#===------------------------------------------------------------------------===# # # The KLEE Symbolic Virtual Machine # # This file is distributed under the University of Illinois Open Source # License. See LICENSE.TXT for details. # #===------------------------------------------------------------------------===# ############################################################################### # Minimum CMake version and policies ############################################################################### cmake_minimum_required(VERSION 2.8.12) if (POLICY CMP0054) # FIXME: This is horrible. With the old behaviour, # quoted strings like "MSVC" in if() conditionals # get implicitly dereferenced. The NEW behaviour # doesn't do this but CMP0054 was only introduced # in CMake 3.1 and we support lower versions as the # minimum. We could set NEW here but it would be very # confusing to use NEW for some builds and OLD for others # which could lead to some subtle bugs. Instead when the # minimum version is 3.1 change this policy to NEW and remove # the hacks in place to work around it. cmake_policy(SET CMP0054 OLD) endif() if (POLICY CMP0042) # Enable `MACOSX_RPATH` by default. cmake_policy(SET CMP0042 NEW) endif() # This overrides the default flags for the different CMAKE_BUILD_TYPEs set(CMAKE_USER_MAKE_RULES_OVERRIDE_C "${CMAKE_CURRENT_SOURCE_DIR}/cmake/c_flags_override.cmake") set(CMAKE_USER_MAKE_RULES_OVERRIDE_CXX "${CMAKE_CURRENT_SOURCE_DIR}/cmake/cxx_flags_override.cmake") project(KLEE CXX C) ############################################################################### # Project version ############################################################################### set(KLEE_VERSION_MAJOR 1) set(KLEE_VERSION_MINOR 2) set(KLEE_VERSION_PATCH 0) set(KLEE_VERSION_TWEAK 0) set(KLEE_VERSION "${KLEE_VERSION_MAJOR}.${KLEE_VERSION_MINOR}.${KLEE_VERSION_PATCH}.${KLEE_VERSION_TWEAK}") message(STATUS "KLEE version ${KLEE_VERSION}") set(PACKAGE_STRING "\"KLEE ${KLEE_VERSION}\"") set(PACKAGE_URL "\"https://klee.github.io\"") ################################################################################ # Set various useful variables depending on CMake version ################################################################################ if (("${CMAKE_VERSION}" VERSION_EQUAL "3.2") OR ("${CMAKE_VERSION}" VERSION_GREATER "3.2")) # In CMake >= 3.2 add_custom_command() supports a ``USES_TERMINAL`` argument set(ADD_CUSTOM_COMMAND_USES_TERMINAL_ARG "USES_TERMINAL") else() set(ADD_CUSTOM_COMMAND_USES_TERMINAL_ARG "") endif() ################################################################################ # Sanity check - Disallow building in source. # Otherwise we would overwrite the Makefiles of the old build system. ################################################################################ if ("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}") message(FATAL_ERROR "In source builds are not allowed. You should invoke " "CMake from a different directory.") endif() ################################################################################ # Sanity Check: Check for in source build of the old build system. # Some build files from the old build system could interfere with our build. ################################################################################ set(KLEE_OLD_BUILD_SYSTEM_FILES "include/klee/Config/config.h" "test/lit.site.cfg" ) foreach (legacy_file ${KLEE_OLD_BUILD_SYSTEM_FILES}) if (EXISTS "${CMAKE_SOURCE_DIR}/${legacy_file}") if (EXISTS "${CMAKE_SOURCE_DIR}/.git") set(CLEAN_SRC_DIR_INSTRUCTIONS "The KLEE source tree apears to be a git repository so you can run" " \"git clean -dxn\" to see what files aren't part of the repo and then" " run \"git clean -fdx\" to remove them." ) else() # This is the only reliable way to fix this. set(CLEAN_SRC_DIR_INSTRUCTIONS "The KLEE source tree doesn't appear to be a git repository so you will" " need to download a fresh copy of KLEE's