\input texinfo
@c -*-texinfo-*-

@c %**start of header
@setfilename guix.info
@documentencoding UTF-8
@settitle GNU Guix Reference Manual
@c %**end of header

@include version.texi
@set YEARS 2012, 2013

@dircategory Package management
@direntry
* guix: (guix).       Guix, the functional package manager.
* guix package: (guix)Invoking guix package
                      Managing packages with Guix.
* guix build: (guix)Invoking guix build
                      Building packages with Guix.
@end direntry

@titlepage
@title GNU Guix Reference Manual
@subtitle Using the GNU Guix Functional Package Manager
@author Ludovic Courtès
@author Andreas Enge
@author Nikita Karetnikov

@page
@vskip 0pt plus 1filll
Edition @value{EDITION} @*
@value{UPDATED} @*

Copyright @copyright{} @value{YEARS} Ludovic Court@`es, Andreas Enge, Nikita Karetnikov

@ifinfo
@quotation
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.  A
copy of the license is included in the section entitled ``GNU Free
Documentation License''.
@end quotation
@end ifinfo

@end titlepage

@copying
This manual documents GNU Guix version @value{VERSION}.

Copyright @copyright{} @value{YEARS} Ludovic Courtès

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.  A
copy of the license is included in the section entitled ``GNU Free
Documentation License.''
@end copying

@contents

@c *********************************************************************
@node Top
@top GNU Guix

This document describes GNU Guix version @value{VERSION}, a functional
package management tool written for the GNU system.


@quotation
Copyright @copyright{} @value{YEARS} Ludovic Courtès, Andreas Enge, Nikita Karetnikov

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.  A
copy of the license is included in the section entitled ``GNU Free
Documentation License.''
@end quotation

@menu
* Introduction::                What is Guix about?
* Installation::                Installing Guix.
* Package Management::          Package installation, upgrade, etc.
* Programming Interface::       Using Guix in Scheme.
* Utilities::                   Package management commands.
* GNU Distribution::            Software for your friendly GNU system.
* Contributing::                Your help needed!

* Acknowledgments::             Thanks!
* GNU Free Documentation License::  The license of this manual.
* Concept Index::               Concepts.
* Function Index::              Functions.
@end menu

@c *********************************************************************
@node Introduction
@chapter Introduction

GNU Guix@footnote{``Guix'' is pronounced like ``geeks'', or ``ɡiːks''
using the international phonetic alphabet (IPA).} is a functional
package management tool for the GNU system.  Package management consists
of all activities that relate to building packages from sources,
honoring their build-time and run-time dependencies,
installing packages in user environments, upgrading installed packages
to new versions or rolling back to a previous set, removing unused
software packages, etc.

@cindex functional package management
The term @dfn{functional} refers to a specific package management
discipline.  In Guix, the package build and installation process is seen
as a function, in the mathematical sense.  That function takes inputs,
such as build scripts, a compiler, and libraries, and
returns an installed package.  As a pure function, its result depends
solely on its inputs---for instance, it cannot refer to software or
scripts that were not explicitly passed as inputs.  A build function
always produces the same result when passed a given set of inputs.  It
cannot alter the system's environment in
any way; for instance, it cannot create, modify, or delete files outside
of its build and installation directories.  This is achieved by running
build processes in isolated environments (or @dfn{chroots}), where only their
explicit inputs are visible.

@cindex store
The result of package build functions is @dfn{cached} in the file
system, in a special directory called @dfn{the store} (@pxref{The
Store}).  Each package is installed in a directory of its own, in the
store---by default under @file{/nix/store}.  The directory name contains
a hash of all the inputs used to build that package; thus, changing an
input yields a different directory name.

This approach is the foundation of Guix's salient features: support for
transactional package upgrade and rollback, per-user installation, and
garbage collection of packages (@pxref{Features}).

Guix has a command-line interface, which allows users to build, install,
upgrade, and remove packages, as well as a Scheme programming interface.

Last but not least, Guix is used to build a distribution of the GNU
system, with many GNU and non-GNU free software packages.  @xref{GNU
Distribution}.

@c *********************************************************************
@node Installation
@chapter Installation

GNU Guix is available for download from its website at
@url{http://www.gnu.org/software/guix/}.  This section describes the
software requirements of Guix, as well as how to install it and get
ready to use it.

The build procedure for Guix is the same as for other GNU software, and
is not covered here.  Please see the files @file{README} and
@file{INSTALL} in the Guix source tree for additional details.

@menu
* Requirements::                Software needed to build and run Guix.
* Setting Up the Daemon::       Preparing the build daemon's environment.
* Invoking guix-daemon::        Running the build daemon.
@end menu

@node Requirements
@section Requirements

GNU Guix depends on the following packages:

@itemize
@item @url{http://gnu.org/software/guile/, GNU Guile}, version 2.0.5 or later;
@item @url{http://gnupg.org/, GNU libgcrypt}
@end itemize

Unless @code{--disable-daemon} was passed to @command{configure}, the
following packages are also needed:

@itemize
@item @url{http://sqlite.org, SQLite 3}
@item @url{http://www.bzip.org, libbz2}
@item @url{http://gcc.gnu.org, GCC's g++}
@end itemize

When a working installation of @url{http://nixos.org/nix/, the Nix package
manager} is available, you
can instead configure Guix with @code{--disable-daemon}.  In that case,
Nix replaces the three dependencies above.

Guix is compatible with Nix, so it is possible to share the same store
between both.  To do so, you must pass @command{configure} not only the
same @code{--with-store-dir} value, but also the same
@code{--localstatedir} value.  The latter is essential because it
specifies where the database that stores metadata about the store is
located, among other things.  The default values are
@code{--with-store-dir=/nix/store} and @code{--localstatedir=/nix/var}.
Note that @code{--disable-daemon} is not required if
your goal is to share the store with Nix.

@node Setting Up the Daemon
@section Setting Up the Daemon

@cindex daemon
Operations such as building a package or running the garbage collector
are all performed by a specialized process, the @dfn{Guix daemon}, on
behalf of clients.  Only the daemon may access the store and its
associated database.  Thus, any operation that manipulates the store
goes through the daemon.  For instance, command-line tools such as
@command{guix package} and @command{guix build} communicate with the
daemon (@i{via} remote procedure calls) to instruct it what to do.

In a standard multi-user setup, Guix and its daemon---the
@command{guix-daemon} program---are installed by the system
administrator; @file{/nix/store} is owned by @code{root} and
@command{guix-daemon} runs as @code{root}.  Unprivileged users may use
Guix tools to build packages or otherwise access the store, and the
daemon will do it on their behalf, ensuring that the store is kept in a
consistent state, and allowing built packages to be shared among users.

@cindex build users
When @command{guix-daemon} runs as @code{root}, you may not want package
build processes themselves to run as @code{root} too, for obvious
security reasons.  To avoid that, a special pool of @dfn{build users}
should be created for use by build processes started by the daemon.
These build users need not have a shell and a home directory: they will
just be used when the daemon drops @code{root} privileges in build
processes.  Having several such users allows the daemon to launch
distinct build processes under separate UIDs, which guarantees that they
do not interfere with each other---an essential feature since builds are
regarded as pure functions (@pxref{Introduction}).

On a GNU/Linux system, a build user pool may be created like this (using
Bash syntax and the @code{shadow} commands):

@c See http://lists.gnu.org/archive/html/bug-guix/2013-01/msg00239.html
@c for why `-G' is needed.
@example
# groupadd guix-builder
# for i in `seq 1 10`;
  do
    useradd -g guix-builder -G guix-builder           \
            -d /var/empty -s `which nologin`          \
            -c "Guix build user $i" guix-builder$i;
  done
@end example

@noindent
The @code{guix-daemon} program may then be run as @code{root} with:

@example
# guix-daemon --build-users-group=guix-builder
@end example

@noindent
This way, the daemon starts build processes in a chroot, under one of
the @code{guix-builder} users.  On GNU/Linux, by default, the chroot
environment contains nothing but the @code{/dev} and @code{/proc}
directories@footnote{On some systems @code{/dev/shm}, which supports
shared memory, is a symlink to another directory such as
@code{/run/shm}, that is @emph{not} is the chroot.  When that is the
case, shared memory support is unavailable in the chroot environment.
The workaround is to make sure that @file{/dev/shm} is directly a
@code{tmpfs} mount point.}.

