summary refs log tree commit diff
path: root/gnu/installer/newt
AgeCommit message (Collapse)Author
2019-04-29installer: Fix typo in docstring.Meiyo Peng
* gnu/installer/newt/wifi.scm (draw-scanning-page): Fix typo in docstring. Signed-off-by: Ludovic Courtès <ludo@gnu.org>
2019-04-28installer: Tell the user where the config file is.Ludovic Courtès
* gnu/installer/newt/final.scm (strip-prefix): New procedure. (run-config-display-page): Add a sentence showing where the config file is stored.
2019-04-28installer: Fix handling of user password mismatches.Ludovic Courtès
Previously, if we had a password mismatch, the 'password' field would end up containing a <user> record instead of the actual password. * gnu/installer/newt/user.scm (confirm-password): Make TRY-AGAIN optional and adjust docstring. (run-user-add-page): Move 'confirm-password' call one level higher.
2019-04-28installer: User accounts can now have a "real name."Ludovic Courtès
* gnu/installer/newt/user.scm (run-user-add-page): Add #:real-name. Add a label and entry for the real name and initialize the 'real-name' field of the <user> record. * gnu/installer/final.scm (create-user-database): Set the 'comment' field of the <user-account> record.
2019-04-28installer: Improve layout of the partitioning page.Ludovic Courtès
Previously the "listbox" would be unnecessarily high, leaving too little space for the German translation of the text above. * gnu/installer/newt/partition.scm (run-disk-page): Increase #:info-textbox-width and pass #:listbox-height.
2019-04-28installer: Recommended services are pre-selected.Ludovic Courtès
* gnu/installer/services.scm (<system-service>)[recommended?]: New field. * gnu/installer/newt/services.scm (run-desktop-environments-cbt-page): Pass #:selection to 'run-checkbox-tree-page', computed from the 'recommended?' field of each service. (run-networking-cbt-page): Likewise.
2019-04-28installer: Add #:selection parameter to 'run-checkbox-tree-page'.Ludovic Courtès
* gnu/installer/newt/page.scm (%none-selected): New variable. (run-checkbox-tree-page): Add #:selection. [fill-checkbox-tree]: Honor it.
2019-04-27installer: Add missing i18n in the partitioning pages.Ludovic Courtès
* gnu/installer/newt/partition.scm (run-scheme-page): Add missing 'G_' for ITEMS. (run-partioning-page): Likewise. (run-partition-page): Move misplaced call to 'G_'.
2019-04-26installer: Actually reboot when the user presses "Reboot."Ludovic Courtès
* gnu/installer/newt/final.scm (run-install-success-page): Return 'success. * gnu/installer.scm (installer-program): Check the result of the 'final step and reboot upon success.
2019-04-25installer: Ask for confirmation of the user passwords.Ludovic Courtès
* gnu/installer/newt/user.scm (run-user-add-page): Add #:name and #:home-directory and honor them. Add call to 'confirm-password'.
2019-04-25installer: Ask for confirmation of the root password.Ludovic Courtès
* gnu/installer/newt/user.scm (confirm-password): New procedure. (run-root-password-page): Add call to 'confirm-password'.
2019-04-25installer: Use FLAG-PASSWORD for the encryption passphrase confirmation.Ludovic Courtès
* gnu/installer/newt/partition.scm (prompt-luks-passwords) <password-confirm-page>: Pass #:input-flags to 'run-input-page'.
2019-04-25installer: Preserve order of user accounts.Ludovic Courtès
* gnu/installer/newt/user.scm (run-user-page): Add call to 'reverse'.
2019-04-25installer: Ask for the root account password.Ludovic Courtès
Fixes <https://bugs.gnu.org/35399>. * gnu/installer/newt/user.scm (run-root-password-page): New procedure. * gnu/installer/user.scm (users->configuration): Filter out the "root" account. * gnu/installer/final.scm (create-user-database): Set 'uid' field in 'user-account' form.
2019-04-25installer: 'run-input-page' has a new #:input-flags parameter.Ludovic Courtès
* gnu/installer/newt/page.scm (run-input-page): Add #:input-flags and honor it.