source code." ) endif() message(FATAL_ERROR "\"${CMAKE_SOURCE_DIR}/${legacy_file}\"" " exists in KLEE's source tree. It is likely that the Autoconf/Makefile" " build system was configured to do an in-source build in KLEE's source" " tree. This could cause problems with the CMake build. " ${CLEAN_SRC_DIR_INSTRUCTIONS} " You can then run cmake again." ) endif() endforeach() ################################################################################ # Build type ################################################################################ message(STATUS "CMake generator: ${CMAKE_GENERATOR}") if (DEFINED CMAKE_CONFIGURATION_TYPES) # Multi-configuration build (e.g. Xcode). Here # CMAKE_BUILD_TYPE doesn't matter message(STATUS "Available configurations: ${CMAKE_CONFIGURATION_TYPES}") else() # Single configuration generator (e.g. Unix Makefiles, Ninja) set(available_build_types Debug Release RelWithDebInfo MinSizeRel) if(NOT CMAKE_BUILD_TYPE) message(STATUS "CMAKE_BUILD_TYPE is not set. Setting default") message(STATUS "The available build types are: ${available_build_types}") set(CMAKE_BUILD_TYPE RelWithDebInfo CACHE String "Options are ${available_build_types}" FORCE) # Provide drop down menu options in cmake-gui set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS ${available_build_types}) endif() message(STATUS "Build type: ${CMAKE_BUILD_TYPE}") # Check the selected build type is valid list(FIND available_build_types "${CMAKE_BUILD_TYPE}" _build_type_index) if ("${_build_type_index}" EQUAL "-1") message(FATAL_ERROR "\"${CMAKE_BUILD_TYPE}\" is an invalid build type.\n" "Use one of the following build types ${available_build_types}") endif() endif() ################################################################################ # Add our CMake module directory to the list of module search directories ################################################################################ list(APPEND CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/cmake/modules") ################################################################################ # Assertions ################################################################################ option(ENABLE_KLEE_ASSERTS "Enable KLEE assertions" ON) if (ENABLE_KLEE_ASSERTS) message(STATUS "KLEE assertions enabled") # Assume that -DNDEBUG isn't set. else() message(STATUS "KLEE assertions disabled") list(APPEND KLEE_COMPONENT_CXX_DEFINES "NDEBUG") endif() ################################################################################ # KLEE timestamps ################################################################################ option(KLEE_ENABLE_TIMESTAMP "Add timestamps to KLEE sources" OFF) ################################################################################ # Include useful CMake functions ################################################################################ include(GNUInstallDirs) include(CheckIncludeFile) include(CheckIncludeFileCXX) include(CheckFunctionExists) include(CheckPrototypeDefinition) include("${CMAKE_SOURCE_DIR}/cmake/string_to_list.cmake") include("${CMAKE_SOURCE_DIR}/cmake/klee_component_add_cxx_flag.cmake") include("${CMAKE_SOURCE_DIR}/cmake/add_global_flag.cmake") ################################################################################ # Compiler flags for KLEE components # Subsequent commands will append to these. These are used instead of # directly modifying CMAKE_CXX_FLAGS so that other code can be easily built with # different flags. ################################################################################ set(KLEE_COMPONENT_EXTRA_INCLUDE_DIRS "") set(KLEE_COMPONENT_CXX_DEFINES "") set(KLEE_COMPONENT_CXX_FLAGS "") set(KLEE_SOLVER_LIBRARIES "") set(KLEE_COMPONENT_EXTRA_LIBRARIES "") ################################################################################ # Find LLVM ################################################################################ include(${CMAKE_SOURCE_DIR}/cmake/find_llvm.cmake) set(NEEDED_LLVM_VARS LLVM_PACKAGE_VERSION LLVM_VERSION_MAJOR LLVM_VERSION_MINOR LLVM_VERSION_PATCH LLVM_DEFINITIONS LLVM_ENABLE_ASSERTIONS LLVM_ENABLE_EH LLVM_ENABLE_RTTI LLVM_INCLUDE_DIRS LLVM_LIBRARY_DIRS LLVM_TOOLS_BINARY_DIR TARGET_TRIPLE ) foreach (vname ${NEEDED_LLVM_VARS}) message(STATUS "${vname}: \"${${vname}}\"") if (NOT (DEFINED "${vname}")) message(FATAL_ERROR "${vname} was not defined") endif() endforeach() if (LLVM_ENABLE_ASSERTIONS) # Certain LLVM debugging macros only work when LLVM was built with asserts set(ENABLE_KLEE_DEBUG 1) # for config.h else() unset(ENABLE_KLEE_DEBUG) # for config.h endif() list(APPEND KLEE_COMPONENT_CXX_DEFINES ${LLVM_DEFINITIONS}) list(APPEND KLEE_COMPONENT_EXTRA_INCLUDE_DIRS ${LLVM_INCLUDE_DIRS}) # Find llvm-link set(LLVM_LINK "${LLVM_TOOLS_BINARY_DIR}/llvm-link") if (NOT EXISTS "${LLVM_LINK}") message(FATAL_ERROR "Failed to find llvm-link at \"${LLVM_LINK}\"") endif() # Find llvm-ar set(LLVM_AR "${LLVM_TOOLS_BINARY_DIR}/llvm-ar") if (NOT EXISTS "${LLVM_AR}") message(FATAL_ERROR "Failed to find llvm-ar at \"${LLVM_AR}\"") endif() # Find llvm-as set(LLVM_AS "${LLVM_TOOLS_BINARY_DIR}/llvm-as") if (NOT EXISTS "${LLVM_AS}") message(FATAL_ERROR "Failed to find llvm-as at \"${LLVM_AS}\"") endif() ################################################################################ # Find bitcode compiler ################################################################################ include("${CMAKE_SOURCE_DIR}/cmake/find_bitcode_compiler.cmake") message(STATUS "LLVMCC: ${LLVMCC}") if (NOT EXISTS "${LLVMCC}") message(FATAL_ERROR "Cannot find C bitcode compiler \"${LLVMCC}\"") endif() message(STATUS "LLVMCXX: ${LLVMCXX}") if (NOT EXISTS "${LLVMCXX}") message(FATAL_ERROR "Cannot find C++ bitcode compiler \"${LLVMCXX}\"") endif() ################################################################################ # C++ version ################################################################################ option(USE_CXX11 "Use C++11" OFF) if ("${LLVM_PACKAGE_VERSION}" VERSION_GREATER "3.5.0") message(STATUS "Using LLVM >= 3.5.0. Forcing using C++11") set(USE_CXX11 ON CACHE BOOL "Use C++11" FORCE) endif() if (USE_CXX11) message(STATUS "Enabling C++11") # FIXME: Use CMake's own mechanism for managing C++ version. # Set globally because it is unlikely we would want to compile # using mixed C++ versions. add_global_cxx_flag("-std=c++11" REQUIRED) else() # This is needed because with GCC 6 the default changed from gnu++98 to # gnu++14. add_global_cxx_flag("-std=gnu++98" REQUIRED) endif() ################################################################################ # Warnings ################################################################################ include(${CMAKE_SOURCE_DIR}/cmake/compiler_warnings.cmake) ################################################################################ # Solvers ################################################################################ # STP: Use CMake facility to detect. The user can pass `-DSTP_DIR=` to force # a particular directory. option(ENABLE_SOLVER_STP "Enable STP solver support" OFF) if (ENABLE_SOLVER_STP) message(STATUS "STP solver support enabled") # Although find_package() will set `STP_DIR` for us add it here so that # is displayed in `ccmake` and `cmake-gui`. set(STP_DIR "" CACHE PATH "Path to directory containing STPConfig.cmake") find_package(STP CONFIG) if (STP_FOUND) message(STATUS "Found STP version ${STP_VERSION}") # Try the STP shared library first if ("${STP_SHARED_LIBRARY}" STREQUAL "") # Try the static library instead if ("${STP_STATIC_LIBRARY}" STREQUAL "") message(FATAL_ERROR "Couldn't find STP shared or static library") endif() message(STATUS "Using STP static library") list(APPEND KLEE_SOLVER_LIBRARIES "${STP_STATIC_LIBRARY}") else() message(STATUS "Using STP shared library") list(APPEND KLEE_SOLVER_LIBRARIES "${STP_SHARED_LIBRARY}") endif() list(APPEND