From cc765e478affbb8085c7768a06dab9e13fe4eb86 Mon Sep 17 00:00:00 2001 From: Nicolas Goaziou Date: Fri, 24 Apr 2020 18:32:56 +0200 Subject: doc: cookbook: Fix misuses of double spacing. * doc/guix-cookbook.texi (Extended example): (StumpWM): (Basic setup with manifests): Prevent Texinfo from ending a sentence where it should not. (Setting up a bind mount): Add two spaces where needed. --- doc/guix-cookbook.texi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/doc/guix-cookbook.texi b/doc/guix-cookbook.texi index 5d126acd3d..8e9c82ff15 100644 --- a/doc/guix-cookbook.texi +++ b/doc/guix-cookbook.texi @@ -1080,7 +1080,7 @@ mechanism of passing code around two running processes is called @uref{https://a @subsubsection Utility functions When customizing @code{phases}, we often need to write code that mimics the -equivalent system invocations (@code{make}, @code{mkdir}, @code{cp}, etc.) commonly used during +equivalent system invocations (@code{make}, @code{mkdir}, @code{cp}, etc.)@: commonly used during regular ``Unix-style'' installations. Some like @code{chmod} are native to Guile. @@ -1576,7 +1576,7 @@ available for inclusion into the initrd. You could install StumpWM with a Guix system by adding @code{stumpwm-checkout} and optionally @code{`(,stumpwm-checkout "lib")} -packages to a system configuration file, e.g. @file{/etc/config.scm}. +packages to a system configuration file, e.g.@: @file{/etc/config.scm}. An example configuration can look like this: @@ -1620,7 +1620,7 @@ Then you need to add the following code to a StumpWM configuration file @section Setting up a bind mount To bind mount a file system, one must first set up some definitions -before the @code{operating-system} section of the system definition. In +before the @code{operating-system} section of the system definition. In this example we will bind mount a folder from a spinning disk drive to @code{/tmp}, to save wear and tear on the primary SSD, without dedicating an entire partition to be mounted as @code{/tmp}. @@ -1792,7 +1792,7 @@ where we will store our profiles in the rest of this article. Placing all your profiles in a single directory, with each profile getting its own sub-directory, is somewhat cleaner. This way, each sub-directory will contain all the symlinks for precisely one profile. Besides, "looping over -profiles" becomes obvious from any programming language (e.g. a shell script) by +profiles" becomes obvious from any programming language (e.g.@: a shell script) by simply looping over the sub-directories of @samp{$GUIX_EXTRA_PROFILES}. Note that it's also possible to loop over the output of @@ -1862,7 +1862,7 @@ guix package -m /path/to/guix-my-project-manifest.scm -p "$GUIX_EXTRA_PROFILES"/ To upgrade all profiles, it's easy enough to loop over them. For instance, assuming your manifest specifications are stored in @samp{~/.guix-manifests/guix-$profile-manifest.scm}, with @samp{$profile} being the name -of the profile (e.g. "project1"), you could do the following in Bourne shell: +of the profile (e.g.@: "project1"), you could do the following in Bourne shell: @example for profile in "$GUIX_EXTRA_PROFILES"/*; do -- cgit 1.4.1 From 2c8305d1406c0a17f70e55733c39193aef528005 Mon Sep 17 00:00:00 2001 From: Nicolas Goaziou Date: Fri, 24 Apr 2020 18:40:04 +0200 Subject: doc: cookbook: Use @file for file names and extensions. * doc/guix-cookbook.texi (@samp{GUIX_PACKAGE_PATH}): (Extended example): (Setting up a bind mount): (Basic setup with manifests): (Default profile): Use @file instead of @samp or @code for file names and extensions. --- doc/guix-cookbook.texi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/doc/guix-cookbook.texi b/doc/guix-cookbook.texi index 8e9c82ff15..3f18c41542 100644 --- a/doc/guix-cookbook.texi +++ b/doc/guix-cookbook.texi @@ -581,7 +581,7 @@ packages. Guix makes it possible to streamline the process by adding as many ``package declaration directories'' as you want. -Create a directory, say @samp{~./guix-packages} and add it to the @samp{GUIX_PACKAGE_PATH} +Create a directory, say @file{~./guix-packages} and add it to the @samp{GUIX_PACKAGE_PATH} environment variable: @example @@ -851,7 +851,7 @@ version when packaging programs for a specific commit. @subsubsection Snippets Snippets are quoted (i.e. non-evaluated) Scheme code that are a means of patching -the source. They are a Guix-y alternative to the traditional @samp{.patch} files. +the source. They are a Guix-y alternative to the traditional @file{.patch} files. Because of the quote, the code in only evaluated when passed to the Guix daemon for building. There can be as many snippets as needed. @@ -955,7 +955,7 @@ $ make CC=gcc prefix=/gnu/store/...- This sets the C compiler to @code{gcc} and the @code{prefix} variable (the installation directory in Make parlance) to @code{(assoc-ref %outputs "out")}, which is a build-stage global variable pointing to the destination directory in the store (something like -@samp{/gnu/store/...-my-libgit2-20180408}). +@file{/gnu/store/...-my-libgit2-20180408}). Similarly, it's possible to set the configure flags: @@ -1622,8 +1622,8 @@ Then you need to add the following code to a StumpWM configuration file To bind mount a file system, one must first set up some definitions before the @code{operating-system} section of the system definition. In this example we will bind mount a folder from a spinning disk drive to -@code{/tmp}, to save wear and tear on the primary SSD, without -dedicating an entire partition to be mounted as @code{/tmp}. +@file{/tmp}, to save wear and tear on the primary SSD, without +dedicating an entire partition to be mounted as @file{/tmp}. First, the source drive that hosts the folder we wish to bind mount should be defined, so that the bind mount can depend on it. @@ -1801,9 +1801,9 @@ Note that it's also possible to loop over the output of guix package --list-profiles @end example -although you'll probably have to filter out @samp{~/.config/guix/current}. +although you'll probably have to filter out @file{~/.config/guix/current}. -To enable all profiles on login, add this to your @samp{~/.bash_profile} (or similar): +To enable all profiles on login, add this to your @file{~/.bash_profile} (or similar): @example for i in $GUIX_EXTRA_PROFILES/*; do @@ -1817,8 +1817,8 @@ done @end example Note to Guix System users: the above reflects how your default profile -@samp{~/.guix-profile} is activated from @samp{/etc/profile}, that latter being loaded by -@samp{~/.bashrc} by default. +@file{~/.guix-profile} is activated from @file{/etc/profile}, that latter being loaded by +@file{~/.bashrc} by default. You can obviously choose to only enable a subset of them: @@ -1861,7 +1861,7 @@ guix package -m /path/to/guix-my-project-manifest.scm -p "$GUIX_EXTRA_PROFILES"/ To upgrade all profiles, it's easy enough to loop over them. For instance, assuming your manifest specifications are stored in -@samp{~/.guix-manifests/guix-$profile-manifest.scm}, with @samp{$profile} being the name +@file{~/.guix-manifests/guix-$profile-manifest.scm}, with @samp{$profile} being the name of the profile (e.g.@: "project1"), you could do the following in Bourne shell: @example @@ -1921,7 +1921,7 @@ The same is true for @samp{INFOPATH} (you can install @samp{info-reader}), @node Default profile @subsection Default profile -What about the default profile that Guix keeps in @samp{~/.guix-profile}? +What about the default profile that Guix keeps in @file{~/.guix-profile}? You can assign it the role you want. Typically you would install the manifest of the packages you want to use all the time. -- cgit 1.4.1 From bf37b49cdd345bcedeb7142f61968d3a6e15e8d8 Mon Sep 17 00:00:00 2001 From: Raghav Gururajan Date: Fri, 24 Apr 2020 15:33:15 -0400 Subject: gnu: spacefm: Add dependencies for extra functionality. * gnu/packages/lxde.scm (spacefm): Add dependencies for extra functionality. Adding these inputs and making required changes to build-system+arguments; provides icons, privilege-management and disk-management. --- gnu/packages/lxde.scm | 50 ++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 36 insertions(+), 14 deletions(-) diff --git a/gnu/packages/lxde.scm b/gnu/packages/lxde.scm index f5dc027e03..9de96a21cb 100644 --- a/gnu/packages/lxde.scm +++ b/gnu/packages/lxde.scm @@ -29,13 +29,16 @@ #:use-module (gnu packages) #:use-module (gnu packages autotools) #:use-module (gnu packages bash) + #:use-module (gnu packages disk) #:use-module (gnu packages docbook) + #:use-module (gnu packages file-systems) #:use-module (gnu packages freedesktop) #:use-module (gnu packages gettext) #:use-module (gnu packages glib) #:use-module (gnu packages gnome) #:use-module (gnu packages gtk) #:use-module (gnu packages image-viewers) + #:use-module (gnu packages libusb) #:use-module (gnu packages linux) #:use-module (gnu packages lsof) #:use-module (gnu packages openbox) @@ -43,9 +46,12 @@ #:use-module (gnu packages polkit) #:use-module (gnu packages text-editors) #:use-module (gnu packages video) + #:use-module (gnu packages wget) #:use-module (gnu packages wm) + #:use-module (gnu packages xdisorg) #:use-module (gnu packages xml) #:use-module (gnu packages xorg) + #:use-module (guix build-system glib-or-gtk) #:use-module (guix build-system gnu) #:use-module (guix build-system trivial) #:use-module (guix download) @@ -249,8 +255,8 @@ with freedesktop.org standard.") "https://github.com/IgnorantGuru/spacefm/archive/" version ".tar.gz")) (sha256 - (base32 - "1jg7xfyr7kihjnalxp8wxyb9qjk8hqf5l36rp3s0lvkpmpyakppy")) + (base32 + "1jg7xfyr7kihjnalxp8wxyb9qjk8hqf5l36rp3s0lvkpmpyakppy")) (modules '((guix build utils))) (snippet '(begin @@ -262,18 +268,34 @@ with freedesktop.org standard.") "#include \n"))) #t)) (file-name (string-append name "-" version ".tar.gz")))) - (build-system gnu-build-system) - (native-inputs `(("pkg-config" ,pkg-config) - ("desktop-file-utils" ,desktop-file-utils) - ("intltool" ,intltool))) - (inputs `(("bash" ,bash) - ("gtk+" ,gtk+) - ("eudev" ,eudev) - ("shared-mime-info" ,shared-mime-info) - ("ffmpegthumbnailer" ,ffmpegthumbnailer) - ("jmtpfs" ,jmtpfs) - ("lsof" ,lsof) - ("udisks" ,udisks))) + (build-system glib-or-gtk-build-system) + (native-inputs + `(("desktop-file-utils" ,desktop-file-utils) + ("glib:bin" ,glib "bin") + ("gtk+:bin" ,gtk+ "bin") + ("intltool" ,intltool) + ("pkg-config" ,pkg-config))) + (inputs + `(("bash" ,bash) + ("cairo" ,cairo) + ("curlftpfs" ,curlftpfs) + ("dbus" ,dbus) + ("eudev" ,eudev) + ("fakeroot" ,fakeroot) + ("ffmpegthumbnailer" ,ffmpegthumbnailer) + ("fuseiso" ,fuseiso) + ("glib" ,glib) + ("gtk+" ,gtk+) + ("ifuse" ,ifuse) + ("jmtpfs" ,jmtpfs) + ("libx11" ,libx11) + ("lsof" ,lsof) + ("pango" ,pango) + ("shared-mime-info" ,shared-mime-info) + ("startup-notification" ,startup-notification) + ("udevil" ,udevil) + ("util-linux" ,util-linux) + ("wget" ,wget))) (arguments `(#:configure-flags (list (string-append "--with-bash-path=" (assoc-ref %build-inputs "bash") -- cgit 1.4.1 From ddb0fef5544800c6c8be11682b9771ee03f465cc Mon Sep 17 00:00:00 2001 From: Raghav Gururajan Date: Fri, 24 Apr 2020 22:10:57 +0200 Subject: gnu: Add ktsuss. * gnu/packages/admin.scm (ktsuss): New variable. Signed-off-by: Nicolas Goaziou --- gnu/packages/admin.scm | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/gnu/packages/admin.scm b/gnu/packages/admin.scm index 619a419170..236eebe53c 100644 --- a/gnu/packages/admin.scm +++ b/gnu/packages/admin.scm @@ -52,6 +52,7 @@ (define-module (gnu packages admin) #:use-module (guix build-system cmake) #:use-module (guix build-system emacs) + #:use-module (guix build-system glib-or-gtk) #:use-module (guix build-system gnu) #:use-module (guix build-system meson) #:use-module (guix build-system perl) @@ -64,6 +65,7 @@ #:use-module (guix utils) #:use-module (gnu packages) #:use-module (gnu packages algebra) + #:use-module (gnu packages autogen) #:use-module (gnu packages autotools) #:use-module (gnu packages base) #:use-module (gnu packages bash) @@ -128,6 +130,52 @@ #:use-module (gnu packages xml) #:use-module (gnu packages xorg)) +(define-public ktsuss + (package + (name "ktsuss") + (version "2.1") + (source + (origin + (method git-fetch) + (uri + (git-reference + (url "https://github.com/nomius/ktsuss.git") + (commit version))) + (sha256 + (base32 "0q9931f9hp47v1n8scli4bdg2rkjpf5jf8v7jj2gdn83aia1r2hz")) + (file-name (git-file-name name version)))) + (build-system glib-or-gtk-build-system) + (arguments + `(#:configure-flags + (list "--enable-sudo=yes") + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'patch-sudo-path + (lambda* (#:key inputs #:allow-other-keys) + (substitute* "configure.ac" + (("sudopath=`which sudo 2>/dev/null`") + (string-append "sudopath=" + (string-append (assoc-ref inputs "sudo") + "/bin/sudo")))) + #t))))) + (native-inputs + `(("autoconf" ,autoconf) + ("autogen" ,autogen) + ("automake" ,automake) + ("libtool" ,libtool) + ("pkg-config" ,pkg-config))) + (inputs + `(("glib" ,glib) + ("gtk+" ,gtk+-2) + ("sudo" ,sudo))) + (synopsis "Graphical front end for @command{su}") + (description + "Ktsuss stands for ``Keep the @command{su} simple, stupid''. +It is a graphical version of @command{su} written in C and GTK+ 2, with +simplicity in mind.") + (home-page "https://github.com/nomius/ktsuss") + (license license:bsd-3))) + (define-public aide (package (name "aide") -- cgit 1.4.1 From 5e5796765205304bca3ec20a0c9431f586a8222c Mon Sep 17 00:00:00 2001 From: Marius Bakke Date: Fri, 24 Apr 2020 18:46:08 +0200 Subject: gnu: python-pytest-timeout: Update to 1.3.4. * gnu/packages/check.scm (python-pytest-timeout): Update to 1.3.4. [arguments]: Override check phase. [native-inputs]: Add PYTHON-PEXPECT. --- gnu/packages/check.scm | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/gnu/packages/check.scm b/gnu/packages/check.scm index 1cd40d9b13..5f3073d556 100644 --- a/gnu/packages/check.scm +++ b/gnu/packages/check.scm @@ -1008,17 +1008,26 @@ result back.") (define-public python-pytest-timeout (package (name "python-pytest-timeout") - (version "1.3.3") + (version "1.3.4") (source (origin (method url-fetch) (uri (pypi-uri "pytest-timeout" version)) (sha256 (base32 - "1cczcjhw4xx5sjkhxlhc5c1bkr7x6fcyx12wrnvwfckshdvblc2a")))) + "13n42azbvs5slvy2n1a9nw17r4qdq10dd68nln3jp925safa3yl0")))) (build-system python-build-system) + (arguments + '(#:phases (modify-phases %standard-phases + (replace 'check + (lambda* (#:key inputs outputs #:allow-other-keys) + ;; Make the installed plugin discoverable by Pytest. + (add-installed-pythonpath inputs outputs) + (invoke "pytest" "-vv")))))) (propagated-inputs `(("python-pytest" ,python-pytest))) + (native-inputs + `(("python-pexpect" ,python-pexpect))) (home-page "http://bitbucket.org/pytest-dev/pytest-timeout/") (synopsis "Plugin for py.test to abort hanging tests") (description -- cgit 1.4.1 From 45320ad808864f483a874788fc3850aee35f3129 Mon Sep 17 00:00:00 2001 From: Jack Hill Date: Fri, 24 Apr 2020 16:04:02 -0400 Subject: gnu: pdfpc: Upgrade to 4.4.0 * gnu/packages/pdf.scm (pdfpc): Upgrade to 4.4.0. Signed-off-by: Marius Bakke --- gnu/packages/pdf.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/pdf.scm b/gnu/packages/pdf.scm index f23f1e34e3..a7d7ee1c11 100644 --- a/gnu/packages/pdf.scm +++ b/gnu/packages/pdf.scm @@ -1232,7 +1232,7 @@ multiple files.") (define-public pdfpc (package (name "pdfpc") - (version "4.3.4") + (version "4.4.0") (source (origin (method git-fetch) @@ -1241,7 +1241,7 @@ multiple files.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "07aafsm4jzdgpahz83p0ajv40hry7gviyadqi13ahr8xdhhwy2sd")))) + (base32 "0vh2r32akvasdrghkaq7ard24r2qncp34jfiyshi3zxabm9bhfaa")))) (build-system cmake-build-system) (arguments '(#:tests? #f)) ; no test target (inputs -- cgit 1.4.1 From 9c8b5d5e088bf78f9283f7b7f767a6cb10b3364f Mon Sep 17 00:00:00 2001 From: Mark H Weaver Date: Fri, 24 Apr 2020 18:06:14 -0400 Subject: gnu: linux-libre@4.4: Update to 4.4.220. * gnu/packages/linux.scm (linux-libre-4.4-version): Update to 4.4.220. (linux-libre-4.4-pristine-source): Update hash. --- gnu/packages/linux.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm index 4b776ae5f7..46340aa531 100644 --- a/gnu/packages/linux.scm +++ b/gnu/packages/linux.scm @@ -409,10 +409,10 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (%upstream-linux-source version hash) deblob-scripts-4.9))) -(define-public linux-libre-4.4-version "4.4.219") +(define-public linux-libre-4.4-version "4.4.220") (define-public linux-libre-4.4-pristine-source (let ((version linux-libre-4.4-version) - (hash (base32 "1mpxqb2m24ay4n9px4n2cyklxy4lhnv9q6wlvilx13rs5qfbb62f"))) + (hash (base32 "1knj3qsl7x3fysdz1h0s980ddbafs3658z2y67w6sn79wp7d8blg"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.4))) -- cgit 1.4.1 From 0c8941b50410e3dd4d81093e67571a7af5e9496d Mon Sep 17 00:00:00 2001 From: Mark H Weaver Date: Fri, 24 Apr 2020 18:07:18 -0400 Subject: gnu: linux-libre@4.9: Update to 4.9.220. * gnu/packages/linux.scm (linux-libre-4.9-version): Update to 4.9.220. (linux-libre-4.9-pristine-source): Update hash. --- gnu/packages/linux.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm index 46340aa531..3bd6e2d8af 100644 --- a/gnu/packages/linux.scm +++ b/gnu/packages/linux.scm @@ -401,10 +401,10 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (%upstream-linux-source version hash) deblob-scripts-4.14))) -(define-public linux-libre-4.9-version "4.9.219") +(define-public linux-libre-4.9-version "4.9.220") (define-public linux-libre-4.9-pristine-source (let ((version linux-libre-4.9-version) - (hash (base32 "0i5wlyp11ss9p035bhq73xjx8iyk5dk4ynvd7msw5qfkrs6265vb"))) + (hash (base32 "0bhbkybzbdsbmrjmb5m7hxxl8b3v6n79zhh86cbr95kzg1hcgnfs"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.9))) -- cgit 1.4.1 From 1317ff32591ff39c125d599b3bae9d7f2d07e79f Mon Sep 17 00:00:00 2001 From: Mark H Weaver Date: Fri, 24 Apr 2020 18:07:54 -0400 Subject: gnu: linux-libre@4.14: Update to 4.14.177. * gnu/packages/linux.scm (linux-libre-4.14-version): Update to 4.14.177. (linux-libre-4.14-pristine-source): Update hash. --- gnu/packages/linux.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm index 3bd6e2d8af..de8906a153 100644 --- a/gnu/packages/linux.scm +++ b/gnu/packages/linux.scm @@ -393,10 +393,10 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (%upstream-linux-source version hash) deblob-scripts-4.19))) -(define-public linux-libre-4.14-version "4.14.176") +(define-public linux-libre-4.14-version "4.14.177") (define-public linux-libre-4.14-pristine-source (let ((version linux-libre-4.14-version) - (hash (base32 "18jwxhf29ax54xnylmz9zfkslnxw7y3h215dbfmmvddfp9b0kbmw"))) + (hash (base32 "04hq0i06mg2yc09jj2xk0vhf5q9yigzjzm55a5bvfy2a6j43r9rk"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.14))) -- cgit 1.4.1 From 0d36d0baea509259f39df50dc55b53d90d2de7a8 Mon Sep 17 00:00:00 2001 From: Arun Isaac Date: Wed, 22 Apr 2020 18:56:26 +0530 Subject: gnu: Add maradns. * gnu/packages/dns.scm (maradns): New variable. --- gnu/packages/dns.scm | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/gnu/packages/dns.scm b/gnu/packages/dns.scm index 0f7227ad03..80ed1f0b49 100644 --- a/gnu/packages/dns.scm +++ b/gnu/packages/dns.scm @@ -14,6 +14,7 @@ ;;; Copyright © 2019 Chris Marusich ;;; Copyright © 2019 Rutger Helling ;;; Copyright © 2020 Pierre Langlois +;;; Copyright © 2020 Arun Isaac ;;; ;;; This file is part of GNU Guix. ;;; @@ -949,3 +950,50 @@ could) directly register names in the Domain Name System (DNS). Some examples of public suffixes are .com, .co.uk and pvt.k12.ma.us. This is a list of all known public suffixes.") (license license:mpl2.0)))) + +(define-public maradns + (package + (name "maradns") + (version "3.5.0004") + (source + (origin + (method url-fetch) + (uri (string-append "https://maradns.samiam.org/download/" + (version-major+minor version) "/" + version "/maradns-" version ".tar.xz")) + (sha256 + (base32 + "1zv0i6m4m05ay5zlhwq1h88hgjq2d81cjanpnb3gyhr0xhmjwk6a")))) + (build-system gnu-build-system) + (arguments + `(#:tests? #f ; need to be root to run tests + #:make-flags + (list + (string-append "CC=" + (if ,(%current-target-system) + (string-append (assoc-ref %build-inputs "cross-gcc") + "/bin/" ,(%current-target-system) "-gcc") + "gcc")) + (string-append "PREFIX=" %output) + (string-append "RPM_BUILD_ROOT=" %output)) + #:phases + (modify-phases %standard-phases + (replace 'configure + (lambda _ + (invoke "./configure"))) + (add-before 'install 'create-install-directories + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (for-each (lambda (dir) + (mkdir-p (string-append out dir))) + (list "/bin" "/sbin" "/etc" + "/share/man/man1" + "/share/man/man5" + "/share/man/man8")) + #t)))))) + (home-page "https://maradns.samiam.org") + (synopsis "Small lightweight DNS server") + (description "MaraDNS is a small and lightweight DNS server. MaraDNS +consists of a UDP-only authoritative DNS server for hosting domains, and a UDP +and TCP-capable recursive DNS server for finding domains on the internet.") + (license license:bsd-2))) -- cgit 1.4.1 From c10e8cf75e34f4f4fb9555555932130e04b12ba6 Mon Sep 17 