v3.13c release (#951)

* persistent replay env setup

* implementation without testing

* complete implemenation, still no test

* fix

* fixes

* fixes

* documentation for AFL_PERSISTENT_RECORD

* afl-cmin: Allow @@ to be part of an arg

The previous implementation of "@@ handling"
in afl-cmin differed greatly from how it was
handled in afl-fuzz and how the documentation presented it.

It used to require that the @@ be its own argument separated
by whitespace and could not be used in situations like "--file=@@".

This change standardizes it to just look for @@ to be *in* an argument
in the same manner that afl-cmin.bash does, so that it will have
the expected and documented behavior.

* triage_crashes.sh: Allow @@ to be part of an arg

* triage_crashes.sh: Fix error reporting

* afl-showmap: Allow @@ to be part of an arg

The previous implementation of "@@ handling"
in afl-showmap differed greatly from how it was
handled in afl-fuzz and how the documentation presented it.

It used to require that the @@ be its own argument separated
by whitespace and could not be used in situations like "--file=@@".

This change standardizes it to use detect_file_args() like
everybody else does, so that it will have the expected and
documented behavior.

* afl-showmap: Unwind a change to keep it pre-C99 compatible

* v3.13a init

* ifdef for record

* changelog info

* AFL_PERSISTENT_RECORD not a default

* Add support for FRIDA mode

* support libraries for find_afl_binary

* remove warnings

* update dynamic list

* update changelog

* try to trigger github actions

* try to trigger github actions

* android: support host and target 32bit build

* remove InsTrim

* Fix support for afl-cmin and updated README

* integrate frida_mode, code-format

* update README

* Update custom_mutators.md

* fix compilation for llvm 3.8.0

* pass lib -ldl only on Linux platforms

* typos

* simpler argument processing

* -m32 support for docker container

* restructure havoc

* add introspection

* ensure one fuzzer sync per cycle, cycle introspection

* remove unneeded var

* add parallel builds

* add parallel builds

* Add network_proxy build targets to gitignore (#852)

All other build targets in utils/ are ignored except for these due to
the lack of file extension.

* Fixes: 6d2ac3e3140 ("fix grammar download script")

The git submodle entry point is "grammar_mutator" not "grammar-mutator"

The build script fails without this

* fix #if A == B always evalutes to true

* try to avoid CI build failure by updating apt packages

* fix k-ctx

* Initialalize the autodict-ql

Initialalize the autodict-ql
add codeql scripts

* update the codes, readme

- add readme
- add required qlpack.yml

* update readme

update readme

* Update readme

Update readme

* Update readme

Update readme

* rename python file

rename python file

* update

update

* Add shell command

Add shell command

* update readme

update readme

* Add support for standalone leak-sanitizer, introducting the environment
variable AFL_USE_LSAN.

AFL_USE_LSAN introduces the macro __AFL_CHECK_LEAK() which will check
for a memory leak when the macro is run. This is especially helpful
when using __AFL_LOOP().

If __AFL_LEAK_CHECK() is not used when AFL_USE_LSAN=1 is set,
the leak checker will run when the program exits.

* Replace __AFL_CHECK_LEAK with __AFL_LEAK_CHECK to be more proper.

Fix spelling mistakes.

Correctly call LSAN_ERROR not MSAN_ERROR.

* Some updates on readme

Some updates on readme

* Update readme

Update readme

* Updates

update

* finalize 1

commit final things

* space

space

* remove things

remove things

* Add python scripts

Add python scripts

* Update python scripts

Update python scripts

* new commit - change strings

new commit - change strings

* update qlpack name

update qlpack name

* remove unessential things

remove unessential things from scripts

* remove dirs

remove dirs

* Update readme

Update readme

* Add note

Add note

* Add `

Add `

* change cur

change current dir

* Fix typos,
Use symbolize=0 for LSAN,
Remove syntactic sugar.

* Remove check for exit_code on LSAN and replace it with check for
symbolize=0.

* Move definition of __AFL_LEAK_CHECK inside ifguards,
use LSAN_OPTIONS=print_suppressions=0

* revert Heiko's commit

* Fix Haiku references, no <sys/syscall.h> and missing defines for USEMMAP

* cleanup

* Add -lnetwork to dependencies for Haiku

* fix conflict

* Fix undeclared SYS_write on Haiku

* Declare private api __kern_write for Haiku

* better MacOs msg

* Haiku: create directory for debug_server, if not present

* add missing env

* better understandable directory creation logic

* android: disable sigaction inside debuggerd

check https://github.com/google/AFL/blob/master/docs/INSTALL#L173

* fix forkserver timeout error msg

* removed -lc++ linking for lto

* fix afl_custom_queue_new_entry when syncing

* update grammar-mutator, show better fuzzing strategy yields

* Update ideas.md

Hey, I noticed there was a spelling error in above documentation for GSOC '21. I have corrected it, you can have a look at it if you want.

* display dictionary usage in havoc only mode

* ui custom mutator only display

* add AFL_EXIT_ON_SEED_ISSUES

* afl-whatsup -d

* fix alive count in afl-whatsup

* update havoc

* ui update

* fix aflpp qemu hook

* qemu driver new api

* add readme

* update readme

* allow aflpp_qemu_driver_hook.o to fail

* fix writing stat file on exit

* remove duplicate plot file write

* fix warnings

* afl-whatsup -d fix

* fix ui

* update readme

* qemuafl

* fix compcovtest

* fix compcovtest

* fix compcovtest

* cmplog -l3: disable trimming, forcing input2stage for all

* autoformat with black

* fix nits

* Changes following code review

* fix nits

* update docs

* review

* Add newline

Add newline

* Update readme

fix typo in readme

* Add new line

Add new line

* fixes

* fix compcovtest

* fix compcovtest

* code format for frida mode

* reworked formatting in order to avoid gcc 8.3.0 warnings

* add idea of thread-safe target feedback

* fix-typo: "WIn32" -> "Win32"

* fix custom trim for increasing data

* drop support for llvm < 6.0

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

* Push to stable (#895)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>

* Push to stable (#927)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* push to stable (#931)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* Final push to stable (#936)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

* push to stable (#931) (#932)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* improve error msg

* Added documentation for wine LoadLibrary workaround (#933)

* Fix cmake target compilation command example (#934)

- Fix typo DCMAKE_C_COMPILERC -> DCMAKE_C_COMPILER.
- Add `cd build` after `mkdir build`.

* showmap passes queue items in alphabetical order

* added tmp files to gitignore

* lenient dict parsing, no map size enum for binary fuzzing

* added info about showmap queue directions

* update binary-only doc

* turn off map size detection if skip_bin_check is set

* Typo

* update docs

* update afl-system-config

* Set kill signal before using it in afl-showmap (#935)

* fix afl-cc help output

* add libafl to binary-only doc

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>
Co-authored-by: 0x4d5a-ctf <51098072+0x4d5a-ctf@users.noreply.github.com>
Co-authored-by: Tommy Chiang <oToToT@users.noreply.github.com>
Co-authored-by: buherator <buherator@silentsignal.hu>

* final push to stable (really?) (#939)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

* push to stable (#931) (#932)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* improve error msg

* Added documentation for wine LoadLibrary workaround (#933)

* Fix cmake target compilation command example (#934)

- Fix typo DCMAKE_C_COMPILERC -> DCMAKE_C_COMPILER.
- Add `cd build` after `mkdir build`.

* showmap passes queue items in alphabetical order

* added tmp files to gitignore

* lenient dict parsing, no map size enum for binary fuzzing

* added info about showmap queue directions

* update binary-only doc

* turn off map size detection if skip_bin_check is set

* Typo

* update docs

* update afl-system-config

* Set kill signal before using it in afl-showmap (#935)

* fix afl-cc help output

* add libafl to binary-only doc

* update docs

* less executions on variable paths

* AFL_SKIP_CRASHES is obsolete since 3.0

* add AFL_TRY_AFFINITY

* Typo

* Typo

* Typo/wording

* tweaks

* typos

* fix afl-whatsup help output

* fix afl-plot output

* fix for MacOS

* fix cmpcov doc for qemu

* fix tmpfile removal

* update dockerfile

* Frida (#940)

* Added re2 test

* Added libpcap test

* Fix validation of setting of ADDR_NO_RANDOMIZE

* Added support for printing original and instrumented code

Co-authored-by: Your Name <you@example.com>

* Support for AFL_FRIDA_PERSISTENT_RET (#941)

Co-authored-by: Your Name <you@example.com>

* Changes to add missing exclusion of ranges (#943)

Co-authored-by: Your Name <you@example.com>

* add --afl-noopt to afl-cc

* docs: fix link to README in QuickStartGuide (#946)

* Support writing Stalker stats (#945)

* Support writing Stalker stats

* Fixed string handling in print functions

Co-authored-by: Your Name <you@example.com>

* afl-cmin help fix, aflpp_driver - + @@ support

* fix for afl-showmap

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>
Co-authored-by: 0x4d5a-ctf <51098072+0x4d5a-ctf@users.noreply.github.com>
Co-authored-by: Tommy Chiang <oToToT@users.noreply.github.com>
Co-authored-by: buherator <buherator@silentsignal.hu>
Co-authored-by: Dag Heyman Kajevic <dag.heyman@gmail.com>

* Dev (#949)

* use atomic read-modify-write increment for LLVM CLASSIC

* Change other LLVM modes to atomic increments

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* work in progress: not working correctly yet

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* still not working

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* first working NeverZero implementation

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* add some comments

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

* push to stable (#931) (#932)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* improve error msg

* Added documentation for wine LoadLibrary workaround (#933)

* Fix cmake target compilation command example (#934)

- Fix typo DCMAKE_C_COMPILERC -> DCMAKE_C_COMPILER.
- Add `cd build` after `mkdir build`.

* showmap passes queue items in alphabetical order

* added tmp files to gitignore

* lenient dict parsing, no map size enum for binary fuzzing

* added info about showmap queue directions

* update binary-only doc

* turn off map size detection if skip_bin_check is set

* Typo

* update docs

* update afl-system-config

* Set kill signal before using it in afl-showmap (#935)

* fix afl-cc help output

* add libafl to binary-only doc

* update docs

* less executions on variable paths

* AFL_SKIP_CRASHES is obsolete since 3.0

* add AFL_TRY_AFFINITY

* Typo

* Typo

* Typo/wording

* tweaks

* typos

* fix afl-whatsup help output

* fix afl-plot output

* fix for MacOS

* fix cmpcov doc for qemu

* fix tmpfile removal

* update dockerfile

* Frida (#940)

* Added re2 test

* Added libpcap test

* Fix validation of setting of ADDR_NO_RANDOMIZE

* Added support for printing original and instrumented code

Co-authored-by: Your Name <you@example.com>

* Support for AFL_FRIDA_PERSISTENT_RET (#941)

Co-authored-by: Your Name <you@example.com>

* Changes to add missing exclusion of ranges (#943)

Co-authored-by: Your Name <you@example.com>

* add --afl-noopt to afl-cc

* docs: fix link to README in QuickStartGuide (#946)

* Support writing Stalker stats (#945)

* Support writing Stalker stats

* Fixed string handling in print functions

Co-authored-by: Your Name <you@example.com>

* afl-cmin help fix, aflpp_driver - + @@ support

* fix for afl-showmap

* support new env var AFL_LLVM_THREADSAFE_INST to enable atomic counters.
add new test case for that.

* add documentation for AFL_LLVM_THREADSAFE_INST

* add support for AFL_LLVM_THREADSAFE_INST to other LLVM passes

* add missing include for _exit()

* threadsafe doc fixes, code format

* Wording: "never zero" -> NeverZero

* fix afl_custom_post_process with multiple custom mutators

* fix docs

* debug ck_write

* fixed potential diff by 0

* fixes

* fix classic threadsafe counters

Co-authored-by: van Hauser <vh@thc.org>
Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>
Co-authored-by: 0x4d5a-ctf <51098072+0x4d5a-ctf@users.noreply.github.com>
Co-authored-by: Tommy Chiang <oToToT@users.noreply.github.com>
Co-authored-by: buherator <buherator@silentsignal.hu>
Co-authored-by: Dag Heyman Kajevic <dag.heyman@gmail.com>

* v3.13c release (#950)

* use atomic read-modify-write increment for LLVM CLASSIC

* Change other LLVM modes to atomic increments

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* work in progress: not working correctly yet

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* still not working

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* first working NeverZero implementation

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* add some comments

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

* push to stable (#931) (#932)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* improve error msg

* Added documentation for wine LoadLibrary workaround (#933)

* Fix cmake target compilation command example (#934)

- Fix typo DCMAKE_C_COMPILERC -> DCMAKE_C_COMPILER.
- Add `cd build` after `mkdir build`.

* showmap passes queue items in alphabetical order

* added tmp files to gitignore

* lenient dict parsing, no map size enum for binary fuzzing

* added info about showmap queue directions

* update binary-only doc

* turn off map size detection if skip_bin_check is set

* Typo

* update docs

* update afl-system-config

* Set kill signal before using it in afl-showmap (#935)

* fix afl-cc help output

* add libafl to binary-only doc

* update docs

* less executions on variable paths

* AFL_SKIP_CRASHES is obsolete since 3.0

* add AFL_TRY_AFFINITY

* Typo

* Typo

* Typo/wording

* tweaks

* typos

* fix afl-whatsup help output

* fix afl-plot output

* fix for MacOS

* fix cmpcov doc for qemu

* fix tmpfile removal

* update dockerfile

* Frida (#940)

* Added re2 test

* Added libpcap test

* Fix validation of setting of ADDR_NO_RANDOMIZE

* Added support for printing original and instrumented code

Co-authored-by: Your Name <you@example.com>

* Support for AFL_FRIDA_PERSISTENT_RET (#941)

Co-authored-by: Your Name <you@example.com>

* Changes to add missing exclusion of ranges (#943)

Co-authored-by: Your Name <you@example.com>

* add --afl-noopt to afl-cc

* docs: fix link to README in QuickStartGuide (#946)

* Support writing Stalker stats (#945)

* Support writing Stalker stats

* Fixed string handling in print functions

Co-authored-by: Your Name <you@example.com>

* afl-cmin help fix, aflpp_driver - + @@ support

* fix for afl-showmap

* support new env var AFL_LLVM_THREADSAFE_INST to enable atomic counters.
add new test case for that.

* add documentation for AFL_LLVM_THREADSAFE_INST

* add support for AFL_LLVM_THREADSAFE_INST to other LLVM passes

* add missing include for _exit()

* threadsafe doc fixes, code format

* Wording: "never zero" -> NeverZero

* fix afl_custom_post_process with multiple custom mutators

* fix docs

* debug ck_write

* fixed potential diff by 0

* fixes

* fix classic threadsafe counters

* v3.13c release

Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>
Co-authored-by: 0x4d5a-ctf <51098072+0x4d5a-ctf@users.noreply.github.com>
Co-authored-by: Tommy Chiang <oToToT@users.noreply.github.com>
Co-authored-by: buherator <buherator@silentsignal.hu>
Co-authored-by: Dag Heyman Kajevic <dag.heyman@gmail.com>

Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Jiangen Jiao <joeyjiaojg@qq.com>
Co-authored-by: Yong-Hao Zou <yonghaoz1994@gmail.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: R. Elliott Childre <elliottchildre329@gmail.com>
Co-authored-by: microsvuln <55649192+Microsvuln@users.noreply.github.com>
Co-authored-by: Joshua Rogers <jrogers@opera.com>
Co-authored-by: begasus <begasus@gmail.com>
Co-authored-by: Ujjwal Kirti <64329707+ujjwalkirti@users.noreply.github.com>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: veritas501 <hxzene@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>
Co-authored-by: 0x4d5a-ctf <51098072+0x4d5a-ctf@users.noreply.github.com>
Co-authored-by: Tommy Chiang <oToToT@users.noreply.github.com>
Co-authored-by: buherator <buherator@silentsignal.hu>
Co-authored-by: Dag Heyman Kajevic <dag.heyman@gmail.com>

12 files changed, 208 insertions, 144 deletions

diff --git a/docs/Changelog.md b/docs/Changelog.md
index 5b7d6ab6..1887c099 100644
--- a/docs/Changelog.md
+++ b/docs/Changelog.md
@@ -8,6 +8,63 @@
 Want to stay in the loop on major new features? Join our mailing list by
 sending a mail to <afl-users+subscribe@googlegroups.com>.
 
+### Version ++3.13c (release)
+  - Note: plot_data switched to relative time from unix time in 3.10
+  - frida_mode - new mode that uses frida to fuzz binary-only targets,
+    it currently supports persistent mode and cmplog.
+    thanks to @WorksButNotTested!
+  - create a fuzzing dictionary with the help of CodeQL thanks to
+    @microsvuln! see utils/autodict_ql
+  - afl-fuzz:
+    - added patch by @realmadsci to support @@ as part of command line
+      options, e.g. `afl-fuzz ... -- ./target --infile=@@`
+    - add recording of previous fuzz attempts for persistent mode
+      to allow replay of non-reproducable crashes, see
+      AFL_PERSISTENT_RECORD in config.h and docs/envs.h
+    - fixed a bug when trimming for stdin targets
+    - cmplog -l: default cmplog level is now 2, better efficiency.
+      level 3 now performs redqueen on everything. use with care.
+    - better fuzzing strategy yield display for enabled options
+    - ensure one fuzzer sync per cycle
+    - fix afl_custom_queue_new_entry original file name when syncing
+      from fuzzers
+    - fixed a crash when more than one custom mutator was used together
+      with afl_custom_post_process
+    - on a crashing seed potentially the wrong input was disabled
+    - added AFL_EXIT_ON_SEED_ISSUES env that will exit if a seed in
+      -i dir crashes the target or results in a timeout. By default
+      afl++ ignores these and uses them for splicing instead.
+    - added AFL_EXIT_ON_TIME env that will make afl-fuzz exit fuzzing
+      after no new paths have been found for n seconds
+    - when AFL_FAST_CAL is set a variable path will now be calibrated
+      8 times instead of originally 40. Long calibration is now 20.
+    - added AFL_TRY_AFFINITY to try to bind to CPUs but don't error if
+      it fails
+  - afl-cc:
+    - We do not support llvm versions prior 6.0 anymore
+    - added thread safe counters to all modes (`AFL_LLVM_THREADSAFE_INST`),
+      note that this disables NeverZero counters.
+    - Fix for -pie compiled binaries with default afl-clang-fast PCGUARD
+    - Leak Sanitizer (AFL_USE_LSAN) added by Joshua Rogers, thanks!
+    - Removed InsTrim instrumentation as it is not as good as PCGUARD
+    - Removed automatic linking with -lc++ for LTO mode
+    - Fixed a crash in llvm dict2file when a strncmp length was -1
+    - added --afl-noopt support
+  - utils/aflpp_driver:
+    - aflpp_qemu_driver_hook fixed to work with qemu_mode
+    - aflpp_driver now compiled with -fPIC
+  - unicornafl:
+    - fix MIPS delay slot caching, thanks @JackGrence
+    - fixed aarch64 exit address
+    - execution no longer stops at address 0x0
+  - updated afl-system-config to support Arch Linux weirdness and increase
+    MacOS shared memory
+  - updated the grammar custom mutator to the newest version
+  - add -d (add dead fuzzer stats) to afl-whatsup
+  - added AFL_PRINT_FILENAMES to afl-showmap/cmin to print the
+    current filename
+  - afl-showmap/cmin will now process queue items in alphabetical order
+
 ### Version ++3.12c (release)
   - afl-fuzz:
     - added AFL_TARGET_ENV variable to pass extra env vars to the target
diff --git a/docs/INSTALL.md b/docs/INSTALL.md
index e3c06c9d..80d452f7 100644
--- a/docs/INSTALL.md
+++ b/docs/INSTALL.md
@@ -103,6 +103,41 @@ The llvm instrumentation requires a fully-operational installation of clang. The
 comes with Xcode is missing some of the essential headers and helper tools.
 See README.llvm.md for advice on how to build the compiler from scratch.
 
+MacOS X supports SYSV shared memory used by AFL's instrumentation, but the
+default settings aren't usable with AFL++. The default settings on 10.14 seem
+to be:
+
+```bash
+$ ipcs -M
+IPC status from <running system> as of XXX
+shminfo:
+        shmmax: 4194304 (max shared memory segment size)
+        shmmin:       1 (min shared memory segment size)
+        shmmni:      32 (max number of shared memory identifiers)
+        shmseg:       8 (max shared memory segments per process)
+        shmall:    1024 (max amount of shared memory in pages)
+```
+
+To temporarily change your settings to something minimally usable with AFL++,
+run these commands as root:
+
+```bash
+sysctl kern.sysv.shmmax=8388608
+sysctl kern.sysv.shmall=4096
+```
+
+If you're running more than one instance of AFL you likely want to make `shmall`
+bigger and increase `shmseg` as well:
+
+```bash
+sysctl kern.sysv.shmmax=8388608
+sysctl kern.sysv.shmseg=48
+sysctl kern.sysv.shmall=98304
+```
+
+See http://www.spy-hill.com/help/apple/SharedMemory.html for documentation for
+these settings and how to make them permanent.
+
 ## 4. Linux or *BSD on non-x86 systems
 
 Standard build will fail on non-x86 systems, but you should be able to
diff --git a/docs/PATCHES.md b/docs/PATCHES.md
deleted file mode 100644
index b2cff43a..00000000
--- a/docs/PATCHES.md
+++ /dev/null
@@ -1,43 +0,0 @@
-# Applied Patches
-
-The following patches from https://github.com/vanhauser-thc/afl-patches
-have been installed or not installed:
-
-
-## INSTALLED
-```
-afl-llvm-fix.diff			by kcwu(at)csie(dot)org
-afl-sort-all_uniq-fix.diff		by legarrec(dot)vincent(at)gmail(dot)com
-laf-intel.diff				by heiko(dot)eissfeldt(at)hexco(dot)de
-afl-llvm-optimize.diff			by mh(at)mh-sec(dot)de
-afl-fuzz-tmpdir.diff			by mh(at)mh-sec(dot)de
-afl-fuzz-79x24.diff			by heiko(dot)eissfeldt(at)hexco(dot)de
-afl-fuzz-fileextensionopt.diff		tbd
-afl-as-AFL_INST_RATIO.diff		by legarrec(dot)vincent(at)gmail(dot)com
-afl-qemu-ppc64.diff			by william(dot)barsse(at)airbus(dot)com
-afl-qemu-optimize-entrypoint.diff	by mh(at)mh-sec(dot)de
-afl-qemu-speed.diff			by abiondo on github
-afl-qemu-optimize-map.diff		by mh(at)mh-sec(dot)de
-```
-
-+ llvm_mode ngram prev_loc coverage (github.com/adrianherrera/afl-ngram-pass)
-+ Custom mutator (native library) (by kyakdan)
-+ unicorn_mode (modernized and updated by domenukk)
-+ instrim (https://github.com/csienslab/instrim) was integrated
-+ MOpt (github.com/puppet-meteor/MOpt-AFL) was imported
-+ AFLfast additions (github.com/mboehme/aflfast) were incorporated.
-+ Qemu 3.1 upgrade with enhancement patches (github.com/andreafioraldi/afl)
-+ Python mutator modules support (github.com/choller/afl)
-+ Instrument file list in LLVM mode (github.com/choller/afl)
-+ forkserver patch for afl-tmin (github.com/nccgroup/TriforceAFL)
-
-
-## NOT INSTALLED
-
-```
-afl-fuzz-context_sensitive.diff	- changes too much of the behaviour
-afl-tmpfs.diff - same as afl-fuzz-tmpdir.diff but more complex
-afl-cmin-reduce-dataset.diff - unsure of the impact
-afl-llvm-fix2.diff - not needed with the other patches
-```
-
diff --git a/docs/QuickStartGuide.md b/docs/QuickStartGuide.md
index 10be409a..d1966170 100644
--- a/docs/QuickStartGuide.md
+++ b/docs/QuickStartGuide.md
@@ -1,6 +1,6 @@
 # AFL quick start guide
 
-You should read [README.md](README.md) - it's pretty short. If you really can't, here's
+You should read [README.md](../README.md) - it's pretty short. If you really can't, here's
 how to hit the ground running:
 
 1) Compile AFL with 'make'. If build fails, see [INSTALL.md](INSTALL.md) for tips.
diff --git a/docs/binaryonly_fuzzing.md b/docs/binaryonly_fuzzing.md
index 787d970d..11e1dbeb 100644
--- a/docs/binaryonly_fuzzing.md
+++ b/docs/binaryonly_fuzzing.md
@@ -41,6 +41,33 @@
 
   As it is included in afl++ this needs no URL.
 
+  If you like to code a customized fuzzer without much work, we highly
+  recommend to check out our sister project libafl which will support QEMU
+  too:
+  [https://github.com/AFLplusplus/LibAFL](https://github.com/AFLplusplus/LibAFL)
+
+
+## AFL FRIDA
+
+  In frida_mode you can fuzz binary-only targets easily like with QEMU,
+  with the advantage that frida_mode also works on MacOS (both intel and M1).
+
+  If you want to fuzz a binary-only library then you can fuzz it with
+  frida-gum via utils/afl_frida/, you will have to write a harness to
+  call the target function in the library, use afl-frida.c as a template.
+
+  Both come with afl++ so this needs no URL.
+
+  You can also perform remote fuzzing with frida, e.g. if you want to fuzz
+  on iPhone or Android devices, for this you can use
+  [https://github.com/ttdennis/fpicker/](https://github.com/ttdennis/fpicker/)
+  as an intermediate that uses afl++ for fuzzing.
+
+  If you like to code a customized fuzzer without much work, we highly
+  recommend to check out our sister project libafl which supports Frida too:
+  [https://github.com/AFLplusplus/LibAFL](https://github.com/AFLplusplus/LibAFL)
+  Working examples already exist :-)
+
 
 ## WINE+QEMU
 
@@ -62,13 +89,6 @@
   As it is included in afl++ this needs no URL.
 
 
-## AFL FRIDA
-
-   If you want to fuzz a binary-only shared library then you can fuzz it with
-   frida-gum via utils/afl_frida/, you will have to write a harness to
-   call the target function in the library, use afl-frida.c as a template.
-
-
 ## AFL UNTRACER
 
    If you want to fuzz a binary-only shared library then you can fuzz it with
@@ -157,19 +177,6 @@
   If anyone finds any coresight implementation for afl please ping me: vh@thc.org
 
 
-## FRIDA
-
-  Frida is a dynamic instrumentation engine like Pintool, Dyninst and Dynamorio.
-  What is special is that it is written Python, and scripted with Javascript.
-  It is mostly used to reverse binaries on mobile phones however can be used
-  everywhere.
-
-  There is a WIP fuzzer available at [https://github.com/andreafioraldi/frida-fuzzer](https://github.com/andreafioraldi/frida-fuzzer)
-
-  There is also an early implementation in an AFL++ test branch:
-  [https://github.com/AFLplusplus/AFLplusplus/tree/frida](https://github.com/AFLplusplus/AFLplusplus/tree/frida)
-
-
 ## PIN & DYNAMORIO
 
   Pintool and Dynamorio are dynamic instrumentation engines, and they can be
@@ -205,7 +212,8 @@
   * QSYM: [https://github.com/sslab-gatech/qsym](https://github.com/sslab-gatech/qsym)
   * Manticore: [https://github.com/trailofbits/manticore](https://github.com/trailofbits/manticore)
   * S2E: [https://github.com/S2E](https://github.com/S2E)
-  * Tinyinst [https://github.com/googleprojectzero/TinyInst](https://github.com/googleprojectzero/TinyInst) (Mac/Windows only)
+  * Tinyinst: [https://github.com/googleprojectzero/TinyInst](https://github.com/googleprojectzero/TinyInst) (Mac/Windows only)
+  * Jackalope: [https://github.com/googleprojectzero/Jackalope](https://github.com/googleprojectzero/Jackalope)
   *  ... please send me any missing that are good
 
 
diff --git a/docs/custom_mutators.md b/docs/custom_mutators.md
index 61d711e4..129d6676 100644
--- a/docs/custom_mutators.md
+++ b/docs/custom_mutators.md
@@ -89,11 +89,14 @@ def queue_get(filename):
 
 def queue_new_entry(filename_new_queue, filename_orig_queue):
     pass
-```
 
 def introspection():
     return string
 
+def deinit():  # optional for Python
+    pass
+```
+
 ### Custom Mutation
 
 - `init`:
@@ -120,6 +123,7 @@ def introspection():
     Note that this function is optional - but it makes sense to use it.
     You would only skip this if `post_process` is used to fix checksums etc.
     so if you are using it e.g. as a post processing library.
+    Note that a length > 0 *must* be returned!
 
 - `describe` (optional):
 
@@ -285,8 +289,8 @@ afl-fuzz /path/to/program
 
 ## 4) Example
 
-Please see [example.c](../utils/custom_mutators/example.c) and
-[example.py](../utils/custom_mutators/example.py)
+Please see [example.c](../custom_mutators/examples/example.c) and
+[example.py](../custom_mutators/examples/example.py)
 
 ## 5) Other Resources
 
diff --git a/docs/env_variables.md b/docs/env_variables.md
index 409425f1..38a67bc7 100644
--- a/docs/env_variables.md
+++ b/docs/env_variables.md
@@ -55,7 +55,7 @@ make fairly broad use of environmental variables instead:
     overridden.
 
   - Setting `AFL_USE_ASAN` automatically enables ASAN, provided that your
-    compiler supports that. Note that fuzzing with ASAN is mildly challenging
+    compiler supports it. Note that fuzzing with ASAN is mildly challenging
     - see [notes_for_asan.md](notes_for_asan.md).
 
     (You can also enable MSAN via `AFL_USE_MSAN`; ASAN and MSAN come with the
@@ -64,6 +64,13 @@ make fairly broad use of environmental variables instead:
     there is the Control Flow Integrity sanitizer that can be activated by
     `AFL_USE_CFISAN=1`)
 
+  - Setting `AFL_USE_LSAN` automatically enables Leak-Sanitizer, provided
+    that your compiler supports it. To perform a leak check within your
+    program at a certain point (such as at the end of an __AFL_LOOP),
+    you can run the macro __AFL_LEAK_CHECK(); which will cause
+    an abort if any memory is leaked (you can combine this with the
+    LSAN_OPTIONS=suppressions option to supress some known leaks).
+
   - Setting `AFL_CC`, `AFL_CXX`, and `AFL_AS` lets you use alternate downstream
     compilation tools, rather than the default 'clang', 'gcc', or 'as' binaries
     in your `$PATH`.
@@ -130,16 +137,15 @@ Then there are a few specific features that are only available in instrumentatio
         PCGUARD - our own pcgard based instrumentation (default)
         NATIVE - clang's original pcguard based instrumentation
         CLASSIC - classic AFL (map[cur_loc ^ prev_loc >> 1]++) (default)
-        CFG - InsTrim instrumentation (see below)
         LTO - LTO instrumentation (see below)
         CTX - context sensitive instrumentation (see below)
         NGRAM-x - deeper previous location coverage (from NGRAM-2 up to NGRAM-16)
         GCC - outdated gcc instrumentation
         CLANG - outdated clang instrumentation
-      In CLASSIC (default) and CFG/INSTRIM you can also specify CTX and/or
-      NGRAM, seperate the options with a comma "," then, e.g.:
-        `AFL_LLVM_INSTRUMENT=CFG,CTX,NGRAM-4`
-      Not that this is a good idea to use both CTX and NGRAM :)
+      In CLASSIC you can also specify CTX and/or NGRAM, seperate the options
+      with a comma "," then, e.g.:
+        `AFL_LLVM_INSTRUMENT=CLASSIC,CTX,NGRAM-4`
+      Note that this is actually not a good idea to use both CTX and NGRAM :)
 
 ### LTO
 
@@ -173,24 +179,6 @@ Then there are a few specific features that are only available in instrumentatio
 
   See [instrumentation/README.lto.md](../instrumentation/README.lto.md) for more information.
 
-### INSTRIM
-
-  This feature increases the speed by ~15% without any disadvantages to the
-    classic instrumentation.
-
-  Note that there is also an LTO version (if you have llvm 11 or higher) -
-    that is the best instrumentation we have. Use `afl-clang-lto` to activate.
-    The InsTrim LTO version additionally has all the options and features of
-    LTO (see above).
-
-   - Setting `AFL_LLVM_INSTRIM` or `AFL_LLVM_INSTRUMENT=CFG` activates this mode
-
-   - Setting `AFL_LLVM_INSTRIM_LOOPHEAD=1` expands on INSTRIM to optimize loops.
-      afl-fuzz will only be able to see the path the loop took, but not how
-      many times it was called (unless it is a complex loop).
-
-  See [instrumentation/README.instrim.md](../instrumentation/README.instrim.md)
-
 ### NGRAM
 
    - Setting `AFL_LLVM_NGRAM_SIZE` or `AFL_LLVM_INSTRUMENT=NGRAM-{value}`
@@ -243,6 +231,12 @@ Then there are a few specific features that are only available in instrumentatio
 
   See [instrumentation/README.instrument_list.md](../instrumentation/README.instrument_list.md) for more information.
 
+### Thread safe instrumentation counters (in all modes)
+
+   - Setting `AFL_LLVM_THREADSAFE_INST` will inject code that implements thread
+     safe counters. The overhead is a little bit higher compared to the older
+     non-thread safe case. Note that this disables neverzero (see below).
+
 ### NOT_ZERO
 
    - Setting `AFL_LLVM_NOT_ZERO=1` during compilation will use counters
@@ -296,6 +290,13 @@ checks or alter some of the more exotic semantics of the tool:
     normally indicated by the cycle counter in the UI turning green. May be
     convenient for some types of automated jobs.
 
+  - `AFL_EXIT_ON_TIME` Causes afl-fuzz to terminate if no new paths were 
+    found within a specified period of time (in seconds). May be convenient 
+    for some types of automated jobs.
+
+  - `AFL_EXIT_ON_SEED_ISSUES` will restore the vanilla afl-fuzz behaviour
+    which does not allow crashes or timeout seeds in the initial -i corpus.
+
   - `AFL_MAP_SIZE` sets the size of the shared map that afl-fuzz, afl-showmap,
     afl-tmin and afl-analyze create to gather instrumentation data from
     the target. This must be equal or larger than the size the target was
@@ -317,14 +318,12 @@ checks or alter some of the more exotic semantics of the tool:
     on Linux systems. This slows things down, but lets you run more instances
     of afl-fuzz than would be prudent (if you really want to).
 
+  - Setting `AFL_TRY_AFFINITY` tries to attempt binding to a specific CPU core
+    on Linux systems, but will not terminate if that fails.
+
   - Setting `AFL_NO_AUTODICT` will not load an LTO generated auto dictionary
     that is compiled into the target.
 
-  - `AFL_SKIP_CRASHES` causes AFL++ to tolerate crashing files in the input
-    queue. This can help with rare situations where a program crashes only
-    intermittently, but it's not really recommended under normal operating
-    conditions.
-
   - Setting `AFL_HANG_TMOUT` allows you to specify a different timeout for
     deciding if a particular test case is a "hang". The default is 1 second
     or the value of the `-t` parameter, whichever is larger. Dialing the value
@@ -360,6 +359,7 @@ checks or alter some of the more exotic semantics of the tool:
     and shell scripts; and `AFL_DUMB_FORKSRV` in conjunction with the `-n`
     setting to instruct afl-fuzz to still follow the fork server protocol
     without expecting any instrumentation data in return.
+    Note that this also turns off auto map size detection.
 
   - When running in the `-M` or `-S` mode, setting `AFL_IMPORT_FIRST` causes the
     fuzzer to import test cases from other instances before doing anything
@@ -391,7 +391,8 @@ checks or alter some of the more exotic semantics of the tool:
     may complain of high load prematurely, especially on systems with low core
     counts. To avoid the alarming red color, you can set `AFL_NO_CPU_RED`.
 
-  - In QEMU mode (-Q), `AFL_PATH` will be searched for afl-qemu-trace.
+  - In QEMU mode (-Q) and Frida mode (-O), `AFL_PATH` will
+    be searched for afl-qemu-trace and afl-frida-trace.so.
 
   - In QEMU mode (-Q), setting `AFL_QEMU_CUSTOM_BIN` cause afl-fuzz to skip
     prepending `afl-qemu-trace` to your command line. Use this if you wish to use a
@@ -424,6 +425,16 @@ checks or alter some of the more exotic semantics of the tool:
   - Setting `AFL_FORCE_UI` will force painting the UI on the screen even if
     no valid terminal was detected (for virtual consoles)
 
+  - If you are using persistent mode (you should, see [instrumentation/README.persistent_mode.md](instrumentation/README.persistent_mode.md))
+    some targets keep inherent state due which a detected crash testcase does
+    not crash the target again when the testcase is given. To be able to still
+    re-trigger these crashes you can use the `AFL_PERSISTENT_RECORD` variable
+    with a value of how many previous fuzz cases to keep prio a crash.
+    if set to e.g. 10, then the 9 previous inputs are written to
+    out/default/crashes as RECORD:000000,cnt:000000 to RECORD:000000,cnt:000008
+    and RECORD:000000,cnt:000009 being the crash case.
+    NOTE: This option needs to be enabled in config.h first!
+
   - If you are Jakub, you may need `AFL_I_DONT_CARE_ABOUT_MISSING_CRASHES`.
     Others need not apply, unless they also want to disable the
     `/proc/sys/kernel/core_pattern` check.
@@ -561,6 +572,9 @@ The corpus minimization script offers very little customization:
     a modest security risk on multi-user systems with rogue users, but should
     be safe on dedicated fuzzing boxes.
 
+  - `AFL_PRINT_FILENAMES` prints each filename to stdout, as it gets processed.
+    This can help when embedding `afl-cmin` or `afl-showmap` in other scripts scripting.
+
 ## 7) Settings for afl-tmin
 
 Virtually nothing to play with. Well, in QEMU mode (`-Q`), `AFL_PATH` will be
@@ -614,7 +628,7 @@ optimal values if not already present in the environment:
     override this by setting `LD_BIND_LAZY` beforehand, but it is almost
     certainly pointless.
 
-  - By default, `ASAN_OPTIONS` are set to:
+  - By default, `ASAN_OPTIONS` are set to (among others):
 ```
     abort_on_error=1
     detect_leaks=0
@@ -635,7 +649,14 @@ optimal values if not already present in the environment:
     msan_track_origins=0
     allocator_may_return_null=1
 ```
-  Be sure to include the first one when customizing anything, since some
-    MSAN versions don't call `abort()` on error, and we need a way to detect
-    faults.
+  - Similarly, the default `LSAN_OPTIONS` are set to:
+```
+    exit_code=23
+    fast_unwind_on_malloc=0
+    symbolize=0
+    print_suppressions=0
+```
+  Be sure to include the first ones for LSAN and MSAN when customizing
+     anything, since some MSAN and LSAN versions don't call `abort()` on
+     error, and we need a way to detect faults.
 
diff --git a/docs/ideas.md b/docs/ideas.md
index 0130cf61..e25d3ba6 100644
--- a/docs/ideas.md
+++ b/docs/ideas.md
@@ -3,42 +3,6 @@
 In the following, we describe a variety of ideas that could be implemented
 for future AFL++ versions.
 
-# GSoC 2021
-
-All GSoC 2021 projects will be in the Rust development language!
-
-## UI for libaflrs
-
-Write a user interface to libaflrs, the upcoming backend of afl++.
-This might look like the afl-fuzz UI, but you can improve on it - and should!
-
-## Schedulers for libaflrs
-
-Schedulers is a mechanism that selects items from the fuzzing corpus based
-on strategy and randomness. One scheduler might focus on long paths,
-another on rarity of edges disocvered, still another on a combination on
-things. Some of the schedulers in afl++ have to be ported, but you are free
-to come up with your own if you want to - and see how it performs.
-
-## Forkserver support for libaflrs
-
-The current libaflrs implementation fuzzes in-memory, however obviously we
-want to support afl instrumented binaries as well.
-Hence a forkserver support needs to be implemented - forking off the target
-and talking to the target via a socketpair and the communication protocol
-within.
-
-## More Observers for libaflrs
-
-An observer is measuring functionality that looks at the target being fuzzed
-and documents something about it. In traditional fuzzing this is the coverage
-in the target, however we want to add various more observers, e.g. stack depth,
-heap usage, etc. - this is a topic for an experienced Rust developer.
-
-# Generic ideas and wishlist - NOT PART OF GSoC 2021 !
-
-The below list is not part of GSoC 2021.
-
 ## Analysis software
 
 Currently analysis is done by using afl-plot, which is rather outdated.
@@ -65,6 +29,13 @@ the current Unicorn instrumentation.
 
 Mentor: any
 
+## Support other programming languages
+
+Other programming languages also use llvm hence they could (easily?) supported
+for fuzzing, e.g. mono, swift, go, kotlin native, fortran, ...
+
+Mentor: vanhauser-thc
+
 ## Machine Learning
 
 Something with machine learning, better than [NEUZZ](https://github.com/dongdongshe/neuzz) :-)
diff --git a/docs/life_pro_tips.md b/docs/life_pro_tips.md
index 50ad75d4..13ffcea0 100644
--- a/docs/life_pro_tips.md
+++ b/docs/life_pro_tips.md
@@ -83,5 +83,5 @@ You can find a simple solution in utils/argv_fuzzing.
 ## Attacking a format that uses checksums? 
 
 Remove the checksum-checking code or use a postprocessor!
-See utils/custom_mutators/ for more.
+See `afl_custom_post_process` in custom_mutators/examples/example.c for more.
 
diff --git a/docs/notes_for_asan.md b/docs/notes_for_asan.md
index 2b3bc028..f55aeaf2 100644
--- a/docs/notes_for_asan.md
+++ b/docs/notes_for_asan.md
@@ -28,6 +28,13 @@ Note that ASAN is incompatible with -static, so be mindful of that.
 
 (You can also use AFL_USE_MSAN=1 to enable MSAN instead.)
 
+When compiling with AFL_USE_LSAN, the leak sanitizer will normally run
+when the program exits. In order to utilize this check at different times,
+such as at the end of a loop, you may use the macro __AFL_LEAK_CHECK();.
+This macro will report a crash in afl-fuzz if any memory is left leaking
+at this stage. You can also use LSAN_OPTIONS and a supressions file
+for more fine-tuned checking, however make sure you keep exitcode=23.
+
 NOTE: if you run several secondary instances, only one should run the target
 compiled with ASAN (and UBSAN, CFISAN), the others should run the target with
 no sanitizers compiled in.
diff --git a/docs/perf_tips.md b/docs/perf_tips.md
index fbcb4d8d..c5968206 100644
--- a/docs/perf_tips.md
+++ b/docs/perf_tips.md
@@ -69,9 +69,6 @@ If you are only interested in specific parts of the code being fuzzed, you can
 instrument_files the files that are actually relevant. This improves the speed and
 accuracy of afl. See instrumentation/README.instrument_list.md
 
-Also use the InsTrim mode on larger binaries, this improves performance and
-coverage a lot.
-
 ## 4. Profile and optimize the binary
 
 Check for any parameters or settings that obviously improve performance. For
diff --git a/docs/status_screen.md b/docs/status_screen.md
index 0329d960..e3abcc5f 100644
--- a/docs/status_screen.md
+++ b/docs/status_screen.md
@@ -251,8 +251,9 @@ exceed it by a margin sufficient to be classified as hangs.
   | arithmetics : 53/2.54M, 0/537k, 0/55.2k             |
   |  known ints : 8/322k, 12/1.32M, 10/1.70M            |
   |  dictionary : 9/52k, 1/53k, 1/24k                   |
-  |       havoc : 1903/20.0M, 0/0                       |
-  |        trim : 20.31%/9201, 17.05%                   |
+  |havoc/splice : 1903/20.0M, 0/0                       |
+  |py/custom/rq : unused, 53/2.54M, unused              |
+  |    trim/eff : 20.31%/9201, 17.05%                   |
   +-----------------------------------------------------+
 ```
 
@@ -268,6 +269,12 @@ goal. Finally, the third number shows the proportion of bytes that, although
 not possible to remove, were deemed to have no effect and were excluded from
 some of the more expensive deterministic fuzzing steps.
 
+Note that when deterministic mutation mode is off (which is the default
+because it is not very efficient) the first five lines display
+"disabled (default, enable with -D)".
+
+Only what is activated will have counter shown.
+
 ### Path geometry
 
 ```