,7 @@ functions and static variables these libraries contain.") (define-public rust-libnghttp2-sys-0.1 (package (name "rust-libnghttp2-sys") - (version "0.1.2") + (version "0.1.4+1.41.0") (source (origin (method url-fetch) @@ -12623,18 +12685,30 @@ functions and static variables these libraries contain.") (file-name (string-append name "-" version ".tar.gz")) (sha256 (base32 - "0qr4lyh7righx9n22c7amlcpk906rn1jnb2zd6gdfpa3yi24s982")) + "1wcd93a8cw1h9y25834160y6ng982fi0qcd277hpjvhnvz34wqh3")) (modules '((guix build utils))) (snippet - '(begin (delete-file-recursively "nghttp2") #t)))) + '(begin + (delete-file-recursively "nghttp2") + (substitute* "Cargo.toml" + (("false") + "false\n[build-dependencies.pkg-config]\nversion = \"0.3\"\n")) + (delete-file "build.rs") + (with-output-to-file "build.rs" + (lambda _ + (format #t "fn main() {~@ + println!(\"cargo:rustc-link-lib=nghttp2\");~@ + }~%"))) + #t)))) (build-system cargo-build-system) (arguments - `(#:skip-build? #t ; Uses unstable features - #:cargo-inputs + `(#:cargo-inputs (("rust-libc" ,rust-libc-0.2) - ("rust-cc" ,rust-cc-1)))) + ("rust-cc" ,rust-cc-1) + ("rust-pkg-config" ,rust-pkg-config-0.3)))) (inputs - `(("nghttp2" ,nghttp2))) + `(("nghttp2" ,nghttp2 "lib") + ("pkg-config" ,pkg-config))) (home-page "https://github.com/alexcrichton/nghttp2-rs") (synopsis "FFI bindings for libnghttp2 (nghttp2)") (description @@ -12668,10 +12742,10 @@ functions and static variables these libraries contain.") (description "Native bindings to the libsqlite3 library") (license license:expat))) -(define-public rust-libz-sys-1.0 +(define-public rust-libz-sys-1 (package (name "rust-libz-sys") - (version "1.0.25") + (version "1.1.1") (source (origin (method url-fetch) @@ -12679,16 +12753,19 @@ functions and static variables these libraries contain.") (file-name (string-append name "-" version ".tar.gz")) (sha256 (base32 - "1gjycyl2283525abks98bhxa4r259m617xfm5z52p3p3c8ry9d9f")) + "1q25cb8vs113si7q2p0innhi8jk0wpq37hqi2wcc219hcmw43cr3")) (modules '((guix build utils))) (snippet - '(begin (delete-file-recursively "src/zlib") #t)))) + '(begin (delete-file-recursively "src/zlib") + (delete-file-recursively "src/zlib-ng") + #t)))) (build-system cargo-build-system) (arguments `(#:cargo-inputs (("rust-libc" ,rust-libc-0.2) ;; Build dependencies: ("rust-cc" ,rust-cc-1) + ("rust-cmake" ,rust-cmake-0.1) ("rust-pkg-config" ,rust-pkg-config-0.3) ("rust-vcpkg" ,rust-vcpkg-0.2)))) (native-inputs @@ -12830,7 +12907,7 @@ pairs in insertion order.") (define-public rust-libssh2-sys-0.2 (package (name "rust-libssh2-sys") - (version "0.2.14") + (version "0.2.19") (source (origin (method url-fetch) @@ -12838,7 +12915,7 @@ pairs in insertion order.") (file-name (string-append name "-" version ".tar.gz")) (sha256 (base32 - "042gsgbvxgm5by4mk906j3zm4qdvzcfhjxrb55is1lrr6f0nxain")) + "0mkhw4pksbz7gldj8hia7k6npc479n1x09i8r0pm275sac424ina")) (modules '((guix build utils))) (snippet '(begin (delete-file-recursively "libssh2") #t)))) @@ -12846,7 +12923,7 @@ pairs in insertion order.") (arguments `(#:cargo-inputs (("rust-libc" ,rust-libc-0.2) - ("rust-libz-sys" ,rust-libz-sys-1.0) + ("rust-libz-sys" ,rust-libz-sys-1) ("rust-openssl-sys" ,rust-openssl-sys-0.9) ;; Build dependencies: ("rust-cc" ,rust-cc-1) @@ -16008,21 +16085,21 @@ system for OpenSSL.") (define-public rust-openssl-sys-0.9 (package (name "rust-openssl-sys") - (version "0.9.53") + (version "0.9.58") (source (origin (method url-fetch) (uri (crate-uri "openssl-sys" version)) (file-name (string-append name "-" version ".tar.gz")) (sha256 - (base32 "0vvk8vzrc73y8n5rf4yj3x8ygyxjaz7wxrbxiwqi7qy0gyp1cpa6")) + (base32 "1pkq3x8w16kqvkg75g4w7nny56w9clssww0ibpzg015n153xnhm8")) (patches (search-patches "rust-openssl-sys-no-vendor.patch")))) (build-system cargo-build-system) (arguments `(#:cargo-inputs (("rust-libc" ,rust-libc-0.2) ;; Build dependencies: - ("rust-autocfg" ,rust-autocfg-0.1) + ("rust-autocfg" ,rust-autocfg-1.0) ("rust-cc" ,rust-cc-1) ("rust-pkg-config" ,rust-pkg-config-0.3) ("rust-vcpkg" ,rust-vcpkg-0.2)) @@ -17040,7 +17117,7 @@ in pure Rust.") (define-public rust-pcre2-sys-0.2 (package (name "rust-pcre2-sys") - (version "0.2.2") + (version "0.2.5") (source (origin (method url-fetch) @@ -17049,7 +17126,7 @@ in pure Rust.") (string-append name "-" version ".tar.gz")) (sha256 (base32 - "0nwdvc43dkb89qmm5q8gw1zyll0wsfqw7kczpn23mljra3874v47")) + "08mp6yxrvadplwd0drdydzskvzapr6dri9fyy7xvhzn3krg0xhyy")) (modules '((guix build utils))) (snippet '(begin (delete-file-recursively "pcre2") #t)))) diff --git a/gnu/packages/crypto.scm b/gnu/packages/crypto.scm index 53af54c965..028c140185 100644 --- a/gnu/packages/crypto.scm +++ b/gnu/packages/crypto.scm @@ -518,7 +518,7 @@ user's graphical desktop.") (define-public scrypt (package (name "scrypt") - (version "1.2.1") + (version "1.3.1") (source (origin (method url-fetch) @@ -526,20 +526,24 @@ user's graphical desktop.") version ".tgz")) (sha256 (base32 - "0xy5yhrwwv13skv9im9vm76rybh9f29j2dh4hlh2x01gvbkza8a6")))) + "1hnl0r6pmyxiy4dmafmqk1db7wpc0x9rqpzqcwr9d2cmghcj6byz")))) (build-system gnu-build-system) (arguments - `(#:phases (modify-phases %standard-phases - (add-after 'unpack 'patch-command-invocations + `(#:license-file-regexp "COPYRIGHT" + #:phases (modify-phases %standard-phases + (add-after 'unpack 'patch-$PATH-assumptions (lambda _ + (substitute* "configure" + (("\\{POSIX_PATH\\}") + "{PATH}")) (substitute* "Makefile.in" (("command -p") "")) #t)) (add-after 'install 'install-docs (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref %outputs "out")) - (misc (string-append out "/share/doc/scrypt"))) - (install-file "FORMAT" misc) + (doc (string-append out "/share/doc/" ,name "-" ,version))) + (install-file "FORMAT" doc) #t)))))) (inputs `(("openssl" ,openssl))) @@ -765,7 +769,7 @@ data on your platform, so the seed itself will be as random as possible. "libdir=" out "/lib\n" "includedir=" out "/include\n\n" "Name: libcrypto++-" ,version "\n" - "Description: Class library of cryptographic schemes" + "Description: Class library of cryptographic schemes\n" "Version: " ,version "\n" "Libs: -L${libdir} -lcryptopp\n" "Cflags: -I${includedir}\n")) @@ -1057,6 +1061,58 @@ Features: (home-page "https://github.com/bitcoin-core/secp256k1") (license license:unlicense)))) +(define-public libsecp256k1-bitcoin-cash + (package + (name "libsecp256k1-bitcoin-cash") + (version "0.22.1") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/Bitcoin-ABC/secp256k1") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1rnif3iny6pz1r3g69bagzr342mm3x0v66b60csnmm1rg44bd5v1")))) + (build-system gnu-build-system) + (native-inputs + `(("autoconf" ,autoconf) + ("automake" ,automake) + ("libtool" ,libtool))) + (arguments + '(#:configure-flags '("--enable-module-recovery" + "--enable-experimental" + "--enable-module-ecdh" + "--disable-jni" + "--with-bignum=no" + "--enable-module-schnorr" + "--disable-static" + "--enable-shared"))) + (synopsis "Optimized C library for EC operations on curve secp256k1") + (description + "Optimized C library for cryptographic operations on curve secp256k1. + +This library is used for consensus critical cryptographic operations on the +Bitcoin Cash network. + +Features: + +@itemize +@item secp256k1 ECDSA signing/verification and key generation. +@item secp256k1 Schnorr signing/verification (Bitcoin Cash Schnorr variant). +@item Additive and multiplicative tweaking of secret/public keys. +@item Serialization/parsing of secret keys, public keys, signatures. +@item Constant time, constant memory access signing and pubkey generation. +@item Derandomized ECDSA (via RFC6979 or with a caller provided function). +@item Very efficient implementation. +@item Suitable for embedded systems. +@item Optional module for public key recovery. +@item Optional module for ECDH key exchange (experimental). +@item Optional module for multiset hash (experimental). +@end itemize\n") + (home-page "https://github.com/Bitcoin-ABC/secp256k1") + (license license:expat))) + (define-public stoken (package (name "stoken") diff --git a/gnu/packages/datastructures.scm b/gnu/packages/datastructures.scm index a9f30831ec..3203f91608 100644 --- a/gnu/packages/datastructures.scm +++ b/gnu/packages/datastructures.scm @@ -2,7 +2,7 @@ ;;; Copyright © 2015, 2016, 2018, 2019 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2016, 2017, 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2018 Meiyo Peng <meiyo.peng@gmail.com> -;;; Copyright © 2019 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2019, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2020 Mark H Weaver <mhw@netris.org> ;;; ;;; This file is part of GNU Guix. @@ -236,14 +236,34 @@ to the structure and choosing one or more fields to act as the key.") "0m542xpys54bni29zibgrfpgpd0zgyny4h131virxsanixsbz52z"))))))) (build-system cmake-build-system) (arguments - '(#:phases + `(#:phases (modify-phases %standard-phases (add-after 'install 'install-static-library (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (copy-file "lib/libsdsl_static.a" (string-append out "/lib/libsdsl.a"))) - #t))))) + #t)) + (add-after 'install 'install-pkgconfig-file + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (lib (string-append out "/lib"))) + (mkdir-p (string-append lib "/pkgconfig")) + (with-output-to-file (string-append lib "/pkgconfig/sdsl-lite.pc") + (lambda _ + (format #t "prefix=~a~@ + exec_prefix=${prefix}~@ + libdir=${exec_prefix}/lib~@ + includedir=${prefix}/include~@ + ~@ + ~@ + Name: sdsl~@ + Version: ~a~@ + Description: SDSL: Succinct Data Structure Library~@ + Libs: -L${libdir} -lsdsl -ldivsufsort -ldivsufsort64~@ + Cflags: -I${includedir}~%" + out ,version))) + #t)))))) (native-inputs `(("libdivsufsort" ,libdivsufsort))) (home-page "https://github.com/simongog/sdsl-lite") diff --git a/gnu/packages/dav.scm b/gnu/packages/dav.scm index b9e210c84b..8692a49c50 100644 --- a/gnu/packages/dav.scm +++ b/gnu/packages/dav.scm @@ -2,6 +2,7 @@ ;;; Copyright © 2015, 2016, 2017 Leo Famulari <leo@famulari.name> ;;; Copyright © 2018, 2019 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2020 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2020 Vinicius Monego <monego@posteo.net> ;;; ;;; This file is part of GNU Guix. ;;; @@ -23,29 +24,45 @@ #:use-module (guix download) #:use-module (guix licenses) #:use-module (guix packages) + #:use-module (guix git-download) #:use-module (gnu packages) #:use-module (gnu packages check) #:use-module (gnu packages python) + #:use-module (gnu packages python-check) + #:use-module (gnu packages python-crypto) #:use-module (gnu packages python-web) #:use-module (gnu packages python-xyz) - #:use-module (gnu packages sphinx)) + #:use-module (gnu packages sphinx) + #:use-module (gnu packages time) + #:use-module (gnu packages xml)) (define-public radicale (package (name "radicale") - (version "1.1.6") - (source (origin - (method url-fetch) - (uri (pypi-uri "Radicale" version)) - (sha256 - (base32 - "0ay90nj6fmr2aq8imi0mbjl4m2rzq7a83ikj8qs9gxsylj71j1y0")))) + (version "3.0.4") + (source + (origin + ;; There are no tests in the PyPI tarball. + (method git-fetch) + (uri (git-reference + (url "https://github.com/Kozea/Radicale") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0hj9mmhrj32mzhxlnjcfijb7768cyjsn603nalp54clgb2gkmvw8")))) (build-system python-build-system) - (arguments - '(#:tests? #f)) ; The tests are not distributed in the PyPi release. + (native-inputs + `(("python-pytest" ,python-pytest) + ("python-pytest-cov" ,python-pytest-cov) + ("python-pytest-flake8" ,python-pytest-flake8) + ("python-pytest-isort" ,python-pytest-isort) + ("python-pytest-runner" ,python-pytest-runner) + ("python-waitress" ,python-waitress))) (propagated-inputs - ;; TODO: Add python-pam - `(("python-requests" ,python-requests))) + `(("python-dateutil" ,python-dateutil) + ("python-defusedxml" ,python-defusedxml) + ("python-passlib" ,python-passlib) + ("python-vobject" ,python-vobject))) (synopsis "Basic CalDAV and CardDAV server") (description "Radicale is a CalDAV and CardDAV server for UNIX-like platforms. Calendars and address books are available for both local and remote @@ -58,6 +75,44 @@ clients.") (home-page "https://radicale.org/") (license gpl3+))) +(define-public xandikos + (package + (name "xandikos") + (version "0.2.3") + (source + (origin + (method url-fetch) + (uri (pypi-uri "xandikos" version)) + (sha256 + (base32 "13ikmcja9p42azb5ccqj2bw98zybna6zlflj10hqy0kvbib70l94")))) + (build-system python-build-system) + (propagated-inputs + `(("python-aiohttp" ,python-aiohttp) + ("python-defusedxml" ,python-defusedxml) + ("python-dulwich" ,python-dulwich) + ("python-icalendar" ,python-icalendar) + ("python-jinja2" ,python-jinja2) + ("python-multidict" ,python-multidict))) + (home-page "https://www.xandikos.org/") + (synopsis "Lightweight CalDAV/CardDAV server") + (description + "Xandikos is a lightweight yet complete CardDAV/CalDAV server that backs +onto a Git repository. + +Features: + +@itemize +@item Easy to set up +@item Share calendars (events, todo items, journal entries) via CalDAV and +contacts (vCard) via CardDAV +@item Automatically keep history and back up changes in Git +@item Supports synchronization extensions for CalDAV/CardDAV for quick and +efficient syncing +@item Automatically keep history and back up +@item Works with all tested CalDAV and CardDAV clients +@end itemize") + (license gpl3+))) + (define-public vdirsyncer (package (name "vdirsyncer") diff --git a/gnu/packages/debian.scm b/gnu/packages/debian.scm index 1112a90a2e..52e7ec223a 100644 --- a/gnu/packages/debian.scm +++ b/gnu/packages/debian.scm @@ -202,7 +202,7 @@ unpacking them into a directory which can eventually be chrooted into.") (define-public debianutils (package (name "debianutils") - (version "4.11") + (version "4.11.1") (source (origin (method git-fetch) (uri (git-reference @@ -211,7 +211,7 @@ unpacking them into a directory which can eventually be chrooted into.") (file-name (git-file-name "debianutils" version)) (sha256 (base32 - "1fmhzvymajack7kh8g4qjbwd9mq85z6rxl1psd1sm67s5695i9rc")))) + "18ypb7fivch53wwrdf73yhf1fhkwn9kvw1kfdc1m450241d6191w")))) (build-system gnu-build-system) (arguments '(#:phases (modify-phases %standard-phases diff --git a/gnu/packages/disk.scm b/gnu/packages/disk.scm index cab3602560..79e187e283 100644 --- a/gnu/packages/disk.scm +++ b/gnu/packages/disk.scm @@ -689,7 +689,7 @@ passphrases.") (define-public ndctl (package (name "ndctl") - (version "68") + (version "69") (source (origin (method git-fetch) (uri (git-reference @@ -698,7 +698,7 @@ passphrases.") (file-name (git-file-name name version)) (sha256 (base32 - "0xmim7z4qp6x2ggndnbwd940c73pa1qlf3hxyn3qh5pyr69nh9y8")))) + "1l7p0ycj27d4z07gf9qp796xpg16kfsg3rwx6plhilbhip1as4w7")))) (build-system gnu-build-system) (native-inputs `(("asciidoc" ,asciidoc) diff --git a/gnu/packages/dns.scm b/gnu/packages/dns.scm index c0d5d64ced..8bb34111d2 100644 --- a/gnu/packages/dns.scm +++ b/gnu/packages/dns.scm @@ -803,14 +803,14 @@ Extensions} (DNSSEC).") (define-public knot (package (name "knot") - (version "2.9.5") + (version "2.9.6") (source (origin (method url-fetch) (uri (string-append "https://secure.nic.cz/files/knot-dns/" "knot-" version ".tar.xz")) (sha256 - (base32 "0xmzmhd2m9rb24clrrd9k058harsq67nyjplpbyxvy1g46xah28i")) + (base32 "1rxjjisr6rz1wa4279ghvj5zzhgyjhncmb9dkzqm8nw2qs1jhx5z")) (modules '((guix build utils))) (snippet '(begin diff --git a/gnu/packages/docker.scm b/gnu/packages/docker.scm index 4beba12c11..bc7e02ec46 100644 --- a/gnu/packages/docker.scm +++ b/gnu/packages/docker.scm @@ -50,9 +50,9 @@ (define %docker-version "19.03.12") -(define-public python-docker-py +(define-public python-docker (package - (name "python-docker-py") + (name "python-docker") (version "3.7.3") (source (origin @@ -116,7 +116,7 @@ client.") (inputs `(("python-cached-property" ,python-cached-property) - ("python-docker-py" ,python-docker-py) + ("python-docker" ,python-docker) ("python-dockerpty" ,python-dockerpty) ("python-docopt" ,python-docopt) ("python-jsonschema" ,python-jsonschema) diff --git a/gnu/packages/dunst.scm b/gnu/packages/dunst.scm index 5b20d6d013..2741336746 100644 --- a/gnu/packages/dunst.scm +++ b/gnu/packages/dunst.scm @@ -36,7 +36,7 @@ (define-public dunst (package (name "dunst") - (version "1.4.1") + (version "1.5.0") (source (origin (method git-fetch) (uri (git-reference @@ -45,7 +45,7 @@ (file-name (git-file-name name version)) (sha256 (base32 - "0xjj1f2jr1ja5grj6wrx5jjz1sx5fpqnvkw7nqi4452j3nc4p4l2")))) + "0irwkqcgwkqaylcpvqgh25gn2ysbdm2kydipxfzcq1ddj9ns6f9c")))) (build-system gnu-build-system) (arguments '(#:tests? #f ; no check target diff --git a/gnu/packages/ebook.scm b/gnu/packages/ebook.scm index aab4155d3d..b7c78b6a64 100644 --- a/gnu/packages/ebook.scm +++ b/gnu/packages/ebook.scm @@ -246,6 +246,29 @@ (assoc-ref inputs "js-mathjax") "/share/javascript/mathjax")) (invoke "python2" "setup.py" "rapydscript"))) + (replace 'wrap + ;; Here we wrap PYTHONPATH exactly as it would be in + ;; python-build-system, plus the addition of + ;; QTWEBENGINEPROCESS_PATH, fixing a bug where Calibre would not + ;; find Qtwebengine. + (lambda* (#:key inputs outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (bin (string-append out "/bin")) + (python (assoc-ref inputs "python")) + (site-packages + (cons (string-append out "/lib/python" + (python-version python) + "/site-packages") + (search-path-as-string->list (getenv "PYTHONPATH")))) + (qtwebengineprocess + (string-append (assoc-ref inputs "qtwebengine") + "/lib/qt5/libexec/QtWebEngineProcess"))) + (for-each (lambda (program) + (wrap-program program + `("QTWEBENGINEPROCESS_PATH" = (,qtwebengineprocess)) + `("PYTHONPATH" prefix ,site-packages))) + (find-files bin "."))) + #t)) (add-after 'install 'install-man-pages (lambda* (#:key outputs #:allow-other-keys) (copy-recursively diff --git a/gnu/packages/education.scm b/gnu/packages/education.scm index ed1401c39b..32807fa05f 100644 --- a/gnu/packages/education.scm +++ b/gnu/packages/education.scm @@ -8,6 +8,7 @@ ;;; Copyright © 2020 Robert Smith <robertsmith@posteo.net> ;;; Copyright © 2020 Guy Fleury Iteriteka <gfleury@disroot.org> ;;; Copyright © 2020 Jakub Kądziołka <kuba@kadziolka.net> +;;; Copyright © 2020 Prafulla Giri <pratheblackdiamond@gmail.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -486,7 +487,7 @@ specialized device.") Comment[ca]=Conjunt de jocs educatius per a xiquets~@ Comment[es]=Conjunto de juegos educativos para niños~@ Comment[de]=Sammlung mit lehrreichen Spielen für kleine Kinder~@ - Exec=~a/bin/childsplay.py~@ + Exec=~a/bin/childsplay~@ Terminal=false~@ Icon=logo_cp.svg~@ Type=Application~@ @@ -612,14 +613,14 @@ Portuguese, Spanish and Italian.") (define-public fet (package (name "fet") - (version "5.46.0") + (version "5.46.1") (source (origin (method url-fetch) (uri (string-append "https://www.lalescu.ro/liviu/fet/download/" "fet-" version ".tar.bz2")) (sha256 - (base32 "1vcsm12lqf84mz9ppw2knjyv5ss2ws0dblbp418hll91dry7m49a")))) + (base32 "1sakzizjsyjn6705zl283i81zxn1gxskg2i4jv7iq75vw3nzm6kv")))) (build-system gnu-build-system) (arguments `(#:phases diff --git a/gnu/packages/emacs-xyz.scm b/gnu/packages/emacs-xyz.scm index e5ceef86a0..342adc6dd0 100644 --- a/gnu/packages/emacs-xyz.scm +++ b/gnu/packages/emacs-xyz.scm @@ -118,6 +118,7 @@ #:use-module (gnu packages curl) #:use-module (gnu packages databases) #:use-module (gnu packages dictionaries) + #:use-module (gnu packages djvu) #:use-module (gnu packages emacs) #:use-module (gnu packages guile) #:use-module (gnu packages gtk) @@ -175,6 +176,7 @@ #:use-module (gnu packages xdisorg) #:use-module (gnu packages shells) #:use-module (gnu packages sqlite) + #:use-module (gnu packages ghostscript) #:use-module (gnu packages gnupg) #:use-module (gnu packages video) #:use-module (gnu packages haskell-xyz) @@ -681,6 +683,30 @@ Alternatively the menu can be bound globally, for example: @code{(global-set-key [S-down-mouse-3] 'minions-minor-modes-menu)}.") (license license:gpl3+))) +(define-public emacs-moody + (package + (name "emacs-moody") + (version "0.5.3") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/tarsius/moody") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1xyw4l42053595r76lj8safsx6pj25as0107wd96by3h7dg9m586")))) + (build-system emacs-build-system) + (home-page "https://github.com/tarsius/moody") + (synopsis "Tabs and ribbons for Emacs mode-line") + (description + "@code{emacs-moody} provides utilities for displaying elements of +the mode line as tabs and ribbons. It also provides replacements for a few +built-in elements. The biggest difference to similar packages is that +this one is much simpler and much more consistent. When using this package, +then only the color of the mode line changes when a window becomes in-/active.") + (license license:gpl3+))) + (define-public emacs-treepy (package (name "emacs-treepy") @@ -959,8 +985,13 @@ replacement.") ;; native input. (lambda _ (with-directory-excursion "tests" + ;; File `haskell-indent-tests.el' fails with + ;; `haskell-indent-put-region-in-literate-2' + ;; on Emacs 27.1+ + ;; XXX: https://github.com/haskell/haskell-mode/issues/1714 (for-each delete-file - '("haskell-customize-tests.el" + '("haskell-indent-tests.el" + "haskell-customize-tests.el" "inferior-haskell-tests.el"))) #t)) (replace 'install @@ -1307,8 +1338,6 @@ regexp-like arguments to @code{skip-chars-forward} and (base32 "134fj493sdn93pyyac8rpz1fzahzmayvphsrmqp3wvgysmfqm38l")))) (build-system emacs-build-system) - (propagated-inputs - `(("emacs-seq" ,emacs-seq))) (home-page "https://github.com/Malabarba/elisp-bug-hunter") (synopsis "Hunt down errors by bisecting elisp files") (description @@ -1909,6 +1938,21 @@ as a library for other Emacs packages.") #:exclude '("^tests/" "^latex/README") #:phases (modify-phases %standard-phases + (add-after 'unpack 'configure + (lambda* (#:key inputs #:allow-other-keys) + (emacs-substitute-variables "preview.el" + ("preview-gs-command" + (string-append (assoc-ref inputs "ghostscript") "/bin/gs"))) + (substitute* "preview.el" + (("\"dvipng ") + (string-append "\"" (assoc-ref inputs "texlive") + "/bin/dvipng ")) + (("\"dvips ") + (string-append "\"" (assoc-ref inputs "texlive") + "/bin/dvips ")) + (("\"pdf2dsc ") + (string-append "\"" (assoc-ref inputs "ghostscript") + "/bin/pdf2dsc "))))) (add-after 'install 'install-doc (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) @@ -1923,7 +1967,8 @@ as a library for other Emacs packages.") (native-inputs `(("perl" ,perl))) (inputs - `(("texlive" ,(texlive-union (list texlive-amsfonts))))) + `(("ghostscript" ,ghostscript) + ("texlive" ,(texlive-union (list texlive-amsfonts))))) (home-page "https://www.gnu.org/software/auctex/") (synopsis "Integrated environment for TeX") (description @@ -2058,7 +2103,7 @@ Lock key.") (define-public emacs-chronometrist (package (name "emacs-chronometrist") - (version "0.5.3") + (version "0.5.5") (source (origin (method git-fetch) @@ -2067,7 +2112,7 @@ Lock key.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "0jz35972m372kx9x8mgf42zhzdw2w9wv2ri52chfb2fin4bh1biy")))) + (base32 "1zccyfpgq68ixrcl8jq2r38165ngkqrb42y2hkyab6gxhvh4wkpl")))) (build-system emacs-build-system) (arguments `(#:phases @@ -2091,7 +2136,8 @@ Lock key.") (find-files "." "\\.md$"))))) #t))))) (propagated-inputs - `(("emacs-dash" ,emacs-dash) + `(("emacs-anaphora" ,emacs-anaphora) + ("emacs-dash" ,emacs-dash) ("emacs-s" ,emacs-s) ("emacs-ts" ,emacs-ts))) (home-page "https://github.com/contrapunctus-1/chronometrist") @@ -2113,7 +2159,7 @@ Its features are: (define-public emacs-direnv (package (name "emacs-direnv") - (version "2.0.0") + (version "2.1.0") (source (origin (method git-fetch) @@ -2122,8 +2168,7 @@ Its features are: (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 - "005ibyzsx1fdyrl5iyhqpb1bg83mphzahq7zvw58x00syyqi2z49")))) + (base32 "0xkqn4604k2imas6azy1www56br8ls4iv9a44pxcd8h94j1fp44d")))) (build-system emacs-build-system) (propagated-inputs `(("dash" ,emacs-dash) @@ -2435,13 +2480,30 @@ filters, new key bindings and faces. It can be enabled by (sha256 (base32 "0njgyx09q225hliacsnjk8wallg5i6xkz6bj501pb05nwqfbvfk7")))) (build-system emacs-build-system) + (inputs `(("djview" ,djview) + ("djvulibre" ,djvulibre))) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'configure + (lambda* (#:key inputs outputs #:allow-other-keys) + (let ((file "djvu.el") + (djview (assoc-ref inputs "djview")) + (djvulibre (assoc-ref inputs "djvulibre"))) + ;; Specify the absolute executable locations. + (chmod file #o644) + (substitute* file + (("\"djvused\"") (string-append "\"" djvulibre "/bin/djvused\"")) + (("\"djvm\"") (string-append "\"" djvulibre "/bin/djvm\"")) + (("\"ddjvu\"") (string-append "\"" djvulibre "/bin/ddjvu\""))) + (emacs-substitute-variables file + ("djvu-djview-command" (string-append djview "/bin/djview")))) + #t))))) (home-page "http://elpa.gnu.org/packages/djvu.html") (synopsis "Edit and view Djvu files via djvused") (description "This package is a front end for the command-line program djvused from -DjVuLibre, see @url{http://djvu.sourceforge.net/}. It assumes you have the -programs @command{djvused}, @command{djview}, @command{ddjvu}, and -@command{djvm} installed.") +DjVuLibre, see @url{http://djvu.sourceforge.net/}.") (license license:gpl3+))) (define-public emacs-pabbrev @@ -2469,78 +2531,86 @@ during idle time, while Emacs is doing nothing else.") (license license:gpl3+))) (define-public emacs-pdf-tools - (package - (name "emacs-pdf-tools") - (version "0.90") - (home-page "https://github.com/politza/pdf-tools") - (source (origin - (method git-fetch) - (uri (git-reference (url home-page) - (commit (string-append "v" version)))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "0iv2g5kd14zk3r5dzdw7b7hk4b5w7qpbilcqkja46jgxbb6xnpl9")))) - (build-system gnu-build-system) - (arguments - `(#:tests? #f ; there are no tests - #:modules ((guix build gnu-build-system) - ((guix build emacs-build-system) #:prefix emacs:) - (guix build utils) - (guix build emacs-utils)) - #:imported-modules (,@%gnu-build-system-modules - (guix build emacs-build-system) - (guix build emacs-utils)) - #:phases - (modify-phases %standard-phases - ;; Build server side using 'gnu-build-system'. - (add-after 'unpack 'enter-server-dir - (lambda _ (chdir "server") #t)) - (add-after 'enter-server-dir 'autogen - (lambda _ - (invoke "bash" "autogen.sh"))) + ;; XXX: Development branch fixes an incompatibility with Emacs 27+. See + ;; <https://github.com/politza/pdf-tools/issues/616>. + (let ((commit "c510442ab89c8a9e9881230eeb364f4663f59e76") + (revision "1")) + (package + (name "emacs-pdf-tools") + (version (git-version "0.90" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/politza/pdf-tools") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "17z3cpn76g9dp62drjrgrqpp1bgf4gl5k5gspylskpvd4kj4bq4d")))) + (build-system gnu-build-system) + (arguments + `(#:tests? #f ; there are no tests + #:modules ((guix build gnu-build-system) + ((guix build emacs-build-system) #:prefix emacs:) + (guix build utils) + (guix build emacs-utils)) + #:imported-modules (,@%gnu-build-system-modules + (guix build emacs-build-system) + (guix build emacs-utils)) + #:phases + (modify-phases %standard-phases + ;; Build server side using 'gnu-build-system'. + (add-after 'unpack 'enter-server-dir + (lambda _ (chdir "server") #t)) + (add-after 'enter-server-dir 'autogen + (lambda _ + (invoke "bash" "autogen.sh"))) - ;; Build emacs side using 'emacs-build-system'. - (add-after 'compress-documentation 'enter-lisp-dir - (lambda _ (chdir "../lisp") #t)) - (add-after 'enter-lisp-dir 'emacs-patch-variables - (lambda* (#:key outputs #:allow-other-keys) - (for-each make-file-writable (find-files ".")) + ;; Build emacs side using 'emacs-build-system'. + (add-after 'compress-documentation 'enter-lisp-dir + (lambda _ (chdir "../lisp") #t)) + (add-after 'enter-lisp-dir 'emacs-patch-variables + (lambda* (#:key outputs #:allow-other-keys) + (for-each make-file-writable (find-files ".")) - ;; Set path to epdfinfo program. - (emacs-substitute-variables "pdf-info.el" - ("pdf-info-epdfinfo-program" - (string-append (assoc-ref outputs "out") - "/bin/epdfinfo"))) - ;; Set 'pdf-tools-handle-upgrades' to nil to avoid "auto - ;; upgrading" that pdf-tools tries to perform. - (emacs-substitute-variables "pdf-tools.el" - ("pdf-tools-handle-upgrades" '())))) - (add-after 'emacs-patch-variables 'emacs-add-source-to-load-path - (assoc-ref emacs:%standard-phases 'add-source-to-load-path)) - (add-after 'emacs-add-source-to-load-path 'emacs-install - (assoc-ref emacs:%standard-phases 'install)) - (add-after 'emacs-install 'emacs-build - (assoc-ref emacs:%standard-phases 'build)) - (add-after 'emacs-install 'emacs-make-autoloads - (assoc-ref emacs:%standard-phases 'make-autoloads))))) - (native-inputs `(("autoconf" ,autoconf) - ("automake" ,automake) - ("pkg-config" ,pkg-config) - ("emacs" ,emacs-minimal))) - (inputs `(("poppler" ,poppler) - ("cairo" ,cairo) - ("glib" ,glib) - ("libpng" ,libpng) - ("zlib" ,zlib))) - (propagated-inputs `(("tablist" ,emacs-tablist))) - (synopsis "Emacs support library for PDF files") - (description - "PDF Tools is, among other things, a replacement of DocView for PDF + ;; Set path to epdfinfo program. + (emacs-substitute-variables "pdf-info.el" + ("pdf-info-epdfinfo-program" + (string-append (assoc-ref outputs "out") + "/bin/epdfinfo"))) + ;; Set 'pdf-tools-handle-upgrades' to nil to avoid "auto + ;; upgrading" that pdf-tools tries to perform. + (emacs-substitute-variables "pdf-tools.el" + ("pdf-tools-handle-upgrades" '())))) + (add-after 'emacs-patch-variables 'emacs-add-source-to-load-path + (assoc-ref emacs:%standard-phases 'add-source-to-load-path)) + (add-after 'emacs-add-source-to-load-path 'emacs-install + (assoc-ref emacs:%standard-phases 'install)) + (add-after 'emacs-install 'emacs-build + (assoc-ref emacs:%standard-phases 'build)) + (add-after 'emacs-install 'emacs-make-autoloads + (assoc-ref emacs:%standard-phases 'make-autoloads))))) + (native-inputs + `(("autoconf" ,autoconf) + ("automake" ,automake) + ("pkg-config" ,pkg-config) + ("emacs" ,emacs-minimal))) + (inputs + `(("poppler" ,poppler) + ("cairo" ,cairo) + ("glib" ,glib) + ("libpng" ,libpng) + ("zlib" ,zlib))) + (propagated-inputs + `(("tablist" ,emacs-tablist))) + (home-page "https://github.com/politza/pdf-tools") + (synopsis "Emacs support library for PDF files") + (description + "PDF Tools is, among other things, a replacement of DocView for PDF files. The key difference is that pages are not pre-rendered by e.g. ghostscript and stored in the file-system, but rather created on-demand and stored in memory.") - (license license:gpl3+))) + (license license:gpl3+)))) (define-public emacs-dash (package @@ -2989,7 +3059,7 @@ files and directories.") (define-public emacs-fountain-mode (package (name "emacs-fountain-mode") - (version "3.1.0") + (version "3.2.2") (source (origin (method git-fetch) @@ -2998,7 +3068,7 @@ files and directories.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "08giwg0jwk8zzj2i4cm08322qr6znrnv9a49za7c6j47bykpwj6s")))) + (base32 "0rwdwbw9cq8ljvbmgmz9izank8dqjki79l1bw127lli69fs72gyi")))) (build-system emacs-build-system) (home-page "https://github.com/rnkn/fountain-mode") (synopsis "Major mode for screenwriting in Fountain markup") @@ -3188,6 +3258,29 @@ project. This package also includes relevant snippets for yasnippet.") (license license:expat)))) +(define-public emacs-gdscript-mode + (package + (name "emacs-gdscript-mode") + (version "1.2.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/godotengine/emacs-gdscript-mode") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "02by4bvdayldbjlz6jkp36m5rgcy2h5bwhqx2cj7wma6xf6cw3lf")))) + (build-system emacs-build-system) + (home-page "https://github.com/godotengine/emacs-gdscript-mode") + (synopsis "GDScript support and syntax highlighting in Emacs") + (description + "This package adds support for the GDScript programming language from the +Godot game engine in Emacs. It features all the essentials, e.g., syntax +highlighting, code folding, indentation, automatic pairing, auto-completion, +and code formatting.") + (license license:gpl3+))) + (define-public emacs-el-mock (package (name "emacs-el-mock") @@ -3338,8 +3431,9 @@ keep pressing the key until it selects what you want. There's also ;; byte-compilation is finished #:parallel-tests? #f)) (home-page "https://github.com/lastquestion/explain-pause-mode") - (synopsis "Provides a top like interface to determine why Emacs paused") - (description "Monitors Emacs function calls and records their execution + (synopsis "Top-like interface to determine why Emacs paused") + (description + "This package monitors Emacs function calls and records their execution time. This information can be reviewed to determine what is causing the user interface to pause.") (license license:gpl3+)))) @@ -3501,7 +3595,6 @@ IRC bouncer with ERC.") (sha256 (base32 "1hwlhzgx03z8891sblz56zdp8zj0izh72kxykgcnz5rrkyc3vfi3")))) (build-system emacs-build-system) - (propagated-inputs `(("emacs-seq" ,emacs-seq))) (home-page "https://github.com/drewbarbs/erc-status-sidebar") (synopsis "Hexchat-like activity overview for ERC channels") (description @@ -6460,7 +6553,7 @@ regexp that matches all known keywords.") (define-public emacs-perspective (package (name "emacs-perspective") - (version "2.10") + (version "2.11") (source (origin (method git-fetch) @@ -6470,7 +6563,7 @@ regexp that matches all known keywords.") (file-name (git-file-name name version)) (sha256 (base32 - "1xfcm69nd6f9chwlqfz5vd8nnyl5mwharxjrn1m515568dqrk62x")))) + "0nka5z6226r174ligja023qx2bb1pfyjbanafxprbyxkr17b2794")))) (build-system emacs-build-system) (arguments `(#:tests? #t @@ -7183,7 +7276,17 @@ allowing unprefixed keys to insert their respective characters as expected.") ("emacs-s" ,emacs-s))) (arguments `(#:tests? #t - #:test-command '("buttercup"))) + #:test-command '("buttercup") + #:phases + (modify-phases %standard-phases + (add-before 'check 'fix-tests + ;; See: https://github.com/clojure-emacs/clojure-mode/issues/568 + (lambda _ + (substitute* "clojure-mode.el" + (("\\(list \\(cdr project\\)\\)" line) + (string-append "\"Return the list of directory roots of the PROJECT.\"\n" + line))) + #t))))) (home-page "https://github.com/clojure-emacs/clojure-mode") (synopsis "Major mode for Clojure code") (description @@ -7510,31 +7613,33 @@ to all the other commands, too.") (license license:gpl3+))) (define-public emacs-js2-mode - (package - (name "emacs-js2-mode") - (version "20190219") - (source - (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/mooz/js2-mode") - (commit version))) - (file-name (git-file-name name version)) - (sha256 - (base32 "0766bbr4piia9vfr4ivd2gwi8dxah654adv6h28ylz4q8xmfzm1b")))) - (build-system emacs-build-system) - (arguments - `(#:tests? #t - #:test-command '("make" "test"))) - (home-page "https://github.com/mooz/js2-mode/") - (synopsis "Improved JavaScript editing mode for Emacs") - (description - "Js2-mode provides a JavaScript major mode for Emacs that is more + (let ((commit "40aab27581279d0fdbfeb9afeb85f39d401a927f") + (revision "1")) + (package + (name "emacs-js2-mode") + (version (git-version "20190219" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/mooz/js2-mode") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0ysd0ji3vvk2zpjcg1wl7b2hva8471vq0ypib4h6spnpjdr43vzk")))) + (build-system emacs-build-system) + (arguments + `(#:tests? #t + #:test-command '("make" "test"))) + (home-page "https://github.com/mooz/js2-mode/") + (synopsis "Improved JavaScript editing mode for Emacs") + (description + "Js2-mode provides a JavaScript major mode for Emacs that is more advanced than the built-in javascript-mode. Features include accurate syntax highlighting using a recursive-descent parser, on-the-fly reporting of syntax errors and strict-mode warnings, smart line-wrapping within comments and strings, and code folding.") - (license license:gpl3+))) + (license license:gpl3+)))) (define-public emacs-nodejs-repl (package @@ -8449,7 +8554,7 @@ ack, ag, helm and pt.") (define-public emacs-helm (package (name "emacs-helm") - (version "3.6.4") + (version "3.6.5") (source (origin (method git-fetch) @@ -8458,7 +8563,7 @@ ack, ag, helm and pt.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "0cl5awhq5py872qx9s30sfgfpfwjivwbsi18mgar8lj6lvs4s8zz")))) + (base32 "0yzpb84346v42ig4h0rsnvzmln58ilhc0gsq0ggc7038ypqkdw4d")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-async" ,emacs-async) @@ -8679,7 +8784,7 @@ target will call @code{compile} on it.") (define-public emacs-cider (package (name "emacs-cider") - (version "0.26.0") + (version "0.26.1") (source (origin (method git-fetch) @@ -8688,7 +8793,7 @@ target will call @code{compile} on it.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "1qwizvmm9ln75ph1jg2rfqv3hd9p4zaz8kp2i6yr3vq99c3a00i7")))) + (base32 "0m77jbxl380dp1wyj12m82bb06r80js8yxl530ryp1mwvy74f00d")))) (build-system emacs-build-system) (arguments '(#:exclude ;don't exclude 'cider-test.el' @@ -8719,9 +8824,9 @@ CIDER).") ;; There hasn't been a tag or release since 2016, so we take the latest ;; commit. (define-public emacs-sly - (let ((commit "6a2f543cb21f14104c2253af5a1427b884a987ae") + (let ((commit "8e22c1f62667434ec1acd1e0c6b7ec1c22dc0958") ;; Update together with sbcl-slynk-boot0. - (revision "5")) + (revision "6")) (package (name "emacs-sly") (version (git-version "1.0.0" revision commit)) @@ -8734,7 +8839,7 @@ CIDER).") (file-name (git-file-name name version)) (sha256 (base32 - "0wbpg9p9yg2hd62l15pvy50fk3hndq5zzyqlyyf04g368s895144")))) + "09wyqixsn7k889i54amf8bwjg6iyirp89xmcrgfwal010kh1ixcl")))) (build-system emacs-build-system) (native-inputs `(("texinfo" ,texinfo))) @@ -8890,8 +8995,8 @@ file.") (license license:gpl3+)))) (define-public emacs-sly-macrostep - (let ((commit "be2d24545092d164be1a91031d8881afd29c9ec0") - (revision "1")) + (let ((commit "5113e4e926cd752b1d0bcc1508b3ebad5def5fad") + (revision "2")) (package (name "emacs-sly-macrostep") (version (git-version "0.1" revision commit)) @@ -8905,7 +9010,7 @@ file.") (file-name (git-file-name name version)) (sha256 (base32 - "0v8m3zkccpqd2l8m9340y672l2mm3mrry8422nva5kfvpcwdayqb")))) + "1nxf28gn4f3n0wnv7nb5sgl36fz175y470zs9hig4kq8cp0yal0r")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-sly" ,emacs-sly) @@ -9572,13 +9677,13 @@ passive voice.") (name "emacs-org") ;; emacs-org-contrib inherits from this package. Please update it as ;; well. - (version "9.3.6") + (version "9.3.8") (source (origin (method url-fetch) (uri (string-append "https://elpa.gnu.org/packages/org-" version ".tar")) (sha256 - (base32 "0jwpgfzjvf1hd3mx582pw86hysdryaqzp69hk6azi9kmq4bzk87d")))) + (base32 "1az00pi9rw3ibx4061jyqr6ll27kvs99yvd7nk5dckjh0ajd0gni")))) (build-system emacs-build-system) (arguments `(#:phases @@ -9603,14 +9708,14 @@ programming and reproducible research.") (package (inherit emacs-org) (name "emacs-org-contrib") - (version "20200213") + (version "20200907") (source (origin (method url-fetch) (uri (string-append "https://orgmode.org/elpa/" "org-plus-contrib-" version ".tar")) (sha256 - (base32 "0g6rrrwplrifz4ip0jg638m4kvpvdg03hwnyghd813w0lm935mh5")))) + (base32 "1rgk3pwhsmbmwlncg60ahwrrkm1ks4xpwy2wzv9q7myl1aihjj54")))) (arguments `(#:modules ((guix build emacs-build-system) (guix build utils) @@ -9646,6 +9751,29 @@ lists, and project planning with a fast and effective plain-text system. This package is equivalent to org-plus-contrib, but only includes additional files that you would find in @file{contrib/} from the git repository."))) +(define-public emacs-org-edna + (package + (name "emacs-org-edna") + (version "1.1.2") + (source (origin + (method bzr-fetch) + (uri (bzr-reference + (url "bzr://bzr.savannah.nongnu.org/org-edna-el") + (revision version))) + (file-name (string-append name "-" version "-checkout")) + (sha256 + (base32 + "01dblddgx0yid5hrgl4swbr4grhv057kfbdy122wihzqpsrgq86n")))) + (build-system emacs-build-system) + (home-page "https://savannah.nongnu.org/projects/org-edna-el/") + (synopsis "Manage Org task dependencies") + (description "This package provides an extensible means of specifying +conditions which must be fulfilled before a task can be completed and actions +to take once it is. Org Edna runs when either the BLOCKER or TRIGGER +properties are set on a heading, and when it is changing from a TODO state to +a DONE state.") + (license license:gpl3+))) + (define-public emacs-flx (package (name "emacs-flx") @@ -11864,7 +11992,7 @@ or @code{treemacs}, but leveraging @code{Dired} to do the job of display.") (define-public emacs-which-key (package (name "emacs-which-key") - (version "3.4.0") + (version "3.5.0") (source (origin (method git-fetch) @@ -11873,7 +12001,7 @@ or @code{treemacs}, but leveraging @code{Dired} to do the job of display.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "1ahgb7dqdc75farkl0fg0a6hvx2067gdvjq99cd3z2dz56km0p05")))) + (base32 "13lgjsm9pwgjsxg7lzc1c9sw2bzssxikfj6grnshqfll8kz8yr4r")))) (build-system emacs-build-system) (arguments `(#:tests? #t @@ -12453,14 +12581,14 @@ write applications that use WebSockets, and is not useful by itself.") (define-public emacs-oauth2 (package (name "emacs-oauth2") - (version "0.13") + (version "0.15") (source (origin (method url-fetch) (uri (string-append "https://elpa.gnu.org/packages/" "oauth2-" version ".el")) (sha256 - (base32 "0y5nbdwxz2hfr09xgsqgyv60vgx0rsaisibcpkz00klvgg26w33r")))) + (base32 "0ij17g6i8d4cyzc8v6sy2qglwhzd767331gavll6d507krdh3ca3")))) (build-system emacs-build-system) (home-page "https://elpa.gnu.org/packages/oauth2.html") (synopsis "OAuth 2.0 authorization protocol implementation") @@ -12474,6 +12602,28 @@ needs to be refreshed, the code handles it automatically and stores the new value of the access token.") (license license:gpl3+))) +(define-public emacs-auth-source-xoauth2 + (package + (name "emacs-auth-source-xoauth2") + (version "1.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/ccrusius/auth-source-xoauth2") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0nl859csl8xcd6ybpjj15ph8l8fxwkwf45kbylss68alkyf1rl3v")))) + (build-system emacs-build-system) + (home-page "https://github.com/ccrusius/auth-source-xoauth2") + (synopsis "XOAuth2 authentication capabilities for Emacs auth-source") + (description + "This package adds XOAuth2 authentication capabilities to Emacs +auth-source. This integration requires some preliminary work on the users’ +part, which includes creating tokens.") + (license license:asl2.0))) + (define-public emacs-circe (package (name "emacs-circe") @@ -13521,8 +13671,7 @@ and can be consulted and modified.") ("emacs-dash" ,emacs-dash) ("emacs-flycheck" ,emacs-flycheck) ("emacs-let-alist" ,emacs-let-alist) - ("emacs-s" ,emacs-s) - ("emacs-seq" ,emacs-seq))) + ("emacs-s" ,emacs-s))) (home-page "https://github.com/purescript-emacs/psc-ide-emacs") (synopsis "Emacs integration for PureScript's psc-ide tool") (description @@ -14282,8 +14431,7 @@ with (La)TeX mode, Org mode and other Emacs editing modes.") (base32 "1gxjind6r235az59dr8liv03d8994mqb8a7m28j3c12q7p70aziz")))) (build-system emacs-build-system) (propagated-inputs - `(("emacs-seq" ,emacs-seq) - ("emacs-dash" ,emacs-dash) + `(("emacs-dash" ,emacs-dash) ("emacs-let-alist" ,emacs-let-alist))) (home-page "https://github.com/cpitclaudel/biblio.el") (synopsis "Browse and import bibliographic references") @@ -14691,24 +14839,6 @@ timestamps and date-time format strings library for Emacs.") "@code{npm-mode} provides a minor mode to work with @code{npm} projects.") (license license:gpl3+))) -(define-public emacs-seq - (package - (name "emacs-seq") - (version "2.20") - (source - (origin - (method url-fetch) - (uri (string-append "https://elpa.gnu.org/packages/seq-" version ".tar")) - (sha256 - (base32 - "0vrpx6nnyjb0gsypknzagimlhvcvi5y1rcdkpxyqr42415zr8d0n")))) - (build-system emacs-build-system) - (home-page "https://elpa.gnu.org/packages/seq.html") - (synopsis "Sequence manipulation functions") - (description "Sequence-manipulation functions that complement basic -functions provided by @file{subr.el}.") - (license license:gpl3+))) - (define-public emacs-itail (let ((commit "6e43c20da03be3b9c6ece93b7dc3495975ec1888") (revision "1")) @@ -14788,7 +14918,17 @@ continue.") ("emacs-undercover" ,emacs-undercover))) (arguments `(#:tests? #t - #:test-command '("ert-runner"))) + #:test-command '("ert-runner") + #:phases + (modify-phases %standard-phases + (add-before 'check 'disable-refs-next-match-test + ;; Hack to disable the failing test for emacs27 + ;; https://github.com/Wilfred/elisp-refs/issues/29 + (lambda _ + (substitute* "test/unit-test.el" + (("ert-deftest elisp-refs-next-match") + "defun elisp-refs-next-match")) + #t))))) (home-page "https://github.com/Wilfred/elisp-refs") (synopsis "Find callers of elisp functions or macros") (description "Find references to functions, macros or variables. Unlike a @@ -14895,36 +15035,36 @@ macro takes a first argument (whose value must be an alist) and a body.") (license license:gpl3+))) (define-public emacs-esup - (package - (name "emacs-esup") - (version "0.7") - (source - (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/jschaf/esup") - (commit (string-append "v" version)))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "100w28n3qb3s5b18vvqpwmijdjnjazawn38i0pjbpxz5llhqgl1g")))) - (build-system emacs-build-system) - (native-inputs - `(("emacs-noflet" ,emacs-noflet) - ("emacs-el-mock" ,emacs-el-mock))) - (arguments - `(#:phases - (modify-phases %standard-phases - (add-before 'install 'check - (lambda* (#:key inputs #:allow-other-keys) - (invoke "emacs" "--batch" "-L" "." - "-l" "test/esup-test.el" - "-f" "ert-run-tests-batch-and-exit")))))) - (home-page "https://github.com/jschaf/esup") - (synopsis "Emacs start up profiler") - (description "Benchmark Emacs Startup time without ever leaving + (let ((commit "0de8af8233d9ce1b67f05a50f25c481c4f1118d8") + (revision "1")) + (package + (name "emacs-esup") + (version (git-version "0.7.1" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/jschaf/esup") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "01khb3xyj0ylwib6ryzzvqmkh5wvzxiq2n3l0s3h9zv7wx849bzv")))) + (build-system emacs-build-system) + (native-inputs + `(("emacs-noflet" ,emacs-noflet) + ("emacs-undercover" ,emacs-undercover) + ("emacs-buttercup" ,emacs-buttercup))) + (propagated-inputs + `(("emacs-dash" ,emacs-dash))) + (arguments + `(#:tests? #t + #:test-command '("buttercup" "-L" "."))) + (home-page "https://github.com/jschaf/esup") + (synopsis "Emacs start up profiler") + (description "Benchmark Emacs Startup time without ever leaving your Emacs.") - (license license:gpl2+))) + (license license:gpl2+)))) (define-public emacs-restart-emacs (let ((commit "9aa90d3df9e08bc420e1c9845ee3ff568e911bd9") @@ -16531,35 +16671,33 @@ scroll up to read the function name and then scroll down to original position.") (license license:gpl3+)))) (define-public emacs-git-auto-commit-mode - (let ((commit "23abaff792c0459e51e596d3fecd5513617e8cb1") - (revision "1")) - (package - (name "emacs-git-auto-commit-mode") - (version (git-version "4.6.0" revision commit)) - (source - (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/ryuslash/git-auto-commit-mode") - (commit commit))) - (file-name (git-file-name name version)) - (sha256 - (base32 "0hqj34q8z4jg86zz2lwfvj6xk07b4g1222h9y1zqs83qgivwpk1l")))) - (build-system emacs-build-system) - (native-inputs - `(("emacs-buttercup" ,emacs-buttercup) - ("git" ,git))) - (arguments - `(#:tests? #t - #:test-command '("buttercup" "-L" "."))) - (home-page "https://github.com/ryuslash/git-auto-commit-mode") - (synopsis "Emacs Minor mode to automatically commit and push") - (description "@code{git-auto-commit-mode} is an Emacs minor mode that + (package + (name "emacs-git-auto-commit-mode") + (version "4.7.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/ryuslash/git-auto-commit-mode") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0gpib57f7xza04g3iyihw5v15hb7pncqsmvyggib902yvcxlkvqf")))) + (build-system emacs-build-system) + (native-inputs + `(("emacs-buttercup" ,emacs-buttercup) + ("git" ,git))) + (arguments + `(#:tests? #t + #:test-command '("buttercup" "-L" "."))) + (home-page "https://github.com/ryuslash/git-auto-commit-mode") + (synopsis "Emacs Minor mode to automatically commit and push") + (description "@code{git-auto-commit-mode} is an Emacs minor mode that tries to commit changes to a file after every save. -When @code{gac-automatically-push-p} is non-nil, it also tries to push to -the current upstream.") - (license license:gpl3+)))) +When @code{gac-automatically-push-p} is non-nil, it also tries to push to the +current upstream.") + (license license:gpl3+))) (define-public emacs-scroll-on-drag (let ((commit "888abd04c34753b1fc4b2fe541bc004ebec5c996") @@ -18324,7 +18462,7 @@ can be queued at any time.") ("emacs-esxml" ,emacs-esxml) ("emacs-s" ,emacs-s))) (inputs - `(("pandoc" ,ghc-pandoc))) + `(("pandoc" ,pandoc))) (arguments `(#:phases (modify-phases %standard-phases @@ -20411,7 +20549,6 @@ unescaping of quotes.") (build-system emacs-build-system) (propagated-inputs `(("emacs-dash" ,emacs-dash) - ("emacs-seq" ,emacs-seq) ("emacs-flycheck" ,emacs-flycheck) ("emacs-haskell-mode" ,emacs-haskell-mode) ("emacs-let-alist" ,emacs-let-alist))) @@ -21110,7 +21247,7 @@ through Dash docsets.") (define-public emacs-calibredb (package (name "emacs-calibredb") - (version "2.5.0") + (version "2.6.0") (source (origin (method git-fetch) @@ -21119,11 +21256,10 @@ through Dash docsets.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "11m9d015fnjf89qg6wpy0vs1vhvak5q753m4dzqrdw3jgm9zsnmv")))) + (base32 "132afbbh4km2cbll46i6bpksvin0ncgfy782g4nkfjmwjaqh3d5l")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-dash" ,emacs-dash) - ("emacs-org" ,emacs-org) ("emacs-s" ,emacs-s) ("emacs-transient" ,emacs-transient))) (home-page "https://github.com/chenyanming/calibredb.el") @@ -21232,14 +21368,14 @@ well as an option for visually flashing evaluated s-expressions.") (define-public emacs-tramp (package (name "emacs-tramp") - (version "2.4.4.1") + (version "2.4.4.2") (source (origin (method url-fetch) (uri (string-append "https://elpa.gnu.org/packages/" "tramp-" version ".tar")) (sha256 - (base32 "0jayd75yscaqvg6y0m6g2mgbjswyj5gqdij2az9g0j18vm5vbqy3")))) + (base32 "16c8x5d803hjql0z88lidyx3zrhxlpjphdpzn3ppzz3wrsxsv8rf")))) (build-system emacs-build-system) (arguments `(#:emacs ,emacs ;need D-Bus @@ -21873,7 +22009,7 @@ format.") "0iibxplgdp34bpq1yll2gmqjd8d8lnqn4mqjvx6cdf0y438yr4jz")))) (build-system emacs-build-system) (inputs - `(("pandoc" ,ghc-pandoc))) + `(("pandoc" ,pandoc))) (propagated-inputs `(("emacs-dash" ,emacs-dash) ("emacs-ht" ,emacs-ht))) @@ -21942,14 +22078,14 @@ federated microblogging social network.") (define-public emacs-ebdb (package (name "emacs-ebdb") - (version "0.6.18") + (version "0.6.19") (source (origin (method url-fetch) (uri (string-append "https://elpa.gnu.org/packages/" "ebdb-" version ".tar")) (sha256 - (base32 "0znbv3c7wdgak1f1zb051vg4r29fksqh53k1j77jfmqcvwkpz2mw")))) + (base32 "0ch5vzhxa8h5v75lg3blsmrln497lr3ylivx6w28aiyb6cv5016l")))) (build-system emacs-build-system) (home-page "https://github.com/girzel/ebdb") (synopsis "EIEIO port of BBDB, Emacs's contact-management package") @@ -22270,14 +22406,14 @@ Emacs that integrate with major modes like Org-mode.") (define-public emacs-modus-operandi-theme (package (name "emacs-modus-operandi-theme") - (version "0.11.0") + (version "0.12.0") (source (origin (method url-fetch) (uri (string-append "https://elpa.gnu.org/packages/" "modus-operandi-theme-" version ".el")) (sha256 - (base32 "11sq105vpp8rmyayfb7h8gz099kfdr7nb8n4pg81iby4fllj1kgd")))) + (base32 "1mllyysn701qfnglxs7n2f6mrzrz55v9hcwspvafc6fl2blr393y")))) (build-system emacs-build-system) (home-page "https://gitlab.com/protesilaos/modus-themes") (synopsis "Accessible light theme (WCAG AAA)") @@ -22291,14 +22427,14 @@ standard. This is the highest standard of its kind.") (define-public emacs-modus-vivendi-theme (package (name "emacs-modus-vivendi-theme") - (version "0.11.0") + (version "0.12.0") (source (origin (method url-fetch) (uri (string-append "https://elpa.gnu.org/packages/" "modus-vivendi-theme-" version ".el")) (sha256 - (base32 "14ky9cxg9cpvhgg24ra0xla2dapqjlf948470q7v0m402x1r2iif")))) + (base32 "01f6z5xjnmki1k9m83jwva42lxidb31pdpwm4wpxjzxqmb96picn")))) (build-system emacs-build-system) (home-page "https://gitlab.com/protesilaos/modus-themes") (synopsis "Accessible dark theme (WCAG AAA)") @@ -22569,7 +22705,7 @@ Google guidelines.") (define-public emacs-helm-fish-completion (package (name "emacs-helm-fish-completion") - (version "0.5") + (version "0.6") (home-page "https://github.com/emacs-helm/helm-fish-completion") (source (origin @@ -22579,7 +22715,7 @@ Google guidelines.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "0hpsm39kx8vpz2zmarjrkvy1capkk5lwpsmdg2xnklsck6xsn922")))) + (base32 "1j2vfngq3512naaayv9kx0d1q2zg1xgs69l8afc7swg72h0l0imw")))) (build-system emacs-build-system) (propagated-inputs `(("helm" ,emacs-helm) @@ -24349,3 +24485,94 @@ applying highlighting to any face in GNU Emacs. The functionality of this library depends on overlays, which by default are not picked up when copy-pasting text from buffer to buffer.") (license license:gpl2+)))) + +(define-public emacs-org-webring + (package + (name "emacs-org-webring") + (version "1.6") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://git.sr.ht/~brettgilio/org-webring") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "00d7jqsbfa08rhyv3ry87rgy9ikv233spn4rz0d3riy0bp7b7j6b")))) + (build-system emacs-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'install 'install-assets + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (assets + (string-append out "/share/emacs/org-webring-assets"))) + (mkdir-p assets) + (copy-recursively "assets" assets) + #t)))))) + (propagated-inputs + `(("emacs-xmlgen" ,emacs-xmlgen))) + (home-page "https://sr.ht/~brettgilio/org-webring") + (synopsis "Generate webrings for Org-based sites / blogs") + (description "Org-webring is an alternative implementation of a +feed-based webring, taking inspiration from openring by Drew DeVault. +Intended to integrate with Org-based websites and blogs (either +directly, or indirectly, as in ox-hugo), it will fetch a given list of +web feed files and correctly parse and format the elements to be +displayed for sharing.") + (license license:gpl3+))) + +(define-public emacs-scpaste + (let ((commit "cd4fa0aafecd839736e0b6cba68b4fc4d7045472") + (revision "0")) + (package + (name "emacs-scpaste") + (version "0.6.5") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://git.sr.ht/~technomancy/scpaste") + (commit commit))) + (file-name (git-file-name name commit)) + (sha256 + (base32 + "1nvwbwl26z03963g9c82b3ggm39r95z1vp7c9qsa9mjm46dyq27w")))) + (build-system emacs-build-system) + (propagated-inputs + `(("emacs-htmlize" ,emacs-htmlize))) + (home-page "https://git.sr.ht/~technomancy/scpaste") + (synopsis "Emacs-based static HTML pastebin") + (description "This library will place an HTML copy of a +buffer on an active webserver to which the user has SSH access. +It is similar in purpose to services such as Gist or Pastebin, +but is much simpler since it assumes the user has access to a +publically-accessible HTTP server.") + (license license:gpl3+)))) + +(define-public emacs-company-reftex + (package + (name "emacs-company-reftex") + (version "0.1.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/TheBB/company-reftex") + (commit "275ef708f08d3bf0eb30632148e5c6184eeaacdb"))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "118cgw5lsffqdqz95mnkw36mmnsbg9m52r2np4m7v14mjjwr9fby")))) + (build-system emacs-build-system) + (propagated-inputs + `(("emacs-company" ,emacs-company) + ("emacs-s" ,emacs-s))) + (home-page "https://github.com/TheBB/company-reftex") + (synopsis "RefTeX backends for company-mode") + (description "This package provides company-mode backends for completing +label references and citations in LaTeX. It is based on RefTeX, which is +included with Emacs.") + (license license:gpl3+))) diff --git a/gnu/packages/emacs.scm b/gnu/packages/emacs.scm index ad8d4b0606..03c28ee7a7 100644 --- a/gnu/packages/emacs.scm +++ b/gnu/packages/emacs.scm @@ -2,7 +2,7 @@ ;;; Copyright © 2013, 2014, 2015, 2016, 2017, 2019 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2013 Andreas Enge <andreas@enge.fr> ;;; Copyright © 2014 Taylan Ulrich Bayirli/Kammer <taylanbayirli@gmail.com> -;;; Copyright © 2014, 2015, 2016, 2017, 2018, 2019 Mark H Weaver <mhw@netris.org> +;;; Copyright © 2014, 2015, 2016, 2017, 2018, 2019, 2020 Mark H Weaver <mhw@netris.org> ;;; Copyright © 2014, 2015, 2016, 2017 Alex Kost <alezost@gmail.com> ;;; Copyright © 2016, 2018 Arun Isaac <arunisaac@systemreboot.net> ;;; Copyright © 2016 Federico Beffa <beffa@fbengineering.ch> @@ -21,6 +21,7 @@ ;;; Copyright © 2019 Leo Prikler <leo.prikler@student.tugraz.at> ;;; Copyright © 2019 Amin Bandali <bandali@gnu.org> ;;; Copyright © 2020 Jack Hill <jackhill@jackhill.us> +;;; Copyright © 2020 Morgan Smith <Morgan.J.Smith@outlook.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -61,6 +62,7 @@ #:use-module (gnu packages imagemagick) #:use-module (gnu packages linux) ; alsa-lib #:use-module (gnu packages mail) ; for mailutils + #:use-module (gnu packages multiprecision) #:use-module (gnu packages ncurses) #:use-module (gnu packages pkg-config) #:use-module (gnu packages texinfo) @@ -75,14 +77,14 @@ (define-public emacs (package (name "emacs") - (version "26.3") + (version "27.1") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/emacs/emacs-" version ".tar.xz")) (sha256 (base32 - "119ldpk7sgn9jlpyngv5y4z3i7bb8q3xp4p0qqi7i5nq39syd42d")) + "0h9f2wpmp6rb5rfwvqwv1ia1nw86h74p7hnz3vb3gjazj67i4k2a")) (patches (search-patches "emacs-exec-path.patch" "emacs-fix-scheme-indent-function.patch" "emacs-ignore-empty-xim-styles.patch" @@ -95,15 +97,7 @@ (for-each delete-file (append (find-files "." "\\.elc$") (find-files "." "loaddefs\\.el$") - ;; This is the only "autoloads" file that - ;; does not have "*loaddefs.el" name. - ;; TODO: Next time changing this package, - ;; replace the following with a call to - ;; `find-files', so that `delete-file' - ;; wouldn't error out when the file is - ;; missing, making the entire snippet field - ;; reusable as-is for `emacs-next' below. - '("eshell/esh-groups.el"))) + (find-files "eshell" "^esh-groups\\.el$"))) ;; Make sure Tramp looks for binaries in the right places on ;; remote Guix System machines, where 'getconf PATH' returns @@ -130,6 +124,7 @@ (arguments `(#:tests? #f ; no check target #:configure-flags (list "--with-modules" + "--with-cairo" "--disable-build-details") #:phases (modify-phases %standard-phases @@ -156,7 +151,7 @@ (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (lisp-dir (string-append out "/share/emacs/site-lisp")) - (emacs (string-append out "/bin/emacs"))) + (emacs (string-append out "/bin/emacs"))) ;; This is duplicated from emacs-utils to prevent coupling. (define* (emacs-byte-compile-directory dir) @@ -180,7 +175,42 @@ ;; which leads to conflicts. (delete-file (string-append lisp-dir "/subdirs.el")) ;; Byte compile the site-start files. - (emacs-byte-compile-directory lisp-dir))))))) + (emacs-byte-compile-directory lisp-dir)) + #t)) + (add-after 'glib-or-gtk-wrap 'restore-emacs-pdmp + ;; restore the dump file that Emacs installs somewhere in + ;; libexec/ to its original state + (lambda* (#:key outputs target #:allow-other-keys) + (let* ((libexec (string-append (assoc-ref outputs "out") + "/libexec")) + ;; each of these find-files should return one file + (pdmp (find-files libexec "^emacs\\.pdmp$")) + (pdmp-real (find-files libexec + "^\\.emacs\\.pdmp-real$"))) + (for-each (lambda (wrapper real) + (delete-file wrapper) + (rename-file real wrapper)) + pdmp pdmp-real)) + #t)) + (add-after 'glib-or-gtk-wrap 'strip-double-wrap + (lambda* (#:key outputs #:allow-other-keys) + ;; Directly copy emacs-X.Y to emacs, so that it is not wrapped + ;; twice. This also fixes a minor issue, where WMs would not be + ;; able to track emacs back to emacs.desktop. + (with-directory-excursion (assoc-ref outputs "out") + (copy-file (string-append + "bin/emacs-" + ,(version-major+minor (package-version emacs))) + "bin/emacs") + #t))) + (add-before 'reset-gzip-timestamps 'make-compressed-files-writable + ;; The 'reset-gzip-timestamps phase will throw a permission error + ;; if gzip files aren't writable then. This phase is needed when + ;; building from a git checkout. + (lambda _ + (for-each make-file-writable + (find-files %output ".*\\.t?gz$")) + #t))))) (inputs `(("gnutls" ,gnutls) ("ncurses" ,ncurses) @@ -192,12 +222,16 @@ ;; TODO: Add the optional dependencies. ("libx11" ,libx11) ("gtk+" ,gtk+) + ("cairo" ,cairo) + ("pango" ,pango) + ("harfbuzz" ,harfbuzz) ("libxft" ,libxft) ("libtiff" ,libtiff) ("giflib" ,giflib) ("libjpeg" ,libjpeg-turbo) - ("imagemagick" ,imagemagick) ("acl" ,acl) + ("jansson" ,jansson) + ("gmp" ,gmp) ;; When looking for libpng `configure' links with `-lpng -lz', so we ;; must also provide zlib as an input. @@ -244,118 +278,57 @@ languages.") (license license:gpl3+))) (define-public emacs-next - (let ((commit "c36c5a3dedbb2e0349be1b6c3b7567ea7b594f1c") + (let ((commit "2ea34662c20f71d35dd52a5ed996542c7386b9cb") (revision "0") - (emacs-version "27.0.91")) - (package - (inherit emacs) + (emacs-version "28.0.50.1")) + (package/inherit emacs (name "emacs-next") (version (git-version emacs-version revision commit)) (source (origin + (inherit (package-source emacs)) (method git-fetch) (uri (git-reference - (url "https://git.savannah.gnu.org/git/emacs.git") + (url "https://git.savannah.gnu.org/git/emacs.git/") (commit commit))) - (sha256 - (base32 "0mlrg2npy1r79laahkgzhxd1qassfcdz8qk1cpw7mqgf6y5x505h")) (file-name (git-file-name name version)) - (patches (search-patches "emacs27-exec-path.patch" - "emacs-fix-scheme-indent-function.patch" - "emacs-ignore-empty-xim-styles.patch" - "emacs-source-date-epoch.patch")) - (modules (origin-modules (package-source emacs))) - ;; TODO: once the snippet for `emacs' is changed to not fail when - ;; eshell/esh-groups.el does not exist, replace this snippet with - ;; (snippet (origin-snippet (package-source emacs))))). - (snippet - '(with-directory-excursion "lisp" - ;; Make sure Tramp looks for binaries in the right places on - ;; remote Guix System machines, where 'getconf PATH' returns - ;; something bogus. - (substitute* "net/tramp-sh.el" - ;; Patch the line after "(defcustom tramp-remote-path". - (("\\(tramp-default-remote-path") - (format #f "(tramp-default-remote-path ~s ~s ~s ~s " - "~/.guix-profile/bin" "~/.guix-profile/sbin" - "/run/current-system/profile/bin" - "/run/current-system/profile/sbin"))) - - ;; Make sure Man looks for C header files in the right - ;; places. - (substitute* "man.el" - (("\"/usr/local/include\"" line) - (string-join - (list line - "\"~/.guix-profile/include\"" - "\"/var/guix/profiles/system/profile/include\"") - " "))) - #t)))) + (sha256 + (base32 + "0igjm9kwiswn2dpiy2k9xikbdfc7njs07ry48fqz70anljj8y7y3")))) (arguments (substitute-keyword-arguments (package-arguments emacs) - ((#:configure-flags flags) - `(cons* "--with-harfbuzz" ,flags)) ((#:phases phases) `(modify-phases ,phases - ;; The 'reset-gzip-timestamps phase will throw a - ;; permission error if gzip files aren't writable then - (add-before - 'reset-gzip-timestamps - 'make-compressed-files-writable - (lambda _ - (for-each make-file-writable - (find-files %output ".