Guix may also be used in a single-user setup, with @command{guix-daemon}
running as an unprivileged user.  However, to maximize non-interference
of build processes, the daemon still needs to perform certain operations
that are restricted to @code{root} on GNU/Linux: it should be able to
run build processes in a chroot, and to run them under different UIDs.
To that end, the @command{nix-setuid-helper} program is provided; it is
a small C program (less than 300 lines) that, if it is made setuid
@code{root}, can be executed by the daemon to perform these operations
on its behalf.  The @code{root}-owned @file{/etc/nix-setuid.conf} file
is read by @command{nix-setuid-helper}; it should contain exactly two
words: the user name under which the authorized @command{guix-daemon}
runs, and the name of the build users group.

If you are installing Guix as an unprivileged user and do not have the
ability to make @file{nix-setuid-helper} setuid-@code{root}, it is still
possible to run @command{guix-daemon}.  However, build processes will
not be isolated from one another, and not from the rest of the system.
Thus, build processes may interfere with each other, and may access
programs, libraries, and other files available on the system---making it
much harder to view them as @emph{pure} functions.

@node Invoking guix-daemon
@section Invoking @command{guix-daemon}

The @command{guix-daemon} program implements all the functionality to
access the store.  This includes launching build processes, running the
garbage collector, querying the availability of a build result, etc.  It
is normally run as @code{root} like this:

@example
# guix-daemon --build-users-group=guix-builder
@end example

@noindent
For details on how to set it up, @ref{Setting Up the Daemon}.

By default, @command{guix-daemon} launches build processes under
different UIDs, taken from the build group specified with
@code{--build-users-group}.  In addition, each build process is run in a
chroot environment that only contains the subset of the store that the
build process depends on, as specified by its derivation
(@pxref{Programming Interface, derivation}), plus a set of specific
system directories.  By default, the latter contains @file{/dev} and
@file{/dev/pts}.

The following command-line options are supported:

@table @code
@item --build-users-group=@var{group}
Take users from @var{group} to run build processes (@pxref{Setting Up
the Daemon, build users}).

@item --no-substitutes
Do not use substitutes for build products.  That is, always build things
locally instead of allowing downloads of pre-built binaries.

@item --cache-failures
Cache build failures.  By default, only successful builds are cached.

@item --cores=@var{n}
@itemx -c @var{n}
Use @var{n} CPU cores to build each derivation; @code{0} means as many
as available.

The default value is @code{1}, but it may be overridden by clients, such
as the @code{--cores} option of @command{guix build} (@pxref{Invoking
guix build}).

The effect is to define the @code{NIX_BUILD_CORES} environment variable
in the build process, which can then use it to exploit internal
parallelism---for instance, by running @code{make -j$NIX_BUILD_CORES}.

@item --max-jobs=@var{n}
@itemx -M @var{n}
Allow at most @var{n} build jobs in parallel.  The default value is
@code{1}.

@item --debug
Produce debugging output.

This is useful to debug daemon start-up issues, but then it may be
overridden by clients, for example the @code{--verbosity} option of
@command{guix build} (@pxref{Invoking guix build}).

@item --chroot-directory=@var{dir}
Add @var{dir} to the build chroot.

Doing this may change the result of build processes---for instance if
they use optional dependencies found in @var{dir} when it is available,
and not otherwise.  For that reason, it is not recommended to do so.
Instead, make sure that each derivation declares all the inputs that it
needs.

@item --disable-chroot
Disable chroot builds.

Using this option is not recommended since, again, it would allow build
processes to gain access to undeclared dependencies.

@item --disable-log-compression
Disable compression of the build logs.

Unless @code{--lose-logs} is used, all the build logs are kept in the
@var{localstatedir}.  To save space, the daemon automatically compresses
them with bzip2 by default.  This option disables that.

@item --disable-store-optimization
Disable automatic file ``deduplication'' in the store.

By default, files added to the store are automatically ``deduplicated'':
if a newly added file is identical as another one found in the store,
the daemon makes the new file a hard link to the other file.  This
slightly increases the input/output load at the end of a build process.
This option disables this.

@item --impersonate-linux-2.6
On Linux-based systems, impersonate Linux 2.6.  This means that the
kernel's @code{uname} system call will report 2.6 as the release number.

This might be helpful to build programs that (usually wrongfully) depend
on the kernel version number.

@item --lose-logs
Do not keep build logs.  By default they are kept under
@code{@var{localstatedir}/nix/log}.

@item --system=@var{system}
Assume @var{system} as the current system type.  By default it is the
architecture/kernel pair found at configure time, such as
@code{x86_64-linux}.

@item --listen=@var{socket}
Listen for connections on @var{socket}, the file name of a Unix-domain
socket.  The default socket is
@file{@var{localstatedir}/daemon-socket/socket}.  This option is only
useful in exceptional circumstances, such as if you need to run several
daemons on the same machine.
@end table


@c *********************************************************************
@node Package Management
@chapter Package Management

The purpose of GNU Guix is to allow users to easily install, upgrade, and
remove software packages, without having to know about their build
procedure or dependencies.  Guix also goes beyond this obvious set of
features.

This chapter describes the main features of Guix, as well as the package
management tools it provides.

@menu
* Features::                    How Guix will make your life brighter.
* Invoking guix package::       Package installation, removal, etc.
* Packages with Multiple Outputs:: Single source package, multiple outputs.
* Invoking guix gc::            Running the garbage collector.
* Invoking guix pull::          Fetching the latest Guix and distribution.
@end menu

@node Features
@section Features

When using Guix, each package ends up in the @dfn{package store}, in its
own directory---something that resembles
@file{/nix/store/xxx-package-1.2}, where @code{xxx} is a base32 string.

Instead of referring to these directories, users have their own
@dfn{profile}, which points to the packages that they actually want to
use.  These profiles are stored within each user's home directory, at
@code{$HOME/.guix-profile}.

For example, @code{alice} installs GCC 4.7.2.  As a result,
@file{/home/alice/.guix-profile/bin/gcc} points to
@file{/nix/store/@dots{}-gcc-4.7.2/bin/gcc}.  Now, on the same machine,
@code{bob} had already installed GCC 4.8.0.  The profile of @code{bob}
simply continues to point to
@file{/nix/store/@dots{}-gcc-4.8.0/bin/gcc}---i.e., both versions of GCC
coexist on the same system without any interference.

The @command{guix package} command is the central tool to manage
packages (@pxref{Invoking guix package}).  It operates on those per-user
profiles, and can be used @emph{with normal user privileges}.

The command provides the obvious install, remove, and upgrade
operations.  Each invocation is actually a @emph{transaction}: either
the specified operation succeeds, or nothing happens.  Thus, if the
@command{guix package} process is terminated during the transaction,
or if a power outage occurs during the transaction, then the user's
profile remains in its previous state, and remains usable.

In addition, any package transaction may be @emph{rolled back}.  So, if,
for example, an upgrade installs a new version of a package that turns
out to have a serious bug, users may roll back to the previous instance
of their profile, which was known to work well.

All those packages in the package store may be @emph{garbage-collected}.
Guix can determine which packages are still referenced by the user
profiles, and remove those that are provably no longer referenced
(@pxref{Invoking guix gc}).  Users may also explicitly remove old
generations of their profile so that the packages they refer to can be
collected.

Finally, Guix takes a @dfn{purely functional} approach to package
management, as described in the introduction (@pxref{Introduction}).
Each @file{/nix/store} package directory name contains a hash of all the
inputs that were used to build that package---compiler, libraries, build
scripts, etc.  This direct correspondence allows users to make sure a
given package installation matches the current state of their
distribution, and helps maximize @dfn{reproducibility}.

This foundation allows Guix to support @dfn{transparent binary/source
deployment}.  When a pre-built binary for a @file{/nix/store} path is
available from an external source, Guix just downloads it; otherwise, it
builds the package from source, locally.

@node Invoking guix package
@section Invoking @command{guix package}

The @command{guix package} command is the tool that allows users to
install, upgrade, and remove packages, as well as rolling back to
previous configurations.  It operates only on the user's own profile,
and works with normal user privileges (@pxref{Features}).  Its syntax
is:

@example
guix package @var{options}
@end example

Primarily, @var{options} specifies the operations to be performed during
the transaction.  Upon completion, a new profile is created, but
previous generations of the profile remain available, should the user
want to roll back.

For each user, a symlink to the user's default profile is automatically
created in @file{$HOME/.guix-profile}.  This symlink always points to the
current generation of the user's default profile.  Thus, users can add
@file{$HOME/.guix-profile/bin} to their @code{PATH} environment
variable, and so on.

