;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2012, 2013, 2014, 2015, 2016, 2017 Ludovic Courtès ;;; Copyright © 2013 Cyril Roelandt ;;; Copyright © 2014, 2015, 2016 Mark H Weaver ;;; Copyright © 2014, 2015, 2016 Eric Bavier ;;; Copyright © 2015, 2016 Taylan Ulrich Bayırlı/Kammer ;;; Copyright © 2015 Alex Sassmannshausen ;;; Copyright © 2015 Eric Dvorsak ;;; Copyright © 2016 Leo Famulari ;;; Copyright © 2016 Pjotr Prins ;;; Copyright © 2016 Ricardo Wurmus ;;; Copyright © 2016, 2017 Efraim Flashner ;;; Copyright © 2016 Peter Feigl ;;; Copyright © 2016 John J. Foerch ;;; Coypright © 2016 ng0 ;;; Coypright © 2016 Tobias Geerinckx-Rice ;;; Coypright © 2016 John Darrington ;;; ;;; This file is part of GNU Guix. ;;; ;;; GNU Guix is free software; you can redistribute it and/or modify it ;;; under the terms of the GNU General Public License as published by ;;; the Free Software Foundation; either version 3 of the License, or (at ;;; your option) any later version. ;;; ;;; GNU Guix is distributed in the hope that it will be useful, but ;;; WITHOUT ANY WARRANTY; without even the implied warranty of ;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;;; GNU General Public License for more details. ;;; ;;; You should have received a copy of the GNU General Public License ;;; along with GNU Guix. If not, see . (define-module (gnu packages admin) #:use-module ((guix licenses) #:prefix license:) #:use-module (guix packages) #:use-module (guix utils) #:use-module (guix download) #:use-module (guix git-download) #:use-module (guix build-system cmake) #:use-module (guix build-system gnu) #:use-module (guix build-system python) #:use-module (guix build-system trivial) #:use-module (gnu packages) #:use-module (gnu packages base) #:use-module (gnu packages cyrus-sasl) #:use-module (gnu packages ncurses) #:use-module (gnu packages readline) #:use-module (gnu packages linux) #:use-module (gnu packages lua) #:use-module (gnu packages guile) #:use-module (gnu packages gettext) #:use-module (gnu packages pcre) #:use-module (gnu packages perl) #:use-module (gnu packages tcl) #:use-module (gnu packages compression) #:use-module (gnu packages tls) #:use-module (gnu packages gnupg) #:use-module (gnu packages bison) #:use-module (gnu packages flex) #:use-module (gnu packages glib) #:use-module (gnu packages openldap) #:use-module (gnu packages mcrypt) #:use-module (gnu packages pkg-config) #:use-module (gnu packages popt) #:use-module (gnu packages python) #:use-module (gnu packages texinfo) #:use-module (gnu packages groff) #:use-module (gnu packages pciutils) #:use-module (gnu packages libusb) #:use-module (gnu packages libftdi) #:use-module (gnu packages image) #:use-module (gnu packages xorg) #:use-module (gnu packages python) #:use-module (gnu packages man) #:use-module (gnu packages autotools) #:use-module (gnu packages gnome) #:use-module (gnu packages kerberos) #:use-module (gnu packages gtk)) (define-public aide (package (name "aide") (version "0.15.1") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/aide/aide/" version "/aide-" version ".tar.gz")) (sha256 (base32 "1vsrc0s62kv1i84skm6k6zy868gayjck268qwj38rpspc8c5qgih")))) (build-system gnu-build-system) (native-inputs `(("bison" ,bison) ("flex" ,flex))) (inputs `(("libgcrypt" ,libgcrypt) ("libgpg-error" ,libgpg-error) ("libmhash" ,libmhash) ("zlib" ,zlib))) (synopsis "File and directory integrity checker") (description "AIDE (Advanced Intrusion Detection Environment) is a file and directory integrity checker. It creates a database from the regular expression rules that it finds from its configuration files. Once this database is initialized it can be used to verify the integrity of the files. It has several message digest algorithms that are used to check the integrity of files. All of the usual file attributes can be checked for inconsistencies.") (home-page "http://aide.sourceforge.net/") (license license:gpl2+))) (define-public progress (package (name "progress") (version "0.13") (source (origin (method url-fetch) (uri (string-append "https://github.com/Xfennec/" name "/archive/v" version ".tar.gz")) (sha256 (base32 "133iar4vq5vlklydb4cyazjy6slmpbndrws474mg738bd8avc30n")) (file-name (string-append name "-" version ".tar.gz")))) (build-system gnu-build-system) (inputs `(("ncurses" ,ncurses))) (arguments `(#:tests? #f ; There is no test suite. #:make-flags (list "CC=gcc" "LDFLAGS+=-lncurses" (string-append "PREFIX=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (delete 'configure)))) ; There's no configure phase. (home-page "https://github.com/Xfennec/progress") (synopsis "Program to view the progress of the coreutils commands") (description "A program that looks for coreutils basic commands (cp, mv, dd, tar, gzip/gunzip, cat, etc.) currently running on your system and displays the percentage of copied data. It can also show estimated time and throughput, and provides a \"top-like\" mode (monitoring).") (license license:gpl3+))) (define-public shepherd (package (name "shepherd") (version "0.3.2") (source (origin (method url-fetch) (uri (string-append "ftp://alpha.gnu.org/gnu/dmd/shepherd-" version ".tar.gz")) (sha256 (base32 "174q1qg7yg6w1hfvlfv720hr6hid4h5xzw15y3ycfpspllzldhcb")))) (build-system gnu-build-system) (arguments '(#:configure-flags '("--localstatedir=/var"))) (native-inputs `(("pkg-config" ,pkg-config))) (inputs `(("guile" ,guile-2.0))) (synopsis "System service manager") (description "The GNU Shepherd is a daemon-managing daemon, meaning that it supervises the execution of system services, replacing similar functionality found in typical init systems. It provides dependency-handling through a convenient interface and is based on GNU Guile.") (license license:gpl3+) (home-page "https://www.gnu.org/software/shepherd/") (properties '((ftp-server . "alpha.gnu.org"))))) (define-public dfc (package (name "dfc") (version "3.0.4") (source (origin (method url-fetch) (uri (string-append "http://projects.gw-computing.net/attachments/download/79/dfc-" version ".tar.gz")) (sha256 (base32 "0zk1ppx93ijimf4sbgqilxxikpsa2gmpbynknyh41xy7jbdjxp0b")))) (build-system cmake-build-system) (arguments '(#:tests? #f)) ; There are no tests. (native-inputs `(("gettext" ,gettext-minimal))) (home-page "http://projects.gw-computing.net/projects/dfc") (synopsis "Display file system space usage using graphs and colors") (description "dfc (df color) is a modern version of df. It uses colors, draws pretty graphs and can export its output to different formats.") (license license:bsd-3))) (define-public htop (package (name "htop") (version "2.0.2") (source (origin (method url-fetch) (uri (string-append "http://hisham.hm/htop/releases/" version "/htop-" version ".tar.gz")) (sha256 (base32 "11zlwadm6dpkrlfvf3z3xll26yyffa7qrxd1w72y1kl0rgffk6qp")))) (build-system gnu-build-system) (inputs `(("ncurses" ,ncurses))) (home-page "http://htop.sourceforge.net/") (synopsis "Interactive process viewer") (description "This is htop, an interactive process viewer. It is a text-mode application (for console or X terminals) and requires ncurses.") (license license:gpl2))) (define-public pies (package (name "pies") (version "1.3") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/pies/pies-" version ".tar.bz2")) (sha256 (base32 "12r7rjjyibjdj08dvwbp0iflfpzl4s0zhn6cr6zj3hwf9gbzgl1g")))) (build-system gnu-build-system) (arguments '(#:phases (modify-phases %standard-phases (add-before 'build 'patch-/bin/sh (lambda* (#:key inputs #:allow-other-keys) ;; Use the right shell when executing user-provided ;; shell commands. (let ((bash (assoc-ref inputs "bash"))) (substitute* "src/progman.c" (("\"/bin/sh\"") (string-append "\"" bash "/bin/sh\""))) #t)))))) (home-page "http://www.gnu.org/software/pies/") (synopsis "Program invocation and execution supervisor") (description "GNU pies is a program that supervises the invocation and execution of other programs. It reads the list of programs to be started from its configuration file, executes them, and then monitors their status, re-executing them as necessary.") (license license:gpl3+))) (define-public inetutils (package (name "inetutils") (version "1.9.4") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/inetutils/inetutils-" version ".tar.gz")) (sha256 (base32 "05n65k4ixl85dc6rxc51b1b732gnmm8xnqi424dy9f1nz7ppb3xy")))) (build-system gnu-build-system) (arguments `(#:configure-flags '("--localstatedir=/var") ;; FIXME: `tftp.sh' relies on `netstat' from utils-linux, ;; which is currently missing. #:tests? #f)) (inputs `(("ncurses" ,ncurses) ("readline" ,readline))) ; for 'ftp' (home-page "http://www.gnu.org/software/inetutils/") (synopsis "Basic networking utilities") (description "Inetutils is a collection of common network programs, such as an ftp client and server, a telnet client and server, and an rsh client and server.") (license license:gpl3+))) (define-public shadow (package (name "shadow") (version "4.2.1") (source (origin (method url-fetch) (uri (string-append "http://pkg-shadow.alioth.debian.org/releases/" name "-" version ".tar.xz")) (sha256 (base32 "0h9x1zdbq0pqmygmc1x459jraiqw4gqz8849v268crk78z8r621v")))) (build-system gnu-build-system) (arguments '(;; Assume System V `setpgrp (void)', which is the default on GNU ;; variants (`AC_FUNC_SETPGRP' is not cross-compilation capable.) #:configure-flags '("--with-libpam" "ac_cv_func_setpgrp_void=yes") #:phases (alist-cons-before 'build 'set-nscd-file-name (lambda* (#:key inputs #:allow-other-keys) ;; Use the right file name for nscd. (let ((libc (assoc-ref inputs "libc"))) (substitute* "lib/nscd.c" (("/usr/sbin/nscd") (string-append libc "/sbin/nscd"))))) (alist-cons-after 'install 'remove-groups (lambda* (#:key outputs #:allow-other-keys) ;; Remove `groups', which is already provided by Coreutils. (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (man (string-append out "/share/man"))) (delete-file (string-append bin "/groups")) (for-each delete-file (find-files man "^groups\\.")) #t)) %standard-phases)))) (inputs (if (string-suffix? "-linux" (or (%current-target-system) (%current-system))) `(("linux-pam" ,linux-pam)) '())) (home-page "http://pkg-shadow.alioth.debian.org/") (synopsis "Authentication-related tools such as passwd, su, and login") (description "Shadow provides a number of authentication-related tools, including: login, passwd, su, groupadd, and useradd.") ;; The `vipw' program is GPLv2+. ;; libmisc/salt.c is public domain. (license license:bsd-3))) (define-public mingetty (package (name "mingetty") (version "1.08") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/mingetty/mingetty/" version "/mingetty-" version ".tar.gz")) (sha256 (base32 "05yxrp44ky2kg6qknk1ih0kvwkgbn9fbz77r3vci7agslh5wjm8g")))) (build-system gnu-build-system) (arguments `(#:phases (alist-replace 'configure (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (man8 (string-append out "/share/man/man8")) (sbin (string-append out "/sbin")) (shadow (assoc-ref inputs "shadow")) (login (string-append shadow "/bin/login"))) (substitute* "Makefile" (("^SBINDIR.*") (string-append "SBINDIR = " out "/sbin\n")) (("^MANDIR.*") (string-append "MANDIR = " out "/share/man/man8\n"))) ;; Pick the right 'login' by default. (substitute* "mingetty.c" (("\"/bin/login\"") (string-append "\"" login "\""))) (mkdir-p sbin) (mkdir-p man8))) %standard-phases) #:tests? #f)) ; no tests (inputs `(("shadow" ,shadow))) (home-page "https://sourceforge.net/projects/mingetty") (synopsis "Getty for the text console") (description "Small console getty that is started on the Linux text console, asks for a login name and then transfers over to 'login'. It is extended to allow automatic login and starting any app.") (license license:gpl2+))) (define-public net-base (package (name "net-base") (version "5.3") (source (origin (method url-fetch) (uri (string-append "mirror://debian/pool/main/n/netbase/netbase_" version ".tar.xz")) (sha256 (base32 "12xqjwg3p4rzmmh2iib6sigm9l29y3dgk74mmnw64k84jnbwdxl1")))) (build-system trivial-build-system) (arguments `(#:modules ((guix build utils)) #:builder (begin (use-modules (guix build utils) (srfi srfi-26)) (let* ((source (assoc-ref %build-inputs "source")) (tar (assoc-ref %build-inputs "tar")) (xz (assoc-ref %build-inputs "xz")) (output (assoc-ref %outputs "out")) (etc (string-append output "/etc"))) (setenv "PATH" (string-append xz "/bin")) (system* (string-append tar "/bin/tar") "xvf" source) (chdir ,(string-append "netbase-" version)) (mkdir-p etc) (for-each copy-file '("etc-services" "etc-protocols" "etc-rpc") (map (cut string-append etc "/" <>) '("services" "protocols" "rpc"))) #t)))) (native-inputs `(("tar" ,tar) ("xz" ,xz))) (synopsis "IANA protocol, port, and RPC number assignments") (description "This package provides the /etc/services, /etc/protocols, and /etc/rpc files, which contain information about the IANA-assigned port, protocol, and ONC RPC numbers.") (home-page "http://packages.debian.org/sid/netbase") (license license:gpl2))) (define-public netcat (package (name "netcat") (version "0.7.1") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/netcat/netcat/" version "/netcat-" version ".tar.bz2")) (sha256 (base32 "1frjcdkhkpzk0f84hx6hmw5l0ynpmji8vcbaxg8h5k2svyxz0nmm")))) (build-system gnu-build-system) (arguments `(#:configure-flags ;; By default, man and info pages are put in PREFIX/{man,info}, ;; but we want them in PREFIX/share/{man,info}. (let ((out (assoc-ref %outputs "out"))) (list (string-append "--mandir=" out "/share/man") (string-append "--infodir=" out "/share/info"))))) (home-page "http://netcat.sourceforge.net") (synopsis "Read and write data over TCP/IP") (description "Netcat is a featured networking utility which reads and writes data across network connections, using the TCP/IP protocol. It is designed to be a reliable \"back-end\" tool that can be used directly or easily driven by other programs and scripts. At the same time, it is a feature-rich network debugging and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities.") (license license:gpl2+))) (define-public alive (package (name "alive") (version "2.0.2") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/alive/alive-" version ".tar.xz")) (sha256 (base32 "1vrzg51ai68x9yld7vbgl58sxaw5qpx8rbakwcxn4cqq6vpxj38j")))) (build-system gnu-build-system) (arguments '(#:configure-flags '("alive_cv_nice_ping=yes"))) (inputs `(("guile" ,guile-2.0) ("inetutils" ,inetutils))) (home-page "http://www.gnu.org/software/alive/") (synopsis "Autologin and keep-alive daemon") (description "GNU Alive sends periodic pings to a server, generally to keep a connection alive.") (license license:gpl3+))) (define-public isc-dhcp (let* ((bind-major-version "9") (bind-minor-version "9") (bind-patch-version "9") (bind-release-type "-P") ; for patch release, use "-P" (bind-release-version "5") ; for patch release, e.g. "4" (bind-version (string-append bind-major-version "." bind-minor-version "." bind-patch-version bind-release-type bind-release-version))) (package (name "isc-dhcp") (version "4.3.5") (source (origin (method url-fetch) (uri (string-append "http://ftp.isc.org/isc/dhcp/" version "/dhcp-" version ".tar.gz")) (sha256 (base32 "0m7rwxvpb7xrmfl9ynpckhl0hi0xgm9bq1fmbp2r68sxy5mr75gb")))) (build-system gnu-build-system) (arguments `(#:parallel-build? #f #:phases (modify-phases %standard-phases (add-after 'unpack 'replace-bundled-bind (lambda* (#:key inputs #:allow-other-keys) (delete-file "bind/bind.tar.gz") (copy-file (assoc-ref inputs "bind-source-tarball") "bind/bind.tar.gz") (chmod "bind/bind.tar.gz" #o644) (substitute* "bind/version.tmp" (("^MAJORVER=.