*\\.t?gz$")) - #t)) - ;; restore the dump file that Emacs installs somewhere in - ;; libexec/ to its original state - (add-after 'glib-or-gtk-wrap 'restore-emacs-pdmp - (lambda* (#:key outputs target #:allow-other-keys) - (let* ((libexec (string-append (assoc-ref outputs "out") - "/libexec")) - ;; each of these find-files should return one file - (pdmp (find-files libexec "^emacs\\.pdmp$")) - (pdmp-real (find-files libexec - "^\\.emacs\\.pdmp-real$"))) - (for-each (lambda (wrapper real) - (delete-file wrapper) - (rename-file real wrapper)) - pdmp pdmp-real) + (replace 'strip-double-wrap + (lambda* (#:key outputs #:allow-other-keys) + ;; Directly copy emacs-X.Y to emacs, so that it is not wrapped + ;; twice. This also fixes a minor issue, where WMs would not be + ;; able to track emacs back to emacs.desktop. + (with-directory-excursion (assoc-ref outputs "out") + (copy-file (string-append + "bin/emacs-" + ,(version-major+minor+point (package-version emacs-next))) + "bin/emacs") #t))))))) - (inputs - `(("jansson" ,jansson) - ("harfbuzz" ,harfbuzz) - ;; Emacs no longer uses ImageMagick by default - ;; https://git.savannah.gnu.org/cgit/emacs.git/tree/etc/NEWS?h=emacs-27.0.91&id=c36c5a3dedbb2e0349be1b6c3b7567ea7b594f1c#n102 - ,@(alist-delete "imagemagick" (package-inputs emacs)))) (native-inputs - `(("autoconf" ,autoconf) ; needed when building from trunk - ,@(package-native-inputs emacs))) - - ;; TODO: consider changing `emacs' to use a more robust way of - ;; specifying version for "EMACSLOADPATH", so as to avoid having to - ;; duplicate native-search-paths here. - (native-search-paths - (list (search-path-specification - (variable "EMACSLOADPATH") - ;; The versioned entry is for the Emacs' builtin libraries. - (files - (list "share/emacs/site-lisp" - (string-append "share/emacs/" emacs-version "/lisp")))) - (search-path-specification - (variable "INFOPATH") - (files '("share/info")))))))) + `(("autoconf" ,autoconf) + ,@(package-native-inputs emacs)))))) (define-public emacs-minimal ;; This is the version that you should use as an input to packages that just ;; need to byte-compile .el files. - (package (inherit emacs) + (package/inherit emacs (name "emacs-minimal") (synopsis "The extensible text editor (used only for byte-compilation)") (build-system gnu-build-system) (arguments (substitute-keyword-arguments (package-arguments emacs) ((#:configure-flags flags ''()) - `(list "--with-gnutls=no" "--disable-build-details")))) + `(list "--with-gnutls=no" "--disable-build-details")) + ((#:phases phases) + `(modify-phases ,phases + (delete 'restore-emacs-pdmp) + (delete 'strip-double-wrap))))) (inputs `(("guix-emacs.el" ,(search-auxiliary-file "emacs/guix-emacs.el")) ("ncurses" ,ncurses))) @@ -363,8 +336,7 @@ languages.") `(("pkg-config" ,pkg-config))))) (define-public emacs-xwidgets - (package - (inherit emacs) + (package/inherit emacs (name "emacs-xwidgets") (synopsis "The extensible, customizable, self-documenting text editor (with xwidgets support)") @@ -372,14 +344,18 @@ editor (with xwidgets support)") (arguments (substitute-keyword-arguments (package-arguments emacs) ((#:configure-flags flags ''()) - `(cons "--with-xwidgets" ,flags)))) + `(cons "--with-xwidgets" ,flags)) + ((#:phases phases) + `(modify-phases ,phases + (delete 'restore-emacs-pdmp) + (delete 'strip-double-wrap))))) (inputs `(("webkitgtk" ,webkitgtk) ("libxcomposite" ,libxcomposite) ,@(package-inputs emacs))))) (define-public emacs-no-x - (package (inherit emacs) + (package/inherit emacs (name "emacs-no-x") (synopsis "The extensible, customizable, self-documenting text editor (console only)") @@ -388,13 +364,21 @@ editor (console only)") (package-inputs emacs) '("libx11" "gtk+" "libxft" "libtiff" "giflib" "libjpeg" "imagemagick" "libpng" "librsvg" "libxpm" "libice" - "libsm" + "libsm" "cairo" "pango" "harfbuzz" ;; These depend on libx11, so remove them as well. - "libotf" "m17n-lib" "dbus"))))) + "libotf" "m17n-lib" "dbus"))) + (arguments + (substitute-keyword-arguments (package-arguments emacs) + ((#:configure-flags flags ''()) + `(delete "--with-cairo" ,flags)) + ((#:phases phases) + `(modify-phases ,phases + (delete 'restore-emacs-pdmp) + (delete 'strip-double-wrap))))))) (define-public emacs-no-x-toolkit - (package (inherit emacs) + (package/inherit emacs (name "emacs-no-x-toolkit") (synopsis "The extensible, customizable, self-documenting text editor (without an X toolkit)" ) @@ -402,13 +386,16 @@ editor (without an X toolkit)" ) (inputs (append `(("inotify-tools" ,inotify-tools)) (alist-delete "gtk+" (package-inputs emacs)))) (arguments - `(,@(substitute-keyword-arguments (package-arguments emacs) - ((#:configure-flags cf) - `(cons "--with-x-toolkit=no" ,cf))))))) + (substitute-keyword-arguments (package-arguments emacs) + ((#:configure-flags flags ''()) + `(cons "--with-x-toolkit=no" ,flags)) + ((#:phases phases) + `(modify-phases ,phases + (delete 'restore-emacs-pdmp) + (delete 'strip-double-wrap))))))) (define-public emacs-wide-int - (package - (inherit emacs) + (package/inherit emacs (name "emacs-wide-int") (synopsis "The extensible, customizable, self-documenting text editor (with wide ints)" ) @@ -420,7 +407,7 @@ editor (with wide ints)" ) (define-public guile-emacs (let ((commit "41120e0f595b16387eebfbf731fff70481de1b4b") (revision "0")) - (package (inherit emacs) + (package/inherit emacs (name "guile-emacs") (version (git-version "0.0.0" revision commit)) (source (origin @@ -444,6 +431,8 @@ editor (with wide ints)" ) ;; Tests aren't passing for now. #:tests? #f ,@(package-arguments emacs)) + ((#:configure-flags flags ''()) + `(delete "--with-cairo" ,flags)) ((#:phases phases) `(modify-phases ,phases (add-after 'unpack 'autogen @@ -452,7 +441,9 @@ editor (with wide ints)" ) ;; Build sometimes fails: deps/dispnew.d: No such file or directory (add-before 'build 'make-deps-dir (lambda _ - (invoke "mkdir" "-p" "src/deps")))))))))) + (invoke "mkdir" "-p" "src/deps"))) + (delete 'restore-emacs-pdmp) + (delete 'strip-double-wrap)))))))) (define-public m17n-db (package diff --git a/gnu/packages/embedded.scm b/gnu/packages/embedded.scm index 31fd7b05ce..f9f0e04238 100644 --- a/gnu/packages/embedded.scm +++ b/gnu/packages/embedded.scm @@ -47,6 +47,7 @@ #:use-module (gnu packages guile) #:use-module (gnu packages libftdi) #:use-module (gnu packages libusb) + #:use-module (gnu packages messaging) #:use-module (gnu packages perl) #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) @@ -1357,3 +1358,51 @@ simplifies configuration and is also pluggable: you can write your own west this feature to provide conveniences for building applications, flashing and debugging them, and more.") (license license:expat))) + +(define-public ebusd + (package + (name "ebusd") + (version "3.4") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/john30/ebusd.git") + (commit (string-append "v" version)))) + (file-name (string-append name "-" version "-checkout")) + (sha256 + (base32 + "0iva70bam7wdx60bpd3an9kxr28zxlvp3vprivgqshwwdhqa0hzp")))) + (build-system gnu-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'install 'install-config + (lambda* (#:key inputs outputs #:allow-other-keys) + (let ((config-destination + (string-append (assoc-ref outputs "out") + "/share/ebusd"))) + (copy-recursively (string-append (assoc-ref inputs "config") + "/ebusd-2.1.x") + config-destination) + #t)))))) + (inputs + `(("mosquitto" ,mosquitto))) + (native-inputs + `(("automake" ,automake) + ("autoconf" ,autoconf) + ("config" + ,(origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/john30/ebusd-configuration.git") + (commit "666c0f6b9c4d7545eff7f43ab28a1c7baeab7913"))) + (file-name "config-checkout") + (sha256 + (base32 + "0yxnx8p4lbk614l16854r9s9d8s9c7ixgczfs8mph94xz0wkda7x")))))) + (synopsis "Daemon for communicating with eBUS devices") + (description "This package provides @command{ebusd}, a daemon for +handling communication with eBUS devices connected to a 2-wire bus system +(\"energy bus\" used by numerous heating systems).") + (home-page "https://ebusd.eu/") + (license license:gpl3+))) diff --git a/gnu/packages/emulators.scm b/gnu/packages/emulators.scm index e11b34d85e..d20027dba0 100644 --- a/gnu/packages/emulators.scm +++ b/gnu/packages/emulators.scm @@ -1397,7 +1397,7 @@ play them on systems for which they were never designed!") (define-public mame (package (name "mame") - (version "0.223") + (version "0.224") (source (origin (method git-fetch) @@ -1406,7 +1406,7 @@ play them on systems for which they were never designed!") (commit (apply string-append "mame" (string-split version #\.))))) (file-name (git-file-name name version)) (sha256 - (base32 "0fmf9ygbic4lw84vifhpz8wq2736dj8zsi1cqhb1m0fjq3dvn0vm")) + (base32 "0dpg4hz2f1wlp0rmk5c5xq57fy0sblh97z3l66p814wkgzap4bhx")) (modules '((guix build utils))) (snippet ;; Remove bundled libraries. diff --git a/gnu/packages/engineering.scm b/gnu/packages/engineering.scm index 01f34213fa..a01548b1b7 100644 --- a/gnu/packages/engineering.scm +++ b/gnu/packages/engineering.scm @@ -795,6 +795,51 @@ language.") (license (list license:mpl2.0 ;library license:gpl2+))))) ;Guile bindings and GUI +(define-public inspekt3d + (let ((commit "703f52ccbfedad2bf5240bf8183d1b573c9d54ef") + (revision "0")) + (package + (name "inspekt3d") + (version (git-version "0" revision commit)) + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://gitlab.com/kavalogic-inc/inspekt3d.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "0lan6930g5a9z4ack9jj0zdd0mb2s6q2xzpiwcjdc3pvl9b1nbw4")))) + (build-system gnu-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'patch-libfive-guile-location + (lambda* (#:key inputs #:allow-other-keys) + (substitute* "inspekt3d/library.scm" + (("\"libfive-guile") + (string-append "\"" + (assoc-ref inputs "libfive") + "/lib/libfive-guile"))) + #t))))) + (native-inputs + `(("autoconf" ,autoconf) + ("automake" ,automake) + ("pkg-config" ,pkg-config))) + (inputs + `(("mesa" ,mesa) + ("guile" ,guile-2.2))) + (propagated-inputs + `(("libfive" ,libfive) + ("guile-opengl" ,guile-opengl))) + (home-page "https://gitlab.com/kavalogic-inc/inspekt3d/") + (synopsis "Lightweight 3D viewer for Libfive written in Guile Scheme") + (description + "Inspekt3d is a lightweight 3D viewer for Libfive written in Guile Scheme. +The viewer can be used interactively with a REPL (for example Geiser in +Emacs).") + (license license:gpl3+)))) + ;; TODO Add doc https://gitlab.com/kicad/services/kicad-doc/-/tree/master (define-public kicad (package diff --git a/gnu/packages/enlightenment.scm b/gnu/packages/enlightenment.scm index 60b42f69dc..dc3114d58b 100644 --- a/gnu/packages/enlightenment.scm +++ b/gnu/packages/enlightenment.scm @@ -32,7 +32,6 @@ #:use-module (gnu packages) #:use-module (gnu packages algebra) #:use-module (gnu packages avahi) - #:use-module (gnu packages bash) #:use-module (gnu packages bittorrent) #:use-module (gnu packages check) #:use-module (gnu packages code) @@ -304,6 +303,7 @@ Libraries with some extra bells and whistles.") (let ((efl (assoc-ref %build-inputs "efl"))) (list "-Dsystemd=false" "-Dpackagekit=false" + "-Dwl=true" (string-append "-Dedje-cc=" efl "/bin/edje_cc") (string-append "-Deldbus-codegen=" efl "/bin/eldbus-codegen") (string-append "-Deet=" efl "/bin/eet"))) @@ -315,7 +315,6 @@ Libraries with some extra bells and whistles.") (setenv "HOME" "/tmp") (let ((xkeyboard (assoc-ref inputs "xkeyboard-config")) (setxkbmap (assoc-ref inputs "setxkbmap")) - (utils (assoc-ref inputs "util-linux")) (libc (assoc-ref inputs "libc")) (bc (assoc-ref inputs "bc")) (efl (assoc-ref inputs "efl"))) @@ -346,20 +345,18 @@ Libraries with some extra bells and whistles.") (substitute* "data/etc/meson.build" (("/bin/mount") "/run/setuid-programs/mount") (("/bin/umount") "/run/setuid-programs/umount") - (("/usr/bin/eject") (string-append utils "/bin/eject"))) + (("/usr/bin/eject") "/run/current-system/profile/bin/eject")) (substitute* "src/bin/system/e_system_power.c" (("systemctl") "loginctl")) #t)))))) (native-inputs `(("gettext" ,gettext-minimal) - ("pkg-config" ,pkg-config) - ("util-linux" ,util-linux))) + ("pkg-config" ,pkg-config))) (inputs `(("alsa-lib" ,alsa-lib) ("bc" ,bc) ("bluez" ,bluez) ("dbus" ,dbus) - ("efl" ,efl) ("freetype" ,freetype) ("libxcb" ,libxcb) ("libxext" ,libxext) @@ -367,7 +364,12 @@ Libraries with some extra bells and whistles.") ("puleseaudio" ,pulseaudio) ("setxkbmap" ,setxkbmap) ("xcb-util-keysyms" ,xcb-util-keysyms) - ("xkeyboard-config" ,xkeyboard-config))) + ("xkeyboard-config" ,xkeyboard-config) + ("xorg-server-xwayland" ,xorg-server-xwayland))) + (propagated-inputs + `(("efl" ,efl) + ("libxkbcommon" ,libxkbcommon) + ("wayland-protocols" ,wayland-protocols))) (home-page "https://www.enlightenment.org/about-enlightenment") (synopsis "Lightweight desktop environment") (description @@ -378,17 +380,7 @@ embedded systems.") (license license:bsd-2))) (define-public enlightenment-wayland - (package - (inherit enlightenment) - (name "enlightenment-wayland") - (arguments - (substitute-keyword-arguments (package-arguments enlightenment) - ((#:configure-flags flags) - `(cons* "-Dwl=true" ,flags)))) - (inputs - `(("wayland-protocols" ,wayland-protocols) - ("xorg-server-xwayland" ,xorg-server-xwayland) - ,@(package-inputs enlightenment))))) + (deprecated-package "enlightenment-wayland" enlightenment)) (define-public python-efl (package @@ -405,13 +397,15 @@ embedded systems.") (modules '((guix build utils))) ;; Remove files generated by Cython (snippet - '(begin - (copy-file "efl/dbus_mainloop/e_dbus.c" "efl/dbus_mainloop/e_dbus.q") - (for-each delete-file (find-files "efl" ".*\\.c$")) - (delete-file "efl/eo/efl.eo_api.h") - (copy-file "efl/dbus_mainloop/e_dbus.q" "efl/dbus_mainloop/e_dbus.c") - (delete-file "efl/dbus_mainloop/e_dbus.q") - #t)))) + '(begin + (for-each (lambda (file) + (let ((generated-file + (string-append (string-drop-right file 3) "c"))) + (when (file-exists? generated-file) + (delete-file generated-file)))) + (find-files "efl" "\\.pyx$")) + (delete-file "efl/eo/efl.eo_api.h") + #t)))) (build-system python-build-system) (arguments '(#:phases @@ -572,14 +566,14 @@ directories. (define-public evisum (package (name "evisum") - (version "0.5.3") + (version "0.5.4") (source (origin (method url-fetch) (uri (string-append "https://download.enlightenment.org/rel/apps/" "evisum/evisum-" version ".tar.xz")) (sha256 - (base32 "06ws75qfid0xizasw2aqpdhvxl4c31bn66fqa8aq4w0rykzs2r46")))) + (base32 "1ip3w2d476g45sivqvm1madfyqmkni9q2i99qqxk53859jgs91pa")))) (build-system meson-build-system) (arguments '(#:tests? #f)) ; no tests diff --git a/gnu/packages/finance.scm b/gnu/packages/finance.scm index 332142f0c2..111069cb08 100644 --- a/gnu/packages/finance.scm +++ b/gnu/packages/finance.scm @@ -480,7 +480,7 @@ other machines/servers. Electrum does not download the Bitcoin blockchain.") (define-public electron-cash (package (name "electron-cash") - (version "4.0.15") + (version "4.1.0") (source (origin (method git-fetch) @@ -489,11 +489,11 @@ other machines/servers. Electrum does not download the Bitcoin blockchain.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "0bvj64fdxpi0dbivhgv509kqq503zjp7r7xckl8q5c48j5h1zik2")))) + (base32 "1ccfm6kkmbkvykfdzrisxvr0lx9kgq4l43ixk6v3xnvhnbfwz4s2")))) (build-system python-build-system) (inputs `(("libevent" ,libevent) - ("libsecp256k1", libsecp256k1) + ("libsecp256k1", libsecp256k1-bitcoin-cash) ("openssl" ,openssl) ("python-cython" ,python-cython) ("python-dateutil", python-dateutil) @@ -530,7 +530,9 @@ other machines/servers. Electrum does not download the Bitcoin blockchain.") (lambda* (#:key inputs #:allow-other-keys) (substitute* "lib/secp256k1.py" (("library_paths = .* 'libsecp256k1.so.0'.") - (string-append "library_paths = ('" (assoc-ref inputs "libsecp256k1") "/lib/libsecp256k1.so.0'"))) + (string-append "library_paths = ('" + (assoc-ref inputs "libsecp256k1") + "/lib/libsecp256k1.so.0'"))) #t)) (add-after 'install 'wrap-qt (lambda* (#:key outputs #:allow-other-keys) @@ -1397,7 +1399,7 @@ entity management.") (define-public bitcoin-unlimited (package (name "bitcoin-unlimited") - (version "1.8.0.0") + (version "1.9.0.0") (source (origin (method git-fetch) @@ -1406,7 +1408,7 @@ entity management.") (commit (string-append "BCHunlimited" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "1ivkig6q7i4n389dg1zv06cmfki20bjq0slmshx0p5a1aavkqj7k")))) + (base32 "1a64h7mcqdra4ahnw1nycp4ysx308ymgbl4yn5fj5jfaszdzvy0h")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) diff --git a/gnu/packages/fonts.scm b/gnu/packages/fonts.scm index 77484157e3..c7ce03b2b7 100644 --- a/gnu/packages/fonts.scm +++ b/gnu/packages/fonts.scm @@ -1203,7 +1203,7 @@ typeface, by mimicking Comic Sans while fixing its most obvious shortcomings.") (package (name "font-iosevka") ;; When updating, also update the hash of the Iosevka variant(s) below. - (version "3.2.2") + (version "3.4.7") (source (origin (method url-fetch/zipbomb) @@ -1211,7 +1211,7 @@ typeface, by mimicking Comic Sans while fixing its most obvious shortcomings.") "/releases/download/v" version "/ttc-iosevka-" version ".zip")) (sha256 - (base32 "16iqr4zjlshrgzcs3sjp3gz777gpi069r7p7scqi6vap9acqjvph")))) + (base32 "178xyxz57ncigv715db0898d5arcx1l7qi73a8prb2fdlb7x2yx6")))) (build-system font-build-system) (home-page "https://be5invis.github.io/Iosevka/") (synopsis "Coders' typeface, built from code") @@ -1234,7 +1234,7 @@ programming. Iosevka is completely generated from its source code.") "/releases/download/v" version "/ttc-iosevka-slab-" version ".zip")) (sha256 - (base32 "0knsb1b0wqv50r7f9128xvq344x7hnvgm7kh1dxaahlck910z62x")))))) + (base32 "1zqgly4ymmmz3ckfsc2vdxw6d62axcyl79fq3gi630c4951nfikz")))))) (define-public font-iosevka-term (package @@ -1249,7 +1249,7 @@ programming. Iosevka is completely generated from its source code.") "/ttf-iosevka-term-" version ".zip")) (sha256 (base32 - "0nyq6iq9xjn9nqwh1fh4v0pvblycmm8ssw7y3vcjv1ymbkdqfqhr")))) + "0nfwxhxgrgz3hhhrvr759263bm88zbh0zsavpnmphxwg9kykjq39")))) (arguments `(#:phases (modify-phases %standard-phases @@ -1271,7 +1271,7 @@ programming. Iosevka is completely generated from its source code.") "/ttf-iosevka-term-slab-" version ".zip")) (sha256 (base32 - "1blhhbnk2hyaxjrz88icd2gwyniq5idxd0h6rqx6vjcack6094z0")))) + "01ynnwlfq3294p8v0656xw6wcfmqklf0yqwkqh3sh2wmj7rrs7wi")))) (arguments `(#:phases (modify-phases %standard-phases @@ -1292,7 +1292,7 @@ programming. Iosevka is completely generated from its source code.") "/releases/download/v" version "/ttc-iosevka-aile-" version ".zip")) (sha256 - (base32 "1zg0gn4gcf3w8n8jzf93y9ninyn3bci31c5zss3mxzz1lzfm8zd5")))))) + (base32 "0h4wzjyw3h5zbxzfb71z7aj5xwp8r1hd93qim6zicxfk9dgczgw5")))))) (define-public font-iosevka-etoile (package @@ -1306,7 +1306,7 @@ programming. Iosevka is completely generated from its source code.") "/releases/download/v" version "/ttc-iosevka-etoile-" version ".zip")) (sha256 - (base32 "1061yaf35f19dcym4k552q1yzbsbc98r3glm9frslirra9f33sl2")))))) + (base32 "1n1jy7g0q0kd4ihsyka1v02s7xgpg80rf9sml1yhxkqw5pq62972")))))) (define-public font-iosevka-sparkle (package @@ -1320,7 +1320,7 @@ programming. Iosevka is completely generated from its source code.") "/releases/download/v" version "/ttc-iosevka-sparkle-" version ".zip")) (sha256 - (base32 "1c1s9j6qgyhn4md0kql0x2201nbs5jx3612jf8q020gm484xqq03")))))) + (base32 "0chl6x3xy6alq64sax71psvpq6f6fgw6pbn04f5j5skgrbqkk292")))))) (define-public font-sarasa-gothic (package diff --git a/gnu/packages/fontutils.scm b/gnu/packages/fontutils.scm index ed47f6436c..f6c8dc51f4 100644 --- a/gnu/packages/fontutils.scm +++ b/gnu/packages/fontutils.scm @@ -2,7 +2,7 @@ ;;; Copyright © 2013, 2014, 2015 Andreas Enge <andreas@enge.fr> ;;; Copyright © 2014, 2016 Eric Bavier <bavier@member.fsf.org> ;;; Copyright © 2016 Mark H Weaver <mhw@netris.org> -;;; Copyright © 2016, 2017 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2016, 2017, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2017 Rene Saavedra <rennes@openmailbox.org> ;;; Copyright © 2017 Leo Famulari <leo@famulari.name> ;;; Copyright © 2017 Nikita <nikita@n0.is> @@ -100,7 +100,7 @@ anti-aliased glyph bitmap generation with 256 gray levels.") (define-public ttfautohint (package (name "ttfautohint") - (version "1.5") + (version "1.8.3") (source (origin (method url-fetch) @@ -108,8 +108,7 @@ anti-aliased glyph bitmap generation with 256 gray levels.") version ".tar.gz")) (sha256 (base32 - "1lgghck46p33z3hg8dnl76jryig4fh6d8rhzms837zp7x4hyfkv4")) - (patches (list (search-patch "ttfautohint-source-date-epoch.patch"))))) + "0zpqgihn3yh3v51ynxwr8asqrijvs4gv686clwv7bm8sawr4kfw7")))) (build-system gnu-build-system) (native-inputs `(("flex" ,flex) @@ -119,7 +118,8 @@ anti-aliased glyph bitmap generation with 256 gray levels.") `(("freetype" ,freetype) ("harfbuzz" ,harfbuzz))) (arguments - `(#:configure-flags '("--with-qt=no"))) ;no gui + `(#:configure-flags '("--disable-static" + "--with-qt=no"))) ;no gui (synopsis "Automated font hinting") (description "ttfautohint provides a 99% automated hinting process and a platform for diff --git a/gnu/packages/freedesktop.scm b/gnu/packages/freedesktop.scm index 6b70fd0ea2..481cb3cd1d 100644 --- a/gnu/packages/freedesktop.scm +++ b/gnu/packages/freedesktop.scm @@ -1717,14 +1717,14 @@ their MIME type. (define-public uchardet (package (name "uchardet") - (version "0.0.6") + (version "0.0.7") (source (origin (method url-fetch) (uri (string-append "https://www.freedesktop.org/software/" name "/releases/" name "-" version ".tar.xz")) (sha256 - (base32 "0q9c02b6nmw41yfsiqsnphgc3f0yg3fj31wkccp47cmwvy634lc3")))) + (base32 "1ca51sryhryqz82v4d0graaiqqq5w2f33a9gj83b910xmq499irz")))) (build-system cmake-build-system) (home-page "https://www.freedesktop.org/wiki/Software/uchardet/") (synopsis "Encoding detector library") diff --git a/gnu/packages/freeipmi.scm b/gnu/packages/freeipmi.scm index 78ab287c5b..0bb2692461 100644 --- a/gnu/packages/freeipmi.scm +++ b/gnu/packages/freeipmi.scm @@ -1,7 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2013 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2015, 2016, 2017, 2020 Efraim Flashner <efraim@flashner.co.il> -;;; Copyright © 2019 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -28,14 +28,14 @@ (define-public freeipmi (package (name "freeipmi") - (version "1.6.5") + (version "1.6.6") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/freeipmi/freeipmi-" version ".tar.gz")) (sha256 (base32 - "1ncf1s84752xaq07h36wrxa5ww1167s2bizkww0igxv8djyddwk1")))) + "1ava5s0babfwx6dqi87phzyzjjgyah7avhljrxrjwn2cniwh38yg")))) (build-system gnu-build-system) (arguments '(#:configure-flags '("--disable-static"))) diff --git a/gnu/packages/game-development.scm b/gnu/packages/game-development.scm index 4740546dbe..c8e0e94099 100644 --- a/gnu/packages/game-development.scm +++ b/gnu/packages/game-development.scm @@ -5,7 +5,7 @@ ;;; Copyright © 2015, 2018 Alex Kost <alezost@gmail.com> ;;; Copyright © 2015, 2016, 2017 David Thompson <davet@gnu.org> ;;; Copyright © 2016, 2017, 2018, 2019, 2020 Efraim Flashner <efraim@flashner.co.il> -;;; Copyright © 2016, 2017 Kei Kebreau <kkebreau@posteo.net> +;;; Copyright © 2016, 2017, 2020 Kei Kebreau <kkebreau@posteo.net> ;;; Copyright © 2016, 2018, 2019 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2016, 2017, 2018 Julian Graham <joolean@gmail.com> ;;; Copyright © 2017, 2018, 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> @@ -342,26 +342,22 @@ compiling NML files (along with their associated language, sound and graphic files) into @file{.grf} and/or @file{.nfo} files.") (license license:gpl2+))) -(define-public python-sge-pygame +(define-public python-sge (package - (name "python-sge-pygame") - (version "1.5.1") + (name "python-sge") + (version "1.7") (source (origin (method url-fetch) - (uri (string-append "mirror://savannah/stellarengine/" - (version-major+minor version) "/sge-pygame-" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (pypi-uri "sge" version)) (sha256 (base32 - "1rl3xjzh78sl0sq3xl8rl7cgp9v9v3h7s2pfwn7nj1vrmffzkcpd")))) + "02fn6v6bxk3sngwd4kd3mglrp0jlnhx7x6h8nnkik6wdv150a0wv")))) (build-system python-build-system) (propagated-inputs `(("python-pygame" ,python-pygame) - ("python-six" ,python-six) ("python-uniseg" ,python-uniseg))) - (home-page "http://stellarengine.nongnu.org") + (home-page "https://python-sge.github.io/") (synopsis "2D game engine for Python") (description "The SGE Game Engine (\"SGE\", pronounced like \"Sage\") is a @@ -370,8 +366,8 @@ you can focus on the game itself. This makes more rapid game development possible, and it also makes the SGE easy to learn.") (license license:lgpl3+))) -(define-public python2-sge-pygame - (package-with-python2 python-sge-pygame)) +(define-public python-sge-pygame + (deprecated-package "python-sge-pygame" python-sge)) (define-public python-tmx (package @@ -412,14 +408,15 @@ levels.") (define-public python-xsge (package (name "python-xsge") - (version "2018.02.26") + (version "2020.09.07") (source (origin (method url-fetch) - (uri (string-append "mirror://savannah/xsge/xsge/xsge-" - version ".tar.gz")) + (uri (string-append "https://github.com/python-sge/xsge" + "/releases/download/v" version + "/xsge-" version ".zip")) (sha256 (base32 - "0bx93hgf7cgdw2gsygbh59y8vpw37pgsa279rajw3fkdpl8vrc40")))) + "136xgy3f9vw636wxpqbha022avk0wyxw63mm3a2dvwhh90s716f9")))) (build-system python-build-system) (arguments '(#:phases @@ -432,12 +429,11 @@ levels.") (string-append "--prefix=" (assoc-ref outputs "out")) "--root=/")))) #:tests? #f)) ; no check target + (native-inputs + `(("unzip" ,unzip))) (propagated-inputs - `(("python-sge-pygame" ,python-sge-pygame) - ("python-pygame" ,python-pygame) - ("python-six" ,python-six) - ("python-tmx" ,python-tmx))) - (home-page "http://xsge.nongnu.org") + `(("python-sge" ,python-sge))) + (home-page "https://python-sge.github.io/") (synopsis "Extensions for the SGE Game Engine") (description "xSGE is a collection of modules that make doing certain tasks with the SGE @@ -446,9 +442,6 @@ GUI toolkit, lighting and physics frameworks and @code{Tiled} TMX format support.") (license license:gpl3+))) -(define-public python2-xsge - (package-with-python2 python-xsge)) - (define-public tiled (package (name "tiled") diff --git a/gnu/packages/games.scm b/gnu/packages/games.scm index af20bc508f..f6819873df 100644 --- a/gnu/packages/games.scm +++ b/gnu/packages/games.scm @@ -17,7 +17,7 @@ ;;; Copyright © 2016, 2017 Rodger Fox <thylakoid@openmailbox.org> ;;; Copyright © 2016, 2017, 2018 Nikita <nikita@n0.is> ;;; Copyright © 2016 Albin Söderqvist <albin@fripost.org> -;;; Copyright © 2016, 2017, 2018, 2019 Kei Kebreau <kkebreau@posteo.net> +;;; Copyright © 2016, 2017, 2018, 2019, 2020 Kei Kebreau <kkebreau@posteo.net> ;;; Copyright © 2016 Alex Griffin <a@ajgrf.com> ;;; Copyright © 2016, 2017, 2018, 2019, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2016 Jan Nieuwenhuizen <janneke@gnu.org> @@ -385,15 +385,17 @@ The game includes a built-in editor so you can design and share your own maps.") (define-public armagetronad (package (name "armagetronad") - (version "0.2.8.3.5") + (version "0.2.9.0.1") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/armagetronad/stable/" - version "/armagetronad-" version ".src.tar.gz")) + version "/armagetronad-" version ".tbz")) (sha256 (base32 - "1z266haq22n5b0733h7qsg1rpzhz8lvm82f7wd06r008iiar7jdl")))) + "19rfhlg4gp0r7k1j8v4iw20325ciy156nmzax4xikmw22c6nmxcz")))) (build-system gnu-build-system) + (native-inputs + `(("pkg-config" ,pkg-config))) (inputs `(("libxml2" ,libxml2) ("sdl" ,sdl) @@ -1811,15 +1813,16 @@ Every puzzle has a complete solution, although there may be more than one.") (define-public retux (package (name "retux") - (version "1.3.6") + (version "1.4") (source (origin (method url-fetch) - (uri (string-append "mirror://savannah/retux/" + (uri (string-append "https://github.com/retux-game/retux/" + "releases/download/v" (version-major+minor version) "/retux-" version "-src.tar.gz")) (sha256 (base32 - "01bidh4zisjp3nc436x0g85v60dvwb3ig37i7y01sa71j8fm4fmb")))) + "1hxy1pvlxhk0ci3wh2i3mmr82faqdjnnxsiwwr5gcr93nfnw9w5f")))) (build-system python-build-system) (arguments `(#:tests? #f ; no check target @@ -1831,28 +1834,22 @@ Every puzzle has a complete solution, although there may be more than one.") (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) - (data (string-append out "/share/retux")) - (doc (string-append out "/share/doc/retux"))) + (data (string-append out "/share/retux"))) (mkdir-p bin) (substitute* "retux.py" ;; Use the correct data directory. (("os\\.path\\.join\\(os\\.path\\.dirname\\(__file__\\), \"data\"\\),") - (string-append "\"" data "\",")) - ;; Use Python 3 so the patch-shebangs phase works properly. - ((".*python2.*") "#!/usr/bin/python3")) + (string-append "\"" data "\","))) (copy-file "retux.py" (string-append bin "/retux")) - (copy-recursively "data" data) - - (install-file "COPYING" doc) #t)))))) (inputs `(("python-sge-pygame" ,python-sge-pygame) ("python-six" ,python-six) ("python-xsge" ,python-xsge))) - (home-page "http://retux.nongnu.org") + (home-page "https://retux-game.github.io/") (synopsis "Action platformer game") (description "ReTux is an action platformer loosely inspired by the Mario games, @@ -3667,7 +3664,7 @@ falling, themeable graphics and sounds, and replays.") (define-public wesnoth (package (name "wesnoth") - (version "1.14.13") + (version "1.14.14") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/wesnoth/wesnoth-" @@ -3676,7 +3673,7 @@ falling, themeable graphics and sounds, and replays.") "wesnoth-" version ".tar.bz2")) (sha256 (base32 - "1pmqj4rah0256qi9w394ksb9apid723i5f5agkg6x1lahb1ac91q")))) + "1l7mdxn4kw938qz824057rqh99b7y9439a54s64n1xz95w77lp0r")))) (build-system cmake-build-system) (arguments `(#:tests? #f)) ;no check target @@ -4788,7 +4785,7 @@ of war. Widelands also offers an Artificial Intelligence to challenge you.") (define-public starfighter (package (name "starfighter") - (version "2.3.1") + (version "2.3.2") (source (origin (method url-fetch) (uri (string-append @@ -4797,7 +4794,7 @@ of war. Widelands also offers an Artificial Intelligence to challenge you.") version "-src.tar.gz")) (sha256 (base32 - "13396hvsj4cswlrw52kwqn37dadxps00vhr0hrqgm87fl4ih5yyx")))) + "1nvi277cazsw36b6nhd5nmk0cjvm71rlxasy24mf18j7fsvq9vp8")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) @@ -7048,7 +7045,7 @@ Strife, Chex Quest, and fan-created games like Harmony, Hacx and Freedoom.") (define-public odamex (package (name "odamex") - (version "0.8.1") + (version "0.8.3") (source (origin (method url-fetch) @@ -7056,7 +7053,7 @@ Strife, Chex Quest, and fan-created games like Harmony, Hacx and Freedoom.") "mirror://sourceforge/odamex/Odamex/" version "/" "odamex-src-" version ".tar.gz")) (sha256 - (base32 "1ywbqkfacc9fc5di3dn95y5ah2ys9i241j64q3f37a73x92llw1i")))) + (base32 "0f887g87bmcq4dpcga7xc2mpxs947dkbc934ir9xs55gz6z13q96")))) (build-system cmake-build-system) (arguments `(#:tests? #f)) ; no tests (inputs @@ -8848,7 +8845,8 @@ play with up to four players simultaneously. It has network support.") ;; XXX: Engine is built as Pascal source code, requiring Free Pascal ;; Compiler, which we haven't packaged yet. With the flag below, we use ;; a Pascal to C translator and Clang instead. - `(#:configure-flags (list "-DBUILD_ENGINE_C=ON") + `(#:configure-flags (list "-DBUILD_ENGINE_C=ON" + "-Dhaskell_flags=-dynamic;-fPIC") #:phases (modify-phases %standard-phases (replace 'check diff --git a/gnu/packages/gcc.scm b/gnu/packages/gcc.scm index a39ac3b84c..4d5aaa7070 100644 --- a/gnu/packages/gcc.scm +++ b/gnu/packages/gcc.scm @@ -9,6 +9,7 @@ ;;; Copyright © 2018, 2020 Marius Bakke <mbakke@fastmail.com> ;;; Copyright © 2020 Joseph LaFreniere <joseph@lafreniere.xyz> ;;; Copyright © 2020 Guy Fleury Iteriteka <gfleury@disroot.org> +;;; Copyright © 2020 Simon Tournier <zimon.toutoune@gmail.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -759,11 +760,26 @@ as the 'native-search-paths' field." (for-each delete-file (find-files (string-append (assoc-ref outputs "out") "/bin") ".*(c\\+\\+|cpp|g\\+\\+|gcov|gcc|gcc-.*)")) - #t)))))))) + #t)))))) + (synopsis "GCC library generating machine code on-the-fly at runtime") + (description + "This package is part of the GNU Compiler Collection and provides an +embeddable library for generating machine code on-the-fly at runtime. This +shared library can then be dynamically-linked into bytecode interpreters and +other such programs that want to generate machine code on-the-fly at run-time. +It can also be used for ahead-of-time code generation for building standalone +compilers. The just-in-time (jit) part of the name is now something of a +misnomer."))) (define-public gccgo-4.9 - (custom-gcc gcc-4.9 "gccgo" '("go") + (custom-gcc (package + (inherit gcc-4.9) + (synopsis "Go frontend to GCC") + (description + "This package is part of the GNU Compiler Collection and +provides the GNU compiler for the Go programming language.")) + "gccgo" '("go") %generic-search-paths ;; Suppress the separate "lib" output, because otherwise the ;; "lib" and "out" outputs would refer to each other, creating diff --git a/gnu/packages/genimage.scm b/gnu/packages/genimage.scm index 7ad710082c..c9ed6258a0 100644 --- a/gnu/packages/genimage.scm +++ b/gnu/packages/genimage.scm @@ -50,7 +50,9 @@ (file-name (string-append name "-" version "-checkout")) (sha256 (base32 - "15jmh17lvm3jw9c92bjarly7iwhmnfl322d91mprfv10ppb9ip54")))) + "15jmh17lvm3jw9c92bjarly7iwhmnfl322d91mprfv10ppb9ip54")) + ;; will be shipped with release 14 + (patches (search-patches "genimage-signedness.patch")))) (build-system gnu-build-system) (arguments `(#:phases @@ -169,7 +171,6 @@ ("automake" ,automake) ;;; Note: cramfs is obsolete. ("dtc" ,dtc) ; for the tests - ("fdisk" ,fdisk) ; for the tests ("pkg-config" ,pkg-config) ("util-linux" ,util-linux))) ; for the tests (inputs diff --git a/gnu/packages/geo.scm b/gnu/packages/geo.scm index ab1d691c6c..291b928338 100644 --- a/gnu/packages/geo.scm +++ b/gnu/packages/geo.scm @@ -12,6 +12,7 @@ ;;; Copyright © 2019 Wiktor Żelazny <wzelazny@vurv.cz> ;;; Copyright © 2019 Hartmut Goebel <h.goebel@crazy-compilers.com> ;;; Copyright © 2020 Marius Bakke <mbakke@fastmail.com> +;;; Copyright © 2020 Christopher Baines <mail@cbaines.net> ;;; ;;; This file is part of GNU Guix. ;;; @@ -1290,7 +1291,7 @@ to the OSM opening hours specification.") (modules '((guix build utils))) (snippet '(begin - (for-each delete-file (find-files "." ".*.jar$")) + (for-each delete-file (find-files "." ".*.jar$")) #t)))) (build-system ant-build-system) (native-inputs @@ -1339,7 +1340,8 @@ to the OSM opening hours specification.") (filter (lambda (s) (let ((source (assoc-ref inputs "source"))) - (not (equal? (substring s 0 (string-length source)) source)))) + (not (equal? (substring s 0 (string-length source)) + source)))) (string-split (getenv "CLASSPATH") #\:)) ":")) #t)) @@ -1386,6 +1388,19 @@ to the OSM opening hours specification.") "Is-Local-Build: true\n" "Build-Date: 1970-01-01 00:00:00 +0000\n")))) #t)) + (add-after 'install 'install-share-directories + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out")) + (share-directories '("applications" "icons" "man" "menu" + "metainfo" "mime" "pixmaps"))) + (for-each (lambda (directory) + (copy-recursively (string-append + "native/linux/tested/usr/share/" + directory) + (string-append + out "/share/" directory))) + share-directories)) + #t)) (add-after 'install 'install-bin (lambda* (#:key outputs inputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) diff --git a/gnu/packages/gnome.scm b/gnu/packages/gnome.scm index 5664f76ae2..85b95a7507 100644 --- a/gnu/packages/gnome.scm +++ b/gnu/packages/gnome.scm @@ -155,6 +155,7 @@ #:use-module (gnu packages polkit) #:use-module (gnu packages popt) #:use-module (gnu packages pretty-print) + #:use-module (gnu packages protobuf) #:use-module (gnu packages pulseaudio) #:use-module (gnu packages python) #:use-module (gnu packages python-crypto) @@ -1028,7 +1029,7 @@ Library reference documentation.") (define-public phodav (package (name "phodav") - (version "2.4") + (version "2.5") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/" name "/" @@ -1036,10 +1037,21 @@ Library reference documentation.") name "-" version ".tar.xz")) (sha256 (base32 - "1hxq8c5qfah3w7mxcyy3yhzdgswplll31a69p5mqdl04bsvw5pbx")))) + "045rdzf8isqmzix12lkz6z073b5qvcqq6ad028advm5gf36skw3i")))) (build-system meson-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-before 'check 'start-virtual-dir-server + ;; The same server when started by tests/virtual-dir returns an + ;; unexpected status (4 instead of 200) and fails a test. It is + ;; unclear why starting it manually here makes it pass. + (lambda _ + (system "tests/virtual-dir-server &") + #t))))) (native-inputs - `(("gettext" ,gettext-minimal) + `(("docbook-xml" ,docbook-xml-4.3) + ("gettext" ,gettext-minimal) ("glib:bin" ,glib "bin") ("gtk-doc" ,gtk-doc) ("pkg-config" ,pkg-config))) @@ -2907,7 +2919,13 @@ API add-ons to make GTK+ widgets OpenGL-capable.") (description "Glade is a rapid application development (RAD) tool to enable quick & easy development of user interfaces for the GTK+ toolkit and the GNOME desktop environment.") - (license license:lgpl2.0+))) + (license license:lgpl2.0+) + (native-search-paths (list (search-path-specification + (variable "GLADE_CATALOG_SEARCH_PATH") + (files '("share/glade/catalogs"))) + (search-path-specification + (variable "GLADE_MODULE_SEARCH_PATH") + (files '("lib/glade/modules"))))))) (define-public libcroco (package @@ -4033,7 +4051,7 @@ libraries written in C.") (define-public vala-0.48 (package (inherit vala) - (version "0.48.7") + (version "0.48.9") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/vala/" @@ -4041,7 +4059,7 @@ libraries written in C.") "vala-" version ".tar.xz")) (sha256 (base32 - "0lswkb7gj0chas9n3l3dbrm9l71hs77adhvm2v600id2ipi37pi8")))))) + "1agyrvslv2yh9ikiw7k5nw6j6il1l2zrzfan0pzdpb9xpg9idslw")))))) (define-public vte (package @@ -4635,7 +4653,7 @@ and other secrets. It communicates with the \"Secret Service\" using DBus.") (define-public gnome-mines (package (name "gnome-mines") - (version "3.34.0") + (version "3.36.1") (source (origin (method url-fetch) @@ -4643,8 +4661,7 @@ and other secrets. It communicates with the \"Secret Service\" using DBus.") (version-major+minor version) "/" name "-" version ".tar.xz")) (sha256 - (base32 - "1spxa6qr1y8s5rrsvpciywpvhk812ngn95s1apaxaigwy2g1iw54")))) + (base32 "0m2680r94nk61imym4x73j03jwfjd8cxm592m5ybiqdfdw6i723i")))) (build-system meson-build-system) (arguments '(#:glib-or-gtk? #t @@ -5158,7 +5175,7 @@ settings, themes, mouse settings, and startup of other daemons.") (define-public totem-pl-parser (package (name "totem-pl-parser") - (version "3.26.3") + (version "3.26.5") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/totem-pl-parser/" @@ -5166,7 +5183,7 @@ settings, themes, mouse settings, and startup of other daemons.") "totem-pl-parser-" version ".tar.xz")) (sha256 (base32 - "13a45py2j1r9967zgww8kd24bn2fhycd4m3kzr90sxx9l2w03z8f")))) + "132jihnf51zs98yjkc6jxyqib4f3dawpjm17g4bj4j78y93dww2k")))) (build-system meson-build-system) (arguments ;; FIXME: Tests require gvfs. @@ -5646,16 +5663,15 @@ as possible!") (define-public grilo (package (name "grilo") - (version "0.3.10") + (version "0.3.12") (source (origin (method url-fetch) - (uri (string-append "mirror://gnome/sources/" name "/" + (uri (string-append "mirror://gnome/sources/grilo/" (version-major+minor version) "/" - name "-" version ".tar.xz")) + "grilo-" version ".tar.xz")) (sha256 - (base32 - "1s7ilyywf18q26aj5c4709kfizqywjlnacp4jzmj9v9i9kkv4i3y")))) + (base32 "0w8sq5g6g1rg85h53vbll8va70fcp6082mlpmy98aa03444ddyyv")))) (build-system meson-build-system) (native-inputs `(("glib:bin" ,glib "bin") ; for glib-mkenums and glib-genmarshal @@ -5687,7 +5703,7 @@ for application developers.") (define-public grilo-plugins (package (name "grilo-plugins") - (version "0.3.10") + (version "0.3.11") (source (origin (method url-fetch) @@ -5695,8 +5711,7 @@ for application developers.") (version-major+minor version) "/" name "-" version ".tar.xz")) (sha256 - (base32 - "0jldaixc4kzycn5v8ixkjld1n0z3dp0l1p3vchgdwpvdvc7kcfw0")))) + (base32 "0wyd3n5mn7b77hxylkc3f62v01mlavh96901pz342hwrn42ydqnx")))) (build-system meson-build-system) (native-inputs `(("gettext" ,gettext-minimal) @@ -6169,7 +6184,7 @@ USB transfers with your high-level application or system daemon.") (define-public simple-scan (package (name "simple-scan") - (version "3.36.4") + (version "3.36.6") (source (origin (method url-fetch) @@ -6177,7 +6192,7 @@ USB transfers with your high-level application or system daemon.") (version-major+minor version) "/" "simple-scan-" version ".tar.xz")) (sha256 - (base32 "09gmzrlljdqkj3w6wa1c27wypy6j8z9dw3jzv9izfqvp38liibsn")))) + (base32 "0x9hzqnji5l966yy2k5gppl8hqasn3sd5an4sr8srjmncxcs80ys")))) (build-system meson-build-system) ;; TODO: Fix icons in home screen, About dialogue, and scan menu. (arguments @@ -8263,7 +8278,7 @@ easy, safe, and automatic.") (define-public tracker (package (name "tracker") - (version "2.3.4") + (version "2.3.5") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/tracker/" @@ -8271,7 +8286,7 @@ easy, safe, and automatic.") "tracker-" version ".tar.xz")) (sha256 (base32 - "0vai0qz9jn3z5dlzysynwhbbmslp84ygdql81f5wfxxr98j54yap")))) + "1ixxyqjlv7pnl4j8g6b72fkbjvzfspza8y71ppkncry8i6xkr223")))) (build-system meson-build-system) (arguments `(#:glib-or-gtk? #t @@ -8333,7 +8348,7 @@ endpoint and it understands SPARQL. ") (define-public tracker-miners (package (name "tracker-miners") - (version "2.3.3") + (version "2.3.4") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/tracker-miners/" @@ -8341,7 +8356,7 @@ endpoint and it understands SPARQL. ") "/tracker-miners-" version ".tar.xz")) (sha256 (base32 - "06abxrnrz7xayykrabn135rpsm6z0fqw7gibrb9j09l6swlalwkl")))) + "10wy8d8ski52k809p7s6lbw72qmg05bbmhnl00vx4qrbzqyxvc0b")))) (build-system meson-build-system) (arguments `(#:glib-or-gtk? #t @@ -9159,7 +9174,7 @@ existing databases over the internet.") ("gtk+" ,gtk+) ("gobject-introspection" ,gobject-introspection) ("gsettings-desktop-schemas" ,gsettings-desktop-schemas) - ("libhandy" ,libhandy) + ("libhandy" ,libhandy-0.0) ("libnotify" ,libnotify) ("libsoup" ,libsoup) ("nautilus" ,nautilus) @@ -10268,7 +10283,7 @@ hexadecimal or ASCII. It is useful for editing binary files in general.") (define-public libdazzle (package (name "libdazzle") - (version "3.34.1") + (version "3.37.1") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/libdazzle/" @@ -10276,7 +10291,7 @@ hexadecimal or ASCII. It is useful for editing binary files in general.") "libdazzle-" version ".tar.xz")) (sha256 (base32 - "01cmcrd75b7ns7j2b4p6h7pv68vjhkcl9zbvzzx7pf4vknxir61x")))) + "03r5cr11dc031qa3694bpgm3lajrhiiln67kvl7vjj4q0scf7w7x")))) (build-system meson-build-system) (arguments `(#:phases @@ -10480,20 +10495,20 @@ advanced image management tool") (define-public libhandy (package (name "libhandy") - (version "0.0.12") + (version "1.0.0") (source (origin (method git-fetch) (uri (git-reference - (url "https://source.puri.sm/Librem5/libhandy") - (commit (string-append "v" version)))) + (url "https://gitlab.gnome.org/GNOME/libhandy") + (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "09wlknarzsbk9hr5ws6s7x5kibkhx9ayrbhshfqib4zkhq2f76hw")))) + (base32 "193y09yy0302x8fkyrnq591m805xp68bkd93fl5qggxi52k8pj0v")))) (build-system meson-build-system) (arguments `(#:configure-flags - '("-Dglade_catalog=disabled" + '("-Dglade_catalog=enabled" "-Dgtk_doc=true") #:phases (modify-phases %standard-phases @@ -10504,7 +10519,9 @@ advanced image management tool") (setenv "DISPLAY" ":1") #t))))) (inputs - `(("gtk+" ,gtk+))) + `(("gtk+" ,gtk+) + ("glade" ,glade3) + ("libxml2" ,libxml2))) (native-inputs `(("glib:bin" ,glib "bin") ("gobject-introspection" ,gobject-introspection) ; for g-ir-scanner @@ -10523,6 +10540,24 @@ interfaces for mobile devices using GTK+. It provides responsive GTK+ widgets for usage on small and big screens.") (license license:lgpl2.1+))) +(define-public libhandy-0.0 + (package + (inherit libhandy) + (version "0.0.13") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://gitlab.gnome.org/GNOME/libhandy") + (commit (string-append "v" version)))) + (file-name (git-file-name "libhandy" version)) + (sha256 + (base32 "1y23k623sjkldfrdiwfarpchg5mg58smcy1pkgnwfwca15wm1ra5")))) + (arguments + (substitute-keyword-arguments (package-arguments libhandy) + ((#:configure-flags flags) + '(list "-Dglade_catalog=disabled" "-Dgtk_doc=true")))))) + (define-public libgit2-glib (package (name "libgit2-glib") @@ -10897,7 +10932,7 @@ join_paths\\('build-aux', 'post_install.py'\\)\\)") ("json-glib" ,json-glib) ("libcanberra" ,libcanberra) ("libgee" ,libgee) - ("libhandy" ,libhandy) + ("libhandy" ,libhandy-0.0) ("libpeas" ,libpeas) ("libsecret" ,libsecret) ("libunwind" ,libunwind) @@ -11336,3 +11371,70 @@ environment (IDE) for writing GNOME-based software. It features fuzzy search, auto-completion, a mini code map, documentation browsing, Git integration, an integrated profiler via Sysprof, debugging support, and more.") (license license:gpl3+))) + +(define-public komikku + (package + (name "komikku") + (version "0.19.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://gitlab.com/valos/Komikku/") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "16d7k500nd9klnjqqcgk3glhv2sy78yndkz3n0x7lynvblsy45kk")))) + (build-system meson-build-system) + (arguments + `(#:glib-or-gtk? #t + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'patch-sources + (lambda _ + (substitute* "komikku/utils.py" + (("from komikku\\.servers import get_servers_list") + ;; code following that line should migrate old databases + ;; but the line itself results in an import error + "return data_dir_path")))) + (add-after 'unpack 'skip-gtk-update-icon-cache + (lambda _ + (substitute* "meson_post_install.py" + (("gtk-update-icon-cache") (which "true"))) + #t)) + (add-after 'glib-or-gtk-wrap 'python-and-gi-wrap + (lambda* (#:key outputs #:allow-other-keys) + (let ((prog (string-append (assoc-ref outputs "out") + "/bin/komikku"))) + (wrap-program prog + `("PYTHONPATH" = (,(getenv "PYTHONPATH"))) + `("GI_TYPELIB_PATH" = (,(getenv "GI_TYPELIB_PATH")))) + #t)))))) + (inputs + `(("gtk+" ,gtk+) + ("libhandy" ,libhandy) + ("libnotify" ,libnotify) + ("libsecret" ,libsecret) + ("python-beautifulsoup4" ,python-beautifulsoup4) + ("python-cloudscraper" ,python-cloudscraper) + ("python-dateparser" ,python-dateparser) + ("python-keyring" ,python-keyring) + ("python-lxml" ,python-lxml) + ("python-magic" ,python-magic) + ("python-pillow" ,python-pillow) + ("python-pure-protobuf" ,python-pure-protobuf) + ("python-pycairo" ,python-pycairo) + ("python-pygobject" ,python-pygobject) + ("python-unidecode" ,python-unidecode))) + (native-inputs + `(("desktop-file-utils" ,desktop-file-utils) + ("gettext" ,gettext-minimal) + ("glib:bin" ,glib "bin") + ("gobject-introspection" ,gobject-introspection) + ("pkg-config" ,pkg-config))) + (home-page "https://gitlab.com/valos/Komikku") + (synopsis "Manga reader for GNOME") + (description "Komikku is an online/offline manga reader for GNOME, +developed with the aim of being used with the Librem 5 phone.") + (license license:gpl3+))) diff --git a/gnu/packages/gnupg.scm b/gnu/packages/gnupg.scm index daf4bc3b6e..c0f827b7e3 100644 --- a/gnu/packages/gnupg.scm +++ b/gnu/packages/gnupg.scm @@ -2,7 +2,7 @@ ;;; Copyright © 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2013, 2015, 2018 Andreas Enge <andreas@enge.fr> ;;; Copyright © 2014, 2018 Eric Bavier <bavier@member.fsf.org> -;;; Copyright © 2014, 2015, 2016 Mark H Weaver <mhw@netris.org> +;;; Copyright © 2014, 2015, 2016, 2020 Mark H Weaver <mhw@netris.org> ;;; Copyright © 2015 Paul van der Walt <paul@denknerd.org> ;;; Copyright © 2015, 2016, 2017, 2018, 2019, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2015, 2016, 2017, 2019 Ricardo Wurmus <rekado@elephly.net> @@ -254,7 +254,7 @@ compatible to GNU Pth.") (define-public gnupg (package (name "gnupg") - (version "2.2.20") + (version "2.2.23") (source (origin (method url-fetch) (uri (string-append "mirror://gnupg/gnupg/gnupg-" version @@ -262,7 +262,7 @@ compatible to GNU Pth.") (patches (search-patches "gnupg-default-pinentry.patch")) (sha256 (base32 - "0c6a4v9p6qzhsw1pfcwc459bxpc8hma0w9z8iqb9khvligack9q4")))) + "0p6ss4f3vlkf91pmp27bmvfr5bdxxi0pb3dmxpqljglbsx4mxd8h")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) @@ -400,23 +400,14 @@ libskba (working with X.509 certificates and CMS data).") (define-public gpgme (package (name "gpgme") - (version "1.13.1") + (version "1.14.0") (source (origin (method url-fetch) (uri (string-append "mirror://gnupg/gpgme/gpgme-" version ".tar.bz2")) (sha256 - (base32 "0imyjfryvvjdbai454p70zcr95m94j9xnzywrlilqdw2fqi0pqy4")))) + (base32 "01s3rlspykbm9vmi5rfbdm3d20ip6yni69r48idqzlmhlq8ggwff")))) (build-system gnu-build-system) - (arguments - `(#:phases - (modify-phases %standard-phases - (add-before 'check 'disable-failing-test - ;; XXX gnupg@2.2.20 breaks the expected JSON response for this test. - (lambda _ - (substitute* "tests/json/t-json.c" - (("\"t-keylist-secret\", ") "")) - #t))))) (native-inputs `(("gnupg" ,gnupg))) (propagated-inputs @@ -877,6 +868,8 @@ enter a passphrase when required by @code{gpg} or other software."))) (package (inherit pinentry-tty) (name "pinentry-gtk2") + (arguments + `(#:configure-flags '("--enable-fallback-curses"))) (inputs `(("gtk+" ,gtk+-2) ("glib" ,glib) @@ -895,7 +888,8 @@ passphrase when @code{gpg} is run and needs it."))) ("glib" ,glib) ,@(package-inputs pinentry-tty))) (arguments - `(#:configure-flags '("--enable-pinentry-gnome3"))) + `(#:configure-flags '("--enable-pinentry-gnome3" + "--enable-fallback-curses"))) (description "Pinentry provides a console and a GUI designed for use with GNOME@tie{}3 that allows users to enter a passphrase when required by @code{gpg} or other @@ -905,6 +899,8 @@ software."))) (package (inherit pinentry-tty) (name "pinentry-qt") + (arguments + `(#:configure-flags '("--enable-fallback-curses"))) (inputs `(("qtbase" ,qtbase) ,@(package-inputs pinentry-tty))) @@ -921,7 +917,8 @@ passphrase when @code{gpg} is run and needs it."))) (inherit (package-source pinentry-tty)) (patches (search-patches "pinentry-efl.patch")))) (arguments - '(#:configure-flags '("--enable-pinentry-efl") + '(#:configure-flags '("--enable-pinentry-efl" + "--enable-fallback-curses") #:phases (modify-phases %standard-phases (replace 'bootstrap diff --git a/gnu/packages/gnuzilla.scm b/gnu/packages/gnuzilla.scm index fa18f2927c..7d6ed6b11a 100644 --- a/gnu/packages/gnuzilla.scm +++ b/gnu/packages/gnuzilla.scm @@ -1139,11 +1139,11 @@ standards of the IceCat project.") (cpe-version . ,(first (string-split version #\-))))))) ;; Update this together with icecat! -(define %icedove-build-id "20200726000000") ;must be of the form YYYYMMDDhhmmss +(define %icedove-build-id "20200825000000") ;must be of the form YYYYMMDDhhmmss (define-public icedove (package (name "icedove") - (version "68.11.0") + (version "68.12.0") (source icecat-source) (properties `((cpe-name . "thunderbird_esr"))) @@ -1429,7 +1429,7 @@ standards of the IceCat project.") ;; in the Thunderbird release tarball. We don't use the release ;; tarball because it duplicates the Icecat sources and only adds the ;; "comm" directory, which is provided by this repository. - ,(let ((changeset "a247645d951bcedb356a0d9f273e878a7d4d2180")) + ,(let ((changeset "b41cdff70b185358d9c4c1d4a36cfad15a24f001")) (origin (method hg-fetch) (uri (hg-reference @@ -1438,7 +1438,7 @@ standards of the IceCat project.") (file-name (string-append "thunderbird-" version "-checkout")) (sha256 (base32 - "0nf7ic1sw7yawnwrxwm3b4yl2cn4hp8szzh0xd462s1hjm59ksjl"))))) + "1xvky8p5r41mxdyg9amydy94p51wmmdwdz0zq2vzspr9viixf7xm"))))) ("autoconf" ,autoconf-2.13) ("cargo" ,rust "cargo") ("clang" ,clang) diff --git a/gnu/packages/golang.scm b/gnu/packages/golang.scm index 78bf4fff87..8723592b51 100644 --- a/gnu/packages/golang.scm +++ b/gnu/packages/golang.scm @@ -18,6 +18,7 @@ ;;; Copyright © 2019, 2020 Arun Isaac <arunisaac@systemreboot.net> ;;; Copyright © 2020 Jack Hill <jackhill@jackhill.us> ;;; Copyright © 2020 Jakub Kądziołka <kuba@kadziolka.net> +;;; Copyright © 2020 Nicolas Goaziou <mail@nicolasgoaziou.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -1047,6 +1048,30 @@ Features include: optimized for performance yet simple to use.") (license license:expat)))) +(define-public go-github-com-tv42-httpunix + (let ((commit "2ba4b9c3382c77e7b9ea89d00746e6111d142a22") + (revision "0")) + (package + (name "go-github-com-tv42-httpunix") + (version (git-version "0.0.0" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/tv42/httpunix.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0xbwpip2hsfhd2kd878jn5ndl8y1i9658lggha4x3xb5m1rsds9w")))) + (build-system go-build-system) + (arguments + '(#:import-path "github.com/tv42/httpunix")) + (home-page "https://github.com/tv42/httpunix") + (synopsis "Go library to talk HTTP over Unix domain sockets") + (description "This package is a Go library to talk HTTP over Unix domain +sockets.") + (license license:expat)))) + (define-public go-github-com-blang-semver (let ((commit "60ec3488bfea7cca02b021d106d9911120d25fe9") (revision "0")) @@ -4180,7 +4205,7 @@ data serialization format.") (define-public go-github-com-mattn-go-zglob (package (name "go-github-com-mattn-go-zglob") - (version "0.0.1") + (version "0.0.3") (source (origin (method git-fetch) (uri (git-reference @@ -4189,7 +4214,7 @@ data serialization format.") (file-name (git-file-name name version)) (sha256 (base32 - "1sncdyq5fbd42al4amyy91h7vlzm3wm6c9vl8za2pjgfgsd581fz")))) + "1923lvakm66mzy62jmngdvcmbmiqclinsvnghs3907rgygnx1qc1")))) (build-system go-build-system) (arguments `(#:import-path "github.com/mattn/go-zglob")) diff --git a/gnu/packages/gpodder.scm b/gnu/packages/gpodder.scm index 734599483b..26ea15ba56 100644 --- a/gnu/packages/gpodder.scm +++ b/gnu/packages/gpodder.scm @@ -38,7 +38,7 @@ (define-public gpodder (package (name "gpodder") - (version "3.10.15") + (version "3.10.16") (source (origin (method git-fetch) @@ -47,8 +47,9 @@ (commit version))) (sha256 (base32 - "0ghbanj142n0hgydzfjmnkdgri2kswsjal3mn10c723kih4ir4yr")) - (file-name (git-file-name name version)))) + "0pbpaasd7kj6y25nm45y1qyb9sxd4570f7g6zkfcpf6pa3nx7qkq")) + (file-name (git-file-name name version)) + (patches (search-patches "gpodder-disable-updater.patch")))) (build-system python-build-system) (native-inputs `(("intltool" ,intltool) diff --git a/gnu/packages/graph.scm b/gnu/packages/graph.scm index 800b567e39..a307fee808 100644 --- a/gnu/packages/graph.scm +++ b/gnu/packages/graph.scm @@ -121,63 +121,6 @@ more.") (home-page "https://pypi.org/project/python-igraph/") (synopsis "Python bindings for the igraph network analysis library"))) -(define-public r-igraph - (package - (name "r-igraph") - (version "1.2.5") - (source - (origin - (method url-fetch) - (uri (cran-uri "igraph" version)) - (sha256 - (base32 - "126z1ygbmi3g7hk97snf22rnx680dyi30idssm5zacba5rdngp8c")))) - (build-system r-build-system) - (native-inputs - `(("gfortran" ,gfortran))) - (inputs - `(("gmp" ,gmp) - ("glpk" ,glpk) - ("libxml2" ,libxml2) - ("zlib" ,zlib))) - (propagated-inputs - `(("r-magrittr" ,r-magrittr) - ("r-matrix" ,r-matrix) - ("r-pkgconfig" ,r-pkgconfig))) - (home-page "https://igraph.org") - (synopsis "Network analysis and visualization") - (description - "This package provides routines for simple graphs and network analysis. -It can handle large graphs very well and provides functions for generating -random and regular graphs, graph visualization, centrality methods and much -more.") - (license license:gpl2+))) - -(define-public r-diffusionmap - (package - (name "r-diffusionmap") - (version "1.2.0") - (source - (origin - (method url-fetch) - (uri (cran-uri "diffusionMap" version)) - (sha256 - (base32 - "1rvk7069brlm1s9kqj4c31mwwr3mw4hmhay95cjjjfmw5xclff2j")))) - (properties `((upstream-name . "diffusionMap"))) - (build-system r-build-system) - (propagated-inputs - `(("r-igraph" ,r-igraph) - ("r-matrix" ,r-matrix) - ("r-scatterplot3d" ,r-scatterplot3d))) - (home-page "https://www.r-project.org") - (synopsis "Diffusion map") - (description "This package implements the diffusion map method of data -parametrization, including creation and visualization of diffusion maps, -clustering with diffusion K-means and regression using the adaptive regression -model.") - (license license:gpl2))) - (define-public r-rgraphviz (package (name "r-rgraphviz") diff --git a/gnu/packages/graphics.scm b/gnu/packages/graphics.scm index 35b96351ba..cf52984183 100644 --- a/gnu/packages/graphics.scm +++ b/gnu/packages/graphics.scm @@ -824,7 +824,7 @@ other vector formats such as: (define-public ogre (package (name "ogre") - (version "1.12.5") + (version "1.12.6") (source (origin (method git-fetch) @@ -834,7 +834,7 @@ other vector formats such as: (recursive? #t))) ;for Dear ImGui submodule (file-name (git-file-name name version)) (sha256 - (base32 "1sx0jsw4kmb4ycf62bgx3ygwv8k1cgjx52y47d7dk07z6gk6wpyj")))) + (base32 "1ap3krrl55hswv1n2r3ijf3xrb3kf9dnqvwyrc0fgnc7j7vd45sk")))) (build-system cmake-build-system) (arguments '(#:phases @@ -1208,7 +1208,7 @@ realistic reflections, shading, perspective and other effects.") ("python" ,python-2) ("cython" ,python2-cython))) (native-inputs - `(("pandoc" ,ghc-pandoc) + `(("pandoc" ,pandoc) ("bison" ,bison) ("flex" ,flex) ("doxygen" ,doxygen) diff --git a/gnu/packages/gtk.scm b/gnu/packages/gtk.scm index 9958fbadf1..ff8547d00b 100644 --- a/gnu/packages/gtk.scm +++ b/gnu/packages/gtk.scm @@ -229,7 +229,7 @@ affine transformation (scale, rotation, shear, etc.).") (define-public libdatrie (package (name "libdatrie") - (version "0.2.11") + (version "0.2.12") (source (origin (method url-fetch) @@ -237,7 +237,7 @@ affine transformation (scale, rotation, shear, etc.).") (string-append "https://linux.thai.net/pub/ThaiLinux/software/" "libthai/libdatrie-" version ".tar.xz")) (sha256 - (base32 "0jz9k0dd8jim4iyk5xrhkkdm4zq2ly6aw317ydjss44ymg97nz2l")))) + (base32 "0jdi01pcxv0b24zbjy7zahawsqqqw4mv94f2yy01zh4n796wqba5")))) (build-system gnu-build-system) (outputs '("out" "doc")) (arguments @@ -916,14 +916,14 @@ application suites.") (define-public guile-cairo (package (name "guile-cairo") - (version "1.10.0") + (version "1.11.1") (source (origin (method url-fetch) (uri (string-append "mirror://savannah/guile-cairo/guile-cairo-" version ".tar.gz")) (sha256 (base32 - "0p6xrhf2k6n5dybn88050za7h90gnd7534n62l53vsca187pwgdf")) + "1gc642r9ndsjhhmh9bl5cbd3dwvy4dpxwhr0zpsw43y9nmz37xpl")) (modules '((guix build utils))) (snippet (begin @@ -945,7 +945,8 @@ application suites.") (arguments ;; Uses of 'scm_t_uint8' & co. are deprecated; don't stop the build ;; because of them. - '(#:configure-flags '("--disable-Werror"))) + '(#:configure-flags '("--disable-Werror") + #:make-flags '("GUILE_AUTO_COMPILE=0"))) ; to prevent guild warnings (inputs `(("guile-lib" ,guile-lib) ("expat" ,expat) diff --git a/gnu/packages/guile-xyz.scm b/gnu/packages/guile-xyz.scm index b8c104993f..3090c6078b 100644 --- a/gnu/packages/guile-xyz.scm +++ b/gnu/packages/guile-xyz.scm @@ -798,6 +798,7 @@ using Guile's foreign function interface.") (build-system guile-build-system) (arguments '(#:source-directory "src" + #:compile-flags '("--r6rs" "-Wunbound-variable" "-Warity-mismatch") #:phases (modify-phases %standard-phases (add-after 'unpack 'move-files-around (lambda _ @@ -806,8 +807,7 @@ using Guile's foreign function interface.") (mkdir-p "src/pfds") (for-each (lambda (file) (rename-file file - (string-append "src/pfds/" - file))) + (string-append "src/pfds/" file))) '("bbtrees.sls" "deques" "deques.sls" @@ -821,15 +821,6 @@ using Guile's foreign function interface.") "queues.sls" "sequences.sls" "sets.sls")) - - ;; In Guile <= 2.2.4, there's no way to tell 'guild - ;; compile' to accept the ".sls" extension. So... - (for-each (lambda (file) - (rename-file file - (string-append - (string-drop-right file 4) - ".scm"))) - (find-files "." "\\.sls$")) #t))))) (native-inputs `(("guile" ,guile-3.0))) @@ -853,6 +844,36 @@ Vicare Scheme and IronScheme. Right now it contains: @end itemize\n") (license license:bsd-3))) +(define-public guile-prometheus + (let ((commit "cbc6e1b03512443a03d66414c426adb8470b5f2b") + (revision "0")) + (package + (name "guile-prometheus") + (version (git-version "0" revision commit)) + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://git.cbaines.net/git/guile/prometheus") + (commit commit))) + (sha256 + (base32 + "1k1qg4ia87w2ipnf8cpikdc67lxi5bmahkhgk2x0i9ibdyvqb7np")) + (file-name (string-append name "-" version "-checkout")))) + (build-system gnu-build-system) + (native-inputs + `(("pkg-config" ,pkg-config) + ("autoconf" ,autoconf) + ("automake" ,automake))) + (inputs + `(("guile" ,guile-3.0))) + (home-page "https://git.cbaines.net/guile/prometheus") + (synopsis "Prometheus client library for Guile") + (description + "This Guile library provides instrumentation code intended to be used +with the Prometheus time series service. Counter, gauge and histogram metric +types are supported.") + (license license:gpl3+)))) + (define-public guile2.2-pfds (package (inherit guile-pfds) @@ -862,7 +883,18 @@ Vicare Scheme and IronScheme. Right now it contains: (substitute-keyword-arguments (package-arguments guile-pfds) ((#:phases phases) `(modify-phases ,phases - (delete 'work-around-guile-bug))))))) + (delete 'work-around-guile-bug) + (add-after 'move-files-around 'sls->scm + (lambda _ + ;; In Guile <= 2.2.4, there's no way to tell 'guild + ;; compile' to accept the ".sls" extension. So... + (for-each (lambda (file) + (rename-file file + (string-append + (string-drop-right file 4) + ".scm"))) + (find-files "." "\\.sls$")) + #t)))))))) (define-public guile3.0-pfds (deprecated-package "guile3.0-pfds" guile-pfds)) @@ -1729,19 +1761,20 @@ capabilities.") (license license:gpl3+))) (define-public g-golf - (let ((commit "5d2903afb4b6b65c22f587835d8fdff91916e5ee")) + (let ((commit "84e894eb7945c3bcdf7f8d5135c1be3efa524c92") + (revision "822")) (package (name "g-golf") - (version (git-version "1" "804" commit)) - (source (origin - (method git-fetch) - (uri (git-reference - (url "https://git.savannah.gnu.org/git/g-golf.git") - (commit commit))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "1xkb6a5d3i9s8lpb5cf06bd64p5srqnnhn5l0b2f5csbvyz8hmmh")))) + (version (git-version "0.1.0" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://git.savannah.gnu.org/git/g-golf.