summary refs log tree commit diff
path: root/gnu/tests/networking.scm
AgeCommit message (Collapse)Author
2023-11-05tests: inetd: Avoid race condition when looking for PID file.Ludovic Courtès
* gnu/tests/networking.scm (run-inetd-test): Use ‘wait-for-file’ instead of ‘file-exists?’. Change-Id: I3e596814485428fb81595d81c4e03519340c6576
2023-10-11services: static-networking: Add support for bonding.Alexey Abramov
* gnu/services/base.scm (<network-link>): Add mac-address field. Set type field to #f by default, so it won't be mandatory. network-link without a type will be used for existing interfaces. (assert-network-link-mac-address, mac-address?): Add sanitizer. Allow valid mac-address or #f. (assert-network-link-type): Add sanitizer. Allow symbol or #f. * gnu/services/base.scm (network-set-up/linux, network-tear-down/linux): Adapt to new structure. * doc/guix.texi (Networking Setup): Document it. * gnu/tests/networking.scm (run-static-networking-advanced-test): New variable. Signed-off-by: Ludovic Courtès <ludo@gnu.org>
2023-05-14tests: dhcpd: Avoid race conditions.Ludovic Courtès
Those tests were racy: it could take a while for those files to appear and for the shepherd service to be up. Thus, wait a little longer for each of them. * gnu/tests/networking.scm (run-dhcpd-test)["pid file exists"] ["lease file exists"]: Use 'wait-for-file'. ["dhcpd is alive"]: Use 'wait-for-service'.
2023-05-11tests: openvswitch: Wait for 'openvswitch-configuration' to be up.Ludovic Courtès
Checking for "br0" should only be done once the 'openvswitch-configuration' service is up because it's the one that sets it up. * gnu/tests/networking.scm (run-openvswitch-test)["openvswitch-configuration is running"]: New test.
2021-12-13tests: static-networking: Adjust to new style.Ludovic Courtès
* gnu/tests/networking.scm (run-static-networking-test)[test]: Remove 'mkdir', 'chdir', and 'exit' calls'. Add 'test-runner-current' call.
2021-12-13Merge branch 'master' into core-updates-frozenLudovic Courtès
2021-12-12tests: Replace uses of deprecated 'static-networking-service'.Ludovic Courtès
* gnu/tests/ganeti.scm (%ganeti-os): Replace call to 'static-networking-service' by instantiating STATIC-NETWORKING-SERVICE-TYPE. * gnu/tests/networking.scm (%test-static-networking) (%openvswitch-os, %dhcpd-os): Likewise.
2021-12-12services: static-networking: Change interface to mimic netlink.Ludovic Courtès
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask] [gateway]: Remove. [addresses, links, routes]: New fields. [requirement]: Default to '(udev). (<network-address>, <network-link>, <network-route>): New record types. (ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove. (ipv6-address?, cidr->netmask, ip+netmask->cidr) (network-set-up/hurd, network-tear-down/hurd) (network-set-up/linux, network-tear-down/linux) (static-networking->hurd-pfinet-options): New procedures. (static-networking-shepherd-service): New procedure. (static-networking-shepherd-services): Rewrite in terms of the above. (static-networking-service): Deprecate. Adjust to new 'static-networking' API. (%base-services): Likewise. * gnu/system/install.scm (%installation-services): Likewise. * gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate 'loopback' from 'networking'. * gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove "servers/socket/2". * gnu/tests/networking.scm (run-openvswitch-test)["networking has started on ovs0"]: Check for 'networking instead of 'networking-ovs0, which is no longer provided. * doc/guix.texi (Networking Setup): Document the new interface. Remove documentation of 'static-networking-service'. (Virtualization Services): Change Ganeti example to use the new interface.
2021-12-12tests: openvswitch: Check whether ovs0 is up.Ludovic Courtès
* gnu/tests/networking.scm (run-openvswitch-test)["ovs0 is up"]: New test.
2021-12-12tests: Add 'static-networking' test.Ludovic Courtès
* gnu/tests/networking.scm (run-static-networking-test): New procedure. (%test-static-networking): New variable.