In a multi-user setup, user profiles must be stored in a place
registered as a @dfn{garbage-collector root}, which
@file{$HOME/.guix-profile} points to (@pxref{Invoking guix gc}).  That
directory is normally
@code{@var{localstatedir}/profiles/per-user/@var{user}}, where
@var{localstatedir} is the value passed to @code{configure} as
@code{--localstatedir}, and @var{user} is the user name.  It must be
created by @code{root}, with @var{user} as the owner.  When it does not
exist, or is not owned by @var{user}, @command{guix package} emits an
error about it.

The @var{options} can be among the following:

@table @code

@item --install=@var{package}
@itemx -i @var{package}
Install @var{package}.

@var{package} may specify either a simple package name, such as
@code{guile}, or a package name followed by a hyphen and version number,
such as @code{guile-1.8.8}.  If no version number is specified, the
newest available version will be selected.  In addition, @var{package}
may contain a colon, followed by the name of one of the outputs of the
package, as in @code{gcc:doc} or @code{binutils-2.22:lib}
(@pxref{Packages with Multiple Outputs}).

@cindex propagated inputs
Sometimes packages have @dfn{propagated inputs}: these are dependencies
that automatically get installed along with the required package.

An example is the GNU MPC library: its C header files refer to those of
the GNU MPFR library, which in turn refer to those of the GMP library.
Thus, when installing MPC, the MPFR and GMP libraries also get installed
in the profile; removing MPC also removes MPFR and GMP---unless they had
also been explicitly installed independently.

Besides, packages sometime rely on the definition of environment
variables for their search paths (see explanation of
@code{--search-paths} below.)  Any missing or possibly incorrect
environment variable definitions are reported here.

@c XXX: keep me up-to-date
Finally, when installing a GNU package, the tool reports the
availability of a newer upstream version.  In the future, it may provide
the option of installing directly from the upstream version, even if
that version is not yet in the distribution.

@item --install-from-expression=@var{exp}
@itemx -e @var{exp}
Install the package @var{exp} evaluates to.

@var{exp} must be a Scheme expression that evaluates to a
@code{<package>} object.  This option is notably useful to disambiguate
between same-named variants of a package, with expressions such as
@code{(@@ (gnu packages base) guile-final)}.

Note that this option installs the first output of the specified
package, which may be insufficient when needing a specific output of a
multiple-output package.

@item --remove=@var{package}
@itemx -r @var{package}
Remove @var{package}.

@item --upgrade[=@var{regexp}]
@itemx -u [@var{regexp}]
Upgrade all the installed packages.  When @var{regexp} is specified, upgrade
only installed packages whose name matches @var{regexp}.

Note that this upgrades package to the latest version of packages found
in the distribution currently installed.  To update your distribution,
you should regularly run @command{guix pull} (@pxref{Invoking guix
pull}).

@item --roll-back
Roll back to the previous @dfn{generation} of the profile---i.e., undo
the last transaction.

When combined with options such as @code{--install}, roll back occurs
before any other actions.

When rolling back from the first generation that actually contains
installed packages, the profile is made to point to the @dfn{empty
profile}, also known as @dfn{profile zero}---i.e., it contains no files
apart from its own meta-data.

Installing, removing, or upgrading packages from a generation that has
been rolled back to overwrites previous future generations.  Thus, the
history of a profile's generations is always linear.

@item --search-paths
@cindex search paths
Report environment variable definitions, in Bash syntax, that may be
needed in order to use the set of installed packages.  These environment
variables are used to specify @dfn{search paths} for files used by some
of the installed packages.

For example, GCC needs the @code{CPATH} and @code{LIBRARY_PATH}
environment variables to be defined so it can look for headers and
libraries in the user's profile (@pxref{Environment Variables,,, gcc,
Using the GNU Compiler Collection (GCC)}).  If GCC and, say, the C
library are installed in the profile, then @code{--search-paths} will
suggest setting these variables to @code{@var{profile}/include} and
@code{@var{profile}/lib}, respectively.

@item --profile=@var{profile}
@itemx -p @var{profile}
Use @var{profile} instead of the user's default profile.

@item --dry-run
@itemx -n
Show what would be done without actually doing it.

@item --fallback
When substituting a pre-built binary fails, fall back to building
packages locally.

@item --no-substitutes
@itemx --max-silent-time=@var{seconds}
Same as for @command{guix build} (@pxref{Invoking guix build}).

@item --verbose
Produce verbose output.  In particular, emit the environment's build log
on the standard error port.

@item --bootstrap
Use the bootstrap Guile to build the profile.  This option is only
useful to distribution developers.

@end table

In addition to these actions @command{guix package} supports the
following options to query the current state of a profile, or the
availability of packages:

@table @option

@item --search=@var{regexp}
@itemx -s @var{regexp}
List the available packages whose synopsis or description matches
@var{regexp}.  Print all the meta-data of matching packages in
@code{recutils} format (@pxref{Top, GNU recutils databases,, recutils,
GNU recutils manual}).

This allows specific fields to be extracted using the @command{recsel}
command, for instance:

@example
$ guix package -s malloc | recsel -p name,version
name: glibc
version: 2.17

name: libgc
version: 7.2alpha6
@end example

@item --list-installed[=@var{regexp}]
@itemx -I [@var{regexp}]
List currently installed packages in the specified profile.  When
@var{regexp} is specified, list only installed packages whose name
matches @var{regexp}.

For each installed package, print the following items, separated by
tabs: the package name, its version string, the part of the package that
is installed (for instance, @code{out} for the default output,
@code{include} for its headers, etc.), and the path of this package in
the store.

@item --list-available[=@var{regexp}]
@itemx -A [@var{regexp}]
List packages currently available in the software distribution
(@pxref{GNU Distribution}).  When @var{regexp} is specified, list only
installed packages whose name matches @var{regexp}.

For each package, print the following items separated by tabs: its name,
its version string, the parts of the package (@pxref{Packages with
Multiple Outputs}), and the source location of its definition.

@end table

@node Packages with Multiple Outputs
@section Packages with Multiple Outputs

@cindex multiple-output packages
@cindex package outputs

Often, packages defined in Guix have a single @dfn{output}---i.e., the
source package leads exactly one directory in the store.  When running
@command{guix package -i glibc}, one installs the default output of the
GNU libc package; the default output is called @code{out}, but its name
can be omitted as shown in this command.  In this particular case, the
default output of @code{glibc} contains all the C header files, shared
libraries, static libraries, Info documentation, and other supporting
files.

Sometimes it is more appropriate to separate the various types of files
produced from a single source package into separate outputs.  For
instance, the GLib C library (used by GTK+ and related packages)
installs more than 20 MiB of reference documentation as HTML pages.
To save space for users who do not need it, the documentation goes to a
separate output, called @code{doc}.  To install the main GLib output,
which contains everything but the documentation, one would run:

@example
guix package -i glib
@end example

The command to install its documentation is:

@example
guix package -i glib:doc
@end example

Some packages install programs with different ``dependency footprints''.
For instance, the WordNet package install both command-line tools and
graphical user interfaces (GUIs).  The former depend solely on the C
library, whereas the latter depend on Tcl/Tk and the underlying X
libraries.  In this case, we leave the command-line tools in the default
output, whereas the GUIs are in a separate output.  This allows users
who do not need the GUIs to save space.

There are several such multiple-output packages in the GNU distribution.
Other conventional output names include @code{lib} for libraries and
possibly header files, @code{bin} for stand-alone programs, and
@code{debug} for debugging information (@pxref{Installing Debugging
Files}).  The outputs of a packages are listed in the third column of
the output of @command{guix package --list-available} (@pxref{Invoking
guix package}).


@node Invoking guix gc
@section Invoking @command{guix gc}

@cindex garbage collector
Packages that are installed but not used may be @dfn{garbage-collected}.
The @command{guix gc} command allows users to explicitly run the garbage
collector to reclaim space from the @file{/nix/store} directory.

The garbage collector has a set of known @dfn{roots}: any file under
@file{/nix/store} reachable from a root is considered @dfn{live} and
cannot be deleted; any other file is considered @dfn{dead} and may be
deleted.  The set of garbage collector roots includes default user
profiles, and may be augmented with @command{guix build --root}, for
example (@pxref{Invoking guix build}).

The @command{guix gc} command has three modes of operation: it can be
used to garbage-collect any dead files (the default), to delete specific
files (the @code{--delete} option), or to print garbage-collector
information.  The available options are listed below:

@table @code
@item --collect-garbage[=@var{min}]
@itemx -C [@var{min}]
Collect garbage---i.e., unreachable @file{/nix/store} files and
sub-directories.  This is the default operation when no option is
specified.