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1pkcij65zy2lkip5yrfzj85nq17pp9mrf0d4sk6hpjqr4kd0bxd5")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) @@ -2437,11 +2470,11 @@ The picture values can directly be displayed in Geiser.") guile-picture-language)) (define-public guile-studio - (let ((commit "d24d59a68e3f1fa9477e3430fc48a2efe97b805d") + (let ((commit "5c05b03e8a5c450f7358ceec7ea602f29c49d54e") (revision "1")) (package (name "guile-studio") - (version (git-version "0.0.2" revision commit)) + (version (git-version "0.0.3" revision commit)) (source (origin (method git-fetch) (uri (git-reference @@ -2450,7 +2483,7 @@ The picture values can directly be displayed in Geiser.") (file-name (git-file-name name version)) (sha256 (base32 - "0kqi0q8a7si65n21b7gn8vbninwcg0fqy5hmvy3l1bi6iync20zr")))) + "11wyf6x7mhyhimv0cd57pl39zgav9hc9ljqi3g2g35b264hylpnx")))) (build-system gnu-build-system) (arguments `(#:modules @@ -2487,6 +2520,7 @@ The picture values can directly be displayed in Geiser.") ("emacs-geiser" ,emacs-geiser) ("emacs-company" ,emacs-company) ("emacs-flycheck" ,emacs-flycheck) + ("emacs-flycheck-guile" ,emacs-flycheck-guile) ("emacs-smart-mode-line" ,emacs-smart-mode-line) ("emacs-paren-face" ,emacs-paren-face) ("adwaita-icon-theme" ,adwaita-icon-theme))) @@ -2827,6 +2861,36 @@ parameters, which define* and lambda* special forms") denote the invalidity of certain code paths in a Scheme program.") (license license:gpl3+))) +(define-public guile-srfi-158 + (package + (name "guile-srfi-158") + (version "0.0.1") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://gitlab.com/mjbecze/guile-srfi-158.git") + (commit version))) + (sha256 + (base32 + "0b8hlv1bldbcwkcxi9y8mm6xp5gbgpg7b15bwqxv70iynl9d9a7c")) + (file-name (git-file-name name version)))) + (build-system gnu-build-system) + (native-inputs + `(("autoconf" ,autoconf) + ("automake" ,automake) + ("pkg-config" ,pkg-config))) + (inputs + `(("guile" ,guile-3.0))) + (home-page "https://gitlab.com/samplet/guile-srfi-158") + (synopsis "SRFI 158 (Generators and Accumulators) for Guile") + (description "This package provides an implementation of SRFI 158 +for Guile. SRFI 158 defines utility procedures that create, +transform, and consume generators. It also defines procedures that +return accumulators. It is implemented by wrapping the sample +implementation in a thin Guile compatibility layer.") + (license license:gpl3+))) + (define-public guile-srfi-159 (let ((commit "1bd98abda2ae4ef8f36761a167903e55c6bda7bb") (revision "0")) @@ -2857,6 +2921,45 @@ formatting combinators specified by more expressive and flexible than the traditional @code{format} procedure.") (license license:bsd-3)))) +(define-public guile-srfi-180 + (let ((commit "9188bf9724c6d320ef804579d222e855b007b193") + (revision "0")) + (package + (name "guile-srfi-180") + (version (git-version "0" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/scheme-requests-for-implementation/srfi-180.git") + (commit commit))) + (sha256 + (base32 + "08lf70rsak8mwfij55xc37pg9zg7c87fizmhz7ln46skzj68sl3y")) + (modules '((guix build utils))) + (snippet + '(begin + (delete-file-recursively "srfi/files") + (delete-file "srfi/run-r7rs-checks.guile.scm") + (delete-file "srfi/run-r7rs-checks.scm") + (delete-file "srfi/check.scm") + #t)) + (file-name (git-file-name name version)))) + (build-system guile-build-system) + (arguments + '(#:not-compiled-file-regexp "body\\.scm$")) + (native-inputs + `(("guile" ,guile-3.0))) + (propagated-inputs + `(("guile-srfi-145" ,guile-srfi-145))) + (home-page "https://srfi.schemers.org/srfi-180/") + (synopsis "JSON parser and printer for Guile") + (description + "This library implements a JavaScript Object Notation (JSON) parser and printer. +It also supports parsing JSON objects that may be bigger than memory with a streaming +API.") + (license license:expat)))) + (define-public emacsy (package (name "emacsy") @@ -2939,20 +3042,20 @@ in C using Gtk+-3 and WebKitGtk.") (license license:gpl3+))) (define-public emacsy-minimal - (let ((commit "v0.4.1-28-gd459ca1")) + (let ((commit "v0.4.1-31-g415d96f")) (package (inherit emacsy) (name "emacsy-minimal") (version (string-drop commit 1)) - (source (origin - (method git-fetch) - (uri (git-reference - (url "https://git.savannah.gnu.org/git/emacsy.git") - (commit commit))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "1ps15w8cxj9kc18gmvys9jv9xa1qqa7m43ismv34l3cmhddrn0sr")))) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://git.savannah.gnu.org/git/emacsy.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1cs1i1hxwrv0a512j54yrvfh743nci1chx6qjgp4jyzq98ncvxgg")))) (build-system gnu-build-system) (inputs `(("guile" ,guile-2.2) @@ -2963,10 +3066,10 @@ in C using Gtk+-3 and WebKitGtk.") `(#:configure-flags '("--without-examples") #:phases (modify-phases %standard-phases - (add-before 'configure 'setenv - (lambda _ - (setenv "GUILE_AUTO_COMPILE" "0") - #t)))))))) + (add-before 'configure 'setenv + (lambda _ + (setenv "GUILE_AUTO_COMPILE" "0") + #t)))))))) (define-public guile-jpeg (let ((commit "6a1673578b297c2c1b28e44a76bd5c49e76a5046") @@ -3005,16 +3108,16 @@ perform geometrical transforms on JPEG images.") (define-public nomad (package (name "nomad") - (version "0.2.0-alpha") + (version "0.2.0-alpha-100-g6a565d3") (source (origin (method git-fetch) (uri (git-reference - (url "https://git.savannah.gnu.org/git/nomad.git") + (url "https://git.savannah.gnu.org/git/nomad.git/") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 - "1z2z5x37v1qrk2vb8qlz2yj030iirzzd0maa9fjxzlqkrg6krbaj")))) + "0anmprm63a88kii251rl296v1g4iq62r6n4nssx5jbc0hzkknanz")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) @@ -3025,36 +3128,35 @@ perform geometrical transforms on JPEG images.") ("guile" ,guile-2.2) ("glib:bin" ,glib "bin") ("texinfo" ,texinfo) + ("gettext" ,gnu-gettext) ("perl" ,perl))) (inputs - `(("guile" ,guile-2.2) + `(;; Guile + ("guile" ,guile-2.2) ("guile-lib" ,guile2.2-lib) ("guile-readline" ,guile2.2-readline) ("guile-gcrypt" ,guile2.2-gcrypt) ("gnutls" ,gnutls) + ("g-golf" ,g-golf) ("shroud" ,shroud) ("emacsy" ,emacsy-minimal) + ;; Gtk ("glib" ,glib) ("dbus-glib" ,dbus-glib) + ("glib-networking" ,glib-networking) ("gtk+" ,gtk+) ("gtk+:bin" ,gtk+ "bin") - ("gtksourceview" ,gtksourceview) ("webkitgtk" ,webkitgtk) - ("g-golf" ,g-golf) - ("xorg-server" ,xorg-server))) - (propagated-inputs - `(("glib" ,glib) - ("glib-networking" ,glib-networking) + ("gtksourceview" ,gtksourceview) + ("vte" ,vte) + ;; Gstreamer ("gstreamer" ,gstreamer) ("gst-plugins-base" ,gst-plugins-base) ("gst-plugins-good" ,gst-plugins-good) ("gst-plugins-bad" ,gst-plugins-bad) ("gst-plugins-ugly" ,gst-plugins-ugly) - ("gtk+" ,gtk+) - ("gtksourceview" ,gtksourceview) - ("vte" ,vte) - ("webkitgtk" ,webkitgtk) - ("gsettings-desktop-schemas" ,gsettings-desktop-schemas))) + ;; Util + ("xorg-server" ,xorg-server))) (arguments `(#:modules ((guix build gnu-build-system) (guix build utils) @@ -3072,49 +3174,40 @@ perform geometrical transforms on JPEG images.") #t)) (add-after 'install 'wrap-binaries (lambda* (#:key inputs outputs #:allow-other-keys) - (let* ((out (assoc-ref outputs "out")) - (gio-deps (map (cut assoc-ref inputs <>) - '("glib-networking" - "glib" - "gstreamer" - "gst-plugins-base" - "gst-plugins-good" - "gst-plugins-bad" - "gst-plugins-ugly"))) - (gio-mod-path (map (cut string-append <> - "/lib/gio/modules") - gio-deps)) - (effective (read-line (open-pipe* - OPEN_READ - "guile" "-c" - "(display (effective-version))"))) - (deps (map (cut assoc-ref inputs <>) - '("emacsy" "guile-lib" "guile-readline" - "g-golf" "shroud"))) - (scm-path (map (cut string-append <> - "/share/guile/site/" effective) - `(,out ,@deps))) - (go-path (map (cut string-append <> - "/lib/guile/" effective "/site-ccache") - `(,out ,@deps))) - (progs (map (cut string-append out "/bin/" <>) - '("nomad")))) - (map (cut wrap-program <> - `("GIO_EXTRA_MODULES" ":" prefix ,gio-mod-path) - `("GUILE_LOAD_PATH" ":" prefix ,scm-path) - `("GUILE_LOAD_COMPILED_PATH" ":" - prefix ,go-path)) - progs) + (let* ((out (assoc-ref outputs "out")) + (effective (read-line (open-pipe* + OPEN_READ + "guile" "-c" + "(display (effective-version))"))) + (gst-plugins (map (lambda (i) + (string-append (assoc-ref inputs i) + "/lib/gstreamer-1.0")) + `("gstreamer" + "gst-plugins-base" + "gst-plugins-good" + "gst-plugins-bad" + "gst-plugins-ugly"))) + (out-append (lambda (. args) + (apply string-append out args))) + (gi-path (out-append "/lib/girepository-1.0")) + (load-path (out-append "/share/guile/site/" effective)) + (comp-path (out-append "/lib/guile/" + effective "/site-ccache")) + (ext-path (out-append "/libexec/nomad"))) + (wrap-program (string-append out "/bin/nomad") + `("GUILE_LOAD_PATH" ":" prefix + (,load-path + ,(getenv "GUILE_LOAD_PATH"))) + `("GUILE_LOAD_COMPILED_PATH" ":" prefix + (,comp-path + ,(getenv "GUILE_LOAD_COMPILED_PATH"))) + `("GI_TYPELIB_PATH" ":" prefix + (,gi-path ,(getenv "GI_TYPELIB_PATH"))) + `("GIO_EXTRA_MODULES" ":" prefix + (,(getenv "GIO_EXTRA_MODULES"))) + `("GST_PLUGIN_SYSTEM_PATH" ":" prefix ,gst-plugins) + `("NOMAD_WEB_EXTENSION_DIR" ":" prefix (,ext-path))) #t)))))) - (native-search-paths - (list (search-path-specification - (variable "GI_TYPELIB_PATH") - (separator ":") - (files '("lib/girepository-1.0"))) - (search-path-specification - (variable "NOMAD_WEB_EXTENSION_DIR") - (separator ":") - (files '("libexec/nomad"))))) (home-page "https://savannah.nongnu.org/projects/nomad/") (synopsis "Extensible Web Browser in Guile Scheme") (description "Nomad is a Emacs-like web browser that consists of a modular @@ -3774,3 +3867,141 @@ between data, in a way that is very similar to WikiData or RDF for instance. An object can have relations (in the form of an IRI) that relates it to one or more objects or strings, represented by a Json object or an IRI.") (license license:gpl3+))) + +(define-public guile-struct-pack + (package + (name "guile-struct-pack") + (version "1.1.1") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/weinholt/struct-pack") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0hd72m821pahjphzyjn26i55542v8makr55xzjll2cycja4wsbc1")))) + (build-system guile-build-system) + (arguments + `(#:compile-flags '("--r6rs" "-Wunbound-variable" "-Warity-mismatch") + #:modules ((guix build guile-build-system) + (guix build utils) + (srfi srfi-26) + (ice-9 ftw)) + #:phases (modify-phases %standard-phases + (add-before 'build 'move-sls-files + (lambda _ + ;; Move files under a struct/ directory to reflect the + ;; module hierarchy. + (define dst-folder "struct") + (define (target file) + (string-append dst-folder "/" file)) + (define files + (scandir "." (negate (cut member <> '("." ".."))))) + (mkdir dst-folder) + (for-each (lambda (file) + (rename-file file (target file))) + files) + #t))))) + (native-inputs + `(("guile" ,guile-3.0))) + (home-page "https://github.com/weinholt/struct-pack") + (synopsis "R6RS library for working with packed byte structures") + (description + "This is an R6RS library for working with packed byte structures. It is +similar to struct in Python or pack and unpack in Perl.") + (license license:expat))) + +(define-public guile-machine-code + (package + (name "guile-machine-code") + (version "2.1.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/weinholt/machine-code") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0wzj3caj2jypzyjqfkfqkvr3kkbjabsnhldv9kvnx9w9qnria5yd")))) + (build-system guile-build-system) + (arguments + `(#:compile-flags '("--r6rs" "-Wunbound-variable" "-Warity-mismatch") + #:modules ((guix build guile-build-system) + (guix build utils) + (srfi srfi-26) + (ice-9 ftw)) + #:phases (modify-phases %standard-phases + (add-before 'build 'move-sls-files + (lambda _ + ;; Move files under a struct/ directory to reflect the + ;; module hierarchy. + (define dst-folder "machine-code") + (define (target file) + (string-append dst-folder "/" file)) + (define files + (scandir "." (negate (cut member <> '("." ".."))))) + (mkdir dst-folder) + (for-each (lambda (file) + (rename-file file (target file))) + files) + #t))))) + (native-inputs + `(("guile" ,guile-3.0))) + (propagated-inputs + `(("guile-struct-pack" ,guile-struct-pack))) + (home-page "https://github.com/weinholt/machine-code") + (synopsis "Tools that relate to machine code and object formats") + (description + "This project is about the development of tools that relate to machine +code and object formats; for all architectures. Here you'll find libraries +for working with binary code: assembly, disassembly, instruction tables, +object formats and related areas.") + (license license:expat))) + +(define-public guile-laesare + (package + (name "guile-laesare") + (version "1.0.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/weinholt/laesare") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "15q619gzw717r8r1ql23zfdaibpnp9qqs96032vdc3rj74msxc92")))) + (build-system guile-build-system) + (arguments + `(#:compile-flags '("--r6rs" "-Wunbound-variable" "-Warity-mismatch") + #:modules ((guix build guile-build-system) + (guix build utils) + (srfi srfi-26) + (ice-9 ftw)) + #:phases (modify-phases %standard-phases + (add-before 'build 'move-sls-files + (lambda _ + ;; Move files under a laesare directory to reflect + ;; the module hierarchy. + (define dst-folder "laesare") + (define (target file) + (string-append dst-folder "/" file)) + (define files + (scandir "." (negate (cut member <> '("." ".."))))) + (mkdir dst-folder) + (for-each (lambda (file) + (rename-file file (target file))) + files) + #t))))) + (native-inputs + `(("guile" ,guile-3.0))) + (home-page "https://github.com/weinholt/laesare") + (synopsis "R6RS Scheme library that provides a reader") + (description + "This is an R6RS Scheme library that provides a reader with some extra +features not found in the standard read procedure such as a compatible mode +with support for other RnRS standards and a tolerant mode that continues on +errors.") + (license license:expat))) diff --git a/gnu/packages/haskell-apps.scm b/gnu/packages/haskell-apps.scm index 2a63712083..07bf26669b 100644 --- a/gnu/packages/haskell-apps.scm +++ b/gnu/packages/haskell-apps.scm @@ -12,7 +12,7 @@ ;;; Copyright © 2019, 2020 Kyle Meyer <kyle@kyleam.com> ;;; Copyright © 2015 John Soo <jsoo1@asu.edu> ;;; Copyright © 2019, 2020 Efraim Flashner <efraim@flashner.co.il> -;;; Copyright © 2019 Alex Griffin <a@ajgrf.com> +;;; Copyright © 2019, 2020 Alex Griffin <a@ajgrf.com> ;;; Copyright © 2020 Alexandru-Sergiu Marton <brown121407@member.fsf.org> ;;; Copyright © 2020 Brian Leung <bkleung89@gmail.com> ;;; @@ -339,18 +339,18 @@ to @code{cabal repl}).") (define-public git-annex (package (name "git-annex") - (version "8.20200810") + (version "8.20200908") (source (origin (method url-fetch) (uri (string-append "https://hackage.haskell.org/package/" "git-annex/git-annex-" version ".tar.gz")) (sha256 - (base32 "1wy6ckcf5f6m94gakg1504h1zryail3mmj85sglq03s45vawjcg6")))) + (base32 "1113inl10f4m0699ba2zglaqlfqvwhqjkqg6r6m1d5rqv5brswb1")))) (build-system haskell-build-system) (arguments `(#:configure-flags - '("--flags=-Android -Assistant -Pairing -Webapp -WebDAV") + '("--flags=-Android -Assistant -Pairing -Webapp") #:phases (modify-phases %standard-phases (add-before 'configure 'patch-shell-for-tests @@ -448,6 +448,7 @@ to @code{cabal repl}).") ("ghc-crypto-api" ,ghc-crypto-api) ("ghc-cryptonite" ,ghc-cryptonite) ("ghc-data-default" ,ghc-data-default) + ("ghc-dav" ,ghc-dav) ("ghc-disk-free-space" ,ghc-disk-free-space) ("ghc-dlist" ,ghc-dlist) ("ghc-edit-distance" ,ghc-edit-distance) @@ -627,7 +628,7 @@ and mIRC chat codes.") (define-public kmonad (package (name "kmonad") - (version "0.3.0") + (version "0.4.0") (source (origin (method git-fetch) @@ -636,7 +637,7 @@ and mIRC chat codes.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "1g40nkpldih6h1rlxjx5yf9iavr3qs1f2b6j0gd8135p5hkg8d8n")))) + (base32 "064gnzzcm6fnxfiildbjmgbdxkhqvp61zrl6qhkl1pgbn27j1mll")))) (build-system haskell-build-system) (arguments `(#:phases @@ -661,7 +662,7 @@ and mIRC chat codes.") (doc (string-append out "/share/doc/kmonad-" ,version))) (install-file "README.md" doc) (copy-recursively "doc" doc) - (copy-recursively "example" (string-append doc "/example")) + (copy-recursively "keymap" (string-append doc "/keymap")) #t)))))) (inputs `(("ghc-cereal" ,ghc-cereal) @@ -670,6 +671,8 @@ and mIRC chat codes.") ("ghc-lens" ,ghc-lens) ("ghc-megaparsec" ,ghc-megaparsec) ("ghc-optparse-applicative" ,ghc-optparse-applicative) + ("ghc-resourcet" ,ghc-resourcet) + ("ghc-rio" ,ghc-rio) ("ghc-unagi-chan" ,ghc-unagi-chan) ("ghc-unliftio" ,ghc-unliftio) ("ghc-unordered-containers" ,ghc-unordered-containers))) @@ -772,7 +775,7 @@ too slow and you'll get wound up in the scroll and crushed.") (define-public shellcheck (package (name "shellcheck") - (version "0.7.0") + (version "0.7.1") (source (origin (method url-fetch) @@ -780,7 +783,7 @@ too slow and you'll get wound up in the scroll and crushed.") "https://hackage.haskell.org/package/ShellCheck/ShellCheck-" version ".tar.gz")) (sha256 - (base32 "1vx895cp5k5h0680xfwj74lk97m9y627n965x6srds0gfnbkzy9s")) + (base32 "06m4wh891nah3y0br4wh3adpsb16zawkb2ijgf1vcz61fznj6ps1")) (file-name (string-append name "-" version ".tar.gz")))) (build-system haskell-build-system) (inputs diff --git a/gnu/packages/haskell-web.scm b/gnu/packages/haskell-web.scm index b9474c973a..98d163566c 100644 --- a/gnu/packages/haskell-web.scm +++ b/gnu/packages/haskell-web.scm @@ -9,6 +9,7 @@ ;;; Copyright © 2019 John Soo <jsoo1@asu.edu> ;;; Copyright © 2020 Alexandru-Sergiu Marton <brown121407@gmail.com> ;;; Copyright © 2020 Marius Bakke <marius@gnu.org> +;;; Copyright © 2020 Kyle Meyer <kyle@kyleam.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -1945,3 +1946,38 @@ as frontend to hjsmin.") "This package provides a data type and ToJSON/FromJSON instances for Bower's package manifest file, bower.json.") (license license:expat))) + +(define-public ghc-dav + (package + (name "ghc-dav") + (version "1.3.4") + (source + (origin + (method url-fetch) + (uri (string-append "https://hackage.haskell.org/package/DAV/DAV-" + version ".tar.gz")) + (sha256 + (base32 "1isvi4fahq70lzxfz23as7qzkc01g7kba568l6flrgd0j1984fsy")))) + (build-system haskell-build-system) + (inputs + `(("ghc-case-insensitive" ,ghc-case-insensitive) + ("ghc-data-default" ,ghc-data-default) + ("ghc-exceptions" ,ghc-exceptions) + ("ghc-http-client" ,ghc-http-client) + ("ghc-http-client-tls" ,ghc-http-client-tls) + ("ghc-http-types" ,ghc-http-types) + ("ghc-lens" ,ghc-lens) + ("ghc-transformers-base" ,ghc-transformers-base) + ("ghc-transformers-compat" ,ghc-transformers-compat) + ("ghc-utf8-string" ,ghc-utf8-string) + ("ghc-xml-conduit" ,ghc-xml-conduit) + ("ghc-xml-hamlet" ,ghc-xml-hamlet) + ("ghc-network" ,ghc-network) + ("ghc-network-uri" ,ghc-network-uri) + ("ghc-optparse-applicative" ,ghc-optparse-applicative))) + (home-page "http://floss.scru.org/hDAV") + (synopsis "RFC 4918 WebDAV support") + (description "This package provides a library for the Web Distributed +Authoring and Versioning (WebDAV) extensions to HTTP as well an executable, +@command{hdav}, for command-line operation.") + (license license:gpl3))) diff --git a/gnu/packages/haskell-xyz.scm b/gnu/packages/haskell-xyz.scm index 08d6580a32..f4af00283c 100644 --- a/gnu/packages/haskell-xyz.scm +++ b/gnu/packages/haskell-xyz.scm @@ -20,7 +20,7 @@ ;;; Copyright © 2019 Robert Vollmert <rob@vllmrt.net> ;;; Copyright © 2019 Jacob MacDonald <jaccarmac@gmail.com> ;;; Copyright © 2019,2020 John Soo <jsoo1@asu.edu> -;;; Copyright © 2019 Kyle Meyer <kyle@kyleam.com> +;;; Copyright © 2019, 2020 Kyle Meyer <kyle@kyleam.com> ;;; Copyright © 2019 Alex Griffin <a@ajgrf.com> ;;; Copyright © 2020 Brett Gilio <brettg@gnu.org> ;;; Copyright © 2020 JoJo <jo@jo.zone> @@ -14712,6 +14712,30 @@ the @code{conduit} package.") documents.") (license license:expat))) +(define-public ghc-xml-hamlet + (package + (name "ghc-xml-hamlet") + (version "0.5.0.1") + (source + (origin + (method url-fetch) + (uri (string-append "https://hackage.haskell.org/package/xml-hamlet/" + "xml-hamlet-" version ".tar.gz")) + (sha256 + (base32 "0jrhcjy7ww59dafg857f2g2df1fw2jmbwcs1q379ph0pc5rxj3lj")))) + (build-system haskell-build-system) + (inputs + `(("ghc-shakespeare" ,ghc-shakespeare) + ("ghc-xml-conduit" ,ghc-xml-conduit))) + (native-inputs + `(("ghc-hspec" ,ghc-hspec) + ("ghc-hunit" ,ghc-hunit))) + (home-page "https://www.yesodweb.com/") + (synopsis "Hamlet-style quasiquoter for XML content") + (description "This package provides a type-safe tool for generating XML +code via quasi-quoting built on top of @code{ghc-shakespeare}.") + (license license:bsd-3))) + (define-public ghc-yaml (package (name "ghc-yaml") diff --git a/gnu/packages/hexedit.scm b/gnu/packages/hexedit.scm index c2c6228548..e5ea18cde6 100644 --- a/gnu/packages/hexedit.scm +++ b/gnu/packages/hexedit.scm @@ -1,7 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2016 Kei Kebreau <kkebreau@posteo.net> ;;; Copyright © 2017 Gábor Boskovits <boskovits@gmail.com> -;;; Copyright © 2018 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2018, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2020 Jakub Kądziołka <kuba@kadziolka.net> ;;; ;;; This file is part of GNU Guix. @@ -34,7 +34,7 @@ (define-public hexedit (package (name "hexedit") - (version "1.4.2") + (version "1.5") (source (origin (method git-fetch) (uri (git-reference @@ -43,7 +43,7 @@ (file-name (git-file-name name version)) (sha256 (base32 - "1xsxa5mip892jkvz9jshj73y6c7j3mgp8y393ciihqlyf2nmfs67")))) + "1sfa4i374n1xrz2ivvzcd8jzc296ly11x1713s4bplvszcqpw6dv")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no check target diff --git a/gnu/packages/idris.scm b/gnu/packages/idris.scm index 14b16882f0..1982d7cf07 100644 --- a/gnu/packages/idris.scm +++ b/gnu/packages/idris.scm @@ -90,6 +90,11 @@ "-fFFI" "-fGMP") #:phases (modify-phases %standard-phases + ;; This allows us to call the 'idris' binary before installing. + (add-after 'unpack 'set-ld-library-path + (lambda _ + (setenv "LD_LIBRARY_PATH" (string-append (getcwd) "/dist/build")) + #t)) (add-after 'unpack 'update-constraints (lambda _ (substitute* "idris.cabal" @@ -116,7 +121,18 @@ (setenv "TASTY_NUM_THREADS" (number->string (parallel-job-count))) (setenv "IDRIS_CC" "gcc") ;Needed for creating executables (setenv "PATH" (string-append out "/bin:" (getenv "PATH"))) - (apply (assoc-ref %standard-phases 'check) args))))))) + (apply (assoc-ref %standard-phases 'check) args)))) + (add-before 'check 'restore-libidris_rts + (lambda* (#:key outputs #:allow-other-keys) + ;; The Haskell build system moves this library to the + ;; "static" output. Idris only knows how to find it in the + ;; "out" output, so we restore it here. + (let ((out (assoc-ref outputs "out")) + (static (assoc-ref outputs "static")) + (filename "/lib/idris/rts/libidris_rts.a")) + (rename-file (string-append static filename) + (string-append out filename)) + #t)))))) (native-search-paths (list (search-path-specification (variable "IDRIS_LIBRARY_PATH") diff --git a/gnu/packages/image-processing.scm b/gnu/packages/image-processing.scm index cd580d53b9..9158e14938 100644 --- a/gnu/packages/image-processing.scm +++ b/gnu/packages/image-processing.scm @@ -568,14 +568,14 @@ due to its architecture which automatically parallelises the image workflows.") (define-public gmic (package (name "gmic") - (version "2.9.1") + (version "2.9.2") (source (origin (method url-fetch) (uri (string-append "https://gmic.eu/files/source/gmic_" version ".tar.gz")) (sha256 - (base32 "13axx7nwchn6ysgpvlw3fib474q4nrwv3qn20g3q03ldid0xvjah")))) + (base32 "14acph914a8lp6qqfmp319ggqjg3i3hmalmnpk3mp07m7vpv2p9q")))) (build-system cmake-build-system) (arguments `(#:tests? #f)) ;there are no tests diff --git a/gnu/packages/image-viewers.scm b/gnu/packages/image-viewers.scm index f93b353dd6..05e09263a0 100644 --- a/gnu/packages/image-viewers.scm +++ b/gnu/packages/image-viewers.scm @@ -2,7 +2,7 @@ ;;; Copyright © 2013, 2017, 2018, 2019, 2020 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2014 Ian Denhardt <ian@zenhack.net> ;;; Copyright © 2015, 2016 Alex Kost <alezost@gmail.com> -;;; Copyright © 2016, 2017, 2018, 2019 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2016, 2017, 2018, 2019, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2017 Alex Griffin <a@ajgrf.com> ;;; Copyright © 2017 Nikita <nikita@n0.is> ;;; Copyright © 2017 Mathieu Othacehe <m.othacehe@gmail.com> @@ -74,7 +74,7 @@ (define-public feh (package (name "feh") - (version "3.4.1") + (version "3.5") (home-page "https://feh.finalrewind.org/") (source (origin (method url-fetch) @@ -82,14 +82,15 @@ name "-" version ".tar.bz2")) (sha256 (base32 - "0yvvj1s7ayn0lwils582smwkmckdk0gij5c58g45n4xh981n693q")))) + "07jklibpi4ig9pbdrwhllsfffxn2h8xf4ma36qii00w4hb69v3rq")))) (build-system gnu-build-system) (arguments '(#:phases (modify-phases %standard-phases (delete 'configure)) #:test-target "test" #:make-flags (list "CC=gcc" (string-append "PREFIX=" (assoc-ref %outputs "out")) - "exif=1"))) + "exif=1" + "inotify=1"))) (native-inputs `(("perl" ,perl) ("perl-test-command" ,perl-test-command))) @@ -202,7 +203,7 @@ It is the default image viewer on LXDE desktop environment.") `(#:tests? #f ; no check target #:make-flags (list (string-append "PREFIX=" %output) - "CC=gcc" + (string-append "CC=" ,(cc-for-target)) ;; Xft.h #includes <ft2build.h> without ‘freetype2/’. The Makefile ;; works around this by hard-coding /usr/include & $PREFIX. (string-append "CPPFLAGS=-I" @@ -211,7 +212,16 @@ It is the default image viewer on LXDE desktop environment.") "V=1") #:phases (modify-phases %standard-phases - (delete 'configure)))) ; no configure script + (delete 'configure) ; no configure script + (add-after 'install 'install-desktop-file + (lambda* (#:key outputs #:allow-other-keys) + (install-file "sxiv.desktop" + (string-append (assoc-ref outputs "out") + "/share/applications")) + #t)) + (add-after 'install 'install-icons + (lambda* (#:key make-flags #:allow-other-keys) + (apply invoke "make" "-C" "icon" "install" make-flags)))))) (inputs `(("freetype" ,freetype) ("giflib" ,giflib) diff --git a/gnu/packages/image.scm b/gnu/packages/image.scm index 6604ac5359..4606cc77b2 100644 --- a/gnu/packages/image.scm +++ b/gnu/packages/image.scm @@ -1409,7 +1409,7 @@ convert, manipulate, filter and display a wide variety of image formats.") (define-public jasper (package (name "jasper") - (version "2.0.19") + (version "2.0.20") (source (origin (method git-fetch) (uri (git-reference @@ -1418,8 +1418,20 @@ convert, manipulate, filter and display a wide variety of image formats.") (file-name (git-file-name name version)) (sha256 (base32 - "036rcr0wkz9gzmvk1jb96piznk0c0bwxgf31z1zrlg8js4zl1n84")))) + "1bn4mg6l5afryrlyk3y7p3accdq113fis8hpwywy5g51ycablz3h")))) (build-system cmake-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'disable-checking-disabled-things + (lambda _ + ;; The MIF codec was disabled for security reasons in JasPer 2.0.20 + ;; but its test suite still assumes that the format is supported. + (for-each delete-file + (find-files "data/test" "\\.mif$")) ; for run_test_1 + (substitute* "test/bin/run_test_2" + (("image_formats\\+=\\(mif\\)") "")) + #t))))) (inputs `(("libjpeg" ,libjpeg-turbo))) (synopsis "JPEG-2000 library") (description "The JasPer Project is an initiative to provide a reference diff --git a/gnu/packages/javascript.scm b/gnu/packages/javascript.scm index d5ff5bffee..0e61cf10ff 100644 --- a/gnu/packages/javascript.scm +++ b/gnu/packages/javascript.scm @@ -393,6 +393,12 @@ means that these shams cause many ES5 methods to silently fail.") (lambda _ (substitute* "src/FileSaver.js" (("export ") "")) + #t)) + (add-after 'install 'install-unminified-version + (lambda* (#:key outputs #:allow-other-keys) + (install-file "src/FileSaver.js" + (string-append (assoc-ref outputs "out") + "/share/javascript")) #t))))) (home-page "https://eligrey.com/blog/saving-generated-files-on-the-client-side/") @@ -441,3 +447,34 @@ to use, and is very similar to Lua. There is no need to interact with byzantine C++ template mechanisms, or worry about marking and unmarking garbage collection roots, or wrestle with obscure build systems.") (license license:isc))) + +(define-public quickjs + (package + (name "quickjs") + (version "2020-09-06") + (source (origin + (method url-fetch) + (uri (string-append "https://bellard.org/quickjs/quickjs-" + version ".tar.xz")) + (sha256 + (base32 + "05vpnnzmws7plnwsnk2brwf7whyj84l5xl0iahi1xdn6rpla6880")))) + (build-system gnu-build-system) + (arguments + `(#:make-flags + (list "prefix=" + (string-append "DESTDIR=" %output)) + #:phases + (modify-phases %standard-phases + (delete 'configure) + (replace 'check + (lambda _ + (invoke "make" "microbench")))))) + (home-page "https://bellard.org/quickjs/") + (synopsis "Small embeddable Javascript engine") + (description "QuickJS supports the ES2020 specification including modules, +asynchronous generators, proxies, BigInt and BigDecimal. It can compile +Javascript sources to executables with no external dependency. It includes a +command line interpreter with contextual colorization implemented in +Javascript and a small built-in standard library with C library wrappers.") + (license license:expat))) diff --git a/gnu/packages/kde-frameworks.scm b/gnu/packages/kde-frameworks.scm index a1abd7d46c..d264ca5bbe 100644 --- a/gnu/packages/kde-frameworks.scm +++ b/gnu/packages/kde-frameworks.scm @@ -27,6 +27,7 @@ (define-module (gnu packages kde-frameworks) #:use-module (guix build-system cmake) #:use-module (guix build-system qt) + #:use-module (guix build-system trivial) #:use-module (guix download) #:use-module ((guix licenses) #:prefix license:) #:use-module (guix packages) @@ -57,6 +58,7 @@ #:use-module (gnu packages gstreamer) #:use-module (gnu packages image) #:use-module (gnu packages kerberos) + #:use-module (gnu packages kde-plasma) #:use-module (gnu packages libreoffice) #:use-module (gnu packages linux) #:use-module (gnu packages mp3) @@ -325,6 +327,63 @@ It is the default icon theme for the KDE Plasma 5 desktop.") ;; text. (license license:lgpl3+))) +(define-public breeze-assets + (package + (inherit breeze-icons) + (name "breeze-assets") + (version "5.19.5") + (source (origin + (method url-fetch) + (uri (string-append + "mirror://kde/stable/plasma/" version + "/breeze-" version ".tar.xz")) + (sha256 + (base32 + "0dpk1w7zcafrzf46j060i1qb0fwqpsflkfzr6gcar81llmjnc4b1")))) + (inputs + `(,@(package-inputs breeze-icons) + ("ki18n" ,ki18n) + ("kpackage" ,kpackage) + ("kguiaddons" ,kguiaddons) + ("kdecoration" ,kdecoration) + ("kcoreaddons" ,kcoreaddons) + ("kiconthemes" ,kiconthemes) + ("kwindowsystem" ,kwindowsystem) + ("kconfigwidgets" ,kconfigwidgets) + ("qtx11extras" ,qtx11extras))) + (home-page "https://github.com/KDE/breeze") + (synopsis "Artwork, styles and assets for the Breeze visual style") + (description "This package contains artwork, styles and assets associated +with the Breeze visual style.") + (license license:gpl2+))) + +(define-public breeze + (package + (name "breeze") + (version (package-version breeze-assets)) + (source #f) + (build-system trivial-build-system) + (arguments + `(#:modules ((guix build union)) + #:builder + (begin + (use-modules (ice-9 match) + (guix build union)) + (match %build-inputs + (((names . directories) ...) + (union-build (assoc-ref %outputs "out") + directories) + #t))))) + (inputs + `(("breeze-icons" ,breeze-icons) + ("breeze-assets" ,breeze-assets))) + (home-page "https://github.com/KDE/breeze-icons") + (synopsis "Full KDE Breeze theme") + (description + "This package contains the full Breeze visual style for KDE: +assets and icons.") + (license (list license:gpl2 license:gpl3+)))) + (define-public kapidox (package (name "kapidox") diff --git a/gnu/packages/kde-multimedia.scm b/gnu/packages/kde-multimedia.scm index dd1355010e..23417a982d 100644 --- a/gnu/packages/kde-multimedia.scm +++ b/gnu/packages/kde-multimedia.scm @@ -355,7 +355,7 @@ This package is part of the KDE multimedia module.") ("libiconv" ,libiconv) ("libkcddb" ,libkcddb) ("libmad" ,libmad) - ("libmpcdec" ,libmpcdec) ;; FIXME: why does cmake not find this? + ("libmpcdec" ,libmpcdec) ;;("libmusicbrainz" ,libmusicbrainz) ; wants old version 2 ("libsamplerate" ,libsamplerate) ("libsndfile" ,libsndfile) @@ -366,7 +366,8 @@ This package is part of the KDE multimedia module.") ("shared-mime-info" ,shared-mime-info) ("solid" ,solid) ("sox" ,sox) - ("taglib" ,taglib))) + ("taglib" ,taglib) + ("zlib" ,zlib))) (home-page "https://kde.org/applications/multimedia/org.kde.k3b") (synopsis "Sophisticated CD/DVD burning application") (description "K3b is CD-writing software which intends to be feature-rich diff --git a/gnu/packages/kde.scm b/gnu/packages/kde.scm index 9bc753001e..a9ac23e049 100644 --- a/gnu/packages/kde.scm +++ b/gnu/packages/kde.scm @@ -155,6 +155,7 @@ This package contains GUI widgets for baloo.") (inputs `(("shared-mime-info" ,shared-mime-info) ("frei0r-plugins" ,frei0r-plugins) + ("ffmpeg" ,ffmpeg) ("rttr" ,rttr) ("mlt" ,mlt) ("qtbase" ,qtbase) @@ -190,8 +191,11 @@ This package contains GUI widgets for baloo.") (qtbase (assoc-ref inputs "qtbase")) (qtdeclarative (assoc-ref inputs "qtdeclarative")) (frei0r (assoc-ref inputs "frei0r-plugins")) + (ffmpeg (assoc-ref inputs "ffmpeg")) (qml "/lib/qt5/qml")) (wrap-program (string-append out "/bin/kdenlive") + `("PATH" ":" prefix + ,(list (string-append ffmpeg "/bin"))) `("QT_PLUGIN_PATH" ":" prefix ,(map (lambda (label) (string-append (assoc-ref inputs label) diff --git a/gnu/packages/kodi.scm b/gnu/packages/kodi.scm index 556dd6b4e5..2edf5c0614 100644 --- a/gnu/packages/kodi.scm +++ b/gnu/packages/kodi.scm @@ -269,7 +269,7 @@ alternatives. In compilers, this can reduce the cascade of secondary errors.") (define-public kodi (package (name "kodi") - (version "18.7.1") + (version "18.8") (source (origin (method git-fetch) (uri (git-reference @@ -278,7 +278,7 @@ alternatives. In compilers, this can reduce the cascade of secondary errors.") (file-name (git-file-name name version)) (sha256 (base32 - "1ypn29yhy49mz9x4xqh2zfdrsbfwm1b4canvh9zvy9c1irjwf419")) + "0qpkpz43s207msvv3qkiy6vzqwcgmydxv3py7vc29mv6h30chrva")) (patches (search-patches "kodi-skip-test-449.patch" "kodi-increase-test-timeout.patch" "kodi-set-libcurl-ssl-parameters.patch")) diff --git a/gnu/packages/language.scm b/gnu/packages/language.scm index 4959f96a19..0c59cd1bf7 100644 --- a/gnu/packages/language.scm +++ b/gnu/packages/language.scm @@ -4,6 +4,7 @@ ;;; Copyright © 2018 Nikita <nikita@n0.is> ;;; Copyright © 2019 Alex Vong <alexvong1995@gmail.com> ;;; Copyright © 2020 Ricardo Wurmus <rekado@elephly.net> +;;; Copyright © 2020 Julien Lepiller <julien@lepiller.eu> ;;; ;;; This file is part of GNU Guix. ;;; @@ -23,14 +24,17 @@ (define-module (gnu packages language) #:use-module (gnu packages) #:use-module (gnu packages autotools) + #:use-module (gnu packages audio) #:use-module (gnu packages glib) #:use-module (gnu packages gtk) #:use-module (gnu packages java) + #:use-module (gnu packages linux) #:use-module (gnu packages llvm) #:use-module (gnu packages man) #:use-module (gnu packages ocr) #:use-module (gnu packages perl) #:use-module (gnu packages pkg-config) + #:use-module (gnu packages pulseaudio) #:use-module (gnu packages python) #:use-module (gnu packages perl-check) #:use-module (gnu packages swig) @@ -1057,3 +1061,46 @@ labelled links connecting pairs of words. The parser also produces a \"constituent\" (HPSG style phrase tree) representation of a sentence (showing noun phrases, verb phrases, etc.).") (license bsd-3))) + +(define-public praat + (package + (name "praat") + (version "6.1.16") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/praat/praat") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1rx4qvl0dd85x0r6pl0zk4bysx9ykxl05kywjr4pyvv6dvpswkrm")))) + (build-system gnu-build-system) + (arguments + `(#:tests? #f; no test target + #:phases + (modify-phases %standard-phases + (replace 'configure + (lambda _ + (copy-file "makefiles/makefile.defs.linux.pulse" "makefile.defs") + #t)) + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (bin (string-append out "/bin"))) + (mkdir-p bin) + (copy-file "praat" (string-append bin "/praat"))) + #t))))) + (inputs + `(("alsa-lib" ,alsa-lib) + ("gtk" ,gtk+-2) + ("jack" ,jack-1) + ("publesaudio" ,pulseaudio))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (home-page "http://www.fon.hum.uva.nl/praat/") + (synopsis "Doing phonetics by computer") + (description "Praat is a tool to perform phonetics tasks. It can do speach +analysis (pitch, formant, intensity, ...), speach synthesis, labeling, segmenting +and manipulation.") + (license gpl2+))) diff --git a/gnu/packages/less.scm b/gnu/packages/less.scm index 7c5107de09..6543435fab 100644 --- a/gnu/packages/less.scm +++ b/gnu/packages/less.scm @@ -59,7 +59,7 @@ text editors.") (define-public lesspipe (package (name "lesspipe") - (version "1.84") + (version "1.85") (source (origin (method git-fetch) (uri (git-reference @@ -68,7 +68,7 @@ text editors.") (file-name (git-file-name name version)) (sha256 (base32 - "124ffhzrikr88ab14rk6753n8adxijpmg7q3zx7nmqc52wpkfd8q")))) + "1v1jdkdq1phc93gdr6mjlk98gipxrkkq4bj8kks0kfdvjgdwkdaa")))) (build-system gnu-build-system) (arguments '(#:tests? #f ; no tests diff --git a/gnu/packages/libedit.scm b/gnu/packages/libedit.scm index 38da02572a..e02c72fdac 100644 --- a/gnu/packages/libedit.scm +++ b/gnu/packages/libedit.scm @@ -1,7 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2015 Federico Beffa <beffa@fbengineering.ch> ;;; Copyright © 2015 Ricardo Wurmus <rekado@elephly.net> -;;; Copyright © 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2018, 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2019 Gábor Boskovits <boskovits@gmail.com> ;;; Copyright © 2020 Giacomo Leidi <goodoldpaul@autistici.org> ;;; @@ -30,14 +30,14 @@ (define-public libedit (package (name "libedit") - (version "20191025-3.1") + (version "20191231-3.1") (source (origin (method url-fetch) (uri (string-append "https://thrysoee.dk/editline" "/libedit-" version ".tar.gz")) (sha256 - (base32 "0fdznw6fklis39xqk30ihw8dl8kdw9fzq1z42jmbyy6lc1k07zvd")))) + (base32 "0wch48nml28jj6ild889745dsg2agm7mpvrmbl1gi98nw6vjrf6v")))) (build-system gnu-build-system) (inputs `(("ncurses" ,ncurses))) diff --git a/gnu/packages/libreoffice.scm b/gnu/packages/libreoffice.scm index ebe4fd7246..b85a3a60ac 100644 --- a/gnu/packages/libreoffice.scm +++ b/gnu/packages/libreoffice.scm @@ -762,14 +762,14 @@ from the old StarOffice (.sdc, .sdw, ...).") (define-public libwps (package (name "libwps") - (version "0.4.10") + (version "0.4.12") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/" name "/" name "/" name "-" version "/" name "-" version ".tar.xz")) (sha256 (base32 - "1ji9zd4wxmas03g8jyx0ih0amrqfazm5874a2v9rd7va50sf088l")))) + "1nsfacqp5sfkyayw7q0wp68lidksd1wjdix8qmsbf0vdl19gn6p2")))) (build-system gnu-build-system) (native-inputs `(("doxygen" ,doxygen) @@ -1049,7 +1049,7 @@ converting QuarkXPress file format. It supports versions 3.1 to 4.1.") (define-public libreoffice (package (name "libreoffice") - (version "6.4.5.2") + (version "6.4.6.2") (source (origin (method url-fetch) @@ -1058,8 +1058,7 @@ converting QuarkXPress file format. It supports versions 3.1 to 4.1.") "https://download.documentfoundation.org/libreoffice/src/" (version-prefix version 3) "/libreoffice-" version ".tar.xz")) (sha256 - (base32 - "1v4ili9j8d0xfj3q69niski1v65icg8xi09ip2bsk343rawwck3a")))) + (base32 "0k5aq1pfw2rpq28nkx6syrgwqbbdn6my9bnlqi3fn8qf572q30mb")))) (build-system glib-or-gtk-build-system) (native-inputs `(("bison" ,bison) @@ -1142,121 +1141,121 @@ converting QuarkXPress file format. It supports versions 3.1 to 4.1.") ("xmlsec" ,xmlsec-nss) ("zip" ,zip))) (arguments - `(#:tests? #f ; Building the tests already fails. + `(#:tests? #f ; Building the tests already fails. #:make-flags '("build-nocheck") ; Do not build unit tests, which fails. #:phases - (modify-phases %standard-phases - (add-before 'configure 'prepare-src - (lambda* (#:key inputs #:allow-other-keys) - (substitute* - (list "sysui/CustomTarget_share.mk" - "solenv/gbuild/gbuild.mk" - "solenv/gbuild/platform/unxgcc.mk") - (("/bin/sh") (which "sh"))) + (modify-phases %standard-phases + (add-before 'configure 'prepare-src + (lambda* (#:key inputs #:allow-other-keys) + (substitute* + (list "sysui/CustomTarget_share.mk" + "solenv/gbuild/gbuild.mk" + "solenv/gbuild/platform/unxgcc.mk") + (("/bin/sh") (which "sh"))) - ;; Use store references for strictly necessary commands, - ;; but not for optional tools like ‘gdb’ and ‘valgrind’. - (for-each (lambda (command) - (substitute* "desktop/scripts/soffice.sh" - (((format #f"~a " command)) - (format #f "~a " (which command))))) - (list "dirname" "grep" "uname")) + ;; Use store references for strictly necessary commands, + ;; but not for optional tools like ‘gdb’ and ‘valgrind’. + (for-each (lambda (command) + (substitute* "desktop/scripts/soffice.sh" + (((format #f"~a " command)) + (format #f "~a " (which command))))) + (list "dirname" "grep" "uname")) - ;; GPGME++ headers are installed in a gpgme++ subdirectory, but - ;; files in "xmlsecurity/source/gpg/" and elsewhere expect to - ;; find them on the include path without a prefix. - (substitute* '("xmlsecurity/Library_xsec_xmlsec.mk" - "comphelper/Library_comphelper.mk") - (("\\$\\$\\(INCLUDE\\)") - (string-append "$$(INCLUDE) -I" - (assoc-ref inputs "gpgme") - "/include/gpgme++"))) + ;; GPGME++ headers are installed in a gpgme++ subdirectory, but + ;; files in "xmlsecurity/source/gpg/" and elsewhere expect to + ;; find them on the include path without a prefix. + (substitute* '("xmlsecurity/Library_xsec_xmlsec.mk" + "comphelper/Library_comphelper.mk") + (("\\$\\$\\(INCLUDE\\)") + (string-append "$$(INCLUDE) -I" + (assoc-ref inputs "gpgme") + "/include/gpgme++"))) - ;; /usr/bin/xdg-open doesn't exist on Guix System. - (substitute* '("shell/source/unix/exec/shellexec.cxx" - "shell/source/unix/misc/senddoc.sh") - (("/usr/bin/xdg-open") - (string-append (assoc-ref inputs "xdg-utils") - "/bin/xdg-open"))) + ;; /usr/bin/xdg-open doesn't exist on Guix System. + (substitute* '("shell/source/unix/exec/shellexec.cxx" + "shell/source/unix/misc/senddoc.sh") + (("/usr/bin/xdg-open") + (string-append (assoc-ref inputs "xdg-utils") + "/bin/xdg-open"))) - #t)) - (add-after 'install 'bin-and-desktop-install - ;; Create 'soffice' and 'libreoffice' symlinks to the executable - ;; script. - (lambda* (#:key outputs #:allow-other-keys) - (let ((out (assoc-ref outputs "out"))) - (define (symlink-output src dst) - (mkdir-p (dirname (string-append out dst))) - (symlink (string-append out src) (string-append out dst))) - (define (install src dst) - (let ((dst (string-append out dst))) - (mkdir-p (dirname dst)) - (copy-file src dst))) - (define (install-desktop-file app) - (let ((src (string-append "/lib/libreoffice/share/xdg/" - app ".desktop")) - (dst (string-append "/share/applications/libreoffice-" - app ".desktop"))) - (substitute* (string-append out src) - (("Exec=libreoffice[0-9]+\\.[0-9]+ ") - (string-append "Exec=" out "/bin/libreoffice ")) - (("Icon=libreoffice.*") - (string-append "Icon=" app "\n")) - (("LibreOffice [0-9]+\\.[0-9]+") - "LibreOffice")) - (symlink-output src dst))) - (define (install-appdata app) - (install-file (string-append - "sysui/desktop/appstream-appdata/" - "libreoffice-" app ".appdata.xml") - (string-append out "/share/appdata"))) - (symlink-output "/lib/libreoffice/program/soffice" - "/bin/soffice") - (symlink-output "/lib/libreoffice/program/soffice" - "/bin/libreoffice") - (install "workdir/CustomTarget/sysui/share/libreoffice/openoffice.keys" - "/share/mime-info/libreoffice.keys") - (install "workdir/CustomTarget/sysui/share/libreoffice/openoffice.mime" - "/share/mime-info/libreoffice.mime") - (install - "workdir/CustomTarget/sysui/share/libreoffice/openoffice.org.xml" - "/share/mime/packages/libreoffice.xml") - (for-each install-desktop-file - '("base" "calc" "draw" "impress" "writer" - "math" "startcenter")) - (for-each install-appdata - '("base" "calc" "draw" "impress" "writer")) - (mkdir-p (string-append out "/share/icons/hicolor")) - (copy-recursively "sysui/desktop/icons/hicolor" - (string-append out "/share/icons/hicolor"))) - #t))) + #t)) + (add-after 'install 'bin-and-desktop-install + ;; Create 'soffice' and 'libreoffice' symlinks to the executable + ;; script. + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (define (symlink-output src dst) + (mkdir-p (dirname (string-append out dst))) + (symlink (string-append out src) (string-append out dst))) + (define (install src dst) + (let ((dst (string-append out dst))) + (mkdir-p (dirname dst)) + (copy-file src dst))) + (define (install-desktop-file app) + (let ((src (string-append "/lib/libreoffice/share/xdg/" + app ".desktop")) + (dst (string-append "/share/applications/libreoffice-" + app ".desktop"))) + (substitute* (string-append out src) + (("Exec=libreoffice[0-9]+\\.[0-9]+ ") + (string-append "Exec=" out "/bin/libreoffice ")) + (("Icon=libreoffice.*") + (string-append "Icon=" app "\n")) + (("LibreOffice [0-9]+\\.[0-9]+") + "LibreOffice")) + (symlink-output src dst))) + (define (install-appdata app) + (install-file (string-append + "sysui/desktop/appstream-appdata/" + "libreoffice-" app ".appdata.xml") + (string-append out "/share/appdata"))) + (symlink-output "/lib/libreoffice/program/soffice" + "/bin/soffice") + (symlink-output "/lib/libreoffice/program/soffice" + "/bin/libreoffice") + (install "workdir/CustomTarget/sysui/share/libreoffice/openoffice.keys" + "/share/mime-info/libreoffice.keys") + (install "workdir/CustomTarget/sysui/share/libreoffice/openoffice.mime" + "/share/mime-info/libreoffice.mime") + (install + "workdir/CustomTarget/sysui/share/libreoffice/openoffice.org.xml" + "/share/mime/packages/libreoffice.xml") + (for-each install-desktop-file + '("base" "calc" "draw" "impress" "writer" + "math" "startcenter")) + (for-each install-appdata + '("base" "calc" "draw" "impress" "writer")) + (mkdir-p (string-append out "/share/icons/hicolor")) + (copy-recursively "sysui/desktop/icons/hicolor" + (string-append out "/share/icons/hicolor"))) + #t))) #:configure-flags - (list - "--enable-release-build" - ;; Avoid using all cpu cores by default - (format #f "--with-parallelism=~d" (parallel-job-count)) - "--disable-fetch-external" ; disable downloads - "--with-system-libs" ; enable all --with-system-* flags - (string-append "--with-boost-libdir=" - (assoc-ref %build-inputs "boost") "/lib") - ;; Avoid undefined symbols required by boost::spirit - "LDFLAGS=-lboost_system" - ;; Avoid a dependency on ucpp. - "--with-idlc-cpp=cpp" - ;; The fonts require an external tarball (crosextrafonts). - ;; They should not be needed when system fonts are available. - "--without-fonts" - ;; With java, the build fails since sac.jar is missing. - "--without-java" - ;; FIXME: Enable once the corresponding inputs are packaged. - "--disable-coinmp" - "--disable-firebird-sdbc" ; embedded firebird - ;; XXX: PDFium support requires fetching an external tarball and - ;; patching the build scripts to work with GCC5. Try enabling this - ;; when our default compiler is >=GCC 6. - "--disable-pdfium" - "--without-doxygen" - "--enable-build-opensymbol"))) + (list + "--enable-release-build" + ;; Avoid using all cpu cores by default + (format #f "--with-parallelism=~d" (parallel-job-count)) + "--disable-fetch-external" ; disable downloads + "--with-system-libs" ; enable all --with-system-* flags + (string-append "--with-boost-libdir=" + (assoc-ref %build-inputs "boost") "/lib") + ;; Avoid undefined symbols required by boost::spirit + "LDFLAGS=-lboost_system" + ;; Avoid a dependency on ucpp. + "--with-idlc-cpp=cpp" + ;; The fonts require an external tarball (crosextrafonts). + ;; They should not be needed when system fonts are available. + "--without-fonts" + ;; With java, the build fails since sac.jar is missing. + "--without-java" + ;; FIXME: Enable once the corresponding inputs are packaged. + "--disable-coinmp" + "--disable-firebird-sdbc" ; embedded firebird + ;; XXX: PDFium support requires fetching an external tarball and + ;; patching the build scripts to work with GCC5. Try enabling this + ;; when our default compiler is >=GCC 6. + "--disable-pdfium" + "--without-doxygen" + "--enable-build-opensymbol"))) (home-page "https://www.libreoffice.org/") (synopsis "Office suite") (description "LibreOffice is a comprehensive office suite. It contains diff --git a/gnu/packages/license.scm b/gnu/packages/license.scm index 36bcb75f8d..975608c79b 100644 --- a/gnu/packages/license.scm +++ b/gnu/packages/license.scm @@ -1,6 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2018 Oleg Pykhalov <go.wigust@gmail.com> ;;; Copyright © 2018, 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2020 Michael Rohleder <mike@rohleder.de> ;;; ;;; This file is part of GNU Guix. ;;; @@ -168,16 +169,17 @@ belonging to various licenses.") (define-public reuse (package (name "reuse") - (version "0.7.0") + (version "0.11.1") (source (origin (method url-fetch) (uri (pypi-uri "reuse" version)) (sha256 - (base32 "16wn28xxjcm5qlb7bs6jmdkfrkr5v97s59nmi9cn85qcg4gmj7lk")))) + (base32 "09qjb4f49vr0a7zrszab8g719ilg2p6b942mr0bgyvplrjikkid5")))) (build-system python-build-system) (native-inputs - `(("python-pytest" ,python-pytest))) + `(("python-pytest" ,python-pytest) + ("python-setuptools-scm" ,python-setuptools-scm))) (inputs `(("python-binaryornot" ,python-binaryornot) ("python-boolean.py" ,python-boolean.py) diff --git a/gnu/packages/linphone.scm b/gnu/packages/linphone.scm index 14da150ced..a6492893c8 100644 --- a/gnu/packages/linphone.scm +++ b/gnu/packages/linphone.scm @@ -458,6 +458,14 @@ including media capture, encoding and decoding, and rendering.") (delete-file-recursively (string-append out "/share/doc/linphone-" ,version)) #t))) + (add-after 'install 'install-man-pages + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (man (string-append out "/share/man/man1"))) + (for-each (lambda (file) + (install-file file man)) + (find-files ".." ".*.1$")) + #t))) (add-after 'separate-outputs 'glib-or-gtk-compile-schemas (assoc-ref glib-or-gtk:%standard-phases 'glib-or-gtk-compile-schemas)) (add-after 'glib-or-gtk-compile-schemas 'glib-or-gtk-wrap diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm index 4834aa4dae..59ffb334e0 100644 --- a/gnu/packages/linux.scm +++ b/gnu/packages/linux.scm @@ -48,6 +48,7 @@ ;;; Copyright © 2020 John Soo <jsoo1@asu.edu> ;;; Copyright © 2020 Michael Rohleder <mike@rohleder.de> ;;; Copyright © 2020 Anders Thuné <asse.97@gmail.com> +;;; Copyright © 2020 Maxim Cournoyer <maxim.cournoyer@gmail.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -90,6 +91,7 @@ #:use-module (gnu packages flex) #:use-module (gnu packages file) #:use-module (gnu packages freedesktop) + #:use-module (gnu packages gawk) #:use-module (gnu packages gcc) #:use-module (gnu packages gettext) #:use-module (gnu packages glib) @@ -193,7 +195,7 @@ defconfig. Return the appropriate make target if applicable, otherwise return (method url-fetch) (uri (string-append "https://linux-libre.fsfla.org" "/pub/linux-libre/releases/" version "-gnu/" - "deblob-" (version-major+minor version))) + "deblob-" version)) (file-name (string-append "linux-libre-deblob-" (version-major+minor version))) (sha256 deblob-hash)) @@ -202,52 +204,9 @@ defconfig. Return the appropriate make target if applicable, otherwise return (uri (string-append "https://linux-libre.fsfla.org" "/pub/linux-libre/releases/" version "-gnu/" "deblob-check")) - (file-name (string-append "linux-libre-deblob-check-" - (version-major+minor version))) + (file-name (string-append "linux-libre-deblob-check-" version)) (sha256 deblob-check-hash)))) -(define deblob-scripts-5.8 - (linux-libre-deblob-scripts - "5.8.2" - (base32 "07z7sglyrfh0706icqqf3shadf638pvyid9386r661ds5lbsa2mw") - (base32 "0j6jba5fcddqlb42f95gjl78jisfla4nswqila074gglcrbnl9q7"))) - -(define deblob-scripts-5.7 - (linux-libre-deblob-scripts - "5.7.16" - (base32 "1gharhw104wxp9dxjkzzvsqc2xn44mc9yvacc3v7jh7b6bb0a64a") - (base32 "19mzampqx6j85fbdnl347wsy8zw2fnm189llsjc7jwfm10qc2kms"))) - -(define deblob-scripts-5.4 - (linux-libre-deblob-scripts - "5.4.59" - (base32 "0ckxn7k5zgcqk30dq943bnamr6a6zjbw2aqjl3x30f4kvh5f6k25") - (base32 "1b3q88i2qfdxyvpi9f7jds0qlb8hfpw87mgia096ax6822c2cmyb"))) - -(define deblob-scripts-4.19 - (linux-libre-deblob-scripts - "4.19.140" - (base32 "02zs405awaxydbapka4nz8h6lmnc0dahgczqsrs5s2bmzjyyqkcy") - (base32 "1jiaw0as1ippkrjdpd52657w5mz9qczg3y2hlra7m9k0xawwiqlf"))) - -(define deblob-scripts-4.14 - (linux-libre-deblob-scripts - "4.14.193" - (base32 "091jk9jkn9jf39bxpc7395bhcb7p96nkg3a8047380ki06lnfxh6") - (base32 "1qij18inijj6c3ma8hv98yjagnzxdxyn134da9fd23ky8q6hbvky"))) - -(define deblob-scripts-4.9 - (linux-libre-deblob-scripts - "4.9.232" - (base32 "1wvldzlv7q2xdbadas87dh593nxr4a8p5n0f8zpm72lja6w18hmg") - (base32 "0fxajshb75siq39lj5h8xvhdj8lcmddkslwlyj65rhlwk6g2r4b2"))) - -(define deblob-scripts-4.4 - (linux-libre-deblob-scripts - "4.4.232" - (base32 "0x2j1i88am54ih2mk7gyl79g25l9zz4r08xhl482l3fvjj2irwbw") - (base32 "0hhin1jpfkd6nwrb6xqxjzl3hdxy4pn8a15hy2d3d83yw6pflbsf"))) - (define* (computed-origin-method gexp-promise hash-algo hash #:optional (name "source") #:key (system (%current-system)) @@ -285,6 +244,9 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (srfi srfi-1) (ice-9 match) (ice-9 ftw)) + + (setvbuf (current-output-port) 'line) + (let ((dir (string-append "linux-" #$version))) (mkdir "/tmp/bin") @@ -302,11 +264,8 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." #+(canonical-package bzip2) #+(canonical-package gzip) #+(canonical-package tar) - ;; The comments in the 'deblob-check' script - ;; claim that it supports Python 2 and 3, but - ;; in fact it fails when run in Python 3 as - ;; of version 5.1.3. - #+python-2)) + #+(canonical-package gawk) + #+python-wrapper)) (with-directory-excursion "/tmp/bin" @@ -325,12 +284,10 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (if (file-is-directory? #+upstream-source) (begin (format #t "Copying upstream linux source...~%") - (force-output) (invoke "cp" "--archive" #+upstream-source dir) (invoke "chmod" "--recursive" "u+w" dir)) (begin (format #t "Unpacking upstream linux tarball...~%") - (force-output) (invoke "tar" "xf" #$upstream-source) (match (scandir "." (lambda (name) @@ -343,13 +300,10 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (error "multiple directories found" dirs))))) (with-directory-excursion dir - (setenv "PYTHON" (which "python")) (format #t "Running deblob script...~%") - (force-output) (invoke "/tmp/bin/deblob")) (format #t "~%Packing new Linux-libre tarball...~%") - (force-output) (invoke "tar" "cvfa" #$output ;; Avoid non-determinism in the archive. "--mtime=@0" @@ -357,7 +311,11 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." "--group=root:0" "--sort=name" "--hard-dereference" - dir)))))))))) + dir) + + (format #t "~%Scanning the generated tarball for blobs...~%") + (invoke "/tmp/bin/deblob-check" "--use-awk" "--list-blobs" + #$output)))))))))) ;;; @@ -389,58 +347,85 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (sha256 hash))) -(define-public linux-libre-5.8-version "5.8.3") +;; The current "stable" kernel. That is, the most recently released major +;; version. +(define-public linux-libre-5.8-version "5.8.7") +(define deblob-scripts-5.8 + (linux-libre-deblob-scripts + linux-libre-5.8-version + (base32 "07z7sglyrfh0706icqqf3shadf638pvyid9386r661ds5lbsa2mw") + (base32 "0j6jba5fcddqlb42f95gjl78jisfla4nswqila074gglcrbnl9q7"))) (define-public linux-libre-5.8-pristine-source (let ((version linux-libre-5.8-version) - (hash (base32 "0y8prifvkywqsx5lk80bh31m505vinmicpvdrirgg0c9scg7x8lf"))) + (hash (base32 "1zhpzlhl2ykna2nc70m72wlgyv1pkvkpfssb4k8p5pwlkh1ga2vv"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-5.8))) -(define-public linux-libre-5.7-version "5.7.17") -(define-public linux-libre-5.7-pristine-source - (let ((version linux-libre-5.7-version) - (hash (base32 "09ajavdyvr0025rwvwfp9yv2z8q779nan1i6dck2kkdxr48kd36c"))) - (make-linux-libre-source version - (%upstream-linux-source version hash) - deblob-scripts-5.7))) - -(define-public linux-libre-5.4-version "5.4.60") +;; The "longterm" kernels — the older releases with long-term upstream support. +;; Here are the support timelines: +;; <https://www.kernel.org/category/releases.html> +(define-public linux-libre-5.4-version "5.4.64") +(define deblob-scripts-5.4 + (linux-libre-deblob-scripts + "5.4.63" + (base32 "0ckxn7k5zgcqk30dq943bnamr6a6zjbw2aqjl3x30f4kvh5f6k25") + (base32 "1b3q88i2qfdxyvpi9f7jds0qlb8hfpw87mgia096ax6822c2cmyb"))) (define-public linux-libre-5.4-pristine-source (let ((version linux-libre-5.4-version) - (hash (base32 "08x2a78n23371k7l5p677mihnl58dpjh7r7bvyiwj3y4hlisplmd"))) + (hash (base32 "1vymhl6p7i06gfgpw9iv75bvga5sj5kgv46i1ykqiwv6hj9w5lxr"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-5.4))) -(define-public linux-libre-4.19-version "4.19.141") +(define-public linux-libre-4.19-version "4.19.144") +(define deblob-scripts-4.19 + (linux-libre-deblob-scripts + "4.19.143" + (base32 "02zs405awaxydbapka4nz8h6lmnc0dahgczqsrs5s2bmzjyyqkcy") + (base32 "1jiaw0as1ippkrjdpd52657w5mz9qczg3y2hlra7m9k0xawwiqlf"))) (define-public linux-libre-4.19-pristine-source (let ((version linux-libre-4.19-version) - (hash (base32 "0511vb9rfpy5l6cz69v0v97rw2rk2pscc4hkz2pfmgikagm1shm4"))) + (hash (base32 "0jnj65bdy5y9lcj5zhrn4iaszpww8z41ac66j00l75sd931l1g9k"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.19))) -(define-public linux-libre-4.14-version "4.14.194") +(define-public linux-libre-4.14-version "4.14.197") +(define deblob-scripts-4.14 + (linux-libre-deblob-scripts + "4.14.196" + (base32 "091jk9jkn9jf39bxpc7395bhcb7p96nkg3a8047380ki06lnfxh6") + (base32 "1qij18inijj6c3ma8hv98yjagnzxdxyn134da9fd23ky8q6hbvky"))) (define-public linux-libre-4.14-pristine-source (let ((version linux-libre-4.14-version) - (hash (base32 "1q7ssi2790bqjn8s8ra5ihma70hmxykahink7iq5h78738id191y"))) + (hash (base32 "029h46yki2hxdbn7afmnf3yar1pnwrpszx76irsa5mf8gnrasyp0"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.14))) -(define-public linux-libre-4.9-version "4.9.233") +(define-public linux-libre-4.9-version "4.9.235") +(define deblob-scripts-4.9 + (linux-libre-deblob-scripts + linux-libre-4.9-version + (base32 "1wvldzlv7q2xdbadas87dh593nxr4a8p5n0f8zpm72lja6w18hmg") + (base32 "0fxajshb75siq39lj5h8xvhdj8lcmddkslwlyj65rhlwk6g2r4b2"))) (define-public linux-libre-4.9-pristine-source (let ((version linux-libre-4.9-version) - (hash (base32 "19dcwylhy5iqq3dmppqf7s9wy9d16m103djn1n183c9acnqclv9a"))) + (hash (base32 "1hqcb3zw4546h6x5xy2mywdznha8813lx15mxbgfbvwm4qhsc9g6"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.9))) -(define-public linux-libre-4.4-version "4.4.233") +(define-public linux-libre-4.4-version "4.4.235") +(define deblob-scripts-4.4 + (linux-libre-deblob-scripts + linux-libre-4.4-version + (base32 "0x2j1i88am54ih2mk7gyl79g25l9zz4r08xhl482l3fvjj2irwbw") + (base32 "0hhin1jpfkd6nwrb6xqxjzl3hdxy4pn8a15hy2d3d83yw6pflbsf"))) (define-public linux-libre-4.4-pristine-source (let ((version linux-libre-4.4-version) - (hash (base32 "1z77dikgkvkp9ggwxp07hl8vxsf9kq57rhfdpbvhny1x13fqkrlp"))) + (hash (base32 "0w5pkv936zb0shjgnpv17gcp5n8f91djznzq54p6j1bl5q2qdyqd"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.4))) @@ -478,11 +463,6 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (list %boot-logo-patch %linux-libre-arm-export-__sync_icache_dcache-patch))) -(define-public linux-libre-5.7-source - (source-with-patches linux-libre-5.7-pristine-source - (list %boot-logo-patch - %linux-libre-arm-export-__sync_icache_dcache-patch))) - (define-public linux-libre-5.4-source (source-with-patches linux-libre-5.4-pristine-source (list %boot-logo-patch @@ -586,10 +566,6 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (make-linux-libre-headers* linux-libre-5.8-version linux-libre-5.8-source)) -(define-public linux-libre-headers-5.7 - (make-linux-libre-headers* linux-libre-5.7-version - linux-libre-5.7-source)) - (define-public linux-libre-headers-5.4 (make-linux-libre-headers* linux-libre-5.4-version linux-libre-5.4-source)) @@ -641,6 +617,26 @@ for ARCH and optionally VARIANT, or #f if there is no such configuration." ("CONFIG_USER_NS" . #t) ("CONFIG_PID_NS" . #t) ("CONFIG_NET_NS" . #t) + ;; Various options needed for elogind service: + ;; https://issues.guix.gnu.org/43078 + ("CONFIG_CGROUP_FREEZER" . #t) + ("CONFIG_BLK_CGROUP" . #t) + ("CONFIG_CGROUP_WRITEBACK" . #t) + ("CONFIG_CGROUP_SCHED" . #t) + ("CONFIG_CGROUP_PIDS" . #t) + ("CONFIG_CGROUP_FREEZER" . #t) + ("CONFIG_CGROUP_DEVICE" . #t) + ("CONFIG_CGROUP_CPUACCT" . #t) + ("CONFIG_CGROUP_PERF" . #t) + ("CONFIG_SOCK_CGROUP_DATA" . #t) + ("CONFIG_BLK_CGROUP_IOCOST" . #t) + ("CONFIG_CGROUP_NET_PRIO" . #t) + ("CONFIG_CGROUP_NET_CLASSID" . #t) + ("CONFIG_MEMCG" . #t) + ("CONFIG_MEMCG_SWAP" . #t) + ("CONFIG_MEMCG_KMEM" . #t) + ("CONFIG_CPUSETS" . #t) + ("CONFIG_PROC_PID_CPUSET" . #t) ;; Modules required for initrd: ("CONFIG_NET_9P" . m) ("CONFIG_NET_9P_VIRTIO" . m) @@ -868,12 +864,6 @@ It has been modified to remove all non-free binary blobs.") (define-public linux-libre-source linux-libre-5.8-source) (define-public linux-libre linux-libre-5.8) -(define-public linux-libre-5.7 - (make-linux-libre* linux-libre-5.7-version - linux-libre-5.7-source - '("x86_64-linux" "i686-linux" "armhf-linux" "aarch64-linux" "riscv64-linux") - #:configuration-file kernel-config)) - (define-public linux-libre-5.4 (make-linux-libre* linux-libre-5.4-version linux-libre-5.4-source @@ -3654,7 +3644,7 @@ compliance.") (define-public wireless-regdb (package (name "wireless-regdb") - (version "2019.06.03") + (version "2020.04.29") (source (origin (method url-fetch) (uri (string-append @@ -3662,7 +3652,7 @@ compliance.") "wireless-regdb-" version ".tar.xz")) (sha256 (base32 - "1gslvh0aqdkv48jyr2ddq153mw28i7qz2ybrjj9qvkk3dgc7x4fd")) + "0yicda474ygahv8da18h1p4yf42s6x2f208mlwcw4xsrxld07zc9")) ;; We're building 'regulatory.bin' by ourselves. (snippet '(begin @@ -6926,7 +6916,7 @@ IP addresses and routes, and configure IPsec.") (define-public xfsprogs (package (name "xfsprogs") - (version "5.2.1") + (version "5.7.0") (source (origin (method url-fetch) (uri (string-append @@ -6934,7 +6924,7 @@ IP addresses and routes, and configure IPsec.") "xfsprogs-" version ".tar.gz")) (sha256 (base32 - "0q5xd4gb9g83h82mg68cx616ifzl8qkzzlgg5xna698117ph3wky")))) + "0bssrfhnw5mhybgaa6d8wp87izi3c9cjpjy7vicm6y76mf7kl8p9")))) (build-system gnu-build-system) (outputs (list "out" "python")) (arguments @@ -7208,7 +7198,7 @@ of Linux application development.") (package (inherit pipewire) (name "pipewire") - (version "0.3.7") + (version "0.3.10") (source (origin (method git-fetch) (uri (git-reference @@ -7217,12 +7207,15 @@ of Linux application development.") (file-name (git-file-name name version)) (sha256 (base32 - "04l66p0wj553gp2zf3vwwh6jbr1vkf6wrq4za9zlm9dn144am4j2")))) + "1y293sfhhmzbgnlvs46bpiyimlii5nk71f8115qxs8sviwlsdr3w")))) (arguments - '(#:configure-flags '("-Dsystemd=false") + '(#:configure-flags + (list (string-append "-Dudevrulesdir=" (assoc-ref %outputs "out") + "/lib/udev/rules.d") + "-Dsystemd=false") #:phases (modify-phases %standard-phases - ;; Skip shrink-runpath, otherwise validate-runpath fails + ;; Skip shrink-runpath, otherwise validate-runpath fails. (delete 'shrink-runpath)))) (inputs (append (package-inputs pipewire) @@ -7526,3 +7519,30 @@ tracing (uprobes), and tracepoints. The bpftrace language is inspired by awk and C, and predecessor tracers such as DTrace and SystemTap. bpftrace was created by Alastair Robertson.") (license license:asl2.0))) + +(define-public ttyebus-linux-module + (let ((revision "0") + (commit "fe4332a2281cf79804ef4d8516aa848ca1c58d1f")) + (package + (name "ttyebus-linux-module") + (version (git-version "1.5" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/eBUS/ttyebus.git") + (commit "fe4332a2281cf79804ef4d8516aa848ca1c58d1f"))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1i66xjs9vln5cca6wx7aiiw7jihrlsk9hjdqyczp36fvm1b1bani")))) + (supported-systems '("armhf-linux" "aarch64-linux")) + (build-system linux-module-build-system) + (arguments + `(#:tests? #f)) + (home-page "https://github.com/eBUS/ttyebus") + (synopsis "Low-latency Raspberry Pi UART driver") + (description "This package provides a Linux kernel module that will +provide a serial device @code{/dev/ttyebus} with almost no latency upon +receiving. It is dedicated to the PL011 UART of the Raspberry Pi.") + (license license:gpl3+)))) diff --git a/gnu/packages/lisp-xyz.scm b/gnu/packages/lisp-xyz.scm index 904d202a55..f73709515f 100644 --- a/gnu/packages/lisp-xyz.scm +++ b/gnu/packages/lisp-xyz.scm @@ -71,6 +71,7 @@ #:use-module (gnu packages sqlite) #:use-module (gnu packages tcl) #:use-module (gnu packages tls) + #:use-module (gnu packages web) #:use-module (gnu packages webkit) #:use-module (gnu packages xdisorg) #:use-module (ice-9 match) @@ -1715,7 +1716,7 @@ also be supported.") (define-public sbcl-ironclad (package (name "sbcl-ironclad") - (version "0.50") + (version "0.51") (source (origin (method git-fetch) @@ -1723,7 +1724,7 @@ also be supported.") (url "https://github.com/sharplispers/ironclad/") (commit (string-append "v" version)))) (sha256 - (base32 "0k4bib9mbrzalbl9ivkw4a7g4c7bbad1l5jw4pzkifqszy2swkr5")) + (base32 "1zxkzbxsfb83bb87rhp4h75cc1h5f6ziyfa5lvaa30zgix9l2d7v")) (file-name (git-file-name name version)))) (build-system asdf-build-system/sbcl) (native-inputs @@ -2629,45 +2630,43 @@ package.") (sbcl-package->cl-source-package sbcl-cffi-uffi-compat)) (define-public sbcl-cl-sqlite - (let ((commit "c738e66d4266ef63a1debc4ef4a1b871a068c112")) - (package - (name "sbcl-cl-sqlite") - (version (git-version "0.2" "1" commit)) - (source - (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/dmitryvk/cl-sqlite") - (commit commit))) - (file-name (git-file-name "cl-sqlite" version)) - (sha256 - (base32 - "1ng45k1hdb84sqjryrfx93g66bsbybmpy301wd0fdybnc5jzr36q")))) - (build-system