*") (format #f "MAJORVER=~a\n" ,bind-major-version)) (("^MINORVER=.*") (format #f "MINORVER=~a\n" ,bind-minor-version)) (("^PATCHVER=.*") (format #f "PATCHVER=~a\n" ,bind-patch-version)) (("^RELEASETYPE=.*") (format #f "RELEASETYPE=~a\n" ,bind-release-type)) (("^RELEASEVER=.*") (format #f "RELEASEVER=~a\n" ,bind-release-version))) #t)) (add-after 'configure 'post-configure (lambda* (#:key outputs #:allow-other-keys) ;; Point to the right client script, which will be ;; installed in a later phase. (substitute* "includes/dhcpd.h" (("#define[[:blank:]]+_PATH_DHCLIENT_SCRIPT.*") (let ((out (assoc-ref outputs "out"))) (string-append "#define _PATH_DHCLIENT_SCRIPT \"" out "/libexec/dhclient-script" "\"\n")))) ;; During the 'build' phase, 'bind.tar.gz' is extracted, so ;; we must patch shebangs in there and make sure the right ;; shell is used. (with-directory-excursion "bind" (substitute* "Makefile" (("\\./configure") (let ((sh (which "sh"))) (string-append "./configure CONFIG_SHELL=" sh " SHELL=" sh)))) (let ((bind-directory (string-append "bind-" ,bind-version))) (system* "tar" "xf" "bind.tar.gz") (for-each patch-shebang (find-files bind-directory ".*")) (zero? (system* "tar" "cf" "bind.tar.gz" bind-directory ;; avoid non-determinism in the archive "--sort=name" "--mtime=@0" "--owner=root:0" "--group=root:0")))))) (add-after 'install 'post-install (lambda* (#:key inputs outputs #:allow-other-keys) ;; Install the dhclient script for GNU/Linux and make sure ;; if finds all the programs it needs. (let* ((out (assoc-ref outputs "out")) (libexec (string-append out "/libexec")) (coreutils (assoc-ref inputs "coreutils")) (inetutils (assoc-ref inputs "inetutils")) (net-tools (assoc-ref inputs "net-tools")) (sed (assoc-ref inputs "sed"))) (substitute* "client/scripts/linux" (("/sbin/ip") (string-append (assoc-ref inputs "iproute") "/sbin/ip"))) (mkdir-p libexec) (copy-file "client/scripts/linux" (string-append libexec "/dhclient-script")) (wrap-program (string-append libexec "/dhclient-script") `("PATH" ":" prefix ,(map (lambda (dir) (string-append dir "/bin:" dir "/sbin")) (list inetutils net-tools coreutils sed)))))))))) (native-inputs `(("perl" ,perl))) (inputs `(("inetutils" ,inetutils) ("net-tools" ,net-tools) ("iproute" ,iproute) ;; XXX isc-dhcp bundles a copy of bind that has security ;; flaws, so we use a newer version. ("bind-source-tarball" ,(origin (method url-fetch) (uri (string-append "http://ftp.isc.org/isc/bind9/" bind-version "/bind-" bind-version ".tar.gz")) (sha256 (base32 "1yn15chkfqf4d7961ip2x10jm27a9wqymz2xqh0a2g89arrirkaw")))) ;; When cross-compiling, we need the cross Coreutils and sed. ;; Otherwise just use those from %FINAL-INPUTS. ,@(if (%current-target-system) `(("coreutils" ,coreutils) ("sed" ,sed)) '()))) (home-page "http://www.isc.org/products/DHCP/") (synopsis "Dynamic Host Configuration Protocol (DHCP) tools") (description "ISC's Dynamic Host Configuration Protocol (DHCP) distribution provides a reference implementation of all aspects of DHCP, through a suite of DHCP tools: server, client, and relay agent.") (license license:isc) (properties '((cpe-name . "dhcp")))))) (define-public libpcap (package (name "libpcap") (version "1.8.1") (source (origin (method url-fetch) (uri (string-append "http://www.tcpdump.org/release/libpcap-" version ".tar.gz")) (sha256 (base32 "07jlhc66z76dipj4j5v3dig8x6h3k6cb36kmnmpsixf3zmlvqgb7")))) (build-system gnu-build-system) (native-inputs `(("bison" ,bison) ("flex" ,flex))) (arguments '(#:configure-flags '("--with-pcap=linux") #:tests? #f)) ; no 'check' target (home-page "http://www.tcpdump.org") (synopsis "Network packet capture library") (description "libpcap is an interface for user-level packet capture. It provides a portable framework for low-level network monitoring. Applications include network statistics collection, security monitoring, network debugging, etc.") ;; fad-*.c and a couple other files are BSD-4, but the rest is BSD-3. (license license:bsd-3))) (define-public tcpdump (package (name "tcpdump") (version "4.7.4") (source (origin (method url-fetch) (uri (string-append "http://www.tcpdump.org/release/tcpdump-" version ".tar.gz")) (sha256 (base32 "1byr8w6grk08fsq0444jmcz9ar89lq9nf4mjq2cny0w9k8k21rbb")))) (build-system gnu-build-system) (inputs `(("libpcap" ,libpcap) ("openssl" ,openssl))) (native-inputs `(("perl" ,perl))) ; for tests (home-page "http://www.tcpdump.org/") (synopsis "Network packet analyzer") (description "Tcpdump is a command-line tool to analyze network traffic passing through the network interface controller.") (license license:bsd-3))) (define-public jnettop (package (name "jnettop") (version "0.13.0") (source (origin (method url-fetch) (uri (string-append "http://jnettop.kubs.info/dist/jnettop-" version ".tar.gz")) (sha256 (base32 "1855np7c4b0bqzhf1l1dyzxb90fpnvrirdisajhci5am6als31z9")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) (inputs `(("glib" ,glib) ("ncurses" ,ncurses) ("libpcap" ,libpcap))) (home-page "http://jnettop.kubs.info/") (synopsis "Visualize network traffic by bandwidth use") (description "Jnettop is a traffic visualiser, which captures traffic going through the host it is running from and displays streams sorted by bandwidth they use.") (license license:gpl2+))) (define-public clusterssh (package (name "clusterssh") (version "3.28") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/clusterssh/" "1.%20ClusterSSH%20Series%203/" version "/clusterssh-" version ".tar.gz")) (sha256 (base32 "1bwggpvaj2al5blg1ynapviv2kpydffpzq2zkhi81najnvzc1rr7")))) (build-system gnu-build-system) (inputs `(("perl" ,perl))) (propagated-inputs `(("xterm" ,xterm) ("perl-tk" ,perl-tk) ("perl-x11-protocol" ,perl-x11-protocol))) (arguments `(#:phases (alist-cons-after 'install 'set-load-paths (lambda* (#:key inputs outputs #:allow-other-keys) ;; Put the perl-tk and perl-x11-protocol modules in the perl inc ;; path for PROG (let* ((out (assoc-ref outputs "out")) (prog (string-append out "/bin/cssh")) (perl-ver ,(package-version perl)) (x11-inc (string-append (assoc-ref inputs "perl-x11-protocol") "/lib/perl5/site_perl/" perl-ver)) (tk-inc (string-append (assoc-ref inputs "perl-tk") "/lib/perl5/site_perl/" perl-ver "/x86_64-linux"))) (wrap-program prog `("PERL5LIB" ":" prefix (,x11-inc ,tk-inc))))) %standard-phases))) ;; The clusterssh.sourceforge.net address requires login to view (home-page "https://sourceforge.net/projects/clusterssh/") (synopsis "Secure concurrent multi-server terminal control") (description "ClusterSSH controls a number of xterm windows via a single graphical console window to allow commands to be