2021-09-26tests: Reduce boilerplate for users of 'system-test-runner'.Ludovic Courtès
* gnu/tests/audio.scm, gnu/tests/base.scm, gnu/tests/ci.scm, gnu/tests/cups.scm, gnu/tests/databases.scm, gnu/tests/desktop.scm, gnu/tests/dict.scm, gnu/tests/docker.scm, gnu/tests/file-sharing.scm, gnu/tests/ganeti.scm, gnu/tests/guix.scm, gnu/tests/ldap.scm, gnu/tests/linux-modules.scm, gnu/tests/mail.scm, gnu/tests/messaging.scm, gnu/tests/monitoring.scm, gnu/tests/networking.scm, gnu/tests/nfs.scm, gnu/tests/package-management.scm, gnu/tests/reconfigure.scm, gnu/tests/rsync.scm, gnu/tests/security-token.scm, gnu/tests/singularity.scm, gnu/tests/ssh.scm, gnu/tests/telephony.scm, gnu/tests/version-control.scm, gnu/tests/virtualization.scm, gnu/tests/web.scm: Remove (mkdir #$output) (chdir #$output) and pass #$output as argument to 'system-test-runner'.
2021-09-25tests: Adjust to SRFI-64 as found in Guile 3.0.7.Ludovic Courtès
In Guile 3.0.7, 'test-runner-current' is set to #f upon 'test-end'. Consequently, the previous strategy, where we'd call 'test-runner-current' after 'test-end', no longer works. Instead, set the test runner in each test right before 'test-begin'. * gnu/build/marionette.scm (system-test-runner): New procedure. * gnu/tests/audio.scm (run-mpd-test): Replace (exit (= ...)) idiom by (test-runner-current (system-test-runner)). * gnu/tests/base.scm (run-basic-test) (run-cleanup-test, run-mcron-test, run-nss-mdns-test): Likewise. * gnu/tests/ci.scm (run-laminar-test): Likewise. * gnu/tests/cups.scm (run-cups-test): Likewise. * gnu/tests/databases.scm (run-memcached-test) (run-postgresql-test, run-mysql-test): Likewise. * gnu/tests/desktop.scm (run-elogind-test): Likewise. * gnu/tests/dict.scm (run-dicod-test): Likewise. * gnu/tests/docker.scm (run-docker-test): Likewise. (run-docker-system-test): Likewise. * gnu/tests/file-sharing.scm (run-transmission-daemon-test): Likewise. * gnu/tests/ganeti.scm (run-ganeti-test): Likewise. * gnu/tests/guix.scm (run-guix-build-coordinator-test): Likewise. (run-guix-data-service-test): Likewise. * gnu/tests/ldap.scm (run-ldap-test): Likewise. * gnu/tests/linux-modules.scm (run-loadable-kernel-modules-test-base): Likewise. * gnu/tests/mail.scm (run-opensmtpd-test) (run-exim-test, run-dovecot-test, run-getmail-test): Likewise. * gnu/tests/messaging.scm (run-xmpp-test) (run-bitlbee-test, run-quassel-test): Likewise. * gnu/tests/monitoring.scm (run-prometheus-node-exporter-server-test) (run-zabbix-server-test): Likewise. * gnu/tests/networking.scm (run-inetd-test, run-openvswitch-test) (run-dhcpd-test, run-tor-test, run-iptables-test, run-ipfs-test): Likewise. * gnu/tests/nfs.scm (run-nfs-test) (run-nfs-server-test, run-nfs-root-fs-test): Likewise. * gnu/tests/package-management.scm (run-nix-test): Likewise. * gnu/tests/reconfigure.scm (run-switch-to-system-test) (run-upgrade-services-test, run-install-bootloader-test): Likewise. * gnu/tests/rsync.scm (run-rsync-test): Likewise. * gnu/tests/security-token.scm (run-pcscd-test): Likewise. * gnu/tests/singularity.scm (run-singularity-test): Likewise. * gnu/tests/ssh.scm (run-ssh-test): Likewise. * gnu/tests/telephony.scm (run-jami-test): Likewise. * gnu/tests/version-control.scm (run-cgit-test): Likewise. (run-git-http-test, run-gitolite-test, run-gitile-test): Likewise. * gnu/tests/virtualization.scm (run-libvirt-test, run-childhurd-test): Likewise. * gnu/tests/web.scm (run-webserver-test, run-php-fpm-test) (run-hpcguix-web-server-test, run-tailon-test, run-patchwork-test): Likewise.
2021-04-12gnu: tests: Test basic funtionality of the IPFS service.Maxime Devos
It is tested whether the IPFS service listens at the gateway and API ports and whether it is possible to upload and download a bytevector. * gnu/tests/networking.scm (%ipfs-os): New variable. (run-ipfs-test): New procedure. (%test-ipfs): New system test. Signed-off-by: Ludovic Courtès <ludo@gnu.org>
2020-07-11tests: networking: Use 'net.ifnames=0' for the Open vSwitch test.Marius Bakke
* gnu/tests/networking.scm (%openvswitch-os): Override KERNEL-ARGUMENTS.