When @var{min} is given, stop once @var{min} bytes have been collected.
@var{min} may be a number of bytes, or it may include a unit as a
suffix, such as @code{MiB} for mebibytes and @code{GB} for gigabytes.

When @var{min} is omitted, collect all the garbage.

@item --delete
@itemx -d
Attempt to delete all the store files and directories specified as
arguments.  This fails if some of the files are not in the store, or if
they are still live.

@item --list-dead
Show the list of dead files and directories still present in the
store---i.e., files and directories no longer reachable from any root.

@item --list-live
Show the list of live store files and directories.

@end table

In addition, the references among existing store files can be queried:

@table @code

@item --references
@itemx --referrers
List the references (respectively, the referrers) of store files given
as arguments.

@item --requisites
@itemx -R
List the requisites of the store files passed as arguments.  Requisites
include the store files themselves, their references, and the references
of these, recursively.  In other words, the returned list is the
@dfn{transitive closure} of the store files.

@end table


@node Invoking guix pull
@section Invoking @command{guix pull}

Packages are installed or upgraded to the latest version available in
the distribution currently available on your local machine.  To update
that distribution, along with the Guix tools, you must run @command{guix
pull}: the command downloads the latest Guix source code and package
descriptions, and deploys it.

On completion, @command{guix package} will use packages and package
versions from this just-retrieved copy of Guix.  Not only that, but all
the Guix commands and Scheme modules will also be taken from that latest
version.  New @command{guix} sub-commands added by the update also
become available.

The @command{guix pull} command is usually invoked with no arguments,
but it supports the following options:

@table @code
@item --verbose
Produce verbose output, writing build logs to the standard error output.

@item --bootstrap
Use the bootstrap Guile to build the latest Guix.  This option is only
useful to Guix developers.
@end table

@c *********************************************************************
@node Programming Interface
@chapter Programming Interface

GNU Guix provides several Scheme programming interfaces (APIs) to
define, build, and query packages.  The first interface allows users to
write high-level package definitions.  These definitions refer to
familiar packaging concepts, such as the name and version of a package,
its build system, and its dependencies.  These definitions can then be
turned into concrete build actions.

Build actions are performed by the Guix daemon, on behalf of users.  In a
standard setup, the daemon has write access to the store---the
@file{/nix/store} directory---whereas users do not.  The recommended
setup also has the daemon perform builds in chroots, under a specific
build users, to minimize interference with the rest of the system.

@cindex derivation
Lower-level APIs are available to interact with the daemon and the
store.  To instruct the daemon to perform a build action, users actually
provide it with a @dfn{derivation}.  A derivation is a low-level
representation of the build actions to be taken, and the environment in
which they should occur---derivations are to package definitions what
assembly is to C programs.

This chapter describes all these APIs in turn, starting from high-level
package definitions.

@menu
* Defining Packages::   Defining new packages.
* The Store::           Manipulating the package store.
* Derivations::         Low-level interface to package derivations.
@end menu

@node Defining Packages
@section Defining Packages

The high-level interface to package definitions is implemented in the
@code{(guix packages)} and @code{(guix build-system)} modules.  As an
example, the package definition, or @dfn{recipe}, for the GNU Hello
package looks like this:

@example
(use-modules (guix packages)
             (guix download)
             (guix build-system gnu)
             (guix licenses))

(define hello
  (package
    (name "hello")
    (version "2.8")
    (source (origin
             (method url-fetch)
             (uri (string-append "mirror://gnu/hello/hello-" version
                                 ".tar.gz"))
             (sha256
              (base32 "0wqd8sjmxfskrflaxywc7gqw7sfawrfvdxd9skxawzfgyy0pzdz6"))))
    (build-system gnu-build-system)
    (inputs `(("gawk" ,gawk)))
    (synopsis "GNU Hello")
    (description "Yeah...")
    (home-page "http://www.gnu.org/software/hello/")
    (license gpl3+)))
@end example

@noindent
Without being a Scheme expert, the reader may have guessed the meaning
of the various fields here.  This expression binds variable @var{hello}
to a @code{<package>} object, which is essentially a record
(@pxref{SRFI-9, Scheme records,, guile, GNU Guile Reference Manual}).
This package object can be inspected using procedures found in the
@code{(guix packages)} module; for instance, @code{(package-name hello)}
returns---surprise!---@code{"hello"}.

There are a few points worth noting in the above package definition:

@itemize
@item
The @code{source} field of the package is an @code{<origin>} object.
Here, the @code{url-fetch} method from @code{(guix download)} is used,
meaning that the source is a file to be downloaded over FTP or HTTP.

The @code{mirror://gnu} prefix instructs @code{url-fetch} to use one of
the GNU mirrors defined in @code{(guix download)}.

The @code{sha256} field specifies the expected SHA256 hash of the file
being downloaded.  It is mandatory, and allows Guix to check the
integrity of the file.  The @code{(base32 @dots{})} form introduces the
base32 representation of the hash.  You can obtain this information with
@code{guix download} (@pxref{Invoking guix download}) and @code{guix
hash} (@pxref{Invoking guix hash}).

@item
@cindex GNU Build System
The @code{build-system} field is set to @var{gnu-build-system}.  The
@var{gnu-build-system} variable is defined in the @code{(guix
build-system gnu)} module, and is bound to a @code{<build-system>}
object.

Naturally, @var{gnu-build-system} represents the familiar GNU Build
System, and variants thereof (@pxref{Configuration, configuration and
makefile conventions,, standards, GNU Coding Standards}).  In a
nutshell, packages using the GNU Build System may be configured, built,
and installed with the usual @code{./configure && make && make check &&
make install} command sequence.  This is what @var{gnu-build-system}
does.

In addition, @var{gnu-build-system} ensures that the ``standard''
environment for GNU packages is available.  This includes tools such as
GCC, Coreutils, Bash, Make, Diffutils, and Patch.

@item
The @code{inputs} field specifies inputs to the build process---i.e.,
build-time or run-time dependencies of the package.  Here, we define an
input called @code{"gawk"} whose value is that of the @var{gawk}
variable; @var{gawk} is itself bound to a @code{<package>} object.

Note that GCC, Coreutils, Bash, and other essential tools do not need to
be specified as inputs here.  Instead, @var{gnu-build-system} takes care
of ensuring that they are present.

However, any other dependencies need to be specified in the
@code{inputs} field.  Any dependency not specified here will simply be
unavailable to the build process, possibly leading to a build failure.
@end itemize

There are other fields that package definitions may provide.  Of
particular interest is the @code{arguments} field.  When specified, it
must be bound to a list of additional arguments to be passed to the
build system.  For instance, the above definition could be augmented
with the following field initializer:

@example
    (arguments `(#:tests? #f
                 #:configure-flags '("--enable-silent-rules")))
@end example

@noindent
These are keyword arguments (@pxref{Optional Arguments, keyword
arguments in Guile,, guile, GNU Guile Reference Manual}).  They are
passed to @var{gnu-build-system}, which interprets them as meaning ``do
not run @code{make check}'', and ``run @file{configure} with the
@code{--enable-silent-rules} flag''.  The value of these keyword
parameters is actually evaluated in the @dfn{build stratum}---i.e., by a
Guile process launched by the daemon (@pxref{Derivations}).

Once a package definition is in place@footnote{Simple package
definitions like the one above may be automatically converted from the
Nixpkgs distribution using the @command{guix import} command.}, the
package may actually be built using the @code{guix build} command-line
tool (@pxref{Invoking guix build}).  Eventually, updating the package
definition to a new upstream version can be partly automated by the
@command{guix refresh} command (@pxref{Invoking guix refresh}).

Behind the scenes, a derivation corresponding to the @code{<package>}
object is first computed by the @code{package-derivation} procedure.
That derivation is stored in a @code{.drv} file under @file{/nix/store}.
The build actions it prescribes may then be realized by using the
@code{build-derivations} procedure (@pxref{The Store}).

@deffn {Scheme Procedure} package-derivation @var{store} @var{package} [@var{system}]
Return the derivation path and corresponding @code{<derivation>} object
of @var{package} for @var{system} (@pxref{Derivations}).

@var{package} must be a valid @code{<package>} object, and @var{system}
must be a string denoting the target system type---e.g.,
@code{"x86_64-linux"} for an x86_64 Linux-based GNU system.  @var{store}
must be a connection to the daemon, which operates on the store
(@pxref{The Store}).
@end deffn

@noindent
@cindex cross-compilation
Similarly, it is possible to compute a derivation that cross-builds a
package for some other system:

@deffn {Scheme Procedure} package-cross-derivation @var{store} @
            @var{package} @var{target} [@var{system}]
Return the derivation path and corresponding @code{<derivation>} object
of @var{package} cross-built from @var{system} to @var{target}.

