@node Contributing @chapter Contributing This project is a cooperative effort, and we need your help to make it grow! Please get in touch with us on @email{guix-devel@@gnu.org} and @code{#guix} on the Freenode IRC network. We welcome ideas, bug reports, patches, and anything that may be helpful to the project. We particularly welcome help on packaging (@pxref{Packaging Guidelines}). @cindex code of conduct, of contributors @cindex contributor covenant We want to provide a warm, friendly, and harassment-free environment, so that anyone can contribute to the best of their abilities. To this end our project uses a ``Contributor Covenant'', which was adapted from @url{http://contributor-covenant.org/}. You can find a local version in the @file{CODE-OF-CONDUCT} file in the source tree. Contributors are not required to use their legal name in patches and on-line communication; they can use any name or pseudonym of their choice. @menu * Building from Git:: The latest and greatest. * Running Guix Before It Is Installed:: Hacker tricks. * The Perfect Setup:: The right tools. * Coding Style:: Hygiene of the contributor. * Submitting Patches:: Share your work. @end menu @node Building from Git @section Building from Git If you want to hack Guix itself, it is recommended to use the latest version from the Git repository: @example git clone https://git.savannah.gnu.org/git/guix.git @end example When building Guix from a checkout, the following packages are required in addition to those mentioned in the installation instructions (@pxref{Requirements}). @itemize @item @url{http://gnu.org/software/autoconf/, GNU Autoconf}; @item @url{http://gnu.org/software/automake/, GNU Automake}; @item @url{http://gnu.org/software/gettext/, GNU Gettext}; @item @url{http://gnu.org/software/texinfo/, GNU Texinfo}; @item @url{http://www.graphviz.org/, Graphviz}; @item @url{http://www.gnu.org/software/help2man/, GNU Help2man (optional)}. @end itemize The easiest way to set up a development environment for Guix is, of course, by using Guix! The following command starts a new shell where all the dependencies and appropriate environment variables are set up to hack on Guix: @example guix environment guix @end example @xref{Invoking guix environment}, for more information on that command. Extra dependencies can be added with @option{--ad-hoc}: @example guix environment guix --ad-hoc help2man git strace @end example Run @command{./bootstrap} to generate the build system infrastructure using Autoconf and Automake. If you get an error like this one: @example configure.ac:46: error: possibly undefined macro: PKG_CHECK_MODULES @end example @noindent it probably means that Autoconf couldn’t find @file{pkg.m4}, which is provided by pkg-config. Make sure that @file{pkg.m4} is available. The same holds for the @file{guile.m4} set of macros provided by Guile. For instance, if you installed Automake in @file{/usr/local}, it wouldn’t look for @file{.m4} files in @file{/usr/share}. In that case, you have to invoke the following command: @example export ACLOCAL_PATH=/usr/share/aclocal @end example @xref{Macro Search Path,,, automake, The GNU Automake Manual}, for more information. Then, run @command{./configure} as usual. Make sure to pass @code{--localstatedir=@var{directory}} where @var{directory} is the @code{localstatedir} value used by your current installation (@pxref{The Store}, for information about this). Finally, you have to invoke @code{make check} to run tests (@pxref{Running the Test Suite}). If anything fails, take a look at installation instructions (@pxref{Installation}) or send a message to the @email{guix-devel@@gnu.org, mailing list}. @node Running Guix Before It Is Installed @section Running Guix Before It Is Installed In order to keep a sane working environment, you will find it useful to test the changes made in your local source tree checkout without actually installing them. So that you can distinguish between your ``end-user'' hat and your ``motley'' costume. To that end, all the command-line tools can be used even if you have not run @code{make install}. To do that, prefix each command with @command{./pre-inst-env} (the @file{pre-inst-env} script lives in the top build tree of Guix), as in: @example $ sudo ./pre-inst-env guix-daemon --build-users-group=guixbuild $ ./pre-inst-env guix build hello @end example @noindent Similarly, for a Guile session using the Guix modules: @example $ ./pre-inst-env guile -c '(use-modules (guix utils)) (pk (%current-system))' ;;; ("x86_64-linux") @end example @noindent @cindex REPL @cindex read-eval-print loop @dots{} and for a REPL (@pxref{Using Guile Interactively,,, guile, Guile Reference Manual}): @example $ ./pre-inst-env guile scheme@@(guile-user)> ,use(guix) scheme@@(guile-user)> ,use(gnu) scheme@@(guile-user)> (define snakes (fold-packages (lambda (package lst) (if (string-prefix? "python" (package-name package)) (cons package lst) lst)) '())) scheme@@(guile-user)> (length snakes) $1 = 361 @end example The @command{pre-inst-env} script sets up all the environment variables necessary to support this, including @env{PATH} and @env{GUILE_LOAD_PATH}. Note that @command{./pre-inst-env guix pull} does @emph{not} upgrade the local source tree; it simply updates the @file{~/.config/guix/latest} symlink (@pxref{Invoking guix pull}). Run @command{git pull} instead if you want to upgrade your local source tree.@footnote{If you would like to set up @command{guix} to use your Git checkout, you can point the @file{~/.config/guix/latest} symlink to your Git checkout directory. If you are the sole user of your system, you may also consider pointing the @file{/root/.config/guix/latest} symlink to point to @file{~/.config/guix/latest}; this way it will always use the same @command{guix} as your user does.