2019-04-25installer: Ask for user password and initialize /etc/shadow.Ludovic Courtès
Partly fixes <https://bugs.gnu.org/35399>. * gnu/installer/user.scm (<user>)[password]: New field. * gnu/installer/final.scm (%seed): New variable. (integer->alphanumeric-char, random-string) (create-user-database): New procedures. (install-system): Call 'create-user-database'. * gnu/installer/newt/final.scm (run-install-shell): Add #:users and pass it to 'install-system'. (run-final-page): Pass #:users to 'run-install-shell'. * gnu/installer/newt/user.scm (run-user-add-page): Add password entry. Pass its result as the 'password' field of <user>.
2019-04-25installer: Add missing 'G_' for networking message.Ludovic Courtès
* gnu/installer/newt/network.scm (wait-technology-powered): Add missing 'G_'.
2019-04-23installer: Run 'guix system init' with the right locale.Ludovic Courtès
* gnu/installer/utils.scm (run-shell-command): Add #:locale and honor it. * gnu/installer/newt/final.scm (run-install-shell): Add 'locale' parameter; pass it to 'install-system'. (run-final-page): Obtain locale from RESULT; pass it to 'run-install-shell'. * gnu/installer/final.scm (install-system): Add 'locale' parameter; pass it to 'run-shell-command'.
2019-04-17installer: Sort keyboard layouts according to language and translations.Ludovic Courtès
Previously, we would always (1) put English first, and (2) sort the other layouts based on their English description. This fixes both issues. * gnu/installer/newt/keymap.scm (sort-layouts)[layout<?]: New procedure. [preferred]: New variable. Partition according to both the 'name' and 'synopsis' fields. Sort both the main layouts and the other layouts according to 'layout<?'.
2019-04-17installer: Translate keyboard layout names.Ludovic Courtès
* gnu/installer.scm (installer-program)[installer-builder]: Call 'bindtextdomain' for "xkeyboard-config". * gnu/installer/newt/keymap.scm (run-keymap-page): Add calls to 'gettext'.
2019-04-17installer: Sort items with 'string-locale<?'.Ludovic Courtès
That way "Österreich" comes before "Schweiz" in a German locale (or pretty much any sane locale.) * gnu/installer/newt/page.scm (run-listbox-selection-page)[sort-listbox-items]: Use 'string-locale<?' instead of 'string<=?'.
2019-04-17installer: Look up timezone name translations in "iso_3166-1".Ludovic Courtès
* gnu/installer/newt/timezone.scm (run-timezone-page): Add call to 'gettext' for timezone names.
2019-04-17installer: Display language and territory names natively.Ludovic Courtès
* gnu/installer.scm (installer-program): Add calls to 'bindtextdomain'. * gnu/installer/newt/locale.scm (run-locale-page) <language, territory>: Add calls to 'gettext'.
2019-04-17installer: Change language as soon as it has been chosen.Ludovic Courtès
Previously we'd call 'setlocale' only after the complete 'locale' step had finished. * gnu/installer/newt/locale.scm (run-language-page): Set the 'LANGUAGE' environment variable before returning.
2019-04-14installer: Force user to choose exactly one network management method.Ludovic Courtès
Previously, for non-desktop configs, users could choose any number of network management methods, including 0, 2, or more. * gnu/installer/newt/services.scm (run-networking-cbt-page): Remove 'network-management?' parameter and select only 'networking services. (run-network-management-page): New procedure. (run-services-page): Call it when DESKTOP is the empty list.
2019-04-07installer: Adjust welcome page message.Ludovic Courtès
* gnu/installer/newt/welcome.scm (run-welcome-page): Make the message less scary.
2019-04-07installer: Internationalize service "names".Ludovic Courtès
* gnu/installer/services.scm (%system-services): Mark networking service names with 'G_'. * gnu/installer/newt/services.scm (run-networking-cbt-page): Pass 'system-service-name' through 'G_'.
2019-04-07installer: Offer NM, Connman, and DHCP to non-desktop installs.Ludovic Courtès
* gnu/installer/services.scm (%system-services): Add NetworkManager, Connman, and the DHCP client. * gnu/installer/newt/services.scm (run-networking-cbt-page): Add 'network-management?' parameter and honor it. (run-services-page): Adjust call accordingly.
2019-04-07installer: Add dialog to select networking services.Ludovic Courtès
* gnu/installer/newt/services.scm (run-networking-cbt-page): New procedure. (run-services-page): Call it. * gnu/installer/services.scm (%system-services): Add OpenSSH and Tor. (networking-system-service?): New procedure. * gnu/installer/steps.scm (format-configuration): Add 'networking' and 'ssh' to the service modules.