interactively run on multiple servers over ssh connections.") (license license:gpl2+))) (define-public rottlog (package (name "rottlog") (version "0.72.2") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/rottlog/rottlog-" version ".tar.gz")) (sha256 (base32 "0751mb9l2f0jrk3vj6q8ilanifd121dliwk0c34g8k0dlzsv3kd7")) (modules '((guix build utils))) (snippet '(substitute* "Makefile.in" (("-o \\$\\{LOG_OWN\\} -g \\$\\{LOG_GROUP\\}") ;; Don't try to chown root. "") (("mkdir -p \\$\\(ROTT_STATDIR\\)") ;; Don't attempt to create /var/lib/rottlog. "true"))))) (build-system gnu-build-system) (arguments '(#:configure-flags (list "ROTT_ETCDIR=/etc/rottlog" ;rc file location "--localstatedir=/var") ;; Install example config files in OUT/etc. #:make-flags (list (string-append "ROTT_ETCDIR=" (assoc-ref %outputs "out") "/etc")) #:phases (modify-phases %standard-phases (add-after 'build 'set-packdir (lambda _ ;; Set a default location for archived logs. (substitute* "rc/rc" (("packdir=\"\"") "packdir=\"/var/log\"")) #t)) (add-before 'install 'tweak-rc-weekly (lambda _ (substitute* "rc/weekly" (("/bin/kill") (which "kill")) (("syslogd\\.pid") ;; The file is called 'syslog.pid' (no 'd'). "syslog.pid")) #t)) (add-after 'install 'install-info (lambda _ (zero? (system* "make" "install-info"))))))) (native-inputs `(("texinfo" ,texinfo) ("util-linux" ,util-linux))) ; for 'cal' (home-page "http://www.gnu.org/software/rottlog/") (synopsis "Log rotation and management") (description "GNU Rot[t]log is a program for managing log files. It is used to automatically rotate out log files when they have reached a given size or according to a given schedule. It can also be used to automatically compress and archive such logs. Rot[t]log will mail reports of its activity to the system administrator.") (license license:gpl3+))) (define-public sudo (package (name "sudo") (version "1.8.19p1") (source (origin (method url-fetch) (uri (list (string-append "https://www.sudo.ws/sudo/dist/sudo-" version ".tar.gz") (string-append "ftp://ftp.sudo.ws/pub/sudo/OLD/sudo-" version ".tar.gz"))) (sha256 (base32 "14pwdwl03kdbbyjkvxrfx409x3c1fjqz8aqz2wgwddinhz7v3bxq")))) (build-system gnu-build-system) (arguments `(#:configure-flags (list "--with-logpath=/var/log/sudo.log" "--with-rundir=/var/run/sudo" ;must be cleaned up at boot time "--with-vardir=/var/db/sudo" "--with-iologdir=/var/log/sudo-io" ;; 'visudo.c' expects _PATH_MV to be defined, but glibc doesn't ;; provide it. (string-append "CPPFLAGS=-D_PATH_MV='\"" (assoc-ref %build-inputs "coreutils") "/bin/mv\"'")) ;; Avoid non-determinism; see . #:parallel-build? #f #:phases (alist-cons-before 'configure 'pre-configure (lambda _ (substitute* "src/sudo_usage.h.in" ;; Do not capture 'configure' arguments since we would ;; unduly retain references, and also because the ;; CPPFLAGS above would close the string literal ;; prematurely. (("@CONFIGURE_ARGS@") "\"\"")) (substitute* (find-files "." "Makefile\\.in") (("-o [[:graph:]]+ -g [[:graph:]]+") ;; Allow installation as non-root. "") (("^install: (.*)install-sudoers(.*)" _ before after) ;; Don't try to create /etc/sudoers. (string-append "install: " before after "\n")) (("\\$\\(DESTDIR\\)\\$\\(rundir\\)") ;; Don't try to create /run/sudo. "$(TMPDIR)/dummy") (("\\$\\(DESTDIR\\)\\$\\(vardir\\)") ;; Don't try to create /var/db/sudo. "$(TMPDIR)/dummy"))) %standard-phases) ;; XXX: The 'testsudoers' test series expects user 'root' to exist, but ;; the chroot's /etc/passwd doesn't have it. Turn off the tests. #:tests? #f)) (inputs `(("groff" ,groff) ("linux-pam" ,linux-pam) ("coreutils" ,coreutils))) (home-page "https://www.sudo.ws/") (synopsis "Run commands as root") (description "Sudo (su \"do\") allows a system administrator to delegate authority to give certain users (or groups of users) the ability to run some (or all) commands as root or another user while providing an audit trail of the commands and their arguments.") ;; See . (license license:x11))) (define-public wpa-supplicant-minimal (package (name "wpa-supplicant-minimal") (version "2.6") (source (origin (method url-fetch) (uri (string-append "http://w1.fi/releases/wpa_supplicant-" version ".tar.gz")) (sha256 (base32 "0l0l5gz3d5j9bqjsbjlfcv4w4jwndllp9fmyai4x9kg6qhs6v4xl")))) (build-system gnu-build-system) (arguments '(#:phases (alist-replace 'configure (lambda* (#:key outputs #:allow-other-keys) (chdir "wpa_supplicant") (copy-file "defconfig" ".config") (let ((port (open-file ".config" "al"))) (display " CONFIG_DEBUG_SYSLOG=y # Choose GnuTLS (the default is OpenSSL.) CONFIG_TLS=gnutls CONFIG_DRIVER_NL80211=y CFLAGS += $(shell pkg-config libnl-3.0 --cflags) CONFIG_LIBNL32=y CONFIG_READLINE=y\n" port) (close-port port))) (alist-cons-after 'install 'install-man-pages (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (man (string-append out "/share/man")) (man5 (string-append man "/man5")) (man8 (string-append man "/man8"))) (define (copy-man-page target) (lambda (file) (copy-file file (string-append target "/" (basename file))))) (mkdir-p man5) (mkdir man8) (for-each (copy-man-page man5) (find-files "doc/docbook" "\\.5")) (for-each (copy-man-page man8) (find-files "doc/docbook" "\\.8")) #t)) %standard-phases)) #:make-flags (list "CC=gcc" (string-append "BINDIR=" (assoc-ref %outputs "out") "/sbin") (string-append "LIBDIR=" (assoc-ref %outputs "out") "/lib")) #:tests? #f)) (inputs `(("readline" ,readline) ("libnl" ,libnl) ("gnutls" ,gnutls) ("libgcrypt" ,libgcrypt))) ;needed by crypto_gnutls.c (native-inputs `(("pkg-config" ,pkg-config))) (home-page "http://w1.fi/wpa_supplicant/") (synopsis "Connecting to WPA and WPA2-protected wireless networks") (description "wpa_supplicant is a WPA Supplicant with support for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA component that is used in the client stations. It implements key negotiation with a WPA Authenticator and it controls the roaming and IEEE 802.11 authentication/association of the WLAN driver. This package provides the 'wpa_supplicant' daemon and the 'wpa_cli' command.") ;; In practice, this is linked against Readline, which makes it GPLv3+. (license license:bsd-3))) (define-public wpa-supplicant (package (inherit wpa-supplicant-minimal) (name "wpa-supplicant") (inputs `(("dbus" ,dbus) ,@(package-inputs wpa-supplicant-minimal))) (arguments (substitute-keyword-arguments (package-arguments wpa-supplicant-minimal) ((#:phases phases) `(alist-cons-after 'configure 'configure-for-dbus (lambda _ (let ((port (open-file ".config" "al"))) (display " CONFIG_CTRL_IFACE_DBUS=y CONFIG_CTRL_IFACE_DBUS_NEW=y CONFIG_CTRL_IFACE_DBUS_INTRO=y\n" port) (close-port port)) #t) (alist-cons-after 'install-man-pages 'install-dbus-conf (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (dir (string-append out "/etc/dbus-1/system.d"))) (mkdir-p dir) (copy-file "dbus/dbus-wpa_supplicant.conf" (string-append dir "/wpa_supplicant.conf")))) ,phases))))))) (define-public wakelan (package (name "wakelan") (version "1.1") (source (origin (method url-fetch) (uri (string-append "ftp://ftp.gwdg.de/pub/linux/metalab/system/network/misc/wakelan-" version ".tar.gz")) (sha256 (base32 "0vydqpf44146ir6k87gmqaq6xy66xhc1gkr3nsd7jj3nhy7ypx9x")))) (build-system gnu-build-system) (arguments '(#:phases (alist-replace 'configure (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (mkdir-p (string-append out "/bin")) (mkdir-p (string-append out "/share/man/man1")) ;; It's an old configure script that doesn't understand ;; the extra options we pass. (setenv "CONFIG_SHELL" (which "bash")) (zero? (system* "./configure" (string-append "--prefix=" out) (string-append "--mandir=" out "/share/man"))))) %standard-phases) #:tests? #f)) (home-page "http://kernel.org") ; really, no home page (synopsis "Send a wake-on-LAN packet") (description "WakeLan broadcasts a properly formatted UDP packet across the local area network, which causes enabled computers to power on.") (license license:gpl2+))) (define-public dmidecode (package (name "dmidecode") (version "3.0") (source (origin (method url-fetch) (uri (string-append "mirror://savannah/dmidecode/dmidecode-" version ".tar.xz")) (sha256 (base32 "0iby0xfk5x3cdr0x0gxj5888jjyjhafvaq0l79civ73jjfqmphvy")))) (build-system gnu-build-system) (arguments '(#:phases (modify-phases %standard-phases (delete 'configure)) #:tests? #f ; no 'check' target #:make-flags (list (string-append "prefix=" (assoc-ref %outputs "out"))))) (home-page "http://www.nongnu.org/dmidecode/") (synopsis "Read hardware information from the BIOS") (description "Dmidecode reports information about your system's hardware as described in your system BIOS according to the SMBIOS/DMI standard. This typically includes system manufacturer, model name, serial number, BIOS version, asset tag as well as a lot of other details of varying level of interest and reliability depending on the manufacturer. This will often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI, ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel, USB).") (license license:gpl2+))) (define-public acpica (package (name "acpica") (version "20150410") (source (origin (method url-fetch) (uri (string-append "https://acpica.org/sites/acpica/files/acpica-unix2-" version ".tar.gz")) (sha256 (base32 "0q1fjwkyw9x6gsva6fd0zbn7ly4fx0ha4853f416np9kf2irillw")))) (build-system gnu-build-system) (native-inputs `(("flex" ,flex) ("bison" ,bison))) (arguments '(#:make-flags (list (string-append "PREFIX=" %output) "HOST=_LINUX" "OPT_CFLAGS=-Wall -fno-strict-aliasing") #:tests? #f ; no 'check' target. #:phases (alist-delete 'configure %standard-phases))) (home-page "http://acpica.org/") (synopsis "Tools for the development and debug of ACPI tables") (description "The ACPI Component Architecture (ACPICA) project provides an OS-independent reference implementation of the Advanced Configuration and Power Interface Specification (ACPI). ACPICA code contains those portions of ACPI meant to be directly integrated into the host OS as a kernel-resident subsystem, and a small set of tools to assist in developing and debugging ACPI tables. This package contains only the user-space tools needed for ACPI table development, not the kernel implementation of ACPI.") (license license:gpl2))) ; Dual GPLv2/ACPICA Licence (define-public stress (package (name "stress") (version "1.0.1") (source (origin (method url-fetch) (uri (string-append "mirror://debian/pool/main/s/stress/stress_" version ".orig.tar.gz")) (sha256 (base32 "1v9vnzlihqfjsxa93hdbrq72pqqk00dkylmlg8jpxhm7s1w9qfl1")))) (build-system gnu-build-system) (home-page "http://packages.debian.org/wheezy/stress") (synopsis "Impose load on and stress test a computer system") (description "Stress is a tool that imposes a configurable amount of CPU, memory, I/O, or disk stress on a POSIX-compliant operating system and reports any errors it detects. Stress is not a benchmark. It is a tool used by system administrators to evaluate how well their systems will scale, by kernel programmers to evaluate perceived performance characteristics, and by systems programmers to expose the classes of bugs which only or more frequently manifest themselves when the system is under heavy load.") (license license:gpl2+))) (define-public detox (package (name "detox") (version "1.2.0") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/detox/detox/" version "/detox-" version ".tar.bz2")) (sha256 (base32 "1y6vvjqsg54kl49cry73jbfhr04s7wjs779vrr9zrq6kww7dkymb")))) (build-system gnu-build-system) ;; Both flex and popt are used in this case for their runtime libraries ;; (libfl and libpopt). (inputs `(("flex" ,flex) ("popt" ,popt))) (arguments `(#:configure-flags `(,(string-append "--with-popt=" (assoc-ref %build-inputs "popt"))) #:tests? #f)) ;no 'check' target (home-page "http://detox.sourceforge.net") (synopsis "Clean up file names") (description "Detox is a program that renames files to make them easier to work with under Unix and related operating systems. Spaces and various other unsafe characters (such as \"$\") get replaced with \"_\". ISO 8859-1 (Latin-1) characters can be replaced as well, as can UTF-8 characters.") (license license:bsd-3))) (define-public testdisk (package (name "testdisk") (version "7.0") (source (origin (method url-fetch) (uri (string-append "http://www.cgsecurity.org/testdisk-" version ".tar.bz2")) (sha256 (base32 "0ba4wfz2qrf60vwvb1qsq9l6j0pgg81qgf7fh22siaz649mkpfq0")))) (build-system gnu-build-system) (inputs `(("ntfs-3g" ,ntfs-3g) ("util-linux" ,util-linux) ("openssl" ,openssl) ;; FIXME: add reiserfs ("zlib" ,zlib) ("e2fsprogs" ,e2fsprogs) ("libjpeg" ,libjpeg) ("ncurses" ,ncurses))) (home-page "http://www.cgsecurity.org/wiki/TestDisk") (synopsis "Data recovery tool") (description "TestDisk is a program for data recovery, primarily designed to help recover lost partitions and/or make non-booting disks bootable again.") (license license:gpl2+))) (define-public tree (package (name "tree") (version "1.7.0") (source (origin (method url-fetch) (uri (string-append "http://mama.indstate.edu/users/ice/tree/src/tree-" version ".tgz")) (sha256 (base32 "04kviw799qxly08zb8n5mgxfd96gyis6x69q2qiw86jnh87c4mv9")))) (build-system gnu-build-system) (arguments '(#:phases (alist-delete 'configure %standard-phases) #:tests? #f ; no check target #:make-flags (let ((out (assoc-ref %outputs "out"))) (list (string-append "prefix=" out))))) (synopsis "Recursively list the contents of a directory") (description "Tree is a recursive directory listing command that produces a depth indented listing of files, which is colorized ala dircolors if the LS_COLORS environment variable is set and output is to tty.") (home-page "http://mama.indstate.edu/users/ice/tree/") (license license:gpl2+))) (define-public direvent (package (name "direvent") (version "5.1") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/direvent/direvent-" version ".tar.gz")) (sha256 (base32 "1nwvjmx7kb14ni34c0b8x9a3791pc20gvhj7xaj66d8q4h6n0qf4")) (modules '((guix build utils))) (snippet '(substitute* "tests/testsuite" (("#![[:blank:]]?/bin/sh") "#!