} @node The Perfect Setup @section The Perfect Setup The Perfect Setup to hack on Guix is basically the perfect setup used for Guile hacking (@pxref{Using Guile in Emacs,,, guile, Guile Reference Manual}). First, you need more than an editor, you need @url{http://www.gnu.org/software/emacs, Emacs}, empowered by the wonderful @url{http://nongnu.org/geiser/, Geiser}. Geiser allows for interactive and incremental development from within Emacs: code compilation and evaluation from within buffers, access to on-line documentation (docstrings), context-sensitive completion, @kbd{M-.} to jump to an object definition, a REPL to try out your code, and more (@pxref{Introduction,,, geiser, Geiser User Manual}). For convenient Guix development, make sure to augment Guile’s load path so that it finds source files from your checkout: @lisp ;; @r{Assuming the Guix checkout is in ~/src/guix.} (with-eval-after-load 'geiser-guile (add-to-list 'geiser-guile-load-path "~/src/guix")) @end lisp To actually edit the code, Emacs already has a neat Scheme mode. But in addition to that, you must not miss @url{http://www.emacswiki.org/emacs/ParEdit, Paredit}. It provides facilities to directly operate on the syntax tree, such as raising an s-expression or wrapping it, swallowing or rejecting the following s-expression, etc. @node Coding Style @section Coding Style In general our code follows the GNU Coding Standards (@pxref{Top,,, standards, GNU Coding Standards}). However, they do not say much about Scheme, so here are some additional rules. @menu * Programming Paradigm:: How to compose your elements. * Modules:: Where to store your code? * Data Types and Pattern Matching:: Implementing data structures. * Formatting Code:: Writing conventions. @end menu @node Programming Paradigm @subsection Programming Paradigm Scheme code in Guix is written in a purely functional style. One exception is code that involves input/output, and procedures that implement low-level concepts, such as the @code{memoize} procedure. @node Modules @subsection Modules Guile modules that are meant to be used on the builder side must live in the @code{(guix build @dots{})} name space. They must not refer to other Guix or GNU modules. However, it is OK for a ``host-side'' module to use a build-side module. Modules that deal with the broader GNU system should be in the @code{(gnu @dots{})} name space rather than @code{(guix @dots{})}. @node Data Types and Pattern Matching @subsection Data Types and Pattern Matching The tendency in classical Lisp is to use lists to represent everything, and then to browse them ``by hand'' using @code{car}, @code{cdr}, @code{cadr}, and co. There are several problems with that style, notably the fact that it is hard to read, error-prone, and a hindrance to proper type error reports. Guix code should define appropriate data types (for instance, using @code{define-record-type*}) rather than abuse lists. In addition, it should use pattern matching, via Guile’s @code{(ice-9 match)} module, especially when matching lists. @node Formatting Code @subsection Formatting Code @cindex formatting code @cindex coding style When writing Scheme code, we follow common wisdom among Scheme programmers. In general, we follow the @url{http://mumble.net/~campbell/scheme/style.txt, Riastradh's Lisp Style Rules}. This document happens to describe the conventions mostly used in Guile’s code too. It is very thoughtful and well written, so please do read it. Some special forms introduced in Guix, such as the @code{substitute*} macro, have special indentation rules. These are defined in the @file{.dir-locals.el} file, which Emacs automatically uses. Also note that Emacs-Guix provides @code{guix-devel-mode} mode that indents and highlights Guix code properly (@pxref{Development,,, emacs-guix, The Emacs-Guix Reference Manual}). @cindex indentation, of code @cindex formatting, of code If you do not use Emacs, please make sure to let your editor knows these rules. To automatically indent a package definition, you can also run: @example ./etc/indent-code.el gnu/packages/@var{file}.scm @var{package} @end example @noindent This automatically indents the definition of @var{package} in @file{gnu/packages/@var{file}.scm} by running Emacs in batch mode. To indent a whole file, omit the second argument: @example ./etc/indent-code.el gnu/services/@var{file}.scm @end example We require all top-level procedures to carry a docstring. This requirement can be relaxed for simple private procedures in the @code{(guix build @dots{})} name space, though. Procedures should not have more than four positional parameters. Use keyword parameters for procedures that take more than four parameters. @node Submitting Patches @section Submitting Patches Development is done using the Git distributed version control system. Thus, access to the repository is not strictly necessary. We welcome contributions in the form of patches as produced by @code{git format-patch} sent to the @email{guix-patches@@gnu.org} mailing list. This mailing list is backed by a Debbugs instance accessible at @uref{https://bugs.gnu.org/guix-patches}, which allows us to keep track of submissions. Each message sent to that mailing list gets a new tracking number assigned; people can then follow up on the submission by sending email to @code{@var{NNN}@@debbugs.gnu.org}, where @var{NNN} is the tracking number (@pxref{Sending a Patch Series}). Please write commit logs in the ChangeLog format (@pxref{Change Logs,,, standards, GNU Coding Standards}); you can check the commit history for examples. Before submitting a patch that adds or modifies a package definition, please run through this check list: @enumerate @item Take some time to provide an adequate synopsis and description for the package. @xref{Synopses