00:00:00 2001 From: Pierre Langlois Date: Tue, 14 Apr 2020 23:14:01 -0700 Subject: gnu: u-boot: Update to 2020.04. * gnu/packages/bootloaders (u-boot): Update to 2020.04. [native-inputs]: Replace sdl with sdl2. Co-authored-by: Vagrant Cascadian --- gnu/packages/bootloaders.scm | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/gnu/packages/bootloaders.scm b/gnu/packages/bootloaders.scm index 2a6e0707b2..666562762f 100644 --- a/gnu/packages/bootloaders.scm +++ b/gnu/packages/bootloaders.scm @@ -12,6 +12,7 @@ ;;; Copyright © 2019 Mathieu Othacehe ;;; Copyright © 2020 Björn Höfling ;;; Copyright © 2018, 2019, 2020 Vagrant Cascadian +;;; Copyright © 2020 Pierre Langlois ;;; ;;; This file is part of GNU Guix. ;;; @@ -400,7 +401,7 @@ tree binary files. These are board description files used by Linux and BSD.") (define u-boot (package (name "u-boot") - (version "2020.01") + (version "2020.04") (source (origin (method url-fetch) (uri (string-append @@ -408,7 +409,7 @@ tree binary files. These are board description files used by Linux and BSD.") "u-boot-" version ".tar.bz2")) (sha256 (base32 - "1w9ml4jl15q6ixpdqzspxjnl7d3rgxd7f99ms1xv5c8869h3qida")))) + "0wjkasnz87q86hx93inspdjfjsinmxi87bcvj30c773x0fpjlwzy")))) (native-inputs `(("bc" ,bc) ("bison" ,bison) @@ -419,7 +420,7 @@ tree binary files. These are board description files used by Linux and BSD.") ("python" ,python) ("python-coverage" ,python-coverage) ("python-pytest" ,python-pytest) - ("sdl" ,sdl) + ("sdl2" ,sdl2) ("swig" ,swig))) (build-system gnu-build-system) (home-page "https://www.denx.de/wiki/U-Boot/") -- cgit 1.4.1 From f2ce2d1274a94246e20d85ecdd375b2450ebb11b Mon Sep 17 00:00:00 2001 From: Mark H Weaver Date: Fri, 24 Apr 2020 19:05:02 -0400 Subject: gnu: linux-libre@5.6: Update deblob scripts. * gnu/packages/linux.scm (deblob-scripts-5.6): Update to 5.6.7. --- gnu/packages/linux.scm | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm index de8906a153..f2d45eb07a 100644 --- a/gnu/packages/linux.scm +++ b/gnu/packages/linux.scm @@ -194,9 +194,9 @@ defconfig. Return the appropriate make target if applicable, otherwise return (define deblob-scripts-5.6 (linux-libre-deblob-scripts - "5.6" - (base32 "09hxrr4xzllq5lmipfb6if30318lksrk9py1axc36m9ynql4w0rc") - (base32 "09qz5d31g5zwicsnncjnjij193hk0g6kg0ss9jyzh6lp3wilcm71"))) + "5.6.7" + (base32 "196fdbfy1f8zbmnv0ik720snig2bacsh7hfyvgbmlsfk3cil2zgv") + (base32 "1g0bi3c8xzy1vz6w1xbpkb3a26bqn9d1yphcqz2ki4aikra81wid"))) (define deblob-scripts-5.4 (linux-libre-deblob-scripts -- cgit 1.4.1 From f84b0363053e5479464f6ce6ded45f80360d90fc Mon Sep 17 00:00:00 2001 From: Mark H Weaver Date: Fri, 24 Apr 2020 17:08:44 -0400 Subject: gnu: webkitgtk: Update to 2.28.2. * gnu/packages/webkit.scm (webkitgtk): Update to 2.28.2. --- gnu/packages/webkit.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/webkit.scm b/gnu/packages/webkit.scm index 0bf3d5dd72..e52536c279 100644 --- a/gnu/packages/webkit.scm +++ b/gnu/packages/webkit.scm @@ -121,14 +121,14 @@ engine that uses Wayland for graphics output.") (define-public webkitgtk (package (name "webkitgtk") - (version "2.28.1") + (version "2.28.2") (source (origin (method url-fetch) (uri (string-append "https://www.webkitgtk.org/releases/" "webkitgtk-" version ".tar.xz")) (sha256 (base32 - "1n7k4yriqhr38f4fgy8pzdn1nm60m53z8p478sgg64swxnijdg5c")))) + "1g9hik3bprki5s9d7y5288q5irwckbzajr6rnlvjrlnqrwjkblmr")))) (build-system cmake-build-system) (outputs '("out" "doc")) (arguments -- cgit 1.4.1 From 8cf6d150b4492145369cb8d39f54ad98d3b27301 Mon Sep 17 00:00:00 2001 From: Pierre Neidhardt Date: Sat, 25 Apr 2020 19:45:29 +0200 Subject: gnu: Add osicat. * gnu/packages/lisp-xyz.scm (closicat, sbcl-osicat): New variables. --- gnu/packages/lisp-xyz.scm | 51 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/gnu/packages/lisp-xyz.scm b/gnu/packages/lisp-xyz.scm index 40852440b1..cc9bda8ac6 100644 --- a/gnu/packages/lisp-xyz.scm +++ b/gnu/packages/lisp-xyz.scm @@ -11417,3 +11417,54 @@ MOP easier to use.") (define-public cl-moptilities (sbcl-package->cl-source-package sbcl-moptilities)) + +(define-public sbcl-osicat + (let ((commit "de0c18a367eedc857e1902a7319828af072a0d97")) + (package + (name "sbcl-osicat") + (version (git-version "0.7.0" "1" commit)) + (home-page "http://www.common-lisp.net/project/osicat/") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/osicat/osicat") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "15viw5pi5sa7qq9b4n2rr3dj2jkqr180rh9z1lh8w3rgl42i2adc")))) + (build-system asdf-build-system/sbcl) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-before 'validate-runpath 'cleanup-files + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (lib (string-append out "/lib/sbcl"))) + (for-each + delete-file + (filter (lambda (file) + (not (member (basename file) + '("basic-unixint__grovel" + "libosicat.so" + "osicat--system.fasl" + "osicat.asd" + "unixint__grovel")))) + (find-files lib ".*"))) + #t)))))) + (inputs + `(("alexandria" ,sbcl-alexandria) + ("cffi" ,sbcl-cffi) + ("trivial-features" ,sbcl-trivial-features))) + (native-inputs + `(("cffi-grovel" ,sbcl-cffi-grovel) + ("rt" ,sbcl-rt))) + (synopsis "Operating system interface for Common Lisp") + (description + "Osicat is a lightweight operating system interface for Common Lisp on +Unix-platforms. It is not a POSIX-style API, but rather a simple lispy +accompaniment to the standard ANSI facilities.") + (license license:expat)))) + +(define-public cl-osicat + (sbcl-package->cl-source-package sbcl-osicat)) -- cgit 1.4.1 From 2d8270ad56e98035a4dd4dfdab77e730d929a001 Mon Sep 17 00:00:00 2001 From: Efraim Flashner Date: Sat, 25 Apr 2020 22:46:34 +0300 Subject: gnu: python-reportlib: Add missing libraries. * gnu/packages/pdf.scm (python-reportlib)[arguments]: Add 'use-system-libart' configure flag. Add custom phase to find libraries. [inputs]: Add libart-lgpl, font-curve-files. --- gnu/packages/pdf.scm | 34 +++++++++++++++++++++++++++++----- 1 file changed, 29 insertions(+), 5 deletions(-) diff --git a/gnu/packages/pdf.scm b/gnu/packages/pdf.scm index a7d7ee1c11..90be195aa0 100644 --- a/gnu/packages/pdf.scm +++ b/gnu/packages/pdf.scm @@ -5,7 +5,7 @@ ;;; Copyright © 2015 Paul van der Walt ;;; Copyright © 2016 Roel Janssen ;;; Copyright © 2016 ng0 -;;; Copyright © 2016, 2017, 2018, 2019 Efraim Flashner +;;; Copyright © 2016, 2017, 2018, 2019, 2020 Efraim Flashner ;;; Copyright © 2016, 2017 Marius Bakke ;;; Copyright © 2016, 2017, 2019 Ludovic Courtès ;;; Copyright © 2016 Julien Lepiller @@ -913,11 +913,35 @@ optimize toolbar for portrait / landscape "0lf8hil9nbm74zl27l8rydxbhwnpr0pbghibsqrc9sglds9l9vw3")))) (build-system python-build-system) (arguments - '(;; FIXME: There is one test failure, but it does not cause the - ;; build to fail. No time to investigate right now. - #:test-target "tests")) + '(;; FIXME: There is one test failure, building the pdf manual from source, + ;; but it does not cause the build to fail. + #:test-target "tests" + #:configure-flags (list "--use-system-libart") + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'find-libraries + (lambda* (#:key inputs #:allow-other-keys) + (let ((libart (assoc-ref inputs "libart-lgpl")) + (freetype (assoc-ref inputs "freetype")) + (dlt1 (assoc-ref inputs "font-curve-files"))) + (substitute* "setup.py" + (("/usr/include/libart-\\*") + (string-append libart "/include/libart-2.0")) + (("/usr/include/freetype2") + (string-append freetype "/include")) + (("http://www.reportlab.com/ftp/pfbfer-20180109.zip") + (string-append "file://" dlt1))) + #t)))))) (inputs - `(("freetype" ,freetype))) + `(("freetype" ,freetype) + ("libart-lgpl" ,libart-lgpl) + ("font-curve-files" + ,(origin + (method url-fetch) + (uri "http://www.reportlab.com/ftp/pfbfer-20180109.zip") + (sha256 + (base32 + "1v0gy4mbx02ys96ssx89420y0njknlrxs2bx64bv4rp8a0al66w5")))))) (propagated-inputs `(("python-pillow" ,python-pillow))) (home-page "https://www.reportlab.com") -- cgit 1.4.1 From e56ab46ba001504d64af37a3fe945fa6ead3492e Mon Sep 17 00:00:00 2001 From: Efraim Flashner Date: Sat, 25 Apr 2020 22:51:37 +0300 Subject: gnu: python-reportlib: Update to 3.5.42. * gnu/packages/pdf.scm (python-reportlib): Update to 3.5.42. --- gnu/packages/pdf.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/pdf.scm b/gnu/packages/pdf.scm index 90be195aa0..71b8177582 100644 --- a/gnu/packages/pdf.scm +++ b/gnu/packages/pdf.scm @@ -904,13 +904,13 @@ optimize toolbar for portrait / landscape (define-public python-reportlab (package (name "python-reportlab") - (version "3.5.32") + (version "3.5.42") (source (origin (method url-fetch) (uri (pypi-uri "reportlab" version)) (sha256 (base32 - "0lf8hil9nbm74zl27l8rydxbhwnpr0pbghibsqrc9sglds9l9vw3")))) + "0i17qgm7gzy7pzp240mkpsx9rn8rr67jh5npp5bylv3sd41g48cw")))) (build-system python-build-system) (arguments '(;; FIXME: There is one test failure, building the pdf manual from source, -- cgit 1.4.1 From e54acdfe162feb98b0e0c0abb7413d3bbe2508f4 Mon Sep 17 00:00:00 2001 From: Florian Pelz Date: Sat, 25 Apr 2020 20:12:17 +0200 Subject: news: Add ‘de’ translation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * etc/news.scm: Add a ‘de’ translation. --- etc/news.scm | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/etc/news.scm b/etc/news.scm index cfe2ee7466..10e01531a3 100644 --- a/etc/news.scm +++ b/etc/news.scm @@ -11,7 +11,8 @@ (version 0) (entry (commit "e1e6491226347d9fb93ff484d78cef98848a510a") - (title (en "Guix Cookbook now available as Info")) + (title (en "Guix Cookbook now available as Info") + (de "Guix-Kochbuch jetzt als Info-Dokument verfügbar")) ;; TRANSLATORS: Adjust the URL and the 'info' command to refer to the ;; translated manual if it's available. (body (en "The new Guix Cookbook is now fetched by @command{guix pull} @@ -27,7 +28,22 @@ The Cookbook is currently available in English and German. You can also find it @uref{https://guix.gnu.org/cookbook/en/, on-line}. Your contributions are welcome: @uref{https://guix.gnu.org/contact/, get in -touch with the developers} to share your recipes!"))) +touch with the developers} to share your recipes!") + (de "Das neue Guix-Kochbuch wird nun von @command{guix pull} +geladen und steht dann im Info-Format zur Verfügung. Darin sollen Anleitungen +und detaillierte Beispiele gezeigt werden, die eine breite Spanne an +Anwendungsfällen abdecken. Um darauf zuzugreifen, geben Sie dies ein: + +@example +info guix-cookbook.de +@end example + +Das Kochbuch steht derzeit auf Deutsch und Englisch zur Verfügung. Sie können +auch @uref{https://guix.gnu.org/cookbook/de/, online} darauf zugreifen. + +Ihre Beiträge werden gerne gesehen. Bitte +@uref{https://guix.gnu.org/contact/, kontaktieren Sie die Entwickler}, um Ihre +Rezepte mit uns zu teilen!"))) (entry (commit "0468455e7d279c89ea3ad1b51935efb2b785ec47") (title (en "Rottlog service added to @code{%base-services}") -- cgit 1.4.1 From ba11dddbfe93d49770cbe40c81a96ead86a69c15 Mon Sep 17 00:00:00 2001 From: Matthew Kraai Date: Sat, 25 Apr 2020 03:51:34 -0700 Subject: gnu: texlive-latex-pdfx: Fix typo. * gnu/packages/tex.scm (texlive-latex-pdfx)[description]: Fix typo. Signed-off-by: Nicolas Goaziou --- gnu/packages/tex.scm | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/gnu/packages/tex.scm b/gnu/packages/tex.scm index 91d3ee6295..d5bcff0371 100644 --- a/gnu/packages/tex.scm +++ b/gnu/packages/tex.scm @@ -7068,7 +7068,7 @@ the file to which it applies.") (home-page "https://www.ctan.org/pkg/pdfx") (synopsis "PDF/X and PDF/A support for pdfTeX, LuaTeX and XeTeX") (description - "This package helps LaTeX users to create PDF/X, PFD/A and other + "This package helps LaTeX users to create PDF/X, PDF/A and other standards-compliant PDF documents with pdfTeX, LuaTeX and XeTeX.") (license license:lppl1.2+))) -- cgit 1.4.1 From 813a88bb5a3dbd9e0c99524e323cd38cb22f2e50 Mon Sep 17 00:00:00 2001 From: TomZ Date: Sat, 25 Apr 2020 12:16:08 +0200 Subject: gnu: flowee: Update to 2020.03.2 * gnu/packages/finance.scm (flowee): Update to 2020.03.2 --- gnu/packages/finance.