asdf-build-system/sbcl) - (inputs - `(("iterate" ,sbcl-iterate) - ("cffi" ,sbcl-cffi) - ("sqlite" ,sqlite))) - (native-inputs - `(("fiveam" ,sbcl-fiveam) - ("bordeaux-threads" ,sbcl-bordeaux-threads))) - (arguments - `(#:tests? #f ; Upstream seems to have issues with tests: https://github.com/dmitryvk/cl-sqlite/issues/7 - #:asd-file "sqlite.asd" - #:asd-system-name "sqlite" - #:phases - (modify-phases %standard-phases - (add-after 'unpack 'fix-paths - (lambda* (#:key inputs #:allow-other-keys) - (substitute* "sqlite-ffi.lisp" - (("libsqlite3" all) (string-append - (assoc-ref inputs "sqlite")"/lib/" all)))))))) - (home-page "https://common-lisp.net/project/cl-sqlite/") - (synopsis "Common Lisp binding for SQLite") - (description - "The @command{cl-sqlite} package is an interface to the SQLite embedded + (package + (name "sbcl-cl-sqlite") + (version "0.2.1") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/dmitryvk/cl-sqlite") + (commit version))) + (file-name (git-file-name "cl-sqlite" version)) + (sha256 + (base32 + "08iv7b4m0hh7qx2cvq4f510nrgdld0vicnvmqsh9w0fgrcgmyg4k")))) + (build-system asdf-build-system/sbcl) + (inputs + `(("iterate" ,sbcl-iterate) + ("cffi" ,sbcl-cffi) + ("sqlite" ,sqlite))) + (native-inputs + `(("fiveam" ,sbcl-fiveam) + ("bordeaux-threads" ,sbcl-bordeaux-threads))) + (arguments + `(#:asd-file "sqlite.asd" + #:asd-system-name "sqlite" + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-paths + (lambda* (#:key inputs #:allow-other-keys) + (substitute* "sqlite-ffi.lisp" + (("libsqlite3" all) (string-append + (assoc-ref inputs "sqlite")"/lib/" all)))))))) + (home-page "https://common-lisp.net/project/cl-sqlite/") + (synopsis "Common Lisp binding for SQLite") + (description + "The @command{cl-sqlite} package is an interface to the SQLite embedded relational database engine.") - (license license:public-domain)))) + (license license:public-domain))) (define-public cl-sqlite (sbcl-package->cl-source-package sbcl-cl-sqlite)) @@ -3136,10 +3135,10 @@ is a library for creating graphical user interfaces.") (sbcl-package->cl-source-package sbcl-cl-cffi-gtk)) (define-public sbcl-cl-webkit - (let ((commit "6c905a5550b58a5b7602da5a087d7dafc5337122")) + (let ((commit "dccf9d25de4e9a69f716f8ed9578e58963ead967")) (package (name "sbcl-cl-webkit") - (version (git-version "2.4" "4" commit)) + (version (git-version "2.4" "5" commit)) (source (origin (method git-fetch) @@ -3149,7 +3148,7 @@ is a library for creating graphical user interfaces.") (file-name (git-file-name "cl-webkit" version)) (sha256 (base32 - "0017ijjflqqbgbj5bf7ffkyw5idhxc0ggly2qh5igf3kz886p9rh")))) + "0cn43ks2mgqkfnalq1p997z6q5pr1sfvz99gvvr5fp7r1acn7v5w")))) (build-system asdf-build-system/sbcl) (inputs `(("cffi" ,sbcl-cffi) @@ -3611,6 +3610,12 @@ RFC 1321 by R. Rivest, published April 1992.") (define-public cl-md5 (sbcl-package->cl-source-package sbcl-md5)) +(define-public ecl-md5 + (package + (inherit (sbcl-package->ecl-package sbcl-md5)) + (inputs + `(("flexi-streams" ,ecl-flexi-streams))))) + (define-public sbcl-cl+ssl (let ((commit "701e645081e6533a3f0f0b3ac86389d6f506c4b5") (revision "1")) @@ -4923,36 +4928,118 @@ performance and simplicity in mind.") (define-public cl-ningle (sbcl-package->cl-source-package sbcl-ningle)) -(define-public sbcl-clack - (let ((commit "e3e032843bb1220ab96263c411aa7f2feb4746e0") +(define-public sbcl-cl-fastcgi + (let ((commit "d576d20eeb12f225201074b28934ba395b15781a") (revision "1")) (package - (name "sbcl-clack") - (version (git-version "2.0.0" revision commit)) - (source - (origin + (name "sbcl-cl-fastcgi") + (version (git-version "0.2" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/KDr2/cl-fastcgi/") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "02mvzzyn0k960s38rbxaqqmdkwcfmyhf8dx6ynz8xyxflmp0s5zv")))) + (build-system asdf-build-system/sbcl) + (inputs + `(("usocket" ,sbcl-usocket) + ("cffi" ,sbcl-cffi) + ("fcgi" ,fcgi))) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-paths + (lambda* (#:key inputs #:allow-other-keys) + (substitute* "cl-fastcgi.lisp" + (("\"libfcgi.so\"") + (string-append + "\"" + (assoc-ref inputs "fcgi") "/lib/libfcgi.so\"")))))))) + (home-page "https://kdr2.com/project/cl-fastcgi.html") + (synopsis "FastCGI wrapper for Common Lisp") + (description + "CL-FastCGI is a generic version of SB-FastCGI, targeting to run on +mostly Common Lisp implementation.") + ;; TODO: Upstream on specifies "BSD license": + ;; https://github.com/KDr2/cl-fastcgi/issues/4 + (license license:bsd-2)))) + +(define-public cl-fastcgi + (sbcl-package->cl-source-package sbcl-cl-fastcgi)) + +(define-public ecl-cl-fastcgi + (sbcl-package->ecl-package sbcl-cl-fastcgi)) + +(define clack-commit "e3e032843bb1220ab96263c411aa7f2feb4746e0") +(define clack-revision "1") + +(define-public sbcl-clack + (package + (name "sbcl-clack") + (version (git-version "2.0.0" clack-revision clack-commit)) + (source + (origin (method git-fetch) (uri (git-reference (url "https://github.com/fukamachi/clack") - (commit commit))) + (commit clack-commit))) (file-name (git-file-name name version)) (sha256 (base32 "1ymzs6qyrwhlj6cgqsnpyn6g5cbp7a3s1vgxwna20y2q7y4iacy0")))) - (build-system asdf-build-system/sbcl) - (inputs - `(("sbcl-lack" ,sbcl-lack) - ("sbcl-lack-middleware-backtrace" ,sbcl-lack-middleware-backtrace) - ("sbcl-bordeaux-threads" ,sbcl-bordeaux-threads))) - (home-page "https://github.com/fukamachi/clack") - (synopsis "Web Application Environment for Common Lisp") - (description - "Clack is a web application environment for Common Lisp inspired by + (build-system asdf-build-system/sbcl) + (inputs + `(("sbcl-lack" ,sbcl-lack) + ("sbcl-lack-middleware-backtrace" ,sbcl-lack-middleware-backtrace) + ("sbcl-bordeaux-threads" ,sbcl-bordeaux-threads))) + (home-page "https://github.com/fukamachi/clack") + (synopsis "Web Application Environment for Common Lisp") + (description + "Clack is a web application environment for Common Lisp inspired by Python's WSGI and Ruby's Rack.") - (license license:llgpl)))) + (license license:llgpl))) (define-public cl-clack (sbcl-package->cl-source-package sbcl-clack)) +(define-public sbcl-clack-handler-fcgi + (package + (inherit sbcl-clack) + (name "sbcl-clack-handler-fcgi") + (version (git-version "0.3.1" clack-revision clack-commit)) + (inputs + `(("cl-fastcgi" ,sbcl-cl-fastcgi) + ("alexandria" ,sbcl-alexandria) + ("flexi-streams" ,sbcl-flexi-streams) + ("usocket" ,sbcl-usocket) + ("quri" ,sbcl-quri))) + (synopsis "Web Application Environment for Common Lisp (FastCGI handler)"))) + +(define-public cl-clack-handler-fcgi + (sbcl-package->cl-source-package sbcl-clack-handler-fcgi)) + +(define sbcl-clack-socket + (package + (inherit sbcl-clack) + (name "sbcl-clack-socket") + (version (git-version "0.1" clack-revision clack-commit)))) + +(define-public sbcl-clack-handler-hunchentoot + (package + (inherit sbcl-clack) + (name "sbcl-clack-handler-hunchentoot") + (version (git-version "0.4.0" clack-revision clack-commit)) + (inputs + `(("hunchentoot" ,sbcl-hunchentoot) + ("clack-socket" ,sbcl-clack-socket) + ("flexi-streams" ,sbcl-flexi-streams) + ("bordeaux-threads" ,sbcl-bordeaux-threads) + ("split-sequence" ,sbcl-split-sequence) + ("alexandria" ,sbcl-alexandria))) + (synopsis "Web Application Environment for Common Lisp (Hunchentoot handler)"))) + (define-public sbcl-log4cl (let ((commit "611e094458504b938d49de904eab141285328c7c") (revision "1")) @@ -10910,6 +10997,19 @@ a PostgreSQL server over a socket."))) (define-public cl-postgres (sbcl-package->cl-source-package sbcl-cl-postgres)) +(define-public ecl-cl-postgres + (package + (inherit (sbcl-package->ecl-package sbcl-cl-postgres)) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-ecl + (lambda _ + (substitute* "cl-postgres.asd" + (("\\) \"usocket\"") " :ecl) \"usocket\"")) + #t))) + #:tests? #f)))) + (define-public sbcl-simple-date-postgres-glue (package (inherit sbcl-simple-date) @@ -10980,31 +11080,35 @@ foreign libraries. (sbcl-package->cl-source-package sbcl-postmodern)) (define-public sbcl-dbi - (package - (name "sbcl-dbi") - (version "0.9.4") - (source - (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/fukamachi/cl-dbi") - (commit version))) - (file-name (git-file-name name version)) - (sha256 - (base32 "0m1fsravfaizamdak84adh3jxc4j91maqnrb4m08bfbmb04cdqhs")))) - (build-system asdf-build-system/sbcl) - (inputs - `(("bordeaux-threads" ,sbcl-bordeaux-threads) - ("closer-mop" ,sbcl-closer-mop) - ("split-sequence" ,sbcl-split-sequence))) - (arguments - `(#:tests? #f)) ; TODO: Break circular dependency with dbd-* - (synopsis "Database independent interface for Common Lisp") - (description - "@code{dbi} is a Common Lisp library providing a database independent + ;; Master includes a breaking change which other packages depend on since + ;; Quicklisp decided to follow it: + ;; https://github.com/fukamachi/cl-dbi/commit/31c46869722f77fd5292a81b5b101f1347d7fce1 + (let ((commit "31c46869722f77fd5292a81b5b101f1347d7fce1")) + (package + (name "sbcl-dbi") + (version (git-version "0.9.4" "1" commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/fukamachi/cl-dbi") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0r3n4rw12qqxad0cryym2ibm4ddl49gbq4ra227afibsr43nw5k3")))) + (build-system asdf-build-system/sbcl) + (inputs + `(("bordeaux-threads" ,sbcl-bordeaux-threads) + ("closer-mop" ,sbcl-closer-mop) + ("split-sequence" ,sbcl-split-sequence))) + (arguments + `(#:tests? #f)) ; TODO: Break circular dependency with dbd-* + (synopsis "Database independent interface for Common Lisp") + (description + "@code{dbi} is a Common Lisp library providing a database independent interface for MySQL, PostgreSQL and SQLite.") - (home-page "https://github.com/fukamachi/cl-dbi") - (license license:llgpl))) + (home-page "https://github.com/fukamachi/cl-dbi") + (license license:llgpl)))) (define-public cl-dbi (sbcl-package->cl-source-package sbcl-dbi)) @@ -13330,6 +13434,64 @@ specification}, a toolkit for writing GUIs in Common Lisp.") ("swank" ,cl-slime-swank) ("zpb-ttf" ,cl-zpb-ttf)))))) +(define-public sbcl-mcclim-test-util + (package + (inherit sbcl-clim-lisp) + (name "sbcl-mcclim-test-util") + (inputs + `(("fiveam" ,sbcl-fiveam) + ("mcclim" ,sbcl-mcclim) + ("swank" ,cl-slime-swank))) ; For drei-mcclim + (arguments + '(#:asd-file "mcclim.asd" + #:asd-system-name "mcclim/test-util")))) + +(define-public sbcl-mcclim-raster-image + (package + (inherit sbcl-clim-lisp) + (name "sbcl-mcclim-raster-image") + (native-inputs + `(("fiveam" ,sbcl-fiveam) + ("mcclim-test-util" ,sbcl-mcclim-test-util))) + (inputs + `(("clim-basic" ,sbcl-clim-basic) + ("mcclim-backend-common" ,sbcl-mcclim-backend-common) + ("mcclim-render" ,sbcl-mcclim-render) + ("swank" ,cl-slime-swank))) ; For drei-mcclim + (arguments + '(#:asd-file "Backends/RasterImage/mcclim-raster-image.asd" + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-asd-system-names + (lambda _ + (substitute* "Backends/RasterImage/mcclim-raster-image.asd" + (("mcclim/test-util") + "mcclim-test-util")) + #t))))))) + +(define-public sbcl-clim-examples + (package + (inherit sbcl-clim-lisp) + (name "sbcl-clim-examples") + (inputs + `(("alexandria" ,sbcl-alexandria) + ("closer-mop" ,sbcl-closer-mop) + ("mcclim" ,sbcl-mcclim) + ("mcclim-bezier" ,sbcl-mcclim-bezier) + ("mcclim-layouts-tab" ,sbcl-mcclim-layouts-tab) + ("mcclim-raster-image" ,sbcl-mcclim-raster-image) + ("swank" ,cl-slime-swank))) ; For drei-mcclim + (arguments + '(#:asd-file "Examples/clim-examples.asd" + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-asd-system-names + (lambda _ + (substitute* "Examples/clim-examples.asd" + (("mcclim-layouts/tab") + "mcclim-layouts-tab")) + #t))))))) + (define-public sbcl-cl-inflector (let ((commit "f1ab16919ccce3bd82a0042677d9616dde2034fe") (revision "1")) @@ -13539,3 +13701,422 @@ carrys on from the end of the body.") (define-public ecl-livesupport (sbcl-package->ecl-package sbcl-livesupport)) + +(define-public sbcl-envy + (let ((commit "956321b2852d58ba71c6fe621f5c2924178e9f88") + (revision "1")) + (package + (name "sbcl-envy") + (version (git-version "0.1" revision commit)) + (home-page "https://github.com/fukamachi/envy") + (source + (origin + (method git-fetch) + (uri (git-reference + (url home-page) + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "17iwrfxcdinjbb2h6l09qf40s7xkbhrpmnljlwpjy8l8rll8h3vg")))) + (build-system asdf-build-system/sbcl) + ;; (native-inputs ; Only for tests. + ;; `(("prove" ,sbcl-prove) + ;; ("osicat" ,sbcl-osicat))) + (arguments + '(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-tests + (lambda _ + (substitute* "envy-test.asd" + (("cl-test-more") "prove")) + #t))) + ;; Tests fail with + ;; Component ENVY-ASD::ENVY-TEST not found, required by #<SYSTEM "envy"> + ;; like xsubseq. Why? + #:tests? #f)) + (synopsis "Common Lisp configuration switcher inspired by Perl's Config::ENV.") + (description "Envy is a configuration manager for various applications. +Envy uses an environment variable to determine a configuration to use. This +can separate configuration system from an implementation.") + (license license:bsd-2)))) + +(define-public cl-envy + (sbcl-package->cl-source-package sbcl-envy)) + +(define-public ecl-envy + (sbcl-package->ecl-package sbcl-envy)) + +(define sbcl-mito-core + (let ((commit "d3b9e375ef364a65692da2185085a08c969ac88a") + (revision "1")) + (package + (name "sbcl-mito-core") + (version (git-version "0.1" revision commit)) + (home-page "https://github.com/fukamachi/mito") + (source + (origin + (method git-fetch) + (uri (git-reference + (url home-page) + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "08mncgzjnbbsf1a6am3l73iw4lyfvz5ldjg5g84awfaxml4p73mb")))) + (build-system asdf-build-system/sbcl) + (inputs + `(("dbi" ,sbcl-dbi) + ("sxql" ,sbcl-sxql) + ("cl-ppcre" ,sbcl-cl-ppcre) + ("closer-mop" ,sbcl-closer-mop) + ("dissect" ,sbcl-dissect) + ("optima" ,sbcl-optima) + ("cl-reexport" ,sbcl-cl-reexport) + ("local-time" ,sbcl-local-time) + ("uuid" ,sbcl-uuid) + ("alexandria" ,sbcl-alexandria))) + (synopsis "ORM for Common Lisp with migrations and relationships support") + (description "Mito is yet another object relational mapper, and it aims +to be a successor of Integral. + +@itemize +@item Support MySQL, PostgreSQL and SQLite3. +@item Add id (serial/uuid primary key), created_at and updated_at by default +like Ruby's ActiveRecord. +@item Migrations. +@item Database schema versioning. +@end itemize\n") + (license license:llgpl)))) + +(define sbcl-mito-migration + (package + (inherit sbcl-mito-core) + (name "sbcl-mito-migration") + (inputs + `(("mito-core" ,sbcl-mito-core) + ("dbi" ,sbcl-dbi) + ("sxql" ,sbcl-sxql) + ("closer-mop" ,sbcl-closer-mop) + ("cl-reexport" ,sbcl-cl-reexport) + ("uuid" ,sbcl-uuid) + ("alexandria" ,sbcl-alexandria) + ("esrap" ,sbcl-esrap))))) + +(define sbcl-lack-middleware-mito + (package + (inherit sbcl-mito-core) + (name "sbcl-lack-middleware-mito") + (inputs + `(("mito-core" ,sbcl-mito-core) + ("dbi" ,sbcl-dbi))) + (arguments + '(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-build + (lambda _ + (substitute* "lack-middleware-mito.asd" + (("cl-dbi") "dbi")) + #t))))))) + +(define-public sbcl-mito + (package + (inherit sbcl-mito-core) + (name "sbcl-mito") + (inputs + `(("mito-core" ,sbcl-mito-core) + ("mito-migration" ,sbcl-mito-migration) + ("lack-middleware-mito" ,sbcl-lack-middleware-mito) + ("cl-reexport" ,sbcl-cl-reexport))) + (native-inputs + `(("prove" ,sbcl-prove) + ("prove-asdf" ,sbcl-prove-asdf) + ("dbd-mysql" ,sbcl-dbd-mysql) + ("dbd-postgres" ,sbcl-dbd-postgres) + ("dbd-sqlite3" ,sbcl-dbd-sqlite3))) + (arguments + '(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'remove-non-functional-tests + (lambda _ + (substitute* "mito-test.asd" + (("\\(:test-file \"db/mysql\"\\)") "") + (("\\(:test-file \"db/postgres\"\\)") "") + (("\\(:test-file \"dao\"\\)") "") + ;; TODO: migration/sqlite3 should work, re-enable once + ;; upstream has fixed it: + ;; https://github.com/fukamachi/mito/issues/70 + (("\\(:test-file \"migration/sqlite3\"\\)") "") + (("\\(:test-file \"migration/mysql\"\\)") "") + (("\\(:test-file \"migration/postgres\"\\)") "") + (("\\(:test-file \"postgres-types\"\\)") "") + (("\\(:test-file \"mixin\"\\)") "")) + #t))) + ;; TODO: While all enabled tests pass, the phase fails with: + ;; Component MITO-ASD::MITO-TEST not found, required by #<SYSTEM "mito"> + #:tests? #f)))) + +(define-public cl-mito + (sbcl-package->cl-source-package sbcl-mito)) + +(define-public sbcl-kebab + (let ((commit "e7f77644c4e46131e7b8039d191d35fe6211f31b") + (revision "1")) + (package + (name "sbcl-kebab") + (version (git-version "0.1" revision commit)) + (home-page "https://github.com/pocket7878/kebab") + (source + (origin + (method git-fetch) + (uri (git-reference + (url home-page) + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0j5haabnvj0vz0rx9mwyfsb3qzpga9nickbjw8xs6vypkdzlqv1b")))) + (build-system asdf-build-system/sbcl) + (inputs + `(("cl-ppcre" ,sbcl-cl-ppcre) + ("alexandria" ,sbcl-alexandria) + ("cl-interpol" ,sbcl-cl-interpol) + ("split-sequence" ,sbcl-split-sequence))) + (native-inputs + `(("prove-asdf" ,sbcl-prove-asdf) + ("prove" ,sbcl-prove))) + (arguments + ;; Tests passes but the phase fails with + ;; Component KEBAB-ASD::KEBAB-TEST not found, required by #<SYSTEM "kebab">. + `(#:tests? #f)) + (synopsis "Common Lisp case converter") + (description "This Common Lisp library converts strings, symbols and +keywords between any of the following typographical cases: PascalCase, +camelCase, snake_case, kebab-case (lisp-case).") + (license license:llgpl)))) + +(define-public cl-kebab + (sbcl-package->cl-source-package sbcl-kebab)) + +(define-public ecl-kebab + (sbcl-package->ecl-package sbcl-kebab)) + +(define-public sbcl-datafly + (let ((commit "adece27fcbc4b5ea39ad1a105048b6b7166e3b0d") + (revision "1")) + (package + (name "sbcl-datafly") + (version (git-version "0.1" revision commit)) + (home-page "https://github.com/fukamachi/datafly") + (source + (origin + (method git-fetch) + (uri (git-reference + (url home-page) + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "16b78kzmglp2a4nxlxxl7rpf5zaibsgagn0p3c56fsxvx0c4hszv")))) + (build-system asdf-build-system/sbcl) + (inputs + `(("alexandria" ,sbcl-alexandria) + ("iterate" ,sbcl-iterate) + ("optima" ,sbcl-optima) + ("trivial-types" ,sbcl-trivial-types) + ("closer-mop" ,sbcl-closer-mop) + ("cl-syntax-annot" ,sbcl-cl-syntax-annot) + ("sxql" ,sbcl-sxql) + ("dbi" ,sbcl-dbi) + ("babel" ,sbcl-babel) + ("local-time" ,sbcl-local-time) + ("function-cache" ,sbcl-function-cache) + ("jonathan" ,sbcl-jonathan) + ("kebab" ,sbcl-kebab) + ("log4cl" ,sbcl-log4cl))) + (native-inputs + `(("prove-asdf" ,sbcl-prove-asdf) + ("prove" ,sbcl-prove) + ("dbd-sqlite3" ,sbcl-dbd-sqlite3))) + (arguments + ;; TODO: Tests fail with + ;; While evaluating the form starting at line 22, column 0 + ;; of #P"/tmp/guix-build-sbcl-datafly-0.1-1.adece27.drv-0/source/t/datafly.lisp": + ;; Unhandled SQLITE:SQLITE-ERROR in thread #<SB-THREAD:THREAD "main thread" RUNNING + ;; {10009F8083}>: + ;; Error when binding parameter 1 to value NIL. + ;; Code RANGE: column index out of range. + `(#:tests? #f)) + (synopsis "Lightweight database library for Common Lisp") + (description "Datafly is a lightweight database library for Common Lisp.") + (license license:bsd-3)))) + +(define-public cl-datafly + (sbcl-package->cl-source-package sbcl-datafly)) + +(define-public ecl-datafly + (sbcl-package->ecl-package sbcl-datafly)) + +(define-public sbcl-do-urlencode + (let ((commit "199846441dad5dfac5478b8dee4b4e20d107af6a") + (revision "1")) + (package + (name "sbcl-do-urlencode") + (version (git-version "0.0.0" revision commit)) + (home-page "https://github.com/drdo/do-urlencode") + (source + (origin + (method git-fetch) + (uri (git-reference + (url home-page) + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0k2i3d4k9cpci235mwfm0c5a4yqfkijr716bjv7cdlpzx88lazm9")))) + (build-system asdf-build-system/sbcl) + (inputs + `(("alexandria" ,sbcl-alexandria) + ("babel" ,sbcl-babel))) + (synopsis "Percent Encoding (aka URL Encoding) Common Lisp library") + (description "This library provides trivial percent encoding and +decoding functions for URLs.") + (license license:isc)))) + +(define-public cl-do-urlencode + (sbcl-package->cl-source-package sbcl-do-urlencode)) + +(define-public ecl-do-urlencode + (sbcl-package->ecl-package sbcl-do-urlencode)) + +(define-public sbcl-cl-emb + (let ((commit "fd8652174d048d4525a81f38cdf42f4fa519f840") + (revision "1")) + (package + (name "sbcl-cl-emb") + (version (git-version "0.4.3" revision commit)) + (home-page "https://common-lisp.net/project/cl-emb/") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/38a938c2/cl-emb") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1xcm31n7afh5316lwz8iqbjx7kn5lw0l11arg8mhdmkx42aj4gkk")))) + (build-system asdf-build-system/sbcl) + (inputs + `(("cl-ppcre" ,sbcl-cl-ppcre))) + (synopsis "Templating system for Common Lisp") + (description "A mixture of features from eRuby and HTML::Template. You +could name it \"Yet Another LSP\" (LispServer Pages) but it's a bit more than +that and not limited to a certain server or text format.") + (license license:llgpl)))) + +(define-public cl-emb + (sbcl-package->cl-source-package sbcl-cl-emb)) + +(define-public ecl-cl-emb + (sbcl-package->ecl-package sbcl-cl-emb)) + +(define-public sbcl-cl-project + (let ((commit "151107014e534fc4666222d57fec2cc8549c8814") + (revision "1")) + (package + (name "sbcl-cl-project") + (version (git-version "0.3.1" revision commit)) + (home-page "https://github.com/fukamachi/cl-project") + (source + (origin + (method git-fetch) + (uri (git-reference + (url home-page) + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1rmh6s1ncv8s2yrr14ja9wisgg745sq6xibqwb341ikdicxdp26y")))) + (build-system asdf-build-system/sbcl) + (inputs + `(("cl-emb" ,sbcl-cl-emb) + ("cl-ppcre" ,sbcl-cl-ppcre) + ("local-time" ,sbcl-local-time) + ("prove" ,sbcl-prove))) + (arguments + ;; Tests depend on caveman, which in turns depends on cl-project. + '(#:tests? #f)) + (synopsis "Generate a skeleton for modern Common Lisp projects") + (description "This library provides a modern project skeleton generator. +In contract with other generators, CL-Project generates one package per file +and encourages unit testing by generating a system for unit testing, so you +can begin writing unit tests as soon as the project is generated.") + (license license:llgpl)))) + +(define-public cl-project + (sbcl-package->cl-source-package sbcl-cl-project)) + +(define-public ecl-cl-project + (sbcl-package->ecl-package sbcl-cl-project)) + +(define-public sbcl-caveman + (let ((commit "faa5f7e3b364fd7e7096af9a7bb06728b8d80441") ; No release since 2012 + (revision "1")) + (package + (name "sbcl-caveman") + (version (git-version "2.4.0" revision commit)) + (home-page "http://8arrow.org/caveman/") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/fukamachi/caveman/") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0kh0gx05pczk8f7r9qdi4zn1p3d0a2prps27k7jpgvc1dxkl8qhq")))) + (build-system asdf-build-system/sbcl) + (inputs + `(("ningle" ,cl-ningle) + ("lack-request" ,sbcl-lack-request) + ("lack-response" ,sbcl-lack-response) + ("cl-project" ,sbcl-cl-project) + ("dbi" ,sbcl-dbi) + ("cl-syntax-annot" ,sbcl-cl-syntax-annot) + ("myway" ,sbcl-myway) + ("quri" ,sbcl-quri))) + (native-inputs + `(("usocket" ,sbcl-usocket) + ("dexador" ,sbcl-dexador))) + (arguments + `(#:asd-file "caveman2.asd" + #:asd-system-name "caveman2" + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'remove-v1 + (lambda _ + (delete-file-recursively "v1") + (for-each delete-file + '("README.v1.markdown" "caveman.asd" "caveman-test.asd"))))) + ;; TODO: Tests fail with: + ;; writing /gnu/store/...-sbcl-caveman-2.4.0-1.faa5f7e/share/common-lisp/sbcl-source/caveman2/v2/t/tmp/myapp573/tests/myapp573.lisp + ;; While evaluating the form starting at line 38, column 0 + ;; of #P"/tmp/guix-build-sbcl-caveman-2.4.0-1.faa5f7e.drv-0/source/v2/t/caveman.lisp": + ;; Unhandled ASDF/FIND-COMPONENT:MISSING-COMPONENT in thread #<SB-THREAD:THREAD "main thread" RUNNING + ;; {10009F8083}>: + ;; Component "myapp573" not found + #:tests? #f)) + (synopsis "Lightweight web application framework in Common Lisp") + (description "Caveman is intended to be a collection of common parts for +web applications. Caveman2 has three design goals: + +@itemize +@item Be extensible. +@item Be practical. +@item Don't force anything. +@end itemize\n") + (license license:llgpl)))) + +(define-public cl-caveman + (package + (inherit + (sbcl-package->cl-source-package sbcl-caveman)) + (propagated-inputs + `(("ningle" ,cl-ningle))))) + +(define-public ecl-caveman + (sbcl-package->ecl-package sbcl-caveman)) diff --git a/gnu/packages/lisp.scm b/gnu/packages/lisp.scm index 270b3f759e..df901aa34f 100644 --- a/gnu/packages/lisp.scm +++ b/gnu/packages/lisp.scm @@ -372,14 +372,14 @@ an interpreter, a compiler, a debugger, and much more.") (define-public sbcl (package (name "sbcl") - (version "2.0.7") + (version "2.0.8") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/sbcl/sbcl/" version "/sbcl-" version "-source.tar.bz2")) (sha256 - (base32 "0z31khhh9f5hy8316blxwa5iabgn76ya1az5vr4dzash5kcfx5pm")))) + (base32 "1xwrwvps7drrpyw3wg5h3g2qajmkwqs9gz0fdw1ns9adp7vld390")))) (build-system gnu-build-system) (outputs '("out" "doc")) (native-inputs @@ -801,7 +801,7 @@ enough to play the original mainframe Zork all the way through.") (define-public txr (package (name "txr") - (version "242") + (version "243") (source (origin (method git-fetch) @@ -810,7 +810,7 @@ enough to play the original mainframe Zork all the way through.") (commit (string-append "txr-" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "0p38k1hjqmqb2zzydlm94yvll0qkpl70n4ywgs984lbyasn5zyqb")))) + (base32 "08rrl7ac6jnx0zfchzbpvs3qidrbjrl9c7p8s1wms90lp10i18ak")))) (build-system gnu-build-system) (arguments `(#:configure-flags diff --git a/gnu/packages/loko.scm b/gnu/packages/loko.scm new file mode 100644 index 0000000000..f6699877f7 --- /dev/null +++ b/gnu/packages/loko.scm @@ -0,0 +1,86 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2020 Martin Becze <mjbecze@riseup.net> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu packages loko) + #:use-module (guix packages) + #:use-module (guix git-download) + #:use-module (guix build-system gnu) + #:use-module ((guix licenses) #:prefix license:) + #:use-module (gnu packages package-management) + #:use-module (gnu packages guile) + #:use-module (gnu packages guile-xyz) + #:use-module (gnu packages chez)) + +(define-public loko-scheme + (package + (name "loko-scheme") + (version "0.6.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://gitlab.com/weinholt/loko") + (commit (string-append "v" version)))) + (sha256 + (base32 "019jlh3lywy912cfz689c9fxgf4bi5700i9k04g7sl5w5gchj36m")) + (file-name (git-file-name name version)))) + (build-system gnu-build-system) + (arguments + `(;; r7rs tests are still failing as of 0.6.0. + #:tests? #f + #:strip-binaries? #f + #:make-flags + (let ((out (assoc-ref %outputs "out"))) + (list + (string-append "PREFIX=" out) + (string-append "GDB_AUTOLOAD_PATH=" out "/share/gdb/auto-load"))) + #:phases + (modify-phases %standard-phases + (delete 'configure) + (add-before 'build 'akku-fixes + (lambda* (#:key inputs #:allow-other-keys) + (delete-file "Akku.lock") + (substitute* "Akku.manifest" + (("\\(depends.*") "(depends)")) + (invoke "akku" "install") + (let ((dest "./.akku/lib/") + (source "/share/guile/site/3.0/")) + (for-each + (lambda (name) + ;; Symlink the scheme libraries so that Akku can find them + (symlink (string-append (assoc-ref inputs name) source name) + (string-append dest name))) + '("struct" "laesare" "pfds" "machine-code"))) + (substitute* ".akku/env" + (("/bin/sh") (which "sh"))) + #t))))) + (native-inputs + `(("akku" ,akku) + ("chez-scheme" ,chez-scheme) + ("struct" ,guile-struct-pack) + ("laesare" ,guile-laesare) + ("pfds" ,guile-pfds) + ("machine-code" ,guile-machine-code))) + (home-page "https://scheme.fail") + (synopsis "Implementation of the algorithmic language Scheme") + (description + "Loko Scheme is intended to be a platform for application and operating +system development. It is written purely in Scheme and some assembler +(i.e. no C code at the bottom). Both the R6RS and the R7RS standards are +supported.") + (license license:agpl3+))) diff --git a/gnu/packages/lxqt.scm b/gnu/packages/lxqt.scm index 21587609ce..af452a9903 100644 --- a/gnu/packages/lxqt.scm +++ b/gnu/packages/lxqt.scm @@ -591,7 +591,8 @@ of other programs.") ("qtsvg" ,qtsvg) ("qtx11extras" ,qtx11extras) ("solid" ,solid) - ("xcb-util" ,xcb-util))) + ("xcb-util" ,xcb-util) + ("xkeyboard-config" ,xkeyboard-config))) (native-inputs `(("pkg-config" ,pkg-config) ("lxqt-build-tools" ,lxqt-build-tools) @@ -619,7 +620,15 @@ of other programs.") (("\\$\\{LXQT_TRANSLATIONS_DIR\\}") (string-append (assoc-ref outputs "out") "/share/lxqt/translations"))) - #t))))) + #t)) + (add-after 'unpack 'set-xkeyboard-config-file-path + (lambda* (#:key inputs #:allow-other-keys) + ;; Set the path to xkeyboard-config. + (let ((xkb (assoc-ref inputs "xkeyboard-config"))) + (substitute* "plugin-kbindicator/src/x11/kbdlayout.cpp" + (("/usr/share/X11/xkb/rules/evdev.xml") + (string-append xkb "/share/X11/xkb/rules/evdev.xml"))) + #t)))))) (home-page "https://lxqt.github.io") (synopsis "The LXQt desktop panel") (description "lxqt-panel represents the taskbar of LXQt.") diff --git a/gnu/packages/machine-learning.scm b/gnu/packages/machine-learning.scm index 1f4c2e23ea..89345fa5fd 100644 --- a/gnu/packages/machine-learning.scm +++ b/gnu/packages/machine-learning.scm @@ -660,42 +660,6 @@ synchronization, thread-safety, concurrent data structures, and non-blocking I/O.") (license license:asl2.0))) -(define-public r-adaptivesparsity - (package - (name "r-adaptivesparsity") - (version "1.6") - (source (origin - (method url-fetch) - (uri (cran-uri "AdaptiveSparsity" version)) - (sha256 - (base32 - "0imr5m8mll9j6n4icsv6z9rl5kbnwsp9wvzrg7n90nnmcxq2cz91")))) - (properties - `((upstream-name . "AdaptiveSparsity"))) - (build-system r-build-system) - (arguments - `(#:phases - (modify-phases %standard-phases - (add-after 'unpack 'link-against-armadillo - (lambda _ - (substitute* "src/Makevars" - (("PKG_LIBS=" prefix) - (string-append prefix "-larmadillo")))))))) - (propagated-inputs - `(("r-mass" ,r-mass) - ("r-matrix" ,r-matrix) - ("r-rcpp" ,r-rcpp) - ("r-rcpparmadillo" ,r-rcpparmadillo))) - (inputs - `(("armadillo" ,armadillo))) - (home-page "https://cran.r-project.org/web/packages/AdaptiveSparsity") - (synopsis "Adaptive sparsity models") - (description - "This package implements the Figueiredo machine learning algorithm for -adaptive sparsity and the Wong algorithm for adaptively sparse gaussian -geometric models.") - (license license:lgpl3+))) - (define-public gemmlowp-for-tensorflow ;; The commit hash is taken from "tensorflow/workspace.bzl". (let ((commit "38ebac7b059e84692f53e5938f97a9943c120d98") @@ -1049,7 +1013,16 @@ the following advantages: (modify-phases %standard-phases (add-after 'unpack 'make-files-writable (lambda _ - (for-each make-file-writable (find-files "." ".*")) #t))))) + (for-each make-file-writable (find-files "." ".*")) #t)) + (add-after 'install 'install-more-headers + (lambda* (#:key outputs #:allow-other-keys) + (for-each + (lambda (file) + (install-file file (string-append + (assoc-ref outputs "out") + "/include/vowpalwabbit"))) + (find-files "vowpalwabbit" "\\.h$")) + #t))))) (build-system gnu-build-system) (home-page "https://github.com/JohnLangford/vowpal_wabbit") (synopsis "Fast machine learning library for online learning") diff --git a/gnu/packages/mail.scm b/gnu/packages/mail.scm index 81dc5b8eec..2244653724 100644 --- a/gnu/packages/mail.scm +++ b/gnu/packages/mail.scm @@ -1,6 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Ludovic Courtès <ludo@gnu.org> -;;; Copyright © 2014, 2015, 2017 Mark H Weaver <mhw@netris.org> +;;; Copyright © 2014, 2015, 2017, 2020 Mark H Weaver <mhw@netris.org> ;;; Copyright © 2014 Ian Denhardt <ian@zenhack.net> ;;; Copyright © 2014 Sou Bunnbu <iyzsong@gmail.com> ;;; Copyright © 2014, 2019 Julien Lepiller <julien@lepiller.eu> @@ -34,6 +34,7 @@ ;;; Copyright © 2020 Eric Brown <ecbrown@ericcbrown.com> ;;; Copyright © 2020 Maxim Cournoyer <maxim.cournoyer@gmail.com> ;;; Copyright © 2020 Michael Rohleder <mike@rohleder.de> +;;; Copyright © 2020 Alexey Abramov <levenson@mmer.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -138,6 +139,7 @@ #:use-module (guix packages) #:use-module (guix download) #:use-module (guix git-download) + #:use-module (guix svn-download) #:use-module (guix utils) #:use-module (guix build-system gnu) #:use-module (guix build-system guile) @@ -393,7 +395,7 @@ to run without any changes.") (define-public fetchmail (package (name "fetchmail") - (version "6.4.8") + (version "6.4.12") (source (origin (method url-fetch) @@ -401,7 +403,7 @@ to run without any changes.") (version-major+minor version) "/" "fetchmail-" version ".tar.xz")) (sha256 - (base32 "1g893dr3982vrqzxybmflnqfmd1q6yipd9krvxn0avhlrrp97k96")))) + (base32 "11s83af63gs9nnrjb66yq58xriyvi8hzj4ykxp3kws5z3nby111b")))) (build-system gnu-build-system) (inputs `(("openssl" ,openssl))) @@ -428,7 +430,7 @@ aliasing facilities to work just as they would on normal mail.") (define-public mutt (package (name "mutt") - (version "1.14.6") + (version "1.14.7") (source (origin (method url-fetch) (uri (list @@ -438,7 +440,7 @@ aliasing facilities to work just as they would on normal mail.") version ".tar.gz"))) (sha256 (base32 - "0i0q6vwhnb1grimsrpmz8maw255rh9k0laijzxkry6xqa80jm5s7")) + "0r58xnjgkw0kmnnzhb32mk5gkkani5kbi5krybpbag156fqhgxg4")) (patches (search-patches "mutt-store-references.patch")))) (build-system gnu-build-system) (inputs @@ -625,6 +627,69 @@ Extension (MIME).") (base32 "0slzlzcr3h8jikpz5a5amqd0csqh2m40gdk910ws2hnaf5m6hjbi")))))) +(define-public altermime + (package + (name "altermime") + (version "0.3.10") + (source (origin + (method url-fetch) + (uri (string-append "http://pldaniels.com/altermime/altermime-" + version ".tar.gz")) + (sha256 + (base32 + "0vn3vmbcimv0n14khxr1782m76983zz9sf4j2kz5v86lammxld43")))) + (build-system gnu-build-system) + (arguments + `(#:make-flags (list "CC=gcc" + (string-append "PREFIX=" (assoc-ref %outputs "out"))) + #:tests? #f ; there are none + #:phases + (modify-phases %standard-phases + (delete 'configure) + (add-after 'unpack 'fix-bugs + (lambda _ + (substitute* "MIME_headers.c" + (("hinfo->filename, sizeof\\(hinfo->name\\)") + "hinfo->filename, sizeof(hinfo->filename)") + (("memset\\(hinfo->defects, 0, _MIMEH_DEFECT_ARRAY_SIZE\\);") + "memset(hinfo->defects, 0, sizeof(hinfo->defects));")) + (substitute* "pldstr.c" + (("if \\(\\(st->start\\)&&\\(st->start != '\\\\0'\\)\\)") + "if ((st->start)&&(*st->start != '\\0'))")) + (substitute* "qpe.c" + (("if \\(lineend != '\\\\0'\\)") + "if (*lineend != '\\0')")) + #t)) + (add-after 'unpack 'install-to-prefix + (lambda _ + (substitute* "Makefile" + (("/usr/local") "${PREFIX}") + (("cp altermime.*") "install -D -t ${PREFIX}/bin altermime\n")) + #t)) + (add-after 'unpack 'disable-Werror + (lambda _ + (substitute* "Makefile" + (("-Werror") "")) + #t))))) + (home-page "https://pldaniels.com/altermime/") + (synopsis "Modify MIME-encoded messages") + (description + "alterMIME is a small program which is used to alter your mime-encoded +mailpack. What can alterMIME do? + +@enumerate +@item Insert disclaimers, +@item insert arbitary X-headers, +@item modify existing headers, +@item remove attachments based on filename or content-type, +@item replace attachments based on filename. +@end enumerate +.") + ;; MIME_headers.c is distributed under BSD-3; the rest of the code is + ;; published under the alterMIME license. + (license (list (license:non-copyleft "file://LICENSE") + license:bsd-3)))) + (define-public bogofilter (package (name "bogofilter") @@ -926,14 +991,14 @@ invoking @command{notifymuch} from the post-new hook.") (define-public notmuch (package (name "notmuch") - (version "0.29.3") + (version "0.31") (source (origin (method url-fetch) (uri (string-append "https://notmuchmail.org/releases/notmuch-" version ".tar.xz")) (sha256 (base32 - "0dfwa38vgnxk9cvvpza66szjgp8lir6iz6yy0cry9593lywh9xym")))) + "1543l57viqzqikjgfzp2abpwz3p0k2iq0b1b3wmn31lwaghs07sp")))) (build-system gnu-build-system) (arguments `(#:modules ((guix build gnu-build-system) @@ -963,6 +1028,13 @@ invoking @command{notifymuch} from the post-new hook.") (string-append "--prefix=" out) (string-append "--emacslispdir=" elisp) (string-append "--emacsetcdir=" elisp))))) + (add-before 'check 'disable-failing-tests + ;; FIXME: Investigate why these tests are failing, + ;; and try removing this for notmuch versions > 0.31. + (lambda _ + (substitute* "test/T356-protected-headers.sh" + (("\\$NOTMUCH_GMIME_X509_CERT_VALIDITY") "0")) + #t)) (add-before 'check 'prepare-test-environment (lambda _ (setenv "TEST_CC" "gcc") @@ -1134,7 +1206,7 @@ useful features.") (define-public libetpan (package (name "libetpan") - (version "1.9.3") + (version "1.9.4") (source (origin (method git-fetch) (uri (git-reference @@ -1142,7 +1214,7 @@ useful features.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "19g4qskg71jv7sxfxsdkjmrxk9mk5kf9b6fhw06g6wvm3205n95f")))) + (base32 "0g7an003simfdn7ihg9yjv7hl2czsmjsndjrp39i7cad8icixscn")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf-wrapper) ("automake" ,automake) @@ -1411,6 +1483,7 @@ facilities for checking incoming mail.") (define-public dovecot (package (name "dovecot") + ;; Also update dovecot-pigeonhole when updating to a new minor version. (version "2.3.11.3") (source (origin @@ -1476,6 +1549,83 @@ It supports mbox/Maildir and its own dbox/mdbox formats.") (license (list license:lgpl2.1 license:expat (license:non-copyleft "file://COPYING"))))) +(define-public dovecot-pigeonhole + (let ((dovecot-version (version-major+minor (package-version dovecot)))) + (package + (name "dovecot-pigeonhole") + (version "0.5.11") + (source + (origin + (method url-fetch) + (uri (string-append + "https://pigeonhole.dovecot.org/releases/" dovecot-version "/" + "dovecot-" dovecot-version "-pigeonhole-" version ".tar.gz")) + (sha256 + (base32 "1w5mryv6izh1gv7davnl94rb0pvh5bxl2bydzbfla1b83x22m5qb")) + (modules '((guix build utils))) + (snippet + '(begin + ;; RFC licencing is ad-hoc and rarely free. Remove them all. + (delete-file-recursively "doc/rfc") + (substitute* "configure" + (("doc/rfc/Makefile") "")) + (substitute* "doc/Makefile.in" + (("rfc ") "")) + #t)))) + (build-system gnu-build-system) + (arguments + `(#:configure-flags + (list "--disable-static" + "--with-dovecot-install-dirs=no" + (string-append "--with-dovecot=" + (assoc-ref %build-inputs "dovecot") + "/lib/dovecot") + (string-append "--docdir=" + (assoc-ref %outputs "out") + "/share/doc/" ,name "-" ,version) + (string-append "--with-moduledir=" + (assoc-ref %outputs "out") + "/lib/dovecot")) + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'patch-file-names + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (libexec (string-append out "/libexec/dovecot"))) + (substitute* "src/managesieve/managesieve-settings.c" + (("\\.executable = \"managesieve\"") + (string-append ".executable = \"" libexec + "/managesieve\""))) + (substitute* "src/managesieve-login/managesieve-login-settings.c" + (("\\.executable = \"managesieve-login\"") + (string-append ".executable = \"" libexec + "/managesieve-login\""))) + #t)))))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (inputs + `(("dovecot" ,dovecot))) + (home-page "https://pigeonhole.dovecot.org") + (synopsis "Dovecot Sieve mail filtering plug-in and ManageSieve service") + (description + "Pigeonhole adds support for the Sieve language (RFC 5228) and the +ManageSieve protocol (RFC 5804) to the Dovecot e-mail server. + +@dfn{Sieve} is a language for filtering incoming mail. Messages can be +forwarded or sorted into separate folders. Unwanted messages can be rejected +or discarded, and, when the user is not available, the Sieve interpreter can +send an automated reply. + +Sieve is meant to be simple, extensible, and system-independent. The +intention is to make it impossible to write anything more complex (and +dangerous) than simple mail filters. Unlike most other mail filtering script +languages, Sieve does not allow users to execute arbitrary programmes. + +Through the @dfn{ManageSieve} protocol, users can remotely manage their Sieve +scripts without needing file system access. The server accepts only valid +scripts to prevent embarrassing errors later on.") + (license license:lgpl2.1)))) + (define-public dovecot-trees (package (name "dovecot-trees") @@ -2257,7 +2407,6 @@ etc; plus other capabilities including support for MIME and powerful user customization features.") (license license:gpl2+))) - (define-public sendmail (package (name "sendmail") @@ -2340,6 +2489,70 @@ transfer protocols.") (license (license:non-copyleft "file://LICENSE" "See LICENSE in the distribution.")))) +(define-public sieve-connect + (package + (name "sieve-connect") + (version "0.90") + (source + (origin + (method url-fetch) + (uri (string-append "https://people.spodhuis.org/phil.pennock/software/" + "sieve-connect-" version ".tar.bz2")) + (sha256 + (base32 "00vnyzr67yr2ilnprbd388gfnwmrmbdx1jsig9d0n5q902jqn62a")))) + (build-system gnu-build-system) + (arguments + `(#:make-flags + (list (string-append "PREFIX=" (assoc-ref %outputs "out"))) + #:tests? #f ; no test suite + #:phases + (modify-phases %standard-phases + (delete 'configure) ; no configure script + (add-before 'install 'create-output-directories + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (for-each (lambda (subdirectory) + (mkdir-p (string-append out "/" subdirectory))) + (list "bin" + "man/man1")) + #t))) + (add-after 'install 'wrap-program + (lambda* (#:key inputs outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out")) + (path (getenv "PERL5LIB"))) + (wrap-script (string-append out "/bin/sieve-connect") + `("PERL5LIB" ":" = (,path))) + #t)))))) + (inputs + `(("guile" ,guile-3.0) ; for wrap-script + ("perl" ,perl) + ("perl-authen-sasl" ,perl-authen-sasl) + ("perl-io-socket-inet6" ,perl-io-socket-inet6) + ("perl-io-socket-ssl" ,perl-io-socket-ssl) + ("perl-net-dns" ,perl-net-dns) + ("perl-socket6" ,perl-socket6) + ("perl-term-readkey" ,perl-term-readkey) + ("perl-term-readline" ,perl-term-readline-gnu))) + (home-page + "https://people.spodhuis.org/phil.pennock/software/#sieve-connect") + (synopsis "ManageSieve client for managing Sieve e-mail filters") + (description + "Sieve-connect lets you view, upload, edit, delete, and otherwise manage +Sieve scripts on any mail server that speaks the @dfn{ManageSieve} protocol, +as specifed in RFC 5804. + +@dfn{Sieve} (RFC 5228) is a specialised language for e-mail filtering. Sieve +scripts are stored on the server and run whenever mail arrives. They can +automatically sort new messages into folders, silently reject them, send an +automated response, and more. + +@command{sieve-connect} is designed to be both a tool which can be invoked +from scripts as well as a decent interactive client. It supports TLS for +connection privacy, as well as authentication with SASL or GSSAPI client +certificates. It should be a drop-in replacement for @command{sieveshell} +from the Cyrus IMAP project.") + (license license:bsd-3))) + (define-public opensmtpd (package (name "opensmtpd") @@ -2480,6 +2693,125 @@ for OpenSMTPD to extend its functionality.") (license (list license:bsd-2 license:bsd-3 ; openbsd-compat license:isc)))) ; everything else +(define libopensmtpd + ;; Private source dependency of opensmtpd-filter-dkimsign (by the same + ;; author), until any project actually uses it in its compiled form. + (let ((revision 48)) + (package + (name "libopensmtpd") + (version (format #f "0.0.0-~a" revision)) + (source + (origin + (method svn-fetch) + (uri (svn-reference + (url "http://imperialat.at/dev/libopensmtpd/") + (revision revision))) + (sha256 + (base32 "04fgibpi6q0c3468ww3z7gsvraz0gyfps0c2dj8mdyri636c0x0s")) + (file-name (git-file-name name version)))) + (build-system gnu-build-system) + (arguments + `(#:make-flags + (list "-f" "Makefile.gnu" + (string-append "CC=" ,(cc-for-target)) + (string-append "LOCALBASE=" (assoc-ref %outputs "out"))) + #:tests? #f ; no test suite + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'inherit-ownership + (lambda _ + (substitute* "Makefile.gnu" + (("-o \\$\\{BINOWN\\} -g \\$\\{BINGRP\\}") "")) + #t)) + (delete 'configure) ; no configure script + (add-before 'install 'create-output-directories + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (mkdir-p (string-append out "/lib")) + #t))) + (add-after 'install 'install-header-file + (lambda* (#:key make-flags outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (mkdir-p (string-append out "/include")) + (apply invoke "make" "includes" make-flags)))) + (add-after 'install 'install-man-page + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (man3 (string-append out "/share/man/man3"))) + ;; There is no make target for this. + (install-file "osmtpd_run.3" man3) + #t)))))) + (inputs + `(("libevent" ,libevent))) + (home-page "http://imperialat.at/dev/libopensmtpd/") + (synopsis "OpenSMTPd filter C API") + (description + "The @code{osmtpd} API is an event-based C programming interface for +writing OpenSMTPd filters.") + (license license:expat)))) + +(define-public opensmtpd-filter-dkimsign + (package + (name "opensmtpd-filter-dkimsign") + ;; The .arch repackaging provides not only a usable Makefile, but patches + ;; the source to actually build on GNU, e.g., by making pledge() optional. + ;; It's effectively the portable branch that upstream lacks at this time. + (version "0.2.arch2") ; also update both native-inputs + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/de-vri-es/filter-dkimsign") + (commit (string-append "v" version)))) + (sha256 + (base32 "1dv6184h0gq2safnc7ln4za3arbafzc1xwkgwmiihqcjvdyxig0c")) + (file-name (git-file-name name version)))) + (build-system gnu-build-system) + (arguments + `(#:make-flags + (list (string-append "CC=" ,(cc-for-target))) + #:tests? #f ; no test suite + #:phases + (modify-phases %standard-phases + (replace 'unpack + (lambda* (#:key source inputs #:allow-other-keys) + (copy-recursively source "filter-dkimsign") + (copy-recursively (assoc-ref inputs "libopensmtpd-source") + "libopensmtpd") + (copy-file (assoc-ref inputs "Makefile") "Makefile") + #t)) + (delete 'configure) ; no configure script + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (libexec (string-append out "/libexec/opensmtpd")) + (man8 (string-append out "/share/man/man8"))) + (chdir "filter-dkimsign") + (install-file "filter-dkimsign" libexec) + (install-file "filter-dkimsign.8" man8) + #t)))))) + (native-inputs + `(("Makefile" + ,(origin + (method url-fetch) + (uri (string-append + "https://aur.archlinux.org/cgit/aur.git/plain/Makefile" + "?h=opensmtpd-filter-dkimsign" + "&id=58393470477a2ff2a58f9d72f5d851698067539f")) + (sha256 + (base32 "0da5qr9hfjkf07ybvfva967njmf2x0b82z020r6v5f93jzsbqx92")) + (file-name (string-append name "-" version "-Makefile")))) + ("libopensmtpd-source" ,(package-source libopensmtpd)))) + (inputs + `(("libevent" ,libevent) + ("libressl" ,libressl))) ; openssl works too but follow opensmtpd + (home-page "http://imperialat.at/dev/filter-dkimsign/") + (synopsis "OpenSMTPd filter for signing mail with DKIM") + (description + "The @command{filter-dkimsign} OpenSMTPd filter signs outgoing e-mail +messages with @acronym{DKIM, DomainKeys Identified Mail} (RFC 4871).") + (license license:expat))) + (define-public mailman (package (name "mailman") @@ -2930,10 +3262,7 @@ operators and scripters.") (define-public alpine (package (name "alpine") - ;; Upstream doesn't use git tags, but does ‘tag’ their releases in the - ;; commit message. Hence the lack of GIT-VERSIONing despite using a commit - ;; ID below. Don't forget to update it… - (version "2.22") + (version "2.23.2") (source (origin (method git-fetch) @@ -2943,10 +3272,10 @@ operators and scripters.") ;; http://alpine.freeiz.com/alpine/readme/README.patches (uri (git-reference (url "http://repo.or.cz/alpine.git") - (commit "b50297779a4becb9ceca9c6b5b375d526fe3df78"))) + (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "06js44fvdl7l33hfd4lsxpcd1cz3c0h796cswyzz0lkrzx89yl48")) + (base32 "16ldmmcymrnpnbfc1kb2rhac7nzlc87wjawic4wfinkphd124d1y")) (modules '((guix build utils))) (snippet '(begin @@ -3443,23 +3772,22 @@ designed for keyboard-oriented operation.") (lambda _ (invoke "python" "-m" "authres" "-v")))))) (home-page "https://launchpad.net/authentication-results-python") - (synopsis "Email Authentication Results Header Module") + (synopsis "Authentication-Results email header creator and parser") (description - "This module can be used to generate and parse RFC 5451/7001/7601 -Authentication-Results headers. It also supports Authentication Results -extensions: + "This Python module can be used to generate and parse RFC 5451/7001/7601 +@code{Authentication-Results} email headers. It supports extensions such as: @itemize @item RFC 5617 DKIM/ADSP -@item RFC 6008 DKIM signature identification (header.b) -@item RFC 6212 Vouch By Reference (VBR) -@item RFC 6577 Sender Policy Framework (SPF) -@item RFC 7281 Authentication-Results Registration for S/MIME -@item RFC 7293 The Require-Recipient-Valid-Since Header Field -@item RFC 7489 Domain-based Message Authentication, Reporting, and Conformance (DMARC) -@item Authenticated Recieved Chain (ARC) (draft-ietf-dmarc-arc-protocol-08) -@end itemize -Note: RFC 7601 obsoletes RFC 5451, 6577, 7001, and 7410. Authres supports the -current standard. No backward compatibility issues have been noted.") +@item RFC 6008 DKIM signature identification (@code{header.b}) +@item RFC 6212 @acronym{VBR, Vouch By Reference} +@item RFC 6577 @acronym{SPF, Sender Policy Framework} +@item RFC 7281 @code{Authentication-Results} registration for S/MIME +@item RFC 7293 The @code{Require-Recipient-Valid-Since} header field +@item RFC 7489 @acronym{DMARC, Domain-based Message Authentication Reporting +and Conformance} +@item @acronym{ARC, Authenticated Received Chain} +(draft-ietf-dmarc-arc-protocol-08) +@end itemize\n") (license license:asl2.0))) (define-public python-dkimpy diff --git a/gnu/packages/mate.scm b/gnu/packages/mate.scm index b0fca83d3e..77e55731a3 100644 --- a/gnu/packages/mate.scm +++ b/gnu/packages/mate.scm @@ -1173,15 +1173,14 @@ Re-decorates windows on un-maximise. (define-public mate-screensaver (package (name "mate-screensaver") - (version "1.24.0") + (version "1.24.1") (source (origin (method url-fetch) (uri (string-append "mirror://mate/" (version-major+minor version) "/" - name "-" version ".tar.xz")) + "mate-screensaver-" version ".tar.xz")) (sha256 - (base32 - "0gpw6x9d0b77f14vjl7ghq5dya1mwcnvmgigg00manfwlksr5zby")))) + (base32 "0imb1z2yvz1h95dzq396c569kkxys9mb2dyc6qxxxcnc5w02a2dw")))) (build-system glib-or-gtk-build-system) (arguments `(#:configure-flags @@ -1398,15 +1397,14 @@ can be used as backgrounds in the MATE Desktop environment.") (define-public pluma (package (name "pluma") - (version "1.24.0") + (version "1.24.1") (source (origin (method url-fetch) (uri (string-append "mirror://mate/" (version-major+minor version) "/" name "-" version ".tar.xz")) (sha256 - (base32 - "1vmndhlhy3qkf3xs5kkv0xhbv5ar25pqz0kp17hc4qhgjzycfr0r")))) + (base32 "1sgc5f480icr2ans6gd3akvcax58mr4jp3zjk3xn7bx1mw9i299f")))) (build-system glib-or-gtk-build-system) (arguments `(; Tests can not succeed. @@ -1448,15 +1446,14 @@ can be used as backgrounds in the MATE Desktop environment.") (define-public mate-system-monitor (package (name "mate-system-monitor") - (version "1.24.0") + (version "1.24.1") (source (origin (method url-fetch) (uri (string-append "mirror://mate/" (version-major+minor version) "/" - name "-" version ".tar.xz")) + "mate-system-monitor-" version ".tar.xz")) (sha256 - (base32 - "1cb36lrsn4fhsryl2kl4yq0qhp1p4r7k21w3fc2ywjga8fdxx6y5")))) + (base32 "1i2r4lw6xsk972yp15g5hm8p8xx9pp6jmcvvzbdq80xyx3x898qz")))) (build-system glib-or-gtk-build-system) (native-inputs `(("autoconf" ,autoconf) diff --git a/gnu/packages/maths.scm b/gnu/packages/maths.scm index 39ff242d6e..df4d39f900 100644 --- a/gnu/packages/maths.scm +++ b/gnu/packages/maths.scm @@ -135,7 +135,8 @@ #:use-module (gnu packages version-control) #:use-module (gnu packages wxwidgets) #:use-module (gnu packages xml) - #:use-module (srfi srfi-1)) + #:use-module (srfi srfi-1) + #:use-module (srfi srfi-26)) (define-public aris (package @@ -640,7 +641,7 @@ computing convex hulls.") (define-public lrslib (package (name "lrslib") - (version "7.0a") + (version "7.1") (source (origin (method url-fetch) @@ -649,7 +650,7 @@ computing convex hulls.") (string-delete #\. version) ".tar.gz")) (sha256 (base32 - "034fa45r9hwx6ljmgpxk2872q34nklkalpdkc6s9hqw57rivi36k")))) + "05kq3hzam31dlmkccv3v358r478kpvx76mw37ka12c6ypwv5dsnk")))) (build-system gnu-build-system) (inputs `(("gmp" ,gmp))) @@ -1756,6 +1757,84 @@ linear and quadratic objectives. There are limited facilities for nonlinear and quadratic objectives using the Simplex algorithm.") (license license:epl1.0))) +(define-public libflame + (package + (name "libflame") + (version "5.2.0") + (outputs '("out" "static")) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/flame/libflame") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1n6lf0wvpp77lxqlr721h2jbfbzigphdp19wq8ajiccilcksh7ay")))) + (build-system gnu-build-system) + (arguments + `(#:configure-flags + ;; Sensible defaults: https://github.com/flame/libflame/issues/28 + (list "--enable-dynamic-build" + "--enable-max-arg-list-hack" + "--enable-lapack2flame" + "--enable-verbose-make-output" + "--enable-multithreading=pthreads" ; Openblas isn't built with openmp. + ,@(if (any (cute string-prefix? <> (or (%current-target-system) + (%current-system))) + '("x86_64" "i686")) + '("--enable-vector-intrinsics=sse") + '()) + "--enable-supermatrix" + "--enable-memory-alignment=16" + "--enable-ldim-alignment") + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'patch-/usr/bin/env-bash + (lambda _ + (substitute* "build/config.mk.in" + (("/usr/bin/env bash") (which "bash"))) + #t)) + (replace 'check + (lambda* (#:key tests? #:allow-other-keys) + (substitute* "test/Makefile" + (("LIBBLAS .*") "LIBBLAS = -lblas\n") + (("LIBLAPACK .*") "LIBLAPACK = -llapack\n")) + (if tests? + (with-directory-excursion "test" + (mkdir "obj") + (invoke "make") + (invoke "./test_libflame.x")) + #t))) + (add-after 'install 'install-static + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out")) + (static (assoc-ref outputs "static"))) + (mkdir-p (string-append static "/lib")) + (rename-file (string-append out "/lib/libflame.a") + (string-append static "/lib/libflame.a")) + (install-file (string-append out "/include/FLAME.h") + (string-append static "/include")) + #t)))))) + (inputs + `(("gfortran" ,gfortran))) + (native-inputs + `(("lapack" ,lapack) + ("openblas" ,openblas) + ("perl" ,perl) + ("python" ,python-wrapper))) + (home-page "https://github.com/flame/libflame") + (synopsis "High-performance object-based library for DLA computations") + (description "@code{libflame} is a portable library for dense matrix +computations, providing much of the functionality present in LAPACK, developed +by current and former members of the @acronym{SHPC, Science of High-Performance +Computing} group in the @url{https://www.ices.utexas.edu/, Institute for +Computational Engineering and Sciences} at The University of Texas at Austin. +@code{libflame} includes a compatibility layer, @code{lapack2flame}, which +includes a complete LAPACK implementation.") + (license license:bsd-3))) + (define-public ceres (package (name "ceres-solver") @@ -2589,7 +2668,7 @@ bindings to almost all functions of SLEPc.") (define-public metamath (package (name "metamath") - (version "0.183") + (version "0.192") (source (origin (method git-fetch) @@ -2598,7 +2677,7 @@ bindings to almost all functions of SLEPc.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "1jjf4fy6j53i40dh0yv0f9sngnw4gs24cig99vsg3q0303pwrhg7")))) + (base32 "1k31zw36h2b0w5r6sbn9qc0v4hj42vw53qlhf5l7q2h3p5qlzvic")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) diff --git a/gnu/packages/messaging.scm b/gnu/packages/messaging.scm index 9dc3e58ef9..f8bb673734 100644 --- a/gnu/packages/messaging.scm +++ b/gnu/packages/messaging.scm @@ -23,6 +23,7 @@ ;;; Copyright © 2020 Marius Bakke <mbakke@fastmail.com> ;;; Copyright © 2020 Reza Alizadeh Majd <r.majd@pantherx.org> ;;; Copyright © 2020 Jonathan Brielmaier <jonathan.brielmaier@web.de> +;;; Copyright © 2020 Mason Hock <chaosmonk@riseup.net> ;;; ;;; This file is part of GNU Guix. ;;; @@ -79,6 +80,7 @@ #:use-module (gnu packages lua) #:use-module (gnu packages man) #:use-module (gnu packages markup) + #:use-module (gnu packages mpd) #:use-module (gnu packages ncurses) #:use-module (gnu packages networking) #:use-module (gnu packages pcre) @@ -93,6 +95,7 @@ #:use-module (gnu packages python-xyz) #:use-module (gnu packages qt) #:use-module (gnu packages readline) + #:use-module (gnu packages sphinx) #:use-module (gnu packages sqlite) #:use-module (gnu packages tcl) #:use-module (gnu packages texinfo) @@ -119,6 +122,59 @@ #:use-module (guix packages) #:use-module (guix utils)) +(define-public poezio + (package + (name "poezio") + (version "0.13.1") + (source + (origin + (method git-fetch) + (uri + (git-reference + (url "https://lab.louiz.org/poezio/poezio.git") + (commit + (string-append "v" version)))) + (file-name + (git-file-name name version)) + (sha256 + (base32 "041y61pcbdb86s04qwp8s1g6bp84yskc7vdizwpi2hz18y01x5fy")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'patch + (lambda _ + (substitute* "setup.py" + (("'CC', 'cc'") + "'CC', 'gcc'")) + #t))))) + (native-inputs + `(("pkg-config" ,pkg-config) + ("python-setuptools" ,python-setuptools) + ("python-sphinx" ,python-sphinx))) + (inputs + `(("python-mpd2" ,python-mpd2) + ("python-potr" ,python-potr) + ("python-pyasn1" ,python-pyasn1) + ("python-pyasn1-modules" ,python-pyasn1-modules) + ("python-pygments" ,python-pygments) + ("python-pyinotify" ,python-pyinotify) + ;("python" ,python) + ("python-qrcode" ,python-qrcode) + ("python-slixmpp" ,python-slixmpp))) + (synopsis "Console Jabber/XMPP Client") + (description "Poezio is a free console XMPP client (the protocol on which +the Jabber IM network is built). +Its goal is to let you connect very easily (no account creation needed) to the +network and join various chatrooms, immediately. It tries to look like the +most famous IRC clients (weechat, irssi, etc). Many commands are identical and +you won't be lost if you already know these clients. Configuration can be +made in a configuration file or directly from the client. +You'll find the light, fast, geeky and anonymous spirit of IRC while using a +powerful, standard and open protocol.") + (home-page "https://poez.io/en/") + (license license:zlib))) + (define-public libotr (package (name "libotr") @@ -227,6 +283,29 @@ identi.ca and status.net).") (home-page "https://www.bitlbee.org/") (license (list license:gpl2+ license:bsd-2)))) +(define-public bitlbee-purple + ;; This variant uses libpurple, which provides support for more protocols at + ;; the expense of a much bigger closure. + (package/inherit bitlbee + (name "bitlbee-purple") + (synopsis "IRC to instant messaging gateway (using Pidgin's libpurple)") + (inputs `(("purple" ,pidgin) + ,@(package-inputs bitlbee))) + (arguments + (substitute-keyword-arguments (package-arguments bitlbee) + ((#:phases phases '%standard-phases) + `(modify-phases ,phases + (replace 'configure ;add "--purple=1" + (lambda* (#:key outputs #:allow-other-keys) + (invoke "./configure" + (string-append "--prefix=" + (assoc-ref outputs "out")) + "--otr=1" "--purple=1"))))) + ((#:tests? _ #t) + ;; XXX: Tests fail to link, and ./configure says that it's "supported + ;; on a best-effort basis" anyway. + #f))))) + (define-public bitlbee-discord (package (name "bitlbee-discord") @@ -569,14 +648,14 @@ compromised.") (define-public znc (package (name "znc") - (version "1.8.1") + (version "1.8.2") (source (origin (method url-fetch) (uri (string-append "https://znc.in/releases/archive/znc-" version ".tar.gz")) (sha256 (base32 - "0hb1v167aa6gv5bcwz352l6b8gnd74ymjw92y4x882l099hzg59i")))) + "03fyi0j44zcanj1rsdx93hkdskwfvhbywjiwd17f9q1a7yp8l8zz")))) (build-system cmake-build-system) (arguments `(#:configure-flags @@ -759,7 +838,7 @@ end-to-end encryption support; XML console.") (define-public gajim-omemo (package (name "gajim-omemo") - (version "2.7.4") + (version "2.7.7") (source (origin (method url-fetch/zipbomb) (uri (string-append @@ -767,7 +846,7 @@ end-to-end encryption support; XML console.") version ".zip")) (sha256 (base32 - "00zrj57n86c2m99n0swmmaws4f8zccbgbi8fknv6f9b1vif9jc8p")))) + "17jl4blkq04ag3g0har6z1bmk36523d29s51g260wb1pywfb536h")))) (build-system trivial-build-system) (arguments `(#:modules ((guix build utils)) @@ -1551,15 +1630,14 @@ protocol allows.") (define-public mcabber (package (name "mcabber") - (version "1.1.0") + (version "1.1.1") (source (origin (method url-fetch) (uri (string-append "https://mcabber.com/files/" name "-" version ".tar.bz2")) (sha256 - (base32 - "1ggh865p1rf10ffsnf4g6qv9i8bls36dxdb1nzs5r9vdqci2rz04")))) + (base32 "0ngrcc8nzpzk4vw36ni3w073149zsi0yjh922xy9cy5a7srwx2fp")))) (build-system gnu-build-system) (arguments '(#:configure-flags (list "--enable-otr" @@ -1696,43 +1774,49 @@ are both supported).") (package (name "profanity") (version "0.9.5") - (source (origin - (method url-fetch) - (uri (string-append "https://profanity-im.github.io/profanity-" - version ".tar.gz")) - (sha256 - (base32 - "00j9l9v62rz9hprgiy1vrz8v3v59ph18h8kskqxr31fgqvjv5xr3")))) - (build-system gnu-build-system) + (source + (origin + (method url-fetch) + (uri + (string-append "https://profanity-im.github.io/profanity-" + version ".tar.gz")) + (sha256 + (base32 + "00j9l9v62rz9hprgiy1vrz8v3v59ph18h8kskqxr31fgqvjv5xr3")))) + (build-system glib-or-gtk-build-system) (arguments - '(#:configure-flags - (list "--enable-c-plugins" - "--enable-otr" - "--enable-omemo" - "--enable-pgp" - "--enable-icons" - "--enable-notifications"))) + `(#:configure-flags + (list + "--enable-notifications" + "--enable-python-plugins" + "--enable-c-plugins" + "--enable-plugins" + "--enable-otr" + "--enable-pgp" + "--enable-omemo" + "--enable-icons-and-clipboard"))) + (native-inputs + `(("autoconf" ,autoconf) + ("autoconf-archive" ,autoconf-archive) + ("automake" ,automake) + ("cmocka" ,cmocka) + ("libtool" ,libtool) + ("pkg-config" ,pkg-config))) (inputs `(("curl" ,curl) ("expat" ,expat) ("glib" ,glib) ("gpgme" ,gpgme) + ("gtk+" ,gtk+-2) ("libmesode" ,libmesode) + ("libnotify" ,libnotify) ("libotr" ,libotr) + ("libsignal-protocol-c" ,libsignal-protocol-c) ("ncurses" ,ncurses) ("openssl" ,openssl) + ("python" ,python-wrapper) ("readline" ,readline) ("sqlite" ,sqlite))) - (native-inputs - `(("autoconf" ,autoconf) - ("autoconf-archive" ,autoconf-archive) - ("automake" ,automake) - ("cmocka" ,cmocka) - ("gtk+" ,gtk+-2) - ("libnotify" ,libnotify) - ("libtool" ,libtool) - ("libsignal-protocol-c" ,libsignal-protocol-c) - ("pkg-config" ,pkg-config))) (synopsis "Console-based XMPP client") (description "Profanity is a console based XMPP client written in C using ncurses and libmesode, inspired by Irssi.") @@ -2019,13 +2103,13 @@ QMatrixClient project.") (define-public hangups (package (name "hangups") - (version "0.4.10") + (version "0.4.11") (source (origin (method url-fetch) (uri (pypi-uri "hangups" version)) (sha256 - (base32 "0ww9z9kcb02pwnr8q1ll31wkzspc1fci1ly8ifrwzxysp4rxy3j5")))) + (base32 "165lravvlsgkv6pp3vgg785ihycvs43qzqxw2d2yygrc6pbhqlyv")))) (build-system python-build-system) (arguments `(#:phases @@ -2257,7 +2341,7 @@ support for high performance Telegram Bot creation.") ("folks" ,folks) ("libgcrypt" ,libgcrypt) ("libgee" ,libgee) - ("libhandy" ,libhandy) + ("libhandy" ,libhandy-0.0) ("pidgin" ,pidgin) ("purple-mm-sms" ,purple-mm-sms) ("sqlite" ,sqlite))) @@ -2270,4 +2354,33 @@ as well as on desktop platforms. It's based on libpurple and ModemManager.") (home-page "https://source.puri.sm/Librem5/chatty") (license license:gpl3+))) +(define-public mosquitto + (package + (name "mosquitto") + (version "1.6.12") + (source + (origin + (method url-fetch) + (uri (string-append "https://mosquitto.org/files/source/mosquitto-" + version ".tar.gz")) + (sha256 + (base32 + "1yq7y329baa1ly488rw125c3mvsnsa7kjkik602xv1xpkz8p73al")))) + (build-system cmake-build-system) + (inputs + `(("openssl" ,openssl))) + (synopsis "Message broker") + (description "This package provides Eclipse Mosquitto, a message broker +that implements the MQTT protocol versions 5.0, 3.1.1 and 3.1. Mosquitto +is lightweight and is suitable for use on all devices from low power single +board computers to full servers. + +The MQTT protocol provides a lightweight method of carrying out messaging +using a publish/subscribe model. This makes it suitable for Internet of +Things messaging such as with low power sensors or mobile devices such +as phones, embedded computers or microcontrollers.") + (home-page "https://mosquitto.org/") + ;; Dual licensed. + (license (list license:epl1.0 license:edl1.0)))) + ;;; messaging.scm ends here diff --git a/gnu/packages/monitoring.scm b/gnu/packages/monitoring.scm index 2ec59598bf..16de32b306 100644 --- a/gnu/packages/monitoring.scm +++ b/gnu/packages/monitoring.scm @@ -158,7 +158,7 @@ etc. via a Web interface. Features include: (define-public zabbix-agentd (package (name "zabbix-agentd") - (version "5.0.2") + (version "5.0.3") (source (origin (method url-fetch) @@ -166,7 +166,7 @@ etc. via a Web interface. Features include: "https://cdn.zabbix.com/zabbix/sources/stable/" (version-major+minor version) "/zabbix-" version ".tar.gz")) (sha256 - (base32 "1cnns7ixqi7ank3cbvcs7d8rb5zh9qiqbmgivazr83jnz81qg46w")))) + (base32 "1dc3fb9pa2cr6mfwgfyy1hpx26pbrws7989wj2kiiilmvimvrz1l")))) (build-system gnu-build-system) (arguments `(#:configure-flags diff --git a/gnu/packages/moreutils.scm b/gnu/packages/moreutils.scm index 12d93079c0..55a6d0b568 100644 --- a/gnu/packages/moreutils.scm +++ b/gnu/packages/moreutils.scm @@ -1,7 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2015 Taylan Ulrich Bayırlı/Kammer <taylanbayirli@gmail.com> ;;; Copyright © 2016, 2017, 2019 Efraim Flashner <efraim@flashner.co.il> -;;; Copyright © 2016, 2017, 2018 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2016, 2017, 2018, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -30,7 +30,7 @@ (define-public moreutils (package (name "moreutils") - (version "0.63") + (version "0.64") (source (origin (method url-fetch) @@ -42,8 +42,7 @@ "http://drabczyk.org/" name "-" version ".tar.gz"))) (sha256 - (base32 - "07c3wqf1sx3nhj4cs71a9ajcfl6arjjvvnhwqz7a0xm2m1b6vj2g")))) + (base32 "1v3hazb9i5y6b3vx4giiszvc2zk2pjjvq88xlk1maasw5ia07lpy")))) (build-system gnu-build-system) ;; For building the manual pages. (native-inputs diff --git a/gnu/packages/mp3.scm b/gnu/packages/mp3.scm index 92e3d5d5f8..fdc8ba801f 100644 --- a/gnu/packages/mp3.scm +++ b/gnu/packages/mp3.scm @@ -1,10 +1,10 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2013 Andreas Enge <andreas@enge.fr> -;;; Copyright © 2014, 2015, 2017 Ludovic Courtès <ludo@gnu.org> +;;; Copyright © 2014, 2015, 2017, 2020 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2015 Mark H Weaver <mhw@netris.org> ;;; Copyright © 2016 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2017 Thomas Danckaert <post@thomasdanckaert.be> -;;; Copyright © 2017, 2019 Pierre Langlois <pierre.langlois@gmx.com> +;;; Copyright © 2017, 2019, 2020 Pierre Langlois <pierre.langlois@gmx.com> ;;; Copyright © 2018, 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2019 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2020 Michael Rohleder <mike@rohleder.de> @@ -50,6 +50,7 @@ #:use-module (gnu packages video) ;ffmpeg #:use-module (guix packages) #:use-module (guix download) + #:use-module (guix git-download) #:use-module (guix utils) #:use-module (guix build-system gnu) #:use-module (guix build-system python) @@ -160,18 +161,31 @@ a highly stable and efficient implementation.") (define-public taglib (package (name "taglib") - (version "1.11.1") + (version "1.12-beta-1") (source (origin - (method url-fetch) - (uri (string-append "http://taglib.github.io/releases/taglib-" - version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/taglib/taglib") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "0ssjcdjv4qf9liph5ry1kngam1y7zp8fzr9xv4wzzrma22kabldn")))) + "1mp6w2ikniw8w6d5wr0h20j0ijg8jw7s9dli5a8k9znpznvxpym4")))) (build-system cmake-build-system) (arguments '(#:tests? #f ; Tests are not ran with BUILD_SHARED_LIBS on. - #:configure-flags (list "-DBUILD_SHARED_LIBS=ON"))) + #:configure-flags (list "-DBUILD_SHARED_LIBS=ON") + #:phases (modify-phases %standard-phases + (add-before 'configure 'adjust-zlib-ldflags + (lambda* (#:key inputs #:allow-other-keys) + ;; Make sure users of 'taglib-config --libs' get the -L + ;; flag for zlib. + (substitute* "CMakeLists.txt" + (("set\\(ZLIB_LIBRARIES_FLAGS -lz\\)") + (string-append "set(ZLIB_LIBRARIES_FLAGS \"-L" + (assoc-ref inputs "zlib") + "/lib -lz\")"))) + #t))))) (inputs `(("zlib" ,zlib))) (home-page "https://taglib.org") (synopsis "Library to access audio file meta-data") diff --git a/gnu/packages/mpd.scm b/gnu/packages/mpd.scm index 8c82f30d85..032b1d1074 100644 --- a/gnu/packages/mpd.scm +++ b/gnu/packages/mpd.scm @@ -183,7 +183,7 @@ player daemon.") (define-public ncmpc (package (name "ncmpc") - (version "0.38") + (version "0.39") (source (origin (method url-fetch) (uri @@ -192,7 +192,7 @@ player daemon.") "/ncmpc-" version ".tar.xz")) (sha256 (base32 - "18i73q33xq89abrxjd3hhl05gjniv6ms76ndjlc168ydm8wamh9b")))) + "1a0i1wm9287kd4nqii28dp84260063kyl726yjzxzr7vq8hf7sv4")))) (build-system meson-build-system) (arguments `(#:configure-flags diff --git a/gnu/packages/music.scm b/gnu/packages/music.scm index ae8579cb47..a3e38dd1c8 100644 --- a/gnu/packages/music.scm +++ b/gnu/packages/music.scm @@ -73,11 +73,13 @@ #:use-module (gnu packages bash) #:use-module (gnu packages bison) #:use-module (gnu packages boost) + #:use-module (gnu packages build-tools) #:use-module (gnu packages cdrom) #:use-module (gnu packages code) #:use-module (gnu packages check) #:use-module (gnu packages cmake) #:use-module (gnu packages compression) + #:use-module (gnu packages cpp) #:use-module (gnu packages crypto) #:use-module (gnu packages curl) #:use-module (gnu packages cyrus-sasl) @@ -504,7 +506,7 @@ settings (aliasing, linear interpolation and cubic interpolation).") (define-public hydrogen (package (name "hydrogen") - (version "1.0.0") + (version "1.0.1") (source (origin (method git-fetch) @@ -513,7 +515,7 @@ settings (aliasing, linear interpolation and cubic interpolation).") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "1kwlqfah0yk135i0rzmbbgnqdzxrzg9yslii5asl4ip9x4dc1w3r")))) + (base32 "0snljpvbcgikhz610c325dgvayi0k512p3bglck9vvi90wsqx7l1")))) (build-system cmake-build-system) (arguments `(#:test-target "tests" @@ -1231,7 +1233,7 @@ device supports.") (define-public bsequencer (package (name "bsequencer") - (version "1.2.0") + (version "1.6.0") (source (origin (method git-fetch) (uri (git-reference @@ -1240,7 +1242,7 @@ device supports.") (file-name (git-file-name name version)) (sha256 (base32 - "08xwz5v8wrar0rx7qdr9pkpjz2k9sw6bn5glhpn6sp6453fabf8q")))) + "0w21kzq695xy4i1r6xvvh7sad5m0rlmdgc7ykmrlzfsm1252dz80")))) (build-system gnu-build-system) (arguments `(#:make-flags @@ -1266,17 +1268,17 @@ with a selectable pattern matrix size.") (package (inherit bsequencer) (name "bchoppr") - (version "1.4.2") + (version "1.8.0") (source - (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/sjaehn/BChoppr") - (commit version))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "1ympx0kyn3mkb23xgd44rlrf4qnngnlkmikz9syhayklgax7ijgm")))) + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/sjaehn/BChoppr") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1nd6byy75f0rbz9dm9drhxmpsfhxhg0y7q3v2m3098llynhy9k2j")))) (synopsis "Audio stream-chopping LV2 plugin") (description "B.Choppr cuts the audio input stream into a repeated sequence of up to 16 chops. Each chop can be leveled up or down (gating). @@ -1307,17 +1309,17 @@ B.Choppr is the successor of B.Slizr.") (package (inherit bsequencer) (name "bjumblr") - (version "0.2") + (version "1.4.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/sjaehn/BJumblr") - (commit (string-append "v" version)))) + (commit version))) (file-name (git-file-name name version)) (sha256 (base32 - "14z8113zkwykbhm1a8h2xs972dgifvlfij92b08jckyc7cbz84ys")))) + "0kl6hrxmqrdf0195bfnzsa2h1073fgiqrfhg2276fm1954sm994v")))) (inputs `(("cairo", cairo) ("libsndfile", libsndfile) @@ -1328,6 +1330,47 @@ re-sequencer LV2 plugin.") (home-page "https://github.com/sjaehn/BJumblr") (license license:gpl3+))) +(define-public bschaffl + (package + (inherit bsequencer) + (name "bschaffl") + (version "1.2.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/sjaehn/BSchaffl") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1c09acqrbd387ba41f8ch1qykdap5h6cg9if5pgd16i4dmjnpghj")))) + (inputs + `(("cairo", cairo) + ("fontconfig" ,fontconfig) + ("libsndfile", libsndfile) + ("libx11" ,libx11) + ("lv2", lv2))) + (home-page "https://github.com/sjaehn/BSchaffl") + (synopsis "Pattern-controlled MIDI amp & time stretch LV2 plugin") + (description "This package provides an LV2 plugin that allows for +pattern-controlled MIDI amp & time stretching to produce shuffle / swing +effects. + +Key features include: + +@enumerate +@item MIDI velocity amplification and timing manipulation plugin +@item Swing and shuffle rhythms +@item Pre-generator dynamics +@item Tempo rubato +@item Pattern (sliders) or shape-controlled +@item MIDI filters +@item Smart quantization +@end itemize +") + (license license:gpl3+))) + (define-public solfege (package (name "solfege") @@ -1410,46 +1453,42 @@ your own lessons.") (license license:gpl3+))) (define-public powertabeditor - ;; This commit is after the switch from catch2 to doctest; I couldn't build - ;; powertabeditor with catch2. - (let ((commit "c5d39b25b75bf87ec693a3ac5018823b1d87f277") - (revision "1")) - (package - (name "powertabeditor") - (version (git-version "2.0.0-alpha12" revision commit)) - (source (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/powertab/powertabeditor") - (commit commit))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "16qhqfvk14bp7s8cwr8ds8zfd80pq603d7aymr7967pnb49kic5z")))) - (build-system cmake-build-system) - (arguments - `(#:phases - (modify-phases %standard-phases - (replace 'check (lambda _ (invoke "bin/pte_tests")))))) - (inputs - `(("alsa-lib" ,alsa-lib) - ("boost" ,boost) - ("minizip" ,minizip) - ("pugixml" ,pugixml) - ("qtbase" ,qtbase) - ("rapidjson" ,rapidjson) - ("rtmidi" ,rtmidi) - ("timidity" ,timidity++) - ("zlib" ,zlib))) - (native-inputs - `(("doctest" ,doctest) - ("pkg-config" ,pkg-config))) - (home-page "https://github.com/powertab/powertabedito") - (synopsis "Guitar tablature editor") - (description - "Power Tab Editor 2.0 is the successor to the famous original Power Tab + (package + (name "powertabeditor") + (version "2.0.0-alpha13") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/powertab/powertabeditor") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "12il5xzgg53ick5k4ivvvqdagld5pgigiiz6s829kkdaymqr7vx5")))) + (build-system cmake-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check (lambda _ (invoke "bin/pte_tests")))))) + (inputs + `(("alsa-lib" ,alsa-lib) + ("boost" ,boost) + ("minizip" ,minizip) + ("pugixml" ,pugixml) + ("qtbase" ,qtbase) + ("rapidjson" ,rapidjson) + ("rtmidi" ,rtmidi) + ("timidity" ,timidity++) + ("zlib" ,zlib))) + (native-inputs + `(("doctest" ,doctest) + ("pkg-config" ,pkg-config))) + (home-page "https://github.com/powertab/powertabedito") + (synopsis "Guitar tablature editor") + (description + "Power Tab Editor 2.0 is the successor to the famous original Power Tab Editor. It is compatible with Power Tab Editor 1.7 and Guitar Pro.") - (license license:gpl3+)))) + (license license:gpl3+))) (define-public jalv-select (package @@ -1501,7 +1540,7 @@ users to select LV2 plugins and run them with jalv.") (define-public synthv1 (package (name "synthv1") - (version "0.9.16") + (version "0.9.17") (source (origin (method url-fetch) (uri @@ -1509,7 +1548,7 @@ users to select LV2 plugins and run them with jalv.") "/synthv1-" version ".tar.gz")) (sha256 (base32 - "1k5sm6s2d5di5yk0bxwy3nizq9m1ym46b4qz2m45nm3zspkbzybp")))) + "0jc2drk5dzsaa6vxmk1hyi0zp02zm3mzar3arssfy5vcyc5ig6sk")))) (build-system gnu-build-system) (arguments `(#:tests? #f)) ; there are no tests @@ -1533,7 +1572,7 @@ oscillators and stereo effects.") (define-public drumkv1 (package (name "drumkv1") - (version "0.9.16") + (version "0.9.17") (source (origin (method url-fetch) (uri @@ -1541,7 +1580,7 @@ oscillators and stereo effects.") "/drumkv1-" version ".tar.gz")) (sha256 (base32 - "1r55575w9r0ifysw9mgxjvv0fszvx8ykjgim3zczf3mb5s9ngavv")))) + "198fyc5dwjn679si86vy139ngym4n3mdy1z4vfjikn7b6mriq1x2")))) (build-system gnu-build-system) (arguments `(#:tests? #f)) ; there are no tests @@ -1566,7 +1605,7 @@ effects.") (define-public samplv1 (package (name "samplv1") - (version "0.9.16") + (version "0.9.17") (source (origin (method url-fetch) (uri @@ -1574,7 +1613,7 @@ effects.") "/samplv1-" version ".tar.gz")) (sha256 (base32 - "0k5vpjd4wv7h0s3f7gg07a2ksw0b010yvkwmadzzvv2qfb928grm")))) + "1v21r722m027jjy4x6lm5cvzapsnpx36r10ar543ay0hgmygl322")))) (build-system gnu-build-system) (arguments `(#:tests? #f)) ; there are no tests @@ -1599,7 +1638,7 @@ effects.") (define-public padthv1 (package (name "padthv1") - (version "0.9.16") + (version "0.9.17") (source (origin (method url-fetch) (uri @@ -1607,7 +1646,7 @@ effects.") "/padthv1-" version ".tar.gz")) (sha256 (base32 - "1f2v60dpja0rnml60g463fjiz0f84v32yjwpvr56z79h1i6fssmv")))) + "098fk8fwcgssnfr1gilqg8g17zvch62lrn3rqsswpzbr3an5adb3")))) (build-system gnu-build-system) (arguments `(#:tests? #f)) ; there are no tests @@ -1617,7 +1656,7 @@ effects.") ("alsa-lib" ,alsa-lib) ("non-session-manager" ,non-session-manager) ("liblo" ,liblo) - ("fftw" ,fftw) + ("fftwf" ,fftwf) ("qtbase" ,qtbase))) (native-inputs `(("pkg-config" ,pkg-config) @@ -1945,7 +1984,7 @@ export.") (define-public pd (package (name "pd") - (version "0.51-0") + (version "0.51-1") (source (origin (method url-fetch) (uri @@ -1953,7 +1992,7 @@ export.") version ".src.tar.gz")) (sha256 (base32 - "0qzv4hjf4h7xx00ihnbl43pxa0fia9qkc8nwgzhqrs12jiljz6ps")))) + "0imbha9h96vqa967cbmdj7kkx7zrs054n5w2bjnifxdzws3qbxf6")))) (build-system gnu-build-system) (arguments (let ((wish (string-append "wish" (version-major+minor @@ -2304,66 +2343,61 @@ capabilities, custom envelopes, effects, etc.") (license license:gpl2))) (define-public yoshimi - ;; Release 1.7.1 doesn't build with our version of LV2. Applying only - ;; 86996cbb235f0fe138ae814a6758c2c8ba1c2a38 is not enough. - (let ((commit "bfcadc6537dbcb301cd93346f21d36bcbffa36c7") - (revision "0")) - (package - (name "yoshimi") - (version (git-version "1.7.1" revision commit)) - (source - (origin - (method git-fetch) - (uri (git-reference - (url "https://git.code.sf.net/p/yoshimi/code") - (commit commit))) - (sha256 - (base32 "0vhdxj7ky4iyq11r5wj9jwavjih4xvcn2djbrlmwpkdhrzpy6myl")) - (file-name (git-file-name name version)))) - (build-system cmake-build-system) - (arguments - `(#:tests? #f ; there are no tests - #:configure-flags - (list (string-append "-DCMAKE_INSTALL_DATAROOTDIR=" - (assoc-ref %outputs "out") "/share")) - #:phases - (modify-phases %standard-phases - (add-before 'configure 'enter-dir - (lambda _ (chdir "src") #t)) - ;; Move SSE compiler optimization flags from generic target to - ;; athlon64 and core2 targets, because otherwise the build would fail - ;; on non-Intel machines. - (add-after 'unpack 'remove-sse-flags-from-generic-target - (lambda _ - (substitute* "src/CMakeLists.txt" - (("-msse -msse2 -mfpmath=sse") "") - (("-march=(athlon64|core2)" flag) - (string-append flag " -msse -msse2 -mfpmath=sse"))) - #t))))) - (inputs - `(("boost" ,boost) - ("fftwf" ,fftwf) - ("alsa-lib" ,alsa-lib) - ("jack" ,jack-1) - ("fontconfig" ,fontconfig) - ("minixml" ,minixml) - ("mesa" ,mesa) - ("fltk" ,fltk) - ("lv2" ,lv2) - ("readline" ,readline) - ("ncurses" ,ncurses) - ("cairo" ,cairo) - ("zlib" ,zlib))) - (native-inputs - `(("pkg-config" ,pkg-config))) - (home-page "http://yoshimi.sourceforge.net/") - (synopsis "Multi-paradigm software synthesizer") - (description - "Yoshimi is a fork of ZynAddSubFX, a feature-heavy real-time software + (package + (name "yoshimi") + (version "1.7.2") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://sourceforge/yoshimi/" + (version-major+minor version) + "/yoshimi-" version ".tar.bz2")) + (sha256 + (base32 "1vxrksg199pcgiykq0nsf67ihfk2ny2jmpf6gzdb3nk9iphm7di3")))) + (build-system cmake-build-system) + (arguments + `(#:tests? #f ; there are no tests + #:configure-flags + (list (string-append "-DCMAKE_INSTALL_DATAROOTDIR=" + (assoc-ref %outputs "out") "/share")) + #:phases + (modify-phases %standard-phases + (add-before 'configure 'enter-dir + (lambda _ (chdir "src") #t)) + ;; Move SSE compiler optimization flags from generic target to + ;; athlon64 and core2 targets, because otherwise the build would fail + ;; on non-Intel machines. + (add-after 'unpack 'remove-sse-flags-from-generic-target + (lambda _ + (substitute* "src/CMakeLists.txt" + (("-msse -msse2 -mfpmath=sse") "") + (("-march=(athlon64|core2)" flag) + (string-append flag " -msse -msse2 -mfpmath=sse"))) + #t))))) + (inputs + `(("boost" ,boost) + ("fftwf" ,fftwf) + ("alsa-lib" ,alsa-lib) + ("jack" ,jack-1) + ("fontconfig" ,fontconfig) + ("minixml" ,minixml) + ("mesa" ,mesa) + ("fltk" ,fltk) + ("lv2" ,lv2) + ("readline" ,readline) + ("ncurses" ,ncurses) + ("cairo" ,cairo) + ("zlib" ,zlib))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (home-page "http://yoshimi.sourceforge.net/") + (synopsis "Multi-paradigm software synthesizer") + (description + "Yoshimi is a fork of ZynAddSubFX, a feature-heavy real-time software synthesizer. It offers three synthesizer engines, multitimbral and polyphonic synths, microtonal capabilities, custom envelopes, effects, etc. Yoshimi improves on support for JACK features, such as JACK MIDI.") - (license license:gpl2)))) + (license license:gpl2))) (define-public libgig (package @@ -3226,15 +3260,14 @@ with a number of bugfixes and changes to improve IT playback.") (define-public sooperlooper (package (name "sooperlooper") - (version "1.7.3") - (source (origin - (method url-fetch) - (uri (string-append "http://essej.net/sooperlooper/sooperlooper-" - version ".tar.gz")) - (sha256 - (base32 - "0n2gdxw1fx8nxxnpzf4sj0kp6k6zi1yq59cbz6qqzcnsnpnvszbs")) - (patches (search-patches "sooperlooper-build-with-wx-30.patch")))) + (version "1.7.4") + (source + (origin + (method url-fetch) + (uri (string-append "http://essej.net/sooperlooper/sooperlooper-" + version ".tar.gz")) + (sha256 + (base32 "1jjvq4aflbyr3nr8b318k1vkad16xfa1jkqn9ckzw4419qc6c1k5")))) (build-system gnu-build-system) (arguments `(#:phases @@ -4127,7 +4160,7 @@ sample library.") (define-public muse-sequencer (package (name "muse-sequencer") - (version "3.0.0") + (version "3.1.1") (source (origin (method git-fetch) (uri (git-reference @@ -4139,19 +4172,30 @@ sample library.") (file-name (git-file-name name version)) (sha256 (base32 - "1nninz8qyqlxxjdnrm79y3gr3056pga9l2fsqh674jd3cjvafya3")))) + "1rasp2v1ds2aw296lbf27rzw0l9fjl0cvbvw85d5ycvh6wkm301p")))) (build-system cmake-build-system) (arguments `(#:tests? #f ; there is no test target #:configure-flags - (list "-DENABLE_LV2_SUPPLIED=OFF" - "-DENABLE_RTAUDIO=OFF" ; FIXME: not packaged - "-DENABLE_INSTPATCH=OFF" ; FIXME: not packaged - "-DENABLE_VST_NATIVE=OFF") + (list "-DENABLE_INSTPATCH=OFF" ; FIXME: not packaged + "-DENABLE_VST_NATIVE=OFF" + (string-append "-DCMAKE_EXE_LINKER_FLAGS=" + "-Wl,-rpath=" + (assoc-ref %outputs "out") "/lib/muse-" + ,(version-major+minor version) "/modules") + (string-append "-DCMAKE_SHARED_LINKER_FLAGS=" + "-Wl,-rpath=" + (assoc-ref %outputs "out") "/lib/muse-" + ,(version-major+minor version) "/modules")) #:phases (modify-phases %standard-phases (add-after 'unpack 'chdir - (lambda _ (chdir "muse3")))))) + (lambda _ (chdir "muse3") #t)) + (add-after 'chdir 'fix-include + (lambda _ + (substitute* "muse/driver/rtaudio.h" + (("rtaudio/RtAudio.h") "RtAudio.h")) + #t))))) (inputs `(("alsa-lib" ,alsa-lib) ("lash" ,lash) @@ -4164,10 +4208,14 @@ sample library.") ("sord" ,sord) ("libsndfile" ,libsndfile) ("libsamplerate" ,libsamplerate) + ("lrdf" ,lrdf) ("fluidsynth" ,fluidsynth) ("pcre" ,pcre) + ("pulseaudio" ,pulseaudio) ; required by rtaudio ("qtbase" ,qtbase) - ("qtsvg" ,qtsvg))) + ("qtsvg" ,qtsvg) + ("rtaudio" ,rtaudio) + ("rubberband" ,rubberband))) (native-inputs `(("pkg-config" ,pkg-config) ("qttools" ,qttools))) @@ -4999,7 +5047,7 @@ applications.") (define-public sherlock-lv2 (package (name "sherlock-lv2") - (version "0.20.0") + (version "0.24.0") (source (origin (method url-fetch) @@ -5009,10 +5057,11 @@ applications.") version ".tar.xz")) (sha256 (base32 - "1c5xajpss9h8lbyx160bbzg8va50n2d74qwnxig9sf468rzmha1y")))) + "08gjfx7vrsx9zvj04j8cr3vscxmq6jr2hbdi6dfgp1l1dnnpxsgq")))) (build-system meson-build-system) (inputs - `(("libx11" ,libx11) + `(("glu" ,glu) + ("libx11" ,libx11) ("mesa" ,mesa) ("sratom" ,sratom))) (native-inputs @@ -5025,6 +5074,49 @@ and debugging of event signal flows inside plugin graphs.") (home-page "https://open-music-kontrollers.ch/lv2/sherlock/") (license license:artistic2.0))) +(define-public foo-yc20 + (package + (name "foo-yc20") + (version "1.3.0") + (source + (origin + (method url-fetch) + (uri (string-append "https://github.com/sampov2/foo-yc20/releases/download/" + version "/foo-yc20-" version ".tar.bz2")) + (sha256 + (base32 + "1drzfyr7mzb58pdv0gsqkg6ds6kbgp6g25rrv1yya1611cljgvjh")))) + (build-system gnu-build-system) + (arguments + `(#:make-flags + (list (string-append "PREFIX=" (assoc-ref %outputs "out"))) + #:tests? #f ; no automated test + #:phases + (modify-phases %standard-phases + (replace 'configure + (lambda _ + (substitute* "Makefile" + (("-mtune=native") "") + (("-march=native") "")) + #t))))) + (inputs + `(("jack" ,jack-1) + ("lv2" ,lv2) + ("cairo" ,cairo) + ("gtk" ,gtk+-2))) + (native-inputs + `(("faust" ,faust) + ("pkg-config" ,pkg-config))) + (home-page "https://foo-yc20.codeforcode.com/") + (synopsis "Implementation of Yamaha YC-20 combo organ from 1969") + (description "This is a Faust implementation of a 1969 designed Yamaha +combo organ, the YC-20. This package provides an LV2 plugin and a standalone +version. Processing for the organ is based on original schematics and +measurements from a working specimen. This instrument simulates the circutry +as a whole to realisticly reproduce the features and flaws of the real deal.") + ;; Note that after 1.3.0 the license was changed. + (license license:gpl3+))) + (define-public spectacle-analyzer (package (name "spectacle-analyzer") @@ -5071,15 +5163,15 @@ short-time Fourier transform, available as LV2 audio plugin and JACK client.") (define-public x42-plugins (package (name "x42-plugins") - (version "20191215") + (version "20200714") (source (origin (method url-fetch) (uri - (string-append "http://gareus.org/misc/x42-plugins/x42-plugins-" + (string-append "https://gareus.org/misc/x42-plugins/x42-plugins-" version ".tar.xz")) (sha256 - (base32 "1mwfvhsvc0qgjyiwd8pmmam1mav43lmv39fljhmj9yri558v5g1c")))) + (base32 "1av05ykph8x67018hm9zfgh1vk0zi39mvrsxkj6bm4hkarxf0vvl")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no "check" target @@ -5175,7 +5267,7 @@ ZaMultiComp, ZaMultiCompX2 and ZamSynth.") (define-public geonkick (package (name "geonkick") - (version "1.10.0") + (version "2.3.7") (source (origin (method git-fetch) @@ -5185,7 +5277,7 @@ ZaMultiComp, ZaMultiCompX2 and ZamSynth.") (file-name (git-file-name name version)) (sha256 (base32 - "1a59wnm4035kjhs66hihlkiv45p3ffb2yaj1awvyyi5f0lds5zvh")))) + "1wdcbwiyy6i5agq5lffkyilyc8mv1cc4mp9h0nybn240vb2flqc2")))) (build-system cmake-build-system) (arguments `(#:tests? #f ;no tests included @@ -5204,6 +5296,8 @@ ZaMultiComp, ZaMultiCompX2 and ZamSynth.") ("rapidjson" ,rapidjson))) (native-inputs `(("lv2" ,lv2) + ;; Fails with default gcc (#include <filesystem> not found). + ("gcc" ,gcc-9) ("pkg-config" ,pkg-config) ("sord" ,sord))) (synopsis "Percussion synthesizer") @@ -5365,8 +5459,13 @@ and as an LV2 plugin.") (define-public zrythm (package + ;; Zrythm contains trademarks and comes with a trademark policy found in + ;; TRADMARKS.md inside the release distribution. The trademark policy + ;; allows verbatim re-distribution, and it also allows FSF-approved + ;; distros to make necessary changes to integrate the software into the + ;; distribution. (name "zrythm") - (version "0.8.333") + (version "0.8.911") (source (origin (method url-fetch) @@ -5374,13 +5473,19 @@ and as an LV2 plugin.") version ".tar.xz")) (sha256 (base32 - "0x2kxr5zz058jpy6k6ymj0fi2gqfcgrlv4qkwz9443hjy5345iwb")))) + "1xyp70sjc2k5pfdqbwqa988v86da0rmmyl8ry86bqv4ja80sc6g9")))) (build-system meson-build-system) (arguments `(#:glib-or-gtk? #t + #:meson ,meson-0.55 #:configure-flags - `("-Denable_tests=true" "-Dmanpage=true" - "-Dinstall_dseg_font=false" "-Denable_ffmpeg=true") + `("-Dtests=true" + "-Dmanpage=true" + "-Ddseg_font=false" + "-Dgraphviz=enabled" ; for exporting routing graphs + "-Dguile=enabled" ; for Guile scripting + "-Djack=enabled" ; for JACK audio/MIDI backend + "-Dsdl=enabled") ; for SDL audio backend (which uses ALSA) #:phases (modify-phases %standard-phases (add-after 'unpack 'patch-xdg-open @@ -5393,7 +5498,6 @@ and as an LV2 plugin.") `(("alsa-lib" ,alsa-lib) ("jack" ,jack-1) ("font-dseg" ,font-dseg) - ("ffmpeg" ,ffmpeg) ("fftw" ,fftw) ("fftwf" ,fftwf) ("gettext" ,gettext-minimal) @@ -5402,19 +5506,23 @@ and as an LV2 plugin.") ("gtk+" ,gtk+) ("gtksourceview" ,gtksourceview) ("guile" ,guile-2.2) + ("libaudec" ,libaudec) ("libcyaml" ,libcyaml) ("libsamplerate" ,libsamplerate) ("libsndfile" ,libsndfile) ("libyaml" ,libyaml) ("lilv" ,lilv) + ("lv2" ,lv2) + ("reproc" ,reproc) + ("rubberband" ,rubberband) + ("rtmidi" ,rtmidi) + ("sdl2" ,sdl2) ("xdg-utils" ,xdg-utils) - ("rubberband" ,rubberband))) + ("zstd" ,zstd "lib"))) (native-inputs `(("pkg-config" ,pkg-config) ("help2man" ,help2man) - ("libaudec" ,libaudec) - ("lv2" ,lv2) - ("glib" ,glib "bin"))) ;for 'glib-compile-resources' + ("glib" ,glib "bin"))) ; for 'glib-compile-resources' (synopsis "Digital audio workstation focusing on usability") (description "Zrythm is a digital audio workstation designed to be featureful and easy to use. It offers unlimited automation options, LV2 @@ -5425,7 +5533,7 @@ plugin support, JACK support and chord assistance.") (define-public dragonfly-reverb (package (name "dragonfly-reverb") - (version "3.0.0") + (version "3.2.1") (source (origin (method git-fetch) @@ -5437,7 +5545,7 @@ plugin support, JACK support and chord assistance.") (recursive? #t))) (file-name (git-file-name name version)) (sha256 - (base32 "1z2x33lzpd26dv1p29ca7vy8mjfzkfpin35iq46spwd9k3sqn1ja")))) + (base32 "0vfm2510shah67k87mdyar4wr4vqwii59y9lqfhwm6blxparkrqa")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no check target diff --git a/gnu/packages/networking.scm b/gnu/packages/networking.scm index 85c43efd50..1c2e7cf979 100644 --- a/gnu/packages/networking.scm +++ b/gnu/packages/networking.scm @@ -259,23 +259,35 @@ GLib-based library, libnice, as well as GStreamer elements to use it.") (define-public rtmpdump (package (name "rtmpdump") - (version "2.3") + (version "2.4") (source (origin - (method url-fetch) - (uri - (string-append "https://rtmpdump.mplayerhq.hu/download/" - name "-" version ".tgz")) + (method git-fetch) + (uri (git-reference + (url "https://git.ffmpeg.org/rtmpdump") + (commit "c28f1bab7822de97353849e7787b59e50bbb1428"))) + (file-name (git-file-name name version)) (sha256 - (base32 "0b2b49a57kpz9gi8dx1x3cs8b0gjx8x0c89x0q96kkl2knlvff7g")))) + (base32 "1n3kdip83nvvs4sin30zpcdr5q711mqhq2lxrv5vgbc6lskpwzlj")))) (build-system gnu-build-system) (arguments - `(#:tests? #f ; No tests + `(#:tests? #f ; no tests #:make-flags (list + ;; The ‘validate-runpath’ phase fails to find librtmp.so.0. + (string-append "LDFLAGS=-Wl,-rpath=" + (assoc-ref %outputs "out") "/lib") (string-append "prefix=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases + (add-after 'unpack 'omit-static-library + (lambda _ + (substitute* "librtmp/Makefile" + (("cp librtmp\\.a .*") ; don't install it + "") + (("librtmp\\.a ") ; don't build it + "")) + #t)) (delete 'configure)))) (inputs `(("openssl" ,openssl-1.0) @@ -367,6 +379,28 @@ sockets, and also some helper utilities around SCTP.") ;; Others. license:gpl2+)))) +(define-public knockd + (package + (name "knockd") + (version "0.7") + (source (origin + (method url-fetch) + (uri (string-append "https://www.zeroflux.org/proj/knock/files/knock-" + version ".tar.gz")) + (sha256 + (base32 + "193qcpsy7v51c6awhg9652l5blyz8vp6n7y6fi7l4rhh6af4ff4r")))) + (build-system gnu-build-system) + (inputs + `(("libpcap" ,libpcap))) + (home-page "https://www.zeroflux.org/projects/knock") + (synopsis "Small port-knock daemon") + (description "@command{knockd} is a port-knock daemon. It listens to all traffic on +an ethernet or PPP interface, looking for special \"knock\" sequences of @dfn{port-hits} +(UDP/TCP packets sent to a server port). This port need not be open, since knockd listens +at the link-layer level.") + (license license:gpl2+))) + (define-public nng (package (name "nng") @@ -1495,14 +1529,14 @@ TCP connection, TLS handshake and so on) in the terminal.") (define-public squid (package (name "squid") - (version "4.12") + (version "4.13") (source (origin (method url-fetch) (uri (string-append "http://www.squid-cache.org/Versions/v4/squid-" version ".tar.xz")) (sha256 - (base32 "05z34ysy2zn7as11vd365xxhh36bm1ysiwcbr0i0f0nwng406apl")))) + (base32 "1q1ywpic6s7dfjj3cwzcfgscc4zq0aih462gyas7j1z683ss14b8")))) (build-system gnu-build-system) (arguments '(#:phases @@ -2073,14 +2107,14 @@ HTTP proxies.") (define-public enet (package (name "enet") - (version "1.3.15") - (source (origin - (method url-fetch) - (uri (string-append "http://enet.bespin.org/download/" - "enet-" version ".tar.gz")) - (sha256 - (base32 - "1yxxf9bkx6dx3j8j70fj17c05likyfibb1419ls74hp58qrzdgas")))) + (version "1.3.16") + (source + (origin + (method url-fetch) + (uri (string-append "http://enet.bespin.org/download/" + "enet-" version ".tar.gz")) + (sha256 + (base32 "1lggc82rbzscci057dqqyhkbq4j6mr5k01hbrvn06jkzc2xpxdxv")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) @@ -3394,14 +3428,14 @@ maximum extent possible.") (define-public batctl (package (name "batctl") - (version "2020.1") + (version "2020.3") (source (origin (method url-fetch) (uri (string-append "https://downloads.open-mesh.org/batman/releases/batman-adv-" version "/batctl-" version ".tar.gz")) (sha256 - (base32 "0fy252q1my3a57v6pfz8i97h6zv7v03di01dhwjkj47pqnx1rqm3")))) + (base32 "0r2w2v4sy6wgr7mp9lc7yj9k4ldsbsm3425rjil7p0b17zmzf4rm")))) (inputs `(("libnl" ,libnl))) (native-inputs @@ -3427,7 +3461,7 @@ module @code{batman-adv}, for Layer 2.") (define-public pagekite (package (name "pagekite") - (version "1.5.2.200603") + (version "1.5.2.200725") (source (origin (method git-fetch) @@ -3436,7 +3470,7 @@ module @code{batman-adv}, for Layer 2.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "08rcyr54dssnpand6y26f8x9cjmd91hr44my08kxw70s5iqiwizv")))) + (base32 "0lig1i42bn9isw848vnml5qhcaa04x1dr2hb075bm0a3439kv3rr")))) (build-system python-build-system) (arguments `(#:phases @@ -3639,15 +3673,14 @@ thousands of connections is clearly realistic with today's hardware.") (define-public lldpd (package (name "lldpd") - (version "1.0.5") + (version "1.0.6") (source (origin (method url-fetch) (uri (string-append "https://media.luffy.cx/files/lldpd/lldpd-" version ".tar.gz")) (sha256 - (base32 - "16fbqrs3l976gdslx647nds8x7sz4h5h3h4l4yxzrayvyh9b5lrd")) + (base32 "1v5fd8vwxracvzvgrsswvhppwyx5c4srj89g1cnvy73w831mpq95")) (modules '((guix build utils))) (snippet '(begin @@ -3728,3 +3761,28 @@ hashcash stamps efficiently. This package contains a command-line tool for computing and verifying hashcash stamps.") (license license:public-domain))) + +(define-public nbd + (package + (name "nbd") + (version "3.20") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://sourceforge/nbd/nbd/3.20/nbd-" version + ".tar.xz")) + (sha256 + (base32 + "1kfnyx52nna2mnw264njk1dl2zc8m78sz031yp65mbmpi99v7qg0")))) + (build-system gnu-build-system) + (inputs + `(("glib" ,glib))) + (native-inputs + `(("pkg-config" ,pkg-config) + ("which" ,which))) + (home-page "https://nbd.sourceforge.io/") + (synopsis "NBD client and server") + (description "This package provides the NBD (Network Block Devices) +client and server. It allows you to use remote block devices over a TCP/IP +network.") + (license license:gpl2))) diff --git a/gnu/packages/node.scm b/gnu/packages/node.scm index 1adb2cd07f..f0b989b88a 100644 --- a/gnu/packages/node.scm +++ b/gnu/packages/node.scm @@ -6,6 +6,7 @@ ;;; Copyright © 2017 Mike Gerwitz <mtg@gnu.org> ;;; Copyright © 2018 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2018, 2019, 2020 Marius Bakke <mbakke@fastmail.com> +;;; Copyright © 2020 Pierre Langlois <pierre.langlois@gmx.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -24,6 +25,7 @@ (define-module (gnu packages node) #:use-module ((guix licenses) #:select (expat)) + #:use-module ((guix build utils) #:select (alist-replace)) #:use-module (guix packages) #:use-module (guix derivations) #:use-module (guix download) @@ -46,14 +48,14 @@ (define-public node (package (name "node") - (version "10.19.0") + (version "10.20.0") (source (origin (method url-fetch) (uri (string-append "https://nodejs.org/dist/v" version "/node-v" version ".tar.xz")) (sha256 (base32 - "0sginvcsf7lrlzsnpahj4bj1f673wfvby8kaxgvzlrbb7sy229v2")) + "0cvjwnl0wkcsyw3kannbdv01s235wrnp11n2s6swzjx95gpichfi")) (modules '((guix build utils))) (snippet `(begin @@ -199,6 +201,24 @@ devices.") (properties '((max-silent-time . 7200) ;2h, needed on ARM (timeout . 21600))))) ;6h +;; TODO: Make this the default node on core-updates. This cannot be done on +;; master since this version of node requires a newer nghttp2 library at link +;; time. +(define-public node-10.22 + (package + (inherit node) + (version "10.22.0") + (source (origin + (inherit (package-source node)) + (uri (string-append "https://nodejs.org/dist/v" version + "/node-v" version ".tar.xz")) + (sha256 + (base32 + "1nz18fa550li10r0kzsm28c2rvvq61nq8bqdygip0rmvbi2paxg0")))) + (inputs + (alist-replace "nghttp2" (list nghttp2-1.41 "lib") + (package-inputs node))))) + (define-public libnode (package (inherit node) diff --git a/gnu/packages/ntp.scm b/gnu/packages/ntp.scm index 6b725c2b0f..5fa7d55845 100644 --- a/gnu/packages/ntp.scm +++ b/gnu/packages/ntp.scm @@ -80,7 +80,7 @@ (native-inputs `(("pkg-config" ,pkg-config))) (inputs - `(("libcap" ,libcap) + `(("libcap" ,libcap/next) ("libseccomp" ,libseccomp) ("nettle" ,nettle))) (home-page "https://chrony.tuxfamily.org/") @@ -143,7 +143,7 @@ time-stamping or reference clock, sub-microsecond accuracy is possible.") ;; to run as non-root (when invoked with '-u'.) ,@(if (string-suffix? "-linux" (or (%current-target-system) (%current-system))) - `(("libcap" ,libcap)) + `(("libcap" ,libcap/next)) '()))) (arguments `(#:phases diff --git a/gnu/packages/ocaml.scm b/gnu/packages/ocaml.scm index 682bc890bf..33c3fa0494 100644 --- a/gnu/packages/ocaml.scm +++ b/gnu/packages/ocaml.scm @@ -2258,19 +2258,25 @@ radix-64 representation. It is specified in RFC 4648.") (define-public ocamlify (package (name "ocamlify") - (version "0.0.1") - (source (origin - (method url-fetch) - (uri "https://download.ocamlcore.org/ocamlify/ocamlify/0.0.1/ocamlify-0.0.1.tar.gz") - (sha256 - (base32 - "1j9nb3vjqbdsx3d6jazixgrh776051zkrc06nsc5q5ilp1jhrwkm")))) + (version "0.0.2") + (source + (origin + (method url-fetch) + (uri (string-append "https://download.ocamlcore.org/ocamlify/ocamlify/" + version "/ocamlify-" version ".tar.gz")) + (sha256 + (base32 "1f0fghvlbfryf5h3j4as7vcqrgfjb4c8abl5y0y5h069vs4kp5ii")))) (build-system ocaml-build-system) - ; tests are done during build (arguments `(#:phases (modify-phases %standard-phases - (delete 'check) + (add-after 'unpack 'disable-safe-string + ;; Work around ‘Error: This expression has type string but an + ;; expression was expected of type bytes’ since OCaml 4.06. + (lambda _ + (setenv "OCAMLPARAM" "safe-string=0,_") + #t)) + (delete 'check) ; tests are run during the build (replace 'configure (lambda* (#:key outputs #:allow-other-keys) (invoke "ocaml" "setup.ml" "-configure" "--prefix" diff --git a/gnu/packages/opencl.scm b/gnu/packages/opencl.scm index 593b9044df..ddc30ef037 100644 --- a/gnu/packages/opencl.scm +++ b/gnu/packages/opencl.scm @@ -1,6 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2018 Fis Trivial <ybbs.daans@hotmail.com> -;;; Copyright © 2018 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2018, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -348,14 +348,13 @@ pocl.") (define-public python-pytools (package (name "python-pytools") - (version "2020.1") + (version "2020.4") (source (origin (method url-fetch) (uri (pypi-uri "pytools" version)) (sha256 - (base32 - "19h47pqfrq7ax7601i5g8icpb6b42h8zzwq0dqfdcjjqamwd2cn1")))) + (base32 "0q7439iy365a874ckpavx6h1mhnnngfy8nl7xj5grdd127zkknrp")))) (build-system python-build-system) (propagated-inputs `(("python-appdirs" ,python-appdirs) diff --git a/gnu/packages/package-management.scm b/gnu/packages/package-management.scm index 146020cade..bcd7c6982f 100644 --- a/gnu/packages/package-management.scm +++ b/gnu/packages/package-management.scm @@ -115,13 +115,23 @@ arch "-linux" "/20131110/guile-2.0.9.tar.xz")))) +;; NOTE: The commit IDs used here form a linked list threaded through the git +;; history. In a phenomenon known as boot-stripping, not only the head of this +;; list is used, but also a few older versions, when a guix from this package is +;; used to build something also depending on guix. +;; +;; Therefore, if, by accident, you set this package to a non-existent commit ID, +;; it is insufficient to simply correct it with the latest commit. +;; Instead, please push one commit that rolls back Guix to before the mistake, +;; and then another that points to the first one. That way, the faulty commit +;; won't appear on the linked list. (define-public guix ;; Latest version of Guix, which may or may not correspond to a release. ;; Note: the 'update-guix-package.scm' script expects this definition to ;; start precisely like this. (let ((version "1.1.0") - (commit "29d3569c9c712d70466d9175474c8fd1a3262234") - (revision 21)) + (commit "44c6e6f590b706f1ecfea6a7e7406bbd7cb70736") + (revision 25)) (package (name "guix") @@ -137,7 +147,7 @@ (commit commit))) (sha256 (base32 - "1sprs2hpi27qawscpj13v2kckagq5jhwd3bibwvz1p229m54dhg6")) + "17kmn9yrk9pxi88v4d48h9q3m5dpd2j0pf15fhxzh4k915jv8n6k")) (file-name (string-append "guix-" version "-checkout")))) (build-system gnu-build-system) (arguments @@ -548,18 +558,17 @@ out) and returning a package that uses that as its 'source'." (define-public nix (package (name "nix") - (version "2.3.6") + (version "2.3.7") (source (origin (method url-fetch) (uri (string-append "http://nixos.org/releases/nix/nix-" version "/nix-" version ".tar.xz")) (sha256 (base32 - "128xf2as0y7hr28x575pbf9lkjpxr9hsxknbavv4p7ywr4lhbs85")))) + "15p50jkss6szinisb7axhxybgfi29sm9grz7mxwair8ljj2553yx")))) (build-system gnu-build-system) (arguments - `(#:configure-flags - (list "--sysconfdir=/etc") + `(#:configure-flags '("--sysconfdir=/etc" "--enable-gc") #:phases (modify-phases %standard-phases (replace 'install @@ -991,6 +1000,15 @@ environments.") (substitute* "configure.ac" (("^GUILE_PKG.*") "GUILE_PKG([3.0 2.2])\n")) + + ;; Avoid name clash and build failure now that + ;; 'define-json-mapping' is also provided by Guile-JSON, as + ;; of version 4.3. + (substitute* (find-files "." "\\.scm$") + (("define-json-mapping") + "define-json-mapping*") + (("<=>") + "<->")) #t)) (file-name (string-append "guix-jupyter-" version "-checkout")))) (build-system gnu-build-system) @@ -1067,14 +1085,14 @@ in an isolated environment, in separate namespaces.") (define-public gcab (package (name "gcab") - (version "1.2") + (version "1.4") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/gcab/" version "/gcab-" version ".tar.xz")) (sha256 (base32 - "038h5kk41si2hc9d9169rrlvp8xgsxq27kri7hv2vr39gvz9cbas")))) + "13q43iqld4l50yra45lhvkd376pn6qpk7rkx374zn8y9wsdzm9b7")))) (build-system meson-build-system) (native-inputs `(("glib:bin" ,glib "bin") ; for glib-mkenums @@ -1130,15 +1148,15 @@ for packaging and deployment of cross-compiled Windows applications.") (define-public libostree (package (name "libostree") - (version "2020.5") - (source (origin - (method url-fetch) - (uri (string-append - "https://github.com/ostreedev/ostree/releases/download/v" - (version-major+minor version) "/libostree-" version ".tar.xz")) - (sha256 - (base32 - "1k92177hjalbdpmg45ymwwrni68vh9rs5x9zvy5fzl9lng12fgpb")))) + (version "2020.6") + (source + (origin + (method url-fetch) + (uri (string-append + "https://github.com/ostreedev/ostree/releases/download/v" + (version-major+minor version) "/libostree-" version ".tar.xz")) + (sha256 + (base32 "0wk9fgj9jl25ns2hcgcb6j24k5mvfn13b02ka0p8l4hdh8c4hpc6")))) (build-system gnu-build-system) (arguments '(#:phases @@ -1184,14 +1202,14 @@ the boot loader configuration.") (define-public flatpak (package (name "flatpak") - (version "1.8.1") + (version "1.8.2") (source (origin (method url-fetch) (uri (string-append "https://github.com/flatpak/flatpak/releases/download/" version "/flatpak-" version ".tar.xz")) (sha256 - (base32 "1bcymiv0yzs05rplbyzpimb1k17s345a95y0dhw7jh56z5k4p4b6")))) + (base32 "1c45a0k7wx685n5b3ihv7dk0mm2kmwbw7cx8w5g2la62yxfn49kr")))) ;; Wrap 'flatpak' so that GIO_EXTRA_MODULES is set, thereby allowing GIO to ;; find the TLS backend in glib-networking. @@ -1227,7 +1245,7 @@ cp -r /tmp/locale/*/en_US.*"))) (("/usr/bin/python3") (which "python3"))) #t)) ;; Many tests fail for unknown reasons, so we just run a few basic - ;; tests + ;; tests. (replace 'check (lambda _ (setenv "HOME" "/tmp") diff --git a/gnu/packages/pascal.scm b/gnu/packages/pascal.scm new file mode 100644 index 0000000000..811d02f128 --- /dev/null +++ b/gnu/packages/pascal.scm @@ -0,0 +1,279 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2017 Kei Kebreau <address@hidden> +;;; Copyright © 2020 Eric Bavier <bavier@posteo.net> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu packages pascal) + #:use-module ((guix licenses) #:prefix license:) + #:use-module (guix packages) + #:use-module (guix download) + #:use-module (guix utils) + #:use-module (guix build-system gnu) + #:use-module (gnu packages) + #:use-module (gnu packages base) + #:use-module (gnu packages bootstrap) + #:use-module (gnu packages commencement) + #:use-module (gnu packages compression) + #:use-module (gnu packages gcc) + #:use-module (gnu packages ncurses) + #:use-module (gnu packages perl) + #:use-module (gnu packages xml) + #:use-module (ice-9 match)) + +(define fpc-bootstrap-i386-3.0.4 + (origin + (method url-fetch) + (uri + "mirror://sourceforge/freepascal/Linux/3.0.4/fpc-3.0.4.i386-linux.tar") + (sha256 + (base32 + "05xfgxa6vb0y2ryfsgn21m2kwaxhci6l2zxa3akvlnqminjsjvda")))) + +(define fpc-bootstrap-x86_64-3.0.4 + (origin + (method url-fetch) + (uri + "mirror://sourceforge/freepascal/Linux/3.0.4/fpc-3.0.4.x86_64-linux.tar") + (sha256 + (base32 + "0xzxh689iyjfmkqkhcqg9plrjmdx82hbyywyyc7jm0n92fpmp5ky")))) + +(define-public fpc + (package + (name "fpc") + (version "3.2.0") ; Update release date below! + (source (origin + (method url-fetch) + (uri (string-append "mirror://sourceforge/freepascal/Source/" + version "/fpcbuild-" version ".tar.gz")) + (file-name (string-append name "-" version ".tar.gz")) + (sha256 + (base32 + "0f38glyn3ffmqww432snhx2b8wyrq0yj1njkp4zh56lqrvm19fgr")) + (patches (search-patches "fpc-reproducibility.patch")) + (modules '((guix build utils))) + (snippet + '(begin + (rename-file "install/doc" "install-doc") + (rename-file "install/man" "install-man") + ;; Contains executables--some of them created by + ;; closed-source compilers. + (delete-file-recursively "install") + (mkdir-p "install") + (rename-file "install-doc" "install/doc") + (rename-file "install-man" "install/man") + (delete-file "fpcsrc/tests/utils/dosbox/exitcode.exe") + #t)))) + (build-system gnu-build-system) + (supported-systems '("i686-linux" "x86_64-linux")) + (inputs + `(("expat" ,expat) + ("glibc" ,glibc) + ("ld-wrapper" ,ld-wrapper) + ("ncurses" ,ncurses) + ("zlib" ,zlib))) + (native-inputs + ;; FPC is built with FPC, so we need bootstrap binaries. + `(("fpc-binary" + ,(match (or (%current-target-system) + (%current-system)) + ("i686-linux" fpc-bootstrap-i386-3.0.4) + ;("powerpc64le-linux" fpc-bootstrap-ppc64le-3.0.4) + ;("powerpc-linux" fpc-bootstrap-ppc-3.0.4) + ("x86_64-linux" fpc-bootstrap-x86_64-3.0.4) + (_ fpc-bootstrap-x86_64-3.0.4))))) + (arguments + `(#:tests? #f ; no tests available + #:phases + (let ((fpc-bootstrap-path + (string-append (getcwd) "/" ,name "-" ,version "/fpc-bin")) + (arch ,(match (or (%current-target-system) + (%current-system)) + ("i686-linux" "i386") + ("x86_64-linux" "x86_64") + (_ "unknown")))) + (modify-phases %standard-phases + (add-after 'unpack 'unpack-bin + (lambda* (#:key inputs #:allow-other-keys) + (mkdir-p fpc-bootstrap-path) + (with-directory-excursion fpc-bootstrap-path + (invoke "tar" "xvf" (assoc-ref inputs "fpc-binary"))))) + (add-after 'unpack-bin 'install-bin + (lambda* (#:key inputs #:allow-other-keys) + (with-directory-excursion + (string-append fpc-bootstrap-path "/fpc-3.0.4." + arch "-linux") + (let ((binary-tarball + (string-append "binary." arch "-linux.tar")) + (compiler-tarball + (string-append "base." arch "-linux.tar.gz")) + (fpcmake-tarball + (string-append "utils-fpcm." arch "-linux.tar.gz"))) + ;; Only the base compiler and fpcmake are needed. + (invoke "tar" "xvf" binary-tarball compiler-tarball + fpcmake-tarball) + (invoke "tar" "xvf" compiler-tarball "-C..") + (invoke "tar" "xvf" fpcmake-tarball "-C.."))))) + (add-after 'patch-source-shebangs 'patch-inline-shebangs + (lambda _ + (substitute* "fpcsrc/compiler/cscript.pas" + (("#!/bin/sh") (string-append "#!" (which "sh")))) + #t)) + (add-before 'build 'patch-release-date + (lambda _ ; reproducibility + (substitute* (list "fpcdocs/prog.tex" + "fpcsrc/packages/amunits/examples/sortdemo.pas" + "fpcsrc/packages/libogcfpc/src/ogc/libversion.inc" + "fpcsrc/utils/fpcres/fpcjres.pas" + "fpcsrc/utils/fpcres/fpcres.pas" + "fpcsrc/utils/fpcm/fpcmmain.pp" + "fpcsrc/utils/fpcreslipo/fpcreslipo.pp" + "fpcsrc/compiler/version.pas") + (("\\{\\$I(NCLUDE)? %DATE%\\}") "'2020/06/19'")) + #t)) + (replace 'configure + (lambda* (#:key inputs outputs #:allow-other-keys) + (substitute* "fpcsrc/compiler/systems/t_linux.pas" + ;; Point to the current glibc dynamic linker. + (("/lib/ld-linux.so.2") + (string-append (assoc-ref inputs "libc") + ,(glibc-dynamic-linker))) + (("/lib64/ld-linux-x86-64.so.2") + (string-append (assoc-ref inputs "libc") + ,(glibc-dynamic-linker))) + ; TODO: /lib/ld-linux-armhf.so.3 + ; TODO: /lib/ld-linux-aarch64.so.1 + ; TODO: /lib64/ld64.so.2 + ;; Add glibc to ld's search path. + (("if \\(isdll\\) then") + (string-append + "Add('SEARCH_DIR(\"" + (assoc-ref inputs "libc") "/lib" + "\")');\n" + "if (isdll) then"))) + (substitute* "fpcsrc/compiler/options.pas" + (("exepath\\+'../etc/'") + (string-append "'" (assoc-ref outputs "out") "/etc'"))) + #t)) + (replace 'build + (lambda* (#:key inputs #:allow-other-keys) + (let* ((fpc-bin (string-append fpc-bootstrap-path "/bin")) + (fpc (string-append fpc-bin "/fpc")) + (fpcmake (string-append fpc-bin "/fpcmake"))) + ;; The fpc binary needs to run the ppc[arch] binary (which + ;; does the actual compiling) in this directory. + (setenv "PATH" + (string-append (getenv "PATH") ":" + fpc-bootstrap-path + "/lib/fpc/3.0.4")) + (setenv "FPC" fpc) + ;; Specify target operating system using "-T" option + (invoke fpcmake (string-append "-T" arch "-linux")) + (invoke "make" "build" "NOGDB=1")))) + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + ;; This is the suffix of the ppc[arch] binary. + (suffix (if (string= arch "x86_64") + "x64" + "386")) + (ppc (string-append "ppc" suffix))) + (invoke "make" "install" "NOGDB=1" + (string-append "INSTALL_PREFIX=" out)) + ;; Remove files that fail RUNPATH validation. + ;; TODO: Fix it instead. + (delete-file (string-append out "/lib/libpas2jslib.so")) + ;; Add a symlink to the ppc[arch] binary so fpc works. + (symlink (string-append out "/lib/fpc/" ,version "/" ppc) + (string-append out "/bin/" ppc)) + ;; Install the example configuration file. + (mkdir (string-append out "/etc")) + (invoke + (string-append out "/lib/fpc/" ,version "/samplecfg") + (string-append out "/lib/fpc/" ,version) + (string-append out "/etc"))))) + (add-after 'install 'wrap + (lambda* (#:key inputs outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (fpc (string-append out "/bin/fpc")) + (ld (assoc-ref inputs "ld-wrapper")) + (glibc (assoc-ref inputs "glibc"))) + (wrap-program fpc + `("PATH" ":" prefix (,(string-append ld "/bin"))) + `("LIBRARY_PATH" ":" prefix (,(string-append glibc "/lib")))) + #t))))))) + ;; fpc invokes gcc, so make sure LIBRARY_PATH et.al are set. + ;(native-search-paths (package-native-search-paths gcc)) + (home-page "http://www.freepascal.org") + (synopsis "The Free Pascal Compiler") + (description + "Free Pascal is a professional Object Pascal compiler. It supports the +Turbo Pascal 7.0, Delphi, and Mac Pascal dialects. Free Pascal also supports +many useful extensions to the Pascal programming language.") + ;; The majority of the software included is licensed under the GPLv2 + ;; or later. For more licensing details, see the appropriate files in + ;; the install/doc directory of the source distribution. + (license license:gpl2+))) + +(define-public p2c + (package + (name "p2c") + (version "2.01") + (source (origin + (method url-fetch) + (uri (string-append "https://alum.mit.edu/www/toms/p2c/p2c-" + version ".tar.gz")) + (sha256 + (base32 + "03x72lv6jrvikbrpz4kfq1xp61l2jw5ki6capib71lxs65zndajn")))) + (build-system gnu-build-system) + (arguments + `(#:make-flags + (let ((out (assoc-ref %outputs "out"))) + (list (string-append "CC=" ,(cc-for-target)) + (string-append "HOMEDIR=" out "/lib/p2c") + (string-append "INCDIR=" out "/include/p2c") + (string-append "BINDIR=" out "/bin") + (string-append "LIBDIR=" out "/lib") + (string-append "MANDIR=" out "/share/man/man1") + "MANFILE=p2c.man.inst")) + #:test-target "test" + #:phases + (modify-phases %standard-phases + (delete 'configure) + (add-before 'build 'mkdir + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (mkdir-p (string-append out "/share/man")) + (mkdir-p (string-append out "/lib")) + (mkdir-p (string-append out "/bin")) + (mkdir-p (string-append out "/include"))) + #t)) + (add-before 'build 'chdir + (lambda* (#:key make-flags #:allow-other-keys) + (chdir "src") + #t))))) + (native-inputs + `(("perl" ,perl) + ("which" ,which))) + (synopsis "p2c converts Pascal programs to C programs--which you can then +compile using gcc") + (description "This package provides @command{p2c}, a program to convert +Pascal source code to C source code, and @command{p2cc}, a compiler for +Pascal programs.") + (home-page "http://users.fred.net/tds/lab/p2c/") + (license license:gpl2+))) diff --git a/gnu/packages/password-utils.scm b/gnu/packages/password-utils.scm index 4ffd3ceff1..85dbeef28f 100644 --- a/gnu/packages/password-utils.scm +++ b/gnu/packages/password-utils.scm @@ -719,7 +719,7 @@ using password-store through rofi interface: (define-public browserpass-native (package (name "browserpass-native") - (version "3.0.6") + (version "3.0.7") (source (origin (method git-fetch) @@ -729,7 +729,7 @@ using password-store through rofi interface: (file-name (git-file-name name version)) (sha256 (base32 - "0q3bsla07zjl6i69nj1axbkg2ia89pvh0jg6nlqgbm2kpzzbn0pz")))) + "1jkjslbbac49xjyjkc2b07phdm3i64z40kh6h55cl22dxjmpp1nb")))) (build-system go-build-system) (arguments `(#:import-path "github.com/browserpass/browserpass-native" diff --git a/gnu/packages/patches/emacs-exec-path.patch b/gnu/packages/patches/emacs-exec-path.patch index 884fa94a64..7303599df1 100644 --- a/gnu/packages/patches/emacs-exec-path.patch +++ b/gnu/packages/patches/emacs-exec-path.patch @@ -4,15 +4,13 @@ with things like GCC being referenced. --- a/lisp/loadup.el +++ b/lisp/loadup.el -@@ -64,6 +64,11 @@ - (expand-file-name "textmodes" dir) - (expand-file-name "vc" dir))))) - -+;; Reset 'exec-path' so we don't capture the build-time $PATH in the -+;; 'emacs' executable. -+(setq-default exec-path nil) -+(setq exec-path nil) -+ - (if (eq t purify-flag) - ;; Hash consing saved around 11% of pure space in my tests. - (setq purify-flag (make-hash-table :test 'equal :size 70000))) +@@ -481,7 +481,8 @@ lost after dumping"))) + ((equal dump-mode "dump") "emacs") + ((equal dump-mode "bootstrap") "emacs") + ((equal dump-mode "pbootstrap") "bootstrap-emacs.pdmp") +- (t (error "unrecognized dump mode %s" dump-mode))))) ++ (t (error "unrecognized dump mode %s" dump-mode)))) ++ (exec-path nil)) + (message "Dumping under the name %s" output) + (condition-case () + (delete-file output) diff --git a/gnu/packages/patches/emacs-ignore-empty-xim-styles.patch b/gnu/packages/patches/emacs-ignore-empty-xim-styles.patch index 606d3ece6f..398e65bdc8 100644 --- a/gnu/packages/patches/emacs-ignore-empty-xim-styles.patch +++ b/gnu/packages/patches/emacs-ignore-empty-xim-styles.patch @@ -5,7 +5,7 @@ Index: emacs-26.3/src/xfns.c =================================================================== --- emacs-26.3.orig/src/xfns.c +++ emacs-26.3/src/xfns.c -@@ -2533,6 +2533,8 @@ xic_free_xfontset (struct frame *f) +@@ -2628,6 +2628,8 @@ xic_free_xfontset (struct frame *f) static XIMStyle best_xim_style (XIMStyles *xim) { @@ -14,7 +14,7 @@ Index: emacs-26.3/src/xfns.c int i, j; int nr_supported = ARRAYELTS (supported_xim_styles); -@@ -2541,6 +2543,7 @@ best_xim_style (XIMStyles *xim) +@@ -2636,6 +2638,7 @@ best_xim_style (XIMStyles *xim) if (supported_xim_styles[i] == xim->supported_styles[j]) return supported_xim_styles[i]; diff --git a/gnu/packages/patches/emacs-source-date-epoch.patch b/gnu/packages/patches/emacs-source-date-epoch.patch index 41c03ef514..77ea7ac15c 100644 --- a/gnu/packages/patches/emacs-source-date-epoch.patch +++ b/gnu/packages/patches/emacs-source-date-epoch.patch @@ -3,9 +3,9 @@ Honor SOURCE_DATE_EPOCH variable to avoid non-determinism in generated --- a/lisp/emacs-lisp/autoload.el +++ b/lisp/emacs-lisp/autoload.el -@@ -378,8 +378,12 @@ - "Insert the section-header line, - which lists the file name and which functions are in it, etc." +@@ -419,8 +419,12 @@ + ;; nil t)) + ;; (match-end 2)))) (insert generate-autoload-section-header) - (prin1 `(autoloads ,autoloads ,load-name ,file ,time) - outbuf) diff --git a/gnu/packages/patches/emacs27-exec-path.patch b/gnu/packages/patches/emacs27-exec-path.patch deleted file mode 100644 index 418aa633a1..0000000000 --- a/gnu/packages/patches/emacs27-exec-path.patch +++ /dev/null @@ -1,18 +0,0 @@ -Do not capture the build-time value of $PATH in the 'emacs' executable -since this can noticeably increase the size of the closure of Emacs -with things like GCC being referenced. - -(like emacs-exec-path.patch, but for Emacs 27) - ---- a/lisp/loadup.el -+++ b/lisp/loadup.el -@@ -479,7 +479,8 @@ lost after dumping"))) - ((equal dump-mode "dump") "emacs") - ((equal dump-mode "bootstrap") "emacs") - ((equal dump-mode "pbootstrap") "bootstrap-emacs.pdmp") -- (t (error "unrecognized dump mode %s" dump-mode))))) -+ (t (error "unrecognized dump mode %s" dump-mode)))) -+ (exec-path nil)) - (message "Dumping under the name %s" output) - (condition-case () - (delete-file output) diff --git a/gnu/packages/patches/fpc-reproducibility.patch b/gnu/packages/patches/fpc-reproducibility.patch new file mode 100644 index 0000000000..619f42b3b5 --- /dev/null +++ b/gnu/packages/patches/fpc-reproducibility.patch @@ -0,0 +1,28 @@ +Remove/patch metadata timestamps for reproducibility. + +diff -ur fpcbuild-3.0.0.old/fpcsrc/packages/fpmkunit/src/fpmkunit.pp fpcbuild-3.0.0/fpcsrc/packages/fpmkunit/src/fpmkunit.pp +--- fpcbuild-3.0.0.old/fpcsrc/packages/fpmkunit/src/fpmkunit.pp 2015-11-04 16:17:00.000000000 -0500 ++++ fpcbuild-3.0.0/fpcsrc/packages/fpmkunit/src/fpmkunit.pp 2017-01-26 16:25:29.327339282 -0500 +@@ -3779,7 +3779,7 @@ + Values[KeyName]:=Name; + Values[KeyVersion]:=Version; + // TODO Generate checksum based on PPUs +- InstalledChecksum:=DateTimeToFileDate(Now); ++ InstalledChecksum:=0; + Values[KeyChecksum]:=IntToStr(InstalledChecksum); + Values[KeyCPU]:=CPUToString(ACPU); + Values[KeyOS]:=OSToString(AOS); +diff -ur fpcbuild-3.0.0.old/fpcsrc/utils/fpcmkcfg/fpcmkcfg.pp fpcbuild-3.0.0/fpcsrc/utils/fpcmkcfg/fpcmkcfg.pp +--- fpcbuild-3.0.0.old/fpcsrc/utils/fpcmkcfg/fpcmkcfg.pp 2013-06-01 18:27:16.000000000 -0400 ++++ fpcbuild-3.0.0/fpcsrc/utils/fpcmkcfg/fpcmkcfg.pp 2017-01-26 16:24:22.949044903 -0500 +@@ -234,8 +234,8 @@ + TemplateParser.Values['FPCTARGETOS'] := BuildOSTarget; + TemplateParser.Values['FPCBIN'] := 'fpc'; + TemplateParser.Values['PWD'] := GetCurrentDir; +- TemplateParser.Values['BUILDDATE'] := DateToStr(Date); +- TemplateParser.Values['BUILDTIME'] := TimeToStr(Time); ++ TemplateParser.Values['BUILDDATE'] := ''; ++ TemplateParser.Values['BUILDTIME'] := ''; + + TemplateParser.Values['LOCALREPOSITORY'] := GetDefaultLocalRepository; + TemplateParser.Values['LOCALBASEPATH'] := GetDefaultLocalBasepath; diff --git a/gnu/packages/patches/genimage-signedness.patch b/gnu/packages/patches/genimage-signedness.patch new file mode 100644 index 0000000000..2204dfb545 --- /dev/null +++ b/gnu/packages/patches/genimage-signedness.patch @@ -0,0 +1,24 @@ +commit 6574665f9d6c0757e8f55ccb465afbcaa90bf019 +Author: Timotej Lazar <timotej.lazar@araneo.si> +Date: Wed Aug 19 19:36:02 2020 +0200 + + test: normalize flags reported by dumpe2fs + + Filesystem flags depend on the system – usually signed_directory_hash, + but unsigned_directory_hash at least on arm64. + + Signed-off-by: Timotej Lazar <timotej.lazar@araneo.si> + +diff --git a/test/basic-images.test b/test/basic-images.test +index f6685e1..cb104c3 100755 +--- a/test/basic-images.test ++++ b/test/basic-images.test +@@ -158,6 +158,8 @@ check_ext() { + # format change + csum2="Group 0: (Blocks 1-4095) \\[ITABLE_ZEROED\\]\| Checksum .*, unused inodes 205" + dumpe2fs "${1}" | grep -v "^\($uuid\|$seed\|$csum1\|$csum2\)" > "dump" && ++ # some architectures (including arm64) use unsigned char ++ sed -i 's/un\(signed_directory_hash\)/\1/' "dump" && + # fixup for ext3 journal size with old tune2fs + sed -i 's/^\(Journal size: \)1029k$/\11024k/' "dump" && + # output format changed with some version diff --git a/gnu/packages/patches/gpodder-disable-updater.patch b/gnu/packages/patches/gpodder-disable-updater.patch new file mode 100644 index 0000000000..1aa0afe4f1 --- /dev/null +++ b/gnu/packages/patches/gpodder-disable-updater.patch @@ -0,0 +1,18 @@ +Description: Modify the default value for check_on_startup to false. + This prevents an privacy/information disclosure unless the user + explicitly opts-in for the update check. +Forwarded: not-needed +Origin: vendor +Author: tony mancill <tmancill@debian.org> + +--- a/src/gpodder/config.py ++++ b/src/gpodder/config.py +@@ -93,7 +93,7 @@ + + # Software updates from gpodder.org + 'software_update': { +- 'check_on_startup': True, # check for updates on start ++ 'check_on_startup': False, # check for updates on start + 'last_check': 0, # unix timestamp of last update check + 'interval': 5, # interval (in days) to check for updates + }, diff --git a/gnu/packages/patches/r-httpuv-1.5.4-unvendor-libuv.patch b/gnu/packages/patches/r-httpuv-1.5.4-unvendor-libuv.patch new file mode 100644 index 0000000000..0947718059 --- /dev/null +++ b/gnu/packages/patches/r-httpuv-1.5.4-unvendor-libuv.patch @@ -0,0 +1,59 @@ +Removes references to bundled libuv. + +--- a/src/Makevars 2020-07-31 11:53:30.576484531 +0200 ++++ b/src/Makevars 2020-07-31 11:54:19.369863118 +0200 +@@ -5,7 +5,7 @@ + + UNAME := $(shell uname) + +-PKG_LIBS = ./libuv/.libs/libuv.a ./http-parser/http_parser.o ./sha1/sha1.o ./base64/base64.o -pthread ++PKG_LIBS = -luv ./http-parser/http_parser.o ./sha1/sha1.o ./base64/base64.o -pthread + + ifeq ($(UNAME), Darwin) + PKG_LIBS += -framework CoreServices +@@ -23,7 +23,7 @@ + + PKG_CFLAGS = $(C_VISIBILITY) -DSTRICT_R_HEADERS + PKG_CXXFLAGS = $(CXX_VISIBILITY) -DSTRICT_R_HEADERS +-PKG_CPPFLAGS = -Ilibuv/include -pthread ++PKG_CPPFLAGS = -pthread + + # To avoid spurious warnings from `R CMD check --as-cran`, about compiler + # warning flags like -Werror. +@@ -43,35 +43,5 @@ + # PKG_CPPFLAGS += -D_GLIBCXX_ASSERTIONS + + +-$(SHLIB): libuv/.libs/libuv.a http-parser/http_parser.o sha1/sha1.o base64/base64.o ++$(SHLIB): http-parser/http_parser.o sha1/sha1.o base64/base64.o + +-# We needed to rename lt~obsolete.m4 because the name causes problems with R +-# CMD check. Here we rename it back. +-libuv/m4/lt~obsolete.m4: libuv/m4/lt_obsolete.m4 +- cp -p -f libuv/m4/lt_obsolete.m4 libuv/m4/lt~obsolete.m4 +- +-# Run ./configure. We need to touch various autotools-related files to avoid +-# it trying to run autotools programs again. We also need to make sure +-# configure is executable, because on some platforms, calling unzip() in R +-# does not preserve the executable bit. +-# +-# It's VERY IMPORTANT that mtime(aclocal.m4) <= mtime(configure), and also +-# mtime(aclocal.m4) <= mtime(Makefile.in). On some platforms, passing multiple +-# files to a single touch command gives them all the same time, but on others +-# (Solaris and possibly some Fedoras) the timestamps are slightly increasing +-# from one to the next, i.e. the order matters. To remove this fragility, we +-# use "-r aclocal.m4" to ensure that all three files are guaranteed to have +-# precisely the same timestamp value. +-libuv/Makefile: libuv/m4/lt~obsolete.m4 +- (cd libuv \ +- && touch aclocal.m4 \ +- && touch -r aclocal.m4 configure Makefile.in \ +- && chmod +x configure \ +- && CC="$(CC)" CFLAGS="$(CFLAGS) $(CPICFLAGS) $(C_VISIBILITY)" AR="$(AR)" RANLIB="$(RANLIB)" LDFLAGS="$(LDFLAGS)" ./configure $(CONFIGURE_FLAGS)) +- +-libuv/.libs/libuv.a: libuv/Makefile +- $(MAKE) --directory=libuv \ +- HAVE_DTRACE=0 +- +-clean: +- $(MAKE) --directory=libuv distclean diff --git a/gnu/packages/patches/sooperlooper-build-with-wx-30.patch b/gnu/packages/patches/sooperlooper-build-with-wx-30.patch deleted file mode 100644 index 43f4b9be69..0000000000 --- a/gnu/packages/patches/sooperlooper-build-with-wx-30.patch +++ /dev/null @@ -1,179 +0,0 @@ -Downloaded from https://anonscm.debian.org/cgit/pkg-multimedia/sooperlooper.git/plain/debian/patches/04-build_with_wx_30.patch -O gnu/packages/patches/sooperlooper-build-with-wx-30.patch - -Author: Jaromír Mikeš <mira.mikes@seznam.cz>, Olly Betts <olly@survex.com> -Description: build against wx 3.0. -Forwarded: yes - -Index: sooperlooper/src/gui/main_panel.cpp -=================================================================== ---- sooperlooper.orig/src/gui/main_panel.cpp -+++ sooperlooper/src/gui/main_panel.cpp -@@ -448,7 +448,7 @@ MainPanel::init_loopers (int count) - while (count < (int)_looper_panels.size()) { - looperpan = _looper_panels.back(); - _looper_panels.pop_back(); -- _main_sizer->Remove(looperpan); -+ _main_sizer->Detach(looperpan); - looperpan->Destroy(); - } - } -@@ -1277,7 +1277,7 @@ void MainPanel::misc_action (bool releas - } - - -- wxString filename = do_file_selector (wxT("Choose file to save loop"), wxT("wav"), wxT("WAVE files (*.wav)|*.wav;*.WAV;*.Wav"), wxSAVE|wxCHANGE_DIR|wxOVERWRITE_PROMPT); -+ wxString filename = do_file_selector (wxT("Choose file to save loop"), wxT("wav"), wxT("WAVE files (*.wav)|*.wav;*.WAV;*.Wav"), wxFD_SAVE|wxFD_CHANGE_DIR|wxFD_OVERWRITE_PROMPT); - - if ( !filename.empty() ) - { -@@ -1296,7 +1296,7 @@ void MainPanel::misc_action (bool releas - index = 0; - } - -- wxString filename = do_file_selector (wxT("Choose file to open"), wxT(""), wxT("*.slsess"), wxOPEN|wxCHANGE_DIR); -+ wxString filename = do_file_selector (wxT("Choose file to open"), wxT(""), wxT("*.slsess"), wxFD_OPEN|wxFD_CHANGE_DIR); - - if ( !filename.empty() ) - { -@@ -1408,7 +1408,7 @@ void MainPanel::set_curr_loop (int index - - void MainPanel::do_load_session () - { -- wxString filename = do_file_selector (wxT("Choose session to load"), wxT("*.slsess"), wxT("*.slsess"), wxOPEN|wxCHANGE_DIR); -+ wxString filename = do_file_selector (wxT("Choose session to load"), wxT("*.slsess"), wxT("*.slsess"), wxFD_OPEN|wxFD_CHANGE_DIR); - - if ( !filename.empty() ) - { -@@ -1419,7 +1419,7 @@ void MainPanel::do_load_session () - - void MainPanel::do_save_session (bool write_audio) - { -- wxString filename = do_file_selector (wxT("Choose file to save session"), wxT("slsess"), wxT("*.slsess"), wxSAVE|wxCHANGE_DIR|wxOVERWRITE_PROMPT); -+ wxString filename = do_file_selector (wxT("Choose file to save session"), wxT("slsess"), wxT("*.slsess"), wxFD_SAVE|wxFD_CHANGE_DIR|wxFD_OVERWRITE_PROMPT); - - if ( !filename.empty() ) - { -Index: sooperlooper/src/gui/pix_button.cpp -=================================================================== ---- sooperlooper.orig/src/gui/pix_button.cpp -+++ sooperlooper/src/gui/pix_button.cpp -@@ -250,7 +250,7 @@ PixButton::OnMouseEvents (wxMouseEvent & - pt.x += bounds.x; - pt.y += bounds.y; - -- if (bounds.Inside(pt)) { -+ if (bounds.Contains(pt)) { - clicked (get_mouse_button(ev)); // emit - - if (ev.MiddleUp() && ev.ControlDown()) { -Index: sooperlooper/src/gui/looper_panel.cpp -=================================================================== ---- sooperlooper.orig/src/gui/looper_panel.cpp -+++ sooperlooper/src/gui/looper_panel.cpp -@@ -1428,7 +1428,7 @@ LooperPanel::clicked_events (int button, - if (cmd == wxT("save")) - { - wxString filename = _mainpanel->do_file_selector (wxT("Choose file to save loop"), -- wxT("wav"), wxT("WAVE files (*.wav)|*.wav;*.WAV;*.Wav"), wxSAVE|wxCHANGE_DIR|wxOVERWRITE_PROMPT); -+ wxT("wav"), wxT("WAVE files (*.wav)|*.wav;*.WAV;*.Wav"), wxFD_SAVE|wxFD_CHANGE_DIR|wxFD_OVERWRITE_PROMPT); - - if ( !filename.empty() ) - { -@@ -1442,7 +1442,7 @@ LooperPanel::clicked_events (int button, - } - else if (cmd == wxT("load")) - { -- wxString filename = _mainpanel->do_file_selector(wxT("Choose file to open"), wxT(""), wxT("Audio files (*.wav,*.aif)|*.wav;*.WAV;*.Wav;*.aif;*.aiff;*.AIF;*.AIFF|All files (*.