2020-04-10tests: openvswitch: Use the absolute file name of ovs-vsctl.Marius Bakke
This fixes a regression introduced in 8b9cad01e9619f53dc5a65892ca6a09ca5de3447 where ovs-vsctl would no longer be available in PATH. * gnu/tests/networking.scm (run-openvswitch-test): Qualify "ovs-vsctl" invocation by ungexping the OPENVSWITCH variable instead of assuming it's available on PATH.
2020-03-16tests: dhcpd: Adjust network interface name.Ludovic Courtès
This is a followup to 8e53fe2b91d2776bc1529e7b34967c8f1d9edc32. * gnu/tests/networking.scm (dhcpd-v4-configuration) (%dhcpd-os): Use "ens3" instead of "eth0".
2019-03-31services: Open vSwitch: Provide a default configuration.Marius Bakke
* gnu/services/networking.scm (openvswitch-service-type): Provide OPENVSWITCH-CONFIGURATION as a default value. * gnu/tests/networking.scm (%openvswitch-os): Don't configure the service.
2019-01-11services: Deprecate a few more service procedures.Ludovic Courtès
These procedures were already either undocumented (and de facto deprecated) or documented as deprecated or redundant. * gnu/services/base.scm (guix-service, guix-publish-service): Mark as deprecated. * gnu/services/mcron.scm (mcron-service): Likewise. * gnu/services/networking.scm (tor-service): Likewise. * doc/guix.texi (Scheduled Job Execution): Remove 'mcron-service' and adjust example. (Networking Services): Remove 'tor-service'. * gnu/tests/base.scm (%mcron-os): Use 'mcron-service-type' instead of 'mcron-service'. * gnu/tests/networking.scm (%tor-os): Use 'tor-service-type' instead of 'tor-service'. * tests/guix-system.sh: Likewise.
2018-10-18services: dhcp-client: Deprecate 'dhcp-client-service' procedure.Ludovic Courtès
* gnu/services/networking.scm (dhcp-client-service-type): Add default value. * gnu/system/examples/bare-bones.tmpl: Use (service dhcp-client-service-type) instead of (dhcp-client-service). * gnu/system/examples/beaglebone-black.tmpl: Likewise. * gnu/tests/base.scm (%avahi-os): Likewise. * gnu/tests/databases.scm (%memcached-os): Likewise. (%mongodb-os): Likewise. * gnu/tests/dict.scm (%dicod-os): Likewise. * gnu/tests/mail.scm (%opensmtpd-os): Likewise. (%exim-os): Likewise. (%dovecot-os): Likewise. * gnu/tests/messaging.scm (run-xmpp-test): Likewise. (run-bitlbee-test): Likewise. * gnu/tests/monitoring.scm (%prometheus-node-exporter-os): Likewise. * gnu/tests/networking.scm (%inetd-os): Likewise. (run-iptables-test): Likewise. * gnu/tests/nfs.scm (%base-os): Likewise. * gnu/tests/rsync.scm (%rsync-os): Likewise. * gnu/tests/ssh.scm (run-ssh-test): Likewise. * gnu/tests/version-control.scm (%cgit-os): Likewise. (%git-http-os): Likewise. (%gitolite-os): Likewise. * gnu/tests/virtualization.scm (%libvirt-os): Likewise. * gnu/tests/web.scm (%httpd-os): Likewise. (%nginx-os): Likewise. (%varnish-os): Likewise. (%php-fpm-os): Likewise. (%hpcguix-web-os): Likewise. (%tailon-os): Likewise. * tests/guix-system.sh: Likewise. * doc/guix.texi (Networking Services): Document 'dhcp-client-service-type' and remove 'dhcp-client-service'.
2018-09-20gnu: services: Add iptables service.Arun Isaac
* gnu/services/networking.scm (<iptables-configuration>): New record type. (iptables-service-type): New variable. * gnu/tests/networking.scm (run-iptables-test): New procedure. (%test-iptables): New variable. * doc/guix.texi (Networking Services): Document it.
2018-08-28services: tor: Make it easier to use UNIX sockets.Chris Marusich
* doc/guix.texi (Networking Services): Document it, and mention that tor-service is deprecated. * gnu/services/networking.scm (<tor-configuration>) <socks-socket-type>: New field. (tor-configuration->torrc): When socks-socket-type is 'unix, set SocksPort to UNIX domain socket /var/run/tor/socks-sock and set UnixSocksGroupWritable to 1. * gnu/tests/networking.scm (%tor-os/unix-socks-socket): Instead of using a custom config file, just set socks-socket-type to 'unix.