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/finance.scm b/gnu/packages/finance.scm index 80d0350cf5..c31b87ec19 100644 --- a/gnu/packages/finance.scm +++ b/gnu/packages/finance.scm @@ -1471,14 +1471,14 @@ like Flowee the Hub, which Fulcrum connects to over RPC.") (define-public flowee (package (name "flowee") - (version "2020.03.1") + (version "2020.03.2") (source (origin (method url-fetch) (uri (string-append "https://gitlab.com/FloweeTheHub/thehub/-/archive/" version "/thehub-" version ".tar.gz")) (sha256 - (base32 "1ajd5axv9zyhh6njrvamm11zn52j1q4j3mwn2nfv7cjd4lhnhlsr")))) + (base32 "1m8wfwxljvd2gqpfj1w37xky4isa3h9a7g57cnf3l4r90r4bxj47")))) (build-system cmake-build-system) (arguments `(#:configure-flags '("-Dbuild_tests=ON" "-Denable_gui=OFF") -- cgit 1.4.1 From 731e92f0f858508de338f54b85178daf245959e8 Mon Sep 17 00:00:00 2001 From: Oskar Köök Date: Sat, 25 Apr 2020 13:31:19 +0300 Subject: gnu: elixir: Update to 1.10.3. * gnu/packages/elixir.scm (elixir): Update to 1.10.3. --- gnu/packages/elixir.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/elixir.scm b/gnu/packages/elixir.scm index a52b31f22d..6f744af2f1 100644 --- a/gnu/packages/elixir.scm +++ b/gnu/packages/elixir.scm @@ -33,7 +33,7 @@ (define-public elixir (package (name "elixir") - (version "1.10.2") + (version "1.10.3") (source (origin (method git-fetch) @@ -42,7 +42,7 @@ (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "04yi1hljq7ii9flh6pmb5411z7q1bdq9f9sq8323k9hm1f5jwkx6")) + (base32 "18bqqqzvhr1zj491wc3d36a310mg1wcs12npp70zfmgqrc60q65a")) (patches (search-patches "elixir-path-length.patch")))) (build-system gnu-build-system) (arguments -- cgit 1.4.1 From 82bd276d604785725116976b5388b40d679e5742 Mon Sep 17 00:00:00 2001 From: Holger Peters Date: Fri, 24 Apr 2020 20:38:24 +0200 Subject: gnu: python-pastedeploy: Update to 2.1.0 * gnu/packages/python-web.scm (python-pastedeploy): Update to 2.1.0. [arguments]: Add test-target. [native-inputs]: Replace python-nose with python-pytest and python-pytest-runner. --- gnu/packages/python-web.scm | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/gnu/packages/python-web.scm b/gnu/packages/python-web.scm index 1d99239dbb..9f8bcdc5b5 100644 --- a/gnu/packages/python-web.scm +++ b/gnu/packages/python-web.scm @@ -34,6 +34,7 @@ ;;; Copyright © 2020 Jakub Kądziołka ;;; Copyright © 2020 Evan Straw ;;; Copyright © 2020 Alexandros Theodotou +;;; Copyright © 2020 Holger Peters ;;; ;;; This file is part of GNU Guix. ;;; @@ -1717,17 +1718,19 @@ and to spawn subprocesses to handle requests.") (define-public python-pastedeploy (package (name "python-pastedeploy") - (version "1.5.2") + (version "2.1.0") (source (origin (method url-fetch) (uri (pypi-uri "PasteDeploy" version)) (sha256 - (base32 - "1jz3m4hq8v6hyhfjz9425nd3nvn52cvbfipdcd72krjmla4qz1fm")))) + (base32 "16qsq5y6mryslmbp5pn35x4z8z3ndp5rpgl42h226879nrw9hmg7")))) (build-system python-build-system) + (arguments + '(#:test-target "pytest")) (native-inputs - `(("python-nose" ,python-nose))) + `(("python-pytest" ,python-pytest) + ("python-pytest-runner" ,python-pytest-runner))) (home-page "https://pylonsproject.org/") (synopsis "Load, configure, and compose WSGI applications and servers") -- cgit 1.4.1 From b0ec8c675eef98e49bb0c8ba3a5250e9df3b31c8 Mon Sep 17 00:00:00 2001 From: Holger Peters Date: Fri, 24 Apr 2020 20:35:18 +0200 Subject: gnu: python-webob: Update to 1.8.3 * gnu/packages/python-web.scm (python-webob): Update to 1.8.3. --- gnu/packages/python-web.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/python-web.scm b/gnu/packages/python-web.scm index 9f8bcdc5b5..cc79c38acf 100644 --- a/gnu/packages/python-web.scm +++ b/gnu/packages/python-web.scm @@ -969,14 +969,14 @@ your Web app.") (define-public python-webob (package (name "python-webob") - (version "1.5.1") + (version "1.8.3") (source (origin (method url-fetch) (uri (pypi-uri "WebOb" version)) (sha256 (base32 - "02bhhzijfhv8hmi1i54d4b0v43liwhnywhflvxsv4x3zax9s3afq")))) + "1cpqskanmvwia8wqlpcr3ykyxysynjdnbl5namvpg8vw6jnkv1dh")))) (build-system python-build-system) (native-inputs `(("python-nose" ,python-nose))) -- cgit 1.4.1 From 3a5d1c9b6b539c8f5ac2b44f4751935a230a92bd Mon Sep 17 00:00:00 2001 From: "Boris A. Dekshteyn" Date: Sat, 25 Apr 2020 18:19:26 +1200 Subject: gnu: fontmanager: Update to 0.7.7. * gnu/packages/fontutils.scm (fontmanager): Update to 0.7.7. --- gnu/packages/fontutils.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/fontutils.scm b/gnu/packages/fontutils.scm index 7455d3381a..2dffc0b919 100644 --- a/gnu/packages/fontutils.scm +++ b/gnu/packages/fontutils.scm @@ -727,7 +727,7 @@ maintain the Noto Fonts project.") (define-public fontmanager (package (name "fontmanager") - (version "0.7.5") + (version "0.7.7") (source (origin (method git-fetch) @@ -737,7 +737,7 @@ maintain the Noto Fonts project.") (file-name (git-file-name name version)) (sha256 (base32 - "16hma8rrkam6ngn5vbdaryn31vdixvii6920g9z928gylz9xkd3g")))) + "1bzqvspplp1zj0n0869jqbc60wgbjhf0vdrn5bj8dfawxynh8s5f")))) (build-system meson-build-system) (arguments `(#:glib-or-gtk? #t -- cgit 1.4.1 From 5cca16968ea1ff90df9ecb306636d60162a666f0 Mon Sep 17 00:00:00 2001 From: Raghav Gururajan Date: Fri, 24 Apr 2020 20:07:27 -0400 Subject: gnu: pavucontrol: Fix icons. * gnu/packages/pulseaudio.scm (pavucontrol): Fix icons. [build-system]: Use glib-or-gtk-build-system instead of gnu-build-system. [inputs]: Add adwaita-icon-theme. Re-order inputs. Since the adwaita icon theme is hard-coded in the application, there is no choice for the user anyway. So added adwaita-icon-theme to inputs and changed build-system to glib-or-gtk to fix loading of icons. --- gnu/packages/pulseaudio.scm | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/gnu/packages/pulseaudio.scm b/gnu/packages/pulseaudio.scm index c2853dcd82..a1500392fc 100644 --- a/gnu/packages/pulseaudio.scm +++ b/gnu/packages/pulseaudio.scm @@ -31,6 +31,7 @@ #:use-module (guix download) #:use-module (guix git-download) #:use-module ((guix licenses) #:prefix l:) + #:use-module (guix build-system glib-or-gtk) #:use-module (guix build-system gnu) #:use-module (guix build-system python) #:use-module (gnu packages) @@ -233,10 +234,11 @@ sound server.") (sha256 (base32 "14486c6lmmirkhscbfygz114f6yzf97h35n3h3pdr27w4mdfmlmk")))) - (build-system gnu-build-system) + (build-system glib-or-gtk-build-system) (inputs - `(("libcanberra" ,libcanberra) + `(("adwaita-icon-theme" ,adwaita-icon-theme) ;hard-coded theme ("gtkmm" ,gtkmm) + ("libcanberra" ,libcanberra) ("pulseaudio" ,pulseaudio))) (native-inputs `(("intltool" ,intltool) -- cgit 1.4.1 From 128b136ec6b48ccde03264535b7ae921759d863c Mon Sep 17 00:00:00 2001 From: Nicolas Goaziou Date: Sat, 25 Apr 2020 23:10:16 +0200 Subject: doc: cookbook: Fix quotes. * doc/guix-cookbook.texi (Basic setup with manifests): (Default profile): (The benefits of manifests): Use proper quotes in regular texts. --- doc/guix-cookbook.texi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/doc/guix-cookbook.texi b/doc/guix-cookbook.texi index 3f18c41542..82700a48ad 100644 --- a/doc/guix-cookbook.texi +++ b/doc/guix-cookbook.texi @@ -1791,8 +1791,8 @@ where we will store our profiles in the rest of this article. Placing all your profiles in a single directory, with each profile getting its own sub-directory, is somewhat cleaner. This way, each sub-directory will -contain all the symlinks for precisely one profile. Besides, "looping over -profiles" becomes obvious from any programming language (e.g.@: a shell script) by +contain all the symlinks for precisely one profile. Besides, ``looping over +profiles'' becomes obvious from any programming language (e.g.@: a shell script) by simply looping over the sub-directories of @samp{$GUIX_EXTRA_PROFILES}. Note that it's also possible to loop over the output of @@ -1926,7 +1926,7 @@ What about the default profile that Guix keeps in @file{~/.guix-profile}? You can assign it the role you want. Typically you would install the manifest of the packages you want to use all the time. -Alternatively, you could keep it "manifest-less" for throw-away packages +Alternatively, you could keep it ``manifest-less'' for throw-away packages that you would just use for a couple of days. This way makes it convenient to run @@ -1957,7 +1957,7 @@ Manifests come with multiple benefits. In particular, they ease maintenance: @itemize @item When a profile is set up from a manifest, the manifest itself is -self-sufficient to keep a "package listing" around and reinstall the profile +self-sufficient to keep a ``package listing'' around and reinstall the profile later or on a different system. For ad-hoc profiles, we would need to generate a manifest specification manually and maintain the package versions for the packages that don't use the default version. @@ -1994,7 +1994,7 @@ They can be manipulated in Scheme and passed to the various Guix @uref{https://e It's important to understand that while manifests can be used to declare profiles, they are not strictly equivalent: profiles have the side effect that -they "pin" packages in the store, which prevents them from being +they ``pin'' packages in the store, which prevents them from being garbage-collected (@pxref{Invoking guix gc,,, guix, GNU Guix Reference Manual}) and ensures that they will still be available at any point in the future. -- cgit 1.4.1 From d558de8048f436aaa1b3ce4bcdff592b317a5639 Mon Sep 17 00:00:00 2001 From: Nicolas Goaziou Date: Sat, 25 Apr 2020 23:35:44 +0200 Subject: doc: guix: Fix some markup. * doc/guix.texi (Build Systems): (Base Services): (X Window): (Printing Services): (Mail Services): (Messaging Services): (LDAP Services): (Virtualization Services): (Version Control Services): Use @samp, @code and double quotes where appropriate. --- doc/guix.texi | 127 ++++++++++++++++++++++++++++++---------------------------- 1 file changed, 65 insertions(+), 62 deletions(-) diff --git a/doc/guix.texi b/doc/guix.texi index 19094c4b70..6613a4af13 100644 --- a/doc/guix.texi +++ b/doc/guix.texi @@ -6099,8 +6099,8 @@ implements a build procedure for Android NDK (native development kit) packages using a Guix-specific build process. The build system assumes that packages install their public interface -(header) files to the subdirectory "include" of the "out" output and -their libraries to the subdirectory "lib" of the "out" output. +(header) files to the subdirectory @file{include} of the @code{out} output and +their libraries to the subdirectory @file{lib} the @code{out} output. It's also assumed that the union of all the dependencies of a package has no conflicting files. @@ -6802,8 +6802,8 @@ kernel module. @end table It is possible and useful to specify the Linux kernel to use for building -the module (in the "arguments" form of a package using the -linux-module-build-system, use the key #:linux to specify it). +the module (in the @code{arguments} form of a package using the +@code{linux-module-build-system}, use the key @code{#:linux} to specify it). @end defvr @defvr {Scheme Variable} node-build-system @@ -12427,7 +12427,7 @@ man page for more information. @item @code{tty} The name of the console this agetty runs on, as a string---e.g., -@code{"ttyS0"}. This argument is optional, it will default to +@code{"ttyS0"}. This argument is optional, it will default to a reasonable default serial port used by the kernel Linux. For this, if there is a value for an option @code{agetty.tty} in the kernel @@ -12462,7 +12462,7 @@ in automatically without prompting for their login name or password. When @code{#t}, don't reset terminal cflags (control modes). @item @code{host} (default: @code{#f}) -This accepts a string containing the "login_host", which will be written +This accepts a string containing the ``login_host'', which will be written into the @file{/var/run/utmpx} file. @item @code{remote?} (default: @code{#f}) @@ -12568,8 +12568,8 @@ This option accepts a string of additional characters that should be interpreted as backspace when the user types their login name. @item @code{kill-characters} (default: @code{#f}) -This option accepts a string that should be interpreted to mean "ignore -all previous characters" (also called a "kill" character) when the user +This option accepts a string that should be interpreted to mean ``ignore +all previous characters'' (also called a ``kill'' character) when the user types their login name. @item @code{chdir} (default: @code{#f}) @@ -12585,7 +12585,7 @@ This option accepts, as an integer, the nice value with which to run the @command{login} program. @item @code{extra-options} (default: @code{'()}) -This option provides an "escape hatch" for the user to provide arbitrary +This option provides an ``escape hatch'' for the user to provide arbitrary command-line arguments to @command{agetty} as a list of strings. @end table @@ -14691,15 +14691,15 @@ The default SLiM theme and its name. @deftp {Data Type} sddm-configuration -This is the data type representing the sddm service configuration. +This is the data type representing the SDDM service configuration. @table @asis @item @code{display-server} (default: "x11") -Select display server to use for the greeter. Valid values are "x11" -or "wayland". +Select display server to use for the greeter. Valid values are +@samp{"x11"} or @samp{"wayland"}. @item @code{numlock} (default: "on") -Valid values are "on", "off" or "none". +Valid values are @samp{"on"}, @samp{"off"} or @samp{"none"}. @item @code{halt-command} (default @code{#~(string-apppend #$shepherd "/sbin/halt")}) Command to run when halting. @@ -14708,7 +14708,8 @@ Command to run when halting. Command to run when rebooting. @item @code{theme} (default "maldives") -Theme to use. Default themes provided by SDDM are "elarun", "maldives" or "maya". +Theme to use. Default themes provided by SDDM are @samp{"elarun"}, +@samp{"maldives"} or @samp{"maya"}. @item @code{themes-directory} (default "/run/current-system/profile/share/sddm/themes") Directory to look for themes. @@ -15196,9 +15197,9 @@ Defaults to @samp{#f}. @deftypevr {@code{cups-configuration} parameter} string classification Specifies the security classification of the server. Any valid banner -name can be used, including "classified", "confidential", "secret", -"topsecret", and "unclassified", or the banner can be omitted to disable -secure printing functions. +name can be used, including @samp{"classified"}, @samp{"confidential"}, +@samp{"secret"}, @samp{"topsecret"}, and @samp{"unclassified"}, or the +banner can be omitted to disable secure printing functions. Defaults to @samp{""}. @end deftypevr @@ -15400,7 +15401,7 @@ Defaults to @samp{()}. @deftypevr {@code{method-access-controls} parameter} access-control-list access-controls Access control directives, as a list of strings. Each string should be -one directive, such as "Order allow,deny". +one directive, such as @samp{"Order allow,deny"}. Defaults to @samp{()}. @end deftypevr @@ -15481,7 +15482,7 @@ Defaults to @samp{0}. @deftypevr {@code{cups-configuration} parameter} non-negative-integer max-job-time Specifies the maximum time a job may take to print before it is -canceled, in seconds. Set to 0 to disable cancellation of "stuck" jobs. +canceled, in seconds. Set to 0 to disable cancellation of ``stuck'' jobs. Defaults to @samp{10800}. @end deftypevr @@ -17216,12 +17217,12 @@ if the user doesn't yet have any mail, so you should explicitly tell Dovecot the full location. If you're using mbox, giving a path to the INBOX -file (e.g.@: /var/mail/%u) isn't enough. You'll also need to tell Dovecot -where the other mailboxes are kept. This is called the "root mail -directory", and it must be the first path given in the +file (e.g.@: @file{/var/mail/%u}) isn't enough. You'll also need to tell Dovecot +where the other mailboxes are kept. This is called the @emph{root mail +directory}, and it must be the first path given in the @samp{mail-location} setting. -There are a few special variables you can use, eg.: +There are a few special variables you can use, e.g.: @table @samp @item %u @@ -17258,31 +17259,31 @@ Defaults to @samp{""}. @deftypevr {@code{dovecot-configuration} parameter} string mail-privileged-group Group to enable temporarily for privileged operations. Currently this is used only with INBOX when either its initial creation or -dotlocking fails. Typically this is set to "mail" to give access to -/var/mail. +dotlocking fails. Typically this is set to @samp{"mail"} to give access to +@file{/var/mail}. Defaults to @samp{""}. @end deftypevr @deftypevr {@code{dovecot-configuration} parameter} string mail-access-groups Grant access to these supplementary groups for mail processes. Typically these are used to set up access to shared mailboxes. Note -that it may be dangerous to set these if users can create -symlinks (e.g.@: if "mail" group is set here, ln -s /var/mail ~/mail/var -could allow a user to delete others' mailboxes, or ln -s -/secret/shared/box ~/mail/mybox would allow reading it). -Defaults to @samp{""}. +that it may be dangerous to set these if users can create symlinks +(e.g.@: if @samp{mail} group is set here, @code{ln -s /var/mail ~/mail/var} +could allow a user to delete others' mailboxes, or @code{ln -s +/secret/shared/box ~/mail/mybox} would allow reading it). Defaults to +@samp{""}. @end deftypevr @deftypevr {@code{dovecot-configuration} parameter} boolean mail-full-filesystem-access? Allow full file system access to clients. There's no access checks other than what the operating system does for the active UID/GID. It works with both maildir and mboxes, allowing you to prefix mailboxes -names with e.g.@: /path/ or ~user/. +names with e.g.@: @file{/path/} or @file{~user/}. Defaults to @samp{#f}. @end deftypevr @deftypevr {@code{dovecot-configuration} parameter} boolean mmap-disable? -Don't use mmap() at all. This is required if you store indexes to +Don't use @code{mmap()} at all. This is required if you store indexes to shared file systems (NFS or clustered file system). Defaults to @samp{#f}. @end deftypevr @@ -17300,7 +17301,7 @@ When to use fsync() or fdatasync() calls: @item optimized Whenever necessary to avoid losing important data @item always -Useful with e.g.@: NFS when write()s are delayed +Useful with e.g.@: NFS when @code{write()}s are delayed @item never Never use it (best performance, but crashes can lose data). @end table @@ -17367,10 +17368,10 @@ Defaults to @samp{50}. @deftypevr {@code{dovecot-configuration} parameter} colon-separated-file-name-list valid-chroot-dirs List of directories under which chrooting is allowed for mail -processes (i.e.@: /var/mail will allow chrooting to /var/mail/foo/bar +processes (i.e.@: @file{/var/mail} will allow chrooting to @file{/var/mail/foo/bar} too). This setting doesn't affect @samp{login-chroot} @samp{mail-chroot} or auth chroot settings. If this setting is empty, -"/./" in home dirs are ignored. WARNING: Never add directories here +@samp{/./} in home dirs are ignored. WARNING: Never add directories here which local users can modify, that may lead to root exploit. Usually this should be done only if you don't allow shell access for users. . @@ -17379,11 +17380,11 @@ Defaults to @samp{()}. @deftypevr {@code{dovecot-configuration} parameter} string mail-chroot Default chroot directory for mail processes. This can be overridden -for specific users in user database by giving /./ in user's home -directory (e.g.@: /home/./user chroots into /home). Note that usually +for specific users in user database by giving @samp{/./} in user's home +directory (e.g.