2019-04-07installer: Generalize desktop environments to system services.Ludovic Courtès
* gnu/installer/services.scm (<desktop-environment>): Rename to... (<system-service>): ... this. Add a 'type' field. (%desktop-environments): Rename to... (%system-services): ... this. (desktop-system-service?): New procedure. (desktop-environments->configuration): Rename to... (system-services->configuration): ... this. Determine the base list of services based on whether SERVICES contains at least one "desktop" service. * gnu/installer/newt/services.scm (run-desktop-environments-cbt-page): Adjust accordingly. * gnu/installer.scm (installer-steps): Likewise.
2019-04-07installer: Remove SLiM-specific instructions.Ludovic Courtès
* gnu/installer/newt/services.scm (run-desktop-environments-cbt-page): Remove "with F1".
2019-04-07installer: Fix wording for "Internet access."Ludovic Courtès
* gnu/installer/newt/network.scm (run-technology-page): Fix wording for "Internet access."
2019-04-07installer: Simplify locale dialogs.Ludovic Courtès
* gnu/installer/newt/locale.scm (run-language-page): Simplify text. (run-territory-page): Likewise. (run-codeset-page): Likewise. (run-locale-page): Don't call 'run-codeset-page' when "UTF-8" is among the codesets of LOCALES.
2019-03-27installer: Ask for confirmation before formatting partitions.Ludovic Courtès
* gnu/installer/newt/page.scm (run-confirmation-page): New procedure. * gnu/installer/newt/partition.scm (draw-formatting-page): Call it.
2019-03-25installer: Set the system's 'keyboard-layout' field.Ludovic Courtès
* gnu/installer/newt/keymap.scm (keyboard-layout->configuration): New procedure. * gnu/installer.scm (compute-keymap-step): Return RESULT. (installer-steps) <'keymap>: Add 'configuration-formatter' field. (installer-program): Use (gnu installer newt keymap). * gnu/installer/parted.scm (bootloader-configuration): Set 'keyboard-layout'.
2019-03-13installer: network: Adjust wording.Ludovic Courtès
* gnu/installer/newt/network.scm (wait-service-online): Adjust wording of the messages.
2019-03-13Remove traces of "GuixSD".Ludovic Courtès
* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Remove mentions of "GuixSD". * gnu/bootloader/grub.scm (install-grub-efi): Likewise. * gnu/build/vm.scm (make-iso9660-image): Change default #:volume-id to "Guix_image". (initialize-hard-disk): Search for the "Guix_image" label. * gnu/ci.scm (system-test-jobs, tarball-jobs): Remove "GuixSD". * gnu/installer/newt/welcome.scm (run-welcome-page): Likewise. * gnu/packages/audio.scm (supercollider)[description]: Likewise. * gnu/packages/curl.scm (curl): Likewise. * gnu/packages/emacs.scm (emacs): Likewise. * gnu/packages/gnome.scm (network-manager): Likewise. * gnu/packages/julia.scm (julia): Likewise. * gnu/packages/linux.scm (alsa-plugins): Likewise. (powertop, wireless-regdb): Likewise. * gnu/packages/package-management.scm (guix): Likewise. * gnu/packages/polkit.scm (polkit): Likewise. * gnu/packages/tex.scm (texlive-bin): Likewise. * gnu/services/base.scm (file-systems->fstab): Likewise. * gnu/services/cups.scm (%cups-activation): Likewise. * gnu/services/mail.scm (%dovecot-activation): Likewise. * gnu/services/messaging.scm (prosody-configuration)[log]: Likewise. * gnu/system/examples/vm-image.tmpl (vm-image-motd): Likewise. * gnu/system/install.scm (installation-os)[file-systems]: Change root file system label to "Guix_image". * gnu/system/mapped-devices.scm (check-device-initrd-modules): Remove "GuixSD". * gnu/system/vm.scm (system-docker-image): Likewise. (system-disk-image)[root-label]: Change to "Guix_image". * gnu/tests/install.scm (run-install): Remove "GuixSD". * guix/modules.scm (guix-module-name?): Likewise. * nix/libstore/optimise-store.cc: Likewise.
2019-02-18gnu: Remove unused TIMEZONE-LISTBOX-HEIGTH.Tobias Geerinckx-Rice
* gnu/installer/newt/timezone.scm (timezone-listbox-heigth): Delete variable.