@var{target} must be a valid GNU triplet denoting the target hardware
and operating system, such as @code{"mips64el-linux-gnu"}
(@pxref{Configuration Names, GNU configuration triplets,, configure, GNU
Configure and Build System}).
@end deffn


@node The Store
@section The Store

@cindex store
@cindex store paths

Conceptually, the @dfn{store} is where derivations that have been
successfully built are stored---by default, under @file{/nix/store}.
Sub-directories in the store are referred to as @dfn{store paths}.  The
store has an associated database that contains information such has the
store paths referred to by each store path, and the list of @emph{valid}
store paths---paths that result from a successful build.

The store is always accessed by the daemon on behalf of its clients
(@pxref{Invoking guix-daemon}).  To manipulate the store, clients
connect to the daemon over a Unix-domain socket, send it requests, and
read the result---these are remote procedure calls, or RPCs.

The @code{(guix store)} module provides procedures to connect to the
daemon, and to perform RPCs.  These are described below.

@deffn {Scheme Procedure} open-connection [@var{file}] [#:reserve-space? #t]
Connect to the daemon over the Unix-domain socket at @var{file}.  When
@var{reserve-space?} is true, instruct it to reserve a little bit of
extra space on the file system so that the garbage collector can still
operate, should the disk become full.  Return a server object.

@var{file} defaults to @var{%default-socket-path}, which is the normal
location given the options that were passed to @command{configure}.
@end deffn

@deffn {Scheme Procedure} close-connection @var{server}
Close the connection to @var{server}.
@end deffn

@defvr {Scheme Variable} current-build-output-port
This variable is bound to a SRFI-39 parameter, which refers to the port
where build and error logs sent by the daemon should be written.
@end defvr

Procedures that make RPCs all take a server object as their first
argument.

@deffn {Scheme Procedure} valid-path? @var{server} @var{path}
Return @code{#t} when @var{path} is a valid store path.
@end deffn

@deffn {Scheme Procedure} add-text-to-store @var{server} @var{name} @var{text} [@var{references}]
Add @var{text} under file @var{name} in the store, and return its store
path.  @var{references} is the list of store paths referred to by the
resulting store path.
@end deffn

@deffn {Scheme Procedure} build-derivations @var{server} @var{derivations}
Build @var{derivations} (a list of derivation paths), and return when
the worker is done building them.  Return @code{#t} on success.
@end deffn

@c FIXME
@i{This section is currently incomplete.}

@node Derivations
@section Derivations

@cindex derivations
Low-level build actions and the environment in which they are performed
are represented by @dfn{derivations}.  A derivation contain the
following pieces of information:

@itemize
@item
The outputs of the derivation---derivations produce at least one file or
directory in the store, but may produce more.

@item
The inputs of the derivations, which may be other derivations or plain
files in the store (patches, build scripts, etc.)

@item
The system type targeted by the derivation---e.g., @code{x86_64-linux}.

@item
The file name of a build script in the store, along with the arguments
to be passed.

@item
A list of environment variables to be defined.

@end itemize

@cindex derivation path
Derivations allow clients of the daemon to communicate build actions to
the store.  They exist in two forms: as an in-memory representation,
both on the client- and daemon-side, and as files in the store whose
name end in @code{.drv}---these files are referred to as @dfn{derivation
paths}.  Derivations paths can be passed to the @code{build-derivations}
procedure to perform the build actions they prescribe (@pxref{The
Store}).

The @code{(guix derivations)} module provides a representation of
derivations as Scheme objects, along with procedures to create and
otherwise manipulate derivations.  The lowest-level primitive to create
a derivation is the @code{derivation} procedure:

@deffn {Scheme Procedure} derivation @var{store} @var{name} @var{builder} @var{args} [#:outputs '("out")] [#:hash #f] [#:hash-algo #f] [#:hash-mode #f] [#:inputs '()] [#:env-vars '()] [#:system (%current-system)] [#:references-graphs #f]
Build a derivation with the given arguments.  Return the resulting store
path and @code{<derivation>} object.

When @var{hash}, @var{hash-algo}, and @var{hash-mode} are given, a
@dfn{fixed-output derivation} is created---i.e., one whose result is
known in advance, such as a file download.

When @var{references-graphs} is true, it must be a list of file
name/store path pairs.  In that case, the reference graph of each store
path is exported in the build environment in the corresponding file, in
a simple text format.
@end deffn

@noindent
Here's an example with a shell script as its builder, assuming
@var{store} is an open connection to the daemon, and @var{bash} points
to a Bash executable in the store:

@lisp
(use-modules (guix utils)
             (guix store)
             (guix derivations))

(call-with-values
  (lambda ()
    (let ((builder   ; add the Bash script to the store
           (add-text-to-store store "my-builder.sh"
                              "echo hello world > $out\n" '())))
      (derivation store "foo"
                  bash `("-e" ,builder)
                  #:env-vars '(("HOME" . "/homeless")))))
  list)
@result{} ("/nix/store/@dots{}-foo.drv" #<<derivation> @dots{}>)
@end lisp

As can be guessed, this primitive is cumbersome to use directly.  An
improved variant is @code{build-expression->derivation}, which allows
the caller to directly pass a Guile expression as the build script:

@deffn {Scheme Procedure} build-expression->derivation @var{store} @var{name} @var{system} @var{exp} @var{inputs} [#:outputs '("out")] [#:hash #f] [#:hash-algo #f] [#:env-vars '()] [#:modules '()] [#:references-graphs #f] [#:guile-for-build #f]
Return a derivation that executes Scheme expression @var{exp} as a
builder for derivation @var{name}.  @var{inputs} must be a list of
@code{(name drv-path sub-drv)} tuples; when @var{sub-drv} is omitted,
@code{"out"} is assumed.  @var{modules} is a list of names of Guile
modules from the current search path to be copied in the store,
compiled, and made available in the load path during the execution of
@var{exp}---e.g., @code{((guix build utils) (guix build
gnu-build-system))}.

@var{exp} is evaluated in an environment where @code{%outputs} is bound
to a list of output/path pairs, and where @code{%build-inputs} is bound
to a list of string/output-path pairs made from @var{inputs}.
Optionally, @var{env-vars} is a list of string pairs specifying the name
and value of environment variables visible to the builder.  The builder
terminates by passing the result of @var{exp} to @code{exit}; thus, when
@var{exp} returns @code{#f}, the build is considered to have failed.

@var{exp} is built using @var{guile-for-build} (a derivation).  When
@var{guile-for-build} is omitted or is @code{#f}, the value of the
@code{%guile-for-build} fluid is used instead.

See the @code{derivation} procedure for the meaning of @var{references-graphs}.
@end deffn

@noindent
Here's an example of a single-output derivation that creates a directory
containing one file:

@lisp
(let ((builder '(let ((out (assoc-ref %outputs "out")))
                  (mkdir out)    ; create /nix/store/@dots{}-goo
                  (call-with-output-file (string-append out "/test")
                    (lambda (p)
                      (display '(hello guix) p))))))
  (build-expression->derivation store "goo" (%current-system)
                                builder '()))

@result{} "/nix/store/@dots{}-goo.drv"
@result{} #<<derivation> @dots{}>
@end lisp

@cindex strata of code
Remember that the build expression passed to
@code{build-expression->derivation} is run by a separate Guile process
than the one that calls @code{build-expression->derivation}: it is run
by a Guile process launched by the daemon, typically in a chroot.  So,
while there is a single language for both the @dfn{host} and the build
side, there are really two @dfn{strata} of code: the host-side, and the
build-side code@footnote{The term @dfn{stratum} in this context was
coined by Manuel Serrano et al. in the context of their work on Hop.}.
This distinction is important to keep in mind, notably when using
higher-level constructs such as @var{gnu-build-system} (@pxref{Defining
Packages}).  For this reason, Guix modules that are meant to be used in
the build stratum are kept in the @code{(guix build @dots{})} name
space.

@c *********************************************************************
@node Utilities
@chapter Utilities

This section describes tools primarily targeted at developers and users
who write new package definitions.  They complement the Scheme
programming interface of Guix in a convenient way.