@: @samp{/home/./user} chroots into @file{/home}). Note that usually there is no real need to do chrooting, Dovecot doesn't allow users to access files outside their mail directory anyway. If your home -directories are prefixed with the chroot directory, append "/."@: to +directories are prefixed with the chroot directory, append @samp{/.} to @samp{mail-chroot}. . Defaults to @samp{""}. @end deftypevr @@ -18490,7 +18491,7 @@ Curve for Elliptic curve Diffie-Hellman. Prosody's default is @end deftypevr @deftypevr {@code{ssl-configuration} parameter} maybe-string-list verifyext -A list of "extra" verification options. +A list of ``extra'' verification options. @end deftypevr @deftypevr {@code{ssl-configuration} parameter} maybe-string password @@ -18578,7 +18579,7 @@ example if you want your users to have addresses like @samp{"john.smith@@example.com"} then you need to add a host @samp{"example.com"}. All options in this list will apply only to this host. -Note: the name "virtual" host is used in configuration to avoid confusion with +Note: the name @emph{virtual} host is used in configuration to avoid confusion with the actual physical host that Prosody is installed on. A single Prosody instance can serve many domains, each one defined as a VirtualHost entry in Prosody's configuration. Conversely a server that hosts a single domain would @@ -18624,7 +18625,7 @@ Multi-user chat (MUC) is Prosody's module for allowing you to create hosted chatrooms/conferences for XMPP users. General information on setting up and using multi-user chatrooms can be found -in the "Chatrooms" documentation (@url{https://prosody.im/doc/chatrooms}), +in the ``Chatrooms'' documentation (@url{https://prosody.im/doc/chatrooms}), which you should read if you are new to XMPP chatrooms. See also @url{https://prosody.im/doc/modules/mod_muc}. @@ -19699,11 +19700,12 @@ Defaults to @samp{"nslcd"}. @deftypevr {@code{nslcd-configuration} parameter} log-option log This option controls the way logging is done via a list containing -SCHEME and LEVEL. The SCHEME argument may either be the symbols "none" -or "syslog", or an absolute file name. The LEVEL argument is optional -and specifies the log level. The log level may be one of the following -symbols: "crit", "error", "warning", "notice", "info" or "debug". All -messages with the specified log level or higher are logged. +SCHEME and LEVEL. The SCHEME argument may either be the symbols +@samp{none} or @samp{syslog}, or an absolute file name. The LEVEL +argument is optional and specifies the log level. The log level may be +one of the following symbols: @samp{crit}, @samp{error}, @samp{warning}, +@samp{notice}, @samp{info} or @samp{debug}. All messages with the +specified log level or higher are logged. Defaults to @samp{("/var/log/nslcd" info)}. @@ -23585,7 +23587,7 @@ Defaults to @samp{()}. @deftypevr {@code{libvirt-configuration} parameter} string tls-priority Override the compile time default TLS priority string. The default is -usually "NORMAL" unless overridden at build time. Only set this is it +usually @samp{"NORMAL"} unless overridden at build time. Only set this is it is desired for libvirt to deviate from the global default settings. Defaults to @samp{"NORMAL"}. @@ -23719,11 +23721,12 @@ x:+name where @code{name} is a string which is matched against the category given in the @code{VIR_LOG_INIT()} at the top of each libvirt source -file, e.g., "remote", "qemu", or "util.json" (the name in the filter can -be a substring of the full category name, in order to match multiple -similar categories), the optional "+" prefix tells libvirt to log stack -trace for each message matching name, and @code{x} is the minimal level -where matching messages should be logged: +file, e.g., @samp{"remote"}, @samp{"qemu"}, or @samp{"util.json"} (the +name in the filter can be a substring of the full category name, in +order to match multiple similar categories), the optional @samp{"+"} +prefix tells libvirt to log stack trace for each message matching name, +and @code{x} is the minimal level where matching messages should be +logged: @itemize @bullet @item @@ -24141,7 +24144,7 @@ expose repositories over the Git protocol for anonymous access. The optional @var{config} argument should be a @code{} object, by default it allows read-only access to exported@footnote{By creating the magic file -"git-daemon-export-ok" in the repository directory.} repositories under +@file{git-daemon-export-ok} in the repository directory.} repositories under @file{/srv/git}. @end deffn @@ -24808,7 +24811,7 @@ Defaults to @samp{"a fast webinterface for the git dscm"}. @deftypevr {@code{cgit-configuration} parameter} string root-readme The content of the file specified with this option will be included -verbatim below the "about" link on the repository index page. +verbatim below the ``about'' link on the repository index page. Defaults to @samp{""}. @@ -24825,8 +24828,8 @@ Defaults to @samp{""}. If set to @samp{#t} and repository-directory is enabled, repository-directory will recurse into directories whose name starts with a period. Otherwise, repository-directory will stay away from such -directories, considered as "hidden". Note that this does not apply to -the ".git" directory in non-bare repos. +directories, considered as ``hidden''. Note that this does not apply to +the @file{.git} directory in non-bare repos. Defaults to @samp{#f}. @@ -24889,7 +24892,7 @@ Defaults to @samp{""}. @end deftypevr @deftypevr {@code{cgit-configuration} parameter} integer summary-branches -Specifies the number of branches to display in the repository "summary" +Specifies the number of branches to display in the repository ``summary'' view. Defaults to @samp{10}. @@ -24898,14 +24901,14 @@ Defaults to @samp{10}. @deftypevr {@code{cgit-configuration} parameter} integer summary-log Specifies the number of log entries to display in the repository -"summary" view. +``summary'' view. Defaults to @samp{10}. @end deftypevr @deftypevr {@code{cgit-configuration} parameter} integer summary-tags -Specifies the number of tags to display in the repository "summary" +Specifies the number of tags to display in the repository ``summary'' view. Defaults to @samp{10}. @@ -24997,7 +25000,7 @@ Defaults to @samp{""}. @deftypevr {@code{repository-cgit-configuration} parameter} repo-string defbranch The name of the default branch for this repository. If no such branch exists in the repository, the first branch name (when sorted) is used as -default instead. By default branch pointed to by HEAD, or "master" if +default instead. By default branch pointed to by HEAD, or ``master'' if there is no suitable HEAD. Defaults to @samp{""}. @@ -25158,7 +25161,7 @@ Defaults to @samp{""}. @deftypevr {@code{repository-cgit-configuration} parameter} repo-string readme A path (relative to repo) which specifies a file to include verbatim as -the "About" page for this repo. +the ``About'' page for this repo. Defaults to @samp{""}. @@ -25297,7 +25300,7 @@ A value like @code{#o0027} will give read access to the group used by Gitolite like cgit or gitweb. @item @code{git-config-keys} (default: @code{""}) -Gitolite allows you to set git config values using the "config" keyword. This +Gitolite allows you to set git config values using the @samp{config} keyword. This setting allows control over the config keys to accept. @item @code{roles} (default: @code{'(("READERS" . 1) ("WRITERS" . ))}) -- cgit 1.4.1 From 396eb9e1a968f4b210e0d00154a7d633da91307c Mon Sep 17 00:00:00 2001 From: Oleg Pykhalov Date: Sat, 25 Apr 2020 22:27:33 +0300 Subject: gnu: Add sbcl-stumpwm-globalwindows. * gnu/packages/wm.scm (sbcl-stumpwm-globalwindows): New variable. --- gnu/packages/wm.scm | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/gnu/packages/wm.scm b/gnu/packages/wm.scm index 82f11d13fa..a2c992d2c6 100644 --- a/gnu/packages/wm.scm +++ b/gnu/packages/wm.scm @@ -1732,6 +1732,36 @@ productive, customizable lisp based systems.") rendering.") (license (list license:gpl2+ license:gpl3+ license:bsd-2))))) +(define-public sbcl-stumpwm-globalwindows + (let ((commit "dd5b037923ec7d3cc27c55806bcec5a1b8cf4e91") + (revision "1")) + (package + (name "sbcl-globalwindows") + (version (git-version "0.0.1" revision commit)) ;no upstream release + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/stumpwm/stumpwm-contrib.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "0ahxdj9f884afpzxczx6mx7l4nwg4kw6afqaq7lwhf7lxcwylldn")))) + (inputs + `(("stumpwm" ,stumpwm "lib"))) + (build-system asdf-build-system/sbcl) + (arguments + '(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'chdir + (lambda _ + (chdir "util/globalwindows")))))) + (home-page "https://github.com/stumpwm/stumpwm-contrib") + (synopsis "Manipulate all windows in the current X session") + (description "This package provides a StumpWM module to manipulate all +windows in the current X session.") + (license (list license:gpl2+ license:gpl3+ license:bsd-2))))) + (define-public lemonbar (let ((commit "35183ab81d2128dbb7b6d8e119cc57846bcefdb4") (revision "1")) -- cgit 1.4.1 From 9b7e41f2d720b2a5da0d52dea6e2017d2851a640 Mon Sep 17 00:00:00 2001 From: Vagrant Cascadian Date: Sat, 25 Apr 2020 15:56:35 -0700 Subject: gnu: arm-trusted-firmware: Update to 2.3. * gnu/packages/firmware (make-arm-trusted-firmware): Update to 2.3. [source]: Remove hdcp patch. * gnu/packages/patches/arm-trusted-firmware-disable-hdcp.patch: Remove patch. * gnu/local.mk: Update accordingly. --- gnu/local.mk | 1 - gnu/packages/firmware.scm | 6 +- .../arm-trusted-firmware-disable-hdcp.patch | 82 ---------------------- 3 files changed, 2 insertions(+), 87 deletions(-) delete mode 100644 gnu/packages/patches/arm-trusted-firmware-disable-hdcp.patch diff --git a/gnu/local.mk b/gnu/local.mk index 66a9c76865..9f212434a9 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -738,7 +738,6 @@ dist_patch_DATA = \ %D%/packages/patches/antlr3-3_1-fix-java8-compilation.patch \ %D%/packages/patches/antlr3-3_3-fix-java8-compilation.patch \ %D%/packages/patches/apr-skip-getservbyname-test.patch \ - %D%/packages/patches/arm-trusted-firmware-disable-hdcp.patch \ %D%/packages/patches/aspell-default-dict-dir.patch \ %D%/packages/patches/aspell-gcc-compat.patch \ %D%/packages/patches/ath9k-htc-firmware-binutils.patch \ diff --git a/gnu/packages/firmware.scm b/gnu/packages/firmware.scm index a7a08f3c01..b35f55ae97 100644 --- a/gnu/packages/firmware.scm +++ b/gnu/packages/firmware.scm @@ -445,7 +445,7 @@ Virtual Machines. OVMF contains a sample UEFI firmware for QEMU and KVM.") (define* (make-arm-trusted-firmware platform #:optional (arch "aarch64")) (package (name (string-append "arm-trusted-firmware-" platform)) - (version "2.2") + (version "2.3") (source (origin (method git-fetch) @@ -454,11 +454,9 @@ Virtual Machines. OVMF contains a sample UEFI firmware for QEMU and KVM.") (url "https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/") (commit (string-append "v" version)))) (file-name (git-file-name "arm-trusted-firmware" version)) - (patches (search-patches - "arm-trusted-firmware-disable-hdcp.patch")) (sha256 (base32 - "03fjl5hy1bqlya6fg553bqz7jrvilzrzpbs87cv6jd04v8qrvry8")))) + "113mcf1hwwl0i90cqh08lywxs1bfbg0nwqibay9wlkmx1a5v0bnj")))) (build-system gnu-build-system) (arguments `(#:phases diff --git a/gnu/packages/patches/arm-trusted-firmware-disable-hdcp.patch b/gnu/packages/patches/arm-trusted-firmware-disable-hdcp.patch deleted file mode 100644 index edae2352d9..0000000000 --- a/gnu/packages/patches/arm-trusted-firmware-disable-hdcp.patch +++ /dev/null @@ -1,82 +0,0 @@ -From c7f0cd054578152a250f784bf82c8ca53aa91a02 Mon Sep 17 00:00:00 2001 -From: Ziyuan Xu -Date: Tue, 8 Oct 2019 10:27:05 +0800 -Subject: [PATCH] plat/rockchip: cliam a macro to enable hdcp feature for DP - -HDCP is using a binary driver, add macro PLAT_RK_DP_HDCP to make it as -an option. - -Change-Id: I54ef1a3635a28e8ae56654bd1e91dfe011520a7f -Signed-off-by: Ziyuan Xu -Signed-off-by: Kever Yang ---- - plat/rockchip/rk3399/plat_sip_calls.c | 4 ++++ - plat/rockchip/rk3399/platform.mk | 11 +++++++---- - 2 files changed, 11 insertions(+), 4 deletions(-) - -diff --git a/plat/rockchip/rk3399/plat_sip_calls.c b/plat/rockchip/rk3399/plat_sip_calls.c -index c2cc5b11c..ce8476c9a 100644 ---- a/plat/rockchip/rk3399/plat_sip_calls.c -+++ b/plat/rockchip/rk3399/plat_sip_calls.c -@@ -56,17 +56,21 @@ uintptr_t rockchip_plat_sip_handler(uint32_t smc_fid, - void *handle, - u_register_t flags) - { -+#ifdef PLAT_RK_DP_HDCP - uint64_t x5, x6; -+#endif - - switch (smc_fid) { - case RK_SIP_DDR_CFG: - SMC_RET1(handle, ddr_smc_handler(x1, x2, x3, x4)); -+#ifdef PLAT_RK_DP_HDCP - case RK_SIP_HDCP_CONTROL: - SMC_RET1(handle, dp_hdcp_ctrl(x1)); - case RK_SIP_HDCP_KEY_DATA64: - x5 = read_ctx_reg(get_gpregs_ctx(handle), CTX_GPREG_X5); - x6 = read_ctx_reg(get_gpregs_ctx(handle), CTX_GPREG_X6); - SMC_RET1(handle, dp_hdcp_store_key(x1, x2, x3, x4, x5, x6)); -+#endif - default: - ERROR("%s: unhandled SMC (0x%x)\n", __func__, smc_fid); - SMC_RET1(handle, SMC_UNK); -diff --git a/plat/rockchip/rk3399/platform.mk b/plat/rockchip/rk3399/platform.mk -index 25c498da8..01577492d 100644 ---- a/plat/rockchip/rk3399/platform.mk -+++ b/plat/rockchip/rk3399/platform.mk -@@ -57,7 +57,6 @@ BL31_SOURCES += ${RK_GIC_SOURCES} \ - ${RK_PLAT_COMMON}/aarch64/platform_common.c \ - ${RK_PLAT_COMMON}/rockchip_sip_svc.c \ - ${RK_PLAT_SOC}/plat_sip_calls.c \ -- ${RK_PLAT_SOC}/drivers/dp/cdn_dp.c \ - ${RK_PLAT_SOC}/drivers/gpio/rk3399_gpio.c \ - ${RK_PLAT_SOC}/drivers/pmu/pmu.c \ - ${RK_PLAT_SOC}/drivers/pmu/pmu_fw.c \ -@@ -89,17 +88,21 @@ $(eval $(call add_define,RK3399M0FW)) - RK3399M0PMUFW=${BUILD_M0}/${PLAT_M0}pmu.bin - $(eval $(call add_define,RK3399M0PMUFW)) - -+ifdef PLAT_RK_DP_HDCP -+BL31_SOURCES += ${RK_PLAT_SOC}/drivers/dp/cdn_dp.c -+ - HDCPFW=${RK_PLAT_SOC}/drivers/dp/hdcp.bin - $(eval $(call add_define,HDCPFW)) - -+${BUILD_PLAT}/bl31/cdn_dp.o: CCACHE_EXTRAFILES=$(HDCPFW) -+${RK_PLAT_SOC}/drivers/dp/cdn_dp.c: $(HDCPFW) -+endif -+ - # CCACHE_EXTRAFILES is needed because ccache doesn't handle .incbin - export CCACHE_EXTRAFILES - ${BUILD_PLAT}/bl31/pmu_fw.o: CCACHE_EXTRAFILES=$(RK3399M0FW):$(RK3399M0PMUFW) - ${RK_PLAT_SOC}/drivers/pmu/pmu_fw.c: $(RK3399M0FW) - --${BUILD_PLAT}/bl31/cdn_dp.o: CCACHE_EXTRAFILES=$(HDCPFW) --${RK_PLAT_SOC}/drivers/dp/cdn_dp.c: $(HDCPFW) -- - $(eval $(call MAKE_PREREQ_DIR,${BUILD_M0},${BUILD_PLAT})) - .PHONY: $(RK3399M0FW) - $(RK3399M0FW): | ${BUILD_M0} --- -2.20.1 - -- cgit 1.4.1 From a17e5092bca815bf928ccf00a06352bfe654a9b8 Mon Sep 17 00:00:00 2001 From: Leo Famulari Date: Sat, 25 Apr 2020 22:26:33 -0400 Subject: gnu: svt-av1: Update to 0.8.2. * gnu/packages/video.scm (svt-av1): Update to 0.8.2. --- gnu/packages/video.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/video.scm b/gnu/packages/video.scm index 8d64cbade7..84b051832a 100644 --- a/gnu/packages/video.scm +++ b/gnu/packages/video.scm @@ -3888,7 +3888,7 @@ transcode or reformat the videos in any way, producing perfect backups.") (define-public svt-av1 (package (name "svt-av1") - (version "0.8.1") + (version "0.8.2") (source (origin (method git-fetch) (uri (git-reference @@ -3897,7 +3897,7 @@ transcode or reformat the videos in any way, producing perfect backups.") (file-name (git-file-name name version)) (sha256 (base32 - "08sx9zhhks8wzq05f67jqmc1zqmmi7hqkgg2gyjpcsan5qc5476w")))) + "0273fxgf4r832y9s0p8hqdj1j1nj8nlz4hylya0b4nsif89yfrhp")))) (build-system cmake-build-system) ;; SVT-AV1 only supports Intel-compatible CPUs. (supported-systems '("x86_64-linux" "i686-linux")) -- cgit 1.4.1 From 186f99f0f7243486dd66558270c17c84183251d1 Mon Sep 17 00:00:00 2001 From: Efraim Flashner Date: Sun, 26 Apr 2020 10:22:14 +0300 Subject: gnu: perl-glib: Update to 1.3292. * gnu/packages/glib.scm (perl-glib): Update to 1.3292. --- gnu/packages/glib.scm | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/gnu/packages/glib.scm b/gnu/packages/glib.scm index c98d8c18f5..47410e0d8d 100644 --- a/gnu/packages/glib.scm +++ b/gnu/packages/glib.scm @@ -3,7 +3,7 @@ ;;; Copyright © 2013, 2015 Andreas Enge ;;; Copyright © 2013 Nikita Karetnikov ;;; Copyright © 2014, 2015, 2016, 2017, 2018 Mark H Weaver -;;; Copyright © 2016 Efraim Flashner +;;; Copyright © 2016, 2020 Efraim Flashner ;;; Copyright © 2016 Lukas Gradl ;;; Copyright © 2017, 2018, 2019 Ricardo Wurmus ;;; Copyright © 2017 Petter @@ -770,7 +770,7 @@ useful for C++.") (define-public perl-glib (package (name "perl-glib") - (version "1.3291") + (version "1.3292") (source (origin (method url-fetch) (uri (string-append @@ -778,7 +778,7 @@ useful for C++.") version ".tar.gz")) (sha256 (base32 - "0whz5f87wvzq8zsva85h06mkfqim2ciq845ixlvmafwxggccv0xr")))) + "1q5075d6v2g5sm675hyzrcpxsrh09z83crfci8b0wl3jwmnz0frg")))) (build-system perl-build-system) (native-inputs `(("perl-extutils-depends" ,perl-extutils-depends) -- cgit 1.4.1 From 796b387bc28c2ca5d116fced9247eb832e168d16 Mon Sep 17 00:00:00 2001 From: Marius Bakke Date: Sat, 25 Apr 2020 02:38:30 +0200 Subject: vm: Remove unused import. * gnu/system/vm.scm: Do not import (gnu packages make-bootstrap). --- gnu/system/vm.scm | 2 -- 1 file changed, 2 deletions(-) diff --git a/gnu/system/vm.scm b/gnu/system/vm.scm index 04d84b5220..6f81ac16ff 100644 --- a/gnu/system/vm.scm +++ b/gnu/system/vm.scm @@ -50,8 +50,6 @@ #:use-module (gnu packages disk) #:use-module (gnu packages zile) #:use-module (gnu packages linux) - #:use-module ((gnu packages make-bootstrap) - #:select (%guile-static-stripped)) #:use-module (gnu packages admin) #:use-module (gnu bootloader) -- cgit 1.4.1 From 018114baa75c1986a1a971f5e48e6b722c7741ba Mon Sep 17 00:00:00 2001 From: Arun Isaac Date: Sat, 25 Apr 2020 15:53:52 +0530 Subject: gnu: maradns: Fix cross compilation. * gnu/packages/dns.scm (maradns)[arguments]: Build make_32bit_tables for the host. --- gnu/packages/dns.scm | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/gnu/packages/dns.scm b/gnu/packages/dns.scm index 80ed1f0b49..86569b5493 100644 --- a/gnu/packages/dns.scm +++ b/gnu/packages/dns.scm @@ -43,6 +43,7 @@ #:use-module (gnu packages crypto) #:use-module (gnu packages datastructures) #:use-module (gnu packages flex) + #:use-module (gnu packages gcc) #:use-module (gnu packages glib) #:use-module (gnu packages groff) #:use-module (gnu packages groff) @@ -979,7 +980,15 @@ known public suffixes.") #:phases (modify-phases %standard-phases (replace 'configure - (lambda _ + (lambda* (#:key native-inputs target #:allow-other-keys) + ;; make_32bit_tables generates a header file that is used during + ;; compilation. Hence, during cross compilation, it should be + ;; built for the host system. + (when target + (substitute* "rng/Makefile" + (("\\$\\(CC\\) -o make_32bit_tables") + (string-append (assoc-ref native-inputs "gcc") + "/bin/gcc -o make_32bit_tables")))) (invoke "./configure"))) (add-before 'install 'create-install-directories (lambda* (#:key outputs #:allow-other-keys) -- cgit 1.4.1 From bb85018ceb9bd1b75c7ccb4d5de959e879a2b113 Mon Sep 17 00:00:00 2001 From: Evan Straw Date: Thu, 23 Apr 2020 12:20:14 -0700 Subject: gnu: hugin: Update to 2019.2.0. * gnu/packages/photo.scm (hugin): Update to 2019.2.0. Signed-off-by: Mathieu Othacehe --- gnu/packages/photo.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/photo.scm b/gnu/packages/photo.scm index 9f24b52906..1e9fab6ef3 100644 --- a/gnu/packages/photo.scm +++ b/gnu/packages/photo.scm @@ -525,7 +525,7 @@ and enhance them.") (define-public hugin (package (name "hugin") - (version "2019.0.0") + (version "2019.2.0") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/hugin/hugin/hugin-" @@ -533,7 +533,7 @@ and enhance them.") "/hugin-" version ".tar.bz2")) (sha256 (base32 - "1l925qslp98gg7yzmgps10h6dq0nb60wbfk345anlxsv0g2ifizr")))) + "0gjsm5bgz10wbr5q3y74f8dzb238dh32xx0p5wa3yca6lbzbv9lb")))) (build-system cmake-build-system) (native-inputs `(("gettext" ,gettext-minimal) -- cgit 1.4.1 From 0bf66cbb72937f1bc084a1b84d85864761056f40 Mon Sep 17 00:00:00 2001 From: Giacomo Leidi Date: Fri, 24 Apr 2020 00:47:44 +0200 Subject: gnu: Add python-osc. * gnu/packages/python-xyz.scm (python-osc): New variable. Signed-off-by: Mathieu Othacehe --- gnu/packages/python-xyz.scm | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/gnu/packages/python-xyz.scm b/gnu/packages/python-xyz.scm index 1a7bbcc299..9460a59e31 100644 --- a/gnu/packages/python-xyz.scm +++ b/gnu/packages/python-xyz.scm @@ -63,7 +63,7 @@ ;;; Copyright © 2019, 2020 Alex Griffin ;;; Copyright © 2019 Pierre Langlois ;;; Copyright © 2019 Jacob MacDonald -;;; Copyright © 2019 Giacomo Leidi +;;; Copyright © 2019, 2020 Giacomo Leidi ;;; Copyright © 2019 Wiktor Żelazny ;;; Copyright © 2019, 2020 Tanguy Le Carrour ;;; Copyright © 2019 Mădălin Ionel Patrașcu @@ -19544,3 +19544,23 @@ a set of pluggable tools to help the programmer in various ways. Some example tools are source structure, project manager, interactive help, workspace...") (license license:bsd-2))) + +(define-public python-osc + (package + (name "python-osc") + (version "1.7.4") + (source + (origin + (method url-fetch) + (uri (pypi-uri "python-osc" version)) + (sha256 + (base32 + "0cnh0z5lnng7fh48nmfaqqn8j25k13gkd4rhxd3m6sjqiix9s3vn")))) + (build-system