summary refs log tree commit diff
AgeCommit message (Collapse)Author
2022-02-17test: add c[u]od checks to isel2 and add new integer compare test isel3Michael Forney
2022-02-17cfg: remove unnecessary check for jump typeMichael Forney
This condition should match any jump with two successors. This is needed on riscv64, where there is no flags register, so Jjnz is used all the way to emit().
2022-02-17Revert "skip jump arguments in rega"Michael Forney
This reverts commit 028534d9897079bf64559dca0402bc59a956ce46. riscv64 will have jump arguments with type RTmp.
2022-02-17spill: consider jump argument as use of registerMichael Forney
2022-02-11document the automatic use of bssQuentin Carbonneaux
2022-02-11gas: put zero data into .bss by defaultMichael Forney
This allows frontends to use BSS generically, without knowledge of platform-dependent details.
2022-02-11doc: fix name of export linkage flagPaul Ouellette
2022-02-02shared linkage logic for func/dataQuentin Carbonneaux
2022-01-31arm64: handle large slots in OcopyQuentin Carbonneaux
2022-01-31Do not use the asm keyword as a local variableDetlef Riekenberg
Signed-off-by: Detlef Riekenberg <wine.dev@web.de>
2022-01-28amd64/isel: nitsQuentin Carbonneaux
2022-01-28fix test/fpcnv (wrong spacing)Quentin Carbonneaux
2022-01-28update token hash paramsQuentin Carbonneaux
2022-01-28implement float -> unsigned castsBor Grošelj Simić
amd64 lacks instruction for this so it has to be implemented with float -> signed casts. The approach is borrowed from llvm.
2022-01-28implement unsigned -> float castsBor Grošelj Simić
amd64 lacks an instruction for this so it has to be implemented with signed -> float casts: - Word casting is done by zero-extending the word to a long and then doing a regular signed cast. - Long casting is done by dividing by two with correct rounding if the highest bit is set and casting that to float, then adding 1 to mantissa with integer addition
2022-01-23increase token limit to 255Bor Grošelj Simić
2022-01-23bump copyright yearQuentin Carbonneaux
2022-01-23check for fopen() errors for output fileBor Grošelj Simić
2022-01-23Add a negation instructionEyal Sawady
Necessary for floating-point negation, because `%result = sub 0, %operand` doesn't give the correct sign for 0/-0.
2021-12-05arm64: fix slots with offset >32kQuentin Carbonneaux
When slots are used with a large offset, the emitter generates invalid assembly code. That is caught later on by the assembler, but it prevents compilation of programs with large stack frames. When a slot offset is too large to be expressed as a constant offset to x29 (the frame pointer), emitins() inserts a late Oaddr instruction to x16 and replaces the large slot reference with x16. This change also gave me the opportunity to refactor the save/restore logic for callee-save registers. This fixes the following Hare issue: https://todo.sr.ht/~sircmpwn/hare/387
2021-11-22reuse previous address constants in fold()Michael Forney
parseref() has code to reuse address constants, but this is not done in other passes such as fold or isel. Introduce a new function newcon() which takes a Con and returns a Ref for that constant, and use this whenever creating address constants. This is necessary to fix folding of address constants when one operand is already folded. For example, in %a =l add $x, 1 %b =l add %a, 2 %c =w loadw %b %a and %b were folded to $x+1 and $x+3 respectively, but then the second add is visited again since it uses %a. This gets folded to $x+3 as well, but as a new distinct constant. This results in %b getting labeled as bottom instead of either constant, disabling the replacement of %b by a constant in subsequent instructions (such as the loadw).
2021-11-10fold: Prevent error when address is used as operandMichael Forney
2021-11-10bump NStringQuentin Carbonneaux
2021-11-10fold: Don't fold invalid addition/subtraction rather than failingMichael Forney
This may happen in a branch QBE doesn't realize is unreachable, for example (simplified from real code found in ncurses) data $str = { b "abcdef", b 0 } function l $f(w %x) { @start %.1 =w ceqw %x, 0 jnz %.1, @logic_join, @logic_right @logic_right %p =l call $strchr(l $str, w %x) %.2 =w ceql %p, 0 @logic_join %.3 =w phi @start %.1, @logic_right %.2 jnz %.3, @fail, @return @fail ret 0 @return %.4 =l sub %p, $str ret %.4 }
2021-11-08amd64: avoid reading past end of passed structMichael Forney
If the size of the struct is not a multiple of 8, the actual struct size may be different from the size reserved on the stack. This fixes the case where the struct is passed in memory, but we still may over-read a struct passed in registers. A TODO is added for now.
2021-11-08fix for sloppy reg->mem in arm64 abiQuentin Carbonneaux
Michael found a bug where some copies from registers to memory in the arm64 abi clobber the stack. The test case is: type :T = { w } function w $f() { @start %p =:T call $g() %x =w loadw %p ret %x } qbe will write 4 bytes out of bounds when pulling the result struct from its register. The same bug can be observed if :T's definition is {w 3}; in this case qbe writes 16 bytes in a slot of 12 bytes. This patch changes stkblob() to use the rounded argument size if it is going to be restored from registers. Relatedly, mem->reg loads for structs with size < 16 and != 8, are treated a bit sloppily both in the arm64 and in the sysv abis. That is much less harmful than the present bug.
2021-10-28new chacha20 testQuentin Carbonneaux
2021-10-26use unified diff format for test outputMichael Forney
This make it easier to understand the differences.
2021-10-26remove trailing whitespace from test/abi7.ssaMichael Forney
2021-10-26spill: fix regs assertionsQuentin Carbonneaux
Some arm64 abi tests have been failing for some time now. This fixes them by being a bit more careful with liveset management in spill.c. A late bsclr() call in spill.c may drop legitimately live registers in e.g., R12 =w add R12, 1 While it hurts for regs, it does not matter for ssa temps because those cannot be both in the arguments & return (by the ssa invariant). I added a check before bsclr() to make sure we are clearing only ssa temps. One might be surprised that any ssa temp may be live at this point. The reason why this is the case is the special handling of dead return values earlier in spill(). I think that it is the only case where the return value can be (awkwardly) live at the same time as the arguments, and I think this never happens with registers (i.e., we never have dead register- assigning instructions). I added an assert to check the latter invariant. Finally, there was a simple bug in the arm64 abi which I fixed: In case the return happens via a pointer, x8 needs to be marked live at the beginning of the function. This was caught by test/abi4.ssa.
2021-10-26arm64: Add LR to list of registers to saveMichael Forney
Tested-by: Thomas Bracht Laumann Jespersen <t@laumann.xyz> Fixes: https://todo.sr.ht/~sircmpwn/hare/312
2021-10-25arm64/emit.c: fix move instructions with big immediate valuesSudipto Mallick
Fixes #467. It assumes that the stack won't need to grow beyond 2^32 bytes. If that were to happen, we'd need another or at most two more `movk` instructions. Signed-off-by: Sudipto Mallick <smlckz@disroot.org>
2021-10-25arm64: handle copy of constant to slotMichael Forney
If registers spill onto the stack, we may end up with SSA like S320 =l copy 0 after rega(). Handle this case in arm64 emit().
2021-10-25arm64: Handle slots in Ocopy operandsMichael Forney
2021-10-25arm64: handle slotsMichael Forney
2021-10-22make variadic args explicitQuentin Carbonneaux
Some abis, like the riscv one, treat arguments differently depending on whether they are variadic or not. To prepare for the upcomming riscv target, we change the variadic call syntax and give meaning to the location of the '...' marker. # new syntax %ret =w call $f(w %regular, ..., w %variadic) By nature of their abis, the change is backwards compatible for existing targets.
2021-10-17use -static when cross-compiling testsQuentin Carbonneaux
2021-10-17amd64/sysv: unbreak env callsQuentin Carbonneaux
Env calls were disfunctional from the start. This fixes them on amd64, but they remain to do on arm64. A new test shows how to use them.
2021-10-13add size suffix to frame setup.Andrew Chambers
2021-10-11spill: add some comments describing functionsMichael Forney
2021-10-11util: fix typo preventing 4-byte copy in blit()Michael Forney
2021-10-11avoid some one last gcc truncation warningMichael Forney
2021-09-20parse: fix loadw when assigned to l temporaryMichael Forney
The documentation states that loadw is syntactic sugar for loadsw, but it actually got parsed as Oload. If the result is an l temporary, Oload behaves like Oloadl, not Oloadsw. To fix this, parse Tloadw as Oloadsw explicitly.