@menu
* Invoking guix build::         Building packages from the command line.
* Invoking guix download::      Downloading a file and printing its hash.
* Invoking guix hash::          Computing the cryptographic hash of a file.
* Invoking guix refresh::       Updating package definitions.
@end menu

@node Invoking guix build
@section Invoking @command{guix build}

The @command{guix build} command builds packages or derivations and
their dependencies, and prints the resulting store paths.  Note that it
does not modify the user's profile---this is the job of the
@command{guix package} command (@pxref{Invoking guix package}).  Thus,
it is mainly useful for distribution developers.

The general syntax is:

@example
guix build @var{options} @var{package-or-derivation}@dots{}
@end example

@var{package-or-derivation} may be either the name of a package found in
the software distribution such as @code{coreutils} or
@code{coreutils-8.20}, or a derivation such as
@file{/nix/store/@dots{}-coreutils-8.19.drv}.  Alternatively, the
@code{--expression} option may be used to specify a Scheme expression
that evaluates to a package; this is useful when disambiguation among
several same-named packages or package variants is needed.

The @var{options} may be zero or more of the following:

@table @code

@item --expression=@var{expr}
@itemx -e @var{expr}
Build the package @var{expr} evaluates to.

For example, @var{expr} may be @code{(@@ (gnu packages guile)
guile-1.8)}, which unambiguously designates this specific variant of
version 1.8 of Guile.

@item --source
@itemx -S
Build the packages' source derivations, rather than the packages
themselves.

For instance, @code{guix build -S gcc} returns something like
@file{/nix/store/@dots{}-gcc-4.7.2.tar.bz2}, which is GCC's source tarball.

@item --system=@var{system}
@itemx -s @var{system}
Attempt to build for @var{system}---e.g., @code{i686-linux}---instead of
the host's system type.

An example use of this is on Linux-based systems, which can emulate
different personalities.  For instance, passing
@code{--system=i686-linux} on an @code{x86_64-linux} system allows users
to build packages in a complete 32-bit environment.

@item --target=@var{triplet}
@cindex cross-compilation
Cross-build for @var{triplet}, which must be a valid GNU triplet, such
as @code{"mips64el-linux-gnu"} (@pxref{Configuration Names, GNU
configuration triplets,, configure, GNU Configure and Build System}).

@item --derivations
@itemx -d
Return the derivation paths, not the output paths, of the given
packages.

@item --keep-failed
@itemx -K
Keep the build tree of failed builds.  Thus, if a build fail, its build
tree is kept under @file{/tmp}, in a directory whose name is shown at
the end of the build log.  This is useful when debugging build issues.

@item --dry-run
@itemx -n
Do not build the derivations.

@item --fallback
When substituting a pre-built binary fails, fall back to building
packages locally.

@item --no-substitutes
Build instead of resorting to pre-built substitutes.

@item --max-silent-time=@var{seconds}
When the build or substitution process remains silent for more than
@var{seconds}, terminate it and report a build failure.

@item --cores=@var{n}
@itemx -c @var{n}
Allow the use of up to @var{n} CPU cores for the build.  The special
value @code{0} means to use as many CPU cores as available.

@item --root=@var{file}
@itemx -r @var{file}
Make @var{file} a symlink to the result, and register it as a garbage
collector root.

@item --verbosity=@var{level}
Use the given verbosity level.  @var{level} must be an integer between 0
and 5; higher means more verbose output.  Setting a level of 4 or more
may be helpful when debugging setup issues with the build daemon.

@end table

Behind the scenes, @command{guix build} is essentially an interface to
the @code{package-derivation} procedure of the @code{(guix packages)}
module, and to the @code{build-derivations} procedure of the @code{(guix
store)} module.

@node Invoking guix download
@section Invoking @command{guix download}

When writing a package definition, developers typically need to download
the package's source tarball, compute its SHA256 hash, and write that
hash in the package definition (@pxref{Defining Packages}).  The
@command{guix download} tool helps with this task: it downloads a file
from the given URI, adds it to the store, and prints both its file name
in the store and its SHA256 hash.

The fact that the downloaded file is added to the store saves bandwidth:
when the developer eventually tries to build the newly defined package
with @command{guix build}, the source tarball will not have to be
downloaded again because it is already in the store.  It is also a
convenient way to temporarily stash files, which may be deleted
eventually (@pxref{Invoking guix gc}).

The @command{guix download} command supports the same URIs as used in
package definitions.  In particular, it supports @code{mirror://} URIs.
@code{https} URIs (HTTP over TLS) are supported @emph{provided} the
Guile bindings for GnuTLS are available in the user's environment; when
they are not available, an error is raised.

The following option is available:

@table @code
@item --format=@var{fmt}
@itemx -f @var{fmt}
Write the hash in the format specified by @var{fmt}.  For more
information on the valid values for @var{fmt}, @ref{Invoking guix hash}.
@end table

@node Invoking guix hash
@section Invoking @command{guix hash}

The @command{guix hash} command computes the SHA256 hash of a file.
It is primarily a convenience tool for anyone contributing to the
distribution: it computes the cryptographic hash of a file, which can be
used in the definition of a package (@pxref{Defining Packages}).

The general syntax is:

@example
guix hash @var{option} @var{file}
@end example

@command{guix hash} has the following option:

@table @code

@item --format=@var{fmt}
@itemx -f @var{fmt}
Write the hash in the format specified by @var{fmt}.

Supported formats: @code{nix-base32}, @code{base32}, @code{base16}
(@code{hex} and @code{hexadecimal} can be used as well).

If the @option{--format} option is not specified, @command{guix hash}
will output the hash in @code{nix-base32}.  This representation is used
in the definitions of packages.

@end table

@node Invoking guix refresh
@section Invoking @command{guix refresh}

The primary audience of the @command{guix refresh} command is developers
of the GNU software distribution.  By default, it reports any packages
provided by the distribution that are outdated compared to the latest
upstream version, like this:

@example
$ guix refresh
gnu/packages/gettext.scm:29:13: gettext would be upgraded from 0.18.1.1 to 0.18.2.1
gnu/packages/glib.scm:77:12: glib would be upgraded from 2.34.3 to 2.37.0
@end example

It does so by browsing each package's FTP directory and determining the
highest version number of the source tarballs
therein@footnote{Currently, this only works for GNU packages.}.

When passed @code{--update}, it modifies distribution source files to
update the version numbers and source tarball hashes of those packages'
recipes (@pxref{Defining Packages}).  This is achieved by downloading
each package's latest source tarball and its associated OpenPGP
signature, authenticating the downloaded tarball against its signature
using @command{gpg}, and finally computing its hash.  When the public
key used to sign the tarball is missing from the user's keyring, an
attempt is made to automatically retrieve it from a public key server;
when it's successful, the key is added to the user's keyring; otherwise,
@command{guix refresh} reports an error.

The following options are supported:

@table @code

@item --update
@itemx -u
Update distribution source files (package recipes) in place.
@ref{Defining Packages}, for more information on package definitions.

@item --select=[@var{subset}]
@itemx -s @var{subset}
Select all the packages in @var{subset}, one of @code{core} or
@code{non-core}.

The @code{core} subset refers to all the packages at the core of the
distribution---i.e., packages that are used to build ``everything
else''.  This includes GCC, libc, Binutils, Bash, etc.  Usually,
changing one of these packages in the distribution entails a rebuild of
all the others.  Thus, such updates are an inconvenience to users in
terms of build time or bandwidth used to achieve the upgrade.

The @code{non-core} subset refers to the remaining packages.  It is
typically useful in cases where an update of the core packages would be
inconvenient.

@end table

In addition, @command{guix refresh} can be passed one or more package
names, as in this example:

@example
guix refresh -u emacs idutils
@end example

@noindent
The command above specifically updates the @code{emacs} and
@code{idutils} packages.  The @code{--select} option would have no
effect in this case.

The following options can be used to customize GnuPG operation:

@table @code

@item --key-server=@var{host}
Use @var{host} as the OpenPGP key server when importing a public key.

@item --gpg=@var{command}
Use @var{command} as the GnuPG 2.x command.  @var{command} is searched
for in @code{$PATH}.

@end table


@c *********************************************************************
@node GNU Distribution
@chapter GNU Distribution

Guix comes with a distribution of free software@footnote{The term
``free'' here refers to the
@url{http://www.gnu.org/philosophy/free-sw.html,freedom provided to
users of that software}.}  that form the basis of the GNU system.  This
includes core GNU packages such as GNU libc, GCC, and Binutils, as well
as many GNU and non-GNU applications.  The complete list of available
packages can be seen by running @command{guix package} (@pxref{Invoking
guix package}):

@example
guix package --list-available
@end example

Our goal is to build a practical 100% free software distribution of
Linux-based and other variants of GNU, with a focus on the promotion and
tight integration of GNU components, and an emphasis on programs and
tools that help users exert that freedom.