2019-02-18gnu: Fix some typos in the installer.Tobias Geerinckx-Rice
* gnu/installer/connman.scm (connman-connect-with-auth): Fix typo in documentation. * gnu/installer/newt/keymap.scm (sort-variants): Likewise. * gnu/installer/newt/page.scm (run-listbox-selection-page): Likewise. * gnu/installer/parted.scm (mkpart): Likewise. * gnu/installer/newt/utils.scm (destroy-form-and-pop): Likewise. * gnu/installer/newt/wifi.scm (run-unknown-error-page): Fix typo. (wifi-listbox-heigth): Rename to… (wifi-listbox-height): …this, and adjust caller. * gnu/installer/timezone.scm (locate-childrens): Rename to… (locate-children): …this. Adjust all callers.
2019-01-17installer: Fix manual partitioning.Ludovic Courtès
* gnu/installer/newt/partition.scm (run-partioning-page): When METHOD is 'manual, use 'filter-map' on DEVICES, not 'map', since 'disk-new' can return #f.
2019-01-17installer: "formating" → "formatting".Ludovic Courtès
* gnu/installer/newt/partition.scm, gnu/installer/parted.scm: Replace "formating" with "formatting".
2019-01-17installer: Adjust messages on the final page.Ludovic Courtès
* gnu/installer/newt/final.scm (run-config-display-page) (run-install-success-page, run-install-failed-page): Adjust messages.
2019-01-17installer: partition: Add encryption password confirmation.Mathieu Othacehe
* gnu/installer/newt/partition.scm (prompt-luks-passwords): Add password confirmation page.
2019-01-17installer: keymap: Put English layout and international variant ahead.Mathieu Othacehe
* gnu/installer/newt/keymap.scm (sort-layouts): New procedure, (sort-variants): new procedure, (run-keymap-page): use the two procedures above to sort layouts and variants.
2019-01-17installer: Remove debug popup.Mathieu Othacehe
* gnu/installer/newt/partition.scm (run-partioning-page): Remove debug partition popup.
2019-01-17installer: welcome: Put "Graphical installer" ahead.Mathieu Othacehe
* gnu/installer/newt/welcome.scm (run-welcome-page): Propose "Graphical install" before shell based install.
2019-01-17installer: Rename "Ok" buttons to "OK".Mathieu Othacehe
* gnu/installer/newt/page.scm: s/Ok/OK/. * gnu/installer/newt/partition.scm: Ditto. * gnu/installer/newt/user.scm: Ditto.
2019-01-17installer: Various renamins follow-up.Mathieu Othacehe
s/path/file and s/crypt/encrypt. * gnu/installer/newt/partition.scm: Apply renamings. * gnu/installer/parted.scm: Ditto.
2019-01-17installer: Various renamings.Mathieu Othacehe
1. s/partitionment/partitioning/ 2. s/crypted/encrypted/ * gnu/installer.scm (installer-steps): Apply renamings. * gnu/installer/newt/partition.scm (run-disk-page): ditto, * gnu/installer/parted.scm (auto-partition): ditto, (luks-format-and-open): ditto, (luks-close): ditto, (user-partitions->configuration): ditto.
2019-01-17installer: partionment: Add encryption support.Mathieu Othacehe
* gnu/installer.scm (set-installer-path): Add cryptsetup. * gnu/installer/newt/partition.scm (prompt-luks-passwords): New procedure, (run-partioning-page): Add the possibility to set encryption to "On" on a partition and choose a label, add a new partition scheme: "Guided - using the entire disk with encryption", prompt for encryption passwords before proceeding to formating. * gnu/installer/parted.scm (<user-partition>)[crypt-label], [crypt-password]: New fields, (partition-description): add the encryption label, (user-partition-description): add an encryption field, (auto-partition): add two partitioning schemes: entire-crypted-root and entire-crypted-root-home, (call-with-luks-key-file): new procedure, (user-partition-upper-path): new procedure, (luks-format-and-open): new procedure, (luks-close): new procedure, (format-user-partitions): format and open luks partitions before creating file-system. (mount-user-partitions): use the path returned by user-partition-upper-path, (umount-user-partitions): close the luks partitions, (user-partition->file-system): set device field to label for luks partitions and to uuid for the rest, (user-partition->mapped-device): new procedure, (user-partitions->configuration): add mapped-devices field.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-30 23:24:18 +0000