KLEE_COMPONENT_EXTRA_INCLUDE_DIRS "${STP_INCLUDE_DIRS}") message(STATUS "STP_DIR: ${STP_DIR}") set(ENABLE_STP 1) # For config.h else() message(FATAL_ERROR "STP not found. Try setting `-DSTP_DIR=/path` where" " `/path` is the directory containing `STPConfig.cmake`") endif() else() message(STATUS "STP solver support disabled") set(ENABLE_STP 0) # For config.h endif() # Z3 option(ENABLE_SOLVER_Z3 "Enable Z3 solver support" OFF) if (ENABLE_SOLVER_Z3) message(STATUS "Z3 solver support enabled") find_package(Z3) if (Z3_FOUND) message(STATUS "Found Z3") set(ENABLE_Z3 1) # For config.h list(APPEND KLEE_COMPONENT_EXTRA_INCLUDE_DIRS ${Z3_INCLUDE_DIRS}) list(APPEND KLEE_SOLVER_LIBRARIES ${Z3_LIBRARIES}) # Check the signature of `Z3_get_error_msg()` set (_old_CMAKE_REQUIRED_LIBRARIES "${CMAKE_REQUIRED_LIBRARIES}") set(CMAKE_REQUIRED_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES} ${Z3_LIBRARIES}) check_prototype_definition(Z3_get_error_msg "Z3_string Z3_get_error_msg(Z3_context c, Z3_error_code err)" "NULL" "${Z3_INCLUDE_DIRS}/z3.h" HAVE_Z3_GET_ERROR_MSG_NEEDS_CONTEXT) set(CMAKE_REQUIRED_LIBRARIES ${_old_CMAKE_REQUIRED_LIBRARIES}) if (HAVE_Z3_GET_ERROR_MSG_NEEDS_CONTEXT) message(STATUS "Z3_get_error_msg requires context") else() message(STATUS "Z3_get_error_msg does not require context") endif() else() message(FATAL_ERROR "Z3 not found.") endif() else() message(STATUS "Z3 solver support disabled") set(ENABLE_Z3 0) # For config.h endif() # metaSMT option(ENABLE_SOLVER_METASMT "Enable metaSMT solver support" OFF) if (ENABLE_SOLVER_METASMT) message(STATUS "metaSMT solver support enabled") set(ENABLE_METASMT 1) include(${CMAKE_SOURCE_DIR}/cmake/find_metasmt.cmake) else() message(STATUS "metaSMT solver support disabled") set(ENABLE_METASMT 0) # For config.h endif() if ((NOT ${ENABLE_Z3}) AND (NOT ${ENABLE_STP}) AND (NOT ${ENABLE_METASMT})) message(FATAL_ERROR "No solver was specified. At least one solver is required." "You should enable a solver by passing one of more the following options" " to cmake:\n" "\"-DENABLE_SOLVER_STP=ON\"\n" "\"-DENABLE_SOLVER_Z3=ON\"\n" "\"-DENABLE_SOLVER_METASMT=ON\"") endif() ############################################################################### # Exception handling ############################################################################### if (NOT LLVM_ENABLE_EH) if (ENABLE_SOLVER_METASMT) message(WARNING "Not disabling exceptions because metaSMT uses them") else() klee_component_add_cxx_flag("-fno-exceptions" REQUIRED) endif() endif() ############################################################################### # RTTI ############################################################################### if (NOT LLVM_ENABLE_RTTI) if (ENABLE_SOLVER_METASMT) message(WARNING "Not disabling RTTI because metaSMT uses them") # FIXME: Should this be FATAL_ERROR rather than ERROR? message(WARNING "This build configuration is not supported and will likely not work." "You should recompile LLVM with RTTI enabled.") else() klee_component_add_cxx_flag("-fno-rtti" REQUIRED) endif() endif() ################################################################################ # Support for compressed logs ################################################################################ find_package(ZLIB) if (${ZLIB_FOUND}) set(HAVE_ZLIB_H 1) # For config.h set(TARGET_LIBS ${TARGET_LIBS} z) list(APPEND KLEE_COMPONENT_EXTRA_LIBRARIES ${ZLIB_LIBRARIES}) list(APPEND KLEE_COMPONENT_EXTRA_INCLUDE_DIRS ${ZLIB_INCLUDE_DIRS}) else() unset(HAVE_ZLIB_H) # For config.h endif() ################################################################################ # TCMalloc support ################################################################################ OPTION(ENABLE_TCMALLOC "Enable TCMalloc support" OFF) if (ENABLE_TCMALLOC) message(STATUS "TCMalloc support enabled") set(TCMALLOC_HEADER "gperftools/malloc_extension.h") check_include_file_cxx("${TCMALLOC_HEADER}" HAVE_GPERFTOOLS_MALLOC_EXTENSION_H) if (${HAVE_GPERFTOOLS_MALLOC_EXTENSION_H}) find_library(TCMALLOC_LIBRARIES NAMES tcmalloc tcmalloc_minimal DOC "TCMalloc libraries" ) if (NOT TCMALLOC_LIBRARIES) message(FATAL_ERROR "Found \"${TCMALLOC_HEADER}\" but could not find library") endif() list(APPEND KLEE_COMPONENT_EXTRA_LIBRARIES ${TCMALLOC_LIBRARIES}) if (("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang") OR ("${CMAKE_CXX_COMPILER_ID}" MATCHES "GNU")) # TCMalloc's documentation says its safest to pass these flags when # building with gcc because gcc can optimize assuming its using its own # malloc. klee_component_add_cxx_flag(-fno-builtin-malloc REQUIRED) klee_component_add_cxx_flag(-fno-builtin-calloc REQUIRED) klee_component_add_cxx_flag(-fno-builtin-realloc REQUIRED) klee_component_add_cxx_flag(-fno-builtin-free REQUIRED) endif() else() message(FATAL_ERROR "Can't find \"${TCMALLOC_HEADER}\"") endif() else() message(STATUS "TCMalloc support disabled") endif() ################################################################################ # Detect libcap ################################################################################ check_include_file("sys/capability.h" HAVE_SYS_CAPABILITY_H) if (HAVE_SYS_CAPABILITY_H) find_library(LIBCAP_LIBRARIES NAMES cap DOC "libcap library" ) if (NOT LIBCAP_LIBRARIES) message(FATAL_ERROR "Found \"sys/capability.h\" but could not find libcap") endif() else() set(LIBCAP_LIBRARIES "") endif() ################################################################################ # Detect libutil ################################################################################ check_include_file("pty.h" HAVE_PTY_H) if (HAVE_PTY_H) find_library(LIBUTIL_LIBRARIES NAMES util DOC "libutil library. Typically part of glibc") if (NOT LIBUTIL_LIBRARIES) message(FATAL_ERROR "Found \"pty.h\" but could not find libutil") endif() endif() ################################################################################ # Miscellaneous header file detection ################################################################################ check_function_exists(mallinfo HAVE_MALLINFO) # FIXME: should test CXX compiler not C check_function_exists(__ctype_b_loc HAVE_CTYPE_EXTERNALS) # FIXME: should test CXX compiler not C check_include_file_cxx(malloc/malloc.h HAVE_MALLOC_MALLOC_H) check_function_exists(malloc_zone_statistics HAVE_MALLOC_ZONE_STATISTICS) # FIXME: This is needed by the runtime not KLEE itself so we are testing the wrong # compiler. check_include_file("selinux/selinux.h" HAVE_SELINUX_SELINUX_H) check_include_file("sys/acl.h" HAVE_SYS_ACL_H) if (HAVE_SELINUX_SELINUX_H) message(STATUS "SELinux support enabled") set(HAVE_SELINUX 1) # Test what function signature we need to use for SELinux. The signatures # have changed between 2.2 and 2.3. In particular, the type of the "security # context" parameter was changed from char * to const char *, with this # patch: [PATCH] Get rid of security_context_t and fix const declarations. # [http://www.spinics.net/lists/selinux/msg14827.html] check_prototype_definition(setcon "int setcon(char* context)" "0" "selinux/selinux.h" SELINUX_SECURITY_CTX_NO_CONST ) if (SELINUX_SECURITY_CTX_NO_CONST) message(STATUS "security_context_t is char*") set(KLEE_SELINUX_CTX_CONST " ") else() check_prototype_definition(setcon "int setcon(const char* context)" "0" "selinux/selinux.h" SELINUX_SECURITY_CTX_WITH_CONST ) if (SELINUX_SECURITY_CTX_WITH_CONST) message(STATUS "security_context_t is const char*") set(KLEE_SELINUX_CTX_CONST "const") else() message(FATAL_ERROR "Failed to determine function signature for \"setcon\"") endif() endif() else() message(STATUS "SELinux support disabled") set(HAVE_SELINUX 0) endif() ################################################################################ # KLEE runtime support ################################################################################ # This is set here and not in `runtime` because `config.h` needs to be generated. set(available_klee_runtime_build_types "Release" "Release+Debug" "Release+Asserts" "Release+Debug+Asserts" "Debug" "Debug+Asserts" ) if (NOT KLEE_RUNTIME_BUILD_TYPE) message(STATUS "KLEE_RUNTIME_BUILD_TYPE is not set. Setting default") message(STATUS "The available runtime build types are: ${available_klee_runtime_build_types}") set(KLEE_RUNTIME_BUILD_TYPE "Release+Debug+Asserts" CACHE String "Options are ${available_klee_runtime_build_types}" FORCE) endif() # Provide drop down menu options in cmake-gui set_property(CACHE KLEE_RUNTIME_BUILD_TYPE PROPERTY STRINGS ${available_klee_runtime_build_types}) message(STATUS "KLEE_RUNTIME_BUILD_TYPE: ${KLEE_RUNTIME_BUILD_TYPE}") set(KLEE_INSTALL_RUNTIME_DIR "${CMAKE_INSTALL_FULL_LIBDIR}/klee/runtime") # Location where KLEE will look for the built runtimes by default. set(KLEE_RUNTIME_DIRECTORY "${CMAKE_BINARY_DIR}/${KLEE_RUNTIME_BUILD_TYPE}/lib") ################################################################################ # KLEE POSIX Runtime Support ################################################################################ option(ENABLE_POSIX_RUNTIME "Enable KLEE's POSIX runtime" OFF) if (ENABLE_POSIX_RUNTIME) message(STATUS "POSIX runtime enabled") if (NOT ENABLE_KLEE_UCLIBC) message(WARNING "Enabling POSIX runtime without klee-uclibc support." "The runtime might not work without it. Pass `-DENABLE_KLEE_UCLIBC=ON`" " to enable klee-uclibc support.") endif() else() message(STATUS "POSIX runtime disabled") endif() ################################################################################ # KLEE uclibc support ################################################################################ option(ENABLE_KLEE_UCLIBC "Enable support for klee-uclibc" OFF) if (ENABLE_KLEE_UCLIBC) message(STATUS "klee-uclibc support enabled") set(SUPPORT_KLEE_UCLIBC 1) # For config.h set(KLEE_UCLIBC_PATH "" CACHE PATH "Path to klee-uclibc root directory") if (NOT IS_DIRECTORY "${KLEE_UCLIBC_PATH}") message(FATAL_ERROR "KLEE_UCLIBC_PATH (\"${KLEE_UCLIBC_PATH}\") is not a valid directory.\n" "Try passing -DKLEE_UCLIBC_PATH= to cmake where is the path" " to the root of the klee-uclibc directory.") endif() # Find the C library bitcode archive set(KLEE_UCLIBC_BCA_NAME "klee-uclibc.bca") set(KLEE_UCLIBC_C_BCA "${KLEE_UCLIBC_PATH}/lib/libc.a") if (NOT EXISTS "${KLEE_UCLIBC_C_BCA}") message(FATAL_ERROR "klee-uclibc library not found at \"${KLEE_UCLIBC_C_BCA}\"") endif() message(STATUS "Found klee-uclibc library: \"${KLEE_UCLIBC_C_BCA}\"") # Make a symlink to KLEE_UCLIBC_C_BCA so KLEE can find it where it # is expected. file(MAKE_DIRECTORY "${KLEE_RUNTIME_DIRECTORY}") execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "${KLEE_UCLIBC_C_BCA}" "${KLEE_RUNTIME_DIRECTORY}/${KLEE_UCLIBC_BCA_NAME}" ) list(APPEND KLEE_COMPONENT_CXX_DEFINES -DKLEE_UCLIBC_BCA_NAME=\"${KLEE_UCLIBC_BCA_NAME}\") # Add klee-uclibc to the install target. We install the original # file rather than the symlink because CMake would just copy the symlink # rather than the file. install(FILES "${KLEE_UCLIBC_C_BCA}" DESTINATION "${KLEE_INSTALL_RUNTIME_DIR}" RENAME "${KLEE_UCLIBC_BCA_NAME}" ) else() message(STATUS "klee-uclibc support disabled") set(SUPPORT_KLEE_UCLIBC 0) # For config.h endif() ################################################################################ # Generate `config.h` ################################################################################ configure_file(${CMAKE_SOURCE_DIR}/include/klee/Config/config.h.cmin ${CMAKE_BINARY_DIR}/include/klee/Config/config.h) ################################################################################ # Generate `CompileTimeInfo.h` ################################################################################ if (EXISTS "${CMAKE_SOURCE_DIR}/.git") # Get information from git. We use third-party code to do this. The nice # thing about this code is it will trigger a re-configure if the HEAD changes # which means when we build KLEE, it should always have the correct git # information. include(${CMAKE_SOURCE_DIR}/cmake/GetGitRevisionDescription.cmake) get_git_head_revision(_NOT_USED_KLEE_GIT_REFSPEC KLEE_GIT_SHA1HASH) message(STATUS "KLEE_GIT_SHA1HASH: ${KLEE_GIT_SHA1HASH}") git_describe(KLEE_GIT_TAG "--tags") message(STATUS "KLEE_GIT_TAG: ${KLEE_GIT_TAG}") else() set(KLEE_GIT_SHA1HASH "unknown") set(KLEE_GIT_TAG "unknown") endif() set(AUTO_GEN_MSG "AUTOMATICALLY GENERATED. DO NOT EDIT!") configure_file(${CMAKE_SOURCE_DIR}/include/klee/Config/CompileTimeInfo.h.cmin ${CMAKE_BINARY_DIR}/include/klee/Config/CompileTimeInfo.h ) ################################################################################ # Global include directories ################################################################################ include_directories("${CMAKE_BINARY_DIR}/include") include_directories("${CMAKE_SOURCE_DIR}/include") ################################################################################ # Set default location for targets in the build directory ################################################################################ set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib) set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib) set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin) ################################################################################ # KLEE components ################################################################################ include("${CMAKE_SOURCE_DIR}/cmake/klee_add_component.cmake") add_subdirectory(lib) add_subdirectory(runtime) ################################################################################ # KLEE tools ################################################################################ add_subdirectory(tools) ################################################################################ # Testing ################################################################################ option(ENABLE_TESTS "Enable tests" ON) if (ENABLE_TESTS) # Find lit set(LIT_TOOL_NAMES "llvm-lit" "lit") find_program( LIT_TOOL NAMES ${LIT_TOOL_NAMES} HINTS "${LLVM_TOOLS_BINARY_DIR}" DOC "Path to lit tool" ) set(LIT_ARGS "-v;-s" CACHE STRING "Lit arguments" ) if ((NOT LIT_TOOL) OR (NOT EXISTS "${LIT_TOOL}")) message(FATAL_ERROR "The lit tool is required for testing." " CMake tried to find lit with the following names \"${LIT_TOOL_NAMES}\"" " but it could not be found.\n" "You should either disable testing by passing \"-DENABLE_TESTS=OFF\" to cmake" " or you should install the lit tool from the Python Package Index by running" " \"pip install lit\". Note \"pip\" requires root privileges to run. If you" " don't have root privileges you can create a virtual python environment using" " the \"virtualenv\" tool and run \"pip\" from there.") else() message(STATUS "Using lit: ${LIT_TOOL}") endif() option(ENABLE_UNIT_TESTS "Enable unittests" ON) if (ENABLE_UNIT_TESTS) message(STATUS "Unit tests enabled") add_subdirectory(unittests) else() message(STATUS "Unit tests disabled") endif() option(ENABLE_INTEGRATION_TESTS "Enable integration tests" ON) if (ENABLE_INTEGRATION_TESTS) message(STATUS "Integration tests enabled") add_subdirectory(test) else() message(STATUS "Integration tests disabled") endif() # Add global test target add_custom_target(check DEPENDS unittests integrationtests COMMENT "Running tests" ) else() message(STATUS "Testing disabled") endif() ################################################################################ # Documentation ################################################################################ option(ENABLE_DOCS "Enable building documentation" ON) if (ENABLE_DOCS) add_subdirectory(docs) endif() ################################################################################ # Miscellaneous install ################################################################################ install(FILES include/klee/klee.h DESTINATION include/klee)