@menu
* Installing Debugging Files::  Feeding the debugger.
* Package Modules::             Packages from the programmer's viewpoint.
* Packaging Guidelines::        Growing the distribution.
* Bootstrapping::               GNU/Linux built from scratch.
* Porting::                     Targeting another platform or kernel.
@end menu

Building this distribution is a cooperative effort, and you are invited
to join!  @ref{Contributing}, for information about how you can help.


@node Installing Debugging Files
@section Installing Debugging Files

Program binaries, as produced by the GCC compilers for instance, are
typically written in the ELF format, with a section containing
@dfn{debugging information}.  Debugging information is what allows the
debugger, GDB, to map binary code to source code; it is required to
debug a compiled program in good conditions.

The problem with debugging information is that is takes up a fair amount
of disk space.  For example, debugging information for the GNU C Library
weighs in at more than 60 MiB.  Thus, as a user, keeping all the
debugging info of all the installed programs is usually not an option.
Yet, space savings should not come at the cost of an impediment to
debugging---especially in the GNU system, which should make it easier
for users to exert their computing freedom (@pxref{GNU Distribution}).

Thankfully, the GNU Binary Utilities (Binutils) and GDB provide a
mechanism that allows users to get the best of both worlds: debugging
information can be stripped from the binaries and stored in separate
files.  GDB is then able to load debugging information from those files,
when they are available (@pxref{Separate Debug Files,,, gdb, Debugging
with GDB}).

The GNU distribution takes advantage of this by storing debugging
information in the @code{lib/debug} sub-directory of a separate package
output unimaginatively called @code{debug} (@pxref{Packages with
Multiple Outputs}).  Users can choose to install the @code{debug} output
of a package when they need it.  For instance, the following command
installs the debugging information for the GNU C Library and for GNU
Guile:

@example
guix package -i glibc:debug -i guile:debug
@end example

GDB must then be told to look for debug files in the user's profile, by
setting the @code{debug-file-directory} variable (consider setting it
from the @file{~/.gdbinit} file, @pxref{Startup,,, gdb, Debugging with
GDB}):

@example
(gdb) set debug-file-directory ~/.guix-profile/lib/debug
@end example

From there on, GDB will pick up debugging information from the
@code{.debug} files under @file{~/.guix-profile/lib/debug}.

@c XXX: keep me up-to-date
The @code{debug} output mechanism in Guix is implemented by the
@code{gnu-build-system} (@pxref{Defining Packages}).  Currently, it is
opt-in---debugging information is available only for those packages
whose definition explicitly declares a @code{debug} output.  This may be
changed to opt-out in the future, if our build farm servers can handle
the load.  To check whether a package has a @code{debug} output, use
@command{guix package --list-available} (@pxref{Invoking guix package}).


@node Package Modules
@section Package Modules

From a programming viewpoint, the package definitions of the
distribution are provided by Guile modules in the @code{(gnu packages
...)} name space (@pxref{Modules, Guile modules,, guile, GNU Guile
Reference Manual}).  For instance, the @code{(gnu packages emacs)}
module exports a variable named @code{emacs}, which is bound to a
@code{<package>} object (@pxref{Defining Packages}).  The @code{(gnu
packages)} module provides facilities for searching for packages.

The distribution is fully @dfn{bootstrapped} and @dfn{self-contained}:
each package is built based solely on other packages in the
distribution.  The root of this dependency graph is a small set of
@dfn{bootstrap binaries}, provided by the @code{(gnu packages
bootstrap)} module.  For more information on bootstrapping,
@ref{Bootstrapping}.

@node Packaging Guidelines
@section Packaging Guidelines

The GNU distribution is nascent and may well lack some of your favorite
packages.  This section describes how you can help make the distribution
grow.  @xref{Contributing}, for additional information on how you can
help.

Free software packages are usually distributed in the form of
@dfn{source code tarballs}---typically @file{tar.gz} files that contain
all the source files.  Adding a package to the distribution means
essentially two things: adding a @dfn{recipe} that describes how to
build the package, including a list of other packages required to build
it, and adding @dfn{package meta-data} along with that recipe, such as a
description and licensing information.

In Guix all this information is embodied in @dfn{package definitions}.
Package definitions provide a high-level view of the package.  They are
written using the syntax of the Scheme programming language; in fact,
for each package we define a variable bound to the package definition,
and export that variable from a module (@pxref{Package Modules}).
However, in-depth Scheme knowledge is @emph{not} a prerequisite for
creating packages.  For more information on package definitions,
@ref{Defining Packages}.

Once a package definition is in place, stored in a file in the Guix
source tree, it can be tested using the @command{guix build} command
(@pxref{Invoking guix build}).  For example, assuming the new package is
called @code{gnew}, you may run this command from the Guix build tree:

@example
./pre-inst-env guix build gnew --keep-failed
@end example

Using @code{--keep-failed} makes it easier to debug build failures since
it provides access to the failed build tree.

Once your package builds correctly, please send us a patch
(@pxref{Contributing}).  Well, if you need help, we will be happy to
help you too.  Once the patch is committed in the Guix repository, the
new package automatically gets built on the supported platforms by
@url{http://hydra.gnu.org/gnu/master, our continuous integration
system}.

@cindex substituter
Users can obtain the new package definition simply by running
@command{guix pull} (@pxref{Invoking guix pull}).  When
@code{hydra.gnu.org} is done building the package, installing the
package automatically downloads binaries from there (except when using
@code{--no-substitutes}).  The only place where human intervention is
needed is to review and apply the patch.


@menu
* Software Freedom::     What may go into the distribution.
* Package Naming::       What's in a name?
* Version Numbers::      When the name is not enough.
* Python Modules::       Taming the snake.
@end menu

@node Software Freedom
@subsection Software Freedom

@c Adapted from http://www.gnu.org/philosophy/philosophy.html.

The GNU operating system has been developed so that users can have
freedom in their computing.  GNU is @dfn{free software}, meaning that
users have the @url{http://www.gnu.org/philosophy/free-sw.html,four
essential freedoms}: to run the program, to study and change the program
in source code form, to redistribute exact copies, and to distribute
modified versions.  Packages found in the GNU distribution provide only
software that conveys these four freedoms.

In addition, the GNU distribution follow the
@url{http://www.gnu.org/distros/free-system-distribution-guidelines.html,free
software distribution guidelines}.  Among other things, these guidelines
reject non-free firmware, recommendations of non-free software, and
discuss ways to deal with trademarks and patents.


@node Package Naming
@subsection Package Naming

A package has actually two names associated with it:
First, there is the name of the @emph{Scheme variable}, the one following
@code{define-public}.  By this name, the package can be made known in the
Scheme code, for instance as input to another package.  Second, there is
the string in the @code{name} field of a package definition.  This name
is used by package management commands such as
@command{guix package} and @command{guix build}.

Both are usually the same and correspond to the lowercase conversion of the
project name chosen upstream.  For instance, the GNUnet project is packaged
as @code{gnunet}.  We do not add @code{lib} prefixes for library packages,
unless these are already part of the official project name.  But see
@ref{Python Modules} for special rules concerning modules for
the Python language.


@node Version Numbers
@subsection Version Numbers

We usually package only the latest version of a given free software
project.  But sometimes, for instance for incompatible library versions,
two (or more) versions of the same package are needed.  These require
different Scheme variable names.  We use the name as defined
in @ref{Package Naming}
for the most recent version; previous versions use the same name, suffixed
by @code{-} and the smallest prefix of the version number that may
distinguish the two versions.

The name inside the package definition is the same for all versions of a
package and does not contain any version number.

For instance, the versions 2.24.20 and 3.9.12 of GTK+ may be packaged as follows:

@example
(define-public gtk+
  (package
   (name "gtk+")
   (version "3.9.12")
   ...))
(define-public gtk+-2
  (package
   (name "gtk+")
   (version "2.24.20")
   ...))
@end example
If we also wanted GTK+ 3.8.2, this would be packaged as
@example
(define-public gtk+-3.8
  (package
   (name "gtk+")
   (version "3.8.2")
   ...))
@end example


@node Python Modules
@subsection Python Modules

We currently package Python 2 and Python 3, under the Scheme variable names
@code{python-2} and @code{python} as explained in @ref{Version Numbers}.
To avoid confusion and naming clashes with other programming languages, it
seems desirable that the name of a package for a Python module contains
the word @code{python}.