$SHELL"))))) (build-system gnu-build-system) (arguments '(#:phases (alist-cons-before 'build 'patch-/bin/sh (lambda* (#:key inputs #:allow-other-keys) ;; Use the right shell when executing the watcher and ;; user-provided shell commands. (let ((bash (assoc-ref inputs "bash"))) (substitute* '("src/direvent.c" "src/progman.c") (("\"/bin/sh\"") (string-append "\"" bash "/bin/sh\""))) ;; Adjust the 'shell.at' test accordingly. (substitute* "tests/testsuite" (("SHELL=/bin/sh") (string-append "SHELL=" bash "/bin/sh"))) #t)) %standard-phases))) (home-page "http://www.gnu.org/software/direvent/") (synopsis "Daemon to monitor directories for events such as file removal") (description "A daemon that monitors directories for events, such as creating, deleting or modifying files. It can monitor different sets of directories for different events. When an event is detected, direvent calls a specified external program with information about the event, such as the location within the file system where it occurred. Thus, \"direvent\" provides an easy way to react immediately if given files undergo changes, for example, to track changes in important system configuration files.") (license license:gpl3+))) (define-public libcap-ng (package (name "libcap-ng") (version "0.7.4") (source (origin (method url-fetch) (uri (string-append "http://people.redhat.com/sgrubb/libcap-ng/libcap-ng-" version ".tar.gz")) (sha256 (base32 "0ssvnh4cvhya0c1j6k6192zvqcq7nc0x01fb5nwhr0prfqr0i8j8")))) (build-system gnu-build-system) (inputs `(("python" ,python))) (home-page "http://people.redhat.com/sgrubb/libcap-ng/") (synopsis "Library for more easily working with POSIX capabilities") (description "The libcap-ng library is intended to make programming with POSIX capabilities easier than the traditional libcap library. It includes utilities that can analyse all currently running applications and print out any capabilities and whether or not it has an open ended bounding set. The included utilities are designed to let admins and developers spot apps from various ways that may be running with too much privilege.") ;; The library is lgpl2.1+, but also ships some utils which are gpl2+. (license (list license:lgpl2.1+ license:gpl2+)))) (define-public smartmontools (package (name "smartmontools") (version "6.5") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/smartmontools/smartmontools/" version "/smartmontools-" version ".tar.gz")) (sha256 (base32 "1g25r6sx85b5lay5n6sbnqv05qxzj6xsafsp93hnrg1h044bps49")))) (build-system gnu-build-system) (inputs `(("libcap-ng" ,libcap-ng))) (home-page "http://www.smartmontools.org/") (synopsis "S.M.A.R.T. harddisk control and monitoring tools") (description "The smartmontools package contains utility programs to control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI harddisks. In many cases, these utilities will provide advanced warning of disk degradation and failure.") (license license:gpl2+))) (define-public fdupes (package (name "fdupes") (version "1.6.1") (source (origin (method url-fetch) (uri (string-append "https://github.com/adrianlopezroche/fdupes/archive/v" version ".tar.gz")) (file-name (string-append name "-" version ".tar.gz")) (sha256 (base32 "1sj9pa40pbz6xdwbxfwhdhkvhdf1xc5gvggk9mdq26c41gdnyswx")))) (build-system gnu-build-system) (arguments '(#:phases (modify-phases %standard-phases (delete 'configure)) #:tests? #f ; no 'check' target #:make-flags (list "CC=gcc" (string-append "PREFIX=" (assoc-ref %outputs "out"))))) (home-page "https://github.com/adrianlopezroche/fdupes") (synopsis "Identify duplicate files") (description "fdupes is a program for identifying duplicate files residing within specified directories.") (license license:expat))) (define-public graphios (package (name "graphios") (version "2.0.3") (source (origin (method url-fetch) (uri (string-append "https://pypi.python.org/packages/source/g/graphios/graphios-" version ".tar.gz")) (sha256 (base32 "1h87hvc315wg6lklbf4l7csd3n5pgljwrfli1p3nasdi0izgn66i")))) (build-system python-build-system) (arguments ;; Be warned: Building with Python 3 succeeds, but the build process ;; throws a syntax error that is ignored. `(#:python ,python-2 #:phases (modify-phases %standard-phases (add-before 'build 'fix-setup.py (lambda* (#:key outputs #:allow-other-keys) ;; Fix hardcoded, unprefixed file names. (let ((out (assoc-ref outputs "out"))) (substitute* '("setup.py") (("/etc") (string-append out "/etc")) (("/usr") out) (("distro_ver = .*") "distro_ver = ''")) #t)))))) (home-page "https://github.com/shawn-sterling/graphios") (synopsis "Emit Nagios metrics to Graphite, Statsd, and Librato") (description "Graphios is a script to emit nagios perfdata to various upstream metrics processing and time-series systems. It's currently compatible with Graphite, Statsd, Librato and InfluxDB. Graphios can emit Nagios metrics to any number of supported upstream metrics systems simultaneously.") (license license:gpl2+))) (define-public ansible (package (name "ansible") (version "2.2.1.0") (source (origin (method url-fetch) (uri (pypi-uri "ansible" version)) (sha256 (base32 "0gz9i30pdmkchi936ijy873k8di6fmf3v5rv551hxyf0hjkjx8b3")))) (build-system python-build-system) (native-inputs `(("python2-pycrypto" ,python2-pycrypto) ("python2-httplib2" ,python2-httplib2) ("python2-passlib" ,python2-passlib) ("python2-nose" ,python2-nose) ("python2-mock" ,python2-mock) ("python2-jinja2" ,python2-jinja2) ("python2-pyyaml" ,python2-pyyaml) ("python2-paramiko" ,python2-paramiko))) (inputs `(("python2-pycrypto" ,python2-pycrypto) ("python2-jinja2" ,python2-jinja2) ("python2-pyyaml" ,python2-pyyaml) ("python2-paramiko" ,python2-paramiko))) (arguments `(#:python ,python-2)) ; incompatible with Python 3 (home-page "http://ansible.com/") (synopsis "Radically simple IT automation") (description "Ansible is a radically simple IT automation system. It handles configuration-management, application deployment, cloud provisioning, ad-hoc task-execution, and multinode orchestration - including trivializing things like zero downtime rolling updates with load balancers.") (license license:gpl3+))) (define-public cpulimit (package (name "cpulimit") (version "0.2") (source (origin (method url-fetch) (uri (string-append "https://github.com/opsengine/cpulimit/archive/v" version ".tar.gz")) (file-name (string-append name "-" version ".tar.gz")) (sha256 (base32 "1nn2w849xd5bw4y5sqnll29nxdwl5h0cv4smc7dwmpb9qnd2ycb4")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (delete 'configure) (replace 'build (lambda _ (zero? (system* "make" "CC=gcc" "-Csrc")))) (replace 'check (lambda _ (zero? (system* "make" "CC=gcc" "-Ctests")))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) (install-file "src/cpulimit" bin))))))) (home-page "https://github.com/opsengine/cpulimit") (synopsis "Limit CPU usage") (description "Cpulimit limits the CPU usage of a process. It does not change the nice value or other scheduling priority settings, but the real CPU usage, and is able to adapt itself dynamically to the overall system load. Children processes and threads of the specified process may optionally share the same limits.") (license license:gpl2+))) (define-public autojump (package (name "autojump") (version "22.3.4") (source (origin (method url-fetch) (uri (string-append "https://github.com/wting/autojump/archive/" "release-v" version ".tar.gz")) (file-name (string-append name "-" version ".tar.gz")) (sha256 (base32 "113rcpr37ngf2xs8da41qdarq5qmj0dwx8ggqy3lhlb0kvqq7g9z")))) (build-system gnu-build-system) (native-inputs ;for tests `(("python-mock" ,python-mock) ("python-pytest" ,python-pytest))) (inputs `(("python" ,python-wrapper))) (arguments `(#:phases (modify-phases %standard-phases (delete 'configure) (delete 'build) (replace 'check (lambda _ (zero? (system* "python" "tests/unit/autojump_utils_test.py")))) (replace 'install ;; The install.py script doesn't allow system installation ;; into an arbitrary prefix, so do our own install. (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (share (string-append out "/share/autojump")) (py (string-append out "/lib/python" ,(version-major+minor (package-version python-wrapper)) "/site-packages")) (man (string-append out "/share/man/man1"))) (install-file "bin/autojump" bin) (for-each (λ (f) (install-file f py)) (find-files "bin" "\\.py$")) (for-each (λ (f) (install-file f share)) (find-files "bin" "autojump\\..