*)|*.*"), wxOPEN|wxCHANGE_DIR); -+ wxString filename = _mainpanel->do_file_selector(wxT("Choose file to open"), wxT(""), wxT("Audio files (*.wav,*.aif)|*.wav;*.WAV;*.Wav;*.aif;*.aiff;*.AIF;*.AIFF|All files (*.*)|*.*"), wxFD_OPEN|wxFD_CHANGE_DIR); - - if ( !filename.empty() ) - { -Index: sooperlooper/src/gui/keyboard_target.cpp -=================================================================== ---- sooperlooper.orig/src/gui/keyboard_target.cpp -+++ sooperlooper/src/gui/keyboard_target.cpp -@@ -553,10 +553,10 @@ KeyboardTarget::keycode_from_name (const - keycode = WXK_RETURN; - } - else if ( keyname == wxT("PGUP") ) { -- keycode = WXK_PRIOR; -+ keycode = WXK_PAGEUP; - } - else if ( keyname == wxT("PGDN") ) { -- keycode = WXK_NEXT; -+ keycode = WXK_PAGEDOWN; - } - else if ( keyname == wxT("LEFT") ) { - keycode = WXK_LEFT; -@@ -630,10 +630,10 @@ wxString KeyboardTarget::name_from_keyco - case WXK_RETURN: - text += wxT("return"); - break; -- case WXK_PRIOR: -+ case WXK_PAGEUP: - text += wxT("pageup"); - break; -- case WXK_NEXT: -+ case WXK_PAGEDOWN: - text += wxT("pagedown"); - break; - case WXK_LEFT: -Index: sooperlooper/src/gui/check_box.cpp -=================================================================== ---- sooperlooper.orig/src/gui/check_box.cpp -+++ sooperlooper/src/gui/check_box.cpp -@@ -237,7 +237,7 @@ CheckBox::OnMouseEvents (wxMouseEvent &e - } - else if (ev.LeftUp()) - { -- if (bounds.Inside(ev.GetPosition())) { -+ if (bounds.Contains(ev.GetPosition())) { - // toggle value - _value = !_value; - -Index: sooperlooper/src/gui/midi_bind_panel.cpp -=================================================================== ---- sooperlooper.orig/src/gui/midi_bind_panel.cpp -+++ sooperlooper/src/gui/midi_bind_panel.cpp -@@ -880,7 +880,7 @@ void MidiBindPanel::on_button (wxCommand - } - else if (ev.GetId() == ID_LoadButton) - { -- wxString filename = _parent->do_file_selector(wxT("Choose midi binding file to open"), wxT(""), wxT("*.slb"), wxOPEN|wxCHANGE_DIR); -+ wxString filename = _parent->do_file_selector(wxT("Choose midi binding file to open"), wxT(""), wxT("*.slb"), wxFD_OPEN|wxFD_CHANGE_DIR); - if ( !filename.empty() ) - { - _parent->get_loop_control().load_midi_bindings(filename, _append_check->GetValue()); -@@ -888,7 +888,7 @@ void MidiBindPanel::on_button (wxCommand - } - else if (ev.GetId() == ID_SaveButton) - { -- wxString filename = _parent->do_file_selector(wxT("Choose midi binding file to save"), wxT(""), wxT("*.slb"), wxSAVE|wxCHANGE_DIR|wxOVERWRITE_PROMPT); -+ wxString filename = _parent->do_file_selector(wxT("Choose midi binding file to save"), wxT(""), wxT("*.slb"), wxFD_SAVE|wxFD_CHANGE_DIR|wxFD_OVERWRITE_PROMPT); - - if ( !filename.empty() ) - { -Index: sooperlooper/src/gui/config_panel.cpp -=================================================================== ---- sooperlooper.orig/src/gui/config_panel.cpp -+++ sooperlooper/src/gui/config_panel.cpp -@@ -378,7 +378,7 @@ void ConfigPanel::on_button (wxCommandEv - else if (ev.GetId() == ID_MidiBrowseButton) { - - _parent->get_keyboard().set_enabled(false); -- wxString filename = _parent->do_file_selector(wxT("Choose midi binding file to use"), wxT(""), wxT("*.slb"), wxOPEN|wxCHANGE_DIR); -+ wxString filename = _parent->do_file_selector(wxT("Choose midi binding file to use"), wxT(""), wxT("*.slb"), wxFD_OPEN|wxFD_CHANGE_DIR); - _parent->get_keyboard().set_enabled(true); - - if ( !filename.empty() ) -@@ -389,8 +389,8 @@ void ConfigPanel::on_button (wxCommandEv - else if (ev.GetId() == ID_SessionBrowseButton) { - - _parent->get_keyboard().set_enabled(false); -- wxString filename = _parent->do_file_selector(wxT("Choose session file to use"), wxT(""), wxT("*.slsess"), wxOPEN|wxCHANGE_DIR); -- //wxString filename = wxFileSelector(wxT("Choose session file to use"), wxT(""), wxT(""), wxT(""), wxT("*.slsess"), wxOPEN|wxCHANGE_DIR); -+ wxString filename = _parent->do_file_selector(wxT("Choose session file to use"), wxT(""), wxT("*.slsess"), wxFD_OPEN|wxFD_CHANGE_DIR); -+ //wxString filename = wxFileSelector(wxT("Choose session file to use"), wxT(""), wxT(""), wxT(""), wxT("*.slsess"), wxFD_OPEN|wxFD_CHANGE_DIR); - _parent->get_keyboard().set_enabled(true); - - if ( !filename.empty() ) diff --git a/gnu/packages/patches/sssd-system-directories.patch b/gnu/packages/patches/sssd-system-directories.patch new file mode 100644 index 0000000000..f2ab0182e1 --- /dev/null +++ b/gnu/packages/patches/sssd-system-directories.patch @@ -0,0 +1,56 @@ +Do not attempt to create $localstatedir and $sysconfdir (i.e., /var and /etc) +upon "make install". + +diff --git a/Makefile.in b/Makefile.in +index c32cb7d..77a5c00 100644 +--- a/Makefile.in ++++ b/Makefile.in +@@ -7991,7 +7991,7 @@ sssdconfdir = $(sysconfdir)/sssd + sssddatadir = $(datadir)/sssd + sssdapiplugindir = $(sssddatadir)/sssd.api.d + sssdtapscriptdir = $(sssddatadir)/systemtap +-dbuspolicydir = $(sysconfdir)/dbus-1/system.d ++dbuspolicydir = $(prefix)/etc/dbus-1/system.d + dbusservicedir = $(datadir)/dbus-1/system-services + sss_statedir = $(localstatedir)/lib/sss + pamlibdir = @pammoddir@ +@@ -8000,7 +8000,7 @@ nfslibdir = @nfsidmaplibdir@ + keytabdir = $(sss_statedir)/keytabs + pkgconfigdir = $(libdir)/pkgconfig + sudolibdir = @sudolibpath@ +-pamconfdir = $(sysconfdir)/pam.d ++pamconfdir = $(prefix)/etc/pam.d + systemtap_tapdir = @tapset_dir@ + sssdkcmdatadir = $(datadir)/sssd-kcm + deskprofilepath = $(sss_statedir)/deskprofile +@@ -43733,7 +43733,6 @@ installsssddirs:: + $(DESTDIR)$(bindir) \ + $(DESTDIR)$(sbindir) \ + $(DESTDIR)$(mandir) \ +- $(DESTDIR)$(pidpath) \ + $(DESTDIR)$(pluginpath) \ + $(DESTDIR)$(libdir)/ldb \ + $(DESTDIR)$(dbuspolicydir) \ +@@ -43743,22 +43742,9 @@ installsssddirs:: + $(DESTDIR)$(sssddatadir) \ + $(DESTDIR)$(sudolibdir) \ + $(DESTDIR)$(autofslibdir) \ +- $(DESTDIR)$(pipepath)/private \ +- $(SSSD_USER_DIRS) \ + $(NULL); + @SSSD_USER_TRUE@ -chown $(SSSD_USER):$(SSSD_USER) $(SSSD_USER_DIRS) + @SSSD_USER_TRUE@ -chown $(SSSD_USER) $(DESTDIR)$(pipepath)/private +- $(INSTALL) -d -m 0700 $(DESTDIR)$(dbpath) $(DESTDIR)$(logpath) \ +- $(DESTDIR)$(keytabdir) \ +- $(NULL) +- $(INSTALL) -d -m 0750 $(DESTDIR)$(pipepath)/private +- $(INSTALL) -d -m 0755 $(DESTDIR)$(mcpath) $(DESTDIR)$(pipepath) \ +- $(DESTDIR)$(pubconfpath) \ +- $(DESTDIR)$(pubconfpath)/krb5.include.d $(DESTDIR)$(gpocachepath) +- $(INSTALL) -d -m 0711 $(DESTDIR)$(sssdconfdir) \ +- $(DESTDIR)$(sssdconfdir)/conf.d \ +- $(DESTDIR)$(sssdconfdir)/pki +-@BUILD_SECRETS_TRUE@ $(MKDIR_P) $(DESTDIR)$(secdbpath) + + @HAVE_DOXYGEN_TRUE@docs: + @HAVE_DOXYGEN_TRUE@ $(DOXYGEN) src/doxy.config diff --git a/gnu/packages/patches/ttfautohint-source-date-epoch.patch b/gnu/packages/patches/ttfautohint-source-date-epoch.patch deleted file mode 100644 index e42fdbf6b0..0000000000 --- a/gnu/packages/patches/ttfautohint-source-date-epoch.patch +++ /dev/null @@ -1,70 +0,0 @@ -Honour an external definition of SOURCE_DATE_EPOCH when updating the embedded -modification date in TTF/TTC files. - ---- a/lib/tatime.c -+++ b/lib/tatime.c -@@ -15,6 +15,8 @@ - - #include <time.h> - #include <stdint.h> -+#include <errno.h> -+#include <limits.h> - - #include "ta.h" - -@@ -27,12 +29,51 @@ TA_get_current_time(FT_ULong* high, - { - /* there have been 24107 days between January 1st, 1904 (the epoch of */ - /* OpenType), and January 1st, 1970 (the epoch of the `time' function) */ -- TA_ULongLong seconds_to_1970 = 24107 * 24 * 60 * 60; -- TA_ULongLong seconds_to_today = seconds_to_1970 + (TA_ULongLong)time(NULL); -+ const TA_ULongLong seconds_to_1970 = 24107 * 24 * 60 * 60; -+ TA_ULongLong seconds_to_build; - -+ time_t now; -+ char *source_date_epoch, *endptr; -+ TA_ULongLong epoch; -+ source_date_epoch = getenv("SOURCE_DATE_EPOCH"); -+ if (source_date_epoch) { -+ errno = 0; -+ epoch = strtoull(source_date_epoch, &endptr, 10); -+ if ((errno == ERANGE && (epoch == ULLONG_MAX || epoch == 0)) -+ || (errno != 0 && epoch == 0)) { -+ fprintf(stderr, -+ "Environment variable $SOURCE_DATE_EPOCH: strtoull: %s\n", -+ strerror(errno)); -+ exit(EXIT_FAILURE); -+ } -+ if (endptr == source_date_epoch) { -+ fprintf(stderr, -+ "Environment variable $SOURCE_DATE_EPOCH: No digits were found: %s\n", -+ endptr); -+ exit(EXIT_FAILURE); -+ } -+ if (*endptr != '\0') { -+ fprintf(stderr, -+ "Environment variable $SOURCE_DATE_EPOCH: Trailing garbage: %s\n", -+ endptr); -+ exit(EXIT_FAILURE); -+ } -+ if (epoch > ULONG_MAX) { -+ fprintf(stderr, -+ "Environment variable $SOURCE_DATE_EPOCH: value must be smaller " -+ "than or equal to: %lu but was found to be: %llu \n", -+ ULONG_MAX, epoch); -+ exit(EXIT_FAILURE); -+ } -+ now = epoch; -+ } else { -+ now = time(NULL); -+ } - -- *high = (FT_ULong)(seconds_to_today >> 32); -- *low = (FT_ULong)seconds_to_today; -+ seconds_to_build = seconds_to_1970 + (TA_ULongLong)now; -+ -+ *high = (FT_ULong)(seconds_to_build >> 32); -+ *low = (FT_ULong)seconds_to_build; - } - - /* end of tatime.c */ diff --git a/gnu/packages/patches/vcflib-use-shared-libraries.patch b/gnu/packages/patches/vcflib-use-shared-libraries.patch new file mode 100644 index 0000000000..e198ec663c --- /dev/null +++ b/gnu/packages/patches/vcflib-use-shared-libraries.patch @@ -0,0 +1,135 @@ +This patch is a combination of many of the patches from Debian: +https://sources.debian.org/src/libvcflib/1.0.1+dfsg-3/debian/patches/ + +--- + Makefile | 63 +++++++++++--------------------------------------------- + 1 file changed, 12 insertions(+), 51 deletions(-) + +diff --git a/Makefile b/Makefile +index 6b13350..be85f22 100644 +--- a/Makefile ++++ b/Makefile +@@ -114,43 +114,25 @@ BIN_SOURCES = src/vcfecho.cpp \ + src/vcfnull2ref.cpp \ + src/vcfinfosummarize.cpp + +-# when we can figure out how to build on mac +-# src/vcfsom.cpp +- + #BINS = $(BIN_SOURCES:.cpp=) + BINS = $(addprefix $(BIN_DIR)/,$(notdir $(BIN_SOURCES:.cpp=))) + SHORTBINS = $(notdir $(BIN_SOURCES:.cpp=)) + +-TABIX = tabixpp/tabix.o +-FASTAHACK = fastahack/Fasta.o +-SMITHWATERMAN = smithwaterman/SmithWatermanGotoh.o +-REPEATS = smithwaterman/Repeats.o +-INDELALLELE = smithwaterman/IndelAllele.o +-DISORDER = smithwaterman/disorder.o +-LEFTALIGN = smithwaterman/LeftAlign.o +-FSOM = fsom/fsom.o + FILEVERCMP = filevercmp/filevercmp.o + +-# Work out how to find htslib +-# Use the one we ship in tabixpp unless told otherwise by the environment +-HTS_LIB ?= $(VCF_LIB_LOCAL)/tabixpp/htslib/libhts.a +-HTS_INCLUDES ?= -I$(VCF_LIB_LOCAL)/tabixpp/htslib +-HTS_LDFLAGS ?= -L$(VCF_LIB_LOCAL)/tabixpp/htslib -lhts -lbz2 -lm -lz -llzma -pthread +- +- +-INCLUDES = $(HTS_INCLUDES) -I$(INC_DIR) +-LDFLAGS = -L$(LIB_DIR) -lvcflib $(HTS_LDFLAGS) -lpthread -lz -lm -llzma -lbz2 ++INCLUDES = -I$(INC_DIR) $(shell pkg-config --cflags htslib fastahack smithwaterman tabixpp) ++LDFLAGS = -L$(LIB_DIR) -lvcflib -lpthread -lz -lstdc++ -lm -llzma -lbz2 $(shell pkg-config --libs htslib fastahack smithwaterman tabixpp) + + + +-all: $(OBJECTS) $(BINS) scriptToBin ++all: $(OBJECTS) $(BINS) scriptToBin libvcflib.a + + scriptToBin: $(BINS) + $(CP) scripts/* $(BIN_DIR) + + GIT_VERSION += $(shell git describe --abbrev=4 --dirty --always) + +-CXXFLAGS = -Ofast -D_FILE_OFFSET_BITS=64 -std=c++0x ++CXXFLAGS = -Ofast -D_FILE_OFFSET_BITS=64 -std=c++0x -fPIC + #CXXFLAGS = -O2 + #CXXFLAGS = -pedantic -Wall -Wshadow -Wpointer-arith -Wcast-qual + +@@ -168,7 +150,7 @@ profiling: + gprof: + $(MAKE) CXXFLAGS="$(CXXFLAGS) -pg" all + +-$(OBJECTS): $(SOURCES) $(HEADERS) $(TABIX) multichoose pre $(SMITHWATERMAN) $(FILEVERCMP) $(FASTAHACK) ++$(OBJECTS): $(SOURCES) $(HEADERS) multichoose pre $(FILEVERCMP) + $(CXX) -c -o $@ src/$(*F).cpp $(INCLUDES) $(LDFLAGS) $(CXXFLAGS) && $(CP) src/*.h* $(VCF_LIB_LOCAL)/$(INC_DIR)/ + + multichoose: pre +@@ -177,39 +159,22 @@ multichoose: pre + intervaltree: pre + cd intervaltree && $(MAKE) && $(CP) *.h* $(VCF_LIB_LOCAL)/$(INC_DIR)/ + +-$(TABIX): pre +- cd tabixpp && INCLUDES="$(HTS_INCLUDES)" LIBPATH="-L. $(HTS_LDFLAGS)" HTSLIB="$(HTS_LIB)" $(MAKE) && $(CP) *.h* $(VCF_LIB_LOCAL)/$(INC_DIR)/ +- +-$(SMITHWATERMAN): pre +- cd smithwaterman && $(MAKE) && $(CP) *.h* $(VCF_LIB_LOCAL)/$(INC_DIR)/ && $(CP) *.o $(VCF_LIB_LOCAL)/$(OBJ_DIR)/ +- +-$(DISORDER): $(SMITHWATERMAN) +- +-$(REPEATS): $(SMITHWATERMAN) +- +-$(LEFTALIGN): $(SMITHWATERMAN) +- +-$(INDELALLELE): $(SMITHWATERMAN) +- +-$(FASTAHACK): pre +- cd fastahack && $(MAKE) && $(CP) *.h* $(VCF_LIB_LOCAL)/$(INC_DIR)/ && $(CP) Fasta.o $(VCF_LIB_LOCAL)/$(OBJ_DIR)/ +- +-#$(FSOM): +-# cd fsom && $(CXX) $(CXXFLAGS) -c fsom.c -lm +- + $(FILEVERCMP): pre + cd filevercmp && make && $(CP) *.h* $(VCF_LIB_LOCAL)/$(INC_DIR)/ && $(CP) *.o $(VCF_LIB_LOCAL)/$(INC_DIR)/ + + $(SHORTBINS): pre + $(MAKE) $(BIN_DIR)/$@ + +-$(BINS): $(BIN_SOURCES) libvcflib.a $(OBJECTS) $(SMITHWATERMAN) $(FASTAHACK) $(DISORDER) $(LEFTALIGN) $(INDELALLELE) $(SSW) $(FILEVERCMP) pre intervaltree ++$(BINS): $(BIN_SOURCES) libvcflib.so $(OBJECTS) $(SSW) $(FILEVERCMP) pre intervaltree + $(CXX) src/$(notdir $@).cpp -o $@ $(INCLUDES) $(LDFLAGS) $(CXXFLAGS) -DVERSION=\"$(GIT_VERSION)\" + +-libvcflib.a: $(OBJECTS) $(SMITHWATERMAN) $(REPEATS) $(FASTAHACK) $(DISORDER) $(LEFTALIGN) $(INDELALLELE) $(SSW) $(FILEVERCMP) $(TABIX) pre +- ar rs libvcflib.a $(OBJECTS) smithwaterman/sw.o $(FASTAHACK) $(SSW) $(FILEVERCMP) $(TABIX) ++libvcflib.a: $(OBJECTS) $(SSW) $(FILEVERCMP) pre ++ ar rs libvcflib.a $(OBJECTS) $(SSW) $(FILEVERCMP) + $(CP) libvcflib.a $(LIB_DIR) + ++libvcflib.so: $(OBJECTS) $(SSW) $(FILEVERCMP) pre ++ $(CXX) -shared -o libvcflib.so $(OBJECTS) $(SSW) $(FILEVERCMP) ++ $(CP) libvcflib.so $(LIB_DIR) + + test: $(BINS) + @prove -Itests/lib -w tests/*.t +@@ -230,16 +195,12 @@ clean: + $(RM) $(BINS) $(OBJECTS) + $(RM) ssw_cpp.o ssw.o + $(RM) libvcflib.a ++ $(RM) libvcflib.so + $(RM) -r $(BIN_DIR) + $(RM) -r $(LIB_DIR) + $(RM) -r $(INC_DIR) + $(RM) -r $(OBJ_DIR) +- $(MAKE) clean -C tabixpp +- $(MAKE) clean -C smithwaterman +- $(MAKE) clean -C fastahack + $(MAKE) clean -C multichoose +- $(MAKE) clean -C fsom +- $(MAKE) clean -C libVCFH + $(MAKE) clean -C test + $(MAKE) clean -C filevercmp + $(MAKE) clean -C intervaltree +-- +2.28.0 + diff --git a/gnu/packages/patches/wgetpaste-update-bpaste.patch b/gnu/packages/patches/wgetpaste-update-bpaste.patch new file mode 100644 index 0000000000..f92a0c17ed --- /dev/null +++ b/gnu/packages/patches/wgetpaste-update-bpaste.patch @@ -0,0 +1,27 @@ +From: Tobias Geerinckx-Rice <me@tobias.gr> +Date: Tue, 01 Sep 2020 04:23:25 +0200 +Subject: [PATCH] Update bpaste URL & regular expressions. + +diff -Naur wgetpaste-2.30/wgetpaste wgetpaste-2.30a/wgetpaste +--- wgetpaste-2.30/wgetpaste 2020-07-31 23:56:05.000000000 +0200 ++++ wgetpaste-2.30a/wgetpaste 2020-09-01 04:22:37.499898403 +0200 +@@ -16,7 +16,7 @@ + SERVICES="codepad bpaste dpaste gists snippets" + # bpaste + ENGINE_bpaste=pinnwand +-URL_bpaste="https://bpaste.net/" ++URL_bpaste="https://bpa.st/" + DEFAULT_EXPIRATION_bpaste="1week" + DEFAULT_LANGUAGE_bpaste="text" + # codepad +@@ -194,8 +194,8 @@ + xml+velocity xml xquery xslt xtend yaml" + EXPIRATIONS_pinnwand="1day 1week 1month never" + POST_pinnwand="submit=Paste! % % lexer expiry % code" +-REGEX_LOC_pinnwand="\(/show/[^ ]*\).*$|https://bpaste.net\1" +-REGEX_RAW_pinnwand='s|^\(https\?://[^/]*/\)show\(/[^ ]*/\?\)$|\1raw\2|' ++REGEX_LOC_pinnwand="\(/[^ ]*\).*$|https://bpa.st\1" ++REGEX_RAW_pinnwand='s|^\(https\?://[^/]*\)\(/[^ ]*/\?\)$|\1/raw\2|' + + ### errors + die() { diff --git a/gnu/packages/patches/xf86-video-sis-xorg-compat.patch b/gnu/packages/patches/xf86-video-sis-xorg-compat.patch deleted file mode 100644 index ebe9715d13..0000000000 --- a/gnu/packages/patches/xf86-video-sis-xorg-compat.patch +++ /dev/null @@ -1,18 +0,0 @@ -Remove use of interface no longer provided by xorg-server. - -Patch taken from upstream: -https://cgit.freedesktop.org/xorg/driver/xf86-video-sis/commit/?id=4b1356a2b7fd06e9a05d134caa4033681c939737 - -diff --git a/src/sis_driver.c b/src/sis_driver.c -index 8f06164..513f68b 100644 ---- a/src/sis_driver.c -+++ b/src/sis_driver.c -@@ -2738,7 +2738,7 @@ SiSPrintModes(ScrnInfoPtr pScrn) - float hsync, refresh = 0.0; - char *desc, *desc2, *prefix, *uprefix, *output; - -- xf86DrvMsg(pScrn->scrnIndex, pScrn->virtualFrom, "Virtual size is %dx%d " -+ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Virtual size is %dx%d " - "(pitch %d)\n", pScrn->virtualX, pScrn->virtualY, - pScrn->displayWidth); - diff --git a/gnu/packages/patches/xmonad-dynamic-linking.patch b/gnu/packages/patches/xmonad-dynamic-linking.patch new file mode 100644 index 0000000000..4f3386e53a --- /dev/null +++ b/gnu/packages/patches/xmonad-dynamic-linking.patch @@ -0,0 +1,16 @@ +This patch is required for xmonad to make use of shared libraries. +Without it, xmonad will not work since we do not (by default) use +statically linked Haskell libraries. + +diff -ruN xmonad-0.15-a/src/XMonad/Core.hs xmonad-0.15-b/src/XMonad/Core.hs +--- xmonad-0.15-a/src/XMonad/Core.hs 1969-12-31 19:00:00.000000000 -0500 ++++ xmonad-0.15-b/src/XMonad/Core.hs 1969-12-31 19:00:00.000000000 -0500 +@@ -681,6 +681,8 @@ + compileGHC bin dir errHandle = + runProcess "ghc" ["--make" + , "xmonad.hs" ++ , "-dynamic" ++ , "-fPIC" + , "-i" + , "-ilib" + , "-fforce-recomp" diff --git a/gnu/packages/patches/xorg-server-CVE-2020-14347.patch b/gnu/packages/patches/xorg-server-CVE-2020-14347.patch deleted file mode 100644 index c54b93d764..0000000000 --- a/gnu/packages/patches/xorg-server-CVE-2020-14347.patch +++ /dev/null @@ -1,33 +0,0 @@ -From aac28e162e5108510065ad4c323affd6deffd816 Mon Sep 17 00:00:00 2001 -From: Matthieu Herrb <matthieu@herrb.eu> -Date: Sat, 25 Jul 2020 19:33:23 +0200 -Subject: [PATCH] fix for ZDI-11426 - -Avoid leaking un-initalized memory to clients by zeroing the -whole pixmap on initial allocation. - -This vulnerability was discovered by: -Jan-Niklas Sohn working with Trend Micro Zero Day Initiative - -Signed-off-by: Matthieu Herrb <matthieu@herrb.eu> -Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com> ---- - dix/pixmap.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/dix/pixmap.c b/dix/pixmap.c -index 1186d7dbb..5a0146bbb 100644 ---- a/dix/pixmap.c -+++ b/dix/pixmap.c -@@ -116,7 +116,7 @@ AllocatePixmap(ScreenPtr pScreen, int pixDataSize) - if (pScreen->totalPixmapSize > ((size_t) - 1) - pixDataSize) - return NullPixmap; - -- pPixmap = malloc(pScreen->totalPixmapSize + pixDataSize); -+ pPixmap = calloc(1, pScreen->totalPixmapSize + pixDataSize); - if (!pPixmap) - return NullPixmap; - --- -2.27.0 - diff --git a/gnu/packages/pdf.scm b/gnu/packages/pdf.scm index 7649bff695..4c11111323 100644 --- a/gnu/packages/pdf.scm +++ b/gnu/packages/pdf.scm @@ -848,6 +848,14 @@ using a stylus.") (for-each (lambda (po) (chmod po #o666)) (find-files "." "\\.po$")) #t)) + ;; Fix path to addr2line utility, which the crash reporter uses. + (add-after 'unpack 'fix-paths + (lambda* (#:key inputs #:allow-other-keys) + (substitute* "src/util/Stacktrace.cpp" + ;; Match only the commandline. + (("\"addr2line ") + (string-append "\"" (which "addr2line") " "))) + #t)) (add-after 'install 'glib-or-gtk-wrap (assoc-ref glib-or-gtk:%standard-phases 'glib-or-gtk-wrap))))) (native-inputs diff --git a/gnu/packages/perl-compression.scm b/gnu/packages/perl-compression.scm index 3303fe1645..da7c09b640 100644 --- a/gnu/packages/perl-compression.scm +++ b/gnu/packages/perl-compression.scm @@ -69,14 +69,14 @@ is available in this module.") (define-public perl-compress-raw-bzip2 (package (name "perl-compress-raw-bzip2") - (version "2.095") + (version "2.096") (source (origin (method url-fetch) (uri (string-append "mirror://cpan/authors/id/P/PM/PMQS/" "Compress-Raw-Bzip2-" version ".tar.gz")) (sha256 - (base32 "1n72lr35axc9hhxxf9ss6b576s1fn8vab6dcsmbbb7h234j5hzg5")))) + (base32 "1glcjnbqksaviwyrprh9i4dybsb12kzfy0bx932l0xya9riyfr55")))) (build-system perl-build-system) ;; TODO: Use our bzip2 package. (home-page "https://metacpan.org/release/Compress-Raw-Bzip2") @@ -88,14 +88,14 @@ compression library.") (define-public perl-compress-raw-zlib (package (name "perl-compress-raw-zlib") - (version "2.095") + (version "2.096") (source (origin (method url-fetch) (uri (string-append "mirror://cpan/authors/id/P/PM/PMQS/" "Compress-Raw-Zlib-" version ".tar.gz")) (sha256 - (base32 "1ci1mp361cjkky2s30ganzvxcjj93rqjf26mli786wyicwr6ab5s")))) + (base32 "04jrqvqsa2c655idw7skv5rhb9vx9997h4n9if5p99srq4hblk6d")))) (build-system perl-build-system) (inputs `(("zlib" ,zlib))) @@ -123,14 +123,14 @@ compression library.") (define-public perl-io-compress (package (name "perl-io-compress") - (version "2.095") + (version "2.096") (source (origin (method url-fetch) (uri (string-append "mirror://cpan/authors/id/P/PM/PMQS/" "IO-Compress-" version ".tar.gz")) (sha256 - (base32 "14spyqv7x608kvi7wsj4pw68dxwnjlh0aqff5b5iw7wg5v569q4h")))) + (base32 "0wm51dib74l9baqfkfm0ixsr4cqwrgij2yc45xfhnjabvzary8cx")))) (build-system perl-build-system) (propagated-inputs ;; These two packages should be updated to this one's version first. @@ -170,14 +170,14 @@ in the format used by the @command{gzip} program.") (define-public perl-archive-extract (package (name "perl-archive-extract") - (version "0.82") + (version "0.86") (source (origin (method url-fetch) (uri (string-append "mirror://cpan/authors/id/B/BI/BINGOS/Archive-Extract-" version ".tar.gz")) (sha256 - (base32 "00zq2ishxk70192sjl1wciq14vhb9isz8rcafcy1j89va1srpvrn")))) + (base32 "11xnmb21835hysdk2mcq6ndch0136j03n2i111nhpkz8p36hkkcs")))) (build-system perl-build-system) (home-page "https://metacpan.org/release/Archive-Extract") (synopsis "Generic archive extracting mechanism") diff --git a/gnu/packages/perl.scm b/gnu/packages/perl.scm index 41c6da67d4..bd6e746b67 100644 --- a/gnu/packages/perl.scm +++ b/gnu/packages/perl.scm @@ -5023,16 +5023,19 @@ relic support.") (define-public perl-hash-merge (package (name "perl-hash-merge") - (version "0.300") + (version "0.302") (source (origin (method url-fetch) - (uri (string-append "mirror://cpan/authors/id/R/RE/REHSACK/" + (uri (string-append "mirror://cpan/authors/id/H/HE/HERMES/" "Hash-Merge-" version ".tar.gz")) (sha256 - (base32 - "0h3wfnpv5d4d3f9xzmwkchay6251nhzngdv3f6xia56mj4hxabs0")))) + (base32 "0i46agids6pk445gfck80f8z7q3pjvkp0ip1vmhqnq1rcpvj41df")))) (build-system perl-build-system) + (native-inputs + ;; For tests only. + `(("perl-clone" ,perl-clone) + ("perl-clone-pp" ,perl-clone-pp))) (propagated-inputs `(("perl-clone-choose" ,perl-clone-choose))) (home-page "https://metacpan.org/release/Hash-Merge") @@ -8226,7 +8229,7 @@ with file paths.") (define-public perl-pdf-api2 (package (name "perl-pdf-api2") - (version "2.036") + (version "2.038") (source (origin (method url-fetch) (uri (string-append @@ -8234,7 +8237,7 @@ with file paths.") version ".tar.gz")) (sha256 (base32 - "0x0pa75wpb87pcshl92y5nh8pzikjp46ljlr2pqvdgpqzvll8107")))) + "02dxz798sx0ncdphjrfvfl2a3c1lkplyriyk4psq99q2kdsc8ivl")))) (build-system perl-build-system) (native-inputs `(("perl-test-exception" ,perl-test-exception) @@ -9738,14 +9741,14 @@ can combine fields into a CSV string and parse a CSV string into fields.") (define-public perl-text-csv-xs (package (name "perl-text-csv-xs") - (version "1.43") + (version "1.44") (source (origin (method url-fetch) (uri (string-append "mirror://cpan/authors/id/H/HM/HMBRAND/" "Text-CSV_XS-" version ".tgz")) (sha256 - (base32 "1frh8awr5ipry21x4403wdkbglpl707n69smksg8sf79ia75756d")))) + (base32 "1i4viyf61lzss474ndnmqhdqlhksn9hcxhjbqhv4frg2m3f2v0f4")))) (build-system perl-build-system) (home-page "https://metacpan.org/release/Text-CSV_XS") (synopsis "Routines for manipulating CSV files") @@ -10227,7 +10230,7 @@ duration strings like \"2 minutes\" and \"3 seconds\" to seconds.") (define-public perl-time-hires (package (name "perl-time-hires") - (version "1.9760") + (version "1.9764") (source (origin (method url-fetch) (uri (string-append @@ -10235,10 +10238,10 @@ duration strings like \"2 minutes\" and \"3 seconds\" to seconds.") version ".tar.gz")) (sha256 (base32 - "0avh25m5ffsqc2xnfczvlnlbfbisw5wjq9d3w0j01h9byjzrif1c")))) + "1cfp078spid9z5g7xiswkpkjbkh4mkjvarz25wgwvdxzhxavwhcq")))) (build-system perl-build-system) (home-page "https://metacpan.org/release/Time-HiRes") - (synopsis "High resolution alarm, sleep, gettimeofday, interval timers") + (synopsis "High-resolution alarm, sleep, gettimeofday, and interval timers") (description "This package implements @code{usleep}, @code{ualarm}, and @code{gettimeofday} for Perl, as well as wrappers to implement @code{time}, @code{sleep}, and @code{alarm} that know about non-integral seconds.") diff --git a/gnu/packages/phabricator.scm b/gnu/packages/phabricator.scm index e4a4f79942..af95cd93d2 100644 --- a/gnu/packages/phabricator.scm +++ b/gnu/packages/phabricator.scm @@ -1,5 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2018 Robin Templeton <robin@igalia.com> +;;; Copyright © 2020 Efraim Flashner <efraim@flashner.co.il> ;;; ;;; This file is part of GNU Guix. ;;; @@ -24,48 +25,9 @@ #:use-module ((guix licenses) #:prefix license:) #:use-module (guix packages)) -(define-public libphutil - (let ((commit "b29d76e1709ef018cc5edc7c03033fd9fdebc578") - (revision "1")) - (package - (name "libphutil") - (version (git-version "0.0.0" revision commit)) - (source (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/phacility/libphutil") - (commit commit))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "06j84721r9r8624fmil62b5crs2qs0v6rr3cvv2zvkvwhxwrwv1l")))) - (build-system gnu-build-system) - ;; TODO: Unbundle jsonlint and porter-stemmer. - (arguments - '(#:tests? #f - #:phases - (modify-phases %standard-phases - (delete 'configure) - (delete 'build) - (replace 'install - (lambda _ - (let ((lib (string-append %output "/lib/libphutil"))) - (mkdir-p lib) - (copy-recursively "." lib)) - #t))))) - (inputs - `(("php" ,php))) - (home-page "https://github.com/phacility/libphutil") - (synopsis "PHP utility library") - (description - "@code{libphutil} is a collection of utility classes and functions for -PHP.") - ;; Bundled libraries are expat-licensed. - (license (list license:asl2.0 license:expat))))) - (define-public arcanist - (let ((commit "45a8d22c74a62624e69f5cd6ce901c9ab2658904") - (revision "1")) + (let ((commit "ceb082ef6b2919d76a90d4a53ca84f5b1e0c2c06") + (revision "2")) (package (name "arcanist") (version (git-version "0.0.0" revision commit)) @@ -77,8 +39,9 @@ PHP.") (file-name (git-file-name name version)) (sha256 (base32 - "13vswhqy9sap6841y93j4mj71dl27vhcivcn3rzyi0cchkhg2ac9")))) + "16590nywh3cpm2yq4igw3nfa8g84kwza215mrnqr2k6b2cqzjak3")))) (build-system gnu-build-system) + ;; TODO: Unbundle jsonlint (arguments '(#:tests? #f #:phases @@ -86,22 +49,20 @@ PHP.") (delete 'configure) (delete 'build) (replace 'install - (lambda _ - (let ((bin (string-append %output "/bin")) - (lib (string-append %output "/lib/arcanist"))) + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (bin (string-append out "/bin")) + (lib (string-append out "/lib/arcanist"))) (mkdir-p lib) (copy-recursively "." lib) (mkdir-p bin) (symlink (string-append lib "/bin/arc") (string-append bin "/arc")) (wrap-program (string-append bin "/arc") - `("ARC_PHUTIL_PATH" = - (,(string-append (assoc-ref %build-inputs "libphutil") - "/lib/libphutil"))) `("PATH" ":" prefix (,@(map (lambda (i) (string-append (assoc-ref %build-inputs i) "/bin")) - '("git" "mercurial" "subversion")))))) + '("php" "git" "mercurial" "subversion")))))) #t)) (add-before 'reset-gzip-timestamps 'make-compressed-files-writable (lambda _ @@ -110,7 +71,6 @@ PHP.") #t))))) (inputs `(("php" ,php) - ("libphutil" ,libphutil) ("git" ,git) ("mercurial" ,mercurial) ("subversion" ,subversion))) @@ -121,4 +81,8 @@ PHP.") development service. It allows you to interact with Phabricator installs to send code for review, download patches, transfer files, view status, make API calls, and various other things.") - (license license:asl2.0)))) + ;; Bundled libraries are expat-licensed. + (license (list license:asl2.0 license:expat))))) + +(define-public libphutil + (deprecated-package "libphutil" arcanist)) diff --git a/gnu/packages/photo.scm b/gnu/packages/photo.scm index 4a077cf8d4..5f97d7e214 100644 --- a/gnu/packages/photo.scm +++ b/gnu/packages/photo.scm @@ -467,7 +467,7 @@ photographic equipment.") (define-public darktable (package (name "darktable") - (version "3.0.2") + (version "3.2.1") (source (origin (method url-fetch) @@ -475,7 +475,7 @@ photographic equipment.") "https://github.com/darktable-org/darktable/releases/" "download/release-" version "/darktable-" version ".tar.xz")) (sha256 - (base32 "1yrnkw8c47kmy2x6m1xp69hwyk02xyc8pd9kvcmyj54lzrhzdfka")))) + (base32 "035rvqmw386hm0jpi14lf4dnpr5rjkalzjkyprqh42nwi3m86dkf")))) (build-system cmake-build-system) (arguments `(#:tests? #f ; there are no tests @@ -484,6 +484,8 @@ photographic equipment.") (modify-phases %standard-phases (add-before 'configure 'prepare-build-environment (lambda* (#:key inputs #:allow-other-keys) + ;; Rawspeed fails to build with GCC due to OpenMP error: + ;; "undefined reference to `GOMP_loop_nonmonotonic_dynamic_next'" (setenv "CC" "clang") (setenv "CXX" "clang++") ;; Darktable looks for opencl-c.h in the LLVM dir. Guix installs ;; it to the Clang dir. We fix this by patching CMakeLists.txt. @@ -503,15 +505,19 @@ photographic equipment.") (string-append (assoc-ref inputs "ilmbase") "/include/OpenEXR:" (or (getenv "CPATH") ""))) #t)) - (add-after 'install 'wrap-program - (lambda* (#:key inputs outputs #:allow-other-keys) - (wrap-program (string-append (assoc-ref outputs "out") - "/bin/darktable") - ;; For GtkFileChooserDialog. - `("GSETTINGS_SCHEMA_DIR" = - (,(string-append (assoc-ref inputs "gtk+") - "/share/glib-2.0/schemas")))) - #t))))) + (add-after 'install 'wrap-program + (lambda* (#:key inputs outputs #:allow-other-keys) + (wrap-program (string-append (assoc-ref outputs "out") + "/bin/darktable") + ;; For GtkFileChooserDialog. + `("GSETTINGS_SCHEMA_DIR" = + (,(string-append (assoc-ref inputs "gtk+") + "/share/glib-2.0/schemas"))) + ;; For libOpenCL.so. + `("LD_LIBRARY_PATH" = + (,(string-append (assoc-ref inputs "ocl-icd") + "/lib")))) + #t))))) (native-inputs `(("clang" ,clang-9) ("desktop-file-utils" ,desktop-file-utils) @@ -525,36 +531,38 @@ photographic equipment.") ("po4a" ,po4a))) (inputs `(("cairo" ,cairo) - ("colord-gtk" ,colord-gtk) - ("cups" ,cups) + ("colord-gtk" ,colord-gtk) ;optional, for color profile support + ("cups" ,cups) ;optional, for printing support ("curl" ,curl) ("dbus-glib" ,dbus-glib) ("exiv2" ,exiv2) ("freeimage" ,freeimage) - ("gmic" ,gmic) + ("gmic" ,gmic) ;optional, for HaldcLUT support ("graphicsmagick" ,graphicsmagick) ("gsettings-desktop-schemas" ,gsettings-desktop-schemas) ("gtk+" ,gtk+) ("ilmbase" ,ilmbase) - ("iso-codes" ,iso-codes) + ("iso-codes" ,iso-codes) ;optional, for language names in the preferences ("json-glib" ,json-glib) ("lcms" ,lcms) - ("lensfun" ,lensfun) - ("libgphoto2" ,libgphoto2) + ("lensfun" ,lensfun) ;optional, for the lens distortion plugin + ("libgphoto2" ,libgphoto2) ;optional, for camera tethering + ("libavif" ,libavif) ;optional, for AVIF support ("libjpeg" ,libjpeg-turbo) ("libomp" ,libomp) ("libpng" ,libpng) ("librsvg" ,librsvg) - ("libsecret" ,libsecret) + ("libsecret" ,libsecret) ;optional, for storing passwords ("libsoup" ,libsoup) ("libtiff" ,libtiff) - ("libwebp" ,libwebp) + ("libwebp" ,libwebp) ;optional, for WebP support ("libxml2" ,libxml2) ("libxslt" ,libxslt) - ("lua" ,lua) ;for plugins - ("openexr" ,openexr) - ("openjpeg" ,openjpeg) - ("osm-gps-map" ,osm-gps-map) + ("lua" ,lua) ;optional, for plugins + ("ocl-icd" ,ocl-icd) ;optional, for OpenCL support + ("openexr" ,openexr) ;optional, for EXR import/export + ("openjpeg" ,openjpeg) ;optional, for JPEG2000 export + ("osm-gps-map" ,osm-gps-map) ;optional, for geotagging view ("pugixml" ,pugixml) ("python-jsonschema" ,python-jsonschema) ("sqlite" ,sqlite))) @@ -565,7 +573,7 @@ developer. It manages your digital negatives in a database, lets you view them through a zoomable lighttable and enables you to develop raw images and enhance them.") ;; See src/is_supported_platform.h for supported platforms. - (supported-systems '("i686-linux" "x86_64-linux" "aarch64-linux")) + (supported-systems '("x86_64-linux" "aarch64-linux")) (license (list license:gpl3+ ;; Darktable itself. license:lgpl2.1+)))) ;; Rawspeed library. diff --git a/gnu/packages/php.scm b/gnu/packages/php.scm index 8297a6a315..18fc9f1b2c 100644 --- a/gnu/packages/php.scm +++ b/gnu/packages/php.scm @@ -60,7 +60,7 @@ (define-public php (package (name "php") - (version "7.4.9") + (version "7.4.10") (home-page "https://secure.php.net/") (source (origin (method url-fetch) @@ -68,7 +68,7 @@ "php-" version ".tar.xz")) (sha256 (base32 - "0yy5gms3yk24m6c5z4g0sqhcymzxqpmkh0fgrsyvxlcac153ywr3")) + "045h9zb0mw369n35gd4mp5yhwh62akp0s43vg255i122n400pnf2")) (modules '((guix build utils))) (snippet '(with-directory-excursion "ext" diff --git a/gnu/packages/piet.scm b/gnu/packages/piet.scm new file mode 100644 index 0000000000..5282290456 --- /dev/null +++ b/gnu/packages/piet.scm @@ -0,0 +1,70 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2020 Jesse Gibbons <jgibbons2357+guix@gmail.com> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu packages piet) + #:use-module (guix packages) + #:use-module (guix download) + #:use-module ((guix licenses) #:prefix license:) + #:use-module (guix build-system gnu) + #:use-module (gnu packages gd) + #:use-module (gnu packages groff) + #:use-module (gnu packages image) + #:use-module (gnu packages tcl)) + +(define-public npiet + (package + (name "npiet") + (version "1.3f") + (source (origin + (method url-fetch) + (uri (string-append "https://www.bertnase.de/npiet/npiet-" + version ".tar.gz")) + (sha256 + (base32 + "0nl59fhdqqr7nslxdirdn8nvlq5wws67c7jyx2ckbmxbc9h8bv9d")))) + (build-system gnu-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'install 'wrap-binaries + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (wrap-program (string-append out "/bin/npietedit") + `("PATH" ":" prefix (,(dirname (which "wish"))))) + #t)))))) + (inputs + `(("gd" ,gd) + ("giflib" ,giflib) + ("libpng" ,libpng) + ("tk" ,tk))) + (native-inputs `(("groff" ,groff))) + (synopsis "Piet interpreter") + (description + "Npiet is an interpreter for the piet programming language. Instead of +text, piet programs are pictures. Commands are determined based on changes in +color. + +This package includes: +@enumerate +@item npiet, a piet interpreter with debugging capabilities +@item npiet-foogol, a program that builds a piet program from foogol, an +algol-like language +@item npietedit, an editor for the piet programming language +@end enumerate") + (home-page "https://www.bertnase.de/npiet/") + (license license:gpl2+))) diff --git a/gnu/packages/pretty-print.scm b/gnu/packages/pretty-print.scm index 9f9a746844..eeae472f08 100644 --- a/gnu/packages/pretty-print.scm +++ b/gnu/packages/pretty-print.scm @@ -168,14 +168,14 @@ different programming languages.") (define-public fmt (package (name "fmt") - (version "6.2.1") + (version "7.0.3") (source (origin (method url-fetch) (uri (string-append "https://github.com/fmtlib/fmt/releases/download/" version "/fmt-" version ".zip")) (sha256 - (base32 "06l8g59frbsbwj15kg6x2bbn6p8yidh6wzsigdhbdjncvm1agzll")))) + (base32 "0kgajl3qsrdyj0csqsz8b8h84kasdy0pnh16byl0y1vlsaddzkyy")))) (build-system cmake-build-system) (arguments '(#:configure-flags '("-DBUILD_SHARED_LIBS=ON"))) @@ -247,14 +247,14 @@ seen in a terminal.") (define-public highlight (package (name "highlight") - (version "3.54") + (version "3.58") (source (origin (method url-fetch) (uri (string-append "http://www.andre-simon.de/zip/highlight-" version ".tar.bz2")) (sha256 - (base32 "1l6nxk3vwd7rkxpq9aqisjyps89r008wzn3abh4566q6jigahl4a")))) + (base32 "1y25vc3nysdih4y9z6yqn1k3i6lgkbyqkmdaib2xyfpqw4djb06z")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no tests diff --git a/gnu/packages/protobuf.scm b/gnu/packages/protobuf.scm index b8bd617eca..63450c7d10 100644 --- a/gnu/packages/protobuf.scm +++ b/gnu/packages/protobuf.scm @@ -32,11 +32,14 @@ #:use-module (guix build-system emacs) #:use-module (guix build-system ruby) #:use-module ((guix licenses) #:prefix license:) + #:use-module (guix utils) #:use-module (gnu packages compression) + #:use-module (gnu packages check) #:use-module (gnu packages gcc) #:use-module (gnu packages libevent) #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) + #:use-module (gnu packages python-check) #:use-module (gnu packages python-xyz) #:use-module (gnu packages ruby)) @@ -227,6 +230,59 @@ encoder in C++. The developer using protozero has to manually translate the mechanism for serializing structured data.") (license license:bsd-3))) +(define-public python-pure-protobuf + (package + (name "python-pure-protobuf") + (version "2.0.0") + (source + (origin + ;; pypi is broken; has no tests + (method git-fetch) + (uri (git-reference + (url "https://github.com/eigenein/protobuf") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "0lgs99dpfyckz6spib419sl7jpdk2g54pcw0yg59gdcsd1f5zqgz")))) + (build-system python-build-system) + (native-inputs + `(("python-flake8" ,python-flake8) + ("python-pytest" ,python-pytest) + ("python-pytest-cov" ,python-pytest-cov) + ("python-isort" ,python-isort))) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-before 'check 'setup-test-env + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (py3sitedir + (string-append out "/lib/python" + ,(version-major+minor + (package-version python)) + "/site-packages"))) + (setenv "PYTHONPATH" + (string-append py3sitedir ":" + (getenv "PYTHONPATH")))) + #t)) + (replace 'check + (lambda _ + (invoke "pytest" "--cov-report" "term-missing" "--cov" + "pure_protobuf") + (invoke "flake8" "pure_protobuf" "tests" + "--ignore=F541") + (invoke "isort" "-rc" "-c" "pure_protobuf" "tests") + #t))))) + (home-page "https://pypi.org/project/pure-protobuf/") + (synopsis "Protobuf implementation using dataclasses") + (description + "@code{python-pure-protobuf} allows to take advantage of the standard +dataclasses module to define message types. Protocol buffers are a +language-neutral, platform-neutral extensible mechanism for serializing +structured data.") + (license license:expat))) + (define-public python2-protobuf (package-with-python2 python-protobuf)) diff --git a/gnu/packages/pulseaudio.scm b/gnu/packages/pulseaudio.scm index 3757859d11..9522d023ad 100644 --- a/gnu/packages/pulseaudio.scm +++ b/gnu/packages/pulseaudio.scm @@ -538,7 +538,7 @@ The plugin is made to work with 1 or 2 channels (ladspa plugin), (define-public noisetorch (package (name "noisetorch") - (version "0.6.1-beta") + (version "0.7.2-beta") (source (origin (method git-fetch) @@ -547,7 +547,7 @@ The plugin is made to work with 1 or 2 channels (ladspa plugin), (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "1jmh7204mhlabdn0azfjrm3kb944j24n0w0cwibqrs9lfgdn8k52")))) + (base32 "06xlqjma8h7lcnqgc9226blps6m9dp487hk71lslfxj0jkay548k")))) (build-system go-build-system) (arguments `(#:import-path "github.com/lawl/NoiseTorch" @@ -572,6 +572,12 @@ The plugin is made to work with 1 or 2 channels (ladspa plugin), (lambda () (format #t "package main~%~%var version=~s~&" ,version)))) #t)) + (add-after 'unpack 'disable-update-check.go + (lambda _ + (with-directory-excursion "src/github.com/lawl/NoiseTorch" + (substitute* "main.go" + ((".*updateCheck.*") ""))) + #t)) (add-before 'build 'go-generate (lambda _ (with-directory-excursion "src/github.com/lawl/NoiseTorch" diff --git a/gnu/packages/python-check.scm b/gnu/packages/python-check.scm index d0bde27e13..c0de32b207 100644 --- a/gnu/packages/python-check.scm +++ b/gnu/packages/python-check.scm @@ -1,6 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2019 Ricardo Wurmus <rekado@elephly.net> -;;; Copyright © 2019 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2019, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2019 Maxim Cournoyer <maxim.cournoyer@gmail.com> ;;; Copyright © 2019 Hartmut Goebel <h.goebel@crazy-compilers.com> @@ -698,6 +698,49 @@ rounds that are calibrated to the chosen timer.") service processes for your tests with pytest.") (license license:expat))) +(define-public python-pytest-toolbox + (package + (name "python-pytest-toolbox") + (version "0.4") + (source + (origin + ;; No tests in the PyPI tarball. + (method git-fetch) + (uri (git-reference + (url "https://github.com/samuelcolvin/pytest-toolbox") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1wqkr3g5gmqdxmhzfsxbwy8pm3cadaj6a8cxq58w9bacly4hqbh0")))) + (build-system python-build-system) + (arguments + '(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda* (#:key inputs outputs #:allow-other-keys) + ;; Make the installed plugin discoverable by Pytest. + (add-installed-pythonpath inputs outputs) + (invoke "pytest" "-vv")))))) + (native-inputs + `(("python-coverage" ,python-coverage) + ("python-docutils" ,python-docutils) + ("python-flake8" ,python-flake8) + ("python-isort" ,python-isort) + ("python-pydantic" ,python-pydantic) + ("python-pyflakes" ,python-pyflakes) + ("python-pygments" ,python-pygments) + ("python-pytest" ,python-pytest) + ("python-pytest-cov" ,python-pytest-cov) + ("python-pytest-isort" ,python-pytest-isort) + ("python-pytest-mock" ,python-pytest-mock) + ("python-pytest-sugar" ,python-pytest-sugar))) + (home-page "https://github.com/samuelcolvin/pytest-toolbox") + (synopsis "Numerous useful plugins for Pytest") + (description + "Pytest Toolbox contains many useful plugins for Pytest. Among them are +new fixtures, new methods and new comparison objects.") + (license license:expat))) + (define-public python-pytest-aiohttp (package (name "python-pytest-aiohttp") @@ -722,13 +765,13 @@ service processes for your tests with pytest.") (define-public python-nbval (package (name "python-nbval") - (version "0.9.5") + (version "0.9.6") (source (origin (method url-fetch) (uri (pypi-uri "nbval" version)) (sha256 - (base32 "1xh2p7g5s5g06caaraf3dsz69bpj7dgw2h3ss67kci789aspnwp8")))) + (base32 "0h3xrnw0mj1srigrx2rfnd73h8s0xjycclmjs0vx7qkfyqpcvvyg")))) (build-system python-build-system) (arguments `(#:phases diff --git a/gnu/packages/python-crypto.scm b/gnu/packages/python-crypto.scm index 96837e3cde..22b1a1ebe3 100644 --- a/gnu/packages/python-crypto.scm +++ b/gnu/packages/python-crypto.scm @@ -8,7 +8,7 @@ ;;; Copyright © 2015 Cyril Roelandt <tipecaml@gmail.com> ;;; Copyright © 2014, 2017 Eric Bavier <bavier@member.fsf.org> ;;; Copyright © 2015, 2016 David Thompson <davet@gnu.org> -;;; Copyright © 2016, 2017, 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2016, 2017, 2018, 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2016, 2017 Nikita <nikita@n0.is> ;;; Copyright © 2014, 2015 Mark H Weaver <mhw@netris.org> ;;; Copyright © 2015, 2016, 2017, 2019 Ricardo Wurmus <rekado@elephly.net> @@ -64,6 +64,30 @@ #:use-module ((guix licenses) #:prefix license:) #:use-module (srfi srfi-1)) +(define-public python-potr + (package + (name "python-potr") + (version "1.0.2") + (source + (origin + (method git-fetch) + (uri + (git-reference + (url "https://github.com/python-otr/pure-python-otr.git") + (commit version))) + (file-name + (git-file-name name version)) + (sha256 + (base32 "1hzw6h01fm216nmipyylgz0zybd80w1xsk12m7djycnhqrnrvvv1")))) + (build-system python-build-system) + (propagated-inputs + `(("python-pycrypto" ,python-pycrypto))) + (synopsis "Python OTR Implementation") + (description "Python OTR is an Off-The-Record Protocol Implementation in +Python. It does not bind to libotr.") + (home-page "https://github.com/python-otr/pure-python-otr") + (license license:lgpl3+))) + (define-public python-base58 (package (name "python-base58") @@ -209,14 +233,13 @@ This package provides a Python interface for BLAKE2.") (define-public python-paramiko (package (name "python-paramiko") - (version "2.7.1") + (version "2.7.2") (source (origin (method url-fetch) (uri (pypi-uri "paramiko" version)) (sha256 - (base32 - "17wx8lkhqxmddfdq7z7x45xqq2w3gwa974hpq1n3y0dqbn4r414j")))) + (base32 "0dahwq623jnna7gsr9j0mkwr9k2n1pvkapjryhcx508d5jxg8dkz")))) (build-system python-build-system) (arguments `(;; FIXME: Tests require many unpackaged libraries, see dev-requirements.txt. @@ -1414,14 +1437,13 @@ certificates, signing and building trust bundles.") (define-public python-jeepney (package (name "python-jeepney") - (version "0.4.2") + (version "0.4.3") (source (origin (method url-fetch) (uri (pypi-uri "jeepney" version)) (sha256 - (base32 - "1fz9lb5fl831sijg2j0sbki698j2z6awbblas7mz3gp9jz2xi9hb")))) + (base32 "0vp3p1lqhqk2kd3254q5sxr50znmm2hmysc8a7g0fr1brihvhy9l")))) (build-system python-build-system) (native-inputs `(("python-testpath" ,python-testpath) diff --git a/gnu/packages/python-web.scm b/gnu/packages/python-web.scm index 1b97d1401d..7926539233 100644 --- a/gnu/packages/python-web.scm +++ b/gnu/packages/python-web.scm @@ -3,7 +3,7 @@ ;;; Copyright © 2015, 2016, 2017, 2018, 2019, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2017 Christopher Baines <mail@cbaines.net> ;;; Copyright © 2016, 2017 Danny Milosavljevic <dannym+a@scratchpost.org> -;;; Copyright © 2013, 2014, 2015, 2016 Andreas Enge <andreas@enge.fr> +;;; Copyright © 2013, 2014, 2015, 2016, 2020 Andreas Enge <andreas@enge.fr> ;;; Copyright © 2016, 2017, 2020 Marius Bakke <mbakke@fastmail.com> ;;; Copyright © 2015, 2016, 2017, 2018, 2019, 2020 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2017 Roel Janssen <roel@gnu.org> @@ -68,10 +68,12 @@ #:use-module (gnu packages databases) #:use-module (gnu packages django) #:use-module (gnu packages groff) + #:use-module (gnu packages libevent) #:use-module (gnu packages libffi) #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) #:use-module (gnu packages python-check) + #:use-module (gnu packages python-compression) #:use-module (gnu packages python-crypto) #:use-module (gnu packages python-xyz) #:use-module (gnu packages serialization) @@ -184,7 +186,7 @@ aiohttp. It supports SOCKS4(a) and SOCKS5.") (base32 "1snr5paql8dgvc676n8xq460wypjsb1xj53cf3px1s4wczf7lryq")))) (build-system python-build-system) - (inputs + (propagated-inputs `(("python-pycares" ,python-pycares))) (arguments `(#:tests? #f)) ;tests require internet access @@ -1856,6 +1858,27 @@ WebSocket usage in Python programs.") ,python2-backport-ssl-match-hostname) ,@(package-native-inputs base)))))) +(define-public python-purl + (package + (name "python-purl") + (version "1.5") + (source + (origin + (method url-fetch) + (uri (pypi-uri "purl" version)) + (sha256 + (base32 + "15ibnz1xrh5msmn04j0nr00sz4n7jwx6cwd6zlx99kkz3vpin53m")))) + (build-system python-build-system) + (propagated-inputs `(("python-six" ,python-six))) + (home-page + "https://github.com/codeinthehole/purl") + (synopsis + "Python package for URL manipulation") + (description + "Purl is a Python package for handling URLs.") + (license license:expat))) + (define-public python-requests (package (name "python-requests") @@ -1898,18 +1921,6 @@ than Python’s urllib2 library.") ("python-idna" ,python-idna-2.7) ,@(package-propagated-inputs python-requests))))) -;; Some software requires an older version of Requests, notably Docker -;; Compose. -(define-public python-requests-2.7 - (package (inherit python-requests) - (version "2.7.0") - (source (origin - (method url-fetch) - (uri (pypi-uri "requests" version)) - (sha256 - (base32 - "0gdr9dxm24amxpbyqpbh3lbwxc2i42hnqv50sigx568qssv3v2ir")))))) - (define-public python2-requests (package-with-python2 python-requests)) @@ -1940,14 +1951,14 @@ library.") (define-public python-requests-mock (package (name "python-requests-mock") - (version "1.3.0") + (version "1.8.0") (source (origin (method url-fetch) (uri (pypi-uri "requests-mock" version)) (sha256 (base32 - "0jr997dvk6zbmhvbpcv3rajrgag69mcsm1ai3w3rgk2jdh6rg1mx")))) + "09nj8fmyj7xz2mgwyvbw0fl9zybmx2d3qd2hf529vvjc9s24d3z6")))) (build-system python-build-system) (propagated-inputs `(("python-requests" ,python-requests) @@ -1958,9 +1969,10 @@ library.") ("python-docutils" ,python-docutils) ("python-fixtures" ,python-fixtures) ("python-mock" ,python-mock) + ("python-purl" ,python-purl) + ("python-pytest" ,python-pytest) ("python-sphinx" ,python-sphinx) - ("python-testrepository" ,python-testrepository) - ("python-testtools" ,python-testtools))) + ("python-testrepository" ,python-testrepository))) (home-page "https://requests-mock.readthedocs.org/") (synopsis "Mock out responses from the requests package") (description @@ -2003,6 +2015,20 @@ with python-requests.") (define-public python2-requests-toolbelt (package-with-python2 python-requests-toolbelt)) +(define-public python-requests-toolbelt-0.9.1 + (package + (inherit python-requests-toolbelt) + (version "0.9.1") + (source (origin + (method url-fetch) + (uri (pypi-uri "requests-toolbelt" version)) + (sha256 + (base32 + "1h3gm88dcjbd7gm229a7x5qkkhnsqsjz0m0l2xyavm2ab3a8k04n")))) + (arguments + `(;; FIXME: Some tests require network access. + #:tests? #f)))) + (define-public python-oauthlib (package (name "python-oauthlib") @@ -3863,6 +3889,43 @@ XPath and therefore does not have all the correctness corner cases that are hard or impossible to fix in cssselect.") (license license:bsd-3))) +(define-public python-uvloop + (package + (name "python-uvloop") + (version "0.14.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "uvloop" version)) + (sha256 + (base32 "07j678z9gf41j98w72ysrnb5sa41pl5yxd7ib17lcwfxqz0cjfhj")))) + (build-system python-build-system) + (arguments + '(#:tests? #f ;FIXME: tests hang and with some errors in the way + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'preparations + (lambda _ + ;; Use packaged libuv. + (substitute* "setup.py" (("self.use_system_libuv = False") + "self.use_system_libuv = True")) + #t))))) + (native-inputs + `(("python-aiohttp" ,python-aiohttp) + ("python-cython" ,python-cython) + ("python-flake8" ,python-flake8) + ("python-psutil" ,python-psutil) + ("python-pyopenssl" ,python-pyopenssl) + ("python-twine" ,python-twine))) + (inputs + `(("libuv" ,libuv))) + (home-page "https://github.com/MagicStack/uvloop") + (synopsis "Fast implementation of asyncio event loop on top of libuv") + (description + "@code{uvloop} is a fast, drop-in replacement of the built-in asyncio +event loop. It is implemented in Cython and uses libuv under the hood.") + (license license:expat))) + (define-public gunicorn (package (name "gunicorn") @@ -3933,6 +3996,104 @@ and fairly speedy.") (properties '((hidden? . #t))) (native-inputs `()))) +(define-public python-httptools + (package + (name "python-httptools") + (version "0.1.1") + (source + (origin + ;; PyPI tarball comes with a vendored http-parser and no tests. + (method git-fetch) + (uri (git-reference + (url "https://github.com/MagicStack/httptools") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0g08128x2ixsiwrzskxc6c8ymgzs39wbzr5mhy0mjk30q9pqqv77")))) + (build-system python-build-system) + (arguments + '(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'preparations + (lambda _ + ;; Skip a failing test (AssertionError). Bug report: + ;; https://github.com/MagicStack/httptools/issues/10. + (substitute* "tests/test_parser.py" + ((" def test_parser_response_1") + (string-append + " @unittest.skip(\"Disabled.\")\n" + " def test_parser_response_1"))) + ;; Use packaged http-parser. + (substitute* "setup.py" (("self.use_system_http_parser = False") + "self.use_system_http_parser = True")) + ;; This path is hardcoded. Hardcode our own. + (substitute* "httptools/parser/cparser.pxd" + (("../../vendor/http-parser") + (string-append (assoc-ref %build-inputs "http-parser") + "/include"))) + ;; Don't force Cython version. + (substitute* "setup.py" (("Cython==") "Cython>=")) + #t))))) + (native-inputs + `(("python-cython" ,python-cython) + ("python-pytest" ,python-pytest))) + (inputs + `(("http-parser" ,http-parser))) + (home-page "https://github.com/MagicStack/httptools") + (synopsis "Collection of framework independent HTTP protocol utils") + (description + "@code{httptools} is a Python binding for the nodejs HTTP parser.") + (license license:expat))) + +(define-public python-uvicorn + (package + (name "python-uvicorn") + (version "0.11.8") + (source + (origin + ;; PyPI tarball has no tests. + (method git-fetch) + (uri (git-reference + (url "https://github.com/encode/uvicorn") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 "00iidg5ysp7k00bw3kmkvr8mghnh4jdi0p2ryiarhryf8wz2r3fy")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda* (#:key inputs outputs tests? #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + (invoke "pytest" "-vv")))))) + (native-inputs + `(("python-black" ,python-black) + ("python-codecov" ,python-codecov) + ("python-flake8" ,python-flake8) + ("python-isort" ,python-isort) + ("python-mypy" ,python-mypy) + ("python-pytest" ,python-pytest) + ("python-pytest-cov" ,python-pytest-cov) + ("python-pytest-mock" ,python-pytest-mock) + ("python-requests" ,python-requests))) + (propagated-inputs + `(("python-click" ,python-click) + ("python-h11" ,python-h11) + ("python-httptools" ,python-httptools) + ("python-pyyaml" ,python-pyyaml) + ("python-uvloop" ,python-uvloop) + ("python-watchgod" ,python-watchgod) + ("python-websockets" ,python-websockets) + ("python-wsproto" ,python-wsproto))) + (home-page "https://github.com/encode/uvicorn") + (synopsis "Fast ASGI server implementation") + (description + "@code{uvicorn} is a fast ASGI server implementation, using @code{uvloop} +and @code{httptools}. It currently supports HTTP/1.1 and WebSockets. Support +for HTTP/2 is planned.") + (license license:bsd-3))) + (define-public python-translation-finder (package (name "python-translation-finder") @@ -4146,6 +4307,168 @@ and serve updated contents upon changes to the directory.") @acronym{TLS, Transport Layer Security} support.") (license license:bsd-2))) +(define-public python-httpcore + (package + (name "python-httpcore") + (version "0.10.2") + (source + (origin + ;; PyPI tarball does not contain tests. + (method git-fetch) + (uri (git-reference + (url "https://github.com/encode/httpcore") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 "00gn8nfv814rg6fj7xv97mrra3fvx6fzjcgx9y051ihm6hxljdsi")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'remove-unavailable-tests + (lambda _ + ;; These tests require 'mitmproxy' which is not packaged. + (for-each (lambda (f) + (delete-file f)) + '("tests/conftest.py" + "tests/sync_tests/test_interfaces.py" + "tests/async_tests/test_interfaces.py")) + #t)) + (add-after 'remove-unavailable-tests 'force-h11-version + ;; Allow build with h11 >= 0.10. + (lambda _ + (substitute* "setup.py" (("h11>=0.8,<0.10") "h11")) + #t)) + (replace 'check + (lambda* (#:key inputs outputs #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + (invoke "pytest" "-vv" "--cov=httpcore" + "--cov=tests" "tests")))))) + (native-inputs + `(;; ("mitmproxy" ,mitmproxy) ;; TODO: Package this. + ("python-autoflake" ,python-autoflake) + ("python-flake8" ,python-flake8) + ("python-flake8-bugbear" ,python-flake8-bugbear) + ("python-flake8-pie" ,python-flake8-pie) + ("python-isort" ,python-isort) + ("python-mypy" ,python-mypy) + ("python-pytest" ,python-pytest) + ("python-pytest-asyncio" ,python-pytest-asyncio) + ("python-pytest-cov" ,python-pytest-cov) + ("python-pytest-trio" ,python-pytest-trio) + ("python-uvicorn" ,python-uvicorn) + ("python-trustme" ,python-trustme))) + (propagated-inputs + `(("python-h11" ,python-h11) + ("python-h2" ,python-h2) + ("python-sniffio" ,python-sniffio) + ("python-trio" ,python-trio) + ("python-trio-typing" ,python-trio-typing))) + (home-page "https://github.com/encode/httpcore") + (synopsis "Minimal, low-level HTTP client") + (description + "HTTP Core provides a minimal and low-level HTTP client, which does one +thing only: send HTTP requests. + +Some things HTTP Core does do: + +@itemize +@item Sending HTTP requests. +@item Provides both sync and async interfaces. +@item Supports HTTP/1.1 and HTTP/2. +@item Async backend support for asyncio and trio. +@item Automatic connection pooling. +@item HTTP(S) proxy support. +@end itemize") + (license license:bsd-3))) + +(define-public python-httpx + (package + (name "python-httpx") + (version "0.14.3") + (source + (origin + ;; PyPI tarball does not contain tests. + (method git-fetch) + (uri (git-reference + (url "https://github.com/encode/httpx") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0mn8gqkgaij3s2pbwgrih20iq34f3f82dfvypaw3nnh7n63vna43")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda _ + (invoke "pytest" "-vv" "-k" + ;; This test tries to open an outgoing connection. + "not test_connect_timeout[asyncio]")))))) + (native-inputs + `(("python-autoflake" ,python-autoflake) + ("python-black" ,python-black) + ("python-cryptography" ,python-cryptography) + ("python-flake8" ,python-flake8) + ("python-flake8-bugbear" ,python-flake8-bugbear) + ("python-flake8-pie" ,python-flake8-pie) + ("python-isort" ,python-isort) + ("python-mypy" ,python-mypy) + ("python-pytest" ,python-pytest) + ("python-pytest-asyncio" ,python-pytest-asyncio) + ("python-pytest-trio" ,python-pytest-trio) + ("python-pytest-cov" ,python-pytest-cov) + ("python-trio" ,python-trio) + ("python-trio-typing" ,python-trio-typing) + ("python-trustme" ,python-trustme) + ("python-uvicorn" ,python-uvicorn))) + (propagated-inputs + `(("python-brotli" ,python-brotli) + ("python-certifi" ,python-certifi) + ("python-chardet" ,python-chardet) + ("python-httpcore" ,python-httpcore) + ("python-idna" ,python-idna) + ("python-rfc3986" ,python-rfc3986) + ("python-sniffio" ,python-sniffio))) + (home-page "https://github.com/encode/httpx") + (synopsis "HTTP client for Python") + (description + "HTTPX is a fully featured HTTP client for Python 3, which provides sync +and async APIs, and support for both HTTP/1.1 and HTTP/2. + +HTTPX builds on the well-established usability of requests, and gives you: + +@itemize +@item A broadly requests-compatible API. +@item Standard synchronous interface, but with async support if you need it. +@item HTTP/1.1 and HTTP/2 support. +@item Ability to make requests directly to WSGI applications or ASGI applications. +@item Strict timeouts everywhere. +@item Fully type annotated. +@item 99% test coverage. +@end itemize + +Plus all the standard features of requests: + +@itemize +@item International Domains and URLs +@item Keep-Alive & Connection Pooling +@item Sessions with Cookie Persistence +@item Browser-style SSL Verification +@item Basic/Digest Authentication +@item Elegant Key/Value Cookies +@item Automatic Decompression +@item Automatic Content Decoding +@item Unicode Response Bodies +@item Multipart File Uploads +@item HTTP(S) Proxy Support +@item Connection Timeouts +@item Streaming Downloads +@item .netrc Support +@item Chunked Requests +@end itemize") + (license license:bsd-3))) + (define-public python-websockets (package (name "python-websockets") @@ -4652,3 +4975,39 @@ using a pure Python implementation.") "This package provices a simple implementation of Encrypted Content Encoding for HTTP.") (license license:expat))) + +(define-public python-cloudscraper + (package + (name "python-cloudscraper") + (version "1.2.46") + (source + (origin + (method url-fetch) + (uri (pypi-uri "cloudscraper" version)) + (sha256 + (base32 + "1br4p648yassywsd7whz1c7s10rwdysnd7wdqfjq9bksqfxrac3r")) + (modules '((guix build utils))) + (snippet + '(with-directory-excursion "cloudscraper" + (for-each delete-file + '("captcha/2captcha.py" + "captcha/9kw.py" + "captcha/anticaptcha.py" + "captcha/deathbycaptcha.py" + "interpreters/js2py.py" + "interpreters/v8.py")) + #t)))) + (build-system python-build-system) + (propagated-inputs + `(("python-requests" ,python-requests) + ("python-requests-toolbelt" ,python-requests-toolbelt-0.9.1) + ("python-pyparsing" ,python-pyparsing-2.4.7))) + (native-inputs + `(("python-pytest" ,python-pytest))) + (home-page "https://github.com/venomous/cloudscraper") + (synopsis "Cloudflare anti-bot bypass") + (description + "This module acts as a webbrowser solving Cloudflare's Javascript +challenges.") + (license license:expat))) diff --git a/gnu/packages/python-xyz.scm b/gnu/packages/python-xyz.scm index 6ddd253ed9..3e66e5a7eb 100644 --- a/gnu/packages/python-xyz.scm +++ b/gnu/packages/python-xyz.scm @@ -123,6 +123,7 @@ #:use-module (gnu packages gl) #:use-module (gnu packages glib) #:use-module (gnu packages gnome) + #:use-module (gnu packages gnupg) #:use-module (gnu packages graphviz) #:use-module (gnu packages graphics) #:use-module (gnu packages gsasl) @@ -134,6 +135,7 @@ #:use-module (gnu packages kerberos) #:use-module (gnu packages libevent) #:use-module (gnu packages libffi) + #:use-module (gnu packages libidn) #:use-module (gnu packages linux) #:use-module (gnu packages llvm) #:use-module (gnu packages man) @@ -188,6 +190,52 @@ #:use-module (srfi srfi-1) #:use-module (srfi srfi-26)) +(define-public python-slixmpp + (package + (name "python-slixmpp") + (version "1.5.2") + (source + (origin + (method git-fetch) + (uri + (git-reference + (url "https://lab.louiz.org/poezio/slixmpp.git") + (commit + (string-append "slix-" version)))) + (file-name + (git-file-name name version)) + (sha256 + (base32 "15mqxcws14bjvh5jcfwl86zsvrymkdw3ya07vb44md7vfnsnclwx")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'patch + (lambda _ + (substitute* "setup.py" + (("'CC', 'cc'") + "'CC', 'gcc'")) + #t))))) + (native-inputs + `(("cython" ,python-cython) + ("gnupg" ,gnupg) + ("pkg-config" ,pkg-config))) + (propagated-inputs + `(("python-aiodns" ,python-aiodns) + ("python-aiohttp" ,python-aiohttp) + ("python-pyasn1" ,python-pyasn1) + ("python-pyasn1-modules" ,python-pyasn1-modules))) + (inputs + `(("libidn" ,libidn) + ("python" ,python))) ; We are building a Python extension. + (synopsis "XMPP library without threads") + (description "Slixmpp is a XMPP library for Python 3.7+. It is a fork of +SleekXMPP. Its goal is to only rewrite the core of the library (the low level +socket handling, the timers, the events dispatching) in order to remove all +threads.") + (home-page "https://lab.louiz.org/poezio/slixmpp") + (license license:expat))) + (define-public python-tenacity (package (name "python-tenacity") @@ -4654,6 +4702,17 @@ that client code uses to construct the grammar directly in Python code.") (define-public python2-pyparsing (package-with-python2 python-pyparsing)) +(define-public python-pyparsing-2.4.7 + (package + (inherit python-pyparsing) + (version "2.4.7") + (source + (origin + (method url-fetch) + (uri (pypi-uri "pyparsing" version)) + (sha256 + (base32 "1hgc8qrbq1ymxbwfbjghv01fm3fbpjwpjwi0bcailxxzhf3yq0y2")))))) + (define-public python-numpydoc (package (name "python-numpydoc") @@ -8170,6 +8229,48 @@ expressions after the entire file has been read. This enables support for first-class forward references that stub files use.") (license license:expat))) +(define-public python-flake8-pie + (package + (name "python-flake8-pie") + (version "0.5.