Some modules are compatible with only one version of Python, others with both.
If the package Foo compiles only with Python 3, we name it
@code{python-foo}; if it compiles only with Python 2, we name it
@code{python2-foo}. If it is compatible with both versions, we create two
packages with the corresponding names.

If a project already contains the word @code{python}, we drop this;
for instance, the module python-dateutil is packaged under the names
@code{python-dateutil} and @code{python2-dateutil}.





@node Bootstrapping
@section Bootstrapping

@c Adapted from the ELS 2013 paper.

@cindex bootstrapping

Bootstrapping in our context refers to how the distribution gets built
``from nothing''.  Remember that the build environment of a derivation
contains nothing but its declared inputs (@pxref{Introduction}).  So
there's an obvious chicken-and-egg problem: how does the first package
get built?  How does the first compiler get compiled?  Note that this is
a question of interest only to the curious hacker, not to the regular
user, so you can shamelessly skip this section if you consider yourself
a ``regular user''.

@cindex bootstrap binaries
The GNU system is primarily made of C code, with libc at its core.  The
GNU build system itself assumes the availability of a Bourne shell and
command-line tools provided by GNU Coreutils, Awk, Findutils, `sed', and
`grep'.  Furthermore, build programs---programs that run
@code{./configure}, @code{make}, etc.---are written in Guile Scheme
(@pxref{Derivations}).  Consequently, to be able to build anything at
all, from scratch, Guix relies on pre-built binaries of Guile, GCC,
Binutils, libc, and the other packages mentioned above---the
@dfn{bootstrap binaries}.

These bootstrap binaries are ``taken for granted'', though we can also
re-create them if needed (more on that later.)

@unnumberedsubsec Preparing to Use the Bootstrap Binaries

@c As of Emacs 24.3, Info-mode displays the image, but since it's a
@c large image, it's hard to scroll.  Oh well.
@image{images/bootstrap-graph,6in,,Dependency graph of the early bootstrap derivations}

The figure above shows the very beginning of the dependency graph of the
distribution, corresponding to the package definitions of the @code{(gnu
packages bootstrap)} module.  At this level of detail, things are
slightly complex.  First, Guile itself consists of an ELF executable,
along with many source and compiled Scheme files that are dynamically
loaded when it runs.  This gets stored in the @file{guile-2.0.7.tar.xz}
tarball shown in this graph.  This tarball is part of Guix's ``source''
distribution, and gets inserted into the store with @code{add-to-store}
(@pxref{The Store}).

But how do we write a derivation that unpacks this tarball and adds it
to the store?  To solve this problem, the @code{guile-bootstrap-2.0.drv}
derivation---the first one that gets built---uses @code{bash} as its
builder, which runs @code{build-bootstrap-guile.sh}, which in turn calls
@code{tar} to unpack the tarball.  Thus, @file{bash}, @file{tar},
@file{xz}, and @file{mkdir} are statically-linked binaries, also part of
the Guix source distribution, whose sole purpose is to allow the Guile
tarball to be unpacked.

Once @code{guile-bootstrap-2.0.drv} is built, we have a functioning
Guile that can be used to run subsequent build programs.  Its first task
is to download tarballs containing the other pre-built binaries---this
is what the @code{.tar.xz.drv} derivations do.  Guix modules such as
@code{ftp-client.scm} are used for this purpose.  The
@code{module-import.drv} derivations import those modules in a directory
in the store, using the original layout.  The
@code{module-import-compiled.drv} derivations compile those modules, and
write them in an output directory with the right layout.  This
corresponds to the @code{#:modules} argument of
@code{build-expression->derivation} (@pxref{Derivations}).

Finally, the various tarballs are unpacked by the
derivations @code{gcc-bootstrap-0.drv}, @code{glibc-bootstrap-0.drv},
etc., at which point we have a working C tool chain.


@unnumberedsubsec Building the Build Tools

@c TODO: Add a package-level dependency graph generated from (gnu
@c packages base).

Bootstrapping is complete when we have a full tool chain that does not
depend on the pre-built bootstrap tools discussed above.  This
no-dependency requirement is verified by checking whether the files of
the final tool chain contain references to the @file{/nix/store}
directories of the bootstrap inputs.  The process that leads to this
``final'' tool chain is described by the package definitions found in
the @code{(gnu packages base)} module.

@c See <http://lists.gnu.org/archive/html/gnu-system-discuss/2012-10/msg00000.html>.
The first tool that gets built with the bootstrap binaries is
GNU Make, which is a prerequisite for all the following packages.
From there Findutils and Diffutils get built.

Then come the first-stage Binutils and GCC, built as pseudo cross
tools---i.e., with @code{--target} equal to @code{--host}.  They are
used to build libc.  Thanks to this cross-build trick, this libc is
guaranteed not to hold any reference to the initial tool chain.

From there the final Binutils and GCC are built.  GCC uses @code{ld}
from the final Binutils, and links programs against the just-built libc.
This tool chain is used to build the other packages used by Guix and by
the GNU Build System: Guile, Bash, Coreutils, etc.

And voilà!  At this point we have the complete set of build tools that
the GNU Build System expects.  These are in the @code{%final-inputs}
variables of the @code{(gnu packages base)} module, and are implicitly
used by any package that uses @code{gnu-build-system} (@pxref{Defining
Packages}).


@unnumberedsubsec Building the Bootstrap Binaries

Because the final tool chain does not depend on the bootstrap binaries,
those rarely need to be updated.  Nevertheless, it is useful to have an
automated way to produce them, should an update occur, and this is what
the @code{(gnu packages make-bootstrap)} module provides.

The following command builds the tarballs containing the bootstrap
binaries (Guile, Binutils, GCC, libc, and a tarball containing a mixture
of Coreutils and other basic command-line tools):

@example
guix build bootstrap-tarballs
@end example

The generated tarballs are those that should be referred to in the
@code{(gnu packages bootstrap)} module mentioned at the beginning of
this section.

Still here?  Then perhaps by now you've started to wonder: when do we
reach a fixed point?  That is an interesting question!  The answer is
unknown, but if you would like to investigate further (and have
significant computational and storage resources to do so), then let us
know.

@node Porting
@section Porting to a New Platform

As discussed above, the GNU distribution is self-contained, and
self-containment is achieved by relying on pre-built ``bootstrap
binaries'' (@pxref{Bootstrapping}).  These binaries are specific to an
operating system kernel, CPU architecture, and application binary
interface (ABI).  Thus, to port the distribution to a platform that is
not yet supported, one must build those bootstrap binaries, and update
the @code{(gnu packages bootstrap)} module to use them on that platform.

Fortunately, Guix can @emph{cross compile} those bootstrap binaries.
When everything goes well, and assuming the GNU tool chain supports the
target platform, this can be as simple as running a command like this
one:

@example
guix build --target=armv5tel-linux-gnueabi bootstrap-tarballs
@end example

In practice, there may be some complications.  First, it may be that the
extended GNU triplet that specifies an ABI (like the @code{eabi} suffix
above) is not recognized by all the GNU tools.  Typically, glibc
recognizes some of these, whereas GCC uses an extra @code{--with-abi}
configure flag (see @code{gcc.scm} for examples of how to handle this.)
Second, some of the required packages could fail to build for that
platform.  Lastly, the generated binaries could be broken for some
reason.


@c *********************************************************************
@node Contributing
@chapter Contributing

This project is a cooperative effort, and we need your help to make it
grow!  Please get in touch with us on @email{guix-devel@@gnu.org}.  We
welcome ideas, bug reports, patches, and anything that may be helpful to
the project.  We particularly welcome help on packaging
(@pxref{Packaging Guidelines}).

Please see the
@url{http://git.savannah.gnu.org/cgit/guix.git/tree/HACKING,
@file{HACKING} file} that comes with the Guix source code for practical
details about contributions.


@c *********************************************************************
@node Acknowledgments
@chapter Acknowledgments

Guix is based on the Nix package manager, which was designed and
implemented by Eelco Dolstra.  Nix pioneered functional package
management, and promoted unprecedented features, such as transactional
package upgrades and rollbacks, per-user profiles, and referentially
transparent build processes.  Without this work, Guix would not exist.

The Nix-based software distributions, Nixpkgs and NixOS, have also been
an inspiration for Guix.

@c *********************************************************************
@node GNU Free Documentation License
@appendix GNU Free Documentation License

@include fdl-1.3.texi

@c *********************************************************************
@node Concept Index
@unnumbered Concept Index
@printindex cp

@node Function Index
@unnumbered Function Index
@printindex fn

@bye

@c Local Variables:
@c ispell-local-dictionary: "american";
@c End: