v3.13c release (#951)

* persistent replay env setup

* implementation without testing

* complete implemenation, still no test

* fix

* fixes

* fixes

* documentation for AFL_PERSISTENT_RECORD

* afl-cmin: Allow @@ to be part of an arg

The previous implementation of "@@ handling"
in afl-cmin differed greatly from how it was
handled in afl-fuzz and how the documentation presented it.

It used to require that the @@ be its own argument separated
by whitespace and could not be used in situations like "--file=@@".

This change standardizes it to just look for @@ to be *in* an argument
in the same manner that afl-cmin.bash does, so that it will have
the expected and documented behavior.

* triage_crashes.sh: Allow @@ to be part of an arg

* triage_crashes.sh: Fix error reporting

* afl-showmap: Allow @@ to be part of an arg

The previous implementation of "@@ handling"
in afl-showmap differed greatly from how it was
handled in afl-fuzz and how the documentation presented it.

It used to require that the @@ be its own argument separated
by whitespace and could not be used in situations like "--file=@@".

This change standardizes it to use detect_file_args() like
everybody else does, so that it will have the expected and
documented behavior.

* afl-showmap: Unwind a change to keep it pre-C99 compatible

* v3.13a init

* ifdef for record

* changelog info

* AFL_PERSISTENT_RECORD not a default

* Add support for FRIDA mode

* support libraries for find_afl_binary

* remove warnings

* update dynamic list

* update changelog

* try to trigger github actions

* try to trigger github actions

* android: support host and target 32bit build

* remove InsTrim

* Fix support for afl-cmin and updated README

* integrate frida_mode, code-format

* update README

* Update custom_mutators.md

* fix compilation for llvm 3.8.0

* pass lib -ldl only on Linux platforms

* typos

* simpler argument processing

* -m32 support for docker container

* restructure havoc

* add introspection

* ensure one fuzzer sync per cycle, cycle introspection

* remove unneeded var

* add parallel builds

* add parallel builds

* Add network_proxy build targets to gitignore (#852)

All other build targets in utils/ are ignored except for these due to
the lack of file extension.

* Fixes: 6d2ac3e3140 ("fix grammar download script")

The git submodle entry point is "grammar_mutator" not "grammar-mutator"

The build script fails without this

* fix #if A == B always evalutes to true

* try to avoid CI build failure by updating apt packages

* fix k-ctx

* Initialalize the autodict-ql

Initialalize the autodict-ql
add codeql scripts

* update the codes, readme

- add readme
- add required qlpack.yml

* update readme

update readme

* Update readme

Update readme

* Update readme

Update readme

* rename python file

rename python file

* update

update

* Add shell command

Add shell command

* update readme

update readme

* Add support for standalone leak-sanitizer, introducting the environment
variable AFL_USE_LSAN.

AFL_USE_LSAN introduces the macro __AFL_CHECK_LEAK() which will check
for a memory leak when the macro is run. This is especially helpful
when using __AFL_LOOP().

If __AFL_LEAK_CHECK() is not used when AFL_USE_LSAN=1 is set,
the leak checker will run when the program exits.

* Replace __AFL_CHECK_LEAK with __AFL_LEAK_CHECK to be more proper.

Fix spelling mistakes.

Correctly call LSAN_ERROR not MSAN_ERROR.

* Some updates on readme

Some updates on readme

* Update readme

Update readme

* Updates

update

* finalize 1

commit final things

* space

space

* remove things

remove things

* Add python scripts

Add python scripts

* Update python scripts

Update python scripts

* new commit - change strings

new commit - change strings

* update qlpack name

update qlpack name

* remove unessential things

remove unessential things from scripts

* remove dirs

remove dirs

* Update readme

Update readme

* Add note

Add note

* Add `

Add `

* change cur

change current dir

* Fix typos,
Use symbolize=0 for LSAN,
Remove syntactic sugar.

* Remove check for exit_code on LSAN and replace it with check for
symbolize=0.

* Move definition of __AFL_LEAK_CHECK inside ifguards,
use LSAN_OPTIONS=print_suppressions=0

* revert Heiko's commit

* Fix Haiku references, no <sys/syscall.h> and missing defines for USEMMAP

* cleanup

* Add -lnetwork to dependencies for Haiku

* fix conflict

* Fix undeclared SYS_write on Haiku

* Declare private api __kern_write for Haiku

* better MacOs msg

* Haiku: create directory for debug_server, if not present

* add missing env

* better understandable directory creation logic

* android: disable sigaction inside debuggerd

check https://github.com/google/AFL/blob/master/docs/INSTALL#L173

* fix forkserver timeout error msg

* removed -lc++ linking for lto

* fix afl_custom_queue_new_entry when syncing

* update grammar-mutator, show better fuzzing strategy yields

* Update ideas.md

Hey, I noticed there was a spelling error in above documentation for GSOC '21. I have corrected it, you can have a look at it if you want.

* display dictionary usage in havoc only mode

* ui custom mutator only display

* add AFL_EXIT_ON_SEED_ISSUES

* afl-whatsup -d

* fix alive count in afl-whatsup

* update havoc

* ui update

* fix aflpp qemu hook

* qemu driver new api

* add readme

* update readme

* allow aflpp_qemu_driver_hook.o to fail

* fix writing stat file on exit

* remove duplicate plot file write

* fix warnings

* afl-whatsup -d fix

* fix ui

* update readme

* qemuafl

* fix compcovtest

* fix compcovtest

* fix compcovtest

* cmplog -l3: disable trimming, forcing input2stage for all

* autoformat with black

* fix nits

* Changes following code review

* fix nits

* update docs

* review

* Add newline

Add newline

* Update readme

fix typo in readme

* Add new line

Add new line

* fixes

* fix compcovtest

* fix compcovtest

* code format for frida mode

* reworked formatting in order to avoid gcc 8.3.0 warnings

* add idea of thread-safe target feedback

* fix-typo: "WIn32" -> "Win32"

* fix custom trim for increasing data

* drop support for llvm < 6.0

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

* Push to stable (#895)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>

* Push to stable (#927)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* push to stable (#931)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* Final push to stable (#936)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

* push to stable (#931) (#932)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* improve error msg

* Added documentation for wine LoadLibrary workaround (#933)

* Fix cmake target compilation command example (#934)

- Fix typo DCMAKE_C_COMPILERC -> DCMAKE_C_COMPILER.
- Add `cd build` after `mkdir build`.

* showmap passes queue items in alphabetical order

* added tmp files to gitignore

* lenient dict parsing, no map size enum for binary fuzzing

* added info about showmap queue directions

* update binary-only doc

* turn off map size detection if skip_bin_check is set

* Typo

* update docs

* update afl-system-config

* Set kill signal before using it in afl-showmap (#935)

* fix afl-cc help output

* add libafl to binary-only doc

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>
Co-authored-by: 0x4d5a-ctf <51098072+0x4d5a-ctf@users.noreply.github.com>
Co-authored-by: Tommy Chiang <oToToT@users.noreply.github.com>
Co-authored-by: buherator <buherator@silentsignal.hu>

* final push to stable (really?) (#939)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

* push to stable (#931) (#932)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* improve error msg

* Added documentation for wine LoadLibrary workaround (#933)

* Fix cmake target compilation command example (#934)

- Fix typo DCMAKE_C_COMPILERC -> DCMAKE_C_COMPILER.
- Add `cd build` after `mkdir build`.

* showmap passes queue items in alphabetical order

* added tmp files to gitignore

* lenient dict parsing, no map size enum for binary fuzzing

* added info about showmap queue directions

* update binary-only doc

* turn off map size detection if skip_bin_check is set

* Typo

* update docs

* update afl-system-config

* Set kill signal before using it in afl-showmap (#935)

* fix afl-cc help output

* add libafl to binary-only doc

* update docs

* less executions on variable paths

* AFL_SKIP_CRASHES is obsolete since 3.0

* add AFL_TRY_AFFINITY

* Typo

* Typo

* Typo/wording

* tweaks

* typos

* fix afl-whatsup help output

* fix afl-plot output

* fix for MacOS

* fix cmpcov doc for qemu

* fix tmpfile removal

* update dockerfile

* Frida (#940)

* Added re2 test

* Added libpcap test

* Fix validation of setting of ADDR_NO_RANDOMIZE

* Added support for printing original and instrumented code

Co-authored-by: Your Name <you@example.com>

* Support for AFL_FRIDA_PERSISTENT_RET (#941)

Co-authored-by: Your Name <you@example.com>

* Changes to add missing exclusion of ranges (#943)

Co-authored-by: Your Name <you@example.com>

* add --afl-noopt to afl-cc

* docs: fix link to README in QuickStartGuide (#946)

* Support writing Stalker stats (#945)

* Support writing Stalker stats

* Fixed string handling in print functions

Co-authored-by: Your Name <you@example.com>

* afl-cmin help fix, aflpp_driver - + @@ support

* fix for afl-showmap

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>
Co-authored-by: 0x4d5a-ctf <51098072+0x4d5a-ctf@users.noreply.github.com>
Co-authored-by: Tommy Chiang <oToToT@users.noreply.github.com>
Co-authored-by: buherator <buherator@silentsignal.hu>
Co-authored-by: Dag Heyman Kajevic <dag.heyman@gmail.com>

* Dev (#949)

* use atomic read-modify-write increment for LLVM CLASSIC

* Change other LLVM modes to atomic increments

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* work in progress: not working correctly yet

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* still not working

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* first working NeverZero implementation

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* add some comments

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

* push to stable (#931) (#932)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* improve error msg

* Added documentation for wine LoadLibrary workaround (#933)

* Fix cmake target compilation command example (#934)

- Fix typo DCMAKE_C_COMPILERC -> DCMAKE_C_COMPILER.
- Add `cd build` after `mkdir build`.

* showmap passes queue items in alphabetical order

* added tmp files to gitignore

* lenient dict parsing, no map size enum for binary fuzzing

* added info about showmap queue directions

* update binary-only doc

* turn off map size detection if skip_bin_check is set

* Typo

* update docs

* update afl-system-config

* Set kill signal before using it in afl-showmap (#935)

* fix afl-cc help output

* add libafl to binary-only doc

* update docs

* less executions on variable paths

* AFL_SKIP_CRASHES is obsolete since 3.0

* add AFL_TRY_AFFINITY

* Typo

* Typo

* Typo/wording

* tweaks

* typos

* fix afl-whatsup help output

* fix afl-plot output

* fix for MacOS

* fix cmpcov doc for qemu

* fix tmpfile removal

* update dockerfile

* Frida (#940)

* Added re2 test

* Added libpcap test

* Fix validation of setting of ADDR_NO_RANDOMIZE

* Added support for printing original and instrumented code

Co-authored-by: Your Name <you@example.com>

* Support for AFL_FRIDA_PERSISTENT_RET (#941)

Co-authored-by: Your Name <you@example.com>

* Changes to add missing exclusion of ranges (#943)

Co-authored-by: Your Name <you@example.com>

* add --afl-noopt to afl-cc

* docs: fix link to README in QuickStartGuide (#946)

* Support writing Stalker stats (#945)

* Support writing Stalker stats

* Fixed string handling in print functions

Co-authored-by: Your Name <you@example.com>

* afl-cmin help fix, aflpp_driver - + @@ support

* fix for afl-showmap

* support new env var AFL_LLVM_THREADSAFE_INST to enable atomic counters.
add new test case for that.

* add documentation for AFL_LLVM_THREADSAFE_INST

* add support for AFL_LLVM_THREADSAFE_INST to other LLVM passes

* add missing include for _exit()

* threadsafe doc fixes, code format

* Wording: "never zero" -> NeverZero

* fix afl_custom_post_process with multiple custom mutators

* fix docs

* debug ck_write

* fixed potential diff by 0

* fixes

* fix classic threadsafe counters

Co-authored-by: van Hauser <vh@thc.org>
Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>
Co-authored-by: 0x4d5a-ctf <51098072+0x4d5a-ctf@users.noreply.github.com>
Co-authored-by: Tommy Chiang <oToToT@users.noreply.github.com>
Co-authored-by: buherator <buherator@silentsignal.hu>
Co-authored-by: Dag Heyman Kajevic <dag.heyman@gmail.com>

* v3.13c release (#950)

* use atomic read-modify-write increment for LLVM CLASSIC

* Change other LLVM modes to atomic increments

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* work in progress: not working correctly yet

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* still not working

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* first working NeverZero implementation

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* add some comments

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

* push to stable (#931) (#932)

* sync (#886)

* Create FUNDING.yml

* Update FUNDING.yml

* moved custom_mutator examples

* unicorn speedtest makefile cleanup

* fixed example location

* fix qdbi

* update util readme

* Frida persistent (#880)

* Added x64 support for persistent mode (function call only), in-memory teest cases and complog

* Review changes, fix NeverZero and code to parse the .text section of the main executable. Excluded ranges TBC

* Various minor fixes and finished support for AFL_INST_LIBS

* Review changes

Co-authored-by: Your Name <you@example.com>

* nits

* fix frida mode

* Integer overflow/underflow fixes in libdislocator (#889)

* libdislocator: fixing integer overflow in 'max_mem' variable and setting 'max_mem' type to 'size_t'

* libdislocator: fixing potential integer underflow in 'total_mem' variable due to its different values in different threads

* Bumped warnings up to the max and fixed remaining issues (#890)

Co-authored-by: Your Name <you@example.com>

* nits

* frida mode - support non-pie

* nits

* nit

* update grammar mutator

* Fixes for aarch64, OSX and other minor issues (#891)

Co-authored-by: Your Name <you@example.com>

* nits

* nits

* fix PCGUARD, build aflpp_driver with fPIC

* Added representative fuzzbench test and test for libxml (#893)

* Added representative fuzzbench test and test for libxml

* Added support for building FRIDA from source with FRIDA_SOURCE=1

Co-authored-by: Your Name <you@example.com>

* nits

* update changelog

* typos

* fixed potential double free in custom trim (#881)

* error handling, freeing mem

* frida: complog -> cmplog

* fix statsd writing

* let aflpp_qemu_driver_hook.so build fail gracefully

* fix stdin trimming

* Support for AFL_ENTRYPOINT (#898)

Co-authored-by: Your Name <you@example.com>

* remove the input file .cur_input at the end of the fuzzing, if AFL_TMPDIR is used

* reverse push (#901)

* Create FUNDING.yml

* Update FUNDING.yml

* disable QEMU static pie

Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>

* clarify that no modifications are required.

* add new test for frida_mode (please review)

* typos

* fix persistent mode (64-bit)

* set ARCH for linux intel 32-bit for frida-gum-devkit

* prepare for 32-bit support (later)

* not on qemu 3 anymore

* unicorn mips fixes

* instrumentation further move to C++11 (#900)

* unicorn fixes

* more unicorn fixes

* Fix memory errors when trim causes testcase growth (#881) (#903)

* Revert "fixed potential double free in custom trim (#881)"

This reverts commit e9d2f72382cab75832721d859c3e731da071435d.

* Revert "fix custom trim for increasing data"

This reverts commit 86a8ef168dda766d2f25f15c15c4d3ecf21d0667.

* Fix memory errors when trim causes testcase growth

Modify trim_case_custom to avoid writing into in_buf because
some custom mutators can cause the testcase to grow rather than
shrink.

Instead of modifying in_buf directly, we write the update out
to the disk when trimming is complete, and then the caller is
responsible for refreshing the in-memory buffer from the file.

This is still a bit sketchy because it does need to modify q->len in
order to notify the upper layers that something changed, and it could
end up telling upper layer code that the q->len is *bigger* than
the buffer (q->testcase_buf) that contains it, which is asking
for trouble down the line somewhere...

* Fix an unlikely situation

Put back some `unlikely()` calls that were in
the e9d2f72382cab75832721d859c3e731da071435d commit that was
reverted.

* typo

* Exit on time (#904)

* Variable AFL_EXIT_ON_TIME description has been added.
Variables AFL_EXIT_ON_TIME and afl_exit_on_time has been added.
afl->exit_on_time variable initialization has been added.
The asignment of a value to the afl->afl_env.afl_exit_on_time variable from
environment variables has been added.
Code to exit on timeout if new path not found has been added.

* Type of afl_exit_on_time variable has been changed.
Variable exit_on_time has been added to the afl_state_t structure.

* Command `export AFL_EXIT_WHEN_DONE=1` has been added.

* Millisecond to second conversion has been added.
Call get_cur_time() has been added.

* Revert to using the saved current time value.

* Useless check has been removed.

* fix new path to custom-mutators

* ensure crashes/README.txt exists

* fix

* Changes to bump FRIDA version and to clone FRIDA repo in to build directory rather than use a submodule as the FRIDA build scripts don't like it (#906)

Co-authored-by: Your Name <you@example.com>

* Fix numeric overflow in cmplog implementation (#907)

Co-authored-by: Your Name <you@example.com>

* testcase fixes for unicorn

* remove merge conflict artifacts

* fix afl-plot

* Changes to remove binaries from frida_mode (#913)

Co-authored-by: Your Name <you@example.com>

* Frida cmplog fail fast (#914)

* Changes to remove binaries from frida_mode

* Changes to make cmplog fail fast

Co-authored-by: Your Name <you@example.com>

* afl-plot: relative time

* arch linux and mac os support for afl-system-config

* typo

* code-format

* update documentation

* github workflow for qemu

* OSX-specific improvements (#912)

* Fix afl-cc to work correctly by default on OSX using xcode

- CLANG_ENV_VAR must be set for afl-as to work
- Use clang mode by default if no specific compiler selected

* Add OSX-specific documentation for configuring shared memory

* Fixes to memory operands for complog (#916)

Co-authored-by: Your Name <you@example.com>

* fix a few cur_time uses

* added bounds check to pivot_inputs (fixes #921)

* additional safety checks for restarts

* restrict afl-showmap in_file size

* fix seed crash disable

* add warning for afl-showmap partial read

* no core dumps

* AFL_PRINT_FILENAMES added

* more documentation for AFL_EXIT_ON_TIME

* Flushing for AFL_PRINT_FILENAMES

* FASAN Support (#918)

* FASAN Support

* Fix handling of Address Sanitizer DSO

* Changes to identification of Address Sanitizer DSO

Co-authored-by: Your Name <you@example.com>

* Support for x86 (#920)

Co-authored-by: Your Name <you@example.com>

* Update frida_mode readme (#925)

* libqasan: use syscalls for read and write

* update readme

* Minor integration tweaks (#926)

Co-authored-by: Your Name <you@example.com>

* merge

* fix afl-fuzz.c frida preload

* cleaned up AFL_PRINT_FILENAMES env

* Changes to have persistent mode exit at the end of the loop (#928)

Co-authored-by: Your Name <you@example.com>

* fix llvm-dict2file

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>

* improve error msg

* Added documentation for wine LoadLibrary workaround (#933)

* Fix cmake target compilation command example (#934)

- Fix typo DCMAKE_C_COMPILERC -> DCMAKE_C_COMPILER.
- Add `cd build` after `mkdir build`.

* showmap passes queue items in alphabetical order

* added tmp files to gitignore

* lenient dict parsing, no map size enum for binary fuzzing

* added info about showmap queue directions

* update binary-only doc

* turn off map size detection if skip_bin_check is set

* Typo

* update docs

* update afl-system-config

* Set kill signal before using it in afl-showmap (#935)

* fix afl-cc help output

* add libafl to binary-only doc

* update docs

* less executions on variable paths

* AFL_SKIP_CRASHES is obsolete since 3.0

* add AFL_TRY_AFFINITY

* Typo

* Typo

* Typo/wording

* tweaks

* typos

* fix afl-whatsup help output

* fix afl-plot output

* fix for MacOS

* fix cmpcov doc for qemu

* fix tmpfile removal

* update dockerfile

* Frida (#940)

* Added re2 test

* Added libpcap test

* Fix validation of setting of ADDR_NO_RANDOMIZE

* Added support for printing original and instrumented code

Co-authored-by: Your Name <you@example.com>

* Support for AFL_FRIDA_PERSISTENT_RET (#941)

Co-authored-by: Your Name <you@example.com>

* Changes to add missing exclusion of ranges (#943)

Co-authored-by: Your Name <you@example.com>

* add --afl-noopt to afl-cc

* docs: fix link to README in QuickStartGuide (#946)

* Support writing Stalker stats (#945)

* Support writing Stalker stats

* Fixed string handling in print functions

Co-authored-by: Your Name <you@example.com>

* afl-cmin help fix, aflpp_driver - + @@ support

* fix for afl-showmap

* support new env var AFL_LLVM_THREADSAFE_INST to enable atomic counters.
add new test case for that.

* add documentation for AFL_LLVM_THREADSAFE_INST

* add support for AFL_LLVM_THREADSAFE_INST to other LLVM passes

* add missing include for _exit()

* threadsafe doc fixes, code format

* Wording: "never zero" -> NeverZero

* fix afl_custom_post_process with multiple custom mutators

* fix docs

* debug ck_write

* fixed potential diff by 0

* fixes

* fix classic threadsafe counters

* v3.13c release

Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>
Co-authored-by: 0x4d5a-ctf <51098072+0x4d5a-ctf@users.noreply.github.com>
Co-authored-by: Tommy Chiang <oToToT@users.noreply.github.com>
Co-authored-by: buherator <buherator@silentsignal.hu>
Co-authored-by: Dag Heyman Kajevic <dag.heyman@gmail.com>

Co-authored-by: realmadsci <71108352+realmadsci@users.noreply.github.com>
Co-authored-by: hexcoder <hexcoder-@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Jiangen Jiao <joeyjiaojg@qq.com>
Co-authored-by: Yong-Hao Zou <yonghaoz1994@gmail.com>
Co-authored-by: hexcoder- <heiko@hexco.de>
Co-authored-by: R. Elliott Childre <elliottchildre329@gmail.com>
Co-authored-by: microsvuln <55649192+Microsvuln@users.noreply.github.com>
Co-authored-by: Joshua Rogers <jrogers@opera.com>
Co-authored-by: begasus <begasus@gmail.com>
Co-authored-by: Ujjwal Kirti <64329707+ujjwalkirti@users.noreply.github.com>
Co-authored-by: Andrea Fioraldi <andreafioraldi@gmail.com>
Co-authored-by: Dominik Maier <domenukk@gmail.com>
Co-authored-by: veritas501 <hxzene@gmail.com>
Co-authored-by: WorksButNotTested <62701594+WorksButNotTested@users.noreply.github.com>
Co-authored-by: Dmitry Zheregelya <zheregelya.d@gmail.com>
Co-authored-by: David CARLIER <devnexen@gmail.com>
Co-authored-by: Roman M. Iudichev <SecNotice@ya.ru>
Co-authored-by: Dustin Spicuzza <dustin@virtualroadside.com>
Co-authored-by: 0x4d5a-ctf <51098072+0x4d5a-ctf@users.noreply.github.com>
Co-authored-by: Tommy Chiang <oToToT@users.noreply.github.com>
Co-authored-by: buherator <buherator@silentsignal.hu>
Co-authored-by: Dag Heyman Kajevic <dag.heyman@gmail.com>

4 files changed, 240 insertions, 0 deletions

diff --git a/frida_mode/test/cmplog/GNUmakefile b/frida_mode/test/cmplog/GNUmakefile
new file mode 100644
index 00000000..40de6a09
--- /dev/null
+++ b/frida_mode/test/cmplog/GNUmakefile
@@ -0,0 +1,69 @@
+PWD:=$(shell pwd)/
+ROOT:=$(shell realpath $(PWD)../../../)/
+BUILD_DIR:=$(PWD)build/
+
+TEST_CMPLOG_SRC=$(PWD)cmplog.c
+TEST_CMPLOG_OBJ=$(BUILD_DIR)compcovtest
+
+TEST_BIN:=$(PWD)../../build/test
+
+
+TEST_DATA_DIR:=$(BUILD_DIR)in/
+CMP_LOG_INPUT:=$(TEST_DATA_DIR)in
+QEMU_OUT:=$(BUILD_DIR)qemu-out
+FRIDA_OUT:=$(BUILD_DIR)frida-out
+
+.PHONY: all 32 clean qemu frida format
+
+all: $(TEST_CMPLOG_OBJ)
+	make -C $(ROOT)frida_mode/
+
+32:
+	CFLAGS="-m32" LDFLAGS="-m32" ARCH="x86" make all
+
+$(BUILD_DIR):
+	mkdir -p $@
+
+$(TEST_DATA_DIR): | $(BUILD_DIR)
+	mkdir -p $@
+
+$(CMP_LOG_INPUT): | $(TEST_DATA_DIR)
+	echo -n "zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz" > $@
+
+$(TEST_CMPLOG_OBJ): $(TEST_CMPLOG_SRC) | $(BUILD_DIR)
+	$(CXX) -std=c++11 -g $(CFLAGS) $(LDFLAGS) $< -o $@
+
+qemu: $(TEST_CMPLOG_OBJ) $(CMP_LOG_INPUT)
+	$(ROOT)afl-fuzz \
+		-Q \
+		-i $(TEST_DATA_DIR) \
+		-o $(QEMU_OUT) \
+		-c 0 \
+		-l 3AT \
+		-Z \
+		-- \
+			$(TEST_CMPLOG_OBJ) @@
+
+frida: $(TEST_CMPLOG_OBJ) $(CMP_LOG_INPUT)
+	$(ROOT)afl-fuzz \
+		-O \
+		-i $(TEST_DATA_DIR) \
+		-o $(FRIDA_OUT) \
+		-c 0 \
+		-l 3AT \
+		-Z \
+		-- \
+			$(TEST_CMPLOG_OBJ) @@
+
+debug: $(TEST_CMPLOG_OBJ) $(CMP_LOG_INPUT)
+	gdb \
+		--ex 'set environment LD_PRELOAD=$(ROOT)afl-frida-trace.so' \
+		--ex 'set disassembly-flavor intel' \
+		--ex 'r $(CMP_LOG_INPUT)' \
+		--args $(TEST_CMPLOG_OBJ) $(CMP_LOG_INPUT)
+
+clean:
+	rm -rf $(BUILD_DIR)
+
+format:
+	cd $(ROOT) && echo $(TEST_CMPLOG_SRC) | xargs -L1 ./.custom-format.py -i
diff --git a/frida_mode/test/cmplog/Makefile b/frida_mode/test/cmplog/Makefile
new file mode 100644
index 00000000..606b43a5
--- /dev/null
+++ b/frida_mode/test/cmplog/Makefile
@@ -0,0 +1,22 @@
+all:
+	@echo trying to use GNU make...
+	@gmake all || echo please install GNUmake
+
+32:
+	@echo trying to use GNU make...
+	@gmake 32 || echo please install GNUmake
+
+clean:
+	@gmake clean
+
+qemu:
+	@gmake qemu
+
+frida:
+	@gmake frida
+
+format:
+	@gmake format
+
+debug:
+	@gmake debug
diff --git a/frida_mode/test/cmplog/cmplog.c b/frida_mode/test/cmplog/cmplog.c
new file mode 100644
index 00000000..99010645
--- /dev/null
+++ b/frida_mode/test/cmplog/cmplog.c
@@ -0,0 +1,100 @@
+/////////////////////////////////////////////////////////////////////////
+//
+// Author: Mateusz Jurczyk (mjurczyk@google.com)
+//
+// Copyright 2019-2020 Google LLC
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+// solution: echo -ne 'The quick brown fox jumps over the lazy
+// dog\xbe\xba\xfe\xca\xbe\xba\xfe\xca\xde\xc0\xad\xde\xef\xbe' | ./compcovtest
+
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+int main(int argc, char **argv) {
+
+  char buffer[44] = {/* zero padding */};
+
+  FILE *file = stdin;
+
+  if (argc > 1) {
+
+    if ((file = fopen(argv[1], "r")) == NULL) {
+
+      perror(argv[1]);
+      exit(-1);
+
+    }
+
+  }
+
+  fread(buffer, 1, sizeof(buffer) - 1, file);
+
+  if (memcmp(&buffer[0], "The quick brown fox ", 20) != 0 ||
+      strncmp(&buffer[20], "jumps over ", 11) != 0 ||
+      strcmp(&buffer[31], "the lazy dog") != 0) {
+
+    if (argc > 1) { fclose(file); }
+    return 1;
+
+  }
+
+#if defined(__x86_64__)
+  uint64_t x = 0;
+  fread(&x, sizeof(x), 1, file);
+  if (x != 0xCAFEBABECAFEBABE) {
+
+    if (argc > 1) { fclose(file); }
+    return 2;
+
+  }
+
+#endif
+
+  uint32_t y = 0;
+  fread(&y, sizeof(y), 1, file);
+
+  if (y != 0xDEADC0DE) {
+
+    if (argc > 1) { fclose(file); }
+    return 3;
+
+  }
+
+  uint16_t z = 0;
+  fread(&z, sizeof(z), 1, file);
+
+  switch (z) {
+
+    case 0xBEEF:
+      break;
+
+    default:
+      if (argc > 1) { fclose(file); }
+      return 4;
+
+  }
+
+  printf("Puzzle solved, congrats!\n");
+  abort();
+
+  if (argc > 1) { fclose(file); }
+
+  return 0;
+
+}
+
diff --git a/frida_mode/test/cmplog/get_section_addrs.py b/frida_mode/test/cmplog/get_section_addrs.py
new file mode 100755
index 00000000..f648808b
--- /dev/null
+++ b/frida_mode/test/cmplog/get_section_addrs.py
@@ -0,0 +1,49 @@
+#!/usr/bin/env python3
+import argparse
+from elftools.elf.elffile import ELFFile
+
+
+def process_file(file, section, base):
+    with open(file, "rb") as f:
+        for sect in ELFFile(f).iter_sections():
+            if sect.name == section:
+                start = base + sect.header["sh_offset"]
+                end = start + sect.header["sh_size"]
+                print("0x%016x-0x%016x" % (start, end))
+                return
+
+    print("Section '%s' not found in '%s'" % (section, file))
+
+
+def hex_value(x):
+    return int(x, 16)
+
+
+def main():
+    parser = argparse.ArgumentParser(description="Process some integers.")
+    parser.add_argument(
+        "-f", "--file", dest="file", type=str, help="elf file name", required=True
+    )
+    parser.add_argument(
+        "-s",
+        "--section",
+        dest="section",
+        type=str,
+        help="elf section name",
+        required=True,
+    )
+    parser.add_argument(
+        "-b",
+        "--base",
+        dest="base",
+        type=hex_value,
+        help="elf base address",
+        required=True,
+    )
+
+    args = parser.parse_args()
+    process_file(args.file, args.section, args.base)
+
+
+if __name__ == "__main__":
+    main()