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "flake8-pie" version)) + (sha256 + (base32 "0kgipl5gljlp7aa7ykx15pswpzkd0d0qiznihb2z0d9a73181dyd")))) + (build-system python-build-system) + (home-page "https://github.com/sbdchd/flake8-pie") + (synopsis "Flake8 extension that implements lints") + (description + "This package provides a flake8 extension that implements miscellaneous +lints.") + (license license:bsd-2))) + +(define-public python-autoflake + (package + (name "python-autoflake") + (version "1.3.1") + (source + (origin + (method url-fetch) + (uri (pypi-uri "autoflake" version)) + (sha256 + (base32 "0nzr057dbmgprp4a52ymafdkdd5zp2wcqf42913xc7hhvvdbj338")))) + (build-system python-build-system) + (propagated-inputs + `(("python-pyflakes" ,python-pyflakes))) + (home-page "https://github.com/myint/autoflake") + (synopsis "Removes unused imports and unused variables") + (description + "@code{autoflake} removes unused imports and unused variables from Python +code as reported by @code{pyflakes}. + +By default, it only removes unused imports for modules that are part of the +standard library. Removal of unused variables is also disabled by default. +It also removes useless @code{pass} statements.") + (license license:expat))) + (define-public python-mistune (package (name "python-mistune") @@ -9326,10 +9427,14 @@ Python's @code{ctypes} foreign function interface (FFI).") (native-inputs (if (%current-target-system) `(("self" ,this-package)) '())) - (synopsis "Python bindings to the libmagic file type guesser. Note that -this module and the python-magic module both provide a \"magic.py\" file; -these two modules, which are different and were developed separately, both -serve the same purpose: provide Python bindings for libmagic."))) + (synopsis "Python bindings to the libmagic file type guesser") + (description "This package provides Python bindings to the libmagic file +type guesser. + +Note that this module and the @code{python-magic} module both provide a +@file{magic.py} file; these two modules, which are different and were +developed separately, both serve the same purpose: provide Python bindings for +libmagic."))) (define-public python2-file (package-with-python2 python-file)) @@ -13057,14 +13162,13 @@ collections of data.") (define-public python-prompt-toolkit (package (name "python-prompt-toolkit") - (version "3.0.5") + (version "3.0.7") (source (origin (method url-fetch) (uri (pypi-uri "prompt_toolkit" version)) (sha256 - (base32 - "1j3x5s4gp4ih73sbcni0a0vffbzvrxbrbnkvb3fzjgxn810ilgan")))) + (base32 "12a4pyrpnm3vcrvx7lb4cglp220lbvi336mhn2k2nzcgy82lcbw2")))) (build-system python-build-system) (arguments `(#:phases @@ -13090,7 +13194,8 @@ interfaces in Python. It's like GNU Readline but it also features syntax highlighting while typing, out-of-the-box multi-line input editing, advanced code completion, incremental search, support for Chinese double-width characters, mouse support, and auto suggestions.") - (license license:bsd-3))) + (license license:bsd-3) + (properties `((python2-variant . ,(delay python-prompt-toolkit-2)))))) (define-public python-prompt-toolkit-2 (package (inherit python-prompt-toolkit) @@ -13106,7 +13211,8 @@ characters, mouse support, and auto suggestions.") (propagated-inputs `(("python-wcwidth" ,python-wcwidth) ("python-six" ,python-six) - ("python-pygments" ,python-pygments))))) + ("python-pygments" ,python-pygments))) + (properties '()))) (define-public python2-prompt-toolkit (package-with-python2 python-prompt-toolkit-2)) @@ -13165,18 +13271,18 @@ well.") (define-public ptpython (package (name "ptpython") - (version "0.34") + (version "3.0.5") (source (origin (method url-fetch) (uri (pypi-uri "ptpython" version)) (sha256 (base32 - "1mmbiyzf0n8hm7z2a562x7w5cbl6jc0zsk6vp40q1z4cyblv1k13")))) + "0c2ry5gwi2v99slna62j8r2bwq0hpzmvgdryqg9m6x57vbjfg52h")))) (build-system python-build-system) (arguments '(#:tests? #f)) ; FIXME: No tests in pypi tarball. (propagated-inputs - `(("python-docopt" ,python-docopt) + `(("python-appdirs" ,python-appdirs) ("python-jedi" ,python-jedi) ("python-prompt-toolkit" ,python-prompt-toolkit) ("python-pygments" ,python-pygments))) @@ -14417,7 +14523,7 @@ to ansi-escaped strings suitable for display in a terminal.") (synopsis "Convert ANSI-decorated console output to HTML") (description "@command{ansi2html} is a Python library and command line utility for -convering text with ANSI color codes to HTML or LaTeX.") +converting text with ANSI color codes to HTML or LaTeX.") (license license:gpl3+))) (define-public python2-ansi2html @@ -16060,14 +16166,14 @@ validating Swagger API specifications.") (define-public python-apache-libcloud (package (name "python-apache-libcloud") - (version "2.4.0") + (version "3.1.0") (source (origin (method url-fetch) (uri (pypi-uri "apache-libcloud" version)) (sha256 (base32 - "0daj3mkzw79v5zin2r1s2wkrz1hplfc16bwj4ss68i5qjq4l2p0j")))) + "1b28j265kvibgxrgxx0gwfm6cmv252c8ph1j2vb0cpms8ph5if5v")))) (build-system python-build-system) (arguments `(#:phases @@ -16080,22 +16186,10 @@ validating Swagger API specifications.") #t)) (add-after 'unpack 'patch-tests (lambda _ - (substitute* "./libcloud/test/test_file_fixtures.py" - ;; See <https://issues.apache.org/jira/browse/LIBCLOUD-923>. - (("def _ascii") "def _raw_data(self, method, url, body, headers): - return (httplib.OK, - \"1234abcd\", - {\"test\": \"value\"}, - httplib.responses[httplib.OK]) - def _ascii")) (substitute* "libcloud/test/compute/test_ssh_client.py" (("class ShellOutSSHClientTests") "@unittest.skip(\"Guix container doesn't have ssh service\") -class ShellOutSSHClientTests") - ;; See <https://issues.apache.org/jira/browse/LIBCLOUD-924>. - (("'.xf0.x90.x8d.x88'") "b'\\xF0\\x90\\x8D\\x88'") - (("'.xF0', '.x90', '.x8D', '.x88'") - "b'\\xF0', b'\\x90', b'\\x8D', b'\\x88'")) +class ShellOutSSHClientTests")) #t)) (add-before 'check 'copy-secret (lambda _ @@ -19217,6 +19311,54 @@ programs that do multiple things at the same time with parallelized I/O.") ;; Either license applies. (license (list license:expat license:asl2.0)))) +(define-public python-trio-typing + (package + (name "python-trio-typing") + (version "0.5.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "trio-typing" version)) + (sha256 + (base32 "1yvlj4vf3wyvp16dw6vyfm4i2idm8lvdc3fvjhi6mhm62zv7s07j")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda _ + (invoke "pytest" "-vv")))))) + (native-inputs + `(("python-attrs" ,python-attrs) + ("python-pytest" ,python-pytest))) + (propagated-inputs + `(("python-mypy" ,python-mypy) + ("python-mypy-extensions" + ,python-mypy-extensions) + ("python-trio" ,python-trio) + ("python-typing-extensions" + ,python-typing-extensions))) + (home-page "https://github.com/python-trio/trio-typing") + (synopsis "Static type checking support for Trio and related projects") + (description + "This package provides: + +@itemize +@item PEP 561 typing stubs packages for the Trio project packages: + +@itemize +@item trio (@code{trio-stubs}) +@item outcome (@code{outcome-stubs}) +@item async_generator (@code{async_generator-stubs}) +@end itemize + +@item A package @code{trio_typing} containing types that Trio programs often +want to refer to (@code{AsyncGenerator[Y, S]} and @code{TaskStatus[T])} and +a mypy plugin that smooths over some limitations in the basic type hints. +@end itemize") + ;; Either license applies. + (license (list license:expat license:asl2.0)))) + (define-public python-humanize (package (name "python-humanize") @@ -20343,6 +20485,49 @@ such as a file modification and trigger an action. This is similar to inotify, but portable.") (license license:asl2.0))) +(define-public python-watchgod + (package + (name "python-watchgod") + (version "0.6") + (source + (origin + ;; There are no tests in the PyPI tarball. + (method git-fetch) + (uri (git-reference + (url "https://github.com/samuelcolvin/watchgod") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1lqx44wkryakgpyqj3m0hsz61bqr07vc7smgzh188374hwvscp66")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda _ + (invoke "pytest" "-vv")))))) + (native-inputs + `(("python-coverage" ,python-coverage) + ("python-docutils" ,python-docutils) + ("python-flake8" ,python-flake8) + ("python-isort" ,python-isort) + ("python-pycodestyle" ,python-pycodestyle) + ("python-pyflakes" ,python-pyflakes) + ("python-pygments" ,python-pygments) + ("python-pytest" ,python-pytest) + ("python-pytest-cov" ,python-pytest-cov) + ("python-pytest-aiohttp" ,python-pytest-aiohttp) + ("python-pytest-mock" ,python-pytest-mock) + ("python-pytest-sugar" ,python-pytest-sugar) + ("python-pytest-toolbox" ,python-pytest-toolbox))) + (home-page "https://github.com/samuelcolvin/watchgod") + (synopsis "Simple, modern file watching and code reload in Python") + (description + "Simple, modern file watching and code reload in Python inspired by +@code{watchdog}. Among the differences are a unified approach for each +operating systems and an elegant approach to concurrency using threading.") + (license license:expat))) + (define-public python-wget (package (name "python-wget") @@ -21696,3 +21881,101 @@ and have a maximum lifetime built-in.") "This package provides a debug print command and other development tools. It adds a simple and readable way to print stuff during development.") (license license:expat))) + +(define-public python-dateparser + (package + (name "python-dateparser") + (version "0.7.6") + (source + (origin + (method url-fetch) + (uri (pypi-uri "dateparser" version)) + (sha256 + (base32 + "1ypbyqxlk7n6zibk90js3ybz37xmin3kk0i35g8c51bwqpcfyxg8")))) + (build-system python-build-system) + (inputs + `(("tzdata" ,tzdata))) + (propagated-inputs + `(("python-dateutil" ,python-dateutil) + ("python-pytz" ,python-pytz) + ("python-regex" ,python-regex) + ("python-ruamel.yaml" ,python-ruamel.yaml) + ("python-tzlocal" ,python-tzlocal))) + (native-inputs + `(("python-mock" ,python-mock) + ("python-parameterized" ,python-parameterized))) + (arguments + `(;; TODO: Of 23320 tests, 6 fail and 53 error. + #:tests? #f + #:phases + (modify-phases %standard-phases + (add-before 'check 'set-check-environment + (lambda* (#:key inputs #:allow-other-keys) + (setenv "TZ" "UTC") + (setenv "TZDIR" + (string-append (assoc-ref inputs "tzdata") + "/share/zoneinfo")) + #t))))) + (home-page "https://github.com/scrapinghub/dateparser") + (synopsis + "Date parsing library designed to parse dates from HTML pages") + (description + "@code{python-dateparser} provides modules to easily parse localized +dates in almost any string formats commonly found on web pages.") + (license license:bsd-3))) + +(define-public python-dparse + (package + (name "python-dparse") + (version "0.5.1") + (source + (origin + (method url-fetch) + (uri (pypi-uri "dparse" version)) + (sha256 + (base32 + "0rzkg3nymsbwdjc0ms2bsajkda02jipwyp3xk97qj71f21lz3dd1")))) + (build-system python-build-system) + (native-inputs + `(("python-pytest" ,python-pytest))) + (propagated-inputs + `(("python-packaging" ,python-packaging) + ("python-pyyaml" ,python-pyyaml) + ("python-toml" ,python-toml))) + (home-page "https://github.com/pyupio/dparse") + (synopsis "Parser for Python dependency files") + (description "This package provides a parser for Python dependency files.") + (license license:expat))) + +(define-public python-safety + (package + (name "python-safety") + (version "1.9.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "safety" version)) + (sha256 + (base32 + "1j801xsxfzavjbzhhc934awvnk1b7jc0qsw3jp3ys0241mlj1gr3")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'disable-tests + (lambda _ + (substitute* "tests/test_safety.py" + ;; requires network + (("def test_check_live") "def _test_check_live")) + #t))))) + (propagated-inputs + `(("python-click" ,python-click) + ("python-dparse" ,python-dparse) + ("python-packaging" ,python-packaging) + ("python-requests" ,python-requests))) + (home-page "https://github.com/pyupio/safety") + (synopsis "Check installed dependencies for known vulnerabilities") + (description "Safety checks installed dependencies for known vulnerabilities. +By default it uses the open Python vulnerability database Safety DB.") + (license license:expat))) diff --git a/gnu/packages/python.scm b/gnu/packages/python.scm index 45d7288817..993ca0b40f 100644 --- a/gnu/packages/python.scm +++ b/gnu/packages/python.scm @@ -581,7 +581,9 @@ for more information."))) (description "This package provides wrappers for the commands of Python@tie{}3.x such that they can be invoked under their usual name---e.g., @command{python} -instead of @command{python3}."))) +instead of @command{python3} or @command{pip} instead of @command{pip3}. +To function properly, this package should not be installed together with the +@command{python} package."))) (define-public python-wrapper (wrap-python3 python)) (define-public python-minimal-wrapper (wrap-python3 python-minimal)) diff --git a/gnu/packages/rdf.scm b/gnu/packages/rdf.scm index e68e57818d..b1906a6145 100644 --- a/gnu/packages/rdf.scm +++ b/gnu/packages/rdf.scm @@ -6,6 +6,7 @@ ;;; Copyright © 2020 Alexandros Theodotou <alex@zrythm.org> ;;; Copyright © 2020 Pjotr Prins <pjotr.guix@thebird.nl> ;;; Copyright © 2020 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2020 pukkamustard <pukkamustard@posteo.net> ;;; ;;; This file is part of GNU Guix. ;;; @@ -413,3 +414,32 @@ parser and serializer.") (description "This package contains RDF Collections flattener for @code{rdflib}.") (license license:asl2.0))) + +(define-public hdt-cpp + (package + (name "hdt-cpp") + (version "1.3.3") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/rdfhdt/hdt-cpp") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1vsq80jnix6cy78ayag7v8ajyw7h8dqyad1q6xkf2hzz3skvr34z")))) + (build-system gnu-build-system) + (inputs + `(("serd" ,serd) + ("zlib" ,zlib))) + (native-inputs + `(("autoconf" ,autoconf) + ("automake" ,automake) + ("libtool" ,libtool) + ("pkg-config" ,pkg-config))) + (home-page "https://github.com/rdfhdt/hdt-cpp") + (synopsis "C++ implementation of the HDT compression format") + (description "Header Dictionary Triples (HDT) is a compression format for +RDF data that can also be queried for Triple Patterns. This package provides a +C++ library as well as various command-line tools to to work with HDT.") +(license license:lgpl2.1+))) diff --git a/gnu/packages/ruby.scm b/gnu/packages/ruby.scm index 71c93c0c8d..81269d28d9 100644 --- a/gnu/packages/ruby.scm +++ b/gnu/packages/ruby.scm @@ -7,7 +7,7 @@ ;;; Copyright © 2015, 2016, 2017 Ben Woodcroft <donttrustben@gmail.com> ;;; Copyright © 2017 Nikita <nikita@n0.is> ;;; Copyright © 2017, 2019, 2020 Marius Bakke <mbakke@fastmail.com> -;;; Copyright © 2017, 2018, 2019 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2017, 2018, 2019, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2017, 2018, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2017 Clément Lassieur <clement@lassieur.org> ;;; Copyright © 2017, 2018, 2019 Christopher Baines <mail@cbaines.net> @@ -1117,7 +1117,7 @@ line of code.") #t)) (add-after 'unpack 'patch-pandoc-path (lambda* (#:key inputs #:allow-other-keys) - (let ((pandoc (string-append (assoc-ref inputs "ghc-pandoc") + (let ((pandoc (string-append (assoc-ref inputs "pandoc") "/bin/pandoc"))) (substitute* "lib/pandoc-ruby.rb" (("@@pandoc_path = 'pandoc'") @@ -1137,7 +1137,7 @@ line of code.") (native-inputs `(("ruby-mocha" ,ruby-mocha))) (inputs - `(("ghc-pandoc" ,ghc-pandoc))) + `(("pandoc" ,pandoc))) (synopsis "Ruby wrapper for Pandoc") (description "PandocRuby is a wrapper for Pandoc, a Haskell library with command line tools for converting one markup format to another. Pandoc can @@ -6745,7 +6745,7 @@ inspired by the Sinatra microframework style of specifying actions: (define-public ruby-rubocop-ast (package (name "ruby-rubocop-ast") - (version "0.1.0") + (version "0.3.0") (source (origin (method git-fetch) ;no test suite in distributed gem @@ -6755,7 +6755,7 @@ inspired by the Sinatra microframework style of specifying actions: (file-name (git-file-name name version)) (sha256 (base32 - "0nz25z5b76xkgb9sh370hni3l946j07fr05cdwkdj9x7ibgsb6nj")))) + "1ycf6qcj8nbzk2js72priim4642lkn56w5kbny1nlryjkckxgm04")))) (build-system ruby-build-system) (arguments `(#:test-target "spec" diff --git a/gnu/packages/rust-apps.scm b/gnu/packages/rust-apps.scm index d0960226c5..0700167521 100644 --- a/gnu/packages/rust-apps.scm +++ b/gnu/packages/rust-apps.scm @@ -4,6 +4,8 @@ ;;; Copyright © 2020 Jakub Kądziołka <kuba@kadziolka.net> ;;; Copyright © 2020 Michael Rohleder <mike@rohleder.de> ;;; Copyright © 2020 Leo Famulari <leo@famulari.name> +;;; Copyright © 2020 Mark H Weaver <mhw@netris.org> +;;; Copyright © 2020 Gabriel Arazas <foo.dogsquared@gmail.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -204,6 +206,34 @@ While it does not seek to mirror all of find's powerful functionality, it provides defaults for 80% of the use cases.") (license (list license:expat license:asl2.0)))) +(define-public hexyl + (package + (name "hexyl") + (version "0.8.0") + (source + (origin + (method url-fetch) + (uri (crate-uri "hexyl" version)) + (file-name + (string-append name "-" version ".tar.gz")) + (sha256 + (base32 + "0sipag77196467idbznbk5q5lwhqz85zw7y1pwg9b27jxqyk04rp")))) + (build-system cargo-build-system) + (arguments + `(#:cargo-inputs + (("rust-ansi-term" ,rust-ansi-term-0.12) + ("rust-atty" ,rust-atty-0.2) + ("rust-clap" ,rust-clap-2) + ("rust-libc" ,rust-libc-0.2)))) + (home-page "https://github.com/sharkdp/hexyl") + (synopsis "Command-line hex viewer") + (description + "This package provides a command line hex viewer. It uses a colored output +for distinguishing different kinds of bytes such as NULL bytes, printable ASCII +characters, ASCII whitespace characters, other ASCII characters and non-ASCII.") + (license (list license:expat license:asl2.0)))) + (define-public ripgrep (package (name "ripgrep") @@ -292,6 +322,21 @@ gitignore rules.") "This package provides a tool for generating C/C++ bindings to Rust code.") (license license:mpl2.0))) +(define-public rust-cbindgen-0.14 + (package + (inherit rust-cbindgen) + (name "rust-cbindgen") + (version "0.14.1") + (source + (origin + (method url-fetch) + (uri (crate-uri "cbindgen" version)) + (file-name + (string-append name "-" version ".tar.gz")) + (sha256 + (base32 + "1ppwqbzydxlg9a24lynzfk60xrvqw4k31mpz1wrk6lbf88zf8nxi")))))) + (define-public rust-cbindgen-0.12 (package (inherit rust-cbindgen) diff --git a/gnu/packages/rust.scm b/gnu/packages/rust.scm index 778aeaab05..d5914f012b 100644 --- a/gnu/packages/rust.scm +++ b/gnu/packages/rust.scm @@ -1317,5 +1317,9 @@ move around." (string-append "#[ignore] " all))) #t))))))))) +(define-public rust-1.46 + (rust-bootstrapped-package rust-1.45 "1.46.0" + "0a17jby2pd050s24cy4dfc0gzvgcl585v3vvyfilniyvjrqknsid")) + ;; TODO(staging): Bump this variable to the latest packaged rust. (define-public rust rust-1.39) diff --git a/gnu/packages/samba.scm b/gnu/packages/samba.scm index 0fa19e355c..84e389340b 100644 --- a/gnu/packages/samba.scm +++ b/gnu/packages/samba.scm @@ -59,14 +59,14 @@ (define-public cifs-utils (package (name "cifs-utils") - (version "6.10") + (version "6.11") (source (origin (method url-fetch) (uri (string-append "https://download.samba.org/pub/linux-cifs/" "cifs-utils/cifs-utils-" version ".tar.bz2")) (sha256 (base32 - "19q4b5bzlxhn1hpi843xrp6f50d33w7m0rs26krkg5h3x742kz4j")))) + "1n98hy3zi4klm1xxhb840br1x7hhz0xx8kp5sch84kr07yd26ndq")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) diff --git a/gnu/packages/scheme.scm b/gnu/packages/scheme.scm index ffbe90a52e..f787b5e0f8 100644 --- a/gnu/packages/scheme.scm +++ b/gnu/packages/scheme.scm @@ -13,6 +13,7 @@ ;;; Copyright © 2018 Gabriel Hondet <gabrielhondet@gmail.com> ;;; Copyright © 2020 Pierre Neidhardt <mail@ambrevar.xyz> ;;; Copyright © 2020 Brett Gilio <brettg@gnu.org> +;;; Copyright © 2020 Edouard Klein <edk@beaver-labs.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -32,7 +33,7 @@ (define-module (gnu packages scheme) #:use-module (gnu packages) #:use-module ((guix licenses) - #:select (gpl2+ lgpl2.0+ lgpl2.1+ lgpl3+ asl2.0 bsd-3 + #:select (gpl2+ lgpl2.0+ lgpl2.1 lgpl2.1+ lgpl3+ asl2.0 bsd-3 cc-by-sa4.0 non-copyleft expat)) #:use-module (guix packages) #:use-module (guix download) @@ -71,6 +72,7 @@ #:use-module (gnu packages tls) #:use-module (gnu packages gl) #:use-module (gnu packages libedit) + #:use-module (gnu packages linux) #:use-module (srfi srfi-1) #:use-module (ice-9 match)) @@ -396,7 +398,7 @@ implementation techniques and as an expository tool.") (define-public racket (package (name "racket") - (version "7.8") + (version "7.8") ;; Note: Remember to also update racket-minimal! (source (origin (method url-fetch) (uri (list (string-append "http://mirror.racket-lang.org/installers/" @@ -538,7 +540,7 @@ of libraries.") version "/racket-minimal-" version "-src.tgz"))) (sha256 (base32 - "1lxcd4ix8q3089xql48hwccxvcpkinfxwxnc6fhcjdgzqcyxh3ln")) + "0bbglf9vfacpm2hn3lskhvc8cpg6z088fbnzpqsn17z8qdk8yvb3")) (patches (search-patches "racket-store-checksum-override.patch")))) (synopsis "Racket without bundled packages such as Dr. Racket") @@ -1077,3 +1079,107 @@ multilingual support are some of the goals. Gauche comes with a package manager/installer @code{gauche-package} which can download, compile, install and list gauche extension packages.") (license bsd-3))) + +(define-public gerbil + (package + (name "gerbil") + (version "0.16") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/vyzo/gerbil") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0vng0kxpnwsg8jbjdpyn4sdww36jz7zfpfbzayg9sdpz6bjxjy0f")))) + (arguments + `(#:phases + (modify-phases %standard-phases + (delete 'bootstrap) + (add-before 'configure 'chdir + (lambda _ + (chdir "src") + #t)) + (replace 'configure + (lambda* (#:key outputs inputs #:allow-other-keys) + (invoke "chmod" "755" "-R" ".") + ;; Otherwise fails when editing an r--r--r-- file. + (invoke "gsi-script" "configure" + "--prefix" (assoc-ref outputs "out") + "--with-gambit" (assoc-ref inputs "gambit-c")))) + (add-before 'patch-generated-file-shebangs 'fix-gxi-shebangs + (lambda _ + ;; Some .ss files refer to gxi using /usr/bin/env gxi + ;; and 'patch-generated-file-shebangs can't fix that + ;; because gxi has not been compiled yet. + ;; We know where gxi is going to end up so we + ;; Doctor Who our fix here before the problem + ;; happens towards the end of the build.sh script. + (let ((abs-srcdir (getcwd))) + (for-each + (lambda (f) + (substitute* f + (("#!/usr/bin/env gxi") + (string-append "#!" abs-srcdir "/../bin/gxi")))) + '("./gerbil/gxc" + "./lang/build.ss" + "./misc/http-perf/build.ss" + "./misc/rpc-perf/build.ss" + "./misc/scripts/docsnarf.ss" + "./misc/scripts/docstub.ss" + "./misc/scripts/docsyms.ss" + "./r7rs-large/build.ss" + "./release.ss" + "./std/build.ss" + "./std/run-tests.ss" + "./std/web/fastcgi-test.ss" + "./std/web/rack-test.ss" + "./tools/build.ss" + "./tutorial/httpd/build.ss" + "./tutorial/kvstore/build.ss" + "./tutorial/lang/build.ss" + "./tutorial/proxy/build-static.ss" + "./tutorial/proxy/build.ss"))) + #t)) + (replace + 'build + (lambda* + (#:key inputs #:allow-other-keys) + (setenv "HOME" (getcwd)) + (invoke + ;; The build script needs a tty or it'll crash on an ioctl + ;; trying to find the width of the terminal it's running on. + ;; Calling in script prevents that. + "script" + "-qefc" + "./build.sh"))) + (delete 'check) + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (bin (string-append out "/bin")) + (lib (string-append out "/lib"))) + (mkdir-p bin) + (mkdir-p lib) + (copy-recursively "../bin" bin) + (copy-recursively "../lib" lib))))))) + (native-inputs + `(("coreutils" ,coreutils) + ("util-linux" ,util-linux))) + (propagated-inputs + `(("gambit-c" ,gambit-c) + ("zlib" ,zlib) + ("openssl" ,openssl) + ("sqlite" ,sqlite))) + (build-system gnu-build-system) + (synopsis "Meta-dialect of Scheme with post-modern features") + (description "Gerbil is an opinionated dialect of Scheme designed for Systems +Programming, with a state of the art macro and module system on top of the Gambit +runtime. The macro system is based on quote-syntax, and provides the full meta-syntactic +tower with a native implementation of syntax-case. It also provides a full-blown module +system, similar to PLT Scheme's (sorry, Racket) modules. The main difference from Racket +is that Gerbil modules are single instantiation, supporting high performance ahead of +time compilation and compiled macros.") + (home-page "https://cons.io") + (license `(,lgpl2.1 ,asl2.0)))) diff --git a/gnu/packages/shells.scm b/gnu/packages/shells.scm index f8b7ada1e8..7868dc40f0 100644 --- a/gnu/packages/shells.scm +++ b/gnu/packages/shells.scm @@ -65,14 +65,14 @@ (define-public dash (package (name "dash") - (version "0.5.11.1") + (version "0.5.11.2") (source (origin (method url-fetch) (uri (string-append "http://gondor.apana.org.au/~herbert/dash/files/" "dash-" version ".tar.gz")) (sha256 - (base32 "048n1rbw3v1ffzsw5mkc6zzvvf1csq7pcri7jraaqag38vqq3j3k")) + (base32 "0pvdpm1cgfbc25ramn4305a0158yq031q1ain4dc972rnxl7vyq0")) (modules '((guix build utils))) (snippet '(begin @@ -513,14 +513,13 @@ ksh, and tcsh.") (define-public xonsh (package (name "xonsh") - (version "0.9.19") + (version "0.9.21") (source (origin (method url-fetch) (uri (pypi-uri "xonsh" version)) (sha256 - (base32 - "0k7v2d166w74j4pw1v72dskhb1xxn40hz874579v4yyvbpfpazcp")) + (base32 "1mih5w73wp57fnf1vcxnfmm5d31vm7pz8fq5a9vw1ch3dv0yczl5")) (modules '((guix build utils))) (snippet `(begin diff --git a/gnu/packages/ssh.scm b/gnu/packages/ssh.scm index bfccfee250..79f8256a3f 100644 --- a/gnu/packages/ssh.scm +++ b/gnu/packages/ssh.scm @@ -296,81 +296,80 @@ Additionally, various channel-specific options can be negotiated.") (synopsis "OpenSSH client and server without X11 support"))) (define-public guile-ssh - ;; This unreleased commit fixes for <https://issues.guix.gnu.org/42740>. - (let ((commit "688d7f3797b5155257a6c2ee4ea5084b3d8cc244") - (revision "1")) - (package - (name "guile-ssh") - (version (git-version "0.13.0" revision commit)) - (home-page "https://github.com/artyom-poptsov/guile-ssh") - (source (origin - (method git-fetch) - (uri (git-reference - (url home-page) - (commit commit))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "0mbff4v8738pmcs6sdma4b9gqb0bklraj346i5g5b1mwdywhzljj")) - (modules '((guix build utils))))) - (build-system gnu-build-system) - (outputs '("out" "debug")) - (arguments - `(#:configure-flags '("--disable-static") - #:phases - (modify-phases %standard-phases - (add-before 'build 'fix-libguile-ssh-file-name - (lambda* (#:key outputs #:allow-other-keys) - ;; Build and install libguile-ssh.so so that we can use - ;; its absolute file name in .scm files, before we build - ;; the .go files. - (let* ((out (assoc-ref outputs "out")) - (lib (string-append out "/lib"))) - (invoke "make" "install" - "-C" "libguile-ssh" - "-j" (number->string - (parallel-job-count))) - (substitute* (find-files "." "\\.scm$") - (("\"libguile-ssh\"") - (string-append "\"" lib "/libguile-ssh\""))) - #t))) - ,@(if (%current-target-system) - '() - '((add-before 'check 'fix-guile-path - (lambda* (#:key inputs #:allow-other-keys) - (let ((guile (assoc-ref inputs "guile"))) - (substitute* "tests/common.scm" - (("/usr/bin/guile") - (string-append guile "/bin/guile"))) - #t))))) - (add-after 'install 'remove-bin-directory - (lambda* (#:key outputs #:allow-other-keys) - (let* ((out (assoc-ref outputs "out")) - (bin (string-append out "/bin")) - (examples (string-append - out "/share/guile-ssh/examples"))) - (mkdir-p examples) - (rename-file (string-append bin "/ssshd.scm") - (string-append examples "/ssshd.scm")) - (rename-file (string-append bin "/sssh.scm") - (string-append examples "/sssh.scm")) - (delete-file-recursively bin) - #t)))))) - (native-inputs `(("autoconf" ,autoconf) - ("automake" ,automake) - ("libtool" ,libtool) - ("texinfo" ,texinfo) - ("pkg-config" ,pkg-config) - ("which" ,which) - ("guile" ,guile-3.0))) ;needed when cross-compiling. - (inputs `(("guile" ,guile-3.0) - ("libssh" ,libssh) - ("libgcrypt" ,libgcrypt))) - (synopsis "Guile bindings to libssh") - (description "Guile-SSH is a library that provides access to the SSH -protocol for programs written in GNU Guile interpreter. It is a wrapper to -the underlying libssh library.") - (license license:gpl3+)))) + (package + (name "guile-ssh") + (version "0.13.1") + (home-page "https://github.com/artyom-poptsov/guile-ssh") + (source (origin + (method git-fetch) + (uri (git-reference + (url home-page) + (commit (string-append "v" version)))) + (file-name (string-append name "-" version ".tar.gz")) + (sha256 + (base32 + "1xpxkvgj7wgcl450djkcrmrf957mcy2f36hfs5g6kpla1gax2d1g")) + (modules '((guix build utils))))) + (build-system gnu-build-system) + (outputs '("out" "debug")) + (arguments + `(;; It makes no sense to build libguile-ssh.a. + #:configure-flags '("--disable-static") + + #:phases (modify-phases %standard-phases + (add-before 'build 'fix-libguile-ssh-file-name + (lambda* (#:key outputs #:allow-other-keys) + ;; Build and install libguile-ssh.so so that we can use + ;; its absolute file name in .scm files, before we build + ;; the .go files. + (let* ((out (assoc-ref outputs "out")) + (lib (string-append out "/lib"))) + (invoke "make" "install" + "-C" "libguile-ssh" + "-j" (number->string + (parallel-job-count))) + (substitute* (find-files "." "\\.scm$") + (("\"libguile-ssh\"") + (string-append "\"" lib "/libguile-ssh\""))) + #t))) + ,@(if (%current-target-system) + '() + '((add-before 'check 'fix-guile-path + (lambda* (#:key inputs #:allow-other-keys) + (let ((guile (assoc-ref inputs "guile"))) + (substitute* "tests/common.scm" + (("/usr/bin/guile") + (string-append guile "/bin/guile"))) + #t))))) + (add-after 'install 'remove-bin-directory + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (bin (string-append out "/bin")) + (examples (string-append + out "/share/guile-ssh/examples"))) + (mkdir-p examples) + (rename-file (string-append bin "/ssshd.scm") + (string-append examples "/ssshd.scm")) + (rename-file (string-append bin "/sssh.scm") + (string-append examples "/sssh.scm")) + (delete-file-recursively bin) + #t)))))) + (native-inputs `(("autoconf" ,autoconf) + ("automake" ,automake) + ("libtool" ,libtool) + ("texinfo" ,texinfo) + ("pkg-config" ,pkg-config) + ("which" ,which) + ("guile" ,guile-3.0))) ;needed when cross-compiling. + (inputs `(("guile" ,guile-3.0) + ("libssh" ,libssh) + ("libgcrypt" ,libgcrypt))) + (synopsis "Guile bindings to libssh") + (description + "Guile-SSH is a library that provides access to the SSH protocol for +programs written in GNU Guile interpreter. It is a wrapper to the underlying +libssh library.") + (license license:gpl3+))) (define-public guile2.0-ssh (package diff --git a/gnu/packages/sssd.scm b/gnu/packages/sssd.scm index c004e8c21c..aa91424b4d 100644 --- a/gnu/packages/sssd.scm +++ b/gnu/packages/sssd.scm @@ -90,7 +90,8 @@ fundamental object types for C.") (sha256 (base32 "1h6hwibaf3xa2w6qpzjiiywmfj6zkgbz4r2isf3gd0xm6vq7n6if")) - (patches (search-patches "sssd-fix-samba.patch")))) + (patches (search-patches "sssd-fix-samba.patch" + "sssd-system-directories.patch")))) (build-system gnu-build-system) (arguments `(#:make-flags @@ -103,7 +104,10 @@ fundamental object types for C.") ;; online DTDs. "XMLLINT_FLAGS = --catalogs --nonet --noent --xinclude --noout") #:configure-flags - (list "--disable-cifs-idmap-plugin" + (list "--localstatedir=/var" ;for /var/lib/sss, /var/run/sssd.pid, etc. + "--sysconfdir=/etc" ;/etc/sssd + + "--disable-cifs-idmap-plugin" "--without-nfsv4-idmapd-plugin" "--without-python2-bindings" "--without-python3-bindings" diff --git a/gnu/packages/statistics.scm b/gnu/packages/statistics.scm index bae80ab610..82f97c679e 100644 --- a/gnu/packages/statistics.scm +++ b/gnu/packages/statistics.scm @@ -88,7 +88,7 @@ (define-public pspp (package (name "pspp") - (version "1.4.0") + (version "1.4.1") (source (origin (method url-fetch) @@ -96,7 +96,7 @@ version ".tar.gz")) (sha256 (base32 - "0gv6rd5nfn53wb40s8bi3gdidikb90v2lv331dn0pvb91h976433")))) + "0lqrash677b09zxdlxp89z6k02y4i23mbqg83956dwl69wc53dan")))) (build-system gnu-build-system) (inputs `(("cairo" ,cairo) @@ -429,14 +429,14 @@ D.V. Hinkley (1997, CUP), originally written by Angelo Canty for S.") (define-public r-mass (package (name "r-mass") - (version "7.3-52") + (version "7.3-53") (source (origin (method url-fetch) (uri (cran-uri "MASS" version)) (sha256 (base32 - "0c4scl7r4m0bikr0wmdrnn7wfzy1vg5v7gsq6bms2vknzs9ymhxp")))) + "0f2bwsbqr3nzsqxva051lg8wd068naqif3vc48hac0m3mmq4x0j1")))) (properties `((upstream-name . "MASS"))) (build-system r-build-system) (home-page "http://www.stats.ox.ac.uk/pub/MASS4/") @@ -599,13 +599,13 @@ and operations on them using LAPACK and SuiteSparse.") (define-public r-nlme (package (name "r-nlme") - (version "3.1-148") + (version "3.1-149") (source (origin (method url-fetch) (uri (cran-uri "nlme" version)) (sha256 - (base32 "1cmf43r82kar1hpj9dhqfi3rbjka0z5s6cbdy7fklwh99xj3phkp")))) + (base32 "16n39v36hdp5vy3s3xqgs6ai0vgzx6j2py7ghpljdahndbqn6qn9")))) (build-system r-build-system) (propagated-inputs `(("r-lattice" ,r-lattice))) @@ -621,13 +621,13 @@ nonlinear mixed-effects models.") (define-public r-mgcv (package (name "r-mgcv") - (version "1.8-32") + (version "1.8-33") (source (origin (method url-fetch) (uri (cran-uri "mgcv" version)) (sha256 - (base32 "1859lnwkmggk36616cnhk3b9qv1qkgf0cz5mfavv3jry7bad3xbg")))) + (base32 "1x1bdzz2b2f05626xygwqp30b4rhblgg76hs15j9ab4fjan7pjwq")))) (build-system r-build-system) (propagated-inputs `(("r-matrix" ,r-matrix) @@ -771,14 +771,14 @@ binary booleans, @code{TRUE} and @code{FALSE} can be stored with 1 bit only.") (define-public r-bit64 (package (name "r-bit64") - (version "4.0.2") + (version "4.0.5") (source (origin (method url-fetch) (uri (cran-uri "bit64" version)) (sha256 (base32 - "1yrwvgvxdlsa8y42l05vy173qndlqkwfk6mp2zrqwm8l7c7p79g9")))) + "0y0m7q1rwam1g88cjx7zyi07mj5dipxd9jkl90f294syx8k6ipr5")))) (build-system r-build-system) (propagated-inputs `(("r-bit" ,r-bit))) @@ -1026,14 +1026,14 @@ solution for sending email, including attachments, from within R.") (define-public r-stringi (package (name "r-stringi") - (version "1.4.6") + (version "1.5.3") (source (origin (method url-fetch) (uri (cran-uri "stringi" version)) (sha256 (base32 - "1mkgxzf000zdgbbbvg2vf4md4l501n5lfksffq8vdg6pbgd6fgv3")))) + "0420f7zn5knyyvd3a3xa7059l4kadw0m67rfpivacqn9xn6iwkr2")))) (build-system r-build-system) (inputs `(("icu4c" ,icu4c))) (native-inputs `(("pkg-config" ,pkg-config))) @@ -1135,13 +1135,13 @@ aesthetic attributes.") (define-public r-ggdendro (package (name "r-ggdendro") - (version "0.1.21") + (version "0.1.22") (source (origin (method url-fetch) (uri (cran-uri "ggdendro" version)) (sha256 (base32 - "0jcjdkhd3wirjgv4v3gb9rw8idyymwhwnxplg3wi8wa3mwr9rhq2")))) + "0skbj487b6f6pj2iz4yq2b9gbgb39cv5dyzhdl3w7ay1k0s5z9ph")))) (build-system r-build-system) (propagated-inputs `(("r-ggplot2" ,r-ggplot2) @@ -2100,14 +2100,14 @@ limited to R.") (define-public r-backports (package (name "r-backports") - (version "1.1.8") + (version "1.1.9") (source (origin (method url-fetch) (uri (cran-uri "backports" version)) (sha256 (base32 - "1irc9c23hwliwkky1b3hi0dkzwalhb7zgjj08562ff1k8dqv4qf6")))) + "1mz3r6ad484xmx0i89gvmak4wzl4cp59gxdzirrci9znw1axrrvx")))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/backports") (synopsis "Reimplementations of functions introduced since R 3.0.0") @@ -2598,13 +2598,13 @@ well as additional utilities such as panel and axis annotation functions.") (define-public r-rcpparmadillo (package (name "r-rcpparmadillo") - (version "0.9.900.2.0") + (version "0.9.900.3.0") (source (origin (method url-fetch) (uri (cran-uri "RcppArmadillo" version)) (sha256 (base32 - "03dfy0avzpiaf1jk8h18y2gyj3zwlfvvfixi13q3zq5qaz93by2r")))) + "0x8jm6cvfvp1kyckwwqxyy5hfkr8na28fih3k0lhi55wry3ml30q")))) (properties `((upstream-name . "RcppArmadillo"))) (build-system r-build-system) (propagated-inputs @@ -3458,13 +3458,13 @@ memory-mapped files.") (define-public r-r-methodss3 (package (name "r-r-methodss3") - (version "1.8.0") + (version "1.8.1") (source (origin (method url-fetch) (uri (cran-uri "R.methodsS3" version)) (sha256 (base32 - "19c5870v7b59fs6xk58bh3rfkmhfralmgsax86zzpdmz47pga1g0")))) + "16v1br7lf7vxv40z65giv9jnqkpnyqagcmgqa0s1jy7spj0zp64a")))) (properties `((upstream-name . "R.methodsS3"))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/R.methodsS3") @@ -3482,13 +3482,13 @@ want to migrate to S4.") (define-public r-r-oo (package (name "r-r-oo") - (version "1.23.0") + (version "1.24.0") (source (origin (method url-fetch) (uri (cran-uri "R.oo" version)) (sha256 (base32 - "189fb7mmyzwg6nn8rza8iip7fbyws7i2vkmzy672x9mhvgilq4pm")))) + "1divisff26fmiqg6vmabnwlrx079c066r8qvkakfp336vnwdm89p")))) (properties `((upstream-name . "R.oo"))) (build-system r-build-system) (propagated-inputs @@ -3505,13 +3505,13 @@ maintenance for package developers.") (define-public r-r-utils (package (name "r-r-utils") - (version "2.9.2") + (version "2.10.1") (source (origin (method url-fetch) (uri (cran-uri "R.utils" version)) (sha256 (base32 - "1krj1ny7y43lpm2q8c7swxfdc3ngy2j8knzv71f8bfsgh673nsxc")))) + "1gssnk73nhisc20by9kvfl4byfsmwrk6597na0x40ycck58lyylm")))) (properties `((upstream-name . "R.utils"))) (build-system r-build-system) (propagated-inputs @@ -3712,14 +3712,14 @@ selection.") (define-public r-tidyr (package (name "r-tidyr") - (version "1.1.1") + (version "1.1.2") (source (origin (method url-fetch) (uri (cran-uri "tidyr" version)) (sha256 (base32 - "05bv4086axk21gsszx9rvzlz6jq4bcqm462nys8g91gqw003zljh")))) + "0v7x1pgmwmjypzdr4j2ig2klgrrgryi3qvw8hwqv65a5h9kwpz08")))) (build-system r-build-system) (propagated-inputs `(("r-cpp11" ,r-cpp11) @@ -4522,20 +4522,22 @@ Farebrother's algorithm or Liu et al.'s algorithm.") (define-public r-cowplot (package (name "r-cowplot") - (version "1.0.0") + (version "1.1.0") (source (origin (method url-fetch) (uri (cran-uri "cowplot" version)) (sha256 (base32 - "19cqdhgfyr1wj0fz0c5ly8f0aiy9sfgzq6lzb78hkx0hdp2agybh")))) + "04d5pg4xi9nhgcbam71b5mp3q1g804ng864v90add1kddfyl3f9h")))) (build-system r-build-system) (propagated-inputs `(("r-ggplot2" ,r-ggplot2) ("r-gtable" ,r-gtable) ("r-rlang" ,r-rlang) ("r-scales" ,r-scales))) + (native-inputs + `(("r-knitr" ,r-knitr))) (home-page "https://github.com/wilkelab/cowplot") (synopsis "Streamlined plot theme and plot annotations for ggplot2") (description @@ -5094,13 +5096,13 @@ using modular prediction and response module classes.") (define-public r-quantreg (package (name "r-quantreg") - (version "5.61") + (version "5.67") (source (origin (method url-fetch) (uri (cran-uri "quantreg" version)) (sha256 - (base32 "0kby1crnzkdg5sczwqapfpkr58apyzrrx85khigcqggmhhwl44wk")))) + (base32 "09hgch8x6x2k7wm17c0njp7l0r6rrrlcji60afrv19dm9r4596wr")))) (build-system r-build-system) (native-inputs `(("gfortran" ,gfortran))) @@ -5310,14 +5312,14 @@ normals.") (define-public r-mnormt (package (name "r-mnormt") - (version "2.0.1") + (version "2.0.2") (source (origin (method url-fetch) (uri (cran-uri "mnormt" version)) (sha256 (base32 - "00nn0b6nksn2jbpg0np5wphryp4f9v95vqxf5v628yysnawgkcwq")))) + "0d7ka4l4fl1wi77r2r81dc91n6cbj2xrb3lsizz5y0ziscva0sjw")))) (build-system r-build-system) (propagated-inputs `(("r-tmvnsim" ,r-tmvnsim))) diff --git a/gnu/packages/syncthing.scm b/gnu/packages/syncthing.scm index 857b8a8813..434e236054 100644 --- a/gnu/packages/syncthing.scm +++ b/gnu/packages/syncthing.scm @@ -228,6 +228,7 @@ Protocol.") `(("gtk+" ,gtk+) ("libappindicator" ,libappindicator) ("libnotify" ,libnotify) + ("librsvg" ,librsvg) ("python2-bcrypt" ,python2-bcrypt) ("python2-dateutil" ,python2-dateutil) ("python2-pycairo" ,python2-pycairo) diff --git a/gnu/packages/syndication.scm b/gnu/packages/syndication.scm index b8665fb9c3..eea6817ce6 100644 --- a/gnu/packages/syndication.scm +++ b/gnu/packages/syndication.scm @@ -97,7 +97,7 @@ ("rust-gettext-rs" ,rust-gettext-rs-0.4) ("rust-gettext-sys" ,rust-gettext-sys-0.19) ("rust-libc" ,rust-libc-0.2) - ("rust-libz-sys" ,rust-libz-sys-1.0) + ("rust-libz-sys" ,rust-libz-sys-1) ("rust-natord" ,rust-natord-1.0) ("rust-nom" ,rust-nom-5) ("rust-once-cell" ,rust-once-cell-1.2) @@ -183,7 +183,7 @@ file system, and many more features.") (define-public liferea (package (name "liferea") - (version "1.12.8") + (version "1.12.9") (source (origin (method url-fetch) @@ -191,7 +191,7 @@ file system, and many more features.") "releases/download/v" version "/liferea-" version ".tar.bz2")) (sha256 - (base32 "1xm5if831llkjcmbq4w9ssgqjgy3zlb5n9y7kh54xpy6afafbsh7")))) + (base32 "06ybr1wjlfir8iqjx6x0v1knd4b2hsy30qmkk4kssy6ky2ahc66q")))) (build-system glib-or-gtk-build-system) (arguments `(#:phases @@ -206,9 +206,9 @@ file system, and many more features.") (gi-typelib-path (getenv "GI_TYPELIB_PATH")) (python-path (getenv "PYTHONPATH"))) (wrap-program (string-append out "/bin/liferea") - `("GI_TYPELIB_PATH" ":" prefix (,gi-typelib-path)) - `("PYTHONPATH" ":" prefix (,python-path)))) - #t))))) + `("GI_TYPELIB_PATH" ":" prefix (,gi-typelib-path)) + `("PYTHONPATH" ":" prefix (,python-path)))) + #t))))) (native-inputs `(("gettext" ,gettext-minimal) ("glib:bin" ,glib "bin") diff --git a/gnu/packages/telephony.scm b/gnu/packages/telephony.scm index be50ab3c95..6ee1b2c250 100644 --- a/gnu/packages/telephony.scm +++ b/gnu/packages/telephony.scm @@ -323,14 +323,14 @@ GNU ccRTP stack and serves as library for other RTP stacks (define-public osip (package (name "osip") - (version "5.1.1") + (version "5.1.2") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/osip/libosip2-" version ".tar.gz")) (patches (search-patches "osip-CVE-2017-7853.patch")) (sha256 (base32 - "0kgnxgzf968kbl6rx3hjsfb3jsg4ydgrsf35gzj319i1f8qjifv1")))) + "148j1i0zkwf09qdpk3nc5sssj1dvppw7p0n9rgrg8k56447l1h1b")))) (build-system gnu-build-system) (synopsis "Library implementing SIP (RFC-3261)") diff --git a/gnu/packages/tex.scm b/gnu/packages/tex.scm index c4f9f6cfb7..63b144c45b 100644 --- a/gnu/packages/tex.scm +++ b/gnu/packages/tex.scm @@ -13,6 +13,7 @@ ;;; Copyright © 2018 Danny Milosavljevic <dannym+a@scratchpost.org> ;;; Copyright © 2018, 2020 Arun Isaac <arunisaac@systemreboot.net> ;;; Copyright © 2020 Vincent Legoll <vincent.legoll@gmail.com> +;;; Copyright © 2020 Paul Garlick <pgarlick@tourbillion-technology.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -7308,3 +7309,74 @@ facilities designed to cope with the more specific demands of academic writing, especially in the humanities and the social sciences. All quote styles as well as the optional active quotes are freely configurable.") (license license:lppl1.3c+)))) + +(define-public texlive-logreq + (let ((template (simple-texlive-package + "texlive-logreq" + (list "/doc/latex/logreq/" + "/tex/latex/logreq/") + (base32 + "13difccs3cxlkqlnhw286yb0c7mifrxfd402a2x5wwxv0m1kgfqd") + #:trivial? #t))) + (package + (inherit template) + (propagated-inputs + `(("texlive-etoolbox" ,texlive-etoolbox))) + (home-page "https://www.ctan.org/pkg/logreq") + (synopsis "Support for automation of the LaTeX workflow") + (description "The package helps to automate a typical LaTeX +workflow that involves running LaTeX several times and running tools +such as BibTeX or makeindex. It will log requests like \"please rerun +LaTeX\" or \"please run BibTeX on file X\" to an external file in a +machine-readable format. Compiler scripts and integrated LaTeX +editing environments may parse this file to determine the next steps +in the workflow. In sum, the package will do two things: + +@enumerate +@item +enable package authors to use LaTeX commands to issue requests, and + +@item +collect all requests from all packages and write them to an external +XML file. +@end enumerate\n") + (license license:lppl1.3c)))) + +(define-public texlive-biblatex + (let ((template (simple-texlive-package + "texlive-biblatex" + (list "/doc/latex/biblatex/" + "/tex/latex/biblatex/") + (base32 + "11kzvny50iklzkamr0rqd5x532q8rxny1xhmf96jl8mzj1d2zmay") + #:trivial? #t))) + (package + (inherit template) + (propagated-inputs + `(("texlive-logreq" ,texlive-logreq) + ("texlive-url" ,texlive-url))) + (home-page "https://www.ctan.org/pkg/biblatex") + (synopsis "Sophisticated bibliographies in LaTeX") + (description "BibLaTeX is a complete reimplementation of the +bibliographic facilities provided by LaTeX. Formatting of the +bibliography is entirely controlled by LaTeX macros, facilitating the +design of new bibliography and citation styles. BibLaTeX uses its own +data backend program \"biber\" to read and process the bibliographic +data. With biber, the range of features provided by biblatex +includes: + +@enumerate +@item +full unicode support, + +@item +customisable bibliography labels, + +@item +multiple bibliographies in the same document, and + +@item +subdivided bibliographies, such as bibliographies per chapter or +section. +@end enumerate\n") + (license license:lppl1.3c)))) diff --git a/gnu/packages/text-editors.scm b/gnu/packages/text-editors.scm index 22cdbfc704..18f1c00da5 100644 --- a/gnu/packages/text-editors.scm +++ b/gnu/packages/text-editors.scm @@ -155,7 +155,7 @@ based command language.") (define-public kakoune (package (name "kakoune") - (version "2020.08.04") + (version "2020.09.01") (source (origin (method url-fetch) @@ -163,7 +163,7 @@ based command language.") "releases/download/v" version "/" "kakoune-" version ".tar.bz2")) (sha256 - (base32 "08gikjxyvcr415br1g1llzh5pnq737q55yinalb92cgq3yn9yih2")))) + (base32 "0x81rxy7bqnhd9374g5ypy4w4nxmm0vnqw6b52bf62jxdg2qj6l6")))) (build-system gnu-build-system) (arguments `(#:make-flags @@ -657,24 +657,20 @@ environment with Markdown markup.") (icons-dir (string-append out "/share/pixmaps"))) (install-file "icons/Manuskript/manuskript.svg" icons-dir) (mkdir-p apps) - (with-output-to-file (string-append apps "/manuskript.desktop") - (lambda _ - (format #t - "[Desktop Entry]~@ - Name=Manuskript~@ - MimeType=application/x-manuskript-book;~@ - Exec=~a/bin/manuskript %f~@ - Comment=Tool for writers~@ - Comment[es]=Herramienta para escritores/as~@ - Keywords=manuskript;office;write;edit;novel;text;msk~@ - Terminal=false~@ - Type=Application~@ - Icon=manuskript~@ - Categories=Office;WordProcessor;~%" - out)))) + (make-desktop-entry-file (string-append apps "/manuskript.desktop") + #:name "Manuskript" + #:mime-type "application/x-manuskript-book;" + #:exec (string-append out "/bin/manuskript %f") + #:comment '((#f "Tool for writers") + ("es" "Herramienta para escritores/as")) + #:keywords "manuskript;office;write;edit;novel;text;msk" + #:terminal #f + #:type "Application" + #:icon "manuskript" + #:categories "Office;WordProcessor;")) #t)))))) (inputs - `(("ghc-pandoc" ,ghc-pandoc) + `(("pandoc" ,pandoc) ("python-lxml" ,python-lxml) ("python-markdown" ,python-markdown) ("python-pyqt" ,python-pyqt) @@ -709,7 +705,7 @@ in plain text file format.") (define-public editorconfig-core-c (package (name "editorconfig-core-c") - (version "0.12.3") + (version "0.12.4") (source (origin (method git-fetch) @@ -718,8 +714,7 @@ in plain text file format.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 - "0jkc69r4jwn4rih6h6cqvgljjc3ff49cxj8286mi515aczr48cm1")))) + (base32 "1311fhh2jfsja2hhk3nwb6nijlq03jw8dk35cwbrac0p9jvy03jx")))) (build-system cmake-build-system) (arguments '(#:phases @@ -728,17 +723,25 @@ in plain text file format.") (lambda* (#:key inputs #:allow-other-keys) (let ((tests (assoc-ref inputs "tests"))) (copy-recursively tests "tests")) - #t))))) + #t)) + (add-after 'install 'delete-static-library + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (lib (string-append out "/lib"))) + (with-directory-excursion lib + (delete-file "libeditorconfig_static.a")) + #t)))))) (native-inputs - `(("tests" ,(origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/editorconfig/editorconfig-core-test") - (commit "6ea1d8ece62cac9cf72c79dce4879b046abe1fe7"))) ; matches version - (file-name (git-file-name "editorconfig-core-test" version)) - (sha256 - (base32 - "1sf6910idnd4bgzbj8w8f9ldsbkaqa0lh6syymwy3hfqda63acj7")))))) + `(("tests" + ,(origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/editorconfig/editorconfig-core-test") + ;; The tests submodule commit matching this package's version. + (commit "48610d43b7455af12195473377f93c4ceea654f5"))) + (file-name (git-file-name "editorconfig-core-test" version)) + (sha256 + (base32 "1s29p4brmcsc3xsww3gk85dg45f1kk3iykh1air3ij0hymf5dyqy")))))) (inputs `(("pcre2" ,pcre2))) (home-page "https://editorconfig.org/") diff --git a/gnu/packages/tryton.scm b/gnu/packages/tryton.scm index 7cde0db7ea..3809b986d5 100644 --- a/gnu/packages/tryton.scm +++ b/gnu/packages/tryton.scm @@ -413,6 +413,170 @@ Template and Product.") most of accounting needs.") (license license:gpl3+))) +(define-public python-trytond-analytic-account + (package + (name "python-trytond-analytic-account") + (version "5.6.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "trytond_analytic_account" version)) + (sha256 + (base32 "02hv3mmhadz248vy4azrw8rs2mwgsixd4cnzsm82z15gjmfxl34q")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (let ((runtest + (string-append + (assoc-ref %build-inputs "python-trytond") + "/lib/python" + ,(version-major+minor (package-version python)) + "/site-packages/trytond/tests/run-tests.py"))) + (lambda* (#:key inputs outputs #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + (invoke "python" runtest "-m" "analytic_account"))))))) + (native-inputs + `(("python" ,python-minimal-wrapper) + ("python-dateutil" ,python-dateutil) + ("python-genshi" ,python-genshi) + ("python-lxml" ,python-lxml) + ("python-magic" ,python-magic) + ("python-passlib" ,python-passlib) + ("python-polib" ,python-polib) + ("python-proteus" ,python-proteus) + ("python-relatorio" ,python-relatorio) + ("python-werkzeug" ,python-werkzeug) + ("python-wrapt" ,python-wrapt))) + (propagated-inputs + `(("python-sql" ,python-sql) + ("python-trytond" ,python-trytond) + ("python-trytond-account" + ,python-trytond-account) + ("python-trytond-company" + ,python-trytond-company) + ("python-trytond-currency" + ,python-trytond-currency) + ("python-trytond-party" ,python-trytond-party))) + (home-page "https://www.tryton.org/") + (synopsis "Tryton module for analytic accounting") + (description + "This package provides a Tryton module that adds the fundamentals +required to analyse accounting using multiple different axes.") + (license license:gpl3+))) + +(define-public python-trytond-account-product + (package + (name "python-trytond-account-product") + (version "5.6.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "trytond_account_product" version)) + (sha256 + (base32 "0iyk07adixf37jlvn7n27ac12hk23zx09w4s78dr9sfp0lsf8vv8")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (let ((runtest + (string-append + (assoc-ref %build-inputs "python-trytond") + "/lib/python" + ,(version-major+minor (package-version python)) + "/site-packages/trytond/tests/run-tests.py"))) + (lambda* (#:key inputs outputs #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + (invoke "python" runtest "-m" "account_product"))))))) + (native-inputs + `(("python" ,python-minimal-wrapper) + ("python-dateutil" ,python-dateutil) + ("python-genshi" ,python-genshi) + ("python-lxml" ,python-lxml) + ("python-magic" ,python-magic) + ("python-passlib" ,python-passlib) + ("python-polib" ,python-polib) + ("python-proteus" ,python-proteus) + ("python-relatorio" ,python-relatorio) + ("python-sql" ,python-sql) + ("python-werkzeug" ,python-werkzeug) + ("python-wrapt" ,python-wrapt))) + (propagated-inputs + `(("python-trytond" ,python-trytond) + ("python-trytond-account" + ,python-trytond-account) + ("python-trytond-analytic-account" + ,python-trytond-analytic-account) + ("python-trytond-company" + ,python-trytond-company) + ("python-trytond-product" + ,python-trytond-product))) + (home-page "https://www.tryton.org/") + (synopsis "Tryton module to add accounting on product") + (description + "This package provides a Tryton module that adds accounting on product +and category.") + (license license:gpl3+))) + +(define-public python-trytond-account-invoice + (package + (name "python-trytond-account-invoice") + (version "5.6.1") + (source + (origin + (method url-fetch) + (uri (pypi-uri "trytond_account_invoice" version)) + (sha256 + (base32 "0ic5zghg50m6jwdr88y4vgzy58g1h17b63sbhh61brys1cp2dxhc")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (let ((runtest + (string-append + (assoc-ref %build-inputs "python-trytond") + "/lib/python" + ,(version-major+minor (package-version python)) + "/site-packages/trytond/tests/run-tests.py"))) + (lambda* (#:key inputs outputs #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + (invoke "python" runtest "-m" "account_invoice"))))))) + (native-inputs + `(("python" ,python-minimal-wrapper) + ("python-genshi" ,python-genshi) + ("python-lxml" ,python-lxml) + ("python-magic" ,python-magic) + ("python-passlib" ,python-passlib) + ("python-polib" ,python-polib) + ("python-proteus" ,python-proteus) + ("python-relatorio" ,python-relatorio) + ("python-werkzeug" ,python-werkzeug) + ("python-wrapt" ,python-wrapt))) + (propagated-inputs + `(("python-dateutil" ,python-dateutil) + ("python-sql" ,python-sql) + ("python-trytond" ,python-trytond) + ("python-trytond-account" + ,python-trytond-account) + ("python-trytond-account-product" + ,python-trytond-account-product) + ("python-trytond-company" + ,python-trytond-company) + ("python-trytond-currency" + ,python-trytond-currency) + ("python-trytond-party" ,python-trytond-party) + ("python-trytond-product" + ,python-trytond-product))) + (home-page "https://www.tryton.org/") + (synopsis "Tryton module for invoicing") + (description + "This package provides a Tryton module that adds the invoice, payment +term.") + (license license:gpl3+))) + (define-public python-trytond-stock (package (name "python-trytond-stock") @@ -516,6 +680,230 @@ inventory to control and update stock levels.") "This package provides a Tryton module that defines lot of products.") (license license:gpl3+))) +(define-public python-trytond-account-invoice-stock + (package + (name "python-trytond-account-invoice-stock") + (version "5.6.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri + "trytond_account_invoice_stock" + version)) + (sha256 + (base32 "1ky39ab8ax7hla5d9qgmp0p4ra4q6n29xc3wba5qdw3ij8wkn96f")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (let ((runtest + (string-append + (assoc-ref %build-inputs "python-trytond") + "/lib/python" + ,(version-major+minor (package-version python)) + "/site-packages/trytond/tests/run-tests.py"))) + (lambda* (#:key inputs outputs #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + (invoke "python" runtest "-m" "account_invoice_stock"))))))) + (native-inputs + `(("python" ,python-minimal-wrapper) + ("python-dateutil" ,python-dateutil) + ("python-genshi" ,python-genshi) + ("python-lxml" ,python-lxml) + ("python-magic" ,python-magic) + ("python-passlib" ,python-passlib) + ("python-polib" ,python-polib) + ("python-proteus" ,python-proteus) + ("python-relatorio" ,python-relatorio) + ("python-sql" ,python-sql) + ("python-werkzeug" ,python-werkzeug) + ("python-wrapt" ,python-wrapt))) + (propagated-inputs + `(("python-trytond" ,python-trytond) + ("python-trytond-account-invoice" + ,python-trytond-account-invoice) + ("python-trytond-product" + ,python-trytond-product) + ("python-trytond-stock" ,python-trytond-stock))) + (home-page "https://www.tryton.org/") + (synopsis "Tryton module to link stock and invoice") + (description + "This package provides a Tryton module that adds link between invoice +lines and stock moves. The unit price of the stock move is updated with the +average price of the posted invoice lines that are linked to it.") + (license license:gpl3+))) + +(define-public python-trytond-stock-supply + (package + (name "python-trytond-stock-supply") + (version "5.6.1") + (source + (origin + (method url-fetch) + (uri (pypi-uri "trytond_stock_supply" version)) + (sha256 + (base32 "0lw7qrg58k5pjpp3nz73rmlm8v086l49ri31ci75calm552zpfay")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (let ((runtest + (string-append + (assoc-ref %build-inputs "python-trytond") + "/lib/python" + ,(version-major+minor (package-version python)) + "/site-packages/trytond/tests/run-tests.py"))) + (lambda* (#:key inputs outputs #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + (invoke "python" runtest "-m" "stock_supply"))))))) + (native-inputs + `(("python" ,python-minimal-wrapper) + ("python-dateutil" ,python-dateutil) + ("python-genshi" ,python-genshi) + ("python-lxml" ,python-lxml) + ("python-magic" ,python-magic) + ("python-passlib" ,python-passlib) + ("python-polib" ,python-polib) + ("python-proteus" ,python-proteus) + ("python-relatorio" ,python-relatorio) + ("python-werkzeug" ,python-werkzeug) + ("python-wrapt" ,python-wrapt))) + (propagated-inputs + `(("python-sql" ,python-sql) + ("python-trytond" ,python-trytond) + ("python-trytond-account" + ,python-trytond-account) + ("python-trytond-party" ,python-trytond-party) + ("python-trytond-product" + ,python-trytond-product) + ("python-trytond-purchase" + ,python-trytond-purchase) + ("python-trytond-purchase-request" + ,python-trytond-purchase-request) + ("python-trytond-stock" ,python-trytond-stock))) + (home-page "https://www.tryton.org/") + (synopsis "Tryton module for stock supply") + (description + "This package provides a Tryton module that adds automatic supply +mechanisms and introduces the concepts of order point.") + (license license:gpl3+))) + +(define-public python-trytond-purchase + (package + (name "python-trytond-purchase") + (version "5.6.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "trytond_purchase" version)) + (sha256 + (base32 "0znjxhhwqlz4sq96ah9g28mvw4w83rhp022h6vihnz64z2ad3p3z")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (let ((runtest + (string-append + (assoc-ref %build-inputs "python-trytond") + "/lib/python" + ,(version-major+minor (package-version python)) + "/site-packages/trytond/tests/run-tests.py"))) + (lambda* (#:key inputs outputs #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + (invoke "python" runtest "-m" "purchase"))))))) + (native-inputs + `(("python" ,python-minimal-wrapper) + ("python-dateutil" ,python-dateutil) + ("python-genshi" ,python-genshi) + ("python-lxml" ,python-lxml) + ("python-magic" ,python-magic) + ("python-passlib" ,python-passlib) + ("python-polib" ,python-polib) + ("python-proteus" ,python-proteus) + ("python-relatorio" ,python-relatorio) + ("python-werkzeug" ,python-werkzeug) + ("python-wrapt" ,python-wrapt))) + (propagated-inputs + `(("python-sql" ,python-sql) + ("python-trytond" ,python-trytond) + ("python-trytond-account" + ,python-trytond-account) + ("python-trytond-account-invoice" + ,python-trytond-account-invoice) + ("python-trytond-account-invoice-stock" + ,python-trytond-account-invoice-stock) + ("python-trytond-account-product" + ,python-trytond-account-product) + ("python-trytond-company" + ,python-trytond-company) + ("python-trytond-currency" + ,python-trytond-currency) + ("python-trytond-party" ,python-trytond-party) + ("python-trytond-product" + ,python-trytond-product) + ("python-trytond-stock" ,python-trytond-stock))) + (home-page "https://www.tryton.org/") + (synopsis "Tryton module for purchase") + (description + "This package provides a Tryton module that defines the Purchase model.") + (license license:gpl3+))) + +(define-public python-trytond-purchase-request + (package + (name "python-trytond-purchase-request") + (version "5.6.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "trytond_purchase_request" version)) + (sha256 + (base32 "15r1x3jzr83rna1vfpans277785dpmgjr7989icav602nkyhhx0x")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (let ((runtest + (string-append + (assoc-ref %build-inputs "python-trytond") + "/lib/python" + ,(version-major+minor (package-version python)) + "/site-packages/trytond/tests/run-tests.py"))) + (lambda* (#:key inputs outputs #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + ;; Doctest 'scenario_purchase_request.rst' fails. + (invoke "python" runtest + "-m" "purchase_request" "--no-doctest"))))))) + (native-inputs + `(("python" ,python-minimal-wrapper) + ("python-dateutil" ,python-dateutil) + ("python-genshi" ,python-genshi) + ("python-lxml" ,python-lxml) + ("python-magic" ,python-magic) + ("python-passlib" ,python-passlib) + ("python-polib" ,python-polib) + ("python-proteus" ,python-proteus) + ("python-relatorio" ,python-relatorio) + ("python-sql" ,python-sql) + ("python-werkzeug" ,python-werkzeug) + ("python-wrapt" ,python-wrapt))) + (propagated-inputs + `(("python-trytond" ,python-trytond) + ("python-trytond-product" + ,python-trytond-product) + ("python-trytond-purchase" + ,python-trytond-purchase))) + (home-page "https://www.tryton.org/") + (synopsis "Tryton module for purchase requests") + (description + "This package provides a Tryton module that introduces the concept of +Purchase Requests which are central points to collect purchase requests +generated by other process from Tryton.") + (license license:gpl3+))) + (define-public python-proteus (package (name "python-proteus") diff --git a/gnu/packages/version-control.scm b/gnu/packages/version-control.scm index 3b23e8b873..2ee8247071 100644 --- a/gnu/packages/version-control.scm +++ b/gnu/packages/version-control.scm @@ -30,6 +30,7 @@ ;;; Copyright © 2020 John D. Boy <jboy@bius.moe> ;;; Copyright © 2020 Jan (janneke) Nieuwenhuizen <janneke@gnu.org> ;;; Copyright © 2020 Vinicius Monego <monego@posteo.net> +;;; Copyright © 2020 Tanguy Le Carrour <tanguy@bioneland.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -52,6 +53,7 @@ #:use-module (guix packages) #:use-module (guix download) #:use-module (guix git-download) + #:use-module (guix hg-download) #:use-module (guix build-system cmake) #:use-module (guix build-system gnu) #:use-module (guix build-system go) @@ -1444,7 +1446,7 @@ control to Git repositories.") (define-public pre-commit (package (name "pre-commit") - (version "2.6.0") + (version "2.7.1") (source (origin ;; No tests in the PyPI tarball. @@ -1454,7 +1456,7 @@ control to Git repositories.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "144hcnz8vz07nkx7hk8a3ac822186ardwxa8jnl6s8qvm5ip92f2")))) + (base32 "0n7qby5a4yz3s02nqcp5js6jg9wrd0x7msblxwb1883ds4b2b71a")))) (build-system python-build-system) (arguments `(#:phases @@ -1490,7 +1492,7 @@ control to Git repositories.") " and not test_run_a_ruby_hook" " and not test_run_ruby_hook_with_disable_shared_gems" " and not test_run_versioned_ruby_hook" - ;; Disable Cargo tests + ;; Disable Cargo tests. " and not test_additional_rust_cli_dependencies_installed" " and not test_additional_rust_lib_dependencies_installed" " and not test_local_rust_additional_dependencies" @@ -1517,14 +1519,14 @@ control to Git repositories.") " and not test_too_new_version" " and not test_try_repo_uncommitted_changes" " and not test_versions_ok" - ;; This test tries to activate a virtualenv + ;; This test tries to activate a virtualenv. " and not test_healthy_venv_creator" ;; Fatal error: Not a Git repository. " and not test_all_cmds" " and not test_try_repo" - ;; No module named 'pip._internal.cli.main' + ;; No module named 'pip._internal.cli.main'. " and not test_additional_dependencies_roll_forward" - ; Assertion errors + ;; Assertion errors. " and not test_install_existing_hooks_no_overwrite" " and not test_uninstall_restores_legacy_hooks")))) (add-before 'reset-gzip-timestamps 'make-files-writable @@ -1536,7 +1538,7 @@ control to Git repositories.") (find-files out "\\.gz$")) #t)))))) (native-inputs - `(("git" ,git) + `(("git" ,git-minimal) ("python-pytest" ,python-pytest))) (inputs `(("python-cfgv" ,python-cfgv) @@ -1553,40 +1555,17 @@ specify a list of hooks you want and pre-commit manages the installation and execution of any hook written in any language before every commit.") (license license:expat))) -(define (mercurial-patch name revision hash) - (origin - (method url-fetch) - (uri (string-append "https://www.mercurial-scm.org/repo/hg/raw-rev/" revision)) - (file-name (string-append "mercurial-" name ".patch")) - (sha256 (base32 hash)))) - -(define %mercurial-patches - (list - ;; These three patches fixes compatibility with the updated gzip module - ;; in Python 3.8.2: <https://bz.mercurial-scm.org/show_bug.cgi?id=6284>. - (mercurial-patch "python-mtime" "6c36a521572edf3a79ee567b118469b3192037cc" - "0bmm7y40r8s081ws2sjvn1v8kvyfan4a97jl0fhdh7yc2pzxlzqq") - (mercurial-patch "indent-gzip" "a23b859ad17dd0a5b9bb37846b69b5e30f99c44c" - "1spscv9dgqv38m7h1liki93ax6w97gxayg17fr7wr6acjdfccpr9") - (mercurial-patch "python-gzip" "b7ca03dff14c63d64ad7bfa36a2d0a36a6b62253" - "0p88ffhx0kk21ssrsb156ffhpcb7g8mkwwkmq49qpmbm5ag2paf0") - ;; This fixes an incompatibility with os.isfile in Python 3.8: - ;; <https://bz.mercurial-scm.org/show_bug.cgi?id=6287>. - (mercurial-patch "os-isfile" "6a8738dc4a019da4c9df5c26961aa09d45ce1c68" - "0lr069m12kzrkmr1pmhaxg5lxmdwxabsza61qp1i1q70g7sy8lvy"))) - (define-public mercurial (package (name "mercurial") - (version "5.3.1") + (version "5.5.1") (source (origin (method url-fetch) (uri (string-append "https://www.mercurial-scm.org/" "release/mercurial-" version ".tar.gz")) - (patches %mercurial-patches) (sha256 (base32 - "1nbjpzjrzgql4hrvslpxwbcgn885ikq6ba1yb4w6p78rw9nzkhgp")))) + "0x08yjs26j88kh1bvl2g3r24lnfc023ry3i1cxfq6haray6sv5ag")))) (build-system python-build-system) (arguments `(#:phases @@ -1615,6 +1594,13 @@ execution of any hook written in any language before every commit.") ;; not in 'guix environment -C' (even without /bin/sh)? "test-nointerrupt.t" + ;; FIXME: This gets killed but does not receive an interrupt. + "test-commandserver.t" + + ;; Only works when run in a hg-repo, not in an + ;; extracted tarball + "test-doctest.py" + ;; TODO: the fqaddr() call fails in the build ;; container, causing these server tests to fail. "test-hgwebdir.t" @@ -1650,6 +1636,32 @@ It efficiently handles projects of any size and offers an easy and intuitive interface.") (license license:gpl2+))) +(define-public python-hg-evolve + (package + (name "python-hg-evolve") + (version "10.0.1") + (source + (origin + (method hg-fetch) + (uri (hg-reference + (url "https://www.mercurial-scm.org/repo/evolve") + (changeset version))) + (file-name (string-append name "-" version "-checkout")) + (sha256 + (base32 + "1lz407373lfam9n02gq0l0rc2sjvn0m96kbzy93ipia3ika8fa68")))) + (build-system python-build-system) + (arguments + ;; Tests need mercurial source code. + '(#:tests? #f)) + (propagated-inputs + `(("mercurial" ,mercurial))) + (home-page "https://www.mercurial-scm.org/doc/evolution/") + (synopsis "Flexible evolution of Mercurial history") + (description "Evolve is a Mercurial extension for faster and safer mutable +history. It implements the changeset evolution concept for Mercurial.") + (license license:gpl2))) + (define-public neon (package (name "neon") @@ -2591,6 +2603,12 @@ interrupted, published, and collaborated on while in progress.") #:install-source? #f #:phases (modify-phases %standard-phases + (add-before 'build 'man-gen + ;; Without this, the binary generated in 'build + ;; phase won't have any embedded usage-text. + (lambda _ + (with-directory-excursion "src/github.com/git-lfs/git-lfs" + (invoke "make" "mangen")))) (add-after 'build 'build-man-pages (lambda _ (with-directory-excursion "src/github.com/git-lfs/git-lfs" diff --git a/gnu/packages/video.scm b/gnu/packages/video.scm index 2333536f82..8ebe7dbcdf 100644 --- a/gnu/packages/video.scm +++ b/gnu/packages/video.scm @@ -524,7 +524,7 @@ applications by providing high-level classes for commonly required tasks.") (define-public libde265 (package (name "libde265") - (version "1.0.5") + (version "1.0.6") (source (origin (method git-fetch) @@ -534,7 +534,7 @@ applications by providing high-level classes for commonly required tasks.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "1qisj8ryzbknam3hk81rq70fsd9mcpxm898bqygvbsmbwyvmz3pg")))) + (base32 "0ipccyavlgf7hfzx1g8bvzg62xq10vcxvwgq70r3z3j6mdvmrzjp")))) (build-system gnu-build-system) (arguments `(#:configure-flags @@ -1001,7 +1001,7 @@ H.264 (MPEG-4 AVC) video streams.") (define-public straw-viewer (package (name "straw-viewer") - (version "0.0.6") + (version "0.0.7") (source (origin (method git-fetch) @@ -1010,8 +1010,7 @@ H.264 (MPEG-4 AVC) video streams.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 - "0a9g10r56jdm2jx2yg9i8j8nczq74x78c29bhannr7ybnm2r6w2a")))) + (base32 "11ywip9ck2rgyj8s1pyr6za3si0bnx8rl2f3cv84xgcq36ac3rv4")))) (build-system perl-build-system) (native-inputs `(("perl-module-build" ,perl-module-build) @@ -2166,7 +2165,7 @@ To load this plugin, specify the following option when starting mpv: (define-public youtube-dl (package (name "youtube-dl") - (version "2020.07.28") + (version "2020.09.14") (source (origin (method url-fetch) (uri (string-append "https://github.com/ytdl-org/youtube-dl/" @@ -2174,7 +2173,7 @@ To load this plugin, specify the following option when starting mpv: version ".tar.gz")) (sha256 (base32 - "1if7xyi7g9rpni1jbs7gv5m12s34qdb15dpfbbjn8120h16y7cqz")))) + "18wfhprbaszpxgqkac3hb050ngvdsaibbcifg88rkv5vc6bc2mq6")))) (build-system python-build-system) (arguments ;; The problem here is that the directory for the man page and completion @@ -2353,7 +2352,7 @@ audio, images) from the Web. It can use either mpv or vlc for playback.") (define-public youtube-viewer (package (name "youtube-viewer") - (version "3.7.7") + (version "3.7.8") (source (origin (method git-fetch) (uri (git-reference @@ -2362,7 +2361,7 @@ audio, images) from the Web. It can use either mpv or vlc for playback.") (file-name (git-file-name name version)) (sha256 (base32 - "1gc1b1zm55w2w62ayc6k51l31fswk17b072lpbq65is3ngjg6c98")))) + "1ckzzf35nbwlx5prvzjr52n28chyd479vhdk5w7vb2343az80mzi")))) (build-system perl-build-system) (native-inputs `(("perl-module-build" ,perl-module-build))) @@ -2737,7 +2736,7 @@ capabilities.") (define-public vapoursynth (package (name "vapoursynth") - (version "49") + (version "52") (source (origin (method git-fetch) (uri (git-reference @@ -2746,7 +2745,7 @@ capabilities.") (file-name (git-file-name name version)) (sha256 (base32 - "1d298mlb24nlc2x7pixfbkd0qbpv4c706c32idsgpi96z1spkhvl")))) + "1krfdzc2x2vxv4nq9kiv1c09hgj525qn120ah91fw2ikq8ldvmx4")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) @@ -4441,16 +4440,16 @@ transcode or reformat the videos in any way, producing perfect backups.") (define-public svt-av1 (package (name "svt-av1") - (version "0.8.4") - (source (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/OpenVisualCloud/SVT-AV1") - (commit (string-append "v" version)))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "0xad35q9sv5w0iihcf9q1f1m7br5anl3vsyx9svnx128iqf0n997")))) + (version "0.8.5") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/OpenVisualCloud/SVT-AV1") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1gfxdmdql090p7c8ln1z344g467l41p45287lmwy590hv8gw6bfg")))) (build-system cmake-build-system) ;; SVT-AV1 only supports Intel-compatible CPUs. (supported-systems '("x86_64-linux" "i686-linux")) diff --git a/gnu/packages/vim.scm b/gnu/packages/vim.scm index 01ebda6cfe..083f9da3a4 100644 --- a/gnu/packages/vim.scm +++ b/gnu/packages/vim.scm @@ -570,7 +570,7 @@ are detected, the user is notified.") (define-public editorconfig-vim (package (name "editorconfig-vim") - (version "0.3.3") + (version "1.1.1") (source (origin (method git-fetch) @@ -580,27 +580,13 @@ are detected, the user is notified.") (file-name (git-file-name name version)) (sha256 (base32 - "0vssfl1wjq0mv0p30c3dszwrh4yy90vwxmmdgqaxf5rykik7bdfd")) - (modules '((guix build utils))) - (snippet - '(begin - (delete-file-recursively "plugin/editorconfig-core-py") #t)))) + "0mp80bi2m56bb93szw87vy6q5s85yk9g91sl4pr51316rgdv5kkv")))) (build-system copy-build-system) (arguments - '(#:phases - (modify-phases %standard-phases - (add-after 'unpack 'patch-editorconfig-path - (lambda* (#:key inputs #:allow-other-keys) - (let ((editorconfig (assoc-ref inputs "editorconfig-core"))) - (substitute* "plugin/editorconfig.vim" - (("/opt") editorconfig)) - #t)))) - #:install-plan + '(#:install-plan '(("autoload" "share/vim/vimfiles/") ("doc" "share/vim/vimfiles/") ("plugin" "share/vim/vimfiles/")))) - (inputs - `(("editorconfig-core" ,editorconfig-core-c))) (home-page "https://editorconfig.org/") (synopsis "EditorConfig plugin for Vim") (description "EditorConfig makes it easy to maintain the correct coding diff --git a/gnu/packages/virtualization.scm b/gnu/packages/virtualization.scm index dbd165dbfc..8e634ba6c6 100644 --- a/gnu/packages/virtualization.scm +++ b/gnu/packages/virtualization.scm @@ -679,7 +679,7 @@ server and embedded PowerPC, and S390 guests.") ;; For the documentation. ("python-docutils" ,python-docutils) ("sphinx" ,python-sphinx) - ("pandoc" ,ghc-pandoc) + ("pandoc" ,pandoc) ("dot" ,graphviz) ;; Test dependencies. @@ -1995,14 +1995,14 @@ administrators and developers in managing the database.") (define-public osinfo-db (package (name "osinfo-db") - (version "20200529") + (version "20200813") (source (origin (method url-fetch) (uri (string-append "https://releases.pagure.org/libosinfo/osinfo-db-" version ".tar.xz")) (sha256 (base32 - "0mbrf9j5wmjhc6jixvhp4jqyxixh1717lqrmzmipdg99xnzba81n")))) + "127lr4kvdy2b2lil7i0gbbxcf8vap0r6hxhnbmms4p7h2h0sdgri")))) (build-system trivial-build-system) (arguments `(#:modules ((guix build utils)) diff --git a/gnu/packages/vpn.scm b/gnu/packages/vpn.scm index 2378e4ff2e..c704106221 100644 --- a/gnu/packages/vpn.scm +++ b/gnu/packages/vpn.scm @@ -53,6 +53,7 @@ #:use-module (gnu packages guile) #:use-module (gnu packages libevent) #:use-module (gnu packages linux) + #:use-module (gnu packages ncurses) #:use-module (gnu packages nss) #:use-module (gnu packages perl) #:use-module (gnu packages pkg-config) @@ -321,7 +322,7 @@ traversing network address translators (@dfn{NAT}s) and firewalls.") (define-public protonvpn-cli (package (name "protonvpn-cli") - (version "2.2.2") + (version "2.2.4") (source (origin ;; PyPI has a ".whl" file but not a proper source release. @@ -333,7 +334,7 @@ traversing network address translators (@dfn{NAT}s) and firewalls.") (file-name (git-file-name name version)) (sha256 (base32 - "0ixjb02kj4z79whm1izd8mrn2h0rp9cmw4im1qvp93rahqxdd4n8")))) + "08yca0a0prrnrc7ir7ajd56yxvxpcs4m1k8f5kf273f5whgr7wzw")))) (build-system python-build-system) (arguments '(#:tests? #f)) ; no tests in repo (native-inputs @@ -342,7 +343,8 @@ traversing network address translators (@dfn{NAT}s) and firewalls.") `(("pythondialog" ,python-pythondialog) ("requests" ,python-requests))) (propagated-inputs - `(("openvpn" ,openvpn))) + `(("openvpn" ,openvpn) + ("dialog" ,dialog))) (synopsis "Command-line client for ProtonVPN") (description "This is the official command-line interface for ProtonVPN, a secure @@ -556,7 +558,7 @@ WireGuard was added to Linux 5.6.") (define-public wireguard-tools (package (name "wireguard-tools") - (version "1.0.20200820") + (version "1.0.20200827") (source (origin (method git-fetch) @@ -565,7 +567,7 @@ WireGuard was added to Linux 5.6.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "1n8gxms0hmialm5zgh51bhbrl4fndxfc9vfwj20grp9fr7r6vzc4")))) + (base32 "1h351hn531z6z85sx9ya27xjz1jszgn1pkwibacjj49mds15f7gn")))) (build-system gnu-build-system) (arguments `(#:make-flags diff --git a/gnu/packages/web-browsers.scm b/gnu/packages/web-browsers.scm index e7a62ddb80..205538ee27 100644 --- a/gnu/packages/web-browsers.scm +++ b/gnu/packages/web-browsers.scm @@ -457,129 +457,130 @@ driven and does not detract you from your daily work.") (license license:gpl3+))) (define-public nyxt - ;; 1.5.0 does not build anymore, let's use the master which is more stable anyways. - (let ((commit "9440980a9c5f75232b08ca98183b22be4a3d9bc3")) - (package - (name "nyxt") - (version (git-version "1.5.0" "1" commit)) - (source - (origin - (method git-fetch) - (uri (git-reference - ;; TODO: Mirror seems to hang, let's fallback to GitHub for now. - ;; (url "https://source.atlas.engineer/public/nyxt") - (url "https://github.com/atlas-engineer/nyxt") - (commit commit))) - (sha256 - (base32 - "079n5ffsa8136i9ik5mn4rwa3iv0avncw6y973gj3hlf8sf4wv7g")) - (file-name (git-file-name "nyxt" version)))) - (build-system gnu-build-system) - (arguments - `(#:make-flags (list "nyxt" "NYXT_INTERNAL_QUICKLISP=false" - (string-append "DESTDIR=" (assoc-ref %outputs "out")) - "PREFIX=") - #:strip-binaries? #f ; Stripping breaks SBCL binaries. - #:phases - (modify-phases %standard-phases - (add-after 'unpack 'patch-version ; Version is guessed from .git which Guix does not have. - (lambda* (#:key inputs #:allow-other-keys) - (let ((version (format #f "~a" ,version))) - (substitute* "source/global.lisp" - (("version\\)\\)\\)") - (string-append "version)))" - "\n" - "(setf +version+ \"" version "\")")))) - #t)) - (add-before 'build 'make-desktop-version-number - (lambda _ - (with-output-to-file "version" - (lambda _ - (format #t "~a" ,version))))) + (package + (name "nyxt") + ;; Package the pre-release because latest stable 1.5.0 does not build + ;; anymore. + (version "2-pre-release-1") + (source + (origin + (method git-fetch) + (uri (git-reference + ;; TODO: Mirror seems to hang, let's fallback to GitHub for now. + ;; (url "https://source.atlas.engineer/public/nyxt") + (url "https://github.com/atlas-engineer/nyxt") + (commit version))) + (sha256 + (base32 + "0aipsmzqnlkmy001cihz2jnc0hja8c10rm08jycxr05j3gx3qsxd")) + (file-name (git-file-name "nyxt" version)))) + (build-system gnu-build-system) + (arguments + `(#:make-flags (list "nyxt" "NYXT_INTERNAL_QUICKLISP=false" + (string-append "DESTDIR=" (assoc-ref %outputs "out")) + "PREFIX=") + #:strip-binaries? #f ; Stripping breaks SBCL binaries. + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'patch-version ; Version is guessed from .git which Guix does not have. + (lambda* (#:key inputs #:allow-other-keys) + (let ((version (format #f "~a" ,version)) + (file "source/global.lisp")) + (chmod file #o666) + (let ((port (open-file file "a"))) + (format port "(setf +version+ ~s)" version) + (close-port port))) + #t)) + (add-before 'build 'make-desktop-version-number + (lambda _ + (with-output-to-file "version" + (lambda _ + (format #t "~a" ,version) + #t)))) - (delete 'configure) - (add-before 'build 'fix-common-lisp-cache-folder - (lambda _ - (setenv "HOME" "/tmp") - #t)) - (add-after 'install 'wrap-program - (lambda* (#:key inputs outputs #:allow-other-keys) - (let* ((bin (string-append (assoc-ref outputs "out") "/bin/nyxt")) - (glib-networking (assoc-ref inputs "glib-networking")) - (libs '("gsettings-desktop-schemas")) - (path (string-join - (map (lambda (lib) - (string-append (assoc-ref inputs lib) "/lib")) - libs) - ":")) - (gi-path (string-join - (map (lambda (lib) - (string-append (assoc-ref inputs lib) "/lib/girepository-1.0")) - libs) - ":")) - (xdg-path (string-join - (map (lambda (lib) - (string-append (assoc-ref inputs lib) "/share")) - libs) - ":"))) - (wrap-program bin - `("GIO_EXTRA_MODULES" prefix - (,(string-append glib-networking "/lib/gio/modules"))) - `("GI_TYPELIB_PATH" prefix (,gi-path)) - `("LD_LIBRARY_PATH" ":" prefix (,path)) - `("XDG_DATA_DIRS" ":" prefix (,xdg-path))) - #t)))))) - (native-inputs - `(("prove" ,sbcl-prove) - ("sbcl" ,sbcl))) - (inputs - ;; We need to avoid sbcl-* inputs (sbcl-cl-cffi-gtk in particular) as they - ;; seem to cause Nyxt to hang into a hogging process in about 10 minutes. - ;; Probably an issue between CFFI and how we build SBCL packages. - ;; See https://github.com/atlas-engineer/nyxt/issues/680. - `(("alexandria" ,cl-alexandria) - ("bordeaux-threads" ,cl-bordeaux-threads) - ("cl-containers" ,cl-containers) - ("cl-css" ,cl-css) - ("cl-json" ,cl-json) - ("cl-markup" ,cl-markup) - ("cl-ppcre" ,cl-ppcre) - ("cl-prevalence" ,cl-prevalence) - ("closer-mop" ,cl-closer-mop) - ("cluffer" ,cl-cluffer) - ("dexador" ,cl-dexador) - ("enchant" ,cl-enchant) - ("fset" ,cl-fset) - ("iolib" ,cl-iolib) - ("local-time" ,cl-local-time) - ("log4cl" ,cl-log4cl) - ("lparallel" ,cl-lparallel) - ("mk-string-metrics" ,cl-mk-string-metrics) - ("moptilities" ,cl-moptilities) - ("osicat" ,sbcl-osicat) ; SBCL version needed for libosicat.so. - ("parenscript" ,cl-parenscript) - ("plump" ,cl-plump) - ("quri" ,cl-quri) - ("serapeum" ,cl-serapeum) - ("str" ,cl-str) - ("swank" ,cl-slime-swank) - ("trivia" ,cl-trivia) - ("trivial-clipboard" ,cl-trivial-clipboard) - ("trivial-features" ,cl-trivial-features) - ("trivial-package-local-nicknames" ,cl-trivial-package-local-nicknames) - ("trivial-types" ,cl-trivial-types) - ("unix-opts" ,cl-unix-opts) - ;; WebKitGTK deps - ("cl-cffi-gtk" ,cl-cffi-gtk) - ("cl-webkit" ,cl-webkit) - ("glib-networking" ,glib-networking) - ("gsettings-desktop-schemas" ,gsettings-desktop-schemas))) - (synopsis "Extensible web-browser in Common Lisp") - (home-page "https://nyxt.atlas.engineer") - (description "Nyxt is a keyboard-oriented, extensible web-browser + (delete 'configure) + (add-before 'build 'fix-common-lisp-cache-folder + (lambda _ + (setenv "HOME" "/tmp") + #t)) + (add-after 'install 'wrap-program + (lambda* (#:key inputs outputs #:allow-other-keys) + (let* ((bin (string-append (assoc-ref outputs "out") "/bin/nyxt")) + (glib-networking (assoc-ref inputs "glib-networking")) + (libs '("gsettings-desktop-schemas")) + (path (string-join + (map (lambda (lib) + (string-append (assoc-ref inputs lib) "/lib")) + libs) + ":")) + (gi-path (string-join + (map (lambda (lib) + (string-append (assoc-ref inputs lib) "/lib/girepository-1.0")) + libs) + ":")) + (xdg-path (string-join + (map (lambda (lib) + (string-append (assoc-ref inputs lib) "/share")) + libs) + ":"))) + (wrap-program bin + `("GIO_EXTRA_MODULES" prefix + (,(string-append glib-networking "/lib/gio/modules"))) + `("GI_TYPELIB_PATH" prefix (,gi-path)) + `("LD_LIBRARY_PATH" ":" prefix (,path)) + `("XDG_DATA_DIRS" ":" prefix (,xdg-path))) + #t)))))) + (native-inputs + `(("prove" ,sbcl-prove) + ("sbcl" ,sbcl))) + (inputs + ;; We need to avoid sbcl-* inputs (sbcl-cl-cffi-gtk in particular) as they + ;; seem to cause Nyxt to hang into a hogging process in about 10 minutes. + ;; Probably an issue between CFFI and how we build SBCL packages. + ;; See https://github.com/atlas-engineer/nyxt/issues/680. + `(("alexandria" ,cl-alexandria) + ("bordeaux-threads" ,cl-bordeaux-threads) + ("cl-containers" ,cl-containers) + ("cl-css" ,cl-css) + ("cl-json" ,cl-json) + ("cl-markup" ,cl-markup) + ("cl-ppcre" ,cl-ppcre) + ("cl-prevalence" ,cl-prevalence) + ("closer-mop" ,cl-closer-mop) + ("cluffer" ,cl-cluffer) + ("dexador" ,cl-dexador) + ("enchant" ,cl-enchant) + ("fset" ,cl-fset) + ("iolib" ,cl-iolib) + ("local-time" ,cl-local-time) + ("log4cl" ,cl-log4cl) + ("lparallel" ,cl-lparallel) + ("mk-string-metrics" ,cl-mk-string-metrics) + ("moptilities" ,cl-moptilities) + ("osicat" ,sbcl-osicat) ; SBCL version needed for libosicat.so. + ("parenscript" ,cl-parenscript) + ("plump" ,cl-plump) + ("quri" ,cl-quri) + ("serapeum" ,cl-serapeum) + ("str" ,cl-str) + ("swank" ,cl-slime-swank) + ("trivia" ,cl-trivia) + ("trivial-clipboard" ,cl-trivial-clipboard) + ("trivial-features" ,cl-trivial-features) + ("trivial-package-local-nicknames" ,cl-trivial-package-local-nicknames) + ("trivial-types" ,cl-trivial-types) + ("unix-opts" ,cl-unix-opts) + ;; WebKitGTK deps + ("cl-cffi-gtk" ,cl-cffi-gtk) + ("cl-webkit" ,cl-webkit) + ("glib-networking" ,glib-networking) + ("gsettings-desktop-schemas" ,gsettings-desktop-schemas))) + (synopsis "Extensible web-browser in Common Lisp") + (home-page "https://nyxt.atlas.engineer") + (description "Nyxt is a keyboard-oriented, extensible web-browser designed for power users. The application has familiar Emacs and VI key-bindings and is fully configurable and extensible in Common Lisp.") - (license license:bsd-3)))) + (license license:bsd-3))) (define-public next (deprecated-package "next" nyxt)) diff --git a/gnu/packages/web.scm b/gnu/packages/web.scm index b674019b8f..473fe2ff97 100644 --- a/gnu/packages/web.scm +++ b/gnu/packages/web.scm @@ -196,7 +196,7 @@ and its related documentation.") (define-public mod-wsgi (package (name "mod-wsgi") - (version "4.5.22") + (version "4.7.1") (source (origin (method git-fetch) (uri (git-reference @@ -205,7 +205,7 @@ and its related documentation.") (file-name (git-file-name name version)) (sha256 (base32 - "1q90xw2cbhka5gcd6yc69iir73x4gm7fm75qpkins2ryfl6w1q3f")))) + "1savh6h3qds20mwn1nqasmqzcp57pdhfc9v4b4k78d6q28y0r17s")))) (build-system gnu-build-system) (arguments '(#:tests? #f ; TODO: can't figure out if there are tests @@ -1675,7 +1675,7 @@ minimum to provide high performance operation.") (package (name "libsass") ;; When updating, check whether sassc/libsass-3.5 is still needed. - (version "3.6.3") + (version "3.6.4") (source (origin (method git-fetch) (uri (git-reference @@ -1684,7 +1684,7 @@ minimum to provide high performance operation.") (file-name (git-file-name name version)) (sha256 (base32 - "1vn0q343d1vxz5q0xb6f9dzjah8z6j0s6x0lwvwdd55xa8z7rsnh")))) + "0r8lfqvr3rjhjd8r036zd1wc9q17gyiskppcw9m13jks9an7xp4j")))) (build-system gnu-build-system) (arguments `(#:phases @@ -4455,8 +4455,8 @@ CDF, Atom 0.3, and Atom 1.0 feeds.") (package-with-python2 python-feedparser)) (define-public guix-data-service - (let ((commit "ab68b0fdb3efe68f1962b7b9698ffc225abfeabb") - (revision "20")) + (let ((commit "c596a1c6a90bb2fe07da5339b8dc832b81d94194") + (revision "21")) (package (name "guix-data-service") (version (string-append "0.0.1-" revision "." (string-take commit 7))) @@ -4468,7 +4468,7 @@ CDF, Atom 0.3, and Atom 1.0 feeds.") (file-name (git-file-name name version)) (sha256 (base32 - "0imbkrm46ykjip81cbf14gc6hqlgi79fnwvsjxbhkd2wq3c1nrjg")))) + "09gn2imhh3aqkzray0xgkz7slriy567inh5lpkxm74bgmx862g3g")))) (build-system gnu-build-system) (arguments '(#:modules ((guix build utils) @@ -4531,6 +4531,7 @@ CDF, Atom 0.3, and Atom 1.0 feeds.") ("guile-fibers" ,guile3.0-fibers) ("guile-json" ,guile3.0-json) ("guile-email" ,guile3.0-email) + ("guile-prometheus" ,guile-prometheus) ("guile-squee" ,guile3.0-squee) ("ephemeralpg" ,ephemeralpg) ("util-linux" ,util-linux) @@ -5026,7 +5027,7 @@ written in C. It is developed as part of the NetSurf project.") (define-public libcyaml (package (name "libcyaml") - (version "1.0.1") + (version "1.1.0") (source (origin (method git-fetch) @@ -5035,7 +5036,7 @@ written in C. It is developed as part of the NetSurf project.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "0h5ydyqdl8kzh526np3jsi0pm7ks16nh1hjkdsjcd6pacw7y6i6z")))) + (base32 "0428p0rwq71nhh5nzcbapsbrjxa0x5l6h6ns32nxv7j624f0zd93")))) (build-system gnu-build-system) (arguments `(#:make-flags diff --git a/gnu/packages/wget.scm b/gnu/packages/wget.scm index d7ac9e0c12..7950b3b729 100644 --- a/gnu/packages/wget.scm +++ b/gnu/packages/wget.scm @@ -3,7 +3,7 @@ ;;; Copyright © 2014, 2015, 2017, 2018 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2016, 2017, 2019, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2017 Rutger Helling <rhelling@mykolab.com> -;;; Copyright © 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2018, 2019, 2020 Tobias Geerinckx-Rice <me@tobias.gr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -76,15 +76,15 @@ in downloaded documents to relative links.") (define-public wgetpaste (package (name "wgetpaste") - (version "2.29") + (version "2.30") (source (origin (method url-fetch) - (uri (string-append "http://wgetpaste.zlin.dk/wgetpaste-" + (uri (string-append "https://wgetpaste.zlin.dk/wgetpaste-" version ".tar.bz2")) (sha256 - (base32 - "1rp0wxr3zy7y2xp3azaadfghrx7g0m138f9qg6icjxkkz4vj9r22")))) + (base32 "14k5i6j6f34hcf9gdb9cnvfwscn0ys2dgd73ci421wj9zzqkbv73")) + (patches (search-patches "wgetpaste-update-bpaste.patch")))) (build-system gnu-build-system) (arguments `(#:modules ((guix build gnu-build-system) @@ -94,12 +94,12 @@ in downloaded documents to relative links.") (modify-phases %standard-phases (delete 'configure) (delete 'build) - (add-after 'unpack 'remove-dead-paste-site - ;; This phase is adaped from the following patch: - ;; https://gitweb.gentoo.org/repo/gentoo.git/tree/app-text/wgetpaste/files/wgetpaste-remove-dead.patch + (add-after 'unpack 'change-unfriendly-default (lambda _ (substitute* "wgetpaste" - (("-bpaste") "-dpaste")) ; dpaste blocks tor users + ;; dpaste blocks Tor users. Use a better default. + (("DEFAULT_SERVICE:-dpaste") + "DEFAULT_SERVICE-bpaste")) #t)) (replace 'install (lambda* (#:key outputs #:allow-other-keys) @@ -128,7 +128,7 @@ in downloaded documents to relative links.") (inputs `(("wget" ,wget) ("xclip" ,xclip))) - (home-page "http://wgetpaste.zlin.dk/") + (home-page "https://wgetpaste.zlin.dk/") (synopsis "Script that automates pasting to a number of pastebin services") (description "@code{wgetpaste} is an extremely simple command-line interface to various diff --git a/gnu/packages/wm.scm b/gnu/packages/wm.scm index bb5a91a230..15fbf43ec7 100644 --- a/gnu/packages/wm.scm +++ b/gnu/packages/wm.scm @@ -655,7 +655,8 @@ desktop environment.") "xmonad-" version ".tar.gz")) (sha256 (base32 - "0a7rh21k9y6g8fwkggxdxjns2grvvsd5hi2ls4klmqz5xvk4hyaa")))) + "0a7rh21k9y6g8fwkggxdxjns2grvvsd5hi2ls4klmqz5xvk4hyaa")) + (patches (search-patches "xmonad-dynamic-linking.patch")))) (build-system haskell-build-system) (inputs `(("ghc-extensible-exceptions" ,ghc-extensible-exceptions) diff --git a/gnu/packages/xdisorg.scm b/gnu/packages/xdisorg.scm index 5d7b39451c..44f903ccb0 100644 --- a/gnu/packages/xdisorg.scm +++ b/gnu/packages/xdisorg.scm @@ -39,6 +39,7 @@ ;;; Copyright © 2020 Alex McGrath <amk@amk.ie> ;;; Copyright © 2020 Ivan Kozlov <kanichos@yandex.ru> ;;; Copyright © 2020 Brett Gilio <brettg@gnu.org> +;;; Copyright © 2020 Gabriel Arazas <foo.dogsquared@gmail.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -1084,7 +1085,7 @@ Escape key when Left Control is pressed and released on its own.") (define-public libwacom (package (name "libwacom") - (version "1.4") + (version "1.5") (source (origin (method url-fetch) (uri (string-append @@ -1092,7 +1093,7 @@ Escape key when Left Control is pressed and released on its own.") "libwacom-" version "/libwacom-" version ".tar.bz2")) (sha256 (base32 - "1rk661cymmahak9rw0wcssnfszbngq74vp7zc2cwyg6yrjbif1lh")))) + "0yyl6vzpfd7dq8a8k9dn8r494542ci4r1i0pillg1p4f7jvryd3b")))) (build-system glib-or-gtk-build-system) (arguments `(#:configure-flags '("--disable-static"))) @@ -1453,7 +1454,7 @@ connectivity of the X server running on a particular @code{DISPLAY}.") (define-public rofi (package (name "rofi") - (version "1.5.4") + (version "1.6.0") (source (origin (method url-fetch) (uri (string-append "https://github.com/DaveDavenport/rofi/" @@ -1461,13 +1462,14 @@ connectivity of the X server running on a particular @code{DISPLAY}.") version "/rofi-" version ".tar.xz")) (sha256 (base32 - "1nslmyqyzhfr4hxd4llqkkkb8ap8apkdna32rllvar7r576059ci")))) + "0566b499lbpfb1gk4p17iw78ywmk9l2jww1kqjbdanrl22hai1y4")))) (build-system gnu-build-system) (inputs `(("pango" ,pango) ("cairo" ,cairo) ("glib" ,glib) ("startup-notification" ,startup-notification) + ("libjpeg" ,libjpeg-turbo) ("librsvg" ,librsvg) ("libxkbcommon" ,libxkbcommon) ("libxcb" ,libxcb) diff --git a/gnu/packages/xml.scm b/gnu/packages/xml.scm index e49cb104a3..e482312f3c 100644 --- a/gnu/packages/xml.scm +++ b/gnu/packages/xml.scm @@ -23,6 +23,7 @@ ;;; Copyright © 2018 Jack Hill <jackhill@jackhill.us> ;;; Copyright © 2019 Giacomo Leidi <goodoldpaul@autistici.org> ;;; Copyright © 2020 Paul Garlick <pgarlick@tourbillion-technology.com> +;;; Copyright © 2020 Edouard Klein <edk@beaver-labs.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -41,6 +42,7 @@ (define-module (gnu packages xml) #:use-module (gnu packages) + #:use-module (gnu packages base) #:use-module (gnu packages autotools) #:use-module (gnu packages check) #:use-module (gnu packages compression) @@ -1427,6 +1429,42 @@ generating, manipulating, and validating XML documents using the DOM, SAX, and SAX2 APIs.") (license license:asl2.0))) +(define-public xlsxio + (package + (name "xlsxio") + (version "0.2.26") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/brechtsanders/xlsxio") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0j8jral3yc2aib2ykp527lyb62a1d9p7qmfbszy7iy3s65pkma9b")))) + (native-inputs + `(("expat" ,expat) + ("make" ,gnu-make) + ("minizip" ,minizip) + ("which" ,which))) + (build-system gnu-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (delete 'configure) + (delete 'check) + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (invoke "make" "install" + (string-append + "PREFIX=" (assoc-ref outputs "out")))))))) + (synopsis "C library for reading and writing .xlsx files") + (description "XLSX I/O aims to provide a C library for reading and writing +.xlsx files. The .xlsx file format is the native format used by Microsoft(R) +Excel(TM) since version 2007.") + (home-page "https://github.com/brechtsanders/xlsxio") + (license license:expat))) + (define-public java-simple-xml (package (name "java-simple-xml") diff --git a/gnu/packages/xorg.scm b/gnu/packages/xorg.scm index bb49d40fb6..868a0626b5 100644 --- a/gnu/packages/xorg.scm +++ b/gnu/packages/xorg.scm @@ -6,7 +6,7 @@ ;;; Copyright © 2015 Eric Dvorsak <eric@dvorsak.fr> ;;; Copyright © 2016 Mathieu Lirzin <mthl@gnu.org> ;;; Copyright © 2015 Cyrill Schenkel <cyrill.schenkel@gmail.com> -;;; Copyright © 2016, 2017, 2019 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2016, 2017, 2019, 2020 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2016 Nikita <nikita@n0.is> ;;; Copyright © 2016 Alex Kost <alezost@gmail.com> ;;; Copyright © 2016 David Craven <david@craven.ch> @@ -2714,14 +2714,14 @@ as USB mice.") (define-public xf86-video-amdgpu (package (name "xf86-video-amdgpu") - (version "19.0.1") + (version "19.1.0") (source (origin (method url-fetch) (uri (string-append "mirror://xorg/individual/driver/" "xf86-video-amdgpu-" version ".tar.bz2")) (sha256 - (base32 "1mf6s7i423b2xyl469kwnakrpp5fr41sm8hh7vli5jxdd8crg8da")))) + (base32 "0pgy4ihnja0vm8504qw7qxh3pdpa3p9k6967nz15m6b1mvha83jg")))) (build-system gnu-build-system) (inputs `(("xorg-server" ,xorg-server))) (native-inputs `(("pkg-config" ,pkg-config))) @@ -2781,20 +2781,19 @@ X server.") (define-public xf86-video-ati (package (name "xf86-video-ati") - (version "19.0.1") + (version "19.1.0") (source (origin (method url-fetch) (uri (string-append "mirror://xorg/individual/driver/" "xf86-video-ati-" version ".tar.bz2")) (sha256 - (base32 "1c31g5q5p3nk9nscwikh1vvfnhdwsxiw7j8v678nlm34hrfh3djw")))) + (base32 "0j9w4axsqlycv4v14g53xyhkm9h7d27b2fcv9lrzb9gf54b5m7v5")))) (build-system gnu-build-system) (inputs `(("mesa" ,mesa) ("xorgproto" ,xorgproto) ("xorg-server" ,xorg-server))) (native-inputs `(("pkg-config" ,pkg-config))) - (arguments `(#:configure-flags `("--disable-glamor"))) ; TODO: Enable glamor (home-page "https://www.x.org/wiki/") (synopsis "ATI Radeon video driver for X server") (description @@ -3364,7 +3363,7 @@ Xorg X server.") (define-public xf86-video-sis (package (name "xf86-video-sis") - (version "0.10.9") + (version "0.12.0") (source (origin (method url-fetch) @@ -3372,16 +3371,15 @@ Xorg X server.") "mirror://xorg/individual/driver/xf86-video-sis-" version ".tar.bz2")) - (patches (search-patches "xf86-video-sis-xorg-compat.patch")) (sha256 - (base32 - "03f1abjjf68y8y1iz768rn95va9d33wmbwfbsqrgl6k0gi0bf9jj")))) + (base32 + "0nrs6cjldlhakx5987fiiggjrlzilsbdc7l9pz22x1iwslbkz78i")))) (build-system gnu-build-system) (inputs `(("mesa" ,mesa) ("xorgproto" ,xorgproto) ("xorg-server" ,xorg-server))) (native-inputs - `(("pkg-config" ,pkg-config))) + `(("pkg-config" ,pkg-config))) (home-page "https://www.x.org/wiki/") (synopsis "Sis video driver for X server") (description @@ -5447,15 +5445,18 @@ communicates with the user via graphical controls such as buttons and draggable titlebars and borders.") (license license:x11))) -(define xorg-server/fixed ; Fixes CVE-2020-14347 +(define xorg-server/fixed ; security fixes (package (inherit xorg-server) + (version "1.20.9") (source (origin (inherit (package-source xorg-server)) - (patches - (append (origin-patches (package-source xorg-server)) - (search-patches "xorg-server-CVE-2020-14347.patch"))))))) + (uri (string-append "mirror://xorg/individual/xserver/" + "xorg-server-" version ".tar.bz2")) + (sha256 + (base32 + "0w9mrnffvjgmwi50kln15i8rpdskxv97r78l75wlcmg4vzhg46g2")))))) ;; This package is intended to be used when building GTK+. ;; Note: It's currently marked as "hidden" to avoid having two non-eq? diff --git a/gnu/services/base.scm b/gnu/services/base.scm index 491f35702a..d560ad5a13 100644 --- a/gnu/services/base.scm +++ b/gnu/services/base.scm @@ -1558,57 +1558,72 @@ proxy of 'guix-daemon'...~%") (provision '(guix-daemon)) (requirement '(user-processes)) (actions (list shepherd-set-http-proxy-action)) - (modules '((srfi srfi-1))) + (modules '((srfi srfi-1) + (ice-9 match) + (gnu build shepherd))) (start - #~(lambda _ - (define proxy - ;; HTTP/HTTPS proxy. The 'http_proxy' variable is set by - ;; the 'set-http-proxy' action. - (or (getenv "http_proxy") #$http-proxy)) - - (fork+exec-command - (cons* #$(file-append guix "/bin/guix-daemon") - "--build-users-group" #$build-group - "--max-silent-time" #$(number->string max-silent-time) - "--timeout" #$(number->string timeout) - "--log-compression" #$(symbol->string log-compression) - #$@(if use-substitutes? - '() - '("--no-substitutes")) - "--substitute-urls" #$(string-join substitute-urls) - #$@extra-options - - ;; Add CHROOT-DIRECTORIES and all their dependencies - ;; (if these are store items) to the chroot. - (append-map (lambda (file) - (append-map (lambda (directory) - (list "--chroot-directory" - directory)) - (call-with-input-file file - read))) - '#$(map references-file - chroot-directories))) - - #:environment-variables - (append (list #$@(if tmpdir - (list (string-append "TMPDIR=" tmpdir)) - '()) - - ;; Make sure we run in a UTF-8 locale so that - ;; 'guix offload' correctly restores nars that - ;; contain UTF-8 file names such as - ;; 'nss-certs'. See - ;; <https://bugs.gnu.org/32942>. - (string-append "GUIX_LOCPATH=" - #$glibc-utf8-locales - "/lib/locale") - "LC_ALL=en_US.utf8") - (if proxy - (list (string-append "http_proxy=" proxy) - (string-append "https_proxy=" proxy)) - '())) - - #:log-file #$log-file))) + (with-imported-modules (source-module-closure + '((gnu build shepherd))) + #~(lambda args + (define proxy + ;; HTTP/HTTPS proxy. The 'http_proxy' variable is set by + ;; the 'set-http-proxy' action. + (or (getenv "http_proxy") #$http-proxy)) + + (fork+exec-command/container + (cons* #$(file-append guix "/bin/guix-daemon") + "--build-users-group" #$build-group + "--max-silent-time" + #$(number->string max-silent-time) + "--timeout" #$(number->string timeout) + "--log-compression" + #$(symbol->string log-compression) + #$@(if use-substitutes? + '() + '("--no-substitutes")) + "--substitute-urls" #$(string-join substitute-urls) + #$@extra-options + + ;; Add CHROOT-DIRECTORIES and all their dependencies + ;; (if these are store items) to the chroot. + (append-map + (lambda (file) + (append-map (lambda (directory) + (list "--chroot-directory" + directory)) + (call-with-input-file file + read))) + '#$(map references-file + chroot-directories))) + + ;; When running the installer, we need guix-daemon to + ;; operate from within the same MNT namespace as the + ;; installation container. In that case only, enter the + ;; namespace of the process PID passed as start argument. + #:pid (match args + ((pid) (string->number pid)) + (else (getpid))) + + #:environment-variables + (append (list #$@(if tmpdir + (list (string-append "TMPDIR=" tmpdir)) + '()) + + ;; Make sure we run in a UTF-8 locale so that + ;; 'guix offload' correctly restores nars + ;; that contain UTF-8 file names such as + ;; 'nss-certs'. See + ;; <https://bugs.gnu.org/32942>. + (string-append "GUIX_LOCPATH=" + #$glibc-utf8-locales + "/lib/locale") + "LC_ALL=en_US.utf8") + (if proxy + (list (string-append "http_proxy=" proxy) + (string-append "https_proxy=" proxy)) + '())) + + #:log-file #$log-file)))) (stop #~(make-kill-destructor)))))) (define (guix-accounts config) diff --git a/gnu/services/certbot.scm b/gnu/services/certbot.scm index 5643340799..1c67ff63f1 100644 --- a/gnu/services/certbot.scm +++ b/gnu/services/certbot.scm @@ -71,7 +71,8 @@ (default "/var/www")) (certificates certbot-configuration-certificates (default '())) - (email certbot-configuration-email) + (email certbot-configuration-email + (default #f)) (server certbot-configuration-server (default #f)) (rsa-key-size certbot-configuration-rsa-key-size @@ -99,12 +100,14 @@ (if challenge (append (list name certbot "certonly" "-n" "--agree-tos" - "-m" email "--manual" (string-append "--preferred-challenges=" challenge) "--cert-name" name "--manual-public-ip-logging-ok" "-d" (string-join domains ",")) + (if email + `("--email" ,email) + '("--register-unsafely-without-email")) (if server `("--server" ,server) '()) (if rsa-key-size `("--rsa-key-size" ,rsa-key-size) '()) (if authentication-hook @@ -114,10 +117,12 @@ (if deploy-hook `("--deploy-hook" ,deploy-hook) '())) (append (list name certbot "certonly" "-n" "--agree-tos" - "-m" email "--webroot" "-w" webroot "--cert-name" name "-d" (string-join domains ",")) + (if email + `("--email" ,email) + '("--register-unsafely-without-email")) (if server `("--server" ,server) '()) (if rsa-key-size `("--rsa-key-size" ,rsa-key-size) '()) (if deploy-hook `("--deploy-hook" ,deploy-hook) '())))))) diff --git a/gnu/services/docker.scm b/gnu/services/docker.scm index 380a942ed2..2fb2ae2c47 100644 --- a/gnu/services/docker.scm +++ b/gnu/services/docker.scm @@ -2,6 +2,7 @@ ;;; Copyright © 2018 Danny Milosavljevic <dannym@scratchpost.org> ;;; Copyright © 2020 Jakub Kądziołka <kuba@kadziolka.net> ;;; Copyright © 2020 Maxim Cournoyer <maxim.cournoyer@gmail.com> +;;; Copyright © 2020 Efraim Flashner <efraim@flashner.co.il> ;;; ;;; This file is part of GNU Guix. ;;; @@ -133,6 +134,9 @@ loop-back communications.") bundles in Docker containers.") (extensions (list + ;; Make sure the 'docker' command is available. + (service-extension profile-service-type + (list docker-cli)) (service-extension activation-service-type %docker-activation) (service-extension shepherd-root-service-type diff --git a/gnu/services/linux.scm b/gnu/services/linux.scm index ec42663a11..72c7779596 100644 --- a/gnu/services/linux.scm +++ b/gnu/services/linux.scm @@ -196,7 +196,7 @@ representation." (define-record-type* <zram-device-configuration> zram-device-configuration make-zram-device-configuration zram-device-configuration? - (size zram-device-configration-size + (size zram-device-configuration-size (default "1G")) ; string or integer (compression-algorithm zram-device-configuration-compression-algorithm (default 'lzo)) ; symbol diff --git a/gnu/services/mail.scm b/gnu/services/mail.scm index cfcaf4601b..71fa975b5d 100644 --- a/gnu/services/mail.scm +++ b/gnu/services/mail.scm @@ -99,7 +99,9 @@ (and (string? x) (not (string-index x #\space)))) val))) (define (serialize-space-separated-string-list field-name val) - (serialize-field field-name (string-join val " "))) + (match val + (() #f) + (_ (serialize-field field-name (string-join val " "))))) (define (comma-separated-string-list? val) (and (list? val) @@ -479,64 +481,6 @@ interfaces. If you want to specify non-default ports or anything more complex, customize the address and port fields of the @samp{inet-listener} of the specific services you are interested in.") - (protocols - (protocol-configuration-list - (list (protocol-configuration - (name "imap")))) - "List of protocols we want to serve. Available protocols include -@samp{imap}, @samp{pop3}, and @samp{lmtp}.") - - (services - (service-configuration-list - (list - (service-configuration - (kind "imap-login") - (client-limit 0) - (process-limit 0) - (listeners - (list - (inet-listener-configuration (protocol "imap") (port 143) (ssl? #f)) - (inet-listener-configuration (protocol "imaps") (port 993) (ssl? #t))))) - (service-configuration - (kind "pop3-login") - (listeners - (list - (inet-listener-configuration (protocol "pop3") (port 110) (ssl? #f)) - (inet-listener-configuration (protocol "pop3s") (port 995) (ssl? #t))))) - (service-configuration - (kind "lmtp") - (client-limit 1) - (process-limit 0) - (listeners - (list (unix-listener-configuration (path "lmtp") (mode "0666"))))) - (service-configuration - (kind "imap") - (client-limit 1) - (process-limit 1024)) - (service-configuration - (kind "pop3") - (client-limit 1) - (process-limit 1024)) - (service-configuration - (kind "auth") - (service-count 0) - (client-limit 0) - (process-limit 1) - (listeners - (list (unix-listener-configuration (path "auth-userdb"))))) - (service-configuration - (kind "auth-worker") - (client-limit 1) - (process-limit 0)) - (service-configuration - (kind "dict") - (client-limit 1) - (process-limit 0) - (listeners (list (unix-listener-configuration (path "dict"))))))) - "List of services to enable. Available services include @samp{imap}, -@samp{imap-login}, @samp{pop3}, @samp{pop3-login}, @samp{auth}, and -@samp{lmtp}.") - (dict (dict-configuration (dict-configuration)) "Dict configuration, as created by the @code{dict-configuration} @@ -1430,7 +1374,65 @@ greyed out, instead of only later giving \"not selectable\" popup error. (imap-urlauth-host (string "") - "Host allowed in URLAUTH URLs sent by client. \"*\" allows all.") ) + "Host allowed in URLAUTH URLs sent by client. \"*\" allows all.") + + (protocols + (protocol-configuration-list + (list (protocol-configuration + (name "imap")))) + "List of protocols we want to serve. Available protocols include +@samp{imap}, @samp{pop3}, and @samp{lmtp}.") + + (services + (service-configuration-list + (list + (service-configuration + (kind "imap-login") + (client-limit 0) + (process-limit 0) + (listeners + (list + (inet-listener-configuration (protocol "imap") (port 143) (ssl? #f)) + (inet-listener-configuration (protocol "imaps") (port 993) (ssl? #t))))) + (service-configuration + (kind "pop3-login") + (listeners + (list + (inet-listener-configuration (protocol "pop3") (port 110) (ssl? #f)) + (inet-listener-configuration (protocol "pop3s") (port 995) (ssl? #t))))) + (service-configuration + (kind "lmtp") + (client-limit 1) + (process-limit 0) + (listeners + (list (unix-listener-configuration (path "lmtp") (mode "0666"))))) + (service-configuration + (kind "imap") + (client-limit 1) + (process-limit 1024)) + (service-configuration + (kind "pop3") + (client-limit 1) + (process-limit 1024)) + (service-configuration + (kind "auth") + (service-count 0) + (client-limit 0) + (process-limit 1) + (listeners + (list (unix-listener-configuration (path "auth-userdb"))))) + (service-configuration + (kind "auth-worker") + (client-limit 1) + (process-limit 0)) + (service-configuration + (kind "dict") + (client-limit 1) + (process-limit 0) + (listeners (list (unix-listener-configuration (path "dict"))))))) + "List of services to enable. Available services include @samp{imap}, +@samp{imap-login}, @samp{pop3}, @samp{pop3-login}, @samp{auth}, and +@samp{lmtp}.")) (define-configuration opaque-dovecot-configuration (dovecot diff --git a/gnu/services/virtualization.scm b/gnu/services/virtualization.scm index b93ed70099..20e104f48c 100644 --- a/gnu/services/virtualization.scm +++ b/gnu/services/virtualization.scm @@ -1,6 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2017 Ryan Moe <ryan.moe@gmail.com> -;;; Copyright © 2018 Ludovic Courtès <ludo@gnu.org> +;;; Copyright © 2018, 2020 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2020 Jan (janneke) Nieuwenhuizen <janneke@gnu.org> ;;; ;;; This file is part of GNU Guix. @@ -39,6 +39,7 @@ #:use-module (gnu system) #:use-module (guix derivations) #:use-module (guix gexp) + #:use-module (guix modules) #:use-module (guix monads) #:use-module (guix packages) #:use-module (guix records) @@ -61,7 +62,10 @@ hurd-vm-configuration-options hurd-vm-configuration-id hurd-vm-configuration-net-options + hurd-vm-configuration-secrets + hurd-vm-disk-image + hurd-vm-port hurd-vm-net-options hurd-vm-service-type @@ -806,6 +810,41 @@ functionality of the kernel Linux."))) ;;; +;;; Secrets for guest VMs. +;;; + +(define (secret-service-activation port) + "Return an activation snippet that fetches sensitive material at local PORT, +over TCP. Reboot upon failure." + (with-imported-modules '((gnu build secret-service) + (guix build utils)) + #~(begin + (use-modules (gnu build secret-service)) + (let ((sent (secret-service-receive-secrets #$port))) + (unless sent + (sleep 3) + (reboot)))))) + +(define secret-service-type + (service-type + (name 'secret-service) + (extensions (list (service-extension activation-service-type + secret-service-activation))) + (description + "This service fetches secret key and other sensitive material over TCP at +boot time. This service is meant to be used by virtual machines (VMs) that +can only be accessed by their host."))) + +(define (secret-service-operating-system os) + "Return an operating system based on OS that includes the secret-service, +that will be listening to receive secret keys on port 1004, TCP." + (operating-system + (inherit os) + (services (cons (service secret-service-type 1004) + (operating-system-user-services os))))) + + +;;; ;;; The Hurd in VM service: a Childhurd. ;;; @@ -849,11 +888,14 @@ functionality of the kernel Linux."))) (default #f)) (net-options hurd-vm-configuration-net-options ;list of string (thunked) - (default (hurd-vm-net-options this-record)))) + (default (hurd-vm-net-options this-record))) + (secret-root hurd-vm-configuration-secret-root ;string + (default "/etc/childhurd"))) (define (hurd-vm-disk-image config) - "Return a disk-image for the Hurd according to CONFIG." - (let ((os (hurd-vm-configuration-os config)) + "Return a disk-image for the Hurd according to CONFIG. The secret-service +is added to the OS specified in CONFIG." + (let ((os (secret-service-operating-system (hurd-vm-configuration-os config))) (disk-size (hurd-vm-configuration-disk-size config))) (system-image (image @@ -861,15 +903,27 @@ functionality of the kernel Linux."))) (size disk-size) (operating-system os))))) -(define (hurd-vm-net-options config) +(define (hurd-vm-port config base) + "Return the forwarded vm port for this childhurd config." (let ((id (or (hurd-vm-configuration-id config) 0))) - (define (qemu-vm-port base) - (number->string (+ base (* 1000 id)))) - `("--device" "rtl8139,netdev=net0" - "--netdev" ,(string-append - "user,id=net0" - ",hostfwd=tcp:127.0.0.1:" (qemu-vm-port 10022) "-:2222" - ",hostfwd=tcp:127.0.0.1:" (qemu-vm-port 15900) "-:5900")))) + (+ base (* 1000 id)))) +(define %hurd-vm-secrets-port 11004) +(define %hurd-vm-ssh-port 10022) +(define %hurd-vm-vnc-port 15900) + +(define (hurd-vm-net-options config) + `("--device" "rtl8139,netdev=net0" + "--netdev" + ,(string-append "user,id=net0" + ",hostfwd=tcp:127.0.0.1:" + (number->string (hurd-vm-port config %hurd-vm-secrets-port)) + "-:1004" + ",hostfwd=tcp:127.0.0.1:" + (number->string (hurd-vm-port config %hurd-vm-ssh-port)) + "-:2222" + ",hostfwd=tcp:127.0.0.1:" + (number->string (hurd-vm-port config %hurd-vm-vnc-port)) + "-:5900"))) (define (hurd-vm-shepherd-service config) "Return a <shepherd-service> for a Hurd in a Virtual Machine with CONFIG." @@ -900,8 +954,26 @@ functionality of the kernel Linux."))) (string->symbol (number->string id))) provisions) provisions)) - (requirement '(networking)) - (start #~(make-forkexec-constructor #$vm-command)) + (requirement '(loopback networking user-processes)) + (start + (with-imported-modules + (source-module-closure '((gnu build secret-service) + (guix build utils))) + #~(let ((spawn (make-forkexec-constructor #$vm-command))) + (lambda _ + (let ((pid (spawn)) + (port #$(hurd-vm-port config %hurd-vm-secrets-port)) + (root #$(hurd-vm-configuration-secret-root config))) + (catch #t + (lambda _ + (secret-service-send-secrets port root)) + (lambda (key . args) + (kill (- pid) SIGTERM) + (apply throw key args))) + pid))))) + (modules `((gnu build secret-service) + (guix build utils) + ,@%default-modules)) (stop #~(make-kill-destructor)))))) (define hurd-vm-service-type diff --git a/gnu/services/web.scm b/gnu/services/web.scm index 3b9f9e40be..c8ffc19d83 100644 --- a/gnu/services/web.scm +++ b/gnu/services/web.scm @@ -12,6 +12,7 @@ ;;; Copyright © 2019, 2020 Florian Pelz <pelzflorian@pelzflorian.de> ;;; Copyright © 2020 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2020 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2020 Arun Isaac <arunisaac@systemreboot.net> ;;; ;;; This file is part of GNU Guix. ;;; @@ -151,6 +152,7 @@ php-fpm-configuration-timezone php-fpm-configuration-workers-log-file php-fpm-configuration-file + php-fpm-configuration-php-ini-file php-fpm-dynamic-process-manager-configuration make-php-fpm-dynamic-process-manager-configuration @@ -794,13 +796,29 @@ of index files." #:user #$user #:group #$group)) (stop #~(make-kill-destructor))))))) +(define fcgiwrap-activation + (match-lambda + (($ <fcgiwrap-configuration> package socket user group) + #~(begin + ;; When listening on a unix socket, create a parent directory for the + ;; socket with the correct permissions. + (when (string-prefix? "unix:" #$socket) + (let ((run-directory + (dirname (substring #$socket (string-length "unix:"))))) + (mkdir-p run-directory) + (chown run-directory + (passwd:uid (getpw #$user)) + (group:gid (getgr #$group))))))))) + (define fcgiwrap-service-type (service-type (name 'fcgiwrap) (extensions (list (service-extension shepherd-root-service-type fcgiwrap-shepherd-service) (service-extension account-service-type - fcgiwrap-accounts))) + fcgiwrap-accounts) + (service-extension activation-service-type + fcgiwrap-activation))) (default-value (fcgiwrap-configuration)))) (define-record-type* <php-fpm-configuration> php-fpm-configuration @@ -839,6 +857,8 @@ of index files." (version-major (package-version php)) "-fpm.www.log"))) (file php-fpm-configuration-file ;#f | file-like + (default #f)) + (php-ini-file php-fpm-configuration-php-ini-file ;#f | file-like (default #f))) (define-record-type* <php-fpm-dynamic-process-manager-configuration> @@ -945,7 +965,7 @@ of index files." (match-lambda (($ <php-fpm-configuration> php socket user group socket-user socket-group pid-file log-file pm display-errors - timezone workers-log-file file) + timezone workers-log-file file php-ini-file) (list (shepherd-service (provision '(php-fpm)) (documentation "Run the php-fpm daemon.") @@ -956,7 +976,10 @@ of index files." #$(or file (default-php-fpm-config socket user group socket-user socket-group pid-file log-file - pm display-errors timezone workers-log-file))) + pm display-errors timezone workers-log-file)) + #$@(if php-ini-file + `("-c" ,php-ini-file) + '())) #:pid-file #$pid-file)) (stop #~(make-kill-destructor))))))) diff --git a/gnu/system.scm b/gnu/system.scm index f092df56ce..bdb696fe2e 100644 --- a/gnu/system.scm +++ b/gnu/system.scm @@ -316,11 +316,13 @@ file system labels." ((? bytevector? bv) ;old format (bytevector->uuid bv 'dce)) ((? string? device) - ;; It used to be that we would not distinguish between labels and - ;; device names. Try to infer the right thing here. - (if (string-prefix? "/dev/" device) - device - (file-system-label device))))) + (if (string-contains device ":/") + device ; nfs-root + ;; It used to be that we would not distinguish between labels and + ;; device names. Try to infer the right thing here. + (if (string-prefix? "/" device) + device + (file-system-label device)))))) (match (read port) (('boot-parameters ('version 0) diff --git a/gnu/system/examples/lightweight-desktop.tmpl b/gnu/system/examples/lightweight-desktop.tmpl index 20b122fe51..b4037d4f79 100644 --- a/gnu/system/examples/lightweight-desktop.tmpl +++ b/gnu/system/examples/lightweight-desktop.tmpl @@ -4,7 +4,6 @@ (use-modules (gnu) (gnu system nss)) (use-service-modules desktop) -(use-package-modules bootloaders certs ratpoison suckless wm) (use-package-modules bootloaders certs ratpoison suckless wm xorg) (operating-system diff --git a/gnu/system/image.scm b/gnu/system/image.scm index c1a718d607..97c7021454 100644 --- a/gnu/system/image.scm +++ b/gnu/system/image.scm @@ -63,7 +63,8 @@ iso9660-image find-image - system-image)) + system-image + image-with-label)) ;;; @@ -266,8 +267,7 @@ used in the image." #$output image-root))))) (computed-file "partition.img" image-builder - #:options `(#:local-build? #t ;typically large file - #:references-graphs ,inputs)))) + #:options `(#:references-graphs ,inputs)))) (define (partition->config partition) ;; Return the genimage partition configuration for PARTITION. @@ -325,8 +325,7 @@ image ~a { #~(symlink (string-append #$image-dir "/" #$genimage-name) #$output) - #:options `(#:local-build? #t ;typically large file - #:substitutable? ,substitutable?)))) + #:options `(#:substitutable? ,substitutable?)))) ;; @@ -403,10 +402,23 @@ used in the image. " #:volume-id #$root-label #:volume-uuid #$root-uuid))))) (computed-file name builder - #:options `(#:local-build? #t ;typically large file - #:references-graphs ,inputs + #:options `(#:references-graphs ,inputs #:substitutable? ,substitutable?)))) +(define (image-with-label base-image label) + "The volume ID of an ISO is the label of the first partition. This procedure +returns an image record where the first partition's label is set to <label>." + (image + (inherit base-image) + (partitions + (match (image-partitions base-image) + ((boot others ...) + (cons + (partition + (inherit boot) + (label label)) + others)))))) + ;; ;; Image creation. diff --git a/gnu/system/install.scm b/gnu/system/install.scm index a87c2f4207..be5a678cec 100644 --- a/gnu/system/install.scm +++ b/gnu/system/install.scm @@ -175,39 +175,6 @@ manual." ;; Sub-directory used as the backing store for copy-on-write. "/tmp/guix-inst") -(define (make-cow-store target) - "Return a gexp that makes the store copy-on-write, using TARGET as the -backing store. This is useful when TARGET is on a hard disk, whereas the -current store is on a RAM disk." - - (define (set-store-permissions directory) - ;; Set the right perms on DIRECTORY to use it as the store. - #~(begin - (chown #$directory 0 30000) ;use the fixed 'guixbuild' GID - (chmod #$directory #o1775))) - - #~(begin - ;; Bind-mount TARGET's /tmp in case we need space to build things. - (let ((tmpdir (string-append #$target "/tmp"))) - (mkdir-p tmpdir) - (mount tmpdir "/tmp" "none" MS_BIND)) - - (let* ((rw-dir (string-append target #$%backing-directory)) - (work-dir (string-append rw-dir "/../.overlayfs-workdir"))) - (mkdir-p rw-dir) - (mkdir-p work-dir) - (mkdir-p "/.rw-store") - #$(set-store-permissions #~rw-dir) - #$(set-store-permissions "/.rw-store") - - ;; Mount the overlay, then atomically make it the store. - (mount "none" "/.rw-store" "overlay" 0 - (string-append "lowerdir=" #$(%store-prefix) "," - "upperdir=" rw-dir "," - "workdir=" work-dir)) - (mount "/.rw-store" #$(%store-prefix) "" MS_MOVE) - (rmdir "/.rw-store")))) - (define cow-store-service-type (shepherd-service-type 'cow-store @@ -222,13 +189,18 @@ the given target.") ;; This is meant to be explicitly started by the user. (auto-start? #f) - (start #~(case-lambda - ((target) - #$(make-cow-store #~target) - target) - (else - ;; Do nothing, and mark the service as stopped. - #f))) + (modules `((gnu build install) + ,@%default-modules)) + (start + (with-imported-modules (source-module-closure + '((gnu build install))) + #~(case-lambda + ((target) + (mount-cow-store target #$%backing-directory) + target) + (else + ;; Do nothing, and mark the service as stopped. + #f)))) (stop #~(lambda (target) ;; Delete the temporary directory, but leave everything ;; mounted as there may still be processes using it since diff --git a/gnu/system/vm.scm b/gnu/system/vm.scm index 861f2a427a..80a8618729 100644 --- a/gnu/system/vm.scm +++ b/gnu/system/vm.scm @@ -699,7 +699,8 @@ of the GNU system as described by OS." (device (file-system->mount-tag source)) (type "9p") (flags (if writable? '() '(read-only))) - (options "trans=virtio,cache=loose") + (options (string-append "trans=virtio" + (if writable? "" ",cache=loose"))) (check? #f) (create-mount-point? #t))))) diff --git a/gnu/tests/base.scm b/gnu/tests/base.scm index 086d2a133f..482310cc12 100644 --- a/gnu/tests/base.scm +++ b/gnu/tests/base.scm @@ -55,7 +55,10 @@ (define* (run-basic-test os command #:optional (name "basic") - #:key initialization root-password) + #:key + initialization + root-password + desktop?) "Return a derivation called NAME that tests basic features of the OS started using COMMAND, a gexp that evaluates to a list of strings. Compare some properties of running system to what's declared in OS, an <operating-system>. @@ -300,6 +303,12 @@ info --version") (test-equal "login on tty1" "root\n" (begin + ;; XXX: On desktop, GDM3 will switch to TTY7. If this happens + ;; after we switched to TTY1, we won't be able to login. Make + ;; sure to wait long enough before switching to TTY1. + (when #$desktop? + (sleep 30)) + (marionette-control "sendkey ctrl-alt-f1" marionette) ;; Wait for the 'term-tty1' service to be running (using ;; 'start-service' is the simplest and most reliable way to do diff --git a/gnu/tests/install.scm b/gnu/tests/install.scm index 9656e5f41f..5b7f9bf671 100644 --- a/gnu/tests/install.scm +++ b/gnu/tests/install.scm @@ -1317,10 +1317,11 @@ build (current-guix) and then store a couple of full system images.") marionette #:desktop? desktop? #:encrypted? encrypted?)))) - (command (qemu-command/writable-image image))) + (command (qemu-command/writable-image image #:memory-size 512))) (run-basic-test target-os command name #:initialization (and encrypted? enter-luks-passphrase) - #:root-password %root-password))))) + #:root-password %root-password + #:desktop? desktop?))))) (define %test-gui-installed-os (guided-installation-test diff --git a/gnu/tests/nfs.scm b/gnu/tests/nfs.scm index 5e4de2783b..da729ddcc9 100644 --- a/gnu/tests/nfs.scm +++ b/gnu/tests/nfs.scm @@ -39,7 +39,8 @@ #:use-module (guix store) #:use-module (guix monads) #:export (%test-nfs - %test-nfs-server)) + %test-nfs-server + %test-nfs-root-fs)) (define %base-os (operating-system @@ -262,3 +263,152 @@ (description "Test that an NFS server can be started and exported directories can be mounted.") (value (run-nfs-server-test)))) + + +(define (run-nfs-root-fs-test) + "Run a test of an OS mounting its root file system via NFS." + (define nfs-root-server-os + (marionette-operating-system + (operating-system + (inherit %nfs-os) + (services + (modify-services (operating-system-user-services %nfs-os) + (nfs-service-type config => + (nfs-configuration + (debug '(nfs nfsd mountd)) + ;;; Note: Adding the following line causes Guix to hang. + ;(rpcmountd-port 20001) + ;;; Note: Adding the following line causes Guix to hang. + ;(rpcstatd-port 20002) ; FIXME: Set broadcast port AND listening port. + (nfsd-port 2049) + (nfs-versions '("4.2")) + (exports '(("/export" + "*(rw,insecure,no_subtree_check,crossmnt,fsid=root,no_root_squash,insecure,async)")))))))) + #:requirements '(nscd) + #:imported-modules '((gnu services herd) + (guix combinators)))) + + (define nfs-root-client-os + (marionette-operating-system + (operating-system + (inherit (simple-operating-system (service dhcp-client-service-type))) + (kernel-arguments '("ip=dhcp")) + (file-systems (cons + (file-system + (type "nfs") + (mount-point "/") + (device ":/export") + (options "addr=127.0.0.1,vers=4.2")) + %base-file-systems))) + #:requirements '(nscd) + #:imported-modules '((gnu services herd) + (guix combinators)))) + + (define test + (with-imported-modules '((gnu build marionette)) + #~(begin + (use-modules (gnu build marionette) + (srfi srfi-64)) + + (mkdir #$output) + (chdir #$output) + + (test-begin "start-nfs-boot-test") + + ;;; Start up NFS server host. + + (mkdir "/tmp/server") + (define server-marionette + (make-marionette (list #$(virtual-machine + nfs-root-server-os + ;(operating-system nfs-root-server-os) + ;(port-forwardings '( ; (111 . 111) + ; (2049 . 2049) + ; (20001 . 20001) + ; (20002 . 20002))) +)) + #:socket-directory "/tmp/server")) + + (marionette-eval + '(begin + (use-modules (gnu services herd)) + (current-output-port + (open-file "/dev/console" "w0")) + ;; FIXME: Instead statfs "/" and "/export" and wait until they + ;; are different file systems. But Guile doesn't seem to have + ;; statfs. + (sleep 5) + (chmod "/export" #o777) + (symlink "/gnu" "/export/gnu") + (start-service 'nscd) + (start-service 'networking) + (start-service 'nfs)) + server-marionette) + + ;;; Wait for the NFS services to be up and running. + + (test-assert "nfs services are running" + (wait-for-file "/var/run/rpc.statd.pid" server-marionette)) + + (test-assert "NFS port is ready" + (wait-for-tcp-port 2049 server-marionette)) + + (test-assert "NFS statd port is ready" + (wait-for-tcp-port 20002 server-marionette)) + + (test-assert "NFS mountd port is ready" + (wait-for-tcp-port 20001 server-marionette)) + + ;;; FIXME: (test-assert "NFS portmapper port is ready" + ;;; FIXME: (wait-for-tcp-port 111 server-marionette)) + + ;;; Start up NFS client host. + + (define client-marionette + (make-marionette (list #$(virtual-machine + nfs-root-client-os + ;(port-forwardings '((111 . 111) + ; (2049 . 2049) + ; (20001 . 20001) + ; (20002 . 20002))) + )))) + + (marionette-eval + '(begin + (use-modules (gnu services herd)) + (use-modules (rnrs io ports)) + + (current-output-port + (open-file "/dev/console" "w0")) + (let ((content (call-with-input-file "/proc/mounts" get-string-all))) + (call-with-output-file "/mounts.new" + (lambda (port) + (display content port)))) + (chmod "/mounts.new" #o777) + (rename-file "/mounts.new" "/mounts")) + client-marionette) + + (test-assert "nfs-root-client booted") + + ;;; Check whether NFS client host communicated with NFS server host. + + (test-assert "nfs client deposited file" + (wait-for-file "/export/mounts" server-marionette)) + (marionette-eval + '(begin + (current-output-port + (open-file "/dev/console" "w0")) + (call-with-input-file "/export/mounts" display)) + server-marionette) + + (test-end) + (exit (= (test-runner-fail-count (test-runner-current)) 0))))) + + (gexp->derivation "nfs-server-test" test)) + +(define %test-nfs-root-fs + (system-test + (name "nfs-root-fs") + (description "Test that an NFS server can be started and the exported +directory can be used as root filesystem.") + (value (run-nfs-root-fs-test)))) |