2021-09-09skip nx stack annotation on osxQuentin Carbonneaux
2021-09-07test: use architecture-neutral wrapper for calling vprintfMichael Forney
Different architectures use different types for va_list: x86_64 uses an 1-length array of struct type[0]: typedef struct { unsigned int gp_offset; unsigned int fp_offset; void *overflow_arg_area; void *reg_save_area; } va_list[1]; aarch64 uses a struct type[1] typedef struct { void *__stack; void *__gr_top; void *__vr_top; int __gr_offs; int __vr_offs; } va_list; Consequently, C functions which takes a va_list as an argument, such as vprintf, may pass va_list in different ways depending on the architecture. On x86_64, va_list is an array type, so parameter decays to a pointer and passing the address of the va_list is correct. On aarch64, the va_list struct is passed by value, but since it is larger than 16 bytes, the parameter is replaced with a pointer to caller-allocated memory. Thus, passing the address as an l argument happens to work. However, this pattern of passing the address of the va_list to vprintf doesn't extend to other architectures. On riscv64, va_list is defined as typedef void *va_list; which is *not* passed by reference. This means that tests that call vprintf using the address of a va_list (vararg1 and vararg2) will not work on riscv. To fix this while keeping the tests architecture-neutral, add a small wrapper function to the driver which takes a va_list *, and let the C compiler deal with the details of passing va_list by value. [0] https://c9x.me/compile/bib/abi-x64.pdf#figure.3.34 [1] https://c9x.me/compile/bib/abi-arm64.pdf#%5B%7B%22num%22%3A63%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C52%2C757%2C0%5D [2] https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-cc.adoc#va_list-va_start-and-va_arg$
2021-09-07test: assign result of print functions to temporaryMichael Forney
Though I am not aware of any architecture where this matters, it is technically incorrect to call these stdio functions as if they had no result. The QBE documentation says > Unless the called function does not return a value, a return > temporary must be specified, even if it is never used afterwards. so we should follow it in the tests as well.
2021-08-30skip jump arguments in regaQuentin Carbonneaux
On both amd64 & arm64, the jumps making it to rega won't have any argument.
2021-08-29amd64/isel: fix floating point == and != result with NaNMichael Forney
On x86_64, ucomis[sd] sets ZF=1, PF=0, CF=0 for equal arguments. However, if the arguments are unordered it sets ZF=1, PF=1, CF=1, and there is no jump/flag instruction for ZF=1 & PF=0 or ZF=1 & CF=0. So, in order to correctly implement ceq[sd] on x86_64, we need to be a bit more creative. There are several options available, depending on whether the result of ceq[sd] is used with jnz, or with other instructions, or both. If the result is used for a conditional jump, both gcc and clang use a combination of jp and jnz: ucomisd %xmm1, %xmm0 jp .Lfalse jnz .Lfalse ... .Lfalse: If the result is used in other instructions or return, gcc does the following for x == y: ucomisd %xmm1, %xmm0 setnp %al movzbl %al, %eax movl $0, %edx cmovne %edx, %eax This sets EAX to PF=0, then uses cmovne to clear it if ZF=0. It also takes care to avoid clobbering the flags register in case the result is also used for a conditional jump. Implementing this approach in QBE would require adding an architecture-specific instruction for cmovne. In contrast, clang does an additional compare, this time using cmpeqsd instead of ucomisd: cmpeqsd %xmm1, %xmm0 movq %xmm0, %rax andl $1, %rax The cmpeqsd instruction doas a floating point equality test, setting XMM0 to all 1s if they are equal and all 0s if they are not. However, we need the result in a non-XMM register, so it moves the result back then masks off all but the first bit. Both of these approaches are a bit awkward to implement in QBE, so instead, this commit does the following: ucomisd %xmm1, %xmm0 setz %al movzbl %al, %eax setnp %cl movzbl %cl, %ecx andl %ecx, %eax This sets the result by anding the two flags, but has a side effect of clobbering the flags register. This was a problem in one of my earlier patches to fix this issue[0], in addition to being more complex than I'd hoped. Instead, this commit always leaves the ceq[sd] instruction in the block, even if the result is only used to control a jump, so that the above instruction sequence is always used. Then, since we now have ZF=!(ZF=1 & PF=0) for x == y, or ZF=!(ZF=0 | PF=1) for x != y, we can use jnz for the jump instruction. [0] https://git.sr.ht/~sircmpwn/qbe/commit/64833841b18c074a23b4a1254625315e05b86658
2021-08-27amd64/isel: fix floating < and <= result with NaNMichael Forney
When the two operands are Unordered (for instance if one of them is NaN), ucomisd sets ZF=1, PF=1, and CF=1. When the result is LessThan, it sets ZF=0, PF=0, and CF=1. However, jb[e]/setb[e] only checks that CF=1 [or ZF=1] which causes the result to be true for unordered operands. To fix this, change the operand swap condition for these two floating point comparison types: always rewrite x < y as y > x, and never rewrite x > y as y < x. Add a test to check the result of cltd, cled, cgtd, cged, ceqd, and cned with arguments that are LessThan, Equal, GreaterThan, and Unordered. Additionally, check three different implementations for equality testing: one that uses the result of ceqd directly, one that uses the result to control a conditional jump, and one that uses the result both as a value and for a conditional jump. For now, unordered equality tests are still broken so they are disabled.
2021-08-23amd64/emit.c: fix %x =k sub %x, %xEyal Sawady
The negate trick is unnecessary and broken when the first arg is the result.