and Descriptions}, for some guidelines. @item Run @code{guix lint @var{package}}, where @var{package} is the name of the new or modified package, and fix any errors it reports (@pxref{Invoking guix lint}). @item Make sure the package builds on your platform, using @code{guix build @var{package}}. @item @cindex bundling Make sure the package does not use bundled copies of software already available as separate packages. Sometimes, packages include copies of the source code of their dependencies as a convenience for users. However, as a distribution, we want to make sure that such packages end up using the copy we already have in the distribution, if there is one. This improves resource usage (the dependency is built and stored only once), and allows the distribution to make transverse changes such as applying security updates for a given software package in a single place and have them affect the whole system---something that bundled copies prevent. @item If the authors of the packaged software provide a cryptographic signature for the release tarball, make an effort to verify the authenticity of the archive. For a detached GPG signature file this would be done with the @code{gpg --verify} command. @item Take a look at the profile reported by @command{guix size} (@pxref{Invoking guix size}). This will allow you to notice references to other packages unwillingly retained. It may also help determine whether to split the package (@pxref{Packages with Multiple Outputs}), and which optional dependencies should be used. @item For important changes, check that dependent package (if applicable) are not affected by the change; @code{guix refresh --list-dependent @var{package}} will help you do that (@pxref{Invoking guix refresh}). @c See <https://lists.gnu.org/archive/html/guix-devel/2016-10/msg00933.html>. @cindex branching strategy @cindex rebuild scheduling strategy Depending on the number of dependent packages and thus the amount of rebuilding induced, commits go to different branches, along these lines: @table @asis @item 300 dependent packages or less @code{master} branch (non-disruptive changes). @item between 300 and 1,200 dependent packages @code{staging} branch (non-disruptive changes). This branch is intended to be merged in @code{master} every 3 weeks or so. Topical changes (e.g., an update of the GNOME stack) can instead go to a specific branch (say, @code{gnome-updates}). @item more than 1,200 dependent packages @code{core-updates} branch (may include major and potentially disruptive changes). This branch is intended to be merged in @code{master} every 2.5 months or so. @end table All these branches are tracked by our build farm and merged into @code{master} once everything has been successfully built. This allows us to fix issues before they hit users, and to reduce the window during which pre-built binaries are not available. @item @cindex determinism, of build processes @cindex reproducible builds, checking Check whether the package's build process is deterministic. This typically means checking whether an independent build of the package yields the exact same result that you obtained, bit for bit. A simple way to do that is by building the same package several times in a row on your machine (@pxref{Invoking guix build}): @example guix build --rounds=2 my-package @end example This is enough to catch a class of common non-determinism issues, such as timestamps or randomly-generated output in the build result. Another option is to use @command{guix challenge} (@pxref{Invoking guix challenge}). You may run it once the package has been committed and built by @code{hydra.gnu.org} to check whether it obtains the same result as you did. Better yet: Find another machine that can build it and run @command{guix publish}. Since the remote build machine is likely different from yours, this can catch non-determinism issues related to the hardware---e.g., use of different instruction set extensions---or to the operating system kernel---e.g., reliance on @code{uname} or @file{/proc} files. @item When writing documentation, please use gender-neutral wording when referring to people, such as @uref{https://en.wikipedia.org/wiki/Singular_they, singular ``they''@comma{} ``their''@comma{} ``them''}, and so forth. @item Verify that your patch contains only one set of related changes. Bundling unrelated changes together makes reviewing harder and slower. Examples of unrelated changes include the addition of several packages, or a package update along with fixes to that package. @item Please follow our code formatting rules, possibly running the @command{etc/indent-code.el} script to do that automatically for you (@pxref{Formatting Code}). @end enumerate When posting a patch to the mailing list, use @samp{[PATCH] @dots{}} as a subject. You may use your email client or the @command{git send-email} command (@pxref{Sending a Patch Series}). We prefer to get patches in plain text messages, either inline or as MIME attachments. You are advised to pay attention if your email client changes anything like line breaks or indentation which could potentially break the patches. When a bug is resolved, please close the thread by sending an email to @email{@var{NNN}-done@@debbugs.gnu.org}. @unnumberedsubsec Sending a Patch Series @anchor{Sending a Patch Series} @cindex patch series @cindex @code{git send-email} @cindex @code{git-send-email} When sending a patch series (e.g., using @code{git send-email}), please first send one message to @email{guix-patches@@gnu.org}, and then send subsequent patches to @email{@var{NNN}@@debbugs.gnu.org} to make sure they are kept together. See @uref{https://debbugs.gnu.org/Advanced.html, the Debbugs documentation} for more information. @c Debbugs bug: https://debbugs.gnu.org/db/15/15361.html