2018-08-28tests: tor: Add more test cases.Chris Marusich
* gnu/tests/networking.scm (%tor-os/unix-socks-socket): New variable. (run-tor-test) <os/unix-socks-socket, marionette/unix-socks-socket> <socket-directory>: New variables. <"tor is alive">: Move common code from this test case... <tor-is-alive?>: ...into this new procedure. <"tor is listening", "tor is alive, even when using a SOCKS socket"> <"tor is listening, even when using a SOCKS socket">: New test cases.
2018-08-28services: tor: Add a system test.Chris Marusich
* gnu/services/networking.scm (tor-configuration->torrc): Set PidFile to /var/run/tor/tor.pid in the base torrc configuration. (tor-shepherd-service) <start>: Call make-forkexec-constructor/container with a new #:pid-file argument to tell Shepherd where to find the PID file. Add a a new <file-system-mapping> to its existing #:mappings argument to share /var/run/tor with the the container. (tor-hidden-services-activation): Update docstring. Create /var/run/tor and set its permissions so only the tor user can access it. * gnu/tests/networking.scm (%test-tor, %tor-os): New variables. (run-tor-test): New procedure.
2018-04-30services: Add modem-manager-service-type.Danny Milosavljevic
* gnu/services/networking.scm (modem-manager-service-type): New variable. (<modem-manager-configuration>): New variable. (modem-manager-configuration): New procedure. (modem-manager-configuration?): New procedure. * doc/guix.texi (Networking Services): Document it. * gnu/tests/networking.scm: Import (gnu services base).
2018-04-21services: Add dhcpd-service-type and <dhcpd-configuration>.Chris Marusich
* doc/guix.texi (Networking Services): Document it. * gnu/services/networking.scm (dhcpd-service-type): Add it. (dhcpd-configuration, dhcpd-configuration?): Add it. (dhcpd-configuration-package): Add it. (dhcpd-configuration-config-file): Add it. (dhcpd-configuration-version): Add it. (dhcpd-configuration-run-directory): Add it. (dhcpd-configuration-lease-file): Add it. (dhcpd-configuration-pid-file): Add it. (dhcpd-configuration-interfaces): Add it. * gnu/tests/networking.scm (minimal-dhcpd-v4-config-file) (dhcpd-v4-configuration, %dhcpd-os, run-dhcpd-test, %test-dhcpd): New variables.
2017-12-29tests: networking: Add tests for Open vSwitch.Marius Bakke
* gnu/tests/networking.scm (openvswitch-configuration-service, %openvswitch-os): New variables. (setup-openvswitch, run-openvswitch-test): New procedures. (%test-openvswitch): New public variable.
2017-07-20tests: Use 'virtual-machine' records instead of monadic procedures.Ludovic Courtès
* gnu/tests/base.scm (%test-basic-os): Use 'let*' instead of 'mlet*' and 'virtual-machine' instead of 'system-qemu-image/shared-store-script'. (run-mcron-test): Likewise. (run-nss-mdns-test): Likewise. * gnu/tests/dict.scm (run-dicod-test): Likewise. * gnu/tests/mail.scm (run-opensmtpd-test): Likewise. (run-exim-test): Likewise. * gnu/tests/messaging.scm (run-xmpp-test): Likewise. * gnu/tests/networking.scm (run-inetd-test): Likewise. * gnu/tests/nfs.scm (run-nfs-test): Likewise. * gnu/tests/ssh.scm (run-ssh-test): Likewise. * gnu/tests/web.scm (run-nginx-test): Likewise.
2017-04-01tests: Introduce 'simple-operating-system' and use it.Ludovic Courtès
* gnu/tests.scm (%simple-os): New macro. (simple-operating-system): New macro. * gnu/tests/base.scm (%simple-os): Define using 'simple-operating-system'. (%mcron-os): Use 'simple-operating-system'. * gnu/tests/mail.scm (%opensmtpd-os): Likewise. * gnu/tests/messaging.scm (%base-os, os-with-service): Remove. (run-xmpp-test): Use 'simple-operating-system'. * gnu/tests/networking.scm (%inetd-os): Likewise. * gnu/tests/ssh.scm (%base-os, os-with-service): Remove. (run-ssh-test): Use 'simple-operating-system'. * gnu/tests/web.scm (%nginx-os): Likewise.
2017-03-24services: Add inetd-service-type.Thomas Danckaert
* gnu/services/networking.scm (<inetd-configuration>, <inetd-entry>): New record types. (inetd-config-file, inetd-shepherd-service): New procedures. (inetd-service-type): New variable. * doc/guix.texi (Networking Services): Document it. * gnu/tests/networking.scm: New file. * gnu/local.mk: Add it.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-12-21 10:11:38 +0000