*$")) (substitute* (string-append share "/autojump.sh") (("/usr/local") out)) (install-file "docs/autojump.1" man) (wrap-program (string-append bin "/autojump") `("PYTHONPATH" ":" prefix (,py))) #t)))))) (home-page "https://github.com/wting/autojump") (synopsis "Shell extension for file system navigation") (description "Autojump provides a faster way to navigate your file system, with a \"cd command that learns\". It works by maintaining a database of the directories you use the most from the command line and allows you to \"jump\" to frequently used directories by typing only a small pattern.") (license license:gpl3+))) (define-public iftop (package (name "iftop") (version "1.0pre4") (source (origin (method url-fetch) (uri (string-append "http://www.ex-parrot.com/~pdw/iftop/download" "/iftop-" version ".tar.gz")) (sha256 (base32 "15sgkdyijb7vbxpxjavh5qm5nvyii3fqcg9mzvw7fx8s6zmfwczp")))) (build-system gnu-build-system) (inputs `(("libpcap" ,libpcap) ("ncurses" ,ncurses))) (synopsis "Monitor network usage") (description "Iftop does for network usage what @command{top} does for CPU usage. It listens to network traffic on a named interface and displays a table of current bandwidth usage by pairs of hosts.") (home-page "http://www.ex-parrot.com/~pdw/iftop/") (license license:gpl2+))) (define-public munge (package (name "munge") (version "0.5.12") (source (origin (method url-fetch) (uri (string-append "https://github.com/dun/munge/releases/" "download/munge-" version "/munge-" version ".tar.xz")) (sha256 (base32 "1s0vlwgm3hcx75vcmjf2y3icy5nv8y07bx93w2cmm6a7x71y6wp9")))) (inputs `(("openssl" ,openssl) ("libgcrypt" ,libgcrypt))) (build-system gnu-build-system) (home-page "https://dun.github.io/munge/") (synopsis "Cluster computing authentication service") (description "Munge is an authentication service for creating and validating credentials. It allows a process to authenticate the UID and GID of another local or remote process within a group of hosts having common users and groups. These hosts form a security realm that is defined by a shared cryptographic key. Clients within this security realm can create and validate credentials without the use of root privileges, reserved ports, or platform-specific methods.") (license license:gpl3+))) (define-public audit (package (name "audit") (version "2.4.5") (source (origin (method url-fetch) (uri (string-append "http://people.redhat.com/sgrubb/audit/" "audit-" version ".tar.gz")) (sha256 (base32 "1q1q51dvxscbi4kbakmd4bn0xrvwwaiwvaya79925cbrqwzxsg77")))) (build-system gnu-build-system) (home-page "http://people.redhat.com/sgrubb/audit/") (arguments `(#:configure-flags (list "--with-python=no") #:phases (modify-phases %standard-phases (add-after 'unpack 'fix-tests (lambda _ ;; In the build environmnte /etc/passwd does not contain an entry ;; for root/0, so we have to patch the expected value. (substitute* "auparse/test/auparse_test.ref" (("=0 \\(root\\)") "=0 (unknown(0))")) #t))))) (inputs `(("openldap" ,openldap) ("gnutls" ,gnutls) ("sasl" ,cyrus-sasl))) (synopsis "User-space component to the Linux auditing system") (description "auditd is the user-space component to the Linux auditing system, which allows logging of system calls made by user-land processes. It's responsible for writing audit records to the disk. Viewing the logs is done with the @code{ausearch} or @code{aureport} utilities. Configuring the audit rules is done with the @code{auditctl} utility.") (license license:gpl2+))) (define-public nmap (package (name "nmap") (version "7.40") (source (origin (method url-fetch) (uri (string-append "https://nmap.org/dist/nmap-" version ".tar.bz2")) (sha256 (base32 "121i9mgyc28ra2825akd0ix5qyssv4xc2qlx296mam6hzxgnc54y")) (modules '((guix build utils))) (snippet '(map delete-file-recursively ;; Remove bundled lua, pcap, and pcre libraries. ;; FIXME: Remove bundled liblinear once packaged. '("liblua" "libpcap" "libpcre" ;; Remove pre-compiled binares. "mswin32"))))) (build-system gnu-build-system) (inputs `(("openssl" ,openssl) ("libpcap" ,libpcap) ("pcre" ,pcre) ("lua" ,lua) ;; For 'ndiff'. ("python" ,python-2))) ;; TODO Add zenmap output. (outputs '("out" "ndiff")) (arguments '(#:configure-flags '("--without-zenmap") #:phases (modify-phases %standard-phases (add-after 'configure 'patch-Makefile (lambda _ (substitute* "Makefile" ;; Do not attempt to build lua. (("build-dnet build-lua") "build-dnet")) #t)) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (define (make out . args) (unless (zero? (apply system* "make" (string-append "prefix=" out) args)) (error "make failed"))) (define (python-path dir) (string-append dir "/lib/python2.7/site-packages")) (let ((out (assoc-ref outputs "out")) (ndiff (assoc-ref outputs "ndiff"))) (for-each mkdir-p (list out ndiff)) (make out "install-nmap" "install-nse" "install-ncat" "install-nping") (make ndiff "install-ndiff") (wrap-program (string-append ndiff "/bin/ndiff") `("PYTHONPATH" prefix (,(python-path ndiff))))))) ;; These are the tests that do not require network access. (replace 'check (lambda _ (zero? (system* "make" "check-nse" "check-ndiff" "check-dns"))))) ;; Nmap can't cope with out-of-source building. #:out-of-source? #f)) (home-page "https://nmap.org/") (synopsis "Network discovery and security auditing tool") (description "Nmap (\"Network Mapper\") is a network discovery and security auditing tool. It is also useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. It also provides an advanced netcat implementation (ncat), a utility for comparing scan results (ndiff), and a packet generation and response analysis tool (nping).") ;; This package uses nmap's bundled versions of libdnet and liblinear, which ;; both use a 3-clause BSD license. (license (list license:nmap license:bsd-3)))) (define-public dstat (package (name "dstat") (version "0.7.3") (source (origin (method url-fetch) (uri (string-append "https://github.com/dagwieers/dstat/archive/" version ".tar.gz")) (file-name (string-append "dstat-" version ".tar.gz")) (sha256 (base32 "16286z3y2lc9nsq8njzjkv6k2vyxrj9xiixj1k3gnsbvhlhkirj6")))) (build-system gnu-build-system) (arguments `(#:tests? #f ;; no make check #:make-flags (let ((out (assoc-ref %outputs "out"))) (list (string-append "DESTDIR=" out) "prefix=/")) ;; no configure script #:phases (alist-delete 'configure %standard-phases))) (inputs `(("python-2" ,python-2))) (synopsis "Versatile resource statistics tool") (description "Dstat is a versatile replacement for @command{vmstat}, @command{iostat}, @command{netstat}, and @command{ifstat}. Dstat overcomes some of their limitations and adds some extra features, more counters and flexibility. Dstat is handy for monitoring systems during performance tuning tests, benchmarks or troubleshooting. Dstat allows you to view all of your system resources in real-time, you can, e.g., compare disk utilization in combination with interrupts from your IDE controller, or compare the network bandwidth numbers directly with the disk throughput (in the same interval).") (home-page "http://dag.wiee.rs/home-made/dstat/") (license license:gpl2+))) (define-public thefuck (package (name "thefuck") (version "3.11") (source (origin (method url-fetch) (uri (string-append "https://github.com/nvbn/thefuck/archive/" version ".tar.gz")) (file-name (string-append name "-" version ".tar.gz")) (sha256 (base32 "04q2cn8c83f6z6wn1scla1ilrpi5ssjc64987hvmwfvwvb82bvkp")))) (build-system python-build-system) (inputs `(("python-colorama" ,python-colorama) ("python-decorator" ,python-decorator) ("python-psutil" ,python-psutil) ("python-six" ,python-six))) (inputs ;; Requires setuptools >= 17.1 due to some features used, while our ;; python currently only includes 12.0. TODO: Remove this input. `(("python-setuptools" ,python-setuptools))) (home-page "https://github.com/nvbn/thefuck") (synopsis "Correct mistyped console command") (description "The Fuck tries to match a rule for a previous, mistyped command, creates a new command using the matched rule, and runs it.") (license license:x11))) (define-public di (package (name "di") (version "4.42") (source (origin (method url-fetch) (uri (string-append "https://gentoo.com/di/di-" version ".tar.gz")) (sha256 (base32 "1i6m9zdnidn8268q1lz9fd8payk7s4pgwh5zlam9rr4dy6h6a67n")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; Obscure test failures. #:phases (modify-phases %standard-phases (delete 'configure) (add-before 'build 'setup-environment (lambda* (#:key outputs #:allow-other-keys) (setenv "CC" "gcc") (setenv "prefix" (assoc-ref outputs "out")) #t))) #:make-flags (list "--environment-overrides"))) (home-page "https://www.gentoo.com/di/") (synopsis "Advanced df like disk information utility") (description "'di' is a disk information utility, displaying everything (and more) that your @code{df} command does. It features the ability to display your disk usage in whatever format you prefer. It is designed to be highly portable. Great for heterogenous networks.") (license license:zlib))) (define-public cbatticon (package (name "cbatticon") (version "1.6.4") (source (origin (method url-fetch) (uri (string-append "https://github.com/valr/" name "/archive/" version ".tar.gz")) (sha256 (base32 "023fvsa4q7rl98rqgwrb1shyzaybdkkbyz5sywd0s5p7ixkksxqx")) (file-name (string-append name "-" version ".tar.gz")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no tests #:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out")) "CC=gcc") #:phases (modify-phases %standard-phases (delete 'configure)))) ; no configure script (inputs `(("gtk+" ,gtk+) ("gettext" ,gettext-minimal) ("libnotify" ,libnotify))) (native-inputs `(("pkg-config" ,pkg-config))) (synopsis "Lightweight battery icon for the system tray") (description "cbatticon is a lightweight battery icon that displays the status of your battery in the system tray.") (home-page "https://github.com/valr/cbatticon") (license license:gpl2+))) (define-public interrobang (let ((revision "1") (commit "896543735e1c99144765fdbd7b6e6b5afbd8b881")) (package (name "interrobang") (version (string-append "0.0.0-" revision "." (string-take commit 7))) (source (origin (method git-fetch) (uri (git-reference (url "git://github.com/TrilbyWhite/interrobang") (commit commit))) (file-name (string-append name "-" version)) (sha256 (base32 "1n13m70p1hfba5dy3i8hfclbr6k9q3d9dai3dg4jvhdhmxcpjzdf")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no tests #:phases (modify-phases %standard-phases (delete 'configure)) ; no configure script #:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out"))))) (inputs `(("libx11" ,libx11))) (native-inputs `(("pkg-config" ,pkg-config))) (synopsis "Scriptable launcher menu") (description "Interrobang is a scriptable launcher menu with a customizable shortcut syntax and completion options.") (home-page "https://github.com/TrilbyWhite/interrobang") (license license:gpl3+)))) (define-public pam-krb5 (package (name "pam-krb5") (version "4.7") (source (origin (method url-fetch) (uri (string-append "https://archives.eyrie.org/software/kerberos/" name "-" version ".tar.xz")) (sha256 (base32 "0abf8cfpkprmhw5ca8iyqgrggh65lgqvmfllc1y6qz7zw1gas894")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'configure 'disable-tests (lambda _ ;; The build container seems to interfere with some tests. (substitute* "tests/TESTS" (("module/basic\n") "")) (substitute* "tests/TESTS" (("pam-util/vector\n") "")) #t))))) (inputs `(("linux-pam" ,linux-pam) ("mit-krb5" ,mit-krb5))) (native-inputs `(("perl" ,perl) ("perl-test-pod" ,perl-test-pod))) ; required for tests (synopsis "Kerberos PAM module") (description "Pam-krb5 is a Kerberos PAM module for either MIT Kerberos or Heimdal. It supports ticket refreshing by screen savers, configurable authorization handling, authentication of non-local accounts for network services, password changing, and password expiration, as well as all the standard expected PAM features. It works correctly with OpenSSH, even with ChallengeResponseAuthentication and PrivilegeSeparation enabled, and supports extensive configuration either by PAM options or in krb5.conf or both. PKINIT is supported with recent versions of both MIT Kerberos and Heimdal and FAST is supported with recent MIT Kerberos.") (home-page "http://www.eyrie.org/~eagle/software/pam-krb5") ;; Dual licenced under a homebrew non-copyleft OR GPL (any version) ;; However, the tarball does not contain a copy of the GPL, so unless ;; we put one in, we cannot distribute it under GPL without violating ;; clause requiring us to give all recipients a copy. (license license:gpl1+))) ;;http://archives.eyrie.org/software/kerberos/pam-krb5-4.7.tar.xz (define-public sunxi-tools (package (name "sunxi-tools") (version "1.4.2") (source (origin (method url-fetch) (uri (string-append "https://github.com/linux-sunxi/" "sunxi-tools/archive/v" version ".tar.gz")) (sha256 (base32 "08iqwj95qw2s7ilhrdi2lkbc8dx64zk5lzz1qk587jr0lla81x41")) (modules '((guix build utils))) (snippet ;; Remove binaries contained in the tarball which are only for the ;; target and can be regenerated anyway. '(delete-file-recursively "bin")) (file-name (string-append name "-" version ".tar.gz")))) (native-inputs `(("pkg-config" ,pkg-config))) (inputs `(("libusb" ,libusb))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no tests exist #:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out")) "CROSS_COMPILE=" "CC=gcc" "all") #:phases (modify-phases %standard-phases (delete 'configure) (replace 'install (lambda* (#:key make-flags #:allow-other-keys) (zero? (apply system* "make" "install-all" "install-misc" make-flags))))))) (home-page "https://github.com/linux-sunxi/sunxi-tools") (synopsis "Hardware management tools for Allwinner computers") (description "This package contains tools for Allwinner devices: @enumerate @item @command{sunxi-fexc}, @command{bin2fex}, @command{fex2bin}: Compile a textual description of a board (.fex) to a binary representation (.bin). @item @command{sunxi-fel}: Puts an Allwinner device into FEL mode which makes it register as a special USB device (rather than USB host). You can then connect it to another computer and flash it from there. @item @command{sunxi-nand-part}: Partitions NAND flash. @item @command{sunxi-bootinfo}: Reads out boot0 and boot1 (Allwinner bootloader) parameters. @item @command{sunxi-pio}: Sets GPIO parameters and oscillates a GPIO in order to be able to find it. @item @command{sunxi-meminfo}: Prints memory bus settings. @item @command{sunxi-nand-image-builder}: Prepares raw NAND images. @end enumerate") (license license:gpl2+)))