From 4673f817938d9d2b1b40a072ab2e0c44a32ccc97 Mon Sep 17 00:00:00 2001 From: Maxim Cournoyer Date: Mon, 2 Aug 2021 15:48:59 -0400 Subject: Revert "services: Add a service for Jami." This reverts commit 69dcc24c9f0cdfea674eb690e7755d26a25ced2b. It broke 'guix pull'. --- doc/guix.texi | 228 ---------------------------------------------------------- 1 file changed, 228 deletions(-) (limited to 'doc') diff --git a/doc/guix.texi b/doc/guix.texi index 9a9c85678c..2298d512a1 100644 --- a/doc/guix.texi +++ b/doc/guix.texi @@ -22526,234 +22526,6 @@ and Error. @node Telephony Services @subsection Telephony Services -@cindex telephony, services -The @code{(gnu services telephony)} module contains Guix service -definitions for telephony services. Currently it provides the following -services: - -@subsubheading Jami - -@cindex jami, service - -This section describes how to configure a Jami server that can be used -to host video (or audio) conferences, among other uses. The following -example demonstrates how to specify Jami account archives (backups) to -be provisioned automatically: - -@lisp -(service jami-service-type - (jami-configuration - (accounts - (list (jami-account - (archive "/etc/jami/unencrypted-account-1.gz")) - (jami-account - (archive "/etc/jami/unencrypted-account-2.gz")))))) -@end lisp - -When the accounts field is specified, the Jami account files of the -service found under @file{/var/lib/jami} are recreated every time the -service starts. - -Jami accounts and their corresponding backup archives can be generated -using either the @code{jami-qt} or @code{jami-gnome} Jami clients. The -accounts should not be password-protected, but it is wise to ensure -their files are only readable by @samp{root}. - -The next example shows how to declare that only some contacts should be -allowed to communicate with a given account: - -@lisp -(service jami-service-type - (jami-configuration - (accounts - (list (jami-account - (archive "/etc/jami/unencrypted-account-1.gz") - (peer-discovery? #t) - (rendezvous-point? #t) - (allowed-contacts - '("1dbcb0f5f37324228235564b79f2b9737e9a008f" - "2dbcb0f5f37324228235564b79f2b9737e9a008f"))))))) -@end lisp - -In this mode, only the declared @code{allowed-contacts} can initiate -communication with the Jami account. This can be used, for example, -with rendezvous point accounts to create a private video conferencing -space. - -To put the system administrator in full control of the conferences -hosted on their system, the Jami service supports the following actions: - -@example sh -# herd doc jami list-actions jami -(list-accounts - list-account-details - list-banned-contacts - list-contacts - list-moderators - add-moderator - ban-contact - enable-account - disable-account) -@end example - -The above actions aim to provide the most valuable actions for -moderation purposes, not to cover the whole Jami API. Users wanting to -interact with the Jami daemon from Guile may be interested in -experimenting with the @code{(gnu build jami-service)} module, which -powers the above Shepherd actions. - -@c TODO: This should be auto-generated from the doc already defined on -@c the shepherd-actions themselves in (gnu services telephony). -The @code{add-moderator} and @code{ban-contact} actions accept a contact -@emph{fingerprint} (40 characters long hash) as first argument and an -account fingerprint or username as second argument: - -@example sh -# herd add-moderator jami 1dbcb0f5f37324228235564b79f2b9737e9a008f \ - f3345f2775ddfe07a4b0d95daea111d15fbc1199 - -# herd list-moderators jami -Moderators for account f3345f2775ddfe07a4b0d95daea111d15fbc1199: - - 1dbcb0f5f37324228235564b79f2b9737e9a008f - -@end example - -In the case of @code{ban-contact}, the second username argument is -optional; when omitted, the account is banned from all Jami accounts: - -@example sh -# herd ban-contact jami 1dbcb0f5f37324228235564b79f2b9737e9a008f - -# herd list-banned-contacts jami -Banned contacts for account f3345f2775ddfe07a4b0d95daea111d15fbc1199: - - 1dbcb0f5f37324228235564b79f2b9737e9a008f - -@end example - -Banned contacts are also stripped from their moderation privileges. - -The @code{disable-account} action allows to completely disconnect an -account from the network, making it unreachable, while -@code{enable-account} does the inverse. They accept a single account -username or fingerprint as first argument: - -@example sh -# herd disable-account jami f3345f2775ddfe07a4b0d95daea111d15fbc1199 - -# herd list-accounts jami -The following Jami accounts are available: - - f3345f2775ddfe07a4b0d95daea111d15fbc1199 (dummy) [disabled] - -@end example - -The @code{list-account-details} action prints the detailed parameters of -each accounts in the Recutils format, which means the @command{recsel} -command can be used to select accounts of interest (@pxref{Selection -Expressions,,,recutils, GNU recutils manual}). Note that period -characters (@samp{.