python-build-system) + (home-page "https://github.com/attwad/python-osc") + (synopsis "Open Sound Control server and client implementations") + (description + "@code{python-osc} is a pure Python library with no external +dependencies. It implements the @uref{http://opensoundcontrol.org/spec-1_0, +Open Sound Control 1.0} specification.") + (license license:unlicense))) -- cgit 1.4.1 From 0745e28d66811d716d7d94d37f6663f68f751984 Mon Sep 17 00:00:00 2001 From: Raghav Gururajan Date: Sun, 26 Apr 2020 05:50:47 -0400 Subject: gnu: Add xarchiver. * gnu/packages/compression (xarchiver): New variable. Signed-off-by: Mathieu Othacehe --- gnu/packages/compression.scm | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/gnu/packages/compression.scm b/gnu/packages/compression.scm index e9ef302bcd..33801d201d 100644 --- a/gnu/packages/compression.scm +++ b/gnu/packages/compression.scm @@ -50,6 +50,7 @@ #:use-module (guix download) #:use-module (guix git-download) #:use-module (guix build-system cmake) + #:use-module (guix build-system glib-or-gtk) #:use-module (guix build-system gnu) #:use-module (guix build-system python) #:use-module (guix build-system trivial) @@ -63,6 +64,10 @@ #:use-module (gnu packages curl) #:use-module (gnu packages documentation) #:use-module (gnu packages file) + #:use-module (gnu packages gettext) + #:use-module (gnu packages glib) + #:use-module (gnu packages gnome) + #:use-module (gnu packages gtk) #:use-module (gnu packages maths) #:use-module (gnu packages perl) #:use-module (gnu packages pkg-config) @@ -70,6 +75,7 @@ #:use-module (gnu packages qt) #:use-module (gnu packages tls) #:use-module (gnu packages valgrind) + #:use-module (gnu packages xml) #:use-module (ice-9 match) #:use-module ((srfi srfi-1) #:select (last))) @@ -2094,3 +2100,34 @@ programs that used to be the de facto UNIX standard for compressing and uncompressing files. These programs implement a fast, simple Lempel-Ziv (LZW) file compression algorithm.") (license license:gpl2+))) + +(define-public xarchiver + (package + (name "xarchiver") + (version "0.5.4.14") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/ib/xarchiver.git") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1iklwgykgymrwcc5p1cdbh91v0ih1m58s3w9ndl5kyd44bwlb7px")))) + (build-system glib-or-gtk-build-system) + (native-inputs + `(("gettext" ,gettext-minimal) + ("intltool" ,intltool) + ("libxslt" ,libxslt) + ("pkg-config" ,pkg-config))) + (inputs + `(("adwaita-icon-theme" ,adwaita-icon-theme) ; Hard-coded theme + ("gtk+" ,gtk+))) + (home-page "https://github.com/ib/xarchiver") + (synopsis "Graphical front-end for archive operations") + (description "Xarchiver is a front-end to various command line archiving +tools. It uses GTK+ tool-kit and is designed to be desktop-environment +independent. Supported formats are 7z, ARJ, bzip2, gzip, LHA, lzma, lzop, +RAR, RPM, DEB, tar, and ZIP. It cannot perform functions for archives, whose +archiver is not installed.") + (license license:gpl2+))) -- cgit 1.4.1 From 660611e5f6e5010339a7c72ef264cdb1f43a8f55 Mon Sep 17 00:00:00 2001 From: Eric Brown Date: Sun, 19 Apr 2020 14:54:51 -0500 Subject: gnu: Add sylpheed. * gnu/packages/mail.scm (sylpheed): New variable. Signed-off-by: Mathieu Othacehe --- gnu/packages/mail.scm | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/gnu/packages/mail.scm b/gnu/packages/mail.scm index b6c566f8cb..cb5e23bcea 100644 --- a/gnu/packages/mail.scm +++ b/gnu/packages/mail.scm @@ -31,6 +31,7 @@ ;;; Copyright © 2019 Tanguy Le Carrour ;;; Copyright © 2020 Vincent Legoll ;;; Copyright © 2020 Justus Winter +;;; Copyright © 2020 Eric Brown ;;; ;;; This file is part of GNU Guix. ;;; @@ -3135,3 +3136,35 @@ related tools to process winmail.dat files.") complement or replace traditional mailing lists. Readers may read via NNTP, Atom feeds or HTML archives.") (license agpl3+)))) + +(define-public sylpheed + (package + (name "sylpheed") + (version "3.7.0") + (source (origin + (method url-fetch) + (uri (string-append "https://sylpheed.sraoss.jp/sylpheed/v3.7/" + name "-" version ".tar.xz")) + (sha256 + (base32 + "0j9y5vdzch251s264diw9clrn88dn20bqqkwfmis9l7m8vmwasqd")))) + (build-system gnu-build-system) + (native-inputs + `(("pkg-config" ,pkg-config))) + (inputs + `(("bogofilter" ,bogofilter) + ("compface" ,compface) + ("gnupg" ,gnupg-1) + ("gpgme" ,gpgme) + ("gtk+-2.0" ,gtk+-2) + ("gtkspell" ,gtkspell3) + ("libnsl" ,libnsl) + ("openldap" ,openldap) + ("openssl" ,openssl))) + (home-page "https://sylpheed.sraoss.jp/en/") + (synopsis "Lightweight GTK+ email client") + (description + "Sylpheed is a simple, lightweight but featureful, and easy-to-use e-mail +client. Sylpheed provides intuitive user-interface. Sylpheed is also +designed for keyboard-oriented operation.") + (license gpl2+))) -- cgit 1.4.1 From f989dffd2c568de2082d5fe9722588e2fc0cec1f Mon Sep 17 00:00:00 2001 From: Marius Bakke Date: Sun, 26 Apr 2020 12:34:59 +0200 Subject: gnu: thinkfan: Adjust for Guile 3.0. * gnu/packages/linux.scm (thinkfan)[arguments]: Provide explicit destination in calls to FORMAT (destination is no longer optional with Guile 3). --- gnu/packages/linux.scm | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm index f2d45eb07a..9a8bbc78d8 100644 --- a/gnu/packages/linux.scm +++ b/gnu/packages/linux.scm @@ -4675,7 +4675,7 @@ feature, and a laptop with an accelerometer. It has no effect on SSDs.") (share (string-append out "/share/" ,name))) (substitute* "CMakeLists.txt" (("pkg_check_modules\\((OPENRC|SYSTEMD) .*" _ package) - (format "option(~a_FOUND \"Faked\" ON)\n" package)) + (format #f "option(~a_FOUND \"Faked\" ON)\n" package)) ;; That was easy! Now we just need to fix the destinations. (("/etc" directory) (string-append out directory))) -- cgit 1.4.1 From 02de4b1da184eb087f6eee794842ceb795cf38fe Mon Sep 17 00:00:00 2001 From: Marius Bakke Date: Sun, 26 Apr 2020 12:40:15 +0200 Subject: gnu: calcurse: Adjust for Guile 3.0. * gnu/packages/calcurse.scm (calcurse)[arguments]: Provide explicit destination in calls to FORMAT. --- gnu/packages/calcurse.scm | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/gnu/packages/calcurse.scm b/gnu/packages/calcurse.scm index 05e3907da6..d807c15d68 100644 --- a/gnu/packages/calcurse.scm +++ b/gnu/packages/calcurse.scm @@ -59,7 +59,7 @@ (lambda _ (substitute* "doc/Makefile.in" (("(docdir =) .*" _ match) - (format "~a @docdir@\n" match))) + (format #f "~a @docdir@\n" match))) #t)) (add-before 'check 'check-setup (lambda* (#:key inputs #:allow-other-keys) -- cgit 1.4.1 From 30d0f7fa8f50b3a0a56573997b5bac180691a424 Mon Sep 17 00:00:00 2001 From: Marius Bakke Date: Sun, 26 Apr 2020 12:42:35 +0200 Subject: gnu: nmoldyn: Adjust for Guile 3.0. * gnu/packages/chemistry.scm (nmoldyn)[arguments]: Provide explicit destination in calls to FORMAT. --- gnu/packages/chemistry.scm | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/gnu/packages/chemistry.scm b/gnu/packages/chemistry.scm index 2b3b5d7df6..855ae2df22 100644 --- a/gnu/packages/chemistry.scm +++ b/gnu/packages/chemistry.scm @@ -277,16 +277,16 @@ analogy is that InChI is the bar-code for chemistry and chemical structures.") ;; and Guix contains currently no free molecular viewer that ;; could be substituted. (("PREFERENCES\\['acroread_path'\\] = ''") - (format "PREFERENCES['acroread_path'] = '~a'" + (format #f "PREFERENCES['acroread_path'] = '~a'" (which "gv"))) (("PREFERENCES\\['ncdump_path'\\] = ''") - (format "PREFERENCES['ncdump_path'] = '~a'" + (format #f "PREFERENCES['ncdump_path'] = '~a'" (which "ncdump"))) (("PREFERENCES\\['ncgen_path'\\] = ''") - (format "PREFERENCES['ncgen_path'] = '~a'" + (format #f "PREFERENCES['ncgen_path'] = '~a'" (which "ncgen3"))) (("PREFERENCES\\['task_manager_path'\\] = ''") - (format "PREFERENCES['task_manager_path'] = '~a'" + (format #f "PREFERENCES['task_manager_path'] = '~a'" (which "task_manager"))) ;; Show documentation as PDF (("PREFERENCES\\['documentation_style'\\] = 'html'") -- cgit 1.4.1 From 05e3ed302f5a4dd611daf39c79e5e50502455b2d Mon Sep 17 00:00:00 2001 From: Marius Bakke Date: Sun, 26 Apr 2020 12:44:09 +0200 Subject: gnu: tpacpi-bat: Adjust for Guile 3.0. * gnu/packages/linux.scm (tpacpi-bat)[arguments]: Provide explicit destination in calls to FORMAT. --- gnu/packages/linux.scm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm index 9a8bbc78d8..12cb39ff9b 100644 --- a/gnu/packages/linux.scm +++ b/gnu/packages/linux.scm @@ -4717,11 +4717,11 @@ from userspace.") (lambda _ (substitute* "tpacpi-bat" (("cat ") - (format "~a " (which "cat"))) + (format #f "~a " (which "cat"))) ;; tpacpi-bat modprobes the acpi_call kernel module if it's not ;; loaded. That's the administrator's prerogative; disable it. (("system \"(modprobe .*)\"" _ match) - (format "die \"Please run ‘~a’ first.\\n\"" match))) + (format #f "die \"Please run ‘~a’ first.\\n\"" match))) #t)) (delete 'configure) ; nothing to configure (delete 'build) ; nothing to build -- cgit 1.4.1 From 52bdd30407756ca883dc98cc3ed776acd740f14c Mon Sep 17 00:00:00 2001 From: Marius Bakke Date: Sun, 26 Apr 2020 12:47:47 +0200 Subject: gnu: nim: Adjust for Guile 3.0. * gnu/packages/nim.scm (nim)[arguments]: Provide explicit destination in calls to FORMAT. --- gnu/packages/nim.scm | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/gnu/packages/nim.scm b/gnu/packages/nim.scm index 374a533c30..b7ab8a368b 100644 --- a/gnu/packages/nim.scm +++ b/gnu/packages/nim.scm @@ -56,7 +56,7 @@ "lib/pure/osproc.nim") (("/bin/sh") sh)) (substitute* (find-files "c_code" "stdlib_osproc.c") - (("\"/bin/sh\", 7") (format "~s, ~s" sh (string-length sh))))) + (("\"/bin/sh\", 7") (format #f "~s, ~s" sh (string-length sh))))) #t)) (replace 'build (lambda _ -- cgit 1.4.1 From 2b829898c77c4f5655db6f70de2b3a51e8f35947 Mon Sep 17 00:00:00 2001 From: Marius Bakke Date: Sun, 26 Apr 2020 12:48:56 +0200 Subject: gnu: python-publicsuffix2: Adjust for Guile 3.0. * gnu/packages/python-web.scm (python-publicsuffix2): Provide explicit destination in calls to FORMAT. --- gnu/packages/python-web.scm | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/gnu/packages/python-web.scm b/gnu/packages/python-web.scm index cc79c38acf..6b77a9d949 100644 --- a/gnu/packages/python-web.scm +++ b/gnu/packages/python-web.scm @@ -2809,7 +2809,7 @@ List.") ;; the unused ‘update_psl’ helper command. (substitute* "setup.py" (("'requests " match) - (format "# ~a" match))) + (format #f "# ~a" match))) #t))) #:tests? #f)) ; the test suite requires network access (home-page "https://github.com/pombredanne/python-publicsuffix2") -- cgit 1.4.1