| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
transitive dependencies on KLEE's libraries rather than on the final
binaries. This is better because it means we can build
other tools that use KLEE's libraries and not need to express the
needed LLVM dependencies.
It also makes it clearer what the dependencies are between KLEE
libraries. This has illustrated a problem with the `kleeBasic`
library. It contains `ConstructSolverChain.cpp` which clearly
belongs in `kleaverSolver` not in `kleeBasic`. This will be fixed
later.
|
|
Links in the correct LLVM libraries when using the MCJIT. No effect for LLVM
versions less than 3.6
|
|
This is based off intial work by @jirislaby in #481. However it
has been substantially modified.
Notably it includes a separate build sytem to build the runtimes which
is inspired by the old build system. The reason for doing this is
because CMake is not well suited for building the runtime:
* CMake is configured to use the host compiler, not the bitcode
compiler. These are not the same thing.
* Building the runtime using `add_custom_command()` is flawed
because we can't automatically get transitive depencies (i.e.
header file dependencies) unless the CMake generator is makefiles.
(See `IMPLICIT_DEPENDS` of `add_custom_command()` in CMake).
So for now we have a very simple build system for building the runtimes.
In the future we can replace this with something more sophisticated if
we need it.
Support for all features of the old build system are implemented apart
from recording the git revision and showing it in the output of
`klee --help`.
Another notable change is the CMake build system works much better with
LLVM installs which don't ship with testing tools. The build system
will download the sources for `FileCheck` and `not` tools if the
corresponding binaries aren't available and will build them. However
`lit` (availabe via `pip install lit`) and GTest must already be
installed.
Apart from better support for testing a significant advantage of the
new CMake build system compared to the existing "Autoconf/Makefile"
build system is that it is **not** coupled to LLVM's build system
(unlike the existing build system). This means that LLVM's
autoconf/Makefiles don't need to be installed somewhere on the system.
Currently all tests pass.
Support has been implemented in TravisCI and the Dockerfile for
building with CMake.
The existing "Autoconf/Makefile" build system has been left intact
and so both build systems can coexist for a short while. We should
remove the old build system as soon as possible though because it
creates an unnecessary maintance burden.
|
|
In the description, --sym-argv and --sym-argvs should have instead been --sym-arg and --sym-args
|
|
klee_warning, and klee_error
|
|
function) (#455)
|
|
POSIX runtime. If the check fails, exit with an error. (#457)
|
|
|
|
Provide initial zlib-based compression support for
raw_outstreams. Replacing llvm::raw_fd_outstreams
with compressed_fd_outstreams automatically compresses
data in gzip format before writing to file.
Options added:
* --compress-log to compress all query log files (e.g. *.pc, *.smt2) on
the fly. Every query log file gets extended with .gz.
* --debug-compress-instructions to compress logfile for instruction
stream on the fly.
|
|
Added error message for -run-in directory errors
|
|
|
|
|
|
If klee is configured with certain bindir and runtime dir,
allow klee to be relocated, as long as subdirectory structure remains
intact.
For example, if klee is configured with bindir /usr/bin, and with
runtime dir /usr/lib/klee, but is relocated to certain directory
$RDIR, then running $RDIR/usr/bin/klee will search for runtime libraries
in $RDIR/usr/lib/klee.
Klee will use global runtime directory only when installed to global
binary directory.
Inspired by relocation code in gcc.
|
|
|
|
* ``-replay-out`` to ``-replay-ktest-file``
* ``-replay-out-dir`` to ``-replay-ktest-dir``
and also rename
* help descriptions
* global variables corresponding to these options.
* Names used in ``KleeHandler``, ``Interpreter``, ``Executor``
and in KLEE's ``main()`` function.
The old name for the options/code was very unhelpful as it wasn't
obvious that "out" files are ``.ktest`` files unless you examine KLEE's
source code.
|
|
|
|
Add support for tcmalloc
|
|
Added missing copyright headers per klee/issue #301
|
|
Beside improving performance of KLEE,
tcmalloc allows to track used memory correctly.
If available, tcmalloc is automatically used during compile time.
This can be forced to be:
- disabled using --without-tcmalloc
- enabled using --with-tcmalloc
In the second case, configure will fail if tcmalloc
is not found or usable.
Both versions of tcmalloc a minimal and normal version.
|
|
This allows a user to invoke klee with specific libraries to load from
command line. This is an attempt to allow klee to run on applications
linked to external libraries.
The libraries still have to be compiled specially for klee, in a manner
similar to klee-uclibc, i.e. archives (build with llvm-ar) of llvm IR
files.
|
|
|
|
which is based on the work of Andrew Santosa (see PR #295) but fixes
many bugs in that implementation. The implementation communicates
with Z3 via it's C API.
This implementation is based of the STPSolver and STPBuilder and so it
inherits a lot of its flaws (See TODOs and FIXMEs). I have also ripped
out some of the optimisations (constructMulByConstant,
constructSDivByConstant and constructUDivByConstant) that were used in
the STPBuilder because
* I don't trust them
* Z3 can probably do these for us in the future if we use the
``Z3_simplify()``
At a glance its performance seems worse than STP but future work can
look at improving this.
|
|
|
|
|
|
|
|
be included by tools that needs to link against MetaSMT. Apart from
making the Makefile code cleaner this allowed the Solver unit test
linking to succeed when not building with STP support.
Unfortunately when using MetaSMT as the core solver the Solver unit
tests do not pass. Clearly no one tried this before... :(
|
|
support
|
|
The default core solver is STP if KLEE is built with STP otherwise
it is MetaSMT.
Whilst I'm here rename SUPPORT_METASMT macro to ENABLE_METASMT for
consistency.
|
|
a ``createCoreSolver()`` function. The solver used is set by the new
``--solver-backend`` command line argument. The default is STP.
This change necessitated refactoring the MetaSMT stuff. That clearly
didn't belong in the Executor! The MetaSMT command line option is
now ``--metasmt-backend`` as this only picks the MetaSMT backend.
In order to use MetaSMT ``--solver-backend=metasmt`` needs to be passed.
Note I don't have MetaSMT built on my development machine so I don't
know if the MetaSMT stuff even compiles...
|
|
Support directory
|
|
|
|
|
|
preferences added in the POSIX model. Removed option --prefer-cex which controlled all CEX preferences.
|
|
s/KLEE_INSTALL_LIB_DIR/KLEE_INSTALL_RUNTIME_DIR/
The new name is more accurrate.
|
|
|
|
when they are given the --version command line option.
Unfortunately to make the build type and git revision available we
need to check this for every build which means KLEE's support library
will be rebuilt for every build which will slow down incremental builds.
This addresses issue #231
|
|
|
|
fix travis build of upstream STP and also how KLEE links against STP.
|
|
|
|
|
|
Instead of checking for every possible casse which result in overflow,
it is much simpler to perform the operation using integers with bigger
dimension and check if the result overflow
|
|
This requires clang with -fsanitize=unsigned-integer-overflow
tested with clang and llvm 3.4.2
|
|
Will redo the merge to preserve original commits.
This reverts commit a743d7072d9ccf11f96e3df45f25ad07da6ad9d6.
|
|
and mul operations. Refactored tests into two main cases, and
disabled them on LLVM 2.9, which does not support -fsanitized=*signed-integer-overflow.
|
|
klee: let user override path to runtime library
|
|
* Set the default abbreviation mode to let (ExprSMTLIBPrinter::ABBR_LET)
* Remove the now defunct ExprSMTLIBLetPrinter
* Improve performance of ExprSMTLIBPrinter::scan() by keeping
track of visited Expr to avoid visiting them again
* Rename ExprSMTLIBPrinter::printQuery() to ExprSMTLIBPrinter::printQueryExpr()
|
|
When looking for runtime library, look first
into KLEE_RUNTIME_LIBRARY_PATH environment variable.
This allows to use klee not only in 'hardcoded' environment.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
|
|
Some tools prepend DESTDIR properly, some not. ktest-tool and
klee-stats do not, so 'make install' chokes with an error:
llvm[2]: Installing Release+Asserts /usr/bin/ktest-tool
/usr/bin/install: cannot create regular file '/usr/bin/ktest-tool': Permission denied
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
|