}) found in the account parameter keys are mapped to -underscores (@samp{_}) in the output, to meet the requirements of the -Recutils format. The following example shows how to print the account -fingerprints for all accounts operating in the rendezvous point mode: - -@example sh -# herd list-account-details jami | \ - recsel -p Account.username -e 'Account.rendezVous ~ "true"' -Account_username: f3345f2775ddfe07a4b0d95daea111d15fbc1199 -@end example - -The remaining actions should be self-explanatory. - -The complete set of available configuration options is detailed below. - -@c TODO: Ideally, the following fragments would be auto-generated at -@c build time, so that they needn't be manually duplicated. -@c Auto-generated via (configuration->documentation 'jami-configuration) -@deftp {Data Type} jami-configuration -Available @code{jami-configuration} fields are: - -@table @asis -@item @code{jamid} (default: @code{libring}) (type: package) -The Jami daemon package to use. - -@item @code{dbus} (default: @code{dbus}) (type: package) -The D-Bus package to use to start the required D-Bus session. - -@item @code{nss-certs} (default: @code{nss-certs}) (type: package) -The nss-certs package to use to provide TLS certificates. - -@item @code{enable-logging?} (default: @code{#t}) (type: boolean) -Whether to enable logging to syslog. - -@item @code{debug?} (default: @code{#f}) (type: boolean) -Whether to enable debug level messages. - -@item @code{auto-answer?} (default: @code{#f}) (type: boolean) -Whether to force automatic answer to incoming calls. - -@item @code{accounts} (default: @code{disabled}) (type: maybe-jami-account-list) -A list of Jami accounts to be (re-)provisioned every time the Jami -daemon service starts. When providing this field, the account -directories under @file{/var/lib/jami/} are recreated every time the -service starts, ensuring a consistent state. - -@end table - -@end deftp - -@c Auto-generated via (configuration->documentation 'jami-account) -@deftp {Data Type} jami-account -Available @code{jami-account} fields are: - -@table @asis -@item @code{archive} (type: string-or-computed-file) -The account archive (backup) file name of the account. This is used to -provision the account when the service starts. The account archive -should @emph{not} be encrypted. It is highly recommended to make it -readable only to the @samp{root} user (i.e., not in the store), to guard -against leaking the secret key material of the Jami account it contains. - -@item @code{allowed-contacts} (default: @code{disabled}) (type: maybe-account-fingerprint-list) -The list of allowed contacts for the account, entered as their 40 -characters long fingerprint. Messages or calls from accounts not in -that list will be rejected. When unspecified, the configuration of the -account archive is used as-is with respect to contacts and public -inbound calls/messaging allowance, which typically defaults to allow any -contact to communicate with the account. - -@item @code{moderators} (default: @code{disabled}) (type: maybe-account-fingerprint-list) -The list of contacts that should have moderation privileges (to ban, -mute, etc. other users) in rendezvous conferences, entered as their 40 -characters long fingerprint. When unspecified, the configuration of the -account archive is used as-is with respect to moderation, which -typically defaults to allow anyone to moderate. - -@item @code{rendezvous-point?} (default: @code{disabled}) (type: maybe-boolean) -Whether the account should operate in the rendezvous mode. In this -mode, all the incoming audio/video calls are mixed into a conference. -When left unspecified, the value from the account archive prevails. - -@item @code{peer-discovery?} (default: @code{disabled}) (type: maybe-boolean) -Whether peer discovery should be enabled. Peer discovery is used to -discover other OpenDHT nodes on the local network, which can be useful -to maintain communication between devices on such network even when the -connection to the the Internet has been lost. When left unspecified, -the value from the account archive prevails. - -@item @code{bootstrap-hostnames} (default: @code{disabled}) (type: maybe-string-list) -A list of hostnames or IPs pointing to OpenDHT nodes, that should be -used to initially join the OpenDHT network. When left unspecified, the -value from the account archive prevails. - -@item @code{name-server-uri} (default: @code{disabled}) (type: maybe-string) -The URI of the name server to use, that can be used to retrieve the -account fingerprint for a registered username. - -@end table - -@end deftp - -@subsubheading Murmur (VoIP server) - @cindex Murmur (VoIP server) @cindex VoIP server This section describes how to set up and run a Murmur server. Murmur is -- cgit 1.4.1